Ajeet Rohatgi
#143,503
Most Influential Person Now
Ajeet Rohatgi's AcademicInfluence.com Rankings
Ajeet Rohatgiengineering Degrees
Engineering
#5492
World Rank
#6752
Historical Rank
Electrical Engineering
#1534
World Rank
#1628
Historical Rank
Applied Physics
#1598
World Rank
#1630
Historical Rank

Download Badge
Engineering
Why Is Ajeet Rohatgi Influential?
(Suggest an Edit or Addition)Ajeet Rohatgi's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Impurities in silicon solar cells (1980) (410)
- Analysis and performance assessment of the active frequency drift method of islanding prevention (1999) (365)
- Determining the relative effectiveness of islanding detection methods using phase criteria and nondetection zones (2000) (321)
- Development of a Methodology for Improving Photovoltaic Inverter Reliability (2008) (224)
- The effects of CdCl2 on the electronic properties of molecular‐beam epitaxially grown CdTe/CdS heterojunction solar cells (1991) (162)
- Recloser allocation for improved reliability of DG-enhanced distribution networks (2006) (160)
- Hydrogen in silicon: a discussion of diffusion and passivation mechanisms. (1996) (150)
- A miniaturized high-voltage solar cell array as an electrostatic MEMS power supply (1995) (149)
- Impact of renewable distributed generation on power systems (2001) (143)
- Characterization and optimization of absorbing plasma-enhanced chemical vapor deposited antireflection coatings for silicon photovoltaics. (1997) (139)
- Prevention of islanding in grid‐connected photovoltaic systems (1999) (127)
- Effect of Ag Particle Size in Thick-Film Ag Paste on the Electrical and Physical Properties of Screen Printed Contacts and Silicon Solar Cells (2006) (123)
- Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells (2006) (118)
- Impurity effects in silicon for high efficiency solar cells (1986) (112)
- An optimized rapid aluminum back surface field technique for silicon solar cells (1999) (111)
- Effect of titanium, copper and iron on silicon solar cells (1980) (110)
- Ray tracing analysis of the inverted pyramid texturing geometry for high efficiency silicon solar cells (1993) (105)
- High-Throughput Ion-Implantation for Low-Cost High-Efficiency Silicon Solar Cells (2012) (101)
- Superhydrophobic and low light reflectivity silicon surfaces fabricated by hierarchical etching. (2008) (98)
- Spectroscopic ellipsometry characterization of thin-film silicon nitride (1997) (97)
- Rapid and Accurate Determination of Series Resistance and Fill Factor Losses in Industrial Silicon Solar Cells (2001) (96)
- A novel and effective PECVD SiO/sub 2//SiN antireflection coating for Si solar cells (1993) (92)
- Hybridizing ZnO Nanowires with Micropyramid Silicon Wafers as Superhydrophobic High‐Efficiency Solar Cells (2012) (90)
- Effects of stoichiometry on thermal stability of undoped, semi‐insulating GaAs (1982) (86)
- Large area tunnel oxide passivated rear contact n‐type Si solar cells with 21.2% efficiency (2016) (80)
- Factors Limiting the Formation of Uniform and Thick Aluminum–Back-Surface Field and Its Potential (2006) (78)
- Design, fabrication, and analysis of 17-18-percent efficient surface-passivated silicon solar cells (1984) (76)
- Understanding the Formation and Temperature Dependence of Thick-Film Ag Contacts on High-Sheet-Resistance Si Emitters for Solar Cells (2005) (74)
- The deep level transient spectroscopy studies of a ZnO varistor as a function of annealing (1988) (73)
- Plasma-enhanced chemical-vapor-deposited oxide for low surface recombination velocity and high effective lifetime in silicon (1993) (73)
- Effects of Cu on CdTe / CdS Heterojunction Solar Cells with Au/Cu Contacts (1995) (72)
- Gettering and hydrogen passivation of edge‐defined film‐fed grown multicrystalline silicon solar cells by Al diffusion and forming gas anneal (1994) (72)
- Hydrogenation of Si from SiNx(H) films: Characterization of H introduced into the Si (2003) (72)
- Development of screen-printed silicon solar cells with high fill factors on 100 /spl Omega//sq emitters (2004) (71)
- Correlations between CdTe/CdS/SnO2/glass solar cell performance and the interface/surface properties (1996) (71)
- Comprehensive study of rapid, low-cost silicon surface passivation technologies (2000) (68)
- Rie-texturing of multicrystalline silicon solar cells (2002) (67)
- Photoluminescence study of ZnO varistor stability (1995) (66)
- Hierarchical robust textured structures for large scale self-cleaning black silicon solar cells (2014) (65)
- Growth and process optimization of CdTe and CdZnTe polycrystalline films for high efficiency solar cells (1991) (64)
- Review and Understanding of Screen-Printed Contacts and Selective-Emitter Formation: Preprint (2004) (61)
- Titanium in silicon as a deep level impurity (1979) (60)
- Integration of Photovoltaic Distributed Generation in the Power Distribution Grid (2012) (59)
- Copper migration in cdte heterojunction solar cells (1996) (58)
- A study of grown-in impurities in silicon by deep-level transient spectroscopy (1983) (55)
- Investigation of polycrystalline CdZnTe, CdMnTe, and CdTe films for photovoltaic applications (1989) (54)
- Aluminum alloy back p–n junction dendritic web silicon solar cell (2001) (51)
- Optimization of SiN AR coating for Si solar cells and modules through quantitative assessment of optical and efficiency loss mechanism (2011) (50)
- Effects of rapid thermal anneal on refractive index and hydrogen content of plasma‐enhanced chemical vapor deposited silicon nitride films (1996) (49)
- The impact of molybdenum on silicon and silicon solar cell performance (1980) (48)
- Chemical etching of boron-rich layer and its impact on high efficiency n-type silicon solar cells (2012) (48)
- Electrical and Optical Properties of Tin Oxide Films (1974) (47)
- High-efficiency solar cells on edge-defined film-fed grown (18.2%) and string ribbon (17.8%) silicon by rapid thermal processing (2004) (47)
- The impact of MOCVD growth ambient on carrier transport, defects, and performance of CdTe/CdS heterojunction solar cells (1994) (45)
- Record high recombination lifetime in oxidized magnetic Czochralski silicon (1991) (44)
- Approach toward high efficiency CdTe/CdS heterojunction solar cells (1996) (44)
- Quantitative analysis of the levelized cost of electricity of commercial scale photovoltaics systems in the US (2016) (44)
- Ion-implanted and screen-printed large area 20% efficient N-type front junction Si solar cells (2014) (42)
- High-Efficiency Large-Area Rear Passivated Silicon Solar Cells With Local Al-BSF and Screen-Printed Contacts (2011) (42)
- A STUDY OF EFFICIENCY LIMITING DEFECTS IN POLYCRYSTALLINE CdTe/CdS SOLAR CELLS (1992) (41)
- Record high 18.6% efficient solar cell on HEM multicrystalline material (1996) (41)
- Thin silicon string ribbon (1997) (40)
- Concentration and penetration depth of H introduced into crystalline Si by hydrogenation methods used to fabricate solar cells (2006) (39)
- High efficiency multicrystalline silicon solar cells (1994) (39)
- Quantitative techniques for analysis of large data sets in renewable distributed generation (2004) (39)
- Characterization of ZnO varistor degradation using lifetime positron‐annihilation spectroscopy (1991) (39)
- A new methodology for separating Shockley-Read-Hall lifetime and Auger recombination coefficients from the photoconductivity decay technique (1993) (38)
- Grain‐boundary characterization of ZnO varistors by positron annihilation spectroscopy (1989) (38)
- Defect passivation in multicrystalline‐Si materials by plasma‐enhanced chemical vapor deposition of SiO2/SiN coatings (1994) (36)
- Understanding and implementation of rapid thermal technologies for high-efficiency silicon solar cells (1999) (36)
- Boron Diffusion with Boric Acid for High Efficiency Silicon Solar Cells (2010) (35)
- High‐efficiency (19%) screen‐printed textured cells on low‐resistivity float‐zone silicon with high sheet‐resistance emitters (2006) (35)
- Review and comparison of equations relating bulk lifetime and surface recombination velocity to effective lifetime measured under flash lamp illumination (2003) (35)
- Fabrication and Modeling of High-Efficiency Front Junction N-Type Silicon Solar Cells With Tunnel Oxide Passivating Back Contact (2017) (33)
- High‐efficiency silicon solar cells by rapid thermal processing (1994) (33)
- Record low SiO2/Si interface state density for low temperature oxides prepared by direct plasma‐enhanced chemical vapor deposition (1993) (33)
- Fundamental understanding and implementation of Al-enhanced PECVD SiNx hydrogenation in silicon ribbons (2002) (33)
- Comparison of the damage and contamination produced by CF4 and CF4/H2 reactive ion etching: the role of hydrogen (1986) (33)
- A high voltage solar cell array as an electrostatic MEMS power supply (1994) (33)
- Interaction of low‐energy implanted atomic H with slow and fast diffusing metallic impurities in Si (1986) (33)
- Fully Ion-Implanted and Screen-Printed 20.2% Efficient Front Junction Silicon Cells on 239 cm $^{\bf 2}$ n-Type CZ Substrate (2014) (33)
- N-Type, Ion-Implanted Silicon Solar Cells and Modules (2011) (32)
- Enhanced silicon solar cell performance by rapid thermal firing of screen-printed metals (2001) (32)
- Rapid thermal processing of high-efficiency silicon solar cells with controlled in-situ annealing (1994) (32)
- Understanding and Use of IR Belt Furnace for Rapid Thermal Firing of Screen-Printed Contacts to Si Solar Cells (2010) (31)
- Some Effects of Crystal Growth Parameters on Minority Carrier Lifetime in Float‐Zoned Silicon (1989) (31)
- High efficiency inline diffused emitter (ILDE) solar cells on mono‐crystalline CZ silicon (2010) (31)
- 20% Efficient screen-printed n-type solar cells using a spin-on source and thermal oxide/silicon nitride passivation (2011) (31)
- Effective interfaces in silicon heterojunction solar cells (2005) (31)
- Investigation of Modified Screen-Printing Al Pastes for Local Back Surface Field Formation (2006) (31)
- Passivated Tunneling Contacts to N-Type Wafer Silicon and Their Implementation into High Performance Solar Cells: Preprint (2014) (31)
- Bulk lifetime and efficiency enhancement due to gettering and hydrogenation of defects during cast multicrystalline silicon solar cell fabrication (2008) (30)
- Fabrication and analysis of high-efficiency polycrystalline silicon solar cells (1993) (30)
- Hydrogen diffusion in silicon from plasma-enhanced chemical vapor deposited silicon nitride film at high temperature (2008) (30)
- Hydrogenation of defects in edge-defined film-fed grown aluminum-enhanced plasma enhanced chemical vapor deposited silicon nitride multicrystalline silicon (2000) (30)
- Development of a Phosphorus Spray Diffusion System for Low-Cost Silicon Solar Cells (2006) (30)
- On optimization of reliability of distributed generation-enhanced feeders (2003) (30)
- Green power: status and perspectives (2001) (30)
- Effective passivation of the low resistivity silicon surface by a rapid thermal oxide/plasma silicon nitride stack (1998) (29)
- Road to cost-effective crystalline silicon photovoltaics (2003) (29)
- High-efficiency selective boron emitter formed by wet chemical etch-back for n-type screen-printed Si solar cells (2017) (29)
- A study of polycrystalline Cd(Zn, Mn)Te/Cds films and interfaces (1990) (28)
- Al-enhanced PECVD SiNx induced hydrogen passivation in string ribbon silicon (2001) (28)
- Growth and characterization of CdMnTe and CdZnTe polycrystalline thin films for solar cells (1988) (27)
- Modeling the growth of PECVD silicon nitride films for solar cell applications using neural networks (1996) (27)
- Single‐crystal thin film InP: Fabrication and absorption measurements (1992) (27)
- Very low surface recombination velocities on 2.5 Ω cm Si wafers, obtained with low-temperature PECVD of Si-oxide and Si-nitride (1994) (26)
- Development of RIE-textured silicon solar cells (2000) (25)
- Evaluation of a Silicon 90Sr Betavoltaic Power Source (2016) (25)
- A Review and Understanding of Screen-Printed Contacts and Selective – Emitter Formation Preprint August 2004 (2004) (25)
- 730 mV implied Voc enabled by tunnel oxide passivated contact with PECVD grown and crystallized n+ polycrystalline Si (2015) (25)
- Bulk resistivity optimization for low‐bulk‐lifetime silicon solar cells (2001) (25)
- Base doping optimization for radiation-hard Si, GaAs, and InP solar cells (1992) (24)
- A new texturing geometry for producing high efficiency solar cells with no antireflection coatings (1993) (24)
- High-efficiency screen-printed silicon ribbon solar cells by effective defect passivation and rapid thermal processing (2003) (24)
- Modeling and characterization of high-efficiency silicon solar cells fabricated by rapid thermal processing, screen printing, and plasma-enhanced chemical vapor deposition (1997) (24)
- Implied-V(oc) and Suns-V(oc) Measurements in Multicrystalline Solar Cells (2002) (24)
- Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact (2017) (24)
- Production of extreme-purity aluminum and silicon by fractional crystallization processing (1988) (23)
- Screen printed, large area bifacial N-type back junction silicon solar cells with selective phosphorus front surface field and boron doped poly-Si/SiOx passivated rear emitter (2018) (23)
- The impact of cell design on light induced degradation in p-type silicon solar cells (2011) (23)
- Epitaxial growth of LaF3 on GaAs(111) (1986) (23)
- Resistivity and lifetime variation along commercially grown Ga‐ and B‐Doped Czochralski Si ingots and its effect on light‐induced degradation and performance of solar cells (2006) (23)
- A low‐temperature process for annealing extremely shallow As+‐implanted n+/p junctions in silicon (1984) (23)
- The Study of Silane-Free SiC x N y Film for Crystalline Silicon Solar Cells (2009) (23)
- Low resistance screen-printed Ag contacts to POCl3 emitters with low saturation current density for high efficiency Si solar cells (2012) (23)
- 26.7% Efficient 4-Terminal Perovskite–Silicon Tandem Solar Cell Composed of a High-Performance Semitransparent Perovskite Cell and a Doped Poly-Si/SiOx Passivating Contact Silicon Cell (2020) (23)
- Opportunities in silicon photovoltaics and defect control in photovoltaic materials (1993) (23)
- Self-Aligned Self-Doping Selective Emitter for Screen-Printed Silicon Solar Cells (2001) (22)
- Effect of post-PECVD photo-assisted anneal on multicrystalline silicon solar cells (1997) (22)
- 3D-modeling of a back point contact solar cell structure with a selective emitter (2009) (22)
- Silicon surface and bulk defect passivation by low temperature PECVD oxides and nitrides (1994) (22)
- Comparison of Front and Back Surface Passivation Schemes for Silicon Solar Cells (1998) (22)
- Screen-Printed Back Surface Reflector for Light Trapping in Crystalline Silicon Solar Cells (2001) (21)
- High efficiency large area n‐type front junction silicon solar cells with boron emitter formed by screen printing technology (2015) (21)
- Determining the Sufficiency of Standard Protective Relaying for Islanding Prevention in Grid-Connected PV Systems (1998) (21)
- Investigation of the properties of plasma-enhanced chemical vapor deposited silicon nitride and its effect on silicon surface passivation (1998) (21)
- Sputtered indium tin oxide as a recombination layer formed on the tunnel oxide/poly-Si passivating contact enabling the potential of efficient monolithic perovskite/Si tandem solar cells (2020) (21)
- 2D-Modeling and Development of Interdigitated Back Contact Solar Cells on Low-Cost Substrates (2006) (21)
- Approaching efficiencies above 25% with both sides-contacted silicon solar cells (2015) (21)
- Fully screen-printed bifacial large area 22.6% N-type Si solar cell with lightly doped ion-implanted boron emitter and tunnel oxide passivated rear contact (2020) (21)
- Sodium passivation in HCl oxide films on Si (1977) (21)
- Improved string ribbon silicon solar cell performance by rapid thermal firing of screen-printed contacts (2002) (21)
- Chlorine Incorporation in HCl Oxides (1979) (20)
- Determination of the curvature derating factor for the Georgia Tech Aquatic Center photovoltaic array (1997) (19)
- Characterization of the effects of metallic impurities on silicon solar cell performance (1978) (19)
- Effective Passivation of the Low Resistivity Silicon Surface by a Rapid Thermal Oxide/PECVD Silicon Nitride Stack and Its Application to Passivated Rear and Bifacial Si Solar Cells (1998) (19)
- Investigation of the Mechanism Resulting in low Resistance Ag Thick-Film Contact to Si Solar Cells in the Context of Emitter Doping Density and Contact Firing for Current-Generation Ag Paste (2014) (19)
- Ion-Implanted Screen-Printed n-Type Solar Cell With Tunnel Oxide Passivated Back Contact (2016) (19)
- Effect of material inhomogeneity on the open-circuit voltage of string ribbon Si solar cells (2005) (19)
- Design, fabrication, and analysis of greater than 18% efficient multicrystalline silicon solar cells (1997) (19)
- Design Considerations for Large Roof-integrated Photovoltaic Arrays (1997) (19)
- Modeling and characterization of interface state parameters and surface recombination velocity at plasma enhanced chemical vapor deposited SiO2–Si interface (1994) (19)
- Improved front side metallization for silicon solar cells by direct printing (2011) (19)
- An approach toward 20-percent-efficient silicon solar cells (1986) (18)
- Tunnel oxide passivated rear contact for large area n -type front junction silicon solar cells providing excellent carrier selectivity (2016) (18)
- The Effect of Low and High Temperature Anneals on the Hydrogen Content and Passivation of Si Surface Coated with SiO2 and SiN Films (1999) (18)
- Capitalizing on the Glass-Etching Effect of Silver Plating Chemistry to Contact Si Solar Cells With Homogeneous 100–110 $\Omega/\hbox{sq}$ Emitters (2011) (17)
- Efficient combination of surface and bulk passivation schemes of high‐efficiency multicrystalline silicon solar cells (1995) (17)
- Silver Contact Grid: Inferred Contact Resistivity and Cost Minimization in 19% Silicon Solar Cells (2013) (17)
- Ar ion beam and CCl4 reactive ion etching: A comparison of etching damage and of damage passivation by hydrogen (1985) (17)
- Fabrication and analysis of record high 18.2% efficient solar cells on multicrystalline silicon material (1996) (17)
- Minority-carrier lifetime enhancement in edge-defined film-fed grown Si through rapid thermal processing-assisted reduction of hydrogen-defect dissociation (2005) (17)
- Low temperature shallow junction formation using vacuum ultraviolet photons during rapid thermal processing (1997) (17)
- Effects of annealing and surface preparation on the properties of polycrystalline CdZnTe films grown by molecular beam epitaxy (1990) (17)
- A novel computer based pseudo‐logarithmic capacitance/conductance DLTS system specifically designed for transient analysis (1992) (17)
- 18% efficient silicon photovoltaic devices by rapid thermal diffusion and oxidation (1998) (16)
- How Rapid Isothermal Processing Can be a Dominant Semiconductor Processing Technology in the 21st Century (1996) (16)
- Understanding The Role Of Defects In Limiting The Minority Carrier Lifetime In Sic (1997) (16)
- Greater Than 16% Efficient Screen Printed Solar Cells on 115-170 μm Thick Cast Multicrystalline Silicon (2006) (16)
- Device optimization for screen printed interdigitated back contact solar cells (2011) (16)
- Optimization of self-doping Ag paste firing to achieve high fill factors on screen-printed silicon solar cells with a 100 /spl Omega//sq. emitter (2002) (16)
- Novel processing of solar cells with porous silicon texturing (2000) (16)
- A Comparison of Minority‐Carrier Lifetime in As‐Grown and Oxidized Float‐Zone, Magnetic Czochralski, and Czochralski Silicon (1990) (15)
- String ribbon silicon solar cells with 17.8% efficiency (2003) (15)
- Ion-implanted and screen-printed large area 19.6% efficient n-type bifacial Si solar cell (2012) (15)
- Integration of screen-printing and rapid thermal processing technologies for silicon solar cell fabrication (1996) (15)
- Comparison of POCl3 diffusion and phosphorus ion-implantation induced gettering in crystalline Si solar cells (2016) (15)
- Silicon damage caused by CCl4 reactive ion etching: Its characterization and removal by rapid thermal annealing (1985) (15)
- High-Efficiency n-Type Si Solar Cells With Novel Inkjet-Printed Boron Emitters (2012) (15)
- Effect of low‐energy hydrogen ion implantation on dendritic web silicon solar cells (1986) (15)
- Self-Doping Contacts and Associated Silicon Solar Cell Structures (1998) (15)
- Thin silicon String Ribbon for high efficiency polycrystalline solar cells (1997) (15)
- Fabrication and characterization of 18.6% efficient multicrystalline silicon solar cells (1998) (15)
- On the Ink Jetting of Full Front Ag Gridlines for Cost-Effective Metallization of Si Solar Cells (2012) (14)
- An approach toward 25-percent efficient GaAs heteroface solar cells (1989) (14)
- Understanding and Development of Ag Pastes for Silicon Solar Cells with High Sheet-Resistance Emitters (2004) (14)
- Estimation of PV System Reliability Parameters (2001) (14)
- Low leakage current GaAs diodes (1981) (14)
- High Purity and Semi-Insulating 4H-SiC Crystals Grown by Physical Vapor Transport (1997) (14)
- Guidelines for More Accurate Determination and Interpretation of Effective Lifetime from Measured Quasi-Steady-State Photoconductance (2001) (14)
- A Comparison of Bulk Lifetime, Efficiency, and Light-Induced Degradation in Boron- and Gallium-Doped Cast mc-Si Solar Cells (2006) (14)
- Ribbon Si solar cells with efficiencies over 18% by hydrogenation of defects (2006) (14)
- Hole-selective molybdenum oxide as a full-area rear contact to crystalline p-type Si solar cells (2017) (14)
- Fundamental understanding, impact, and removal of boron-rich layer on n-type silicon solar cells (2016) (14)
- High efficiency silicon solar cells with ink jetted seed and plated grid on high sheet resistance emitter (2010) (14)
- High efficiency solar cells on direct kerfless 156 mm mono crystalline Si wafers by high throughput epitaxial growth (2014) (14)
- Analytical approximation of effective surface recombination velocity of dielectric-passivated p-type silicon (2001) (14)
- Effect of Oxygen Concentration on Lifetime in Magnetic Czochralski Silicon (1991) (14)
- Abnormal Dopant Distribution in $\hbox{POCl}_{3}$ -Diffused $\hbox{N}^{+}$ Emitter of Textured Silicon Solar Cells (2011) (13)
- Defect passivation in multicrystalline silicon for solar cells (2004) (13)
- Developing novel low-cost, high-throughput processing techniques for 20%-efficient monocrystalline silicon solar cells (2010) (13)
- A microstructural study on the surface and interface of CdTe/CdS solar cells (1997) (13)
- P-Type Indium-Doped Passivated Emitter Rear Solar Cells (PERC) on Czochralski Silicon Without Light-Induced Degradation (2016) (13)
- Back surface field effects in the 17.3% efficient n-type dendritic web silicon solar cells (1998) (13)
- Fabrication and analysis of high-efficiency String Ribbon Si solar cells (2006) (13)
- Light induced degradation in promising multi-crystalline silicon materials for solar cell fabrication (2003) (13)
- Dissolution of Oxygen Precipitate Nuclei in n-Type CZ-Si Wafers to Improve Their Material Quality: Experimental Results (2017) (12)
- Sensitivity analysis of two-spectrum separation of surface and bulk components of minority carrier lifetimes (2002) (12)
- 20.7% efficient ion‐implanted large area n‐type front junction silicon solar cells with rear point contacts formed by laser opening and physical vapor deposition (2014) (12)
- Raman scattering characterization of high‐quality Cd1−xMnxTe films grown by metalorganic chemical vapor deposition (1988) (12)
- Infrared study of the concentration of H introduced into Si by the postdeposition annealing of a SiNx coating (2009) (12)
- Characterization and Control of Silicon Surface Modification Produced by CCl4 Reactive Ion Etching (1986) (12)
- Process‐Induced Effects on Carrier Lifetime and Defects in Float Zone Silicon (1980) (12)
- First Implementation of Ion Implantation to Produce Commercial Silicon Solar Cells (2011) (12)
- Conventionally-processed silicon nanowire solar cells demonstrating efficiency improvement over standard cells (2014) (12)
- The properties of polycrystalline silicon solar cells with controlled titanium additions (1981) (12)
- Doping and oxygen dependence of efficiency of EFG silicon solar cells (1990) (12)
- Back surface field and emitter passivation effects in the record high efficiency n-type dendritic web silicon solar cell (1997) (12)
- A new figure of merit and methodology for quantitatively determining defect resolution capabilities in deep level transient spectroscopy analysis (1994) (12)
- The effects of trap-induced lifetime variations on the design and performance of high-efficiency GaAs solar cells (1991) (12)
- High-efficiency screen-printed planar solar cells on single crystalline silicon materials (2005) (11)
- A Novel Processing Technology for High‐Efficiency Silicon Solar Cells (1999) (11)
- Investigation of the effects of aluminum treatment on silicon solar cells (1993) (11)
- An improved understanding of efficiency limiting defects in polycrystalline CdTe/CdS solar cells (1991) (11)
- Hydrogen diffusion in silicon from PECVD silicon nitride (2008) (11)
- Mobile Sodium Ion Passivation in HCl Oxides (1979) (11)
- Rapid thermal processing of next generation silicon solar cells (2000) (11)
- High efficiency screen-printed n-type silicon solar cell using co-diffusion of APCVD boron emitter and POCl 3 back surface field (2018) (11)
- Production viability of gallium doped mono-crystalline solar cells (2005) (11)
- Formation of high quality screen-printed contacts to homogeneous high sheet resistance emitters (HHSE) (2011) (11)
- Non-isothermal extension of the Scharfetter-Gummel technique for hot carrier transport in heterostructure simulations (1993) (11)
- Investigation of high-efficiency screen-printed textured Si solar cells with high sheet-resistance emitters (2005) (11)
- High Efficiency Mono-Crystalline Solar Cells with Simple Manufacturable Technology (2006) (11)
- 20% efficient screen printed LBSF cell fabricated using UV laser for rear dielectric removal (2010) (11)
- Study of degradation in bulk lifetime of n-type silicon wafer due to oxidation of boron-rich layer (2016) (11)
- Implementing narrow front silver gridlines through ink jet machine for high quality contacts to silicon solar cells (2011) (11)
- High-efficiency silicon solar cells: Development, current issues and future directions (1986) (11)
- High-efficiency silicon solar cells by low-cost rapid thermal processing, screen printing, and plasma-enhanced chemical vapor deposition (1996) (11)
- 20% Efficient Screen-Printed Cells With Spin-On-Dielectric-Passivated Boron Back-Surface Field (2010) (11)
- Transparent conducting oxide-based, passivated contacts for high efficiency crystalline Si solar cells (2015) (11)
- High-efficiency large area ion-implanted n-type front junction Si solar cells with screen-printed contacts and SiO2 passivated boron emitters (2014) (10)
- High-efficiency screen-printed belt co-fired solar cells on cast multicrystalline silicon (2005) (10)
- Interaction of hydrogen with carbon in multicrystalline Si solar-cell materials (2011) (10)
- Spatial profiles of photon chemical potential in near-field thermophotovoltaic cells (2021) (10)
- Light-induced degradation free and high efficiency p-type indium-doped PERC solar cells on Czochralski silicon (2015) (10)
- Process development and comparison of various boron emitter technologies for high‐efficiency (~21%) n‐type silicon solar cells (2016) (10)
- Investigation of metalorganic chemical vapor deposition grown CdTe/CdS solar cells (1991) (10)
- Structural, optical, and surface science studies of 4H-SiC epilayers grown by low pressure chemical vapor deposition (1996) (10)
- Comparison of covariance linear predictive modeling to the modulation function method for use in deep level transient spectroscopy (1994) (10)
- Modeling the Effects of Uncertainty and Reliability on the Cost of Energy from PV Systems (2005) (10)
- Rapid Thermal Technologies for High Efficiency Silicon Solar Cells (2002) (10)
- Carrier selective tunnel oxide passivated contact enabling 21.4% efficient large-area N-type silicon solar cells (2016) (10)
- Rapid Thermal Processing of Screen Printed Ohmic Contacts (1997) (9)
- Computer modeling of dendritic web growth processes and characterization of the material (1978) (9)
- Large area 19.4% efficient rear passivated silicon solar cells with local Al BSF and screen-printed contacts (2011) (9)
- Effects of CdCl2 treatment and annealing on CdS/SnO2/glass heterostructures for solar cells (2010) (9)
- 18% Large Area Screen-Printed Solar Cells on Textured MCZ Silicon with High Sheet Resistance Emitter (2006) (9)
- Concentration‐dependent near and above band edge absorption in doped InP and its effect on solar cell modeling (1995) (9)
- Understanding and Development of Screen-Printed Front Metallization for High-Efficiency Low-to-Medium Concentrator Silicon Solar Cells (2013) (8)
- Tailoring the Inline Diffused Emitter (ILDE) Profiles for High Efficiency Screen-Printed Silicon Solar Cells (2010) (8)
- Fabrication of 20 % efficient cells using spin-on based simultaneous diffusion and dielectric anneal (2009) (8)
- The optimization and fabrication of high efficiency HEM multicrystalline silicon solar cells (1996) (8)
- Design optimization for higher stabilized efficiency and reduced light‐induced degradation in boron‐doped Czochralski silicon solar cells (2002) (8)
- Hydrogen Passivation of Defects in Crystalline Silicon Solar Cells (2009) (8)
- Rapid thermal processing for front and rear contact passivation (2002) (8)
- Overcoming the Technological Challenges of Contacting Homogeneous High Sheet Resistance Emitters (HHSE) (2011) (8)
- Analysis of a commercial-scale photovoltaics system performance and economic feasibility (2017) (8)
- The effect of aluminum and boron solid-source doping on recombination in silicon solar cells (1991) (8)
- High-efficiency solar cells on low-resistivity dendritic web silicon ribbon (1985) (8)
- Rapid Thermal Processing of High Efficiency N-Type Silicon Solar Cells with Al Back Junction (2006) (8)
- Implentation of a homogeneous high-sheet-resistance emitter in multicrystalline silicon solar cells (2005) (8)
- High Efficiency Achieved on POCl3 Emitter Si Solar Cells with Low Saturation Current Density While Reducing Ag Consumption by 40-60% (2012) (8)
- Effect of trap location and trap-assisted Auger recombination on silicon solar cell performance (1995) (8)
- Optimization of saturation current density of PECVD SiN coated phosphorus diffused emitters using neural network modeling (1996) (7)
- Comparison of passivation properties of plasma-assisted ALD and APCVD deposited Al2O3 with SiNx capping (2020) (7)
- Optimizing the Inline Emitters for Higher Efficiency Silicon Solar Cells (2009) (7)
- Understanding and Fabrication of 20% Efficient Cells Using Spin-on-Based Simultaneous Diffusion and Dielectric Passivation (2012) (7)
- The effect of the variation in resistivity and lifetime on the solar cells performance along the commercially grown Ga- and B-doped Czochralski ingots (2005) (7)
- Understanding the mechanism of light induced plating of silver on screen-printed contacts for high sheet resistance emitters with low surface phosphorus concentration (2008) (7)
- Effect of Al content on the performance of Ag/Al screen printed N-type Si solar cells (2013) (7)
- Design, Optimization, and In-Depth Understanding of Front and Rear Junction Double-Side Passivated Contacts Solar Cells (2021) (7)
- A Novel Approach Toward the Simultaneous Diffusion of Boron and Phosphorus in Silicon (1997) (7)
- Optical and Electrical Characterization of Silver Microflake Colloid Films (2010) (7)
- Development and Understanding of High-Efficiency Screen-Printed Concentrator Silicon Solar Cells (2011) (7)
- High efficiency screen-printed 156cm2 solar cells on thin epitaxially grown silicon material (2013) (7)
- Rapid photo-assisted forming gas anneal (FGA) for high quality screen-printed contacts for silicon solar cells (2000) (7)
- Lifetime Enhancement in EFG Multicrystalline Silicon (2000) (7)
- Development of a simple analytical model to quantify the PV module cost premium associated with module efficiency and cell technology (2014) (7)
- Development and use of a simple numerical model to quantify the impact of key photovoltaics system parameters on the levelized cost of electricity (2012) (7)
- Reduction in Light Induced Degradation (LID) in B-doped Cz-Si Solar Cells with SiCxNy Antireflection (AR) Coating (2011) (7)
- An investigation of photocurrent loss due to reflectance and absorption in CdTe/CdS heterojunction solar cells (1994) (7)
- High efficiency n-type solar cells with screen-printed boron emitters and ion-implanted back surface field (2012) (7)
- Belt furnace gettering and passivation of n‐web silicon for high‐efficiency screen‐printed front‐surface‐field solar cells (2001) (7)
- Comparison of POCl3 diffusion with phosphorus ion implantation for Czochralski and Quasi-mono silicon solar cells (2014) (7)
- IR characterization of hydrogen in crystalline silicon solar cells (2009) (7)
- High efficiency screen printed low-medium concentrator silicon solar cells with direct printed 50µm wide fingers (2012) (7)
- Enhanced Front and Rear dielectric passivation for commercially grown Czochralski silicon for high efficiency solar cells (2009) (6)
- Beneficial Impact of Low Frequency PECVD SiN(x):H-Induced Hydrogenation in High-Efficiency String Ribbon Silicon Solar Cells (2004) (6)
- High Aspect Ratio Fine Gridline for Front Side Metallization of Industrial Silicon Solar Cells by Direct Printing (2011) (6)
- Rapid processing of low-cost, high-efficiency silicon solar cells (1999) (6)
- Hydrogen in silicon: current understanding of diffusion and passivation mechanisms (1994) (6)
- Enhanced diffusion and improved device performance using dual spectral source rapid thermal processing (1997) (6)
- Investigation of Contact Metallization Systems for Solar Cells (1980) (6)
- Investigation of the Effect of Resistivity and Thickness on the Performance of Cast Multicrystalline Silicon Solar Cells (2006) (6)
- 20% Efficient Screen-Printed n-Type Solar Cells Using a Spin-On Source and Thermal Oxide/Silicon Nitride Passivation (2011) (6)
- A novel technology for the simultaneous diffusion of boron, aluminum and phosphorus in silicon [solar cells] (1996) (6)
- High‐Efficiency Front Junction n‐Type Crystalline Silicon Solar Cells (2017) (6)
- Quantitative understanding of the benefit of selective emitters on screen printed Si solar cells as a function of improved paste contact properties (2013) (6)
- 19% efficient screen- printed cells using a passivated transparent boron back surface field (2008) (6)
- High Efficiency Screen-Printed Solar Cells on Textured Mono-Crystalline Silicon (2005) (6)
- Record-High-Efficiency Solar Cells on Multicrystalline Materials Through Understanding and Implementation of RTP-Enhanced SiNx-induced Defect Hydrogenation (2004) (6)
- A study of the effect of ultraviolet (UV) and vacuum ultraviolet (VUV) photons on the minority carrier lifetime of single crystal silicon processed by rapid thermal and rapid photothermal processing (1999) (6)
- A Novel and Effective Antireflection Coating PECVD Si02/SiN (1993) (6)
- High-efficiency screen-printed solar cell on edge-defined film-fed grown ribbon silicon through optimized rapid belt co-firing of contacts and high-sheet-resistance emitter (2004) (6)
- Damage-Layer-Mediated H Diffusion During SiN:H Processing: A Comprehensive Model (2006) (6)
- Analysis of cast mono-crystalline ingot characteristics with applications to solar cells (2012) (6)
- Process improvements for large area polycrystalline silicon buried contact solar cell sequence (1994) (6)
- Review Of High Efficiency Silicon Solar Cells (1986) (6)
- Monitoring and data acquisition for a large roof-mounted photovoltaic array (1997) (6)
- Optimization of front metal contact firing scheme to achieve high fill factors on screen printed silicon solar cells (2001) (5)
- Optimization of porous silicon reflectance for solar cell applications (1996) (5)
- Hydrogen in silicon: diffusion and defect passivation (1991) (5)
- Photoluminescence of Cd1−xMnxTe films grown by metalorganic chemical vapor deposition (1989) (5)
- A simultaneously diffused, textured, in situ oxide AR-coated solar cell process (STAR process) for high-efficiency silicon solar cells (1998) (5)
- Understanding of High-Throughput Rapid Thermal Firing of Screen-Printed Contacts to Large-Area Cast Multicrystalline Si Solar Cells (2010) (5)
- ~23% rear side poly-Si/SiO2 passivated silicon solar cell with optimized ion-implanted boron emitter and screen-printed contacts (2021) (5)
- Development of high‐efficiency large‐area screen‐printed solar cells on direct kerfless epitaxially grown monocrystalline Si wafer and structure (2016) (5)
- Positron annihilation spectroscopy of AlGaAs/GaAs interfaces in metalorganic chemical vapor deposition grown GaAs heterojunction solar cells (1988) (5)
- Several Efficiency Influencing Factors In CdTe/CdS Solar Cells (1997) (5)
- Analysis of the negative charges injected into a SiO2/SiNx stack using plasma charging technology for field‐effect passivation on a boron‐doped silicon surface (2020) (5)
- Silicon materials task of the low-cost solar-array project. Effect of impurities and processing on silicon solar cells. Final report (1982) (5)
- High efficiency screen‐printed EFG Si solar cells through rapid thermal processing‐induced bulk lifetime enhancement (2005) (5)
- Ion implanted screen printed N-type solar cell with tunnel oxide passivated back contact (2015) (5)
- Changing from rapid thermal processing to rapid photothermal processing: what does it buy for a particular technology? (1998) (5)
- Study of direct PECVD SiN/sub x/-induced surface emitter and bulk defect passivation in p-type silicon solar cells (2005) (5)
- Suppression of light-induced degradation of minority-carrier lifetimes in low-resistivity CZ-silicon wafers and solar cells (2000) (5)
- PECVD SiN(x) Induced Hydrogen Passivation in String Ribbon Silicon (2000) (5)
- Comparison of light-induced degradation and regeneration in P-type monocrystalline full aluminum back surface field and passivated emitter rear cells (2018) (5)
- Boron Selective Emitter Formation With Un-metallized J0e of 13fA/cm2 For Silicon Solar Cell Applications (2020) (4)
- Comprehensive Study of Ag Electroplating Baths in Conjunction With Light Induced Plating of Silver on Screen-Printed Contacts for High Efficiency Silicon Solar Cells (2008) (4)
- Effect of surface cleaning on pyramid size of randomly textured mono crystalline silicon and the impact on solar cell efficiency (2011) (4)
- Silver-carbon-nanotube composite metallization for increased durability of silicon solar cells against cell cracks (2021) (4)
- A low cost kerfless thin crystalline Si solar cell technology (2012) (4)
- A Comprehensive Study of the Performance of Silicon Screen-Printed Solar Cells Fabricated with Belt Furnace Emitters (2005) (4)
- High Implied Voc (>715 mV) and low emitter saturation current density (∼10fA/cm2) from a lightly B doped implanted emitter (2015) (4)
- 17.5% p-Type Silicon Heterojunction Solar Cells with HWCVD a-Si:H as the Emitter and Back Contact (2005) (4)
- Resistivity dependence of minority carrier lifetime and cell performance in p-type dendritic web silicon ribbon (2001) (4)
- HYDROGENATION OF Si FROM SiNx : H FILMS : HOW MUCH HYDROGEN IS REALLY IN THE Si ? (2003) (4)
- Defects and Carrier Lifetime in Silicon (1983) (4)
- Decade Performance of a Roof-Mounted Photovoltaic Array (2006) (4)
- Characterization and Optimization of the Contact Formation for High-Performance Silicon Solar Cells (2007) (4)
- Light Induced Degradation in Manufacturable Multi-crystalline Silicon Solar Cells (2001) (4)
- Importance and considerations of high efficiency solar cells (1984) (4)
- Positron annihilation spectroscopy: Applications to Si, ZnO, and multilayer semiconductor structures (1989) (4)
- Erratum: “High-efficiency screen-printed belt co-fired solar cells on cast multicrystalline silicon” [Appl. Phys. Lett.86, 054103 (2005)] (2005) (4)
- Field-effect passivation by charge injection into SiNx using a novel low-cost plasma charging method (2016) (4)
- Optimal surface and bulk passivation of high efficiency multicrystalline silicon solar cells (1994) (4)
- Development of Low-Cost, Crack-Tolerant Metallization Using Screen Printing (2019) (4)
- Large Area 21.6% Efficiency Front Junction N-type Cell with Screen Printed Tunnel Oxide Passivated Poly-Si Rear Contact (2019) (3)
- Theoretical design considerations for back surface field solar cells (1980) (3)
- High-efficiency cadmium and zinc-telluride-based thin-film solar cells (1989) (3)
- Screen printed, large area bifacial selective emitter N-PERT cells using single-step implantation through laser patterned dielectric layer (2016) (3)
- Surface-passivated high-efficiency silicon solar cells (1984) (3)
- High performance solar cells with silicon carbon nitride (SiCxNy) antireflection coatings deposited from polymeric solid source (2008) (3)
- IMPLEMENTATION OF A HOMOGENEOUS HIGH-SHEET-RESISTANCE EMITTER IN MULTICRYSTALLINE SILICON SOLAR CELLS (2005) (3)
- Proceedings of the 2nd Workshop on Metallization for Crystalline Silicon Solar Cells : Status, trends and new directions (2010) (3)
- Lifetime Enhancement During Processing of Porous Silicon Cells (2001) (3)
- NUMERICAL APPROACH TO UNCERTAINTY AND SENSITIVITY ANALYSIS IN FORECASTING THE MANUFACTURING COST AND PERFORMANCE OF PV MODULES (2004) (3)
- PECVD SiN/sub x/ induced hydrogen passivation in string ribbon silicon [solar cells] (2000) (3)
- Carrier selective tunnel oxide passivated contact enabling 21.4% efficient large-area N-type silicon solar cells (2017) (3)
- Effect of impurities and processing on silicon solar cells. Volume 1: Characterization methods for impurities in silicon and impurity effects data base (1980) (3)
- High efficiency n-type silicon solar cell with a novel inkjet-printed boron emitter (2011) (3)
- Time-resolved photoluminescence studies on transferred thin film InP epilayers (1993) (3)
- Effects of Impurities and Processing on Silicon Solar Cells, Phase 3 (1979) (3)
- A review of selected techniques for characterizing radiation-induced defects in solar cells (1991) (3)
- Effects of CdTe growth conditions and techniques on the efficiency limiting defects and mechanisms in CdTe solar cells (2008) (3)
- Design of selective emitter profiles for high efficiency solar cells under manufacturing technology constraints (2016) (3)
- Effect of carbon containing SiNx antireflection coating on the screen‐printed contact and low illumination performance of silicon solar cell (2013) (3)
- Understanding the Role of Forming Gas on the Screen-Printed Crystalline Silicon Solar Cell Front Grid (2006) (3)
- Impact of Deposition of ITO on Tunnel Oxide Passivating Poly-Si Contact (2019) (3)
- 20% efficient screen printed boron BSF cells using spin-on dielectric passivation (2009) (3)
- Impurities in polycrystalline silicon solar cells (1982) (3)
- Lifetime enhancement in EFG multicrystalline silicon [solar cells] (2000) (3)
- Characterization of MOCVD-grown CdMnTe films by infrared spectroscopy (1989) (3)
- High-resolution x-ray and light beam induced current (LBIC) measurements of multcrystalline silicon solar cells (2010) (3)
- Quantitative Understanding and Implementation of Screen-printed p+ Poly-Si/Oxide Passivated Contact to Enhance the Efficiency of p-PERC Cells (2020) (3)
- Silane-free PECVD silicon carbon nitride (SiCxNy) passivation and anti-reflection coatings for high efficiency silicon solar cells (2009) (3)
- Laser Crystallization and Dopant Activation of a-Si:H Carrier-Selective Layer in TOPCon Si Solar Cells (2020) (2)
- Radiation tolerance of boron doped dendritic web silicon solar cells (1980) (2)
- RECORD HIGH EFFICIENCY SCREEN-PRINTED BELT CO-FIRED CELLS ON CAST (2004) (2)
- Ink Jetted Seed and Plated Grid Solar Cells with Homogeneous High Sheet Resistance Emitters (2010) (2)
- Optimization of ultraviolet laser doping for crystalline silicon solar cells with a novel segmented selective emitter design (2013) (2)
- Spin-on based process for simultaneous diffusion and passivation for high efficiency LBSF solar cells (2008) (2)
- Lifetime Enhancement and Low-Cost Technology Development for High-Efficiency Manufacturable Silicon Solar Cells (2001) (2)
- Two-photon near-field characterization of hexaphenyl nanofibers (2005) (2)
- Field-effect passivation by negative charge on boron emitter and boron-doped surfaces by a novel low-cost plasma charge injection (2017) (2)
- Simultaneous iron gettering and passivation of p-type monocrystalline silicon using a negatively charged aluminum-doped dielectric (2012) (2)
- Two-dimensional dopant profiling in POCl3-diffused n+ emitter of textured silicon solar cells (2011) (2)
- MINORITY-CARRIER LIFETIME DEGRADATION IN SILICON CO-DOPED WITH IRON AND GALLIUM (1997) (2)
- Progress in Silicon Heterojunction Devices by Hot-Wire CVD: Preprint (2004) (2)
- High-Efficiency Large-Area Screen-Printed Solar Cell on Epitaxial Thin Active Layer With Porous Si Back Reflector Using Standard Industrial Process (2015) (2)
- Optimization of phosphoric acid based limited-source-diffusion to obtain high quality emitter for screen printed contacts (2011) (2)
- Successful Implementation of Narrow AG Gridlines with Ink Jet Machine for High Quality Contacts to Silicon Solar Cells (2011) (2)
- Scanning room temperature photoluminescence in SiNx:H layers (2004) (2)
- Silicon materials task of the low-cost solar array project. Phase 4: Effects of impurities and processing on silicon solar cells (1981) (2)
- Modeling and Understanding of Rear Junction Double-Side Passivated Contact Solar Cells with Selective Area TOPCon on Front (2021) (2)
- Investigation of spatially non-uniform defect passivation in EFG Si by scanning photoluminescence technique (2005) (2)
- Recent advances and approach toward low-cost high-efficiency multicrystalline silicon solar cells (2002) (2)
- 20% n-Type silicon solar cell fabricated by a simple process with an aluminum alloy rear junction and extended emitter (2016) (2)
- Hydrogenation of Si from SiN/sub x/:H films: how much hydrogen is really in the Si? (2003) (2)
- Corrigendum to “Ion-implanted and screen-printed large area 20% efficient N-type front junction Si solar cells” [Sol. Energy Mater. Sol. Cells 123 (2014) 92–96] (2014) (2)
- Comparison of dielectric surface passivation of monocrystalline and multicrystalline silicon (2002) (2)
- Slow positron annihilation spectroscopy of heterojunctions and homojunctions of GaAs-based semiconductor thin films (1988) (2)
- Development of Low-Cost High Efficiency Commercial Ready Advanced Silicon Solar Cells (2015) (2)
- High efficiency and radiation hard solar cells from dendritic web silicon ribbon (1981) (2)
- Phase 2 of the array automated assembly task for the low cost solar array project (1978) (1)
- Differences and similarities between metal clusters in mc-Si materials from different manufacturers. (2004) (1)
- Development of a Low Temperature Silver Paste for High Efficiency Screen-Printed Solar Cells (2006) (1)
- Optimization of In-situ and Ex-situ doped p+ Passivating Contact for High Efficiency p-TOPCon Solar Cell Application (2021) (1)
- Cost and Technology Roadmaps for Cost-Effective Silicon Photovoltaics (2003) (1)
- A Consortium for the Development of Silicon Carbide for Electronics Applications (2000) (1)
- Dopant diffused Si surface passivation by H2S gas reaction and quinhydrone-methanol treatment (2021) (1)
- PROCESS-INDUCED EFFECTS ON CARRIER LIFETIME AND DEFECTS IN FLOAT ZONE SILICON (1980) (1)
- Efficient passivation of n-type and p-type silicon surface defects by hydrogen sulfide gas reaction (2021) (1)
- Laser Crystallization and Dopant Activation for a-Si:H Film in Carrier-Selective Contacts for Silicon Solar cells (2019) (1)
- Light induced degradation in Czochralski silicon during illuminated high temperature processing (2002) (1)
- Effect of oxygen on lifetime and defects in magnetic Czochralski silicon (1987) (1)
- Novel Process for Screen-Printed Selective Area Front Polysilicon Contacts for TOPCon Cells Using Laser Oxidation (2022) (1)
- Photovoltaic on-demand high-voltage pulse generator as an on-board power source for electrostatic actuator array (1999) (1)
- Investigation on Light Stability of Injected Charge in α-SiNx: H by Plasma Charge Injection Technology (2021) (1)
- Rapid thermal processing and screen-printing for low cost silicon solar cells (1999) (1)
- Investigation of Atomic Layer Deposition Al2O3 Passivation for Screen-Printed Large-Area Solar Cells (2016) (1)
- Development of Low-Cost Plated Contact Solar Cells Using a Screen Printed Dielectric Etching Paste (2009) (1)
- A Novel Processing Technology for High‐Efficiency Silicon Solar Cells. (1999) (1)
- Solar Cells on EF Gand String Ribbon Silicon by rapid thermal processing (2003) (1)
- One-Step Screen-Printing Metallization Forming High Aspect Ratio Grid Lines on Crystalline Solar Cells (2010) (1)
- Optimization of Silane Free PECVD SiCxNy as Passivation and Antireflection Coating of Silicon Solar Cell (2009) (1)
- Emitter formation in dendritic web silicon solar cells (1984) (1)
- Semiconducting tin oxide thin films on glass (1973) (1)
- Gettering and passivation of high efficiency multicrystalline silicon solar cells (2008) (1)
- Dissolution of oxygen precipitate nuclei in N-type CZ Si wafers to improve their material quality: Experimental results (2017) (1)
- Screen Printed, Large Area Bifacial N-PERT cells with Tunnel Oxide Passivated Back Contact (2017) (1)
- Evaluation of new front silver paste from five star technologies (fst) for crystalline silicon solar cells (2010) (1)
- Design and performance of the Georgia Tech Aquatic Center photovoltaic system. Final report (1996) (1)
- Large-area n-type TOPCon Cells with Screen-printed Contact on Selective Boron Emitter Formed by Wet Chemical Etch-back (2017) (1)
- Fundamental Research and Development for Improved Crystalline Silicon Solar Cells: Final Subcontract Report, March 2002 - July 2006 (2007) (1)
- Evaluating the impact of current-generation screen-printed Ag paste on Si solar cell emitter saturation current density (2016) (1)
- SINX-INDUCED SURFACE EMITTER AND BULK DEFECT PASSIVATION IN P-TYPE SILICON SOLAR CELLS (2005) (1)
- Research Opportunities in Crystalline Silicon Photovoltaics for the 21st Century (1999) (1)
- Crystalline Si Solar Cells with Passivating, Carrier-selective Nickel Oxide Contacts (2017) (1)
- Sulfurization as a promising surface passivation approach for both n- and p-type Si (2020) (1)
- Improving Solar Cells With Polycrystalline Silicon (1987) (1)
- Invited) Improving Si Solar Cell Performance through Development of Lightly Doped Emitters (2014) (1)
- Solar cells and modules from dentritic web silicon (1980) (1)
- Research on the basic understanding of high efficiency in silicon solar cells. Semiannual report, December 1, 1983-June 1, 1984 (1984) (1)
- Rear Junction Bifacial Screen-Printed Double Side Passivated Contact Si Solar Cells (2022) (1)
- Distributed renewable generation: Interconnection and performance (2009) (1)
- Development of Front Silver Paste for Producing Fine Lines and High Quality Contacts to 100 Ω/sq Emitters With Low Surface Phosphorus Concentration (2008) (1)
- Crystalline silicon solar cells with segmented selective emitter by ultraviolet laser doping (2012) (1)
- Study of lifetime degradation in n-type silicon due to oxidation of boron-rich layer (2013) (1)
- Comments on "17.3% Efficiency Metal-oxide-semiconductor (MOS) Solar Cells With Liquid-phase-deposited Silicon Dioxide" (1998) (1)
- Development of high efficiency thin film CdTe solar cells (1994) (0)
- Silicon materials task of the low cost solar array project (Phase III). Effects of impurities and processing on silicon solar cells. Sixteenth quarterly report, July 1979-September 1979 (1979) (0)
- Evaluating the impact of current-generation screen-printed Ag paste on Si solar cell emitter saturation current density (2017) (0)
- Development of high-efficiency solar cells on silicon web. Second quarterly progress report, July-September 1984 (1984) (0)
- Characterization of HEM multi-crystalline silicon material for high efficiency solar cells (1995) (0)
- Investigation of efficiency limiting defects and rapid thermal processing of MOCVD grown CdTe solar cells (2008) (0)
- New concepts for high efficiency energy conversion: The avalanche heterostructure and superlattice solar cells (1993) (0)
- Rapid Thermal Annealing of p-Type Polysilicon Passivated Contacts Silicon Solar Cells (2023) (0)
- Producing a high quality rear contact with local back surface siebdruck (2008) (0)
- Hydrogenated Amorphous Silicon Emitter and Back-Surface-Field Contacts for Crystalline Silicon Solar Cells (2005) (0)
- New Concepts for High Efficiency Energy Conversion: The Avalanch Heterostructure and Superlattice Solar Cells, A Subcontract Report, 1 June 1987 - 31 January 1990 (1993) (0)
- High efficiency selective emitter enabled through patterned ion implantation (2011) (0)
- Development of high-efficiency solar cells on silicon web. Third quarterly progress report, October-December 1984 (1985) (0)
- Development of high-efficiency solar cells on silicon web: Final progress report for the period April 1, 1984 to September 30, 1986 (1986) (0)
- High-efficiency cadmium and zinc-telluride-based thin-film solar cells. Annual subcontract report, 1 March 1990--28 February 1991 (1992) (0)
- Investigation of long-term light stability of negative charge injected into oxide-nitride-oxide passivation stack of crystalline silicon solar cells (2022) (0)
- Development and understanding of high efficiency screen printed concentrator silicon solar cells (2011) (0)
- Design, Optimization, and In-Depth Understanding of Front and Rear Junction Screen-Printed Double-Side Passivated Contacts Solar Cells (2020) (0)
- Understanding of the RTP-assisted Reduction of Hydrogen Dissociation from Defects in EFG Si (2004) (0)
- Development of a co-anneal process for double-side TOPCon precursor fabricated by ex-situ POCI3 and APCVD boron diffusion (2022) (0)
- Large Area N-type Selective Emitter cells using Laser Doping through Boron Doped Screen Printed Paste (2017) (0)
- Silicon materials task of the low-cost solar array project (Phase IV): effects of impurities and processing on silicon solar cells. Eighteenth quarterly report, January 1980-March 1980 (1979) (0)
- Simple and Cost-Effective Reduction of Light Induced Degradation in B-Doped Cz-Si Solar Cells By Silexium PECVD SiCN Antireflective Passivation Coatings (2010) (0)
- Silicon Materials Task of the Low Cost Solar Array Project (Phase II). Ninth quarterly report, October 1--December 31, 1977 (1977) (0)
- Development of PECVD (SiCxNy) films with a novel silane free technology .... (2010) (0)
- IKIDBLIK TEE EFFECT OF TBdp LEVELS OA TEE OPTIMUM BESISTIVITY OF SILICON SOLAR CELLS (1988) (0)
- High-Efficiency Silicon Solar Cells Opportunity And Challenge (1985) (0)
- Fundamental Understanding and Development of Low-Cost, High-Efficient Silicon Solar Cells Final Progress Report: Sept. 1999 - June 2000 (2001) (0)
- Development of Rear Contact Technologies for Next Generation High-Efficiency Silicon Solar Cells (2012) (0)
- Quantitative Understanding and Implementation of Screen Printed p+ Poly-Si/Oxide Passivated Contact to Enhance the Efficiency of p-PERC Cells (2020) (0)
- 1993 annual final progress report: July 1992 through June 1993 (1994) (0)
- Coatings Boost Solar-Cell Outputs (1988) (0)
- Investigation of new screen-printed pastes from Hereaeus Inc. for high efficiency silicon solar cells (2006) (0)
- Dose-dependency of contact resistance and sheet resistance of B-implanted emitters for N-type crystalline Si solar cells fabricated using screen-printed fire-through Ag/Al paste metallization process (2023) (0)
- Positron annihilation spectroscopy of AlGaAs/GaAs interfaces in MOCVD-grown GaAs heterojunction solar cells (1987) (0)
- Enhanced Stability of Exposed PECVD Grown Thin n+ Poly-Si/SiOx Passivating Contacts With Al2O3 Capping Layer During High Temperature Firing (2021) (0)
- Status and directions in high efficiency silicon solar cell research (1987) (0)
- Raman And Photoluminescence Analysis Of Cd1-xMnxTe Thin Films (1989) (0)
- Laser-assisted solar cell metallization processing. Quarterly Report, December 1984-February 1985 (1985) (0)
- Defect Reduction and Improved Device Performance using Rapid Isothermal Diffusion in Silicon (1997) (0)
- Development of low-cost high efficiency silicon solar cells (1993) (0)
- Development of high-efficiency, thin-film CdTe solar cells. Final subcontract report, 1 February 1992--30 November 1995 (1996) (0)
- Phase 2 of the Array Automated Assembly Task for the Low Cost Solar Array Project. Quarterly report 5, October 1-December 31, 1978 (1979) (0)
- IT ATA ACQUISITION FOR A LARGE RQOP-MOUNTED PHOTOVOLTAIC ARRAY (1997) (0)
- Modelling and fabrication of high-efficiency silicon solar cells (1987) (0)
- Research on design and fabrication of high-efficiency solar cells (1990) (0)
- Silicon materials task of the low-cost solar-array project. Phase IV. Effects of impurities and processing on silicon solar cells. Twenty-second quarterly report, January 1981-March 1981 (1981) (0)
- Array Automated Assembly Task for the Low Cost Solar Array Project, Phase 2 (1979) (0)
- Bulk lifetime study of p-type Czochralski silicon with different processing history using quinhydrone-methanol surface passivation (2022) (0)
- High Throughput Rapid Thermal Firing of Screen-Printed Contacts to Si Solar Cells on Low Quality Materials (2010) (0)
- Rie Damage and Its Control in Silicon Processing (1987) (0)
- Approach towards high efficiency polycrystalline silicon solar cells (2008) (0)
- Impurity characterization support for silicon (1989) (0)
- Reactions of H with C in Multicrystalline Si Solar-cell Materials (2010) (0)
- Research on AlGaAs (1986) (0)
- Laser-assisted solar cell metallization processing: Final report for the period September 13, 1983 to September 30, 1986 (1986) (0)
- Development of High-Efficiency, Thin-Film CdTe Solar Cells: Annual Subcontract Report, 1 January 1993 - 31 December 1993 (1994) (0)
- Laser-assisted solar cell metallization processing. Quarterly report No. 7, July 1-September 30, 1985 (1985) (0)
- Effects of Cu on CdTe/CdS Heterojunction Solar Cells with Au/Cu Contacts. (1995) (0)
- University Crystalline Silicon Photovoltaics Research and Development (2008) (0)
- Chemical surface and interface structure of sulfur-passivated silicon with a SiNx capping layer (2022) (0)
- Investigation of single step Co-anneal of ion implanted boron and phosphorous to fabricate N-type front junction solar cells (2013) (0)
- Pushing the efficiency limit of low-cost, industrially relevant Si solar cells to > 22.5% by advancing cell structures and technology innovations (Final Report) (2021) (0)
- Gettering and passivation techniques for quality enhancement of multicrystalline silicon (1994) (0)
- Ti/Pd/Cu Contacts for Semiconductor Devices (1984) (0)
- Phase 2 of the array automated assembly task for the Low Cost Solar Array Project. Final report, October 1, 1978-October 30, 1979 (1979) (0)
- Application of PECVD for bulk and surface passivation of high efficiency silicon solar cells (1995) (0)
- Phase 2 of the array automated assembly task for the Low Cost Solar Array Project. Quarterly report no. 6, January 1-March 31, 1979 (1979) (0)
- Development of high-efficiency CdTe solar cells (1993) (0)
- Basic research on advanced silicon materials for high-performance photovoltaic devices: Volume 1, Single-crystal silicon (1992) (0)
- Translating Material-Level Characterization of Carbon-Nanotube-Reinforced Composite Gridlines To Module-Level Degradation (2022) (0)
- Title: Low-Cost, Advanced Metallization to Mitigate Cell-Crack-Induced Degradation (2019) (0)
- Comparison of dielectrics and iodine solution for monocrystalline and multicrystalline surface passivation (2003) (0)
- The decisive impact of cell efficiency on the implementation of photovoltaic systems (1984) (0)
- Minority-carrier lifetime degradation in silicon co-doped with iron and gallium [solar cells] (1997) (0)
- High efficiency silicon solar cells: Martin A. Green, ed.; published by Trans Tech Publications, Aedermannsdorf, 1987; 240 pp.; price Sfr. 96.— (1988) (0)
- Silicon materials task of the low cost solar array project, phase 2 (1976) (0)
- Novel Laser Oxidation for Screen-Printed Selective Area Front Poly-Silicon Contacts for TOPCon Cells (2022) (0)
- Laser-assisted solar cell metallization processing. Annual report, December 13, 1984-September 30, 1985 (1986) (0)
- Pushing the frontiers of silicon PV technologies: Novel approaches to high-efficiency, manufacturable silicon cells (2008) (0)
- Development of high-efficiency solar cells on silicon web. First quarterly progress report, April 20-July 15, 1984 (1984) (0)
- Silicon materials task of the low cost solar array project (Phase III). Effect of impurities and processing on silicon solar cells. Twelfth quarterly report (1978) (0)
- Toward Better Understanding and Improved Performance of Silicon Heterojunction Solar Cells: Preprint (2004) (0)
- SELF-ALGINED SELF-DOPING SELECTIVE EMITTER FOR SCREEN-PRINTED SILICON SOLAR CELLS (2001) (0)
- Comments On "17.3% Efficiency Metal-oxide-semiconductor (MOS) Solar Cells With Liquid-phase-deposite (1998) (0)
- Thin Film Si Bottom Cells for Tandem Device Structures: Final Technical Report, 15 December 2003 - 15 October 2007 (2008) (0)
- Detailed Characterization of Si Substrates and Solar Cells with High-Speed PVSCAN (2001) (0)
- Procedures for cleaning an opening surface solar cell formed with a solar etch paste. (2008) (0)
- Fundamental understanding and development of low-cost, high-efficiency silicon solar cells (2000) (0)
- Development of high-efficiency CdTe solar cells. Annual subcontract report, 1 February 1992--31 December 1992 (1993) (0)
- Impurity and Defect Characterization in Silicon: Final Technical Report, 1 October 1991 - March 1992 (1992) (0)
- Exploitation of Quantum Photoeffects in Reducing Microscopic Defects and Processing Cycle Time in Advanced Rapid Thermal Processing (1997) (0)
- Effects of illumination level on diffusion length and efficiency of poly-Si cells (1991) (0)
- Progress using Merck SolarEtch for crystalline silicon solar cells (2011) (0)
- A Study of Polycrystalline and Interfaces Cd ( Zn , Mn ) Te / CdS Films (0)
- Georgia Tech and air products pre-texture clean (1969) (0)
- University Center of Excellence for Photovoltaics Research and Education: Annual report (1995) (0)
- Reduction of light induced degradation (LID) in B-doped Cz-Si solar cells by SiH4-free SiCxNy film (2010) (0)
- EFFECTIVE PASSIVATION OF THE LOW RESISTIVIT SURFACE BY A RAPID THERMAL OXIDEPECVD SILICO STACK AND ITS APPLICATION TO PASSIVATED RE BIFACIAL SI SOLAR CELLS (2008) (0)
- Phase 2 of the Array Automated Assembly Task for the Low Cost Solar Array Project. Quarterly report No. 7, April 1-June 30, 1979 (1979) (0)
- Design of selective emitter profiles for high efficiency solar cells under manufacturing technology constraints (2017) (0)
- University Photovoltaic Research, Education, and Collaboration. Final Report (2007) (0)
- Design, development and analysis of large-area industrial silicon solar cells featuring a full area polysilicon based passivating contact on the rear and selective passivating contacts on the front (2023) (0)
- m NDIFFU ONLENGTHAND (1991) (0)
- High efficiency cadmium telluride and zinc telluride based thin-film solar cells (1992) (0)
- The Impact of Surface Cleaning on Random Texturing of Crystalline Silicon Wafers (2011) (0)
- Forming a back contact of high quality with a field in the local back surface screenprinted. (2008) (0)
- Silicon materials task of the low cost solar array project (Phase III). Effects of impurities and processing on silicon solar cells. Phase III summary and seventeenth quarterly report, Volume 2: analysis of impurity behavior (1980) (0)
- High efficiency crystalline solar cell analysis (1986) (0)
- Fabrication and analysis of high efficiency multicrystalline silicon solar cells (2008) (0)
- VIB-3 defect structure and electrical property modifications caused by reactive ion etching and ion beam etching (1983) (0)
- Lead-Free Front Silver Paste for High Quality Contacts to Silicon Solar Cells: Glass Frit and Firing Optimization (2009) (0)
- Rapid Thermal Annealing (RTA) of Hydrogenated Poly-Si under Air and Nitrogen and Blister Formation (2022) (0)
- A method for cleaning a solar cell surface with an opening solarätzungspaste (2008) (0)
- Silicon Materials Task of the Low Cost Solar Array Project (Phase II). Eighth quarterly report, July 1, 1977--September 30, 1977 (1977) (0)
- Field-effect passivation by charge injection into SiNx using a novel low-cost plasma charging method (2017) (0)
- TRENDS IN PHOTOVOLTAICS AND THEIR APPLICATION TO ME MS (2012) (0)
- Optimization of Carbon-Nanotube-Reinforced Composite Gridlines Towards Commercialization (2021) (0)
- Investigation of the effect of compensation ratio (RC) on solar cells fabricated with solar grade (SoG) czochralski silicon (2010) (0)
- Silicon Materials Task of the Low Cost Solar Array Project (Phase II). Effect of impurities and processing on silicon solar cells. Phase II. Summary and eleventh quarterly report (1978) (0)
- 20% n-Type silicon solar cell fabricated by a simple process with an aluminum alloy rear junction and extended emitter (2017) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Ajeet Rohatgi?
Ajeet Rohatgi is affiliated with the following schools: