Avinash Kumar Agarwal
#55,560
Most Influential Person Now
Indian mechanical engineer, tribologist, and professor
Avinash Kumar Agarwal's AcademicInfluence.com Rankings
Avinash Kumar Agarwalengineering Degrees
Engineering
#1309
World Rank
#1957
Historical Rank
Materials Science
#49
World Rank
#50
Historical Rank
Mechanical Engineering
#65
World Rank
#83
Historical Rank
Applied Physics
#189
World Rank
#198
Historical Rank
Download Badge
Engineering
Why Is Avinash Kumar Agarwal Influential?
(Suggest an Edit or Addition)According to Wikipedia, Avinash Kumar Agarwal is an Indian mechanical engineer, tribologist and a professor at the Department of Mechanical Engineering of the Indian Institute of Technology, Kanpur. He is known for his studies on internal combustion engines, Emissions, alternate fuels and CNG engines and is an elected fellow of the American Society of Mechanical Engineering , Society of Automotive Engineers, US , National Academy of Science, Allahabad , Royal Society of Chemistry, UK , International Society for Energy, Environment and Sustainability , and Indian National Academy of Engineering . The Council of Scientific and Industrial Research, the apex agency of the Government of India for scientific research, awarded him the Shanti Swarup Bhatnagar Prize for Science and Technology, one of the highest Indian science awards for his contributions to Engineering Sciences in 2016. Agarwal has been bestowed upon Prestigious J C Bose Fellowship of Science and Engineering Research Board. Government of India . Agarwal is among the top ten highly cited researchers of 2018 from India, as per Clarivate Analytics, an arm of Web of Science.
Avinash Kumar Agarwal's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines (2007) (3035)
- The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review (2008) (856)
- Performance and emissions characteristics of Jatropha oil (preheated and blends) in a direct injection compression ignition engine (2007) (674)
- Biodiesel Development and Characterization for Use as a Fuel in Compression Ignition Engines (2001) (645)
- Experimental investigations of performance and emissions of Karanja oil and its blends in a single cylinder agricultural diesel engine (2009) (495)
- Performance evaluation of a vegetable oil fuelled compression ignition engine (2008) (386)
- Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine (2013) (381)
- The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions (2005) (360)
- Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine (2011) (355)
- Biodiesel development from rice bran oil: Transesterification process optimization and fuel characterization (2008) (348)
- Experimental investigation of control of NOx emissions in biodiesel-fueled compression ignition engine (2006) (341)
- IJER editorial: The future of the internal combustion engine (2020) (323)
- Alternative fuels for internal combustion engines (2017) (310)
- Evolution, challenges and path forward for low temperature combustion engines (2017) (300)
- Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics (2015) (284)
- Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine (2011) (254)
- Development of high strength hydroxyapatite by solid-state-sintering process (2007) (248)
- Production of biodiesel from high-FFA neem oil and its performance, emission and combustion characterization in a single cylinder DICI engine (2012) (240)
- Performance, emissions and combustion characteristics of Karanja biodiesel in a transportation engine (2014) (227)
- Free Radical‐Generated Neurotoxicity of 6‐Hydroxydopamine (1995) (209)
- Effect of injection parameters on the combustion and emission characteristics in a common-rail direct injection diesel engine fueled with waste cooking oil biodiesel (2014) (203)
- Experimental investigations of performance, emission and combustion characteristics of Karanja oil blends fuelled DICI engine. (2013) (188)
- Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters (2011) (180)
- Combustion characteristics of diesel HCCI engine: An experimental investigation using external mixture formation technique (2012) (162)
- Measurements of atmospheric parameters during Indian Space Research Organization Geosphere Biosphere Programme Land Campaign II at a typical location in the Ganga basin: 1. Physical and optical properties (2006) (157)
- Effect of Biodiesel Utilization of Wear of Vital Parts in Compression Ignition Engine (2003) (154)
- Effect of fuel injection pressure and injection timing on spray characteristics and particulate size–number distribution in a biodiesel fuelled common rail direct injection diesel engine (2014) (154)
- Particulate emissions from biodiesel vs diesel fuelled compression ignition engine (2011) (143)
- Combustion, performance, emissions and particulate characterization of a methanol–gasoline blend (gasohol) fuelled medium duty spark ignition transportation engine (2014) (141)
- Wear assessment in a biodiesel fueled compression ignition engine (2003) (130)
- Effect of split fuel injection and EGR on NOx and PM emission reduction in a low temperature combustion (LTC) mode diesel engine (2017) (120)
- Experimental investigations of performance, combustion and emission characteristics of ethanol and methanol fueled HCCI engine (2014) (118)
- The effects of tumble and swirl flows on flame propagation in a four-valve S.I. engine (2007) (118)
- Potential and challenges for large-scale application of biodiesel in automotive sector. (2017) (117)
- Characterization of exhaust particulates from diesel engine (2005) (116)
- Effect of fuel injection parameters on combustion stability and emissions of a mineral diesel fueled partially premixed charge compression ignition (PCCI) engine (2017) (113)
- Detailed Characterization of Morphology and Dimensions of Diesel Particulates via Thermophoretic Sampling (2001) (112)
- Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine (2013) (111)
- The effect of swirl ratio and fuel injection parameters on CO emission and fuel conversion efficiency for high-dilution, low-temperature combustion in an automotive diesel engine. (2006) (111)
- Effects of the injection timing on spray and combustion characteristics in a spray-guided DISI engine under lean-stratified operation (2013) (109)
- Measurements of atmospheric parameters during Indian Space Research Organization Geosphere Biosphere Program Land Campaign II at a typical location in the Ganga Basin: 2. Chemical properties: AEROSOL CHEMISTRY IN IG BASIN (2006) (105)
- Application and analysis of support vector machine based simulation for runoff and sediment yield (2009) (104)
- Particulate emission characterization of a biodiesel vs diesel-fuelled compression ignition transport engine: A comparative study (2006) (103)
- Homogeneous charge compression ignition of LPG and gasoline using variable valve timing in an engine (2007) (103)
- Effects of Multiple Injections in a HSDI Diesel Engine Equipped with Common Rail Injection System (2004) (101)
- Combustion Control using Two-Stage Diesel Fuel Injection in a Single-Cylinder PCCI Engine (2004) (100)
- Particulate emissions from biodiesel fuelled CI engines (2015) (100)
- Effect of fuel injection pressure on diesel particulate size and number distribution in a CRDI single cylinder research engine (2013) (99)
- Experimental investigations of combustion, performance and emission characterization of biodiesel fuelled HCCI engine using external mixture formation technique (2014) (97)
- Simulation of Runoff and Sediment Yield using Artificial Neural Networks (2006) (93)
- Spray characteristics of biodiesel/blends in a high pressure constant volume spray chamber (2012) (92)
- Experimental investigations of the effect of biodiesel utilization on lubricating oil tribology in diesel engines (2005) (92)
- ANN-based sediment yield models for Vamsadhara river basin (India) (2005) (90)
- Comparative compression ignition engine performance, combustion, and emission characteristics, and trace metals in particulates from Waste cooking oil, Jatropha and Karanja oil derived biodiesels (2019) (89)
- Comparative compression ignition engine performance, combustion, and emission characteristics, and trace metals in particulates from Waste cooking oil, Jatropha and Karanja oil derived biodiesels (2019) (89)
- Experimental investigations of combustion, performance and emission characteristics of a hydrogen enriched natural gas fuelled prototype spark ignition engine (2016) (85)
- Long-term storage oxidation stability of Karanja biodiesel with the use of antioxidants (2013) (85)
- Chronology of Total Hip Joint Replacement and Materials Development (2005) (82)
- Composition and comparative toxicity of particulate matter emitted from a diesel and biodiesel fuelled CRDI engine (2012) (82)
- Comparisons of advanced combustion technologies (HCCI, PCCI, and dual-fuel PCCI) on engine performance and emission characteristics in a heavy-duty diesel engine (2020) (79)
- Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine (2014) (78)
- Technical feasibility study of butanol–gasoline blends for powering medium-duty transportation spark ignition engine (2015) (78)
- Application of JP-8 in a heavy duty diesel engine (2011) (78)
- Experimental investigations of the effect of pilot injection on performance, emissions and combustion characteristics of Karanja biodiesel fuelled CRDI engine. (2015) (76)
- Performance Evaluation of a Biodiesel (Rice Bran Oil Methyl Ester) Fuelled Transport Diesel Engine (2005) (73)
- Application of waste cooking oil (WCO) biodiesel in a compression ignition engine (2016) (73)
- Simulation on the effect of the combustion parameters on the piston dynamics and engine performance using the Wiebe function in a free piston engine (2013) (72)
- Experimental Investigation of the Effect of Biodiesel Utilization on Lubricating Oil Degradation and Wear of a Transportation CIDI Engine (2007) (71)
- Handbook of combustion (2010) (71)
- Experimental investigations of heavy metal addition in lubricating oil and soot deposition in an EGR operated engine (2006) (69)
- In-nozzle flow and spray characteristics for mineral diesel, Karanja, and Jatropha biodiesels (2015) (68)
- Microwave-assisted plasma ignition in a constant volume combustion chamber (2016) (66)
- Measurement of number and size distribution of particles emitted from a mid-sized transportation multipoint port fuel injection gasoline engine (2010) (66)
- Effect of liner surface properties on wear and friction in a non-firing engine simulator (2007) (65)
- Characterization of exhaust particulates from diesel fueled homogenous charge compression ignition combustion engine (2013) (65)
- Combustion and emission characteristics of a direct injection compression ignition engine using rapeseed oil based micro-emulsions (2013) (64)
- Comparative particulate characteristics of hydrogen, CNG, HCNG, gasoline and diesel fueled engines (2016) (64)
- Evaluation of comparative engine combustion, performance and emission characteristics of low temperature combustion (PCCI and RCCI) modes (2020) (63)
- Effect of straight vegetable oil blends and biodiesel blends on wear of mechanical fuel injection equipment of a constant speed diesel engine (2016) (63)
- Effects of water direct injection on the torque enhancement and fuel consumption reduction of a gasoline engine under high-load conditions (2016) (63)
- Effect of Nozzle Geometry on the Common-Rail Diesel Spray (2002) (63)
- Statistical analysis of the cyclic variations of heat release parameters in HCCI combustion of methanol and gasoline (2012) (62)
- Effect of pyrethroid‐based liquid mosquito repellent inhalation on the blood–brain barrier function and oxidative damage in selected organs of developing rats (1999) (62)
- Experimental investigation of the combustion characteristics of a biodiesel (rice-bran oil methyl ester)-fuelled direct-injection transportation diesel engine (2007) (62)
- Unregulated emissions and health risk potential from biodiesel (KB5, KB20) and methanol blend (M5) fuelled transportation diesel engines (2016) (62)
- Experimental study of the composition of hydrogen enriched compressed natural gas on engine performance, combustion and emission characteristics (2015) (60)
- Improvement of combustion and emissions with exhaust gas recirculation in a natural gas-diesel dual-fuel premixed charge compression ignition engine at low load operations (2019) (58)
- Runoff Modelling Through Back Propagation Artificial Neural Network With Variable Rainfall-Runoff Data (2004) (57)
- Effects of diesel fuel temperature on fuel flow and spray characteristics (2015) (57)
- Gastric carcinogenesis: Possible role of polymorphisms of GSTM1, GSTT1, and GSTP1 genes (2008) (56)
- Combustion, noise, vibrations and spray characterization for Karanja biodiesel fuelled engine (2016) (55)
- Intake air strategy for low HC and CO emissions in dual-fuel (CNG-diesel) premixed charge compression ignition engine (2018) (55)
- Experimental investigations of comparative performance, emission and combustion characteristics of a cottonseed biodiesel-fueled four-stroke locomotive diesel engine (2013) (55)
- Effect of air–fuel mixing quality on characteristics of conventional and low temperature diesel combustion (2014) (54)
- Frictional modes of barrel shaped piston rings under flooded lubrication (2000) (54)
- Effect of Engine Load on Size and Number Distribution of Particulate Matter Emitted from a Direct Injection Compression Ignition Engine (2011) (54)
- Experimental investigation of cyclic variations in HCCI combustion parameters for gasoline like fuels using statistical methods (2013) (53)
- Digital signal processing of cylinder pressure data for combustion diagnostics of HCCI engine (2013) (53)
- Effect of EGR on Combustion Development in a 1.9L DI Diesel Optical Engine (1995) (53)
- Effect of Karanja biodiesel blend on engine wear in a diesel engine (2014) (53)
- Tribological studies of epoxy composites with solid and liquid fillers (2017) (53)
- Development of surface functionalized activated carbon fiber for control of NO and particulate matter. (2010) (52)
- Combustion Characteristics of Rice Bran Oil Derived Biodiesel in a Transportation Diesel Engine (2005) (51)
- Experimental investigations of effect of Karanja biodiesel on tribological properties of lubricating oil in a compression ignition engine (2014) (50)
- Spray characteristics, engine performance and emissions analysis for Karanja biodiesel and its blends (2017) (50)
- Combustion process of JP-8 and fossil Diesel fuel in a heavy duty diesel engine using two-color thermometry (2012) (50)
- Spray characterization, combustion, noise and vibrations investigations of Jatropha biodiesel fuelled genset engine (2016) (49)
- Comparative experimental evaluation of performance, combustion and emissions of laser ignition with conventional spark plug in a compressed natural gas fuelled single cylinder engine (2014) (49)
- Spray and combustion characteristics of ethanol blended gasoline in a spray guided disi engine under lean stratified operation (2010) (49)
- Application of double-injection strategy on gasoline compression ignition engine under low load condition (2017) (49)
- Development of High Strength Hydroxyapatite for Hard Tissue Replacement (2005) (48)
- Flame kernel characterization of laser ignition of natural gas–air mixture in a constant volume combustion chamber (2011) (47)
- Flow and Combustion in a Four-Valve, Spark-Ignition Optical Engine (1994) (47)
- Effect of Multiple Injection Strategies on Emission and Combustion Characteristics in a Single Cylinder Direct-Injection Optical Engine (2009) (45)
- Assessment of particulate matter in exhaust gas for biodiesel and diesel under conventional and low temperature combustion in a compression ignition engine (2016) (45)
- Improving oxidation stability of biodiesels derived from Karanja, Neem and Jatropha: step forward in the direction of commercialisation (2015) (44)
- Combustion and Emission Characterization of n-Butanol Fueled HCCI Engine (2015) (43)
- Influence of Early Fuel Injection Timings on Premixing and Combustion in a Diesel Engine (2008) (43)
- Unregulated emissions from a gasohol (E5, E15, M5, and M15) fuelled spark ignition engine (2015) (43)
- Immaturity of soot particles in exhaust gas for low temperature diesel combustion in a direct injection compression ignition engine (2015) (42)
- Experimental Investigations of Particulate Size and Number Distribution in an Ethanol and Methanol Fueled HCCI Engine (2015) (42)
- Effect of exhaust gas recirculation (EGR) and multiple injections on diesel soot nano-structure and reactivity (2017) (42)
- Bioremediation: Applications for Environmental Protection and Management (2017) (41)
- Comparative Performance, Emission, and Combustion Characteristics of Rice-Bran Oil and Its Biodiesel in a Transportation Diesel Engine (2010) (41)
- Particulate emissions from hydrogen enriched compressed natural gas engine (2016) (41)
- Effect of injection strategy on smoothness, emissions and soot characteristics of PCCI-conventional diesel mode transition (2016) (41)
- Characterisation of laser ignition in hydrogen–air mixtures in a combustion bomb (2009) (40)
- Improvement of DME HCCI engine combustion by direct injection and EGR (2013) (40)
- Dimethyl Ether (DME) Spray Characteristics Compared to Diesel in a Common-Rail Fuel Injection System (2002) (40)
- Air flow and pressure inside a pressure-swirl spray and their effects on spray development (2009) (39)
- Review of Experimental and Computational Studies on Spray, Combustion, Performance, and Emission Characteristics of Biodiesel Fueled Engines (2018) (39)
- Experimental investigation of the effect of the intake air temperature and mixture quality on the combustion of a methanol- and gasoline-fuelled homogeneous charge compression ignition engine (2009) (39)
- Performance, Emission and Combustion Characteristics of Jatropha Oil Blends in a Direct Injection CI Engine (2009) (39)
- Trace metals and ions in particulates emitted by biodiesel fuelled engine (2017) (38)
- Diesoline, Diesohol, and Diesosene Fuelled HCCI Engine Development (2016) (38)
- Effect of the Multiple Injection on Stratified Combustion Characteristics in a Spray-Guided DISI Engine (2011) (38)
- The influence of airflow on fuel spray characteristics from a slit injector (2007) (37)
- Performance, Emission and Combustion Characteristics of Biodiesel (Waste Cooking Oil Methyl Ester) Fueled IDI Diesel Engine (2008) (37)
- Preparation, characterization, engine combustion and emission characteristics of rapeseed oil based hybrid fuels (2013) (37)
- Experimental investigations of Soyabean and Rapeseed SVO and biodiesels on engine noise, vibrations, and engine characteristics (2019) (36)
- Real-world automotive emissions: Monitoring methodologies, and control measures (2021) (36)
- Application of a novel microwave-assisted plasma ignition system in a direct injection gasoline engine (2017) (36)
- The effects of hydrogen addition on engine power and emission in DME premixed charge compression ignition engine (2013) (36)
- Catalytic hydrogenolysis of esters: a comparative study of the reactions of simple formates and acetates over copper on silica (1987) (36)
- Novel Combustion Concepts for Sustainable Energy Development (2014) (35)
- Knocking behavior and emission characteristics of a port fuel injected hydrogen enriched compressed natural gas fueled spark ignition engine (2018) (35)
- Fuel temperature influence on spray and combustion characteristics in a constant volume combustion chamber (CVCC) under simulated engine operating conditions (2015) (35)
- Effectiveness of non-noble metal based diesel oxidation catalysts on particle number emissions from diesel and biodiesel exhaust. (2017) (35)
- Measurement of dynamic lubricating oil film thickness between piston ring and liner in a motored engine (2009) (34)
- Investigations on air-fuel mixing and flame characteristics of biodiesel fuels for diesel engine application (2017) (33)
- Investigations on air-fuel mixing and flame characteristics of biodiesel fuels for diesel engine application (2017) (33)
- Nanostructure characterization of soot particles from biodiesel and diesel spray flame in a constant volume combustion chamber (2019) (33)
- Nanostructure characterization of soot particles from biodiesel and diesel spray flame in a constant volume combustion chamber (2019) (33)
- Gaseous emissions (regulated and unregulated) and particulate characteristics of a medium-duty CRDI transportation diesel engine fueled with diesel-alcohol blends (2020) (32)
- The structure of a break-up zone in the transient diesel spray of a valve-covered orifice nozzle (2006) (32)
- Effect of varying compression ratio on combustion, performance, and emissions of a hydrogen enriched compressed natural gas fuelled engine (2016) (32)
- Experimental Investigation of Cycle-by-Cycle Variations in CAI/HCCI Combustion of Gasoline and Methanol Fuelled Engine (2009) (31)
- Assessment of spinach seedling health status and chlorophyll content by multivariate data analysis and multiple linear regression of leaf image features (2018) (31)
- Profile of reactive oxygen species generation and antioxidative mechanisms in the maturing rat kidney (1999) (31)
- Effect of the air-conditioning system on the fuel economy in a gasoline engine vehicle (2013) (31)
- The effect of oxygen enrichment on incipient soot particles in inverse diffusion flames (2012) (31)
- Effect of Karanja biodiesel blends on particulate emissions from a transportation engine (2015) (31)
- Experimental investigations of noise and vibration characteristics of gasoline-methanol blend fuelled gasoline direct injection engine and their relationship with combustion characteristics (2019) (31)
- Adaptation of Methanol–Dodecanol–Diesel Blend in Diesel Genset Engine (2019) (31)
- Two-stage Fuel Direct Injection in a Diesel Fuelled HCCI Engine (2007) (31)
- Effects of Engine Operating Conditions on Catalytic Converter Temperature in an SI Engine (2002) (31)
- Rainfall Dependence of Springs in the Midwestern Himalayan Hills of Uttarakhand (2012) (30)
- Evaluation of Fuel Injection Strategies for Biodiesel Fueled CRDI Engine Development and Particulate Studies (2018) (30)
- Advances in Internal Combustion Engine Research (2017) (30)
- Load expansion of naphtha multiple premixed compression ignition (MPCI) and comparison with partially premixed compression ignition (PPCI) and conventional diesel combustion (CDC) (2014) (29)
- Spray droplet size distribution and droplet velocity measurements in a firing optical engine (2020) (29)
- Methanol as an Alternative Fuel for Diesel Engines (2018) (29)
- Mutagenicity and Cytotoxicity of Particulate Matter Emitted from Biodiesel-Fueled Engines. (2018) (29)
- Expansion of low-load operating range by mixture stratification in a natural gas-diesel dual-fuel premixed charge compression ignition engine (2019) (29)
- Combustion characteristics of a variable compression ratio laser-plasma ignited compressed natural gas engine (2018) (29)
- Application of a Wide Range Oxygen Sensor for the Misfire Detection (1999) (29)
- Photosynthetic apparatus plays a central role in photosensitive physiological acclimations affecting spinach (Spinacia oleracea L.) growth in response to blue and red photon flux ratios (2018) (29)
- Wear, durability, and lubricating oil performance of a straight vegetable oil (Karanja) blend fueled direct injection compression ignition engine (2012) (29)
- Combustion characteristics of a common rail direct injection engine using different fuel injection strategies (2018) (29)
- The Effects of Injector Temperature on Spray and Combustion Characteristics in a Single Cylinder DISI Engine (2005) (28)
- Comprehensive Assessment of Soot Particles from Waste Cooking Oil Biodiesel and Diesel in a Compression Ignition Engine (2015) (28)
- Review of dual-fuel combustion in the compression-ignition engine: Spray, combustion, and emission (2022) (28)
- Forecasting of Runoff and Sediment Yield Using Artificial Neural Networks (2009) (28)
- Effects of valve events on the engine efficiency in a homogeneous charge compression ignition engine fueled by dimethyl ether (2009) (28)
- Effect of the Fuel Injection Pressure on Particulate Emissions from a Gasohol (E15 and M15)-Fueled Gasoline Direct Injection Engine (2017) (28)
- Design of a Heat Exchanger to Reduce the Exhaust Temperature in a Spark-Ignition Engine (2008) (28)
- Evaluation of toxic potential of particulates emitted from Jatropha biodiesel fuelled engine (2016) (28)
- Particulate Characterization and Size Distribution in the Exhaust of a Gasoline Homogeneous Charge Compression Ignition Engine (2015) (27)
- Effect of Biofuels on Nanoparticle Emissions from Spark- and Compression-ignited Single-cylinder Engines with Same Exhaust Displacement Volume (2009) (27)
- Time resolved numerical modeling of oil jet cooling of a medium duty diesel engine piston (2011) (27)
- Spray and combustion of waste cooking oil biodiesel in a compression-ignition engine (2015) (27)
- Effect of piezo-driven and solenoid-driven needle opening of common-rail diesel injectors on internal nozzle flow and spray development (2006) (27)
- An Experimental Investigation of Combustion, Emissions and Performance of a Diesel Fuelled HCCI Engine (2012) (27)
- Effect of non-edible oil and its biodiesel on wear of fuel injection equipment components of a genset engine (2018) (27)
- Particulate emissions from laser ignited and spark ignited hydrogen fueled engines (2017) (26)
- Correlation between Spark Ignition Characteristics and Flame Development in a Constant-Volume Combustion Chamber (1992) (26)
- Visualization of Flow/Flame Interaction in a Constant-Volume Combustion Chamber (1993) (26)
- Emission profiling of diesel and gasoline cars at a city traffic junction (2015) (26)
- Diesel Spray Development of VCO Nozzles for High Pressure Direct-Injection (2000) (26)
- Comparative study of laser ignition and conventional electrical spark ignition systems in a hydrogen fuelled engine (2015) (26)
- In-cylinder combustion visualization of Jatropha straight vegetable oil and mineral diesel using high temperature industrial endoscopy for spatial temperature and soot distribution (2016) (26)
- Influence of EGR and Pilot Injection on PCCI Combustion in a Single-Cylinder Diesel Engine (2011) (26)
- Toxicity and mutagenicity of exhaust from compressed natural gas: Could this be a clean solution for megacities with mixed-traffic conditions? (2018) (26)
- Laser ignition and flame kernel characterization of HCNG in a constant volume combustion chamber (2017) (26)
- Studying the Influence of Direct Injection on PCCI Combustion and Emissions at Engine Idle Condition Using Two Dimensional CFD and Stochastic Reactor Model (2008) (25)
- Karanja oil utilization in a direct-injection engine by preheating. Part 2: experimental investigations of engine durability and lubricating oil properties (2010) (25)
- Coal and Biomass Gasification (2018) (25)
- Numerical investigations of piston cooling using oil jet in heavy duty diesel engines (2006) (25)
- Liquid film thickness inside the high pressure swirl injectors: Real scale measurement and evaluation of analytical equations (2010) (25)
- Performance and Emission Investigations of Jatropha and Karanja Biodiesels in a Single-Cylinder Compression-Ignition Engine Using Endoscopic Imaging (2016) (25)
- Knock Characteristics in Liquefied Petroleum Gas (LPG)−Dimethyl Ether (DME) and Gasoline−DME Homogeneous Charge Compression Ignition Engines (2009) (25)
- Morphology and nano-structure of soot in diesel spray and in engine exhaust (2017) (25)
- A Comparative Morphological Study of Primary and Aged Particles Emitted from a Biodiesel (B20) vis-à;-vis Diesel Fuelled CRDI Engine (2014) (25)
- Assessment of toxic potential of primary and secondary particulates/aerosols from biodiesel vis-à-vis mineral diesel fuelled engine (2013) (24)
- Handbook of Combustion: Online (2010) (24)
- Effect of compression ratio on combustion, performance and emissions of a laser ignited single cylinder hydrogen engine (2015) (24)
- Fuel-Injection Strategy for PCCI Engine Fueled by Mineral Diesel and Biodiesel Blends (2017) (24)
- Emissions from diesel versus biodiesel fuel used in a CRDI SUV engine: PM mass and chemical composition (2011) (24)
- Applied Embryology of the Thyroid and Parathyroid Glands (2012) (24)
- Development of Autonomous Advanced Disinfection Tunnel to Tackle External Surface Disinfection of COVID-19 Virus in Public Places (2020) (23)
- Utilization of primary alcohols in dual-fuel injection mode in a gasoline direct injection engine (2020) (23)
- Modeling and Simulation of Turbulent Combustion (2018) (23)
- Time resolved in-situ biodiesel combustion visualization using engine endoscopy (2015) (23)
- Operating Range of Low Temperature Diesel Combustion with Supercharging (2009) (23)
- Diesel-fuelled homogeneous charge compression ignition engine with optimized premixing strategies (2007) (23)
- Evaluation and visualization of stratified ultra-lean combustion characteristics in a spray-guided type gasoline direct-injection engine (2014) (23)
- INTERNAL AND NEAR-NOZZLE FLOW OF A PRESSURE-SWIRL ATOMIZER UNDER VARIED FUEL TEMPERATURE (2007) (22)
- Gasoline−Di-methyl Ether Homogeneous Charge Compression Ignition Engine (2007) (22)
- Experimental evaluation of sensitivity of low-temperature combustion to intake charge temperature and fuel properties (2018) (22)
- Effect of spark timing on laser ignition and spark ignition modes in a hydrogen enriched compressed natural gas fuelled engine (2020) (22)
- Improvement of diesel combustion with multiple injections at cold condition in a constant volume combustion chamber (2017) (22)
- Acetaldehyde hydrogenation over a Cu/SiO2 catalyst (1988) (22)
- Effect of Fuel Injection Pressure and Engine Speed on Performance, Emissions, Combustion, and Particulate Investigations of Gasohols Fuelled Gasoline Direct Injection Engine (2020) (22)
- Hydraulic Simulation and Experimental Analysis of Needle Response and Controlled Injection Rate Shape Characteristics in a Piezo-driven Diesel Injector (2006) (22)
- Effect of laser pulse energy on the laser ignition of compressed natural gas fueled engine (2014) (22)
- Flame Propagation Characteristics in a Heavy Duty LPG Engine with Liquid Phase Port Injection (2002) (21)
- Macroscopic and Microscopic Spray Characteristics of Diesel and Karanja Biodiesel Blends (2016) (21)
- Toxic Potential Evaluation of Particulate Matter Emitted from a Constant Speed Compression Ignition Engine: A Comparison between Straight Vegetable Oil and Mineral Diesel (2010) (21)
- Experimental investigations of preheated jatropha oil fuelled direct injection compression ignition engine - Part 1: Performance, emission, and combustion characteristics. (2010) (21)
- In-Cylinder Flow Evolution Using Tomographic Particle Imaging Velocimetry in an Internal Combustion Engine (2018) (21)
- Numerical and Experimental Investigation of Oil Jet Cooled Piston (2005) (21)
- Effect of focal size on the laser ignition of compressed natural gas–air mixture (2014) (21)
- Fuel Injection Strategy for Utilization of Mineral Diesel-Methanol Blend in a Common Rail Direct Injection Engine (2020) (20)
- Modeling of flame lift-off length in diesel low-temperature combustion with multi-dimensional CFD based on the flame surface density and extinction concept (2010) (20)
- Effects of Single and Double Post Injections on Diesel PCCI Combustion (2013) (20)
- Performance and emission evaluation of a small-bore biodiesel compression-ignition engine (2019) (20)
- Effect of Multiple Injections on Particulate Size-Number Distributions in a Common Rail Direct Injection Engine Fueled with Karanja Biodiesel Blends (2013) (20)
- Performance and emission evaluation of a small-bore biodiesel compression-ignition engine (2019) (20)
- Spatial combustion analysis of biodiesel fueled engine using combustion chamber endoscopy and modeling (2016) (20)
- In-Cylinder Spray and Combustion Investigations in a Heavy-Duty Optical Engine Fueled With Waste Cooking Oil, Jatropha, and Karanja Biodiesels (2018) (19)
- Experimental validation of accuracy of dynamic hydrogen-compressed natural gas mixing system using a single cylinder spark ignition engine (2016) (19)
- Investigations on the effect of measurement errors on estimated combustion and performance parameters in HCCI combustion engine (2013) (19)
- Lubricating Oil Tribology of a Biodiesel-Fuelled Compression Ignition Engine (2003) (19)
- Experimental Investigation of Close-Loop Control of HCCI Engine Using Dual Fuel Approach (2013) (19)
- Influence of injector spray angle and gasoline-diesel blending ratio on the low load operation in a gasoline compression ignition (GCI) engine (2018) (19)
- Effects of Exhaust Throttling on Engine Performance and Residual Gas in an SI Engine (2004) (19)
- In-cylinder air-flow characteristics of different intake port geometries using tomographic PIV (2017) (19)
- Effects of Hydrogen Ratio and EGR on Combustion and Emissions in a Hydrogen/Diesel Dual-Fuel PCCI Engine (2015) (19)
- In-Cylinder Spray and Combustion Investigations in a Heavy-Duty Optical Engine Fueled With Waste Cooking Oil, Jatropha, and Karanja Biodiesels (2018) (19)
- Experimental Investigation of the Effect of Exhaust Gas Recirculation on Lubricating Oil Degradation and Wear of a Compression Ignition Engine (2006) (19)
- EFFECT OF MULTIPLE INJECTIONS ON FUEL-AIR MIXING AND SOOT FORMATION IN DIESEL COMBUSTION USING DIRECT FLAME VISUALIZATION AND CFD TECHNIQUES (2005) (19)
- Combustion characteristics of gasoline and n-butane under lean stratified mixture conditions in a spray-guided direct injection spark ignition engine (2017) (19)
- Determination of important biodiesel properties based on fuel temperature correlations for application in a locomotive engine (2015) (19)
- Field Trials of Biodiesel (B100) and Diesel Fuelled Common Rail Direct Injection Euro-III Compliant Sports Utility Vehicles in Indian Conditions (2008) (19)
- Physico-chemical speciation of particulates emanating from Karanja biodiesel fuelled automotive engine (2015) (18)
- Evaluation of ground water potential in the environs of Jhansi city, Uttar Pradesh using hydrogeomorphological assessment by satellite remote sensing technique (1992) (18)
- Post injection in a compression ignition engine fueled with dimethyl-ether (2013) (18)
- Laser Ignition of Single Cylinder Engine and Effects of Ignition Location (2013) (18)
- The operation characteristics of a liquefied petroleum gas (LPG) spark-ignition free piston engine (2016) (18)
- Experimental investigations of mineral diesel/methanol-fueled reactivity controlled compression ignition engine operated at variable engine loads and premixed ratios (2020) (18)
- HRTEM evaluation of primary soot particles originated in a small-bore biofuel compression-ignition engine (2019) (17)
- HRTEM evaluation of primary soot particles originated in a small-bore biofuel compression-ignition engine (2019) (17)
- Oxidation Stability, Engine Performance and Emissions Investigations of Karanja, Neem and Jatropha Biodiesel and Blends (2011) (17)
- Particulate Bound Trace Metals and Soot Morphology of Gasohol Fueled Gasoline Direct Injection Engine (2019) (17)
- Wear Evaluation of Engine Piston Rings Coated With Dual Layer Hard and Soft Coatings (2018) (17)
- The Effects of Spark Timing and Equivalence Ratio on Spark-Ignition Linear Engine Operation with Liquefied Petroleum Gas (2012) (17)
- Particulate characteristics of laser ignited hydrogen enriched compressed natural gas engine (2020) (16)
- Comparative study of macroscopic spray parameters and fuel atomization behaviour of SVO (Jatropha), its biodiesel and blends (2013) (16)
- Combustion characteristics and flame-kernel development of a laser ignited hydrogen–air mixture in a constant volume combustion chamber (2014) (16)
- A comprehensive analysis of multiple injection strategies for improving diesel combustion process under cold-start conditions (2019) (16)
- Effects of operating parameters on mode transition between low-temperature combustion and conventional combustion in a light-duty diesel engine (2013) (16)
- Effects of internal exhaust gas recirculation on controlled auto-ignition in a methane engine combustion (2009) (16)
- Effect of Fuel Injection Pressure and Premixed Ratio on Mineral Diesel-Methanol Fueled Reactivity Controlled Compression Ignition Mode Combustion Engine (2020) (16)
- Effect of Start of Injection on the Particulate Emission from Methanol Fuelled HCCI Engine (2011) (16)
- Particulate characteristics of low-temperature combustion (PCCI and RCCI) strategies in single cylinder research engine for developing sustainable and cleaner transportation solution. (2021) (16)
- Endoscopic combustion characterization of Jatropha biodiesel in a compression ignition engine (2017) (15)
- Particulate Emissions From Karanja Biodiesel Fueled Turbocharged CRDI Sports Utility Vehicle Engine (2015) (15)
- An investigation on the effects of late intake valve closing and exhaust gas recirculation in a single-cylinder research diesel engine in the low-load condition (2016) (15)
- Partially Homogenous Charge Compression Ignition Engine Development for Low Volatility Fuels (2017) (15)
- Laser cleaning of optical windows in internal combustion engines (2007) (15)
- Experimental investigation of particulate matter structures under partially premixed combustion in a compression ignition engine (2020) (15)
- Combustion Mode Switching Characteristics of a Medium-Duty Engine Operated in CI/ PCCI Combustion Modes (2018) (15)
- Combustion and Emission Behavior of Ethanol Fuelled Homogeneous Charge Compression Ignition (HCCI) Engine (2008) (15)
- Two axis tracking system for solar concentrators (1992) (15)
- Low-Temperature Combustion: An Advanced Technology for Internal Combustion Engines (2018) (15)
- Effect of intake air temperature and air–fuel ratio on particulates in gasoline and n-butanolfueled homogeneous charge compression ignition engine (2014) (15)
- Controlled auto-ignition characteristics of methane–air mixture in a rapid intake compression and expansion machine (2010) (15)
- Performance and emission characteristics of conventional diesel combustion/partially premixed charge compression ignition combustion mode switching of biodiesel-fueled engine (2019) (15)
- Introduction to Air Pollution and Its Control (2018) (15)
- Effect of Mixture Formation Mode on the Combustion and Emission Characteristics in a Hydrogen Direct-Injection Engine under Different Load Conditions (2022) (14)
- Future Automotive Powertrains for India: Methanol Versus Electric Vehicles (2019) (14)
- Biodiesel Spray Characteristics and Their Effect on Engine Combustion and Particulate Emissions (2020) (14)
- Development of low cost mixed metal oxide based diesel oxidation catalysts and their comparative performance evaluation (2016) (14)
- Combustion, performance and emissions characteristics of a newly developed CRDI single cylinder diesel engine (2015) (14)
- Experimental Investigation of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine—Part 2: Engine Durability and Effect on Lubricating Oil (2010) (14)
- Comparative investigations of flame kernel development in a laser ignited hydrogen–air mixture and methane–air mixture (2013) (14)
- Schlieren, Shadowgraph, Mie-scattering visualization of diesel and gasoline sprays in high pressure/high temperature chamber under GDCI engine low load condition (2018) (14)
- Diesel Spray Characteristics of Common-Rail VCO Nozzle Injector (2000) (14)
- Spray and Combustion Visualization of Gasoline and Diesel under Different Ambient Conditions in a Constant Volume Chamber (2013) (14)
- Experimental investigation of varying composition of HCNG on performance and combustion characteristics of a SI engine (2017) (14)
- Process optimisation of base catalysed transesterification of Karanja oil for biodiesel production (2009) (13)
- Effect of injector configurations on combustion and emissions in a gasoline direct-injection compression ignition engine under low-load conditions (2016) (13)
- Tribological studies of dual-coating (intermediate hard with top epoxy-graphene-base oil composite layers) on tool steel in dry and lubricated conditions (2018) (13)
- The application of an exhaust heat exchanger to protect the catalyst and improve the fuel economy in a spark-ignition engine (2007) (13)
- Mode Transition between Low Temperature Combustion and Conventional Combustion with EGR and Injection Modulation in a Diesel Engine (2011) (13)
- Endoscopic visualization of engine combustion chamber using diesoline, diesosene and mineral diesel for comparative spatial soot and temperature distributions (2019) (13)
- Numerical simulation of cooling performance of an exhaust gas recirculation (EGR) cooler using nano-fluids (2017) (13)
- Characterization of combustion process and emissions in a natural gas/diesel dual-fuel compression-ignition engine (2021) (13)
- Tomographic Particle Image Velocimetry for Flow Analysis in a Single Cylinder Optical Engine (2015) (12)
- Development and Validation of a Comprehensive CFD Model of Diesel Spray Atomization Accounting for High Weber Numbers (2006) (12)
- The Influence of Fuel Injection Pressure and Intake Pressure on Conventional and Low Temperature Diesel Combustion (2012) (12)
- Simulation of Fuel/Air Mixture Formation for Heavy Duty Liquid Phase LPG Injection (LPLI) Engines (2003) (12)
- Techniques to Control Emissions from a Diesel Engine (2018) (12)
- Effect of oxygen concentration on highly diluted charge compression ignition combustion in an optical engine (2015) (12)
- Laser-assisted homogeneous charge ignition in a constant volume combustion chamber (2009) (12)
- Lean combustion of stratified hydrogen in a constant volume chamber (2021) (12)
- Optimisation of Karanja/Jatropha-Methanol emulsification variables and their engine evaluation (2016) (12)
- A qualitative correlation between engine exhaust particulate number and mass emissions (2017) (12)
- The spray characteristics of a pressure-swirl injector with various exit plane tilts (2008) (12)
- Kinetics of oxidation of cumene over supported NiO and NiMoO4 catalysts (1976) (12)
- Effect of injection and ignition timing on a hydrogen-lean stratified charge combustion engine (2021) (12)
- Particle Characterization of Soot Aggregates Emitted by Gasohol Fueled Direct Injection Engine (2019) (12)
- Measurement, Analysis and Remediation of Environmental Pollutants (2020) (12)
- The Effect of Injection Location of DME and LPG in a Dual Fuel HCCI Engine (2009) (12)
- Strategy for Mode Transition between Low Temperature Combustion and Conventional Combustion in a Diesel Engine (2013) (12)
- Experimental Investigations of the Tribological Properties of Lubricating Oil from Biodiesel Fuelled Medium Duty Transportation CIDI Engine (2008) (12)
- CI/PCCI Combustion Mode Switching of Diesohol Fuelled Production Engine (2017) (12)
- Karanja oil utilization in a direct-injection engine by preheating. Part 1: experimental investigations of engine performance, emissions, and combustion characteristics (2010) (12)
- Behavior of hydrogen hollow-cone spray depending on the ambient pressure (2020) (12)
- Effect of laser pulse energy on laser ignition of port fuel injected hydrogen engine (2016) (11)
- Introduction to Applications of Solar Energy (2018) (11)
- Environmental, Chemical and Medical Sensors (2018) (11)
- Biofuels : technology, challenges and prospects (2017) (11)
- Comparative wear performance of titanium based coatings for automotive applications using exhaust gas recirculation (2007) (11)
- Rice bran oil methyl ester fuelled medium-duty transportation engine : long-term durability and combustion investigations (2009) (11)
- Di-ethyl ether-diesel blends fuelled off-road tractor engine: Part-II: Unregulated and particulate emission characteristics (2022) (11)
- Injection Strategy in Natural Gas–Diesel Dual-Fuel Premixed Charge Compression Ignition Combustion under Low Load Conditions (2019) (11)
- Spray evolution, engine performance, emissions and combustion characterization of Karanja biodiesel fuelled common rail turbocharged direct injection transportation engine (2016) (11)
- The Effects of Tumble Flow on Lean Burn Characteristics in a Four-Valve SI Engine (1997) (11)
- Particulate morphology of waste cooking oil biodiesel and diesel in a heavy duty diesel engine (2014) (11)
- Combustion Characteristics of Jatropha Oil Blends in a Transportation Engine (2008) (11)
- Experimental evaluation of laser ignited hydrogen enriched compressed natural gas fueled supercharged engine (2021) (11)
- Effect of Injector Nozzle Hole Geometry on Particulate Emissions in a Downsized Direct Injection Gasoline Engine (2017) (11)
- Endoscopic Combustion Visualization for Spatial Distribution of Soot and Flame Temperature in a Diesohol Fueled Compression Ignition Engine (2016) (10)
- Emission reduction through internal and low-pressure loop exhaust gas recirculation configuration with negative valve overlap and late intake valve closing strategy in a compression ignition engine (2017) (10)
- Gas Flows Through the Inter-Ring Crevice and Their Influence on UHC Emissions (1999) (10)
- Air Pollution and Control (2018) (10)
- Biomass-derived provenance dominates glacial surface organic carbon in the western Himalaya. (2020) (10)
- Giant Cell Tumor of the Sphenoid Bone (1975) (10)
- Effect of laser parameters and compression ratio on particulate emissions from a laser ignited hydrogen engine (2017) (10)
- Effect of Intake Charge Temperature and EGR on Biodiesel Fuelled HCCI Engine (2016) (10)
- High-Frequency Ignition Characteristics in a 4-Valve SI Engine with Tumble-Swirl Flows (1998) (10)
- A cleaner route of biodiesel production from waste frying oil using novel potassium tin oxide catalyst: A smart liquid-waste management. (2021) (10)
- Unregulated and Regulated Emissions from Biodiesel Fuelled CRDI SUV Engine (2015) (10)
- Nano-Energetic Materials (2019) (10)
- Prevalence of Candidiasis, Trichomoniasis and Bacterial Vaginosis among Women of Reproductive Age Group (2013) (10)
- Chemical composition of diesel particulate matter and its control (2019) (10)
- Development of a Reduced Chemical Kinetic Mechanism and Ignition Delay Measurement in a Rapid Compression Machine for CAI Combustion (2007) (10)
- The Influence of Injector Parameters on Diesel Spray (2002) (10)
- Biogas for Transport Sector: Current Status, Barriers, and Path Forward for Large-Scale Adaptation (2019) (9)
- Effects of a split injection in a spray-guided direct-injection spark ignition engine under lean stratified operation (2014) (9)
- Application of jet propellant-8 to premixed charge ignition combustion in a single-cylinder diesel engine (2015) (9)
- Electrifying passenger road transport in India requires near-term electricity grid decarbonisation (2022) (9)
- Assessment of Soot Particles in an Exhaust Gas for Low Temperature Diesel Combustion with High EGR in a Heavy Duty Compression Ignition Engine (2013) (9)
- Joonsik Hwang, Donghui Qi, Yongjin Jung, Choongsik Bae, Effect of Injection Parameters on the Combustion and Emission Characteristics in a Compression Ignition Engine Fuelled with Waste Cooking Oil Biodiesel (2013) (9)
- Experimental and Numerical Investigations of Jet Impingement Cooling of Piston of Heavy-Duty Diesel Engine for Controlling the Non-Tail Pipe Emissions (2007) (9)
- Effects of Spray Droplet Size and Velocity Distributions on Emissions from a Single Cylinder Biofuel Engine (2016) (9)
- Spray and flow-field interaction of gasoline direct injection (2004) (9)
- Development and comparative experimental investigations of laser plasma and spark plasma ignited hydrogen enriched compressed natural gas fueled engine (2020) (9)
- Influence of plasma-assisted ignition on flame propagation and performance in a spark-ignition engine (2021) (9)
- Radial Basis Function Artificial Neural Network: Spread Selection (2012) (9)
- EFFECT OF NOZZLE HOLE GEOMETRY ON NON-EVAPORATING DIESEL SPRAY CHARACTERISTICS AT HIGH-PRESSURE INJECTION (2012) (9)
- Oxidation Stability of Biodiesel Produced from Non-Edible Oils of African Origin (2011) (9)
- Parametric study of a laser ignited hydrogen–air mixture in a constant volume combustion chamber (2014) (9)
- Performance evaluation of a biodiesel fuelled transportation engine retrofitted with a non-noble metal catalysed diesel oxidation catalyst for controlling unregulated emissions. (2018) (9)
- Wear Assessment in a Biodiesel Fuelled Compression Ignition Engine (2001) (9)
- Improvement of DME HCCI Engine Performance by Fuel Injection Strategies and EGR (2008) (9)
- Emission and Combustion Characteristics of Vegetable Oil (Jatropha curcus) Blends in an Indirect Ignition Transportation Engine (2008) (9)
- COMPARATIVE STUDY OF MACROSCOPIC SPRAY PARAMETERS AND FUEL ATOMIZATION BEHAVIOUR OF STRAIGHT VEGETABLE OILS (JATROPHA), ITS BIODIESEL AND BLENDS (2013) (9)
- Comparative effect of dietary administration of Lathyrus sativus pulse on behaviour, neurotransmitter receptors and membrane permeability in rats and guinea pigs (2002) (9)
- The Effects of Pilot Injection on Combustion in Dimethyl-ether (DME) Direct Injection Compression Ignition Engine (2007) (9)
- Introduction to Droplets and Sprays: Applications for Combustion and Propulsion (2018) (8)
- Particulate Morphology and Toxicity of an Alcohol Fuelled HCCI Engine (2014) (8)
- Impact of Ethanol in Ethanol Blended Gasoline on the Spray Characteristics of Piezo Actuated Outward-Opening Injector (2009) (8)
- Reactivity-Controlled Compression Ignition Combustion Using Alcohols (2018) (8)
- Particulate Matter and Its Impact on Human Health in Urban Settings (2018) (8)
- Combustion for Power Generation and Transportation (2017) (8)
- Environmental Contaminants: Measurement, Modelling and Control (2018) (8)
- Evaluation of reactivity controlled compression ignition mode combustion engine using mineral diesel/gasoline fuel pair (2021) (8)
- Prospects of Methanol-Fuelled Carburetted Two Wheelers in Developing Countries (2019) (8)
- Challenges and Opportunities for Application of Reactivity-Controlled Compression Ignition Combustion in Commercially Viable Transport Engines (2022) (8)
- Experimental Investigation on Intake Air Temperature and Air-Fuel Ratio Dependence of Random and Deterministic Cyclic Variability in a Homogeneous Charge Compression Ignition Engine (2011) (8)
- The Secondary Organic Carbon (SOC) Formation from a CRDI Automotive Diesel Engine Exhaust (2011) (7)
- Introduction to Greenhouse Gas Emissions (2018) (7)
- Prospects of Alternative Transportation Fuels (2017) (7)
- Gasoline Direct Injection Engines and Particulate Emissions (2018) (7)
- Performance, Emissions and Combustion Characterization of Biodiesel in a Generator Engine (2011) (7)
- Influence of the Injector Geometry at 250 MPa Injection in a Light-Duty Diesel Engine (2017) (7)
- Toxicity of exhaust particulates and gaseous emissions from gasohol (ethanol blended gasoline)-fuelled spark ignition engines. (2020) (7)
- Development of a conceptual sediment graph model. (1990) (7)
- Effect of hydrogen enrichment of compressed natural gas on combustible limit and flame kernel evolution in a constant volume combustion chamber using laser ignition (2021) (7)
- Greenhouse Gas Emissions: Challenges, Technologies and Solutions (2019) (7)
- The Dual-Fueled Homogeneous Charge Compression Ignition Engine Using Liquefied Petroleum Gas and Di-methyl Ether (2007) (7)
- Particulate Characterization of CNG Fuelled Public Transport Vehicles at Traffic Junctions (2015) (7)
- Spark assisted premixed charge compression ignition engine prototype development (2016) (7)
- Natural Gas Engines : For Transportation and Power Generation (2018) (7)
- The Effects of Two-Stage Fuel Injection on Dimethyl-ether (DME) Homogeneous Charge Compression Ignition Engine Combustion (2009) (7)
- Effect of electroconvulsive shock on central cholinergic (muscarinic) receptors (1982) (7)
- Combustion Characteristics of Stratified Mixture in Lean-Burn Liquefied Petroleum Gas Direct-Injection Engine With Spray-Guided Combustion System (2016) (7)
- Effect of Swirl Ratio and Piston Geometry on the Late-Compression Mean Air-Flow in a Diesel Engine (2021) (6)
- Tomographic PIV Evaluation of In-Cylinder Flow Evolution and Effect of Engine Speed (2016) (6)
- Characteristics of Particulates Emitted by IC Engines Using Advanced Combustion Strategies (2018) (6)
- Particulate Characterization of Biodiesel Fuelled Compression Ignition Engine (2009) (6)
- Bidirectional transfer learning model for sentiment analysis of natural language (2021) (6)
- Effects of Hot and Cooled EGR for HC Reduction in a Dual-Fuel Premixed Charge Compression Ignition Engine (2018) (6)
- Effects of Stratified EGR on the Performance of a Liquid Phase LPG Injection Engine (2004) (6)
- Conceptual Design of a Body Bag for Preventing Infections and Safe Disposal of Deceased from COVID-19 Virus (2020) (6)
- Analysis and Application of Support Vector Machine Based Simulation for Runoff and Sediment Yield (2007) (6)
- An evaluation of the emission profile for two-wheelers at a traffic junction (2015) (6)
- Experimental Investigations on the Effect of Liner Surface Properties on Wear in Non-Firing Engine Simulator (2004) (6)
- Spray and Combustion of Diesel Fuel under Simulated Cold-Start Conditions at Various Ambient Temperatures (2017) (6)
- Macroscopic Characteristics of Evaporating Dimethyl Ether(DME) Spray (2003) (6)
- Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 3—Wear Assessment of Liner and Piston Rings, Engine Deposits, and Operational Issues (2021) (6)
- Microscopic and Macroscopic Spray Characteristics of GDI Injector Using Gasohol Fuels at Various Injection Pressures (2016) (6)
- Combustion phenomena affecting particle emission under boosting conditions in a turbocharged gasoline direct injection engine (2021) (6)
- Introduction: Two-Phase Flow for Automotive and Power Generation Sectors (2018) (6)
- An Experimental Measurement of Lubrication Behavior of Piston Rings in a Spark Ignition Engine (2002) (6)
- Hydrogen for Internal Combustion Engines (2018) (6)
- Experimental Investigations of Particulate Emitted by an Alcohol-Fuelled HCCI/CAI Combustion Engine (2012) (6)
- Numerical Investigations Of Piston Cooling Using Oil Jet (2004) (6)
- Design and Development of a Portable Disinfectant Device (2020) (6)
- Expansion of Operating Range and Reduction of Engine out Emission in Low Temperature Diesel Combustion with Boosting (2009) (6)
- In-Cylinder Air-Flow Characteristics Using Tomographic PIV at Different Engine Speeds, Intake Air Temperatures and Intake Valve Deactivation in a Single Cylinder Optical Research Engine (2016) (6)
- Tribological characterisation of epoxy–graphene–liquid filler composite coatings on steel under base oil external lubrication (2018) (6)
- Hydrogenolysis of Glycerol with FeCo Macrocyclic Complex Bonded to Raney Nickel Support Under Mild Reaction Conditions (2010) (6)
- Simulations of methanol fueled locomotive engine using high pressure co-axial direct injection system (2021) (6)
- Influence of Ultra-high Injection Pressure and Nozzle Hole Diameter on Diesel Flow and Spray Characteristics under Evaporating Condition (2015) (6)
- Experimental investigations of methanol fumigation via port fuel injection in preheated intake air in a single cylinder dual-fuel diesel engine (2022) (6)
- The effects of late intake valve closing and different cam profiles on the in-cylinder flow field and the combustion characteristics of a compression ignition engine (2018) (6)
- Effects of Two-Stage Injection on Combustion and Exhaust Emission Characteristics in a HCCI Engine (2004) (6)
- Rainfall -Runoff Modelling using Multi Layer Perceptron Technique - A Case Study of the Upper Kharun Catchment in Chhattisgarh (2013) (5)
- Enhanced emission of linalool from floral scent volatile bouquet in Jasminum auriculatum variants developed via gamma irradiation (2020) (5)
- Engine durability and lubricating oil tribology study of a biodiesel fuelled common rail direct injection medium-duty transportation diesel engine (2021) (5)
- Introduction of Methanol: A Sustainable Transport Fuel for SI Engines (2021) (5)
- Effect of Injection Strategy on Low Temperature - Conventional Diesel Combustion Mode Transition (2015) (5)
- Fuel injection strategy optimisation and experimental performance and emissions evaluation of diesel displacement by port fuel injected methanol in a retrofitted mid-size genset engine prototype (2022) (5)
- Particle Reduction in LPG Lean Stratified Combustion by Intake Strategies (2019) (5)
- Estimation of Air Fuel Ratio of a SI Engine from Exhaust Gas Temperature at Cold Start Condition (2002) (5)
- Development of a single cylinder CNG direct injection engine and its performance, emissions and combustion characteristics (2015) (5)
- Static Pressure Distribution inside the Swirl Spray (2006) (5)
- Advances in Carbon Capture and Utilization (2021) (5)
- Di-ethyl ether-diesel blends fuelled off-road tractor engine: Part-I: Technical feasibility (2022) (5)
- Compressed Natural Gas and Hythane for On-road Passenger and Commercial Vehicles (2018) (5)
- Time series model of stream flow for a catchment of Ramganga River (1988) (5)
- Characterization of an evaporating direct-injected gasoline spray using laser-induced exciplex fluorescence and particle image velocimetry techniques (2004) (5)
- Exhaust Gas Recirculation in a Spark-Ignition LPG Engine (2001) (5)
- Diesel Knock Visualization and Frequency Analysis of Premixed Charge Compression Ignition Combustion with a Narrow Injection Angle (2013) (5)
- Analysis of barriers in green human resource implementation for enhancing organizational sustainability: a DEMATEL approach (2022) (5)
- DIESEL EXHAUST PARTICULATES CHARACTERIZATION FOR HEAVY METALS (2014) (5)
- Hydrogen-Enriched Compressed Natural Gas: An Alternate Fuel for IC Engines (2018) (5)
- Introduction to Sensors for Aerospace and Automotive Applications (2018) (5)
- Particulate Emissions From Karanja Biodiesel Fuelled Turbocharged CRDI SUV Engine (2014) (5)
- Measurement of Lubricating Oil Film Thickness between Piston Ring -liner Interface in an Engine Simulator (2008) (5)
- Particulate Morphology Characterization of Butanol–Gasoline Blend Fueled Spark-Ignition Direct Injection Engine (2020) (5)
- Numerical Predictions of In-Cylinder Phenomenon in Methanol Fueled Locomotive Engine Using High Pressure Direct Injection Technique (2021) (5)
- Introduction of Methanol and Alternate Fuel Economy (2018) (5)
- Liver involvement in patients with coeliac disease: proof of causality using IgA/anti-TG2 colocalisation techniques (2021) (5)
- Performance, Emission and Combustion Characteristics of Preheated and Blended Jatropha Oil (2012) (5)
- Overview, Advancements and Challenges in Gasoline Direct Injection Engine Technology (2019) (5)
- Introduction to Environmental Protection and Management (2018) (5)
- Prospects and Challenges for Deploying Direct Injection Technology for Compressed Natural Gas Engines (2018) (5)
- Improvement of Premixed Compression Ignition Combustion using Various Injector Configurations (2011) (5)
- Homogeneous Charge Compression Ignition Engine with Two-Stage Diesel Fuel Injection (2004) (5)
- Development of port fuel injected methanol (M85)-fuelled two-wheeler for sustainable transport (2020) (5)
- PERFORMANCE EVALUATION AND TRIBOLOGICAL STUDIES ON A BIODIESEL- FUELLED COMPRESSION IGNITION ENGINE (2013) (5)
- Modelling Aspects for Adaptation of Alternative Fuels in IC Engines (2019) (5)
- Artificial Neural Networks And Their Appication For Simulation And Prediction Of Runoff And Sediment Yield (2002) (4)
- Biodiesel PCI Combustion for Performance and Emission Improvement in a Compression Ignition Engine (2021) (4)
- Material Compatibility, Technical Challenges and Modifications Required for DME Adaptation in Compression Ignition Engines (2021) (4)
- Introduction of Alternative Fuels (2018) (4)
- Combustion Characteristics of Stratified Mixture in Lean-Burn LPG Direct-Injection Engine With Spray-Guided Combustion System (2014) (4)
- Macroscopic Spray Parameters of Karanja Oil and Blends: A Comparative Study (2012) (4)
- Comparative Evaluation of Turbochargers for High Horsepower Diesel-Electric Locomotives (2013) (4)
- EFFECT OF TEXTURE, FLOW, AND SLOPE ON INTERRLLL SEDIMENT TRANSPORT (1991) (4)
- Diesel fuel particulate emission control using low-cost catalytic materials (2021) (4)
- Portable biogas bottling plant: a practical approach for using biogas as transportation fuel in rural areas (2009) (4)
- Flow characteristics of misfired gas in the exhaust manifold of a spark ignition engine (2000) (4)
- Underground Structures Subjected to Various Blast Loading Scenarios: A Scoping Review (2021) (4)
- Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine—Part I: Combustion, Performance, and Emission Studies (2020) (4)
- Noise, Vibrations and Combustion Investigations of Preheated Jatropha Oil in a Single Cylinder Genset Engine (2015) (4)
- Applications Paradigms of Droplet and Spray Transport: Paradigms and Applications (2018) (4)
- Effect of EGR and Supercharging on the Diesel HCCI Combustion (2006) (4)
- Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation (2021) (4)
- Laser Ignition of Hydrogen Enriched Compressed Natural Gas (HCNG) Fueled Supercharged Engine (2017) (4)
- Effect of Texture, Rainfall and Slope on Rainfall Interrill Sediment Transport (1991) (4)
- Hypokalaemic Paralysis Associated with COVID-19 Infection. (2021) (4)
- Energy Sustainability in Built and Urban Environments (2019) (4)
- Tribological Studies of an Internal Combustion Engine (2018) (4)
- Diffusion- and Homogeneous-Charge Combustion of Volatile Ethers in a Compression Ignition Engine (2009) (4)
- An Experimental Investigation on Spray Characteristics of Waste Cooking Oil, Jatropha, and Karanja Biodiesels in a Constant Volume Combustion Chamber (2016) (4)
- Future Mobility Solutions of Indian Automotive Industry: BS-VI, Hybrid, and Electric Vehicles (2018) (4)
- A Historical Perspective on Paper Microfluidic Based Point-of-Care Diagnostics (2019) (4)
- Ricebran Oil Biodiesel's Performance, Emission and Endurance Test on a CIDI Transport Engine (2008) (4)
- Diesel Spray Development From VCO Nozzles With Common-Rail (2001) (4)
- Anti-vapor Lock of a Top-Feed Injector for a Liquefied Petroleum Gas Liquid-Phase Injection Engine (2009) (4)
- Reactivity Controlled Compression Ignition Engine Fueled With Mineral Diesel and Butanol at Varying Premixed Ratios and Loads (4)
- Genetic programming approach on evaporation losses and its effect on climate change for Vaipar Basin (2011) (4)
- Effect of Breathing Characteristics on the Performance in Spark-Ignition Engines (2000) (4)
- Operational Parameters of a Diesel Engine Running on Diesel–Rapeseed Oil–Methanol–Iso-Butanol Blends (2021) (4)
- Improvement of instantaneous turbine efficiency through late intake valve phase (LIVP) in a turbocharged-gasoline direct injection (T-GDI) engine (2020) (4)
- Low Temperature Combustion Engines and Mode Switching Strategies – A review (2018) (4)
- Applications of Solar Energy (2018) (4)
- Effect of a conical nozzle orifice on the combustion and emissions in a direct-injection compression ignition engine under low-load conditions (2015) (4)
- Premixed compression ignition combustion with various injector configurations in a heavy duty diesel engine (2013) (4)
- Effects of High-Response TiAl Turbine Wheel on Engine Performance under Transient Conditions (2015) (4)
- Effect of Injection Pressure and Injection Timing on Combustion Characteristics of Spray-Guided Direct-Injection Spark-Ignition Engine under Lean Stratified Combustion Operation (2011) (4)
- Imaging of Lean Premixed Flames in Spark-Ignition Engines (1994) (4)
- Numerical simulation of the fuel trapped in the crevice during a pilot injection in a homogeneous charge compression ignition engine (2014) (4)
- Alcohol-Fueled Reactivity-Controlled Compression Ignition Combustion for Partial Replacement of Mineral Diesel in Internal Combustion Engines (2021) (4)
- Evolving Energy Scenario: Role and Scope for Alternative Fuels in Transport Sector (2018) (4)
- An Experimental Investigation on Spray Characteristics of Waste Cooking Oil, Jatropha, and Karanja Biodiesels in a Constant Volume Combustion Chamber (2016) (4)
- Microscopic Spray Characteristics of Biodiesels Derived From Karanja, Jatropha, and Waste Cooking Oils (2020) (3)
- Evaluation of parasitological and serological techniques in diagnosis of amoebiasis. (1979) (3)
- Prospects and Challenges of DME Fueled Low-Temperature Combustion Engine Technology (2021) (3)
- The Natural History of Seminal Leukocytes in Men Seeking Infertility Evaluation (3)
- Advancing climate services in South Asia (2022) (3)
- Regulated, Unregulated, and Particulate Emissions From Biodiesel Blend Fueled Transportation Engine (2020) (3)
- Introduction to Biofuels (2017) (3)
- Diesel Exhaust Particulate Characterization for Poly Aromatic Hydrocarbons and Benzene Soluble Fraction (2005) (3)
- An application of complex demodulation technique to geomagnetic data and conductivity anomaly studies (1980) (3)
- Engine Emission Control Devices for Particulate Matter and Oxides of Nitrogen: Challenges and Emerging Trends (2021) (3)
- Design and Development of Double Helix Fuel Injection Pump for Four Stroke V-16 Rail Traction Diesel Engine (2007) (3)
- Smartphone-assisted real-time estimation of chlorophyll and carotenoid contents in spinach following the inversion of red and green color features (2021) (3)
- Toxicology of Combustion Products (2010) (3)
- Introduction to Advances in Solar Energy Research (2018) (3)
- Combustion and Emission Characteristics, and Emission Control of CNG Fueled Vehicles (2019) (3)
- Locomotives and Rail Road Transportation (2017) (3)
- Microscopic spray characteristics of ethanol and methanol blended gasoline in a direct injection spark ignition engine (2021) (3)
- Evolution , Trends and Applications of Endoscopy in Internal Combustion Engines (2015) (3)
- Novel Methodology to Utilise Neem (Azadirachta Indica) Oil in a Direct Injection Compression Ignition Engine: Performance and Emissions Characterization (2009) (3)
- Introduction to Nano-energetic Materials (2018) (3)
- Feasibility study of novel DME fuel injection equipment: Part 2- performance, combustion, regulated and unregulated emissions (2022) (3)
- Biodiesel Soot Characteristics (2018) (3)
- Prospects of Fuel Injection System for Dimethyl Ether Applications in Compression Ignition Engines (2021) (3)
- Introduction to Advanced Combustion Techniques and Engine Technologies for Automotive Sector (2019) (3)
- A Review on Energy, Environment, and Emissions Issues in Indian Road Transport Sector (2021) (3)
- Macroscopic spray characteristics of a gasohol fueled GDI injector and impact on engine combustion and particulate morphology (2021) (3)
- Feasibility Assessment of Methanol Fueling in Two-Wheeler Engine Using 1-D Simulations (2021) (3)
- Utilization of Alternative Fuels in Advanced Combustion Technologies (2018) (3)
- Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 1—No Load and Highway Driving Emissions, and Acceleration Characteristics (2021) (3)
- Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 2—Lubricating Oil Condition Monitoring (2021) (3)
- Prospects of Gasoline Compression Ignition (GCI) Engine Technology in Transport Sector (2019) (3)
- Life line: The Springs of Uttarakhand, India (2014) (3)
- Specialized metabolites contributing to colour and scent volatiles in Uvaria hamiltonii flowers (2019) (3)
- An Experimental Study of Microscopic Spray Characteristics of a GDI Injector Using Phase Doppler Interferometry (2016) (3)
- Development of an Electronic Fuel Injection System for a 4-Stroke Locomotive Diesel Engine (2012) (3)
- Feasibility study of novel DME fuel injection Equipment: Part 1- fuel injection strategies and spray characteristics (2022) (3)
- Near Nozzle Flow and Atomization Characteristics of Biodiesel Fuels (2017) (3)
- Regulated, Unregulated, and Particulate Emissions From Biodiesel Blend Fueled Transportation Engine (2020) (3)
- Microscopic Spray Characteristics of Biodiesels Derived From Karanja, Jatropha, and Waste Cooking Oils (2020) (3)
- Reduction of Exhaust Emissions Using Various Injector Configurations in Low Temperature Diesel Combustion (2011) (3)
- ESTIMATION OF THE BREAKUP LENGTH FOR A PRESSURE-SWIRL SPRAY FROM THE EXPERIMENTALLY MEASURED SPRAY ANGLE (2009) (3)
- Effects of Multi-Stage Split Injection on Efficiency and Emissions of Light-Duty Diesel Engine (2022) (3)
- Engine Controller for the Hydrocarbon Reduction during Cold Start in SI Engine (2002) (3)
- Experimental and Computational Investigation of Diesel and Gasoline Injection in a Direct Injection Compression Ignition Engine (2020) (3)
- Analysis of Transient Diesel Spray with Visualization and Injection Rate Measurement (2004) (3)
- Biodiesel Soot Characteristics (2018) (3)
- A new concept of misfire detection using a wide-range oxygen sensor in a spark-ignition engine (1999) (3)
- The Effect of Injection Angle and Nozzle Diameter on HCCI Combustion (2007) (3)
- Paper ID ICLASS 06-113 Static Pressure Distribution inside the Swirl Spray (2006) (3)
- Hydrogen homogeneous charge compression ignition (HCCI) engine with DME as an ignition promoter (2009) (3)
- Fuel Stratification in a Liquid-Phase LPG Injection Engine (2003) (3)
- Effect of Design Parameters on the Performance of Finned Exhaust Heat Exchanger (2003) (3)
- Flame Image Processing in a Four-Valve Spark-Ignition Engine (1996) (3)
- Control design for residual gas fraction in engine based on stochastic logical dynamics (2015) (3)
- CHARACTERIZATION OF PROTOTYPE HIGH-PRESSURE SWIRL INJECTOR NOZZLES, PART I: PROTOTYPE DEVELOPMENT AND INITIAL CHARACTERIZATION OF SPRAYS (2000) (3)
- Characterization of prototype high-pressure swirl injector nozzles, part II: CFD evaluation of internal flow (2000) (3)
- Near Nozzle Flow and Atomization Characteristics of Biodiesel Fuels (2017) (3)
- Diesel Locomotives of Indian Railways: A Technical History (2017) (2)
- Characteristics of Turbocharger with TiAl Turbine Wheel in a Downsizing GDI Engine (2013) (2)
- Lean-Burn Combustion in Direct-Injection Spark-Ignition Engines (2021) (2)
- Biofuels and the hybrid fuel sector. (2015) (2)
- Effect of swirl ratio on charge convection, temperature stratification, and combustion in gasoline compression ignition engine (2021) (2)
- Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine—Part II: Particulate Studies (2020) (2)
- Development of Laser Ignited Hydrogen Fueled Supercharged Engine (2017) (2)
- Introduction to Pollutants from Energy Sources: Characterization and Control (2018) (2)
- Introduction to Environmental, Chemical, and Medical Sensors (2018) (2)
- Laser Ignition Technology for Gaseous Fuelled Automotive Engines (2019) (2)
- LPG Spray Characteristics in a Multi-hole Injector for Gasoline Direct Injection (2014) (2)
- Optimization of the Parallel Diesel Hybrid Vehicle (2008) (2)
- Experimental Investigations of Gasoline HCCI Engine during Startup and Transients (2011) (2)
- Spray Characteristics of High Pressure Fan Spray Injector with Various Crossflow Speed (2005) (2)
- Material Compatibility Aspects and Development of Methanol-Fueled Engines (2019) (2)
- Emission and Combustion Characteristics of Biodiesel (Jatropha Curcas) Blends in a Medium Duty IDI Transportation Engine (2007) (2)
- Influence of the Electrical Parameters of the Ignition System on the Phases of Spark Ignition (2018) (2)
- Combustion Characteristics of Dimethyl Ether (DME) and Diesel Fuel Using a Common-rail Fuel Injection System (2004) (2)
- Laser Ignition of Engines - A Contribution to Environmental Protection and a Challenge to Laser Technology Invited Paper (2014) (2)
- Introduction to Engines and Fuels for Future Transport (2021) (2)
- Introduction to Engine Exhaust Particulates (2018) (2)
- Control strategy of mode transition between low-temperature combustion and conventional combustion in a light-duty diesel engine (2013) (2)
- Introduction of Measurement, Analysis and Remediation of Environmental Pollutants (2019) (2)
- Combustion Mode Switching Characteristics of a Medium-Duty Engine Operated in Compression Ignition / PCCI Combustion Modes (2018) (2)
- Performance of Prototype High Pressure Swirl Injector Nozzles for Gasoline Direct Injection (1999) (2)
- Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 4—Piston Rating, and Fuel Injection Equipment Issues (2021) (2)
- Development And Characterization Of Biodiesel From Non-Edible Vegetable Oils Of Indian Origin (2004) (2)
- Multiple fuel injection strategy for premixed charge compression ignition combustion engine using biodiesel blends (2022) (2)
- Electrification and Bio-energy Options in Rural India 165 PART II BIO-ENERGY OPTIONS AND RURAL INDIA (2014) (2)
- Correction to: Smartphone-assisted real-time estimation of chlorophyll and carotenoid concentrations and ratio using the inverse of red and green digital color features (2021) (2)
- Combustion and Emissions Characteristics of a Diesel Engine with the Variation of the HP/LP EGR Proportion (2014) (2)
- The Effects of Fuel Temperature on the Spray and Combustion Characteristics of a DISI Engine (2006) (2)
- Laser Ignition of Hydrogen-Air Mixture in a Combustion Bomb (2008) (2)
- Performance analysis of R22 DMF turbo absorption refrigeration system (1987) (2)
- Time-Resolved Endoscopic Evaluation of Spatial Temperature and Soot Distribution in a Butanol-Diesel Blend Fueled Direct Injection Compression Ignition Engine (2021) (2)
- Erratum: “Effect of Biodiesel Utilization of Wear of Vital Parts in Compression Ignition Engine” (ASME J. Appl. Mech., 2003, 70, pp. 604–611) (2003) (2)
- Effect of Injection Strategy on Hydrogen Direct-Injection Spark-Ignition Engine (2021) (2)
- Matching and Optimisation of Turbochargers for Upgradation of High Horse Power Diesel Electric Locomotives for Indian Railways (2005) (2)
- Hydrocarbon Emissions from a Gas Fueled SI Engine under Lean Burn Conditions (1999) (2)
- Effects of Pilot Injection on Low Temperature Diesel Combustion (2012) (2)
- I am a Teacher (2013) (2)
- The Effect of Triple Injection on Engine Performance and Emissions in a HSDI Diesel Engine (2004) (2)
- Nanomaterials and Nanocomposites for Environmental Remediation (2021) (2)
- Potential of DME and Methanol for Locomotive Traction in India: Opportunities, Technology Options and Challenges (2017) (2)
- Removal and mechanism analysis of NO emissions in carbon-free ammonia combustion systems with a secondary fuel injection (2023) (2)
- Experimental Investigation on the Performance and Emission Characteristics of Direct Injection Medium Duty Transport Diesel Engine Using Rice-Bran Oil Biodiesel (2007) (2)
- Experimental Investigation of the Effect of EGR on Wear Performance of a Compression Ignition Engine (2005) (2)
- Hydraulic Simulation and Experimental Analysis of Needle (2006) (2)
- Introduction to Solar Energy: Systems, Challenges, and Opportunities (2019) (2)
- Gasohol Sprays Simulations of a Multi-Hole GDI Injector in Engine-Like Conditions (2021) (2)
- Measurements of droplet size distribution and in-cylinder mixture formation from a slit injector in a direct-injection gasoline engine (2007) (2)
- Pollution Control Technologies: Current Status and Future Prospects (2021) (2)
- Characteristics of Nano-particle Emitted by Auto-ignited Engine with ULSD, Bio-diesel and DME Fuel and Effects of Oxidation Catalyst on Its Reduction (2009) (2)
- Lasers and Optical Diagnostics for Next Generation IC Engine Development: Ushering New Era of Engine Development (2017) (1)
- Field Results From a Linked Vertical Well UCG Test in Deep, Thin-Seam Bituminous Coal (1981) (1)
- Vulnerability of The Male Reproductive System to SARS-CoV-2 Invasion: Potential Role for The Endoplasmic Reticulum Chaperone Grp78/HSPA5/BiP (2022) (1)
- Gaseous and liquid fuels (2010) (1)
- Spray and Combustion Characteristics of n-dodecane in a Constant Volume Combustion Chamber for ECN Research (2014) (1)
- The Effects of Hydrogen on DME HCCI Combustion (2007) (1)
- Combustion Phenomena and Emissions in a Dual-Fuel Optical Engine Fueled with Diesel and Natural Gas (2021) (1)
- Tribological studies of epoxy and its composite coatings on steel in dry and lubricated sliding, (Tribology – Materials, Surfaces & Interfaces 2015 Vol. 9, No. 3, page 144–153) (2020) (1)
- Tribological Aspects of Automotive Engines (2019) (1)
- Effects of Turbocharger Rotation Inertia on Instantaneous Turbine Efficiency in a Turbocharged-Gasoline Direct Injection (T-GDI) Engine (2020) (1)
- The Effect of Multi-ignition Strategy on the Combustion and Emission Characteristics in a Ultra Lean Burn GDI Engine (2012) (1)
- Alcohols for Fueling Internal Combustion Engines (2018) (1)
- The Combustion of Liquefied Petroleum Gas in Stratified and Homogeneous Charge Compression Ignition Engine (2007) (1)
- Spray Chamber Designs and Optical Techniques for Fundamental Spray Investigations (2021) (1)
- Experimental Investigations of Engine Durability and Lubricating Oil Properties of Jatropha Oil Blends Fuelled DI Diesel Engine (2009) (1)
- Gasoline HCCI engine with DME (Di-methyl Ether) as an Ignition Promoter (2011) (1)
- Thermal effects during welding on SiC (1989) (1)
- Introduction of New Trends in Emerging Environmental Contaminants (2021) (1)
- Introduction to Clean Fuels for Mobility (2022) (1)
- In-situ coal gasification: a new technology (1982) (1)
- Effect of Injection Rate and Gas Density on Ambient Gas Entrainment of Non-evaporating Transient Diesel Spray from Common-Rail Injection System (2004) (1)
- Comparison of the effects of late intake valve closing (LIVC) strategy on engine performance between conventional diesel and di-methyl ether (DME) in a compression ignition engine (2015) (1)
- Introduction of Greener and Scalable E-Fuels for Decarbonization of Transport (2021) (1)
- Prospects of Dual-Fuel Injection System in Compression Ignition (CI) Engines Using Di-Methyl Ether (DME) (2021) (1)
- Effect of Nozzle Hole Geometry on Spray Characteristics of High Pressure Diesel Injection (2010) (1)
- Combustion diagnostics and pollutants (2010) (1)
- Advances in Applied Science and Technology Vol. 1 (2019) (1)
- LPG-DME Stratified Charge Compression Ignition Engine (2007) (1)
- Introduction to Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines (2019) (1)
- Effects of turbocharger rotational inertia on engine and turbine performance in a turbocharged gasoline direct injection engine under transient and steady conditions (2021) (1)
- Introduction to Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines (2021) (1)
- Effect of Biodiesel Utilization on Tribological Properties of Lubricating Oil in a Compression Ignition Engine (2014) (1)
- Stratified exhaust gas recirculation under lean operation of a liquefied petroleum gas spark-ignition engine with liquid phase injection (2007) (1)
- Application of JP-8 to Premixed Charge Ignition (PCI) Combustion in a Single-Cylinder Diesel Engine (2014) (1)
- Strategical Evolution of Clean Diesel Combustion (2021) (1)
- Generation of robust and well-atomized swirl spray (2007) (1)
- Liquid Atomization and Spray Characteristics in Electrostatic Spray of Twin Fluids (2001) (1)
- Friction, Wear, and Lubrication Studies of Alcohol-Fuelled Engines (2021) (1)
- Erratum Redux: “Effect of Biodiesel Utilization of Wear of Vital Parts in Compression Ignition Engine” [ASME J. Eng. Gas Turbines Power, 125, pp. 604–611] (2004) (1)
- Potential of Gasoline Compression Ignition Combustion for Heavy-Duty Applications in Internal Combustion Engines (2021) (1)
- Optical Diagnostics for Gasoline Direct Injection Engines (2021) (1)
- Hydrological classification and performance of Himalayan springs in climate change scenario – a case study (2020) (1)
- Effect of Valve Lift and Timing on Internal Exhaust Gas Recirculation and Combustion in DME Homogeneous Charge Compression Ignition Engine (2009) (1)
- Intermodal and Intelligent Transportation Systems for Indian Transport Sector (2020) (1)
- Effect of Nitrogen and Carbon Dioxide on DME Homogeneous Charge Compression Ignition Engine (2008) (1)
- Operating Characteristics of DME-Gasoline Dual-fuel in a Compression Ignition Engine at the Low Load Condition (2013) (1)
- Effects of cylinder head temperature and coolant velocity on the erosion behavior of water jacket in a diesel engine (2015) (1)
- Effects of Nozzle Orifice Diameter and Hole Number on Diesel Combustion and Engine Performance (2022) (1)
- The Effects of Split-Injection and EGR on the Combustion Characteristics of a DISI Engine: 직접분사식 가솔린 엔진에서 분할분사 및 배기가스 재순환의 효과 (2006) (1)
- Effect of hydrogen and DME injection in homogeneous charge compression ignition engine with DME second injection strategy (2012) (1)
- Spray Charateristics of High-Pressure Injectors for HSDI Diesel Engines (1999) (1)
- Optical Measurements of Water Droplet Characteristics in Turbulent Gasoline Pipe Flow (2001) (1)
- Horizons in Internal Combustion Research (2018) (1)
- Evaluation of Lanthanum Based Diesel Oxidation Catalyst for Emission Reduction with and without Ceria Support (2016) (1)
- Compressed Natural Gas Utilization in Dual-Fuel Internal Combustion Engines (2021) (1)
- I205 FUEL-SPRAY CHARACTERISTICS OF HIGH PRESSURE GASOLINE INJECTION IN FLOWING FIELDS(Engine spray) (2000) (1)
- Spatio-temporally Resolved Emission Spectroscopy of Inductive Spark Ignition in Atmospheric Air Condition (2018) (1)
- Assessment of JP-8 and Diesel in Direct Injection Diesel Engine (2008) (1)
- Dual-fuel HCCI operation with DME/LPG/gasoline/hydrogen (2009) (1)
- Regulated and Unregulated Emissions from Methanol Fuelled Engines (2021) (1)
- Corrigendum to “Comparative investigations of flame kernel development in a laser ignited hydrogen–air mixture and methane–air mixture” [Int J Hydrogen Energy 38 (2013) 10648–10653] (2013) (1)
- Knocking and Combustion Characteristics at Rich Limit of Gasoline HCCI Engine (2006) (1)
- Laser-Ignited Engine Development for Adaptation to Hydrogen-Enriched Compressed Natural Gas (HCNG) (2018) (1)
- DESIGN IMPROVEMENTS IN THE FURNACE OF KHANDSARI (COTTAGE SUGAR INDUSTRY) FOR AIR POLLUTION PREVENTION AND CONTROL (2006) (1)
- Experimental Evaluation of the Effects of Straight Vegetable Oil, and Blends on the Deposits and Wear of the Fuel Injection Equipment (2012) (1)
- Particulate Emission Reduction by Fuel Injection Timing Optimization in a Gasoline Direct Injection Engine (2021) (1)
- Comparative Study of PM Mass and Chemical Composition from Diesel and Biodiesel Fuelled CRDI SUV Engine (2012) (1)
- Effect of Induced Voltage on Spray Characteristics of Piezo Actuated Diesel Injector (2010) (1)
- Operating Characteristics of Dual-fuel Combustion with DME and Gasoline in a Compression Ignition Engine (2014) (1)
- Process improvements in Khandsari (cottage sugar industry) in India (2004) (1)
- Artificial neural network rainfall-runoff modelling in varying domain (2002) (1)
- Diesel Injection Strategy in a Premixed Charge Compression Ignition Engine Under a Low Load (2018) (1)
- Injection strategy of DME in a DICI Engine (2007) (1)
- Flame Propagation Characteristics of Propane-Air Premixed Mixtures (1996) (1)
- Selection of Suitable Indicators from Comparison of Colour Transformation in Terms of Index of Molar Colour Discrimination (1984) (1)
- Spray characteristics of liquid phase LPG injection for port fuel injection S.I. Engine (2001) (1)
- Improving Efficiency of Diesel Traction and Adoption of Liquid Sunshine for Indian Railways (2018) (1)
- The Effect of EGR on the Combustion in a High Speed Direct-Injection Diesel Engine (1998) (1)
- Effect of injection strategies for noise reduction during low temperature combustion-conventional diesel combustion mode transition in a heavy duty diesel engine (2015) (1)
- System Analysis of the Diesel Parallel Hybrid Vehicle Powertrain (2007) (1)
- Challenges and Opportunities of Particle Imaging Velocimetry as a Tool for Internal Combustion Engine Diagnostics (2021) (1)
- Dimethyl Ether Spray Characteristics for Compression Ignition Engines (2021) (1)
- The Combined Effect of Multi-hole Injector with Pilot Injection and EGR in a HSDI Diesel Engine (2004) (1)
- Development of Methanol Fuelled Two-Wheeler for Sustainable Mobility (2019) (1)
- Structure and Mass Flux Distribution of a Side-opened Hollow Cone Spray Generated by Swirl Pressure Atomizers (2007) (0)
- The Effects of Intake Valve Closing Timing on Engine Performance and Emissions in a DME Compression Ignition Engine at Low Load Cold Start Condition (2013) (0)
- Effect of Exhaust Gas Recirculation on physiochemical characteristics of Diesel Soot (2017) (0)
- Introduction to Application of Clean Fuels in Combustion Engines (2022) (0)
- Introduction to the Locomotives and Rail Road Transportation (2017) (0)
- The Effect of Injection Location of DME and LPG HCCI Engine (2009) (0)
- Safety Aspects of Methanol as Fuel (2021) (0)
- Partially premixed combustion of diesel-di-ethyl ether blends in light-duty commercial engine (2023) (0)
- Combustion, performance and emissions characteristics of a newly developed CRDI single cylinder diesel engine (2015) (0)
- Evaluation of Steel Cap Piston for Upgradation of Diesel Electric Locomotives for Indian Railways (2005) (0)
- Introduction to New Research Directions in Solar Energy Technologies (2021) (0)
- Correction to: Smartphone-assisted real-time estimation of chlorophyll and carotenoid concentrations and ratio using the inverse of red and green digital color features (2021) (0)
- Management of Rash in the Setting of a Triple Combination Cystic Fibrosis Transmembrane Regulator Modulator (2023) (0)
- DME injection Strategies in a Hydrogen Compression Ignition Engine (2010) (0)
- Effect of Injection Strategy on Diesel Combustion Stability in Transient Condition (2013) (0)
- Spray Breakup Modelling for Internal Combustion Engines (2021) (0)
- Instrumentation used for the monitoring and controlling of the Pricetown I underground coal gasification field test (1980) (0)
- Effect of Laser-Induced Plasma to Gaseous Flow (2019) (0)
- Soot reduction of a downsizing-concept 1.6l turbocharged gasoline direct-injection prototype engine (2010) (0)
- Cyclophosphamide-Induced Late Onset Pulmonary Fibrosis in Pediatric Patient (0)
- Understanding hydrogen jet dynamics for direct injection hydrogen engines (2023) (0)
- Measurement devices for piston assembly friction and oil film thickness (1999) (0)
- Bio Inspired Managerial Insights for a Flexible and Efficient Organization: A SAP–LAP Analysis (2014) (0)
- Review of Life Cycle Analysis Studies of Less Processed Fuel for Gasoline Compression Ignition Engines (2022) (0)
- Bidirectional transfer learning model for sentiment analysis of natural language (2021) (0)
- Introduction to Engine Modeling and Simulation (2021) (0)
- Influence of Piston Bowl Geometry on Combustion of a Diesel/CNG Reactivity Controlled Compression Ignition Engine (2021) (0)
- The Static Pressure Distribution and Flow Characteristics Inside the High-Pressure Swirl Spray (2006) (0)
- Suitability Assessment of an Indigenous Heterogeneous Thoracic Phantom for Patient-Specific Quality Assurance in Radiotherapy. (2021) (0)
- Case of Persistent Wheeze and Atelectasis in an Adolescent Male (2023) (0)
- Characterization of mixture distribution and combustion in a DISI optical engine under late injection mode (2002) (0)
- Soot and NOx Modelling for Diesel Engines (2021) (0)
- Portable power generating device, Device for supplying with fuel and air for the portable power generating device, micromotor with uniflow scavenging for the portable power generating device and its operating method (2007) (0)
- Entropy optimized semi-supervised decomposed vector-quantized variational autoencoder model based on transfer learning for multiclass text classification and generation (2021) (0)
- Dimethyl Ether ( DME ) Spray Characteristics in Common-Rail High Pressure Injection System (2006) (0)
- Endometrial carcinoma in a 22‐year‐old virgin (1999) (0)
- Introduction to Advances in Engine Tribology (2021) (0)
- Introduction of Methanol: A Sustainable Transport Fuel for CI Engines (2021) (0)
- SERIES 2002-01-2898 Dimethyl Ether ( DME ) Spray Characteristics Compared to Diesel in a Common-Rail Fuel Injection System (2002) (0)
- A Seven-Layer Model for Standardising AI Fairness Assessment (2022) (0)
- A Unique Case of Pediatric Plastic Bronchitis (2022) (0)
- Combustion Control through the DME Injection Timing in the Hydrogen-DME Partially Premixed Compression Ignition Engine (2013) (0)
- Smartphone-assisted real-time estimation of chlorophyll and carotenoid concentrations and ratio using the inverse of red and green digital color features (2021) (0)
- Measurement and Analysis of Liquid Film Thickness of Pressure-Swirl Spray for Direct-Injection Gasoline-Engines (2007) (0)
- Potential to Reduce Nano-Particle Emission in SG-DISI Engine with Normal Butane (2019) (0)
- Mass balance results for the Pricetown I underground coal gasification field test (1981) (0)
- Effects of the surface temperature and the coolang velocity on the erosion behavior of water jacket in a diesel engine (2013) (0)
- Understanding Pollutant Emission in a Heavy-Duty Diesel Engine with JP-8 and Diesel (2011) (0)
- Top-Feed Type Port Fuel Injector for Liquefied Petroleum Gas Liquid Phase Injection (2007) (0)
- Princetown I data analysis (1980) (0)
- Knock Characteristic Analysis of Gasoline and LPG Homogeneous Charge Compression Ignition Engine (2007) (0)
- Radiological Features of Thyroid Eye Disease (TED) (2020) (0)
- Combustion Phasing in DME-fuelled HCCI Engine (2006) (0)
- The role of moderate leukocytospermia in infertile men (2013) (0)
- Introduction to Advanced Combustion for Sustainable Transport (2021) (0)
- A TISM Based Bionic Model of Organizational Excellence (2015) (0)
- Investigation of Combustion Process and Emission Characteristics of CNG/Diesel Dual-Fuel PCCI Combustion in a 1.0 Liter Optical CI Engine (2021) (0)
- Comparison of Macroscopic Spray Characteristics of Dimethyl Ether with Diesel (2002) (0)
- Emission Reduction by Multiple Injection Strategy in a Direct-Injection Diesel Engine (2008) (0)
- Schlieren, Shadowgraph, Mie-scattering visualization of diesel and gasoline sprays in high pressure/high temperature chamber under GDCI engine low load condition (2017) (0)
- Postvasectomy reversal semen analysis: a predictor of pregnancy (2016) (0)
- Acute Pulmonary Eosinophilia Following Pediatric SARS CoV 2 Infection (2022) (0)
- Spray and Flame Characteristics of Waste Cooking Oil Biodiesel and Diesel in a Compression Ignition Diesel Engine Using In-cylinder Visualization (2014) (0)
- Air quality and the environmental effects from an underground coal-gasification test (1981) (0)
- Spray Penetrations of Dimethyl Ether (DME) and Diesel for the Variation of Injection Rate (2004) (0)
- Mass Balance Results for Pricetown I Underground Coal Gasification (1979) (0)
- Pricetown I underground coal gasification field test: operations report (1981) (0)
- Prioritising the determinants of Industry-4.0 for implementation in MSME in the post-pandemic period – a quality function deployment analysis (2022) (0)
- Waste Heat Recovery Potential from Internal Combustion Engines Using Organic Rankine Cycle (2021) (0)
- Bioconjugation and Characterization of Fe 3 O 4 Magnetic Nanoparticles for Immunoassay Application (2012) (0)
- Introduction to Alcohol as an Alternative Fuel for Internal Combustion Engines (2021) (0)
- Influence of Fuel Injection Pressure on Spray Characteristics of Diesel-Diethyl Ether Blends for Diesel Engine Applications: An Experimental Study (2023) (0)
- Characteristics of Water Droplets in Gasoline Pipe Flow (2001) (0)
- The Hot Re-start Characteristics of Top-Feed Type Injector for Liquefied Petroleum Gas Liquid Phase Injection Engine (2008) (0)
- Multi-Stage Turbocharger Gasoline IC Engine Simulation for HALE UAV (2019) (0)
- Combustion and Spray Characteristics of Diesel and Gasoline in Heavy-duty Compression Ignition Engine Under Low Load Condition (2020) (0)
- Gasoline compression ignition (GCI) combustion in a light-duty engine using double injection strategy (2023) (0)
- Combustion Characteristics of Gasoline HCCI Engine with DME as an Ignition Promoter (2005) (0)
- Characterisation of particulates and trace metals emitted by a dimethyl ether-fuelled genset engine prototype. (2023) (0)
- Effect of Multiple Injection on Emission and Combustion Characteristics in Heavy-Duty Diesel Engine (2008) (0)
- Methanol/ Ethanol/ Butanol-Gasoline Blends Use in Transportation Engine-Part 1: Combustion, Emissions, and Performance Study (2022) (0)
- Improvement of Flame Kernel Growth by Microwave-Assisted Plasma Ignition (2019) (0)
- 2-Dimensional Visualization of the Flame Propagation in a Four-Valve Spark-Ignition Engine (1996) (0)
- Preliminary Investigation Into Comparative Performance of Titanium Based Coatings for Automotive Applications Using Biodiesel Blend and Diesel (2006) (0)
- Introduction to Advanced Engine Diagnostics (2018) (0)
- The Fuel Economy Improvement through the Knock Margin Expansion in a Turbocharged Gasoline Direct Injection Engine (2018) (0)
- Measurement Methods of Thermofluids Phenomena in Internal Combustion Engine : Reciprocating Engines and Gas Turbines (1994) (0)
- Methanol/ Ethanol/ Butanol-Gasoline Blends Use in Transportation Engine-Part 2: Composition, Morphology and Characteristics of Particulates (2022) (0)
- Scope and limitations of utilization of non-edible straight vegetable oils (SVO’s) as a substitute fuel for diesel engines: an experimental study (2014) (0)
- Effect of Ultra-high Injection Pressure on Combustion and Emission Characteristics in a Single-cylinder Diesel Engine (2015) (0)
- Emissions and Combustion Characteristics of LPG HCCI Engine (2006) (0)
- Numerical Simulation of Methane Slip in Dual Fuel Marine Engines (2017) (0)
- 研究所紹介 Combustion Research in Korea Advanced Institute of Science and Technology (2000) (0)
- SERIES 1999-01-1533 Gas Flows Through the InterRing Crevice and Their Influence on UHC Emissions (1999) (0)
- Spatially-Resolved Time Series of Reactive Species in Atmospheric-Pressure Inductive Spark Discharge (2018) (0)
- The Initial Film Flow Development of the High-Pressure Swirl Spray (2006) (0)
- Effect of late intake valve closing on the particle number emissions of a turbocharged gasoline direct injection engine (2022) (0)
- The Effects of Intake Port Design on Flame Propagation in a Lean Burn Spark-Ignition Engine (1997) (0)
- Effects of intake valve closing timings and fuel injection strategies on the combustion characteristics in compression ignition engines (2015) (0)
- Effect of Inlet Temperature and CO2Concentration in the Fresh Charge on Combustion in a Homogeneous Charge Compression Ignition Engine Fuelled with Dimethyl Ether (2007) (0)
- Effect of Straight Vegetable Oil Utilization on Carbon Deposits and Wear of CI Engine Components (2014) (0)
- Characterisation of Mixture Distribution in a DISI Optical Engine under Late Injection Mode (2002) (0)
- Improvement of Combustion in a Diesel-Natural Gas DF-PCCI Engine by Diesel Two-stage Injection (2021) (0)
- Correlation between Ignition Characteristics and Flame Propagation in a Constant Volume Combustion Chamber (1992) (0)
- Di-methyl Ether Homogeneous Charge Compression Ignition Engine with Gasoline Port Injection (2006) (0)
- I203 EXAMINATION OF THE SPRAY BEHAVIOR AT THE FINAL STAGE OF DIESEL INJECTION(Engine spray) (2000) (0)
- Introduction to Combustion Simulations and Optical Diagnostic Techniques for Internal Combustion Engines (2019) (0)
- Influence of Microwave Ejection on Flame Formation and Development in a Constant Volume Combustion Chamber (2017) (0)
- Computational Investigations of Spray Atomisation and Evaporation under Cold-Start Conditions of a Diesel Engine (2022) (0)
- Effect of pilot injection strategy on the methanol-mineral diesel fueled reactivity controlled compression ignition combustion engine (2023) (0)
- Experimental Evaluation of Light-Duty Gasoline Compression Ignition (GCI) Engine (2020) (0)
- Title : Dimethyl Ether ( DME ) Spray Characteristics in a Common-rail Fuel Injection System (2004) (0)
- Examination of the Spray Behavior at the Final Stage of Diesel Injection (2000) (0)
- SI2-2 Effects of the injection timing on spray and combustion characteristics in a spray-guided DISI engine under the lean-stratified operation(SI: Spark-Ignition Engine Combustion,General Session Papers) (2012) (0)
- DME Combustion Control in Common-rail Engines by Pilot Injection (2008) (0)
- The Effect of Natural Gas Substitution Ratio and Diesel Injection Timing on Accuracy of In-cylinder Pressure Prediction DNN Model from Vibration Signal in a CNG-Diesel Dual-Fuel Engine (2021) (0)
- Title: The application of diesel-fueled HCCI combustion in an automotive-size single-cylinder diesel engine (2006) (0)
- Technological Evolution of Spark Ignition Direct Injection Engine (2018) (0)
- Effects of EGR and DME Injection Strategy in Hydrogen-DME Compression Ignition Engine (2011) (0)
- Experimental Investigations on Effect of Karanja Biodiesel on Engine Performance, Combustion and Durability in Collaboration with Shell Technology India Private Limited (2014) (0)
- Comparison of Combustion and Emission Characteristics of Propane and n-butane in a Stratified DISI Engine (2014) (0)
- Design and Development of a Portable Disinfectant Device (2020) (0)
- Thank you to reviewers (2016) (0)
- For an alternative development. Balanced economic growth will be impossible without environmental protection. (1982) (0)
- Dimethyl ether (DME) Spray Characteristics in Common-Rail High Pressure Injection Equipments (2002) (0)
- The Droplet Size Distribution of Fan Spray at Different Surrounding Conditions (2007) (0)
- Introduction to Combustion for Power Generation and Transportation (2017) (0)
- Experimental Study on the Preferential Diffussion Effect in Near Limit Laminar Premixed Flame (2001) (0)
- Liquefied Petroleum Gas and Dimethyl Ether Compression Ignition Engine (2007) (0)
- Characterization of Biodiesel Sprays (2018) (0)
- Low Temperature Diesel Combustion with Pilot Injection (2008) (0)
- Image-Based Flame Temperature and Soot Analysis of Biofuel Spray Combustion (2018) (0)
- LPG-DME Compression Ignition Engine with Intake Variable Valve Timing (2008) (0)
- Comparison of spray structures of diesel and gasoline in a compression ignition engine using modified evaporation model in OpenFOAM CFD package (2013) (0)
- Combustion Instabilities and Control in Compression Ignition, Low-Temperature Combustion, and Gasoline Compression Ignition Engines (2022) (0)
- List of Reviewers: October 2010 to September 2011 (2011) (0)
- Improvements of Thermal and Combustion Efficiencies by Modifying a Piston Geometry in a Diesel/Natural Gas RCCI Engine (2023) (0)
- The Effect of Training Conditions on the Accuracy of In-cylinder Pressure Prediction DNN Model Using Engine Block Vibration in a CNG-Diesel Dual Fuel Engine (2021) (0)
- Introduction (2019) (0)
- The Effects of Injection Methods and EGR on Combustion and Emission Characteristics of a Single Cylinder DISI Engine (2005) (0)
- The Effects of Injector and Swirler on the Flame Stability in a Model Combustor (1998) (0)
- Development of Autonomous Advanced Disinfection Tunnel to Tackle External Surface Disinfection of COVID-19 Virus in Public Places (2020) (0)
- Introduction to Advanced Combustion Technologies: The Role of Natural Gas in Future Transportation and Power Generation Systems (2018) (0)
- The Frequency Variation Study Influenced by Spark Timing and Equivalence Ratio in a 2-Stroke Linear Engine (2009) (0)
- Near-Nozzle Liquid Flow and Spray Characteristics of DISI Swirl Injectors (2005) (0)
- Instrumentation for optimizing an underground coal-gasification process (1982) (0)
- Determination of instantaneous unit hydrograph for Himalayan watershed (1987) (0)
- EXPERIMENTAL INVESTIGATIONS OF A SIGNLE CYLINDER GENSET ENGINE WITH COMMON RAIL FUEL INJECTION SYSTEM (2014) (0)
- Comprehensive CFD Modeling of Diesel Sprays Including Secondary Atomization under High Weber Numbers (2006) (0)
- Review of Regulated, Unregulated and Particulate Emissions from Biodiesel Fuelled Compression Ignition Engines (2022) (0)
- The application of diesel-fueled HCCI combustion in an automotive-size single-cylinder diesel engine (2006) (0)
- Prediction of employee attrition in organisations using Garrett ranking and logistic regression (2020) (0)
- Instrumentation for real-time data analysis and control of synthetic-fuel technologies (1981) (0)
- Radial Basis Function Neural Networks for Rainfall-Runoff Modeling (2014) (0)
- Review of morphological and chemical characteristics of particulates from compression ignition engines (2022) (0)
- UV/ozone induced oxidation of silicon(1-x) germanium(x) alloys and thermal desorption of the oxide film (1994) (0)
- Introduction to Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction (2021) (0)
- Fundamentals and safety (2010) (0)
- The Influence of Swirl Ratio and Injection Pressure on Low-Temperature Diesel Combustion and Emissions (2006) (0)
- The Gasoline Spray Characteristics of Tapered Nozzle for a Swirl Injector (2007) (0)
- Effects of Injection Strategy on Diesel Combustion (2005) (0)
- Optical and computational investigations of the effect of Spray-Swirl interactions on autoignition and soot formation in a compression ignition engine fuelled by Diesel, dieseline and diesohol (2022) (0)
- Unsteady flow between two parallel canals at finite distance in a heterogeneous aquifer (1988) (0)
- Review of Regulated, Unregulated and Particulate Emissions from Biodiesel Fuelled Compression Ignition Engines (2022) (0)
- Experimental and Numerical Investigations of Jet Impingement Cooling of Flat Plate for Controlling the Non-Tail Pipe Emissions From Heavy Duty Diesel Engines (2006) (0)
- Biodiesel as an Alternate Fuel for Diesel Traction on Indian Railways (2017) (0)
- Knock Characteristics in LPG-DME and Gasoline-DME Homogeneous Charge Compression Ignition Engines (2007) (0)
- Conceptual Design of a Body Bag for Preventing Infections and Safe Disposal of Deceased from COVID-19 Virus (2020) (0)
- Microscopic Spray Investigation of Karanja Biodiesel and Its Effects on Engine Perfor- mance and Emissions (2018) (0)
- The Gasoline Atomization Characteristics and Static Pressure Distribution of Tapered Nozzle Swirl Spray (2007) (0)
- Discharge characteristics of corona ignition System under atmospheric air condition (2016) (0)
- Dosimetric Evaluation of the Treatment Plan on Indigenous Heterogeneous Phantoms using Analytical Anisotropic Algorithm and Acuros-XB Algorithm for Different Photon Energies (2022) (0)
- Effects of Nozzle Orifice Diameter and Hole Number on Diesel Combustion and Engine Performance (2022) (0)
- Effect of Injector Configuration on Combustion and Exhaust Emission in Direct Injection Compression Ignition Engine Fueled with Gasoline and Diesel at Idle and Low Load Operation (2012) (0)
- On the Impact of a Solar Eclipse across 100 PV Systems in India and Southeast Asia (2020) (0)
- Catalytic Control Options for Diesel Particulate Emissions Including that from Locomotive Engines (2017) (0)
- Fuel Sprays for Direct Injection Engines (2000) (0)
- Effect of the Injector Configuration on the HCCI Combustion in a Heavy Duty Diesel Engine (2009) (0)
- Evolution of Catalytic Converters for Spark Ignition Engines to Control Emissions (2021) (0)
- Combined Effect of Fuel Compensation and Injection Timing on Low Temperature - Conventional Combustion Mode Transition (2014) (0)
- Characterization of Biodiesel Sprays (2018) (0)
- Guest Editorial: Alternative Fuels (2007) (0)
- Technology Options for Methanol Utilization in Large Bore Diesel Engines of Railroad Sector (2021) (0)
- Introduction of Potential and Challenges of Low Carbon Fuels for Sustainable Transport (2022) (0)
- Image-Based Flame Temperature and Soot Analysis of Biofuel Spray Combustion (2018) (0)
- ECU Calibration for Methanol Fuelled Spark Ignition Engines (2021) (0)
- Utilization of Biodiesel for Rail Traction on Indian Railways A (2006) (0)
- Genetic programming approach on evaporation losses and its effect on possible future climate change for Pilavakkal reservoir scheme (2009) (0)
- Characteristics of Transient Performance in a Turbocharged GDI Engine with TiAl Turbine (2015) (0)
- Experimental and Computational Investigation of Diesel and Gasoline Injection in a Direct Injection Compression Ignition Engine (2020) (0)
- Fuel Stratification Effects of LPG-DME Compression Ignition Engine (2008) (0)
- Combustion and Emission Characteristics of n-butane with Enhanced Tumble Flow Under Lean Stratified Conditions (2019) (0)
- Comparison of Primary and Secondary Emissions from an Internal Combustion Engine (2014) (0)
- Spray Behavior of a GDI Injector at Constant Fuel Injection Pressure and Varying Engine Load (2018) (0)
- Fundamentals, Evolution, and Modeling of Ignition Systems for Spark Ignition Engines (2021) (0)
- Combustion Characteristics of Methanol Fuelled Compression Ignition Engines (2021) (0)
- Application of Steam Injection in De-activated Cylinder for Exhaust Waste Heat Recovery (2017) (0)
- Combustion in Diesel Fuelled Partially Premixed Compression Ignition Engines (2021) (0)
- A clinicopathological study of breast dysplasia with special reference to cellular enzymatic activity. (1975) (0)
- Effect of Pintle Lift on Spray Characteristic of Piezo Actuated Outward-opening Injector for Direct-Injection Spark-Ignition Engine (2010) (0)
- Static Pressure Distribution inside the Pressure-Swirl Spray (2006) (0)
- Potential of Di-Ethyl Ether in Reducing Emissions from Heavy-Duty Tractors (2023) (0)
- Comparisons of Engine Performances on Advanced Combustion Technologies in a Heavy Duty Diesel Engine (2018) (0)
- Compression Ignition Engine Fuelled with Liquefied Petroleum Gas and Di-methyl Ether (2007) (0)
- Macroscopic spray characteristics and internal structure studies of natural gas injection (2022) (0)
- Benign tumours of the breast with special reference to cellular enzymatic activity. (1976) (0)
- Dimethyl ether fuel injection system development for a compression ignition engine for increasing the thermal efficiency and reducing emissions (2023) (0)
- Application of Laser-Induced Fluorescence Technique in Internal Combustion Engine Investigations (2021) (0)
- Erratum to: Droplet and Spray Transport: Paradigms and Applications (2018) (0)
- Method of Decreasing the Deviation of Corrected Engine Torque using Knock Correction Rate in Gasoline Engine Performance Test on Dynamometer (2008) (0)
- Schlieren, Shadowgraph, Mie-scattering Visualization of Diesel and Gasoline Sprays under GDCI Engine Low Load Condition (2015) (0)
- Combustion process and PM emission characteristics in a stratified DISI engine under low load condition (2013) (0)
- Diesel Combustion Strategy and Its Extension (2003) (0)
- Introduction to Application Paradigms of Droplets and Spray Transport (2018) (0)
This paper list is powered by the following services:
Other Resources About Avinash Kumar Agarwal
What Schools Are Affiliated With Avinash Kumar Agarwal?
Avinash Kumar Agarwal is affiliated with the following schools:
