Budugur Lakshminarayana

Budugur Lakshminarayana's AcademicInfluence.com Rankings

Engineering

#7449

World Rank

#8824

Historical Rank

Mechanical Engineering

#747

World Rank

#801

Historical Rank

Applied Physics

#2588

World Rank

#2629

Historical Rank

engineering Degrees

Download Badge

Engineering

Why Is Budugur Lakshminarayana Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Budugur Lakshminarayana's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachinery (1970) (177)
Turbulence modeling for complex shear flows (1985) (168)
The structure of tip clearance flow in axial flow compressors (1995) (125)
An Assessment of Computational Fluid Dynamic Techniques in the Analysis and Design of Turbomachinery—The 1990 Freeman Scholar Lecture (1991) (114)
Low-Reynolds-number k-epsilon model for unsteady turbulent boundary-layer flows (1993) (103)
Numerical Simulation of Tip Leakage Flows in Axial Flow Turbines, With Emphasis on Flow Physics: Part I—Effect of Tip Clearance Height (2001) (87)
Fluid Dynamics and Heat Transfer of Turbomachinery: Lakshminarayana/Fluid Dynamics and Heat Transfer of Turbomachinery (2007) (77)
Tip clearance effects in a turbine rotor : Part I : Pressure field and loss (2001) (73)
Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part I — Quasi-Steady Flow Field and Comparison With Steady-State Data (1989) (63)
Numerical Simulation of Tip Leakage Flows in Axial Flow Turbines, With Emphasis on Flow Physics: Part II—Effect of Outer Casing Relative Motion (2001) (56)
Mean velocity and decay characteristics of the guidevane and stator blade wake of an axial flow compressor (1980) (53)
Prediction of Strongly Curved Turbulent Duct Flows with Reynolds Stress Model (1997) (52)
Techniques for aerodynamic and turbulence measurements in turbomachinery rotors (1981) (51)
Unsteady Flow Field Due to Nozzle Wake Interaction With the Rotor in an Axial Flow Turbine: Part I—Rotor Passage Flow Field (1997) (48)
Stability of explicit navier-stokes procedures using k-ε and k - ε/algebraic reynolds stress turbulence models (1992) (44)
Three dimensional characteristics of turbulent wakes behind rotors of axial flow turbomachinery (1976) (44)
Fluid dynamics of inducers - A review (1982) (43)
Three-Dimensional Flow Field in the Tip Region of a Compressor Rotor Passage—Part I: Mean Velocity Profiles and Annulus Wall Boundary Layer (1982) (43)
Three-Dimensional Flow Field in the Tip Region of a Compressor Rotor Passage—Part II: Turbulence Properties (1982) (43)
Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading (1980) (42)
Three-Dimensional Navier–Stokes Computation of Turbomachinery Flows Using an Explicit Numerical Procedure and a Coupled k–ε Turbulence Model (1992) (41)
Explicit Navier-Stokes computation of cascade flows using the k-epsilon turbulence model (1992) (39)
Numerical simulation and aerothermal physics of leading edge film cooling (1998) (38)
Numerical Simulation of Tip Clearance Effects in Turbomachinery (1993) (37)
Characteristics of the Near Wake of a Compressor of a Fan Rotor Blade (1979) (37)
Wall Stall in Compressor Cascades (1966) (36)
Investigation of Three-Dimensional Flowfield at the Exit of a Turbine Nozzle (1995) (35)
Navier-Stokes Analysis of the Pump Flow Field of an Automotive Torque Converter (1995) (34)
Conventional Probes for the Relative Flow Measurement in a Turbomachinery Rotor Blade Passage (1981) (31)
Turbulence Characteristics in the Near Wake of a Compressor Rotor Blade (1979) (30)
Measurement and analysis of static pressure field in a torque converter pump (1995) (30)
A Method of Measuring Three-Dimensional Rotating Wakes Behind Turbomachinery Rotors (1974) (30)
Analysis of Turbulent Boundary Layer on Cascade and Rotor Blades of Turbomachinery (1981) (30)
Effects of Inlet Temperature Gradients on Turbomachinery Performance (1975) (29)
Steady and Unsteady Flow Field at Pump and Turbine Exits of a Torque Converter (1998) (29)
Investigation of the Tip Clearance Flow Inside and at the Exit of a Compressor Rotor Passage—Part I: Mean Velocity Field (1983) (27)
Computational Modeling of Three-Dimensional Endwall Flow Through a Turbine Rotor Cascade With Strong Secondary Flows (1994) (27)
Analysis of Streamline Curvature Effects on Wall-Bounded Turbulent Flows (1996) (25)
Turbulence Modeling and Computation of Viscous Transitional Flows for Low Pressure Turbines (1999) (24)
Computation of three-dimensional turbulent shear flows in corners (1983) (24)
Computation of Unsteady Viscous Flow Through Turbomachinery Blade Row due to Upstream Rotor Wakes (1993) (24)
Three-Dimensional Flowfield Downstream of an Axial-Flow Turbine Rotor (1999) (23)
Design, Development, and Performance of a Turbine Research Facility to Study Rotor Stator Interaction Effects (1996) (23)
An Axial Flow Research Compressor Facility Designed for Flow Measurement in Rotor Passages (1980) (23)
End-Wall and Profile Losses in a Low-Speed Axial Flow Compressor Rotor (1985) (22)
A space-marching method for viscous incompressible internal flows (1986) (22)
Noise Due to Interaction of Boundary-Layer Turbulence with a Compressor Rotor (1978) (20)
Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part 2—Unsteady Flow and Pressure Field (1990) (20)
Turbulence modeling for three-dimensional shear flows over curved rotating bodies (1984) (20)
Effects of Rotation and Blade Incidence on Properties of Turbomachinery Rotor Wake (1981) (20)
Unsteady Total Pressure Field Downstream of an Embedded Stator in a Multistage Axial Flow Compressor (1997) (20)
Aspirating Probe Measurements of the Unsteady Total Temperature Field Downstream of an Embedded Stator in a Multistage Axial Flow Compressor (1996) (19)
Investigation of Tip Clearance Phenomena in an Axial Compressor Cascade Using Euler and Navier–Stokes Procedures (1993) (19)
Prediction of cascade performance using an incompressible Navier-Stokes technique (1990) (19)
Structure and decay characteristics of turbulence in the near- and far-wake of a moderately loaded compressor rotor-blade (1981) (18)
Turbulent boundary layer on a rotating helical blade (1972) (18)
An Experimental Investigation of Steady and Unsteady Flow Field in an Axial Flow Turbine (1997) (18)
Steady and Unsteady Three-Dimensional Flow Field Downstream of an Embedded Stator in a Multistage Axial Flow Compressor: Part 1 — Unsteady Velocity Field (1998) (18)
TIME ACCURATE EULER SIMULATION OF INTERACTION OF NOZZLE WAKE AND SECONDARY FLOW WITH ROTOR BLADE IN AN AXIAL TURBINE STAGE USING NONREFLECTING BOUNDARY CONDITIONS (1995) (18)
Computation and Simulation of Wake-Generated Unsteady Pressure and Boundary Layers in Cascades: Part 1—Description of the Approach and Validation (1996) (18)
Methods for Desensitizing Tip Clearance Effects in Turbines (2001) (18)
Mean Velocity and Decay Characteristics of the Near- and Far-Wake of a Compressor Rotor Blade of Moderate Loading (1979) (17)
Experimental Investigation of Steady and Unsteady Flow Field Downstream of an Automotive Torque Converter Turbine and Inside the Stator: Part I — Flow at the Exit of Turbine (1995) (17)
Perspective: Fluid Dynamics and Performance of Automotive Torque Converters: An Assessment (1996) (16)
Investigation of three-dimensional flow field in a turbine including rotor/stator interaction. I - Design development and performance of the research facility (1992) (16)
Unsteady Flow Field due to Nozzle Wake Interaction With the Rotor in an Axial Flow Turbine: Part II — Rotor Exit Flow Field (1995) (16)
Experimental and Numerical Investigation of Stator Exit Flow Field of an Automotive Torque Converter (1994) (16)
An Experimental Study of the Compressor Rotor Blade Boundary Layer (1985) (16)
Interaction of Compressor Rotor Blade Wake With Wall Boundary Layer/Vortex in the End-Wall Region (1982) (16)
Computation of rotating turbulent flow with an algebraic Reynolds stress model (1987) (14)
An Experimental Study of Three-Dimensional Turbulent Boundary Layer and Turbulence Characteristics Inside a Turbomachinery Rotor Passage (1978) (14)
A method of measuring the three-dimensional mean flow and turbulence quantities inside a rotating turbo-machinery passage. [by hot-wire anemometer] (1975) (14)
Three-dimensional flow field downstream of an axial-flow turbine rotor (1998) (14)
Numerical Simulation of Turbine Blade Boundary Layer and Heat Transfer and Assessment of Turbulence Models (1997) (14)
Development and Validation of Navier-Stokes Procedure for Turbomachinery Unsteady Flow (1997) (13)
Investigation of Compressor Rotor Wake Structure at Peak Pressure Rise Coefficient and Effects of Loading (1992) (13)
Three-Dimensional Navier-Stokes Computation of Turbomachinery Flows Using an Explicit Numerical Procedure and a Coupled k-ε Turbulence Model (1991) (13)
Steady and Unsteady Three Dimensional Flow Field Downstream of an Embedded Stator in a Multistage Axial Flow Compressor: Part 2 — Composite Flow Field (1998) (13)
Laser-Doppler Velocimeter Measurement of Annulus Wall Boundary Layer Development in a Compressor Rotor (1988) (13)
Grid generation for three-dimensional turbomachinery geometries including tip clearance (1991) (12)
Investigation of Tip Clearance Phenomena in an Axial Compressor Cascade Using Euler and Navier-Stokes Procedures (1992) (12)
Experimental Investigation of Steady and UnsteadyFlow Field Downstream of an Automotive TorqueConverter Turbine and Stator (1995) (12)
Investigation of the tip clearance flow inside and at the exit of a compressor rotor passage-part II: turbulence properties (1982) (12)
Effect of Inlet Turbulence on Compressor Noise (1974) (12)
Tip clearance flow in a compressor rotor passage at design and off-design conditions (1984) (12)
Computation of internal incompressible separated flows using a space-marching technique (1985) (12)
Rotor Wake Mixing Effects Downstream of a Compressor Rotor (1981) (12)
Three-Dimensional Boundary Layer on a Compressor Rotor Blade at Peak Pressure Rise Coefficient (1986) (11)
Experimental Investigation of Steady and Unsteady Flow Field Downstream of an Automotive Torque Converter Turbine and Inside the Stator: Part II—Unsteady Pressure on the Stator Blade Surface (1997) (11)
Experimental Investigation of the Flow Field in a Multistage Axial Flow Compressor (1994) (11)
Closure to “Discussions of ‘Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachinery’” (1970, ASME J. Basic Eng., 92, pp. 480–481) (1970) (11)
Laser Anemometer Measurements in a Compressor Rotor Flowfield at Off-Design Conditions (1986) (11)
AN ARTIFICIAL DISSIPATION FORMULATION FOR A SEMI-IMPLICIT, PRESSURE BASED SOLUTION SCHEME FOR VISCOUS AND INVISCID FLOWS (1994) (11)
Three-Dimensional Navier-Stokes Computation of Turbine Nozzle Flow With Advanced Turbulence Models (1995) (11)
Freestream turbulence effects on the development of a rotor wake (1980) (10)
Rotating Probe Measurements of the Pump Passage Flow Field in an Automotive Torque Converter (2001) (10)
Unsteady Viscous Flow Causing Rotor-Stator Interaction in Turbines, Part 1: Data, Code Pressure (2000) (10)
Turbine Cooling and Heat Transfer (2007) (10)
Visualization study of flow in axial flow inducer. (1972) (10)
Three sensor hot wire/film technique for three dimensional mean and turbulence flow field measurement (1982) (10)
Three dimensional mean flow and turbulence characteristics of the near wake of a compressor rotor blade (1980) (10)
Computation and turbulence modeling for three-dimensional boundary layers including turbomachinery rotor flows (1990) (10)
Three-Dimensional Flow Field in Rocket Pump Inducers—Part 1: Measured Flow Field Inside the Rotating Blade Passage and at the Exit (1973) (9)
Numerical Simulation of the Effects of Rotor-Stator Spacing and Wake/Blade Count Ratio on Turbomachinery Unsteady Flows (1995) (9)
Computation of Three-Dimensional Viscous Flow in High Reynolds Number Pump Guide Vane (1996) (9)
Unsteady Viscous Flow Causing Rotor-Stator Interaction in Turbines, Part 2: Simulation, Integrated Flowfield, and Interpretation (2000) (9)
Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part II — Unsteady Flow and Pressure Field (1989) (9)
Computation of Unsteady Viscous Flow Using a Pressure-Based Algorithm (1993) (9)
Turbulence Characteristics in the Annulus-Wall Boundary Layer and Wake Mixing Region of a Compressor Rotor Exit (1982) (8)
Steady and Unsteady Three Dimensional Flow Field Downstream of an Embedded Stator in a Multistage Axial Flow Compressor: Part 3 — Deterministic Stress and Heat-Flux Distribution and Average-Passage Equation System (1998) (8)
A space-marching method for incompressible Navier-Stokes equations (1985) (8)
Computation and Simulation of Wake-Generated Unsteady Pressure and Boundary Layers in Cascades: Part 2—Simulation of Unsteady Boundary Layer Flow Physics (1996) (8)
Experimental Investigation of the Flow Field in an Automotive Torque Converter Stator (1999) (8)
Explicit Navier-Stokes Computation of Turbomachinery Flows (1992) (8)
Computation of Unsteady Flowfield over a Hydrofoil, Including Boundary Layer and Wake (1997) (7)
Investigation of three-dimensional flow field in a turbine including rotor/stator interaction. II - Three-dimensional flow field at the exit of the nozzle (1992) (7)
Effects of a Chordwise Gap in an Aerofoil of Finite Span in a Free Stream (1964) (7)
Computation of turbine flowfields with a Navier-Stokes code (1990) (7)
Simulation and Validation of Mach Number Effects on Secondary Flow in a Transonic Turbine Cascade Using a Multigrid, k–ε Solver (1998) (7)
Numerical Simulation of Tip Leakage Flows in Axial Flow Turbines, With Emphasis on Flow Physics: Part I — Effect of Tip Clearance Height (2000) (7)
Three-dimensional flow field downstream of an embedded stator in a multistage axial flow compressor: Part 1: Steady and unsteady flow fields (2001) (7)
Exit Flowfield of an Embedded Stator in a Multistage Axial Flow Compressor (1997) (7)
Tip Clearance Effects in a Turbine Rotor: Part I — Pressure Field and Loss (2000) (7)
Conventional probes for the relative flow measurement in a rotor blade passage (1980) (7)
Effect of shear flows on the outlet angle in axial compressor cascades - Methods of prediction and correlation with experiments. (1967) (6)
Three-Dimensional Flowfield in a Hirbine Nozzle Passage (1996) (6)
A space-marching method for the computation of viscous internal flows (1988) (6)
Extension of lifting-line theory to a cascade of split aerofoils (1964) (6)
Computation and turbulence closure models for shear flows in rotating curved bodies (1984) (6)
A turbulence model for three dimensional turbulent shear flows over curved rotating bodies (1983) (5)
Fully elliptic incompressible flow calculations on regular grid (1992) (5)
Experimental Investigation of End-Wall Flow in Turbine Rotor (2002) (5)
Numerical Prediction of Wakes in Cascades and Compressor Rotors Including the Effects of Mixing: Part II—Rotor Passage Flow and Wakes Including the Effects of Spanwise Mixing (1992) (5)
Blade Loading and Spanwise Effects on Wake Characteristics of Compressor Rotor Blade (1982) (5)
Computation and Simulation of Wake-Generated Unsteady Pressure and Boundary Layers in Cascades: Part 2 — Simulation of Unsteady Boundary Layer Flow Physics (1994) (5)
Navier-Stokes analysis of turbine flowfield and external heat transfer (1995) (5)
Computation of Three-Dimensional Steady and Unsteady Flow Through a Compressor Stage (1996) (5)
Numerical prediction of unsteady transitional boundary layer flow due to rotor-stator interaction (1997) (5)
Three-Dimensional Navier-Stokes Analysis of Turbine Rotor and Tip-Leakage Flowfield (1997) (5)
Three-Dimensional Flow Field in Rocket Pump Inducers—Part 2: Three-Dimensional Viscid Flow Analysis, and Hot Wire Data on Three-Dimensional Mean Flow and Turbulence Inside the Rotor Passage (1975) (4)
Experimental Investigation of Steady and UnsteadyFlow Field Upstream and Downstream of anAutomotive Torque Converter Pump (1999) (4)
Three-Dimensional Potential Flow and Effects of Blade Dihedral in Axial Flow Propeller Pumps (1977) (4)
Computation of turbulent rotating channel flow with an algebraic Reynolds stress model (1986) (4)
Three-dimensional turbulent boundary-layer development on a fan rotor blade (1984) (4)
Computation of unsteady viscous flow using an efficient algorithm (1991) (4)
Experimental and numerical study of unsteady viscous flow due to rotor-stator interaction in turbines. I - Data, code, and pressure field (1998) (4)
Calculation of three-dimensional turbomachinery rotor flow using pseudocompressibility and zonal techniques (1989) (4)
A simplified Reynolds stress model for unsteady turbulent boundary layers (1993) (4)
Three dimensional flow field inside the passage of a low speed axial flow compressor rotor (1982) (4)
Numerical Prediction of Wakes in Cascades and Compressor Rotors Including the Effects of Mixing: Part I—Cascade Wakes Including the Effects of Incidence and Free-Stream Turbulence (1992) (4)
Two-dimensional model of laser-sustained plasmas in axisymmetric flowfields (1986) (4)
Computation of Three-Dimensional Turbulent Turbomachinery Flows Using a Coupled Parabolic-Marching Method (1988) (4)
Three-Dimensional Blade Boundary Layer and Endwall Flow Development in the Nozzle Passage of a Single Stage Turbine (1996) (4)
Computation of curved flows using a modified k-epsilon model of turbulence based on algebraic Reynolds stress relations (1993) (3)
On the shear pumping effect in rocket pump inducers (1978) (3)
Three-dimensional turbulent boundary layers (1983) (3)
Computation of three dimensional turbulent boundary layers in internal flows, including turbomachinery rotor blades (1989) (3)
Three Dimensional Viscous Flow Field in an Axial Flow Turbine Nozzle Passage (1997) (3)
Three dimensional analysis and measurement of the flow in a three bladed rocket pump inducer (1970) (3)
Analytical and experimental study of flow phenomena in noncavitating rocket pump inducers (1981) (3)
An AISI-sponsored collaborative project on FeO-type sliver defects (2000) (3)
Numerical Simulation of Tip Leakage Flows in Axial Flow Turbines, With Emphasis on Flow Physics: Part II — Effect of Outer Casing Relative Motion (2000) (3)
Comparison of computational methods for three-dimensional turbulent turbomachinery flows (1988) (3)
Flow Field in the Turbine Rotor Passage in an Automotive Torque Converter Based on the High Frequency Response Rotating Five-hole Probe Measurement Part II: Flow Field at the Off-design Condition and Effects of Speed Ratio (2001) (3)
A simple device for the qualitative measurement of the vortices (1964) (3)
Three-dimensional flow field in a turbine nozzle passage (1993) (3)
Navier-Stokes investigation of a transonic centrifugal compressor stage using an algebraic Reynolds stress model (1992) (3)
Flow Field in the Turbine Rotor Passagein an Automotive Torque Converter Based on the HighFrequency Response Rotating Five-hole ProbeMeasurement Part I: Flow Field at the Design Condition (Speed Ratio 0.6) (2001) (3)
Calculation of a Three-Dimensional Turbomachinery Rotor Flow With a Navier-Stokes Code (1987) (3)
Investigations and analysis of flow phenomena in axial flow inducers Semiannual progress report (1969) (2)
Investigation of boundary layer and turbulence characteristics inside the passages of an axial flow inducer (1973) (2)
Three-dimensional flow field downstream of an embedded stator in a multistage axial flow compressor: Part 2: Deterministic stress and heat flux distribution and average-passage equation system (2001) (2)
Numerical Prediction of Wakes in Cascades and Compressor Rotors Including the Effects of Mixing: Part II — Rotor Passage Flow and Wakes Including the Effects of Spanwise Mixing (1991) (2)
Analytical and experimental study of mean flow and turbulence characteristics inside the passages of an axial flow inducer (1974) (2)
Book Review: Cascade Aerodynamics, by J . P. Gostelow (1985) (2)
Closure to “Discussion of ‘Mean Velocity and Decay Characteristics of the Guidevane and Stator Blade Wake of an Axial Flow Compressor’” (1980, ASME J. Eng. Power, 102, p. 60) (1980) (2)
Wall Boundary Layer Development Near the Tip Region of an IGV of an Axial Flow Compressor (1984) (2)
Computation and Simulation of Wake-Generated Unsteady Pressure and Boundary Layers in Cascades: Part 1 — Description of the Approach and Validation (1994) (2)
Airfoil in a Contracting or Diverging Stream (1972) (2)
Experimental Investigation of Steady and Unsteady Flow Field Downstream of an Automotive Torque Converter Turbine and Inside the Stator: Part II — Unsteady Pressure on the Stator Blade Surface (1995) (2)
Calculation of a three-dimensional locally elliptic flow with a zonal equation method (1987) (2)
A Loosely Coupled Unsteady Flow Simulation of a Single Stage Compressor (1998) (2)
Blade Loading and Rotation Effects on Compressor Rotor Wake Near End Walls (1983) (2)
Simulation and Validation of Mach Number Effects on Secondary Flow in a Transonic Turbine Using a Multigrid, k-ε Solver (1996) (2)
Dynamic and thermal turbulent time scale modelling for wall-bounded shear flows (1995) (2)
Noise Due to Interaction of Boundary Layer Turbulence with a Compressor or a Propulser Rotor. (1976) (2)
Assessment of Three-Dimensional Inviscid Effects in Turbomachinery Using Simple Models (1976) (2)
Investigations of three dimensional flow characteristics in a three bladed rocket pump inducer (1973) (2)
Computation of turbulent flows on rotating bodies and ducts (1986) (2)
Computation of viscous flows in turbomachinery cascades with a space-marching method (1986) (1)
Two‐ and Three‐Dimensional Viscous Effects and Losses (2007) (1)
The Three Dimensional Flow Field at the Exit of an Axial-Flow Turbine Rotor (1998) (1)
Computational techniques and validation of 3-dimensional viscous/turbulent codes for internal flows (1989) (1)
Development of Secondary Flow and Vorticity in Curved Ducts, Cascades, and Rotors, Including Effects of Viscosity and Rotation (1982) (1)
Analysis of three-dimensional turbulent wakes by momentum integral technique (1987) (1)
Dynamic and Thermal Turbulent Time Scale Modelling for Homogeneous Shear Flows (1994) (1)
Three dimensional flow field inside compressor rotor, including blade boundary layers (1982) (1)
Experimental and analytical investigation of flow through rocket pump inducer (1974) (1)
Closure to “Discussion of ‘A Method of Measuring the Three-Dimensional Mean Flow and Turbulence Quantities Inside a Rotating Turbo-machinery Passage’” (1976, ASME J. Eng. Power, 98, pp. 144–145) (1976) (1)
Turbulence Modeling and Computation of Turbine Aerodynamics and Heat Transfer (1996) (1)
Relaxation solution of high subsonic cascade flows and extension of this method to transonic cascades (1975) (1)
Closure to “Discussion of ‘Prediction of Cascade Performance Using an Incompressible Navier–Stokes Technique’” (1991, ASME J. Turbomach., 113, pp. 571–572) (1991) (1)
A pressure based method for the solution of viscous incompressible turbomachinery flows (1991) (1)
Sensitivity of Three Sensor Hot Wire Probe to Yaw and Pitch Angle Variation (1988) (1)
A comparison of computational methods for three-dimensional, turbulent turbomachinery flow fields (1986) (1)
Stability of explicit 3D Navier-Stokes/k-epsilon procedures in complex internal flow calculations (1991) (1)
Three dimensional turbulent boundary layer development on a fan rotor blade (1982) (1)
Experimental and numerical study of unsteady viscous flow due to rotor stator interaction in turbines. II - Simulation, integrated flow fields and interpretation (1998) (1)
Investigations and analysis of flow phenomena of secondary motions in axial flow inducers Progress report, nine month period ending 31 Mar. 1969 (1969) (1)
A multiple pass space-marching method for three-dimensional incompressible viscous flow (1992) (1)
NUMERICAL SIMULATION OF TIP CLEARANCE EFFECTS (2015) (1)
Fundamental Principles, Analysis, and Performance of Turbomachinery (2007) (1)
Assessment Of Navier-Stokes and Boundary Layeer Procedures for the Prediction of Two-Dimensional Viscous Flow in a Turbine Nozzle (1996) (1)
Numerical Prediction of Wakes in Cascades and Compressor Rotors Including the Effects of Mixing: Part I — Cascade Wakes Including the Effects of Incidence and Freestream Turbulence (1991) (0)
Discussion: “Turbulence and Unsteadiness Measurements Downstream of a Moving Blade Row” (Evans, R. L., 1975, ASME J. Eng. Power, 97, pp. 131–137) (1975) (0)
Appendix A: Transformation of Equation 1.18 into a Curvilinear (Body‐Fitted) Coordinate System (2007) (0)
NOISE DUE TO THE INTERACTION OF BOUNDARY LAYER TURBULENCE WITH A MARINE PROPULSOR OR AN AIRCRAFT COMPRESSOR (1976) (0)
STEADY AND UNSTEADY THREE-DIMENSIONAL FLOW FIELD DOWNSTREAM OF AN EMBEDDED STATOR IN A MULTISTAGE AXIAL FLOW COMPRESSOR-PART 1: UNSTEADY VELOCITY FIELD J. Prato, B. Lakshminarayana and N. Suryavamshi (2010) (0)
A new facility to study three dimensional viscous flow and rotor-stator interaction in turbines (1989) (0)
Computation of Turbulent Flow Through Strongly Curved Ducts and End-Wall Flows in Cascades Using a Space-Marching Method (1991) (0)
Closure to “Discussion of ‘Assessment of Three-Dimensional Inviscid Effects in Turbomachinery Using Simple Models’” (1976, ASME J. Fluids Eng., 98, p. 172) (1976) (0)
Numerical computation of aerodynamics and heat transfer in a turbine cascade and a turn-around duct using advanced turbulence models (1993) (0)
Closure to “Discussion of ‘An Experimental Study of the Compressor Rotor Blade Boundary Layer’” (1985, ASME J. Eng. Gas Turbines Power, 107, p. 372) (1985) (0)
Three dimensional flow field in rocket pump inducers. Part 2: Mean flow and turbulence characteristics inside the rotor passage, and theoretical analysis (1975) (0)
COMPUTATION OF SUPERSONIC AND LOW SUBSONIC CASCADE FLOWS USING AN EXPLICIT NAVIER-STOKES TECHNIQUE AND THE k-E (2008) (0)
SIMULATION AND VALIDATION OF MACH NUMBER EFFECTS ON SECONDARY FLOW IN A TRANSONIC TURBINE USING A MULTIGRID, k-e SOLVER M. Koiro and B. Lakshminarayana (2012) (0)
Computation of flows in a turn-around duct and a turbine cascade using advanced turbulence models (1993) (0)
Classification and Basic Concepts of Fluid Mechanics (2007) (0)
Three-Dimensional Flowfield Inside a Low-Speed Axial Flow Compressor Rotor (1983) (0)
Numerical simulation of turbomachinery flows with advanced turbulence models (1992) (0)
Numerical simulation of steady and unsteady viscous flow in turbomachinery using pressure based algorithm (1993) (0)
Relaxation Solution of High-Subsonic Cascade Flows (1975) (0)
DEVELOPMENT AND VALIDATION OF NAVIER-STOKES PROCEDURE FOR (1997) (0)
Computation of supersonic and low subsonic cascade flows using an explicit Navier-Stokes technique and the kappa-epsilon turbulence model (1991) (0)
Penn State axial flow turbine facility: Performance and nozzle flow field (1991) (0)
Closure to “Discussions of ‘Effects of Inlet Temperature Gradients on Turbomachinery Performance’” (1975, ASME J. Eng. Power, 97, pp. 71–73) (1975) (0)
Closure to “Discussions of ‘An Experimental Study of Three-Dimensional Turbulent Boundary Layer and Turbulence Characteristics Inside a Turbomachinery Rotor Passage’” (1978, ASME J. Eng. Power, 100, pp. 688–689) (1978) (0)
Appendix B: Basic Computational Techniques (2007) (0)
Computation of viscous flows in turbomachinery cascades (1983) (0)
Computation and modeling of aero-thermal fields in turbine cascades and strongly curved ducts (1994) (0)
Numerical Prediction of Unsteady Transitional Boundary Layer Flows due to Rotor-Stator Interaction(II)-Characteristics of Unsteady Transitional Boundary Layer Flow- (1998) (0)
Closure to “Discussion of ‘Three Dimensional Characteristics of Turbulent Wakes Behind Rotors of Axial Flow Turbomachinery’” (1976, ASME J. Eng. Power, 98, p. 227) (1976) (0)
Three dimensional flow field due to a vortex and source line spanning an annulus (1975) (0)
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (2010) (0)
Computational techniques and validation of 3D viscous/turbulent codes for internal flows (1988) (0)
The Static Pressure Field on the Casing of the Turbine Rotor in an Automotive Torque Converter Based on High Frequency-Response Rotating Probe Measurement (2002) (0)
Investigation of Tip Clearance Flow Fields and Methods of Desensitizing Tip Clearance Effects in Turbines (2000) (0)
Three-dimensional turbulent boundary layers in turbomachines (1983) (0)
Numerical Prediction of Unsteady Transitional Boundary Layer Caused by Rotor-Stator Interaction (1998) (0)
Calculation of a Three-Dimensional Turbomachinery Rotor (2017) (0)
Verification of 3D viscous/turbulent codes for internal flows (1987) (0)
Numerical Simulation of Tip Leakage Flow Turbines, With Emphasis on Flow Physics: Part I — Effect of Tip Clearance Height (2000) (0)
Prediction of Unsteady Transitional Layers in Turbomachinery Using Navier Stokes Equations (1998) (0)
Discussion: “Secondary Flow, Turbulent Diffusion, and Mixing in Axial-Flow Compressors” (Wisler, D. C., Bauer, R. C., and Okiishi, T. H., 1987, ASME J. Turbomach., 109, pp. 455–469) (1987) (0)
Closure to “Discussion of ‘Three-Dimensional Blade Boundary Layer and Endwall Flow Development in the Nozzle Passage of a Single Stage Turbine’” (1998, ASME J. Fluids Eng., 120, p. 578) (1998) (0)
Books on Turbomachinery (2007) (0)
Three-Dimensional Potential Flow around a Body Spanning an Annulus: Computer Program and Solution. (1973) (0)
End wall flows in rotors and stators of a single stage compressor (1981) (0)
Lift Distribution and Lift-Induced Drag Ratio of a Finite Wing in an Infinite Cascade (1962) (0)
Closure to “Discussions of ‘Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part 2—Unsteady Flow and Pressure Field’” (1990, ASME J. Turbomach., 112, pp. 688–689) (1990) (0)
Computation of Turbomachinery Flows (2007) (0)
Closure to “Discussion of ‘Mean Velocity and Decay Characteristics of the Near and Far-Wake of a Compressor Rotor Blade of Moderate Loading’” (1980, ASME J. Eng. Power, 102, pp. 547–548) (1980) (0)
Discussion: “Unsteady Flow in Cavitating Turbopumps” (Kim, J. H., and Acosta, A. J., 1975, ASME J. Fluids Eng., 97, pp. 412–417) (1975) (0)
Three‐Dimensional Inviscid and Quasi‐Viscous Flow Field (2007) (0)
Cascade Inviscid Flows (2007) (0)
Unsteady Flow Field in a Multistage Axial Flow Compressor (1997) (0)
Closure to “Discussion of ‘Computation and Simulation of Wake-Generated Unsteady Pressure and Boundary Layers in Cascades: Part 2—Simulation of Unsteady Boundary Layer Flow Physics’” (1996, ASME J. Turbomach., 118, p. 120–121) (1996) (0)
N 91-24336 A New Facility to Ssudy Three Dimensional Viscous Flow and Rotor-Stator Interaction in Turbines-A Progress Report (0)
Analysis of three-dimensional turbulent wakes by a momentum integraltechnique (1988) (0)
Discussion: “The Quasi-steady Design of a Compressor or Pump Stage for Minimum Fluctuating Lift” (Gearhart, W. S., Henderson, R. E., McMahon, J. F., and Horlock, J. H., 1969, ASME J. Eng. Power, 91, pp. 31–36) (1969) (0)
Measurement methods in rotating components of turbomachinery : presented at Joint Fluids Engineering Gas Turbine Conference and Products Show, New Orleans, Louisiana, March 10-13, 1980 (1980) (0)
Closure to “Discussion of ‘A Method of Measuring Three-Dimensional Rotating Wakes Behind Turbomachinery Rotors’” (1975, ASME J. Fluids Eng., 97, pp. 627–628) (1975) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Budugur Lakshminarayana?

Budugur Lakshminarayana is affiliated with the following schools:

Pennsylvania State University

Budugur Lakshminarayana's Academic­Influence.com Rankings

Why Is Budugur Lakshminarayana Influential?

Budugur Lakshminarayana's Published Works

Published Works

What Schools Are Affiliated With Budugur Lakshminarayana?

Budugur Lakshminarayana's AcademicInfluence.com Rankings