Basil Favis
#80,147
Most Influential Person Now
Canadian scientist
Basil Favis's AcademicInfluence.com Rankings
Basil Favischemistry Degrees
Chemistry
#1597
World Rank
#2358
Historical Rank
Physical Chemistry
#347
World Rank
#396
Historical Rank
Download Badge
Chemistry
Why Is Basil Favis Influential?
(Suggest an Edit or Addition)According to Wikipedia, Basil D. Favis is a full professor in Department of Chemical Engineering, Ecole Polytechnique de Montreal and the director of Center for Research on High Performance Polymer and Composite Systems . Favis is the author or co-author of more than 170 scientific papers and is one of the most highly cited authors in the polymer/biopolymer blends field. In 1995 Favis was the recipient of the Syncrude Canada Innovation Award of the Canadian Society for Chemical Engineering. He is the past chairman of the Macromolecular Science and Engineering Division of the Chemical Institute of Canada, a Fellow of the Chemical Institute of Canada, a Fellow of the Society of Plastics Engineers, a member of the Quebec Order of Engineers and in 1997-1998 was the Invited Professor at the University of Strasbourg in France.
Basil Favis's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing (1987) (308)
- Binary and ternary blends of polylactide, polycaprolactone and thermoplastic starch (2008) (275)
- Influence of composition on the morphology of polypropylene/polycarbonate blends (1988) (251)
- High performance LDPE/thermoplastic starch blends: a sustainable alternative to pure polyethylene (2003) (228)
- Rheology and extrusion foaming of chain‐branched poly(lactic acid) (2010) (213)
- Rheological and thermal properties of thermoplastic starch with high glycerol content (2004) (195)
- The effect of processing parameters on the morphology of an immiscible binary blend (1990) (194)
- Processing‐morphology relationships of compatibilized polyolefin/polyamide blends. Part I: The effect of an lonomer compatibilizer on blend morphology (1988) (194)
- Controlled preparation and properties of porous poly(L-lactide) obtained from a co-continuous blend of two biodegradable polymers. (2004) (192)
- Factors influencing structure formation and phase size in an immiscible polymer blend of polycarbonate and polypropylene prepared by twin-screw extrusion (1991) (168)
- Extrusion foaming of semi-crystalline PLA and PLA/thermoplastic starch blends. (2007) (166)
- The Role of the Blend Interface Type on Morphology in Cocontinuous Polymer Blends (2002) (154)
- Processing and characterization of thermoplastic starch/polyethylene blends (1997) (147)
- Polymer blends containing poly(3-hydroxyalkanoate)s (1994) (146)
- Crystallinity development in cellular poly(lactic acid) in the presence of supercritical carbon dioxide (2009) (132)
- PHASE SIZE/COMPOSITION DEPENDENCE IN IMMISCIBLE BLENDS : EXPERIMENTAL AND THEORETICAL CONSIDERATIONS (1990) (129)
- Cocontinuity and phase inversion in HDPE/PS blends: Influence of interfacial modification and elasticity (1998) (126)
- Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends (2015) (119)
- Interface/morphology relationships in polymer blends with thermoplastic starch (2009) (118)
- Morphology control in co-continuous poly(L-lactide)/polystyrene blends: a route towards highly structured and interconnected porosity in poly(L-lactide) materials. (2003) (114)
- Factors influencing encapsulation behavior in composite droplet-type polymer blends (2003) (113)
- The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends (1997) (109)
- Morphological stability, interfacial tension, and dual-phase continuity in polystyrene-polyethylene blends (1997) (108)
- Diblock copolymers as emulsifying agents in polymer blends: Influence of molecular weight, architecture, and chemical composition (1996) (106)
- Control of the Subinclusion Microstructure in HDPE/PS/PMMA Ternary Blends (2000) (102)
- Properties of PETG/EVA blends: 1. Viscoelastic, morphological and interfacial properties (1996) (100)
- The role of interfacial contact in immiscible binary polymer blends and its influence on mechanical properties (1996) (97)
- Processing-morphology relationships of compatibilized polyolefin/polyamide blends (1991) (95)
- Polymer alloys and blends: Recent advances (1991) (94)
- Weldlines in injection‐molded parts: A review (1995) (93)
- Coarsening of immiscible Co-continuous blends during quiescent annealing (2005) (92)
- Localization of micro- and nano-silica particles in heterophase poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends (2015) (89)
- Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends (1996) (85)
- Processing and properties of PLA/thermoplastic starch/montmorillonite nanocomposites (2010) (84)
- Characterizing co-continuous high density polyethylene/polystyrene blends (2001) (84)
- Factors influencing the formation of elongated morphologies in immiscible polymer blends during melt processing (1993) (83)
- Phase size/interface relationships in polymer blends: the emulsification curve (1994) (83)
- Co-continuous morphology development in partially miscible PMMA/PC blends (2002) (81)
- Morphological states for a ternary polymer blend demonstrating complete wetting (2010) (79)
- Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide) (2017) (78)
- Reactive processing of polystyrene‐co‐maleic anhydride/elastomer blends: Processing‐morphology‐property relationships (1990) (77)
- Tuning viscoelastic and crystallization properties of polypropylene containing in-situ generated high aspect ratio polyethylene terephthalate fibrils (2015) (72)
- Novel Self-Assembling Close-Packed Droplet Array at the Interface in Ternary Polymer Blends (2009) (72)
- Ultralow Percolation Thresholds in Ternary Cocontinuous Polymer Blends (2007) (69)
- Interfacial modification of polymer blends—the emulsification curve: 1. Influence of molecular weight and chemical composition of the interfacial modifier (1995) (67)
- The influence of coalescence on the morphology of the minor phase in melt-drawn polyamide-6/HDPE blends (1996) (66)
- Continuity development in polymer blends of very low interfacial tension (2006) (65)
- Aggregated indicator to assess land use impacts in life cycle assessment (LCA) based on the economic value of ecosystem services (2015) (65)
- Fractional Separation of Middle Lamella and Secondary Wall Tissue From Spruce Wood (1981) (65)
- Correlation between the Interfacial Tension and Dispersed Phase Morphology in Interfacially Modified Blends of LLDPE and PVC (1999) (64)
- Morphology Development and Interfacial Interactions in Polycaprolactone/Thermoplastic‐Starch Blends (2010) (62)
- Toughening of Cocontinuous Polylactide/Polyethylene Blends via an Interfacially Percolated Intermediate Phase (2018) (61)
- Macroporous poly(L-lactide) of controlled pore size derived from the annealing of co-continuous polystyrene/poly(L-lactide) blends. (2004) (60)
- Carbon nanotubes in blends of polycaprolactone/thermoplastic starch. (2013) (60)
- The influence of partial emulsification on coalescence suppression and interfacial tension reduction in PP/PET blends (1999) (57)
- Morphological and mechanical properties of extruded polypropylene/nylon-6 blends (1988) (56)
- Morphology development in a polyethylene/polystyrene binary blend during twin-screw extrusion (1998) (54)
- The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on morphology, rheology and mechanical properties (2016) (53)
- Tunable morphologies for ternary blends with poly(butylene succinate): Partial and complete wetting phenomena (2013) (51)
- Reactive compatibilization of polyester/vinyl acetate copolymer blends: rheological, morphological and mechanical properties (1994) (49)
- High performance polyethylene/thermoplastic starch blends through controlled emulsification phenomena. (2013) (48)
- In Situ Measure of Interfacial Tensions in Ternary and Quaternary Immiscible Polymer Blends Demonstrating Partial Wetting (2009) (47)
- Localization of micro and nano- silica particles in a high interfacial tension poly(lactic acid)/low density polyethylene system (2015) (47)
- Low percolation threshold conductive device derived from a five-component polymer blend (2010) (46)
- Compatibilization and toughening of co-continuous ternary blends via partially wet droplets at the interface (2017) (44)
- The interaction of a cationic silane coupling agent with mica (1983) (43)
- Interfacial coarsening of ternary polymer blends with partial and complete wetting structures (2013) (42)
- Ultraporous Nanosheath Materials by Layer‐by‐Layer Deposition onto Co‐continuous Polymer‐Blend Templates (2006) (41)
- Injection molding of polypropylene/polycarbonate blends (1990) (41)
- Investigating the morphology/rheology interrelationships in immiscible polymer blends (2000) (41)
- Effect of viscosity in ternary polymer blends displaying partial wetting phenomena (2011) (40)
- Interfacial tension reduction and coalescence suppression in compatibilized polymer blends (1999) (40)
- Towards ultraporous poly(L-lactide) scaffolds from quaternary immiscible polymer blends. (2010) (40)
- Morphology Development and Interfacial Erosion in Reactive Polymer Blending (2008) (39)
- Impact fracture behavior of nylon-6/ABS blends (1997) (39)
- Core–shell structure and segregation effects in composite droplet polymer blends (2003) (39)
- Foaming of Polystyrene/ Thermoplastic Starch Blends (2007) (38)
- The influence of interfacial interactions on the morphology and thermal properties of binary polymer blends (1993) (38)
- Determination of a limiting dispersed phase concentration for coalescence in PA6/HDPE blends under extensional flow (2001) (37)
- Influence of temperature-induced coalescence effects on co-continuous morphology in poly(ε-caprolactone)/polystyrene blends (2005) (37)
- Morphology−Interface−Property Relationships in Polystyrene/Ethylene−Propylene Rubber Blends. 1. Influence of Triblock Copolymer Interfacial Modifiers (1997) (36)
- High molecular weight plasticizers in thermoplastic starch/polyethylene blends (2013) (36)
- Morphology development in poly (lactic acid)/polyamide11 biobased blends: Chain mobility and interfacial interactions (2017) (35)
- Controlling burst and final drug release times from porous polylactide devices derived from co-continuous polymer blends. (2009) (35)
- The relative efficacy of diblock and triblock copolymers for a polystyrene/ethylene-propylene rubber interface (1998) (34)
- Measuring the interfacial tension of polymers in the presence of an interfacial modifier: Migrating the modifier to the interface (1998) (33)
- Morphology modification by interfacial chemical reaction in a polyester/ethylene vinyl acetate/polyethylene blend (1997) (33)
- Viscoelastic properties and interfacial tension of polystyrene–polyethylene blends (2000) (33)
- Influence of the efficacy of interfacial modification on the coarsening of cocontinuous PS/HDPE blends during quiescent annealing (2006) (32)
- Cellulose nanocrystal in poly(lactic acid)/polyamide11 blends: Preparation, morphology and co-continuity (2018) (32)
- Poly(ε-caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends: model bead and cell infiltration behavior (2014) (32)
- Biodegradation of Thermoplastic Starch and its Blends with Poly(lactic acid) and Polyethylene: Influence of Morphology (2011) (32)
- Strategies to measure and optimize the migration of the interfacial modifier to the interface in immiscible polymer blends (2002) (31)
- Effect of high molecular weight plasticizers on the gelatinization of starch under static and shear conditions. (2013) (30)
- Miscible PS/PPE compounds: an alternative for blend phase morphology studies? Influence of the PPE content on the surface tension of PS/PPE and on the interfacial tension in PP/(PS/PPE) and POM/(PS/PPE) blends (2000) (30)
- Hierarchically porous polymeric materials from ternary polymer blends (2014) (30)
- Pore size and LbL chitosan coating influence mesenchymal stem cell in vitro fibrosis and biomineralization in 3D porous poly(epsilon-caprolactone) scaffolds. (2015) (29)
- Weldline strength in injection molded HDPE/PA6 blends: Influence of interfacial modification (1995) (29)
- High performance materials based on a self‐assembled multiple‐percolated ternary blend (2014) (28)
- Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio‐polyamide11 blends (2018) (28)
- Barrier properties of polyamide-6/high density polyethylene blends (2001) (28)
- High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy (2005) (28)
- Interfacial modification of polymer blends—the emulsification curve: 2. Predicting the critical concentration of interfacial modifier from geometrical considerations (1996) (28)
- Interface Bridging of Multiwalled Carbon Nanotubes in Polylactic Acid/Poly(butylene adipate-co-terephthalate): Morphology, Rheology, and Electrical Conductivity (2020) (28)
- Porous devices derived from co-continuous polymer blends as a route for controlled drug release. (2008) (28)
- Mechanical Properties and Morphology of Ternary PP/EPDM/PE Blends (2008) (28)
- Blends containing poly(hydroxybutyrate-co-12%-hydroxyvalerate) and thermoplastic starch (1995) (27)
- A model for the leaching of lignin macromolecules from pulp fibres (1984) (27)
- Toughening mechanisms in interfacially modified HDPE/thermoplastic starch blends. (2014) (27)
- Self-Assembly of Janus Composite Droplets at the Interface in Quaternary Immiscible Polymer Blends (2011) (27)
- Effect of Dynamic Vulcanization on Co-continuous Morphology (2006) (26)
- Influence of melt drawing on the morphology of one‐ and two‐step processed LDPE/thermoplastic starch blends (2003) (26)
- Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends (2019) (26)
- Generalizing interfacial modification in polymer blends (2012) (25)
- Preparation of composite dispersed phase morphologies in incompatible and compatible blends during melt processing (1992) (25)
- Modified interfacial tensions measured in situ in ternary polymer blends demonstrating partial wetting (2010) (25)
- A patchwork approach to stochastic simulation: A route towards the analysis of morphology in multiphase systems (2008) (25)
- 3D porous polymeric conductive material prepared using LbL deposition (2011) (24)
- Morphology−Interface−Property Relationships in Polystyrene/Ethylene−Propylene Rubber Blends. 2. Influence of Areal Density and Interfacial Saturation of Diblock and Triblock Copolymer Interfacial Modifiers (1999) (24)
- Thin-film membranes derived from co-continuous polymer blends: preparation and performance (2004) (24)
- Hydrophobic Porous Polypropylene with Hierarchical Structures for Ultrafast and Highly Selective Oil/Water Separation. (2021) (24)
- Erosion-dependant continuity development in high viscosity ratio blends of very low interfacial tension (2006) (23)
- The Influence of Thermal History on the Properties of Pol y( 3- hydroxybutyrate-co- 1 20/0-3-hydroxyvaIerate) (1996) (23)
- Assembling Conductive PEBA Copolymer at the Continuous Interface in Ternary Polymer Systems: Morphology and Resistivity (2016) (22)
- Measuring the interfacial tension of polyamide/polyethylene and polycarbonate/polypropylene blends: effect of temperature (2000) (21)
- Morphology and continuity development in highly reactive nanoscale polymer blends (2011) (21)
- Composite droplets with core/shell morphologies prepared from HDPE/PS/PMMA ternary blends by twin‐screw extrusion (2004) (21)
- On the presence of a critical shell volume fraction leading to pseudo-pure droplet behavior in composite droplet polymer blends (2003) (20)
- The Relationship between Starch Gelatinization and Morphology Control in Melt‐Processed Polymer Blends with Thermoplastic Starch (2008) (20)
- Interface/morphology/property relationships in polyamide‐6/ABS blends (1999) (19)
- Deformation of drops in extensional viscoelastic flow (1996) (19)
- The formation of coupling agent monolayers on the surface of Mica (1984) (19)
- Tensile dilatometry of injection-moulded HDPE/PA6 blends (1995) (18)
- Dynamic and steady state flow of polypropylene/mica systems (1984) (17)
- High Temperature Leaching of Lignin From Unbleached Kraft Pulp Fibers (1983) (17)
- Phase identification and interfacial transitions in ternary polymer blends by ToF-SIMS (2014) (17)
- Mechanical degradation of mica during processing with polypropylene (1984) (17)
- Partial to complete wetting transitions in immiscible ternary blends with PLA: the influence of interfacial confinement. (2017) (17)
- Chitosan surface modification of fully interconnected 3D porous poly(ε-caprolactone) by the LbL approach (2015) (17)
- High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility (2017) (16)
- Continuity, morphology and surface resistivity in binary blends of poly(ether-block-amide) with polyethylene and polystyrene (2017) (16)
- Partial and Complete Wetting in Ultralow Interfacial Tension Multiphase Blends with Polylactide. (2016) (16)
- Effect of dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends (2002) (16)
- Processing/morphology/rheology relationships in polymer blends (1992) (16)
- Processing/morphology/rheology relationships in polymer blends (1992) (16)
- Molecular Weight of Lignin Fractions Leached from Unbleached Kraft Pulp Fibers (1984) (15)
- PPE-g-HDPE in high-performance poly(p-phenylene ether)/polyethylene blends: synthesis and compatibilization effects (2018) (14)
- Stability of the co‐continuous morphology during melt mixing for poly(ε‐caprolactone)/polystyrene blends (2007) (13)
- Interfacial tension and acid‐base approaches to polymer interactions (2000) (13)
- Assembling copper nanowires at the interface and in discrete phases in PLA-based polymer blends (2016) (13)
- Interface–property relationships in biaxially stretched PP–PET blends (2000) (12)
- The Effect of Electrolytes on the Leaching of Lignin From Unbleached Kraft Pulp Fibers (1983) (12)
- Coupling of polystyrene to a silane‐treated mica (1983) (12)
- Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(ε-caprolactone) (2020) (12)
- Factors influencing the efficacy of an interfacial modifier for the interface in an immiscible polymer blend (1997) (11)
- Light-scattering characterization of polyblends in the presence of multiple-scattering conditions (1987) (11)
- Surface modification strategies for multicomponent polymer systems,VI:acid–base interactions as a strategy for interfacial modification in immiscible polymer blends (1999) (11)
- Reactive Compatibilization in Brominated Poly(isobutylene-co-p-methylstyrene) and Polyamide Blends (2009) (10)
- Thermal and viscoelastic behavior of polyurethane/polyvinylchloride blends (1992) (10)
- Choice of land reference situation in life cycle impact assessment (2017) (10)
- Droplet-in-Droplet Polymer Blend Microstructures: a Potential Route Toward the Recycling of Co-mingled Plastics (2012) (10)
- Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine (2020) (9)
- Controlling the Hierarchical Structuring of Conductive PEBA in Ternary and Quaternary Blends (2016) (9)
- Ultraporous poly(L-lactide) scaffolds prepared with quaternary immiscible polymer blends modified by copolymer brushes at the interface (2011) (9)
- Analysis of polymer blend morphology by transmission and reflection light scattering techniques (1990) (8)
- Decoupling of reactions in reactive polymer blending for nanoscale morphology control (2012) (8)
- Influence of triblock copolymer interfacial modifiers on fracture behavior of polystyrene/ethylene‐propylene rubber blends (1999) (8)
- Effects of Polyethylene Molecular Weight Distribution on Phase Morphology Development in Poly(p-phenylene ether) and Polyethylene Blends (2018) (8)
- Morphological characterization of simulated polymer blends by light scattering (1992) (8)
- Surface Modification Strategies for Multicomponent Polymer Systems. 2. Study of the Interfacial Tension and Morphology of Linear Low-Density Polyethylene/Poly(vinyl chloride) Blends (1997) (7)
- A polarized light scattering approach for dispersed phase morphology characterization in simulated polymer blends (1994) (7)
- Chitosan coatings with distinct innate immune bioactivities differentially stimulate angiogenesis, osteogenesis and chondrogenesis in poly-caprolactone scaffolds with controlled interconnecting pore size (2021) (7)
- Enhancement in interfacial reactive compatibilization by chain mobility (2014) (7)
- Locating the Modifier in a Polymer Blend by Electron-Energy-Loss Spectroscopy (1995) (7)
- Controlling the continuity and surface migration of conductive poly(ether-block-amide) in melt processed cast-film blends (2018) (6)
- Determination of domain sizes in compatibilized polystyrene-(ethylene-propylene rubber) blends by measurements of 1H spin diffusion (1998) (5)
- Cationic osteogenic peptide P15-CSP coatings promote 3-D osteogenesis in poly(epsilon-caprolactone) scaffolds of distinct pore size. (2017) (5)
- Model Approach for Binder Selection in Binder Jetting (2021) (5)
- Rheology of complex biobased quaternary blends: Poly(lactic acid) [poly(ethylene oxide)]/poly(ether-b-amide)/poly(amide 11) (2021) (5)
- Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(L-lactide) disks (2006) (5)
- Self-assembly of oil microdroplets at the interface in co-continuous polymer blends (2017) (4)
- Surface modification strategies for multicomponent polymer systems. III: Effect of diblock copolymer‐modified rutile on the morphology and mechanical properties of LLDPE/PVC blends (2001) (3)
- Optical Inspection for Industrial Quality and Process Control (1987) (3)
- Factors affecting the surface texture in extruded mica‐polypropylene composites (1984) (3)
- Physicochemical Limitations of Capillary Models Applied to High-Concentration Polymer Solutions (2022) (3)
- Surface Migration of Conductive PEBA in Ternary Polymer Blend Films with Different Wetting Morphologies (2021) (2)
- Nucleation modalities in poly(lactide), poly(butylene succinate), and poly(ε‐caprolactone) ternary blends with partial wetting morphology (2020) (2)
- Linear Burning Rate and Erosivity Properties of Nitrocellulose Propellant Formulations Plasticized by Glycidyl Azide Polymer and Nitroglycerine (2021) (2)
- Linear burning rate of double base propellant containing Azidodeoxycellulose (2020) (2)
- Polymeric compositions containing thermoplastic starch and preparation process (2000) (0)
- Compositions polymeres contenant de l'amidon thermoplastique et leur procede de production (2000) (0)
- Post‐extrusion process for the robust preparation of highly uniform multiphase polymeric 3D printing filaments (2021) (0)
- Controlling the distribution of nanoparticles in hydrogels via interfacial synthesis (2020) (0)
- Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders (2022) (0)
- Study of the Morphology and the Tensile Mechanical Properties of Biaxially Oriented PET/PP Blends (1999) (0)
- List of Oral Presentations (2020) (0)
This paper list is powered by the following services:
Other Resources About Basil Favis
What Schools Are Affiliated With Basil Favis?
Basil Favis is affiliated with the following schools:
