Bill Johnson
#92,791
Most Influential Person Now
British scientist, born 1922
Why Is Bill Johnson Influential?
(Suggest an Edit or Addition)According to Wikipedia, William Johnson FRS FREng was a British engineer, educator, research scientist and Professor of Mechanics at the University of Cambridge. Awards and honours Johnson was elected a Fellow of the Royal Society in 1982. His nomination reads:
Bill Johnson 's Published Works
Published Works
- The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression (1983) (205)
- Inextensional collapse of thin-walled tubes under axial compression (1977) (167)
- The buckling of annular plates in relation to the deep-drawing process (1982) (119)
- Extensible plastic collapse of thin-wall frusta as energy absorbers (1986) (112)
- An analysis of the changes in geometry of a short hollow cylinder during axial compression (1967) (110)
- The crumpling of steel thin-walled tubes and frusta under axial compression at elevated strain-rates: Some experimental results (1984) (99)
- Long stroke energy dissipation in splitting tubes (1983) (97)
- Influence of axial force on the elastic-plastic bending and springback of a beam (1982) (95)
- SPREAD AND FLOW PATTERNS IN RING ROLLING (1976) (90)
- The mean dynamic yield strength of copper and low carbon steel at elevated temperatures from measurements of the “mushrooming” of flat-ended projectiles (1968) (89)
- Experiments on ring rolling (1968) (82)
- The papers of Sir William Johnson (82)
- On the inextensional axial collapse of thin PVC conical shells (1986) (67)
- Large deformations of thin-walled circular tubes under transverse loading—III: Further experiments on the bending of simply supported tubes (1976) (65)
- Springback after the biaxial elastic-plastic pure bending of a rectangular plate—I (1981) (54)
- Further experiments in asymmetrical rolling (1966) (54)
- High velocity oblique impact and ricochet mainly of long rod projectiles: An overview (1982) (50)
- The compression of crossed layers of thin tubes (1977) (50)
- The use of upper-bound solutions for the determination of temperature distributions in fast hot rolling and axi-symmetric extrusion processes (1960) (46)
- The dynamic compaction of powdered materials (1977) (45)
- The compaction of powder metallurgy bars using high voltage electrical discharges (1976) (45)
- A Survey of Some Physical Defects Arising in Metal Working Processes (1977) (44)
- Cavity formation in rolling profiled rings (1975) (42)
- On springback after the pure bending of beams and plates of elastic work-hardening materials—III (1981) (42)
- The plastica: The large elastic-plastic deflection of a strut (1982) (37)
- Recent Developments in Pitting Corrosion of Aluminium (1971) (35)
- Experiments in the underwater explosive stretch forming of clamped circular blanks (1966) (34)
- The effect of spherical projectile speed in ricochet off water and sand (1976) (34)
- On the range of applicability of results for the springback of an elastic/perfectly plastic rectangular plate after subjecting it to biaxial pure bending—II (1981) (34)
- The modelling of the progressive extensible plastic collapse of thin-wall shells (1988) (31)
- Stamping and springback of circular plates deformed in hemispherical dies (1984) (29)
- The dynamics of the fragmentation process for spherical shells containing explosives (1969) (28)
- On thin rings and short tubes subjected to centrally opposed concentrated loads (1981) (26)
- Indenting with pyramids—I. Theory (1961) (26)
- Temperature distributions in some fast metalworking operations (1960) (25)
- The use of plasticine to simulate the dynamic compression of prismatic blocks of hot metal (1967) (25)
- The effects of temperature, speed and strain-rate on the force and energy required in blanking (1967) (24)
- Plasticine modelled high velocity oblique impact and ricochet of long rods (1982) (24)
- Plastic hinges in ring indentation in relation to ring rolling (1968) (24)
- Experiments in the fast upsetting of short pure lead cylinders and a tentative analysis (1968) (23)
- Upper bounds to the load for the transverse bending of flat rigid-perfectly plastic plates: Part 1 : Using hodographs—A new and simple approach Part 2 : An analogy—Slip line fields for analysing the bending and torsion of plates (1969) (21)
- The trajectory of a projectile when fired parallel and near to the free surface of a plastic solid (1978) (21)
- The limit strains of inhomogeneous sheet metal in biaxial tension (1971) (20)
- Mechanics of high speed impact at normal incidence between plasticine long rods and plates (1981) (19)
- Bending of Long Steel and Aluminium Rods during end Impact with a Rigid Target (1981) (19)
- An investigation into the explosive deep drawing of circular blanks using the plug-cushion technique (1964) (18)
- On anticlastic curvature with special reference to plastic bending: A literature survey and some experimental investigations (1967) (18)
- Some physical defects arising in composite material fabrication (1981) (18)
- Experiments concerning geometric similarity in indentation (1965) (18)
- The ultimate strength of rectangular anisotropic diaphragms (1968) (18)
- Neck Formation and Growth in High-Voltage Discharge Forming of Metal Powders (1982) (17)
- The ricochet of spherical projectiles off sand (1977) (17)
- On the arrangement of rolls in cross-roll straighteners (1981) (16)
- The diametral compression of circular rings by “point” loads (1968) (16)
- Plastic deformation and failure of thin square diaphragms (1968) (15)
- The Effects of Projectile Speed and Medium Resistance in Ricochet off Sand (1981) (15)
- The press-brake bending of rigid/linear work-hardening plates (1981) (15)
- Thin heavy elastic strips at large deflexions (1961) (15)
- An analogy between upper-bound solutions for plane-strain metal working and minimum-weight two-dimensional frames (1961) (15)
- The quasi-static piercing of cylindrical tubes or shells (1980) (14)
- The Large Elastic-Plastic Deflection With Springback of a Circular Plate Subjected to Circumferential Moments (1982) (14)
- A note on times to fracture in solid Perspex spheres due to point explosive loading (1976) (14)
- The indentation of a semi-infinite block by a wedge of comparable hardness—I. Theoretical (1964) (14)
- The perforation of circular plates with four-sided pyramidally-headed square-section punches (1978) (14)
- Cylindrical bending of metal strips (1983) (13)
- The Mechanics of Some Industrial Pressing, Rolling, and Forging Processes (1982) (13)
- Stamping Rectangular Plates into Doubly-Curved Dies (1984) (13)
- Dynamic indentation of copper, an aluminium alloy and mild steel with conical projectiles and dynamic tip flattening of conical projectiles at ambient temperature (1965) (12)
- The ultimate strength of rectangular diaphragms (1967) (12)
- Plane strain extrusion through partially rough curved dies (1963) (12)
- On tangential velocity discontinuities being coincident with stress discontinuities (1982) (11)
- Fracture development in solid perspex spheres with short cylindrical projections (bosses) due to point explosive loading (1977) (11)
- Forces developed during the ricochet of projectiles of spherical and other shapes (1977) (11)
- Dynamic Indentation of Copper and an Aluminium Alloy with a Conical Projectile at Elevated Temperatures (1965) (10)
- The Angle of Fold and the Plastic Work Done in the Folding of Developable Flat Sheets of Metal (1980) (9)
- The plastic extension of a chain of rings due to an axial impact load (1978) (9)
- Plane strain drawing and extrusion of a rigid-perfectly plastic material through concave dies (1968) (9)
- Rolling of rings (1979) (9)
- Indenting with pyramids—II experimental (1962) (9)
- The quasi-static compression of non-circular prismatic blocks between very rough platens using the “friction hill” concept (1966) (9)
- The co-indentation of a layer by two flat plane or spherical-headed, rigid punches (1977) (9)
- Some force plane diagrams for plane strain slip-line fields (1978) (9)
- Piercing of Cylindrical Tubes (1981) (8)
- The compression of rigid-perfectly-plastic material between rough parallel dies of unequal width (1960) (8)
- Experimental study of the rolling torus load limiter (1975) (8)
- A note on the formation of fulgurites (1980) (8)
- Experiments in the piercing of soft metals (1962) (8)
- Further experiments concerning geometrically similar indentations (1966) (8)
- A reconsideration and some new results for the circular beam impact problem (1986) (8)
- On the range of applicability of results for the springback of an elastic/work-hardening rectangular plate after subjecting it to biaxial pure bending—IV (1981) (8)
- James Nasmyth (1808–1890): The steam hammer and the mechanics of Vee-anvil forging (1992) (7)
- The ricochet of dumb-bell shaped projectiles (1977) (7)
- The free radial expansion of thin cylindrical brass tubes using explosive gas mixtures (1968) (7)
- The cutting of metal strips between partly rough knife-edge tools (1961) (7)
- The plastic hinge position in a circular cantilever when struck normal to its plane by a constant jet at its tip (1985) (6)
- Graphodynamics applied to weight-piston-liquid impact (1964) (6)
- Voltaire as student of fire science, manufacture and man of business (1996) (6)
- Defects in cold-hydrostatically-extruded aluminium, iron and nickel-base powder compacts (1981) (6)
- Slip-line fields of indirect type for end extrusion through partly rough square dies (1988) (6)
- The fracture in some explosively end-loaded bars of plaster of Paris and Perspex containing transverse holes or changes in section (1977) (6)
- Low cycle high strain bending fatigue tests on ductile metals (1965) (6)
- Sir William Johnson: Interpreter of the Iroquois (1963) (5)
- Temperature development based on technological analysis: Fast rolling as an example (1960) (5)
- Manufacturing defect studies noting some of the early ideas of Robert Mallett (1810–1881), Irish engineer-scientist (1991) (5)
- Multiple Impact Erosion of Ductile Metals by Spherical Particles (1977) (5)
- Production of Tungsten—Iron—Nickel Alloys by Mechanical Alloying Technique (1980) (5)
- On the Peen-Forming of Metals (1981) (5)
- A Theoretical Analysis of the Bending into Cylindrical Dies of Metal Strips (1984) (4)
- Damage in plates due to surface rings of explosive (1976) (4)
- Some slip line fields for indenting with rotating dies (1963) (4)
- Results for the Single Ricochet of Spherical-Ended Projectiles off Sand and Clay at up to 400 M/SEC (1979) (4)
- The compression of crossed layers of wooden bars (1983) (4)
- The compression loading of solid spheres of plaster of Paris (1977) (4)
- Some Factors in the Shot-Peening and Peen-Forming Processes (1977) (4)
- A shear cell for the determination of the dynamic shear strength and flow behaviour of particulate materials (1977) (3)
- Plastic torsion of prismatic metal bars—mainly in respect of length changes: A review (1988) (3)
- Third Paper: Comparison of the Behaviour of Different Sheet Materials Formed by the Underwater Spark Discharge Method (1964) (3)
- The Papers of Sir William Johnson, Volume XII (1959) (3)
- Heat Generation in the High Voltage Discharge Forming of Sponge Iron Powders (1981) (3)
- Closed-Die Forging of Rectangular Billets with Diamond-Shaped Dies (1981) (3)
- Approximate calculations on the large plastic deformation of helical springs and their possible application in a vehicle arresting system (1981) (2)
- Forming of superplastic zincaluminium sheet into are-entrant die (1977) (2)
- The Normal Impact of square Section long rods on ‘Rigid’ and ‘Soft’ Targets (1982) (2)
- On the plane plastic flow of rectangular billets forged with diamond-shaped closed dies (1987) (2)
- Second reflections and spall formation in solid perspex spheres due to point explosive loading in air (1989) (2)
- A Class of Slip-Line Field Solutions for Unsymmetrical Extrusion and Some Experimental Results (1977) (2)
- A SHORT REVIEW OF METAL FORMING MECHANICS AND SOME PROCESSES OF CURRENT RESEARCH INTEREST (1980) (2)
- The Dynamic Blanking, Forging, Indenting and Upsetting of Hot Metals (1970) (2)
- Bursting and bulging of carbon fibre composite discs (1982) (2)
- The plane strain extrusion of initially curved sheet (1966) (1)
- The Cylindrical Bending of Strips and the Biaxial Stamping of Rectangular Plates into Curved Dies (1983) (1)
- On bi-metal thermostats (1962) (1)
- ENERGY DISTRIBUTION AND ASSOCIATED FRACTURE PHENOMENA WHEN EXPLOSIVELY LOADING PARABOLOIDAL‐ENDED PERSPEX RODS EMBEDDED IN LEAD AND AIR (1988) (1)
- Gross Crack Initiation and Propagation in Brittle Thin Solid and Annular Disks Subjected to Impact Loading (1984) (1)
- Buckling in Rotary Forging and Ring Rolling (1985) (1)
- The compaction of some powdered foodstuffs (1976) (1)
- The radiusing of brass components by short-term dry self-tumbling (1983) (1)
- Hard and soft approaches to manufacturing: which is the most important? (2004) (1)
- A personal statement concerning some topics for research attention in engineering mechanics for the next decade (1991) (1)
- The plastic bending of clamped polygonal plates with an application to radial buckling in milk bottle tops (1996) (1)
- An outline of engineering dynamic elasticity and plasticity (1989) (1)
- The Production of Porous Ferrous Components by Extensions of the High Voltage Discharge Forming Process (1980) (1)
- Force Polygons for the Plane Strain Forging of Rectangular Billets with Diamond-Shaped Dies (1985) (1)
- Discussion: “Analytical Puncture Study of Circular Metal Plates” (Shieh, R. C., 1980, ASME J. Pressure Vessel Technol., 102, pp. 242–248) (1981) (0)
- An Estimate of the Effect of Back Spin on the Critical Angle in the Unyawed Ricochet of a Cylinder (1981) (0)
- An Investigation into a Novel Bubble Casting Process for Forming Thin-Walled Aluminium Containers (1969) (0)
- Pre-Christian Technology in alexandria, the life and work of professor H.W. Swift and innovative successes and failures with some processes and tools (1995) (0)
- The Way Ahead : Message from Prof.W.Johnson (1996) (0)
- Fracture and Void Development in Hemi-Spherical Ended Perspex Rods Due to Stress Waves from Detonators (1979) (0)
- Developments in high speed metal forming: by R. Davies and E. R. Austin published by Machinery, Publishing Company, pp. 284. Price £4.20 (1971) (0)
- Large deformations in structures and people caused by impact and blast (1984) (0)
- Elastic Wave Transmission and Reflection in Long Uniform Bars Due to the End Impact of a Rigid Mass (1975) (0)
- Alien Registration- Johnson, William H. (Gorham, Cumberland County) (1940) (0)
- Recent developments in metal forming (1971) (0)
- Early bridge consultants, Benjamin Robins, F. R. S. and Charles Hutton, F. R. S. and mis-judged bridge designer, Thomas Paine (1999) (0)
- 646 From William Johnson 6 June1660 (1991) (0)
- Book reviewSome problems of large plastic deformations in metals under high pressures: B. I. Beresnev, L. F. Vereshchagin, Y. N. Ryabinin and L. D. Livshits: Pergamon Press, Oxford, 1963. 92 pp., 35s (1965) (0)
- 648 From William Johnson 22 June 1660 (1991) (0)
- 525 From William Johnson 9 December 1658 (1991) (0)
- Autobiography of Dr. William Henry Johnson, Respectfully Dedicated to His Adopted Home, the Capital City of the Empire State (2011) (0)
- The Large Elastic Deflection of Thin Strips in V-Die Bending and the Onset of Plasticity (1984) (0)
- Calendar of the Correspondence of Richard Baxter, Vol. 2: 1660–1696: 1660–1696 (1991) (0)
- William H. Johnson : an American modern (2011) (0)
- 553 From William Johnson 15 February 1658/9 (1991) (0)
- XVII. Extracts of some letters, from Sir William Johnson Bart. to Arthur Lee, M. D. F. R. S. on the customs, manners, and languages of the Northern Indians of America (0)
- The Production of a Tungsten Copper Pseudoalloy by Mechanical Alloying Using an Unusual Small Volume Attritor and Liquid Phase Sintering (1980) (0)
- 663 From William Johnson Winter 1666–1 (1991) (0)
- Calendar of the Correspondence of Richard Baxter, Vol. 1: 1638–1660: 1638–1660 (1991) (0)
- 569 From William Johnson 2 May 1659 (1991) (0)
- Recent Japanese Work on Peen-Forming (1977) (0)
- Sand spillage from an open–topped rectangular container when in axial collision (2014) (0)
This paper list is powered by the following services:
Other Resources About Bill Johnson
What Schools Are Affiliated With Bill Johnson ?
Bill Johnson is affiliated with the following schools: