Branko N. Popov

Q: What Schools Are Affiliated With Branko N. Popov

Branko N. Popov is affiliated with the following schools: University of South Carolina, University of Florida, Texas A&M University

Branko N. Popov's AcademicInfluence.com Rankings

Branko N. Popov

Chemistry

#3634

World Rank

#4670

Historical Rank

Chemical Engineering

#432

World Rank

#448

Historical Rank

Physical Chemistry

#506

World Rank

#557

Historical Rank

chemistry Degrees

Download Badge

Chemistry

Branko N. Popov's Degrees

PhD Materials Science and Engineering Stanford University
Masters Chemical Engineering Stanford University
Bachelors Chemical Engineering University of California, Berkeley

Why Is Branko N. Popov Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Branko N. Popov's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Development of First Principles Capacity Fade Model for Li-Ion Cells (2004) (630)
O2 reduction on graphite and nitrogen-doped graphite: experiment and theory. (2006) (553)
Capacity fade study of lithium-ion batteries cycled at high discharge rates (2003) (476)
Electrochemical Determination of the Diffusion Coefficient of Hydrogen Through an LaNi4.25Al0.75 Electrode in Alkaline Aqueous Solution (1995) (469)
Development of a titanium dioxide-supported platinum catalyst with ultrahigh stability for polymer electrolyte membrane fuel cell applications. (2009) (454)
Stability of platinum based alloy cathode catalysts in PEM fuel cells (2006) (434)
Characterization of Sol‐Gel‐Derived Cobalt Oxide Xerogels as Electrochemical Capacitors (1998) (429)
Mathematical modeling of the capacity fade of Li-ion cells (2003) (401)
Development of high performance carbon composite catalyst for oxygen reduction reaction in PEM Proton Exchange Membrane fuel cells (2008) (396)
A review of gas diffusion layer in PEM fuel cells: Materials and designs (2012) (386)
Nitrogen-modified carbon-based catalysts for oxygen reduction reaction in polymer electrolyte membrane fuel cells (2009) (383)
Development of non-precious metal oxygen-reduction catalysts for PEM fuel cells based on N-doped ordered porous carbon (2009) (375)
Cycle Life Modeling of Lithium-Ion Batteries (2004) (367)
A generalized cycle life model of rechargeable Li-ion batteries (2006) (307)
Determination of the Lithium Ion Diffusion Coefficient in Graphite (1999) (300)
Capacity fade of Sony 18650 cells cycled at elevated temperatures. Part II. Capacity fade analysis (2002) (283)
Studies of oxygen reduction reaction active sites and stability of nitrogen-modified carbon composite catalysts for PEM fuel cells (2010) (283)
Capacity fade of Sony 18650 cells cycled at elevated temperatures: Part I. Cycling performance (2002) (268)
Characterization of hydrous ruthenium oxide/carbon nanocomposite supercapacitors prepared by a colloidal method (2002) (264)
Synthesis and Characterization of MnO2-Based Mixed Oxides as Supercapacitors (2003) (251)
Studies on Capacity Fade of Lithium-Ion Batteries (2000) (248)
Effect of carbon loading in microporous layer on PEM fuel cell performance (2006) (205)
Effect of PTFE content in microporous layer on water management in PEM fuel cells (2008) (203)
Durability study of Pt3Ni1 catalysts as cathode in PEM fuel cells (2004) (202)
Electrochemical Investigations of Cobalt-Doped LiMn 2 O 4 as Cathode Material for Lithium-Ion Batteries (1998) (200)
Activity and stability of non-precious metal catalysts for oxygen reduction in acid and alkaline electrolytes (2010) (191)
A review of the development of nitrogen-modified carbon-based catalysts for oxygen reduction at USC (2011) (186)
Non-precious metal catalysts synthesized from precursors of carbon, nitrogen, and transition metal for oxygen reduction in alkaline fuel cells (2011) (182)
Correlation of Double‐Layer Capacitance with the Pore Structure of Sol‐Gel Derived Carbon Xerogels (1999) (168)
Determination of the hydrogen diffusion coefficient in metal hydrides by impedance spectroscopy (1998) (166)
Effect of Porosity on the Capacity Fade of a Lithium-Ion Battery Theory (2004) (165)
Preparation of PEM fuel cell electrodes using pulse electrodeposition (2004) (163)
Electrocatalytic activity and stability of niobium-doped titanium oxide supported platinum catalyst for polymer electrolyte membrane fuel cells (2010) (151)
Studies on Co-based catalysts supported on modified carbon substrates for PEMFC cathodes (2006) (145)
Modeling Lithium Intercalation of a Single Spinel Particle under Potentiodynamic Control (2000) (140)
Study of polypyrrole graphite composite as anode material for secondary lithium-ion batteries (2002) (136)
A Mathematical Model for a Lithium-Ion Battery/Electrochemical Capacitor Hybrid System (2005) (132)
Synthesis and Characterization of Hydrous Ruthenium Oxide-Carbon Supercapacitors (2001) (128)
Electrochemical investigation of CrO2.65 doped LiMn2O4 as a cathode material for lithium-ion batteries (1998) (122)
Development of carbon-metal oxide supercapacitors from sol-gel derived carbon-ruthenium xerogels (1999) (115)
Electrocatalytic Activity and Stability of Titania-Supported Platinum–Palladium Electrocatalysts for Polymer Electrolyte Membrane Fuel Cell (2012) (115)
Performance of gold-coated titanium bipolar plates in unitized regenerative fuel cell operation (2009) (110)
Development of supported bifunctional oxygen electrocatalysts and corrosion-resistant gas diffusion layer for unitized regenerative fuel cell applications (2012) (107)
Anomalous photovoltaic effect in ferroelectrics (1978) (107)
Titania Supported Platinum Catalyst with High Electrocatalytic Activity and Stability for Polymer Electrolyte Membrane Fuel Cell (2010) (100)
Study of Sn-Coated Graphite as Anode Material for Secondary Lithium-Ion Batteries (2002) (99)
Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance (2011) (99)
A Mathematical Model of an Electrochemical Capacitor with Double‐Layer and Faradaic Processes (1999) (95)
Electrochemical studies of an unsupported PtIr electrocatalyst as a bifunctional oxygen electrode in a unitized regenerative fuel cell (2009) (91)
Modeling the Effects of Electrode Composition and Pore Structure on the Performance of Electrochemical Capacitors (2002) (91)
Comparison of the capacity fade of Sony US 18650 cells charged with different protocols (2003) (90)
Electrochemical synthesis of birnessite-type layered manganese oxides for rechargeable lithium batteries (2008) (85)
Performance optimization of a battery-capacitor hybrid system (2004) (83)
Development of compositionally modulated multilayer Zn–Ni deposits as replacement for cadmium (2007) (82)
Ruthenium-based electrocatalysts for oxygen reduction reaction—a review (2007) (81)
Performance study of commercial LiCoO2 and spinel-based Li-ion cells (2002) (81)
Highly stable Pt and PtPd hybrid catalysts supported on a nitrogen-modified carbon composite for fuel cell application ☆ (2010) (80)
Studies on activated carbon capacitor materials loaded with different amounts of ruthenium oxide (2001) (80)
Calendar life performance of pouch lithium-ion cells (2005) (80)
Mesoporous Tin Oxide as an Oxidation-Resistant Catalyst Support for Proton Exchange Membrane Fuel Cells (2010) (78)
Effect of cathode GDL characteristics on mass transport in PEM fuel cells (2009) (78)
Pitting and Crevice Corrosion (2015) (76)
Experimental and Theoretical Study of Cobalt Selenide as a Catalyst for O2 Electroreduction (2007) (76)
Ni‐Composite Microencapsulated Graphite as the Negative Electrode in Lithium‐Ion Batteries I. Initial Irreversible Capacity Study (2000) (74)
A Mathematical Model of Oxide/Carbon Composite Electrode for Supercapacitors (2003) (72)
Effect of hydrophobicity and pore geometry in cathode GDL on PEM fuel cell performance (2009) (71)
Determination of Transport and Electrochemical Kinetic Parameters of Bare and Copper‐Coated LaNi4.27Sn0.24 Electrodes in Alkaline Solution (1996) (67)
High-durability titanium bipolar plate modified by electrochemical deposition of platinum for unitized regenerative fuel cell (URFC) (2010) (65)
Development of conducting polypyrrole as corrosion-resistant catalyst support for polymer electrolyte membrane fuel cell (PEMFC) application (2009) (64)
Simulation of capacity loss in carbon electrode for lithium-ion cells during storage (2007) (63)
Comparison of corrosion-resistance and hydrogen permeation properties of Zn–Ni, Zn–Ni–Cd and Cd coatings on low-carbon steel (2003) (53)
Galvanostatic Pulse and Pulse Reverse Plating of Nickel‐Iron Alloys from Electrolytes Containing Organic Compounds on a Rotating Disk Electrode (1993) (53)
Ni‐Composite Microencapsulated Graphite as the Negative Electrode in Lithium‐Ion Batteries II: Electrochemical Impedance and Self‐Discharge Studies (2000) (52)
Using Electrochemical Impedance Spectroscopy as a Tool for Organic Coating Solute Saturation Monitoring (1993) (52)
Composite polymer electrolytes reinforced by non-woven fabrics (2004) (52)
Corrosion initiation time of steel reinforcement in a chloride environment—A one dimensional solution (1997) (50)
Stability Study of Nitrogen-Modified Carbon Composite Catalysts for Oxygen Reduction Reaction in Polymer Electrolyte Membrane Fuel Cells (2009) (48)
Mathematical Modeling of Hexavalent Chromium Decontamination from Low Surface Charged Soils (1997) (48)
Studies on Capacity Fade of Spinel-Based Li-Ion Batteries (2002) (47)
Electrodeposition and characterization of Zn‐Mn coatings for corrosion protection (2014) (47)
Simulation of charge–discharge cycling of lithium-ion batteries under low-earth-orbit conditions (2006) (47)
Studies on Electroless Cobalt Coatings for Microencapsulation of Hydrogen Storage Alloys (1998) (47)
Effect of ultra-low Pt loading on mass activity of polymer electrolyte membrane fuel cells (2013) (45)
Optimization of electroless Ni–Zn–P deposition process: experimental study and mathematical modeling (2004) (44)
New Method to Synthesize Highly Active and Durable Chemically Ordered fct-PtCo Cathode Catalyst for PEMFCs. (2017) (44)
Anodic Oxidation of Ethylenediaminetetraacetic Acid on Platinum Electrode in Alkaline Medium (1996) (44)
Corrosion Protection of Steel Using Nonanomalous Ni-Zn-P Coatings (2003) (43)
Electrochemical characterization of a polypyrrole/Co0.2CrOx composite as a cathode material for lithium ion batteries (2003) (43)
Hydrogen Permeation and Hydrogen-Induced Cracking (2018) (42)
Development of Zn–Ni–Cd coatings by pulse electrodeposition process (2006) (41)
Performance of La0.8Sr0.2CoO3 coated NiO as cathodes for molten carbonate fuel cells (2003) (40)
Effect of Sn and Ca doping on the corrosion of Pb anodes in lead acid batteries (2002) (40)
Thermally Stable Gel Polymer Electrolytes (2003) (40)
Theoretical Analysis of Metal Hydride Electrodes Studies on Equilibrium Potential and Exchange Current Density (1998) (39)
Power source research at USC: Development of advanced electrocatalysts for polymer electrolyte membrane fuel cells (2011) (39)
Development of method for synthesis of Pt-Co cathode catalysts for PEM fuel cells (2007) (39)
Comparing Electrochemical Impedance Spectroscopy Methods for Estimating the Degree of Delamination of Organic Coatings on Steel (1992) (38)
Determination of transport and electrochemical kinetic parameters of M-H electrodes (1996) (36)
Application of Porous Electrode Theory on Metal Hydride Electrodes in Alkaline Solution (1996) (36)
Discharge characteristics of silver vanadium oxide cathodes (2006) (36)
Development of ruthenium-based bimetallic electrocatalysts for oxygen reduction reaction (2006) (35)
Cycle life and utilization studies on cobalt microencapsulated AB5 type metal hydride (1999) (34)
Hydrogen-Atom Direct-Entry Mechanism into Metal Membranes (1995) (34)
Mass transport effects on the electrodeposition of iron-nickel alloys at the presence of additives (1995) (33)
Synthesis and characterization of a novel non-chrome electrolytic surface treatment process to protect zinc coatings (2003) (33)
Anodic Behavior of Ti in KOH Solutions Ellipsometric and Micro-Raman Spectroscopy Studies (2002) (32)
Hydrogen permeation inhibition by thin layer Zn–Ni alloy electrodeposition (1998) (32)
Synthesis and characterization of bionanoparticle—Silica composites and mesoporous silica with large pores (2009) (32)
Novel PEMFC Cathodes Prepared by Pulse Deposition (2007) (31)
Development of a New Electrodeposition Process for Plating of Zn‐Ni‐X (X = Cd, P) Alloys: I. Corrosion Characteristics of Zn‐Ni‐Cd Ternary Alloys (2000) (30)
Development of catalytically active and highly stable catalyst supports for polymer electrolyte membrane fuel cells (2015) (30)
Study of cobalt-doped lithium-nickel oxides as cathodes for MCFC (2002) (30)
Characterization of Hydrogen Permeation Through a Corrosion-Resistant Zinc-Nickel-Phosphorus Alloy (2000) (30)
Electrochemical Characterization of Cobalt-Encapsulated Nickel as Cathodes for MCFC (2002) (30)
Synthesis, characterization and cycling performance of novel chromium oxide cathode materials for lithium batteries (2003) (30)
Anomalous Codeposition of Fe‐Ni Alloys and Fe ‐ Ni ‐ SiO2 Composites under Potentiostatic Conditions Experimental Study and Mathematical Model (1996) (30)
A Mathematical Model for Electroless Copper Deposition on Planar Substrates (1999) (30)
Improved durability of Pt catalyst supported on N-doped mesoporous graphitized carbon for oxygen reduction reaction in polymer electrolyte membrane fuel cells (2017) (29)
Highly Active and Durable Co-Doped Pt/CCC Cathode Catalyst for Polymer Electrolyte Membrane Fuel Cells (2015) (28)
Electrochemical behaviour of titanium(II) and titanium(III) compounds in molten lithium chloride/ potassium chloride eutectic melts (1991) (28)
Electrochemical intercalation of lithium into polypyrrole/silver vanadium oxide composite used for lithium primary batteries (2006) (27)
Development of Ruthenium-Based Catalysts for Oxygen Reduction Reaction (2007) (26)
Palladium-Microencapsulated Graphite as the Negative Electrode in Li-ion Cells (2000) (25)
Highly stable and ordered intermetallic PtCo alloy catalyst supported on graphitized carbon containing Co@CN for oxygen reduction reaction (2020) (24)
Development of a new electrokinetic technique for decontamination of hexavalent chromium from low surface charged soils (1996) (22)
Hybrid cathode catalyst with synergistic effect between carbon composite catalyst and Pt for ultra-low Pt loading in PEMFCs (2017) (22)
Inhibiting Action of Calcium Nitrite on Carbon Steel Rebars (2001) (22)
Effect of Pretreatment on Durability of fct-Structured Pt-Based Alloy Catalyst for the Oxygen Reduction Reaction under Operating Conditions in Polymer Electrolyte Membrane Fuel Cells (2017) (22)
Catalyzed hydrolysis of nerve gases by metal chelate compounds and potentiometric detection of the byproducts. (2000) (22)
Development of tellurium-modified carbon catalysts for oxygen reduction reaction in PEM fuel cells (2008) (21)
Development of an Electroless Method to Deposit Corrosion-Resistant Silicate Layers on Metallic Substrates (2006) (20)
Highly Active Carbon Composite Electrocatalysts for PEM Fuel Cells (2007) (20)
Development of Highly Active and Durable Hybrid Cathode Catalysts for Polymer Electrolyte Membrane Fuel Cells (2014) (20)
Pulverization and Corrosion Studies of Bare and Cobalt-Encapsulated Metal Hydride Electrodes (2000) (19)
A Novel Electrodeposition Process for Plating Zn-Ni-Cd Alloys (2003) (19)
Erratum: A Mathematical Model for a Lithium-Ion Battery/Electrochemical Capacitor Hybrid System [ J. Electrochem. Soc. , 152 , A1682 (2005)] (2006) (19)
The Role of Thallium as a Hydrogen Entry Promoter on Cathodically Polarized HY-130 Steel (1994) (18)
Modeling lithium diffusion in nickel composite graphite (2001) (17)
Performance studies of solid oxide fuel cell cathodes in the presence of bare and cobalt coated E-brite alloy interconnects (2009) (17)
Characterization of Hydrogen Permeation Through Zinc-Nickel Alloys under Corroding Conditions: Mathematical Model and Experimental Study (1998) (17)
Surface Treatment for Mitigation of Hydrogen Absorption and Penetration into AISI 4340 Steel (1993) (17)
Electrochemical Reduction of Molybdenum(VI) Compounds in Molten Lithium Chloride‐Potassium Chloride Eutectic (1973) (17)
Basics of Corrosion Measurements (2015) (17)
Development of highly-active and stable Pt/C catalyst for polymer electrolyte membrane fuel cells under simulated start-up/shut-down cycling (2016) (17)
Capacity Fade Analysis of a Battery/Super Capacitor Hybrid and a Battery under Pulse Loads – Full Cell Studies (2005) (16)
Electrochemical investigations of bare and Pd-coated LaNi4.25Al0.75 electrodes in alkaline solution (1998) (16)
The Anomalous Photovoltaic Effect and Photoconductivity in Ferroelectric (1978) (16)
Analysis of the Effect of Pt Loading on Mass and Specific Activity in PEM Fuel Cells (2013) (16)
Determination of Corrosion Properties of Lacquered Tinplate in Citrate Solutions by DC and AC Electrochemical Methods (1990) (15)
Electrochemical Reduction of Chromate in the Presence of Nickel Chloride in Molten Lithium Chloride‐Potassium Chloride Eutectic (1970) (15)
Electrochemical Kinetics of Corrosion (2015) (15)
Development of a Novel Electrochemical Method to Deposit High Corrosion Resistant Silicate Layers on Metal Substrates (2003) (15)
Full Cell Mathematical Model of a MCFC (2003) (15)
Impact of Ultra-low Platinum loading on Mass Activity and Mass Transport in H2-Oxygen and H2-Air PEM Fuel Cells (2014) (15)
Use of Underpotential Deposition of Zinc to Mitigate Hydrogen Absorption into Monel K500 (1994) (14)
Analysis of Molten Carbonate Fuel Cell Performance Using a Three-Phase Homogeneous Model (2003) (14)
Characterizing corrosion properties of graphene barrier layers deposited on polycrystalline metals (2020) (14)
Evaluation of Corrosion (2015) (13)
Chromium Oxides and Lithiated Chromium Oxides. Promising Cathode Materials for Secondary Lithium Batteries (1999) (13)
Effect of temperature on performanceof LaNi4.76Sn0.24 metal hydride electrode’ (1997) (13)
Cathodic protection of pipelines (2005) (13)
Ellipsometric and Raman Spectroscopic Study of Thermally Formed Films on Titanium (1997) (13)
Studies on metal hydride electrodes with different weights and binder contents (1999) (13)
The Anomalous Photovoltaic Effect and Photoconductivity in Ferroelectrics (1978) (13)
Chapter 8 – Hydrogen Permeation and Hydrogen-Induced Cracking (2015) (13)
Preparation and Characterization of Pt/NbTiO2 Cathode Catalysts for Unitized Regenerative Fuel Cells (URFCs). (2008) (13)
The photoconductivity and photovoltaic effect in PbTiO3 (1978) (13)
Capacity fade of Li-ion cells cycled at different temperatures (2002) (13)
Galvanostatic pulse and pulse reverse plating of zinc–nickel alloys from sulfate electrolytes on a rotating disc electrode (1996) (12)
STUDIES ON GALVANIZED CARBON STEEL IN CA(OH)2 SOLUTIONS (2000) (12)
Development of High Durability Bi-functional Oxygen Electrode for Unitized Regenerative Fuel Cell (URFC) (2009) (12)
The underpotential deposition of zinc for mitigation of hydrogen absorption and penetration into HY-130 steel (1994) (12)
Cobalt doped chromium oxides as cathode materials for secondary lithium batteries (1999) (12)
Solution equilibrium characteristics of electroless copper deposition on thermally-activated palladium-catalysed polyimide substrates (1998) (11)
The Effects of Organic Compounds on Inhibition of Hydrogen Permeation Through a Mild Steel Membrane (1997) (11)
Effect of anomalous bulk photovoltage in ferroelectrics (1977) (11)
Comparison of Mechanical, Corrosion, and Hydrogen Permeation Properties of Electroless Ni-Zn-P Alloys with Electrolytic Zn-Ni and Cd Coatings (2003) (11)
Development of Novel Method for Preparation of PEMFC Electrodes (2008) (11)
Electroplating of Thin Films of Bismuth onto Type 4340 Steel and Alloy 718 to Prevent Hydrogen Embrittlement (1995) (11)
A Novel Electrochemical Method for the Detection of Nerve Gases (1999) (10)
Electrochemical Investigations of Cobalt-Doped LiMn2O4 as Cathode Material for Lithium-Ion Batteries. (2010) (10)
The photovoltaic and photorefractive effects in KDP-type ferroelectrics (1978) (10)
Development of a Full Layer Pore-Scale Model for the Simulation of Electro-Active Material Used in Power Sources (2014) (10)
Chapter 14 – Corrosion Inhibitors (2015) (10)
Organic Compounds as Effective Inhibitors for Hydrogen Permeation of Type 1010 Steel (1998) (10)
Electrochemical performance of polypyrrole/silver vanadium oxide composite cathodes in lithium primary batteries (2008) (9)
Electrodeposition of alloys and composites with superior corrosion and electrocatalytic properties (2004) (9)
Durability study of Pt 3 Ni 1 catalysts as cathode in PEM fuel cells (2004) (9)
The Effects of Multiple Electroplated Zinc Layers on the Inhibition of Hydrogen Permeation Through an Iron Membrane (1996) (8)
Development of Supported Bifunctional Oxygen Electrocatalysts with High Performance for Unitized Regenerative Fuel Cell Applications (2010) (8)
Development of Nitrogen-Modified Carbon-Based Catalysts for Oxygen Reduction in PEM Fuel Cells (2008) (8)
Effect of membrane-electrode-assembly configuration on proton exchange membrane fuel cell performance (2014) (8)
Reduction of Chromium (VI) when Solar Selective Black Chromium is Deposited in the Presence of Organic Additive (1992) (8)
Electrodeposition of iron-nickel alloys in the presence of organic additives (1994) (7)
Capacity fade studies on spinel based Li-ion cells (2002) (7)
Development of ultra–low highly active and durable hybrid compressive platinum lattice cathode catalysts for polymer electrolyte membrane fuel cells (2017) (7)
Review—Development of Highly Active and Durable Hybrid Compressive Platinum Lattice Catalysts for Polymer Electrolyte Membrane Fuel Cells: Mathematical Modeling and Experimental Work (2020) (6)
Electrochemical Studies of Unsupported PtIr Electrocatalyst as Bi-Functional Oxygen Electrode in Unitized Regenerative Fuel Cells (URFCs) (2008) (6)
Surface Treatment for Inhibition of Corrosion and Hydrogen Penetration of Type 718 Alloy (1994) (6)
Development of Nitrogen-Modified Carbon-Based Catalysts for Oxygen Reduction at USC. (2011) (6)
Surface treatment for mitigation of hydrogen absorption and penetration into AISI 4340 steel and Inconel 718 alloy (1995) (6)
Impedance Spectroscopy as a Nondestructive Health Interrogation Tool for Lithium‐BCX Cells (1993) (6)
Catalyzed decomposition of nerve gases and potentiometric detection of the byproducts (2001) (6)
Electrochemical Reduction of Molybdate in the Presence of Zinc Chloride in Molten Lithium Chloride‐Potassium Chloride Eutectic (1975) (6)
Sol-gel derived carbon aerogels and xerogels for use as the anode in the lithium ion battery (1999) (5)
Development of Novel Metal Oxide Supported Pt catalysts for Polymer Electrolyte Membrane and Unitized Regenerative Fuel Cells Applications (2009) (5)
Hydrogen at surface and interfaces : proceedings of the international symposium (2000) (5)
Performance studies of bare and Co-plated titanium alloy as cathode current collector in Molten Carbonate Fuel Cell (MCFC) (2007) (5)
Stress Corrosion Cracking (2015) (5)
Electrodeposition & characterization of a corrosion resistant zinc-nickel-phosphorus alloy (1999) (5)
Electrochemical Reduction of Indium (III) in Molten Lithium Chloride - Potassium Chloride Eutectic (1987) (4)
Recent Advances in Nonprecious Metal Catalysts for Oxygen Reduction Reaction in Fuel Cells (2010) (4)
High-Temperature Corrosion (2015) (4)
Chapter 6 – Galvanic Corrosion (2015) (4)
Electrodeposition of Ni-Cr-P alloys in the presence of additives (1992) (4)
Development of Ultra-Low Pt Alloy Cathode Catalyst for PEM Fuel Cells (2011) (4)
Development of Carbon-Metal Oxide Supercapacitors from Sol-Gel Derived Carbon-Ruthenium Xerogels. (2000) (4)
Chapter 13 – Organic Coatings (2015) (4)
Temperature and spectral dependence of the photovoltaic current in ferroelectrics (1978) (4)
Corrosion of Structural Concrete (2015) (4)
Development of Zn-Mn Alloy Based Sacrificial Coatings (2013) (4)
Chapter 4 – Passivity (2015) (4)
Non-Noble Metal Catalyst for Oxygen Reduction Reaction in Acidic Medium (2006) (3)
Effect of Gas Diffusion Layer Structure on the Performance of Polymer Electrolyte Membrane Fuel Cell (2017) (3)
Thermodynamics in the Electrochemical Reactions of Corrosion (2015) (3)
Corrosion Effects of Stabilized Backfill on Steel Reinforcement (1998) (3)
Capacity fade of Li-ion cells: comparison of DC and ENREV charging protocols (2000) (3)
Titanium Dioxide-Supported Platinum Catalysts (2011) (3)
MODELING AND APPLICATION STUDIES OF AN ELECTROCHEMICAL HYBRID SYSTEM (2008) (2)
Effect of PTFE Content in Microporous Layer on Water Management (2007) (2)
Effects of thermal treatments on the hydrophobicity and anticorrosion properties of as-grown graphene coatings (2021) (2)
EÄect of temperature on performance of LaNi 4.76 Sn 0.24 metal hydride electrode (1997) (2)
Review—Development of Highly Active and Stable Catalyst Supports and Platinum–Free Catalysts for PEM Fuel Cell (2022) (2)
Fundamental Modeling of Chloride Diffusion in Concrete (1996) (2)
Analyzing the Effect of Ultra-Low Pt Loading on Mass and Specific Activity of PEM Fuel Cells (2013) (2)
VII.C.2 Novel Non-Precious Metal Catalysts for PEMFC: Catalyst Selection through Molecular Modeling and Durability Studies (2007) (2)
A study of the stability of Ni-Cr-P plating solutions (1992) (2)
Development of Stable Pt-Co Cathode Catalysts for PEM Fuel Cells (2007) (2)
Chapter 10 – Atmospheric Corrosion (2015) (2)
Anomalous effect of drag of photovoltaic electrons by light in linbo3:Fe crystals (1982) (2)
Chapter 24 – Cathodic protection of pipelines (2005) (2)
Novel Non-Precious Metals for PEMFC: Catalyst Selection Through Molecular Modeling and Durability Studies (2004) (1)
Discharge Characteristics of Polypyrrole/Silver Vanadium Oxide Composite Used for Lithium Primary Batteries (2007) (1)
Performance of La 0 . 8 Sr 0 . 2 CoO 3 coated NiO as cathodes for molten carbonate fuel cells (2003) (1)
Development of Ultra-Low Platinum Alloy Cathode Catalysts for PEM Fuel Cells (2016) (1)
Development of a New Electrodeposition Process for Plating of Zn-NiX ( X = Cd , P ) Alloys : Permeation Characteristics of Zn-NiCd Ternary Alloys (2019) (1)
Electrodeposition Modeling of Nickel-Iron Alloys in the Presence of Organic Additives (2003) (1)
Nanostructured Zn-Ni Alloys by Pulse Electrodeposition (2018) (1)
The influence of the anomalous photovoltaic effect on the exoelectron emission in LiNbO3 (1978) (1)
Anodic oxidation of tetrasodium ethylenediaminetetraacetic acid in alkaine solutions (1995) (1)
Equilibrium characteristics of tartrate and EDTA-based electroless copper deposition baths (1997) (1)
Cell Mathematical Model of a MCFC (2003) (1)
Development of carbon metal oxide supercapacitors by electroless deposition (1999) (1)
Sol-gel derived carbon-ruthenium xerogels for use as electrochemical capacitors (1999) (1)
Invited) Development of Highly Active and Durable Hybrid Compressive Platinum for Polymer Electrolyte Membrane (PEM) Fuel Cells at USC (2018) (1)
Development of ultra-low loading Pt alloy cathode catalyst for PEM fuel cells (2013) (1)
Chapter 15 – Cathodic Protection (2015) (1)
A Novel Approach to Deposit Compositionally Modulated Zn-Ni Multilayer as a Replacement for Cadmium Coating (2006) (1)
Development of Low Pt Loading Cathode Catalysts for Polymer Electrolyte Membrane Fuel Cells (2010) (1)
Highly Active Ruthenium Based Catalysts for Oxygen Reduction Reaction (2006) (1)
Stability Study of Carbon-Based Catalysts for Oxygen Reduction Reaction in Polymer Electrolyte Membrane Fuel Cells (2009) (1)
Electrochemical Intercalation of Lithium into Silver Vanadium Oxides Used for Primary Batteries (2006) (0)
A vacuum-UV source employing an electron beam and a supersonic gas jet (1967) (0)
Optimization of nanostructured hydrous RuO 2/carbon supercapacitor (2001) (0)
Invited) Development of Highly Active and Durable Hybrid Compressive Platinum Lattice Cathode Catalyst for Polymer Electrolyte Membrane (PEM) Fuel Cells at USC (2018) (0)
ELECTROCHEMICAL REDUCTION OF MOLYBDATE IN THE PRESENCE OF ZINC CHLORIDE IN MOLTEN LITHIUM CHLORIDE-POTASSIUM CHLORIDE EUTECTIC (1976) (0)
Synthesis and characterization of chromium oxides and cobalt doped chromium oxides as cathode materials for lithium batteries (1999) (0)
Life Cycle Analysis of Lithium-Ion Batteries under Low-Earth-Orbit Cycling Conditions (2010) (0)
Development of Highly Active and Stable Compressive Pt Cathode Catalyst for Pemfcs (2016) (0)
Title : Optimization of the Cathode Long-Term Stability in Molten Carbonate Fuel Cells : Experimental Study and Mathematical Modeling Type of Report : Semiannual Progress Report Reporting Period Start Date : April 1 , 2001 Reporting Period End (2002) (0)
CORROSION EFFECTS OF CEMENT STABILIZED BACKFILL ON GALVANIZED STEEL EARTH REINFORCEMENTS. FINAL REPORT (1994) (0)
ALLOYS IN THE PRESENCE OF ORGANIC ADDITIVES (2003) (0)
Development of Novel Metal Oxide Supported Pt Catalysts for Proton Exchange Membrane and Unitized Regenerative Fuel Cells Applications (2009) (0)
Surface Treatment of Hydrogen Absorption Into Alloys (1993) (0)
Synthesis and Characterization of Pulse Electrodeposited Zn-Ni Alloys (0)
Novel Silica Based Coatings as a Substitute for Chrome Passivates (2006) (0)
Electrochemical Synthesis of Manganese Oxides with a Layered Crystal Structure for Lithium Batteries (2008) (0)
Development of Composite Polymer Based Catalyst Support for Bi-functional Oxygen Electrode (BOE) (2008) (0)
Comparison of Capacity Fade of Sony 18650 Cells Charged with Different Charging Protocols (2010) (0)
Erratum: Development of a Full Layer Pore-Scale Model for the Simulation of Electro-Active Material Used in Power Sources [J. Electrochem. Soc., 161, E3235 (2014)] (2014) (0)
Evaluation of Durability and Catalytic Activity of Different Pt Oxygen Electrocatalysts (0)
Development of Carbon Based Metal-free Electrocatalysts for Polymer Electrolyte Membrane Fuel Cells (PEMFCs). (2008) (0)
Effect of magnetic field on the photovoltaic and photocurrent in piezoelectric ZnS (1982) (0)
Modeling Self Discharge Capacity Loss of the Anode in a Lithium ion Cell (2006) (0)
Characterization of Sol-Gel-Derived Cobalt Oxide Xerogels as Electrochemical Capacitors. (1999) (0)
Comparison of Modeling Prediction with Experimental Cycle Life Data (2004) (0)
Reduction of Chromium(VI) When Solar Selective Black Chromium is Deposited in the Presence of Organic Additive. (1992) (0)
A Mathematical Model of Composite Electrode for Supercapacitors (2002) (0)
Development of high performance metal hydride alloys by cobalt microencapsulation (1999) (0)
Development of novel cathode materials for Li-ion batteries (1998) (0)
SECONDARY EMISSION OF BARIUM ACTIVATED THORIUM OXIDE (1958) (0)
Electrodeposition of Fe-ni-si02 Alloys M 4 Department of Chemical Engineering (0)
A MATHEMATICAL MODEL FOR ELECTRODEPOSITION OF FeNi-SiOZ COMPOSITES (2002) (0)
DOE Award No. DE-FC36-03GO13108 NOVEL NON-PRECIOUS METAL CATALYSTS FOR PEMFC: CATALYST SELECTION THROUGH MOLECULAR MODELING AND DURABILITY STUDIES Final Report (September 2003 – October 2008) (2009) (0)
Effect of Hydrophobic and Structural Properties of GDL on PEM Fuel Cell Performance (2008) (0)
Underpotential Deposition of Zinc for Mitigation of Hydrogen Absorption and Penetration into HY-130 Steel. (1995) (0)
THERMOELECTRIC EMISSION OF W-Hf AND W-Ti ALLOYS AND EFFECTS OF OXYGEN PRESSURE ON IT (1962) (0)
Water-repellent emulsion for impregnation of textile materials of different nature (1993) (0)
Capacity Fade Analysis of Lithium-Ion Batteries under Low-Earth-Orbit Cycling Protocols (2008) (0)
Modeling Cycle Life of A Rechargeable Li- ion Battery:Theory (2004) (0)
Electrodeposited Zn-Sn Alloy as a Replacement for Cadmium Coatings (2006) (0)
Cementation of Copper from acidic sulfate electrolytes on nickel-plated steel (1991) (0)
itrogen-modified carbon-based catalysts for oxygen reduction reaction in olymer electrolyte membrane fuel cells (2009) (0)
Anodic Behavior of Titanium in the Presence of Titanium(III) Chloride in Molten Lithium Chloride-Potassium Chloride Eutectic Melts (1992) (0)
Synthesis and Characterization of Sri-Coated SFG 1 O Graphites as Negative Electrodes in Li-Ion Cells (2000) (0)
Synthesis, Characterization and Testing of Novel Anode and Cathode Materials for Li-Ion Batteries (2002) (0)
Surface Treatment for Inhibition of Corrosion and Mitigation of Hydrogen Absorption into Inconel 718. Number 2 (1993) (0)
Development of Ultra-Low Loading Pt Hybrid Catalyst for PEM Fuel Cells (2013) (0)
Prediction of Volumetric, Specific Energy and Power Density of High-Capacity Thin Layer Battery Electrodes By Using a Novel Multi-Scale Modelling Framework (2014) (0)
Development of Advanced Catalysts and Supports for PEM Fuel Cell Application (2008) (0)
Mathematical model of a NiOOH/metal hydride cell. Final report, September 15, 1993--November 14, 1996 (1996) (0)
Development of Hybrid Cathode Catalyst for PEM Fuel Cells (2013) (0)
Comparison of Model Predictions with Experimental Data from Lithium-ion Battery/Electrochemical Capacitor Hybrid System (2006) (0)
Erratum: “Application of Porous Electrode Theory on Metal Hydride Electrodes in Alkaline Solution,” [J. Electrochem. Soc., 143, 435 (1996)] (1996) (0)
Author's Guide (1984) (0)
Development of Highly Active Pt2Ni/CCC Catalyst for PEM Fuel Cell (2013) (0)
Development of Non-Precious Metal Catalysts for Oxygen Reduction Reaction in Fuel Cells with High Activity and Stability (2011) (0)
Chromium Oxides and Lithiated Chromium Oxides. Promising Cathode Materials for Secondary Lithium Batteries. (1999) (0)
Development of Novel Process for the Deposition of Nanostructured Ternary Alloys and Composites for Replacement of Cadmium Coatings (2003) (0)
Bimetallic Chelate Catalysts for Oxygen Reduction Raction in PEM Fuel Cells (2006) (0)
Performance Studies of SOFC Cathodes in the Presence of Bare and Coated Metallic Interconnects (2000) (0)
Optimization of Cobalt Doped Chromium Oxide as Cathode Material for Secondary Lithium Batteries (1999) (0)
EVALUATION OF ECONOMICAL AND EFFICIENT METHOD FOR CORROSION PROTECTION OF STRUCTURAL CONCRETE (2001) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Branko N. Popov?

Branko N. Popov is affiliated with the following schools:

Branko N. Popov's Academic­Influence.com Rankings

Branko N. Popov's Degrees

Why Is Branko N. Popov Influential?

Branko N. Popov's Published Works

Published Works

What Schools Are Affiliated With Branko N. Popov?

Branko N. Popov's AcademicInfluence.com Rankings