Britt-Marie Steenari | Academic Influence

Britt-Marie Steenari's Published Works

Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques (329)
High-temperature reactions of straw ash and the anti-sintering additives kaolin and dolomite (239)
Characterization of ashes from wood and straw (195)
REE Recovery from End-of-Life NdFeB Permanent Magnet Scrap: A Critical Review (181)
Evaluation of the leaching characteristics of wood ash and the influence of ash agglomeration (179)
Stabilisation of biofuel ashes for recycling to forest soil. (176)
Solid fuels in chemical-looping combustion using oxide scale and unprocessed iron ore as oxygen carriers (156)
Investigation of Ash Sintering during Combustion of Agricultural Residues and the Effect of Additives (151)
Chemical and leaching characteristics of ash from combustion of coal, peat and wood in a 12 MW CFB – a comparative study (140)
Removal of hazardous metals from MSW fly ash--an evaluation of ash leaching methods. (125)
Countermeasures against alkali-related problems during combustion of biomass in a circulating fluidized bed boiler (124)
A kinetic study of gaseous alkali capture by kaolin in the fixed bed reactor equipped with an alkali detector (119)
Two strategies to reduce gaseous KCl and chlorine in deposits during biomass combustion — injection of ammonium sulphate and co-combustion with peat (114)
Application of chemical fractionation methods for characterisation of biofuels, waste derived fuels and CFB co-combustion fly ashes (113)
Adsorption of Cd, Cu, Ni, Pb and Zn on Sphagnum peat from solutions with low metal concentrations. (100)
Release of salts from municipal solid waste combustion residues. (86)
Leaching optimization of municipal solid waste incineration ash for resource recovery: A case study of Cu, Zn, Pb and Cd. (82)
Leaching of ashes from co-combustion of sewage sludge and wood, Part I: Recovery of phosphorus (79)
Chemical fractionation for the characterisation of fly ashes from co-combustion of biofuels using different methods for alkali reduction (75)
Fly ash characteristics in co-combustion of wood with coal, oil or peat (74)
Kaolin Addition during Biomass Combustion in a 35 MW Circulating Fluidized-Bed Boiler (60)
Long term leaching of stabilised wood ash (56)
Addition of kaolin as potassium sorbent in the combustion of wood fuel – Effects on fly ash properties (52)
Capture of Potassium and Cadmium by Kaolin in Oxidizing and Reducing Atmospheres (50)
Analysis of the metal content of small-size Waste Electric and Electronic Equipment (WEEE) printed circuit boards—part 1: Internet routers, mobile phones and smartphones (48)
A study of Cr(VI) in ashes from fluidized bed combustion of municipal solid waste: leaching, secondary reactions and the applicability of some speciation methods. (47)
Leaching of ashes from co-combustion of sewage sludge and wood-Part II: The mobility of metals during phosphorus extraction (46)
Direct determination of cadmium speciation in municipal solid waste fly ashes by synchrotron radiation induced mu-X-ray fluorescence and mu-X-ray absorption spectroscopy. (40)
On the application of surface ionization detector for the study of alkali capture by kaolin in a fixed bed reactor (39)
Recovery of indium and yttrium from Flat Panel Display waste using solvent extraction (39)
The Effect of Bituminous and Lignite Ash on the Performance of Ilmenite as Oxygen Carrier in Chemical‐Looping Combustion (37)
Separation of Heavy Rare-Earth Elements from Light Rare-Earth Elements Via Solvent Extraction from a Neodymium Magnet Leachate and the Effects of Diluents (36)
Ash sintering and deposit formation in PFBC (33)
Initial studies of the recovery of Cu from MSWI fly ash leachates using solvent extraction (32)
Solvent extraction separation of copper and zinc from MSWI fly ash leachates. (32)
ALTERNATIVE MATERIALS FOR ADSORPTION OF HEAVY METALS AND PETROLEUM HYDROCARBONS FROM CONTAMINATED LEACHATES (32)
Production of zinc and manganese oxide particles by pyrolysis of alkaline and Zn-C battery waste. (31)
Assessment of metal mobility in MSW incineration ashes using water as the reagent (31)
Composition of agglomerates in fluidized bed reactors for thermochemical conversion of biomass and waste fuels Experimental data in comparison with predictions by a thermodynamic equilibrium model (30)
Leaching for recovery of copper from municipal solid waste incineration fly ash: Influence of ash properties and metal speciation (27)
Treatment process for MSW combustion fly ash laboratory and pilot plant experiments. (27)
Cd speciation in biomass fly ash particles after size separation by centrifugal SPLITT (25)
Characterization and Leaching of Neodymium Magnet Waste and Solvent Extraction of the Rare-Earth Elements Using TODGA (25)
X-ray fluorescence tomography of individual municipal solid waste and biomass fly ash particles. (25)
Comparative study of the application of traditional and novel extractants for the separation of metals from MSWI fly ash leachates (24)
Chemical Properties of FBC Ashes (23)
Leaching and recovery of rare-earth elements from neodymium magnet waste using organic acids (23)
Mixer-settler system for the recovery of copper and zinc from MSWI fly ash leachates: An evaluation of a hydrometallurgical process (23)
Hydrometallurgical processes for recovery of valuable and critical metals from spent car NiMH batteries optimized in a pilot plant scale (22)
Element associations in ash from waste combustion in fluidized bed. (20)
The solvent extraction of rare earth elements from nitrate media with novel polyamides containing malonamide groups (20)
Evaluation of High-Temperature Chlorination as a Process for Separation of Copper, Indium and Gallium from CIGS Solar Cell Waste Materials (19)
Highly efficient recovery and clean-up of four heavy metals from MSWI fly ash by integrating leaching, selective extraction and adsorption (19)
Investigation of the effects of thermal treatment on the leachability of Zn and Mn from discarded alkaline and Zn-C batteries (16)
Thermogravimetric combined with mass spectrometric studies on the oxidation of calcium sulfide (15)
Chemical Transformations in Li-Ion Battery Electrode Materials by Carbothermic Reduction (15)
Assessment of copper and zinc recovery from MSWI fly ash in Guangzhou based on a hydrometallurgical process. (14)
Determination of the Cd-bearing phases in municipal solid waste and biomass single fly ash particles using SR-microXRF spectroscopy. (14)
Synchrotron radiation induced μ-X-ray fluorescence spectroscopy on municipal solid waste fly ashes (14)
Leaching behavior and possible resource recovery from air pollution control residues of fluidized bed combustion of municipal solid waste (12)
What is required for the viability of metal recovery from municipal solid-waste incineration fly ash? - Design and assessment of a process plant for copper extraction (11)
Incineration of EV Lithium-ion batteries as a pretreatment for recycling - Determination of the potential formation of hazardous by-products and effects on metal compounds. (11)
Investigation of zinc recovery by hydrogen reduction assisted pyrolysis of alkaline and zinc-carbon battery waste. (11)
The impact of zeolites during co-combustion of municipal sewage sludge with alkali and chlorine rich fuels (10)
Investigation of the kinetics and the morphology of cementation products formed during purification of a synthetic zinc sulfate electrolyte (10)
Effects of gas flow rate on zinc recovery rate and particle properties by pyrolysis of alkaline and zinc-carbon battery waste (10)
Speciation of Copper in Ash from a Fluidized-Bed Boiler Fired with Municipal Solid Waste (10)
Microextended X-ray absorption fine structure studies of cadmium speciation within single municipal solid waste fly ash particles. (10)
Strategies for Sustainable and Circular Management of Phosphorus in the Baltic Sea Region: The Holistic Approach of the InPhos Project (10)
Investigations into Recycling Zinc from Used Metal Oxide Varistors via pH Selective Leaching: Characterization, Leaching, and Residue Analysis (10)
Reaction between limestone and SO2 under conditions alternating between oxidizing and reducing. The effect of short cycle times (9)
Recovery of industrial valuable metals from household battery waste (9)
Drying of granulated wood ash by flue gas from saw dust and natural gas combustion. (9)
Evaluating two test methods used for characterizing leaching properties. (8)
Calcium sulphide formation in fluidized bed boilers (8)
X-ray fluorescence tomography of individual waste fly ash particles (7)
Investigation of an Electrochemical Method for Separation of Copper, Indium, and Gallium from Pretreated CIGS Solar Cell Waste Materials (7)
The Effect of Calcination on the Reactions of Ammonia over Different Carbonates and Limestones in Fluidized Bed Combustion Conditions (6)
Characterization of paint formulated using secondary TiO2 pigments recovered from waste paint (6)
Characterisation of silicon, zirconium and aluminium coated titanium dioxide pigments recovered from paint waste (5)
Surface properties of recycled titanium oxide recovered from paint waste (5)
Leaching of Phosphorus From Ashes of Co-Combustion of Sewage Sludge and Wood (5)
Major challenges and opportunities in silicon solar module recycling (5)
Reaction between limestone and SO2 under conditions alternating between oxidizing and reducing. The effect of the SO2 concentration (5)
Controlling the Composition and Magnetic Properties of Nano-SrFe12O19 Powder Synthesized from Oily Cold Mill Sludge by the Citrate Precursor Method (5)
Recovery of Antimony: A Laboratory Study on the Thermal Decomposition and Carbothermal Reduction of Sb(III), Bi(III), Zn(II) Oxides, and Antimony Compounds from Metal Oxide Varistors (5)
Recycling Zinc from Metal Oxide Varistors Through Leaching and Cementation of Cobalt and Nickel (4)
Source analysis of municipal solid waste in a mega-city (Guangzhou): Challenges or opportunities? (4)
Comprehensive treatments of tungsten slags in China: A critical review. (4)
Influence of periodically changing CO2 partial pressure on sulfur capture and free lime content of residues in PFBC (4)
Potential metal resources in waste incineration ash deposits (3)
Temperature effect on the distribution of lanthanides(III) in the perchlorate-malonamide-methyl isobutyl ketone systems (3)
DR-FTIR method for the study of early hydration of cement (3)
Recycling of CIGS Solar Cell Waste Materials: Separation of Copper, Indium, and Gallium by High-Temperature Chlorination Reaction with Ammonium Chloride (3)
Comparison of the effects of incineration, vacuum pyrolysis and dynamic pyrolysis on the composition of NMC-lithium battery cathode-material production scraps and separation of the current collector (3)
Recovery of phosphorous from industrial waste water by oxidation and precipitation (3)
Agglomeration of the Bed Material in Fluidized Bed Reactors for Thermal Conversion of Biomass - A Threat for the Development of the Technology (3)
Investigations into high temperature separation of antimony from metal oxide varistors (3)
Recovery of titanium dioxide and other pigments from waste paint by pyrolysis (3)
Possibilities of Ash Speciation with Synchrotron Based X-ray Absorption Spectroscopy (XAS) (3)
Resource recovery from municipal solid waste ash (3)
The Influence of Particle Size and Structure in Hydrated Lime on the Properties of the Lime Putty and Lime Mortar (3)
Preliminary characterization of deposits formed on super heater surfaces in an FBC-boiler fired with municipal solid waste (3)
A method to recreate historic mortars applied at Norrlanda church on the island of Gotland, Sweden (2)
Effect of bed materials mixing on the observed bed sintering (2)
Synthesis and properties of SrFe12O19 obtained by solid waste recycling of oily cold rolling mill sludge (2)
Adsorption materials for removal of heavy metals and petroleum hydrocarbons from contaminated leachates (2)
Capture of Alkali Metals by Kaolin (2)
Coordination of Trivalent Lanthanides with Bismalonamide Ligands: Implications for Liquid–Liquid Extraction (2)
Fly Ash Utilization for the Development of Low NO sub(x Bed Materials (1)
Gas quenching probe and field measurements of gaseous cadmium in a 12-MWth circulating fluidised bed combustion boiler (1)
Phycoremediation of heavy metals (1)
Experimental evaluation of interactions between K, Ca, and P and Mn/Si-based oxygen carriers (1)
Crystal structure and identification of resonance forms of diethyl 2-(3-oxoiso-1,3-dihydrobenzofuran-1-ylidene)malonate (1)
Study of Bed Material Agglomeration in A Horizontal Circulating Fluidized Bed Boiler Burning Rice Husk (0)
Hydrometallurgical technology for recovery of metals from spent car NiMH batteries (0)
A Novel Particle Trap Impactor for Use with the Gas-Quenching Probe Sampling System (0)
Role of K and Ca for catalytic activation of bed material during biomass gasification (0)
Screening of untreated municipal solid waste incineration fly ash for use in cement-based materials: chemical and physical properties (0)
Addition of kaolin as a potassium sorbent in the combustion of wood fuel- effects on leaching of metals from the resulting fly ash (0)
Identification and quantification of chemical forms of Cu and Zn in MSWI ashes using XANES (0)
Speciation of Cu compounds in ashes from MSW incineration (0)
Direct Determination of Cadmium Speciation in MSW and Biomass Single Fly Ash Particles Using SR Based µ-XR Spectroscopy Techniques (0)
A Pyrometallurgical Process to Recover the Zinc and Manganese from Spent Batteries (0)
Use of natural ores and waste materials as oxygen carriers for chemical-looping combustion (0)
Utilization of fly ash from combustion of waste-paper sludge in the removal of divalent metal ions from contaminated waters (0)
Comparative Study: Impacts of Ca and Mg Salts on Iron Oxygen Carriers in Chemical Looping Combustion of Biomass (0)
Valorization of MSWI Fly Ash for Use in Cement Based Materials (0)
Speciation of Cu in ash from a fluidized bed boiler fired with municipal solid waste (0)
Investigation of biomass alkali release in a dual circulating fluidized bed chemical looping combustion system (0)
Decomposition of NH3 over limestone sorbents and sand materials used in a fluidised bed boiler (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Britt-Marie Steenari?

Britt-Marie Steenari is affiliated with the following schools:

Britt-Marie Steenari's AcademicInfluence.com Rankings