Chang‐yu Shen
#114,902
Most Influential Person Now
Chang‐yu Shen's AcademicInfluence.com Rankings
Chang‐yu Shenengineering Degrees
Engineering
#3442
World Rank
#4521
Historical Rank
Materials Science
#136
World Rank
#138
Historical Rank
Applied Physics
#636
World Rank
#656
Historical Rank
Download Badge
Engineering
Chang‐yu Shen's Degrees
- Bachelors Chemical Engineering National Taiwan University
- Masters Chemical Engineering National Taiwan University
Why Is Chang‐yu Shen Influential?
(Suggest an Edit or Addition)Chang‐yu Shen's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing (2017) (466)
- Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications (2016) (419)
- Electrically conductive strain sensing polyurethane nanocomposites with synergistic carbon nanotubes and graphene bifillers. (2016) (377)
- Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method (2007) (374)
- Electrically conductive polymer composites for smart flexible strain sensors: a critical review (2018) (355)
- Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing (2018) (317)
- Flexible electrically resistive-type strain sensors based on reduced graphene oxide-decorated electrospun polymer fibrous mats for human motion monitoring (2018) (294)
- Multifunctional Magnetic Ti3C2Tx MXene/Graphene Aerogel with Superior Electromagnetic Wave Absorption Performance. (2021) (288)
- Ultrasensitive and Highly Compressible Piezoresistive Sensor Based on Polyurethane Sponge Coated with a Cracked Cellulose Nanofibril/Silver Nanowire Layer. (2019) (284)
- The effect of filler dimensionality on the electromechanical performance of polydimethylsiloxane based conductive nanocomposites for flexible strain sensors (2017) (240)
- Lightweight, Superelastic, and Hydrophobic Polyimide Nanofiber /MXene Composite Aerogel for Wearable Piezoresistive Sensor and Oil/Water Separation Applications (2021) (229)
- A highly stretchable and stable strain sensor based on hybrid carbon nanofillers/polydimethylsiloxane conductive composites for large human motions monitoring (2018) (227)
- Carbon Nanotubes-Adsorbed Electrospun PA66 Nanofiber Bundles with Improved Conductivity and Robust Flexibility. (2016) (227)
- Non-covalently functionalized graphene strengthened poly(vinyl alcohol) (2018) (226)
- High‐Performance Flexible Freestanding Anode with Hierarchical 3D Carbon‐Networks/Fe7S8/Graphene for Applicable Sodium‐Ion Batteries (2019) (211)
- Comparative assessment of the strain-sensing behaviors of polylactic acid nanocomposites: reduced graphene oxide or carbon nanotubes (2017) (205)
- Stretchable conductive nonwoven fabrics with self-cleaning capability for tunable wearable strain sensor (2019) (204)
- Recent Progress on the Alloy-Based Anode for Sodium-Ion Batteries and Potassium-Ion Batteries. (2019) (197)
- Organic vapor sensing behaviors of conductive thermoplastic polyurethane–graphene nanocomposites (2016) (181)
- Superhydrophobic/Superoleophilic Polycarbonate/Carbon Nanotubes Porous Monolith for Selective Oil Adsorption from Water (2018) (180)
- Superhydrophobic Electrically Conductive Paper for Ultrasensitive Strain Sensor with Excellent Anticorrosion and Self-Cleaning Property. (2019) (177)
- Highly Compressible and Robust Polyimide/Carbon Nanotube Composite Aerogel for High-Performance Wearable Pressure Sensor. (2019) (176)
- Flexible and Lightweight Pressure Sensor Based on Carbon Nanotube/Thermoplastic Polyurethane-Aligned Conductive Foam with Superior Compressibility and Stability. (2017) (175)
- Significant Stretchability Enhancement of a Crack-Based Strain Sensor Combined with High Sensitivity and Superior Durability for Motion Monitoring. (2019) (169)
- Flexible multilayered MXene/thermoplastic polyurethane films with excellent electromagnetic interference shielding, thermal conductivity, and management performances (2021) (151)
- Flexible MXene/Silver Nanowires-based Transparent Conductive Film with Electromagnetic Interference Shielding and Electro-photo-thermal Performances. (2020) (151)
- Conductive MXene/cotton fabric based pressure sensor with both high sensitivity and wide sensing range for human motion detection and E-skin (2020) (150)
- Thermoplastic polyurethane-carbon black nanocomposite coating: Fabrication and solid particle erosion resistance (2018) (150)
- Flexible conductive Ag nanowire/cellulose nanofibril hybrid nanopaper for strain and temperature sensing applications. (2020) (148)
- Highly stretchable and durable strain sensor based on carbon nanotubes decorated thermoplastic polyurethane fibrous network with aligned wave-like structure (2019) (145)
- Electrically conductive thermoplastic polyurethane/polypropylene nanocomposites with selectively distributed graphene (2016) (145)
- A comparison between strain sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene electrically conductive composites (2013) (140)
- Superhydrophobic Shish-kebab Membrane with Self-Cleaning and Oil/Water Separation Properties (2018) (136)
- Ultra-Stretchable, durable and conductive hydrogel with hybrid double network as high performance strain sensor and stretchable triboelectric nanogenerator (2020) (134)
- Ultrathin flexible poly(vinylidene fluoride)/MXene/silver nanowire film with outstanding specific EMI shielding and high heat dissipation (2021) (130)
- Conductive thermoplastic polyurethane composites with tunable piezoresistivity by modulating the filler dimensionality for flexible strain sensors (2017) (125)
- Multifunctional flexible carbon black/polydimethylsiloxane piezoresistive sensor with ultrahigh linear range, excellent durability and oil/water separation capability (2019) (117)
- Environment Tolerant Conductive Nanocomposite Organohydrogels as Flexible Strain Sensors and Power Sources for Sustainable Electronics (2021) (111)
- Piezoresistive behavior of porous carbon nanotube-thermoplastic polyurethane conductive nanocomposites with ultrahigh compressibility (2016) (110)
- Ultra-stretchable triboelectric nanogenerator as high-sensitive and self-powered electronic skins for energy harvesting and tactile sensing (2020) (109)
- Superhydrophobic and superoleophilic porous reduced graphene oxide/polycarbonate monoliths for high-efficiency oil/water separation. (2018) (108)
- Transcrystallization behavior at the poly(lactic acid)/sisal fibre biocomposite interface (2011) (108)
- A Highly Sensitive and Stretchable Yarn Strain Sensor for Human Motion Tracking Utilizing a Wrinkle-Assisted Crack Structure. (2019) (105)
- A highly stretchable carbon nanotubes/thermoplastic polyurethane fiber-shaped strain sensor with porous structure for human motion monitoring (2018) (101)
- Flexible and wearable carbon black/thermoplastic polyurethane foam with a pinnate-veined aligned porous structure for multifunctional piezoresistive sensors (2020) (100)
- Facile Fabrication of Superhydrophobic and Eco-Friendly Poly(lactic acid) Foam for Oil-Water Separation via Skin Peeling. (2019) (100)
- Ultrasensitive strain sensor based on superhydrophobic microcracked conductive Ti3C2Tx MXene/paper for human-motion monitoring and E-skin. (2021) (99)
- Pyrite FeS2 microspheres anchoring on reduced graphene oxide aerogel as an enhanced electrode material for sodium-ion batteries (2017) (98)
- Porous Polyethylene Bundles with Enhanced Hydrophobicity and Pumping Oil-Recovery Ability via Skin-Peeling (2018) (93)
- Nonisothermal melt crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites (2004) (92)
- Detection of non-joint areas tiny strain and anti-interference voice recognition by micro-cracked metal thin film (2017) (90)
- High performance wearable strain sensor based on graphene/cotton fabric with high durability and low detection limit. (2019) (89)
- Strain sensing behaviors of epoxy nanocomposites with carbon nanotubes under cyclic deformation (2017) (87)
- Ultra-stretchable, sensitive and durable strain sensors based on polydopamine encapsulated carbon nanotubes/elastic bands (2018) (85)
- Flexible conductive MXene/cellulose nanocrystal coated nonwoven fabrics for tunable wearable strain/pressure sensors (2020) (80)
- Multifunctional stretchable strain sensor based on polydopamine/ reduced graphene oxide/ electrospun thermoplastic polyurethane fibrous mats for human motion detection and environment monitoring (2020) (80)
- Enhanced piezoresistive performance of conductive WPU/CNT composite foam through incorporating brittle cellulose nanocrystal (2020) (79)
- Conductive herringbone structure carbon nanotube/thermoplastic polyurethane porous foam tuned by epoxy for high performance flexible piezoresistive sensor (2017) (79)
- Facile Thermally Impacted Water-Induced Phase Separation Approach for the Fabrication of Skin-Free Thermoplastic Polyurethane Foam and Its Recyclable Counterpart for Oil-Water Separation. (2018) (77)
- Flexible conductive polymer composites for smart wearable strain sensors (2020) (77)
- Effects of melt structure on shear-induced β-cylindrites of isotactic polypropylene (2012) (76)
- Ultra-high initial coulombic efficiency induced by interface engineering enables rapid, stable sodium storage. (2021) (76)
- Nonisothermal crystallization kinetics of poly(lactic acid) formulations comprising talc with poly(ethylene glycol) (2010) (75)
- Three-dimensional CuS hierarchical architectures as recyclable catalysts for dye decolorization (2012) (74)
- A tunable strain sensor based on a carbon nanotubes/electrospun polyamide 6 conductive nanofibrous network embedded into poly(vinyl alcohol) with self-diagnosis capabilities (2017) (74)
- Continuous fabrication of polymer microfiber bundles with interconnected microchannels for oil/water separation (2017) (72)
- Synergetic effect of Fe3O4 nanoparticles and carbon on flexible poly (vinylidence fluoride) based films with higher heat dissipation to improve electromagnetic shielding (2019) (69)
- Design of Helically Double-Leveled Gaps for Stretchable Fiber Strain Sensor with Ultralow Detection Limit, Broad Sensing Range, and High Repeatability. (2019) (69)
- Hierarchical crystalline structure of HDPE molded by gas-assisted injection molding (2007) (68)
- The Cooperative Effect of Both Molecular and Supramolecular Chirality on Cell Adhesion. (2018) (67)
- Effect of phthalimide as an efficient nucleating agent on the crystallization kinetics of poly(lactic acid) (2013) (67)
- Self-reinforcing and toughening isotactic polypropylene via melt sequential injection molding (2018) (67)
- An asymmetric sandwich structural cellulose-based film with self-supported MXene and AgNW layers for flexible electromagnetic interference shielding and thermal management. (2021) (66)
- 3D hierarchically patterned tubular NiSe with nano-/microstructures for Li ion battery design. (2012) (66)
- Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM (2018) (65)
- Ultrastretchable Multilayered Fiber with a Hollow-Monolith Structure for High-Performance Strain Sensor. (2018) (65)
- Continuously fabricated transparent conductive polycarbonate/carbon nanotube nanocomposite films for switchable thermochromic applications (2018) (65)
- A flexible and self-formed sandwich structure strain sensor based on AgNW decorated electrospun fibrous mats with excellent sensing capability and good oxidation inhibition properties (2017) (64)
- Simple fabrication of superhydrophobic PLA with honeycomb-like structures for high-efficiency oil-water separation (2020) (64)
- Effects of aligned and random fibers with different diameter on cell behaviors. (2018) (64)
- Mechanical enhancement of melt-stretched β-nucleated isotactic polypropylene: The role of lamellar branching of β-crystal (2017) (63)
- Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth (2022) (62)
- Highly Stretchable, Transparent, and Bio‐Friendly Strain Sensor Based on Self‐Recovery Ionic‐Covalent Hydrogels for Human Motion Monitoring (2019) (62)
- Ultrathin, flexible transparent Joule heater with fast response time based on single-walled carbon nanotubes/poly(vinyl alcohol) film (2019) (62)
- Flexible and thin multifunctional waterborne polyurethane/Ag film for high-efficiency electromagnetic interference shielding, electro-thermal and strain sensing performances (2021) (62)
- Highly stretchable and durable fiber-shaped strain sensor with porous core-sheath structure for human motion monitoring (2020) (61)
- Multifunctional MXene/CNTs based flexible electronic textile with excellent strain sensing, electromagnetic interference shielding and Joule heating performances (2022) (61)
- Largely improved thermal conductivity of HDPE composites by building a 3D hybrid fillers network (2021) (60)
- Crystallization of poly(lactic acid) accelerated by cyclodextrin complex as nucleating agent (2012) (60)
- Thermal degradation mechanism and kinetics of polycarbonate/silica nanocomposites (2014) (60)
- Facile fabrication of triboelectric nanogenerator based on low-cost thermoplastic polymeric fabrics for large-area energy harvesting and self-powered sensing (2019) (58)
- CdS nanorods/organic hybrid LED array and the piezo-phototronic effect of the device for pressure mapping. (2016) (58)
- Unusual structural evolution of poly(lactic acid) upon annealing in the presence of an initially oriented mesophase. (2014) (58)
- Electrostatic self-assembled NiFe2O4/Ti3C2Tx MXene nanocomposites for efficient electromagnetic wave absorption at ultralow loading level (2021) (58)
- Tuning of vapor sensing behaviors of eco-friendly conductive polymer composites utilizing ramie fiber (2015) (57)
- Crystalline Structure of Injection Molded β-Isotactic Polypropylene: Analysis of the Oriented Shear Zone (2013) (56)
- Ultra-sensitive and durable strain sensor with sandwich structure and excellent anti-interference ability for wearable electronic skins (2020) (55)
- 3D porous nano/micro nickel sulfides with hierarchical structure: controlled synthesis, structure characterization and electrochemical properties. (2013) (55)
- Remarkably anisotropic conductive MWCNTs/polypropylene nanocomposites with alternating microlayers (2019) (55)
- Bioinspired Multifunctional Photonic‐Electronic Smart Skin for Ultrasensitive Health Monitoring, for Visual and Self‐Powered Sensing (2021) (55)
- Ultra‐Stretchable Porous Fiber‐Shaped Strain Sensor with Exponential Response in Full Sensing Range and Excellent Anti‐Interference Ability toward Buckling, Torsion, Temperature, and Humidity (2019) (54)
- Effect of Shear Stress on Crystallization of Isotactic Polypropylene from a Structured Melt (2012) (53)
- Scalable manufacturing of flexible, durable Ti3C2Tx MXene/Polyvinylidene fluoride film for multifunctional electromagnetic interference shielding and electro/photo-thermal conversion applications (2021) (53)
- Enhanced Solid Particle Erosion Properties of Thermoplastic Polyurethane-Carbon Nanotube Nanocomposites (2019) (52)
- Multifunctional and superhydrophobic cellulose composite paper for electromagnetic shielding, hydraulic triboelectric nanogenerator and Joule heating applications (2021) (52)
- Electrospun nanofibrous thermoplastic polyurethane/poly(glycerol sebacate) hybrid scaffolds for vocal fold tissue engineering applications. (2019) (51)
- Facile and scalable synthesis of low-cost FeS@C as long-cycle anodes for sodium-ion batteries (2019) (51)
- Constructing nickel chain/MXene networks in melamine foam towards phase change materials for thermal energy management and absorption-dominated electromagnetic interference shielding (2022) (51)
- Interfacial interaction enhancement by shear-induced β-cylindrite in isotactic polypropylene/glass fiber composites (2016) (51)
- Tunable and Nacre-Mimetic Multifunctional Electronic Skins for Highly Stretchable Contact-Noncontact Sensing. (2021) (50)
- Biodegradable poly(lactic acid) nanocomposites reinforced and toughened by carbon nanotubes/clay hybrids. (2020) (50)
- Segregated conductive polymer composite with synergistically electrical and mechanical properties (2018) (49)
- Heating-induced negative temperature coefficient effect in conductive graphene/polymer ternary nanocomposites with a segregated and double-percolated structure (2017) (49)
- A simple superhydrophobic/superhydrophilic Janus-paper with enhanced biocompatibility by PDMS and candle soot coating for actuator (2021) (49)
- Enhancing Performance of Stretchable and Transparent Triboelectric Nanogenerator by Optimizing Hydrogel Ionic Electrode Property. (2020) (49)
- Effects of interface interaction and microphase dispersion on the mechanical properties of PCL/PLA/MMT nanocomposites visualized by nanomechanical mapping (2020) (48)
- Effect of different sterilization methods on the properties of commercial biodegradable polyesters for single-use, disposable medical devices. (2019) (48)
- Superhydrophobic and superelastic thermoplastic polyurethane/multiwalled carbon nanotubes porous monolith for durable oil/water separation (2020) (47)
- Aligned flexible conductive fibrous networks for highly sensitive, ultrastretchable and wearable strain sensors (2018) (47)
- The effect of nanoclay on the crystallization behavior, microcellular structure, and mechanical properties of thermoplastic polyurethane nanocomposite foams (2016) (46)
- Creep and recovery behavior of injection-molded isotactic polypropylene with controllable skin-core structure (2018) (46)
- Asymmetric layered structural design with segregated conductive network for absorption-dominated high-performance electromagnetic interference shielding (2021) (45)
- Multilayer polyethylene/ hexagonal boron nitride composites showing high neutron shielding efficiency and thermal conductivity (2020) (45)
- Investigation of the Effect of Molding Variables on Sink Marks of Plastic Injection Molded Parts Using Taguchi DOE Technique (2007) (44)
- Electromagnetic interference shielding enhancement of poly(lactic acid)-based carbonaceous nanocomposites by poly(ethylene oxide)-assisted segregated structure: a comparative study of carbon nanotubes and graphene nanoplatelets (2021) (44)
- PVDF-Ni/PE-CNTs Composite Foams with Co-Continuous Structure for Electromagnetic Interference Shielding and Photo-Electro-Thermal Properties (2021) (43)
- Aramid nanofiber-derived carbon aerogel film with skin-core structure for high electromagnetic interference shielding and solar-thermal conversion (2021) (43)
- Fabrication and characterization of injection molded poly (ε-caprolactone) and poly (ε-caprolactone)/hydroxyapatite scaffolds for tissue engineering. (2012) (42)
- Asymmetric Superhydrophobic Textiles for Electromagnetic Interference Shielding, Photothermal Conversion, and Solar Water Evaporation. (2021) (41)
- Flexible hydrophobic 2D Ti3C2Tx-based transparent conductive film with multifunctional self-cleaning, electromagnetic interference shielding and joule heating capacities (2021) (41)
- Memory effect on the crystallization behavior of poly(lactic acid) probed by infrared spectroscopy (2017) (41)
- Crystallization kinetics and morphology of partially melted poly(lactic acid) (2014) (40)
- Flexible Conductive Polyimide Fiber/MXene Composite Film for Electromagnetic Interference Shielding and Joule Heating with Excellent Harsh Environment Tolerance. (2021) (40)
- Orientation and structural development of semicrystalline poly(lactic acid) under uniaxial drawing assessed by infrared spectroscopy and X-ray diffraction (2015) (40)
- The effect of double grafted interface layer on the properties of carbon fiber reinforced polyamide 66 composites (2018) (39)
- Bimetal Synergistic Effect Induced High Reversibility of Conversion-Type Ni@NiCo2S4 as Freestanding Anode for Sodium-Ion Batteries. (2020) (39)
- Vapor sensing performance as a diagnosis probe to estimate the distribution of multi-walled carbon nanotubes in poly(lactic acid)/polypropylene conductive composites (2018) (39)
- Effect of constrained annealing on the microstructures of extrusion cast polylactic acid films (2011) (38)
- Micromechanical analysis of molecular orientation in high-temperature creep of polycarbonate (2018) (38)
- Superhydrophobic conductive rubber band with synergistic dual conductive layer for wide-range sensitive strain sensor. (2022) (37)
- Nonisothermal crystallization kinetics of biodegradable poly(lactic acid)/zinc phenylphosphonate composites (2014) (36)
- Investigation on parallel algorithms in efficient global optimization based on multiple points infill criterion and domain decomposition (2016) (36)
- Wide distribution of shish-kebab structure and tensile property of micro-injection-molded isotactic polypropylene microparts: a comparative study with injection-molded macroparts (2014) (36)
- Mechanical, Thermal, and Rheological Properties of Ti 3 C 2 T x MXene/ Thermoplastic Polyurethane Nanocomposites (2020) (36)
- Annealing Induced Mechanical Reinforcement of Injection Molded iPP Parts (2016) (36)
- Flow-induced fiber orientation in gas-assisted injection molded part (2007) (36)
- Facile Construction of Copper Mesh Surface from Superhydrophilic to Superhydrophobic for Various Oil-Water Separations (2019) (36)
- Facile fabrication of durable superhydrophobic mesh via candle soot for oil-water separation (2019) (36)
- Thickness effect on particle erosion resistance of thermoplastic polyurethane coating on steel substrate (2013) (36)
- Additive manufacturing of continuous carbon fiber reinforced poly-ether-ether-ketone with ultrahigh mechanical properties (2020) (35)
- Formation of β-cylindrites under supercooled extrusion of isotactic polypropylene at low shear stress (2011) (35)
- Flexible Ag Microparticle/MXene-Based Film for Energy Harvesting (2021) (35)
- Warpage optimization with dynamic injection molding technology and sequential optimization method (2015) (35)
- Engineering multilayered MXene/electrospun poly(lactic acid) membrane with increscent electromagnetic interference (EMI) shielding for integrated Joule heating and energy generating (2021) (35)
- An Alternating Skin–Core Structure in Melt Multi‐Injection‐Molded Polyethylene (2018) (35)
- Melting temperature, concentration and cooling rate-dependent nucleating ability of a self-assembly aryl amide nucleator on poly(lactic acid) crystallization (2019) (35)
- An effective planar triangular element with drilling rotation (2010) (34)
- Fabrication of Polycaprolactone Electrospun Fibers with Different Hierarchical Structures Mimicking Collagen Fibrils for Tissue Engineering Scaffolds (2018) (34)
- Multifunctional interlocked e-skin based on elastic micropattern array facilely prepared by hot-air-gun (2021) (34)
- Tuning of liquid sensing performance of conductive carbon black (CB)/polypropylene (PP) composite utilizing a segregated structure (2013) (34)
- Flow-Induced Dendritic β-Form Isotactic Polypropylene Crystals in Thin Films (2016) (33)
- Synergistic effect of carbon fibers on the conductive properties of a segregated carbon black/polypropylene composite (2014) (32)
- Morphological comparison of isotactic polypropylene molded by water-assisted and conventional injection molding (2011) (32)
- Electrically conductive carbon black/electrospun polyamide 6/poly(vinyl alcohol) composite based strain sensor with ultrahigh sensitivity and favorable repeatability (2019) (32)
- Reducing service stress of the injection-molded polycarbonate window by optimizing mold construction and product structure (2016) (32)
- Highly Thermal Conductive Poly(vinyl alcohol) Composites with Oriented Hybrid Networks: Silver Nanowire Bridged Boron Nitride Nanoplatelets. (2021) (31)
- Flexible Transparent Polypyrrole-Decorated MXene-Based Film with Excellent Photothermal Energy Conversion Performance. (2021) (31)
- Topology optimization of thermal–fluid problem using the MMC-based approach (2019) (31)
- Crystallization behavior of poly(lactic acid) with a self-assembly aryl amide nucleating agent probed by real-time infrared spectroscopy and X-ray diffraction (2017) (31)
- Achieving enhanced electromagnetic shielding and absorption capacity of cellulose-derived carbon aerogels via tuning the carbonization temperature (2020) (31)
- Nucleation effect of layered metal phosphonate on crystallization of isotactic polypropylene (2014) (31)
- Interfacial crystallization and mechanical property of isotactic polypropylene based single-polymer composites (2016) (30)
- Gas-assisted injection molded polypropylene: The skin-core structure (2008) (30)
- Tuning of the PTC and NTC effects of conductive CB/PA6/HDPE composite utilizing an electrically superfine electrospun network (2014) (30)
- Hydrophobic polycarbonate monolith with mesoporous nest-like structure: an effective oil sorbent (2017) (29)
- Electrospun coaxial PPESK/PVDF fibrous membranes with thermal shutdown property used for lithium-ion batteries (2019) (29)
- Numerical simulation of thermally induced stress and warpage in injection‐molded thermoplastics (2001) (29)
- Liquid sensing behaviors of conductive polypropylene composites containing hybrid fillers of carbon fiber and carbon black (2016) (29)
- Nonisothermal Crystallization Kinetics of Poly(lactic acid) Nucleated with a Multiamide Nucleating Agent (2014) (29)
- Crystal modifications and multiple melting behavior of poly(L‐lactic acid‐co‐D‐lactic acid) (2011) (29)
- A resilient and lightweight bacterial cellulose-derived C/rGO aerogel-based electromagnetic wave absorber integrated with multiple functions (2021) (29)
- Cellulose acetate monolith with hierarchical micro/nano-porous structure showing superior hydrophobicity for oil/water separation. (2020) (28)
- The role of gas penetration on morphological formation of polycarbonate/polyethylene blend molded by gas-assisted injection molding (2007) (28)
- Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design (2020) (28)
- Morphological Evolution and Orientation Development of Stretched iPP Films: Influence of Draw Ratio (2010) (28)
- Large-scale stereoscopic structured heazlewoodite microrod arrays and scale-like microsheets for lithium-ion battery applications (2012) (28)
- Magnetic, superelastic and superhydrophobic porous thermoplastic polyurethane monolith with nano-Fe3O4 coating for highly selective and easy-recycling oil/water separation (2021) (27)
- Ultra-stretchable and multifunctional wearable electronics for superior electromagnetic interference shielding, electrical therapy and biomotion monitoring (2021) (27)
- Organic vapor sensing behaviors of carbon black/poly (lactic acid) conductive biopolymer composite (2013) (27)
- High-Efficiency Electromagnetic Interference Shielding Capability of Magnetic Ti3C2Tx MXene/CNT Composite Film (2021) (27)
- Water-endurable intercalated graphene oxide adsorbent with highly efficient uranium capture from acidic wastewater (2021) (26)
- Positive Temperature Coefficient (PTC) Evolution of Segregated Structural Conductive Polypropylene Nanocomposites with Visually Traceable Carbon Black Conductive Network (2017) (26)
- Complexation of capsaicin with β-cyclodextrins to improve pesticide formulations: effect on aqueous solubility, dissolution rate, stability and soil adsorption (2012) (26)
- Morphology of gas‐assisted and conventional injection molded polycarbonate/polyethylene blend (2006) (26)
- Segregated conductive CNTs/HDPE/UHMWPE composites fabricated by plunger type injection molding (2018) (25)
- Crystallization of poly(lactic acid) enhanced by phthalhydrazide as nucleating agent (2013) (25)
- Fabrication of open‐porous PCL/PLA tissue engineering scaffolds and the relationship of foaming process, morphology, and mechanical behavior (2019) (25)
- Engineering hierarchical heterostructure material based on metal-organic frameworks and cotton fiber for high-efficient microwave absorber (2022) (25)
- New insight into lamellar branching of β-nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS study (2014) (25)
- Temperature-resistivity characteristics of a segregated conductive CB/PP/UHMWPE composite (2014) (25)
- Superelastic and Durable Hierarchical Porous Thermoplastic Polyurethane Monolith with Excellent Hydrophobicity for Highly Efficient Oil/Water Separation (2019) (24)
- Controllable fiber orientation and nonlinear elasticity of electrospun nanofibrous small diameter tubular scaffolds for vascular tissue engineering (2019) (24)
- Shear‐Induced Skin‐Core Structure of Molten Isotactic Polypropylene and the Formation of β‐Crystal (2018) (24)
- Carbon welding on graphene skeleton for phase change composites with high thermal conductivity for solar-to-heat conversion (2022) (24)
- Bridging the segregated structure in conductive polypropylene composites: An effective strategy to balance the sensitivity and stability of strain sensing performances (2018) (24)
- Selective dispersion of carbon nanotubes and nanoclay in biodegradable poly(ε-caprolactone)/poly(lactic acid) blends with improved toughness, strength and thermal stability. (2019) (24)
- Gate Location Optimization in Injection Molding By Using Modified Hill-Climbing Algorithm (2004) (24)
- Improved microwave absorption performance of double helical C/Co@CNT nanocomposite with hierarchical structures (2021) (24)
- Overview of the Experimental Trends in Water-Assisted Injection Molding (2018) (23)
- One-pot synthesis and the electrochemical properties of nano-structured nickel selenide materials with hierarchical structure (2013) (23)
- Carbon black and polydopamine modified non-woven fabric enabling efficient solar steam generation towards seawater desalination and wastewater purification (2022) (23)
- An ultra-light, superhydrophobic and thermal insulation ultra-high molecular weight polyethylene foam (2021) (23)
- Nacre-inspired tunable strain sensor with synergistic interfacial interaction for sign language interpretation (2021) (23)
- Constructing dual thermal conductive networks in electrospun polyimide membranes with highly thermally conductivity but electrical insulation properties (2021) (23)
- Superhydrophobic cellulose acetate/multiwalled carbon nanotube monolith with fiber cluster network for selective oil/water separation. (2021) (23)
- Dynamic oscillatory rheological properties of polystyrene/poly(methyl methacrylate) blends and their composites in the presence of carbon black (2018) (23)
- Systematic Control of Self-Seeding Crystallization Patterns of Poly(ethylene oxide) in Thin Films (2018) (23)
- Facile preparation of lightweight PE/PVDF/Fe3O4/CNTs nanocomposite foams with high conductivity for efficient electromagnetic interference shielding (2020) (23)
- Robust double-layered ANF/MXene-PEDOT:PSS Janus films with excellent multi-source driven heating and electromagnetic interference shielding properties (2022) (23)
- β-Crystal in injection moulded poly(ethylene terephthalate) fibre/isotactic polypropylene composite (2013) (22)
- Versatile Janus Composite Nonwoven Solar Absorbers with Salt Resistance for Efficient Wastewater Purification and Desalination. (2021) (22)
- Hollow-porous fibers for intrinsically thermally insulating textiles and wearable electronics with ultrahigh working sensitivity (2021) (22)
- Multi-functional and flexible helical fiber sensor for micro-deformation detection, temperature sensing and ammonia gas monitoring (2021) (22)
- β-transcrystallinity developed from the novel ringed nuclei in the glass fiber/isotactic polypropylene composite (2011) (22)
- Computing flow-induced stresses of injection molding based on the Phan–Thien–Tanner model (2008) (22)
- Multifractal analysis of fracture morphology of poly(ethylene-co-vinyl acetate)/carbon black conductive composite (2010) (22)
- Quantitative nanomechanical mapping on poly(lactic acid)/poly(ε-caprolactone)/carbon nanotubes bionanocomposites using atomic force microscopy (2019) (22)
- Morphological Changes of Isotactic Polypropylene Crystals Grown in Thin Films (2017) (22)
- Warpage prediction of the injection-molded strip-like plastic parts (2016) (22)
- Silk and Silk Composite Aerogel-Based Biocompatible Triboelectric Nanogenerators for Efficient Energy Harvesting (2020) (21)
- Pre-shear induced anomalous distribution of β-form in injection molded iPP (2013) (21)
- Simple water tunable polyurethane microsphere for super-hydrophobic dip-coating and oil-water separation (2020) (21)
- Effects of nanoclays on the thermal stability and flame retardancy of microcellular thermoplastic polyurethane nanocomposites (2018) (21)
- Particle size induced tunable positive temperature coefficient characteristics in electrically conductive carbon nanotubes/polypropylene composites (2016) (21)
- Skinless porous films generated by supercritical CO2 foaming for high-performance complementary shaped triboelectric nanogenerators and self-powered sensors (2021) (21)
- Fire/heat-resistant, anti-corrosion and folding Ti2C3Tx MXene/single-walled carbon nanotube films for extreme-environmental EMI shielding and solar-thermal conversion applications (2021) (21)
- Crystallization behavior and nucleation analysis of isotactic polypropylene with a multiamide nucleating agent (2014) (21)
- Realizing the simultaneously improved toughness and strength of ultra-thin LLDPE parts through annealing (2013) (21)
- Numerical Simulation for Effects of Injection Mold Cooling on Warpage and Residual Stresses (2003) (20)
- Crystallization behavior and mechanical properties of poly(lactic acid)/poly(ethylene oxide) blends nucleated by a self-assembly nucleator (2018) (20)
- Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing Warpage of Injection Molded Products (2017) (20)
- Preparation and characterization of microbial biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/organoclay nanocomposites (2012) (20)
- Enhanced orientation of the water-assisted injection-molded ipp in the presence of nucleating agent (2012) (19)
- Thermosensitive Polyacrylonitrile/Polyethylene Oxide/Polyacrylonitrile Membrane Separators for Prompt and Safer Thermal Lithium-Ion Battery Shutdown (2020) (19)
- Melt-Processed Poly(Ether Ether Ketone)/Carbon Nanotubes/Montmorillonite Nanocomposites with Enhanced Mechanical and Thermomechanical Properties (2019) (19)
- Unexpected molecular weight dependence of shish kebab in water‐assisted injection molded HDPE (2013) (19)
- Effects of modified silica on morphology, mechanical property, and thermostability of injection-molded polycarbonate/silica nanocomposites (2014) (19)
- A high-strength electrospun PPESK fibrous membrane for lithium-ion battery separator (2019) (19)
- Spectroscopic analysis of post drawing relaxation in poly(lactic acid) with oriented mesophase (2015) (19)
- Anisotropic Conductive Polymer Composites Based on High Density Polyethylene/Carbon Nanotube/Polyoxyethylene Mixtures for Microcircuits Interconnection and Organic Vapor Sensor (2019) (19)
- The remarkably enhanced particle erosion resistance and toughness properties of glass fiber/epoxy composites via thermoplastic polyurethane nonwoven fabric (2018) (19)
- Enhanced thermal, mechanical and electromagnetic interference shielding properties of graphene nanoplatelets-reinforced poly(lactic acid)/poly(ethylene oxide) nanocomposites (2020) (19)
- Nonisothermal Cold Crystallization Kinetics of Poly(ethylene terephthalate)/Clay Nanocomposite (2003) (19)
- Crystal morphology and structure of the β‐form of isotactic polypropylene under supercooled extrusion (2011) (19)
- Interfacial adhesion enhanced flexible polycarbonate/carbon nanotubes transparent conductive film for vapor sensing (2019) (18)
- Enhanced mechanical properties of polyethylene composites with low content of electrospun nylon-66 nanofibers (2015) (18)
- Improved cell nucleating effect of partially melted crystal structure to enhance the microcellular foaming and impact properties of isotactic polypropylene (2020) (18)
- Effects of temperature and fiber orientation on the tensile behavior of short carbon fiber reinforced PEEK composites (2020) (18)
- Hierarchical HCF@NC/Co Derived from Hollow Loofah Fiber Anchored with Metal-Organic Frameworks for Highly Efficient Microwave Absorption. (2021) (18)
- “Nucleation density reduction” effect of biodegradable cellulose acetate butyrate on the crystallization of poly(lactic acid) (2014) (17)
- A modified hypervolume based expected improvement for multi-objective efficient global optimization method (2018) (17)
- Oriented structure in stretched isotactic polypropylene melt and its unexpected recrystallization: optical and X-ray studies (2011) (17)
- Poly(ethylene oxide)-promoted dispersion of graphene nanoplatelets and its effect on the properties of poly(lactic acid)/poly(butylene adipate-co-terephthalate) based nanocomposites (2019) (17)
- “Nucleation density reduction” effect of biodegradable cellulose acetate butyrate on the crystallization of poly(lactic acid) (2014) (17)
- Electrospun isotactic polypropylene fibers: Self-similar morphology and microstructure (2013) (17)
- Particle erosion on carbon nanofiber paper coated carbon fiber/epoxy composites (2013) (17)
- Waterproof Conductive Fiber with Microcracked Synergistic Conductive Layer for High-Performance Tunable Wearable Strain Sensor (2022) (17)
- The strain-sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene conductive composites prepared by the vacuum-assisted hot compression (2014) (17)
- Ultrafast printing of continuous fiber‐reinforced thermoplastic composites with ultrahigh mechanical performance by ultrasonic‐assisted laminated object manufacturing (2020) (16)
- Stretching‐induced β‐crystal of iPP: Influence of stretching ratio (2008) (16)
- PAANa-induced ductile SEI of bare micro-sized FeS enables high sodium-ion storage performance (2020) (16)
- A facile strategy for functionalizing silica nanoparticles by polycarbonate degradation and its application in polymer nanocomposites (2015) (16)
- Liquid sensing properties of carbon black/polypropylene composite with a segregated conductive network (2014) (16)
- Constitutive modeling for the accurate characterization of the tension behavior of PEEK under small strain (2018) (16)
- Scale effect on filling stage in micro-injection molding for thin slit cavities (2012) (16)
- Green fabrication of double-sided self-supporting triboelectric nanogenerator with high durability for energy harvesting and self-powered sensing (2022) (16)
- Superefficient and robust polymer coating for bionic manufacturing of superwetting surfaces with “rose petal effect” and “lotus leaf effect” (2021) (16)
- Coupled Part and Mold Temperature Simulation for Injection Molding Based on Solid Geometry (2006) (16)
- The microstructures of extrusion cast biodegradable poly(butylene succinate) films investigated by X-ray diffraction (2013) (16)
- Multifractal analysis of the tensile fracture morphology of polyvinylidene chloride/glass fiber composite (2011) (15)
- Optimization for Injection Molding Process Conditions of the Refrigeratory Top Cover Using Combination Method of Artificial Neural Network and Genetic Algorithms (2007) (15)
- Enhanced mechanical properties of biodegradable poly(ε-caprolactone)/cellulose acetate butyrate nanocomposites filled with organoclay (2019) (15)
- Enhancing Particle Erosion Resistance of Glass-Reinforced Polymeric Composites Using Carbon Nanofiber-Based Nanopaper Coatings (2013) (15)
- Study on Crystallization Kinetics of Partially Melting Polyethylene Aiming To Improve Mechanical Properties (2014) (15)
- Polyethylene oxide-assisted dispersion of graphene nanoplatelets in poly(lactic acid) with enhanced mechanical properties and crystallization ability (2019) (15)
- Transparent conductive flexible trilayer film for deicing window and self-recover bending sensor based on SWCNTs/PVB interlayer. (2019) (15)
- Highly linear and low hysteresis porous strain sensor for wearable electronic skins (2021) (15)
- Later Stage Melting of Isotactic Polypropylene (2020) (15)
- Bioinspired Concentric-Cylindrical Multilayered Scaffolds with Controllable Architectures: Facile Preparation and Biological Applications. (2018) (15)
- Mechanically Strengthened Polyamide 66 Nanofibers Bundles via Compositing With Polyvinyl Alcohol (2016) (15)
- Stretchable, Sensitive Strain Sensors with a Wide Workable Range and Low Detection Limit for Wearable Electronic Skins. (2022) (14)
- Multifunctional electromagnetic interference shielding films comprised of multilayered thermoplastic polyurethane membrane and silver nanowire (2021) (14)
- Twisted lamellae in water-assisted injection molded high density polyethylene (2016) (14)
- Nano-hybrid shish-kebab: Isotactic polypropylene epitaxial growth on electrospun polyamide 66 nanofibers via isothermal crystallization (2011) (14)
- The effects of nanoclay and deformation conditions on the inelastic behavior of thermoplastic polyurethane foams (2019) (14)
- Preparation and characterization of macroscopically electrospun polyamide 66 nanofiber bundles (2014) (14)
- Hierarchically Superhydrophobic Stereo‐Complex Poly (Lactic Acid) Aerogel for Daytime Radiative Cooling (2022) (14)
- The hierarchical structure of water-assisted injection molded high density polyethylene: Small angle X-ray scattering study (2012) (14)
- Comparative study of fullerenes and graphene nanoplatelets on the mechanical and thermomechanical properties of poly(ether ether ketone) (2019) (14)
- FeCo Alloy Nanoparticles Decorated Cellulose Based Carbon Aerogel as Low-Cost and Efficient Electromagnetic Microwave Absorber (2021) (14)
- Molecular orientation dependent dynamic viscoelasticity in uni-axially drawn polycarbonate (2018) (14)
- Transcrystallization in nanofiber bundle/isotactic polypropylene composites: effect of matrix molecular weight (2012) (14)
- Flexible and robust porous thermoplastic polyurethane/reduced graphene oxide monolith with special wettability for continuous oil/water separation in harsh environment (2021) (14)
- Large-area fabrication and applications of patterned surface with anisotropic superhydrophobicity (2020) (13)
- Crystallization behavior of partially melted poly(ether ether ketone) (2017) (13)
- Model and simulation for melt flow in micro-injection molding based on the PTT model (2011) (13)
- Continuous fabrication of polyethylene microfibrilar bundles for wearable personal thermal management fabric (2021) (13)
- Direct microscopic observation of shish-kebab structure in high-temperature electrospun iPP fibers (2016) (13)
- Correction to: Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth (2022) (13)
- Simple Design of a Porous Solar Evaporator for Salt-Free Desalination and Rapid Evaporation. (2022) (13)
- Impedance response behavior and mechanism study of axon-like ionic conductive cellulose-based hydrogel strain sensor (2022) (13)
- Programmable micropatterned surface for single-layer homogeneous-polymer Janus actuator (2021) (13)
- Fe ionic induced strong bioinspired Fe3O4@graphene aerogel with excellent electromagnetic shielding effectiveness (2020) (13)
- Improvement of environmental stress cracking resistance of polycarbonate by silicone coating (2017) (13)
- Ultrahigh molecular weight polyethylene fiber/boron nitride composites with high neutron shielding efficiency and mechanical performance (2022) (13)
- HDPE solution crystallization induced by electrospun PA66 nanofiber (2011) (13)
- Cold crystallization behavior of glassy poly(lactic acid) prepared by rapid compression (2015) (13)
- A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator (2018) (12)
- Shish-Kebab-Structured UHMWPE Coating for Efficient and Cost-Effective Oil-Water Separation. (2020) (12)
- Numerical simulation for flow-induced stress in injection/compression molding (2016) (12)
- Enhanced β-crystal formation of isotactic polypropylene under the combined effects of acid-corroded glass fiber and preshear (2013) (12)
- CdS@SiO2 Core-Shell Electroluminescent Nanorod Arrays Based on a Metal-Insulator-Semiconductor Structure. (2016) (12)
- Strengthening, toughening, and self‐healing for carbon fiber/epoxy composites based on PPESK electrospun coaxial nanofibers (2021) (12)
- Effects of Hydrothermal Aging of Carbon Fiber Reinforced Polycarbonate Composites on Mechanical Performance and Sand Erosion Resistance (2020) (12)
- The introduction of amino termination on Ti3C2 MXene surface for its flexible film with excellent property (2021) (12)
- Effect of injection speed on the mechanical properties of isotactic polypropylene micro injection molded parts based on a nanoindentation test (2018) (12)
- Suppressing the skin–core structure in injection-molded HDPE parts via the combination of pre-shear and UHMWPE (2015) (12)
- Effects of Process Parameters and Two-Way Interactions on Sink Mark Depth of Injection Molded Parts by Using the Design of Experiment Method (2007) (12)
- A flexible semitransparent dual-electrode hydrogel based triboelectric nanogenerator with tough interfacial bonding and high energy output (2020) (11)
- Simultaneously improving tensile strength and toughness of melt‐spun β‐nucleated isotactic polypropylene fibers (2016) (11)
- Structural evolution of poly(lactic acid) upon uniaxial stretching investigated by in situ infrared spectroscopy (2016) (11)
- Broadened foaming scope of iPP adjusted by its self-enhancement and nucleating agent under compressed CO2 (2018) (11)
- Effect of injection velocity on the filling behaviors of microinjection-molded polylactic acid micropillar array product (2019) (11)
- Fabrication of a polymer/aligned shish-kebab composite: microstructure and mechanical properties (2015) (11)
- Influence of melt structure on Form II to I phase transition of Polybutene-1 under shear flow (2020) (11)
- Simulation of Jetting in Injection Molding Using a Finite Volume Method (2016) (11)
- Lightweight, mechanical robust foam with a herringbone-like porous structure for oil/water separation and filtering (2018) (11)
- Effects of surface modification with 3-aminopropyltriethoxysilane on structure and mechanical property of multiwalled carbon nanotube/polycarbonate composites (2016) (11)
- Multi-scale molding and numerical simulation of the flow-induced crystallization of polymer (2013) (11)
- Tunable resistivity–temperature characteristics of an electrically conductive multi-walled carbon nanotubes/epoxy composite (2015) (11)
- Electrospun poly(vinyl alcohol)/silica film for radiative cooling (2022) (11)
- Facile Route to Improve the Crystalline Memory Effect: Electrospun Composite Fiber and Annealing (2018) (11)
- Hierarchical Nanofibrous Mat Via Water-Assisted Electrospinning for Self-Powered Ultrasensitive Vibration Sensors (2022) (10)
- Investigation on the phase transition from Form II to Form I in iPB-1 after pre-stretching (2020) (10)
- Inhomogeneous deformation of crystalline skeleton of syndiotactic polypropylene under uniaxial stretching (2012) (10)
- A Prerequisite of the Poly(ε‐Caprolactone) Self‐Induced Nanohybrid Shish–Kebab Structure Formation: An Ordered Crystal Lamellae Orientation Morphology of Fibers (2017) (10)
- Simulation of Polymer Melt Injection Molding Filling Flow Based on an Improved SPH Method with Modified Low‐Dissipation Riemann Solver (2021) (10)
- Electrically conductive CB/PA6/HDPE composite with a CB particles coated electrospun PA6 fibrous network (2014) (10)
- Thermal Degradation Behavior and Kinetics of 3D Porous Polycarbonate Monoliths (2019) (9)
- Morphology and Properties of Porous and Interconnected Poly(ε-caprolactone) Matrices Using Solid and Microcellular Injection Molding (2012) (9)
- Facile Thermally Impacted Water-Induced Phase Separation Approach for the Fabrication of Skin-Free Thermoplastic Polyurethane Foam and Its Recyclable Counterpart for Oil-Water Separation (2018) (9)
- A Dual Domain Method for 3-D Flow Simulation (2005) (9)
- The degradation rate of polyanhydride (poly(sebacic acid), diacetoxy terminated, PSADT) (2013) (9)
- Fabrication of wrinkled thermoplastic polyurethane foams by dynamic supercritical carbon dioxide foaming (2022) (9)
- Tailoring microstructure and mechanical properties of injection molded isotactic–polypropylene via high temperature preshear (2015) (9)
- Superhydrophobic porous polyvinylidene fluoride monolith with outstanding environmental suitability for high-efficient continuous oil/water separation under harsh conditions (2022) (9)
- High-pressure induced formation of isotactic polypropylene mesophase: Synergistic effect of pressure and pressurization rate (2018) (9)
- Mechanically robust and conductive poly(acrylamide) nanocomposite hydrogel by the synergistic effect of vinyl hybrid silica nanoparticle and polypyrrole for human motion sensing (2022) (9)
- Advancing the pressure sensing performance of conductive CNT/PDMS composite film by constructing a hierarchical-structured surface (2022) (9)
- Two-stage drawing process to prepare high-strength and porous ultrahigh-molecular-weight polyethylene fibers: Cold drawing and hot drawing (2015) (9)
- The Numerical Simulation of the Crystallization Morphology Evolution of Semi-Crystalline Polymers in Injection Molding (2010) (9)
- Phase transitions of the rapid‐compression‐induced mesomorphic isotactic polypropylene under high‐pressure annealing (2019) (9)
- Integration optimization of molding and service for injection-molded product (2016) (9)
- Poly[(Butyl acrylate)-co-(butyl methacrylate)] as Transparent Tribopositive Material for High-Performance Hydrogel-Based Triboelectric Nanogenerators (2020) (8)
- Relation Between Charge Transport and the Number of Interconnected Lamellar Poly(3-Hexylthiophene) Crystals (2019) (8)
- Liquid‐sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene composites: A comparative study (2015) (8)
- Suppression of β-crystal in iPP/PET Fiber Composites (2010) (8)
- The influence of sub-Tg annealing on environmental stress cracking resistance of polycarbonate (2016) (8)
- Poly (vinyl alcohol)/Graphene Nanocomposite Hydrogel Scaffolds for Control of Cell Adhesion (2020) (8)
- Modeling and prediction of morphology and crystallinity for cylindrical‐shaped crystals during polymer processing (2010) (8)
- Crystallization behavior of poly(lactic acid) and its blends (2020) (8)
- Ultra-Stable and Durable Silicone Coating on Polycarbonate Surface Realized by Nanoscale Interfacial Engineering. (2020) (8)
- Self-Nucleation of β-Form Isotactic Polypropylene Lamellar Crystals in Thin Films (2021) (8)
- Superhydrophobic polycarbonate blend monolith with micro/nano porous structure for selective oil/water separation (2022) (8)
- Negative effect of stretching on the development of β‐phase in β‐nucleated isotactic polypropylene (2011) (8)
- Microribbon Structured Polyvinylidene Fluoride with High-Performance Piezoelectricity for Sensing Application (2021) (8)
- Transcrystallinity in a Polycarbonate(PC)/Polyethylene(PE) Blend Prepared by Gas-Assisted Injection Molding: A New Understanding of Its Formation Mechanism (2008) (7)
- Fabrication and Characterization of Highly Porous Chitosan/Poly(DL lactic-co-glycolic acid) Nanocomposite Scaffolds Using Electrospinning and Freeze Drying (2014) (7)
- An Optimization Scheme Based on Flow Resistance to Locate Optimum Gate of Complex Part (2005) (7)
- Facile Preparation of Cellulose Derived Carbon/BN Composite Aerogel for Superior Electromagnetic Wave Absorption (2022) (7)
- Microstructure and Mechanical Properties of Isotactic Polypropylene Films Fabricated via Melt-Extrusion and Uniaxial-Stretching (2016) (7)
- Fabrication of hierarchically porous superhydrophilic polycaprolactone monolith based on nonsolvent-thermally induced phase separation (2020) (7)
- MXene/Polylactic Acid Fabric-Based Resonant Cavity for Realizing Simultaneous High-Performance Electromagnetic Interference (EMI) Shielding and Efficient Energy Harvesting. (2022) (7)
- Viscoelastic modeling and simulation for polymer melt flow in injection/compression molding (2019) (7)
- Ultra‐High Initial Coulombic Efficiency Induced by Interface Engineering Enables Rapid, Stable Sodium Storage (2021) (7)
- Markedly improved hydrophobicity of cellulose film via a simple one-step aminosilane-assisted ball milling. (2022) (7)
- Preparation and Characterization of a Bipolar Membrane Modified by Copper Phthalocyanine 16-Carboxylic Acid and Acetyl Ferrocene (2014) (7)
- Superhydrophobic UHMWPE Foams with High Mechanical Robustness and Durability Fabricated by Supercritical CO2 Foaming (2021) (7)
- Temperature-dependent orientation of poly(ether ether ketone) under uniaxial tensile and its correlation with mechanical properties (2019) (7)
- Foaming Behaviors and Mechanical Properties of Injection-Molded Polylactide/Cotton-Fiber Composites (2020) (7)
- Tunable temperature-resistivity behaviors of carbon black/polyamide 6 /high-density polyethylene composites with conductive electrospun PA6 fibrous network (2018) (7)
- Self-assembly of a Sandwich-like Cadmium Ferrocenyl Coordination Polymer and its Third-Order Nonlinear Optical Properties (2010) (6)
- Biodegradable PLA/CNTs/Ti3C2Tx MXene nanocomposites for efficient electromagnetic interference shielding (2021) (6)
- Fabric-based all-weather-available photo-electro-thermal steam generator with high evaporation rate and salt resistance (2022) (6)
- Generating Nanoscopic Patterns in Conductivity within a Poly(3-hexylthiophene) Crystal via Bias-Controlled Scanning Probe Nanolithography (2018) (6)
- 3D Flow Simulation for Viscous Nonisothermal Incompressible Fluid in Injection Molding (2005) (6)
- Fracture toughness assessment of polypropylene random copolymer with multiple stress modes using the essential work of fracture theory (2015) (6)
- An Improved Algorithm for the Simulation of Injection-molding Filling Process (2005) (6)
- Computational Modeling and Numerical Simulation of Flow-Induced Crystallization Kinetics During Injection Molding of Polyethylene Terephthalate (2010) (6)
- Liquid-sensing behaviors of carbon black/polyamide 6/high-density polyethylene composite containing ultrafine conductive electrospun fibrous network (2016) (6)
- Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description (2016) (6)
- Melt extension-induced shish-kebabs with heterogeneous spatial distribution of crystalline polymorphs in lightly crosslinked poly(lactic acid) (2020) (6)
- Simultaneously reinforcing and toughening poly(lactic acid) by incorporating reactive melt‐functionalized silica nanoparticles (2020) (6)
- Fibers-induced segregated-like structure for polymer composites achieving excellent thermal conductivity and electromagnetic interference shielding efficiency (2022) (6)
- Preparation of SiC–SiO2–CuO composites (2007) (6)
- Microspheres Modified Superhydrophobic Non‐Woven Fabric with High‐Efficiency Oil/Water Separation: Control Water Content in PLA Solution (2022) (6)
- Highly Tunable Piezoelectricity of Flexible Nanogenerators Based on 3D Porously Architectured Membranes for Versatile Energy Harvesting and Self-Powered Multistimulus Sensing (2021) (6)
- Molecular dynamics simulation of bubble nucleation in Carbon Dioxide/Hexadecane Solution as an analog to foaming of polyethylene by Super Critical Carbon Dioxide: (2011) (5)
- Controlling the pore size in conjugated polymer films via crystallization-driven phase separation. (2019) (5)
- Simultaneous enhancements in the strength, modulus and toughness of electrospun polymeric membranes (2017) (5)
- Predictive Modeling of Non-Isothermal Crystallization in the Solidification of Polyoxymethylene Melt (2010) (5)
- Effect of electron beam irradiation dose on the properties of commercial biodegradable poly(lactic acid), poly(butylenes adipate-co-terephthalate) and their blends (2020) (5)
- Nonisothermal melt and cold crystallization behaviors of biodegradable poly(lactic acid)/Ti3C2Tx MXene nanocomposites (2021) (5)
- Competition effect of shear‐induced nuclei and multiwalled carbon nanotubes (MWCNT) on β‐isotactic polypropylene (iPP) formation in preshear injection‐molded iPP/MWCNT nanocomposites (2018) (5)
- Influence of scale effect and injection speed on morphology and structure of the microinjection molded isotactic polypropylene parts (2020) (5)
- A fast and high accuracy numerical simulation algorithm of the polymer spherulite at the mesoscale Level (2017) (5)
- The influence of boron nitride shape and size on thermal conductivity, rheological and passive cooling properties of polyethylene composites (2022) (4)
- Mould wall friction effects on micro injection moulding based on simulation of MIS (2010) (4)
- Effect of injection velocity on the filling behaviors of microinjection-molded polylactic acid micropillar array product (2019) (4)
- Transparent, intrinsically stretchable cellulose nanofiber-mediated conductive hydrogel for strain and humidity sensing. (2022) (4)
- Structure and Mechanical Properties of Multi-Walled Carbon Nanotubes-Filled Isotactic Polypropylene Composites Treated by Pressurization at Different Rates (2019) (4)
- Sandwiched Film with Reversibly Switchable Transparency Through Cyclic Melting-Crystallization (2022) (4)
- 3D Viscoelastic Simulation of Jetting in Injection Molding (2019) (4)
- Effect of Stretching on β-Phase Content of Isotactic Polypropylene Melt Containing β-Nucleating Agent (2012) (4)
- Stretchable strain sensor with high sensitivity, large workable range and excellent breathability for wearable electronic skins (2022) (4)
- Flexible layered cotton cellulose-based nanofibrous membranes for piezoelectric energy harvesting and self-powered sensing. (2021) (4)
- Study of Casting Self-Colored Liquid Crystalline Solid Films of Hydroxypropyl Cellulose (2013) (4)
- Superhydrophobic Flexible Conductive PFDT/CB/MXene@Paper for High-Efficient EMI Shielding and Joule Heating Applications (2022) (4)
- Notice of RetractionParticle tracking in micro-injection molding simulated by MIS (2010) (4)
- One-Step Fabrication of Sandwiched Film Based Triboelectric Nanogenerator for Large-Area Energy Harvester and Precise Self-Powered Sensor (2022) (3)
- Highly Stable and Transparent Conductive Film Realized by Semi-embedded Polydopamine/Silver Nanowire Network (2020) (3)
- Fabrication of Polyether–Ether–Ketone Foams with Superior Properties and Mitigated Weld Lines by Microcellular Injection Molding (2021) (3)
- MOF-implanted poly (acrylamide-co-acrylic acid)/chitosan organic hydrogel for uranium extraction from seawater. (2022) (3)
- The retardation effects of lamellar slip or/and chain slip on void initiation during uniaxial stretching of oriented iPP (2021) (3)
- Flowing simulation of injection molded parts with micro-channel (2014) (3)
- NUMERICAL SIMULATION OF CRYSTALLIZATION KINETICS DURING INJECTION MOLDING FOR SEMI-CRYSTALLINE POLYMERS: NUMERICAL SIMULATION OF CRYSTALLIZATION KINETICS DURING INJECTION MOLDING FOR SEMI-CRYSTALLINE POLYMERS (2009) (3)
- Polymer microfibrillar tube for continuous oil/water separation and collection (2021) (3)
- The Synergistic Effect of Rare‐Earth Complex Nucleating Agent and Graphene Oxide on the Non‐Isothermal Crystallization Behavior of iPP Originating From the Diverse Self‐Assembly Morphology (2020) (3)
- The thermal management of wearable and stretchable electronics. (2021) (3)
- Monodispersed Ni Nanoparticles Supported on Porous Glass: Composition and Size Controllable Synthesis (2015) (3)
- Effect of a small amount of poly(ethylene oxide) on crystal polymorphism of poly(l-lactic acid) (2020) (3)
- Dynamic viscoelasticity and molecular orientation in uniaxially drawn PC/PET blends (2019) (3)
- Enhanced interfacial and mechanical property of biodegradable poly(butylene succinate) film via introducing ultrahigh molecular weight polyethylene shish-kebab fibers (2020) (3)
- β-Crystal in the iPP melt encapsulated by transcrystallinity and spherulites: effect of molecular weight (2013) (3)
- Lightweight waterproof magnetic carbon foam for multifunctional electromagnetic wave absorbing material (2023) (3)
- A novel crystallization kinetics model of transcrystalline used for crystallization behavior simulation of short carbon fiber‐reinforced polymer composites (2018) (3)
- Solid particle erosion resistance and electromagnetic shielding performance of carbon fiber reinforced polycarbonate composites (2020) (3)
- Dewetting-Induced Alignment and Ordering of Cylindrical Mesophases in Thin Block Copolymer Films (2020) (3)
- Skin Thickness and β-Crystals Development in Injection-Molded iPP Along the Flow Direction (2009) (3)
- Transformation of a zinc inclusion complex to wurtzite ZnS microflowers under solvothermal conditions (2010) (3)
- Fabrication of highly porous interconnected three-dimensional scaffolds with micro-channels (2014) (2)
- Facile preparation of micropatterned thermoplastic surface for wearable capacitive sensor (2023) (2)
- An analytical model for temperature and crystalline evolution analysis of carbon fiber reinforced polymer composites during cooling (2020) (2)
- Hollow-porous fiber-shaped strain sensor with multiple wrinkle-crack microstructure for strain visualization and wind monitoring (2023) (2)
- Comparative study of the crystallization behavior and morphologies of carbon and glass fiber reinforced poly(ether ether ketone) composites (2020) (2)
- Construction of skin-electrode mechanosensing structure for wearable and epidermal electronic sensor. (2021) (2)
- Superhydrophobic Ultra-high Molecular Weight Polyethylene Nanocomposite Foams Fabricated by Supercritical CO2 Foaming for Selective Oil Absorption (2022) (2)
- Investigation of Mold Temperature Affecting on Shrinkage of Rapid Heat Cycle Molding Plastic Part (2011) (2)
- Robust and efficient UV-reflecting one-dimensional photonic crystals enabled by organic/inorganic nanocomposite thin films for photoprotection of transparent polymers (2021) (2)
- Strain dependent crystallization of isotactic polypropylene during solid-state stretching (2021) (2)
- Fabrication of skinless cellular poly (vinylidene fluoride) films by surface-constrained supercritical CO2 foaming using elastic gas barrier layers (2022) (2)
- Promising commercial fabrics with radiative cooling for personal thermal management. (2021) (2)
- Synergetic effect of crystal nucleating agent and melt self-enhancement of isotactic polypropylene on its rheological and microcellular foaming properties (2020) (2)
- Amino Termination of Ti3C2 MXene Induces its Graphene Hybridized Film with Enhanced Ordered Nanostructure and Excellent Multiperformance (2022) (2)
- Multi-stimuli-responsive actuator based on bilayered thermoplastic film. (2022) (2)
- Response of Two-Dimensional Polymeric Cadmium Ferrocenyl Disulfonates to Heavy Metal Ions (2010) (2)
- Study on Air Accumulation and Influence on Flow Balance in Micro-Injection Molding (2011) (2)
- Highly thermal conductive phase change composites containing Ag-welding graphene framework with excellent solar-thermal conversion and rapid heat transfer ability (2022) (2)
- Alternating aligned conductive stripes in polypropylene film with remarkable anisotropy for sensing application (2021) (2)
- High performance piezoelectric polymer film with aligned electroactive phase nanofibrils achieved by melt stretching of slightly crosslinked poly(vinylidene fluoride) for sensor applications (2022) (2)
- Asymmetric magnetic-electric dual-functional composite foams for ultra-efficient electromagnetic interference shielding with unprecedented low reflection (2022) (2)
- Material properties Mechanical enhancement of melt-stretched b-nucleated isotactic polypropylene : The role of lamellar branching of b-crystal (2017) (2)
- Farming‐Inspired Continuous Fabrication of Grating Flexible Transparent Film with Anisotropic Conductivity (2022) (2)
- Combined effect of poly(ethylene glycol) and boron nitride nanosheets on the crystallization behavior and thermal properties of poly(lactic acid) (2022) (1)
- Morphology evolution for isotactic polypropylene: Experiment and simulation (2015) (1)
- Optimization of runner sizes and process conditions considering both part quality and manufacturing cost in injecting molding (2011) (1)
- Self-Reinforced Thermoplastic Polyurethane Wrinkled Foams with High Energy Absorption Realized by Gas Cooling Assisted Supercritical CO2 Foaming (2022) (1)
- Flexible, Stretchable, and Transparent MXene Nanosheet/Thermoplastic Polyurethane Films for Multifunctional Heating and Electromagnetic Interference Shielding (2023) (1)
- Model and numerical simulation for the evolution of residual wall thickness in Water-Assisted Injection Molding (2010) (1)
- Warpage optimization with dynamic injection molding technology and sequential optimization method (2014) (1)
- Creep behavior and mechanical properties of isotactic polypropylene composites via twice melt injection molding (2019) (1)
- Environment‐tolerant conductive and superhydrophobic poly(m‐phenylene isophthalamide) fabric prepared via γ‐ray activation and reduced graphene oxide/nano SiO 2 modification (2021) (1)
- Flexible thermoplastic polyurethane/MXene foams for compressible electromagnetic interference shielding (2023) (1)
- Evaluation of typical rheological models fitting for polycarbonate squeeze flow (2015) (1)
- Pbat/Mxene Monolithic Solar Vapor Generator with High Efficiency on Seawater Evaporation and Swage Purification (2022) (1)
- Graphene oxide/thermoplastic polyurethane wrinkled foams with enhanced compression performance fabricated by dynamic supercritical CO 2 foaming (2022) (1)
- A review on the theories and numerical methods for injection molding simulations (2020) (1)
- Facile Fabrication of Nylon66/Multi-Wall Carbon Nanotubes/Polyvinyl Alcohol Nanofiber Bundles for Use as Humidity Sensors (2020) (1)
- Effect of shear on nucleation of carbon fiber reinforced polymer composites: Experiments and modeling (2020) (1)
- One-step exfoliation and deprotonation of ANF/BNNS suspension for constructing 3D vertically aligned skeleton in epoxy-based thermal management composites (2022) (1)
- Geometry Optimization of the Runner Insert for Improving the Appearance Quality of the Injection Molded Auto Part (2022) (1)
- Study on Impact Property and Fracture Morphology of Injection-molded Optical-grade Polycarbonate (2014) (1)
- Elastohydrodynamic lubrication analysis of polymer‐on‐polymer artificial hip joint of CF / PEEK composite (2021) (1)
- A combined melt-stretching and quenching setup for experimental studies of polymer crystallization under complex flow-temperature environments. (2023) (1)
- Crystallization Behavior of Rapid-Compression-Induced Mesomorphic Isotactic Polypropylene during Uniaxial Stretching at Different Temperatures (2022) (1)
- Formation and Structure Analysis of Interfacial Cylindrites Induced by Silkworm Silk Fiber in Poly(lactic acid) Based Composites (2017) (0)
- Healable Polyurethane-Based Composites with Shielding Capsule Structure for Absorption-Dominated Electromagnetic Interference Shielding (2022) (0)
- An integrated two-step strategy for an optimal design of liquid-cooled channel layout based on the MMC–density approach (2022) (0)
- Conductive Nanocomposites: Positive Temperature Coefficient (PTC) Evolution of Segregated Structural Conductive Polypropylene Nanocomposites with Visually Traceable Carbon Black Conductive Network (Adv. Mater. Interfaces 17/2017) (2017) (0)
- An Internal Electrode Strategy for Enhancing the Stability and Durability of Triboelectric Nanogenerator (2023) (0)
- Tunable release of poly(butylenes adipate-co-terephthalate)/poly(lactic acid) blend-based antibacterial bionanocomposites: comparative study of modified montmorillonite and graphene nanopletelets (2023) (0)
- Review on Cell Structure Regulation and Performances Improvement of Porous Poly (Lactic Acid). (2023) (0)
- Facile Fabrication of Stretchable Microgroove-Crack-Based Strain Sensor with High Sensitivity and Low Detection Limit (2023) (0)
- Integration optimization of molding and service for injection-molded product (2015) (0)
- Topology optimization of thermal–fluid problem using the MMC-based approach (2019) (0)
- A New Viscoelastic Model for Polycarbonate Compressing Flow (2018) (0)
- Plant-derived hybrid coatings as adsorption layers for uranium adsorption from seawater with high performance (2023) (0)
- Simple Approach to Fabricate an Anisotropic Wetting Surface with High Adhesive Force toward Droplet Transfer (2021) (0)
- Electrospun Core-Sheath PVDF Piezoelectric Fiber for Sensing Application. (2023) (0)
- Brownian dynamics simulation of branched polymer extensional rheological properties (2010) (0)
- Influence of Zn2+ catalyst stoichiometry on curing dynamics and stress relaxation of polyester-based epoxy vitrimer (2023) (0)
- Crystallization studies on heterogeneous melts of polybutene-1 (2022) (0)
- Strain-Hardening, Impact Protective and Self-Healing Supramolecular Polyurethane Nanocomposites Enabled by Quadruple H-Bonding, Disulfide Bonds and Nanoparticles (2023) (0)
- Simultaneously improved solid particle erosion resistant and strength of graphene nanoplates/carbon nanotube enhanced thermoplastic polyurethane films (2021) (0)
- Warpageoptimizationwithdynamicinjectionmoldingtechnology and sequential optimization method (2015) (0)
- Synergistic effects between carbon nanotube and anisotropy-shaped Ni in polyurethane sponge to improve electromagnetic interference shielding (2023) (0)
- Scale effect on filling stage in micro-injection molding for thin slit cavities (2012) (0)
- Influence of UVB-Irradiation on the Structures and Solid Particle Erosion Resistance for CF/PC Composites (2020) (0)
- Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth (2022) (0)
- Highly compressible and thermal insulative conductive MXene/PEDOT:PSS@melamine foam for promising wearable piezoresistive sensor (2023) (0)
- Correction to: Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth (2022) (0)
- Determining the maximum melting temperature of polymer crystals from a change in morphology of dewetting rims (2023) (0)
- A fibrous flexible strain sensor with Ag nanoparticles and carbon nanotubes for synergetic high sensitivity and large response range (2023) (0)
- Competing effect of shear and β-nucleating agent on the crystallization of injection-molded iPP (2010) (0)
- WITHDRAWN: Complexation of Capsaicin with β-Cyclodextrins to Improve Pesticide Formulations: Effect on Aqueous Solubility, Dissolution Rate, Stability and Soil Adsorption (2011) (0)
- Plant-derived adhesive hydrogel with high stretchability and conductivity for wearable electronics (2022) (0)
- A novel PPESK fibrous membrane separator based on electrospinning technique for lithium-ion battery (2017) (0)
- A Shish-Kebab Superstructure Film for Personal Radiative Cooling. (2023) (0)
- Binder‐Induced Ultrathin SEI for Defect‐Passivated Hard Carbon Enables Highly Reversible Sodium‐Ion Storage (2023) (0)
- Transparent and Stretchable Electromagnetic Interference Shielding Film with Fence-like Aligned Silver Nanowire Conductive Network. (2023) (0)
- Photothermal ultra-high molecular weight polyethylene/MXene aerogel for crude oil adsorption and water evaporation (2023) (0)
- Improving Strength of Carbon Fiber Grafted Carbon Nanotube Reinforced Thermoplastic Composites by 3D-Printed Molding (2019) (0)
- Super-Hydrophobic Graphene-Coated Thermoplastic Polyurethane Porous Monolith with Superior Photothermal Effect for Solar-Assisted Efficient Cleanup of Crude Oil Spill (2022) (0)
- Modeling of Shear Rheological Behavior of Uncured Rubber Melt (2020) (0)
- Effect of Rapid Compression on the Crystallization Behaviour of Polyethylene (2013) (0)
- Hollow Zn/Co zeolitic imidazolate framework-implanted composite hydrogel for highly efficient uranium extraction from seawater (2023) (0)
- Scalable micropatterned epoxy vitrimer films by thermo-triggered bond exchange for repairable and recyclable triboelectric nanogenerators (2023) (0)
- Flexible Ag Microparticle/MXene-Based Film for Energy Harvesting (2021) (0)
- Zinc Coordination Complex for use in Uniform ZnS Microflowers Synthesis (2010) (0)
- Influence of crystal orientation on stretching induced void formation in poly(4‐methyl‐1‐pentene) investigated by in‐situ small‐angle and wide‐angle X‐ ray scattering (2021) (0)
- Optimization of injection molding process parameters by the combining ANN/GA method (2004) (0)
- Recrystallization of Quenched β-Form Isotactic Polypropylene Lamellar Crystals in Thin Films (2022) (0)
- A Multiscale Simulation of Polymer Melt Injection Molding Filling Flow Using SPH Method with Slip-Link Model (2022) (0)
- Computing flow-induced stresses of injection molding based on PTT model (2010) (0)
- A dynamic supercritical carbon dioxide foaming method for fabricating wrinkled surface to enhance triboelectric nanogenerator performance (2022) (0)
- Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM (2017) (0)
- Synergistic Effect of Pressurization Rate and β-Form Nucleating Agent on the Multi-Phase Crystallization of iPP (2021) (0)
- Facile preparation of robust microgrooves based photonic crystals film for anti-counterfeiting (2023) (0)
- Zwitterion Functionalized Graphene Oxide/Polyacrylamide/Polyacrylic Acid Hydrogels with Photothermal Conversion and Antibacterial Properties for Highly Efficient Uranium Extraction from Seawater (2023) (0)
- Reducing service stress of the injection-molded polycarbonate window by optimizing mold construction and product structure (2016) (0)
- Effects of Thermal Compressive Strain on the Orientation Recovery for Ultra-Thin CNT-Filled Polypropylene Molding (2018) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Chang‐yu Shen?
Chang‐yu Shen is affiliated with the following schools:
