David Rosowsky
#67,345
Most Influential Person Now
American civil engineer
David Rosowsky's AcademicInfluence.com Rankings
David Rosowskyengineering Degrees
Engineering
#2644
World Rank
#3604
Historical Rank
Civil Engineering
#404
World Rank
#474
Historical Rank
Applied Physics
#2915
World Rank
#2973
Historical Rank
Download Badge
Engineering
Why Is David Rosowsky Influential?
(Suggest an Edit or Addition)According to Wikipedia, Dr. David V. Rosowsky is the current Vice President for Research at Kansas State University. Rosowsky is the former Provost and Senior Vice President at the University of Vermont. He previously served as the Dean of Engineering at Rensselaer Polytechnic Institute. Prior to that, he was Head of the Department of Civil Engineering at Texas A&M and a faculty member at Clemson. Widely known for his work applying probability models to building structural safety in natural hazards, he is member of the editorial board for the journal Structural Safety. He is a graduate of Tufts University, holds a Ph.D. in civil engineering from Johns Hopkins University, and is a fellow of the American Society of Civil Engineers.
David Rosowsky's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Time-dependent reliability of deteriorating reinforced concrete bridge decks (1998) (344)
- Fragility Assessment of Light-Frame Wood Construction Subjected to Wind and Earthquake Hazards (2004) (273)
- Seismic fragility estimates for reinforced concrete bridges subject to corrosion (2009) (212)
- Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion (2008) (212)
- Structural Safety and Serviceability of Concrete Bridges Subject to Corrosion (1998) (180)
- Negative Binomial Regression of Electric Power Outages in Hurricanes (2005) (178)
- Fragility assessment for roof sheathing failure in high wind regions (2005) (168)
- Performance-Based Engineering of Wood Frame Housing: Fragility Analysis Methodology (2002) (166)
- Estimating the spatial distribution of power outages during hurricanes in the Gulf coast region (2009) (141)
- Life-cycle performance of structures subject to multiple deterioration mechanisms (2011) (132)
- Long-term hurricane risk assessment and expected damage to residential structures (2001) (120)
- Electric Power Distribution System Performance in Carolina Hurricanes (2003) (112)
- Reliability-based method for assessing liquefaction potential of soils (1999) (109)
- Biodeterioration of Construction Materials: State of the Art and Future Challenges (2008) (91)
- Simplified Direct Displacement Design of Six-Story Woodframe Building and Pretest Seismic Performance Assessment (2010) (86)
- Hurricane simulation techniques for the evaluation of wind-speeds and expected insurance losses (2001) (81)
- Terrorism Risks and Blast Damage to Built Infrastructure (2006) (80)
- Fragility analysis of woodframe buildings considering combined snow and earthquake loading (2006) (76)
- Evolutionary parameter hysteretic model for wood shear walls (2006) (75)
- CPT-based liquefaction analysis, Part 2: Reliability for design (2000) (73)
- Uplift Capacity of Light-Frame Rafter to Top Plate Connections (1997) (72)
- Synthetic Hurricane Wind Speed Records: Development of a Database for Hazard Analyses and Risk Studies (2007) (72)
- Closed-Form Fragility Estimates, Parameter Sensitivity, and Bayesian Updating for RC Columns (2007) (71)
- Stiffness Degradation and Time to Cracking of Cover Concrete in Reinforced Concrete Structures Subject to Corrosion (2010) (67)
- CPT-based liquefaction analysis, Part 1: Determination of limit state function (2000) (65)
- Assessing Climate Change Impact on the U.S. East Coast Hurricane Hazard: Temperature, Frequency, and Track (2014) (62)
- Reliability-based bridge assessment using risk-ranking decision analysis (2001) (61)
- Seismic fragility estimates for corroding reinforced concrete bridges (2012) (61)
- Hurricane Risks and Economic Viability of Strengthened Construction (2003) (60)
- Duration of Load Effects in LRFD for Wood Construction (1991) (57)
- Modeling Changes in Hurricane Risk over Time (2005) (56)
- Fragility Increment Functions for Deteriorating Reinforced Concrete Bridge Columns (2010) (54)
- Defining resilience (2019) (52)
- Performance of Light-Frame Wood Residential Construction Subjected to Earthquakes in Regions of Moderate Seismicity (2008) (51)
- Reliability-based Seismic Design of Wood Shear Walls (2002) (48)
- Seismic fragility increment functions for deteriorating reinforced concrete bridges (2011) (45)
- Hierarchical infrastructure network representation methods for risk-based decision-making (2013) (44)
- Probabilistic Seismic Demand Models and Fragility Estimates for Reinforced Concrete Bridges with Two-Column Bents (2008) (43)
- System Reliability and Load‐Sharing Effects in Light‐Frame Wood Construction (1991) (41)
- Joint distribution model for prediction of hurricane wind speed and size (2012) (40)
- Direct Displacement Procedure for Performance-Based Seismic Design of Mid-Rise Wood-Framed Structures (2009) (39)
- Load duration effects in wood members and connections: order statistics and critical loads (2002) (37)
- Reliability of Light-Frame Roofs in High-Wind Regions. I: Wind Loads (1999) (36)
- Structural Reliability of Multistory Buildings during Construction (2002) (36)
- Reliability of Light-Frame Roofs in High-Wind Regions. II: Reliability Analysis (1999) (35)
- Hurricane wind hazard assessment for a rapidly warming climate scenario (2014) (34)
- Rate-of-Load and Duration-of-Load Effects for Wood Fasteners (1999) (34)
- Serviceability Design in LRFD for Wood (1993) (33)
- Fragility Analysis for Performance-Based Seismic Design of Engineered Wood Shearwalls (2005) (28)
- ASSESSMENT METHODOLOGY FOR DIAGONALLY CRACKED REINFORCED CONCRETE DECK GIRDERS (2004) (27)
- Combining Snow and Earthquake Loads for Limit States Design (1996) (27)
- Effects of Decay on the Cyclic Properties of Nailed Connections (2005) (26)
- Probabilistic analysis of time-dependent deflections of RC flexural members (2001) (25)
- Reliability of Wood Systems Subjected to Stochastic Live Loads (1992) (25)
- Estimation of design loads for reduced reference periods (1995) (24)
- Performance-Based Seismic Design of Midrise Woodframe Buildings (2013) (24)
- Accounting for Human Error during Design and Construction (1995) (23)
- Seismic Fragility Analysis and Retrofit of Conventional Residential Wood-Frame Structures in the Central United States (2009) (22)
- Effects of wood decay by Postia placenta on the lateral capacity of nailed oriented strandboard sheathing and douglas-fir framing members (2007) (22)
- Construction safety of multistory concrete buildings (1993) (21)
- Reliability of Wood Joist Floor Systems with Creep (1995) (21)
- Observations from Shore Load Measurements during Concrete Construction (1997) (21)
- Fragility curves for woodframe structures subjected to lateral wind loads (2006) (20)
- An extended model-based observer for state estimation in nonlinear hysteretic structural systems (2021) (20)
- Nonlinear seismic response reconstruction and performance assessment of instrumented wood‐frame buildings—Validation using NEESWood Capstone full‐scale tests (2019) (20)
- Site-Specific Snow Load Models and Hazard Curves for Probabilistic Design (2005) (20)
- ESTIMATING MOTORIST DELAY AT TWO-LANE HIGHWAY WORK ZONES (1994) (20)
- Performance-Based Procedure for Direct Displacement Design of Engineered Wood-Frame Structures (2010) (20)
- Reliability analysis of building serviceability problems caused by excavation (2008) (19)
- Joint Probabilistic Wind–Rainfall Model for Tropical Cyclone Hazard Characterization (2017) (19)
- Reliability of Light-Frame Wall Systems Subject to Combined Axial and Transverse Loads (2005) (18)
- Creep and Creep-Recovery Models for Wood Under High Stress Levels (2002) (18)
- Bayesian Updating of Seismic Demand Models and Fragility Estimates for Reinforced Concrete Bridges with Two-Column Bents (2009) (17)
- Integrating Models and Data to Estimate the Structural Reliability of Utility Poles During Hurricanes (2014) (17)
- Estimation of element‐by‐element demand‐to‐capacity ratios in instrumented SMRF buildings using measured seismic response (2018) (17)
- Effect of Hold-Down Misplacement on Strength and Stiffness of Wood Shear Walls (2005) (16)
- Risk, reliability and sustainability in the developing world (2008) (16)
- Characterization of Joint Wind and Ice Hazard in Midwestern United States (2016) (15)
- Finite Element Analysis of Moso Bamboo-Reinforced Southern Pine Osb Composite Beams (2007) (15)
- Probabilistic Modeling of Roof Sheathing Uplift Capacity (1996) (15)
- Characterization of joint wind–snow hazard for performance-based design (2013) (15)
- System Effects and Uplift Capacity of Roof Sheathing Fasteners (1996) (15)
- Strength-Based Seismic Reliability of Wood Shear Walls Designed According to AF&PA/ASCE 16 (2005) (14)
- Assessment and Risk Ranking of Conventionally Reinforced Concrete Bridges for Shear (2005) (14)
- What Are Our Expectations, Objectives, and Performance Requirements for Wood Structures in High Wind Regions? (2003) (14)
- PARTIAL FACTOR APPROACH TO REPETITIVE-MEMBER SYSTEM FACTORS (2004) (13)
- Energy‐Based Failure Criterion for Wood (1994) (12)
- Beam-spring model for timber diaphragm and shear walls (2010) (12)
- Experimental Seismic Performance Evaluation of a Full-Scale Woodframe Building (2007) (12)
- Strength-Based Reliability of Wood Shearwalls Subject to Wind Load (2005) (11)
- RELIABILITY OF WOOD STRUCTURAL SYSTEMS (1993) (11)
- Sheathing Nail Bending-Yield Stress: Effect on Cyclic Performance of Wood Shear Walls (2007) (11)
- Assessing Climate Change Impacts on Hurricane Hazards (2018) (11)
- Evolution of probabilistic analysis of timber structures from second-moment reliability methods to fragility analysis (2013) (11)
- EARLY-AGE LOADING AND LONG-TERM DEFLECTIONS OF REINFORCED CONCRETE BEAMS (2000) (11)
- Analysis of concrete placement load effects using influence surfaces (1996) (11)
- Probabilistic Construction Load Model for Multistory Reinforced-Concrete Buildings (2001) (10)
- Probabilistic Construction Load Model for Multistory Reinforced-Concrete Buildings (2001) (10)
- Reconstructing Element-by-Element Dissipated Hysteretic Energy in Instrumented Buildings: Application to the Van Nuys Hotel Testbed (2020) (10)
- Modeling Wood Walls Subjected to Combined Transverse and Axial Loads (2005) (10)
- Assessing Climate Change Impact on the Joint Wind-Rain Hurricane Hazard for the Northeastern U.S. Coastline (2016) (10)
- Statistical Modeling of Coupled Shear-Moment Resistance for RC Bridge Girders (2008) (9)
- Time-Dependent Service-Load Behavior of Wood Floors: Experimental Results (1997) (9)
- Limit‐State Interactions in Reliability‐Based Design for Wood Structures (1992) (9)
- Reliability-Based Code Calibration for Design of Wood Members Using Load and Resistance Factor Design (2005) (9)
- Measuring Formwork Loads During Construction (1994) (8)
- INVESTIGATING THE ADEQUACY OF VERTICAL DESIGN LOADS FOR SHORING (1998) (8)
- Partial Factor Design for Reinforced Concrete Buildings During Construction (1994) (8)
- Increasing the competitiveness of structural wood composites using probabilistic methods (1995) (8)
- Analytical tools to predict changes in properties of oriented strandboard exposed to the fungus Postia placenta (2006) (8)
- Another Look at Load Duration Effects in Wood (2002) (8)
- Optimisation of the design of infrastructure components subject to progressive deterioration and extreme loads (2012) (8)
- Structural reliability analysis method for viscoelastic members (1994) (8)
- Fatigue behavior of OSB in shear (1996) (8)
- Time-dependent service-load behavior of wood floors: analytical model (1998) (8)
- Assessing climate change impact on the US east coast hurricane hazard, II: Sea surface temperature and hurricane frequency (2014) (7)
- Effects of Earthquake Ground Motion Selection and Scaling Method on Performance-Based Engineering of Wood-Frame Structures (2014) (7)
- The Effect of Biological Deterioration on the Seismic Performance of Woodframe Shearwalls (2006) (7)
- Hazard-based regional loss estimation considering hurricane intensity, size and sea surface temperature change (2018) (6)
- Effect of Discrete Member Size on Reliability of Wood Beams (1997) (6)
- Reliability‐Based Design of Wood Members Subject to Ponding (1993) (6)
- Fragility assessment of structural systems in light-frame residential construction subjected to natural hazards (2004) (6)
- Incorporating nonstructural finish effects and construction quality in a performance-based framework for wood shearwall design (2005) (6)
- Hurricane Hazard Assessment System for Damage to Residential Structures in South Carolina (2000) (6)
- New Technique for Evaluating Damping of Longitudinal Free Vibration in Wood-Based Materials (1997) (6)
- Closed-form seismic fragility estimates, sensitivity analysis and importance measures for reinforced concrete columns in two-column bents (2012) (6)
- Calibration of Current Factors in LRFD for Steel (1994) (6)
- Wood Shearwall Reliability Inherent in AF&PA/ASCE 16 (2004) (5)
- Environmental Impact Bonds: a common framework and looking ahead (2021) (5)
- Joint Earthquake–Snow Hazard Characterization and Fragility Analysis of Wood-Frame Structures (2016) (5)
- Direction for duration-of-load research (1995) (5)
- IDA Comparison of IBC-Designed and DDD-Designed Six-Story Light-Frame Wood Buildings (2011) (5)
- Moisture Content and Reliability‐Based Design for Wood Members (1992) (5)
- Comparison of actual vs. simulated failure distributions of flexural wood specimens subject to 5-day load sequences. (2000) (5)
- LOAD COMBINATIONS AND LOAD FACTORS FOR CONSTRUCTION (1996) (5)
- Analysis of hurricane directionality effects using event-based simulation (2000) (5)
- Case for Enhanced In-Home Protection from Severe Winds (2002) (5)
- Joint Wind-Snow Hazard Characterization for Reduced Reference Periods (2014) (4)
- Nonlinear Seismic Response Reconstruction in Minimally Instrumented Buildings—Validation Using NEESWood Capstone Full-Scale Tests (2019) (4)
- Performance of timber buildings under high wind loads (2002) (4)
- Incorporating Nonstructural Finish Effects and Construction Quality Issues into a Performance-Based Framework for Wood Shearwall Selection (2004) (4)
- Performance-Based Seismic Design of Six-Story Woodframe Structure (2008) (4)
- Performance-Based Shear Wall Design of Six-Story Neeswood Capstone Building via Simplified Direct Displacement Design Procedure (2010) (4)
- Investigation of Uplift Capacity of Light-Frame Construction Subject to Wind Loads (1997) (3)
- Effect of load pulse shape on predicted damage accumulation in wood (1994) (3)
- Optimization Model for Design and Operation of Transportation Networks in Seismic Regions (2009) (3)
- Recovery: rebuilding a resilient housing stock (2011) (3)
- Reliability of residential woodframe construction from 1900 to present (2003) (3)
- Assessing the joint wind and temperature hazard for the United States (2014) (2)
- PREDICTING VEHICLE DELAY DURING MAINTENANCE OR RECONSTRUCTION ACTIVITY ON TWO-LANE HIGHWAYS. (1993) (2)
- Load-monitoring and hazard-warning systems for buildings under construction (1996) (2)
- CORROSION, DETERIORATION AND TIME-DEPENDENT RELIABILITY OF REINFORCED CONCRETE BRIDGE DECKS. (1997) (2)
- Projecting the effects of a warming climate on the hurricane hazard and insured losses: Methodology and case study (2021) (2)
- Stochastic Damage Accumulation and Reliability of Wood Members (2007) (2)
- Reliability-Based System Factor for Serviceability Design of Wood Floors (2007) (2)
- Use of phase-plot to evaluate damping of free vibration in wood-based materials (1996) (2)
- A Systems Approach to Risk Reduction of Transportation Infrastructure Networks Subject to Multiple Hazards (2008) (2)
- Time effects in the design of wood structures : A review (1996) (2)
- Seismic Damage Assessment of Instrumented Wood-frame Buildings: A Case-study of NEESWood Full-scale Shake Table Tests (2019) (2)
- Simplified Reliability Analysis of Light-Frame Roofs Subject to Uplift Loads (1999) (2)
- On the importance of mentorship and great mentors (2021) (2)
- A NEW MINERALOGICAL APPROACH TO PREDICT THE COEFFICIENT OF THERMAL EXPANSION OF AGGREGATE AND CONCRETE (2004) (2)
- Development of a Performance-Based Seismic Design Philosophy for Mid-Rise Woodframe Construction (NEES-2006-0138) (2017) (2)
- System Risk for Multi-Storey Reinforced Concrete Building Construction (1996) (2)
- Combined Loads on Sheathing to Framing Fasteners in Wood Construction (1999) (2)
- Stochastic Modeling of Lumber Properties (1994) (2)
- Tiered Approach to Performance-Based Seismic Design of Wood Frame Buildings (2008) (2)
- Load Duration and System Effects in LRFD for Wood Construction (1992) (1)
- PREDICTING VEHICLE DELAYS DURING MAINTENANCE OR RECONSTRUCTION ACTIVITY ON TWO-LANE HIGHWAYS. FINAL REPORT (1993) (1)
- Time-Dependent Load-Distribution Behavior of Parallel-Member Wood Systems (1994) (1)
- Assessing the Impact of Climate Change on the U.S. East Coast Hurricane Hazard: Wind and Rain (2014) (1)
- 8th US National Conference on Earthquake Engineering 2006 (2006) (1)
- World Conference on Timber Engineering - WCTE 2006 (2006) (1)
- Lumber-Boxed Concrete Structural System—Concept and Preliminary Analysis (2011) (1)
- Residential Building Loads: Review and Roadmap for the Future (2006) (1)
- Performance of wood-frame structures under high wind loads. (2000) (1)
- Keeping Pace with Evolving Load Standards: Recalibration of LRFD for Wood (2006) (1)
- Computational Damage Modeling for Timber Reliability Analysis (1991) (1)
- Professional Decisions (I: the Central Role of Models, and II: Responsibilities) (2013) (1)
- Mismatched expectations, objectives, and performance requirements for wood-frame construction in high-wind regions. (2000) (1)
- Effect of Concrete Workmanship on Strength Reliability of R/C Beams (1996) (0)
- Implications of hurricane : sea surface temperature relationship (2015) (0)
- Probability-Based Design of Wood Roof Systems (2000) (0)
- Lessons Learned from the Structural Retrofit of a Historic Charleston House (1999) (0)
- A BEAM-SPRING ANALOG MODEL FOR SEISMIC ANALYSIS OF SEMI-RIGID WOOD DIAPHRAGMS (2010) (0)
- Initial study on the effects of ground motion selection and scaling method on performance-based engineering of wood-frame structures (2014) (0)
- DISPLACEMENT-BASED DESIGN OF WOODFRAMED STRUCTURES WITH LINEAR VISCOUS FLUID DAMPERS (2008) (0)
- Shoring Measurements at Museum Towers (1999) (0)
- Serviceability Analysis of Wood Beams with Creep (1992) (0)
- DESIGN AND OPTIMIZATION OF A FEEDER DEMAND RESPONSIVE TRANSIT SYSTEM IN EL CENIZO, TX A Thesis by SHAILESH CHANDRA (2009) (0)
- METABOLISM OF MIXTURES OF POLYCYLIC AROMATIC (2005) (0)
- Analysis of Shoring Loads Using Field Data (1996) (0)
- Modeling the Traffic Flow Impacts of Rehabilitation Activity on Two-Lane Highways (1993) (0)
- Deflection Serviceability Design for Wood Members and Systems (1996) (0)
- Predicting strength of matched sets of test specimens (2007) (0)
- Extreme Events for Infrastructure: Uncertainty and Risk (2021) (0)
- Time-Dependent Damage Evolution of Reinforced Concrete Bridge Piers: Implications for Multihazard Analysis (2023) (0)
- SIMPLIFIED PERFORMANCE-BASED DESIGN OF NEESWOOD CAPSTONE BUILDING AND PRE-TEST PERFORMANCE EVALUATION (2010) (0)
- Hazard-based hurricane loss estimation including climate change impacts (2018) (0)
- Wood Floor Joist Rupture and System Serviceability (1995) (0)
- Serviceability System Factor for Design of Wood Floors (1996) (0)
- Mitigation of Wind-Created Risks During Construction (1993) (0)
- Theoretical Joist-Rupture Sequences in Wood-Floor System Model (1996) (0)
- Damage, Shelter, and Other Performance Issues for Buildings in High Wind Regions (2002) (0)
- Joint wind-snow hazard characterization for performance-based design (2014) (0)
- Closure to “Calibration of Current Factors in LRFD for Steel” by David V. Rosowsky (1996) (0)
- Conclusions for Engineers and Policy Makers (2021) (0)
- Hurricane hazard characterization for performance-based design (2011) (0)
- Hazard-level specific hurricane event characterization (2011) (0)
- Serviceability Reliability Analysis of Wood Beams (1993) (0)
- TOWARDS A PERFORMANCE-BASED SEISMIC DESIGN PROCEDURE FOR WOODFRAME CONSTRUCTION (2007) (0)
- Reliability of Wood Members Designed using Current Standards (2004) (0)
- Construction Shoring Load Measurements (1995) (0)
- Performance-based direct displacement design of engineered timber building in seismic regions (2011) (0)
This paper list is powered by the following services:
Other Resources About David Rosowsky
What Schools Are Affiliated With David Rosowsky?
David Rosowsky is affiliated with the following schools:
