Denis Rodrigue
#135,495
Most Influential Person Now
Engineer and university professor
Denis Rodrigue's AcademicInfluence.com Rankings
Denis Rodrigueengineering Degrees
Engineering
#4849
World Rank
#6071
Historical Rank
Mechanical Engineering
#418
World Rank
#461
Historical Rank
Applied Physics
#1280
World Rank
#1309
Historical Rank
Download Badge
Engineering
Why Is Denis Rodrigue Influential?
(Suggest an Edit or Addition)Denis Rodrigue's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Membrane gas separation technologies for biogas upgrading (2015) (273)
- Wetting phenomenon in membrane contactors – Causes and prevention (2014) (213)
- Amine-Functionalized MIL-53 Metal–Organic Framework in Polyimide Mixed Matrix Membranes for CO2/CH4 Separation (2012) (181)
- A Review on Porous Polymeric Membrane Preparation. Part I: Production Techniques with Polysulfone and Poly (Vinylidene Fluoride) (2019) (176)
- A Bootstrap-VIP approach for selecting wavelength intervals in spectral imaging applications (2010) (160)
- Viscoelastic properties of dispersed chitosan/xanthan hydrogels (2007) (155)
- Mixed matrix membranes based on amine and non-amine MIL-53(Al) in Pebax® MH-1657 for CO 2 separation (2018) (144)
- Oil displacement mechanisms of viscoelastic polymers in enhanced oil recovery (EOR): a review (2014) (139)
- Structural, mechanical and thermal properties of bio-based hybrid composites from waste coir residues: Fibers and shell particles (2016) (133)
- Critical Experimental Comparison between Five Techniques for the Determination of Interfacial Tension in Polymer Blends: Model System of Polystyrene/Polyamide-6 (2000) (130)
- Colloidal Properties of Bio-oils Obtained by Vacuum Pyrolysis of Softwood Bark. Characterization of Water-Soluble and Water-Insoluble Fractions (2004) (120)
- Optimization of continuous phase in amino-functionalized metal–organic framework (MIL-53) based co-polyimide mixed matrix membranes for CO2/CH4 separation (2013) (117)
- Mechanical and thermal properties of hybrid composites: Oil-palm fiber/clay reinforced high density polyethylene (2016) (116)
- In-situ cross interface linking of PIM-1 polymer and UiO-66-NH2 for outstanding gas separation and physical aging control (2018) (110)
- Mechanical, rheological, morphological and water absorption properties of maleated polyethylene/hemp composites: Effect of ground tire rubber addition (2013) (109)
- A Review on Porous Polymeric Membrane Preparation. Part II: Production Techniques with Polyethylene, Polydimethylsiloxane, Polypropylene, Polyimide, and Polytetrafluoroethylene (2019) (104)
- Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers (2020) (99)
- Cell morphology analysis of high density polymer foams (2005) (98)
- Effect of silane functionalization on properties of polypropylene/clay nanocomposites (2018) (95)
- Polymer functionalization to enhance interface quality of mixed matrix membranes for high CO2/CH4 gas separation (2015) (93)
- Crosslinked MOF-polymer to enhance gas separation of mixed matrix membranes (2016) (87)
- Mixed matrix membranes of aminosilanes grafted FAU/EMT zeolite and cross-linked polyimide for CO2/CH4 separation (2012) (85)
- Bio-composites based on polylactic acid and argan nut shell: Production and properties. (2017) (83)
- Compatibilization of kraft lignin‐polyethylene composites using unreactive compatibilizers (2014) (82)
- Biocomposites based on Argan nut shell and a polymer matrix: Effect of filler content and coupling agent. (2016) (80)
- Influence of coupling agent content on the properties of high density polyethylene composites reinforced with oil palm fibers (2014) (76)
- Current Issues and Challenges in Polypropylene Foaming: A Review (2015) (76)
- THE EFFECT OF CARBON NANOTUBE ORIENTATION AND CONTENT ON THE MECHANICAL PROPERTIES OF POLYPROPYLENE BASED COMPOSITES (2014) (72)
- Recycling Waste Tires into Ground Tire Rubber (GTR)/Rubber Compounds: A Review (2020) (71)
- Facile production of biodegradable PCL/PLA in situ nanofibrillar composites with unprecedented compatibility between the blend components (2018) (70)
- An experimental study of the effect of surfactants on the free rise velocity of gas bubbles (1996) (70)
- Mechanical and rheological behavior of highly filled polystyrene with lignin (2012) (70)
- Effect of fiber content and surface treatment on the mechanical properties of natural fiber composites produced by rotomolding (2017) (68)
- Generalized correlation for bubble motion (2001) (68)
- Rotational molding of polyethylene composites based on agave fibers (2012) (66)
- Comparison between ZIF-67 and ZIF-8 in Pebax® MH-1657 mixed matrix membranes for CO2 separation (2020) (65)
- A comparison between bio- and mineral calcium carbonate on the properties of polypropylene composites (2017) (62)
- A rheological criterion to determine the percolation threshold in polymer nano-composites (2014) (62)
- Cellular Polymer Ferroelectret: A Review on Their Development and Their Piezoelectric Properties (2018) (61)
- Effect of hybridization on the physical and mechanical properties of high density polyethylene-(pine/agave) composites (2014) (61)
- The effect of injection molding conditions on the morphology of polymer structural foams (2009) (58)
- Mechanical Properties and Flow Behavior of Polymers for Enhanced Oil Recovery (2014) (57)
- Effect of wood powder on polymer foam nucleation (2006) (51)
- Effect of Mold Temperature on Morphology and Mechanical Properties of Injection Molded HDPE Structural Foams (2008) (51)
- Preparation and morphology of polypropylene/wood flour composite foams via extrusion (2005) (51)
- Mechanical, water absorption, and aging properties of polypropylene/flax/glass fiber hybrid composites (2015) (51)
- Thermal conductivity of architected cellular metamaterials (2019) (50)
- Effect of Hybridization and Compatibilization on the Mechanical Properties of Recycled Polypropylene-Hemp Composites (2012) (49)
- Effect of thermal annealing on the mechanical and thermal properties of polylactic acid–cellulosic fiber biocomposites (2016) (49)
- Rheological properties of polypropylene/hemp fiber composites (2009) (48)
- Effect of fiber treatment on the water absorption and mechanical properties of hemp fiber/polyethylene composites (2013) (48)
- On the characterization of polymer powders mixing dynamics by texture analysis (2008) (46)
- Amine-Functionalized CuBTC/poly(ether-b-amide-6) (Pebax® MH 1657) Mixed Matrix Membranes for CO2/CH4 Separation† (2017) (46)
- High density polyethylene foams. II. Elastic modulus (2003) (45)
- Diamino-organosilicone APTMDS: A new cross-linking agent for polyimides membranes (2012) (45)
- Polylactic acid–agave fiber biocomposites produced by rotational molding: A comparative study with compression molding (2018) (44)
- A General Correlation for the Rise Velocity of Single Gas Bubbles (2008) (44)
- High‐density polyethylene foams. I. Polymer and foam characterization (2003) (44)
- Morphology and Mechanical Properties of Foamed Polyethylene-Polypropylene Blends (2005) (43)
- Injection Molding of Postconsumer Wood–Plastic Composites I: Morphology (2006) (42)
- Effect of Maleated PLA on the Properties of Rotomolded PLA-Agave Fiber Biocomposites (2018) (42)
- Mechanical, thermal, and rheological properties of polypropylene hybrid composites based clay and graphite (2017) (41)
- Effect of coupling agent content and water absorption on the mechanical properties of coir‐agave fibers reinforced polyethylene hybrid composites (2016) (41)
- Mechanical and morphological properties of wood plastic composites based on municipal plastic waste (2013) (40)
- The effect of fibre and coupling agent content on the mechanical properties of hemp/polypropylene composites (2007) (40)
- Hybrid composites based on polyethylene and coir/oil palm fibers (2015) (40)
- Effect of macrovoids in nano-silica/polyimide mixed matrix membranes for high flux CO2/CH4 gas separation (2014) (38)
- High density polyethylene foams. IV. Flexural and tensile moduli of structural foams (2003) (38)
- Morphological, thermal, mechanical, and rheological properties of high density polyethylene reinforced with Illite clay (2018) (37)
- Injection Molding of Postconsumer Wood–Plastic Composites II: Mechanical Properties (2006) (36)
- Non-isothermal decomposition kinetics of azodicarbonamide in high density polyethylene using a capillary rheometer (2008) (36)
- Equivalent continuum models of carbon nanotube reinforced polypropylene composites (2013) (36)
- Bubble velocities: further developments on the jump discontinuity (1998) (35)
- Evaluation of Two New Self-assembly Polymeric Systems for Enhanced Heavy Oil Recovery (2014) (35)
- The slow motion of a single gas bubble in a non-Newtonian fluid containing surfactants (1999) (34)
- Rotomolded polyethylene‐agave fiber composites: Effect of fiber surface treatment on the mechanical properties (2016) (34)
- Drag coefficient—reynolds number transition for gas bubbles rising steadily in viscous fluids (2001) (34)
- Linear and non-linear viscoelastic properties of ethylene vinyl acetate/nano-crystalline cellulose composites (2012) (33)
- A simple correlation for gas bubbles rising in power‐law fluids (2002) (33)
- Improving the Compatibility and Mechanical Properties of Natural Fibers/Green Polyethylene Biocomposites Produced by Rotational Molding (2020) (32)
- Enhancing CO2 separation performance of Pebax® MH-1657 with aromatic carboxylic acids (2019) (32)
- Highly filled thermoplastic elastomers from ground tire rubber, maleated polyethylene and high density polyethylene (2013) (32)
- A hyperspectral imaging sensor for on-line quality control of extruded polymer composite products (2011) (32)
- Drag on non-spherical particles in non-newtonian fluids (1994) (32)
- Enhanced electroactive β phase in three phase PVDF/CaCO3/nanoclay composites: Effect of micro-CaCO3 and uniaxial stretching (2017) (31)
- Morphology and Mechanical Properties of Maple Reinforced LLDPE Produced by Rotational Moulding: Effect of Fibre Content and Surface Treatment (2018) (31)
- Polymer powders mixing part I: Mixing characterization in rotating cylinders (2010) (31)
- Extrusion blow molding of a starch–gelatin polymer matrix reinforced with cellulose (2015) (31)
- Effect of Particle Size and Shape on the Reinforcing Efficiency of Nanoparticles in Polymer Nanocomposites (2014) (31)
- Polymerization compounding of polyurethane-fumed silica composites (2006) (30)
- Effect of nanocrystalline cellulose on morphological, thermal, and mechanical properties of Nylon 6 composites (2016) (30)
- Phosphogypsum Waste Used as Reinforcing Fillers in Polypropylene Based Composites: Structural, Mechanical and Thermal Properties (2017) (30)
- Steady-shear rheology of concentrated chitosan solutions (2004) (30)
- Architected multi-directional functionally graded cellular plates (2018) (29)
- Effect of hemp surface modification on the morphological and tensile properties of linear medium density polyethylene (LMDPE) composites (2016) (29)
- Degradation behavior of maleated polyethylene/ground tire rubber thermoplastic elastomers with and without stabilizers (2013) (29)
- Synergistic improvement of piezoelectric properties of PVDF/ CaCO 3 /montmorillonite hybrid nanocomposites (2018) (29)
- Effect of agave fiber surface treatment on the properties of polyethylene composites produced by dry‐blending and compression molding (2017) (28)
- Simultaneous optimization of the mechanical properties of postconsumer natural fiber/plastic composites: Phase compatibilization and quality/cost ratio (2014) (28)
- Production of Thermoplastic Elastomers Based on Recycled PE and Ground Tire Rubber: Morphology, Mechanical Properties and Effect of Compatibilizer Addition (2018) (28)
- Influence of graphene oxide and graphene nanosheet on the properties of polyvinylidene fluoride nanocomposites (2018) (28)
- Comparison of the mechanical properties between carbon nanotube and nanocrystalline cellulose polypropylene based nano-composites (2015) (28)
- Utilization of volcanic amorphous aluminosilicate rocks (perlite) as alternative materials in lightweight composites (2019) (28)
- Hybrid composites and intra-ply hybrid composites based on jute and glass fibers: A comparative study on moisture absorption and mechanical properties (2020) (28)
- Polymer powders mixing part II: Multi-component mixing dynamics using RGB color analysis (2010) (28)
- Alfa fibers/clay hybrid composites based on polypropylene (2018) (27)
- The effect of density profile on the flexural properties of structural foams (2007) (27)
- Morphological, thermal, mechanical, electrical and magnetic properties of ABS/PA6/SBR blends with Fe3O4 nano-particles (2017) (27)
- Laminated epoxy biocomposites based on clay and jute fibers (2017) (27)
- Ldpe/Agave Fibre Composites: Effect of Coupling Agent and Weld Line on Mechanical and Morphological Properties (2008) (27)
- Potential of Hyperspectral Imaging for Quality Control of Polymer Blend Films (2009) (27)
- Novel self‐assembling polymeric system based on a hydrophobic modified copolymer: formulation, rheological characterization, and performance in enhanced heavy oil recovery (2014) (27)
- Effect of friction coefficient and density on mixing particles in the rolling regime (2011) (26)
- Compatibilization efficiency in post-consumer recycled polyethylene/polypropylene blends: Effect of contamination (2015) (26)
- Unmodified and esterified Kraft lignin‐filled polyethylene composites: Compatibilization by free‐radical grafting (2015) (26)
- Morphology of Extruded PP/HDPE Foam Blends (2006) (26)
- The Effect of Skin Thickness on the Mechanical Properties of Structural Foams (2004) (26)
- Ultrasonic abrasive μ-machining with thermoplastic tooling (2008) (26)
- Understanding the Regeneration of EPDM Rubber Crumbs from Used Tyres (2010) (26)
- Tensile Properties of Polymerization-Filled Kevlar Pulp/Polyethylene Composites (2004) (25)
- Characterization of UHMWPE/wood composites produced via dry‐blending and compression molding (2013) (25)
- A Comparison between Several Commercial Polymer Hollow Fiber Membranes for Gas Separation (2017) (25)
- N-Silylated Benzothiazolium Dye as a Coupling Agent for Polylactic Acid/Date Palm Fiber Bio-composites (2019) (25)
- Morphological and Mechanical Properties of Bilayers Wood-Plastic Composites and Foams Obtained by Rotational Molding (2020) (24)
- Improved viscoelasticity of xanthan gum through self‐association with surfactant: β‐cyclodextrin inclusion complexes for applications in enhanced oil recovery (2015) (24)
- Phenol–formaldehyde–pyrolytic oil resins for wood preservation: A rheological study (2007) (24)
- Piezoelectric cellular polymer films: Fabrication, properties and applications (2018) (24)
- Mixed matrix membranes based on silica nanoparticles and microcellular polymers for CO2/CH4 separation (2016) (24)
- Relationships between linear and nonlinear shear response of polymer nano-composites (2012) (24)
- Chemical alteration of LDPE hollow fibers exposed to monoethanolamine solutions used as absorbent for CO2 capture process (2011) (24)
- Thermal Analysis of Highly Filled Composites of Polystyrene with Lignin (2013) (23)
- Nano‐crystalline cellulose, chemical blowing agent, and mold temperature effect on morphological, physical/mechanical properties of polypropylene (2015) (23)
- Fatigue behavior of polystyrene (PS) analyzed from the Fourier transform (FT) of stress response: First evidence of I 2/1 (N) and I 3/1 (N) as new fingerprints (2017) (23)
- The effect of benzothiazolium surfactant modified montmorillonite content on the properties of polyamide 6 nanocomposites (2020) (23)
- Impact modification of polypropylene‐based composites using surface‐coated waste rubber crumbs (2014) (23)
- Asymmetric microcellular composites: Morphological properties (2014) (22)
- High density polyethylene foams. III. Tensile properties (2003) (22)
- Mechanical and Morphological Properties of Flax Fiber Reinforced High Density Polyethylene/Recycled Rubber Composites (2012) (22)
- Morphological and mechanical characterization of foamed polyethylene via biaxial rotational molding (2015) (22)
- A Comparison between Sabra and Alfa Fibers in Rubber Biocomposites (2019) (22)
- Optimizing membrane module for biogas separation (2019) (22)
- Transverse mixing of polymer powders in a rotary cylinder part I: Active layer characterization (2012) (21)
- Highly hydrophobic microporous low-density polyethylene hollow fiber membranes by melt-extrusion coupled with salt-leaching technique (2013) (21)
- Rotational molding of self‐hybrid composites based on linear low‐density polyethylene and maple fibers (2018) (21)
- Torsion Properties of High Density Polyethylene Foams (2003) (21)
- The Effect of Recycling on LDPE Foamability : Elongational Rheology (2008) (21)
- Chemistry, Processing, Properties, and Applications of Rubber Foams (2021) (21)
- Flexural behavior of asymmetric structural foams (2009) (21)
- Mechanical properties of polypropylene structural foams with fiber-reinforced skins (2011) (20)
- Influence of post-extrusion parameters on the final morphology of polystyrene/high density polyethylene blends (2003) (20)
- Graphene/montmorillonite hybrid nanocomposites based on polypropylene: Morphological, mechanical, and rheological properties (2018) (20)
- Injection molded self-hybrid composites based on polypropylene and natural fibers (2014) (20)
- Mechanical properties prediction of polypropylene/short coir fibers composites using a self-consistent approach (2018) (20)
- Biodegradability and improved mechanical performance of polyhydroxyalkanoates/agave fiber biocomposites compatibilized by different strategies (2020) (20)
- AC and DC electrical behavior of MWCNT/epoxy nanocomposite near percolation threshold: Equivalent circuits and percolation limits (2018) (20)
- The effect of polyester recycled tire fibers mixed with ground tire rubber on polyethylene composites. Part I (2018) (20)
- Bubble velocity jump discontinuity in polyacrylamide solutions: a photographic study (1999) (20)
- On-line prediction of crystallinity spatial distribution across polymer films using NIR spectral imaging and chemometrics methods (2008) (20)
- Rotomolding of Thermoplastic Elastomers Based on Low-Density Polyethylene and Recycled Natural Rubber (2019) (20)
- Mixed matrix membranes based on NH2-MIL-53 (Al) and 6FDA-ODA polyimide for CO2 separation: Effect of the processing route on improving MOF-polymer interfacial interaction (2021) (19)
- Influence of molecular properties on the mechanical fatigue of polystyrene (PS) analyzed via Wöhler curves and Fourier Transform rheology (2018) (19)
- Improved CO2 transport properties of Matrimid membranes by adding amine-functionalized PVDF and MIL-101(Cr) (2020) (19)
- Morphology development of polypropylene cellular films for piezoelectric applications (2012) (18)
- Polymer ferroelectret based on polypropylene foam: piezoelectric properties prediction using dynamic mechanical analysis (2017) (18)
- Design analysis of three-layered structural composites based on post-consumer recycled plastics and wood residues (2013) (18)
- Formulation of a Self‐Assembling Polymeric Network System for Enhanced Oil Recovery Applications (2014) (18)
- Techno-economic evaluation of membrane and enzymatic-absorption processes for CO2 capture from flue-gas (2020) (18)
- Insights into interphase thickness characterization for graphene/epoxy nanocomposites: a molecular dynamics simulation. (2019) (18)
- THE SLOW MOTION OF A SPHERICAL PARTICLE IN A CARREAU FLUID (1996) (18)
- Foams and Wood Composite Foams Produced by Rotomolding (2013) (18)
- A closer look on the development and commercialization of membrane contactors for mass transfer and separation processes (2019) (17)
- Effect of nylon 6 (PA6) addition on the properties of glass fiber reinforced acrylonitrile‐butadiene‐styrene (2018) (17)
- Self-hybridization and Coupling Agent Effect on the Properties of Natural Fiber/HDPE Composites (2015) (17)
- Polypropylene reinforced with nanocrystalline cellulose: Coupling agent optimization (2015) (17)
- Effect of surface modification on the interface quality between hemp and linear medium‐density polyethylene (2016) (17)
- Dynamic Rheological Properties of Concentrated Chitosan Soltions (2004) (17)
- Optimization of the cellular morphology of biaxially stretched thin polyethylene foams produced by extrusion film blowing (2018) (17)
- Properties of Recycled PS/SBR Blends: Effect of SBR Pretreatment (2016) (16)
- Morphology and properties of polystyrene/agave fiber composites and foams (2013) (16)
- Effect of annealing on gas permeability and mechanical properties of polylactic acid/talc composite films (2017) (16)
- Morphological, rheological, and mechanical properties of hybrid elastomeric foams based on natural rubber, nanoclay, and nanocarbon black (2019) (16)
- Morphological, chemical and thermal stability of microporous LDPE hollow fiber membranes in contact with single and mixed amine based CO2 absorbents (2012) (15)
- Effect of Processing Conditions on the Cellular Morphology of Polypropylene Foamed Films for Piezoelectric Applications (2017) (15)
- Validity of the modified molecular stress function theory to predict the rheological properties of polymer nanocomposites (2013) (15)
- Effect of immobilizing ionic liquid on amine-functionalized MIL-101(Cr) incorporated in Matrimid membranes for CO2/CH4 separation (2021) (15)
- Mechanical Properties of Recycled Polypropylene/SBR Rubber Crumbs Blends Reinforced by Birch Wood Flour (2012) (15)
- Reinforcement of maleated polyethylene/ground tire rubber thermoplastic elastomers using talc and wood flour (2014) (15)
- Morphological, physical and mechanical properties of nanocrystalline cellulose filled Nylon 6 foams (2017) (15)
- Injection molding of short coir fiber polypropylene biocomposites: Prediction of the mold filling phase (2019) (15)
- Comparison between polyethylene glycol and tributyl citrate to modify the properties of wood fiber/polylactic acid biocomposites (2019) (15)
- Hybrid nanocellulose/carbon nanotube/natural rubber nanocomposites with a continuous three‐dimensional conductive network (2022) (15)
- Polystyrene/Recycled Sbr Powder Compounds Produced in An Internal Batch Mixer (2014) (15)
- Fatigue analysis of brittle polymers via Fourier transform of the stress (2019) (15)
- The effect of polyester recycled tire fibers mixed with ground tire rubber on polyethylene composites. Part II (2018) (15)
- Polymer ferroelectret based on polypropylene foam: Piezoelectric properties improvement using post‐processing thermomechanical treatment (2017) (14)
- Polyethylene Foams Produced under a Temperature Gradient with Expancel and Blends Thereof (2010) (14)
- Correlation between Performances of Hollow Fibers and Flat Membranes for Gas Separation (2018) (14)
- Compatibilization of PA6/ABS blend by SEBS-g-MA: morphological, mechanical, thermal, and rheological properties (2020) (14)
- Effect of Feeding Strategy on the Mechanical Properties of PP/Recycled EPDM/PP-G-MA Blends (2014) (14)
- Simulation of gas separation using partial element stage cut modeling of hollow fiber membrane modules (2018) (14)
- Piezoelectric property improvement of polyethylene ferroelectrets using postprocessing thermal-pressure treatment (2018) (14)
- Value‐added derivatives of soda lignin from alfa grass (Stipa tenacissima). I. Modification and characterization (2010) (14)
- Thermoplastic vulcanizate nanocomposites based on polyethylene/reclaimed rubber: A correlation between carbon nanotube dispersion state and electrical percolation threshold (2019) (13)
- Highly porous lignin composites for dye removal in batch and continuous-flow systems (2020) (13)
- Rotational Molding of Polymer Composites Reinforced with Natural Fibers: This review article reveals some efforts towards making rotomoldings tougher and more sustainable (2015) (13)
- Atomistic simulation of interfacial properties and damage mechanism in graphene nanoplatelet/epoxy composites (2020) (13)
- Effect of Weld Lines on the Injection Moulding of Structural Foams. I. Foam Morphology (2005) (13)
- Characterization of recycled styrene butadiene rubber ground tire rubber: Combining X-ray fluorescence, differential scanning calorimetry, and dynamical thermal analysis for quality control (2015) (13)
- Biobased 2,5-furandicarboxylic acid (FDCA) and its emerging copolyesters’ properties for packaging applications (2021) (13)
- Value‐added derivatives of soda lignin Alfa grass (Stipa tenacissima). II. Uses as lubricants in plastic processing (2009) (12)
- Flexural Modulus of Symmetric and Asymmetric Structural Foams (2009) (12)
- EPDM RECYCLED RUBBER POWDER CHARACTERIZATION: THERMAL AND THERMOGRAVIMETRIC ANALYSIS (2014) (12)
- Properties of Poplar Fiber/PLA Composites: Comparison on the Effect of Maleic Anhydride and KH550 Modification of Poplar Fiber (2020) (12)
- Valorization of Spent Coffee Grounds as Precursors for Biopolymers and Composite Production (2022) (12)
- Effect of Feeding Strategy on the Properties of PP/Recycled EPDM Blends (2015) (12)
- Rotomolding of Foamed and Unfoamed GTR-LLDPE Blends: Mechanical, Morphological and Physical Properties (2018) (12)
- Density Graded Linear Medium Density Polyethylene Foams Produced under a Temperature Gradient with Expancel Microbeads (2011) (12)
- Polymer hollow fiber membranes for gas separation: A comparison between three commercial resins (2019) (12)
- Microcellular Agave Fibre-High Density Polyethylene Composites Produced by Injection Molding (2012) (12)
- Preparation and characterization of multilayer foamed composite by rotational molding (2016) (12)
- Tensile Modulus Prediction of Structural Foams using Density Profiles (2008) (12)
- Characterization of polymer powder motion in a spherical mold in biaxial rotation (2012) (12)
- Characterization of Doba–Chad heavy crude oil in relation with the feasibility of pipeline transportation (2004) (11)
- Bubble drag in contaminated non‐newtonian solutions (1997) (11)
- A note on the drag coefficient of a single gas bubble in a power‐law fluid (1999) (11)
- Fiber-matrix interface improvement via glycidyl methacrylate compatibilization for rotomolded poly(lactic acid)/agave fiber biocomposites (2020) (11)
- Polyethylene-Kevlar Composite Foams III: Torsion Properties (2005) (11)
- Lowering the viscosity of Doba-Chad heavy crude oil for pipeline transportation: The hydrovisbreaking approach (2004) (11)
- Production and Characterization of Gelatin-Starch Polymer Matrix Reinforced with Cellulose Fibers (2015) (11)
- Effect of Modified Eucalyptus nitens Lignin on the Morphology and Thermo-mechanical Properties of Recycled Polystyrene (2014) (11)
- Effect of particle size, fiber content, and surface treatment on the mechanical properties of maple-reinforced LLDPE produced by rotational molding (2020) (11)
- High Density Polyethylene Degradation Followed by Closed-loop Recycling (2017) (11)
- Mechanical characterization of asymmetric high density polyethylene/hemp composite sandwich panels with and without a foam core (2015) (11)
- Asymmetric microcellular composites: Mechanical properties and modulus prediction (2016) (11)
- Calorimetric and rheological study of isocyanate–pyrolysis oil blends (2003) (11)
- Experimental and finite element simulation of natural rubber foams using real 3D structures (2020) (11)
- Longitudinal segregation of polymer powder in a rotating cylinder (2011) (10)
- Production and Characterization of Hybrid Polymer Composites Based on Natural Fibers (2016) (10)
- Energy absorption capacity of ferroelectrets based on porous polypropylene (2018) (10)
- Low Velocity Impact Behaviour of Asymmetric Three-layer Sandwich Composite Structures with and without Foam Core (2017) (10)
- Prediction of the Shear Modulus of Polymer Structural Foams (2009) (10)
- Density Graded Polyethylene Foams Produced by Compression Moulding Using a Chemical Blowing Agent (2012) (10)
- Fatigue life prediction via the time-dependent evolution of linear and nonlinear mechanical parameters determined via Fourier transform of the stress (2018) (10)
- Film Processability, Morphology, and Properties of Polyamide-6/Low Density Polyethylene Blends (2007) (10)
- Recent Advances in Polymer Recycling: A Short Review (2017) (10)
- Production of Composite Membranes by Coupling Coating and Melt Extrusion/Salt Leaching (2017) (10)
- Effect of conductive particles on the mechanical, electrical, and thermal properties of maleated polyethylene (2015) (10)
- Characterization of PLA-talc films using NIR chemical imaging and Multivariate Image Analysis techniques (2018) (10)
- Ground tire rubber (GTR) surface modification using thiol-ene click reaction: Polystyrene grafting to modify a GTR/polystyrene (PS) blend (2020) (9)
- Time and thermal stability improvement of polyethylene ferroelectrets (2019) (9)
- Multivariate Image Regression for Quality Control of Natural Fiber Composites (2013) (9)
- Compression Moulding of Polypropylene Foams and Their Properties (2008) (9)
- Effect of surface treatment on the physical and mechanical properties of injection molded poly(lactic acid)‐coir fiber biocomposites (2018) (9)
- Rheological characterization of polyethylene/polyester recycled tire fibers/ground tire rubber composites (2018) (9)
- Surface Remobilization of Gas Bubbles in Polymer Solutions Containing Surfactants (2002) (9)
- New Multi-Scale Hybrid System Based on Maple Wood Flour and Nano Crystalline Cellulose: Morphological, Mechanical and Physical Study (2016) (9)
- Flexural modulus prediction of symmetric structural polymer foams with complex density profiles (2011) (9)
- Properties of Recycled LDPE/Birch Fibre Composites (2011) (9)
- Long-term closed-loop recycling of high-density polyethylene/flax composites (2018) (9)
- Accelerated Ageing of Alkali Treated Olive Husk Flour Reinforced Polylactic Acid (PLA) Biocomposites: Physico-Mechanical Properties (2018) (9)
- Dynamics of the α-relaxation during the crystallization of PLLA and the effect of thermal annealing under humid atmosphere (2019) (9)
- Thermal analysis of foamed polyethylene rotational molding followed by internal air temperature profiles (2018) (8)
- Combination of Esterified Kraft Lignin and MAPE as Coupling Agent for Bark/HDPE Composites (2013) (8)
- Properties of Nano-composites Based on Different Clays and Polyamide 6/Acrylonitrile Butadiene Styrene Blends (2019) (8)
- Morphology and Mechanical Properties of Foamed Polyethylene Blends (2003) (8)
- Effect of Weld Lines on the Injection Moulding of Structural Foams. II Mechanical Properties (2006) (8)
- Gas Separation Properties of Mixed Matrix Membranes based on Polyimide and Graphite Oxide (2020) (8)
- Mechanical and thermal properties of polyethylene/carbon nanofiber composites produced by rotational molding (2020) (8)
- Mechanical Properties of Density Graded Foams: Tensile Properties (2013) (8)
- Preparation and characterization of HDPE/PA6 foam blends (2011) (8)
- High Purity Softwood Lignin Obtained by an Eco-Friendly Organosolv Process (2021) (8)
- Production and Characterization of High Density Polyethylene Reinforced by Eucalyptus Capsule Fibers (2018) (8)
- Rotational Molding of Poly(Lactic Acid)/Polyethylene Blends: Effects of the Mixing Strategy on the Physical and Mechanical Properties (2021) (8)
- Mechanical fatigue of biodegradable polymers: A study on polylactic acid (PLA), polybutylene succinate (PBS) and polybutylene adipate terephthalate (PBAT) (2022) (8)
- Cumulative nonlinearity as a parameter to quantify mechanical fatigue (2020) (8)
- Effect of Temperature on the Thermal Conductivity of Wood-Plastic Composites (2013) (8)
- Effect of Ground Tire Rubber (GTR) Particle Size and Content on the Morphological and Mechanical Properties of Recycled High-Density Polyethylene (rHDPE)/GTR Blends (2021) (8)
- Simultaneous optimization of the mechanical properties of postconsumer natural fiber/plastic composites: Processing analysis (2015) (8)
- Compression Molding of Polyethylene Foams under a Temperature Gradient: Morphology and Flexural Modulus (2009) (8)
- Effect of Freeze-Line Position and Stretching Force on the Morphology of LDPE-PA6 Blown Films (2006) (7)
- Towards novel super‐elastic foams based on isoperene rubber: Preparation and characterization (2020) (7)
- Morphological, mechanical, and thermal properties of injection molded polylactic acid foams/composites based on wood flour (2016) (7)
- Biocomposites of Flax Fiber and Polylactic Acid: Processing and Properties (2014) (7)
- Injection molding of short fiber thermoplastic bio-composites: Prediction of the fiber orientation (2020) (7)
- Multivariate image analysis for inspection of multilayer films (2014) (7)
- Mechanical performance of polyethylene (PE)-based biocomposites (2015) (7)
- Assessment of thermo-mechanical, dye discoloration, and hygroscopic behavior of hybrid composites based on polypropylene/clay (illite)/TiO2 (2021) (7)
- Effect of glass bead size and content on the thermomechanical properties of polyethylene composites (2018) (7)
- Functionalized Graphene–Reinforced Foams Based on Polymer Matrices (2019) (7)
- Effect of EPDM Particles Size on its Thermo-Mechanical Regeneration (2012) (7)
- Effect of Topology and Molecular Properties on the Rheology and Fatigue Behavior of Solid Polystyrene/Polyisoprene Di- and Triblock Copolymers (2020) (7)
- Measurements of the size of the secondary flow regions generated by a torsionally oscillating disk in a linearly stratified fluid (1986) (7)
- Characterization and numerical simulation of laminated glass fiber–polyester composites for a prosthetic running blade (2020) (7)
- Effect of processing conditions on the cellular morphology of polyethylene hollow fiber foams for membrane applications (2018) (7)
- Using Density Profiles to Predict the Flexural Modulus of Structural Polymer Foams (2008) (7)
- Effect of the inflation strategy on the piezoelectric response of cellular poly(vinylidene fluoride) ferroelectret (2019) (6)
- Optimizing the Performance of Natural Fiber Reinforced Plastics Composites: Influence of Combined Optimization Paths on Microstructure and Mechanical Properties (2015) (6)
- Effect of Wood Fiber Surface Treatment on the Properties of Recycled HDPE/Maple Fiber Composites (2021) (6)
- The Effect of Recycling on LDPE Foam Properties (2008) (6)
- Surface modification of cellulosic materials for polyethylene composite applications (2019) (6)
- Morphological and Mechanical Properties of Thermoplastic Elastomers Based on Recycled High Density Polyethylene and Recycled Natural Rubber (2021) (6)
- Magnetic soft silicone elastomers with tunable mechanical properties for magnetically actuated devices (2020) (6)
- Effect of Coupling Agent and Ground Tire Rubber Content on the Properties of Natural Fiber Polymer Composites (2016) (6)
- Recycled Polystyrene Composites Reinforced With Esterified and Non-Esterified Kraft Lignins (2014) (6)
- Rheology of co‐continuous phase in physical thermoplastic elastomers (2004) (6)
- Effect of Nano-Particles on Flow and Recovery of Polymer Nano-Composites in the Melt State (2013) (6)
- Impact of compression molding conditions on the thermal and mechanical properties of polyethylene (2018) (6)
- Density graded polyethylene foams: Effect of processing conditions on mechanical properties (2019) (6)
- Morphological, thermal and mechanical properties of recycled HDPE foams via rotational molding (2021) (5)
- Thermoplastic Elastomer Foams Based on Recycled Rubber (2014) (5)
- Combining mechanical and thermal surface fourier transform analysis to follow the dynamic fatigue behavior of polymers (2021) (5)
- Influence of lignin structure change during extrusion on properties and recycling of lignin‐polyethylene thermoplastic composites (2020) (5)
- Rheological behavior of composites made from linear medium-density polyethylene and hemp fibers treated by surface-initiated catalytic polymerization (2018) (5)
- Cellulose and lignin as carbon black replacement in natural rubber (2022) (5)
- Polyethylene-Kevlar Composite Foams II: Mechanical Properties (2004) (5)
- A computational approach to evaluate the nonlinear and noisy DC electrical response in carbon nanotube/polymer nanocomposites near the percolation threshold (2020) (5)
- Polyethylene-Kevlar Composite Foams I: Morphology (2003) (5)
- Polymer-based Membranes for Propylene/Propane Separation (2021) (5)
- The Effect of Post-extrusion Conditions in Ribbon Extrusion of Polymer Blends (2006) (5)
- Postconsumer high-density polyethylene/agave fiber foamed composites coated with chitosan for the removal of heavy metals (2010) (5)
- Fiber-particle morphological transition and its effect on impact strength of PS/HDPE blends (2008) (5)
- Polymerization compounding of hemp fibers to improve the mechanical properties of linear medium density polyethylene composites (2018) (5)
- Flexural and compressive strengths of carbon nanotube reinforced cementitious composites as a function of curing time (2022) (5)
- Printability and properties of 3D-printed poplar fiber/polylactic acid biocomposite (2021) (5)
- Phase morphology, mechanical, and thermal properties of fiber-reinforced thermoplastic elastomer: Effects of blend composition and compatibilization (2021) (5)
- Using Chitosan as a Nucleation Agent in Thermoplastic Foams for Heavy Metal Adsorption (2009) (5)
- Analysis of multiaxial properties of carbon nanotubes/polypropylene and nanocrystalline cellulose/polypropylene composites (2016) (5)
- Effect of fibre and coupling agent contents on water absorption and flexural modulus of wood fibre polyethylene composites (2014) (4)
- Film processability and properties of polycaprolactone/thermoplastic starch blends (2012) (4)
- Effect of multi-wall carbon nanotubes on the flexural performance of cement based composites (2021) (4)
- Rotational molding of compatibilized PA6/LLDPE blends (2021) (4)
- Cellular Morphology Optimization of Polypropylene/CaCO3 Composite Films Designed for Piezoelectric Applications (2018) (4)
- Hybrid Composite Foams Based on Nanoclays and Natural Fibres (2016) (4)
- Mechanical and Thermal Properties of Functionally Graded Polyolefin Elastomer Foams (2022) (4)
- Recycled tires shreds based polyurethane binder: Production and characterization (2020) (4)
- The Effect of Composition on Impact Properties of Foamed HDPE/PP Blends (2006) (4)
- Spent Coffee Grounds Characterization and Reuse in Composting and Soil Amendment (2022) (4)
- Gas transport and mechanical properties of PDMS-TFS/LDPE nanocomposite membranes (2018) (4)
- Morphological, thermal and mechanical properties of polypropylene foams via rotational molding (2021) (4)
- Solid State Rheological Properties of Ultra‐High Molecular Weight Polyethylene Foams (2002) (4)
- Hollow Fiber Porous Nanocomposite Membranes Produced via Continuous Extrusion: Morphology and Gas Transport Properties (2018) (4)
- Co2-Selective Mixed Matrix Membranes of Bimetallic Zn/Co-Zif vs. Zif-8 and Zif-67 (2022) (4)
- Rheological Characterization of Thermoplastic Elastomers (Tpe) Based on Pp and Recycled Epdm (2016) (4)
- Reinforcement of Lignin-Based Phenol-Formaldehyde Adhesive with Nano-Crystalline Cellulose (NCC): Curing Behavior and Bonding Property of Plywood (2015) (4)
- Natural rubber biocomposites reinforced with cellulose nanocrystals/lignin hybrid fillers (2022) (4)
- ROTATIONAL MOLDING OF LINEAR LOW DENSITY POLYETHYLENE WITH DIFFERENT CONCENTRATIONS OF GROUND TIRE RUBBER (2017) (4)
- EFFECT OF CELLULOSE FIBER SURFACE TREATMENT TO REPLACE CARBON BLACK IN NATURAL RUBBER HYBRID COMPOSITES (2021) (4)
- Thermoplastic Elastomer based on Recycled HDPE/Ground Tire Rubber Interfacially Modified with an Elastomer: Effect of Mixing Sequence and Elastomer Type/Content (2022) (3)
- Techno-Economic Analysis of a Hybrid System for Flue-Gas Separation: Combining Membrane and Enzymatic-Absorption Processes (2020) (3)
- Polylactic Acid Composites and Composite Foams Based on Natural Fibers (2017) (3)
- Universal Strain‐Life Curve Exponents for Thermoplastics and Elastomers under Tension‐Tension and Torsion (2021) (3)
- Blending Recycled High-Density Polyethylene HDPE (rHDPE) with Virgin (vHDPE) as an Effective Approach to Improve the Mechanical Properties (2022) (3)
- Functionally Graded Biocomposites (2012) (3)
- The Generalized Power‐Law: A New Viscosity Model (2008) (3)
- The effect of surfactants on deformation of falling non‐Newtonian drops in a Newtonian liquid (2008) (3)
- Mechanical Properties and Thermal Conductivity of Epoxy Resin Reinforced with Functionalized Graphene Nanosheets and Woven Glass Fabric (2021) (3)
- Natural rubber nanocomposites: effect of carbon black/multi-walled carbon nanotubes hybrid fillers on the mechanical properties and thermal conductivity (2021) (3)
- Fourier transform fatigue analysis of the stress in tension/tension of HDPE and PA6 (2020) (3)
- Production and characterization of fully biobased foamed films based on gelatin (2020) (3)
- Determination of the optimum coupling agent content for composites based on hemp and high density polyethylene (2017) (3)
- Stiffness Behavior of Sisal Fiber Reinforced Foam Concrete under Flexural Loading (2020) (3)
- Effects of postextrusion conditions on the morphology of foamed high‐density polyethylene/polypropylene blends (2007) (3)
- Experimental and Finite Element Simulation of Polyolefin Elastomer Foams Using Real 3D Structures: Effect of Foaming Agent Content (2022) (3)
- Behavior of polyethylene composites based on hemp fibers treated by surface‐initiated catalytic polymerization (2021) (3)
- Dynamique de particules en milieu non-newtonien (1996) (3)
- Parameters estimation and fatigue life prediction of sisal fibre reinforced foam concrete (2022) (3)
- An Overview of Extrusion as a Pretreatment Method of Lignocellulosic Biomass (2022) (3)
- Blown Films and Ribbons Extrusion (2013) (3)
- Effect of Biaxial Stretching Temperature and Gas Diffusion Expansion on Cellular Morphology of PP/CaCO3 and PP/talc Cellular Films (2015) (3)
- Rapid Starch Acetylation at Low Temperature Using Iodine as Catalyst (2009) (3)
- Ground tire rubber/polyamide 6 thermoplastic elastomers produced by dry blending and compression molding (2021) (3)
- Estudio experimental y numérico de la morfología de mezclas PS/PEAD preparadas por extrusión (2006) (2)
- PREPARATION OF PA 6 / LLDPE BLENDS BY ROTATIONAL MOLDING (2017) (2)
- Compatibilized thermoplastic elastomers based on highly filled polyethylene with ground Tire rubber (2022) (2)
- A Review of Rubber Biocomposites Reinforced with Lignocellulosic Fillers (2022) (2)
- Effect of Weld Lines on Injection Moulded Fibreglass Reinforced Structural Foams. 2 - Impact and Flexural Properties (2010) (2)
- Conversion of low density polyethylene foams into auxetic metamaterials (2022) (2)
- Comparative Study of Polyethylene Composites Containing Industrial Lignins (2015) (2)
- Fourier Transform (FT) Analysis of the Stress as a Tool to Follow the Fatigue Behavior of Metals (2021) (2)
- Melting of alkane nanocrystals: towards a representation of polyethylene (2020) (2)
- Effect of SBR Rubber Particle Size Distribution on Its Thermo-Mechano-Chemical Regeneration (2013) (2)
- Auxetic Polymer Foams: Production, Modeling and Applications (2021) (2)
- Gas transport properties of cellular hollow fiber membranes based on LLDPE/LDPE blends (2020) (2)
- Dynamic rheology and mechanics of polymers in their solid state (2020) (2)
- Recycled HDPE/Natural Fiber Composites Modified with Waste Tire Rubber: A Comparison between Injection and Compression Molding (2022) (2)
- Properly Immersed Singly Periodic Minimal Cylinders in R 3 (2001) (2)
- Rheological and Molecular Investigations of Polyethylene Degradation in a Batch Mixer (2010) (2)
- Biosourced Poly(lactic acid)/polyamide-11 Blends: Effect of an Elastomer on the Morphology and Mechanical Properties (2022) (2)
- Production and characterization of films based on gelatin, agave microfibers and nanoclays (2021) (2)
- Effect of Processing on Ductility and Strength of Kevlar/Polyethylene Composites (2004) (2)
- Le cycle de Pâques au Québec et dans l'Ouest de la France (1983) (2)
- Polymer Processing: Extrusion (2017) (2)
- Effect of surface modification and fiber content on the mechanical performance of compression molded polyethylene‐maple composites (2021) (2)
- FIBER SURFACE TREATMENT AS AN APPROACH TO INCREASE FIBER CONTENT IN AGAVE-LMDPE COMPOSITES PRODUCED BY ROTOMOLDING (2016) (2)
- Auto-hybridization of Polyethylene/Maple Composites: The Effect of Fiber Size and Concentration (2017) (2)
- High‐performance thermal insulator based on polymer foam and silica xerogel (2021) (2)
- Permeability and thermal properties of PDMS/LDPE multilayer composite membranes (2018) (2)
- Multifunctional poly(vinylidene fluoride) and styrene butadiene rubber blend magneto-responsive nanocomposites based on hybrid graphene oxide and Fe3O4: synthesis, preparation and characterization (2021) (2)
- Effect of Weld Lines on Injection Moulded Fibreglass Reinforced Structural Foams. 1 - Morphology, Shear and Tensile Properties (2009) (1)
- Nonlinear mechanical behavior of elastomers under tension/tension fatigue deformation as determined by Fourier transform (2021) (1)
- Low density polyethylene composites based on flax fibers modified by a combination of coupling agent (2022) (1)
- Surface modification of MWCNT to improve the mechanical and Thermal properties of natural rubber nanocomposites (2022) (1)
- Piezoelectric polymer films: synthesis, applications, and modeling (2020) (1)
- Synergistic effect between graphene nanoplatelets and carbon black to improve the thermal and mechanical properties of natural rubber nanocomposites (2022) (1)
- Poly (Lactic Acid) (PLA)/Recycled Styrene Butadiene Rubber (rSBR) Composites (2022) (1)
- Density graded polymer composite foams (2022) (1)
- Processing and properties of foamed HDPE/PP blends prepared by extrusion (2004) (1)
- Waste Paper as a Valuable Resource: An Overview of Recent Trends in the Polymeric Composites Field (2023) (1)
- A Low-Cost Porous Polymer Membrane for Gas Permeation (2022) (1)
- Crystallinity and impact strength improvement of wood-polylactic acid biocomposites produced by rotational and compression molding (2021) (1)
- ROTATIONAL MOLDING OF POLYLACTIC ACID AND AGAVE FIBER BIOCOMPOSITES (2017) (1)
- Two-step surface functionalization/alignment strategy to improve CO2/N2 separation from mixed matrix membranes based on PEBAX and graphene oxide (2022) (1)
- Reprocessing of the composites based on the poly(lactic acid) loaded with olive husk flour (2018) (1)
- Les travaux domestiques reliés au cycle liturgique de Pâques (1979) (1)
- Témoignage personnel de l’expérience d’une religieuse (2013) (1)
- Preparation and Characterization of Reduced Graphene Oxide Based Natural Rubber Nanocomposites (2020) (1)
- The mechanical properties of density graded hemp/polyethylene composites (2015) (1)
- Thermally stable cellular poly(vinylidene) ferroelectrets: Optimization of CO 2 driven inflation process (2019) (1)
- Production and Characterization of Gelatin Biomaterials Based on Agave Microfibers and Bentonite as Reinforcements (2022) (1)
- Mechanical fatigue of recycled and virgin high‐/low‐density polyethylene (2022) (1)
- Electrospinning of Softwood Organosolv Lignin without Polymer Addition (2022) (1)
- Blown film stability for low, medium, and high molecular weight polylactic acid and their tensile properties (2023) (0)
- Do Small Bubbles Follow Stokes Law (2002) (0)
- IMPACT MODIFICATION OF WASTE PLASTIC / WOOD FLOUR COMPOSITES VIA STRUCTURAL MODIFICATION (2013) (0)
- Strengthening Composites with Waste Rubber: Coated rubber particles plus process optimization equals impact-modified polymer composites (2014) (0)
- Prof. Pierre J. Carreau 65th Birthday Symposium (2005) (0)
- The Effect of Physical Aging on the Mechanical Properties of Raw, Treated and Compatibilized Coir Fibers-Based Polyisoprene Bio-Composites (2020) (0)
- CRYSTALLINITY AND IMPACT STRENGTH IMPROVEMENT OF WOOD- (2021) (0)
- Polymer based membranes for propylene/propane separation: CMS, MOF and polymer electrolyte membranes (2022) (0)
- Effect of Biobased SiO2 on the Morphological, Thermal, Mechanical, Rheological, and Permeability Properties of PLLA/PEG/SiO2 Biocomposites (2023) (0)
- Improvement Of Fatigue Prediction For Better Material Design (2018) (0)
- Place de l’imagerie dans l’exploration des hyperandrogenismes prepubertaires (2006) (0)
- Torsion Properties of Cylindrical Polymer Foams (2004) (0)
- Processing and properties of thermoplastics elastomers based on recycled polyethylene and EPDM (2016) (0)
- Extrusion of foamed wood-plastic composites. Part I: physical and morphological characterization. (2017) (0)
- A Simple Method to Convert Cellular Polymers into Auxetic Metamaterials (2023) (0)
- Thermal Conductivity Of Advanced Architected Cellular Materials (2018) (0)
- Recycling of used tires: Processing and characterization of complex materials (2018) (0)
- Hybrid nanocomposites based on cellulose nanocrystals/nanofibrils and carbon nanotubes: From preparation to applications (2021) (0)
- Postsynthetic Modification of Zn/Co-ZIF by 3,5-Diamino-1,2,4-triazole for Improved MOF/Polyimide Interface in CO2–Selective Mixed Matrix Membranes (2022) (0)
- Experimental and numerical study of the post-extrusion conditions in ribbon extrusion process (2004) (0)
- List of contributors (2020) (0)
- Fabrication and characterization of heat-set composite gels obtained from complexation of electro-activated whey/canola proteins mixture (2023) (0)
- ESTUDIO EXPERIMENTAL Y NUMÉRICO DE LA MORFOLOGÍA DE MEZCLAS PS/PEAD PREPARADAS POR EXTRUSIÓN EXPERIMENTAL AND NUMERICAL STUDY OF THE MORPHOLOGY OF PS/HDPE BLENDS PREPARED BY EXTRUSION (2006) (0)
- Hydrodynamics of Free-Rise Bubbles in Non-Newtonian Polymer Solutions (2020) (0)
- Investigating the role of the “mechanical” deformation of Azobenzene molecules for biological control (2021) (0)
- Injection Molding of Wood-Plastics Composites using Powder Technology (2014) (0)
- Production and Characterization of High Density Polyethylene Reinforced by Eucalyptus Capsule Fibers (2018) (0)
- Morphological, Mechanical and Thermal Properties of Rubber Foams: A Review Based on Recent Investigations (2023) (0)
- Physical aging of PC : PS blends: Dynamic mechanical analysis and nuclear magnetic resonance studies (2022) (0)
- Wood particleboards produced with unmodified and esterified Kraft lignins (2015) (0)
- Development of piezoelectric properties in PVDF: Effect of particle concentration and stretching variables (2017) (0)
- Evolution of the electrical resistivity at rest and during oscillatory shearing of co‐continuous morphology ( PP / PMMA )/ MWCNT systems (2021) (0)
- Mechanical Analysis Of Multi-Directional Functionally Graded Cellular Plates (2018) (0)
- Elastic modulus prediction for hybrid polymer composites (2019) (0)
- Proceedings of the ninth annual general meeting of BIOMINET (1993) (0)
- Mechanical recycling of PLA : Effect of weathering, extrusion cycles, and chain extender (2023) (0)
- Photodynamic control of bacterial motility by means of azobenzene molecules (2021) (0)
- Investigation of the Gibbs-Thomson law under high pressure using all-atom simulation (2021) (0)
- Polyurethane Foams Reinforced with Biobased Materials: Properties and Applications (2019) (0)
- Effect of Temperature on the Viscoelastic Properties of Carbon Nanotube Reinforced Polypropylene Composites (2021) (0)
- Meet Our Co-Editor (2018) (0)
- Sustainable Reuse of Waste Tire Textile Fibers (WTTF) as Reinforcements (2022) (0)
- List of Contributors (2019) (0)
- Impact of pre-extraction on xylose recovery from two lignocellulosic agro-wastes (2022) (0)
- A Comparison between Sabra and Alfa Fibers in Rubber Biocomposites (2019) (0)
- Tensile properties of anisotropic foamed polyethylene films with ellipsoidal closed cells (2021) (0)
- Epithélioma des glandes de Meibomius: rapport d'une observation avec étude ultrastructurale (1976) (0)
- Immunité antirougeoleuse et incidence de la maladie dans une population d'enfants parisiens. (1992) (0)
- Traitement solvothermique superficiel de la biomasse lignocellulosique dans les liquides ioniques–hygroscopicité, morphologie et propriétés mécaniques (2015) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Denis Rodrigue?
Denis Rodrigue is affiliated with the following schools:
