Enrico Traversa
#121,968
Most Influential Person Now
Researcher
Enrico Traversa's AcademicInfluence.com Rankings
Enrico Traversachemistry Degrees
Chemistry
#2649
World Rank
#3582
Historical Rank
Nanotechnology
#82
World Rank
#82
Historical Rank
Physical Chemistry
#308
World Rank
#354
Historical Rank

Enrico Traversaengineering Degrees
Engineering
#3876
World Rank
#5013
Historical Rank
Materials Science
#164
World Rank
#166
Historical Rank
Applied Physics
#818
World Rank
#840
Historical Rank

Download Badge
Chemistry Engineering
Enrico Traversa's Degrees
- PhD Materials Science University of Milan
- Masters Chemistry University of Turin
- Bachelors Chemistry University of Turin
Why Is Enrico Traversa Influential?
(Suggest an Edit or Addition)Enrico Traversa's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy (2002) (1301)
- Pharmacological potential of cerium oxide nanoparticles. (2011) (771)
- Ceramic sensors for humidity detection: the state-of-the-art and future developments (1995) (755)
- Copper Nanoparticle/Polymer Composites with Antifungal and Bacteriostatic Properties (2005) (730)
- Materials challenges toward proton-conducting oxide fuel cells: a critical review. (2010) (642)
- High proton conduction in grain-boundary-free yttrium-doped barium zirconate films grown by pulsed laser deposition. (2010) (428)
- Towards the Next Generation of Solid Oxide Fuel Cells Operating Below 600 °C with Chemically Stable Proton‐Conducting Electrolytes (2012) (420)
- Tailoring the chemical stability of Ba(Ce0.8−xZrx)Y0.2O3−δ protonic conductors for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) (2008) (409)
- Fuel cells, an alternative to standard sources of energy (2002) (315)
- Engineering materials and biology to boost performance of microbial fuel cells: a critical review (2008) (308)
- Cerium oxide nanoparticles protect cardiac progenitor cells from oxidative stress. (2012) (298)
- Ce³+ ions determine redox-dependent anti-apoptotic effect of cerium oxide nanoparticles. (2011) (285)
- Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides. (2014) (280)
- Catalytic Properties and Biomedical Applications of Cerium Oxide Nanoparticles. (2015) (250)
- Controlling the porosity of fibrous scaffolds by modulating the fiber diameter and packing density. (2011) (247)
- Screen-printed perovskite-type thick films as gas sensors for environmental monitoring (1999) (223)
- Design of Electroceramics for Solid Oxides Fuel Cell Applications: Playing with Ceria (2008) (215)
- Nafion–TiO2 composite DMFC membranes: physico-chemical properties of the filler versus electrochemical performance (2005) (208)
- Water adsorption on the stoichiometric and reduced CeO2(111) surface: a first-principles investigation. (2009) (207)
- Multiscale three-dimensional scaffolds for soft tissue engineering via multimodal electrospinning. (2010) (201)
- Chemically Stable Pr and Y Co‐Doped Barium Zirconate Electrolytes with High Proton Conductivity for Intermediate‐Temperature Solid Oxide Fuel Cells (2011) (193)
- Nafion–TiO2 hybrid membranes for medium temperature polymer electrolyte fuel cells (PEFCs) (2005) (191)
- Stem Cell Aligned Growth Induced by CeO2 Nanoparticles in PLGA Scaffolds with Improved Bioactivity for Regenerative Medicine (2010) (166)
- Antifungal activity of polymer-based copper nanocomposite coatings (2004) (158)
- Does the increase in Y-dopant concentration improve the proton conductivity of BaZr1−xYxO3−δ fuel cell electrolytes? (2010) (152)
- Ceramic thin films by sol-gel processing as novel materials for integrated humidity sensors (1996) (150)
- Crystallographic characterization and NO2 gas sensing property of LnFeO3 prepared by thermal decomposition of LnFe hexacyanocomplexes, Ln[Fe(CN)6]·nH2O, Ln = La, Nd, Sm, Gd, and Dy (2003) (150)
- Tailoring the Cathode-Electrolyte Interface with Nanoparticles for Boosting the Solid Oxide Fuel Cell Performance of Chemically Stable Proton-Conducting Electrolytes. (2018) (144)
- Stability and morphology of cerium oxide surfaces in an oxidizing environment: A first-principles investigation (2009) (143)
- Ionic conductivity in oxide heterostructures: the role of interfaces (2010) (137)
- Photovoltaic properties of Bi2FeCrO6 epitaxial thin films (2011) (135)
- NO2 sensitive LaFeO3 thin films prepared by r.f. sputtering (1995) (130)
- High-performance composite cathodes with tailored mixed conductivity for intermediate temperature solid oxide fuel cells using proton conducting electrolytes (2011) (128)
- Room-temperature giant persistent photoconductivity in SrTiO₃/LaAlO₃ heterostructures. (2012) (124)
- Electrode materials: a challenge for the exploitation of protonic solid oxide fuel cells (2010) (122)
- Microstructure and Electrical Properties of MgAl2O4 Thin Films for Humidity Sensing (1993) (121)
- Hippo pathway effectors control cardiac progenitor cell fate by acting as dynamic sensors of substrate mechanics and nanostructure. (2014) (121)
- Sol-Gel Processed TiO2-Based Nano-Sized Powders for Use in Thick-Film Gas Sensors for Atmospheric Pollutant Monitoring (2001) (116)
- Cerium oxide nanoparticles, combining antioxidant and UV shielding properties, prevent UV-induced cell damage and mutagenesis. (2015) (115)
- Criticality of the Biological and Physical Stimuli Array Inducing Resident Cardiac Stem Cell Determination (2008) (115)
- SPEEK-TiO2 nanocomposite hybrid proton conductive membranes via in situ mixed sol–gel process (2007) (112)
- Composite Cathodes for Proton Conducting Electrolytes (2009) (110)
- High-performance bilayered electrolyte intermediate temperature solid oxide fuel cells (2009) (110)
- Lowering grain boundary resistance of BaZr(0.8)Y(0.2)O(3-δ) with LiNO3 sintering-aid improves proton conductivity for fuel cell operation. (2011) (108)
- The NO2 response of solid electrolyte sensors made using nano-sized LaFeO3 electrodes (2001) (108)
- Sinteractive anodic powders improve densification and electrochemical properties of BaZr0.8Y0.2O3−δ electrolyte films for anode-supported solid oxide fuel cells (2011) (108)
- Cerium oxide nanoparticles: a promise for applications in therapy. (2011) (107)
- The effect of cerium valence states at cerium oxide nanoparticle surfaces on cell proliferation. (2014) (101)
- Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance (2010) (99)
- Design and fabrication of a chemically-stable proton conductor bilayer electrolyte for intermediate temperature solid oxide fuel cells (IT-SOFCs) (2008) (98)
- Substrate stiffness modulates gene expression and phenotype in neonatal cardiomyocytes in vitro. (2012) (96)
- Gas-sensitive electrical properties of perovskite-type SmFeO3 thick films (1998) (94)
- Synthesis strategies for improving the performance of doped-BaZrO 3 materials in solid oxide fuel cell applications (2014) (92)
- Fabrication and Electrochemical Properties of Epitaxial Samarium‐Doped Ceria Films on SrTiO3‐Buffered MgO Substrates (2009) (92)
- Enhancement of ionic conductivity in Sm-doped ceria/yttria-stabilized zirconia heteroepitaxial structures. (2010) (91)
- Design of BaZr0.8Y0.2O3–δ Protonic Conductor to Improve the Electrochemical Performance in Intermediate Temperature Solid Oxide Fuel Cells (IT‐SOFCs) (2008) (88)
- Effect of anode functional layer on the performance of proton-conducting solid oxide fuel cells (SOFCs) (2012) (87)
- Effect of synthetic route on sintering behaviour, phase purity and conductivity of Sr- and Mg-doped LaGaO3 perovskites (2004) (86)
- A Simple New Route to Covalent Organic/Inorganic Hybrid Proton Exchange Polymeric Membranes (2006) (85)
- Fabrication of bioactive glass-ceramic foams mimicking human bone portions for regenerative medicine. (2008) (84)
- MgAl2O4 spinel powders from oxide one pot synthesis (OOPS) process for ceramic humidity sensors (2000) (83)
- Tensile lattice distortion does not affect oxygen transport in yttria-stabilized zirconia-CeO2 heterointerfaces. (2012) (83)
- Sol-gel processed TiO2-based thin films as innovative humidity sensors (1995) (82)
- A novel synthetic approach of cerium oxide nanoparticles with improved biomedical activity (2017) (81)
- The development of gas sensor for carbon monoxide monitoring using nanostructure of Nb–TiO2 (2005) (81)
- Thick-Film Gas Sensors Based on Nano-Sized Semiconducting Oxide Powders (1999) (80)
- Electrochemical NOx Sensors Based on Interfacing Nanosized LaFeO3 Perovskite-Type Oxide and Ionic Conductors (2001) (80)
- Effect of Dopant–Host Ionic Radii Mismatch on Acceptor-Doped Barium Zirconate Microstructure and Proton Conductivity (2017) (79)
- Planar electrochemical sensors based on tape-cast YSZ layers and oxide electrodes (2004) (79)
- Sensing Mechanism of Potentiometric Gas Sensors Based on Stabilized Zirconia with Oxide Electrodes Is It Always Mixed Potential (2004) (78)
- Electrochemical Properties and Intermediate-Temperature Fuel Cell Performance of Dense Yttrium-Doped Barium Zirconate with Calcium Addition (2012) (77)
- Low temperature ethanol steam reforming in a Pd-Ag membrane reactor (2008) (76)
- Humidity sensors based on mesoporous silica thin films synthesised by block copolymers (2004) (76)
- Titania Nanosheets (TNS)/Sulfonated Poly Ether Ether Ketone (SPEEK) Nanocomposite Proton Exchange Membranes for Fuel Cells† (2010) (76)
- Preparation and characterization of nanosized titania sensing film (2001) (75)
- A novel ionic diffusion strategy to fabricate high-performance anode-supported solid oxide fuel cells (SOFCs) with proton-conducting Y-doped BaZrO3 films (2011) (75)
- Y-doped BaZrO3 as a chemically stable electrolyte for proton-conducting solid oxide electrolysis cells (SOECs) (2015) (72)
- Composite Mesoporous Titania Nafion-Based Membranes for Direct Methanol Fuel Cell Operation at High Temperature (2005) (72)
- Tailoring cations in a perovskite cathode for proton-conducting solid oxide fuel cells with high performance (2019) (72)
- Stability of the Ce3+ valence state in cerium oxide nanoparticle layers. (2012) (71)
- Design of ceramic materials for chemical sensors : Effect of SmFeO3 processing on surface and electrical properties (2004) (69)
- Microstructural evolution of nanosized LaFeO3 powders from the thermal decomposition of a cyano-complex for thick film gas sensors (1997) (68)
- Sulfonated polyether ether ketone and hydrated tin oxide proton conducting composites for direct methanol fuel cell applications (2008) (67)
- Nanostructured thick-film gas sensors for atmospheric pollutant monitoring: quantitative analysis on field tests (2001) (67)
- Electrical and structural characterisation of mesoporous silica thin films as humidity sensors (2001) (67)
- High performance anode-supported intermediate temperature solid oxide fuel cells (IT-SOFCs) with La0.8Sr0.2Ga0.8Mg0.2O3−δ electrolyte films prepared by electrophoretic deposition (2009) (66)
- A covalent organic/inorganic hybrid proton exchange polymeric membrane: synthesis and characterization (2005) (66)
- Tailoring mixed proton-electronic conductivity of BaZrO3 by Y and Pr co-doping for cathode application in protonic SOFCs (2011) (65)
- Sinteractivity, proton conductivity and chemical stability of BaZr0.7In0.3O3-δ for solid oxide fuel cells (SOFCs) (2011) (65)
- Thermal evolution of nanosized LaFeO3 powders from a heteronuclear complex, La[Fe(CN)6]·nH2O (1998) (64)
- Array of thick film sensors for atmospheric pollutant monitoring (2000) (63)
- Scalable Oxygen‐Ion Transport Kinetics in Metal‐Oxide Films: Impact of Thermally Induced Lattice Compaction in Acceptor Doped Ceria Films (2014) (63)
- Study of YSZ-Based Electrochemical Sensors with WO 3 Electrodes in NO 2 and CO Environments (2003) (62)
- A novel humidity-detection mechanism for ZnO dense pellets (1995) (62)
- Thermal evolution of the microstructure of nanosized LaFeO3 powders from the thermal decomposition of a heteronuclear complex, La[Fe(CN)6] · 5H2O (1998) (62)
- Environmental monitoring field tests using screen-printed thick-film sensors based on semiconducting oxides (2000) (62)
- Nano-structured perovskite oxide electrodes for planar electrochemical sensors using tape casted YSZ layers (2004) (60)
- Mesoporous silica thin films for alcohol sensors (2001) (59)
- Increasing the operation temperature of polymer electrolyte membranes for fuel cells: From nanocomposites to hybrids (2006) (58)
- Solid oxide fuel cells with proton-conducting La 0.99 Ca 0.01 NbO 4 electrolyte (2018) (58)
- SPEEK/PPSU-based organic–inorganic membranes: proton conducting electrolytes in anhydrous and wet environments (2006) (58)
- Rough fibrils provide a toughening mechanism in biological fibers. (2012) (56)
- Cerium oxide nanoparticles inhibit differentiation of neural stem cells (2017) (56)
- Design of ceramic materials for chemical sensors with novel properties (1995) (55)
- Improved total conductivity of nanometric samaria-doped ceria powders sintered with molten LiNO3 additive (2009) (55)
- Dry turning of alumina/aluminum composites with CVD diamond coated Co-cemented tungsten carbide tools (2003) (55)
- Sol–gel synthesis, X-ray photoelectron spectroscopy and electrical conductivity of Co-doped (La, Sr)(Ga, Mg)O3−δ perovskites (2007) (55)
- Not Only Redox: The Multifaceted Activity of Cerium Oxide Nanoparticles in Cancer Prevention and Therapy (2018) (54)
- Nafion-based composite electrolytes for proton exchange membrane fuel cells operating above 120 °C with titania nanoparticles and nanotubes as fillers (2011) (54)
- Design of Ceramic Materials for Chemical Sensors: SmFeO3 Thick Films Sensitive to NO2 (1999) (53)
- BaZr0.8Y0.2O3− δ -NiO Composite Anodic Powders for Proton-Conducting SOFCs Prepared by a Combustion Method (2011) (53)
- Mixed Protonic/Electronic Conductor Cathodes for Intermediate Temperature SOFCs Based on Proton Conducting Electrolytes (2009) (51)
- Effect of substrate grain size and surface treatments on the cutting properties of diamond coated Co-cemented tungsten carbide tools (2002) (51)
- Sol-Gel Preparation and Characterization of Ag-TiO2 Nanocomposite Thin Films (2000) (51)
- Humidity-sensitive properties of titania films prepared using the sol-gel process (1993) (50)
- Human Cardiac Progenitor Cell Grafts as Unrestricted Source of Supernumerary Cardiac Cells in Healthy Murine Hearts (2011) (50)
- Non-Nernstian planar sensors based on YSZ with a Nb2O5 electrode (2008) (49)
- Solid state ceramic gas sensors based on interfacing ionic conductors with semiconducting oxides (2000) (49)
- Study of different nanostructured carbon supports for fuel cell catalysts (2009) (49)
- Mechanism of LaFeO3 Perovskite-Type Oxide Formation from the Thermal Decomposition of d-f Heteronuclear Complex La[Fe(CN)6]-5H2O (1996) (49)
- Nanostructuring the electronic conducting La0.8Sr0.2MnO3−δ cathode for high-performance in proton-conducting solid oxide fuel cells below 600°C (2017) (49)
- Study of the conduction mechanism of La2CuO4—ZnO heterocontacts at different relative humidities (1995) (49)
- An Upgraded Lithium Ion Battery Based on a Polymeric Separator Incorporated with Anode Active Materials (2019) (47)
- Electrical properties of YSZ/NiO composites prepared by a liquid mixture technique (2005) (47)
- The mechanism of MgAl2O4 spinel formation from the thermal decomposition of coprecipitated hydroxides (1991) (47)
- Thermal stability and thermodynamic properties of hybrid proton-conducting polyaryl etherketones. (2006) (46)
- A wet-chemical route for the preparation of Ni-BaCe0.9Y0.1O3 δ cermet anodes for IT-SOFCs (2009) (46)
- An EIS study of the humidity-sensitive electrical conduction of alkali-doped TiO2 films (1996) (46)
- Solid-State Ionic Devices (2007) (46)
- Magnesium aluminium spinel thin film as a humidity sensor (1992) (46)
- Cooperation of Biological and Mechanical Signals in Cardiac Progenitor Cell Differentiation (2011) (45)
- Substrate stiffness affects skeletal myoblast differentiation in vitro (2012) (44)
- Effect of different carbon nanotubes on cell viability and proliferation (2007) (44)
- Sulfonated polyether ether ketone-based composite membranes doped with a tungsten-based inorganic proton conductor for fuel cell applications (2006) (43)
- Cutting performance and indentation behaviour of diamond films on co-cemented tungsten carbide (2000) (42)
- Electrolyte materials for solid oxide fuel cells derived from metal complexes: Gadolinia-doped ceria (2012) (41)
- Preparation and characterization of perovskite-type Ln′xLn″1–xCoO3 for electroceramic applications (1996) (41)
- Sol-Gel Nanosized Semiconducting Titania-Based Powders for Thick-Film Gas Sensors (2000) (40)
- Low-temperature ethanol steam reforming in a Pd–Ag membrane reactor: Part 2. Pt-based and Ni-based catalysts and general comparison (2008) (40)
- Relative humidity and alcohol sensors based on mesoporous silica thin films synthesised from block copolymers (2003) (40)
- Synthesis and Structural Characterization of Trimetallic Perovskite‐Type Rare‐Earth Orthoferrites, LaxSm1–xFeO3 (2004) (39)
- Enhanced performance of symmetrical solid oxide fuel cells using a doped ceria buffer layer (2016) (39)
- Reversible solid oxide fuel cells (R-SOFCs) with chemically stable proton-conducting oxides (2015) (39)
- Biofabrication of Hepatic Constructs by 3D Bioprinting of a Cell‐Laden Thermogel: An Effective Tool to Assess Drug‐Induced Hepatotoxic Response (2020) (39)
- Synthesis of nanocrystalline nickel oxide by controlled oxidation of nickel nanoparticles and their humidity sensing properties (2000) (39)
- Quantitative determination of the adhesive fracture toughness of CVD diamond to WC–Co cemented carbide (2000) (36)
- Gas sensitivity of ZnO/La2CuO4 heterocontacts (1994) (36)
- Strontium and iron-doped barium cobaltite prepared by solution combustion synthesis: exploring a mixed-fuel approach for tailored intermediate temperature solid oxide fuel cell cathode materials (2013) (36)
- Preparation and structural characterization of perovskite-type LaxLn1−x″CoO3 by the thermal decomposition of heteronuclear complexes, LaxLn1−x″| Co(CN)6| · nH2O (Ln″ Sm and Ho) (1996) (36)
- Electrophoretic deposition of dense BaCe0.9Y0.1O3−x electrolyte thick-films on Ni-based anodes for intermediate temperature solid oxide fuel cells (2009) (36)
- Preparation of Sol-Gel Nano-Composites Containing Copper Oxide and Their Gas Sensing Properties (2003) (35)
- High temperature detection of CO/HCs gases by non-Nernstian planar sensors using Nb2O5 electrode (2008) (35)
- Microstructure and electrical properties of MgAl2O4 and MgFe2O4 spinel porous compacts for use in humidity sensors (1993) (35)
- Spider silk as a load bearing biomaterial: tailoring mechanical properties via structural modifications. (2011) (35)
- Sol-Gel Synthesis of -Al 2 TiO 5 Thin Films at Low Temperature (2000) (34)
- The critical role of water in spider silk and its consequence for protein mechanics. (2011) (34)
- Humidity-sensitive electrical properties of MgAl2O4 thin films (1993) (34)
- The effect of humidity on the voltage-current characteristic of SnO2 based ceramic varistor (2004) (34)
- Development of High Performance Ceria/Bismuth Oxide Bilayered Electrolyte SOFCs for Lower Temperature Operation (2010) (34)
- SPPSU-based hybrid proton conducting polymeric electrolytes for intermediate temperature PEMFCs (2007) (33)
- Humidity sensitivity of sputtered TiO2 thin films (1994) (33)
- Intelligent Ceramic Materials for Chemical Sensors (1995) (32)
- XPS analysis of sol‐gel processed doped and undoped TiO2 films for sensors (1994) (32)
- Elastic properties of hard cobalt boride composite nanoparticles (2010) (32)
- Electrical properties of sol–gel processed NASICON having new compositions (2000) (32)
- XPS analysis of the interface of ceramic thin films for humidity sensors (1993) (32)
- Development of Nafion/Tin Oxide Composite MEA for DMFC Applications (2010) (31)
- Photoelectrochemical Properties of Sol-Gel Processed Ag-TiO2 Nanocomposite Thin Films (2001) (31)
- Thick soft tissue reconstruction on highly perfusive biodegradable scaffolds. (2010) (31)
- Zirconia‐Based Electrochemical NOx Sensors with Semiconducting Oxide Electrodes (2005) (30)
- Synthesis and Structural Characterization of Trimetallic Perovskite-Type Oxides, LaFexCo1−xO3, by the Thermal Decomposition of Cyano Complexes, La[FexCo1−x(CN6)]·nH2O (1998) (30)
- A CHEMICAL ROUTE FOR THE PREPARATION OF NANOSIZED RARE EARTH PEROVSKITE-TYPE OXIDES FOR ELECTROCERAMIC APPLICATIONS (1998) (30)
- Nucleation and Growth of Diamond Films on Ni‐Cemented Tungsten Carbide: Effects of Substrate Pretreatments (1994) (30)
- Study of the conduction mechanism of MgAl2O4 at different environmental humidities (1993) (30)
- Krytox-Silica-Nafion® composite membrane: A hybrid system for maintaining proton conductivity in a wide range of operating temperatures (2006) (30)
- Carbon nanotubes on Jurkat cells: effects on cell viability and plasma membrane potential (2008) (29)
- Electrode tailoring improves the intermediate temperature performance of solid oxide fuel cells based on a Y and Pr co-doped barium zirconate proton conducting electrolyte (2011) (29)
- Structural and Electrical Properties of Sol–Gel‐processed CdTiO3 Powders and Films (1997) (29)
- Chemical vapor deposition of multi-walled carbon nanotubes from nickel/yttria-stabilized zirconia catalysts (2006) (29)
- Novel Ba0.5Sr0.5(Co0.8Fe0.2)1 − xTixO3 − δ (x = 0, 0.05, and 0.1) cathode materials for proton-conducting solid oxide fuel cells (2012) (28)
- Investigation of La2CuO4 ∕ YSZ ∕ Pt Potentiometric NO x Sensors with Electrochemical Impedance Spectroscopy (2008) (28)
- Master sintering curve for Gd-doped CeO2 solid electrolytes (2009) (28)
- Effect of surface modification on NO2 sensing properties of SnO2 varistor-type sensors (1999) (28)
- Metallic-lithium, LiFePO4-based polymer battery using PEO—ZrO2 nanocomposite polymer electrolyte (2004) (28)
- Preparation of Perovskite-Type Oxides by the Thermal Decomposition of Heteronuclear Complexes, Ln[FexCo1-x(CN)6]⋅4H2O (Ln=Pr-Yb) (1997) (27)
- Cathode Performance of Nanostructured La1 − a Sr a Co1 − b Fe b O3 − x on a Ce0.8Sm0.2O2 Electrolyte Prepared by Citrate-Nitrate Autocombustion (2007) (27)
- Tuning hierarchical architecture of 3D polymeric scaffolds for cardiac tissue engineering (2008) (27)
- Detection of sub-ppm level of VOCs based on a Pt/YSZ/Pt potentiometric oxygen sensor with reference air (2009) (27)
- Preparation and characterization of M/TiO2 (M = Ag, Au, Pt) nanocomposite thin films (2001) (27)
- Humidity-sensitive electrical response of sintered MgFe2O4 (1993) (26)
- A chemically stable electrolyte with a novel sandwiched structure for proton-conducting solid oxide fuel cells (SOFCs) (2013) (26)
- Thick-film gas sensors based on vanadium–titanium oxide powders prepared by sol-gel synthesis (2004) (25)
- Preparation and Electrochemical Characterization of Perovskite/YSZ Ceramic Films (2005) (25)
- Sensoristic Applications of Self-assembled Mesostructured Silica Films (2003) (25)
- Proton conducting membranes composed of sulfonated poly(etheretherketone) and zirconium phosphate nanosheets for fuel cell applications (2010) (25)
- Thick films of MgFe2O4 for humidity sensors (1996) (25)
- Thermal, electrochemical and structural properties of stabilized LiNiyCo1−y−zMzO2 lithium-ion cathode material prepared by a chemical route (2001) (25)
- Y and Ni Co-Doped BaZrO3 as a Proton-Conducting Solid Oxide Fuel Cell Electrolyte Exhibiting Superior Power Performance (2015) (24)
- An X-ray study of the trimetallic LaxSm1−xFeO3 orthoferrites (2001) (24)
- Mixed Ionic–Electronic YSZ/Ni Composite for SOFC Anodes with High Electrical Conductivity (2006) (23)
- Electrospun zirconia nanofibers for enhancing the electrochemical synthesis of ammonia by artificial nitrogen fixation (2021) (23)
- Preparation of Nanosized Perovskite‐Type LaMnO3 Powders Using the Thermal Decomposition of a Heteronuclear Complex, LaMn(dhbaen)(OH)(NO3)(H2O)4 (2001) (23)
- Vanadium and tantalum-doped titanium oxide (TiTaV): A novel material for gas sensing (2005) (23)
- Nucleation and adhesion of diamond films on Co cemented tungsten carbide (1999) (23)
- Anode Supported Protonic Solid Oxide Fuel Cells Fabricated Using Electrophoretic Deposition (2011) (22)
- Planar non-nernstian electrochemical sensors: field test in the exhaust of a spark ignition engine (2005) (22)
- PEO based polymer electrolyte lithium-ion battery (2004) (21)
- Novel Y2−xPrxRu2O7 (x=0–2) Pyrochlore Oxides Prepared Using a Soft Chemistry Route and their Electrical Properties (2010) (21)
- Foaming of filled polyurethanes for fabrication of porous anode supports for intermediate temperature-solid oxide fuel cells (2006) (20)
- Composite Ormosil/Nafion Membranes as Electrolytes for Direct Methanol Fuel Cells (2007) (20)
- Applicability of Bi2Ru2O7 Pyrochlore Electrodes for ESB and BIMEVOX Electrolytes (2006) (20)
- Radial Inner Morphology Effects on the Mechanical Properties of Amorphous Composite Cobalt Boride Nanoparticles (2010) (20)
- Electrophoretic Deposition of Dense Sr‐ and Mg‐Doped LaGaO3 Electrolyte Films on Porous La‐Doped Ceria for Intermediate Temperature Solid Oxide Fuel Cells (2008) (20)
- A primer of statistical methods for correlating parameters and properties of electrospun poly(L-lactide) scaffolds for tissue engineering--PART 1: design of experiments. (2015) (19)
- X-ray photoelectron spectroscopy investigation of MgAl 2 O 4 thin films for humidity sensors (1994) (19)
- Nanomechanics for MEMS: a structural design perspective. (2011) (19)
- Tailoring cobalt‐free La0.5Sr0.5FeO3‐δ cathode with a nonmetal cation‐doping strategy for high‐performance proton‐conducting solid oxide fuel cells (2022) (19)
- Effect of Mg2+ Doping on the Structural, Thermal, and Electrochemical Properties of LiNi0.8Co0.16Mg0.04O2 (2004) (19)
- Interface Effects on the Ionic Conductivity of Doped Ceria-Yttria-Stabilized Zirconia Heterostructures. (2018) (19)
- Effect of WC grain growth inhibitors on the adhesion of chemical vapor deposition diamond films on WC–Co cemented carbide (2002) (19)
- Effect of a Proton Conducting Filler on the Physico‐Chemical Properties of SPEEK‐Based Membranes (2009) (19)
- Synthesis of NASICON with New Compositions for Electrochemical Carbon Dioxide Sensors* (2000) (18)
- Ab initio investigation of defect formation at ZrO 2 -CeO 2 interfaces (2012) (18)
- Pb2Ru2O6.5 as a Low-Temperature Cathode for Bismuth Oxide Electrolytes (2005) (18)
- Effect of WC-Co substrates pre-treatment and microstructure on the adhesive toughness of CVD diamond (2001) (18)
- Preparation of Perovskite-type LaFexCo1−xO3 by thermal decomposition of heteronuclear complex, La[FexCo1−x(CN)6]·nH2O for electroceramic applications (1997) (18)
- Synthesis and Characterization of BaTiO3‐Based Foams with a Controlled Microstructure (2009) (18)
- Sol–gel synthesis and characterization of Co-doped LSGM perovskites (2005) (18)
- Toward the Miniaturization of Solid Oxide Fuel Cells (2009) (18)
- Growth mechanisms of ceria- and zirconia-based epitaxial thin films and hetero-structures grown by pulsed laser deposition (2013) (17)
- Structural Properties and Electrochemical Characteristics of Ba0.5Sr0.5Co1 − x Fe x O3 − δ Phases in Different Atmospheres (2009) (17)
- Early Stages of Diamond‐Film Formation on Cobalt‐Cemented Tungsten Carbide (2004) (17)
- Preparation and Characterization of Heteronuclear Hexacyano Complexes, LnxSm1−x[Co(CN)6]·nH2O (Ln = La, Er, and Yb) (1996) (17)
- Steam Electrolysis by Solid Oxide Electrolysis Cells (SOECs) with Proton‐Conducting Oxides (2015) (17)
- Investigation of nozzle shape effect on Sm0.1Ce0.9O1.95 thin film prepared by electrostatic spray deposition (2008) (17)
- Electrochemical NO2 Sensors with WO3 Electrodes for High Temperature Applications (2002) (16)
- Probing the bulk ionic conductivity by thin film hetero-epitaxial engineering (2015) (16)
- Proton Conducting Hybrid Membranes Based on Aromatic Polymers Blends for Direct Methanol Fuel Cell Applications (2009) (16)
- Preparation of YBa2Cu3O7−δ powders by the thermal decomposition of a heteronuclear complex, CuY1/3Ba2/3(dhbaen)(NO3)1/3(H2O)3 (1999) (16)
- Sol−Gel Synthesis of NASICON: 1D and 2D NMR Investigation (1999) (16)
- Effects of Carbon Nanotubes on Human Monocytes (2009) (16)
- CHx adsorption (x = 1–4) and thermodynamic stability on the CeO2(111) surface: a first-principles investigation (2013) (16)
- Nonhydrolytic Synthesis of NASICON of Composition Na3Zr2Si2PO12: A Spectroscopic Study (2001) (16)
- Air, aqueous and thermal stabilities of Ce3+ ions in cerium oxide nanoparticle layers with substrates. (2014) (16)
- Propene Detection at High Temperatures Using Highly Sensitive Non-Nernstian Electrochemical Sensors Based on Nb and Ta Oxides (2010) (16)
- La2CuO4 sensing electrode configuration influence on sensitivity and selectivity for a multifunctional potentiometric gas sensor (2011) (16)
- A novel single chamber solid oxide fuel cell based on chemically stable thin films of Y-doped BaZrO3 proton conducting electrolyte (2010) (15)
- Room-Temperature Giant Persistent Photoconductivity in SrTiO 3 /LaAlO 3 (2012) (15)
- Diamond nucleation from the gas phase onto cold-worked Co-cemented tungsten carbide (2003) (15)
- Lattice disorder and texture in diamond coatings deposited by HFCVD on Co-cemented tungsten carbide (1996) (15)
- A primer of statistical methods for correlating parameters and properties of electrospun poly(L-lactide) scaffolds for tissue engineering--PART 2: regression. (2015) (15)
- Materials for Renewable and Sustainable Energy provides the connection between materials, energy, and sustainability (2012) (15)
- X-ray Photoelectron Spectroscopy Investigation of Corrosion Behavior of ASTM C71640 Copper-Nickel Alloy in Seawater ✫ (1992) (14)
- Superhard nanobuttons: constraining crystal plasticity and dealing with extrinsic effects at the nanoscale. (2010) (14)
- Influence of TiO 2 Nanometric Filler on the Behaviour of a Composite Membrane for Applications in Direct Methanol Fuel Cells. (2004) (14)
- Role of Dislocation Density on the Sample-Size Effect in Nanoscale Plastic Yielding (2012) (14)
- Thermal decomposition of Mg-Al hydroxides coprecipitated in the presence of oxalate ions (1992) (13)
- Influence of the electrode materials on the electrical response of Zno-based contact sensors (1998) (13)
- Synthesis Strategies for Improving the Performance of Doped‐BaZrO3 Materials in Solid Oxide Fuel Cell Applications (2015) (13)
- Electrical humidity response of sol–Gel processed undoped and alkali-doped TiO2–Al2O3 thin films (1999) (13)
- A Raman study of diamond film growth on Co-cemented tungsten carbide (1997) (12)
- Tailoring phase stability and electrical conductivity of Sr0.02La0.98Nb1–xTaxO4 for intermediate temperature fuel cell proton conducting electrolytes (2012) (12)
- Cerium Oxide Nanoparticles Re-establish Cell Integrity Checkpoints and Apoptosis Competence in Irradiated HaCat Cells via Novel Redox-Independent Activity (2018) (12)
- Nano-sized Pr0.8Sr0.2Co1-xFexO3 powders prepared by single-step combustion synthesis for solid oxide fuel cell cathodes (2010) (12)
- NMR and XRD study of the influence of the P precursor in sol-gel synthesis of NASICON powders and films (2002) (12)
- Iron-Doped MoO3 Nanosheets for Boosting Nitrogen Fixation to Ammonia at Ambient Conditions. (2021) (11)
- Alternative chemical route to mesoporous titania from a titanatrane complex (2005) (11)
- Preparation and Electrical Properties of Dense Ceramics with NASICON Composition Sintered at Reduced Temperatures (2004) (11)
- Effect of an ormosil-based filler on the physico-chemical and electrochemical properties of Nafion membranes (2007) (11)
- Preparation of NiCo metal powders by co-reduction of Ni (II) and Co(II) hydroxides for magnetoresistive sensors (1994) (11)
- Surface composition of alkali-dope TiO2 films for sensors investigated by XPS (1995) (11)
- Microstructural characterisation of Ni, Co and NiCo fine powders for physical sensors☆ (1995) (11)
- Enhanced Oxygen Evolution Activity of CoO–La0.7Sr0.3MnO3−δ Heterostructured Thin Film (2020) (11)
- Humidity Sensitive Electrical Properties of Dense ZnO with Non-Ohmic Electrode (1995) (11)
- Protection of Part-time Workers in the Case Law of the Court of Justice of the European Communities (2003) (10)
- Synthesis and Thermal Analysis of the Strontium and Iron-doped Lanthanum Cobaltite Nano-powder Precursors (2007) (10)
- 2D Vanadium Carbide (MXene) for Electrochemical Synthesis of Ammonia Under Ambient Conditions (2021) (10)
- Proton-conducting electrolytes based on silylated and sulfonated polyetheretherketone: Synthesis and characterization (2010) (10)
- Innovative Humidity Sensitive Electrical Properties of Sol‐Gel Processed Ceramic Thin Films. (1996) (10)
- THE ELECTRICAL PROPERTIES OF LA2CUO4/ZNO HETEROCONTACTS AT DIFFERENT RELATIVE HUMIDITIES (1995) (10)
- Localized compression and shear tests on nanotargets with a Berkovich tip and a novel multifunctional tip (2009) (10)
- A simple and versatile Sol-Gel method for the synthesis of functional nanocrystalline oxides. (2005) (10)
- Electrochemical Impedance Spectroscopy Analysis of Pr0.8Sr0.2Co0.5Fe0.5O3 − δ as Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells (2010) (10)
- Modelling of the humidity effect on the barrier height in SnO2 varistors (2006) (9)
- Evaluation of Electrode Performances of Single-Chamber Solid Oxide Fuel Cells (2005) (9)
- Apoptosis as Driver of Therapy-Induced Cancer Repopulation and Acquired Cell-Resistance (CRAC): A Simple In Vitro Model of Phoenix Rising in Prostate Cancer (2022) (9)
- Nanostructured TiO2-based mixed metal oxides prepared using microemulsions for carbon monoxide detection (2006) (9)
- EGFR/ErbB Inhibition Promotes OPC Maturation up to Axon Engagement by Co-Regulating PIP2 and MBP (2019) (9)
- Controllable Impregnation Via Inkjet Printing for the Fabrication of Solid Oxide Cell Air Electrodes (2013) (8)
- Fabrication of Proton Conducting Solid Oxide Fuel Cells by using Electrophoretic Deposition (2009) (8)
- NO2 adsorption behaviour on LaFeO3 electrodes of YSZ-based non-nernstian electrochemical sensors (2011) (8)
- Non‐Nernstian Planar Sensors Based on YSZ with Ta (10 at.%)‐Doped Nanosized Titania as a Sensing Electrode for High‐Temperature Applications (2006) (8)
- Nucleation and Growth of Diamond Films on Ni‐Cemented Tungsten Carbide: II, Effects of Deposition Conditions (1995) (8)
- Quantitative comparison of adhesive toughness for various diamond films on co-cemented tungsten carbide (2002) (8)
- Yttrium and Nickel Co-Doped BaZrO3 as a Proton-Conducting Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells (2015) (8)
- Thick film microsensors based on nanosized titania sol-gel powder (2000) (8)
- Thermal decomposition products of the heteronuclear complex, LaNi(dhbaen)(NO3)(H2O)n (2003) (8)
- Electrophoretic Deposition of Dense La0.8Sr0.2Ga0.8Mg0.115Co0.085O3−δ Electrolyte Films from Single-Phase Powders for Intermediate Temperature Solid Oxide Fuel Cells (2009) (8)
- Microstructure effect of nanocrystalline titanium dioxide prepared by microemulsion technique on photocatalytic decomposition of phenol (2006) (8)
- Microstructural characterization of MgFe2O4 powders (1990) (8)
- First-principles molecular dynamics simulations of proton diffusion in cubic BaZrO $$_3$$ 3 perovskite under strain conditions (2013) (7)
- Nanoceria acting as oxygen reservoir for biocathodes in microbial fuel cells (2019) (7)
- Improvement of DMFC Electrode Kinetics by Using Nanohorns Catalyst Support (2010) (7)
- Defect Engineering for Tuning the Photoresponse of Ceria-Based Solid Oxide Photoelectrochemical Cells. (2020) (7)
- Humidity Influence on the CO2Response of Potentiometric Sensors Based on NASICON Pellets with New Compositions, Na3Zr2−(x/4)Si2−xP1+xO12(x= 1.333) (2004) (7)
- Nano-Sized Semiconducting Oxide Powders for Thick Film Gas Sensors: From Powder Processing to Environmental Monitoring Devices (1999) (7)
- LaMnO3 Fine Powder Prepared by the Thermal Decomposition of a Heteronuclear Complex, LaMn(dhbaen)(OH)(NO3)(H2O)4 (1999) (7)
- Electric-field-induced current-voltage characteristics in electronic conducting perovskite thin films (2012) (7)
- Fe(III) grafted MoO3 nanorods for effective electrocatalytic fixation of atmospheric N2 to NH3 (2021) (7)
- Electrochemical investigation on carbon steel behaviour in CO-CO2-H2O environment for the interpretation of the SCC mechanism (1991) (7)
- BaZrxY1-xO3-d and BaCe1-x-zZrxYzO3-d Proton Conductors For Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) (2007) (6)
- Non-Nernstian Planar Sensors Based on YSZ with an Nb2O5 Electrode: Discussion on Sensing Mechanism (2006) (6)
- Humidity sensitive electrical properties of a novel ceramic heterocontact structure ZnO/BaPb0·8Bi0·2O3 (1999) (6)
- Leaching behaviour and CO2 sequestration capacity of accelerated carbonated MSWI APC residues (2007) (6)
- Preparation of Perovskite-type LaFe0.5Co0.5O3 by Thermal Decomposition of Heteronuclear Complex, {La[Fe0.5Co0.5(CN)6]·4H2O}X (1995) (6)
- Monodisperse Cu Cluster-Loaded Defective ZrO2 Nanofibers for Ambient N2 Fixation to NH3. (2021) (6)
- Solid Oxide Fuel Cells IV (2014) (6)
- Synthesis and Characterization of Y2Ru2O7 and Y2-XPrXRu2O7 for Cathode Application in Intermediate Temperature Solid Oxide Fuel Cells (2006) (6)
- Synthesis and Characterization of Novel Ionoconductor Gels for Biomedical Applications in Space (2001) (6)
- NMR study of sol–Gel processed NASICON (1999) (6)
- Steam Electrolysis by Proton-Conducting Solid Oxide Electrolysis Cells (SOECs) with Chemically Stable BaZrO3-Based Electrolytes (2015) (6)
- Maturation and demise of human primary monocytes by carbon nanotubes (2013) (6)
- Electrochemical Impedance Spectroscopy Investigation of the Anodic Functionalities and Processes in LSCM-CGO-Ni Systems (2015) (6)
- Non-Hydrolytic Routes for the Synthesis of NASICON (2000) (6)
- Epitaxial superlattices of ionic conductor oxides (2009) (6)
- Low Temperature Ethanol Steam Reforming in a Pd-Ag Membrane Reformer (2008) (6)
- Study of YSZ-based electrochemical sensors with oxide electrodes for high temperature applications (2002) (6)
- Testing Planar Gas Sensors Based on Yttria-stabilized Zirconia with Oxide Electrodes in the Exhaust Gases of a Spark Ignition Engine (2005) (6)
- Slow release of etoposide from dextran conjugation shifts etoposide activity from cytotoxicity to differentiation: A promising tool for dosage control in anticancer metronomic therapy. (2017) (5)
- Effects of tin phosphate nanosheet addition on proton-conducting properties of sulfonated poly(ether sulfone) membranes (2012) (5)
- Effect of service conditions on corrosion performance of alloy CN 108 tubes in MSF desalinators (1990) (5)
- Low-Temperature Preparation of Nanosized Crystalline LaFeO3 Powders (1996) (5)
- Non-Nernstian Electrochemical Sensors with a Nb2O5 Sensing Electrode for Engine Exhaust Monitoring (2009) (5)
- Layered tetratitanate intercalating sulfanilic acid for organic/inorganic proton conductors (2012) (5)
- Improving the Performance of High Temperature Protonic Conductor (HTPC) Electrolytes for Solid Oxide Fuel Cell (SOFC) Applications (2009) (4)
- The thermal behaviour of the hydroxide mixtures used for the synthesis of MgFe2O4 spinel (1992) (4)
- Low Temperature Sol-Gel Preparation of β-Al2TiO5 Thin Films: Spectroscopic Analysis of the Precursors (2000) (4)
- Co-sintering of dense YSZ electrolyte films on porous NiO-YSZ supporting anodes for IT-SOFCs (2005) (4)
- High Temperature Operation of Direct Ethanol Fuel Cells with Nafion-TiO2 Membranes and PtSn/C Electrocatalysts (2009) (4)
- Incorrect cathodic protection connection leads to rebar corrosion (1995) (4)
- Nafion/Tin Oxide Composite Membranes for Direct Methanol Fuel Cells (2009) (4)
- New chemical routes for preparation of ultrafine NiO-YSZ powders for SOFC anode applications (2003) (4)
- Combustion Synthesis and Characterization of Pr0.8Sr0.2Co1-xFexO3 Nanocrystalline Powders (2006) (4)
- Electrical Characterization of Semiconducting La2CuO4 for Potentiometric Gas Sensor Applications (2006) (4)
- Diamond Synthesis on Silicon Nitride by the Hot Filament Chemical Vapor Deposition Technique (1998) (4)
- Preparation of Ceramic Composite Membranes by Microwave Heating (2004) (4)
- A Soft Chemistry Route for the Synthesis of Nanostructured Pb2Ru2O6.5 with a Controlled Stoichiometry (2008) (4)
- Synthesis and Characterization of BaZr 0.8 Y 0.2 O 3 Protonic Conductor for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) (2006) (4)
- There is still plenty of room at the bottom: Nanostructured Materials 2010 (2011) (3)
- Nafion-Mesoporous Silica as Electrolyte for Ethanol Fuel Cells (2009) (3)
- Pulsed Laser Deposition of Superlattices Based on Ceria and Zirconia (2011) (3)
- Ceria-Based Thin Film Hetero-structure Growth and Characterization for SOFC Applications (2007) (3)
- NOx Sensors Based on Interfacing Yttria Stabilized Zirconia with p and n-Type Semiconducting Oxides (2001) (3)
- Study of the thermal behaviour of hydroxide mixtures aimed at the preparation of Mg-Al spinels (1991) (3)
- Influence of ceria nanoparticles on chemical structure and properties of segmented polyesters. (2015) (3)
- Synthesis, Characterization, and Densification of Samaria Doped Ceria Ultra-Fine Powders (2006) (3)
- A Theoretical Framework for Prediction of Solid State Potentiometric Gas Sensor Behavior. (2006) (3)
- Electrode Performance of Nanostructured La1-aSraCo1-bFebO3-x on a Ce0.8Sm0.2O2 Electrolyte Prepared by Citrate-Nitrate Auto-Combustion (2006) (3)
- Crystallization of Al2O3-TiO2 sol-gel systems (1999) (3)
- Materials Challenges Toward Proton-Conducting Oxide Fuel Cells: A Critical Review (2011) (3)
- Degradation of oxide varistor ceramics in air atmosphere containing NO2 at elevated temperatures (2004) (3)
- Pulsatile Discharge from Polymeric Scaffolds: A Novel Method for Modulated Drug Release (2019) (3)
- Tissue Engineering: Stem Cell Aligned Growth Induced by CeO2 Nanoparticles in PLGA Scaffolds with Improved Bioactivity for Regenerative Medicine (Adv. Funct. Mater. 10/2010) (2010) (3)
- Proton Conducting Composite Membranes from Polyether Ether Ketone and Hydrated Metal Oxides (2006) (2)
- Exploring Mixed Protonic/Electronic Conducting Oxides as Cathode Materials for Intermediate Temperature SOFCs Based on Proton Conducting Electrolytes (2011) (2)
- Potentiometric Detection of VOCs using Non-Nernstian SmFeO 3 /Pt/YSZ/Pt Sensors (2006) (2)
- Improving the performance of SOFC anodes by decorating perovskite with Ni nanoparticles (2013) (2)
- Influence of Humidity on Electrochemical CO2 Sensors Based on Sol-Gel Processed NASICON with New Compositions (2000) (2)
- SPEEK-based Composite Membranes for Direct Methanol Fuel Cells (2008) (2)
- Some structural considerations on the perovskite‐type A1‐ySryCo1‐xFexO3‐δ solid solution series (2010) (2)
- A Tri-Layer Proton-Conducting Electrolyte for Chemically Stable Operation in Solid Oxide Fuel Cells (2013) (2)
- Pr0.8Sr0.2Co1-xFexO3 Nanocrystalline Powders: Electrochemical Characterization for Solid Oxide Fuel Cell Cathodes (2006) (2)
- Electrochemical Properties of Nanocrystalline Y2-xPrxRu2O7 Pyrochlore for Electrodic Application in IT-SOFCS (2006) (2)
- Preparation of Perovskite‐Type LaFexCo1‐xO3 by Thermal Decomposition of Heteronuclear Complex, La[FexCo1‐x(CN)6]×nH2O for Electroceramic Applications. (1998) (2)
- Bi2Ru2O7 Pyrochlore Electrodes for Bi2O3 Based Electrolyte for IT-SOFC Applications (2006) (2)
- Nanocrystalline Oxides Improve the Performances of Polymeric Electrolytes (2005) (2)
- ZrO2/C Nanosphere Enables High‐Efficiency Nitrogen Reduction to Ammonia at Ambient Conditions (2022) (2)
- Synthesis and characterization of strontium and iron-doped lanthanum cobaltite nanocrystalline powders for single chamber solid oxide fuel cells (2005) (2)
- BaZr(0.8)Y(0.2)O(3-delta)-NiO Composite Anodic Powders for Proton-Conducting SOFCs Prepared by a Combustion Method (2017) (2)
- Nanocrystalline Oxides for Gas Sensing (2002) (2)
- Electrochemical Impedance Spectroscopy Analysis of Pr 0.8 Sr 0.2 Co 0.5 Fe 0.5 O 3 as Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells (2010) (2)
- anohybrid PVA/ZrO_2 and PVA/Al_2 O_3 Electrospun Mats (2008) (2)
- Design of Ceramic Materials for Chemical Sensors with Intelligent Properties (1995) (2)
- Proton conductors for solid oxide fuel cells (SOFCs) (2012) (2)
- Factors affecting the corrosion behaviour of CN 108 alloy in sea water (1989) (2)
- Humidity influence of the CO2 response of potentiometric sensors based on Nasicon pellets with new compositions (2002) (2)
- Sol-gel synthesis, sintering and electrical properties of Nasicon having new compositions (1998) (2)
- Screen-Printed Dense Yttria-Stabilized-Zirconia Electrolytes for Anode-Supported Solid Oxide Fuel Cells. (2006) (1)
- Increasing the Operating Temperature of Nafion Membranes with Addition of Nanocrystalline Oxides for Direct Methanol Fuel Cells (2002) (1)
- Soft Chemistry Routes for the Synthesis of Sr0.02La0.98Nb0.6Ta0.4O4 Proton Conductor (2011) (1)
- Preparation and characterization of lead ruthenate based composite cathodes for SOFC applications (2004) (1)
- Single Chamber Solid Oxide Fuel Cells (SC-SOFCs) based on a Proton Conducting Electrolyte (2009) (1)
- Influence of titania morphology on the electrochemical properties of composite polymer electrolyte membranes (2008) (1)
- Cardiac and Mesenchymal Stem Cell Growth and Selective Differentiation on Three Dimensional Bioerodable Scaffolds (2007) (1)
- Development of new ceramic doped ionoconducting membranes for biomedical applications. (2002) (1)
- Composite Cathodes on Barium Cerate Proton Conducting Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) (2008) (1)
- Tailoring the structural and microstructural properties of nanosized tantalum oxide for high temperature electrochemical gas sensors. (2009) (1)
- Nanostructured Metal Oxides : Processing and Applications (2006) (1)
- Erratum: The critical role of water in spider silk and its consequence for protein mechanics (Nanoscale (2011) 3 (DOI: 10.1039/c1nr10502g)) (2011) (1)
- Nanostructured Ceria-Zirconia as a Promising Anode Component for IT-SOFC: Synthesis and Characterization (2006) (1)
- Fabrication and Electrochemical Performance of IT-SOFCs Based on Doped-Lanthanum Gallate Films by Electrophoretic Deposition (2008) (1)
- Intermediate Temperature Polymer Electrolyte Membranes via Inorganic Cross-Linking of Hybrid Polymers (2006) (1)
- Nanostructured Cathodes: Tailoring the Cathode-Electrolyte Interface with Nanoparticles for Boosting the Solid Oxide Fuel Cell Performance of Chemically Stable Proton-Conducting Electrolytes (Small 32/2018) (2018) (1)
- Sensing Mechanism of Non-Nernstian Planar Sensors Based on YSZ with Oxide Electrodes (2006) (1)
- Nanocomposite SPEEK/Titania Nanosheets (TNS) Proton Exchange Membranes for Fuel Cell Applications (2009) (1)
- Electrical Properties of Ba3Ca1.18Nb1.82O9-δ Proton-Conducting Electrolyte Prepared by a Combustion Method (2013) (1)
- European Solidarity Requires EU Taxes (2020) (1)
- RuO2-based dense electrodes for ESB electrolyte IT-SOFCs (2005) (1)
- Nonhydrolytic Synthesis of NASICON of Composition Na3Zr2Si2PO12: A Spectroscopic Study. (2001) (1)
- Proton conducting electrolyte membranes based on tungsten oxide and sulfonated polyether ether ketone hybrid composites (2005) (1)
- Investigation of Steel Passivation in Inhibited Cooling Waters by Electrochemical Impedance Spectroscopy (1992) (1)
- Layered Titanates Intercalating Organic Guest Spacers for Organic/Inorganic Proton Conductors (2011) (1)
- Designing cathodic protection for a piping network with low coating resistance (1992) (1)
- Sol-gel synthesis of λ-Na2O.xAl2O3 films (2003) (1)
- Electrical Properties of Sol-Gel Processed Hybrid Films (2003) (1)
- Grabbing pebbles out of my shoes: Thoughts of a grumpy old researcher on publishing research (2017) (1)
- Two case studies of thick film sensing devices:some critical steps in the processing of screen-printed sensors (2001) (1)
- Improving the Performance of Solid Oxide Fuel Cells with BaZrO3 Electrolyte by Using Sinteractive Anodic Powders (2012) (1)
- Spectroscopic Monitoring of Sol-Gel Syntheses of Heterometallic Ceramics (2003) (1)
- Highly sensitive ultra-thin optical CO2 gas sensors using nanowall honeycomb structure and plasmonic nanoparticles (2022) (1)
- Solid electrolyte sensors for NO2 detection without using a reference atmosphere (2001) (1)
- Sulphonated poly ether ether ketone/amino-diphenylsilandiol composite electrolyte for PEM fuel cells (2012) (1)
- Process and characterization of ysz thick-films deposited by electrophoretic deposition for intermediate-temperature SOFC (2003) (1)
- BaCe1-x-yZrxYyO3-d Protonic Conductor for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) (2008) (1)
- Electrochemical NOx Sensors for Emission Control of Automotive Exhaust Gas (2001) (1)
- Functionalized ORMOSIL-Based Hybrid Membranes for Polymer Electrolyte Membrane Fuel Cells (2005) (0)
- Room temperature chemical route for the synthesis of nanocrystalline doped ceria for SOFCs (2004) (0)
- A Defective Iron-Based Perovskite Cathode for High-Performance It-Sofcs:Tailoring the Oxygen Vacancies Using Nb/Ta Co-Doping (2022) (0)
- Exploring Highly Yttrium Doped Barium Zirconate Proton Conductor Electrolytes for Application in Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) (2009) (0)
- Safe-Shields: Basal and Anti-UV Protection of Human Keratinocytes by Redox-Active Cerium Oxide Nanoparticles Prevents UVB-Induced Mutagenesis (2023) (0)
- NiO-YSZ foams with hierarchical microstructure for SOFC anodes (2005) (0)
- Biodegradable microgrooved surfaces for skeletal muscle regeneration (2007) (0)
- Electrochemical characterization of anode supported SOFC prepared by co-firing technique (2005) (0)
- Composite PLLA-PCL Fibrous Scaffolds For Improved Mechanical Strength and Better Biological Performance (2008) (0)
- Low Temperature Synthesis and Electrochemical Properties of M 0.8 Sr 0.2 Co 1-x Fe x O 3 (M = Ba, La, Pr) Nanoparticles: Effect of Grain Size on Lattice Symmetry (2006) (0)
- Electrosynthesis and Analytical Characterization of Bioactive Nanoparticles and Nanocomposite Materials Displaying Controlled Release Properties (2006) (0)
- Tailoring Protonic and Mixed Protonic/Electronic Conductivity of Barium Zirconate by Y and Pr Co-Doping for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) (2010) (0)
- Polymer Electrolyte Fuel Cells (2013) (0)
- The Effect of Barium Non-Stoichiometry on the Phase Structure , Sintering and Electrical Conductivity of BaZr 0 (2015) (0)
- Co-Sintering of Dense Electrophoretically Deposited YSZ Films on Porous NiO-YSZ Substrates for SOFC Applications (2004) (0)
- Morphology of cerium oxide surfaces in an oxidzing enviroment:a first-principles investigation (2007) (0)
- 2007 ECS SUMMER FELLOwSHIP REPORTS (2007) (0)
- Cells and Stacks V - Proton Conducting Cells (2017) (0)
- RARE EARTH PEROVSKITE-TYPE OXIDES AS GAS SENSORS (1999) (0)
- Effect of Mg2+ Doping on the Structural, Thermal, and Electrochemical Properties of LiNi0.8Co0.16Mg0.04O2. (2004) (0)
- Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs) Based on a Thin Protonic Conductor Electrolyte (2009) (0)
- Keynote Presentation: Rational Approach for Designing Cathode Materials for Proton Conducting Electrolytes Operating at 600°C (2014) (0)
- Electrochemical impedance spectroscopy studies of Perovskiteiysz ceramic films (2003) (0)
- Development of chemically-stable proton conducting BZY electrolytes for SOFCs at WPI-MANA, NIMS (2011) (0)
- Investigations into the relationship between the Corrosion behaviour of CN 108 alloy in sea water and the chemical composition of its corrosion products (1992) (0)
- Preparation of Nanosized Perovskite‐Type LaMnO3 Powders Using the Thermal Decomposition of a Heteronuclear Complex LaMn(dhbaen)(OH)(NO3)(H2O)4. (2001) (0)
- Electrochemical behaviour of Co-doped LSGM perovskites prepared by sol-gel synthesis (2004) (0)
- Fundamental Studies 3 (2015) (0)
- SOL-GEL SYNTHESIS AND PHASE PURITY OF Lai.xSrxGal yMgyO3.s SOLID ELECTROLYTES (2017) (0)
- Solid State Ionic Devices II (2014) (0)
- Development of a screen-printed planar sensor for environmental monitoring (2001) (0)
- News and analysis on materials solutions to energy challenges (2014) (0)
- High surface area nano-material for gas pollution monitoring (2005) (0)
- Fabrication of Ce1-xGdxO2-0.5x Electrolytes with Tunable Dense Microstructures for IT-SOFC Applications (2007) (0)
- Improving the Proton Conductivity of Yttrium-Doped Barium Zirconate Electrolytes Towards the Development of Intermediate Temperature Solid Oxide Fuel Cells (2010) (0)
- Do Oxygen-Ion Conductors Feel the Strain (2012) (0)
- CVD diamond as a wear-resistant coating for cutting tools, Part 1 (2004) (0)
- Crosslinked Organic/Inorganic Hybrid Proton Exchange Polymeric Membranes (2005) (0)
- Sol-gel synthesis and phase purity of La1-xSrxGa1-yMgyO3-δ solid electrolytes (2003) (0)
- Influence of A-site Deficiency in BaZr 0.8 Y 0.2 O 3-δ on the Performance of La 0.6 Sr 0.4 Co 0.2 Fe0.8O 3-δ -BaZr 0.8 Y 0.2 O 3-δ Composite Cathodes (2013) (0)
- Towards Solid Oxide Fuel Cells (SOFCs) with Proton Conducting Electrolytes Operating at Low Temperature: Is the Scale-up Feasible? (2017) (0)
- Interfacial Effects on the Ionic Conductivity of Thin Film Electrolytes for Micro-Solid Oxide Fuel Cells (2010) (0)
- Effectof a Proton Conducting Filleron the Physico-ChemicalPropertiesofSPEEK- BasedMembranes (2009) (0)
- Improving the Performance of Intermediate Temperature Solid Oxide Fuel Cells Based on BaZrO3 Proton Conducting Electrolyte (2011) (0)
- Electrochemical Characterization of Columnar Anodic Thin Films Deposited By Pulsed Laser Deposition (2015) (0)
- Low Temperature DMFCs for Portable Applications (2007) (0)
- Combustion Synthesis of Pr0.8Sr0.2Co1-xFexO3 Nanopowders and Their Characterization for Possible Application in Energy Devices (2006) (0)
- Solid-state ionics--2006 : symposium held November 27-December 1, 2006, Boston, Massachusetts, U.S.A. (2007) (0)
- Material and CO Sensing Properties of SnO2 Thick Films with Sol Stability Time (2003) (0)
- Bi2Ru2O7.5 Pyrochlore Electrodes for Bi2O3 Based Electrolyte IT-SOFC (2006) (0)
- Solid-State Ionics--2008 : symposium held December 1-5, 2008, Boston, Massachusetts, U.S.A. (2009) (0)
- Synthesis and Densification of Nanometric Ce 0.8 Sm 0.2 O 1.9-δ (2006) (0)
- Intermediate Temperature Solid Oxide Fuel Cells Based on a Thin BaZr1-xYxO3-δ Proton Conductor Electrolyte (2010) (0)
- Ormosil-Nafion Composite Membranes for PEM Fuel Cells (2006) (0)
- Ceramic Oxygen Separation Membranes and Mixed Conductors (2001) (0)
- A novel synthetic approach of cerium oxide nanoparticles with improved biomedical activity (2017) (0)
- Environmentally Friendly and Sustainable Source of Energy from Photovoltaics and Fuel Cells (2006) (0)
- RuO2 and Pt Based Electrodes for ESB Electrolyte IT-SOFC (2006) (0)
- SOLID ELECTROLYTE NOx GAS SENSOR USING PEROVSKITE-TYPE OXIDE ELECTRODES (2000) (0)
- 3D Liver Models: Biofabrication of Hepatic Constructs by 3D Bioprinting of a Cell‐Laden Thermogel: An Effective Tool to Assess Drug‐Induced Hepatotoxic Response (Adv. Healthcare Mater. 21/2020) (2020) (0)
- Influence of Sintering on Electrochemical Properties of Nanocrystalline Doped-Ceria (2006) (0)
- Stumbling on extrinsic effects in super-hard nanobuttons (2009) (0)
- Cerium oxide nanoparticles inhibit differentiation of neural stem cells (2017) (0)
- Tax Amnesties of EU Member States and Their Compatibility with EU Law (2010) (0)
- Study of the Influence of the Morphology on the Proton Conductivity of Y-doped Barium Zirconate Thin Films. (2009) (0)
- Fabrication and Ionic Conducting Properties of Superlattices Based on Ceria and Zirconia (2011) (0)
- Use of intelligent ceramic materials as a strategy for the development of chemical sensors (1996) (0)
- H. Aono, Y. Sadaoka, E. Traversa, L. Montanaro (1998) (0)
- Writing Scientific Papers in English: Talent or Training?(at NIMS Open Seminar, March 9, 2009) (2009) (0)
- Study of Planar Sensors Based on YSZ with Nb2O5 Sensing Electrode (2006) (0)
- Pr0.8Sr0.2Co1-xFexO3 Nanocrystalline Powders: Electrochemical Characterization and Potential Application as Fuel Cell Electrodes (2006) (0)
- Nano-materials for sensitized solar cells (2015) (0)
- Synthesis, spectroscopic and electrochemical characterization of hybrid membranes for Polymer Electrolyte Membrane Fuel Cells. (2004) (0)
- Cerium Dioxide Nanoparticles Protect Cardiac Progenitor Cells against the Oxidative Stress (2014) (0)
- Synthesis, sintering behavior and characterization of new nasicon composition (1997) (0)
- Tailoring Electrode Materials for Proton-Conducting Solid Oxide Fuel/Electrolysis Cells with Chemically Stable BaZrO3 Electrolyte (2016) (0)
- High-Performance Composite Cathode with Tailored Microstructure and Mixed Conductivity for Application in Intermediate Temperature Solid Oxide Fuel Cells Based on Proton Conducting Electrolytes (2011) (0)
- Synthesis and Characterization of Y2Ru2O7 and Doped Y2-xLnxRu2O7 (Ln=Eu,Pr) for Cathode Application in Intermediate Temperature Solid Oxide Fuel Cells (2006) (0)
- 0 O ct 2 01 3 CH x adsorption ( x = 1-4 ) and thermodynamic stability on the CeO 2 ( 111 ) surface : A first-principles investigation (2019) (0)
- Hiroaki Yanagida: A man with a vision (2010) (0)
- Nb and Ta Oxides-Based Electrochemical Sensors for Detection of Hydrocarbons at High Temperatures. (2007) (0)
- Exhaust Gas Electrochemical Sensors with a Nb2O5 Sensing Electrode (2008) (0)
- Metastable Thin Films for Energy Applications: On Structural Lattice Anomalies and Electrical Transport (2012) (0)
- SYNTHESIS AND CHARACTERIZATION OF BaCe i , Y ) , 03 _ 5 PROTONIC CONDUCTOR (2010) (0)
- Performance of Solid Oxide Fuel Cells with In-Doped BaZrO3 Electrolyte Films on Different Anode Substrates (2011) (0)
- Hybrid Membranes Based on Aromatic Polymer Blends for Fuel Cell Applications (2008) (0)
- Tensile Lattice Distortion Does Not Significantly Affect Oxygen Transport in Yttria-stabilized Zirconia ( YSZ ) – CeO 2 Hetero-Interfaces (2012) (0)
- NiO-YSZ Foams for Anodic Application in SOFCs (2006) (0)
- Editorial: Chemistry, a Sustainable Bridge From Waste to Materials for Energy and Environment (2021) (0)
- Mechanism of LaFeO3 Perovskite-Type Oxide Formation from the Thermal Decomposition of d-f Heteronuclear Complex La(Fe(CN)6)×5 H2O. (1996) (0)
- Organic/Inorganic Proton Conductors Based on Layered Titanates (2011) (0)
- Evaluation of the gas response of ZnO/La{sub 2}CuO{sub 4} hetero-contacts with different electrode materials (1994) (0)
- First principles MD simulations of proton diffusion in cubic perovskite BaZrO$_{3}$ (2012) (0)
- Sol-gel synthesis of lambda-Na2O·xAl2O3 films (2003) (0)
- CO2-Stable Alkaline-Earth-Free Solid Oxide Fuel Cells with Ni0.7Co0.3O-Ce0.8Sm0.2O1.9 Composite Cathodes (2017) (0)
- DEVELOPMENT OF NANOSIZED TITANIA SENSING LAYERS (2001) (0)
- High-Temperature Potentiometric NO 2 and CO Sensors Based on Stabilized Zirconia with Oxide Sensing Electrodes (2002) (0)
- First principle investigation of ZrO$_2$-CeO$_2$ heterojunction properties (2011) (0)
- Chemically Stable Proton Conducting Electrolytes for Solid Oxide Fuel Cells Operating at 600°C (2013) (0)
- Nanocomposite polymeric electrolytes to record electrophysiological brain signals in prolonged, unconventional or extreme conditions. (2006) (0)
- Preparation of Dense Thin Films by Sol-Gel With Very High Humidity Sensitivity (1995) (0)
- Nucleation and Growth of Diamond Films on Ni-Cemented Tungsten Carbide: Effects of Substrate Pretreatments. (1995) (0)
- TitaniaNanosheets ( TNS ) / SulfonatedPolyEtherEtherKetone ( SPEEK ) Nanocomposite Proton Exchange Membranes for Fuel Cells † (2009) (0)
- Exploring Mixed Protonic/Electronic Conducting Oxides as Cathode Materials for Intermediate Temperature SOFCs Based on High Temperature Proton Conductor Electrolytes (2011) (0)
- ZrO2-CeO2 Interface Properties: A First-Principle Investigation (2011) (0)
- Co-sintering of dense electrophoretically deposited LSGMC films on NiO-GDC anode for SOFC applications (2005) (0)
- Impregnation Based Electrodes for Solid Oxide Fuel and Electrolysis Cells, the State-of-the-Art and Perspectives (2015) (0)
- Co-sintering of Dense Electrophoretically Deposited LSGMC Films on Porous Ni-O-GDC Substrate for SOFC Applications (2006) (0)
- Microstructural and electrical properties of the sofc anode precursor YSZ/NiO composite prepared by A liquid mixture technique (2005) (0)
- Grain size effect on the conductivity of nanocrystalline gadolinia-doped ceria (2004) (0)
- Publisher’s Note: Non-Nernstian Electrochemical Sensors with a Nb2O5 Sensing Electrode for Engine Exhaust Monitoring [ J. Electrochem. Soc. , 156 , J12 (2009) ] (2009) (0)
- Mesoporous thin films for chemical sensors (2000) (0)
- Microstructure of Pt particles and aggregates deposited on different carbon materials for fuel cells application (2008) (0)
- Thermal, Electrochemical and In-Situ Structural Study of Stabilized LiNiyCo1-y-zMzO2 (M = Al and Mg) Lithium-Ion Cathode Materials Prepared by a Soft Chemistry Route (2001) (0)
- Synthesis and characterization of BaCe 1x Y x O 3-δ protonic conductor (0)
- 2008 Summer Fellowship Committee (2008) (0)
- Structural and Electrochemial Properties of A1-ySryCo1-xFexO3 (A=Ba, La, Pr, Sm; y=0.2, 0.5; 0.0 (2008) (0)
- Grabbing pebbles out of my shoes: Thoughts of a grumpy old researcher on funding (2017) (0)
- Nanostructured multiferroic materials for optoelectronics and energy-related nanodevices (2011) (0)
- Synthesis and Characterization of Trimetallic Rare Earth Orthoferrites, La x Sm 1–x FeO₃ (2000) (0)
- Investigation on the Sensing Mechanism of Potentiometric Sensors with an Nb2O5 Sensing Electrode (2006) (0)
- Synthesis and Characterization of Nanometric Samaria Doped Ceria (SDC) Microstructure Sintered by Fast Firing Process (2006) (0)
- The Privilege of Working with Ladies (2011) (0)
- Synthesis of Heteronuclear Complexes, Ln'Ln"_ [Co(CN)_6]・nH_2O and Their Structural Characterization (1996) (0)
- 2010 Summer Fellowship Committee (2010) (0)
- Ceramic Foams for SOFC Applications. (2006) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Enrico Traversa?
Enrico Traversa is affiliated with the following schools: