Frédéric Barlat

Q: What Schools Are Affiliated With Frédéric Barlat

Frédéric Barlat is affiliated with the following schools: Pohang University of Science and Technology, Grenoble Institute of Technology, Graduate Institute of Ferrous Technology, University of Aveiro, Korea University

Frédéric Barlat's AcademicInfluence.com Rankings

Frédéric Barlat

Engineering

#3439

World Rank

#4518

Historical Rank

Mechanical Engineering

#266

World Rank

#304

Historical Rank

Applied Physics

#836

World Rank

#858

Historical Rank

engineering Degrees

Download Badge

Engineering

Why Is Frédéric Barlat Influential?

(Suggest an Edit or Addition)

According to Wikipedia, Biography Professor Frédéric Barlat is a French/American scientist in the field of plasticity, damage and metal forming. He is currently the director of A&S Center at Graduate Institute of Ferrous Technology at Pohang University of Science and Technology in South Korea. Professor Barlat's contribution in the field of plasticity, particularly his models on anisotropic plasticity of metallic materials, has been recognized worldwide.

(See a Problem?)

Frédéric Barlat's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Plane stress yield function for aluminum alloy sheets—part 1: theory (2003) (1401)
Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions (1989) (1133)
A six-component yield function for anisotropic materials (1991) (995)
Linear transfomation-based anisotropic yield functions (2005) (843)
Orthotropic yield criterion for hexagonal closed packed metals (2006) (667)
Yield function development for aluminum alloy sheets (1997) (512)
A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals (2004) (411)
Plane stress yield functions for aluminum alloy sheets (2002) (338)
An alternative to kinematic hardening in classical plasticity (2011) (336)
Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function (2006) (309)
Plane stress yield function for aluminum alloy sheets—part II: FE formulation and its implementation (2004) (288)
Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals (2008) (281)
Generalization of Drucker's Yield Criterion to Orthotropy (2001) (276)
Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals (1987) (261)
Continuous, large strain, tension/compression testing of sheet material (2005) (253)
Yielding description for solution strengthened aluminum alloys (1997) (245)
Strain rate sensitivity of the commercial aluminum alloy AA5182-O (2005) (244)
Continuum Scale Simulation of Engineering Materials Fundamentals - Microstructures - Process Applications (2004) (235)
On linear transformations of stress tensors for the description of plastic anisotropy (2007) (230)
Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: Part I: theory and formulation (2005) (225)
Advances in anisotropy and formability (2010) (214)
Prediction of tricomponent plane stress yield surfaces and associated flow and failure behavior of strongly textured f.c.c. polycrystalline sheets (1987) (197)
Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardening (2006) (184)
A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys (2002) (182)
Prediction of the forming limit diagrams of anisotropic sheets in linear and non-linear loading (1985) (181)
Characterization of the post-necking strain hardening behavior using the virtual fields method (2013) (176)
EXTENSION OF HOMOGENEOUS ANISOTROPIC HARDENING MODEL TO CROSS-LOADING WITH LATENT EFFECTS (2013) (165)
Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample (2003) (155)
Experimental and theoretical formability analysis using strain and stress based forming limit diagram for advanced high strength steels (2013) (153)
Earing predictions based on asymmetric nonquadratic yield function (2000) (147)
Plastic behaviour and stretchability of sheet metals. Part II: Effect of yield surface shape on sheet forming limit (1989) (144)
Application of the theory of representation to describe yielding of anisotropic aluminum alloys (2003) (142)
Work-hardening model for polycrystalline metals under strain reversal at large strains (2007) (141)
Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels (2014) (134)
New convex yield functions for orthotropic metal plasticity (2013) (134)
Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear (2003) (133)
A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels (2013) (131)
Formability of AA5182/polypropylene/AA5182 sandwich sheets (2003) (129)
Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction (2012) (125)
Correlations between nanoindentation hardness and macroscopic mechanical properties in DP980 steels (2014) (121)
Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation (2017) (110)
An application of homogeneous anisotropic hardening to springback prediction in pre-strained U-draw/bending (2012) (107)
Strain rate dependent tensile behavior of advanced high strength steels: Experiment and constitutive modeling (2013) (106)
A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming (1999) (104)
Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling (2015) (91)
A new analytical theory for earing generated from anisotropic plasticity (2011) (89)
Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets (2005) (88)
Elastic-viscoplastic anisotropic modeling of textured metals and validation using the Taylor cylinder impact test (2007) (88)
Blank shape design for a planar anisotropic sheet based on ideal forming design theory and FEM analysis (1997) (87)
Strain rate potential for metals and its application to minimum plastic work path calculations (1993) (87)
A sheet tension/compression test for elevated temperature (2012) (84)
Extension of quasi-plastic-elastic approach to incorporate complex plastic flow behavior - application to springback of advanced high-strength steels (2013) (84)
Modelling the plastic behaviour of metals under complex loading conditions (2011) (83)
Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels (2012) (83)
Comparative study of the prediction of microstructure and mechanical properties for a hot-stamped B-pillar reinforcing part (2011) (81)
Artificial aging and shear deformation behaviour of 6022 aluminium alloy (2004) (81)
Strain hardening response and modeling of EDDQ and DP780 steel sheet under non-linear strain path (2013) (80)
Nonlinear elastic behaviors of low and high strength steels in unloading and reloading (2013) (80)
Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential (1996) (80)
A comparison of the mechanical behaviour of an AA1050 and a low carbon steel deformed upon strain reversal (2005) (73)
The forming limit diagram of ferritic stainless steel sheets: Experiments and modeling (2012) (73)
Determination of Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method (2014) (72)
Development of a one point quadrature shell element for nonlinear applications with contact and anisotropy (2002) (69)
Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel (2015) (68)
Constitutive and friction modeling for accurate springback analysis of advanced high strength steel sheets (2015) (68)
EBSD study of micromechanisms involved in high deformation ability of DP steels (2015) (65)
A Yield Function for Orthotropic Sheets under Plane Stress Conditions (1989) (65)
Strain hardening rate sensitivity and strain rate sensitivity in TWIP steels (2015) (63)
Modeling of deformation texture development based on rate independent crystal plasticity (1997) (62)
A novel approach for anisotropic hardening modeling. Part I: Theory and its application to finite element analysis of deep drawing (2009) (62)
An effective computational algorithm for rate-independent crystal plasticity based on a single crystal yield surface with an application to tube hydroforming (2007) (62)
Effect of martensitic phase transformation on the behavior of 304 austenitic stainless steel under tension (2016) (61)
Characterization of fracture in medium Mn steel (2017) (60)
Creep and anelasticity in the springback of aluminum (2004) (60)
Hardening behavior and structural evolution upon strain reversal of aluminum alloys (2002) (60)
Delamination cracking in advanced aluminum-lithium alloys - Experimental and computational studies (2009) (60)
Modeling of localization and fracture phenomena in strain and stress space for sheet metal forming (2016) (60)
Macroscopic anisotropy in AA5019A sheets (2000) (59)
Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system (1995) (59)
Anisotropic potentials for plastically deforming metals (1993) (59)
Anticlastic curvature in draw-bend springback (2005) (58)
Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate (2007) (56)
Characterization and modeling of the mechanical behavior and formability of a 2008-T4 sheet sample (1989) (56)
Formability prediction of advanced high strength steels using constitutive models characterized by uniaxial and biaxial experiments (2013) (55)
Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect (2014) (54)
An extended Modified Maximum Force Criterion for the prediction of localized necking under non-proportional loading (2015) (53)
Precipitate-induced anisotropy in binary Al-Cu alloys (1998) (53)
Stress relaxation and its effect on tensile deformation of steels (2013) (53)
The effect of plastic anisotropy on compressive instability in sheet metal forming (2000) (52)
Mechanical behavior of low carbon steel subjected to strain path changes:Experiments and modeling (2016) (52)
Stress integration schemes for novel homogeneous anisotropic hardening model (2012) (52)
Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction (2009) (51)
Anisotropic plastic potentials for polycrystals and application to the design of optimum blank shapes in sheet forming (1994) (51)
On through thickness crystallographic texture gradient in Al-Li-Cu-Zr alloy (1988) (50)
An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals (2008) (49)
Finite element modeling of tube hydroforming of polycrystalline aluminum alloy extrusions (2006) (48)
Combined Effects of Anisotropy and Tension-Compression Asymmetry on the Torsional Response of AZ31 Mg (2014) (47)
Mechanical, microstructural behaviour and modelling of dual phase steels under complex deformation paths (2017) (47)
Advances in Sheet Forming—Materials Modeling, Numerical Simulation, and Press Technologies (2011) (45)
Analysis of sheet metal formability through isotropic and kinematic hardening models (2011) (45)
Formability of austenitic and ferritic stainless steels at warm forming temperature (2013) (44)
Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending (2017) (44)
Non-isothermal kinetics model to predict accurate phase transformation and hardness of 22MnB5 boron steel (2015) (43)
Yield Surface Plasticity and Anisotropy (2005) (43)
On precipitate induced hardening in crystal plasticity: theory (2004) (41)
Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel (2016) (41)
Measurement and modeling of simple shear deformation under load reversal: Application to advanced high strength steels (2015) (40)
Numerical and experimental study of the cold expansion process in 7085 plate using a modified split sleeve (2007) (40)
Damage mechanism and modeling of void nucleation process in a ferrite–martensite dual phase steel (2014) (40)
Experimental and Analytical Investigations on Plane Strain Toughness for 7085 Aluminum Alloy (2009) (40)
Crystal plasticity finite element analysis of ferritic stainless steel for sheet formability prediction (2017) (39)
Effect of solute distribution on the strain rate sensitivity of solid solutions (2006) (39)
Deformation-induced Anisotropy of Uniaxially Prestrained steel sheets (2017) (39)
Asymmetric rolling of thin AA-5182 sheets: Modelling and experiments (2014) (39)
A novel approach for anisotropic hardening modeling. Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material (2010) (39)
Hole expansion of twinning-induced plasticity steel (2012) (39)
Piecewise linear approximation of nonlinear unloading-reloading behaviors using a multi-surface approach (2017) (38)
Convex polynomial yield functions (2010) (38)
Modelling direction-dependent hardening in magnesium sheet forming simulations (2011) (37)
Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet (2008) (37)
Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and numerical simulations (2017) (37)
Experimental assessment of nonlinear elastic behaviour of dual-phase steels and application to springback prediction (2016) (37)
Constitutive modeling for path-dependent behavior and its influence on twist springback (2017) (36)
A crystal plasticity model for describing the anisotropic hardening behavior of steel sheets during strain-path changes (2018) (36)
Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory (2001) (35)
Correlation between swift effects and tension–compression asymmetry in various polycrystalline materials (2014) (34)
Distortional plasticity framework with application to advanced high strength steel (2020) (34)
Balanced Biaxial Testing of Advanced High Strength Steels in Warm Conditions (2013) (33)
Prediction of macroscopic anisotropy in rolled aluminum-lithium sheet (1999) (33)
Parameter reduction for the Yld2004-18p yield criterion (2016) (33)
Anisotropy and Formability (2007) (33)
Isotropic to distortional hardening transition in metal plasticity (2015) (33)
Advances in anisotropy of plastic behaviour and formability of sheet metals (2020) (33)
Stress update algorithm for enhanced homogeneous anisotropic hardening model (2015) (33)
A dislocation-based hardening model incorporated into an anisotropic hardening approach (2013) (32)
A general linear method to evaluate the hardening behaviour of metals at large strain with full‐field measurements (2018) (32)
Investigation of plastic strain rate under strain path changes in dual-phase steel using microstructure-based modeling (2017) (32)
Experimental analysis of aluminum yield surface for binary AlMg alloy sheet samples (1998) (32)
Earing in cup drawing face-centered cubic single crystals and polycrystals (1991) (31)
On twist springback prediction of asymmetric tube in rotary draw bending with different constitutive models (2014) (31)
Transformation kinetics and density models of quenching and partitioning (Q&P) steels (2016) (30)
Measurements of anisotropic yielding, bauschinger and transient behavior of automotive dual-phase steel sheets (2003) (30)
Observations on the Nonlinear Unloading Behavior of Advanced High Strength Steels (2014) (30)
Inverse identification strategies for the characterization of transformation-based anisotropic plasticity models with the non-linear VFM (2020) (29)
A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion (2015) (29)
Constitutive modelling of high strength titanium alloy Ti-6Al-4 V for sheet forming applications at room temperature (2016) (29)
Application of the virtual fields method to the identification of the homogeneous anisotropic hardening parameters for advanced high strength steels (2017) (29)
Influence of initial back stress on the earing prediction of drawn cups for planar anisotropic aluminum sheets (1998) (28)
Evaluation of Fracture Micromechanisms in a Fine‐Grained Dual Phase Steel during Uniaxial Tensile Deformation (2014) (28)
General Orthotropic Yield Functions Based on Linear Stress Deviator Transformations (2004) (28)
On the Determination of Flow Stress Using Bulge Test and Mechanical Measurement (2010) (28)
Evaluation of Springback for DP980 S Rail Using Anisotropic Hardening Models (2016) (26)
Evaluation of biaxial flow stress based on elasto-viscoplastic self-consistent analysis of X-ray diffraction measurements (2015) (26)
EBSD Study of Damage Mechanisms in a High-Strength Ferrite-Martensite Dual-Phase Steel (2014) (26)
Experiments and Modeling of Low Carbon Steel Sheet Subjected to Double Strain Path Changes (2013) (26)
Numerical modeling for accurate prediction of strain localization in hole expansion of a steel sheet (2019) (25)
Frictional Behaviors of a Mild Steel and a TRIP780 Steel Under a Wide Range of Contact Stress and Sliding Speed (2014) (25)
Asymmetric rolling of interstitial free steel sheets: microstructural evolution and mechanical properties (2018) (25)
Effect of Strain Rate, Adiabatic Heating and Phase Transformation Phenomena on the Mechanical Behaviour of Stainless Steel (2008) (25)
Effect of precipitates on plastic anisotropy for polycrystalline aluminum alloys (2000) (25)
Hot Press Forming of Tailor Welded Blank: Experiments and FE Modeling (2012) (25)
A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios (2017) (25)
A study of the Yld2004 yield function and one extension in polynomial form: A new implementation algorithm, modeling range, and earing predictions for aluminum alloy sheets (2011) (24)
A comparative study between elasto-plastic self-consistent crystal plasticity and anisotropic yield function with distortional hardening formulations for sheet metal forming (2020) (24)
On crystallographic texture gradient and its mechanical consequence in rolled aluminum-lithium sheet (1992) (24)
Texture evolution of FCC sheet metals during deep drawing process (2000) (24)
Modeling and simulation of the forming of aluminum sheet alloys (2006) (23)
Modified Kocks–Mecking–Estrin Model to Account Nonlinear Strain Hardening (2018) (23)
Influence of precipitate microstructure on flow and forming properties of an aluminum alloy sheet (1991) (23)
Prediction of yield surfaces of textured sheet metals (1999) (23)
Influence of damage on the plastic instability of sheet metals under complex strain paths (1984) (23)
Properties controlling the bend-assisted fracture of AHSS (2015) (23)
Determining the coefficients of a homogeneous anisotropic hardening model for ultrathin steel sheets (2019) (23)
Multi‐Objective Genetic Algorithm to Optimize Variable Drawbead Geometry for Tailor Welded Blanks Made of Dissimilar Steels (2014) (22)
Description of anisotropic behaviour of AA3103-0 aluminium alloy using two recent yield criteria (2003) (22)
Hole expansion of advanced high strenth steel sheet sample (2010) (22)
Mechanism of the Bauschinger effect in Al-Ge-Si alloys (2017) (21)
Modeling of textures and yield surfaces during recrystallization in IF steel sheets (2001) (21)
Measurement of the strength differential effect of DP980 steel sheet and experimental validation using pure bending test (2018) (21)
Thermomechanical response of a TWIP steel during monotonic and non-monotonic uniaxial loading (2016) (20)
Formability of sheet metal with heterogeneous damage (1985) (20)
Continuous strain path change simulations for sheet metal (2014) (20)
Validation of homogeneous anisotropic hardening model using non-linear strain path experiments (2020) (20)
Determination of Anisotropic Yield Coefficients by a Data-Driven Multiobjective Evolutionary and Genetic Algorithm (2015) (19)
Modeling of forming limit for multilayer sheets based on strain-rate potentials (2015) (19)
Themo-mechanical and microstructural modeling of friction stir welding of 6111-T4 aluminum alloys (2009) (19)
Constitutive Modeling for Metals (2007) (19)
Stress development and shape change during press-hardening process using phase-transformation-based finite element analysis (2015) (19)
Effect of nonlinear multi-axial elasticity and anisotropic plasticity on quasi-static dent properties of automotive steel sheets (2016) (19)
Numerical investigation of the post-necking behavior of aluminum sheets in the presence of geometrical and material inhomogeneities (2016) (18)
New interpretation of monotonic Swift effects: Role of tension–compression asymmetry (2013) (18)
Sheet Metal Forming Simulation for Aluminum Alloy Sheets (2000) (18)
Continuum physics of phase and defect microstructures: bridging the gap between physical metallurgy and plasticity of aluminum alloys (2004) (18)
Microstructural effects on yield surface evolution in cubic metals using the viscoplastic φ-model (2011) (18)
Probing Formability Improvement of Ultra-thin Ferritic Stainless Steel Bipolar Plate of PEMFC in Non-conventional Forming Process (2016) (17)
Identification of nonlinear kinematic hardening constitutive model parameters using the virtual fields method for advanced high strength steels (2016) (17)
Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing (2017) (17)
Void coalescence and fracture behavior of notched and un-notched tensile tested specimens in fine grain dual phase steel (2015) (17)
Advanced constitutive model for repeated stress relaxation accounting for transient mobile dislocation density and internal stress (2019) (17)
Characterizations of Aluminum Alloy Sheet Materials Numisheet 2005 (2005) (17)
On mechanical properties of the superconducting niobium (2006) (17)
Finite Element Modeling of Plane Strain Toughness for 7085 Aluminum Alloy (2009) (17)
A new model for FLD prediction based on advanced constitutive equations (2010) (16)
Numerical procedures for predicting localization in sheet metals using crystal plasticity (2013) (16)
Numerical integration algorithm of updated homogeneous anisotropic hardening model through finite element framework (2020) (16)
A Novel Multi-objective Genetic Algorithms-Based Calculation of Hill’s Coefficients (2014) (16)
On precipitate induced hardening in crystal plasticity: algorithms and simulations (2004) (15)
Application of central composite design for optimization of two-stage forming process using ultra-thin ferritic stainless steel (2016) (15)
Experimental and Numerical Analyses of Hot Stamped Parts with Tailored Properties (2013) (15)
Experimental and theoretical plasticity analyses of steel materials deformed under a nonlinear strain path (2020) (15)
Modelling macroscopic imperfections for the prediction of flow localization and fracture (2003) (15)
A pragmatic approach to accommodate in-plane anisotropy in forming limit diagrams (2014) (14)
Forming limit and fracture mechanism of ferritic stainless steel sheets (2011) (13)
Formability of AHSS under an Attach–Detach Forming Mode (2015) (13)
Springback Reduction in Tailor Welded Blank with High Strength Differential by Using Multi‐Objective Evolutionary and Genetic Algorithms (2015) (13)
Three-dimensional finite-element method simulations of stamping processes for planar anisotropic sheet metals (1997) (13)
Examination and modeling of void growth kinetics in modern high strength dual phase steels during uniaxial tensile deformation (2016) (13)
Fracture characteristics of advanced high strength steels during hole expansion test (2020) (13)
Evaluation of Constitutive Models for Springback Prediction in U‐draw/bending of DP and TRIP Steel Sheets (2011) (13)
A Springback Compensation Strategy and Applications to Bending Cases (2013) (12)
On the fracture characteristics of advanced high strength steels during hydraulic bulge test (2021) (12)
Design optimization of extruded preform for hydroforming processes based on ideal forming design theory (2006) (12)
Constitutive modeling of ferritic stainless steel (2010) (12)
Applications of a recently proposed anisotropic yield function to sheet forming (2007) (12)
Unconstrained springback behavior of Al–Mg–Si sheets for different sitting times (2008) (12)
Thermal effects on the enhanced ductility in non-monotonic uniaxial tension of DP780 steel sheet (2016) (11)
Calibration of a strain path change model for a dual phase steel (2021) (11)
Modeling Plastic Anistropy and Strength Differential Effects in Metallic Materials (2010) (11)
Meso‐Scopic Analysis of Strain Path Change Effect on the Hardening Behavior of Dual‐Phase Steel (2014) (11)
Analysis of Three-Dimensional Distortions of the Piston Rings with Arbitrary Cross-Section (2000) (11)
Failure characteristics of advanced high strength steels at macro and micro scales (2019) (11)
Hole expansion of dual phase steels (2012) (11)
Gripless nanotension test for determination of nano-scale properties (2011) (10)
Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity (2009) (10)
Analytical Approach to Predict Anisotropic Material Properties from Cup Drawings (2008) (10)
Unconditionally Convex Yield Functions for Sheet Metal Forming Based on Linear Stress Deviator Transformation (2012) (10)
New interpretation of cyclic Swift effects (2014) (10)
Modeling axisymmetric flow through a converging channel with an arbitrary yield condition (1999) (10)
Modeling of Plastic Yielding, Anisotropic Flow, and the Bauschinger Effect (2014) (10)
Constitutive Descriptions For Metal Forming Simulations (2007) (10)
Disk Compression Testing and Constitutive Modeling of TWIP Sheet Sample (2008) (9)
Effect of asymmetrical rolling and annealing the mechanical response of an 1050-o sheet (2009) (9)
Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading (2015) (9)
The formability of twinning—Induced plasticity steels predicted on the base of Marciniak-Kuczynski theory (2019) (9)
About the influence of hydrostatic pressure on the yielding and flow of metallic polycrystals (2014) (9)
Plastic anisotropy in precipitation-strengthened aluminium alloys deformed in uniaxial and plane strain deformation (2000) (9)
Identification of Dynamic Flow Stress Curves Using the Virtual Fields Methods: Theoretical Feasibility Analysis (2018) (9)
Stress Relaxation for Formability Improvement (2013) (9)
Influence of Tempering Temperature on Low Cycle Fatigue of High Strength Steel (2014) (8)
A Theoretical Study of the Effect of the Double Strain Path Change on the Forming Limits of Metal Sheet (2013) (8)
A Shear Fracture Criterion to Predict Limit Strains in Sheet Metal Forming (2010) (8)
Parameter identification of the homogeneous anisotropic hardening model using the virtual fields method (2016) (8)
Performance review of various uncoupled fracture criteria for TRIP steel sheet (2021) (8)
Material Modelling and Springback Analysis for Multi-stage Rotary Draw Bending of Thin-walled Tube Using Homogeneous Anisotropic Hardening Model☆ (2014) (8)
Effects of texture gradients on yield loci and forming limit diagrams in various aluminum-lithium sheet alloys (1994) (8)
Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations (2022) (8)
Texture development and hardening characteristics of steel sheets under plane-strain compression (1999) (7)
U-draw Bending of DP780 in Non-conventional Drawing Mode Using Direct-drive Digital Servo-press (2014) (7)
Effect of hydrostatic stress on the strength differential effect in low-carbon steel sheet (2022) (7)
Influence of a Hydrostatic Pressure Shift on the Flow Stress in Sheet Metal (2020) (7)
Influence of Yield Stress Determination in Anisotropic Hardening Model on Springback Prediction in Dual-Phase Steel (2018) (7)
Experimental Verification of the Tension-Compression Asymmetry of the Flow Stresses of a High Strength Steel Sheet (2017) (7)
The Effect of Contact Pressure on Piston Ring Twist (2001) (7)
Advances in Constitutive Modeling of Plasticity for Forming Applications (2016) (6)
Computer simulation of annealing and recovery effects on serrated flow in some Al-Mg alloys (1999) (6)
Hydraulic bulge test for stress-strain curve determination and damage calibration for Ito-Goya model (2014) (6)
A new concept for continuum distortional plasticity (2022) (6)
Analytical prediction of earing for drawn and ironed cups (2008) (6)
Texture and Anisotropy of an Al-Li Alloy (1991) (6)
Characterization of the formability for aluminum alloy and steel sheets (1997) (6)
RECENT ANISOTROPIC YIELD CRITERIA FOR SHEET METALS (2002) (6)
A simplified analysis of the effect of microstructure gradient on the stress relief of aluminum plates and extrusions (2003) (6)
Effect of slide motion on springback in 2-D draw bending for AHSS (2016) (6)
Anisotropic Plasticity and Application to Plane Stress (2020) (5)
Extension of strain–life equation for low‐cycle fatigue of sheet metals using anisotropic yield criteria and distortional hardening model (2014) (5)
Inverse identification of large strain plasticity using the hydraulic bulge-test and full-field measurements (2022) (5)
Design of high strength differential TWB to enhance drawability: FE study and optimization (2014) (5)
Failure of DP and TRIP steel sheets in different deformation modes (2019) (5)
Finite element implementation of hydrostatic pressure-sensitive plasticity and its application to distortional hardening model and sheet metal forming simulations (2022) (5)
Parameter reduction for the Yld2004-18p yield criterion (2015) (5)
Advanced constitutive modeling and application to industrial forming processes (2016) (5)
Evaluation of Anisotropic Yield Functions Characterized by Uniaxial and Biaxial Experiments for Formability of DP590 Sheet Steel (2011) (5)
Mechanical property of magnesium alloy sheet with hardening deterioration at warm temperatures and its application for failure analysis: Part I - property characterization (2016) (5)
Constitutive modelling of ferritic stainless steel sheets (2009) (5)
Anisotropic Yield Conditions in Mathematical Theory of Plasticity (薄板成形シミュレーション進化論特集号) (2016) (5)
Effect of Precipitates on Plastic Anisotropy of Polycrystalline Aluminum Alloys (2000) (5)
Relationship between Material Properties and Local Formability of DP980 Steels (2012) (5)
Calibration of Distortional Plasticity Framework and Application to U-draw Bending Simulations (2020) (5)
Prediction of Earing in Cup Drawing FCC Materials (1991) (5)
Modeling the Effect of Asymmetric Rolling on Mechanical Properties of Al–Mg Alloys (2015) (4)
Forming Limit Curves and Forming Limit Stress Curves for Advanced High Strength Steels (2013) (4)
On the use of stress-based forming limit curve for forming and fracture (2008) (4)
CONSTITUTIVE MODELING FOR SHEET METAL FORMING (2005) (4)
Eckhaus instability – a possible wavelength changing mechanism in the evolution of dislocation patterns (2001) (4)
Study on plastic flow localization prediction using a physically-based hardening model (2011) (4)
A simple hardening rule accounting for time-dependent behavior in Al–Mg–Si alloys (2007) (4)
Yield and strain rate potentials for aluminum alloy sheet forming design (1998) (4)
A novel approach for modeling of anisotropic hardening and non proportional loading paths, application to finite element analysis of deep drawing (2009) (4)
MACROSCOPIC ANISOTROPY IN AA 5019 A SHEETS (4)
The influence of aluminium alloy anisotropic texture on crack-tip plasticity (2004) (4)
PARAMETER IDENTIFICATION OF ADVANCED PLASTIC POTENTIALS AND IMPACT ON PLASTIC ANISOTROPY PREDICTION (2016) (4)
Forming Limit Diagram for 6016-T4 Aluminium Alloy Deformed along Linear and Complex Strain Paths (2002) (4)
Application of crystal plasticity to an austenitic stainless steel (2012) (4)
An analysis of wrinkling initiation and growth of anisotropic sheet in deep drawing process with controlled blank holding force (1999) (4)
Characterization of dynamic hardening behavior at intermediate strain rates using the virtual fields method (2021) (3)
A Semi‐Analytic Model to Predict and Compensate Springback in the 3D Stretch Bending Process (2014) (3)
Effect of Asymmetric Rolling on Plastic Anisotropy of Low Carbon Steels during Simple Shear Tests (2010) (3)
Effect of Rolling Parameters on Surface Strain Variation in Hot Strip Rolling (2017) (3)
Modeling of plastic anisotropy with reduced polycrystalline models. Application to aluminum alloys (2008) (3)
Stability of initial texture components during deep drawing of FCC polycrystals (1998) (3)
Advanced Constitutive Modeling for Application to Sheet Forming (2018) (3)
Finite Element analysis of aluminum tube hydroforming based on non-quadratic yield function (2008) (3)
Fracture assessment in dual phase and transformation-induced plasticity steels during 3-point bending (2020) (3)
Strain path changes in aluminum (2019) (3)
Constitutive Description of Isotropic and Anisotropic Plasticity for Metals (2015) (3)
Transient Negative Strain Hardening during Severe Plastic Deformation of Al-30wt%Zn Alloys (2013) (3)
New Anisotropic Constitutive Models For HCP Sheet Forming Simulations (2004) (3)
Convolute Cut‐Edge Design for a Circular Cup Based on FEM and an Analytical Approach (2007) (3)
On Precipitate-Induced Anisotropy Modeling in Binary Al-Cu Alloys (1996) (3)
Strain-rate sensitivity limit diagrams and plastic instabilities in a 6xxx series aluminum alloy Part I: Analysis of temporal stress–strain serrations (2002) (2)
Validation of homogeneous anisotropic hardening approach based on crystal plasticity (2016) (2)
Microstructural and Crystallographic Aspects of Yield Surface Evolution (2011) (2)
Enhancement in the Modeling of Temperature and Strain Rate‐Dependent Plastic Hardening Behavior of a Sheet Metal (2015) (2)
Transient Stress Relaxation Test to Identify Material Constants in Dislocation Density Model (2022) (2)
Investigation of Elastic Modulus Degradation and Recovery with Time and Baking Process for Deformed Automotive Steel Sheets (2022) (2)
Application of Homogeneous Potentials for the Modeling of the Bauschinger Effects in Ultra Low Carbon Steel (2011) (2)
Evolution of Earing during Drawing and Ironing Processes (2010) (2)
Prediction of Eight Ears in Drawn Cup Based on a New Anisotropic Yield Function (2004) (2)
A microstructure-based model for describing strain softening during compression of Al-30%wt Zn alloy (2013) (2)
Convolute Cut‐Edge Design for an Earless Cup in Cup Drawing (2005) (2)
Evolutionary optimization for conditions of variable BHF for springback reduction in AHSS-mild steel TWB (2013) (2)
A Microstructure-Based Model for Describing Softening Process During Compression of Al-30%wt Zn Alloy (2013) (2)
Plastic Instability in Complex Strain Paths Predicted by Advanced Constitutive Equations (2011) (2)
Prediction of Plastic Properties of Rods From Individual Grain Orientation Measurements (1991) (2)
Comment on “Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion” (2020) (2)
Mechanical behaviour of TWIP steel under shear loading (2016) (2)
Multi-Coefficient Optimization of Homogeneous Anisotropic Hardening Model for Ahss (2019) (2)
Crystal Plasticity Predictions of Forward-Reverse Simple Shear Flow Stress (2011) (2)
Influence of Bainite Morphology on Ductile Fracture Behavior in a 0.4C‐CrMoNi Steel (2015) (2)
A New Anisotropic Yield Criterion for Aluminium Alloys (2002) (2)
NUMIFORM 2010 : proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, dedicated to Professor O.C. Zienkiewicz (1921-2009) : pohang, Republic of Korea, 13-17 June 2010 (2010) (2)
Material Modeling in High Strain Range and Forming Limit Analysis for 6000 Series Aluminum Alloy Sheet (2020) (1)
Design of high strength differential TWB to enhance drawability: FE study and optimization (2014) (1)
Influence of Precipitate Microstructure on Flow and Forming Properties of a 7075 Aluminum Alloy Sheet (1991) (1)
Hardening behavior and texture evolution of TWIP steel during strain path change (2015) (1)
Analytical prediction of earing evolution during drawing and ironing operations (2009) (1)
Optimization of an Anisotropic Blank Shape Based on Ideal Sheet Forming Design Theory and FEM Analysis (1995) (1)
Prediction of plastic flow localization with shell element in thick AHSS sheets (2018) (1)
Modeling of the Mechanical Response During Reversal Shear Loading: Application to Steels (2016) (1)
Texture, Microstructure and Forming of Aluminium Alloy Sheets (2003) (1)
A Review of the Relationship Between Microstructural Features and the Stress‐Strain Behavior of Metals (2005) (1)
Constitutive modeling for analysis and design of aluminum sheet forming processes (2000) (1)
Effect of the determination method of the material parameters on the accuracy of forming limit analyses for 5000 series aluminum alloy (2016) (1)
Strain hardening approximation for aluminum alloy sheet (2006) (1)
Non-circular blank design for an earless target cup based on a new anisotropic yield function (2006) (1)
Bending Formability of Ferritic Stainless Steels for Application to Tubular Exhaust Manifolds (2015) (1)
Predictions of polycrystalline yield surfaces for fcc metals using a new viscoplastic intermediate approach (2009) (1)
Advanced Steel Design by Multi-Scale Modeling (2010) (1)
Anisotropic Yield Functions (2015) (1)
Prediction of Ridging by 3-Dimensional Texture in Ferritic Stainless Steels (2014) (1)
Measurement and Analysis of the Elastic-Plastic Deformation Behavior of an Ultra-thin Austenitic Stainless Steel Sheet Subjected to In-plane Reverse Loading (2017) (1)
Strain path dependent evolution of yield locus based on HAH model description (2014) (1)
Identification of the YLD2000-2D Model with the Virtual Fields Method (2016) (1)
Effect of Stress State and Temperature on the Kinetics of Martensitic Phase Transformation in TRIP-Assisted Steel (2015) (1)
Sheet Forming Simulations of Automotive Parts using Different Yield Functions (2010) (1)
Evaluation of Anisotropic Hardening Models using Two-Step Tension Tests (2012) (1)
Spatially Resolved Texture Analysis of Aluminum-Lithium Sheet (1993) (1)
ORTHOTROPIC STRAIN RATE POTENTIALS USING MULTIPLE LINEAR TRANSFORMATIONS (2019) (1)
Sheet Metal Forming Limit Predictions Based on Advanced Constitutive Equations (2010) (1)
A Modified Split Sleeve For The Cold Expansion Process And Application To 7085 Plate (2007) (1)
Investigation on the exponent of non-quadratic anisotropic yield surface models by crystal plasticity (2010) (1)
A crystal plasticity finite element analysis on the effect of prestrain on springback (2022) (1)
Advanced constitutive modeling of AHSS sheets forapplication to springback prediction after U-draw double stamping process (2016) (1)
Non-circular blank design for an earless target cup based on FEM using a new anisotropic yield function and its comparison with a simplified analytical method (2006) (1)
Plastic anisotropic modeling for sheet forming design applications (1999) (1)
A 3D hybrid membrane/shell method with kinematic hardening to predict the springback of sheet metals (1999) (1)
Constitutive modeling for sheet metal forming simulations (2000) (1)
Strain Hardening Anisotropy of Aluminium Alloys during Complex Loading: Strain Reversal Effects (2002) (1)
Determination of the Forming Limit Diagram of an Ultra-Thin Ferritic Stainless Steel Sheet (2011) (1)
Convolute Cut-Edge Design with a New Anisotropic Yield Function for Earless Target Cup in a Circular Cup Drawing (2006) (1)
Plastic Dual Potential for Metals and Application to Minimum Plastic Work Path Calculations (1991) (1)
THE 8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011) (2011) (1)
Aluminum sheet forming design based on the non-quadratic strain-rate potential SRP98 (1999) (1)
Numerical simulation of the mechanical response during strain path change: Application to Zn alloys (2014) (1)
Characterization of dynamic hardening behavior using acceleration information (2017) (1)
Stress update algorithm based on finite difference method and its application to homogenous anisotropic hardening (HAH) model (2018) (1)
Modeling of yield surface evolution in uniaxial and biaxial loading conditions using a prestrained large scale specimen (2018) (0)
Prediction of part shape and associated material properties in hot-press forming using Unite element analysis (2016) (0)
Simulation of Hot Press Forming using Phase Transformation-based Finite Element Method (2014) (0)
Finite-element prediction of earing using a recent 3-D yield criterion for aluminum (2005) (0)
Earing prediction using a nonquadratic yield function translated to account for the strength differential effect (1999) (0)
In honor of Kwansoo Chung (2014) (0)
ANISOTROPIC VISCOPLASTIC CONSTITUTIVE MODELING FOR METALS AND APPLICATION TO THE TAYLOR IMPACT TEST (2007) (0)
Evaluation of loading-path-dependent constitutive models for springback prediction in martensitic steel forming (2023) (0)
Springback Prediction in U-draw/bending of DP and TRIP Steel Sheet (2011) (0)
Back Matter for Volume 1252 (2010) (0)
Measurement of Biaxial Stress Based on Elasto-Viscoplastic Self-Consistent Analysis of X-ray Diffraction | NIST (2014) (0)
Preform design for thin-walled extruded parts based on ideal forming design theory (2000) (0)
Effect of Constitutive Models on Shear Fracture Prediction (2013) (0)
Crack propagation toward friction stir weld (2007) (0)
Investigation on Formability and Strength Differential in Hot Press Forming of Tailor Welded Blank (2012) (0)
Evaluation of Springback for DP980 S Rail Using Anisotropic Hardening Models (2016) (0)
Analytical Approach to Failure Determination of Advanced High‐Strength Steel in Stretch‐Bending Mode (2020) (0)
Non-Quadratic Anisotropic Strain Rate Potential Defined in Plane Stress State (2011) (0)
Characterization of the Dynamic Strain Hardening Behavior from Full-field Measurements (2016) (0)
Determination of Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method (2014) (0)
Development of one point quadrature shell element for large deformation considering elasto-plastic material modeling (2001) (0)
Orthotropic Yield Criteria for modeling the combined effects of anisotropy and strength differential effects in sheet metals (2007) (0)
Influence of Contact Friction on the Experimental Determination of the Balanced Biaxial Strain-Ratio Using the Disc Compression Test (2014) (0)
Back Matter for Volume 1383 (2011) (0)
Plastic Anisotropy and Formability of Aluminum Alloy Sheets. Numerical simulation of formability for Al-Mg alloys with plastic anisotropy. (1998) (0)
Prediction of Nonlinear Kinematic Hardening Parameters for DP Steels by Crystal Plasticity-Based Micromechanical Analysis (2012) (0)
Determination of the Dynamic Strain Hardening Parameters from Acceleration Fields (2017) (0)
Strain hardening behavior based on the shear test: simulation aspect (2002) (0)
A Plasticity Framework for Forming Applications (2021) (0)
A continuum framework for the treatment of mechano-chemically driven phase transformations with a group / sub-group character (2014) (0)
In memoriam, Professor José Joaquim de Almeida Grácio (2017) (0)
Preform design for hydroforming of extruded parts based on ideal forming design theory (2002) (0)
The formability prediction of twinning–induced plasticity steels (2019) (0)
Simulation of Thermal Distortion in Hot Press Forming with Dissimilar Material TWB (2014) (0)
A suggestion for enhancement in the modeling of temperature and strain rate dependent plastic hardening behavior of Al alloy 3003 (2014) (0)
Simple shear test and modeling for advanced high strength steels (2014) (0)
Development of an experimental technique for the study of thermodiffusion in binary mixtures (2005) (0)
Prediction of the Plastic Strain Ratio Evolution of a Dual-phase Steel (2015) (0)
Dynamic hardening properties identification utilizing acceleration data by the Virtual Fields Method (2020) (0)
Finite element analysis of shear test in aluminium alloys (2000) (0)
PEMFC Bipolar Plate Forming experiments and finite element simulation for Ultra-thin Ferritic Stainless Steel Sheet by Digital Servo-Press (2014) (0)
Finite Element Modeling for Predicting Slab Edge Defect on Hot-Rolled Stainless Steel Sheet (2013) (0)
Evaluation of non-quadratic anisotropic yield function characterized by uni-axial, in-plane bi-axial and plane strain experiments (2010) (0)
Remarks upon the algebraic structure of some recently proposed anisotropic yield functions (2010) (0)
Development of arbitrary crack propagation method for macro and micro applications, multiaxial cyclic plasticity and fatigue crack propagation (2006) (0)
Preface : In International journal of solids and structures, v.49 n.25 (2012) (0)
Jose Joaquim In Memoriam (2018) (0)
Amplitude Equation for a Dynamic Strain Aging Model: Beyond Linear Stability Analysis of Serrated Flow in Metallic Alloys (2000) (0)
Parameter Determination of Anisotropic Yield Criterion (2014) (0)
Warm Forming Experiments and Finite Element Simulation Considering Material Anisotropy for Stainless Steel Sheets (2014) (0)
Micro-mechanical FE Analysis of Dual-phase Steels (2015) (0)
Investigation into deformation-induced anisotropy in extrusion of rectangular al-alloy tubes by finite element method with experimental verification (2002) (0)
Application of the Virtual Fields Method to determine dynamic properties at intermediate strain rates (2018) (0)
In Memoriam (2017) (0)
Hole Expansion Simulations of TWIP Steel Sheet Sample (2010) (0)
The importance of friction coefficient at different forming velocities of AHSS (2013) (0)
FE implementation of HAH model using FDM-based stress update algorithm for springback prediction of AHSS sheets (2018) (0)
Optimization of Split Sleeve Cold Expansion Process for Aerospace Aluminum Alloys (2007) (0)
Microstructure-Based Constitutive Modeling for the Analysis and Design of Aluminium Sheet Forming Processes (2002) (0)
Damage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation (2013) (0)
Front Matter for Volume 1252 (2010) (0)
Non-linear strain path experiment and modeling for very high strength material (2019) (0)
Characterisation of anisotropic plastic behaviour using an inverse method (2015) (0)
Correction to: Transient Stress Relaxation Test to Identify Material Constants in Dislocation Density Model (2022) (0)
Measurement and Analysis of Plane Strain Stree-Strain Curves of Advanced High Strength Steels (2010) (0)
In Memoriam (2017) (0)
Evaluation of Anisotropic Hardening Behavior of AHSS using Simple Shear Test (2013) (0)
Determination of strain rate dependence at intermediate strain rates using acceleration information (2022) (0)
Mechanical property of magnesium alloy sheet with hardening deterioration at warm temperatures and its application for failure analysis: Part I - property characterization (2014) (0)
Twist springback characteristics of dual-phase steel sheet after non-axisymmetric deep drawing (2015) (0)
Study on the Dilatation Change of the Q&P Steel Sheet during Isothermal Process under Martensite Start Temperature (2014) (0)
Influence of Yield Stress Determination in Anisotropic Hardening Model on Springback Prediction in Dual-Phase Steel (2018) (0)
STRAIN RATE POTENTIALS WITH INCREASING ACCURACY FOR SHEET FORMING SIMULATIONS (2008) (0)
Research Trends in Mechanical Engineering 2016: Conference Proceedings (2016) (0)
Reverse-loading coefficients identification for updated homogeneous anisotropic hardening model (2020) (0)
Sheet forming simulations of automotive parts using different constitutive models (2009) (0)
Anisotropic strain-rate potential based on multiple linear transformations (2009) (0)
Effect of slide motion on springback in 2-D draw bending for AHSS (2015) (0)
Parameter identification of the homogeneous anisotropic hardening model using the virtual fields method (2015) (0)
Front Matter for Volume 1383 (2011) (0)
Comment on “Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion” (2020) (0)
On the optimization and accuracy of stress-strain curve determination using hydraulic bulge test (2014) (0)
Stress relaxation and its application on formability (2013) (0)
Non-iterative stress integration method for anisotropic materials (2022) (0)
Balanced Biaxial Testing of Advanced High Strength Steels in Warm Conditions (2013) (0)
Modeling of localization and fracture phenomena in strain and stress space for sheet metal forming (2015) (0)

This paper list is powered by the following services:

Other Resources About Frédéric Barlat

en.wikipedia.org

What Schools Are Affiliated With Frédéric Barlat?

Frédéric Barlat is affiliated with the following schools:

Frédéric Barlat's Academic­Influence.com Rankings

Why Is Frédéric Barlat Influential?

Frédéric Barlat's Published Works

Published Works

Other Resources About Frédéric Barlat

What Schools Are Affiliated With Frédéric Barlat?

Image Attributions

Frédéric Barlat's AcademicInfluence.com Rankings