Fuhui H. Wang

Fuhui H. Wang's AcademicInfluence.com Rankings

Fuhui H. Wang

Engineering

#3093

World Rank

#4118

Historical Rank

Materials Science

#109

World Rank

#111

Historical Rank

engineering Degrees

Download Badge

Engineering

Why Is Fuhui H. Wang Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Fuhui H. Wang's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D (2006) (378)
Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D (2007) (328)
Corrosion of low carbon steel in atmospheric environments of different chloride content (2009) (295)
An investigation of benzimidazole derivative as corrosion inhibitor for mild steel in different concentration HCl solutions (2011) (267)
Corrosion of AZ91D magnesium alloy with a chemical conversion coating and electroless nickel layer (2004) (266)
Electrochemical behavior of anodized Mg alloy AZ91D in chloride containing aqueous solution (2005) (261)
Anaerobic microbiologically influenced corrosion mechanisms interpreted using bioenergetics and bioelectrochemistry: A review (2018) (242)
Study on the environmentally friendly anodizing of AZ91D magnesium alloy (2002) (202)
Experimental and theoretical studies for corrosion inhibition of carbon steel by imidazoline derivative in 5% NaCl saturated Ca(OH)2 solution (2011) (172)
Growth process of plasma electrolytic oxidation films formed on magnesium alloy AZ91D in silicate solution (2007) (166)
Oxidation behaviour of sputter-depositedNi–Cr–Al micro-crystalline coatings (1998) (164)
Electrochemical Corrosion Behavior of Nanocrystalline Materials-a Review (2010) (151)
The effect of nanocrystallization on the selective oxidation and adhesion of Al2O3 scales (1997) (150)
Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy (2008) (148)
The atmospheric corrosion kinetics of low carbon steel in a tropical marine environment (2010) (140)
[BMIM]BF4 ionic liquids as effective inhibitor for carbon steel in alkaline chloride solution (2011) (131)
Designing for the chemical conversion coating with high corrosion resistance and low electrical contact resistance on AZ91D magnesium alloy (2018) (129)
The effect of Cu addition on the electrochemical corrosion and passivation behavior of stainless steels (2010) (129)
A cationic gemini-surfactant as effective inhibitor for mild steel in HCl solutions (2010) (125)
Effect of nano-sized titanium powder addition on corrosion performance of epoxy coatings (2007) (122)
Roles of β phase in the corrosion process of AZ91D magnesium alloy (2006) (120)
Cerium conversion coatings for AZ91D magnesium alloy in ethanol solution and its corrosion resistance (2009) (117)
The characterization and corrosion resistance of cerium chemical conversion coatings for 304 stainless steel (2004) (117)
Influence of phytic acid concentration on performance of phytic acid conversion coatings on the AZ91D magnesium alloy (2008) (116)
Effects of nanocrystallization on the corrosion behavior of 309 stainless steel (2006) (108)
Synergistic effect of iodide ion and polyacrylic acid on corrosion inhibition of iron in H2SO4 investigated by electrochemical techniques (2010) (107)
Effect of Al2O3 and enamel coatings on 900°C oxidation and hot corrosion behaviors of gamma-TiAl (2000) (107)
Understanding corrosion inhibition mechanisms—experimental and theoretical approach (2011) (103)
Investigation on the inhibition behavior of a pentaerythritol glycoside for carbon steel in 3.5% NaCl saturated Ca(OH)2 solution (2012) (101)
Synthesis of porous copper from nanocrystalline two-phase Cu–Zr film by dealloying (2007) (99)
The effect of β-FeOOH on the corrosion behavior of low carbon steel exposed in tropic marine environment (2008) (98)
Effect of MCrAIY overlay coatings on oxidation resistance of TiAl intermetallics (1998) (93)
Influence of grain size on the corrosion behavior of a Ni-based superalloy nanocrystalline coating in NaCl acidic solution (2008) (92)
The influence of the chemically bonded interface between fillers and binder on the failure behaviour of an epoxy coating under marine alternating hydrostatic pressure (2015) (89)
Copper doping in titanium oxide catalyst film prepared by dc reactive magnetron sputtering (2004) (88)
Corrosion behaviors of Zn/Al-Mn alloy composite coatings deposited on magnesium alloy AZ31B (Mg-Al-Zn) (2009) (87)
Grain size effect on the electrochemical corrosion behavior of surface nanocrystallized low-carbon steel (2004) (85)
Influence of argon flow rate on TiO2 photocatalyst film deposited by dc reactive magnetron sputtering (2004) (80)
EIS monitoring study of atmospheric corrosion under variable relative humidity (2010) (79)
The failure behaviour of an epoxy glass flake coating/steel system under marine alternating hydrostatic pressure (2014) (79)
High-temperature oxidation and hot-corrosion behavior of a sputtered NiCrAlY coating with and without aluminizing (2006) (78)
A novel Cu-bearing high-entropy alloy with significant antibacterial behavior against corrosive marine biofilms (2020) (78)
Pitting mechanism on an austenite stainless steel nanocrystalline coating investigated by electrochemical noise and in-situ AFM analysis (2008) (78)
The effects of sulfate reducing bacteria on corrosion of carbon steel Q235 under simulated disbonded coating by using electrochemical impedance spectroscopy (2011) (77)
Electrochemical corrosion behaviour of microcrystalline aluminium in acidic solutions (2007) (76)
Photocatalytic Zn-doped TiO2 films prepared by DC reactive magnetron sputtering (2007) (75)
Corrosion Inhibition of Q235 Mild Steel in 0.5 M H2SO4 Solution by Phytic Acid and Synergistic Iodide Additives (2014) (73)
Endogenous phenazine-1-carboxamide encoding gene PhzH regulated the extracellular electron transfer in biocorrosion of stainless steel by marine Pseudomonas aeruginosa (2018) (71)
Weatherability of 09CuPCrNi steel in a tropical marine environment (2009) (71)
Effect of a sputtered TiAlCr coating on the oxidation resistance of TiAl intermetallic compound (1997) (70)
Effect of microcrystallization on corrosion resistance of AZ91D alloy (2006) (69)
Surface modification of TiO2 film by iron doping using reactive magnetron sputtering (2003) (69)
The oxidation behavior and mechanical performance of Ti60 alloy with enamel coating (2005) (68)
Influence of micro-structure on corrosion behavior of a Ni-based superalloy in 3.5% NaCl (2007) (68)
Preparation and characterization of a novel Si-incorporated ceramic film on pure titanium by plasma electrolytic oxidation (2008) (68)
The effect of coating grain size on the selective oxidation behaviour of Ni-Cr-Al alloy (1997) (68)
Pitting corrosion of 304ss nanocrystalline thin film (2013) (67)
Electrochemical corrosion behavior of nanocrystallized bulk 304 stainless steel (2006) (67)
Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques (2011) (67)
The improvement of the corrosion resistance of 309 stainless steel in the transpassive region by nano-crystallization (2009) (67)
Oxide formation of K38G superalloy and its sputtered micrograined coating (1994) (66)
Active protection of Mg alloy by composite PEO coating loaded with corrosion inhibitors (2020) (66)
Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidation (2020) (65)
Reactive sputter deposition of alumina films on superalloys and their high-temperature corrosion resistance (1995) (64)
Study of the failure mechanism of an epoxy coating system under high hydrostatic pressure (2013) (64)
Stainless steel corrosion via direct iron-to-microbe electron transfer by Geobacter species (2021) (64)
The corrosion behavior of Fe-10Cr nanocrystalline coating (2006) (64)
3D reconstruction of plasma electrolytic oxidation coatings on Mg alloy via synchrotron radiation tomography (2018) (63)
Cerium Chemical Conversion Coating for Aluminum Alloy 2024-T3 and Its Corrosion Resistance (2004) (62)
SiO2–Al2O3–glass composite coating on Ti–6Al–4V alloy: Oxidation and interfacial reaction behavior (2013) (62)
Effect of nano-sized mesoporous silica MCM-41 and MMT on corrosion properties of epoxy coating (2012) (61)
Influence of nanocrystallization on passive behavior of Ni-based superalloy in acidic solutions (2007) (60)
High vacuum arc ion plating NiCrAlY coatings: Microstructure and oxidation behavior (2015) (60)
The failure behaviour of a commercial highly pigmented epoxy coating under marine alternating hydrostatic pressure (2015) (59)
Effect of polyacrylic acid on the corrosion behaviour of aluminium in sulphuric acid solution (2010) (59)
Evaluation of electrodeposited Fe–Ni alloy on ferritic stainless steel solid oxide fuel cell interconnect (2010) (59)
Comparative study of oxidation and interdiffusion behavior of AIP NiCrAlY and sputtered nanocrystalline coatings on a nickel-based single-crystal superalloy (2015) (58)
Effect of a small increase in the Ni content on the properties of a laser surface clad Fe-based alloy (2007) (58)
Controlled synthesis of CuO nanoparticles using TritonX-100-based water-in-oil reverse micelles (2008) (58)
Oxidation of a novel electrodeposited Ni-Al nanocomposite film at 1050 °C (2004) (57)
Role of the LPSO structure in the improvement of corrosion resistance of Mg-Gd-Zn-Zr alloys (2019) (57)
Glass–ceramic coatings on titanium alloys for high temperature oxidation protection: Oxidation kinetics and microstructure (2013) (56)
Self-healing metal-enamel composite coating and its protection for TiAl alloy against oxidation under thermal shock in NaCl solution (2020) (56)
The mechanism of scale adhesion on sputtered microcrystallized CoCrAl films (1996) (56)
Effects of nitrogen partial pressure and pulse bias voltage on (Ti,Al)N coatings by arc ion plating (2003) (55)
Unveiling the inhibition mechanism of an effective inhibitor for AZ91 Mg alloy (2019) (55)
Oxidation and hot corrosion behavior of a novel enamel-Al2O3 composite coating on K38G superalloy (2006) (54)
A novel process for electroless nickel plating on anodized magnesium alloy (2008) (53)
Effect of chromium on the oxidation resistance of TiAl intermetallics (1997) (53)
Effect of a sputtered TiAlCr coating on hot corrosion resistance of gamma-TiAl (1999) (53)
Hot corrosion of arc ion plating NiCrAlY and sputtered nanocrystalline coatings on a nickel-based single-crystal superalloy (2017) (52)
Formation of self-lubricating PEO coating via in-situ incorporation of PTFE particles (2018) (51)
Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment (2019) (51)
The Effect of Surface Finish on the Scaling Behavior of Stainless Steel in Steam and Supercritical Water (2013) (51)
Inhibition performance of a gemini surfactant and its co-adsorption effect with halides on mild steel in 0.25 M H2SO4 solution (2012) (51)
Ascorbic acid as corrosion inhibitor for Q235 mild steel in acidic environments (2015) (50)
The effects of several coatings on cyclic oxidation resistance of TiAl intermetallics (1998) (50)
Ta effect on oxidation of a nickel-based single-crystal superalloy and its sputtered nanocrystalline coating at 900–1100 °C (2015) (50)
Electroless Ni-P plating with a phytic acid pretreatment on AZ91D magnesium alloy (2010) (49)
The Electrochemical Corrosion Behavior of Nanocrystalline 304 Stainless Steel Prepared by Magnetron Sputtering (2012) (49)
Yttrium-doped TiO2 films prepared by means of DC reactive magnetron sputtering (2009) (48)
Glass coatings on stainless steels for high-temperature oxidation protection: Mechanisms (2014) (48)
Laboratory investigation of microbiologically influenced corrosion of 2205 duplex stainless steel by marine Pseudomonas aeruginosa biofilm using electrochemical noise (2018) (48)
Passive behavior of a bulk nanostructured 316L austenitic stainless steel consisting of nanometer-sized grains with embedded nano-twin bundles (2014) (47)
Preparation and oxidation behaviour of nanocrystalline Ni + CrAlYSiN composite coating with AlN diffusion barrier on Ni-based superalloy K417 (2012) (47)
Electroless Ni–P coating preparation of conductive mica powder by a modified activation process (2006) (47)
Synergistic corrosion behavior of coated Ti60 alloys with NaCl deposit in moist air at elevated temperature (2008) (46)
Salvia officinalis extract mitigates the microbiologically influenced corrosion of 304L stainless steel by Pseudomonas aeruginosa biofilm. (2019) (46)
Hot-Corrosion Behavior of TiAl-Base Intermetallics in Molten Salts (1999) (45)
Oxidation resistance of sputtered Ni3(AlCr) nanocrystalline coating (1997) (44)
Effect of microcrystallization on the cyclic oxidation behavior of β-NiAl intermetallics at 1000 °C in air (2001) (44)
Electrodeposition of Al–Mn alloy on AZ31B magnesium alloy in molten salts (2009) (44)
Influence of hydrostatic pressure on the corrosion behavior of 90/10 copper-nickel alloy tube under alternating dry and wet condition (2019) (44)
Dealloying behaviour of Cu–20Zr alloy in hydrochloric acid solution (2006) (44)
Oxidation and electrical behavior of ferritic stainless steel interconnect with Fe–Co–Ni coating by electroplating (2012) (43)
Effect of extremely aggressive environment on the nature of corrosion scales of HP-13Cr stainless steel (2019) (42)
Influence of particle additions on corrosion and wear resistance of plasma electrolytic oxidation coatings on Mg alloy (2018) (42)
Sputtered MnCu metallic coating on ferritic stainless steel for solid oxide fuel cell interconnects application (2017) (42)
Yttria partially stabilised zirconia as diffusion barrier between NiCrAlY and Ni-base single crystal Rene N5 superalloy (2015) (41)
Corrosion Behavior of a Sputtered K38G Nanocrystalline Coating with a Solid NaCl Deposit in Wet Oxygen at 600 to 700°C (2002) (41)
An investigation on the continuous and uniform thin membrane passive film formed on sputtered nanocrystalline stainless steel (2016) (41)
Influence of columnar microstructure of a sputtered NiAl coating on its oxidation behavior at 1000 °C (2002) (41)
Oxidation behaviour of FeAl intermetallic coatings produced by magnetron sputter deposition (1998) (40)
Rehealing ability of oxide scales formed on microcrystalline K38G coatings (1995) (40)
Effect of Hydrostatic Pressure on the Corrosion Behavior of a Low Alloy Steel (2013) (40)
A monolayer PEO coating on 2024 Al alloy by transient self-feedback control mode (2013) (40)
Influences of MCrAlY coatings on oxidation resistance of single crystal superalloy DD98M and their inter-diffusion behaviors (2015) (39)
Significantly improved corrosion resistance of Mg-15Gd-2Zn-0.39Zr alloys: Effect of heat-treatment (2019) (39)
Adsorption and corrosion inhibiting effect of riboflavin on Q235 mild steel corrosion in acidic environments (2015) (39)
Amorphous sol-gel SiO2 film for protection of Ti6Al4V alloy against high temperature oxidation (2007) (39)
Effect of phytic acid on the corrosion inhibition of composite film coated on Mg–Gd–Y alloy (2013) (38)
Electroplated Ni-Fe2O3 composite coating for solid oxide fuel cell interconnect application (2012) (38)
Investigation into the failure mechanism of chromia scale thermally grown on an austenitic stainless steel in pure steam (2016) (37)
Hot corrosion behaviour of a Ni plus CrAlYSiN composite coating in Na2SO4-25 wt.% NaCl melt (2013) (37)
Effect of aging treatment on microstructure and corrosion behavior of a Fe-18Cr-15Mn-0.66N stainless steel (2021) (37)
Influence of nanocrystallization on pitting corrosion behavior of an austenitic stainless steel by stochastic approach and in situ AFM analysis (2010) (37)
Influence of second phase on corrosion performance and formation mechanism of PEO coating on AZ91 Mg alloy (2017) (37)
Improved Oxide Spallation Resistance of Microcrystalline Ni-Cr-Al Coatings (1998) (36)
Grain refinement promotes the formation of phosphate conversion coating on Mg alloy AZ91D with high corrosion resistance and low electrical contact resistance (2021) (36)
Comparison between the oxidation of iron in oxygen and in steam at 650–750 °C (2013) (36)
Effect of sand blasting and glass matrix composite coating on oxidation resistance of a nickel-based superalloy at 1000 °C (2013) (36)
Microbiologically influenced corrosion of 304L stainless steel caused by an alga associated bacterium Halomonas titanicae (2020) (35)
Failure behavior of nano-SiO2 fillers epoxy coating under hydrostatic pressure (2012) (35)
A magnetron sputtered microcrystalline β-NiAl coating for SC superalloys. Part I. Characterization and comparison of isothermal oxidation behavior at 1100 °C with a NiCrAlY coating (2015) (35)
A primary study of the effect of hydrostatic pressure on stress corrosion cracking of Ti-6Al-4V alloy in 3.5% NaCl solution (2020) (35)
Sharing riboflavin as an electron shuttle enhances the corrosivity of a mixed consortium of Shewanella oneidensis and Bacillus licheniformis against 316L stainless steel (2019) (35)
Comparative study of mechanical and wear behavior of Cu/WS2 composites fabricated by spark plasma sintering and hot pressing (2017) (34)
Interaction of Sulfate-Reducing Bacteria and Carbon Steel Q 235 in Biofilm (2011) (34)
Water adsorption on Pd {100} from first principles (2007) (33)
An alternative process for the preparation of Cu-coated mica composite powder (2006) (33)
Benefits of Zr addition to oxidation resistance of a single-phase (Ni,Pt)Al coating at 1373 K (2019) (33)
Diffusion of Ta and its influence on oxidation behavior of nanocrystalline coatings with different Ta, Y and Al contents (2017) (32)
Exploration the inhibition mechanism of sodium dodecyl sulfate on Mg alloy (2020) (32)
High temperature corrosion behavior of an AIP NiCoCrAlY coating modified by aluminizing (2011) (32)
Effect of variations of Al content on microstructure and corrosion resistance of PEO coatings on MgAl alloys (2017) (32)
Influence of surface pretreatment on phosphate conversion coating on AZ91 Mg alloy (2019) (32)
The oxidation behavior of TiAlNb intermetallics with coatings at 800 °C (2005) (32)
Optimizing the electromagnetic wave absorption performance of designed hollow CoFe2O4/CoFe@C microspheres (2021) (32)
A general strategy for the ultrafast surface modification of metals (2016) (32)
The Oxidation and Oxygen Permeation Resistance of Quartz Particle-Reinforced Aluminosilicate Glass Coating on Titanium Alloy (2011) (32)
Modeling the corrosion behavior of Ni-Cr-Mo-V high strength steel in the simulated deep sea environments using design of experiment and artificial neural network (2019) (31)
Preparation and oxidation behavior of SiO2-Al2O3-glass composite coating on Ti-47Al-2Cr-2Nb alloy (2013) (31)
Crystallization Behavior of SiO2–Al2O3–ZnO–CaO Glass System at 1123–1273 K (2010) (31)
The effect of yttrium addition on oxidation of a sputtered nanocrystalline coating with moderate amount of tantalum in composition (2016) (31)
The oxidation behavior of Ti–46.5Al–5Nb at 900 °C (2007) (31)
Oxidation of an austenitic stainless steel with or without alloyed aluminum in O2 + 10% H2O environment at 800 °C (2017) (30)
A magnetron sputtered microcrystalline β-NiAl coating for SC superalloys. Part II. Effects of a NiCrO diffusion barrier on oxidation behavior at 1100 °C (2017) (30)
Room temperature electrocaloric effect on PbZr0.8Ti0.2O3 thin film (2010) (30)
Influence of Sputtered Nanocrystalline Coating on Oxidation and Hot Corrosion of a Nickel-based Superalloy M951 (2014) (29)
Role of β Phase during Microarc Oxidation of Mg Alloy AZ91D and Corrosion Resistance of the Oxidation Coating (2013) (29)
Effects of silicon and multilayer structure of TiAl(Si)N coatings on the oxidation resistance of Ti6Al4V (2013) (29)
High temperature oxidation of NiCrAlY, nanocrystalline and enamel-metal nano-composite coatings under thermal shock (2015) (29)
Sputtered Ni coating on ferritic stainless steel for solid oxide fuel cell interconnect application (2012) (29)
The influence of TiAlN and enamel coatings on the corrosion behavior of Ti6Al4V alloy in the presence of solid NaCl deposit and water vapor at 450 °C (2007) (29)
Microstructure and oxidation behavior of a SiC–Al2O3–glass composite coating on Ti–47Al–2Cr–2Nb alloy (2014) (29)
Cyclic oxidation behaviour of Ti/TiAlN composite multilayer coatings deposited on titanium alloy (2020) (29)
Catechin hydrate as an eco-friendly biocorrosion inhibitor for 304L stainless steel with dual-action antibacterial properties against Pseudomonas aeruginosa biofilm (2019) (28)
The oxidation resistance of a sputtered, microcrystalline TiAl-intermetallic-compound film (1995) (28)
Oxidation behavior of TiAl coated with a fine-grain Co-30Cr-4Al film (1993) (28)
Revisiting the cracking of chemical conversion coating on magnesium alloys (2021) (28)
Investigation of the rotation speed on corrosion behavior of HP-13Cr stainless steel in the extremely aggressive oilfield environment by using the rotating cage test (2018) (28)
Effect of hydrostatic pressure on the galvanic corrosion of 90/10 Cu-Ni alloy coupled to Ti6Al4V alloy (2020) (27)
Improved corrosion behavior of nanocrystalline Cu–20Zr films in HCl solution (2006) (27)
Oxidation behavior of NiCrAlY coatings prepared by arc ion plating using various substrate biases: Effects of chemical composition and thickness of the coatings (2017) (27)
Effect of enamel coating on oxidation and hot corrosion behaviors of Ti-24Al-14Nb-3V alloy (2006) (27)
Pourbaix diagram for HP-13Cr stainless steel in the aggressive oilfield environment characterized by high temperature, high CO2 partial pressure and high salinity (2019) (27)
Oxidation inhibition of γ-TiAl alloy at 900 °C by inorganic silicate composite coatings (2013) (27)
Comparison of the cyclic oxidation behavior of a low expansion Ni + CrAlYSiN nanocomposite and a NiCrAlYSi coating (2014) (26)
Long-Term Photoelectrochemical Cathodic Protection by Co(OH)2-Modified TiO2 on 304 Stainless Steel in Marine Environment (2018) (26)
The effect of yttrium addition on the isothermal oxidation behavior of sputtered K38 nanocrystalline coating at 1273 K in air (2007) (26)
High vacuum arc ion plating TiAl coatings for protecting titanium alloy against oxidation at medium high temperatures (2016) (26)
Effect of vitreous enamel coating on the oxidation behavior of Ti6Al4V and TiAl alloys at high temperatures (2008) (26)
TEM investigation of the oxide scale of Ti–46.5Al–5Nb at 900 °C for 50 h (2007) (26)
Multifunctional superhydrophobic coatings fabricated from basalt scales on a fluorocarbon coating base (2021) (26)
Influence of Temperature on Corrosion Behavior of 2A02 Al Alloy in Marine Atmospheric Environments (2018) (26)
Fe-doped photocatalytic TiO2 film prepared by pulsed dc reactive magnetron sputtering (2003) (26)
High temperature oxidation behavior of a sputtered pure Ni nanocrystalline coating at 700–900 °C (2003) (26)
Formation Mechanism and Corrosion Performance of Phosphate Conversion Coatings on AZ91 and Mg-Gd-Y-Zr Alloy (2018) (25)
Electrochemical polymerization of polyaniline-reduced graphene oxide composite coating on 5083 Al alloy: Role of reduced graphene oxide (2019) (25)
The effect of enamel coating on the oxidation behavior of Ti3Al-based intermetallics at 750 °C in air (2007) (25)
Studies on the corrosion behavior of Fe-20Cr alloy in NaCl solution spray at 600 °C (2018) (25)
Electron transfer mediator PCN secreted by aerobic marine Pseudomonas aeruginosa accelerates microbiologically influenced corrosion of TC4 titanium alloy (2021) (25)
Effect of NiCrAlY platelets inclusion on the mechanical and thermal shock properties of glass matrix composites (2011) (25)
Fabricating antibacterial CoCrCuFeNi high-entropy alloy via selective laser melting and in-situ alloying (2021) (25)
Corrosion mechanism of an Al–BN abradable seal coating system in chloride solution (2014) (25)
Effect of PEO Coating Microstructure on Corrosion of Al 2024 (2012) (25)
Effect of phosphate-based sealing treatment on the corrosion performance of a PEO coated AZ91D mg alloy (2020) (25)
Synergetic effect of graphene and Co(OH)2 as cocatalysts of TiO2 nanotubes for enhanced photogenerated cathodic protection (2020) (25)
Understanding of failure mechanisms of the oxide scales formed on nanocrystalline coatings with different Al content during cyclic oxidation (2020) (25)
The scaling behavior of sputtered Ni3Al coatings with and without Pt modification (2012) (25)
Studies on Mathematical Models of Wet Adhesion and Lifetime Prediction of Organic Coating/Steel by Grey System Theory (2017) (24)
Effects of incorporation of Si or Hf on the microstructure and mechanical properties of Ti-Al-N films prepared by arc ion plating (AIP) (2008) (24)
Electrochemical impedance spectroscopy (EIS) studies of the corrosion of pure Fe and Cr at 600 °C under solid NaCl deposit in water vapor (2006) (24)
High vacuum arc ion plating NiCrAlY coatings: Bias effect and approach to preparation of functional gradient coatings (2015) (24)
Corrosion behavior of hot-pressed nanocrystalline NdFeB magnet in a simulated marine atmosphere (2014) (24)
Influence of post-treatment process on corrosion and wear properties of PEO coatings on AM50 Mg alloy (2021) (24)
Effects of Si content on microstructure and mechanical properties of TiAlN/Si3N4-Cu nanocomposite coatings (2014) (24)
Effects Ti/TiAlN composite multilayer coatings on corrosion resistance of titanium alloy in solid NaCl-H 2 O-O 2 at 600 °C (2018) (24)
Improvement on the corrosion resistance of AZ91D magnesium alloy by aluminum diffusion coating (2009) (24)
Hot corrosion behaviour of single-phase platinum-modified aluminide coatings: Effect of Pt content and pre-oxidation (2017) (24)
FeCoNi converting coating for solid oxide fuel cell steel interconnect application (2019) (24)
Preparation and thermal shock behavior at 1000 °C of a glass-alumina-NiCrAlY tri-composite coating on K38G superalloy (2012) (24)
Marine Biofilms with Significant Corrosion Inhibition Performance by Secreting Extracellular Polymeric Substances. (2021) (23)
A self-healing coating based on facile pH-responsive nanocontainers for corrosion protection of magnesium alloy (2020) (23)
Electrochemical behavior of steel A36 under disbonded coating in the presence of sulfate-reducing bacteria (2013) (23)
Development of an oxidation resistant glass-ceramic composite coating on Ti-47Al-2Cr-2Nb alloy (2014) (23)
Application of sputtered NiFe2 alloy coating for SOFC interconnect steel (2018) (23)
Formation kinetics of multi-layered interfacial zone between γ-TiAl and glass–ceramic coatings via interfacial reactions at 1000 °C (2015) (23)
Cyclic Oxidation and Hot Corrosion Behavior of Y/Cr-Modified Aluminide Coatings Prepared by a Hybrid Slurry/Pack Cementation Process (2011) (23)
High-Temperature Oxidation Behavior of Sputtered IN 738 Nanocrystalline Coating (2002) (22)
Oxidation and Thermal Shock Behavior of a Glass-Alumina Composite Coating on K38G Superalloy at 1000 °C (2012) (22)
Improving oxidation resistance of γ-TiAl based alloy by depositing TiAlSiN coating: Effects of silicon (2021) (22)
CuFe2O4 protective and electrically conductive coating thermally converted from sputtered CuFe alloy layer on SUS 430 stainless steel interconnect (2019) (22)
Study on the effect of mischmetal (La,Ce) on the micro-galvanic corrosion of AZ91 alloy using multiscale methods (2019) (22)
Lifetime prediction for organic coating under alternating hydrostatic pressure by artificial neural network (2017) (22)
Optimizing the electromagnetic wave absorption performances of designed Fe3O4@SiO2@MnO2 hybrids (2020) (22)
Corrosion Behavior of Ti60 Alloy under a Solid NaCl Deposit in Wet Oxygen Flow at 600 °C (2016) (22)
Facile synthesis of hierarchically porous rGO/MnZn ferrite composites for enhanced microwave absorption performance (2020) (21)
Synergistic effect of chloride ion and Shewanella algae accelerates the corrosion of Ti-6Al-4V alloy (2021) (21)
Effect of Hf addition in (Ni,Pt)Al bond coat on thermal cycling behavior of a thermal barrier coating system at 1100 °C (2020) (21)
Effect of sand blasting on oxidation behavior of K38G superalloy at 1000 °C (2015) (21)
Thermophysical Properties of Alumina Particle Reinforced Glass Matrix Composites (2013) (20)
Strengthening mechanisms and fracture surface characteristics of silicate glass matrix composites with inclusion of alumina particles of different particle sizes (2013) (20)
Modification of NiCoCrAlY with Pt: Part II. Application in TBC with pure metastable tetragonal (t′) phase YSZ and thermal cycling behavior (2019) (20)
Investigation on the Enhanced Oxidation of Ferritic/Martensitic Steel P92 in Pure Steam (2014) (20)
Study on the mechanism of hydrostatic pressure promoting electrochemical corrosion of pure iron in 3.5% NaCl solution (2021) (20)
Comparative study of interfacial reaction between superalloy substrate and glass coating with and without alumina particles incorporation (2013) (20)
New design principles for the bath towards chromate- and crack-free conversion coatings on magnesium alloys (2020) (20)
Studies on corrosion behavior of a single-crystal superalloy and its sputtered nanocrystalline coatings with solid NaCl deposit in O2 + 38 vol.% H2O environment at 700 °C (2019) (20)
The effect of micro-structure on the oxidation behavior of a Ni-based superalloy in water vapor plus oxygen (2008) (19)
Oxidation and H2O/NaCl-induced corrosion behavior of sputtered Ni–Si coatings on Ti6Al4V at 600–650 °C (2007) (19)
Failure behaviour of an epoxy coating with polyaniline modified graphene oxide under marine alternating hydrostatic pressure (2019) (19)
Spontaneous reaction formation of Cr23C6 diffusion barrier layer between nanocrystalline MCrAlY coating and Ni-base superalloy at high temperature (2015) (19)
Direct observation of thin membrane passive film over the growing pit on sputtered nanocrystalline austenitic stainless steel film (2015) (19)
Influence of cerium on passivity behavior of wrought AZ91 alloy (2008) (19)
Effect of borate coating on oxidation resistance of γ-TiAl intermetallic compound (2000) (19)
A new nanoparticle penetrant used for plasma electrolytic oxidation film coated on AZ31 Mg alloy in service environment (2012) (19)
Effect of ultrasonic agitation during the activation process on the microstructure and corrosion resistance of electroless Ni-W-P coatings on AZ91D magnesium alloy (2019) (19)
Microstructure and oxidation behavior of a Ni+CrAlYSiHfN/AlN multilayer coating fabricated by reactive magnetron sputtering (2016) (19)
Glass–alumina composite coatings for high temperature corrosion protection. Part I: Effect of crystallization and interfacial reaction on the thermo-physical properties (2011) (18)
Oxidation Resistance of TiAl Improved by CoCrAl and CoCrAlY Coating (1993) (18)
Experimental testing and numerical simulation to analyze the corrosion failures of single well pipelines in Tahe oilfield (2017) (18)
Cyclic oxidation behavior of glass–ceramic composite coatings on superalloy K38G at 1100 °C (2011) (18)
Studies on electrochemical noise analysis of an epoxy coating/metal system under marine alternating hydrostatic pressure by pattern recognition method (2017) (18)
Effect of nanocrystallization on the corrosion resistance of K38G superalloy in CO + CO2 atmospheres (1997) (18)
Interfacial reaction between SiO2–Al2O3–ZnO–CaO based glass coatings and K38G superalloy substrates (2013) (18)
Effect of streaming water vapor on the corrosion behavior of Ti60 alloy under a solid NaCl deposit in water vapor at 600 °C (2019) (18)
Effects of N-alkylation on anticorrosion performance of doped polyaniline/epoxy coating (2020) (18)
The effect of hot extrusion on the microstructure and anti-corrosion performance of LDHs conversion coating on AZ91D magnesium alloy (2019) (18)
High temperature oxidation and corrosion behaviours of Ni–Fe–Cr alloys as inert anode for aluminum electrolysis (2019) (18)
Bridge for the thermodynamics and kinetics of electrochemical corrosion: Modeling on dissolution, ionization, diffusion and deposition in metal/solution interface (2021) (18)
Protective Performance of Polyaniline-Sulfosalicylic Acid/Epoxy Coating for 5083 Aluminum (2018) (17)
Improved corrosion performance of selective laser melted stainless steel 316L in deep sea environment (2021) (17)
Fabrication of low-cost Ni-P composite coating on Mg alloys with a significant improvement of corrosion resistance: Critical role of mitigating the galvanic contact between the substrate and the coating (2021) (17)
Molecular dynamics simulation of C20 fullerene (1999) (17)
A duplex nanocrystalline coating for high-temperature applications on single-crystal superalloy (2016) (17)
Effective of Ta, Ti and TiN barriers on diffusion and oxidation kinetics of sputtered CoCrAlY coatings (1992) (17)
Cyclic oxidation resistance of CoCrAl alloys and their sputtered microcrystalline coatings with and without yttrium (1992) (17)
Oxidation behavior of a nanocrystalline coating with low Ta content at high temperature (2020) (17)
Mechanical Properties and Oxidation Behavior of a Graded (Ti,Al)N Coating Deposited by Arc-Ion Plating (2006) (17)
Methanogenic archaea and sulfate reducing bacteria induce severe corrosion of steel pipelines after hydrostatic testing (2020) (17)
Effect of the Cu Content on the Microstructure and Corrosion Behavior of PEO Coatings on Al–xCu Alloys (2018) (17)
Effect of niobium on the oxidation behavior of TiAl (2007) (17)
Investigation of microbial corrosion inhibition of Cu-bearing 316L stainless steel in the presence of acid producing bacterium Acidithiobacillus caldus SM-1 (2020) (16)
Corrosion of enamel with and without CaF2 in molten aluminum at 750 °C (2019) (16)
Characterization and Oxidation Behavior of a Sputtered Nanocomposite Ni+CrAlYSiHfN Coating (2015) (16)
Morphology-controlled CoNi/C hybrids with bifunctions of efficient anti-corrosion and microwave absorption (2021) (16)
Influence of SiO2 Particles on the Corrosion and Wear Resistance of Plasma Electrolytic Oxidation-Coated AM50 Mg Alloy (2018) (16)
Cu-bearing high-entropy alloys with excellent antiviral properties (2021) (16)
Nano-crystalline coating to improve cyclic oxidation resistance of 304 stainless steel (2013) (16)
Effects of surface finish of single crystal superalloy substrate on cyclic thermal oxidation of its nanocrystalline coating (2016) (16)
Morphology controlled synthesis of Co(OH)2/TiO2 p-n heterojunction photoelectrodes for efficient photocathodic protection of 304 stainless steel (2021) (16)
Protection mechanism of enamel–alumina composite coatings on a Cr-rich nickel-based superalloy against high-temperature oxidation (2016) (16)
Inhibiting corrosion of aluminum alloy 5083 through Vibrio species biofilm (2021) (16)
High-entropy FeNiCoCr alloys with improved mechanical and tribological properties by tailoring composition and controlling oxidation (2021) (15)
Cross-sectional oxide distribution of cast IN738 and its sputtered coating at 1000 °C (2003) (15)
The role of hydrostatic pressure on the metal corrosion in simulated deep-sea environments — a review (2021) (15)
The High Temperature Oxidation Behavior of Mg–Gd–Y–Zr Alloy (2009) (15)
Fabrication of Ag containing antibacterial PEO coatings on pure Mg (2021) (15)
Nanocrystalline coatings on superalloys against high temperature oxidation: A review (2021) (15)
Improving high-temperature oxidation resistance of TiAl-based alloys by MnCl2 surface treatment (2003) (15)
Preparation and thermal shock performance of thick α-Ta coatings by direct current magnetron sputtering (DCMS) (2017) (15)
Enhancement of the electrochemical behavior for Cu-70Zr alloy by grain refinement (2006) (15)
Oxidation behavior of Al/Y co-modified nanocrystalline coatings with different Al content on a nickel-based single-crystal superalloy (2020) (15)
TEM study of the evolution of sputtered Ni+CrAlYSiHfN nanocomposite coating with an AlN diffusion barrier at high temperature (2016) (14)
Influence of composition on corrosion behavior of as-cast Cu–Zr alloys in HCl solution (2006) (14)
Electronic structures and shape-memory behavior of Ti50Ni50-xCux (x = 0, 6.25, 12.5, 18.75 and 25.0 at%) by density functional theory (2007) (14)
Influence of preoxidation on high temperature behavior of NiFe2 coated SOFC interconnect steel (2019) (14)
Superhydrophobic composite coatings in bacterial culture media: Durable antibacterial activity and enhanced corrosion resistance (2021) (14)
Simulating sulfuric acid dew point corrosion of enamels with different contents of silica (2017) (14)
Interfacial reactions between a SiO2Al2O3ZnOCaO based glass and alpha alumina (2013) (14)
Cyclic oxidation behavior of a multilayer composite coating for single-crystal superalloys (2018) (14)
2D organic-α-Co(OH)2 material and derived Co/C composites with bifunctions of anti-corrosion and microwave absorption (2021) (14)
Thermal control property and corrosion resistance of PEO coatings on AZ91 Mg alloy (2020) (14)
Beneficial effects of Co(2+) on co-electrodeposited Ni-SiC nanocomposite coating (2009) (13)
Microstructural stability of AlN diffusion barrier for nanocomposite Ni + CrAlYSiHfN coating on single crystal superalloy at high temperatures (2015) (13)
Variations of Microenvironments with and without SRB for Steel Q 235 under a Simulated Disbonded Coating (2013) (13)
Growth of single corrosion pit in sputtered nanocrystalline stainless steel film (2016) (13)
High-temperature corrosion behavior of sputtered K38 nanocrystalline coatings with and without yttrium addition in molten sulfate at 900 °C (2011) (13)
Observations of anomalies in the anodic behaviour of microcrystalline aluminium (2010) (13)
Studies on corrosion resistance of thick Ti/TiN multilayer coatings under solid NaCl–H2O–O2 at 450 oC (2020) (13)
Effect of Nanocrystallization on Sulfur Segregation in Fe–Cr–Al Alloy during Oxidation at 1000°C (2006) (13)
Ru-induced microstructural change in ion-plated TiN coating and its tribological properties (2018) (13)
Simulations of reactive sputtering with constant voltage power supply (1998) (13)
Phase Evolution of SiO2-Al2O3-ZnO-CaO-ZrO2-TiO2-Based Glass with Added Y-PSZ Particles (2013) (13)
Sputtered nanocrystalline coating of a low-Cr alloy for solid oxide fuel cell interconnects application (2013) (12)
Oxide film formed on Al alloy beneath sulfosalicylic acid doped polyaniline incorporated into epoxy organic coating (2020) (12)
Corrosion Behavior of Pure Ti under a Solid NaCl Deposit in a Wet Oxygen Flow at 600 °C (2016) (12)
Stoichiometry and tribological behavior of thick Ta(N) coatings produced by direct current magnetron sputtering (DCMS) (2018) (12)
Investigation of the failure mechanism of the TG-201 inhibitor: Promoting the synergistic effect of HP-13Cr stainless steel during the well completion (2020) (12)
Good sensitivity and high stability of humidity sensor using micro-arc oxidation alumina film (2013) (12)
The Electrochemical Corrosion Mechanisms of Pure Cr with NaCl Deposit in Water Vapor at 600 degrees C (2011) (12)
Micro‐alloys precipitation in NiO‐ and CoO‐bearing enamel coatings and their effect on adherence of enamel/steel (2018) (12)
Evidence for the occurrence of electrochemical reactions and their interaction with chemical reactions during the corrosion of pure Fe with solid NaCl deposit in water vapor at 600 °C (2010) (12)
Marine Vibrio spp. protect carbon steel against corrosion through secreting extracellular polymeric substances (2022) (12)
Regulating discharge performance of Mg anode in primary Mg-air battery by complexing agents (2021) (12)
Growth kinetics of metastable pits on sputtered nanocrystalline stainless steel (2017) (12)
Co-doping effect of Hf and Y on improving cyclic oxidation behavior of (Ni,Pt)Al coating at 1150 °C (2021) (12)
Study of Barrier Property of Composite Film Coated on Mg-Gd-Y Alloy by Water Diffusion (2013) (12)
Microstructure and corrosion resistance of the PEO coating on extruded Al6Cu alloy (2019) (12)
Electrochemical behaviour of microcrystalline aluminium in neutral fluoride containing solutions (2009) (11)
Effect of surface tension on electrocaloric effects in the ferroelectric nanomaterial with vortex domain structures (2013) (11)
Effect of pre-oxidation on surface scale microstructure and electrical property of Cu-Fe coated steel interconnect (2020) (11)
Microstructure of Oxide Scales Formed on Ti--48Al--8Cr--2Ag Alloy in Air at 900--1000°C (2005) (11)
Enhanced oxidation and corrosion inhibition of 1Cr11Ni2W2MoV stainless steel by nano-modified silicone-based composite coatings at 600°C (2020) (11)
Synergistic effect of corrosion and wear of the 316 stainless steel in molten zinc alloy at 460 °C (2020) (11)
Microstructure and cavitation erosion behavior of sputtered NiCrAlTi coatings with and without N incorporations (2020) (11)
High temperature oxidation and interdiffusion behavior of recoated NiCoCrAlY coating on a nickel-based superalloy (2020) (11)
Corrosion protection properties of an environmentally friendly polyvinyl alcohol coating reinforced by a heating treatment and lignin nanocellulose (2021) (11)
Microstructure stabilization of a novel glass/YSZ composite coating material by adding alumina particles (2015) (11)
Finite element analysis of the water diffusion behaviour in pigmented epoxy coatings under alternating hydrostatic pressure (2018) (11)
The Effect of Hf on the Oxidation and Corrosion Behavior of Ti0.7Al0.3N Coating Prepared by Arc-Ion Plating (2009) (11)
Incorporation of LDH nanocontainers into plasma electrolytic oxidation coatings on Mg alloy (2021) (10)
CoPi/Co(OH)2 Modified Ta3N5 as New Photocatalyst for Photoelectrochemical Cathodic Protection of 304 Stainless Steel (2019) (10)
Chemically depleting the noble impurities from AZ91-T4 magnesium alloy: A new and efficient pretreatment method to improve the corrosion resistance of phosphate conversion coatings (2021) (10)
Effect of Al content on the electrochemical properties of Mg2−xAlxNi thin film hydride electrodes (2009) (10)
Isothermal oxidation behavior and microstructure change of a gradient low-expansion coating for superalloys (2019) (10)
Low inter-diffusivity γ'-base bondcoats for single crystal superalloy René N5. I: Primary study of microstructures and oxidation behaviors at 1100 ºC (2019) (10)
Corrosion failure analysis of the 45-degree elbow in a natural gas gathering pipeline by experimental and numerical simulation (2020) (10)
Evaluation of coating resistivity for pigmented/unpigmented epoxy coatings under marine alternating hydrostatic pressure (2021) (10)
Thermal conversion and evolution behavior of surface scale on SOFC interconnect steel with sputtered FeCoNi coating (2020) (10)
The Corrosion Behavior of Pure Iron under Solid Na2SO4 Deposit in Wet Oxygen Flow at 500 °C (2014) (10)
Effect of coatings on oxidation resistance and mechanical performance of Ti60 alloy (1998) (9)
Influence of cyclic frequency on oxidation behavior of K38 superalloy with yttrium additions at 1 273 K (2011) (9)
Modeling of Pitting Corrosion Damage Based on Electrochemical and Statistical Methods (2019) (9)
Modeling of the Critical Pitting Temperature between the Laboratory-Scale Specimen and the Large-Scale Specimen (2018) (9)
Erosion–corrosion in a laboratory-scale coal-firing FBC of various aluminized coatings prepared by low-temperature pack cementation (2011) (9)
Electronic Structure of Monomeric Water Adsorption on Ni{111}: Beyond the General Model (2008) (9)
Corrosion behaviour of iron and nickel aluminide coatings under the synergistic effect of NaCl and water vapour (2021) (9)
Ni/NiFe2 dual-layer coating for SOFC steel interconnects application (2020) (9)
On the rumpling mechanism in nanocrystalline coatings: improved by reactive magnetron sputtering with oxygen (2022) (9)
Influence of Rare Earth Element (Y) on Microstructure and Corrosion Behavior of Hot Extrusion AZ91 Magnesium Alloy (2020) (9)
Crystallization and Wear Behavior of SiO2-Al2O3-ZrO2-Ba(Sr, Ca)O Glass-Ceramics Added with Cr2O3 By Different Methods (2019) (9)
Unveiling the effect of hydrostatic pressure on the passive films of the deformed titanium alloy (2021) (9)
Application of a composite electrolyte in a solid-acid fuel cell system: A micro-arc oxidation alumina support filled with CsH2PO4 (2013) (9)
Influence of temperature and hydrostatic pressure on the galvanic corrosion between 90/10 Cu–Ni and AISI 316L stainless steel (2021) (9)
Electrophoretic deposition of trimanganese tetraoxide coatings on Ni-coated SUS 430 steel interconnect (2019) (9)
Modification of graphene and graphene oxide and their applications in anticorrosive coatings (2021) (9)
Oxidation behavior of the compound Ti-Al-Si-N/1Cr11Ni2W2MoV at 800 degrees C for 1000 h in air (2013) (9)
A novel design of electrochemical noise configuration based on embedded-electrodes for in-situ evaluation of epoxy coating under marine alternating hydrostatic pressure (2019) (9)
Oxidation of duplex coatings with different thickness ratio of the inner nanocrystalline layer to the outer NiCrAlY one (2018) (9)
Inhibitory Action of Funtumia elastica Extracts on the Corrosion of Q235 Mild Steel in Hydrochloric Acid Medium: Experimental and Theoretical Studies (2015) (9)
Ca-based sealing of plasma electrolytic oxidation coatings on AZ91 Mg alloy (2021) (9)
Critical role of pretreatment on the corrosion resistance of Zr conversion coating on 6061 aluminum alloy: The combined effect of surface topography and potential difference between different phases (2019) (9)
Enhanced electromagnetic wave absorption of hybrid-architectures Co@ SiOxC (2020) (9)
Oxidation behavior of glass-based composite thermal barrier coating on K417G superalloy with a NiCoCrAlY bond coat at 1000 °C (2015) (9)
Microstructural evolution and corrosion behavior of Ti–6Al–4V alloy fabricated by laser metal deposition for dental applications (2021) (9)
Corrosion behavior and porous structure formation of sputtered Cu-Zr nanostructured films (2008) (9)
Comparing the hot corrosion of (100), (210) and (110) Ni-based superalloys exposed to the mixed salt of Na2SO4-NaCl at 750 °C: Experimental study and first-principles calculation (2022) (9)
Fatigue behavior of (graded) (Ti, Al)N-coated 1Cr11Ni2W2MoV stainless steel at high temperature (2010) (8)
Effect of nanocrystallization on hot corrosion resistance of Ti-48Al-8Cr-2Ag alloy in molten salts (2006) (8)
Microstructural evolution, corrosion behavior and cytotoxicity of Ti-6Al-4V/ZrO2 composite fabricated by directed energy deposition for implant biomaterial (2022) (8)
Electrochemical impedance spectroscope analysis of microwave absorbing coatings on magnesium alloy in 3.5 wt.% NaCl solution (2013) (8)
Oxidation mechanism of a nanocrystalline NiCrAlYSiHfN/AlN multilayer coating (2019) (8)
Formation Process of an LDHs Coating on Magnesium Alloy by a CO2 Pressurization Method (2019) (8)
Effect of YSZ-incorporated glass-based composite coating on oxidation behavior of K438G superalloy at 1000 °C (2017) (8)
Effect of nitrogen content on the phase transformation of alumina scale on a nanocrystalline NiCrAlYSiHfN/AlN multilayer coating (2020) (8)
Ultrasonic study of the charge-stripe phase in La1.88-yNdySr0.12CuO4 (2005) (8)
Effect of columnar nano-grain structure on the oxidation behavior of low-Cr Fe–Co–Ni base alloy in air at 800 °C (2012) (8)
Protective performance of epoxy resin modified with coal tar coating studied by electrochemical impedance spectroscopy (2005) (8)
Oxidation mechanism of Ni+CrAlYNO nanocomposite coating enhanced by a NiCrAlY buffer layer (2020) (8)
Streptococcus mutans biofilms induce metabolite-mediated corrosion of 316 L stainless steel in a simulated oral environment (2021) (8)
On the Development and the Oxidation of Novel Ni-Cr and Ni-Al Nanocoatings by Composite Electrodeposition (2004) (8)
Influence of ZnO on thermal control property and corrosion resistance of plasma electrolytic oxidation coatings on Mg alloy (2021) (8)
Abnormal steady states in reactive sputtering (1999) (8)
Influence of Al Content on the Atmospheric Corrosion Behaviour of Magnesium-Aluminum Alloys (2009) (8)
Heterostructured NiCr matrix composites with high strength and wear resistance (2022) (8)
Temporary enamel coatings for oxidation protection of Ti–6Al–4V at its hot working temperature of 1200 °C (2020) (8)
Insight into the stress corrosion cracking of HP-13Cr stainless steel in the aggressive geothermal environment (2021) (8)
Etched basalt scales wrapped in self-assembled poly (urea-formaldehyde) for robust anticorrosive coatings (2021) (7)
Electrochemical corrosion behavior of novel Cu-containing antimicrobial austenitic and ferritic stainless steels in chloride media (2010) (7)
Symmetry-mediated H2O diffusion on Al{100} (2006) (7)
On the exclusive growth of external chromia scale on the novel electrodeposited Cu–Ni–Cr nanocomposites (2007) (7)
Studies on different oxidation behaviors of TiAlN on titanium alloy and stainless steel under thermal cycling (2021) (7)
Low inter-diffusivity γ'-base bondcoats for single crystal superalloy René N5. Ⅱ: Cyclic oxidation behavior at 1100 ºC (2019) (7)
Corrosion of SiO2–B2O3–Al2O3–CaF2-R2O (R=Na and K) enamels with different content of ZrO2 in H2SO4 and NaOH solutions (2019) (7)
An easy-processing organic-inorganic self-lubricating composite coating with high corrosion resistance (2019) (7)
Improved oxidation resistance of γ-TiAl intermetallics by sputtered Ni+CrAlYHfSiN composite coating (2021) (7)
Mechanical properties, corrosion behavior and cytotoxicity of Ti-6Al-4V alloy fabricated by laser metal deposition (2021) (7)
Hot Corrosion Behavior of a Novel Enamel-Based Thermal Barrier Coating (2010) (7)
High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects (2022) (7)
Water Uptake of a Sandwich-Structured Composite Film Coated on a Mg-Gd-Y Alloy: Experiments and Model Validation (2014) (7)
The Effect of the Modification of Mica by High-Temperature Mechanochemistry on the Anticorrosion Performance of Epoxy Coatings (2021) (7)
Bonding Nature of Monomeric H2O on Pd: Orbital Cooperation and Competition (2009) (7)
Investigation of the Role of Silicon in TiAlSiN Coating Deposited on TiAl Alloys during Long-term Oxidation (2022) (7)
Synthesis of advanced aluminide intermetallic coatings by low-energy Al-ion radiation (2016) (7)
Gradient thermal cycling behavior of a thermal barrier coating system constituted by NiCoCrAlY bond coat and pure metastable tetragonal nano-4YSZ top coat (2019) (7)
Oxidation Resistance of Magnetron Sputter Deposited ß-FeAl+Zr Coatings (2000) (7)
Oxidation behavior of a glass-based composite coating with a low expansion cermet bond-coat and an AlN diffusion barrier on K417G superalloy (2018) (7)
Enamel coating for protection of the 316 stainless steel against tribo-corrosion in molten zinc alloy at 460 °C (2021) (7)
Superior high-rate capability of hierarchically structured flower-like magnetite–carbon–graphene composite for Li-ion anode (2015) (6)
Effect of a NiAl Coating on the Oxidation Resistance of a NiAl–TiC Composite (2001) (6)
Tailored design of p-phenylenediamine functionalized graphene decorated with cobalt ferrite for microwave absorption (2020) (6)
Finite element analysis of effect of interfacial bubbles on performance of epoxy coatings under alternating hydrostatic pressure (2019) (6)
Enhancement of the Protectiveness of Epoxy Coatings with Surface-Modified Nano-Titanium Particles (2006) (6)
Design of New Al Photoanode Composite for Cathodic Protection Based on Photocatalytic Material and Sacrificial Anode (2019) (6)
Influence of SiO 2 Particles on the Corrosion and Wear Resistance of Plasma Electrolytic Oxidation-Coated AM 50 Mg Alloy (2018) (6)
Ni-Mn3O4 Composite Coating by Electrophoresis/Electrodeposition for Metallic Interconnects Applications (2019) (6)
Arc-discharge synthesis and microstructure characterization of AlN nanowires (2009) (6)
Comparative Study of Hot Corrosion Behavior of theEnamel Based Composite Coatings and the ArcIon Plating NiCrAlY on TiAl Alloy (2018) (6)
Molecular mechanisms of a single H2O diffusion on palladium surfaces. (2008) (6)
The electrochemical corrosion behavior of K38G nanocrystalline thin film in 3.5% NaCl solution (2011) (6)
Initial Oxidation Behavior of Ferritic Stainless Steel Interconnect with Sputtered NiFe2 Alloy Coating (2020) (6)
Influence of Cr2O3 particles on corrosion, mechanical and thermal control properties of green PEO coatings on Mg alloy (2021) (6)
Corrosion mechanism of Mo/Nd16Fe71B13/Mo film in a simulated marine atmosphere (2011) (6)
Microstructure and cavitation erosion resistance of arc ion plating NiCrAlY coating on the 304L stainless steel (2022) (6)
Effect of oxide scale on corrosion behavior of HP-13Cr stainless steel during well completion process (2019) (6)
Comparison of electroplating and sputtering Ni for Ni/NiFe2 dual layer coating on ferritic stainless steel interconnect (2021) (6)
Effects of pre-oxidation on the corrosion behavior of pure Ti under coexistence of solid NaCl deposit and humid oxygen at 600 °C: the diffusion of chlorine (2020) (6)
The development of a mechanistic-chemometrics model with multi-degree of freedom for pitting corrosion of HP-13Cr stainless steel under extremely oilfield environments (2021) (6)
An in-situ formed ceramic/alloy/ceramic sandwich barrier to resist elements interdiffusion between NiCrAlY coating and a Ni-based superalloy (2021) (6)
Fabrication of phosphate conversion coatings on rolled AZ31 magnesium alloy: Variation of corrosion resistance on different planes induced by the crystallographic texture (2021) (6)
A Mixture of D-Amino Acids Enhances the Biocidal Efficacy of CMIT/MIT Against Corrosive Vibrio harveyi Biofilm (2020) (6)
Effect of Interfacial Microstructure on Mechanical and Tribological Properties of Cu/WS2 Self-lubricating Composites Sintered by Spark Plasma Sintering (2021) (6)
A New High-Efficiency Experimental Design for Optimizing Various Flow Velocities Testing in Extremely Aggressive Formation Water (2019) (6)
The dual role of Mg2+in the conversion bath during the treatment of magnesium alloys: The completing effect between heterogeneous nucleation and crystal growth (2021) (6)
Study of filiform corrosion inhibition by a compact plasma electrolytic oxidation film on a AZ31 Mg alloy (2016) (5)
Adsorption and Diffusion Behavior of Cl- on Sputtering Fe-20Cr Nanocrystalline Thin Film in Acid Solution (pH=2) (2015) (5)
The protective properties of high-temperature oxide film in 3.5% NaCl solution (2009) (5)
Corrosion Behaviors of Nitride Coatings on Titanium Alloy in NaCl-Induced Hot Corrosion (2021) (5)
Crevice Corrosion Behavior of Nanocrystalline Stainless Steel Fabricated by Magnetron Sputtering in Chloride Containing Solution (2015) (5)
Thermal cycling behavior of nanostructured and conventional yttria-stabilized zirconia thermal barrier coatings via air plasma spray (2019) (5)
Electronic structure, lattice constant, optical and mechanical properties for NaCl-structured Ti-Al-N by density functional theory (2005) (5)
Thermal shock and self-healing behavior of the enamel composite coatings with addition of various nanoparticles at temperatures of 700 and 800 °C (2021) (5)
Inhibition Behavior of Ascorbic Benzoate for Steel Rebar in Alkaline Solution (2011) (5)
Anticorrosion Performance of LDH Coating Prepared by CO2 Pressurization Method (2018) (5)
CuFe2O4/CuO coating for solid oxide fuel cell steel interconnects (2021) (5)
Oxidation Behavior of Sputtered DD98M Nanocrystalline Coating at 1000 °C (2016) (5)
Corrosion Behavior of GH4169 Alloy under Alternating Oxidation at 900 °C and Solution Immersion (2019) (5)
Effects of oxygen incorporation in low expansion Ni+CrAlYN nanocomposite coatings on the oxidation behavior (2020) (5)
Corrosion Inhibition by Sorbitol/Diethylenetriamine Condensation Product for Carbon Steel in 3.5% NaCl Saturated Ca(OH)(2) Solution (2011) (5)
Effect of Different Scale Precipitates on Corrosion Behavior of Mg–10Gd–3Y–0.4Zr Alloy (2018) (5)
Electrochemical corrosion behavior of a novel antibacterial stainless steel (2009) (5)
Preparation and Oxidation Performance of a NiCoCrAlYSiHf + NiAl Composite Coating Deposited by Arc Ion Plating and Magnetron Sputtering Techniques (2019) (5)
Effect of pre-oxidation on hot corrosion resistance of HR3C stainless steel in sulfate salt with or without Fe2O3 (2021) (5)
Effect of NiFe2 coating thickness on high temperature oxidation and electrical behavior of coated steel interconnect (2020) (5)
Corrosion behavior of high nitrogen nickel-free austenitic stainless steel in the presence of artificial saliva and Streptococcus mutans. (2021) (5)
ELECTROLESS NICKEL PLATING ON AZ91D MAGNESIUM ALLOY (2009) (5)
Cellular Automata Study of the Combined Effects of Passive Film Breakdown and Repassivation on Metastable Pits on Sputtered Nanocrystalline Stainless Steel (2019) (5)
Phase structure of sputtered Ta coating and its ablation behavior by laser pulse heating (LPH) (2021) (5)
Comparison of CrN, AlN and TiN Diffusion Barriers on the Interdiffusion and Oxidation Behaviors of Ni+CrAlYSiN Nanocomposite Coatings (2021) (4)
Technical Note: Cyclohexylamine Carbonate as Vapor Phase Inhibitor for Nd-Fe-B Magnet (2013) (4)
Effect of Al and Cr on the oxidation behavior of nanocrystalline coatings at 1050 oC (2022) (4)
The fabrication of FeMnO/RGO as anticorrosive microwave absorbent toward marine environment (2021) (4)
Metals Supported Water Monomers: the Bonding Nature Revisited (2010) (4)
Micro-Arc Oxidized Corrosion Resistant Interlayer on Magnesium Alloy with Electromagnetic Wave Absorption Coatings (2012) (4)
Protection of 304 stainless steel by nano-modified silicone coating in cyclically alternate corrosion environment (2021) (4)
Interspecies interactions of Vibrio azureus and Jeotgalibacillus alkaliphilus on corrosion of duplex stainless steel (2021) (4)
Microbiologically influenced corrosion behavior of friction stir welded S32654 super austenitic stainless steel in the presence of Acidithiobacillus caldus SM-1 biofilm (2020) (4)
EFFECTS OF SECOND PHASES ON MICROARC OXIDATION PROCESS OF MAGNESIUM BASE MATERIALS (2016) (4)
The effect of microstructure and elemental content on corrosion and corrosion inhibition of mild steel in a 0.5 M H2SO4 environment (2015) (4)
Effect of TiN diffusion barrier on elements interdiffusion behavior of Ni/GH3535 system in LiF-NaF-KF molten salt at 700 ℃ (2020) (4)
Evaluation of Ni-Fe base alloys as inert anode for low-temperature aluminium electrolysis (2021) (4)
Corrosion failure analysis on the copper alloy flange by experimental and numerical simulation (2020) (4)
On high-temperature oxidation and protection of 2:17-type SmCo-based magnets (2015) (4)
Optimization of the Corrosion Resistance of Electroless Ni–W–P Coatings on Magnesium Alloys by the Response Surface Methodology (2020) (4)
Studies of different acid doped polyaniline incorporated into epoxy organic coatings on the Mg alloy (2022) (4)
Effect of Ti on the microstructure change and oxidation behavior of Ni+CrAlYHfSiN composite coatings (2019) (4)
Influence of fuel combustion on the corrosion behavior of pipeline steels in fire flooding technology (2022) (4)
Long-Term Dual Cathodic Protection for Q235 Carbon Steel by Co(OH)2/Graphene/TiO2 Photocatalytic Material and Traditional Sacrificial Anode (2020) (4)
Effect of Carrier Waveform Frequency on the Microstructure of Al2O3 Plasma Electrolyic Oxidation Films (2013) (4)
Revealing internal corrosion of GH4169 with stress coupled solid NaCl deposited in a humid environment of 600°C (2021) (4)
Interfacial microstructure evolution of glass‐based coating on IC10 superalloy with a Ni3Al bond‐coat at 1050°C (2017) (3)
Effect of Current Density on Deposition of Ni-Mn3O4 Composite Coating and its High Temperature Behavior (2020) (3)
Studies on the Oxidation Behavior and Microstructural Evolution of Two Nb-Modified HR3C Austenitic Steels under Pure Water Vapor at 650 °C (2020) (3)
Hot Corrosion Behavior of SiO2–Al2O3–Glass Composite Coating on Ti–47Al–2Cr–2Nb Alloy: Diffusion Barrier for S and Cl (2018) (3)
TEM Study of the Initial Oxidation of Ti42Al48Cr8Ag2 (2007) (3)
Effect of γ′ Phase Elements on Oxidation Behavior of Nanocrystalline Coatings at 1050 °C (2021) (3)
Comparative Study of Thermal Shock Behavior of the Arc Ion Plating NiCrAlY and the Enamel Based Composite Coatings (2017) (3)
TiO2 Nanotube Heterostructure Modified with a Metal-Organic Framework Showing Robust Stability for Photocathodic Protection (2021) (3)
Influence of Micro-Structure on Oxidation Behavior of a Ni-Based Superalloy at 1000°C (2008) (3)
A novel single-phase γ′ nanocrystalline coating with high resistance to oxidation and scale rumpling yet mitigated interdiffusion with the alloy substrate (2021) (3)
Formation of self-healing PEO coatings on AM50 Mg by in-situ incorporation of zeolite micro-container (2022) (3)
Effect of Temperature on Corrosion Resistance of Layered Double Hydroxides Conversion Coatings on Magnesium Alloys Based on a Closed-Cycle System (2021) (3)
Effect of Nitrogen on High Temperature Oxidation Behavior of AlN-doped Gradient Coating (2022) (3)
Research Progress on Wear-resistant Coatings for Ti-alloy (2018) (3)
Corrosion behavior of β′ phase in Mg-10Gd-3Y-0.4Zr alloy during aging treatment by HAADF-STEM (2019) (3)
Thermal conversion process of CuFe2O4 coating on steel interconnect for solid oxide fuel cell applications (2021) (3)
Hot Corrosion Behavior of Sputtered Nanocrystalline Coating with Yttrium Addition at 900 °C (2014) (3)
An organic silicone composite coating for protection of Ti-6Al-4V alloy: oxidation behavior at 600 ºC in dry air (2022) (3)
Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements Under Marine Alternating Hydrostatic Pressure (2019) (3)
The stability of a protective Al2O3 layer on a niobium ion-implanted γ-TiAl intermetallic compound (2000) (3)
Diluent decomposition-assisted formation of LiF-rich solid–electrolyte interfaces enables high-energy Li-metal batteries (2022) (3)
Exploring the hindering mechanism of element Ti on the adherence of CoO-bearing one-coat enamel/steel (2018) (3)
Single Dense Layer of PEO Coating on Aluminum Fabricated by “Chain-like” Discharges (2022) (3)
Hot Corrosion of Ti-Based Intermetallics with Coatings in NaCl+ (Na,K)2SO4 Melts at 750°C (2009) (2)
Initial Oxidation Behavior of Ferritic Stainless Steel with Sputtered Mn–Cu Coating (2017) (2)
Studies on the Oxidation Behavior of a Designed Nanocrystalline Coating on K38 Alloy at 1050 °C (2020) (2)
CYCLIC OXIDATION BEHAVIOUR OF MICROCRYSTALLIZED CoCrAl ALLOY COATING (1992) (2)
Corrosion and Oxidation Protection of Ti6Al4V Alloy by an Inorganic Metal Modified Silicate Composite Coating (2010) (2)
Effect of pre-oxidation on the failure mechanisms of EB-PVD thermal barrier coatings with (Ni,Pt)Al bond coats (2021) (2)
Ni-Mn3O4-CeO2 composite coating on ferritic stainless steel interconnects (2021) (2)
The oxidation behavior of Tie46.5Ale5Nb at 900 C (2007) (2)
Ni/AlN Composite Coating for Corrosion and Elements Interdiffusion Resistance in Molten Fluoride Salts System (2021) (2)
Effect of Al Content on Corrosion Resistance of (Ti1-xAlx)N Coatings under NaCl Deposit in Wet Oxygen at 600°C (2007) (2)
Corrosion of Carbon Steel Q235 in a Crevice Under a Simulated Disbonded Coating (2014) (2)
Effect of Energy Density on Microstructure and Properties of Al2O3 Plasma Electrolysis Oxidation Film (2013) (2)
Effect of ZrO2 addition on in-vitro bioactivity and mechanical properties of SiO2–Na2O–CaO–P2O5 bioactive glass-ceramic (2022) (2)
Improved Oxidation and Hot Corrosion Resistance of 1Cr11Ni2W2MoV Stainless Steel at 650 °C by a Novel Glass-Ceramic Coating (2021) (2)
Epoxy Based Conductive Anti-corrosion Coatings for Grounding Grid (2016) (2)
Synergistic effects of fluid flow and hydrostatic pressure on the degradation of epoxy coating in the simulated deep-sea environment (2021) (2)
The Investigation of the Interdiffusion Barrier in TiAl/MCrAlY System (2010) (2)
Effect of thermal aging and irradiation on the electrochemical and passivation behavior of 308L stainless steel in simulated pressurized water reactor environment (2020) (2)
ELECTROCHEMICAL BEHAVIOR OF Fe-20Cr NANOCRYSTALLINE COATINGS (2009) (2)
Evaluation of Glass Coatings with Various Silica Content Corrosion in a 0.5 M HCl Water Solution (2021) (2)
Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy (2015) (2)
Photocatalytic Property of TiO 2 Films Deposited by Pulse (2004) (2)
Corrosion of the WC-12Co and enamel coatings in liquid Zn-55Al alloy at 640 °C (2021) (2)
Cyclic Oxidation Behavior of Sputtered Nanocrystalline Coating with Yttrium Additions in Air (2008) (2)
Effect of the Flow Velocity on the Corrosion Behavior of UNS S41426 Stainless Steel in the Extremely Aggressive Oilfield Environment for the Tarim Area (2020) (2)
(Invited) Benefits of Zr Addition on Hot Corrosion and Isothermal Oxidation Resistance of Single-Phase (Ni,Pt) Al Coatings (2020) (2)
Oxidation Behavior of K38 Superalloy with Different Amounts of Yttrium Addition at 1173K in Air (2011) (2)
Sputtered Fe1·5CoNi0.5 coating: An improved protective coating for SOFC interconnect applications (2022) (2)
Preparation and Wear Behavior of Enamel Coating on Ti–6Al–4V ELI Titanium Alloy (2017) (1)
Comparative Study on the Initial Oxidation Behavior of Conventional and Nanocrystalline MCrAlY Coatings - Effect of Microstructure Evolution and Dynamic Mechanisms (2022) (1)
Mysterious Waters at Metal Surfaces (2010) (1)
THE SYNERGETIC EFFECT OF NaCl AND WATER VAPORON THE CORROSION BEHAVIOR OF K38G ALLOYAND ITS NANOCRYSTALLINE COATING AT 600℃-700℃ (2009) (1)
HIGH TEMPERATURE OXIDATION BEHAVIOR OF PURE NiAND ITS SPUTTERED NANOCRYSTALLINE COATING (2009) (1)
High Temperature Oxidation and Electrochemical Corrosion Behavior of Al Nano-particle Modified Silicone Coating on 304 Stainless Steel (2019) (1)
Preparation and Anticorrosion Performance of Polyaniline/Vermiculite Modified Waterborne Epoxy Coatings (2016) (1)
Effect of Acidizing Process on the Stress Corrosion Cracking of HP-13Cr Stainless Steel in the Ultra-depth Well Environment (2021) (1)
Effect of enamel coating on long-term oxidation of Ti65 alloy (2004) (1)
Preparation and High Temperature Corrosion Behavior of Aluminized Nanocrystalline Coating on DD98M Alloy (2019) (1)
Electrodeposited Metal Ni Coating on Ferritic Stainless Steel for Intermediate Temperature SOFC Interconnect Application (2011) (1)
Development and Oxidation of a RexOy- Modified Chromizing Coating (2004) (1)
ISOTHERMAL OXIDATION BEHAVIOR OF SPUTTERED IN738 NANOCRYSTALLINE COATING (2009) (1)
Investigating the Stress Corrosion Cracking (SCC) Susceptibility of Ti-6Al-4V Alloys Fabricated by Electron Beam Melting in Deep-Sea Environment (2021) (1)
Nanocrystalline, Enamel and Composite Coatings for Superalloys (2018) (1)
A Novel Electrodeposited Ni-Cr-Al Nanocomposite with Improved Oxidation Resistance (2012) (1)
The effect of reactively-sputtered alumina films on the oxidation resistance of CoCrAlY coatings (1993) (1)
Protection Mechanism Study of Enamel-Based Composite Coatings Under the Simulated Combusting Gas Shock (2018) (1)
Effect of Nitrogen Doping on Microstructure and Wear Resistance of Tantalum Coatings Deposited by Direct Current Magnetron Sputtering (2018) (1)
Corrosion Characteristics of Cu-20Zr alloy in Hydrochloric Acid Solution (2009) (1)
High Temperature Oxidation and Tribological Behaviors of NiCrAl-Graphite Self-Lubricating Composites (2021) (1)
Effect of oxygen doping on the corrosion behavior of nanocrystalline coating under the synergy of solid NaCl deposit and water vapor (2022) (1)
STUDY ON THE ELECTROCHEMICAL CORROSION BEHAVIOROF TiN COATING IN ACID AND SALT SOLUTIONIIThe effect of Al addition on the corrosion resistance andfailure mechanism of TiN coating in acid and salt solution (2009) (1)
Corrosion Resistance of Plasma Electrolytic Oxidation Coatings on LD7 Alloy in Oxalate and Dihydrogen Phosphate Electrolytes. (2019) (1)
Hot Corrosion and Cyclic Oxidation Performance of a Ptal2-Dispersed (Ni,Pt)Al Coating Prepared by Low-Activity High-Temperature Aluminizing (2022) (1)
STUDY ON THE ELECTROCHEMICAL CORROSION BEHAVIOROF TiN COATING IN ACID AND SALT SOLUTIONI.The corrosion resistance and failure mechanism of TiN coating in acid and salt solution (2009) (1)
Effect of Si addition on microstructures and oxidation behavior of CoCrW alloy prepared by spark plasma sintering (2023) (1)
STUDY ON THE ELECTROCHEMICAL CORROSION BEHAVIOR OF SPUTTERED Fe-20Cr NANOCRYSTALLINE COATING (2009) (1)
Grain Size Effect on the Electrochemical Corrosion Behavior of Surface Nanocrystallized Low-Carbon Steel, October 2004 (2004) (1)
Excellent hot-corrosion and thermal-shock resistance of metal-enamel composite coating on martensitic stainless steel enabled by interface engineering (2022) (1)
Thermal shock and sulfuric acid corrosion behavior of enamel–nano‐Ni composite/enamel–nano‐nickel composite coating (2020) (1)
d-leucine enhances antibiofilm activity of chlorhexidine against caries-causing Streptococcus mutans biofilm (2021) (1)
Preparation and Anticorrosion Performance of Conductive Epoxy Resin Based Composite Coatings (2014) (1)
Oxidation Performance and Interdiffusion Behavior of a Pt-Modified Aluminide Coating with Pre-deposition of Ni (2019) (1)
Corrosion-detection and Assessment Methods for Abradable Sealing Coatings (2017) (1)
Effect of Preferred Orientation on Corrosion Behavior of Hot-pressed and Hot-deformed Nanocrystalline NdFeB Magnet (2014) (1)
STUDY ON THE EFFECT OF ZINC PIGMENTS SIZE ON THE ELECTROCHEMICAL BEHAVIOR OF ORGANIC ZINC-RICH COATINGS (2009) (1)
Inhibitory Effect of Vibrio neocaledinocus sp. and Pseudoalteromonas piscicida Dual-Species Biofilms on the Corrosion of Carbon Steel (2021) (1)
CrxN/Mn1.7Cu1.3 coating on ferritic stainless steel for solid oxide fuel cell interconnects (2022) (0)
Effect of Trace Cl- and Cu2+ Ions on Corrosion Behavior of 3A21 Al-alloy in Ethylene Glycol Coolant (2021) (0)
Preparation of aluminized nanocrystalline coating and study of its high temperature corrosion behavior (2019) (0)
oxidation resistance of CoCrAlY coatings (1993) (0)
Oxidation and electrical behavior of Ni-Mn3O4-La2O3-coated SOFC interconnect steel (2022) (0)
High-temperature performance of Pt-modified Ni-20Co-28Cr-10Al-0.5Y coating: Formation mechanism of Pt-rich overlayer and its effect on thermally grown oxide failure (2023) (0)
Invite d Review Mysterious Waters at Metal Surfaces (2010) (0)
CLUSTER MATTER FORMATION IN CLUSTER COLLISIONS (2005) (0)
Structure and mechanical properties of MAO coatings formed on aluminum-coated titanium alloy (2022) (0)
WITHDRAWN: Methanogenic archaea and sulfate reducing bacteria induce severe corrosion of steel pipelines after hydrostatic testing (2020) (0)
High-Temperature Corrosion Behavior of Sputtered Ni-Based Nanocrystalline Coating with Yttrium Addition in Chloride at 900°C (2012) (0)
Effect of Pre-treatment on Corrosion Resistance of Titanate-zirconate Conversion Coating on Magnesium Alloy (2016) (0)
Preparation and Enhanced Hot Corrosion Resistance of aZr-Doped PtAl2+(Ni, Pt)Al Dual-Phase Coating (2018) (0)
Adsorption anddiffusion behaviour of Cl- on sputtering Fe-20Cr nanocrytsallinethin film in pH = 2 acid solution (2015) (0)
Achieving well-balanced mechanical and tribological properties of copper matrix self-lubricating composites by adding pre-metallized B4C particles with core-shell microstructure (2023) (0)
Preparation and Thermal Shock Behavior of a Metal-enamel High-temperature Protective Coating (2019) (0)
Enhancing cavitation erosion resistance of sputtered NiCrAlTi coatings with coherent nanoprecipitates (2022) (0)
Corrosion behavior of pure Ti under continuous NaCl solution spraying at 600 °C (2022) (0)
Study of Electrochemical Corrosion Behavior of Nanocrystalline Thin Film by Electrochemical Techniques and In Situ AFM (2012) (0)
NiO/NiFe2O4 dual-layer coating on pre-oxidized SUS 430 steel interconnect (2022) (0)
Oxidation resistance of TiAl improved by a CoCrAl coating (1993) (0)
Failure Mechanism of Organic Coating with Modified Graphene Under Simulated Deep-sea Alternating Hydrostatic Pressure (2020) (0)
Effect of the calcareous deposits on the cathodic protection potential of 10Ni5CrMoV high‐strength steel in a deep‐sea environment by using the response surface methodology (2020) (0)
The cyclic oxidation behavior of a Pt modified γ’ nanocrystalline coating at 1150 ℃ (2022) (0)
Study of Microstructure and Corrosion Behavior of Multilayered Ni Coatings by Ultrasound-assisted Electrodeposition (2020) (0)
Effect of Nano-Al2O3 and -TiO2 Modified Silicone Coatings on High Temperature Oxidation Resistance of 304 Stainless Steel (2021) (0)
Annealing Effects on Properties of Pure and Iron Doped Nano-TiO2 Films Prepared by Reactive Magnetron Sputtering (2010) (0)
Improving the oxidation behavior of low expansion Ni + CrAlYNO coating systems by regulating the oxygen content (2021) (0)
Corrigendum to Superhydrophobic composite coatings in bacterial culture media: Durable antibacterial activity and enhanced corrosion resistance [Composites Communications 27 (2021) 100857] (2021) (0)
THE SYNERGETIC EFFECT OF NaCl AND WATER VAPOR ONTHE CORROSION BEHAVIOR OF PURE Ni AT 600℃-700℃ (2009) (0)
Exfoliation Corrosion Behavior of 2A02 Al-alloy in a Simulated Marine Atmospheric Environment (2018) (0)
Embedded Microelectrode for In situ Electrochemical Impedance Spectroscopy Measurement of Organic Coating Under Marine Alternating Hydrostatic Pressure (2018) (0)
Novel Electrodeposited Ni-Based Nanocomposite Precursors for Nitriding and Low Temperature Chromizing (2006) (0)
Effect of Al/Si Content on Corrosion of Ni-based Alloys in Supercritical Water (2019) (0)
Sulfate Salts Induced Corrosion of Titanium Aluminides (1994) (0)
High-Temperature Corrosion Behaviour of Pt-Modified Aluminide Coating Under the Effect of Nacl Plus Water Vapour and the Influence of Pre-Oxidation Treatment (2022) (0)
Preparation of m-phenylenediamine-graphene oxide/organic coating and study on its anticorrosive performance (2021) (0)
Synergistic effect between fluid flow and hydrostatic pressure on the failure behaviour of epoxy coating under deep ocean hydrodynamic environment (2019) (0)
Effect of urea–formaldehyde nanoparticles on the barrier property and delamination resistance for epoxy coating (2021) (0)
Study of corrosion inhibitors on AZ91D magnesium alloy (2018) (0)
CORROSION BEHAVIOR OF Fe-20Cr ALLOY TREATEDBY ULTRASONIC SHOT PEENING TECHNIQUE〖ST〗〖HT〗〖WT〗〖KH1D〗 (2009) (0)
THE EFFECT OF NANOCRYSTALLIZATION ON HOT CORROSION BEHAVIOR OF K38G ALLOY AT 900 (2009) (0)
Effect of nano-Ti pigment on the corrosion resistance of an epoxy coating (2009) (0)
Short Term Oxidation Behavior of Si-Free Low-Cr Alloy Sputtered Coating (2014) (0)
A general strategy towards improving the strength and thermal shock resistance of glass-ceramics through microstructure regulation (2022) (0)
Effect of Cr Content on Oxidation of Ni-based Alloy in Supercritical Water (2018) (0)
Self-healing behavior of enamel incorporated with nickel particles of various sizes during high temperature oxidation process (2022) (0)
Anti-CMAS corrosion mechanism of Al2O3 pore sealing and laser remelting on thermal barrier coatings (2022) (0)
Oxidation Behavior of 304 Stainless Steel in Supercritical Water (2017) (0)
Oxidation Behavior of CoCrAlY Coated Intermetallic Ni3Al-Base Alloy IC6 (1994) (0)
High temperature oxidation behavior of a sputtered pure Ni nanocrystalline coating at 700 – 900 8 C (2003) (0)
Influence of hydrostatic pressure on the corrosion and discharging behavior of Al-Zn-In-Mg-Ti alloy (2023) (0)
Corrosion Behavior of Ti60 Alloy in Fog of NaCl Solution at 600 (2021) (0)
Hot Corrosion Resistance of Reactive Sputtered Al2O3 Coating (1994) (0)
Protective Performance of a Novel Silicone Coating ES150 Modified with Nano-particulate of Metal for AZ91D Mg-alloy (2018) (0)
Microstructure and Improved Thermal Shock Behaviour of an In Situ Formed Metal-Enamel Interlocking Coating (2021) (0)
Effect of cathode pulse square-wave on the microstructure and corrosion resistance of PEO coatings of AZ91D magnesium alloy prepared in the Na2C4H4O6–KF–Na2SiO3 system (2022) (0)
Effect of Al2O3 content on microstructure and oxidation behavior of silicate enamel coatings on a Ni-based superalloy at 1000 oC (2022) (0)
Preparation of a Duplex Nanocrystalline Coating by Magnetron Sputtering and Its Oxidation Performance. (2019) (0)
Structure and Wear Performance of Titanium Alloy by Low-Temperature Plasma Oxy-Nitriding (2023) (0)
CORROSION RESISTANCE OF NANOCRYSTALLIZEDIN738 COATING IN SALT SOLUTION (2009) (0)
Effect of sintering technology on the stability of solution-filled external pressure balanced reference electrode (2021) (0)
Synergistic Effect of Inhibitors of an Imidazoline Derivative and Tetraethylenepentamine on Corrosion Inhibition of Steel Rebar in an Artifial Concrete Pore Solution (2015) (0)
Oxidation behavior of the AlN coatings on the TiAl alloy at 900 °C (2022) (0)
Corrosion Resistance of Alternately Multilayered Coating Ti/TiAlN on Ti-alloy Ti-6Al-4V Beneath a Solid NaCl Film in Atmosphere of Water Vapor and Oxygen at 600 ℃ (2017) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Fuhui H. Wang?

Fuhui H. Wang is affiliated with the following schools:

Federal University of Technology Owerri
Northeastern University

Fuhui H. Wang's Academic­Influence.com Rankings

Why Is Fuhui H. Wang Influential?

Fuhui H. Wang's Published Works

Published Works

What Schools Are Affiliated With Fuhui H. Wang?

Fuhui H. Wang's AcademicInfluence.com Rankings