Guang-yong Sun

Guang-yong Sun's AcademicInfluence.com Rankings

Guang-yong Sun

Engineering

#5360

World Rank

#6614

Historical Rank

Mechanical Engineering

#472

World Rank

#516

Historical Rank

Applied Physics

#1533

World Rank

#1565

Historical Rank

engineering Degrees

Download Badge

Engineering

Guang-yong Sun's Degrees

PhD Mechanical Engineering University of California, Berkeley

Why Is Guang-yong Sun Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Guang-yong Sun's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

On design optimization for structural crashworthiness and its state of the art (2017) (313)
Crashworthiness design for functionally graded foam-filled thin-walled structures (2010) (277)
Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness (2014) (251)
On design of multi-cell tubes under axial and oblique impact loads (2015) (220)
Crashworthiness design of vehicle by using multiobjective robust optimization (2011) (217)
Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models (2013) (209)
Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases (2015) (208)
Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness (2015) (181)
Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes (2016) (173)
Lightweight design of carbon twill weave fabric composite body structure for electric vehicle (2013) (171)
Optimization of foam-filled bitubal structures for crashworthiness criteria (2012) (170)
On design of multi-cell thin-wall structures for crashworthiness (2016) (165)
Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading (2018) (165)
Experimental and numerical study on honeycomb sandwich panels under bending and in-panel compression (2017) (164)
Parameterization of criss-cross configurations for multiobjective crashworthiness optimization (2017) (164)
Crashworthiness of vertex based hierarchical honeycombs in out-of-plane impact (2016) (152)
On hierarchical honeycombs under out-of-plane crushing (2017) (152)
Multiobjective robust optimization method for drawbead design in sheet metal forming (2010) (150)
A two-stage multi-fidelity optimization procedure for honeycomb-type cellular materials (2010) (150)
A two-stage multi-fidelity optimization procedure for honeycomb-type cellular materials (2010) (150)
A comparative study on thin-walled structures with functionally graded thickness (FGT) and tapered tubes withstanding oblique impact loading (2015) (147)
Multiobjective optimization for tapered circular tubes (2011) (134)
Parametric analysis and multiobjective optimization for functionally graded foam-filled thin-wall tube under lateral impact (2014) (133)
A Smoothed Finite Element Method (SFEM) for Linear and Geometrically Nonlinear Analysis of Plates and Shells (2008) (129)
Out-of-plane crashworthiness of bio-inspired self-similar regular hierarchical honeycombs (2016) (129)
A Comparative study on multiobjective reliable and robust optimization for crashworthiness design of vehicle structure (2013) (128)
Modeling for CFRP structures subjected to quasi-static crushing (2018) (122)
Energy absorption mechanics for variable thickness thin-walled structures (2017) (118)
Crushing analysis of foam-filled single and bitubal polygonal thin-walled tubes (2014) (116)
On crushing characteristics of different configurations of metal-composites hybrid tubes (2017) (114)
Theoretical prediction and optimization of multi-cell hexagonal tubes under axial crashing (2016) (113)
Experimental investigation of the quasi-static axial crushing behavior of filament-wound CFRP and aluminum/CFRP hybrid tubes (2018) (110)
Experimental investigation of the quasi-static axial crushing behavior of filament-wound CFRP and aluminum/CFRP hybrid tubes (2018) (110)
Experimental investigation of the quasi-static axial crushing behavior of filament-wound CFRP and aluminum/CFRP hybrid tubes (2018) (110)
Energy absorption mechanics and design optimization of CFRP/aluminium hybrid structures for transverse loading (2019) (110)
Experimental and numerical investigation into the crashworthiness of metal-foam-composite hybrid structures (2019) (109)
Multiobjective reliability-based optimization for design of a vehicledoor (2013) (109)
Crashworthiness design for functionally graded foam-filled bumper beam (2015) (108)
Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres (2019) (108)
Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodel (2014) (107)
High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations (2018) (103)
On crashworthiness design of hybrid metal-composite structures (2020) (103)
Multiobjective robust design optimization of fatigue life for a truck cab (2015) (103)
Experimental and numerical studies on indentation and perforation characteristics of honeycomb sandwich panels (2018) (102)
Surface morphology optimization for osseointegration of coated implants. (2010) (100)
Theoretical, numerical, and experimental study on laterally variable thickness (LVT) multi-cell tubes for crashworthiness (2016) (99)
Multi-objective and multi-case reliability-based design optimization for tailor rolled blank (TRB) structures (2017) (99)
Mechanical properties of hybrid composites reinforced by carbon and basalt fibers (2018) (96)
Crashworthiness design for foam-filled thin-walled structures with functionally lateral graded thickness sheets (2015) (96)
Comparative study on metal/CFRP hybrid structures under static and dynamic loading (2020) (93)
On functionally graded composite structures for crashworthiness (2015) (92)
Radial basis functional model for multi-objective sheet metal forming optimization (2011) (90)
Topological configuration analysis and design for foam filled multi-cell tubes (2018) (89)
Multiobjective crashworthiness optimization of hollow and conical tubes for multiple load cases (2014) (88)
A new multi-objective discrete robust optimization algorithm for engineering design (2018) (88)
Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores (2018) (88)
Topology optimization for 3D microstructures of viscoelastic composite materials (2021) (87)
Crushing analysis and multiobjective optimization for functionally graded foam-filled tubes under multiple load cases (2014) (87)
Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets (2019) (87)
Crashworthiness design of foam-filled bitubal structures with uncertainty (2014) (85)
Topology optimization for negative permeability metamaterials using level-set algorithm (2011) (81)
Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates (2019) (80)
Design of transversely-graded foam and wall thickness structures for crashworthiness criteria (2016) (80)
Dynamical bending analysis and optimization design for functionally graded thickness (FGT) tube (2015) (80)
Crashworthiness analysis and optimization of sinusoidal corrugation tube (2016) (79)
Equivalent Circuit Derivation and Performance Analysis of a Single-Sided Linear Induction Motor Based on the Winding Function Theory (2012) (78)
Crashworthiness design of vehicle structure with tailor rolled blank (2016) (76)
Multiobjective robust optimization for crashworthiness design of foam filled thin-walled structures with random and interval uncertainties (2015) (75)
Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse (2020) (75)
Sensitivity analysis and reliability based design optimization for high-strength steel tailor welded thin-walled structures under crashworthiness (2016) (75)
Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse (2020) (75)
Computational analysis and optimization of sandwich panels with homogeneous and graded foam cores for blast resistance (2020) (74)
On low-velocity impact response of foam-core sandwich panels (2020) (72)
A level-set procedure for the design of electromagnetic metamaterials. (2010) (72)
Comparison of functionally-graded structures under multiple loading angles (2015) (72)
Dynamic response of sandwich panel with hierarchical honeycomb cores subject to blast loading (2019) (72)
Crashworthiness analysis and optimization of fourier varying section tubes (2017) (72)
Configurational optimization of multi-cell topologies for multiple oblique loads (2018) (71)
On design of graded honeycomb filler and tubal wall thickness for multiple load cases (2016) (70)
An experimental and numerical study on quasi-static and dynamic crashing behaviors for tailor rolled blank (TRB) structures (2017) (69)
Experimental study on crashworthiness of tailor-welded blank (TWB) thin-walled high-strength steel (HSS) tubular structures (2014) (69)
Nondeterministic optimization of tapered sandwich column for crashworthiness (2018) (69)
On crashing behaviors of aluminium/CFRP tubes subjected to axial and oblique loading: An experimental study (2018) (67)
Crashworthiness design of multi-component tailor-welded blank (TWB) structures (2013) (66)
On fracture characteristics of adhesive joints with dissimilar materials – An experimental study using digital image correlation (DIC) technique (2018) (66)
Energy absorption mechanism of axially-varying thickness (AVT) multicell thin-walled structures under out-of-plane loading (2019) (65)
Bending characteristics of top-hat structures through tailor rolled blank (TRB) process (2018) (65)
Multi-fidelity optimization for sheet metal forming process (2011) (65)
Energy absorption mechanism of axially-varying thickness (AVT) multicell thin-walled structures under out-of-plane loading (2019) (65)
Crashworthiness analysis of octagonal multi-cell tube with functionally graded thickness under multiple loading angles (2017) (64)
Variable fidelity design based surrogate and artificial bee colony algorithm for sheet metal forming process (2012) (63)
Crushing analysis and design optimization for foam-filled aluminum/CFRP hybrid tube against transverse impact (2020) (62)
On lateral compression of circular aluminum, CFRP and GFRP tubes (2020) (62)
Phase field fracture in elasto-plastic solids: Abaqus implementation and case studies (2019) (61)
Residual flexural properties of CFRP sandwich structures with aluminum honeycomb cores after low-velocity impact (2019) (61)
Discrete robust optimization algorithm based on Taguchi method for structural crashworthiness design (2015) (60)
Investigation on impact behavior of FMLs under multiple impacts with the same total energy: Experimental characterization and numerical simulation (2019) (60)
A method to evaluate the formability of high-strength steel in hot stamping (2015) (59)
Retardation of surface corrosion of biodegradable magnesium-based materials by aluminum ion implantation (2012) (58)
Topological design of multi-cell hexagonal tubes under axial and lateral loading cases using a modified particle swarm algorithm (2018) (57)
Crashworthiness optimization of automotive parts with tailor rolled blank (2018) (57)
Design for cost performance of crashworthy structures made of high strength steel (2019) (56)
On energy absorption of functionally graded tubes under transverse loading (2016) (56)
Quasi-static bending and transverse crushing behaviors for hat-shaped composite tubes made of CFRP, GFRP and their hybrid structures (2020) (54)
Two-scale optimal design of structures with thermal insulation materials (2015) (53)
Residual crashworthiness of CFRP structures with pre-impact damage – An experimental and numerical study (2018) (52)
Experimental study on low-velocity impact responses and residual properties of composite sandwiches with metallic foam core (2019) (52)
On impact behavior of fiber metal laminate (FML) structures: A state-of-the-art review (2021) (51)
On the structural parameters of honeycomb-core sandwich panels against low-velocity impact (2021) (50)
An experimental study on fatigue characteristics of CFRP-steel hybrid laminates (2015) (50)
Multiobjective robust optimization of coronary stents (2016) (49)
On twist springback in advanced high-strength steels (2011) (48)
Lightweight hybrid materials and structures for energy absorption: A state-of-the-art review and outlook (2022) (48)
Phase field fracture in elasto-plastic solids: Variational formulation for multi-surface plasticity and effects of plastic yield surfaces and hardening (2019) (47)
Topological design of phononic crystals for unidirectional acoustic transmission (2017) (46)
Determination of mechanical properties of the weld line by combining micro-indentation with inverse modeling (2014) (44)
Maximizing spatial decay of evanescent waves in phononic crystals by topology optimization (2017) (42)
3D printing of chiral carbon fiber reinforced polylactic acid composites with negative Poisson's ratios (2020) (42)
Experimental investigation into transverse crashworthiness of CFRP adhesively bonded joints in vehicle structure (2013) (41)
Experimental investigation on high strength steel (HSS) tailor-welded blanks (TWBs) (2014) (41)
Crashworthiness study on functionally graded thin-walled structures (2015) (40)
Multiobjective reliability-based optimization for crashworthy structures coupled with metal forming process (2017) (40)
Topology Optimization of Multicell Tubes Under Out-of-Plane Crushing Using a Modified Artificial Bee Colony Algorithm (2017) (39)
Identification of mechanical properties of the weld line by combining 3D digital image correlation with inverse modeling procedure (2014) (38)
Multiobjective optimization design for vehicle occupant restraint system under frontal impact (2013) (37)
Specific wave interface and its formation during magnetic pulse welding (2014) (33)
Comparative study on aluminum/GFRP/CFRP tubes for oblique lateral crushing (2020) (33)
An uncertain multidisciplinary design optimization method using interval convex models (2013) (33)
A study on the critical wall thickness of the inner tube for magnetic pulse welding of tubular Al–Fe parts (2016) (33)
Design optimization of bioinspired helicoidal CFRPP/GFRPP hybrid composites for multiple low-velocity impact loads (2022) (33)
A novel failure criterion based upon forming limit curve for thermoplastic composites (2020) (32)
Failure mechanisms in carbon fiber reinforced plastics (CFRP) / aluminum (Al) adhesive bonds subjected to low-velocity transverse pre-impact following by axial post-tension (2019) (31)
Experimental study on residual properties of carbon fibre reinforced plastic (CFRP) and aluminum single-lap adhesive joints at different strain rates after transverse pre-impact (2019) (31)
On lateral crashworthiness of aluminum/composite hybrid structures (2020) (31)
On lateral crashworthiness of aluminum/composite hybrid structures (2020) (31)
Wear resistance of NiTi alloy after surface mechanical attrition treatment (2010) (31)
Failure mechanisms in carbon fiber reinforced plastics (CFRP) / aluminum (Al) adhesive bonds subjected to low-velocity transverse pre-impact following by axial post-tension (2019) (31)
Microstructural evolution in NiTi alloy subjected to surface mechanical attrition treatment and mechanism (2011) (30)
Multi-objective topology optimization of a vehicle door using multiple material tailor-welded blank (TWB) technology (2018) (30)
The finite element analysis of austenite decomposition during continuous cooling in 22MnB5 steel (2014) (30)
Topology Optimization of an Automotive Tailor-Welded Blank Door (2015) (30)
Identification of material parameters for aluminum foam at high strain rate (2013) (29)
Multi-objective system reliability-based optimization method for design of a fully parametric concept car body (2017) (29)
Crashworthiness design of a steel-aluminum hybrid rail using multi-response objective-oriented sequential optimization (2017) (28)
On failure mechanisms in CFRP/Al adhesive joints after hygrothermal aging degradation following by mechanical tests (2021) (28)
Design and fabrication of biphasic cellular materials with transport properties – A modified bidirectional evolutionary structural optimization procedure and MATLAB program (2012) (28)
Reliability-Based Multiobjective Design Optimization under Interval Uncertainty (2011) (27)
Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings (2020) (27)
Fatigue optimization with combined ensembles of surrogate modeling for a truck cab (2014) (27)
Multiobjective sequential optimization for a vehicle door using hybrid materials tailor-welded structure (2016) (27)
Optimization of Spot-Welded Joints Combined Artificial Bee Colony Algorithm with Sequential Kriging Optimization (2015) (25)
Level‐set topology optimization for maximizing fracture resistance of brittle materials using phase‐field fracture model (2020) (25)
A bio-inspired foam-filled multi-cell structural configuration for energy absorption (2022) (25)
Crashworthiness optimization with uncertainty from surrogate model and numerical error (2018) (24)
Topological design of structures under dynamic periodic loads (2017) (24)
Tensile performance of basalt fiber composites with open circular holes and straight notches (2020) (22)
Phase field fracture in elasto-plastic solids: a length-scale insensitive model for quasi-brittle materials (2020) (22)
Topographical design of stiffener layout for plates against blast loading using a modified ant colony optimization algorithm (2019) (22)
Inverse identification of cell-wall material properties of closed-cell aluminum foams based upon Vickers nano-indentation tests (2020) (22)
Optimizaition for formability of plain woven carbon fiber fabrics (2021) (22)
Fatigue behavior of carbon fibre reinforced plastic and aluminum single-lap adhesive joints after the transverse pre-impact (2020) (21)
Crashworthiness design of functionally graded structures with variable diameters (2017) (19)
Failure analysis for resistance spot welding in lap-shear specimens (2014) (19)
Corrosion behavior of chromium and oxygen plasma-modified magnesium in sulfate solution and simulated body fluid (2012) (19)
A novel specimen design to establish the forming limit diagram (FLD) for GFRP through stamping test (2020) (18)
Parallelized multiobjective efficient global optimization algorithm and its applications (2020) (18)
Nondestructive characterization of bone tissue scaffolds for clinical scenarios. (2019) (18)
On multiaxial failure behavior of closed-cell aluminum foams under medium strain rates (2021) (17)
A time-dependent mechanobiology-based topology optimization to enhance bone growth in tissue scaffolds. (2021) (17)
Additively manufactured fiber-reinforced composites: a review of mechanical behavior and opportunities (2022) (17)
Vibration-based damage identification in composite plates using 3D-DIC and wavelet analysis (2022) (16)
Identification of Material Parameters for High Strength Steel Under Impact Loading (2011) (16)
On functionally-graded crashworthy shape of conical structures for multiple load cases (2017) (15)
Multiobjective discrete optimization using the TOPSIS and entropy method for protection of pedestrian lower extremity (2020) (15)
On the effects of temperature on tensile behavior of carbon fiber reinforced epoxy laminates (2021) (14)
Digital image correlation (DIC) based damage detection for CFRP laminates by using machine learning based image semantic segmentation (2022) (14)
Fracture modeling of brittle biomaterials by the phase-field method (2020) (14)
On design of carbon fiber reinforced plastic (CFRP) laminated structure with different failure criteria (2021) (13)
Mechanical characterization and numerical modeling on the yield and fracture behaviors of Polymethacrylimide (PMI) foam materials (2021) (13)
Optimization Design of Multi-objective Particle Swarm in Crashworthiness Based on Sequential Response Surface Method (2009) (12)
On quasi-static behaviors of different joint methods for connecting carbon fiber reinforce plastic (CFRP) laminate and aluminum alloy (2021) (11)
Parallelized optimization design of bumper systems under multiple low-speed impact loads (2021) (11)
Experimental study for rubber pad forming process of AZ31 magnesium alloy sheets at warm temperature (2017) (11)
Experimental investigation into stamping of woven CF/PP laminates: Influences of molding temperature on thermal, mesoscopic and macroscopic properties (2021) (11)
Characterization of advanced drive system for hybrid electric vehicles (2010) (10)
Multi-Disciplinary Optimization for Multi-Objective Uncertainty Design of Thin Walled Beams (2010) (10)
Modal identification of vibrating structures using singular value decomposition and nonlinear iteration based on high-speed digital image correlation (2021) (10)
Tensile behavior and microstructural evolution for AZ31 magnesium alloys sheet at high strain rate (2017) (9)
Fatigue behavior of CFRP/Al adhesive joints — Failure mechanisms study using digital image correlation (DIC) technique (2022) (9)
High-impact resistant hybrid sandwich panel filled with shear thickening fluid (2022) (9)
A path-dependent level set topology optimization with fracture criterion (2021) (9)
On design optimization for structural crashworthiness and its state of the art (2016) (9)
Machine learning based topology optimization of fiber orientation for variable stiffness composite structures (2021) (9)
On strain rate and temperature dependent mechanical properties and constitutive models for additively manufactured polylactic acid (PLA) materials (2022) (8)
A Modified Approach to Modeling of Diffusive Transformation Kinetics from Nonisothermal Data and Experimental Verification (2016) (8)
Measurement of fracture parameters based upon digital image correlation and virtual crack closure techniques (2021) (8)
Sensitivity-Based Parameter Calibration and Model Validation Under Model Error (2018) (8)
Nondeterministic multi-objective and multi-case discrete optimization of functionally-graded front-bumper structures for pedestrian protection (2021) (8)
Implicit Integration of the Unified Yield Criterion in the Principal Stress Space (2019) (8)
On lower confidence bound improvement matrix-based approaches for multiobjective Bayesian optimization and its applications to thin-walled structures (2021) (8)
Sheet Metal Forming Based Six Sigma Robust Optimization Design (2008) (8)
Effect of different implant configurations on biomechanical behavior of full-arch implant-supported mandibular monolithic zirconia fixed prostheses. (2019) (7)
On characterization of cohesive zone model (CZM) based upon digital image correlation (DIC) method (2021) (7)
Application of Multi-objective Particle Swarm Optimization in Sheet Metal Forming (2009) (6)
Phase field fracture in elasto-plastic solids: Incorporating phenomenological failure criteria for ductile materials (2022) (6)
Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorption (2023) (5)
On fatigue failure prediction of prosthetic devices through XFEM analysis (2021) (5)
Application in Sheet Metal Forming Optimization Based on Variable Complexity Model of Metamodeling Technique (2009) (5)
On quasi-static large deflection of single lap joints under transverse loading (2022) (5)
Steady and dynamic performance analyses of a linear induction machine (2010) (5)
Injury biomechanics-based nondeterministic optimization of front-end structures for safety in pedestrian–vehicle impact (2021) (5)
Experimental study on interface failure behavior of 3D printed continuous fiber reinforced composites (2022) (5)
Investigation into multiaxial mechanical behaviors of Kelvin and Octet-B polymeric closed-cell foams (2022) (4)
Crashworthiness design of vehicle structure with tailor rolled blank (2015) (4)
Development of a novel identification platform for automotive dampers (2014) (4)
Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes (2022) (3)
Reliability-based design optimization of vehicle front-end structure for pedestrian lower extremity protection (2015) (3)
Thermal effects in magnetic pulse forming of magnesium alloy sheet (2015) (3)
The coupled thermo-mechanical-microstructural finite element modeling of hot stamping process in 22MnB5 steel (2013) (3)
Correlation between kinematics and biomechanics of helmeted head under different impact conditions (2022) (2)
Lightweight design of vehicle structure with tailor rolled blank under crashworthiness (2015) (2)
On safety design of vehicle for protection of vulnerable road users: A review (2023) (2)
Concurrent optimization of topological configuration and continuous fiber path for composite structures — A unified level set approach (2022) (2)
Experimental Study on Crushing Resistance of Square CFRP Frusta under Axial Loading (2019) (2)
High-temperature and dynamic mechanical characterization of closed-cell aluminum foams (2022) (2)
Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models (2012) (2)
Multiobjective reliability-based optimization for crashworthy structures coupled with metal forming process (2017) (2)
Multiobjective optimization design for vehicle occupant restraint system under frontal impact (2012) (1)
Longitudinal bending of corrugated sandwich panels with cores of various shapes (2022) (1)
Multi-objective Reliability-Based Design Optimization for Energy Absorption Components Considering Manufacturing Effects (2017) (1)
An Analysis of the Transient Heat Conduction for Plates with the Functionally Graded Material Using the Hybrid Numerical Method (2010) (1)
Structural Design for Pedestrian Lower Leg Protection Using Successive Taguchi Method (2020) (1)
On correlation of stamping process with fiber angle variation and structural performance of thermoplastic composites (2022) (1)
Development and validation of fe models for long bones of lower limb in vehicle-to-pedestrian crashes (2011) (1)
Computational design analysis for deployment of cardiovascular stents (2010) (1)
Design, analysis, and assessment of energy absorbers (2018) (0)
Multiaxial mechanical characterization of additively manufactured open-cell Kelvin foams (2022) (0)
Thermal effects in magnetic pulse forming of magnesium alloy sheet (2015) (0)
A modified two-variable expansion method for a nonlinear Jerk equation (2012) (0)
Guest Editorial: Extreme Engineering (2023) (0)
Crashworthiness design of multi-component tailor-welded blank (TWB) structures (2013) (0)
Multi-objective and multi-case reliability-based design optimization for tailor rolled blank (TRB) structures (2016) (0)
Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodel (2013) (0)
QUASI-STATIC CRUSHING OF DIFFERENT CONFIGURATIONS OF METAL-COMPOSITES HYBRID TUBES UNDER AXIAL/LATERAL LOADING (2017) (0)
Parallelized multiobjective efficient global optimization algorithm and its applications (2020) (0)
A Comparative study on multiobjective reliable and robust optimization for crashworthiness design of vehicle structure (2013) (0)
Fatigue optimization with combined ensembles of surrogate modeling for a truck cab (2014) (0)
Experimental study for rubber pad forming process of AZ31 magnesium alloy sheets at warm temperature (2016) (0)
Experimental and numerical research on process formability in magnetic pulse forming of AZ31 magnesium alloy sheets (2015) (0)
Correction to: Phase field fracture in elasto-plastic solids: a length-scale insensitive model for quasi-brittle materials (2021) (0)
Identification of mechanical properties of the weld line by combining 3D digital image correlation with inverse modeling procedure (2014) (0)
Research on the whole tool mesh reconstruction in the process of springback compensation for auto-body panels (2018) (0)
On functionally-graded crashworthy shape of conical structures for multiple load cases (2017) (0)
Topographical design of stiffener layout for plates against blast loading using a modified ant colony optimization algorithm (2018) (0)
Configurational optimization of multi-cell topologies for multiple oblique loads (2017) (0)
Crashworthiness investigation for functionally graded thickness (FGT) circular column (2014) (0)
A New NURBS Tool Path Generation Algorithm for Precise Sculptured Surface Machining (2010) (0)
Research on the whole tool mesh reconstruction in the process of springback compensation for auto-body panels (2016) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Guang-yong Sun?

Guang-yong Sun is affiliated with the following schools:

Hunan University

Guang-yong Sun's Academic­Influence.com Rankings

Guang-yong Sun's Degrees

Why Is Guang-yong Sun Influential?

Guang-yong Sun's Published Works

Published Works

What Schools Are Affiliated With Guang-yong Sun?

Guang-yong Sun's AcademicInfluence.com Rankings