Haijiang Henry Wang

Haijiang Henry Wang's AcademicInfluence.com Rankings

Haijiang Henry Wang

Chemistry

#4624

World Rank

#5710

Historical Rank

Chemical Engineering

#599

World Rank

#619

Historical Rank

Physical Chemistry

#712

World Rank

#767

Historical Rank

chemistry Degrees

Download Badge

Chemistry

Haijiang Henry Wang's Degrees

PhD Chemical Engineering University of California, Berkeley
Masters Chemical Engineering University of California, Berkeley
Bachelors Chemical Engineering University of California, Berkeley

Why Is Haijiang Henry Wang Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Haijiang Henry Wang's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

A review of anode catalysis in the direct methanol fuel cell (2006) (1571)
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies (2008) (1280)
A review of Fe-N/C and Co-N/C catalysts for the oxygen reduction reaction (2008) (981)
High temperature PEM fuel cells (2006) (949)
Carbon-supported Pt-based alloy electrocatalysts for the oxygen reduction reaction in polymer electrolyte membrane fuel cells: particle size, shape, and composition manipulation and their impact to activity. (2015) (924)
A review of PEM hydrogen fuel cell contamination: Impacts, mechanisms, and mitigation (2007) (891)
A review of water flooding issues in the proton exchange membrane fuel cell (2008) (843)
A review of polymer electrolyte membranes for direct methanol fuel cells (2007) (820)
AC impedance technique in PEM fuel cell diagnosis—A review (2007) (584)
A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells (2009) (556)
A review on air cathodes for zinc–air fuel cells (2010) (485)
Progress in preparation of non-noble electrocatalysts for PEM fuel cell reactions (2006) (469)
Degradation of polymer electrolyte membranes (2006) (463)
A review of accelerated stress tests of MEA durability in PEM fuel cells (2009) (459)
Iron-facilitated dynamic active-site generation on spinel CoAl2O4 with self-termination of surface reconstruction for water oxidation (2019) (439)
A review of heat-treatment effects on activity and stability of PEM fuel cell catalysts for oxygen reduction reaction (2007) (377)
Progress in the synthesis of carbon nanotube- and nanofiber-supported Pt electrocatalysts for PEM fuel cell catalysis (2006) (376)
Highly active and durable core-corona structured bifunctional catalyst for rechargeable metal-air battery application. (2011) (368)
A Spectroscopic Study on the Nitrogen Electrochemical Reduction Reaction on Gold and Platinum Surfaces. (2018) (363)
A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells (2009) (333)
Diagnostic tools in PEM fuel cell research: Part I Electrochemical techniques (2008) (325)
Electrochemical Impedance Spectroscopy in PEM Fuel Cells (2010) (297)
A review of polymer electrolyte membrane fuel cell durability test protocols (2011) (276)
Electrochemical Impedance Spectroscopy in PEM Fuel Cells: Fundamentals and Applications (2009) (251)
A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: Causes, consequences, and mitigation strategies (2012) (232)
A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies (2017) (219)
Architecture for portable direct liquid fuel cells (2006) (203)
PEM fuel cell open circuit voltage (OCV) in the temperature range of 23 °C to 120 °C (2006) (201)
High rate membrane-less microbial electrolysis cell for continuous hydrogen production (2009) (196)
PEM fuel cell relative humidity (RH) and its effect on performance at high temperatures (2008) (175)
PEM fuel cell reaction kinetics in the temperature range of 23–120 °C (2007) (167)
Manganese dioxide nanotube and nitrogen-doped carbon nanotube based composite bifunctional catalyst for rechargeable zinc-air battery (2012) (159)
Magneli phase Ti4O7 electrode for oxygen reduction reaction and its implication for zinc-air rechargeable batteries (2010) (143)
AC impedance diagnosis of a 500 W PEM fuel cell stack ☆: Part I: Stack impedance (2006) (137)
Progress in modified carbon support materials for Pt and Pt-alloy cathode catalysts in polymer electrolyte membrane fuel cells (2016) (133)
Nitrogen-doped carbon nanotubes with high activity for oxygen reduction in alkaline media (2011) (133)
Electrochemical Nitrogen Reduction Reaction on Ruthenium (2019) (129)
Current status of ab initio quantum chemistry study for oxygen electroreduction on fuel cell catalysts (2006) (129)
Diagnostic tools in PEM fuel cell research: Part II (2008) (126)
PEM electrolysis for hydrogen production: principles and applications (2015) (123)
PEM fuel cells operated at 0% relative humidity in the temperature range of 23–120 °C (2007) (117)
Biocatalyzed hydrogen production in a continuous flow microbial fuel cell with a gas phase cathode (2008) (115)
Proton exchange membrane fuel cell degradation under close to open-circuit conditions: Part I: In situ diagnosis (2010) (113)
Experimental measurements of effective diffusion coefficient of oxygen–nitrogen mixture in PEM fuel cell diffusion media (2010) (112)
AC impedance diagnosis of a 500 W PEM fuel cell stack (2006) (108)
Nitrogen-doped carbon nanotubes as air cathode catalysts in zinc-air battery (2011) (105)
Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells (2021) (96)
Synthesis and characterization of high-density LiFePO4/C composites as cathode materials for lithium-ion batteries (2009) (95)
The effect of nitrogen oxides in air on the performance of proton exchange membrane fuel cell (2006) (94)
Degradation of a polymer exchange membrane fuel cell stack with Nafion® membranes of different thicknesses: Part I. In situ diagnosis (2010) (90)
Accelerated durability testing via reactants relative humidity cycling on PEM fuel cells (2012) (88)
Hydrogen production in a microbial electrolysis cell with nickel-based gas diffusion cathodes (2010) (85)
Effects of open-circuit operation on membrane and catalyst layer degradation in proton exchange membrane fuel cells (2010) (84)
Temperature Dependent Performance and In Situ AC Impedance of High-Temperature PEM Fuel Cells Using the Nafion-112 Membrane (2006) (81)
High Pt loading on functionalized multiwall carbon nanotubes as a highly efficient cathode electrocatalyst for proton exchange membrane fuel cells (2011) (77)
Highly durable and active non-precious air cathode catalyst for zinc air battery (2011) (77)
Highly active and stable ruthenate pyrochlore for enhanced oxygen evolution reaction in acidic medium electrolysis (2019) (75)
A review of accelerated conditioning for a polymer electrolyte membrane fuel cell (2011) (75)
A review of all‐vanadium redox flow battery durability: Degradation mechanisms and mitigation strategies (2019) (73)
An air-cooled proton exchange membrane fuel cell with combined oxidant and coolant flow (2009) (71)
Model for the contamination of fuel cell anode catalyst in the presence of fuel stream impurities (2005) (67)
Magnetic resonance imaging of water content across the Nafion membrane in an operational PEM fuel cell. (2008) (67)
Liquid methanol concentration sensors for direct methanol fuel cells (2006) (66)
Electrocatalytic Activities of La0.6Ca0.4CoO3 and La0.6Ca0.4CoO3-Carbon Composites Toward the Oxygen Reduction Reaction in Concentrated Alkaline Electrolytes (2011) (65)
Diagnosis of MEA degradation under accelerated relative humidity cycling (2011) (64)
FeS/C composite as high-performance anode material for alkaline nickel–iron rechargeable batteries (2015) (63)
In Situ Experimental Technique for Measurement of Temperature and Current Distribution in Proton Exchange Membrane Fuel Cells (2006) (62)
Degradation of a PEM fuel cell stack with Nafion® membranes of different thicknesses. Part II: Ex situ diagnosis (2012) (61)
PEM Fuel Cell Fundamentals (2008) (60)
Durability of PEM fuel cell cathode in the presence of Fe3+ and Al3+ (2010) (59)
Gas–liquid two-phase flow patterns in parallel channels for fuel cells (2008) (57)
In situ accelerated degradation of gas diffusion layer in proton exchange membrane fuel cell: Part I: Effect of elevated temperature and flow rate (2010) (52)
A Spectroscopic Study of Electrochemical Nitrogen and Nitrate Reduction on Rhodium Surfaces (2020) (51)
Highly active Pt–Ru nanowire network catalysts for the methanol oxidation reaction (2012) (49)
Molecular simulation of gas adsorption, diffusion, and permeation in hydrated Nafion membranes. (2011) (49)
Current mapping of a proton exchange membrane fuel cell with a segmented current collector during the gas starvation and shutdown processes (2012) (48)
Experimental investigation and performance analysis on a group of multi-effect tubular solar desalination devices (2013) (48)
Low Pt content Pt–Ru–Ir–Sn quaternary catalysts for anodic methanol oxidation in DMFC (2007) (47)
Chloride contamination effects on proton exchange membrane fuel cell performance and durability (2011) (47)
Synthesis and characterization of high-density non-spherical Ni(OH)2 cathode material for Ni–MH batteries (2010) (45)
Synthesis and characterization of quaternary PtRuIrSn/C electrocatalysts for direct ethanol fuel cells (2010) (44)
Gas–liquid two-phase flow distributions in parallel channels for fuel cells (2009) (44)
Temperature and pH Dependence of Oxygen Reduction Catalyzed by Iron Fluoroporphyrin Adsorbed on a Graphite Electrode (2005) (44)
Electrochemical Synthesis of Ammonia from Nitrogen Under Mild Conditions: Current Status and Challenges (2020) (44)
Synthesis and characterization of high-density non-spherical Li(Ni1/3Co1/3Mn1/3)O2 cathode material for lithium ion batteries by two-step drying method (2008) (43)
Diagnosis of contamination introduced by ammonia at the cathode in a polymer electrolyte membrane fuel cell (2012) (43)
Molybdenum carbide coated 316L stainless steel for bipolar plates of proton exchange membrane fuel cells (2019) (43)
Design and testing of a passive planar three-cell DMFC (2007) (43)
A comparative study of structural and electrochemical properties of high-density aluminum substituted α-nickel hydroxide containing different interlayer anions (2015) (43)
Alkali Doped Poly(vinyl alcohol) (PVA) for Anion-exchange Membrane Fuel Cells: Ionic Conductivity, Chemical Stability and FT-IR Characterizations (2010) (42)
Bipolar Plates for PEM Fuel Cells-From Materials to Processing (2006) (42)
Synthesis, characterization and electrochemical performance of high-density aluminum substituted α-nickel hydroxide cathode material for nickel-based rechargeable batteries (2014) (40)
Comparative structural and electrochemical study of high density spherical and non-spherical Ni(OH) (2011) (40)
Effect of operating parameters and anode diffusion layer on the direct ethanol fuel cell performance (2011) (39)
Chromium Oxynitride Electrocatalysts for Electrochemical Synthesis of Ammonia Under Ambient Conditions (2018) (39)
Synthesis of Ordered Intermetallic PtBi2 Nanoparticles for Methanol-Tolerant Catalyst in Oxygen Electroreduction (2006) (39)
The synthesis of Li(Ni1/3Co1/3Mn1/3)O2 using eutectic mixed lithium salt LiNO3–LiOH (2009) (39)
Oxygen vacancy engineering of yttrium ruthenate pyrochlores as an efficient oxygen catalyst for both proton exchange membrane water electrolyzers and rechargeable zinc-air batteries (2020) (37)
Measurement of water transport rates across the gas diffusion layer in a proton exchange membrane fuel cell, and the influence of polytetrafluoroethylene content and micro-porous layer (2009) (36)
Green, scalable and morphology controlled synthesis of nanofibrous covalent organic frameworks and their nanohybrids through a vapor-assisted solid-state approach (2014) (34)
Synthesis of γ-CoOOH and its effects on the positive electrodes of nickel batteries (2009) (33)
Facile and Nonradiation Pretreated Membrane as a High Conductive Separator for Li-Ion Batteries. (2015) (33)
A Spectroscopic Study of Nitrogen and Nitrate Electrochemical Reduction on Rhodium Surfaces. (2020) (32)
Electrochemical Compression Technologies for High-Pressure Hydrogen: Current Status, Challenges and Perspective (2020) (32)
Application of water barrier layers in a proton exchange membrane fuel cell for improved water manag (2011) (32)
Electrochemical Performance of Carbon-Supported Co-Phthalocyanine Modified with Co-Added Metals (M = Fe, Co, Ni, V) for Oxygen Reduction Reaction (2012) (31)
Accelerated conditioning for a proton exchange membrane fuel cell (2012) (31)
Gas–liquid two-phase flow behavior in minichannels bounded with a permeable wall (2011) (30)
Electrochemical performance of solid sphere spinel LiMn2O4 with high tap density synthesized by porous spherical Mn3O4 (2014) (30)
Facile synthesis of LiAl0.1Mn1.9O4 as cathode material for lithium ion batteries: towards rate and cycling capabilities at an elevated temperature (2014) (30)
Influence of annealing temperature on the structure and electrochemical performance of the Fe3O4 anode material for alkaline secondary batteries (2015) (30)
Facile synthesis of high tap density ZnO microspheres as advanced anode material for alkaline nickel-zinc rechargeable batteries (2015) (29)
Spatial and temporal mapping of water content across Nafion membranes under wetting and drying conditions. (2008) (28)
Impacts of operating conditions on the effects of chloride contamination on PEM fuel cell performance and durability (2012) (28)
PEM fuel cell cathode contamination in the presence of cobalt ion (Co2 (2010) (28)
Influence of Surface Oxygen Vacancies and Ruthenium Valence State on the Catalysis of Pyrochlore Oxides. (2020) (28)
Scalable Synthesis of a Ruthenium-Based Electrocatalyst as a Promising Alternative to Pt for Hydrogen Evolution Reaction. (2018) (27)
Effect of open circuit voltage on degradation of a short proton exchange membrane fuel cell stack with bilayer membrane configurations (2012) (27)
Low temperature pyrolyzed cobalt tetramethoxy phenylporphyrin catalyst and its applications as an improved catalyst for metal air batteries (2010) (26)
Facile fabrication of LiMn2O4 microspheres from multi-shell MnO2 for high-performance lithium-ion batteries (2014) (26)
PEM Fuel Cell Contamination: Effects of Operating Conditions on Toluene-Induced Cathode Degradation (2009) (26)
Microwave heated polyol synthesis of carbon supported PtAuSn/C nanoparticles for ethanol electrooxidation (2010) (25)
An Approach towards Synthesis of Nanoarchitectured LiNi1/3Co1/3Mn1/3O2 Cathode Material for Lithium Ion Batteries (2015) (24)
Measurement of the water transport rate in a proton exchange membrane fuel cell and the influence of the gas diffusion layer (2008) (24)
Ex situ study of chloride contamination on carbon supported Pt catalyst (2012) (24)
Effect of metal particle size and Nafion content on performance of MEA using Ir-V/C as anode catalyst (2010) (24)
Tungsten Carbide Encapsulated in Grape-Like N-Doped Carbon Nanospheres: One-Step Facile Synthesis for Low-Cost and Highly Active Electrocatalysts in Proton Exchange Membrane Water Electrolyzers. (2019) (24)
Effects of Modifiers on the Growth, Photosynthesis, and Antioxidant Enzymes of Cotton Under Cadmium Toxicity (2019) (23)
Glucose-Assisted Synthesis of Highly Dispersed LiMnPO4 Nanoparticles at a Low Temperature for Lithium Ion Batteries (2016) (22)
Benchmarking Phases of Ruthenium Dichalcogenides for Electrocatalysis of Hydrogen Evolution: Theoretical and Experimental Insights. (2021) (22)
Mo modulation effect on the hydrogen binding energy of hexagonal-close-packed Ru for hydrogen evolution (2019) (21)
Synthesis of a highly active carbon-supported Ir–V/C catalyst for the hydrogen oxidation reaction in PEMFC (2009) (21)
A general model for air-side proton exchange membrane fuel cell contamination (2009) (21)
Microscopic Investigation of Platinum Deposition in PEMFC Cross-Sections Using AFM and SEM (2013) (20)
Microbial fuel cell operation on carbon monoxide: Cathode catalyst selection (2011) (19)
Glucose assisted synthesis of hollow spindle LiMnPO4/C nanocomposites for high performance Li-ion batteries (2015) (19)
Increasing the Electrolyte Capacity of Alkaline Zn–Air Fuel Cells by Scavenging Zincate with Ca(OH)2 (2015) (19)
Effects of precursor treatment with reductant or oxidant on the structure and electrochemical properties of LiNi0.5Mn1.5O4 (2010) (18)
A Novel Approach to Fabricate Membrane Electrode Assembly by Directly Coating the Nafion Ionomer on Catalyst Layers for Proton-Exchange Membrane Fuel Cells (2020) (18)
Synthesis and electrochemical properties of high performance polyhedron sphere like lithium manganese oxide for lithium ion batteries (2015) (18)
Molecular Simulation of Gas Transport in Hydrated Nafion Membranes: Influence of Aqueous Nanostructure (2012) (18)
Membrane electrode assembly degradation under idle conditions via unsymmetrical reactant relative humidity cycling (2012) (18)
Regulation of the discharge reservoir of negative electrodes in Ni–MH batteries by using Ni(OH)x (x = 2.10) and γ-CoOOH (2011) (18)
Effect of Co2+ on oxygen reduction reaction catalyzed by Pt catalyst, and its implications for fuel cell contamination (2010) (17)
Effects of precursor treatment on the structure and electrochemical properties of spinel LiMn2O4 cathode (2013) (17)
Hexagonal-layered Na0.7MnO2.05 via solvothermal synthesis as an electrode material for aqueous Na-ion supercapacitors (2016) (17)
Effects of γ-CoOOH coating on the high-temperature and high-rate performances of spherical nickel hydroxide electrodes (2014) (17)
Carbon gel assisted low temperature liquid-phase synthesis of C-LiFePO4/graphene layers with high rate and cycle performances (2015) (17)
Study of relative humidity on durability of the reversal tolerant proton exchange membrane fuel cell anode using a segmented cell (2020) (17)
Electrocatalytic Activity of Non-Stoichiometric Perovskites toward Oxygen Reduction Reaction in Alkaline Electrolytes (2011) (16)
Facile synthesis of a triptycene‐based porous organic polymer with a high efficiency and recyclable adsorption for organic dyes (2019) (16)
Sodium tungstate as electrolyte additive to improve high-temperature performance of nickel–metal hydride batteries (2013) (16)
Synthesis and performance of high tap density LiFePO4/C cathode materials doped with copper ions (2010) (16)
PEM Fuel Cell Diagnostic Tools (2018) (16)
Preparation of Li(Ni1/3Co1/3Mn1/3)O2 by spherical Ni1/3Mn1/3Co1/3OOH at a low temperature (2008) (15)
Synthesis of LiNi1/3Co1/3Al1/3O2 cathode material with eutectic molten salt LiOH-LiNO3 (2011) (15)
Synthesis of high-purity LiMn2O4 with enhanced electrical properties from electrolytic manganese dioxide treated by sulfuric acid-assisted hydrothermal method (2013) (15)
Effect of different solvent ratio (ethylene glycol/water) on the preparation of Pt/C catalyst and its activity toward oxygen reduction reaction (2015) (15)
Study of failure mechanisms of the reversal tolerant fuel cell anode via novel in-situ measurements (2020) (14)
Synthesis of CoO/Reduced Graphene Oxide Composite as an Alternative Additive for the Nickel Electrode in Alkaline Secondary Batteries (2015) (14)
An effective strategy to tune the oxygen vacancy of pyrochlore oxides for electrochemical energy storage and conversion systems (2020) (14)
Enhancement of the high-temperature performance of advanced nickel–metal hydride batteries with NaOH electrolyte containing NaBO2 (2013) (13)
Gas flow rate distributions in parallel minichannels for polymer electrolyte membrane fuel cells: Experiments and theoretical analysis (2010) (13)
Perforated Metal Sheets as Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells (2012) (13)
Synthesis and properties of high tap-density cathode material for lithium ion battery by the eutectic molten-salt method (2008) (12)
Calcium metaborate as a cathode additive to improve the high-temperature properties of nickel hydroxide electrodes for nickel–metal hydride batteries (2014) (12)
Synthesis and Characterization of Nonspherical LiCoO2 with High Tap Density by Two-Step Drying Method (2008) (12)
NaCl template-directed approach to ultrathin lamellar molybdenum phosphide-carbon hybrids for efficient hydrogen production (2019) (11)
Synthesis and properties of LiMn2O4 from hydrazine hydrate reduced electrolytic manganese dioxide (2013) (11)
3D-printed fuel-cell bipolar plates for evaluating flow-field performance (2020) (11)
Effects of different electrolytes containing Na2WO4 on the electrochemical performance of nickel hydroxide electrodes for nickel–metal hydride batteries (2014) (11)
Enhanced electrochemical performance of high-density Al-substituted α-nickel hydroxide by a novel anion exchange method using NaCl solution (2015) (11)
FTIR and electrochemical observation of water content reduction in a thin Nafion® film induced by an impregnation of metal complex cations (2005) (10)
Atomic force microscopy and infrared analysis of aging processes of polymer electrolyte membrane fuel cell components (2011) (10)
A green and scalable method for producing high-performance polyimide aerogels using low-boiling-point solvents and sublimation drying (2016) (10)
Erratum: In Situ Experimental Technique for Measurement of Temperature and Current Distribution in Proton Exchange Membrane Fuel Cells [ Electrochem. Solid-State Lett. , 9 , A507 (2006) ] (2006) (10)
Bi-modal water transport behavior across a simple Nafion membrane (2011) (10)
Synthesis and Electrochemical Properties of High Density LiNi0.8Co0.2 − x Ti x O2 for Lithium-Ion Batteries (2009) (10)
Effects of different Ni(OH)2 precursors on the structure and electrochemical properties of NiOOH (2011) (10)
Insights into electrochemical hydrogen compressor operating parameters and membrane electrode assembly degradation mechanisms (2020) (10)
Linear Sweep Voltammetry (2011) (9)
Influence of acidity and auxiliary electrode reaction on the oxidation of epinephrine on the pre-anodized carbon paste electrode (2015) (9)
Gas−Liquid Two-Phase Flow in Minichannels with Liquid Side Introduction (2010) (8)
DMSO-Assisted Liquid-Phase Synthesis of LiFePO4/C Nanocomposites with High-Rate Cycling as Cathode Materials for Lithium Ion Batteries (2011) (8)
Preparation of nickel oxyhydroxide by a new electrolysis method using spherical β-Ni(OH)2 (2010) (8)
A Spectroscopic Study of Nitrogen and Nitrate Electrochemical Reduction on Rhodium Surfaces (2020) (8)
Electron Transfer Reactions. III. The Application of Derivative Cyclic Voltammetry for the Determination of Rate Constants and alpha Values for Heterogeneous Electron Transfer Processes: the Reduction of Organic Anions. (1992) (8)
Construction of crystalline Zn-salphen microporous polymer frameworks and their nanostructured carbons through supramolecular assembly of 1D shape-persistent polymers (2015) (7)
One-pot synthesis of triptycene-based porous organic frameworks with tailored micropore environments for highly efficient and selective amine adsorption (2016) (7)
A highly efficient PtCo/C electrocatalyst for the oxygen reduction reaction (2016) (7)
Synthesis and Electrochemical Properties of High-Density LiNi0.8Co0.2O2 for the Lithium-Ion-Battery Cathode (2008) (6)
Dynamic flow field for fuel cells (2007) (6)
The Effect of the Substitution Pattern on the Protonation Pathways of Dinitrobenzene Dianions in N,N-Dimethylformamide Solution. (1994) (6)
An in situ cross-linked vinylphosphonic acid-modified aminosilicon oxide gel electrolyte for proton exchange membrane fuel cells (2020) (5)
Fuel Cell Diagnostics (2013) (5)
Electrochemical performance of NaCo2O4 as electrode for supercapacitors (2014) (5)
Two-Dimensional Simulations of Gas-Liquid Two-Phase Flow in Mini channels of PEM Fuel Cell Flow Field (2010) (5)
Poly-hydroxyethylidene-1,1-diphosphonic acid (PHEDP) as a highly effective water-retentive and proton-conductive material for low-humidity proton exchange membranes (2020) (5)
Performance of the Vapor Fed Direct Alcohol Phosphoric Acid Fuel Cell (2012) (5)
Engineered Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells (2009) (5)
Microporous expanded polytetrafluoroethylene layer functionalized hydrophilic groups for excellent mechanical durability and superior performance in proton exchange membrane fuel cell (2022) (5)
Reversely swellable porphyrin-linked microporous polyimide networks with super-adsorption for volatile organic compounds (2015) (5)
Optimization of Synthesis Conditions for LiFePO4/C Nanocomposites by Dimethyl Sulfoxide Assisted Solution-Phase Method (2012) (5)
A self-humidifying proton exchange membrane embedded with phosphonic acid-functionalized mesoporous silica nanoparticles that has excellent dispersion and water retention (2021) (4)
Substituent and Solvent Effects on the Rate Constants for the Reactions of 9-Substituted Anthracene Radical Cations with Trinitromethanide. (1995) (4)
New Ir-V-W Electro-Catalyst Exceeding Pt for the Anode of Fuel Cells (2010) (4)
Investigating Separators to Improve Performance of Flat-Plate Microbial Fuel Cells (2012) (4)
Novel Proton Exchange Membrane with Long-Range Acid–Base-Pair Proton Transfer Pathways Based on Functionalized Polyethyleneimine (2021) (4)
Nanoscale Investigation of Nafion Membranes after Artificial Degradation (2009) (4)
Erratum: Temperature and pH Dependence of Oxygen Reduction Catalyzed by Iron Fluoroporphyrin Adsorbed on a Graphite Electrode [ J. Electrochem. Soc. , 152 , A2421 (2005) ] (2006) (3)
Crystal Structures of Hexaaquamagnesium Diliturate Dihydrate, Mg(H2O)6(2+)(C4H2N3O5-)2.2H2O and the Isomorphous Calcium Salt. (1997) (3)
Energy Recovery from Ethanol in Wastewater in a Microbial Fuel Cell (2010) (3)
Proton Exchange Membrane Fuel Cell Testing (2011) (3)
Canada–USA PEM Fuel Cell Network Research Workshop: Report (2009) (3)
| PEM Electrolysis for Hydrogen Production | Taylor & Francis Group (2016) (3)
THE PREPEAK METHOD TO DETERMINE RATE CONSTANTS OF RAPID REACTIONS FOLLOWING CHARGE TRANSFER AT ELECTRODES (1995) (3)
Degradation and diagnostic analysis of gas diffusion layers under humidity cycling (2010) (2)
Pt atoms on doped carbon nanosheets with ultrahigh N content as a superior bifunctional catalyst for hydrogen evolution/oxidation (2021) (2)
Expanded polytetrafluoroethylene functionalized with free radical scavengers and hydrophilic groups for superior chemical stability of proton exchange membranes (2022) (2)
DICATION-NUCLEOPHILE COMBINATION. THE REACTIONS OF 2,6-BIS(N,N-DIMETHYLAMINO)ANTHRACENE DICATION WITH NUCLEOPHILES (1997) (2)
Comment on: Synthesis of ordered intermetallic PtBi2 nanoparticles for methanol-tolerant catalyst in oxygen electroreduction. Authors' reply (2007) (1)
Diagnosis of MEA Failure Modes under Accelerated RH Cycling Conditions (2010) (1)
Electrocatalytic Activity of CoPy/C Catalyst for the Oxygen Reduction Reaction in Alkaline Electrolyte (2011) (1)
Analysis of Aged Polymer Electrolyte Fuel Cell (PEFC) Components by Non Traditional Methods (2011) (1)
Flow Control in a Fuel Cell Flow Field for Improved Performance and Reliability (2006) (1)
The Effect of Tetraalkylammonium Ions and Hydroxy Compounds on the Voltammetric Behavior of Azobenzene in Aprotic Dipolar Solvents. Part A. The Substrate--Anion Radical Redox Couple. (1992) (1)
Investigation of three system shut-down strategies alongside optimization suggestion for proton exchange membrane fuel cells via in-situ measurements (2020) (1)
RATE CONSTANTS AND ACTIVATION ENERGIES FOR THE REACTIONS OF TRIPHENYLMETHYL AND 9-ARYLTHIOXANTHYL RADICALS WITH DIOXYGEN (1997) (1)
PEM Fuel Cell Durability Handbook, Two-Volume Set (2019) (1)
Electrocatalytic Activities of Perovskite toward Oxygen Reduction Reaction in Concentrated Alkaline Electrolytes (2010) (1)
The Effects of Aluminum and Iron Ions on the Degradation of PEMFC Cathode (2010) (1)
THE SEARCH FOR REMOTE SUBSTITUENT EFFECTS ON RADICAL CATION-NUCLEOPHILE COMBINATION REACTIONS (1997) (1)
Reply to Comment on “Synthesis of Ordered Intermetallic PtBi2Nanoparticles for Methanol-Tolerant Catalyst in Oxygen Electroreduction” (2007) (1)
Co-operative project "PEFC durability" of the Canadian National Research Council (NRC) and the German Helmholtz Gesellschaft (HGF) (2009) (0)
Oxygen Vacancy Engineering on Pyrochlore Oxides Catalysts for Electrochemical Energy Storage and Conversion Systems (2020) (0)
Ruthenium Dichalcogenides: Benchmarking Phases of Ruthenium Dichalcogenides for Electrocatalysis of Hydrogen Evolution: Theoretical and Experimental Insights (Small 13/2021) (2021) (0)
Development of Carbon-Supported La0.5Ca0.5CoO3 Material for ORR in Strong Alkaline Electrolytes and Its Implication in Rechargeable Metal-Air Alkaline Batteries (2010) (0)
Investigation of the Degradation of Hydrophobized Carbon Structures in PEFC (2010) (0)
14 Fuel Cells (2010) (0)
Low Temperature Pyrolysed CoTMPP/C and Its Applications as an Improved Catalyst for Metal-Air Batteries/Fuel Cells (2010) (0)
Effects of the Operating Conditions on the Electrical Resistivity of PEM Fuel Cell Components (2010) (0)
(Invited) Nitrogen Electrochemical Reduction Reaction Pathway on Noble Metallic Surfaces (2020) (0)
USING THE WORLD-WIDE COMPUTER NETWORK, INTERNET, IN CHEMICAL SCIENCES (1995) (0)
A Hydrogen Evolution Reaction Catalyst Using Nickel Phosphides with Mixed Crystalline Structure (2016) (0)
Simulation of the Dynamic Characteristics of a PEMFC System in Fluctuating Operating Conditions (2020) (0)
Parametric Studies of the Direct Alcohol Phosphoric Acid Fuel Cell (2010) (0)
Electrocatalyst Stability under Dynamic and Stationary Operation of Fuel Cells (2012) (0)
Current Mapping of a Diagnostic Modeling Cell (2008) (0)
Uncoupling Characteristics of Temperature and Relative Humidity Distribution in a Commercial-Size Polymer Electrolyte Membrane Fuel Cell (2020) (0)
Degradation of Fuel Cell Materials Investigated by Atomic Force Microscopy (2011) (0)
Synthesis and Characterization of Ti4O7 in an Alkaline Solution (2009) (0)
Effect of OH- Concentration on the Kinetics of Oxygen Reduction Catalyzed by Co(II) Fluoro-phthalocyanine Adsorbed on Graphite (2006) (0)
Synthesis and Characterization of Lamellar LiCoO 2 as Cathode Materials for Lithium-Ion Batteries (2010) (0)
Durability and Degradation Analysis of PEMFC under Idle Condition (2009) (0)
Species, Temperature, and Current Distribution Mapping in Polymer Electrolyte Membrane Fuel Cells (2009) (0)
Thermal Behavior and Performance Trajectories of Electrolysers (2018) (0)
Advances in Fabrication, Characterization, Testing, and Diagnosis of High‐Performance Electrodes for PEM Fuel Cells (2011) (0)
Synthesis and Characterization of Lamellar LiCoO2 as Cathode Materials for Lithium-Ion Batteries (2010) (0)
Ex-situ investigation of aged GDLs (2012) (0)
Highly Active and Stable Non-Precious Metal Catalyst for Oxygen Reduction Reaction in Zinc Air Battery Application (2011) (0)
MEA Degradation under OCV in PEM Fuel Cell (2009) (0)
Workshop report: Vancouver to Northeast USA Fuel Cell and Hydrogen Cluster Connection (2008) (0)
Engineered Gas Diffusion Layers for PEM Fuel Cells (2009) (0)
Invited) A Surface Enhanced Infrared Absorption Spectroscopy Study on the Nitrogen Electrochemical Reduction Reaction on Gold Surfaces (2018) (0)
Flat-Plate Microbial Fuel Cell Operation Using Different Ion-Exchange and Size-Selective Separators (2013) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Haijiang Henry Wang?

Haijiang Henry Wang is affiliated with the following schools:

Beijing University of Technology
University of Waterloo
University of British Columbia
Hong Kong University of Science and Technology
Southern University of Science and Technology

Haijiang Henry Wang's Academic­Influence.com Rankings

Haijiang Henry Wang's Degrees

Why Is Haijiang Henry Wang Influential?

Haijiang Henry Wang's Published Works

Published Works

What Schools Are Affiliated With Haijiang Henry Wang?

Haijiang Henry Wang's AcademicInfluence.com Rankings