Helmut Krawinkler
#99,843
Most Influential Person Now
Austrian- born American structural engineer
Helmut Krawinkler's AcademicInfluence.com Rankings
Helmut Krawinklerengineering Degrees
Engineering
#2809
World Rank
#3790
Historical Rank
#880
USA Rank
Civil Engineering
#374
World Rank
#442
Historical Rank
#50
USA Rank
Applied Physics
#2552
World Rank
#2593
Historical Rank
#221
USA Rank
Download Badge
Engineering
Helmut Krawinkler's Degrees
- PhD Civil Engineering Stanford University
- Masters Civil Engineering Stanford University
Why Is Helmut Krawinkler Influential?
(Suggest an Edit or Addition)According to Wikipedia, Helmut Krawinkler was an Austrian-born American structural engineer. Krawinkler was a native of Innsbruck, Austria, born on April 6, 1940. He earned an undergraduate degree from the Vienna University of Technology in 1964. Krawinkler then completed a master's degree at California State University San Jose, funded by a Fulbright Scholarship between 1965 and 1967. In 1971, he graduated from the University of California, Berkeley with a doctorate and became an assistant research engineer at Berkeley. After a year as lecturer at California State University, Krawinkler joined the Stanford University faculty in 1973.
Helmut Krawinkler's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Hysteretic models that incorporate strength and stiffness deterioration (2005) (1363)
- PROS AND CONS OF A PUSHOVER ANALYSIS OF SEISMIC PERFORMANCE EVALUATION (1998) (744)
- Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake Loading (2011) (709)
- Behavior of moment‐resisting frame structures subjected to near‐fault ground motions (2004) (414)
- SHEAR IN BEAM - COLUMN JOINTS IN SEISMIC DESIGN OF STEEL FRAMES (1978) (274)
- Cumulative damage in steel structures subjected to earthquake ground motions (1983) (260)
- Assessment of probability of collapse and design for collapse safety (2007) (244)
- Development of a testing protocol for woodframe structures (1999) (232)
- An efficient method for estimating the collapse risk of structures in seismic regions (2013) (226)
- Prediction and validation of sidesway collapse of two scale models of a 4‐story steel moment frame (2011) (221)
- Performance-Based Earthquake Engineering (2004) (216)
- Seismic design based on ductility and cumulative damage demands and capacities (1992) (205)
- Seismic Demands for Nondeteriorating Frame Structures and Their Dependence on Ground Motions (2003) (187)
- Seismic drift and ductility demands and their dependence on ground motions (2003) (184)
- Effects of Near-Fault Ground Motions on Frame Structures (2001) (166)
- Estimation of seismic drift demands for frame structures (2000) (165)
- CONSIDERATION OF NEAR-FAULT GROUND MOTION EFFECTS IN SEISMIC DESIGN (2000) (154)
- Theory and application of experimental model analysis in earthquake engineering (1981) (153)
- Design Concepts for Controlled Rocking of Self-Centering Steel-Braced Frames (2014) (140)
- Development and Utilization of Structural Component Databases for Performance-Based Earthquake Engineering (2013) (135)
- Behavior of Ductile SMRFs at Various Seismic Hazard Levels (2000) (135)
- Van Nuys Hotel Building Testbed Report: Exercising Seismic Performance Assessment (2005) (134)
- Dynamic P-Delta Effects for Flexible Inelastic Steel Structures (2000) (127)
- Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors | NIST (2010) (120)
- Basic concepts and performance measures in prediction of collapse of buildings under earthquake ground motions (2009) (114)
- Earthquake resilient steel braced frames with controlled rocking and energy dissipating fuses (2011) (109)
- Performance of steel building structures during the Northridge Earthquake (1994) (106)
- Evaluation of Drift Demands for the Seismic Performance Assessment of Frames (2005) (104)
- Decision support for conceptual performance‐based design (2006) (100)
- LOADING HISTORIES FOR CYCLIC TESTS IN SUPPORT OF PERFORMANCE ASSESSMENT OF STRUCTURAL COMPONENTS (2009) (98)
- Quasi-Static Cyclic Behavior of Controlled Rocking Steel Frames (2014) (96)
- Strengthening of moment‐resisting frame structures against near‐fault ground motion effects (2004) (94)
- Nonlinear seismic analysis and design of reinforced concrete buildings (1992) (87)
- A Database in Support of Modeling of Component Deterioration for Collapse Prediction of Steel Frame Structures (2007) (86)
- NEW TRENDS IN SEISMIC DESIGN METHODOLOGY (1995) (78)
- The Mexico Earthquake of September 19, 1985—Behavior of Steel Buildings (1989) (77)
- Variance of collapse capacity of SDOF systems under earthquake excitations (2011) (72)
- Cyclic Loading Histories for Seismic Experimentation on Structural Components (1996) (71)
- Effects of panel zone deformations on seismic response (1987) (68)
- Uniaxial Cyclic Stress-Strain Behavior of Structural Steel (1985) (68)
- Seismic design of steel special moment frames:: a guide for practicing engineers (2009) (67)
- Seismic Design Methodologies for the Next Generation of Codes (2019) (66)
- Evaluation of Seismic Collapse Performance of Steel Special Moment Resisting Frames Using FEMA P695 (ATC-63) Methodology (2010) (64)
- Strength Demand Issues Relevant for the Seismic Design of Moment-Resisting Frames (2005) (58)
- Shear Behavior of Steel Frame Joints (1975) (56)
- Seismic Design and Behavior of Steel Frames with Controlled Rocking—Part I: Concepts and Quasi-Static Subassembly Testing (2010) (54)
- EVALUATION OF P-DELTA EFFECTS IN NON-DETERIORATING MDOF STRUCTURES FROM EQUIVALENT SDOF SYSTEMS (2002) (49)
- Importance of good nonlinear analysis (2006) (47)
- Beam-Column Subassemblages Under Repeated Loading (1972) (46)
- Performance Assessment of Steel Components (1987) (43)
- Seismic Design and Behavior of Steel Frames with Controlled Rocking - Part II: Large Scale Shake Table Testing and System Collapse Analysis (2010) (42)
- Seismic Behavior of Moment Connections and Joints (1982) (40)
- The 1989 Loma Prieta earthquake and its effects: Introduction to the special issue (1991) (39)
- CHALLENGES AND PROGRESS IN PERFORMANCE-BASED EARTHQUAKE ENGINEERING (2001) (38)
- Prediction of collapse—how realistic and practical is it, and what can we learn from it? (2007) (37)
- SIMILITUDE REQUIREMENTS FOR DYNAMIC MODELS (1982) (35)
- Issues and future directions in the use of an energy approach for seismic-resistant of design structures (1992) (33)
- Beijing , China CONTROLLED ROCKING OF STEEL-FRAMED BUILDINGS WITH REPLACEABLE ENERGY-DISSIPATING FUSES (2008) (32)
- Interdisciplinary communication medium for collaborative conceptual building design (1996) (32)
- SEISMIC DESIGN BASED ON STRENGTH AND DUCTILITY DEMANDS (1992) (32)
- Masonry Strengthened with FRP Subjected to Combined Bending and Compression, Part II: Test Results and Model Predictions (2002) (29)
- Conceptual performance‐based seismic design using building‐level and story‐level decision support system (2012) (28)
- SCALE EFFECTS IN STATIC AND DYNAMIC MODEL TESTING OF STRUCTURES (1988) (25)
- On Processing Standards with Predicate Calculus (1989) (24)
- Interpretation Objects for Multi-Disciplinary Design (1994) (24)
- Experimental and analytical studies of innovative prestressed concrete box-girder bridges (2003) (24)
- Effects of near-field ground motion on building structures : CUREE-Kajima Joint Research Program phase III (2001) (24)
- Challenges Towards Achieving Earthquake Resilience Through Performance-Based Earthquake Engineering (2014) (23)
- Loss Estimation of Tall Buildings Designed for the PEER Tall Building Initiative Project (2015) (23)
- Seismic studies on small-scale models of adobe houses (1990) (23)
- Application of Simplified Analysis Procedures for Performance-Based Earthquake Evaluation of Steel Special Moment Frames (2015) (21)
- SHAKING TABLE COLLAPSE TESTS OF TWO SCALE MODELS OF A 4-STORY MOMENT RESISTING STEEL FRAME (2008) (21)
- HYBRID SIMULATION TESTING OF A CONTROLLED ROCKING STEEL BRACED FRAME SYSTEM (2010) (21)
- Reinforced Concrete Buildings (1996) (20)
- Reliability of a 4-Story Steel Moment-Resisting Frame Against Collapse Due to Seismic Excitations (2008) (19)
- An interactive computer assisted system for conceptual structural design of steel buildings (1997) (18)
- NEHRP Seismic Design Technical Brief No. 2 - Seismic Design of Steel Special Moment Frames: A Guide for Practicing Engineers | NIST (2009) (17)
- GLOBAL COLLAPSE OF DETERIORATING MDOF SYSTEMS (2002) (17)
- Guidelines for the Seismic Rehabilitation of Buildings: New Analysis Procedures Developed Specifically for Application with Existing Buildings (1997) (17)
- Seismic Demand Evaluation for a 4‐Story Steel Frame Structure Damaged in the Northridge Earthquake (1996) (16)
- Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design | NIST (2010) (15)
- Structural System Parameter Selection Based on Collapse Potential of Buildings in Earthquakes (2010) (15)
- Computer Assisted Conceptual Structural Design of Steel Buildings (1993) (15)
- Impulsive Direct Shear Failure in RC Slabs (1985) (15)
- Sensitivity of Collapse Potential of Buildings to Variations in Structural Systems and Structural Parameters (2007) (13)
- Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design - Supporting Documentation | NIST (2010) (13)
- A Steel Component Database for Deterioration Modeling of Steel Beams with RBS under Cyclic Loading (2010) (13)
- Significance of Modeling Deterioration in Structural Components for Predicting the Collapse Potential of Structures Under Earthquake Excitations (2010) (12)
- Impact of Near-Fault Pulses on Engineering Design (2005) (12)
- A Simplified Procedure for Performance-Based Design (2007) (12)
- Seismically Resilient Steel Braced Frame Systems with Controlled Rocking and Energy Dissipating Fuses (2009) (11)
- A/E/C Teamwork (1995) (11)
- LARGE DISPLACEMENT EFFECTS ON SEISMICALL Y EXCITED ELASTIC-PLASTIC FRAME STRUCTURES (2004) (10)
- FRP Strengthened Masonry Beams. Part I – Model (2002) (10)
- Why and how to predict the probability of collapse of buildings (2006) (9)
- SMALL-SCALE MODEL TESTS OF STRUCTURAL STEEL ASSEMBLIES (1989) (9)
- Reinforcing Masonry Walls with Composite Materials-Model (2000) (9)
- A formal approach to automating conceptual structural design, part II: Application to floor framing generation (1991) (9)
- Earthquake design and performance of steel structures (1996) (9)
- Qualitative modeling and analysis of lateral load resistance in frames (1993) (8)
- Damage potential of Loma Prieta ground motions (1991) (8)
- Reinforcing Masonry Walls with Composite Materials—Test Results (2000) (7)
- Development of Damage Fragility Functions for URM Chimneys and Parapets (2012) (7)
- Steel Moment Frames with Welded Connections (1996) (7)
- Modeling of component deterioration for collapse prediction of steel moment frames (2009) (6)
- Experimental Studies of Prestressed Concrete Box-Girder Bridges with Corrugated Steel Webs (2003) (6)
- Drift control in moment resisting steel frame structures (1994) (6)
- INFLUENCE OF HYSTERETIC BEHAVIOR ON THE NONLINEAR RESPONSE OF FRAME STRUCTURES (2002) (6)
- Seismic Evaluation of Steel Moment Frames and Shear Walls Using Nonlinear Static Analysis Procedures (2011) (6)
- Steel-Framed Rocking Structural Systems for Moderate Seismic Zones (2009) (6)
- THE SERIES DATABASE OF RC ELEMENTS (2014) (6)
- SYSTEM PERFORMANCE OF STEEL MOMENT RESISTING FRAME STRUCTURES (1999) (5)
- IMPACT OF DURATION/ENERGY IN DESIGN (1997) (5)
- Seismic Assessment of Steel Moment Frames Using Simplified Nonlinear Models (2013) (5)
- A Framework for Performance-Based Seismic Design (2001) (5)
- Prediction of Nonlinear Response—Pushover Analysis versus Simplified Nonlinear Response History Analysis (2011) (5)
- Interdisciplinary Communication of Design Critique in the Conceptual Design Stage (1993) (4)
- Effect of Near-Fault Ground Motions on the Response of Frame Structures (1999) (4)
- Deaggregation of Collapse Risk (2012) (4)
- Toward a Performance-Based Design Framework For Self-Centering Rocking Braced-Frame Spine Systems (2012) (4)
- Controlled Rocking of Steel Frames as a Sustainable New Technology for Seismic Resistance in Buildings (2008) (3)
- A computer‐based design support system for steel frame structures (1994) (3)
- Deformation and Ductility Demands in Steel Moment Frame Structures (1998) (3)
- SEISMIC DEMANDS AND CAPACITIES OF SINGLE-STORY AND LOW-RISE MULTI-STORY WOODFRAME STRUCTURES (2002) (3)
- Seismic Design Modification Factors for Steel SMRFs for Uniform Collapse Safety (2011) (3)
- Pros and cons analysis of seismic evaluation (2003) (3)
- Collapse assessment of multi-story buildings through hybrid testing (2014) (3)
- A Methodology for Automating Conceptual Structural Design (1991) (3)
- Collapse Assessment of Steel Moment Resisting Frames Under Earthquake Shaking (2011) (3)
- Small Scale Model Tests of Structural Components and Assemblies (1984) (3)
- Preliminary evaluation of structures : Whittier Narrows Earthquake of October 1, 1987 (1987) (2)
- Euler's Paper on Statically Indeterminate Analysis (1987) (2)
- Seismic Demand Analysis (2002) (2)
- A formal approach to automating conceptual structural design, Part I: Methology (1991) (2)
- How to Predict the Probability of Collapse of Non-Ductile Building Structures (2009) (2)
- Seismic energy demands on reinforced concrete ductile moment-resisting frame buildings (1992) (2)
- CONTRIBUTIONS TO COLLAPSE PREDICTION OF STEEL MOMENT FRAMES THROUGH RECENT EARTHQUAKE SIMULATOR COLLAPSE TESTS (2009) (2)
- QLRS: An Approach for Qualitative Interpretation of Lateral Load Resisting Systems (1992) (2)
- An energy-based damage model for inelastic dynamic analysis of reinforced concrete frames (1992) (1)
- The 14 th World Conference on Earthquake Engineering October 12-17 , 2008 , Beijing , China PREDICTING COLLAPSE OF FRAME AND WALL STRUCTURES (2008) (1)
- Research issues in performance based seismic engineering (2019) (0)
- Closure of "Beam-Column Subassemblages Under Repeated Loading" (1973) (0)
- A Sketch is Worth a Thousand Rule Traces (1994) (0)
- Automated Generation of Floor Framing Plans for Steel Office Buildings (1991) (0)
- Relating ground motion spectral information to structural deformation demands (2021) (0)
- Structural and Construction Design Manual (1977) (0)
- Expanded papers from an international workshop on performance‐based design—concepts and implementation (2006) (0)
- Earthquake Simulator Study of a Steel Frame Model (1979) (0)
- Selection of Steel Wide Flange Beams in Biaxial Bending (Engineer’s Notebook) (1980) (0)
- Structural System Selection Using Performance-Based Design (2007) (0)
- Call for Papers: ‘Seismic Damage and Loss Assessment in Buildings’ (2011) (0)
- Tech-IQ : Technology Mediated Interdisciplinary Questioning (2007) (0)
- INFLUENCES OF MECHANISM CONTROL FOR REINFORCED CONCRETE FRAME STRUCTURES ON PROCESSES OF DAMAGE AND PROBABILITIES OF COLLAPSE (2005) (0)
- Sidesway Collapse of Deteriorating Structural Systems Under Seismic Excitations (NEES-2005-0084) (2017) (0)
- Cyclic Stress-Strain Model for Metals with High Stacking Fault Energy (1984) (0)
- INFLUENCE OF DIFFERENT TYPES OF FULLY RESTRAINED CONNECTIONS ON THE RESPONSE OF SMRF STRUCTURES (1999) (0)
- BEHAVIOR OF DUCTILE SMRF SA TVARIOUS SEISMIC HAZARD LEVELS (2000) (0)
- The Effect of Belt Truss Level on the Performance of Steel High-Rise Buildings Subjected to Near-Field Earthquakes (2018) (0)
This paper list is powered by the following services:
Other Resources About Helmut Krawinkler
What Schools Are Affiliated With Helmut Krawinkler?
Helmut Krawinkler is affiliated with the following schools:
