Hiroyuki Hamada,
#154,100
Most Influential Person Now
Hiroyuki Hamada,'s AcademicInfluence.com Rankings
Hiroyuki Hamada,chemistry Degrees
Chemistry
#4259
World Rank
#5327
Historical Rank
Chemical Engineering
#525
World Rank
#544
Historical Rank

Download Badge
Chemistry
Hiroyuki Hamada,'s Degrees
- PhD Materials Science and Engineering University of Tokyo
- Masters Chemical Engineering University of Tokyo
- Bachelors Chemical Engineering University of Tokyo
Why Is Hiroyuki Hamada, Influential?
(Suggest an Edit or Addition)Hiroyuki Hamada,'s Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends (2006) (294)
- Renewable resource based biocomposites from natural fiber and polyhydroxybutyrate-co-valerate (PHBV) bioplastic (2008) (187)
- Impact response of woven glass-fabric composites - I. Effect of fibre surface treatment (1998) (161)
- A novel processing technique for thermoplastic manufacturing of unidirectional composites reinforced with jute yarns (2006) (154)
- Performance study of braided carbon/PEEK composite compression bone plates. (2003) (140)
- Comparison of energy absorption of carbon/epoxy and carbon/PEEK composite tubes (1992) (135)
- A study on the failure behavior and mechanical properties of unidirectional fiber reinforced thermosetting and thermoplastic composites (2016) (109)
- Influence of processing conditions on bending property of continuous carbon fiber reinforced PEEK composites (2004) (97)
- Energy Absorption Characteristics of Crash Worthy Structural Composite Materials (1997) (96)
- Initial fracture behavior of satin woven fabric composites (2003) (95)
- Impact response of woven glass-fabric composites - II. Effect of temperature (1998) (89)
- Tensile Properties of Bamboo, Jute and Kenaf Mat-Reinforced Composite (2014) (86)
- Crashworthiness of carbon fiber hybrid composite tubes molded by filament winding (2016) (85)
- A study on the energy absorption properties of carbon/aramid fiber filament winding composite tube (2015) (83)
- Feasibility of knitted carbon/PEEK composites for orthopedic bone plates. (2004) (82)
- Scaling effects in the energy absorption of carbon-fiber/peek composite tubes (1995) (82)
- A comparative study of the mechanical properties and failure behavior of carbon fiber/epoxy and carbon fiber/polyamide 6 unidirectional composites (2017) (79)
- Fabrication Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method (2005) (73)
- Impact and compression-after-impact performance of weft-knitted glass textile composites (2005) (72)
- Impact Property of Flexible Epoxy Treated Natural Fiber Reinforced PLA Composites (2013) (71)
- Mechanical Property of Surface Modified Natural Fiber Reinforced PLA Biocomposites (2013) (70)
- Crushing mechanism of carbon fibre/PEEK composite tubes (1995) (68)
- The V-notch at weld lines in polystyrene injection moldings (1990) (62)
- Natural Fiber Composites (2013) (61)
- Mechanical Properties of Natural Jute Fabric/Jute Mat Fiber Reinforced Polymer Matrix Hybrid Composites (2012) (60)
- The influence of sizing conditions on bending properties of continuous glass fiber reinforced polypropylene composites (2000) (58)
- Effect of Modified Jute Fiber on Mechanical Properties of Green Rubber Composite (2014) (57)
- The mechanical properties of unidirectional thermoplastic composites manufactured by a micro-braiding technique (2000) (57)
- Tensile Properties of Carbon Fiber Triaxial Woven Fabric Composites (1992) (53)
- Fabrication and mechanical properties of aramid/nylon plain knitted composites (2004) (51)
- Effect of interfacial properties and weave structure on mode I interlaminar fracture behaviour of glass satin woven fabric composites (1997) (50)
- Effect of interfacial silane network structure on interfacial strength in glass fibre composites (1994) (50)
- Strength Prediction of Mechanically Fastened Quasi-Isotropic Carbon/Epoxy Joints (1996) (49)
- Effect of compounding procedure on mechanical properties and dispersed phase morphology of poly(lactic acid)/polycaprolactone blends containing peroxide (2007) (47)
- Interfacial Properties of PP/PP Composites (2003) (47)
- Mechanical property and hydrothermal aging of injection molded jute/polypropylene composites (2011) (46)
- Effect of compression process on void behavior in structural resin transfer molding (1996) (44)
- Effect of Compatibilizer on PLA/PP Blend for Injection Molding (2016) (43)
- Correlation between flow mark and internal structure of thin PC/ABS blend injection moldings (1996) (43)
- Influence of micro-structures on bending properties of braided laminated composites (2007) (41)
- Tensile strength and fiber/matrix interfacial properties of 2D- and 3D-carbon/carbon composites (2005) (41)
- Anti-fungal performance and mechanical–morphological properties of PVC and wood/PVC composites under UV-weathering aging and soil-burial exposure (2014) (41)
- Off-axis tensile fatigue assessment based on residual strength for the unidirectional 45° carbon fiber-reinforced composite at room temperature (2016) (40)
- Mechanical properties of textile-inserted PP/PP knitted composites using injection–compression molding (2006) (40)
- The effect of heat sealing temperature on the properties of OPP/CPP heat seal. I. Mechanical properties (2005) (39)
- Energy absorption of braiding pultrusion process composite rods (2002) (38)
- Effect of CF/GF fibre hybrid on impact properties of multi-axial warp knitted fabric composite materials (2009) (36)
- Energy-absorption properties of braided composite rods (2000) (36)
- Effects of the molecular orientation and crystallization on film–substrate interfacial adhesion in poly(ethylene terephthalate) film-insert moldings (2007) (36)
- Computer Simulation of the Deformation of Weft-Knitted Fabrics for Composite Materials (1994) (35)
- Effect of molding parameters on the properties of PP/PP sandwich injection moldings (2005) (33)
- Mechanical Properties of Warp-Knitted, Fabric-Reinforced Composites (1993) (33)
- Effect of Fiber Material on the Energy Absorption Behavior of Thermoplastic Composite Tubes (1996) (33)
- Mechanical performance of glass woven fabric composite: Effect of different surface treatment agents (2016) (33)
- Long jute fiber-reinforced polypropylene composite: Effects of jute fiber bundle and glass fiber hybridization (2015) (33)
- Mechanical Behavior and Fracture Mechanism in Flat Braided Composites. Part 1: Braided Flat Bar (1992) (32)
- Mechanical properties and failure mechanisms of carbon fibre reinforced thermoplastic laminates (1997) (32)
- Effect of crystallization and interface formation mechanism on mechanical properties of film-insert injection-molded poly(propylene) (PP) film/PP substrate (2005) (32)
- Weight changes of a randomly orientated GRP panel in hot water (1993) (32)
- Effect of heat‐sealing temperature on the failure criteria of oriented polypropylene/cast polypropylene heat seal (2006) (31)
- Analytical procedure for the prediction of elastic properties of plain knitted fabric-reinforced composites (1997) (31)
- Measurements and prediction of the compression-after-impact strength of glass knitted textile composites (2004) (31)
- Structural hierarchy developed in co-injection molded polystyrene/polypropylene parts (1999) (30)
- Investigation of the interphase of a silane-finished glass fibre/vinylester resin using a microscopic. FTi.r. spectrometer (1993) (30)
- Mechanical properties and micro-fracture behaviors of flat braided composites with a circular hole (2001) (30)
- Interfacial Shear Strength of Glass Fiber Reinforced Polymer Composites by the Modified Rule of Mixture and Kelly-Tyson Model (2016) (29)
- Effect of hot water on the mechanical performance of unidirectional carbon fiber-reinforced nylon 6 composites (2020) (29)
- Effect of hybrid layers with different silane coupling agents on impact response of glass fabric reinforced vinylester matrix composites (2001) (29)
- The effect of molding conditions on mechanical and morphological properties at the interface of film insert injection molded polypropylene-film/polypropylene matrix (2004) (29)
- A Fem Method for Prediction of Energy Absorption Capability of Crashworthy Polymer Composite Materials (1997) (29)
- Effect of polyurethane dispersion as surface treatment for carbon fabrics on mechanical properties of carbon/Nylon composites (2017) (29)
- Effects of Stacking Sequences on Mechanically Fastened Joint Strength in Quasi-Isotropic Carbon-Epoxy Laminates (1995) (28)
- Compression and injection molding techniques for natural fiber composites (2014) (28)
- Prediction Method for Temporal Change in Fiber Orientation on Cylindrical Braided Preforms (2010) (28)
- Influence of the impregnating property on mechanical properties of commingled yarn composites (1993) (27)
- Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding (2012) (27)
- Compressive failure of unidirectional hybrid fibre-reinforced epoxy composites containing carbon and silicon carbide fibres (2007) (27)
- Effect of the braiding angle on the energy absorption properties of a hybrid braided FRP tube (2005) (26)
- Weight-change analysis of the interphase in hygrothermally aged FRP: Consideration of debonding (1997) (26)
- Compatibilization of recycled poly(ethylene terephthalate) and polypropylene blends: Effect of polypropylene molecular weight on homogeneity and compatibility (2012) (26)
- Influence of polyurethane dispersion as surface treatment on mechanical, thermal and dynamic mechanical properties of laminated woven carbon-fiber-reinforced polyamide 6 composites (2019) (26)
- Crystallization behavior and viscoelasticity of bamboo‐fiber composites (2005) (25)
- Axial crushing performance of braided composite tubes (2005) (25)
- A quasi-three-dimensional lateral compressive analysis method for a composite cylinder (1995) (25)
- Continuous Natural Fiber Reinforced Thermoplastic Composites by Fiber Surface Modification (2013) (25)
- Fractography of fracture in CFRP under compressive load (1997) (24)
- Compatibilization of Recycled Poly(ethylene terephthalate) and Polypropylene Blends: Effect of Compatibilization on Blend Toughness, Dispersion of Minor Phase, and Thermal Stability (2011) (24)
- The Effect of Curative Concentration on Thermal and Mechanical Properties of Flexible Epoxy Coated Jute Fabric Reinforced Polyamide 6 Composites (2012) (24)
- Bolted joints of pultruded sandwich composite laminates (1995) (24)
- Initial fracture of the welt weft-knitted textile composites (2004) (24)
- Fracture toughness of weldlines in thermoplastic injection molding (1993) (23)
- Progressive crushing behaviour of glass/epoxy composite tubes with different surface treatment (1994) (23)
- Interfacial characteristics of film insert molded polycarbonate film/polycarbonate‐acrylonitrile‐butadiene‐styrene substrate, part 1: Influence of substrate molecular weight and film thickness (2006) (22)
- Effects of Reinforcing Fibre Properties on Various Mechanical Behaviors of Unidirectional Carbon/Epoxy Laminates (1996) (22)
- Tensile, flexural and impact properties of jute fibre-based thermosetting composites (2005) (22)
- Corrigendum to “Agro-Residues: Surface Treatment and Characterization of Date Palm Tree Fiber as Composite Reinforcement” (2014) (22)
- Flexural and hydrothermal aging behavior of silk fabric/glass mat reinforced hybrid composites (2016) (21)
- Structure and machine braiding procedure of coupled square braids with various cross sections (2001) (21)
- Evaluation of mechanical properties of adjacent flow weldline (2005) (20)
- The crushing performance of a braided I-beam (1999) (20)
- Effect of surface treatment on crushing behaviour of glass cloth/epoxy composite tubes (1992) (20)
- Mechanical Properties of Hemp Reinforced Poly(butylene succinate) Biocomposites (2008) (20)
- Prediction of flow patterns in the polyurethane foaming process by numerical simulation considering foam expansion (2003) (20)
- Effect of heat‐sealing temperature on the properties of OPP/CPP heat seals. Part II. Crystallinity and thermomechanical properties (2006) (19)
- Strain monitoring of braided composites by using embedded fiber-optic strain sensors (2004) (18)
- Role of Crystallinity on Moisture Absorption and Mechanical Performance of Recycled PET Compounds (2016) (18)
- The effect of ambient moisture and temperature conditions on the mechanical properties of glass fiber/carbon fiber/nylon 6 sandwich hybrid composites consisting of skin‐core morphologies (2005) (18)
- A method to improve the energy absorption capability of fibre-reinforced composite tubes (2009) (18)
- Improvement of weldline strength of fiber reinforced polycarbonate injection molded articles using simultaneous composite injection molding (1995) (17)
- Physical and mechanical properties of injection-molded wood powder thermoplastic composites (2013) (17)
- Higher performance carbon fiber reinforced thermoplastic composites from thermoplastic prepreg technique: Heat and moisture effect (2018) (17)
- Influence of the reactive processing of recycled poly(ethylene terephthalate)/poly(ethylene‐co‐glycidyl methacrylate) blends (2011) (16)
- Hybrid laminated composites molded by spray lay-up process (2015) (16)
- The stress analysis method for three-dimensional composite materials (1994) (16)
- Effect of pellet size and compatibilization on thermal decomposition kinetic of recycled polyethylene terephthalate/recycled polypropylene blend (2012) (16)
- Mechanical Behavior and Fracture Mechanism of Thermoplastic Composites with Commingled Yarn (1993) (16)
- Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading (1995) (16)
- Application of fibre-reinforced composites beam as energy absorption member in vehicle (2013) (16)
- Mechanical Properties of Jute Composite by Spray up Fabrication Method (2014) (16)
- The effect of injection speed on morphology and mechanical properties of Polyoxymethylene/Poly(lactic acid) blends (2014) (16)
- Deformation behavior and mechanical properties of braided rectangular pipes (2010) (15)
- Effect of molding condition and pellets material on the weld property of injection molded jute/polylactic acid (2013) (15)
- Weight changes of the fibre/matrix interface in GRP panels immersed in hot water (1994) (15)
- Bamboo-Based Ecocomposites and Their Potential Applications (2005) (15)
- Design methodology for a braided cylinder (1995) (15)
- Energy-absorption capability of multi-axial warp-knitted FRP tubes (2009) (15)
- Investigation of the Flexural Properties and Failure Behavior of Unidirectional CF/Nylon 6 and CF/Epoxy Composites (2017) (15)
- Mechanical Behavior and Fracture Mechanism in Flat Braided Composites. Part 3: Mechanically Fastened Joint in Flat Braided Bar (1994) (14)
- Development of Cockleshell-Derived CaCO 3 for Flame Retardancy of Recycled PET/Recycled PP Blend (2011) (14)
- Experimental investigation on the crushing properties of carbon fibre braided composite tubes (2003) (14)
- Thermal decomposition kinetic and flame retardancy of CaCO3 filled recycled polyethylene terephthalate/recycled polypropylene blend (2013) (14)
- Jute fabric reinforced engineering thermoplastic sandwich composites. I. The effect of molding time (2013) (14)
- Flexural behavior evaluation of needle-punched glass/jute hybrid mat reinforced polymer composites (2017) (14)
- Facile Preparation and Characterization of Short-Fiber and Talc Reinforced Poly(Lactic Acid) Hybrid Composite with In Situ Reactive Compatibilizers (2018) (13)
- Strength prediction of adhesively bonded carbon/epoxy joints (1996) (13)
- Energy Absorption Capability of 3D Braided-Textile Composite Tubes with Rectangular Cross Section (2007) (13)
- Studies of blends of poly(phenylene sulphide) and a liquid crystalline polymer—1. Compatibility and mechanical properties (1994) (13)
- Microstructure and fracture behavior of (co)injection‐molded polyamide 6 composites with short glass/carbon fiber hybrid reinforcement (2005) (12)
- Lamination Theory of Composite Material with Complex Fiber Orientation Distribution (1989) (12)
- Weld Line Strength in PC/ABS Injection Moldings (1999) (12)
- Crack propagation behavior and toughness of V-Notched polyethylene terephthalate injection moldings (2010) (12)
- A new numerical modeling for laminated composites (1995) (12)
- Fracture toughness evaluation of adjacent flow weld line in polystyrene by the SENB method (2005) (12)
- Mechanical Properties of Injection Molded Products Fabricated by Direct Fiber Feeding Injection Molding (2016) (12)
- Tensile properties of glass fiber reinforced polypropylene composite and its carbon fiber hybrid composite fabricated by direct fiber feeding injection molding process (2018) (12)
- Crushing properties of pultruded glass reinforced square tubes (2002) (12)
- Degradation of braided composites in hot water (2000) (12)
- Film insert molding as a novel weld‐line inhibition and strengthening technique (2008) (11)
- Relation between Weight Changes and Bending Properties of GFRP Panel Immersed in Hot Water (1993) (11)
- Design of Knitted Fabric Reinforced Composites (1995) (11)
- Comparison of Static and Impact Energy Absorption of Carbon Fiber/PEEK Composite Tubes (1996) (11)
- Mechanical and optical properties of silk fabric/glass fiber mat composites: an artistic application of composites (2018) (11)
- Effect of Carbon Powder Surface Treatment on Carbon Fiber Reinforced PA Composites (2016) (11)
- Polypropylene–glass fiber/basalt fiber hybrid composites fabricated by direct fiber feeding injection molding process (2017) (11)
- Mechanical Property of Glass Mat Composite With Open Hole (2012) (11)
- Effect of molecular weight and molding conditions on the replication of injection moldings with micro-scale v-groove features (2008) (11)
- Effect of polyurethane dispersion treatment on the performance improvement of carbon woven fabric-reinforced composites (2018) (10)
- Biomechanics Investigation of Skillful Technician in Hand Lay Up Fabrication Method (2012) (10)
- The Effect of Processing Parameter on Mechanical Properties of Short Glass Fiber Reinforced Polyoxymethylene Composite by Direct Fiber Feeding Injection Molding Process (2016) (10)
- Nondestructive evaluation of braided carbon fiber composites with artificial defect using HTS-SQUID gradiometer (2011) (10)
- New evaluation technique of interfacial properties in GFRP (1994) (10)
- Reactive Compatibilization of Short-Fiber Reinforced Poly(lactic acid) Biocomposites (2018) (10)
- Strength analysis for three-dimensional fiber reinforced composites (1995) (10)
- A study on the energy absorption capacity of braided rod composites (2018) (10)
- The effect of molecular weight on the interfacial properties of GF/PP injection molded composites (2006) (10)
- Evaluation of the interfacial properties in the embedded-single-fibre coupon test (1993) (10)
- Blister appearance in thermoplastic composites (2001) (10)
- Fabrication and Mechanical Properties of Unidirectional PE/PE Composites. (2002) (10)
- Through‐thickness distribution of LCP in PPS/LCP blends (1994) (9)
- Environmental effects on the progressive crushing behavior of glass cloth/epoxy composite tubes (1995) (9)
- Reliability evaluation of mechanical properties of AS4/PEEK composites (1994) (9)
- Z-pinning reinforcement and its bridging law (2003) (9)
- A simplified tensile damage analysis method for composite laminates using a quasi-three-dimensional model (1993) (9)
- Motion Analysis of Weaving “Kana-ami” Technique With Different Years of Experience (2012) (9)
- Finite element analysis of woven fabric composites considering interfacial properties (1994) (9)
- Investigation of Friction and Wear Behavior of Polyoxymethylene/Poly(Lactic Acid) Blends (2017) (9)
- In situ fiber-reinforced composites from blends containing polypropylene and polycaprolactone (2004) (8)
- Weight change mechanism of randomly oriented GFRP panel immersed in hot water (1993) (8)
- Tensile and Bending Properties of Jute Fiber Mat Reinforced Unsaturated Polyester Matrix Composites (2011) (8)
- Mechanical Properties of Flat Braided Composites With a Circular Hole (1999) (8)
- The effect of impregnation technique on bending properties of glass fiber reinforced polyethylene terephthalate composites (1994) (8)
- Study on Adhesive Property of Insert Injection Molded Glass Fiber Reinforced Polypropylene Composites (2016) (7)
- A preliminary investigation of flash formation during injection molding of polyphenylene sulfide and liquid crystalline polymer blends (1995) (7)
- Developing a System to Assess the Skills of Japanese Way of Tea by Analysing the Forming Sound (2013) (7)
- The effect of GF/PP matrix interfacial properties on the weldline strength in short glass fiber reinforced polypropylene (1996) (7)
- Effect of Silane Bonding State on Interfacial Strength in Glass Fiber-Epoxy Composites (1990) (7)
- Impact performance of glass cloth/epoxy composite tubes with different surface treatment (1996) (7)
- Study on morphology development for in situ fiber–reinforced composites by blending polyolefin and polycaprolactone (2005) (7)
- Effect of ammonium polyphosphate and fillers on flame retardant and mechanical properties of recycled PET injection molded (2017) (7)
- Damage Modes in Impact Loading of Glass Woven Fabric Composites (1996) (7)
- A flow simulation for the epoxy casting process using a 3D finite‐element method (2005) (7)
- Weight Change and Mechanical Properties of GRP Panel in Hot Water (1989) (7)
- Effect of Surface Oxidation and Sizing Treatment of Carbon Fiber on Interfacial Adhesion (1997) (7)
- Basic Study of Progressive Crushing Mechanism (2000) (7)
- Bending and Impact Properties of Biaxial Weft Knitted Composites (2011) (6)
- RELATIONSHIPS BETWEEN DEGREE OF SKILL , DIMENSION STABILITY AND MECHANICAL PROPERTIES OF COMPOSITE STRUCTURE IN HAND LAY-UP METHOD (2013) (6)
- Fabrication and mechanical properties of braided composite truss joint (1992) (6)
- Adaptive Process Control in Injection Molding (1991) (6)
- Fracture and acoustic emission characteristics of glass fiber reinforced plastics panels for hot water (1994) (6)
- Relationships between degree of skill, dimension stability and mechanical properties of composite structure in hand lay-up fabrication method (2014) (6)
- Influence of different glass fiber sizings on the mechanical properties of glass fabric composites: report of a round robin test (1995) (6)
- Crashworthiness of cardboard panels reinforced with braided glass fiber rods for vehicle side impact protection (2018) (6)
- Annealing effect in glass woven fabric composites, Part I. Mode I and mode II interlaminar fracture behavior (2000) (6)
- Role of surface treatment in textile composites (2001) (6)
- In situ fibrous structure oriented polymer blends composed of poly(lactic acid) and polycaprolactone containing peroxide (2008) (6)
- Study on the Weld Strength of Fiber Reinforced Polyamide Injection Moldings (1989) (5)
- Plasmon Enhanced Optical Responses of Diarylethene Molecules Adsorbed on Gold Nanorods (2019) (5)
- Mechanical and Damping Properties of Carbon-Fiber-Reinforced Composites with Various Thermoplastics. (1993) (5)
- Prediction of mechanical properties of SMC parts (2004) (5)
- Mechanical Property of CFRP by Carbon Spray Up Method (2013) (5)
- Open Hole Tensile Behaviors of Knitted Fabric Composites (1999) (5)
- Biomechanics Investigation of Skillful Technician in Spray-up Fabrication Method - Converting Tacit Knowledge to Explicit Knowledge in the Fiber Reinforced Plastics Molding (2014) (5)
- Tensile Properties of Glass Fiber/Carbon Fiber Reinforced Polypropylene Hybrid Composites Fabricated by Direct Fiber Feeding Injection Molding Process (2016) (5)
- Nondestructive evaluation of ±45 flat-braided carbon-fiber-reinforced polymers with carbon nanofibers using HTS-SQUID gradiometer (2013) (5)
- The effects of open holes on the fracture behaviors and mechanical properties of glass fiber mat composites (2015) (5)
- Comparison of painting technique of Urushi products between expert and non-expert (2012) (5)
- Crystallization, mechanical properties and thermal stability of cockleshell-derived CaCO3 filled polypropylene (2016) (5)
- RELIABILITY EVALUATION ON MECHANICAL CHARACTERISTICS OF CFRP (1992) (5)
- Influence of molding condition on tensile properties of flat braided fabric reinforced phenolic composite (2001) (5)
- Compression process effects on filling density and replication properties of micro‐surfaces during metal injection molding (2009) (5)
- Nondestructive Evaluation of Braided Carbon Fiber Composites Using High Tc SQUID (2010) (4)
- Mechanical properties of flat braided composite with flexible interphase (2000) (4)
- Annealing effect in glass woven fabric composites, Part II. Bending properties (2000) (4)
- Effect of Cross-Sectional Geometry on the Energy Absorption Capability of Unidirectional Carbon Fiber Reinforced Composite Tubes. (2008) (4)
- Effectiveness of high frequency heating on drying and intrinsic viscosity enhancement of recycled poly(ethylene terephthalate) (2012) (4)
- Effect of Initial Damage on the Deterioration of GFRP under Acidic Environment. (1994) (4)
- Material Design of High-Damping and High-Strength Composite. (1994) (4)
- Characterisation of heat-sealing part of laminated oriented nylon and polyethylene films (2005) (4)
- Human motion of weaving “Kana-ami” technique by biomechanical analysis (2012) (4)
- Determination of different morphological structures in PC/ABS open spiral injection moldings (2008) (4)
- The Flame Retardancy Study of the Furniture Made from Corrugated Cardboard (2016) (4)
- Effects of surface treatment and weave structure on interlaminar fracture behaviour of plain glass woven fabric composites: Part II. Report of the 2nd round robin test results (2002) (4)
- Development of energy absorption parts with FRP tubes (1999) (4)
- Effect of water environment on jute/polypropylene composites (2011) (4)
- Mechanical Performance of Glass Woven Fabric Laminates: Effect of Hybrid Layers with Different Silane Coupling Agents (1998) (4)
- Evaluation Approach for Measuring the Skill Transfer Level in the Forging Die Polishing (2015) (4)
- Effect of Moisture Content on the Mechanical Property of Natural Fiber Reinforced Composite from Recycled Jute Cloth (2011) (4)
- Impact of Operator Experience on Spray Gun Handling for Automobile Repair (2015) (4)
- Effect of de-sizing on the structural and mechanical properties of carbon fiber reinforced polypropylene composites molded by the novel direct fiber feeding injection molding technology (2022) (4)
- Evaluation of adhesion between glass/epoxy composite substrate and copper foil for printed circuit board applications (2002) (4)
- Effect of knitted and woven textile structures on the mechanical performance of poly(lactic acid) textile insert injection‐compression moldings (2012) (4)
- A quasi-three-dimensional elastic wave propagation analysis for laminated composites (1995) (4)
- Relationship between the Initial Fracture Stress and Fatigue Limit—Simple Prediction Method of Tensile Fatigue Limit of Composite (2019) (4)
- The influence of the silane coupling agent and delamination growth direction on mode I interlaminar fracture toughness of glass woven fabric composites (1998) (4)
- Reliability Engineering. Study on "Fibro-Composites". Morphology of PBT/PE Blend. (1998) (4)
- Fabrication and Mechanical Properties of Hybrid Composites with Braiding Construction (1987) (4)
- Bending properties of compression molded three‐layer long fiber polypropylene composites (1994) (4)
- Analysis of Crushing Mechanism on Composite Tube under Axial Load (1997) (4)
- Strength of mechanically fastened joint in flat braided composite. (1990) (4)
- C A Ε in Integrated Braided Composite (1995) (4)
- Degradation Behaviour of Glass Fibre Mat Reinforced Polypropylene Immersed in Hot Water (1993) (4)
- Interfacial Effect of Urethane Film Former for Glass Fiber in Polycarbonate and Polypropylene Composites (1997) (4)
- Analysis on the Three-Dimensional Wire Orientation of ‘Kana-Ami’ Metal Network Between Expert and Non-Expert (2014) (4)
- SQUID NDE on Braided Carbon Fiber Reinforced Polymers With Middle-End Fibers Under Step-by-Step Tensile Loading (2013) (4)
- Damage Mechanics on Hydrothermal-Aged Fiber-Reinforced Plastics (FRP) (1996) (4)
- Effect of Surface Treatment on Degradation Behavior Of GFRP in Hot Water (1991) (4)
- Durability of Adhesive Bonded FRP Joints Immersed in Hot Water (1991) (4)
- Mechanical Properties of Welt Knitted Fabric Reinforced Composites (1995) (3)
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends (2017) (3)
- Recycled poly(ethylene terephthalate)/recycled polypropylene blend: Effect of hygrothermal treatment (2012) (3)
- Effects of weld line on strength of fiber reinforced thermoplastics injection molding. (1987) (3)
- Effect of Processing Condition on Bending Properties of Thermoplastic Composites with Commingled Supn Yarn. Longitudinal Bending Strength and Impregnation Behavior. (1993) (3)
- Tensile Damage Analysis Method for Composite Laminates Using a Quasi-3-Dimensional Model. (1993) (3)
- Effect of Gate Shape on Fiber Orientation and Mechanical Properties of Injection Molded CF/LCP Thin Plates (2003) (3)
- Reliability Engineering. Structure and Mechanical Properties of Injection Molded Thin Strip of Carbon Fiber Reinforced Liquid Crystalline Polymer. (1998) (3)
- Durability of GFRP In Corrosive Environment (1993) (3)
- Bending Properties of Fiber-Hybrid I-shaped Braided Composite (2010) (3)
- Energy Absorption Properties of Braided Composite Tubes (2004) (3)
- Fabrication and Mechanical Properties of Multi-Reciprocal Braided Composite Tube (1996) (3)
- Kyokabe as a Composite Material (2009) (3)
- Fabrication and Mechanical Properties of PE/PE Knitted Fabric Composites (2001) (3)
- Effect Evaluation of Recreational Coloring Carried Out at Pay Nursing Home (2013) (3)
- Residual Strength Analysis Method for Composite Laminates with Internal Defects Using a Quasi-Three-Dimensional Model. (1993) (3)
- Influence of silane coupling agents on interlaminar fracture in glass cloth/unsaturated polyester and glass cloth/epoxy resin laminates (1993) (3)
- Fabrication and Mechanical Properties of Braided Composites (1996) (3)
- Evaluation of Flexural properties of the U-shape Composite Spring. (2018) (3)
- An Investigation on Skillful Gel-Coat Techniques and its Application to Beginner's Application (2015) (3)
- Mechanical Properties of Injection-Moulded Jute/Glass Fibre Hybrid Composites (2009) (3)
- Evaluation of Interfacial Strength for Glass Fibre Cloth Reinforced Plastics by First Fracture Detection (1993) (3)
- Resin/resin Bonding Strength and Control of Interface Geometry in Simultaneous Composite Injection Molding (1993) (3)
- Composite Materials. A Numerical Model for the Crush-Worthiness Analysis Designed for FRP Materials with Progressive Crushing Behavior. (2002) (3)
- Caregiver and Patient's Comfort Investigation Based on Head Motion Behavior Analysis During Transfer Care (2015) (3)
- Effect of Water Temperature on Hygrothermal Aging of GFRP Panel (1991) (3)
- Influence of Ultrasonic Vibration Frequency on Acceleration of Hydrothermal Aging of FRP (1999) (3)
- Visual Behavior in a Japanese Drum Performance of Gion Festival Music (2014) (3)
- The Transfer of Expertise in Conducting a Participatory Music Therapy During a Combined Rehabilitation-Recreational Program in an Elderly Care Facility (2016) (3)
- Influence of Fiber Surface Treatment on Hydrothermal Aging Behavior of a Woven Thermoplastic Laminate (2021) (3)
- Application of Paper Processing on Carbon, Jute and Paper Fiber Reinforced Plastic☆ (2016) (3)
- Evaluation of molecular orientation in injection molded parts with microscale features by Raman spectroscopy (2009) (3)
- Flow behavior of stampable sheet with a rib part (1994) (3)
- Effect of silane coupling treatment on microfracture in plastics reinforced with plain woven glass fabric (1993) (3)
- Mechanical Properties of Weft Knitted Fabric Reinforced Composites. (1993) (3)
- Internal Structure and Mechanical Properties of Glass Fibre Reinforced Pc/Abs Injection Mouldings with Different Fibre Surface Treatments (2008) (3)
- Effect of silane treated fiber on damage tolerance in glass fabric/vinylester laminates subjected to static and impact flexural loading (1995) (3)
- Initiation and growth of weld line during press moulding of composites. (1985) (3)
- Effects of Compatibilizers on Properties of Polypropylene/Bamboo Fiber Composites (2017) (3)
- Expert’s Common Factor of Painting Motion in Auto Repair Painting Process (2016) (3)
- Micro/Macro Damage Evaluation of Flat Braided Composites with a Circular Hole (2021) (3)
- Physical-mechanical and Morphological Properties of Cellulose Reinforced Composites from Recycled Jute Woven Cloth (2011) (3)
- Assessment of the influence of interfacial properties on stress transfer in composites by a numerical approach (1997) (3)
- Development of Cotton Candy Method for High Productivity Polypropylene Fibers Webs (2018) (3)
- Study on Energy Absorption Structures with Composite Tubes - Results of Study on Structural FRP Working Group (1997) (3)
- Effect of urethane binder on fiber reinforced polycarbonate injection moldings (2001) (2)
- Mechanical Property of Matrix Hybrid Laminates. (2001) (2)
- Study of Caregiver's Waist Movement Comparison Between Expert and Non-expert During Transfer Care (2015) (2)
- Minor Special Issue of Polymeric Materials. Fatigue Properties of Short Fiber Reinforced Polycarbonate Injection Moldings. (1994) (2)
- Design and Manufacturing of Composites (1997) (2)
- Process Analysis of Expert and Non-expert Engineers in Quartz Glass Joint Process (2015) (2)
- Effect of deformational behavior of cell structure on mechanical properties of polyurethane foam under compressive loading (2004) (2)
- Optimum Design Technique for Injection Molding Considering Productivity (2002) (2)
- Study on Method of Observing Maki-e Crafts Work in Urushi Craftspeople (2015) (2)
- Prediction of Initiation Site of Destruction of Flat Braided Carbon Fiber Composites Using HTS-SQUID Gradiometer (2012) (2)
- Notched strength prediction of glass fiber reinforced composite based on fracture toughness analysis (2014) (2)
- FABRICATION AND MECHANICAL PROPERTIES OF PE / PE COMPOSITE (1999) (2)
- Studies of blends of poly(phenylene sulfide) and a liquid crystalline polymer: Time-temperature superposition (1995) (2)
- Fabrication and mechanical properties of textile insert injection moldings (2004) (2)
- Influence of Glass-fiber Length and Interface Properties on Impact Strength of GFPP (2003) (2)
- Crashworthiness of recycled cardboard panels reinforced with hybrid columnar aluminum tube‐GFRP rods (2019) (2)
- Creation and Usability Evaluating of E-Learning Contents for Automobile Repair Block Painting (2017) (2)
- Crystallization kinetics and thermal resistance of bamboo fiber reinforced biodegradable polymer composites (2014) (2)
- A Quasi-3-Dimensional Vibration Analysis Method for Composite Laminates. (1992) (2)
- Jute Fiber Reinforced Polymeric Composites With Flexible Interphase (2012) (2)
- Comparison of Characteristics Recognition in the "Mitate" of Urushi Crafts (2014) (2)
- Analysis of Cutting Operation with Flower Scissors in Ikebana (2018) (2)
- Hydrothermal Ageing Mechanism of Natural Fiber Reinforced Composite in Hot Water (2012) (2)
- Motion Analysis of the Pounding Technique Used for the Second Lining in the Fabrication of Traditional Japanese Hanging Scrolls (2014) (2)
- Crashworthiness Characteristics of Carbon-Flax Composite Tubes for Aerospace Applications (2018) (2)
- Estimation of Mechanical Properties of Injection Molded CF/LCP Thin Plates Using Fiber Orientation Distributions (2001) (2)
- The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory (2017) (2)
- Evaluation of weldline strength of injection molded polystyrene by surface milling (2004) (2)
- Influence of Surface Treatment on Impregnating Property and Mechanical Properties of Structural Resin Transfer Molding Composites. (1994) (2)
- Brain Activity Analysis on "Kana-Ami" Making Process (2015) (2)
- Application of Multilayered Paper Processing to Hybrid Random Natural Fiber Mat (2014) (2)
- Mechanical properties of carbonized bamboo fiber reinforced biodegradable polymer composite. (2004) (2)
- Observation of Surface Structure of Kyo-Kawara (Ceramic Material for Roof Component) Fabricated by Traditional Skillful Technique (2011) (2)
- Process Analysis of Manufacturing of Sewing Scissors by All Forging Process and Understanding of Its Sharpness (2015) (2)
- Flow properties of long fiber reinforced PP sheets (1995) (2)
- Flow Characteristics of Compression Molded Stampable Sheet with Rib Part (1992) (2)
- Properties of laminate composites reinforced with glass fabrics treated with sol-gel transition silicate gel (1994) (2)
- Effects of silane treatment on mechanical properties of hydrothermal aged glass fabric/epoxy laminates (1995) (2)
- Mechanical Properties of Sandwich Injection Molded Jute/Glass Fiber Hybrid Composites (2011) (2)
- Mechanical Properties and Fracture Behavior of Hybrid Braided Composite Tube (2009) (2)
- Dependence of polyethylene terephthalate crack-tip temperature on stress intensity and notch sensitivity (2010) (2)
- Effect of moisture content of jute fabric and hybridization structure on the impact properties of jute and jute/glass hybrid composites (2016) (2)
- Structure and Mechanical Properties of Injection Moulded CF/LCP Thin Plates (2004) (2)
- Degradation behavior of mechanically fastened joints of glass‐reinforced crosslinked polyester immersed in hot water (1995) (2)
- Compression Properties of Square Braided Fabric-Recovery properties after flat compression- (2004) (2)
- Effect of Heat Sealing Temperature on Mechanical Properties and Molecular Structure of Heat-sealed Polylactic Acid Film (2006) (2)
- Effects of Injection Molding Conditions on Replication, Birefringence and Optical Property of Microscopic V-groove Structures for Polycarbonate (2008) (2)
- Simulation System for Mechanical Behaviors of Textile Composites (1995) (2)
- THERMOPLASTIC PREPREG INSERT INJECTION MOLDING COMPOSITES : MECHANICAL AND ADHESIVE PROPERTIES (2016) (2)
- Process Analysis of the Hand Lay-Up Method Using CFRP Prepreg Sheets (2015) (2)
- Mechanical Properties of FRP with Braided Structure:Part 2 : Tensile Behaviors of Tubes (1988) (2)
- Influence of Water Immersion on Mechanical Properties of Glass Fabric/Epoxy Laminates with Different Fiber Surface Treatment. (1997) (2)
- Experience Factors Influence on Motion Technique of "The Way of Tea" by Motion Analysis (2015) (2)
- Effects of Quantified Instructional Tool on Spray-up Fabrication Method (2015) (2)
- A Determination Method of Interfacial Material Constants in Plain Woven Glass Fabric. (1996) (2)
- Evaluation on Interfacial Structure of Composite Materials by Fractal Geometry (1992) (2)
- Thermal Decomposition Kinetic of CaCO3 Filled Recycled PET/PP Blend (2011) (2)
- Research on the Performance of Three Tea Whisks of "The Way of Tea" with Different Experience (2015) (2)
- Development of Learning Habit Scale and Situational Analysis of Japanese Junior High School Student Learning Habits (2017) (2)
- A Study of Applicability of Fiber Reinforced Plastic as Energy Absorption Member (2006) (2)
- The 8th International Conference on Composite Materials) (1991) (2)
- Influence of Proficiency on Eye Movement of the Surgeon for Laparoscopic Cholecystectomy (2015) (2)
- Determination of interfacial materials constants of glass/epoxy composite (1997) (2)
- Prediction of the failure strength of mechanically fastened FRP joints. (1990) (2)
- Fracture Behavior of Long Glass Fiber Reinforced PP Sheets With Hole (2011) (2)
- Micro Damage Initiation and Propagation Behavior of Plain Woven Composites after Fatigue Loading (2006) (2)
- Environmental Degradation Behavior of Kenaf Fiber Mat Composite (2014) (2)
- Assessment of interlaminar stress distribution in CFRP laminates containing transverse crack using finite element model (1993) (1)
- Effect of stacking sequences on the static strength of a mechanically fastened FRP joint. (1988) (1)
- Color Recognition of Students Observed During Braid Making (2017) (1)
- The Stacking Action in Autoclave Molding and a Process Judgment Analysis of the Worker (2015) (1)
- EFFECT OF SILANE TREATMENT ON FRACTURE PROCESS OF GLASS FIBER IN SINGLE FILAMENT COUPON TEST (1991) (1)
- A New Evaluation Method of Interface between Fiber Bundles in Woven Fabric Composites (1998) (1)
- Educational Effect Using Expert Model in Fire Process of Quartz Glass (2017) (1)
- Process Analysis of Expert and Non-expert Engineers in Quartz Glass Bending Process (2016) (1)
- Deformation Behavior of Knitted Fabric Made with Metal Fiber (2008) (1)
- Fracture toughness and notch sensitivity of jute fiber mats reinforced unsaturated polyester matrix composites based on the characteristic distance (2013) (1)
- Mode I and Mode II Interlaminar Fracture Behavior of Glass Woven Fabric Composites (2002) (1)
- Effects of Surface Treatment on Weld Strength of Fiber-Reinforced Polycarbonate Produced by Injection Molding (1993) (1)
- The Influence of Charge Pattern on Bending Properties of SMC Compression Molding Products. (1999) (1)
- Mechanical Properties of the Multilayer Laminated Intra-Hybrid Woven Fabric Composites (2014) (1)
- Tensile Behaviour of Pultruded FRP Sandwich Composite Bolted Joints (1994) (1)
- Influence at years of experience on operation concerning Kyoto style earthen wall (2012) (1)
- Recreation to nursing facilities tenant ~Coloring (2011) (1)
- Spinnability and characteristics of polyoxymethylene-based core–sheath bicomponent fibers (2019) (1)
- Mechanical Properties of PP/PP Composite (2002) (1)
- Evaluation of fiber/resin interphase phenomena with strand embedded tensile test (1996) (1)
- Bending Properties of Braided Composite Tubes (2004) (1)
- Mechanisms of Mode I Interlaminar Fracture of Glass Woven Fabric Composites (2000) (1)
- Analysis of eye movement for expert and non-expert concerning manufacturing process of "Kyo-Chochin" (2010) (1)
- Comparison of Worker’s Skill During Vacuum-Assisted Resin Transfer Molding Using Motion Analysis (2017) (1)
- Approach to Reducing Production Lead Time to 1/20 in Small-scale Corrugated Cardboard Factory (2016) (1)
- A Study of Wheelchair Transfer Assistance Technology By The Three-Dimensional Motion Analysis (2016) (1)
- Comparative Study of Design and Type of Work When Assembling Cardboard Beds for Shelters (2016) (1)
- Evaluation Method of Tensile Properties for Braids under Initial Loading (2004) (1)
- Damage Mechanics Modeling and Analysis for a Hydrothermally Aged Composite (1998) (1)
- Degradation Mechanism of Hot Water Immersed Glass SMC (2012) (1)
- Evaluation of Comfortable Using Jerk Method During Transfer Caring (2018) (1)
- Research of Work Climate at Nursing Home - From Job Separation and Management Capability Point (2015) (1)
- Study on Static and Long-Term Strength of Mechanically Fastened GFRP and CFRP (1987) (1)
- Compression Properties of Square Braided Fabric-Concave Compression Properties- (2004) (1)
- Effects of hairline cracks on the fracture behavior of polyethylene terephthalate injection moldings (2010) (1)
- Design of braided composite tubes by numerical analysis method (1995) (1)
- Skill Level Differences of Urushi Craftspeople in Urushi Products (2012) (1)
- Mechanical Properties of Square Braided Fabric (2002) (1)
- FTIR Analysis of Molecular Orientation at Weldline Region in Thermoplastics Injection Molding. (1992) (1)
- The difference of Fracture Behaviour between T300 and T800 Quasi-Isotropic Composites (1992) (1)
- 515 Effects of Adhesion on Property of Kyoto-bow (2010) (1)
- DESIGN OF HYBRID TUBULAR BRAIDED COMPOSITES WITH HIGH ENERGY ABSORPTION CAPABILITY (2009) (1)
- Effects of Molding Conditions on Interfacial Structure and Properties of Film Insert Molding (2004) (1)
- FLOW STATE OF COMPOSITE MATERIALS IN THE FORGING DIE DURING THE MOLDING PROCESS CONTINUED: EFFECTS OF MOLDING TEMPERATURE (1980) (1)
- Effects of processing condition on morphology and mechanical behaviour of PP/PP composites (2003) (1)
- Subjective evaluation of Kyo-Yuzen-dyed fabrics with different material in putting-past (Nori-oki) process (2012) (1)
- Molecular Weight Effect on Scratch Properties of Polypropylene (2012) (1)
- The Morphology of Injection Molded Polyacetal. The Effect of Molding Conditions on Morphology of Injection Molded Polyacetal. (1992) (1)
- Educational Guidance to Be an Expert in Trimming Processes for the Autoclaved CFRP Products (2017) (1)
- Mechanical Properties of Composite Compounded with ABS (GF) and CF by DFFIM (2017) (1)
- Eye Motion Analysis of Kyoto Japanese Lantern Craftsmen during the Kami-hari Process (2013) (1)
- Subjective evaluation for beauty of texture on metal surface with chasing operation (2012) (1)
- Expert Skill of Injection Molding - A New Composite Processing Based on DFFIM (2017) (1)
- 411 Relationship of the Time Distribution and the Punching Position of Sheet-metal Repair (2016) (1)
- Mechanical Behavior of CFRP Adhesive Joints with Thin Adherends. (1994) (1)
- A Pilot Study Investigating the Impact of Indoor Wall Construction on Performance during Long Monotonous Work (2013) (1)
- A Comparison of Processing Time and Strike Position Between Experts and Non-experts of Sheet-Metal Repair (2016) (1)
- Numerical Studies on Elastic Properties and Failure Mechanisms of Knit Fabric Composites (2000) (1)
- Interfacial effect of silane coupling agent in GFRP with a new evaluation technique. (1991) (1)
- Weldline Properties in Fiber Reinforced Polypropylene Injection Molded Plaques. (1992) (1)
- Improvement in damage tolerance of CFRP laminate using the hybridization method (2005) (1)
- Physiochemical and thermodynamic mechanical behavior of injection molded sized and de-sized CF/PP composites (2022) (1)
- Effect of Expert and Non-expert Workers’ Skill Level on the Quality of Glass Fiber Reinforced Composites by Hand Lay-Up Method (2016) (1)
- Continuative Fabrication and Mechanical Properties of Multi-axial Warp Knitted Thermoplastic Composites using Micro-braided Yarn (2004) (1)
- On crushing characteristics of hybrid sandwich aluminum-cardboard panels reinforced with glass fiber composite rods (2019) (1)
- The Difference in Micro-deburring Finish Produced by Groove Cutting Method (2016) (1)
- Effect of Surface Treatment and Testing Temperature on Mode I Interlaminar Fracture Behavior of Glass Woven Fabric Composites (2002) (1)
- A Quasi-three-dimensional Bending Analytical Method for Laminated Composites. (1995) (1)
- Study on the Effective of Utilization in Vent-Type Injection Molding (2017) (1)
- Influence of Interface Properties on Mechanical Strength of GFPP (2004) (1)
- Study on the Degradation Mechanism of the Urushi Products (2012) (1)
- Effect of Surface Treatment on Bending Properties of Long-Fiber-Reinforced Thermoplastics Composites Made of Commingled Yarn (1993) (1)
- Effects of Processing Time and Years of Experience on Pre-Bending Process for Bamboo Beam in Kyo-Chouchin (Japanese Lantern) Making Process (2011) (1)
- Visual Evaluation of "The Way of Tea" Based on Questionnaire Survey Between Chinese and Japanese (2015) (1)
- Learning technique to make the braiding (2017) (1)
- THREE DIMENSIONAL BRAIDED COMPOSITES - FABRICATION AND MECHANICAL PROPERTIES (1996) (1)
- Mechanical Properties of FRP with Braided Structure (1988) (1)
- Crashing Behavior of Braided Composites (2001) (1)
- Analytical Method for Three-Dimensional Composite Materials : Evaluation of Tensile Elastic Modulus (1994) (1)
- Highly cultured brush manufactured by traditional brush mixing technique “KEMOMI” (2012) (1)
- A Quasi-Three-Dimensional Analytical Method for Laminated Composites (1994) (1)
- Evaluation on Interfacial Microstructure of Composite Materials by Fractal Geometry (1993) (1)
- The Analysis of Repeatability of Polishing Work Motion for a Cold Forging Die with Simple Axial Symmetric Form (2017) (1)
- Hamada Laboratory, Applied Conventional Technology, Division of Advanced Fibro-Science, Kyoto Institute of Technology (2001) (1)
- Effect of Heat Sealing Temperature on Mechanical Properties and Molecular Structure at Heat-Sealed Parts of Polylactic Acid Film —Part II (2009) (1)
- Elevatation of Bearing Strength on Mechanically Fastened Carbon/Epoxy Joints by Thermoplastic Film Stacking. (1991) (1)
- Processing Method of Japanese Kyoto Bow by Oral DENTO MIRAI (2017) (1)
- Tensile and Shear Properties of Biaxial Flat Braided Carbon/Epoxy Composites With Dispersed Carbon Nanofibers in the Matrix (2008) (1)
- Introduction to Film Insert Injection Molding (2010) (1)
- Crushing properties of pultruded square glass tubular reinforced pipe (2000) (1)
- The Flameretardant Study of PVA Using for Corrugated Cardboard (2016) (1)
- Performance Analysis of Professional Sewing Scissors Using the "So-Hizukuri" Forging Process (2016) (1)
- Energy Absorption Capability of Hybrid Fibers Reinforced Composite Tubes (2017) (1)
- A Study on the Analysis and Prediction of the Anisotropy of Injection Molded GF/PA66 (2021) (1)
- Influence of Polycarbonate Oligomer (PC-O) Addition on Flowability and Appearance Property of Injection Molded Polycarbonate (PC) (2016) (1)
- Mechanical properties and fiber characteristics of glass fiber/carbon fiber reinforced polyethylene terephthalate hybrid composites fabricated by direct fiber feeding injection molding (2017) (1)
- Succession of Traditional Household-Based Handcraft Industry by Situated Learning Theory~the Case Study of the First and Only Japanese Maker Specialized in Soft Pastel (2014) (1)
- New durability evaluation method of fiber reinforced plastics (2009) (1)
- Designing of mechanically fastened joints in composite structures (1996) (1)
- Process Analysis of Expert and Non-Expert Engineer in Quartz Glass (2014) (1)
- Biomechanical analysis of “Kyo-Gashi” techniques and skills for Japanese sweets experts (2012) (1)
- RETRACTED: Fabrication of Poly(Lactic Acid) Nanofibers by Cotton Candy Method (2017) (1)
- Effects of Ultrasonic Waves during Resin Impregnation on the Mechanical Properties of Unidirectional Composite Materials (2018) (1)
- Internal Structure of Sandwich Injection Moldings (1998) (1)
- Effect of heat-sealing temperature on mechanical properties at heat-sealed parts in biodegradable plastic film (2004) (1)
- Interfacial Properties of Carbon Fiber Reinforced Thermoplastic and Thermosetting Composites (2014) (1)
- Jute Fiber Reinforced Thermoplastic Composites Fabricated by Direct Fiber Feeding Injection Molding (DFFIM) Process (2020) (1)
- Crushing Performance of Braided Composites (2019) (1)
- Process analysis of hammering in auto body repair (2018) (1)
- Mechanical Properties of Glass Fiber Reinforced Polyoxymethylene Composites by Direct Fiber Feeding Injection Molding (2014) (1)
- CRUSHING PERFORMANCE OF BRAIDED COMPOSITE RODS (1999) (1)
- Hydrothermal Aging and Mechanical Property of Injection Molded Jute/Glass/Polypropylene Hybrid Composites (2013) (1)
- Difference in Internal Structure of Products Obtained in Injection Molding and Injection Compression Molding (2009) (1)
- Effect on residual strength properties of needle punched chopped strand mat composites (2017) (1)
- Effect of Needle Punching Process on a Chopped Strand Mat Composite with an Open Hole (2018) (1)
- Effect of Interfacial Characteristics on Mode I Fracture Behaviour of Glass Woven Fabric Composites Under Static and Fatigue Loading (1997) (1)
- S0450105 Three Dimensional Motion Analysis of Mochi Pounding (2015) (1)
- Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (2017) (1)
- Investigation of Efficient Hammering Procedure on Sheet Metal Repair (2016) (1)
- Fatigue life and failure of FRP mechanically fastened joint. (1988) (1)
- Effect of Nesting of Fiber Bundles on Micro Fracture of Laminated Woven Fabric Composite (2002) (1)
- Damage behavior of low velocity impact test on glass fiber reinforced poly (ethylene terephthalate) composites (2018) (1)
- Investigation on Fracture Behavior of Glass Fiber Reinforced Thermoplstic and Thermosetting Composites (2017) (1)
- Fundamental Study of Two Layer Molding by Simultaneous Composite Injection Molding (2004) (1)
- Surface modifications on basalt fibers (2013) (1)
- Compression Properties for Square Braided Fabric without Constraint to the Side Face (2003) (1)
- Mechanical Properties of Jute/PLA Injection Molded Products-All Natural Composites (2011) (1)
- Pultrusion of Micro-Braided GF/PA6 Yarn: (1999) (1)
- Study on Flow Behavior during Metal Injection Molding (2005) (1)
- Estimation of Initial Debonding Stress in Adhesive Structure between Concrete and Composites (1996) (1)
- A Study on Design of Fiber-Reinforced Plastic (FRP) Tubes as Energy Absorption Element in Vehicles (2011) (1)
- Enhancement in Thermal Stability of Polyoxymethylene (POM)-Based Biopolymer Blend Materials (2019) (1)
- Interfacial adhesive strength of two layered polyoxymethylene/poly (lactic acid) molding by a simultaneous composite injection molding process (2011) (1)
- Measurement of permeability of woven jute fabrics and evaluation of mechanical properties of the jute fabric-reinforced composites (2008) (1)
- Effect of Pc-Oligomer on Structure and Properties of Pc/Abs Injection Mouldings (2008) (1)
- Comparison of Braiding Skills Between Expert and Non-experts by Eye's Movement Measurement (2015) (1)
- Prediction method for fiber orientation of rectangular braided composite pipe (2008) (1)
- Processing and Properties of Fiber Reinforced Article with Sandwich Structure in Simultaneous Composite Injection Molding (1993) (1)
- The Relationship Between Mechanical Properties and the Method Technique of GFRP Plate by Hand Lay-up Method: Effect of the Workers Experience (2015) (1)
- POLYURETHANE SURFACE TREATMENT ON TWO KINDS OF BASALT FIBER COMPOSITE AND MECHANICAL PROPERTIES COMPARISON (2014) (1)
- Effects of Fabrication and Processing Techniques of Aramid/Nylon Weft-Knitted Thermoplastic Composites on Tensile Behaviour (2004) (1)
- Motion Analysis of Manufacturing of Large "Echizen Washi" Japanese Traditional Paper (2019) (1)
- DIRECT FIBER FEEDING INJECTION MOLDING OF CARBON FIBER REINFORCED POLYCARBONATE COMPOSITES (2014) (1)
- Polishing Proficiency of Craftsperson in the Urushi Crafts (2016) (0)
- Energy absorption capabilities of braided composites (2000) (0)
- Effects of Natural Adhesive “Nibe” for Drawing Kyoto Bow (2009) (0)
- Mechanical Properties and Initial Fracture Behavior of Multilayer Laminated Intra-Hybrid Woven Fabric Composite (2015) (0)
- Features of hexagonal pattern on metal wire network structure made by experts and non-experts with different lengths of work experience (2013) (0)
- Mechanical Properties of Carbon Fiber Braided Composites with CNT (2009) (0)
- Analysis of technique of making bamboo hoop for "KIOKE" (2018) (0)
- The Influence of the Penetration of Resist Paste on Dyeing Effect in Kyo-Yuzen (2015) (0)
- Development of Injection Molded Plastic Products with Urushi-like Surface Appearance (2011) (0)
- Process Analysis During Edge Preparation for Steel Plate Between Expert and Non-expert (2017) (0)
- ガラス繊維マット複合材料の低サイクル引張疲労性能の研究を増強【JST・京大機械翻訳】 (2016) (0)
- 504 Study of the way of selecting materials for Kyoto bow (2011) (0)
- Process Analysis During Edge Preparation for Steel Plate (2016) (0)
- 507 Relationship between level of skill and state of production in polishing process of Maki-e craftswork (2015) (0)
- J231023 Visualization of skills of the Takumi using a usual lathe : Differences of consciousness for products (2011) (0)
- Expert vs. Elementary Skill Comparison and Process Analysis in VaRTM-Manufactured Carbon Fiber Reinforced Composites (2015) (0)
- Worker's Skill Comparison and Analysis of Mechanical Property (2017) (0)
- Synergistic Effect on the Characteristics of the Seductive Appearance (2019) (0)
- 512 Characteristics of Spray Gun Handling of Skilled Car Mechanic on Automobile Repair (2015) (0)
- EFFECT OF SURFACE TREATMENTS ON THE MECHANICAL PROPERTIES OF BIOCOMPOSITES (2009) (0)
- Quantitative Evaluation of Pulse Diagnosis Using Capillary Blood Flow of Images (2019) (0)
- The Analysis of Polishing Process of Cold Forging Die in Axial Symmetric Form and Axial Non-symmetric Form (2016) (0)
- 225 Mechanical Behavior of Braided Composite with a Hole (II) : Assessment of Micro Fracture by Acoustic Emission (2000) (0)
- In-situ Fiber Formation for Creating High Performance Plastic Composites (2004) (0)
- INTERFACIAL PROPERTY AND WELDING PROPERTY OF CONTINUOUS FIBER REINFORCEMENT THERMOPLASTIC COMPOSITE (2011) (0)
- An Investigation on the Relationship Between Operator’s Skill Level and Dimension Stability in Gel Coating (2014) (0)
- Mechanical Properties of Hybrid SMC Reinforced with Jute Cloth and Glass Cloth (2010) (0)
- Mechanical Properties of in-situ fiber reinforced Composites from Blends Containing Polyethylene with Poly-caprolactam (2021) (0)
- Prediction of modulus of injection Molded CF/LCP Thin Plate (2002) (0)
- Comparison of KEMOMI Technique Between Master Craftsman and Unskilled Worker (2015) (0)
- Influence of composite melt viscosity and melting screw design on fiber length and mechanical properties of injection molded long carbon fiber reinforced polypropylene (2015) (0)
- Evaluation of Japanese Metal Wire Network “Kana-ami” Based on Three-dimensional Analysis☆ (2015) (0)
- The effect of injection speed on the weld line properties of jute fiber/poly (butylene) succinate biodegradable composites. (2004) (0)
- Increasing Safety for Assisted Motion During Caregiving - Comparative Analysis of a Critical Care Nurse and a Care Worker Transferring a Simulated Care-Receiver (2018) (0)
- Prospektive Poster: Crashworthiness of hybrid carbon and flax tubes for aerospace applications (2017) (0)
- A New Evaluation Method of Adhesion Between Glass/Epoxy Composite Substrate and Copper Foil for Multilayer Circuit Board Applications (2021) (0)
- 221 Mechanical Behavior of Braided Composite with a Hole(I) : Micro Fracture Behavior (2000) (0)
- Evaluation of "Jiai" of Large "Echizen Washi" Japanese Traditional Paper (2019) (0)
- Development of ice hockey sticks using braided composites (2009) (0)
- Feature of cutting opearion of expert with flower scissors in ikebana (2019) (0)
- MECHANICAL PROPERTIE S OF NATURAL FIBERS REINFORCED POLY ( LACT IC ACID ) BASED BIOCO MPOSITES (0)
- Study on Braiding Skills by Comparing Between Expert and Non-experts with Eye's Movement Measurement (2016) (0)
- P096 Study of the improvement of braiding skills of non-experts (2015) (0)
- Study on the Development of Core Materials and the Break Through Phenomenon in Sandwich Injection Molding Part I (2001) (0)
- Bending Property of Thick Composite Materials (2003) (0)
- S0450104 Research on the Motion of Urushi Craftspeople in the Polishing Process (2015) (0)
- Processing and mechanical properties of continuous fiber reinforced thermoplastics (2004) (0)
- 315 The process analysis of hand work in autoclave action and evaluation of dynamic characteristics (2015) (0)
- Bending Properties and Finite Element Modeling of Biaxial Weft Knitted Composites (2012) (0)
- Effect of Flow Properties of Epoxy Resin on Semiconductor Molding Flow Simulation (2002) (0)
- Effect of Total Dose on Interfacial Properties of EB cured Composites (2002) (0)
- Effects of water absorption before molding on degradation behavior of hemp fiber reinforced composites under hot water (2011) (0)
- FLEXURAL BEHAVIOR OF NEEDLE PUNCH GLASS / JUTE HYBRID MAT COMPOSITES (2017) (0)
- Properties of Glass-Fiber Reinforced Thermoplastics with GF joined Structure (2006) (0)
- Study on Initial Failure in Tension of Glass Woven Fabric/Epoxy Composite with Functional Interphase (2004) (0)
- Comparison Knitting Skills Between Experts and Non-experts by Measurement of the Arm Movement (2015) (0)
- Fundamental Study on Blown Film Laminate and its Application to Impact Absorber (2013) (0)
- FABRICATION OF CF / AF FIBER HYBRID THERMOPLASTICS COMPOSITE (2008) (0)
- A Morphological Study of V-notch along Adjacent Flow Weldline (2002) (0)
- IMPACT PROPERTIES OF JUTE AND JUTE HYBRID REINFORCED COMPOSITES (2011) (0)
- On a Geometry Variation of So-hizukuri Forged Scissors associated with Technology Succession (2018) (0)
- SURFACE TREATMENT OF CONTINUOUS FIBER FOR IMPREGNATION AND MECHANICAL PROPERTIES OF THERMOPLASTIC COMPOSITES (2013) (0)
- Mechanical failure analysis of pultrusion glass fiber pipe based on acoustic emission technology (2023) (0)
- Designing Method for Beam Structures with Braided Composites (1999) (0)
- LOW-CYCLE FATIGUE BEHAVIORS OF MULTI AXIAL WARP KNITTED FABRIC COMPOSITE (2009) (0)
- The Study of Influence on Finish Deburring by Filing Process on The Exterior Shape (2018) (0)
- Comparison Knitting Skills Between Experts and Non-experts by Measurement of the Fabric Quality (2016) (0)
- Fabrication and mechanical properties of textile reinforced SMC (2020) (0)
- Quasi-Static Flexural Properties of a Pultruded Glass Fiber/Unsaturated Polyester Square Pipe (2019) (0)
- Mechanical and morphological properties of kevlar-fiber reinforced polyamide 6,6 (PA66) composites (2004) (0)
- Study on the Evaluation Methods of the Interfacial Properties of Glass Fiber Reinforced Polypropylene (2015) (0)
- Injection Molding of Thermoplastic Composites Using Mixing Nozzle (1998) (0)
- Mechanical Properties of Unidirectional Fiber Reinforced Composite with Flexible Interphase (2000) (0)
- Deference of technics between expert and non-expert on producing paper tubes (2016) (0)
- Analysis of movement in melt cutting (2019) (0)
- IMP-13: Energy Absorption Characteristics of Carbon Fiber Reinforced Textile Composite Tubes(IMP-II: IMPACT BEHAVIOR OF MATERIALS AND STRUCTURES) (2005) (0)
- Effect of silane coupling agent on impact performance of glass woven fabric laminates (1996) (0)
- Potentiality of Continuous Fiber Reinforced Thermoplastic Composites (2021) (0)
- 732 COMPRESSIVE STRENGTH AND FRACTURE PROPERTIES OF PAPER TUBES (2013) (0)
- Expanded horizon in advanced materials and processing : proceedings of the 8th Japan International SAMPE Symposium, Tokyo Big Sight, Tokyo, Japan, November 18-21, 2003 (2003) (0)
- A Comparison of Transition of Tool Gripping Force Between Expert and Non-expert During Deburring Processes (2017) (0)
- Effect of surface treatment condition on interfacial degradation behavior in GFRP under acidic conditions (2002) (0)
- Fabrication, processing and tensile properties of weft-knitted hybrid composites combining microbraiding and compression molding techniques (2004) (0)
- Notched Strength and Fractures Behavior of Chopped Glass Mat Reinforced Unsaturated Plastics (2011) (0)
- Effect of weave structure on mode I interlaminar fracture behaviour of plain glass woven fabric composites as a function of the interface: report of a round robin test II (1997) (0)
- Study on in-situ fiber reinforced composites: Polyolefin/Polycaprolactone blend (2020) (0)
- UTILIZING OF B CLASS CARBON FIBER IN COMPOSITE MATERIALS (2016) (0)
- Analysis of bending technology in Quartz glass Fire process (2016) (0)
- Fracture Behavior of Adjacent Flow Weldlines in Injection Molded Polystyrene Plates (2004) (0)
- Omotenashi in the Japanese Bridal Market (2015) (0)
- The effect of fiber length distribution of fiber-reinforced polypropylene composites injection-molded on the mechanical properties (2017) (0)
- A New Paper Tube Laminated by Plastics (2014) (0)
- Interphase degradation in GFRP under acidic condition (2004) (0)
- Development of high-quality design tile using silk-screen printmaking process (2016) (0)
- Evaluation of Adhesion between Glass/Epoxy Composite and Copper Foils of Printed Circuit Board using a Fracture-mechanics Approach (2021) (0)
- Influence of Up- and Down-Cutting Process on Interlaminar Shear Strength of CFRP Plates (abstract only) (2018) (0)
- Mechanical Properties of Flat Braided Composite with Flexible Resin (1999) (0)
- Mechanical Properties of Glass Fiber Reinforced Thermoplastic Composites (1993) (0)
- 320 Muscle Activity of Drawing the Bow with Kyoto Bow (2008) (0)
- Mechanical performance and fracture characteristics of injection molded r-pet/PE-E-GMA blends (2010) (0)
- Study on takumi's technique of baker (2017) (0)
- Mechanical Properties of Hybrid Textile Composites (2002) (0)
- Weld Lining Strength of Injection Molded Jute/PLA and Jute/PP (2012) (0)
- 503 Study of "Hone-tame" process in Kyo-chochin production process (2011) (0)
- Research on the Motion Technique of Japanese Tea Ceremony (2016) (0)
- Study on Shear-Out Failure Mechanism of Mechanically Fastened FRP Joint (2020) (0)
- Structure and Mechanical Properties of Injection Molding of Liquid Crystalline Polymer/Polyphenylene Sulfide Binary Blends. (1993) (0)
- Analysis of Initial Flow Behavior of SMC during Compression Molding (1999) (0)
- Mechanical properties of ultra high speed injection molded parts (2004) (0)
- Influence of notch effect on strength properties of fiber reinforced plastics. (1987) (0)
- Fabrication of Glass mat Thermoplastic composite by Needling Punching Process (2016) (0)
- Prediction of Elastic Modulus of Glass Short Fiber/Wood Powder/Polypropylene Hybrid Composites (2013) (0)
- Energy Absorption Properties of Various Square FRP Tubes (2003) (0)
- Static and dynamic properties of unidirectional CFRP laminates with flexible interphase (2002) (0)
- Fabrication of EB cured textile composites (I) - Effect of total dose on mechanical properties of plain woven fabric composites (2001) (0)
- Analysts of Process and Operation for Nagashisuki of Large Format Echizen Washi (2019) (0)
- Learning System on Surgical Technique of Laparoscopic Cholecystectomy (2016) (0)
- INFLUENCE OF SIZING OF GLASS FIBER ROVING ON MECHANICAL PROPERTIES IN GLASS FIBER BRAIDED FABRIC REINFORCED PHENOLIC COMPOSITE (2001) (0)
- 511 Motion analysis of the way of tea process by high-speed camera (2015) (0)
- The Eye Movement Analysis of a Referee in a Kendo Match (2018) (0)
- Elastic Wave Propagation Analysis for Laminated Composite Using a Quasi-three-dimensional Model (1995) (0)
- Experimental Studies on Brittle Fracture in Welded Butt Joints with Defects at Welding End (2003) (0)
- 134 Technique analysis of the expert concerning sheet processing by all hands for making automobile parts (2010) (0)
- Surface Smoothness of Glass Mat Reinforced Polypropylene Stampable Sheet (2004) (0)
- Study on strength and fracture-growth in FRP bolted joint. (1985) (0)
- The Difference Between Expert and Non-expert Skill in Beauty Services Based on Eye Tracking Technology (2019) (0)
- Acoustic Emission Characteristics and Fracture Properties of Epoxy Moulding Compound Filled with Spherical Silica Particles (1994) (0)
- Motion analysis of craftsmen in hand lay-up molding (2019) (0)
- S0450106 Features of the motion of experienced person and inexperienced person that appears in the Japanese bow (2015) (0)
- Prediction of Tensile Properties of Glass/Jute Hybrid Injection Moldings (2009) (0)
- Analysis of superiority by skill levels when deburring materials with different properties (2017) (0)
- Strain field and strength in mechanical fastened joint of woven fabric composites (2000) (0)
- Fiber Orientation and Mechanical Properties of Injection Molded CF/LCP Thin Plates (2020) (0)
- A study on the operation of scraping the sides of the side plate in making a large tub (2018) (0)
- 404 Analysis of eye movement and effect of proficiency in making the write net craft (2010) (0)
- Analysis of the Skills to Acupuncture (2015) (0)
- Interfacial characteristics in film insert molded PC/ABS and PC film (2006) (0)
- DEVELOPMENT OF THERMOPLASTIC RESIN IMPREGNATED YARN AND ITS COMPOSITE PROPERTIES (2014) (0)
- MECHANICAL AND ADHESIVE PROPERTIES OF ARAMID/NYLON INSERT INJECTION MOLDING COMPOSITES (2017) (0)
- Fabrication and Mechanical Properties of PE/PE Braided Fabric Composites (2003) (0)
- Hot Water Immersion , Durability , Initial Damage , Bending Test , Acoustic Emission (2013) (0)
- 403 Hybrid structure of a bamboo bow (2006) (0)
- Mechanical Properties and Fracture Mechanism of CF Flat Braided Composites With Dispersed Carbon Nanofibers in the Matrix (2008) (0)
- G040074 Effect of Trowel on Flow characteristics of Kyo-wall compound : Understanding of Secret of Kyo-wall Arsen (2011) (0)
- Fabrication of highly designed objects based on manufacturing of Kyo-gawara (2018) (0)
- Design of Vinyle-Ester Resin Composite with Affordable Interphase. (2002) (0)
- The Analysis of Removal Efficiency of Polishing Work Motion for a Cold Forging Die with Simple Axial Symmetric Form. (2017) (0)
- Work analysis of Expert and Non-Expert in the groove processing (2018) (0)
- 714 Optimization approach for operation process in the forging die polishing (2015) (0)
- S0450205 The investigation of Traditional Japanese Trowel (Part 2) : Surface Structure Comparison between and Expert and a Non-expert (2015) (0)
- A Study on the Mechanical Property of Injection Molded Cellulose/Glass Hybrid Composites (2010) (0)
- Effect of hairline crack on the toughness of polyethylene terephthalate (2009) (0)
- FLEXIBLE/CNTS INTERPHASE FOR CFRP COMPOSITES (2012) (0)
- EMG Activity of Arms Muscles and Body Movement During Chucking in Lathebetween Expert and Non-expert (2015) (0)
- Mechanically fastened joint behavior in sheet molding compound(SMC). (1988) (0)
- Effects of preference on crape structure of Saijo Japanese paper (2012) (0)
- Effects of Forming Conditions on Thickness Distribution of Vacuum Forming Products (1989) (0)
- An Investigation of Caregiver's Fatigue During Nursing Work in China (2015) (0)
- The Analysis of Removal Efficiency of Polishing Work Motion for Cold Forging Die with Simple Axial Symmetric Form (2017) (0)
- Reliability Engineering. Structure and Properties of Polyacetal Composite Moldings in Sandwich Moldings with Simultaneous Composite Injection Molding(SCI. Molding) Machine. (1998) (0)
- Recyclability and mechanical properties of painted bumpers (2019) (0)
- 712 The Difference in Micro-debarring Finish Produced by Groove Cutting Method according to the Proficiency of Expert and Non-expert : For Training of High Skilled Debarring Workers (2015) (0)
- NONDESTRUCTIVE EVALUATION USING SUPERCONDUCTING QUANTUM INTERFERENCE DEVICE FOR VARIOUS BRAIDED CARBON-FIBER-REINFORCED PLASTIC COMPOSITES UNDER TENSILE LOADING (0)
- EFFECT OF SURFACE TREATMENT ON THERMAL AND MECHANICAL PERFORMANCE OF JUTE FABRIC REINFORCED ENGINEERING THERMOPLASTIC COMPOSITES (2011) (0)
- Combustion Behavior of Carbon Fiber Reinforced Plastics (2017) (0)
- Mechanical Properties of Composites with Flexible Interphase (2019) (0)
- Energy Absorption Properties of Braided Glass Fiber Rod-Reinforced Carboard Panels (2018) (0)
- Analysis of the Process of Fabric Cutting Using the So-hizukuri Sewinf Scissors. (2016) (0)
- Development of One Unity Composites (2016) (0)
- EFFECT OF FIBER ORIENTATION ON THE MECHANICAL PROPERTY OF INJECTION MOLDED JUTE AND JUTE HYBRID REINFORCED COMPOSITES (2011) (0)
- 704 Process Analysis of Kioke Production and Difference of Proficiency in Rough Splitting Process (2015) (0)
- Evaluation of Mechanical Properties of Paper Tubes (2013) (0)
- MECHANICAL PROPERTIES OF GLASS SHORT FIBER / WOOD POWDER / POLYPROPYLENE HYBRID COMPOSITES (0)
- The Differences Between Bowing as Among Adult Members of Society in Japan and the Bowing of Japanese Students (2018) (0)
- 119 Influence of Residual Fiber Length on Puncture Impact Behavior of Injection Molded Glass Fiber Reinforced Polypropylene with and without Elastomers (2015) (0)
- 141 Research on "sabi" of Kyoto style earthen wall : Discoloration process of wall surface under different condition (2010) (0)
- Relationship between spray gun gripping force and working procedure during partial painting using metallic color in automobile repair painting (2018) (0)
- Evaluation Method for Mechanical Properties of Polymeric Brush as Cushioning Material on Conveying Equipment (2012) (0)
- Analysis of utterance contents in craftsmen for grinding operation of making knife (2019) (0)
- Examination of Void Formation Mechanism by Numerical Analysis (1997) (0)
- Eye Movement Analysis of Japanese Sewing Scissors Craftsman (2017) (0)
- CARDBOARD PANELS REINFORCED WITH BRAIDED UNIDIRECTIONAL GLASS RODS FOR VEHICLE CRASH IMPACT ATTENUATION (2017) (0)
- Analysis of motion on Japanese traditional mochi-pounding (2019) (0)
- Process analysis of decision for manufacturing of "Kyo-Makie", Dr. Yutaro SHIMODE by using Oral DENTO MIRAI Technique (2018) (0)
- Numerical Modeling Method of Unidirectional Fiber Reinforced Composite with Flexible Interphase. (2000) (0)
- Co-injection molding in metal injection molding (2004) (0)
- Estimation of durability of GFRP laminates under stress-corrosive environments using acoustic emission (1996) (0)
- Tensile Damage Analysis Method for Composite Laminates Using a Quasi-3-Dimensional Model (1995) (0)
- Mechanical properties of injection molded glass fiber reinforced PC/ABS with PC-oligomer (2004) (0)
- Effects of Molecular Weight of Polypropylene on the Correlation between Fracture Toughness and Mechanical/Impact Properties of Gfpp Composites (2009) (0)
- The effect of molding condition on interfacial mechanical and morphological properties of film insert injection molded PP-film/PP matrix (2004) (0)
- Effect of Skill Level Difference in the Polishing Process of the Maki-e Making Technique (2015) (0)
- Mechanical properties of weldline in injection molded PC/ABS (2004) (0)
- Void Flow Behavior in Structural Resin Transfer Molding (1993) (0)
- Effect of heat and moisture on mechanical performance of composite materials used in automotive structures (2021) (0)
- Particle Distribution and Mechanical Properties of Silica-Filled PMMA Micro-Injection Moldings (2008) (0)
- Effect of process condition in machining on mechanical properties of FRP (2016) (0)
- Bending Property of Braided Composite Pipe (2003) (0)
- 105 Analysis on the three-dimensional metal wire network STRUCTURE of "Kana-ami" (2015) (0)
- Influence of Needle Punch Density on Mechanical Properties of Jute/Glass Hybrid Composites (2018) (0)
- Study on weld line in sandwich injection moldings (2001) (0)
- Design of Fiber-Reinforced Composite Tubes as Energy Absorption Element (2009) (0)
- Effect of Scratch on the Mechanical Property of Injection Moldings (2014) (0)
- Relationship Between Technique for Curving or Shaping Stems in Ikebana and the Characteristics of Floral Materials (2018) (0)
- The Fracture behaviour of Vectran/Epoxy Quasi-Isotropic Laminates (1992) (0)
- Study on Physical Properties and Solubility of Film/Resin in Film Insert Injection Molding (2003) (0)
- 422 Relationship between Deformation Behavior and Load of Kyoto Bow in Difference of Adhesive (2009) (0)
- Fabrication and Mechanical Behavior of EB Cured Textile Composites (2020) (0)
- Application of Nanofiber Fabricated by Cotton Candy Method to Electric Double-Layer Capacitor (2018) (0)
- Evaluation of Properties of Heat Sealed Parts in Plastic Films (2003) (0)
- Influence of Fiber Type on Creep Properties of Plain Woven Glass Fabric/Vinylester Composites in Acid Environment (2000) (0)
- 406 Cross sectional structure and light reflexional property of Urushi products (2010) (0)
- Fabrication and mechanical property of long fiber reinforced thermoplastic composites using braiding technique (2020) (0)
- Effects of water immersion on mechanical properties of glass fabric/epoxy laminates with different silane treatment (1995) (0)
- Glass Fiber Orientation and Mechanical Properties of SMC Moldings (2004) (0)
- Effect of Processing Temperature on the Mechanical Properties of a Braided SiC/SiC Composite (2020) (0)
- Mechanical Properties of Injection Molded GF/CF Fiber Reinforced Plastics (2018) (0)
- Revision Technique of Curved Textile Machine Parts by Expert (2014) (0)
- An Investigation on Conversion from Tacit Knowledge to Explicit Knowledge in Hand Lay-Up Fabrication Method (2015) (0)
- 804 Influence of Whisking Movement on Bamboo Whisk in Thin Tea (2013) (0)
- of the same sheet-like SMC-structure and methods for preparing (2008) (0)
- 707 The Influence of the Permeation of Resistant Paste on Dyeing Effect of Kyo-Yuzen (2015) (0)
- 703 Development of high-quality design tile using silk-screen printmaking process (2015) (0)
- 135 Influence of Migaki process on surface structure and property (2010) (0)
- Energy Absorption Performances and Fracture Mechanisms of Braided Pultruded Composite Rods (2021) (0)
- Development of Awareness Notes for Education at a Manufacturing Site (2018) (0)
- A biomechanical analysis of winding by professional (2006) (0)
- A study of quality after deburring on precision cutting parts with different materials (2019) (0)
- Hot water degradation of mechanically fastened GFRP joints. (1991) (0)
- Mechanical Properties of Glass Fiber / Basalt Fiber Reinforced Polypropylene Hybrid Composites Fabricated by the DFFIM Process (2017) (0)
- 721 The analysis of eye movement in simulation of laparoscopic cholecystectomy (2013) (0)
- Mechanical Properties of Paper Thermosetting Resin Composites by Various Paper Materials (2014) (0)
- Effect of fiber surface treatment on thermal and mechanical properties of jute mat reinforced polycabornate composites (2012) (0)
- Flow Pattern Prediction in Polyurethane Foaming Process by Numerical Analysis (2002) (0)
- Simulation on the mechanical performance and fracture behavior of unidirectional carbon fiber-reinforced composites (2021) (0)
- The Effect of Thickness on Joint Property of Mechanical Joint with Washer and Torque (2004) (0)
- Design of SMC Products Using Initial Fracture Stress (2020) (0)
- Energy Absorption Behaviour of Textile Hybrid Composite (2004) (0)
- Morphology and Properties of Weld Line in Injection Molded Polyacetal (1998) (0)
- TENSILE MODULUS OF GLASS FIBER/CARBON FIBER REINFORCED POLYPROPYLENE HYBRID COMPOSITES FABRICATED BY VENTED INJECTION MOLDING (2017) (0)
- Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite (2002) (0)
- Initial Fracture of Carbon Fabric Reinforced Polyamide Composite (2018) (0)
- Erratum to “Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions” [Open Journal of Composite Materials (2017) 197-206] (2019) (0)
- Influence of Methacryl Silane Adsorption on Mechanical Properties of Glass Cloth Laminates (1993) (0)
- 705 A Translucency Evaluation of Black Rhus Lacquer (2012) (0)
- Mechanical and Optical Properties of Soft Pastel with Varying Body Pigment Ratio (2016) (0)
- Analysis of eye movement with training of surgical technique of laparoscopic operation (2016) (0)
- Prediction of Bending properties of Braided Composites with I-Beam Structure (1993) (0)
- Compounding order and mechanical properties in PP/PE/Talc compound (2004) (0)
- Evaluation on Weld-line in Articles Molded by injection compression molding (2011) (0)
- Effect of Pre-Molding Process and Additive of Injection Molded Wood/PP Composites (2014) (0)
- Energy Absorption Property of FRP Pipes with Bolted Joint (2003) (0)
- Structure and Mechanical Properties of Injection Molded LCP/PP Thin Plates Reinforced with Carbon Fiber (2003) (0)
- Effect of Thermal Treatment on Microstructure of Woolen Shear Prepared by Professional (2018) (0)
- Three-Dimensional Motion Analysis of Mochi Pounding (2019) (0)
- Future Applied Conventional Technology Engineering New Academic Fields from Manufacturing Country JAPAN (2014) (0)
- On the interfacial bonding characteristics between polyoxymethylene and poly(lactic acid) (2010) (0)
- G040073 Effects of Light Transmission Properties on Crape Structure of Saijyo Japanese Paper (2011) (0)
- Educational Tools to be an Expert in Hand Trimming Processes for Autoclaved CFRP Products (2017) (0)
- Chemical and physical degradation of glass fiber reinforced cross-linked polyester immersed in hot water (1994) (0)
- Interfacial Properties of Injection Molded Glass Fiber/Thermoplastics Composites (2016) (0)
- Long Term Behaviour of SMC from Recycled Jute Woven Cloth (2010) (0)
- The Approaches to Successor Training of the Traditional Industries in Sakai City (2018) (0)
- Impact Performances of PP Knit Inserted PP Injection Compression Molded Composites (2004) (0)
- Phantom Kyo-gawara - Molding and mechanical properties of Hon-usu (2018) (0)
- S0450204 Characteristics of Posture of Experts in Auto Repair Painting Process (2015) (0)
- G040072 Analysis of Gold Foil Cutting Motion in "Kirikane" Craftsman (2011) (0)
- Interval Timing Analysis of Behavior Patterns on “Kana-Ami” Making Process (2016) (0)
- MECHANICAL AND THERMAL PROPERTIES OF MICRO-AND NANO-SILICA-FILLED PMMA MICRO INJECTION MOLDINGS (2007) (0)
- 13th US-Japan Conference on Composite Materials (2011) (0)
- Analysis of Impression from Geometric Patterns in Textiles of Cultural Properties in Japan (2006) (0)
- Single-Fiber Test and Their Interpretation (1998) (0)
- EFFECT OF MOISTURE CONTENT ON NATURAL FIBER IMPREGNATION IN SMC (2008) (0)
- Eye Movement Differences Between Novices and Expert Surgeons in Laparoscopic Surgery Simulator (2017) (0)
- Mechanical Properties of Fiber Reinforced Polyamide Injection Moldings with Sandwich Structure (1998) (0)
- Numerical Simulations of Laminated Composite Using Quasi-three-dimensional Model (1995) (0)
- Prediction of elastic modulus of hybrid injection molded composite (2012) (0)
- Effect of Care Gesture on Transfer Care Behavior in Elderly Nursing Home in Japan (2015) (0)
- Effective Hybrid Lamination with Two Different Materials to Prevent Weld Line Formation during Molding Process (1984) (0)
- Elimination of Weldlines in Polystyrene Injection Moldings Using a Ceramic Heater (1992) (0)
- Fatigue Properties of Cellulosic-Fiber Mat Reinforced Thermosetting Plastic Composites (2014) (0)
- Movement Analysis of Transfer Assistance Using a Slide Board (2016) (0)
- DEVELOPMENT OF HOLLOW STRUCTURAL MEMBER USING NEW SMC MOLDING METHOD (2008) (0)
- Difference of Proficiency in Wooden Tub Manufacturing (2016) (0)
- A Study on Processing Conditions of Thermoplastic Composites with Commingled Yarn (1991) (0)
- The Essentials of the Training Kit to Improve Trimming Skills in the Autoclaved CFRP Products (abstract only) (2018) (0)
- Interfacial Characteristics of Insert-Injection Molding by Using Acoustic Emission (2017) (0)
- Void Flow Behavior in SRTM-Twin Injection Method (1995) (0)
- Burdened 3D analysis and Jerk of care receiver in transfer assistance movement (2017) (0)
- EXPERIMENTAL INVESTIGATION ON OFF-AXIS TENSILE INITIAL FRACTURE BEHAVIOUR OF GLASS PLAIN FABRIC/UNSATURATED POLYMER (UP) COMPOSITES (2017) (0)
- G040071 Influence of Career on Characteristics of Migaki Movement in Kyo-Gawara Processing (2011) (0)
- Development of bioplastics performing high optical characteristics of traditional Urushi craft products (2016) (0)
- A study of the skilled referee technology in judo based on eye tracking (2018) (0)
- A Study on Failure Behavior of Unidirectional Carbon Fiber Reinforced Thermosetting and Thermoplastic Composite (2015) (0)
- The Influence of Initial Fracture Behavior by Knitting Structure with Knitted Composites (2002) (0)
- 506 Relationship between Selection of "Kimono" and Price Decision (2015) (0)
- Mechanical Properties of Matrix Hybrid Thick-Composites (2004) (0)
- Effect of Weave Parameters on Preform Architecture and Composite Performance of 3-D Interlinked Woven Structures (1999) (0)
- A COMPARATIVE STUDY OF THE TENSILE PROPERTIES AND FAILURE BEHAVIOR OF GLASS / POLYETHYLENE TEREPHTHALATE ( PET ) MAT COMPOSITES (2017) (0)
- Investigation on Mechanical Properties of Dicyclopentadiene Based Textile Composite (2020) (0)
- 709 THE STUDY ON IMPROVEMENT OF COMB PIN PART IN LINKING MACHINE OF TEXTILE PROCESS BY EXPERT HITTING TECHNIQUE (2015) (0)
- 217 Energy Absorption Properties of Multiplex Tubular Composite Pipes (2000) (0)
- Technical skill of cutting operation in large wooden tub (2019) (0)
- Composite Materials. Preparation of Flexible Interphase in FRP and Determination of the Finite Thickness. (2002) (0)
- Initial Fracture Behaviour of the Weft-Knitted Textile Composites Having Welt-Knit Architectures (2004) (0)
- Mechanical property of polyethylene fiber reinforced thermoset plastics (2001) (0)
- Analysis of Blowing in Quartz Glass Fire Process (2016) (0)
- Mechanical Properties of Textile Hybrid Composite (2004) (0)
- Effect of Fiber Surface Treatment on Mechanical Properties of Polyethylene / Epoxy Composites (2002) (0)
- S0450101 Mechanical and Optical Properties of Soft Pastel with Varying Body Pigment Ratio (2015) (0)
- Optimization of Runner Design Using Injection-Molding Flow Simulator (1998) (0)
- Mechanical Properties of Matrix Hybrid Composites with Mechanical Joint (2004) (0)
- Study of the change of the heart rate of guests by Japanese tea ceremony (2018) (0)
- Mechanical and Vibration Damping Properties of Adhesive Bonded FRP Joints with High Toughness Adhesion (1994) (0)
- Impression Evaluation and Movement Evaluation in Gait Observation of Rehabilitation Patient (2017) (0)
- 521 Effect of Trowel on Flow characteristics of Kyo-wall compound II : Understanding of Secret of Kyo-wall Arsen (2012) (0)
- A Study of the Tacit Knowledge on the Design of Kimono Patterns from Japanese Painting (2015) (0)
- The Effect of Buckling Fracture at Bolt Jointing Region of FRP Pipe on Energy Absorption Property (2002) (0)
- Effect of Stitching on Energy Absorption Property of Carbon Fiber Braiding Composite Tubes 缝纫增强对碳纤维编织复合材料管件能量吸收性能的影响 (2015) (0)
- Structural Designing for Sheet Molding Compound (2009) (0)
- Bending Properties of 3D Glass Woven Fabric Reinforced Composites (1993) (0)
- Effect of surface treatment on mode II interlaminar fracture behaviour of plain glass woven fabric composites: report of the third SIMS round robin text (2001) (0)
- Proposal of Future-Applied Conventional Technology (2014) (0)
- Comfort of transfering care focusing on the patient's head (2018) (0)
- 710 THE STUDY ON EFFECT OF ARM MOVEMENT DURING KNITTING PROCESS ON KNITTING QUALITY (2015) (0)
- Degradation behavior of bulk molding compound in acid environments. (1988) (0)
- Analysis of Eye Movement of Caregiver Concerning on Transfer Operation (2015) (0)
- Modified Quasi-three-dimensional 4-pointBending Simulation Method For CFRPCylindrical Tube (1998) (0)
- Traditional Mirai Studies for Regional Creation (2017) (0)
- Evaluation Method and Characterization for Jiai of Large Format Echizen Washi (2019) (0)
- Mechanical properties of PC/ABS ultra high-speed injection moldings (2004) (0)
- 140 Hone-tame process in Kyo-Chochin fabrication (2010) (0)
- HYGROTHERMAL AGEING AND CREEP BEHAVIOR OF GLASS FIBER REINFORCED POLYMER COMPOSITES (0)
- The Secrets of Craftspeople in the Japanese Traditional Hand Towel Industry (2018) (0)
- Evaluation of interfacial properties by embedded single fibre test in aramid/epoxy composites (1998) (0)
- 405 Comparison of motion concerning making "Kyo-Chochin" in expert and non-expert (2010) (0)
- Comparison of Different Tea Whisk Influence on Bubble Form in Processes of "The Way of Tea" (2014) (0)
- 722 Judge of beauty about Future Applied Conventional Technology Engineering : In case of Ikebana (2013) (0)
- THE INFLUENCE OF THERMAL AGEING ON MECHANICAL PROPERTIES OF GREEN RUBBER COMPOSITE (0)
- Flame Retardancy of Bio-base Plastics (2016) (0)
- Tensile and bending Properties of hybrid Jute Fabric/Glass Fabric/Jute Mat Reinforced Unsaturated Polyester Matrix Composites (2012) (0)
- 2D6-4 Behavioral Analysis on Making Process of The Way of Tea Between Expert and Non-Expert (2014) (0)
- CHARACTERIZATION OF FIBER HYBRID INJECTION MOLDINGS FOR NATURAL FIBER COMPOSITES (2008) (0)
- Thermomechanical Analysis of Heat Sealing Parts on Plastic Films (2003) (0)
- Motion Analysis of Interval Time During "Kana-ami" Making Process (2015) (0)
- The Analysis of Process and Motion in Removing burr with Defferent Properties (2018) (0)
- Interfacial properties of film-insert injection molded polyethylene-film/polyethylene matrix (2004) (0)
- 706 Characteristics of Expert Craftsperson in Mitate of Urushi Crafts (2015) (0)
- Effects of Spray Gun Handling of Automobile Repair on Carrier of Car Mechanic (2015) (0)
- Environmental Durability of Natural Fiber Reinforced Unsaturated Polyester Composite (2013) (0)
- Lateral Compressive Properties of Paper Tube (2014) (0)
- Clarification of Void Flow Behavior in Structural Resin Transfer Molding by Coupled Macro-Micro Flow Analysis (1996) (0)
- Relationship between Bending Technique for Floral Materials in Ikebana and Bending strength (2017) (0)
- Fracture and strength of mechanically fastened joint in multi-axial flat braided composite (1992) (0)
- Fracturre toughness evaluation of adjacent flow weld line by SENB method (2016) (0)
- Study on the Effect of Arm Movement in Knitting Process on Knitting Quality (2016) (0)
- 508 Observation of Surface Structure in Kyo-Gawara Migaki Process (2011) (0)
- A Comparison of Deburring Processes and Methods of a Different Nature Between Expert and Non-expert (2016) (0)
- S0450203 Effect of Career of Sheet-metal Repair for Car on Tools Usage (2015) (0)
- ACID STRESS CORROSION OF E AND C GLASS HYBRID COMPOSITES (0)
- Design and manufacturing of composites : proceedings of the Joint Canada-Japan Workshop on Composites, Kyoto, Japan, August 1996 (1997) (0)
- GS0202 Development of Pultruded Composites with Braiding Technique (2008) (0)
- Characteristics of Cutting Performance for Japanese Sewing Scissors Made by the "So-hizukuri" Forging Process (2017) (0)
- 2564 Interrelations of cell structure and mechanical properties of porous materials molded under several conditions (2007) (0)
- A Quasi-three-dimensional Lateral Compressive Analytical Method for Composite Cylinders. (1995) (0)
- Development of Self-Learning Program for the Bending Process of Quartz Glass (2017) (0)
- Comparison of Gait Analysis by the Way of Semi-structured Interviews (2014) (0)
- Improvement of Needle Bar in Textile Machine by Hitting Process (2014) (0)
- Design of Knitted Fabric Reinforced Composites (1995) (0)
- Characteristic of Motion by Experienced Engineer in Sheet Metal Repair (2016) (0)
- Effect of silane treated fiber on impact properties of hydrothermal aged glass fabric/epoxy laminates (1995) (0)
- CARBON NANOFIBERS PREPARATION FROM PAN NANOFIBERS BY COTTON CANDY METHOD (2017) (0)
- Return of technology from the temperature history of the kiln in the making of KYOGAWARA (2018) (0)
- EVALUATION OF DAMAGE MECHANISM OF ± 45 O FLAT BRAIDED CFRP COMPOSITES CONTAINING CARBON NANOFIBERS UNDER TENSILE LOADING WITH ASSISTANCE OF SQUID TECHNIQUE (2011) (0)
- Energy Absorption Properties of Composite (2021) (0)
- Educational effect using a new educational program in fire processing of quartz glass (2018) (0)
- Energy Absorption Capabilities of Composite Tubes under Off-axial Compressive Loads. (1998) (0)
- Internal structure of PC/ABS injection-compression moldings (2004) (0)
- Analysis of Fracture Mechanism on Paper Tubes and Relationship Between Paperboard Property and Property of Paper Tubes (2016) (0)
- Fabrication of Glass Fiber Reinforced Plastics with Black Silk Fabric Simulated to Urushi Products (2016) (0)
- Analysis of eye movement concerning evaluation of hexagonal patterns in the wire net craft (2010) (0)
- The Research about The Welding Defects and Repairs of Welded-joints in Steel Structure Buildings (2003) (0)
- Movement Analysis about “Adjusting Care-receiver’s Position” of Transfer Assistance Using a Slide Board (2016) (0)
- DEVELOPMENT OF CONTINUOUS BRAIDED PULTRUSION PROCESS (2008) (0)
- STUDY OF POSSIBILITY TO PREDECT INITIATION SITE OF DESTRUCTION OF FLAT BRAIDED CFRP BY SQUID-NDE (2011) (0)
- Influence of Migaki Process on Surface Structure and Property of Kyo-Gawara (2012) (0)
- 711 EYE MOVEMENT ANALYSIS FOR BRAIDING SKILL OF THE EXPERT AND NON-EXPERTS (2015) (0)
- Comparison of Description Skill on Characteristics of the Urushi Crafts Work Between Expert Craftspeople and Non-expert Craftspeople (2015) (0)
- Tensile Behaviour of Film-Stacked PP/PP Knitted Textile Composite Using 1×1 Rib Knitted Fabrics (2004) (0)
- Injection Molding of Poly(lactic acid) Using Supercritical Fluids and Some Properties of the Foamed Specimens (2012) (0)
- Motion analysis of the way of tea (2016) (0)
- Analysis of making side in a large wooden tub (2019) (0)
- Mechanical Property and Structure of Injection Expanded Molding of GF Reinforced PP (2005) (0)
- Mechanical Properties of Matrix Blended Composites (2004) (0)
- Delamination Behavior of Laminated Paper (2014) (0)
- Numerical Analysis on "Kana-Ami" Structure Between Expert and Non-expert (2015) (0)
- Evaluation of the mass transfer rate using computer simulation in a three-dimensional interwoven hollow fiber-type bioartificial liver (2018) (0)
- Microscopic observation of initial fracture in textile composites (2020) (0)
- Hybrid interface composites: mechanical properties and fracture resistance of composites containing fibres with different silane coupling agents (2002) (0)
- FABRICATION , PROCESSING AND MECHANICAL PROPERTIES OF FLAT BRAIDED THERMOSETTING COMPOSITES USING NATURAL AND COATED JUTE YARN (2003) (0)
- Motion Analysis of the Tea Whisk Concerning the Way of Tea (2017) (0)
- 1B1-5 Effect of Hand and Standing Posture with the Body Movement and the Center of Gravity Movement on Differential Chucking experience (2014) (0)
- Analysis of Cure Behavior of SMC during Compression Molding (1998) (0)
- DEVELOPMENT ON FABRICATION AND THE MECHANICAL PROPERTY OF HYBRID-SMC (2016) (0)
- 420 Elucidation of the transformation mechanism of the metal wire in Knitting "KANAAMI" (2010) (0)
- 226 Mechanical Properties of Glass Woven Fabric Composite with Affordable Interphase (2000) (0)
- 717 Manufacturing Process of Kyoto Soft-pastels and Color Characteristics (2013) (0)
- An Investigation on the Mechanical Property of Unidirectional Basalt Fiber Composites (2011) (0)
- The property of polishing tools for polishing work of a cold forging die with simple axial symmetric form (2018) (0)
- S0450201 Three-dimensional structure analysis of "Kana-ami" between expert and non-expert (2015) (0)
- Study on In-mold Punching during PPS/GF Injection Molding (2007) (0)
- TENSILE PROPERTIES OF BRAIDED COMPOSITE RODS (1996) (0)
- Effect of fiber surface treatment on damage tolerance in glass fabric/vinylester laminates subjected to impact flexural loading (1995) (0)
- Assessment of Fracture Behavior of Flat Braided CFRP Composites Under Tensile Loading With Assistance of SQUID Technique (2011) (0)
- OBSERVATION OF INTERFACIAL FRACTURE IN CF/GF MULTI-AXIAL WARP KNITTED FABRIC COMPOSITE MATERIALS SBJECTED IMPACT LOAD (2007) (0)
- Void evaluation of polyurethane foam materials by image processing technology (2020) (0)
- IMPACT PROPERTIES OF JUTE FIBER MATS REINFORCED UNSATURATED POLYESTER MARTIX COMPOSITES (2011) (0)
- The Analysis of Repeatability of Polishing Work Motion for a Cold Forging Die with Simple Axial Symmetric Form. (2016) (0)
- OS12-6-3 Fracture Characteristics of Random Oriented Glass Fiber Mats Composites (2011) (0)
- Natural Fiber Filled Composite Material (2008) (0)
- Retraction:Characteristics of Expert's Painting Motion in Auto Repair Painting Process using Solid Color Paint (2016) (0)
- Characterization of the Impact Properties of Jute Fiber Mats Reinforced Unsaturated Polyester Matrix Composites (2011) (0)
- Effects of Polycarbonate Oligomer on Morphological and Mechanical Properties of the Weldline in Injection Molded Polycarbonate/ABS Blend (2009) (0)
- Crack initiation in filament composite tubes under lateral compression. (1985) (0)
- Interfacial properties of EB cured textile composite (2002) (0)
- S0450103 Linkage of a waist and the neck in handmade Japanese paper manufacturing (2015) (0)
- STUDY OF PRODUCTION STABILITY IN DFFIM (2016) (0)
- Impact Properties of Jute Cloth/Mat Reinforced Unsaturated Polyester Matrix Composites (2011) (0)
- Mechanical Properties of Glass Woven Fabric Reinforced Vinyl-Ester Composite with Affordable Interphase (2020) (0)
- Fabrication and Impact Performance of Jute/Vinylester Composites Using Natural and Bleached Woven Jute Fabrics (2004) (0)
- Hydrothermal effects on mechanically fastened glass/polypropylene composite joints (1994) (0)
- Effect of talc filler on recycled pet blends injection moldings (2013) (0)
- Effect of Hot Water Immersion on the Mechanical Properties of Jute and Jute Hybrid Reinforced Composites (2011) (0)
- The Secret of Tears of Wine (2017) (0)
- Effect of temperature on impact damages of glass woven fabric composites (1996) (0)
- 726 The study of Fun Maki motion with electromyography (2013) (0)
- Fracture Morphology Characterization of Unidirectional CFRP and CFRTP Composites (2017) (0)
- Influence of Engineer Movement for Auto Repair Painting on Finished Surfaces (2016) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Hiroyuki Hamada,?
Hiroyuki Hamada, is affiliated with the following schools: