Jian‐zhang Li
#131,354
Most Influential Person Now
Jian‐zhang Li's AcademicInfluence.com Rankings
Jian‐zhang Liengineering Degrees
Engineering
#4541
World Rank
#5739
Historical Rank
Materials Science
#216
World Rank
#219
Historical Rank
Download Badge
Engineering
Jian‐zhang Li's Degrees
- PhD Materials Science and Engineering University of Science and Technology of China
- Masters Materials Science and Engineering University of Science and Technology of China
- Bachelors Materials Science and Engineering University of Science and Technology of China
Why Is Jian‐zhang Li Influential?
(Suggest an Edit or Addition)Jian‐zhang Li's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Soy protein isolate-based films reinforced by surface modified cellulose nanocrystal (2016) (138)
- Preparation and characterization of a soy protein-based high-performance adhesive with a hyperbranched cross-linked structure (2018) (122)
- High-Performance and Fully Renewable Soy Protein Isolate-Based Film from Microcrystalline Cellulose via Bio-Inspired Poly(dopamine) Surface Modification (2016) (117)
- Two-dimensional membrane and three-dimensional bulk aerogel materials via top-down wood nanotechnology for multibehavioral and reusable oil/water separation (2019) (100)
- 3D multi-wall perforated nanocellulose-based polyethylenimine aerogels for ultrahigh efficient and reversible removal of Cu(II) ions from water (2019) (99)
- Effect of nitrogen phosphorus flame retardants on thermal degradation of wood (2010) (89)
- Preparation of cross-linked soy protein isolate-based environmentally-friendly films enhanced by PTGE and PAM (2015) (89)
- Aggregation-induced structure transition of protein-stabilized zinc/copper nanoclusters for amplified chemiluminescence. (2015) (84)
- Soybean meal-based wood adhesive enhanced by ethylene glycol diglycidyl ether and diethylenetriamine (2015) (83)
- Improvement of interfacial interactions using natural polyphenol-inspired tannic acid-coated nanoclay enhancement of soy protein isolate biofilms (2017) (82)
- A novel water-based process produces eco-friendly bio-adhesive made from green cross-linked soybean soluble polysaccharide and soy protein. (2017) (80)
- Carbon nanoparticles/soy protein isolate bio-films with excellent mechanical and water barrier properties (2016) (80)
- Properties of soybean-flour-based adhesives enhanced by attapulgite and glycerol polyglycidyl ether (2014) (77)
- An eco-friendly wood adhesive from soy protein and lignin: performance properties (2015) (77)
- Soy protein adhesive with bio-based epoxidized daidzein for high strength and mildew resistance (2020) (73)
- Borate chemistry inspired by cell walls converts soy protein into high-strength, antibacterial, flame-retardant adhesive (2020) (72)
- Facile biomimetic self-coacervation of tannic acid and polycation: Tough and wide pH range of underwater adhesives (2021) (71)
- The synergy between natural polyphenol-inspired catechol moieties and plant protein-derived bio-adhesive enhances the wet bonding strength (2017) (69)
- Physico-chemical properties improvement of soy protein isolate films through caffeic acid incorporation and tri-functional aziridine hybridization (2016) (68)
- Preparation and characterization of a novel environmentally friendly phenol–formaldehyde adhesive modified with tannin and urea (2016) (67)
- Fully bio-based soybean adhesive in situ cross-linked by interactive network skeleton from plant oil-anchored fiber (2018) (66)
- Core-shell nanohybrid elastomer based on co-deposition strategy to improve performance of soy protein adhesive. (2019) (66)
- “Green” bio-thermoset resins derived from soy protein isolate and condensed tannins (2017) (66)
- Wood/Polymer Nanocomposites Prepared by Impregnation with Furfuryl Alcohol and Nano-SiO2 (2014) (65)
- Flammability and physical–mechanical properties assessment of wood treated with furfuryl alcohol and nano-SiO2 (2015) (65)
- Soybean meal-based adhesive enhanced by MUF resin (2012) (64)
- Larch tannin-based rigid phenolic foam with high compressive strength, low friability, and low thermal conductivity reinforced by cork powder (2019) (64)
- Chemical modification of wood by anhydrides without solvents or catalysts (2000) (64)
- Bioinspired interface engineering of gelatin/cellulose nanofibrils nanocomposites with high mechanical performance and antibacterial properties for active packaging (2019) (64)
- Preparation and characterization of lignin demethylated at atmospheric pressure and its application in fast curing biobased phenolic resins (2016) (59)
- Effect of flame retardant treatment on dimensional stability and thermal degradation of wood (2015) (59)
- High capacity oil absorbent wood prepared through eco-friendly deep eutectic solvent delignification (2020) (58)
- Improvement of water resistance, dimensional stability, and mechanical properties of poplar wood by rosin impregnation (2016) (58)
- Fast Curing Bio-Based Phenolic Resins via Lignin Demethylated under Mild Reaction Condition (2017) (57)
- Developing Eco-friendly High-Strength Soy Adhesives with Improved Ductility through Multiphase Core–Shell Hyperbranched Polysiloxane (2019) (56)
- Construction of bioinspired organic-inorganic hybrid composite by cellulose-induced interfacial gelation assisted with Pickering emulsion template (2019) (55)
- Effects of Melamine Addition Stage on the Performance and Curing Behavior of Melamine-Urea-Formaldehyde (MUF) Resin (2013) (55)
- Functionalization of halloysite nanotubes (HNTs) via mussel-inspired surface modification and silane grafting for HNTs/soy protein isolate nanocomposite film preparation (2017) (54)
- Development of mainly plant protein-derived plywood bioadhesives via soy protein isolate fiber self-reinforced soybean meal composites (2019) (54)
- Toughening improvement to a soybean meal-based bioadhesive using an interpenetrating acrylic emulsion network (2016) (53)
- Improvement in antibacterial and functional properties of mussel-inspired cellulose nanofibrils/gelatin nanocomposites incorporated with graphene oxide for active packaging (2019) (51)
- Alkali lignin depolymerization under eco-friendly and cost-effective NaOH/urea aqueous solution for fast curing bio-based phenolic resin (2018) (51)
- Bio-based films with improved water resistance derived from soy protein isolate and stearic acid via bioconjugation (2019) (50)
- Tough, strong, and biodegradable composite film with excellent UV barrier performance comprising soy protein isolate, hyperbranched polyester, and cardanol derivative (2019) (50)
- Effects of heat treatment on wet shear strength of plywood bonded with soybean meal-based adhesive (2015) (50)
- Graphene materials-based chemiluminescence for sensing (2016) (50)
- Constructing a triple network structure to prepare strong, tough, and mildew resistant soy protein adhesive (2021) (49)
- Highly fluorinated and hierarchical HNTs/SiO2 hybrid particles for substrate-independent superamphiphobic coatings (2019) (49)
- Reduction of energy consumption of green plywood production by implementing high-efficiency thermal conductive bio-adhesive: Assessment from pilot-scaled application (2019) (49)
- Bioinspired design by gecko structure and mussel chemistry for bio-based adhesive system through incorporating natural fibers (2019) (48)
- Multiple crosslinking strategy to achieve high bonding strength and antibacterial properties of double-network soy adhesive (2020) (48)
- Depolymerization and characterization of Acacia mangium tannin for the preparation of mussel-inspired fast-curing tannin-based phenolic resins (2019) (48)
- Polyphenol-induced cellulose nanofibrils anchored graphene oxide as nanohybrids for strong yet tough soy protein nanocomposites. (2018) (47)
- Facile Fabrication of Self-Healable and Antibacterial Soy Protein-Based Films with High Mechanical Strength. (2019) (47)
- Preparation and characterization of microencapsulated ammonium polyphosphate with UMF and its application in WPCs (2014) (47)
- Phytic acid-assisted fabrication for soybean meal/nanofiber composite adhesive via bioinspired chelation reinforcement strategy. (2020) (46)
- Amine-terminated hyperbranched polyamide covalent functionalized graphene oxide-reinforced epoxy nanocomposites with enhanced toughness and mechanical properties (2019) (46)
- Bio-inspired cellulose nanofiber-reinforced soy protein resin adhesives with dopamine-induced codeposition of “water-resistant” interphases (2019) (45)
- Developing a stable high-performance soybean meal-based adhesive using a simple high-pressure homogenization technology (2020) (44)
- Bio-inspired co-deposition strategy of aramid fibers to improve performance of soy protein isolate-based adhesive (2020) (43)
- Preparation of a moderate viscosity, high performance and adequately-stabilized soy protein-based adhesive via recombination of protein molecules (2020) (43)
- Environmentally Benign Wood Modifications: A Review (2020) (43)
- High performance and multifunctional protein-based adhesive produced via phenol-amine chemistry and mineral reinforcement strategy inspired by arthropod cuticles (2021) (42)
- Bioinspired and biomineralized magnesium oxychloride cement with enhanced compressive strength and water resistance. (2020) (42)
- Properties of a soybean meal-based plywood adhesive modified by a commercial epoxy resin (2016) (42)
- In-Situ Chemosynthesis of ZnO Nanoparticles to Endow Wood with Antibacterial and UV-Resistance Properties (2017) (42)
- Preparation and Characterization of Chitosan/Soy Protein Isolate Nanocomposite Film Reinforced by Cu Nanoclusters (2017) (42)
- A High-Performance Soy Protein Isolate-Based Nanocomposite Film Modified with Microcrystalline Cellulose and Cu and Zn Nanoclusters (2017) (40)
- Surface Free Energy and Dynamic Wettability of Differently Machined Poplar Woods (2014) (40)
- Self-healable and biodegradable soy protein-based protective functional film with low cytotoxicity and high mechanical strength (2021) (40)
- Formulation of a novel soybean protein‐based wood adhesive with desired water resistance and technological applicability (2016) (40)
- Mechanical and thermal properties of microcrystalline cellulose-reinforced soy protein isolate–gelatin eco-friendly films (2015) (40)
- Wood-inspired nanocellulose aerogel adsorbents with excellent selective pollutants capture, superfast adsorption, and easy regeneration. (2021) (39)
- Investigating the use of peanut meal: a potential new resource for wood adhesives (2015) (38)
- From Wastes to Functions: A New Soybean Meal and Bark-Based Adhesive (2020) (37)
- Various polymeric monomers derived from renewable rosin for the modification of fast-growing poplar wood (2019) (37)
- Soy protein isolate-based films cross-linked by epoxidized soybean oil (2015) (37)
- SOYBEAN MEAL-BASED WOOD ADHESIVES ENHANCED BY MODIFIED POLYACRYLIC ACID SOLUTION (2012) (37)
- Tuning the phase structure and mechanical performance of magnesium oxychloride cements by curing temperature and H2O/MgCl2 ratio (2018) (36)
- A high-performance bio-adhesive derived from soy protein isolate and condensed tannins (2017) (36)
- On the structure and cure acceleration of phenol-urea-formaldehyde resins with different catalysts (2009) (36)
- Bioinspired interface engineering of soybean meal-based adhesive incorporated with biomineralized cellulose nanofibrils and a functional aminoclay (2021) (36)
- Physicochemical properties of modified soybean-flour adhesives enhanced by carboxylated styrene-butadiene rubber latex (2016) (36)
- A new soybean meal-based bioadhesive enhanced with 5,5-dimethyl hydantoin polyepoxide for the improved water resistance of plywood (2015) (35)
- A high performance soy protein-based bio-adhesive enhanced with a melamine/epichlorohydrin prepolymer and its application on plywood (2016) (35)
- Dry, hydrophobic microfibrillated cellulose powder obtained in a simple procedure using alkyl ketene dimer (2016) (35)
- Dual-Network Nanocross-linking Strategy to Improve Bulk Mechanical and Water-Resistant Adhesion Properties of Biobased Wood Adhesives (2020) (34)
- Scalable Fabrication of Natural-Fiber Reinforced Composites with Electromagnetic Interference Shielding Properties by Incorporating Powdered Activated Carbon (2015) (34)
- Combined treatment for conversion of fast-growing poplar wood to magnetic wood with high dimensional stability (2016) (34)
- Endogenous Cu and Zn nanocluster-regulated soy protein isolate films: excellent hydrophobicity and flexibility (2015) (34)
- Preparation of Wood Adhesives Based on Soybean Meal Modified with PEGDA as a Crosslinker and Viscosity Reducer (2013) (33)
- Development of Eco-friendly Soy Protein Isolate Films with High Mechanical Properties through HNTs, PVA, and PTGE Synergism Effect (2017) (33)
- 13C‐NMR study on the structure of phenol‐urea‐formaldehyde resins prepared by methylolureas and phenol (2009) (32)
- Robust, self-cleaning, anti-fouling, superamphiphobic soy protein isolate composite films using spray-coating technique with fluorinated HNTs/SiO2 (2019) (32)
- A novel application of silicone-based flame-retardant adhesive in plywood. (2018) (32)
- Research progress on double-network hydrogels (2021) (32)
- Synthesis and Mechanism of Metal-Mediated Polymerization of Phenolic Resins (2016) (32)
- Preparation of Stable Superhydrophobic Coatings on Wood Substrate Surfaces via Mussel-Inspired Polydopamine and Electroless Deposition Methods (2017) (31)
- Preparation and demonstration of poly(dopamine)-triggered attapulgite-anchored polyurethane as a high-performance rod-like elastomer to reinforce soy protein-isolated composites (2018) (31)
- Polyurethane as high-functionality crosslinker for constructing thermally driven dual-crosslinking plant protein adhesion system with integrated strength and ductility (2021) (31)
- Synergistic effect of synthetic zeolites on flame-retardant wood-flour/polypropylene composites (2015) (31)
- Reinforcement of interfacial and bonding strength of soybean meal-based adhesive via kenaf fiber–CaCO3 anchored N-cyclohexyl-2-benzothiazole sulfenamide (2018) (31)
- Effect of microencapsulated ammonium polyphosphate on flame retardancy and mechanical properties of wood flour/polypropylene composites (2016) (31)
- Mussel byssus-inspired engineering of synergistic nanointerfacial interactions as sacrificial bonds into carbon nanotube-reinforced soy protein/nanofibrillated cellulose nanocomposites: versatile mechanical enhancement (2018) (30)
- Highly hydrophobic and self-cleaning bulk wood prepared by grafting long-chain alkyl onto wood cell walls (2017) (30)
- Design, Development, and Outlook of Superwettability Membranes in Oil/Water Emulsions Separation (2021) (29)
- A high-performance soybean meal-based plywood adhesive prepared via an ultrasonic process and using significantly lower amounts of chemical additives (2020) (29)
- Assessment on emission of volatile organic compounds and formaldehyde from building materials (2013) (29)
- Novel Bionic Soy Protein-Based Adhesive with Excellent Prepressing Adhesion, Flame Retardancy, and Mildew Resistance. (2021) (29)
- Assessment of the Performance of Furfurylated Wood and Acetylated Wood: Comparison among Four Fast-Growing Wood Species (2016) (28)
- A sepiolite-based united cross-linked network in a soybean meal-based wood adhesive and its performance (2016) (28)
- Oxidation behavior of 3D C/SiC composites in two oxidizing environments (2001) (28)
- Effects of Different Denaturants on Properties and Performance of Soy Protein-Based Adhesive (2019) (28)
- Effect of Ammonium Polyphosphate to Aluminum Hydroxide Mass Ratio on the Properties of Wood-Flour/Polypropylene Composites (2017) (28)
- Effects of temperature and stress on the oxidation behavior of a 3D C/SiC composite in a combustion wind tunnel (2010) (28)
- Biomimetic water-in-oil water/pMDI emulsion as an excellent ecofriendly adhesive for bonding wood-based composites. (2020) (28)
- SOYBEAN MEAL-BASED ADHESIVE REINFORCED WITH CELLULOSE NANO-WHISKERS (2012) (28)
- Improvement in Functional Properties of Soy Protein Isolate-Based Film by Cellulose Nanocrystal–Graphene Artificial Nacre Nanocomposite (2017) (28)
- Effect of Melamine Allocation Proportion on Chemical Structures and Properties of Melamine-Urea-Formaldehyde Resins (2015) (27)
- A High‐Performance Bio‐Adhesive Using Hyperbranched Aminated Soybean Polysaccharide and Bio‐Based Epoxide (2020) (27)
- Properties of Acetylated Wood Prepared at Low Temperature in the Presence of Catalysts (2009) (27)
- Properties of Soy Protein Isolate Biopolymer Film Modified by Graphene (2017) (27)
- Toughening and Enhancing Melamine–Urea–Formaldehyde Resin Properties via in situ Polymerization of Dialdehyde Starch and Microphase Separation (2019) (27)
- Facile fabrication of tough, strong, and biodegradable soy protein-based composite films with excellent UV-blocking performance (2021) (27)
- Enhancement of mechanical and thermal properties of Poplar through the treatment of glyoxal-urea/nano-SiO2 (2015) (27)
- Utilization of decayed wood for polyvinyl chloride/wood flour composites (2021) (27)
- Improving dimensional stability and durability of wood polymer composites by grafting polystyrene onto wood cell walls (2018) (27)
- Preparation and Characterization of All-Biomass Soy Protein Isolate-Based Films Enhanced by Epoxy Castor Oil Acid Sodium and Hydroxypropyl Cellulose (2016) (26)
- A general bio-inspired, novel interface engineering strategy toward strong yet tough protein based composites (2018) (26)
- Surface Microencapsulated Ammonium Polyphosphate With Beta-Cyclodextrin and Its Application in Wood-Flour/Polypropylene Composites (2017) (26)
- Bioinspired hyperbranched protein adhesive based on boronic acid-functionalized cellulose nanofibril and water-soluble polyester (2021) (26)
- Characterization and acid-catalysed depolymerization of condensed tannins derived from larch bark (2017) (26)
- Preparation of Reinforced Soy Protein Adhesive Using Silane Coupling Agent as an Enhancer (2014) (26)
- Development of conductive protein-based film reinforced by cellulose nanofibril template-directed hyperbranched copolymer. (2020) (25)
- High bonding strength and boiling water resistance of soy protein‐based adhesives via organosilicon–acrylate microemulsion and epoxy synergistic interfacial enhancement (2018) (25)
- Nature-Inspired Green Procedure for Improving Performance of Protein-Based Nanocomposites via Introduction of Nanofibrillated Cellulose-Stablized Graphene/Carbon Nanotubes Hybrid (2018) (25)
- Soy protein as a sustainable surfactant to functionalize boron nitride nanosheets and its application for preparing thermally conductive biobased composites (2019) (25)
- Structural Properties and Copolycondensation Mechanism of Valonea Tannin-Modified Phenol-formaldehyde Resin (2018) (24)
- Sodium alginate-assisted route to antimicrobial biopolymer film combined with aminoclay for enhanced mechanical behaviors (2019) (24)
- Preparation of a Strong, Mildew-Resistant, and Flame-Retardant Biomimetic Multifunctional Soy Protein Adhesive Via the Construction of an Organic-Inorganic Hybrid Multiple-Bonding Structure (2022) (24)
- Wettability of Sanded and Aged Fast-growing Poplar Wood Surfaces: I. Surface Free Energy (2014) (24)
- A tough, adhesive, self-healable, and antibacterial plant-inspired hydrogel based on pyrogallol-borax dynamic cross-linking. (2021) (23)
- Bioinspired mineral–organic strategy for fabricating a high-strength, antibacterial, flame-retardant soy protein bioplastic via internal boron–nitrogen coordination (2022) (23)
- Glycidyl Methacrylate Grafted onto Enzyme-Treated Soybean Meal Adhesive with Improved Wet Shear Strength (2013) (23)
- Preparation and characterization of poly(vinyl alcohol) and 1,2,3‐propanetriol diglycidyl ether incorporated soy protein isolate‐based films (2015) (23)
- A Low-Cost, Formaldehyde-Free and High Flame Retardancy Wood Adhesive from Inorganic Adhesives: Properties and Performance (2017) (23)
- Nacre-Inspired Strong and Multifunctional Soy Protein-Based Nanocomposite Materials for Easy Heat-Dissipative Mobile Phone Shell. (2021) (22)
- A New Flexible Soy-Based Adhesive Enhanced with Neopentyl Glycol Diglycidyl Ether: Properties and Application (2016) (22)
- Development of soy protein-based adhesive with high water resistance and bonding strength by waterborne epoxy crosslinking strategy (2020) (22)
- Improved Adhesion Performance of Soy Protein-Based Adhesives with a Larch Tannin-Based Resin (2017) (22)
- Synthesis and Characterization of Pure Copper Nanostructures Using Wood Inherent Architecture as a Natural Template (2018) (22)
- Assembly of graphene oxide into the hyperbranched frameworks for the fabrication of flexible protein-based films with enhanced conductivities (2020) (22)
- Effects of polyisocyanate on properties and pot life of epoxy resin cross-linked soybean meal-based bioadhesive (2016) (22)
- Improving Bond Performance and Reducing Cross-linker Dosage for Soy Flour Adhesives Inspired by Spider Silk (2020) (21)
- Dual-functional natural-fiber reinforced composites by incorporating magnetite (2016) (21)
- A soybean meal-based wood adhesive improved by a diethylene glycol diglycidyl ether: properties and performance (2016) (21)
- Performances of larch (larix gmelini) tannin modified urea–formaldehyde (TUF) resin and plywood bonded by TUF resin (2014) (21)
- Soy meal adhesive with high strength and water resistance via carboxymethylated wood fiber-induced crosslinking (2021) (21)
- Development of soybeans starch based tough, water resistant and mildew-proof adhesives through multiple cross linking cooperation strategy (2021) (21)
- Mussel-inspired chemistry for preparation of superhydrophobic surfaces on porous substrates (2017) (21)
- Multiple Hydrogen Bonding Enables Strong, Tough, and Recyclable Soy Protein Films (2020) (21)
- Binding Cellulose and Chitosan via Intermolecular Inclusion Interaction: Synthesis and Characterisation of Gel (2015) (21)
- Bioinspired mineral–organic hybridization strategy to produce a green high performance soybean meal based adhesive (2021) (21)
- Microfibrillated Lignocellulose Enables the Suspension-Polymerisation of Unsaturated Polyester Resin for Novel Composite Applications (2016) (20)
- Evaluation of anti-mold, termite resistance and physical-mechanical properties of bamboo cross-linking modified by polycarboxylic acids (2021) (20)
- A Novel Eco-friendly Blood Meal-based Bio-adhesive: Preparation and Performance (2018) (20)
- Physico-Chemical Properties of Soybean Meal-Based Adhesives Reinforced by Ethylene Glycol Diglycidyl Ether and Modified Nanocrystalline Cellulose (2017) (20)
- Plant Polyphenol‐Inspired Crosslinking Strategy toward High Bonding Strength and Mildew Resistance for Soy Protein Adhesives (2021) (20)
- The Effect of Enzymolysis on Performance of Soy Protein-Based Adhesive (2018) (20)
- A bio-inspired multifunctional soy protein-based material: From strong underwater adhesion to 3D printing (2021) (19)
- Improve the Performance of Soy Protein-Based Adhesives by a Polyurethane Elastomer (2018) (19)
- Spider silk-inspired high-performance soybean meal-based adhesive reinforced by greenly produced chitosan-functionalized boron nitride nanosheets (2022) (19)
- Bioinspired dual-crosslinking strategy for fabricating soy protein-based adhesives with excellent mechanical strength and antibacterial activity (2022) (19)
- EFFECT OF MODIFICATION WITH MELAMINE–UREA–FORMALDEHYDE RESIN ON THE PROPERTIES OF EUCALYPTUS AND POPLAR (2019) (19)
- Improvement of interfacial interaction in impregnated wood via grafting methyl methacrylate onto wood cell walls (2020) (19)
- A high bonding performance and antibacterial soybean meal adhesive with Maillard reaction based cross-linked structure (2021) (19)
- Transparent wood developed by introducing epoxy vitrimers into a delignified wood template (2021) (19)
- Mussel-inspired codepositing interconnected polypyrrole nanohybrids onto cellulose nanofiber networks for fabricating flexible conductive biobased composites. (2019) (18)
- Identification and evaluation of antioxidant activities of bamboo extracts (2004) (18)
- Preparation of a high bonding performance soybean protein-based adhesive with low crosslinker addition via microwave chemistry. (2022) (18)
- Toward Utilization of Agricultural Wastes: Development of a Novel Keratin Reinforced Soybean Meal-based Adhesive (2021) (18)
- Degradation mechanism of Acacia mangium tannin in NaOH/urea aqueous solution and application of degradation products in phenolic adhesives (2020) (18)
- Organic-inorganic nanohybrid polyurethane elastomer based on dopamine-mediated biomimetic co-deposition thought toward multiple improved properties (2019) (18)
- Hyperbranched Catechol Biomineralization For Preparing Super Antibacterial and Fire-Resistant Soy Protein Adhesive with Long-Term Adhesion (2022) (18)
- Effects of Hot-Pressing Parameters on Shear Strength of Plywood Bonded with Modified Soy Protein Adhesives (2014) (17)
- "Green" Flexible Electronics: Biodegradable and Mechanically Strong Soy Protein-Based Nanocomposite Films for Human Motion Monitoring. (2021) (17)
- Bioinspired interface design of multifunctional soy protein-based biomaterials with excellent mechanical strength and UV-blocking performance (2021) (17)
- Simultaneously Toughening and Strengthening Soy Protein Isolate-Based Composites via Carboxymethylated Chitosan and Halloysite Nanotube Hybridization (2017) (17)
- Grafting polyethylene glycol dicrylate (PEGDA) to cell walls of poplar wood in two steps for improving dimensional stability and durability of the wood polymer composite (2016) (17)
- Effect of coupling agent modified intumescent flame retardant on the mechanical properties, thermal degradation behavior, and flame retardancy of wood‐flour/polypropylene composites (2018) (16)
- A strong magnesium oxychloride cement wood adhesive via organic–inorganic hybrid (2021) (16)
- Flexible Lignin-based hydrogels with Self-healing and adhesive ability driven by noncovalent interactions (2022) (16)
- Improved Water Resistance of Soybean Meal-based Adhesive with SDS and PAM (2014) (16)
- A High-Performance and Low-Cost Soy Flour Adhesive with a Hydroxymethyl Melamine Prepolymer (2018) (16)
- Mussel‐inspired bio‐based water‐resistant soy adhesives with low‐cost dopamine analogue‐modified silkworm silk Fiber (2020) (16)
- Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin (2017) (16)
- Improvement of Interfacial Adhesion by Bio-Inspired Catechol-Functionalized Soy Protein with Versatile Reactivity: Preparation of Fully Utilizable Soy-Based Film (2017) (16)
- A hair fiber inspired bio-based adhesive with high bonding strength and mildew tolerance (2022) (15)
- Chemical Structure and Curing Behavior of Phenol–Urea–Formaldehyde Cocondensed Resins of High Urea Content (2009) (15)
- Full Bio‐Based Soy Protein Isolate Film Enhanced by Chicken Feather Keratin (2021) (15)
- Characterization and Application of Urea-Formaldehyde-Furfural Co-condensed Resins as Wood Adhesives (2014) (15)
- Dimensional Stability and Flame Resistance of Silicate-Acetylated and -Propionylated Wood Composites (2000) (14)
- Fabrication of homogeneous and enhanced soybean protein isolate-based composite films via incorporating TEMPO oxidized nanofibrillated cellulose stablized nano-ZnO hybrid (2017) (14)
- Reviewing wood-based solar-driven interfacial evaporators for desalination. (2022) (14)
- The Effects of Sealing Treatment and Wood Species on Formaldehyde Emission of Plywood (2013) (14)
- Pyrolysis kinetics of tannin–phenol–formaldehyde resin by non-isothermal thermogravimetric analysis (2015) (14)
- Preparation of a strong soy protein adhesive with mildew proof, flame-retardant, and electromagnetic shielding properties via constructing nanophase-reinforced organic–inorganic hybrid structure (2022) (14)
- Optimization of reaction parameters and characterization of glyoxal-treated poplar sapwood (2015) (13)
- Thermal properties enhancement of poplar wood by substituting poly(furfuryl alcohol) for the matrix (2020) (13)
- The preparation of a highly stretchable cellulose nanowhisker nanocomposite hydrogel (2015) (13)
- Bulk superhydrophobility of wood via in-situ deposition of ZnO rods in wood structure (2020) (13)
- A green bio-inspired chelating design for improving the electrical conductivity of flexible biopolymer-based composites (2021) (13)
- Soybean Meal-Based Wood Adhesive Enhanced by Phenol Hydroxymethylated Tannin Oligomer for Exterior Use (2020) (13)
- High strength and flame retardant soybean polysaccharide-based wood adhesive produced by borate chemistry and crosslinking strategy (2021) (13)
- Facile design of tough, strong, and UV-shielding soy protein-based composite films (2021) (13)
- High‐performance imitation precious wood from low‐cost poplar wood via high‐rate permeability of phenolic resins (2018) (13)
- Effect of Pentaerythritol on the Properties of Wood-Flour/Polypropylene/Ammonium Polyphosphate Composite System (2015) (12)
- Reactivity of Larch and Valonia Tannins in Synthesis of Tannin-Formaldehyde Resins (2016) (12)
- Facile strategy of mussel-inspired polymer as a high-performance dry/wet adhesive (2021) (12)
- Improved Plywood Strength and Lowered Emissions from Soybean Meal/Melamine Urea-Formaldehyde Adhesives (2011) (12)
- Wettability of Sanded and Aged Fast-growing Poplar Wood Surfaces: II. Dynamic Wetting Models (2014) (12)
- Evaluation of optical properties and chemical structure changes in enzymatic hydrolysis lignin during heat treatment (2017) (12)
- Effect of Sepiolite Filler in Malamine-Urea-Formaldehyde Resin on the Properties of Three-ply Plywood (2015) (12)
- Preparation of tannin–formaldehyde–furfural resin with pretreatment of depolymerization of condensed tannin and ring opening of furfural (2016) (12)
- Urea Formaldehyde Resin Resultant Plywood with Rapid Formaldehyde Release Modified by Tunnel-Structured Sepiolite (2019) (12)
- Design and build an elastic crosslinked network to strengthen and toughen soybean-meal based bioadhesive using organo-sepiolite and greener crosslinker triglycidylamine (2020) (12)
- Synthesis of Amino-Functionalized Waste Wood Flour Adsorbent for High-Capacity Pb(II) Adsorption (2019) (12)
- A water-resistant and mildewproof soy protein adhesive enhanced by epoxidized xylitol (2022) (12)
- Characterization of Microstructure, Chemical, and Physical Properties of Delignified and Densified Poplar Wood (2021) (12)
- Microwave induced construction of multiple networks for multifunctional soy protein-based materials (2021) (12)
- In situ synthesis of ABA triblock copolymer nanoparticles by seeded RAFT polymerization: Effect of the chain length of the third a block on the triblock copolymer morphology (2015) (11)
- Constructing SiO2 nanohybrid to develop a strong soy protein adhesive with excellent flame-retardant and coating ability (2022) (11)
- Coordination-Driven Controlled Assembly of Polyphenol-Metal Green Coating on Wood Micro-Grooved Surfaces: A Novel Approach to Stable Superhydrophobicity (2017) (11)
- Designing Biomimetic Microphase‐Separated Motifs to Construct Mechanically Robust Plant Protein Resin with Improved Water‐Resistant Performance (2020) (11)
- An easy-coating, versatile, and strong soy flour adhesive via a biomineralized structure combined with a biomimetic brush-like polymer (2022) (11)
- A Tough and Mildew-Proof Soybean-Based Adhesive Inspired by Mussel and Algae (2020) (11)
- Novel Low-Temperature Chemical Vapor Deposition of Hydrothermal Delignified Wood for Hydrophobic Property (2020) (11)
- Sandcastle worm-inspired phytic acid and magnesium oxychloride cement copolymerization for performance enhancement. (2020) (11)
- A tough, anti-mildew and anti-counterfeiting soybean protein adhesive enhanced by gecko-inspired functional fiber and bio-based epoxide (2021) (11)
- Thiol-branched graphene oxide and polydopamine-induced nanofibrillated cellulose to strengthen protein-based nanocomposite films (2019) (11)
- EFFECTS OF ETHYLENE VINYL ACETATE CONTENT ON PHYSICAL AND MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITES (2012) (11)
- Tough and strong biomimetic soy protein films with excellent UV-shielding performance (2021) (11)
- Surface colour and chemical changes of furfurylated poplar wood and bamboo due to artificial weathering (2020) (11)
- Surface colour and chemical changes of furfurylated poplar wood and bamboo due to artificial weathering (2020) (11)
- Mechanically robust nacre-mimetic framework constructed polypyrrole-doped graphene/nanofiber nanocomposites with improved thermal electrical properties (2018) (11)
- Bioinspired phenol-amine chemistry for developing bioadhesives based on biomineralized cellulose nanocrystals. (2022) (10)
- Preparation of water-resistant soybean meal-based adhesives with waste paper cellulose via NaOH/urea pretreatment and oxidation (2020) (10)
- Cure properties and adhesive performances of cure-accelerated phenol-urea-formaldehyde resins (2011) (10)
- Aging Resistance Properties of Poplar Plywood Bonded by Soy Protein-Based Adhesive (2016) (10)
- Perm‐Inspired High‐Performance Soy Protein Isolate and Chicken Feather Keratin‐Based Wood Adhesive without External Crosslinker (2021) (10)
- Crosslinked chitosan-based biocomposite films modified with soy protein isolate (2018) (10)
- Preparation of a strong and multiple-function soybean flour adhesive via the construction of tannin microspheres with a core–shell structure (2022) (10)
- A soy protein-based film by mixed covalent cross-linking and flexibilizing networks (2022) (10)
- An Eco-Effective Soybean Meal-Based Adhesive Enhanced with Diglycidyl Resorcinol Ether (2020) (10)
- Biomimetic lignin-protein adhesive with dynamic covalent/hydrogen hybrid networks enables high bonding performance and wood-based panel recycling. (2022) (10)
- Recyclable, Self‐Healing Solid Polymer Electrolytes by Soy Protein‐Based Dynamic Network (2022) (10)
- Effects of Assembly Time on Wet Shear Strength and Formaldehyde Emission of Plywood Bonded by Urea Formaldehyde Resin (2014) (10)
- Effect of Synthesis Conditions on the Structure and Curing Characteristics of High-Urea Content PUF Resin (2011) (10)
- Construction of thorough cross-linked networks in soybean meal adhesive system by biomimetic boronic acid-anchored cellulose nanofibril for multifunctionality of high-performance, mildew resistance, anti-bacterial, and flame resistance (2022) (10)
- Effect of Hot-Pressing Temperature on Characteristics of Straw-Based Binderless Fiberboards with Pulping Effluent (2019) (10)
- Hybrid HNTs-kenaf fiber modified soybean meal-based adhesive with PTGE for synergistic reinforcement of wet bonding strength and toughness (2018) (9)
- Biomimetic development of a strong, mildew-resistant soy protein adhesive via mineral–organic system and phenol-amine synergy (2022) (9)
- Magnesium oxychloride cement reinforced via D-gluconic acid sodium salt for slow-curing, with enhanced compressive strength and water resistance (2021) (9)
- A Tough, Water-Resistant, High Bond Strength Adhesive Derived from Soybean Meal and Flexible Hyper-Branched Aminated Starch (2019) (9)
- Thermo‐controlled, self‐released smart wood tailored by nanotechnology for fast clean‐up of highly viscous liquids (2022) (9)
- Dopamine-Mediated Pre-Crosslinked Cellulose/Polyurethane Block Elastomer for the Preparation of Robust Biocomposites (2018) (9)
- Effects of resin open time and melamine addition on cold pre-pressing performance of a urea–formaldehyde resin (2018) (9)
- A tannin-functionalized soy protein-based adhesive hydrogel as a wound dressing (2022) (9)
- Improving Dimensional and Thermal Stability of Poplar Wood via Aluminum-based Sol-Gel and Furfurylation Combination Treatment (2017) (9)
- Hydrothermal preparation of boehmite-doped AgCl nanocubes and their characterization (2011) (9)
- Improvement of wood properties by urea-formaldehyde resin and nano-SiO2 (2007) (9)
- Lignin-Based Phenolic Foam Reinforced by Poplar Fiber and Isocyanate-Terminated Polyurethane Prepolymer (2021) (9)
- A 3D smart wood membrane with high flux and efficiency for separation of stabilized oil/water emulsions. (2022) (8)
- WOOD PROPIONYLATION IN THE PRESENCE OF CATALYSTS (2007) (8)
- MALDI-TOF MS analysis of the acceleration of the curing of phenol–formaldehyde (PF) resins induced by propylene carbonate (2014) (8)
- Bioinspired Organic–Inorganic Hybrid Magnesium Oxychloride Cement via Chitosan and Tartaric Acid (2020) (8)
- Modification of block copolymer vesicles: what will happen when AB diblock copolymer is block-extended to an ABC triblock terpolymer? (2015) (8)
- Durable, flexible, and super‐hydrophobic wood membrane with nanopore by molecular cross‐linking for efficient separation of stabilized water/oil emulsions (2022) (8)
- Development of a High-Performance Adhesive with a Microphase, Separation Crosslinking Structure Using Wheat Flour and a Hydroxymethyl Melamine Prepolymer (2019) (8)
- Preliminary study of the effects of EVA coupling agents on properties of wood-plastic composites (2010) (8)
- A simple design of mechanically robust, recyclable, and biodegradable composite films with high thermal stability and fluorescent properties (2021) (8)
- Preparation of mechanical abrasion and corrosion resistant bulk highly hydrophobic material based on 3-D wood template (2016) (8)
- Evaluation performance of soybean meal and peanut meal blends-based wood adhesive (2022) (8)
- Effects of Maleic Anhydride Grafted Polypropylene on the Physical, Mechanical and Flammability Properties of Wood-flour/Polypropylene/Ammonium Polyphosphate Composites (2021) (8)
- Dynamic mechanical analysis (DMA) of urea formaldehyde (UF) resin modified by ammonium pentaborate (APB) as wood adhesive (2016) (8)
- Effect of Catalysts and Sodium Hydroxide on Glyoxal-treated Wood (2014) (8)
- A Novel Universal Strategy for Fabricating Soybean Protein Adhesive with Excellent Adhesion and Anti-mildew Performances (2022) (8)
- Performance of soybean protein adhesive cross-linked by lignin and cuprum (2022) (8)
- INFLUENCE OF URON RESINS ON THE PERFORMANCE OF UF RESINS AS ADHESIVES FOR PLYWOOD (2012) (8)
- Utilization of hydrophilic/hydrophobic hyperbranched poly(amidoamine)s as additives for melamine urea formaldehyde adhesives (2015) (8)
- Scalable, Large-size, and Flexible Transparent Bamboo (2022) (7)
- Determination of formaldehyde and TVOC emission behavior from interior use plywood using various post heat treatment processes (2017) (7)
- Effects of diatomite inorganic fillers on the properties of a melamine-urea-formaldehyde resin (2016) (7)
- Mussel‐inspired polymer materials derived from nonphytogenic and phytogenic catechol derivatives and their applications (2021) (7)
- Bioinspired super-tough and multifunctional soy protein-based material via a facile approach (2021) (7)
- Highly dispersed manganese dioxide nanoparticles anchored on diatomite surface by sol–gel method and its performance on soybean meal‐based adhesive (2021) (7)
- The Study of Intermolecular Inclusion in Cellulose Physical Gels (2014) (7)
- High-performance adhesives formulated from soy protein isolate and bio-based material hybrid for plywood production (2022) (7)
- Reversible complexation/disassembly of thermo-responsive vesicles and nanospheres of diblock copolymers synthesized by dispersion RAFT polymerization (2015) (7)
- Simultaneously strengthening and toughening soy protein isolate-based films using poly(ethylene glycol)- block -polystyrene (PEG- b -PS) nanoparticles (2016) (7)
- Marine sponge spicules-inspired magnesium oxychloride cement with both enhanced water resistance and compressive strength via incorporating acid-activated palygorskite (2020) (7)
- A mussel‐inspired strategy toward antimicrobial and bacterially anti‐adhesive soy protein surface (2020) (7)
- Acacia mangium tannin functionalized graphene nanoplatelets produced via ball-milling for sustainable soy protein-based film (2022) (6)
- High-Performance Soy Protein Isolate-Based Film Synergistically Enhanced by Waterborne Epoxy and Mussel-Inspired Poly(dopamine)-Decorated Silk Fiber (2019) (6)
- Shape-reconfigurable transparent wood based on solid-state plasticity of polythiourethane for smart building materials with tunable light guiding, energy saving, and fire alarm actuating functions (2022) (6)
- Polyborosilazane‐Derived High Temperature Resistant SiBCNO (2019) (6)
- Development of a strong soy protein-based adhesive with excellent antibacterial and antimildew properties via biomineralized silver nanoparticles (2022) (6)
- Dynamic mechanical properties and thermal stability of furfuryl alcohol and nano-SiO2 treated poplar wood (2015) (6)
- A Highly Water-Resistant Soy-Based Bioadhesive with 1,4-Butanediol Diglycidyl Ether and its Application on Plywood (2017) (6)
- An ultrastrong, reversible thermochromic film based on TEMPO-oxidized nanofibrillated cellulose (2021) (6)
- Hyperbranched Poly(amidoamine)s as Additives for Urea Formaldehyde Resin and Their Application in Particleboard Fabrication (2014) (6)
- Development of a multifunctional nanocomposite film with record-high ultralow temperature toughness and unprecedented fatigue-resistance (2021) (6)
- Synthesis of ultra-high strength structured material from steam-modified delignification of wood (2022) (6)
- Alkyl ethoxylate assisted liquid phase exfoliation of BN nanosheet and its application as interphase for oxide/oxide composites (2018) (6)
- Eco-friendly soy protein isolate-based films strengthened by water-soluble glycerin epoxy resin (2022) (6)
- A biomimetic adhesive with high adhesion strength and toughness comprising soybean meal, chitosan, and condensed tannin-functionalized boron nitride nanosheets. (2022) (6)
- Curing properties of high-Ortho phenol-formaldehyde resins with co-catalysis (2018) (5)
- Research Progress of Soybean Protein Adhesive: A Review (2022) (5)
- Effect of p-Cumylphenol on the Mold Resistance of Modified Soybean Flour Adhesive and Poplar Plywood (2015) (5)
- A Soy Protein-Based Composite Film with a Hierarchical Structure Inspired by Nacre (2022) (5)
- Erratum to: Dry, hydrophobic microfibrillated cellulose powder obtained in a simple procedure using alkyl ketene dimer (2016) (5)
- A biomimetic Janus delignified wood membrane with asymmetric wettability prepared by thiol-ol chemistry for unidirectional water transport and selective oil/water separation (2022) (5)
- Improving the coating and prepressing properties of soybean meal adhesive by constructing a biomimetic topological structure (2022) (5)
- A novel sintering additive system for porous mullite-bonded SiC ceramics: High mechanical performance with controllable pore structure (2021) (5)
- Tough Thermosensitive Hydrogel with Excellent Adhesion to Low-Energy Surface Developed via Nanoparticle-Induced Dynamic Crosslinking (2021) (5)
- In-situ growth of polyoxometalate-based metal-organic frameworks on wood as a promising dual-function filter for effective hazardous dye and iodine capture (2022) (4)
- A bio-based adhesive reinforced with functionalized nanomaterials to build multiple strong and weak cross-linked networks with high strength and excellent mold resistance (2023) (4)
- Highly hydrophobic and self-cleaning bulk wood prepared by grafting long-chain alkyl onto wood cell walls (2016) (4)
- Biomass-based functional film integrated with nitrogen-coordinating boronic ester and cellulose-barium titanate nanohybrids (2022) (4)
- Tannin-modified magnesium oxychloride cement with high-strength and reinforced water-resistance (2022) (4)
- Properties of Colloidal Silica‐Fixed and Propionylated Wood Composite (II): Flame Resistance and Other Properties of the Composites (2005) (4)
- Improvement of physical and mechanical properties of poplar wood via immobilization of rosin by grafting of vinyl chains (2021) (4)
- Organic-inorganic hybrid network to enhance the electrostatic shielding of multifunctional soybean meal-based adhesive (2022) (4)
- Tough protein based adhesive reinforced by molecular spring strengthening strategy (2022) (4)
- Bioinspired fabrication of self-recovery, adhesive, and flexible conductive hydrogel sensor driven by dynamic borate ester bonds and tannic acid-mediated noncovalent network (2022) (4)
- Effects of Pressure from High‐Pressure Homogenization on the Performance of Soybean Flour Based‐Adhesive (2020) (4)
- Multiple crosslinking bionanocomposites reinforced with mussel‐inspired poly(dopamine) surface modified nanoclay: Construction, properties, and characterization (2018) (4)
- An ultrastrong bioinspired soy protein isolate-based nanocomposite with graphene oxide intercalation (2022) (4)
- Reinforcement of Bonding Strength and Water Resistance of Soybean Meal-Based Adhesive via Construction of an Interactive Network from Biomass Residues (2019) (4)
- Effect of Mussel‐Inspired Poly(Dopamine)‐Functionalized Carbon Nanotubes/Graphene Nanohybrids on Interfacial Adhesion of Soy Protein‐Based Nanocomposites (2018) (4)
- A polydimethylsiloxane-based sponge for water purification and interfacial solar steam generation. (2022) (3)
- In Situ Growth of Cofs within Wood Microchannels for Wastewater Treatment and Oil-Water Separation (2022) (3)
- Biomimetic soy protein‐based exterior‐use films with excellent UV ‐blocking performance from catechol derivative Acacia mangium tannin (2020) (3)
- Transforming municipal cotton waste into a multilayer fibre biocomposite with high strength. (2022) (3)
- Enhancement of Removal of VOCs and Odors from Wood by Microwave-Activated Persulfate (2021) (3)
- Nacre‐inspired construction of soft–hard double network structure to prepare strong, tough, and water‐resistant soy protein adhesive (2022) (3)
- Editable shape-memory transparent wood based on epoxy-based dynamic covalent polymer with excellent optical and thermal management for smart building materials (2022) (3)
- Nature-Inspired Phytic Acid-Based Hybrid Complexes for Fabricating Green and Transparent Superhydrophobic and Anti-Mildew Coating on Bamboo Surface (2022) (3)
- Synthesis and characterization of nitrogen-phosphorus-based fire retardants modified by boride/propanetriol flyeidyl ether complex (2015) (3)
- Evaluation of natural weathering and thermal degradation behavior of furfurylated bamboo strips at different weight percent gain (2022) (2)
- Thermal and flame-retardant properties of multilayered composites prepared through novel multilayering approach. (2022) (2)
- Properties of Colloidal Silica‐Fixed and Propionylated Wood Composites (I): Preparation and Dimensional Stability of the Composites (2005) (2)
- Improving coating and prepressing performance of soy protein-based adhesive by constructing a dual-bionic topological structure (2023) (2)
- Polysaccharide‐Based Adhesives: A High‐Performance Bio‐Adhesive Using Hyperbranched Aminated Soybean Polysaccharide and Bio‐Based Epoxide (Adv. Mater. Interfaces 9/2020) (2020) (2)
- Developments in Bio‐Based Soy Protein Adhesives: A Review (2022) (2)
- In‐Situ Formation of Mullite strengthened SiC Porous Ceramics via Gelcasting with High Strength and Good Alkali Resistance (2022) (2)
- Cuttlebone-inspired magnesium oxychloride cement reinforced by biochar as green adhesive for wood industry (2022) (2)
- Development of strong, tough and flame-retardant phenolic resins by using Acacia mangium tannin-functionalized graphene nanoplatelets. (2022) (2)
- A biosensor material with robust mechanical properties, fatigue-resistance, biocompatibility, biodegradability, and anti-freezing capabilities (2022) (2)
- Preparation of biomimetic functionalized hierarchical bamboo fibers for reinforcing plant protein-based adhesives (2022) (2)
- Spider Silk Inspired Robust and Photoluminescent Soybean‐Protein‐Based Materials (2021) (2)
- Study of Amino Polymer Modified Soy Protein Adhesive (2011) (2)
- Lightweight, bacteriostatic and thermally conductive wood plastic composite prepared by chitosan modified biointerfaces (2023) (2)
- Preparation and properties of soybean protein adhesive modified by chitosan/tannic-silver nanocomposite (2022) (1)
- A soy protein-based adhesive with improved mechanical and electromagnetic shielding properties by employment of core@double-shell BT@PDA@PANI fillers (2023) (1)
- Performance improvement of magnesium oxychloride cement via nanoparticles-enhanced organic–inorganic hybrid network (2022) (1)
- Nacre-inspired high-performance multifunctional plant protein adhesive through vitrimer networks (2023) (1)
- Research Progress in the Chemical Modification of Eucalyptus (2019) (1)
- Evaluation of the interactions of typical wood extracts on the bonding performance of soybean-based adhesives (2022) (1)
- Paraffin Pickering Emulsion Stabilized with Nano-SiO2 Designed for Wood Impregnation (2020) (1)
- Marine Sponge-Inspired Organic–Inorganic Double-Network Strategy to Produce Magnesium Oxychloride Cement with Integrated Water Resistance and Compressive Strength (2021) (1)
- Nerve‐Fiber‐Inspired Construction of 3D Graphene “Tracks” Supported by Wood Fibers for Multifunctional Biocomposite with Metal‐Level Thermal Conductivity (2023) (1)
- Design of tough, strong and recyclable plant protein-based adhesive via dynamic covalent crosslinking chemistry (2023) (1)
- Pre-treatment of natural bamboo for use as a high-performance bio-composites via acetic acid ball milling technology (2023) (1)
- Effect of tannin on the bonding performance and mildew resistance of soybean meal-based adhesive (2022) (1)
- A nacre-inspired strong and flame retardant laminated veneer lumber bonded with magnesium oxychloride cement (2021) (1)
- Advances in desalination technology and its environmental and economic assessment (2023) (1)
- A high-performance, sustainable nacre-mimetic film with montmorillonite nanosheets crosslinked natural wood powders (2023) (1)
- Advanced Biomimetic Soybean Meal-Based Adhesive with High Strength and Toughness (2022) (1)
- A strong, antimildew, and fully bio-based adhesive fabricated by soybean meal and dialdehyde chitosan (2023) (0)
- Ultra-Thin Wood-Based Acoustic Diaphragms Fabricated via an Environmentally Friendly Strategy. (2022) (0)
- Preparation of functional fiber hybrid enhanced high strength and multifunctional protein based adhesive (2022) (0)
- A novel sol-gel strategy for constructing wood fibers and aramid nanofiber nanocomposite with strong, tough and recyclable properties (2023) (0)
- Flammability and physical–mechanical properties assessment of wood treated with furfuryl alcohol and nano-SiO2 (2015) (0)
- Flexible, durable, and anti-fouling nanocellulose-based membrane functionalized by block copolymer with ultra-high flux and efficiency for oil-in-water emulsions separation (2022) (0)
- A Strong and Multifunctional Soy Protein-Based Adhesive with Excellent Coating and Prepressing Performance by Constructing a "Bond-Stitch" Molecular Topological Structure (2021) (0)
- Gln-Lys isopeptide bond and boroxine synergy to develop strong, anti-mildew and low-cost soy protein adhesives (2023) (0)
- Constructing Core–Shell Nanohybrid SiO 2 to Develop a Strong Soy Protein Adhesive with Excellent Flame-Retardant and Coating Ability (2021) (0)
- Tough, waterproof, and mildew-resistant fully biobased soybean protein adhesives enhanced by furfuryl alcohol with dynamic covalent linkages (2023) (0)
- Smart Sponge For Organic Phase Continuous Transportation and Recovery Through Thermal Responsive Self-Releasing (2021) (0)
- A spider-silk-inspired soybean protein adhesive with high-strength and mildew-resistant via synergistic effect of MXene nanosheets and chitosan (2023) (0)
- Preparation of a strong, high prepressing intensity, and multifunction soybean protein adhesive by using hyperbranched functional polymer (2023) (0)
- Scalable Manufacturing of Environmentally Stable All-Solid-State Plant Protein-Based Supercapacitors with Optimal Balance of Capacitive Performance and Mechanically Robust. (2023) (0)
- Oxidation and corrosion behavior of 2D laminated SiC/SiC with Si/mullite/BSAS EBC in dry oxygen/water vapor at 1200 °C (2023) (0)
- Natural organic-inorganic hybrid structure enabled green biomass adhesive with desirable strength, toughness and mildew resistance. (2023) (0)
- Research progress of functional composite materials constructed from high porosity three-dimensional structural wood (2020) (0)
- Design, Development, and Outlook of Superwettability Membranes in Oil/Water Emulsions Separation (Adv. Mater. Interfaces 18/2021) (2021) (0)
- Low Temperature Curable and Strong Soy Protein/Allicin Adhesive with Excellent Mildew Proof Via Free Radical Polymerization Curing System Design (2021) (0)
- Transparent, UV blocking, and strong wood-based biocomposites with isotropic optical and mechanical properties (2023) (0)
- Combined treatment for conversion of fast-growing poplar wood to magnetic wood with high dimensional stability (2015) (0)
- A facile and small-molecule regulated borate network gelation to improve the mildew proof, fire-retardant of bamboo (2023) (0)
- Environmentally friendly protein based adhesive enhanced by water-soluble glycerin epoxy resin (0)
- of halloysite nanotubes ( HNTs ) via mussel-inspired surface modi fi cation and silane grafting for HNTs / soy protein isolate nanocomposite fi lm preparation (2017) (0)
- Study of a Novel Thermosetting Wood Surface Treatment Agent (2013) (0)
- Low carbon footprint preparation of MXene incorporated lignocellulosic fibers for high thermal conductivity applications. (2022) (0)
- Constructing phenylboronic acid-tethered hierarchical kenaf fibers to develop strong soy meal adhesives with excellent water resistant, mildew proof, and flame-retardant properties (2023) (0)
- MALDI-TOF MS analysis of the acceleration of the curing of phenol–formaldehyde (PF) resins induced by propylene carbonate (2014) (0)
- Si-HfO2 composite powders fabricated by freeze drying for bond layer of environmental barrier coatings (2022) (0)
- Towards low polymer content transparent composites via novel integration engineering (2023) (0)
- Preparation of a Strong Soy Protein Adhesive with Mildew Proof, Flame Retardant, Electromagnetic Shielding Performance Via Constructing Nanophase Reinforcement Organic–Inorganic Hybrid Structure (2022) (0)
- Optimization of reaction parameters and characterization of glyoxal-treated poplar sapwood (2014) (0)
- Low-temperature curable and strong soy protein/allicin adhesive with excellent mildew resistance via a free-radical-polymerization curing system (2022) (0)
- Resin-impregnated wooden anti-glare board and its outstanding exterior performance (2021) (0)
- Hydrophobic-action-driven removal of six organophosphorus pesticides from tea infusion by modified carbonized bacterial cellulose. (2023) (0)
- An editable shape-memory transparent wood for smart building materials (2020) (0)
- Biomimetic cellulose-nanocrystalline-based composite membrane with high flux for efficient purification of oil-in-water emulsions. (2023) (0)
- Photosensitive Al2O3 slurry with high solid content and low viscosity (2023) (0)
- A Novel Universality Strategy for Fabricating Soybean Protein Adhesive with Excellent Adhesion Performance and Anti-Mildew (2022) (0)
- Functionalized cellulose nanofibrils based supramolecular system-assisted molding enabled strong, antibacterial chitosan bioplastics (2023) (0)
- Effects of resin open time and melamine addition on cold pre-pressing performance of a urea–formaldehyde resin (2018) (0)
- The synergy between natural polyphenol-inspired catechol moieties and plant protein-derived bio-adhesive enhances the wet bonding strength (2017) (0)
- Laminated Transparent Woods with Adjustable Optical and Enhanced Mechanical Properties (2022) (0)
- Development of a strong and multifunctional soy protein-based adhesive with excellent coating and prepressing in wet state by constructing a radical polymerization and organic-inorganic mineralization bionic structure (2023) (0)
- A strong and biodegradable wood particles-based bioplastic modified by synergistically dynamic cross-linking with tannic acid and Fe3+ (2022) (0)
- Improving Bond Performance and Reducing Cross-Linker Dosage of Soy Protein Adhesive via Hyper-Branched and Organic–Inorganic Hybrid Structures (2023) (0)
- Processing poplar fiber as a full renewable formaldehyde-free bio-composite (0)
- The Effects of Crossover Pores on High Temperature Bending Behavior of 3-Dimensional Braided C/SiC (2006) (0)
- Improvement of water resistance, dimensional stability, and mechanical properties of poplar wood by rosin impregnation (2015) (0)
- High-Performance Microcrystalline Cellulose/Soy Protein Isolate-Based Nanocomposite Film via Cu and Zn Nanoclusters Modification (2017) (0)
- Tough and strong soy protein film by integrating CNFs and MXene with photothermal conversion and UV-blocking performance (2022) (0)
- Synthesis of γ‐Bi 2 O 3 /YSZ composite powders using a facile precipitation method (2022) (0)
- Using environmentally friendly technology for fabricating special plywood with ultra-high strength (2023) (0)
- Green and efficient production of functionalized graphene to achieve soybean meal-based adhesive enhancement (2022) (0)
- Durable Ultra-High Hydrophobic Oil Absorbing Materials Based on Biomass Prepared Via a Simple Low-Cost Strategy (2023) (0)
This paper list is powered by the following services:
