John Jonas
#33,658
Most Influential Person Now
Canadian metallurgist
John Jonas's AcademicInfluence.com Rankings
John Jonasengineering Degrees
Engineering
#1400
World Rank
#2071
Historical Rank
Metallurgy
#7
World Rank
#8
Historical Rank
Materials Science
#53
World Rank
#54
Historical Rank
Download Badge
Engineering
John Jonas's Degrees
- Masters Materials Science McGill University
- PhD Metallurgical Engineering University of British Columbia
Why Is John Jonas Influential?
(Suggest an Edit or Addition)According to Wikipedia, John J. Jonas was born in Montreal and graduated from McGill University with a bachelor's degree in Metallurgical Engineering in 1954. He later attended Cambridge University on an Athlone Fellowship and received a Ph.D. degree in Mechanical Sciences in 1960. On returning to Montreal, he began teaching "mechanical metallurgy" at McGill and built up a research laboratory that includes a number of specialized testing machines and is particularly well equipped for experimental investigations in the field of high temperature deformation.
John Jonas's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Current issues in recrystallization: a review (1997) (1888)
- Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions (2014) (1672)
- Strength of metals and alloys (1985) (969)
- Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations (1984) (895)
- A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization (1996) (769)
- Strength and structure under hot-working conditions (1969) (536)
- The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals (1984) (488)
- The Avrami kinetics of dynamic recrystallization (2009) (465)
- Cold rolling and annealing textures in low carbon and extra low carbon steels (1994) (461)
- Twinning and texture development in two Mg alloys subjected to loading along three different strain paths (2007) (423)
- Determination of the plastic behaviour of solid polymers at constant true strain rate (1979) (399)
- Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation (2003) (376)
- Transformation Textures in Steels (1994) (353)
- Axial stresses and texture development during the torsion testing of Al, Cu and α-Fe (1984) (322)
- Recovery and Recrystallization during High Temperature Deformation (1975) (316)
- Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy (2007) (286)
- The role of strain accommodation during the variant selection of primary twins in magnesium (2011) (274)
- Theory of torsion texture development (1984) (268)
- Twinning-induced softening in polycrystalline AM30 Mg alloy at moderate temperatures (2006) (266)
- Formability and workability of metals : plastic instability and flow localization (1984) (245)
- Effect of rate sensitivity on the stability of torsion textures (1988) (237)
- Use of Schmid factors to select extension twin variants in extruded magnesium alloy tubes (2006) (197)
- Modelling the effect of deformation-induced vacancies on segregation and precipitation (1994) (194)
- Relation between axial stresses and texture development during torsion testing: A simplified theory (1985) (190)
- Yield and transient effects during the plastic deformation of solid polymers (1981) (181)
- Plastic stability in tension and compression (1976) (174)
- Variant selection of primary, secondary and tertiary twins in a deformed Mg alloy (2012) (173)
- Predicting the Critical Stress for Initiation of Dynamic Recrystallization (2006) (171)
- Variant selection during secondary twinning in Mg–3%Al (2010) (171)
- Interaction between recrystallization and precipitation during the high temperature deformation of HSLA steels (1979) (167)
- Dynamic precipitation and solute hardening in A V microalloyed steel and two Nb steels containing high levels of Mn (1981) (165)
- Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions (1997) (161)
- Recrystallization of austenite after deformation at high temperatures and strain rates—Analysis and modeling (1991) (155)
- Mathematical modeling of the hot strip rolling of microalloyed Nb, multiply-alloyed Cr-Mo, and plain C-Mn steels (2000) (154)
- Effect of initial grain size on dynamic recrystallization of copper (1983) (141)
- Recent advances in hot working: Fundamental dynamic softening mechanisms (1984) (141)
- Stress response and persistence characteristics of the ideal orientations of shear textures (1989) (141)
- Modern HSLA steels and role of non-recrystallisation temperature (2012) (133)
- Effect of vanadium and molybdenum addition on high temperature recovery, recrystallization and precipitation behavior of niobium-based microalloyed steels (1983) (132)
- Effect of precipitation on recrystallization in microalloyed steels (1979) (129)
- Recovery and recrystallization of polycrystalline nickel after hot working (1979) (128)
- Self-consistent modeling of the flow behavior of wrought alpha/beta titanium alloys under isothermal and nonisothermal hot-working conditions (2002) (120)
- A mechanical interpretation of the activation energy of high temperature deformation in two phase materials (1996) (119)
- Yield surfaces for textured polycrystals—I. Crystallographic approach (1987) (119)
- Influence of Ferrite Rolling Temperature on Microstructure and Texture in Deformed Low C and IF Steels (1997) (117)
- Effect of deformation parameters on the (1993) (116)
- The Dynamic, Static and Metadynamic Recrystallization of a Nb-microalloyed Steel (2001) (115)
- DEFORMATION OF ALUMINIUM AT HIGH TEMPERATURES AND STRAIN RATES (1967) (115)
- Recrystallization of high carbon steel between intervals of high temperature deformation (1973) (112)
- Equivalent strain in large deformation torsion testing : Theoretical and practical considerations (1982) (111)
- Effect of stress triaxiality on neck propagation during the tensile stretching of solid polymers (1983) (108)
- Spreadsheet modelling of grain size evolution during rod rolling (1996) (106)
- Development of ferrite rolling textures in low- and extra low-carbon steels (1990) (105)
- Recrystallization and aging effects associated with the high temperature deformation of waspaloy and inconel 718 (1981) (105)
- Critical strain for dynamic recrystallization in variable strain rate hot deformation (2003) (104)
- A stress relaxation method for following carbonitride precipitation in austenite at hot working temperatures (1988) (102)
- The Hall–Petch Relation and High-Temperature Subgrains (1970) (101)
- Texture development during the torsion testing of α-iron and two IF steels (1996) (100)
- Recovery and recrystallization of carbon steel between intervals of hot working (1975) (99)
- Influence of microstructure on the flow behavior of duplex stainless steels at high temperatures (2000) (98)
- Mathematical Modeling of the Mean Flow Stress, Fractional Softening and Grain Size during the Hot Strip Rolling of C-Mn Steels (1996) (98)
- Determination of Recrystallization Stop Temperature from Rolling Mill Logs and Comparison with Laboratory Simulation Results (1994) (97)
- Prediction of Temperature Distribution, Flow Stress and Microstructure during the Multipass Hot Rolling of Steel Plate and Strip (1991) (96)
- Initiation and accommodation of primary twins in high-purity titanium (2014) (96)
- Transformation of Deformed Austenite at Temperatures above the Ae3 (2012) (95)
- Measurement and prediction of plastic anisotropy in deep-drawing steels (1990) (95)
- The influence of rolling practice on notch toughness and texture development in high-strength linepipe (1999) (92)
- Grain refinement by dynamic recrystallization during the simulated warm-rolling of interstitial free steels (1992) (91)
- Microstructure and mechanical properties of multi-directionally forged Mg–Al–Zn alloy (2012) (90)
- The development of strain-rate gradients (1979) (89)
- Modeling Texture Change during the Recrystallization of an IF Steel (1994) (88)
- An analysis of the isothermal hot compression test (1992) (88)
- Dynamic recrystallization—scientific curiosity or industrial tool? (1994) (88)
- Evolution of microstructure and microtexture during the hot deformation of Mg–3% Al (2010) (88)
- Kinetics and Critical Conditions for the Initiation of Dynamic Recrystallization in 304 Stainless Steel (2004) (87)
- Modeling of the plastic anisotropy of textured sheet (1988) (87)
- SOLUTE STRENGTHENING AT HIGH TEMPERATURES IN ZIRCONIUM-TIN ALLOYS. (1972) (83)
- Effect of Dynamic Recrystallization on Microstructural Evolution during Strip Rolling (1990) (81)
- PLASTIC INSTABILITY AND FLOW LOCALIZATION IN SHEAR AT HIGH RATES OF DEFORMATION (1984) (79)
- Grain boundary segregation of boron during continuous cooling (1989) (78)
- Mathematical Modeling of Mean Flow Stress during the Hot Strip Rolling of Nb Steels (1996) (78)
- Microtextural study of orientation change during nucleation and growth in a cold rolled ULC steel (2003) (77)
- Effect of Temperature and Hydrogen Concentration on the Lattice Parameter of Beta Titanium (2001) (77)
- The non-equilibrium segregation of boron on original and moving austenite grain boundaries (2002) (77)
- Variant selection during secondary and tertiary twinning in pure titanium (2014) (76)
- Evolution of recrystallization texture in a 0.78 wt.% Cr extra-low-carbon steel after warm and cold rolling (2011) (76)
- The yield surface of textured polycrystals (1985) (75)
- Nucleation kinetics of Ti carbonitride in microalloyed austenite (1989) (75)
- Distinctive Aspects of the Physical Metallurgy of Warm Rolling (1999) (74)
- Influence of Ferrite Rolling Temperature on Grain Size and Texture in Annealed Low C and IF Steels (1997) (74)
- Dynamic precipitation and solute hardening in a titanium microalloyed steel containing three levels of manganese (1984) (74)
- Flow softening, twinning and dynamic recrystallization in AZ31 magnesium (2013) (74)
- TEXTURE DEVELOPMENT AND LENGTH CHANGES IN COPPER BARS SUBJECTED TO FREE END TORSION (1992) (72)
- Preferential nucleation of dynamic recrystallization at triple junctions (2004) (72)
- Modeling texture change during the static recrystallization of interstitial free steels (1996) (72)
- Dynamic recrystallization during the transient deformation of a vanadium microalloyed steel (1983) (72)
- Recent advances in the thermohydrogen processing of titanium alloys (1996) (70)
- The back stress in high temperature deformation (1969) (70)
- Effect of Initial Grain Size on the Static Recrystallization Kinetics of Nb Microalloyed Steels (1996) (70)
- Modeling of dynamic material behavior: A critical evaluation of the dissipator power co-content approach (1996) (69)
- Softening and Flow Stress Behaviour of Nb Microalloyed Steels during Hot Rolling Simulation (1995) (69)
- Role of the dynamic and static softening mechanisms in multistage hot working (1985) (69)
- Dynamic Strain Aging and the Wire Drawing of Low Carbon Steel Rods (1995) (69)
- Effect of crack and cavity generation on tensile stability (1977) (69)
- Linear friction welding of a near-β titanium alloy (2012) (68)
- Orientation selective recrystallization of nonoriented electrical steels (1996) (68)
- Dynamic strain aging and hydrogen-induced softening in alpha titanium (1996) (68)
- Effect of dynamic strain aging on the appearance of the rare earth texture component in magnesium alloys (2011) (65)
- Mathematical Modeling of the Recrystallization Kineticsof Nb Microalloyed Steels (2001) (64)
- Kinetics of recovery and recrystallization in polycrystalline copper (1980) (64)
- The grain boundary segregation of boron during isothermal holding (1989) (63)
- Effect of Austenite Pancaking on the Microstructure, Texture, and Bendability of an Ultrahigh-Strength Strip Steel (2014) (63)
- Yield vectors in f.c.c. crystals (1983) (62)
- Elastic moduli of titanium-hydrogen alloys in the temperature range 20 °C to 1100 °C (1996) (62)
- Large strain shear and torsion of rate-sensitive FCC polycrystals (1990) (61)
- Torsion textures produced by dynamic recrystallization in α-iron and two interstitial-free steels (1998) (61)
- Representation of misorientations in Rodrigues–Frank space: application to the Bain, Kurdjumov–Sachs, Nishiyama–Wassermann and Pitsch orientation relationships in the Gibeon meteorite (2005) (61)
- Effects of shear band formation on texture development in warm-rolled IF steels (2001) (61)
- The non-equilibrium segregation of boron during the recrystalization of Nb-treated HSLA steels (1991) (61)
- Modelling of dynamic recrystallisation kinetics in austenitic stainless and hypereutectoid steels (2006) (59)
- Dynamic precipitation and coarsening of niobium carbonitrides during the hot compression of HSLA steels (1980) (58)
- Nucleation of dynamic recrystallization and variant selection in copper bicrystals (2007) (58)
- Ti(CN) precipitation in microalloyed austenite during stress relaxation (1988) (56)
- Grain-boundary sliding and intergranular cavitation during superplastic deformation of α/β brass (1978) (56)
- Effect of alloying elements on metadynamic recrystallization in HSLA steels (1995) (55)
- Yield surfaces for textured polycrystals—II. Analytical approach (1987) (55)
- Modelling oriented nucleation and selective growth during dynamic recrystallization (1992) (55)
- Transformation of Deformed Austenite at Temperatures above the Ae3 (2012) (55)
- Effect of phase composition and hydrogen level on the deformation behavior of titanium-hydrogen alloys (1996) (54)
- Flow stress and substructural change during the transient deformation of Armco iron and silicon steel (1971) (53)
- Solute drag effects during the dynamic recrystallization of nickel (1999) (53)
- The Influence of Non-Octahedral Slip on Texture Development in FCC Metals (1988) (53)
- Calculation of the Ti(CyN1−y)−Ti4C2S2−MnS-austenite equilibrium in Ti-bearing steels (1989) (51)
- Strain-induced nucleation of MnS in electrical steels (1992) (51)
- Mathematical Modelling of Mean Flow Stress during the Hot Strip Rolling of Multiply-alloyed Medium Carbon Steels (1998) (51)
- Dislocation glide controlled by linear elastic obstacles: A thermodynamic analysis (1973) (50)
- A variant selection model for predicting the transformation texture of deformed austenite (1997) (50)
- Formation of Widmanstätten ferrite at very high temperatures in the austenite phase field (2016) (49)
- Effect of Mn and Si on the dynamic transformation of austenite above the Ae3 temperature (2015) (49)
- Observations of the Gibeon meteorite and the inverse Greninger-Troiano orientation relationship (2006) (49)
- Characteristics of magnesium AZ31 alloys subjected to high speed rolling (2015) (49)
- Texture evolution during the recrystallization of a warm-rolled low-carbon steel (2006) (48)
- Transformation softening in three titanium alloys (2017) (47)
- Importance of deformation induced ferrite and factors which control its formation (1997) (47)
- A dislocation-based model for variant selection during the γ-to-α′ transformation (2001) (46)
- Modeling of Flow Stress and Rolling Load of a Hot Strip Mill by Torsion Testing (1989) (46)
- Transformation Textures Associated with Steel Processing (2009) (46)
- Stacking fault energy and its influence on high-temperature plastic flow in Zr--Sn alloys (1974) (46)
- The Critical Strain for Dynamic Recrystallization in Rolling Mills (2003) (45)
- Static recrystallization behavior of magnesium AZ31 alloy subjected to high speed rolling (2016) (45)
- Length changes during free end torsion: A rate sensitive analysis (1990) (45)
- Crystallographic relations between face- and body-centred cubic crystals formed under near-equilibrium conditions: Observations from the Gibeon meteorite (2006) (45)
- The austenite-to-martensite transformation in Fe–30%Ni after deformation by simple shear (2000) (45)
- A comparison of the von Mises and Hencky equivalent strains for use in simple shear experiments (2012) (44)
- Predictions of forming limit diagrams using crystal plasticity models (1998) (44)
- Prediction of transformation textures in steels (1990) (44)
- Substructure strengthening in zirconium and zirconium-tin alloys (1972) (44)
- Role of mechanical activation in the dynamic transformation of austenite (2013) (42)
- Effect of austenite pancaking on texture formation in a plain carbon and A Nb microalloyed steel (1994) (42)
- Nucleation of dynamic recrystallization at triple junctions in polycrystalline copper (2005) (42)
- The Use of Torsion Testing to Assess Material Formability (1982) (42)
- Effect of deformation and cooling rate on the microstructures of low carbon Nb-B steels (1998) (42)
- Fine-scale microstructural investigations of warm rolled low-carbon steels with and without Cr, P, and B additions (2006) (41)
- INFLUENCE OF HOT STRIP ROLLING PARAMETERS ON AUSTENITE RECRYSTALLIZATION IN INTERSTITIAL FREE STEELS (1992) (41)
- The Critical Strain for Dynamic Transformation in Hot Deformed Austenite (2013) (41)
- Comparison of Dynamic Recrystallization and Conventional Controlled Rolling Schedules by Laboratory Simulation (1991) (40)
- Effect of deformation on the austenite-to-ferrite transformation in a plain carbon and two microalloyed steels (1988) (39)
- Flow behaviour of medium carbon microalloyed steel under hot working conditions (1996) (39)
- Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension (2014) (39)
- Laboratory simulation of seamless tube piercing and rolling using dynamic recrystallization schedules (1990) (39)
- A new approach to modeling the flow curve of hot deformed austenite (2011) (38)
- Determination of the Critical Strains for the Initiation of Dynamic Transformation and Dynamic Recrystallization in Four Steels of Increasing Carbon Contents (2013) (38)
- The Deformation Behavior of Types 304, 316, and 317 Austenitic Stainless Steels During Hot Torsion (1983) (38)
- Modelling the texture changes produced by dynamic recrystallization (1992) (38)
- Effect of rolling temperature on the deformation and recrystallization textures of warm-rolled steels (2003) (37)
- Continuous-cooling-precipitation kinetics of Nb(CN) in high-strength low-alloy steels (1992) (36)
- Influence of strain rate on production of deformation induced ferrite and hot ductility of steels (1994) (36)
- The hot strip mill as an experimental tool (2000) (36)
- Effect of texture on earing in FCC metals: Finite element simulations (1998) (35)
- Recrystallization kinetics of microalloyed steels deformed in the intercritical region (1992) (35)
- Effect of twinning on recrystallisation textures in deformed magnesium alloy AZ31 (2011) (35)
- Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain (2020) (34)
- High temperature deformation and extended plasticity in Mg single crystals (2005) (34)
- Effect of manganese on recrystallisation kinetics of niobium microalloyed steel (2002) (34)
- Flow Softening-based Formation of Widmanstätten Ferrite in a 0.06%C Steel Deformed Above the Ae 3 (2015) (34)
- Dynamic bake hardening of interstitial-free steels (2000) (34)
- Effect of Ca Addition on the Intensity of the Rare Earth Texture Component in Extruded Magnesium Alloys (2014) (34)
- Textures induced by tension and deep drawing in aluminum sheets (1996) (34)
- Deformation of twins in a magnesium alloy under tension at room temperature (2014) (34)
- Influence of Dynamic Recrystallisation on the Tensile Ductility of Steels in the Temperature Range 700 to 1150°C (1992) (33)
- Effect of Silicon on the Kinetics of Nb(C, N) Precipitation during the Hot Working of Nb-bearing Steels (2000) (33)
- Dynamic transformation of Ti–6Al–4V during torsion in the two-phase region (2018) (33)
- Effect of interpass time on austenite grain refinement by means of dynamic recrystallization of austenite (1991) (32)
- Temperature dependence of the rate sensitivity and its effect on the activation energy for high-temperature flow (1996) (32)
- Warm rolling behaviour of low carbon steels (2003) (32)
- The Transition Between Thermally Activated and Athermal Flow in Polycrystalline Alpha-Zirconium (1974) (32)
- Hot Workability Testing Techniques (1971) (32)
- The Ferrite Transformation in Hot Deformed 0.036% Nb Austenite at Temperatures Above the Ae3 (2010) (32)
- Precipitation kinetics and solute strengthening in high temperature austenites containing Al and N (1981) (32)
- The strain dependence of postdynamic recrystallization in 304 H stainless steel (2006) (32)
- EFFECT OF CONTROLLED ROLLING ON TEXTURE DEVELOPMENT IN A PLAIN CARBON AND A NB MICROALLOYED STEEL (1992) (32)
- Theoretical analyses of 〈111〉 pencil glide in b.c.c. crystals (1988) (31)
- Constant true strain rate apparatus for use with Instron testing machines (1974) (31)
- The Deformation Microstructure and Recrystallization Behavior of Warm Rolled Steels (2002) (31)
- Dynamic transformation during the high temperature deformation of two-phase titanium alloys (2019) (31)
- Effect of cooling rate after hot rolling and of multistage strain aging on the drawability of low-carbon-steel wire rod (1995) (30)
- Effect of test method on transition from multiple to single peak dynamic recrystallization (1984) (30)
- Effect of ageing on microstructure and mechanical properties of a multi-directionally forged Mg–6Al–1Zn alloy (2013) (30)
- A DISLOCATION REACTION MODEL FOR VARIANT SELECTION DURING THE AUSTENITE-TO-MARTENSITE TRANSFORMATION (1999) (30)
- The equivalent strain in high pressure torsion (2014) (30)
- Superplastic behaviour of two-phase Cu-P alloys (1976) (30)
- Correcting for the Effects of Static and Metadynamic Recrystallization during the Laboratory Simulation of Rod Rolling (1994) (30)
- Deformation behavior of two Mg alloys during ring hoop tension testing (2008) (29)
- Variant selection of {10-12}-{10-12} double twins during the tensile deformation of an AZ31 Mg alloy (2017) (29)
- A dynamic model for aseismic ductile shear zones (1979) (29)
- Measurement and modelling of the effects of precipitation on recrystallization under multipass deformation conditions (1993) (29)
- A model for high temperature deformation based on dislocation dynamics, rate theory and a periodic internal stress (1970) (28)
- Plastic Deformation: Role of Recovery and Recrystallization (2014) (28)
- Effect of Interpass Time on the Dynamic Transformation of a Plain C–Mn and a Nb Microalloyed Steel (2015) (27)
- Effect of twinning on the flow behavior during strain path reversals in two Mg (+Al, Zn, Mn) alloys (2008) (27)
- Mechanisms of grain refinement in Mg–6Al–1Zn alloy during hot deformation (2012) (27)
- An analytic method for the prediction of ODFS with application to the shear of FCC polycrystals (1990) (27)
- Flow Softening at Elevated Temperatures (1978) (27)
- Modelling Texture Change during the Static Recrystallization of a Cold Rolled and Annealed Ultra Low Carbon Steel Previously Warm Rolled in the Ferrite Region (1997) (27)
- Development of anisotropy during the cold rolling of aluminium sheet (1991) (27)
- A Reexamination of the Gibbs Energies of Formation of TiS and Ti4C2S2 in Austenite (1990) (26)
- The deformation of armco iron and silicon steel in the vicinitl of the curie temperature (1974) (26)
- FEM simulation of the forming of textured aluminum sheets (1998) (26)
- Formation of Widmanstätten Ferrite in a 0.036% Nb Low Carbon Steel at Temperatures Above the Ae3 (2014) (26)
- Thermodynamics of dynamic transformation of hot deformed austenite in four steels of increasing carbon contents (2014) (26)
- An analysis of flow localization during torsion testing (1985) (26)
- Opposing and Driving Forces Associated with the Dynamic Transformation of Ti-6Al-4V (2018) (26)
- Simulation of Austenite Flow Curves under Industrial Rolling Conditions Using a Physical Dynamic Recrystallization Model (2012) (26)
- The formation of deformation induced ferrite during mechanical testing (1998) (26)
- Grain reorientation during the plastic deformation of f.c.c. metals (1986) (26)
- Linear friction welding of Al–Cu Part 2 – Interfacial characteristics (2011) (25)
- Static and Dynamic Strain Aging at High Temperatures in 304 Stainless Steel (2004) (25)
- Textures induced by tension and deep drawing in low carbon and extra low carbon steel sheets (1993) (25)
- Transformation and Recrystallization Textures Associated with Steel Processing (2005) (25)
- The onset of flow localization in tensile samples containing geometric and metallurgical defects (1978) (25)
- A simplified numerical analysis of the sheet tensile test (1985) (25)
- Crystallographic features of theγ-to-α transformation in a Nb-added transformation-induced plasticity steel (2006) (25)
- Variant selection of primary extension twins in AZ31 magnesium deformed at 400 °C (2016) (25)
- Effect of particle/matrix interfacial character on the high-temperature deformation and recrystallization behavior of Cu with dispersed Fe particles (2008) (25)
- Effect of deformation heating and strain rate sensitivity on flow localization during the torsion testing of 6061 aluminum (1986) (24)
- Yield surfaces of b.c.c. crystals for slip on the {110} 〈111〉 and {112} 〈111〉 systems (1988) (24)
- Grain-scale characterization of transformation textures (2004) (24)
- Effect of Chromium and Boron Additions on the Warm Rolling Behavior Of Low Carbon Steels (2002) (24)
- Static Recrystallization of Nb and Nb-B Steels under Continuous Cooling Conditions (1996) (24)
- Simulation of the deformation textures induced by deep drawing in extra low carbon steel sheets (1994) (23)
- Design of dynamic recrystallisation controlled rolling schedules for seamless tube rolling (1992) (23)
- The possible role of partial dislocations in facilitating transformations of the Nishiyama-Wassermann type (2005) (23)
- Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium (2017) (23)
- Analytic Prediction of Texture and Length Changes During Free-End Torsion (1989) (22)
- Effect of Silicon on the Interaction between Recrystallization and Precipitationin Niobium Microalloyed Steels (2004) (22)
- Influence of strain rate on interpass softening (1993) (21)
- The onset of plastic instability in tensile samples containing deformation defects (1978) (21)
- Flow stress and substructural change during transient dynamic recrystallization of nickel (1986) (21)
- The extrusion force and the mean strain rate during the extrusion of strain rate sensitive materials (1970) (21)
- Comparison between simulated and experimental transformation textures in a Nb microalloyed steel (1994) (21)
- DEFORMATION OF ICE UNDER HIGH INTERNAL SHEAR STRESSES (1969) (21)
- Characterisation of critical nucleus/matrix interface: application to Cu−Co alloys and microalloyed austenite (1989) (21)
- Effect of Alloying Elements on the Microstructure and Texture of Warm Rolled Steels (2004) (20)
- Influence of damage and texture evolution on limit strain in biaxially stretched aluminum alloy sheets (1998) (20)
- Prediction of Interpass Softening from the Strain Hardening Rate Prior to Unloading (2004) (20)
- Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels (1992) (20)
- Evolution of r-Value During the Tensile Deformation of Aluminium (1995) (20)
- Deep drawing textures in low carbon steels (1999) (20)
- Dynamic transformation of α → β titanium at temperatures below the β-transus in commercially pure titanium (2018) (20)
- Dynamic Transformation of a Low Carbon Steel at Temperatures above the Ae3 (2011) (20)
- Self-consistent polycrystal modelling of dynamic recrystallization during the shear deformation of a Ti IF steel (1999) (20)
- Effect of Finishing Temperature on Hot Band Textures in an IF Steel (1996) (20)
- Effect of Dynamic Transformation on the Mean Flow Stress (2013) (20)
- Orientation Selection During Static Recrystallization of Cross Rolled Non-Oriented Electrical Steels (1996) (20)
- Dynamic Transformation of an X70 Steel under Plate Rolling Conditions (2017) (20)
- Work hardening and rate sensitivity material coefficients for OFHC Cu and 99.99% A1 (1984) (20)
- Shear punch testing of welded pipeline steel (2006) (19)
- Recovery and recrystallization of copper during stress relaxation after hot compression (1987) (19)
- Comparative Study of the Deformation Behaviour of Zr-2.5 wt% Nb and Excel Pressure Tube Alloys (1985) (19)
- Static and dynamic strain aging in 304 austenitic stainless steel at elevated temperatures (2000) (19)
- Flow localization and the determination of constitutive relations in highly drawn polymers: one-dimensional Eulerian formulation of the effect of stress triaxiality (1985) (19)
- Advances in hot deformation textures and microstructures : proceedings of a symposium sponsored by TMS and ASM International held during Materials Week in Pittsburgh, PA, October 18-20, 1993 (1994) (18)
- Comparison of the minimum plastic spin and rate sensitive slip theories for loading of symmetrical crystal orientations (1990) (18)
- On the Pre‐Exponential Factor in the Rate Equation for Plastic Flow (1973) (18)
- The rotation axes and angles involved in the formation of self-accommodating plates of Widmanstätten ferrite (2014) (18)
- Ferrite Formation above the Ae3 Temperature during the Torsion Simulation of Strip Rolling (2015) (18)
- Influence of dynamic precipitation on grain boundary sliding during high temperature creep (1994) (18)
- Laboratory simulation of seamless-tube rolling (1991) (18)
- Dynamic Transformation Behavior of a Deformed High Carbon Steel at Temperatures Above the Ae3 (2013) (18)
- Effect of the Combined Addition of Niobium and Boron on Static Recrystallization in Hot Worked Austenite (1988) (18)
- The combined effect of static recrystallization and twinning on texture in magnesium alloys AM30 and AZ31 (2009) (18)
- Incorporation of an anisotropic (texture-based) strain-rate potential into three-dimensional finite element simulations (1997) (18)
- Effects of varying twist and twist rate sensitivities on the interpretation of torsion testing data (2014) (17)
- AlN Precipitation in Dual-phase 3% Si Electrical Steels (2001) (17)
- Influence of dynamic recovery and dynamic recrystallization on coarsening of Nb(CN) in Nb microalloyed steel (1982) (17)
- Effect of Microstructure on the Cold Headability of a Medium Carbon Steel (2004) (17)
- Representation of orientation relationships in Rodrigues–Frank space for any two classes of lattice (2007) (17)
- An analysis of the nonisothermal tensile test (1985) (17)
- A creep technique for monitoring MnS precipitation in Si steels (1989) (16)
- Influence of deformation defects on the development of strain gradients during the tensile deformation of polyethylene (1992) (16)
- Grain size and high-temperature yield strength of polycrystalline copper (1979) (15)
- Thermally activated flow of H.C.P. metals at low temperatures (1976) (15)
- Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V (2018) (15)
- Texture Evolution in Linear Friction Welded Ti-6Al-4V (2010) (15)
- A metastable phase diagram for the dynamic transformation of austenite at temperatures above the Ae3 (2016) (15)
- Recovery and recrystallization of polycrystalline copper after hot working (1979) (15)
- Effect of texture and heat treatment on high temperature deformation of Zircaloy-2 (1984) (14)
- Continuous cooling transformation temperatures determined by compression tests in low carbon bainitic grades (1998) (14)
- Effect of Pre- and Post-weld Heat Treatments on Linear Friction Welded Ti-5553 (2014) (14)
- Effect of internal stresses in cold rolled IF steel on the orientations of recrystallized grains. (2000) (14)
- Effect of dynamic strain aging on the deformation and twinning behavior of a Mg–2Zn–2Nd alloy (2015) (14)
- Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region (2020) (14)
- Structural and mechanical aspects of high temperature deformation of polycrystalline nickel (1992) (14)
- Reverse Transformation Behavior of Ti-6Al-4V After Deformation in the Two-Phase Region (2017) (14)
- Modelling the length changes that take place during torsion testing (1993) (14)
- Using Oim to Interpret the Dynamically Recrystallized Texture of a Low Stacking Fault Energy FCC Material (1998) (13)
- Problems with Using the Hencky Equivalent Strain in Simple Shear (2011) (13)
- In-situ X-ray diffraction evidence of dynamic transformation of austenite to ferrite during hot compression test in the single austenite phase field (2020) (13)
- Evolution of microstructure, microtexture and mechanical properties of linear friction welded IMI 834 (2012) (13)
- Finite element analysis of damage evolution and the prediction of the limiting draw ratio in textured aluminum sheets (2000) (13)
- Impact of Vegetable Proteins on Dairy Products (1975) (13)
- The activation entropy of high temperature flow (1971) (13)
- Effect of primary recrystallization microstructure on abnormal growth of Goss grains in a twin-roll cast grain-oriented electrical steel (2017) (13)
- Effect of intermediate cooling on grain refinement and precipitation during rolling of seamless tubes (1991) (13)
- Simulated Rod Rolling of Interstitial Free Steels. (1993) (13)
- Flow stress and recrystallisation during hot deformation of Cu–9%Sn alloys (1999) (12)
- Formation of Strain-induced Ferrite in Low Carbon Steels at Temperatures Above the Ae3 (2013) (12)
- The Hencky equivalent strain and its inapplicability to the interpretation of torsion testing experiments (2012) (12)
- Production of recrystallized nano-grains in a fine-grained Cu–Zn alloy (2010) (12)
- Simulation of the effect of texture on limit strain in biaxially stretched steel sheet (1991) (12)
- Variant selection of dynamically nucleated twins at triple junctions in a copper tricrystal (2006) (12)
- Retransformation Behavior of Dynamically Transformed Ferrite during the Simulated Plate Rolling of a Low C and an X70 Nb Steel (2017) (12)
- Simulation of earing in textured materials (1991) (12)
- Deformation Structures and Recrystallization in Magnesium Alloys (2011) (11)
- Effect of Austenite Recrystallization on Toughness of Pipeline Steels (2013) (11)
- Effect of Quench and Interpass Time on Dynamic and Static Softening during Hot Rolling (2005) (11)
- Determination of the Critical Stress Associated with Dynamic Phase Transformation in Steels by Means of Free Energy Method (2018) (11)
- Multistage Hot Deformation with Decreasing Temperature of Two Plain Carbon and Two HSLA Steels (1980) (11)
- UTILIZATION OF DAIRY INGREDIENTS IN OTHER FOODS1 (1973) (11)
- Dynamic transformation during the high temperature deformation of titanium alloys (2021) (11)
- New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation (2020) (11)
- Estimation of 4th and 6th Order ODF Coefficients From Elastic Properties in Cold Rolled Steel Sheets (1989) (11)
- A combined model of oriented nucleation and selective growth for the recrystallization of interstitial-free steels (1995) (11)
- The relation between theoretical and experimental activation areas in high temperature deformation (1970) (11)
- Linear Friction Welding of a Forged Near-α Titanium Alloy (2012) (11)
- Correlations Between the Rolling Textures in FCC Ni–Co Alloys and the BCC Transformation Textures in Controlled Rolled Steels (1990) (11)
- Some Physical Characteristics of Strain Hardening in Severe Plastic Deformation (2015) (10)
- Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products (1993) (10)
- Discussion of dynamic recovery during hot working (1967) (10)
- Steady-state flow controlled by the velocity of grain-boundary migration (1998) (10)
- Comparison of mechanical and metallurgical properties of hollow and solid forged products (2006) (10)
- Effect of quench aging on drawability in low carbon steels (1995) (10)
- Particle-Stimulated Nucleation of Dynamic Recrystallization in AZ31 Alloy at Elevated Temperatures (2005) (10)
- Effect of the Chemical Composition on the Peak and Steady Stresses of Plain Carbon and Microalloyed Steels Deformed under Hot Working Conditions (1998) (9)
- Formation of Widmanstätten Austenite in Strip Cast Grain-Oriented Silicon Steel (2017) (9)
- Effect of Grain Size and Residual Strain on the Dynamic Transformation of Austenite under Plate Rolling Conditions (2018) (9)
- Simulation of the hot rolling and accelerated cooling of a C-Mn ferrite-bainite strip steel (1995) (9)
- Microstructural Evolution of a C-Mn Steel During Hot Compression Above the Ae3 (2016) (9)
- Formation of Deformation-Induced Divorced Eutectoid Pearlite above the Ae1 (2011) (9)
- TEM Characterization of the Recrystallization Behaviour of Warm Rolled Low Carbon Steels Containing Chromium during the Early Stages of Annealing (2005) (9)
- Consistent tangent operator for plasticity models based on the plastic strain rate potential (1995) (9)
- Correlation between the Deformation and Post-deformation Softening Behaviours in Hot Worked Austenite (2008) (9)
- Dynamic Transformation during the Simulated Plate Rolling of a 0.09% Nb Steel (2017) (9)
- Retardation of Austenite Recrystallization by the Strain Induced Segregation of Boron (1989) (8)
- Dynamic Recrystallization Behavior of a Coarse-Grained Mg-2Zn-2Nd Magnesium Alloy (2017) (8)
- The γ-to-α transformation of hot rolled austenite (2000) (8)
- Effect of Dynamic Recrystallization on Grain Refinement of IF Steels (1993) (8)
- Strain Accumulation and Post-Dynamic Recrystallization in C-Mn Steels (1993) (8)
- The activation entropy of low temperature plastic flow (1972) (8)
- Dynamic Transformation during the Simulation of Plate Rolling in an X70 Steel (2017) (8)
- The three critical temperatures of steel rolling and their experimental determination (1990) (8)
- Microstructure and Texture Development in Pipeline Steels (2015) (8)
- Crystallographic Relationships between FCC and BCC Crystals: A Study Using EBSD Techniques (2005) (8)
- Dynamic Transformation during the Torsion Simulation of Strip Rolling (2014) (8)
- Dairy Products as Food Protein Resources (1976) (8)
- Modeling of hot and warm working of steels (2009) (8)
- Modelling the Effects of Nucleation and Growth on Texture Formation in Commercial Steels (1996) (8)
- Effect of Rolling Temperature on the Recrystallization Texture of Warm Rolled Steels (2003) (7)
- A semitopological mean-field model of discontinuous dynamic recrystallization (2018) (7)
- Effect of Chromium, Boron and Manganese Additions on the Deformation and Recrystallization Textures of Warm Rolled Low Carbon Steels (2003) (7)
- The Influence of Static and Dynamic Recrystallization on Mean Flow Stress and Grain Size in Steel (1994) (7)
- Microstructural characterization of warm rolled Cr-containing low carbon steel (2007) (7)
- Minimum-angle versus low-index axis rotations for representing small- and large-angle grain boundary misorientations in cubic lattices (1998) (7)
- Effect of Interpass Time on the Hot Rolling Behaviour of Microalloyed Steels (1998) (7)
- The inverse swift effect: experiments and theory (1998) (7)
- Dynamic Transformation during Simulated Hot Rolling (2013) (7)
- Nb(C, N) precipitation and austenite recrystallization in boron-containing high-strength low-alloy steels (1992) (7)
- Ferrite Formation Above the Ae3 in a Medium-Carbon Steel (2011) (7)
- Growth during and after the Static and Metadynamic Recrystallization of Austenite (1992) (7)
- Effect of Static Recrystallization on the Growth of Nb(CN) in A 0.07% Nb HSLA Steel (1981) (7)
- A Variant Selection Model for the Prediction of Fcc-To-Bcc Transformation Textures (1996) (7)
- Effect of Austenite Recrystallization on Ferrite Transformation Textures (1993) (7)
- Work hardening and kinetics of dynamic recrystallization in hot deformed austenite (2010) (7)
- Effect of stress-relief annealing on the inverse swift effect in steel and iron (1995) (6)
- Effect of deformation on ferrite nucleation and growth in a plain carbon and two microalloyed steels (1989) (6)
- Transformation during the isothermal deformation of low-carbon Nb-B steels (1998) (6)
- Simulated hot working, cold working, (1993) (6)
- Dynamic Transformation of Two-Phase Titanium Alloys in Stable and Unstable States (2019) (6)
- Correlation Between Elastic and Plastic Anisotropy in Rolled Metal Plates (1987) (6)
- Continuous cooling transformation temperatures determined by compression tests in low carbon bainitic grades (1998) (6)
- The dissipation stress in obstacle- and drag-controlled glide (1970) (6)
- Acoustoelastic Determination of the Fourth Order ODF Coefficients and Application to R-Value Prediction (1988) (6)
- Representation of Misorientations in Rodrigues-Frank Space: Application to the Bain, Kurdjumov-Sachs, Nishiyama-Wassermann, Pitsch and Greninger-Troiano Orientation Relationships (2005) (6)
- Shortening behaviour of drawn and twisted copper wires (1991) (6)
- The empirical power law and the activation parameters of high temperature flow (1971) (6)
- Hot compression behaviour of thermo-mechanically processed alpha zirconium (1977) (6)
- Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field (2015) (5)
- Effect of grain refinement and grain coarsening on shapes of dynamic recrystallisation flow curves for C–Mn–Al steels (1991) (5)
- Modeling the Critical Strain for the Initiation of Dynamic Recrystallization during the Hot Strip Rolling of Niobium Microalloyed Steels (1998) (5)
- The mechanical behaviour of cerium-modified alpha-beta brass at high temperatures (1976) (5)
- FEM Simulation of Deep Drawing of Textured Aluminum Sheets Using Anisotropic Fourth-Order Strain-Rate Potential (1998) (5)
- The elastic unloading of torsion bars subjected to prior plastic deformation (1985) (5)
- Dynamic Phase Transformation Behavior of a Nb-microalloyed Steel during Roughing Passes at Temperatures above the Ae3 (2019) (5)
- ESTIMATION OF 8th, 10th AND 12th ORDER ODF COEFFICIENTS FROM ELASTIC PROPERTIES IN COLD ROLLED STEEL SHEETS BY ADJUSTMENT OF SINGLE CRYSTAL ELASTIC CONSTANTS (1990) (5)
- A New Model for Interpass Softening Based on the Strain Hardening Rate Prior to Unloading (2005) (5)
- Effect of Boron Addition on the Dynamic Strain Aging Behavior of a Medium Carbon Steel Wire Rod (1998) (5)
- Superplasticity in Coarse-Grained Al-Mg Alloys (2006) (5)
- Enhanced deformation behavior of incompletely sintered Y-TZP zirconia (1991) (5)
- The Elastic Strain Ratio, the Lüders Strain Ratio and theEvolution of r-Value During Tensile Deformation (1992) (5)
- Modelling the Effects of Static and Dynamic Recrystallization on Texture Development (1994) (5)
- Behaviour of initial texture components during the plane strain drawing of f.c.c. sheet metals (1996) (5)
- Effect of Rolling Temperature, Reduction and Alloying Additions on the Texture of Warm Rolled Steels (2005) (5)
- THE DYNAMIC TRANSFORMATION OF FERRITE ABOVE AE3 AND THE CONSEQUENCES ON HOT ROLLING OF STEELS (2020) (5)
- Effect of Deformation Vacancies on Precipitation-Related Free Energy Changes in Low Alloy Steels (1993) (5)
- Ultrasonic Prediction of r-value in Deep Drawing Steels (1991) (5)
- Flow localization in OFHC Cu and 99.99% Al (1985) (5)
- Effect of solutes on the dynamic recrystallization microstructure of nickel (2001) (4)
- Longitudinal Seam Failure in Extruded AZ31 Alloy (2006) (4)
- Maximum disorientation angles between crystals of any point groups and their corresponding rotation axes (2008) (4)
- Kinetics of Post-dynamic Coarsening and Reverse Transformation in Ti-6Al-4V (2018) (4)
- Nucleation of Dynamic Recrystallization at the Grain Boundaries of Copper Bicrystals (2007) (4)
- Behavior of steels near the incipient melting temperature (1994) (4)
- Influence of Initial Texture on the Development of Deep Drawing Textures in FCC Metals (1994) (4)
- Rodrigues‐Frank Spaces for Misorientations and Orientation Relationships between Crystals of Any Two Crystallographic Point Groups (2008) (4)
- The Strain Dependence of Post-Deformation Softening during the Hot Compression of 304H Stainless Steel (2007) (4)
- Transformation Textures in As‐hot rolled TRIP Steels (2006) (4)
- Time‐Temperature‐Reverse Transformation (TTRT) Behaviors of a C‐Mn and a Nb Microalloyed Steel after Dynamic Transformation above the Ae3 (2017) (4)
- Deformation-induced phase transformation in Zircaloy-4 below the beta transus (2018) (4)
- The calculation of activation parameters for stress and temperature dependent obstacle spacings (1973) (4)
- An EBSD Study of the Misorientations Related to Dynamic Recrystallization in Mg AM30 Deformed At High Temperatures (2008) (4)
- Diffusion-controlled growth and coarsening of MnS during hot deformaion (1992) (4)
- Thermally activated flow of β-titanium and β-titaniumhydrogen alloys (2000) (4)
- Effect of Interpass Time on Austenite Recrystallization in Nb-Containing HSLA Steels (1993) (3)
- Stacking fault probabilities in b.c.c. Zr-Mo alloys (1974) (3)
- ON SUBSTRUCTURE STRENGTHENING AND THE HIGH TEMPERATURE DEFORMATION OF CUBIC METALS (1968) (3)
- Modeling the Flow Curve of Hot Deformed Austenite (2012) (3)
- Strain-Induced Ferrite Formation During Steckel Mill Simulations with Varying Roughing Pass Schedules (2019) (3)
- The role of coincident site lattice boundaries during selective growth in interstitial-free steels (1996) (3)
- Textural Through-Thickness Inhomogeneity and its Influence on thePrediction of Plastic Anisotropy (1991) (3)
- Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling (2020) (3)
- A Study of the γ-to-α Transformation Using EBSD Techniques (2005) (3)
- Effect of Processing Schedule on the Microstructure and Texture of 0.78 wt% Cr Extra-low-carbon Steel (2008) (3)
- Softening and Flow Stress Behaviour during Hot Rolling Simulation of Nb Microalloyed Steels (1995) (3)
- Dynamic Strain Aging Behavior of a Mg-Ce Alloy and its Implications for Extrusion (2012) (3)
- Texture and Anisotropy of Plastic Properties in Deep Drawing Steels (1991) (3)
- Problems Associated with Modeling Interpass Softening during Industrial Hot Strip Rolling (2005) (3)
- Axial Contraction during Torsion Simulation of Steel Rolling at High Temperatures (2003) (3)
- HIGH-TEMPERATURE DEFORMATION BEHAVIOR OF HIGH-NB MICROALLOYED STEEL DURING PLATE ROLLING SIMULATION (2020) (3)
- Serrated Flow and Enhanced Ductility in Coarse-Grained Al-Mg Alloys (2011) (3)
- Dynamic Transformation During the Simulated Hot Rolling of an API‐X80 Steel (2019) (3)
- Physical and computer modeling of the thermomechanical processing of steels (1992) (3)
- Problems associated with use of the logarithmic equivalent strain in high pressure torsion (2014) (3)
- Effect of Manganese on the Dynamic Recrystallization Behavior of Titanium-bearing Microalloyed Steels (1982) (3)
- Role of Cross-Slip in Determining Orientation Relationships during the γ-to-α Transformation (2002) (2)
- Dynamic Transformation of Austenite at Temperatures above the Ae3 (2018) (2)
- Microstructural Changes Following Dynamic Recrystallization in Microalloyed Austenite (1993) (2)
- Ultrasonic prediction ofR-value in deep drawing steels (1993) (2)
- Effect of Chromium Addition on the Warm Rolling Behaviour of Low Carbon Steels (2006) (2)
- A Simplified Method for Describing Plastic Anisotropy (1985) (2)
- A comparison between the recrystallization behaviors of warm and cold rolled ferrite (1996) (2)
- Microstructure and texture evolution during the uniaxial tensile testing of AM30 magnesium alloy (2006) (2)
- Variant Selection during the Transformation of Deformed Austenite in a Niobium Bearing TRIP Steel (2005) (2)
- Plastic flow of MgO: analysis in the case of ΔG-T plots of increasing slope (1974) (2)
- Thermomechanical and thermodynamic behavior of deformed austenite in four different steel grades (2021) (2)
- Microstructure, Texture and Mechanical Properties of AZ31 Mg Alloy Produced by Equal Channel Angular Extrusion (2008) (2)
- Variant Selection during the γ-to-α' Transformation of a Fe-30%Ni Alloy (1998) (2)
- Experimental studies of the force to extrude a rate sensitive material (1971) (2)
- Multiscale Characterisation of the Transformation Texture in a High Performance Steel (2005) (2)
- Dynamic Recrystallization Textures in Ferrite and Ferritic Stainless Steels (1998) (2)
- Microtextural study of variant selection by EBSD in a bainitic steel containing retained austenite (2003) (2)
- SHORTENING BEHAVIOR OF TWISTED COPPER WIRES (1991) (2)
- Dynamic Transformation During the Torsion Simulation of Plate and Strip Rolling (2018) (2)
- Effect of material imperfections on flow localization in torsion (1987) (2)
- Induced ferrite formation above the Ae3 during plate rolling simulation of a X70 steel (2019) (2)
- Effect of Deformation-Induced Vacancies on Recrystallization (1993) (2)
- Erratum: High glucose and hydrogen peroxide increase c-Myc and haeme-oxygenase 1 mRNA levels in rat pancreatic islets without activating NFκB (Diabetologia (2005) 48 (496-505) DOI: org/10.1007/s00125-004-1664-4) (2005) (2)
- Effect of Twinning on the Strain Hardening Behaviors of Two Mg Alloys Deformed Along Four Different Strain Paths (2008) (2)
- Yield surfaces of BCC crystals for slip on the {110} and {112} systems (1988) (2)
- Orientation selection by nucleation and growth in highly strained low carbon steels (2001) (2)
- Calculation of shear deformation at large strains (1988) (2)
- Effect of Work Hardening Flow Law and Sample Geometry on the Forming Limit in Uniaxial Tension (1983) (2)
- The Extrusion of Rate Sensitive Materials (1971) (1)
- Effect of void nucleation and growth on forming limit diagrams of textured aluminum alloy sheets (1998) (1)
- Relationship between Microstructure and Texture Development during the Early Stages of Annealing in Warm Rolled Low Carbon Steels (2005) (1)
- Easy Glide in a Coarse-Grained Mg-2Zn-2Nd Alloy (2016) (1)
- The role of strain heterogeneities in the formation of annealing textures in ultra-low carbon steels (2003) (1)
- The Strain-Independence of Interpass Softening during the Hot Compression of 304 H Stainless Steel (2007) (1)
- Determination of First and Second Order Work-Hardening and Rate-Sensitivity Coefficients for Oxygen-Free, High-Conductivity (OFHC) Copper and 99.99 Percent Aluminum (1982) (1)
- Computer modelling of the plastic properties of textured polycrystals. (1986) (1)
- Transformation Textures in a Controlled Rolled Nb-V Steel (1991) (1)
- Dynamic and post-dynamic recrystallization in a Mo-Ti steel (1992) (1)
- A study of the gamma-to-alpha transformation using EBSD techniques (2005) (1)
- Transformation Behaviours of Intercritically Annealed and as Hot Rolled TRIP steels (2006) (1)
- Texture Evolution during Annealing of Warm Rolled Cr-Containing Low Carbon Steels (2007) (1)
- Influence of Processing Conditions on Obtaining an Ultrafine Grain Structure (2009) (1)
- The Hot Compression of Titanium, Uranium and Zirconium Considered as a Thermally-Activated Process (1969) (1)
- Inapplicability of the Hencky Formalism to the Description of Large Deformations in Shear (2013) (1)
- Prediction of Deformation Textures in Cubic Metals: Application to the Plane Strain Compression of FCC Single Crystals (1986) (1)
- REFERENCE ODF CALCULATIONS FOR THE TORSION OF FCC RATE SENSITIVE POLYCRYSTALS (1991) (1)
- Effect of Stress Relaxation on Recovery and Recrystallization of ETP Copper (1989) (1)
- Role of CSL Boundaries during the Recrystallization of a IF Steel (1996) (1)
- The Avrami Kinetics of Dynamic Recrystallization in Nickel-Niobium Alloys (2018) (1)
- Physical Simulation Methods Applied to Hot Rolling of Linepipe Steels (2018) (1)
- An extended mean field approach for modelling realistic grain size distribution evolutions during Discontinuous Dynamic RX and Post-Dynamic RX (2016) (1)
- Energy Barriers and Driving Forces Associated with the Dynamic Transformation of Ti-6Al-4V (Preprint) (2017) (1)
- Abstracts of articles to be published in acta metallurgicaThe deformation of ARMCO iron and silicon steel in the vicinity of the curie temperature (1974) (1)
- A phenomenological study of the incomplete grain evolution in a deformed vanadium alloy (2017) (1)
- Influence of Slip Activity and Dislocation Reaction on Variant Selection during the γ-to-α Transformation (1998) (1)
- Effect of Deep Drawing on Texture Development in Extra Low Carbon Steel Sheets (1994) (1)
- Elevated temperature property measurements for warm forming magnesium and aluminum alloy tubes (2005) (1)
- Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel (1987) (0)
- Unexpected dynamic transformation from a phase to b phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation (2022) (0)
- Grain Scale Assessment of Variant Selection in a Thermomechanically Processed TRIP Steel (2007) (0)
- TRANSFORMATIONTEXTURES INACONTROLLED ROLLEDNb-VSTEEL (1991) (0)
- Cube texture formation in cold rolled and annealed ultra low carbon steels (1998) (0)
- Mathematical Ing and Grain Modeling ot the Size during the Mean Flow Hot Strip Stress , Rolling Fractional of CM n Soften-Steels (2001) (0)
- Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum (1991) (0)
- Large Strain Effects during Free-End Torsion of Copper Bars (1991) (0)
- Chapter 7. Recovery and recrystallization during high temperature deformation (1976) (0)
- Use of the Cone Expansion Test to Assess the Potential for Longitudinal Seam Failure in Extruded AZ31 and AM30 Mg Alloy Tubes (2009) (0)
- In-Situ X-Ray Diffraction Measurement During Deformation of Austenite Above the Ae3 Temperature (2020) (0)
- Influence of Solute Cerium on the Deformation Behavior of a Mg-0.5 wt.% Ce Alloy (2011) (0)
- Effect of Hot Band Grain Size on the Anisotropy of Warm Rolled Low Carbon Steels (2005) (0)
- Recrystallization textures in BCC steels deformed along different starin paths (1999) (0)
- INVESTIGATIONS ON THE ROLE OF COPPER IN CAUSING AND NICKEL IN PREVENTING THE “HOT SHORTNESS” IN STEELS (2014) (0)
- Microstructure Development in a Magnesium Alloy Tube during Ring Hoop Tension Testing and Warm Gas Forming (2008) (0)
- Recrystallization and Grain Growth Textures in Low Carbon Steels (keynote lecture). (2001) (0)
- Evolution of microstructure in rod and bar rolling (1992) (0)
- ISIJ International, Vol. 46 (2006), No. 11, pp. 1679–1684 (2006) (0)
- Effect of Dynamic Strain Aging on the Strain Rate Sensitivity of a Mg‐2Zn‐2Nd Alloy (2015) (0)
- ACCELERATED COOLING APPLIED TO THE RECRYSTALLIZATION CONTROLLED ROLLING OF SEAMLESS TUBING (1988) (0)
- Orientation Selection During the Nucleation and Growth of Recrystallized Grains in Cold Rolled Low Carbon Steels (invited) (2001) (0)
- MODELLING THE DEFORMATION OF POLYCRYSTALS: EXPLAINING THE LENGTH CHANGES THAT TAKE PLACE DURING TORSION TESTING (1993) (0)
- HIGH TEMPERATURE FLOW STRESS AND SUBSTRUCTURE STRENGTHENING OF POLYCRYSTALLINE $alpha$-ZIRCONIUM. (1970) (0)
- An EBSD Study of Orientation Relationships during Phase Transformations in Ultra High Performance Steels (2007) (0)
- Proceedings of the International Symposium on Direct Rolling and Hot Charging of Strand Cast Billets, Montreal, Canada August 29-30, 1988 (1989) (0)
- Effect of boron on the kinetics of precipitation in deformed austenite (1988) (0)
- Predicting the Occurrence of Dynamic Transformation and Rolling Mill Loads Drops by Hot Torsion and Compression Testing (2013) (0)
- Orientation relationships and variant selection during the γ-to-αb transformation in a hot-rolled trip steel (2005) (0)
- Discussion: “The Free Plastic Compression of Pure Metals” (Shankla, V. S., and Scrutton, R. F., 1970, ASME J. Appl. Mech., 37, pp. 1121–1133) (1971) (0)
- Effect of Number of Roughing Passes on the Dynamic Transformation of Austenite during Simulated Plate Rolling (2018) (0)
- Twinning behavior of AM30 Mg alloy during uniaxial tension and compression (2006) (0)
- Dynamic Transformation during Plate and Strip Rolling (2016) (0)
- Dynamic Twin Nucleation at Triple Junctions in Fe-32%Ni Stainless Steel (2005) (0)
- A Dislocation-Based Model for Variant Selection During the γ — to — α Transformation of Hot Rolled Austenite (2000) (0)
- Dynamic recrystallization in coarse-grained AZ31 alloy at elevated temperatures (2004) (0)
- Warm Working of Ferrite in the Simulated Rod Rolling of IF Steels (1993) (0)
- A new method for describing the anisotropic properties of textured plycrystals. (1987) (0)
- Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition (1990) (0)
- Eff ect of Chromium and Boron Additions on the Warm Rolling Behavior Of LOW Carbon Steels (2002) (0)
- Texture evolution in AM30 Mg alloy deformed along different strain paths (2007) (0)
- APPENDIX - 14 LECTURES ORGANIZED UNDER NPL SEMINAR SERIES (2009) (0)
- The Strain Dependence of Post-Deformation Softening during the Hot Deformation of 304H Stainless Steel (2006) (0)
- Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel (1988) (0)
- 2 Deformation Structures and Recrystallization in Magnesium Alloys (2018) (0)
- Warm Forming of Aluminum Alloy Tubes (2004) (0)
- On Rate Controlling Mechanisms of Flow at High Temperatures / Geschwindigkeitsbestimmende Mechanismen für Fließen bei hohen Temperaturen (1977) (0)
- Discussion: “Shear Front-Lamella Structure in Large Strain Plastic Deformation Processes” (Black, J. T., 1972, ASME J. Eng. Ind., 94, pp. 307–313) (1972) (0)
- The effect of cold rolling reduction on planar anisotropy of interstitial free steels. (1999) (0)
- Mathematical Rolling of Nb Modeling of Mean Steels Flow Stress during the Hot Strip (2001) (0)
- The effect of Nb and b on austenite recrystallization (1990) (0)
- Dynamic Transformation and Retransformation During the Simulated Plate Rolling of an X70 Pipeline Steel (2017) (0)
- Applicability of the Bain, Kurdjumov-Sachs, Nishiyama-Wassermann, Greninger-Troiano and Pitsch relations to transformations in the Gibeon meteorite and in a TRIP steel (2005) (0)
- Axial Stresses and Length Changes During Fixed and Free End Torsion (1989) (0)
- Crystallographic relationships between taenite and kamacite in the Gibeon meteorite (2005) (0)
- Effect of carbide formation on the microstructure and texture of warm rolled and annealed low carbon steels containing Cr and B (2004) (0)
- Description of deformation geometry by effective slips in BCC materials. (1999) (0)
This paper list is powered by the following services:
Other Resources About John Jonas
What Schools Are Affiliated With John Jonas?
John Jonas is affiliated with the following schools:
