Katherine Faber | Academic Influence

Q: What Schools Are Affiliated With Katherine Faber

Katherine Faber is affiliated with the following schools: University of California, Berkeley, Northwestern University , California Institute of Technology, Northwestern University, Pennsylvania State University, University of Washington

Katherine Faber's Degrees

PhD Materials Science and Engineering University of California, Berkeley
Masters Materials Science and Engineering University of California, Berkeley
Bachelors Ceramic Engineering University of Washington

Why Is Katherine Faber Influential?

(Suggest an Edit or Addition)

According to Wikipedia, Katherine T. Faber is an American materials scientist and one of the world's foremost experts in continuum mechanics, ceramic engineering, and material strengthening. Faber is the Simon Ramo Professor of Materials Science at the California Institute of Technology . Currently, Faber is the faculty representative for the Materials Science option at Caltech. She is also an adjunct professor of Materials Science and Engineering at the McCormick School of Engineering and Applied Science at Northwestern University.

(See a Problem?)

Katherine Faber's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Crack deflection processes—I. Theory (1983) (1269)
Crack deflection processes—II. Experiment (1983) (457)
Toughening of Ceramics by Circumferential Microcracking (1981) (176)
Crack‐Growth Resistance of Microcracking Brittle Materials (2006) (154)
Effect of heat treatment on phase stability, microstructure, and thermal conductivity of plasma-sprayed YSZ (2002) (131)
Self-Assembly and Stress Relaxation in Acrylic Triblock Copolymer Gels (2007) (126)
Directionally aligned macroporous SiOC via freeze casting of preceramic polymers (2015) (96)
Intergranular Crack‐Deflection Toughening in Silicon Carbide (1983) (87)
Fracture of ceramics and glasses (1987) (79)
3D analysis of a LiCoO2–Li(Ni1/3Mn1/3Co1/3)O2 Li-ion battery positive electrode using x-ray nano-tomography (2013) (77)
Quantitative Studies of Thermal Shock in Ceramics Based on a Novel Test Technique (1981) (74)
Thermal Conductivity of Porous Silicon Carbide Derived from Wood Precursors (2007) (71)
Precursor selection and its role in the mechanical properties of porous SiC derived from wood (2006) (69)
Thermal Conductivity, Phase Stability, and Oxidation Resistance of Y3Al5O12 (YAG)/Y2O3–ZrO2 (YSZ) Thermal-Barrier Coatings (2004) (68)
Chemical and Mechanical Consequences of Environmental Barrier Coating Exposure to Calcium–Magnesium–Aluminosilicate (2011) (66)
X-ray micro-computed tomography and tortuosity calculations of percolating pore networks (2014) (65)
CERAMIC COMPOSITE INTERFACES: Properties and Design (1997) (63)
The influence of calcium–magnesium–aluminosilicate deposits on internal stresses in Yb 2 Si 2 O 7 multilayer environmental barrier coatings (2016) (63)
The interaction of calcium–magnesium–aluminosilicate with ytterbium silicate environmental barrier materials (2015) (63)
Three-dimensional morphological measurements of LiCoO2 and LiCoO2/Li(Ni1/3Mn1/3Co1/3)O2 lithium-ion battery cathodes (2013) (63)
Challenges in Ceramic Science: A Report from the Workshop on Emerging Research Areas in Ceramic Science (2012) (62)
Interfacial shear stresses in fiber-reinforced glasses (1990) (58)
Characterization of AIN ceramics containing long-period polytypes (1983) (57)
Composites by aluminum infiltration of porous silicon carbide derived from wood precursors (2006) (56)
Through-thickness determination of phase composition and residual stresses in thermal barrier coatings using high-energy X-rays (2010) (53)
Optimization of small-particle plasma-sprayed alumina coatings using designed experiments (2001) (51)
Residual Stress Analysis of Multilayer Environmental Barrier Coatings (2009) (50)
Thermal properties of pitch-derived graphite foam (2002) (50)
Freeze-cast alumina pore networks: Effects of freezing conditions and dispersion medium (2015) (49)
Tantalum oxide coatings as candidate environmental barriers (2004) (43)
Catalytic graphitization of three-dimensional wood-derived porous scaffolds (2011) (43)
Suspension- and solution-based freeze casting for porous ceramics (2017) (42)
Microcracking and R-curve behavior in SiC-TiB2 composites (1992) (41)
X-ray residual stress analysis of a ceramic thermal barrier coating undergoing thermal cycling (1993) (40)
Effect of pyrolyzation temperature on wood-derived carbon and silicon carbide (2009) (39)
Softening Reversal and Other Effects of a Change in Loading Rate on Fracture of Concrete (1995) (37)
Fracture of a textured anisotropic ceramic (2001) (35)
Evaluation of Reliability of Brittle Components by Thermal Stress Testing (1985) (35)
The Mechanical Properties of Semiconductors (1992) (34)
Noninvasive methods for the investigation of ancient Chinese jades: an integrated analytical approach (2007) (33)
Interfacial debonding and sliding in brittle-matrix composites measured using an improved fiber pullout technique (1995) (33)
Thermoreversible Gelcasting: A Novel Ceramic Processing Technique (2004) (31)
Role of Lamellae Morphology on the Microstructural Development and Mechanical Properties of Small-Particle Plasma-Sprayed Alumina (2004) (31)
On‐Site Identification of Early BÖTTGER Red Stoneware Made at Meissen Using Portable XRF: 1, Body Analysis (2014) (30)
Fracture energy of glass-alumina interfaces via the bimaterial bend test (1997) (30)
On-Site Identification of Early Böttger Red Stoneware Using Portable XRF/Raman Instruments: 2, Glaze & Gilding Analysis (2015) (30)
Forming textured microstructures via the gelcasting technique (2005) (30)
Textured microstructures in barium hexaferrite by magnetic field assisted gelcasting and templated grain growth (2001) (29)
Forming Single‐Phase Laminates via the Gelcasting Technique (1997) (28)
High‐temperature hardness of Ga1−xInxAs (1986) (28)
Processing–microstructure relationships for plasma-sprayed yttrium aluminum garnet (2008) (28)
Microstructure and mechanical properties of acicular mullite (2013) (28)
Hierarchical porous ceramics via two-stage freeze casting of preceramic polymers (2019) (27)
Effects of loading rate on the fracture of cementitious materials (1999) (26)
Development of Textured Microstructures in Ceramics with Large Thermal Expansion Anisotropy (1994) (25)
Thermal conductivity and phase evolution of plasma-sprayed multilayer coatings (2001) (25)
Cohesive crack modeling of influence of sudden changes in loading rate on concrete fracture (1995) (25)
A hierarchical study of the mechanical properties of gypsum (2010) (25)
Three-Phase 3D Reconstruction of a LiCoO2 Cathode via FIB-SEM Tomography (2016) (25)
Mechanical properties of wood-derived silicon carbide aluminum-alloy composites as a function of temperature (2008) (24)
Effect of interface properties on microcracking of iron titanate (1998) (23)
Crack Bridging by Inclined Fibers/Whiskers in Ceramic Composites (1992) (23)
Deformation behavior of undoped and In-doped GaAs in the temperature range 700–1100 °C (1987) (23)
Dislocation structures in In-doped and undoped GaAs deformed at 700-1100°C (1989) (23)
On the Use of Approximation Methods for Microcrack Shielding Problems (1992) (22)
Ceramic Laminates by Gelcasting (2009) (22)
Computer Simulations of R‐Curve Behavior in Microcracking Materials (1987) (22)
Deformation Mechanisms in Compression‐Loaded, Stand‐Alone Plasma‐Sprayed Alumina Coatings (2000) (21)
Toughening by Stress‐Induced Microcracking in Two‐Phase Ceramics (1988) (21)
Residual stress and microstructural evolution in tantalum oxide coatings on silicon nitride. (2005) (21)
The role of ceramic and glass science research in meeting societal challenges: Report from an NSF-sponsored workshop (2017) (21)
Thermal conductivity of high-porosity biocarbon preforms of beech wood (2010) (21)
Load partitioning in honeycomb-like silicon carbide aluminum alloy composites (2009) (21)
Use of a Crack‐Bridging Single‐Fiber Pullout Test to Study Steel Fiber/Cementitious Matrix Composites (2004) (19)
Residual stress in ceramics with large thermal expansion anisotropy (1996) (19)
Dense freeze‐cast Li 7 La 3 Zr 2 O 12 solid electrolytes with oriented open porosity and contiguous ceramic scaffold (2018) (19)
Transformation kinetics in plasma-sprayed barium- and strontium-doped aluminosilicate (BSAS) (2010) (19)
Analysis of Multi-scale Mechanical Properties of Ceramic Trusses Prepared from Preceramic Polymers (2020) (19)
Thermal conductivity of wood-derived graphite and copper–graphite composites produced via electrodeposition (2013) (18)
Nanoindentation analysis of the elastic properties of porous SiC derived from wood (2008) (18)
Influence of solute doping on the high-temperature deformation behavior of GaAs (1989) (18)
Thermal properties of wood-derived copper–silicon carbide composites fabricated via electrodeposition (2010) (17)
Nucleation-controlled freeze casting of preceramic polymers for uniaxial pores in Si-based ceramics (2017) (16)
Texture assessment of magnetically processed iron titanate (1996) (15)
X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites (2009) (15)
Dense garnet-type electrolyte with coarse grains for improved air stability and ionic conductivity (2020) (15)
A Statistical Analysis of Crack Deflection as a Toughening Mechanism in Ceramic Materials (1983) (15)
Microstructural Characterization of Small‐Particle Plasma Spray Coatings (2004) (15)
Modeling Macro-Sized, High Aspect Ratio Through-Hole Filling by Multi-Component Additive-Assisted Copper Electrodeposition (2013) (15)
Effect of microstructure on high-temperature compressive creep of self-reinforced hot-pressed silicon nitride (2000) (15)
In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite (2013) (14)
X-ray nanotomography analysis of the microstructural evolution of LiMn2O4 electrodes (2017) (13)
The role of NZP additions in plasma-sprayed YSZ: microstructure, thermal conductivity and phase stability effects (1999) (13)
Ferroelastic Toughening in Bismuth Vanadate (1991) (13)
Segregant-enhanced fracture in magnesium oxide (1990) (13)
Residual Stress and Microstructural Evolution in Environmental Barrier Coatings of Tantalum Oxide Alloyed with Aluminum Oxide and Lanthanum Oxide (2006) (13)
Thermal conductivity of high-porosity biocarbon precursors of white pine wood (2008) (12)
Processing of wood-derived copper–silicon carbide composites via electrodeposition (2010) (12)
Evolution of Impedance Spectra during Debonding and Pullout of Single Steel Fibers from Cement (2001) (12)
Fracture Properties on SiC Based Particulate Composites (1991) (12)
Processing of stepped-density alumina via gelcasting and reaction bonding techniques (2000) (11)
In-situ observation of evolving microstructural damage and associated effective electro-mechanical properties of PZT during bipolar electrical fatigue (2019) (11)
A thermoreversible gelcasting technique for ceramic laminates (2003) (11)
In situ stress analysis of multilayer environmental barrier coatings (2009) (10)
Effects of zinc oxide filler on the curing and mechanical response of alkyd coatings (2020) (10)
High-Temperature Hardness of Chemically Vapor-Deposited Diamond (1993) (9)
Tensile behavior of microcracking SiC-TiB2 composites (1995) (9)
Direct lamination of solid oxide fuel cell anode support, anode, and electrolyte by sequential tape casting of thermoreversible gel slips (2012) (9)
Internal stresses and phase stability in multiphase environmental barrier coatings (2007) (9)
Freeze-cast yttria-stabilized zirconia pore networks: Effects of alcohol additives (2018) (9)
High temperature stability and thermal expansion behavior of molybdenum-chromium M2C carbides (1997) (8)
In situ characterization of small-particle plasma sprayed powders (2002) (8)
Impact of doping on the mechanical properties of acicular mullite (2013) (8)
Texture and microstructural development in gelcast barium hexaferrite (2008) (8)
Young’s modulus and internal friction in porous biocarbon white pine wood precursors (2009) (7)
Liquid Desiccant Solvent Extraction of Alumina-Filled Thermoreversible Gels (2012) (7)
Moiré interferometry analysis of fiber debonding (2001) (7)
Guiding and Trapping Cracks With Compliant Inclusions for Enhancing Toughness of Brittle Composite Materials (2020) (7)
Temperature-Dependent Toughening in Whisker-Reinforced Ceramics (1987) (7)
Gelcasting of Ceramic Bodies (2012) (6)
High temperature properties of sintered alpha silicon carbide (1979) (6)
Thermal Conductivity , Phase Stability , and Oxidation Resistance of Y 3 Al 5 O 12 ( YAG ) / Y 2 O 3 – ZrO 2 ( YSZ ) Thermal-Barrier Coatings (2004) (6)
Fracture Diodes: Directional Asymmetry of Fracture Toughness. (2021) (6)
Coarsening of dendrites in solution-based freeze-cast ceramic systems (2021) (6)
Robust Cellular Shape‐Memory Ceramics via Gradient‐Controlled Freeze Casting (2019) (6)
Interfacial shear stresses in SiC and Al/sub 2/O/sub 3/ fiber-reinforced glasses (1988) (6)
Fracture strength of free‐standing chemically vapor‐deposited diamond films (1995) (6)
Hierarchical porous SiOC via freeze casting and self-assembly of block copolymers (2021) (6)
Synthetic crossed-lamellar microstructures in oxide ceramics (2005) (5)
Crack Stability in the Fracture of Cementitious Materials (1994) (5)
Effective dilatational transformation toughening in brittle materials (1993) (5)
The influence of loading rate on crack bridging processes in Al2O3 (1998) (5)
Thermal conductivity of the pine-biocarbon-preform/copper composite (2010) (5)
Frontiers of Materials Research: A Decadal Survey (2019) (5)
Processing and surface flaw tolerance of alumina bilayers (2005) (5)
Experimental Model Validation of High Aspect Ratio Through-Hole Filling by Additive-Assisted Copper Electrodeposition (2017) (5)
Acrylic Triblock Copolymer Design for Thermoreversible Gelcasting of Ceramics: Rheological and Green Body Properties (2009) (5)
Permeable carbon nanotube-reinforced silicon oxycarbide via freeze casting with enhanced mechanical stability (2020) (5)
Tensile Tests of Miniature Fiber Reinforced Ceramic Composites for Screening Process‐Property Relations (2008) (5)
Wood-derived copper–graphite composites produced via additive-assisted electrodeposition (2013) (5)
Freeze-cast alumina pore networks: Effects of processing parameters in steady-state solidification regimes of aqueous slurries (2018) (4)
Toughening Mechanisms for Ceramics in Automotive Applications (2008) (4)
The role of starting powder size on the compressive response of stand-alone plasma-sprayed alumina coatings (2002) (4)
Obreimoff revisited: Controlled heterogeneous fracture through the splitting of mica (2019) (4)
Stresses in Ytterbium Silicate Multilayer Environmental Barrier Coatings (2011) (4)
Interfacial frictional stresses and fracture toughness of biomorphic graphite/copper interfaces (2016) (4)
Damage Tolerance of Silicon Carbide‐ and Alumina‐Matrix Surface Composites (1996) (4)
Fracture of Brittle and Quasi-Brittle Engineering Materials (1993) (4)
Glass microstructure characterization by lazer light scattering, small angle X-ray scattering and electron microscopy (1982) (3)
Looking Back, Looking Forward: Materials Science in Art, Archaeology, and Art Conservation (2021) (3)
Processing, microstructure and mechanical behavior of SiC-based ceramics via naturally derived scaffolds (2007) (3)
Small Volumes Create Super(elastic) Effects (2013) (3)
Comparison of Focused Ion Beam and Conventional Techniques on Tem Specimen Preparation of Metal-Ceramic Interfaces (1998) (3)
Room-temperature cyclic fatigue of reaction-bonded silicon nitride using the double cleavage drilled compression specimen (1996) (3)
Heat capacity of the white pine biocarbon preform and the related biocarbon/copper composite (2009) (3)
Out‐of‐plane mechanical characterization of acicular mullite and aluminum titanate diesel particulate filters (2018) (3)
Forming tough, single phase laminates of Fe_2TiO_5 via magnetic-assisted gelcasting (1997) (2)
Ceramics: Microstructural Toughening (Excluding Transformation Toughening, Whisker Toughening, and Continuous Fiber Toughening) (2001) (2)
Chapter 4 Mechanical Behavior of Compound Semiconductors (1992) (2)
The separation, identification and characterization of radioactive particles in topsoil (1977) (2)
The dissociation of NZP (Ca0.5Sr0.5Zr4P6O24) during plasma spraying (2000) (2)
Mechanical Behavior of Alumina Reinforced with Carbon‐Coated Silicon Carbide Whiskers (1995) (2)
Microcracking Contributions to the Toughness of ZrO_2-Based Ceramics (1984) (2)
Elasticity and inelasticity of the SiC/Al-13Si-9Mg biomorphic metal ceramics (2008) (2)
Freeze‐cast honeycomb structures via gravity‐enhanced convection (2021) (2)
Development of Textured Microstructures in Ceramics with Large Thermal Expansion Anisotropy. (1994) (1)
Mechanical Behavior of Compound Semiconductors (1992) (1)
Oxidation resistance of AlN/BN via mullite-type Al18B4O33 (2022) (1)
Analysis of a Microcrack Prototype and Its Implications for Microcrack Toughening (1991) (1)
Three-Phase 3D Reconstruction of Li-Ion Batteries Electrodes Via FIB-SEM Tomography (2015) (1)
Freeze-Cast YSZ Pore Networks: Effects of Alcohol Additives (2017) (1)
Controlled symmetry breaking in superconducting UPt_3 (1997) (1)
Micro and Macro Mechanics of Fracture in Ceramics. (1982) (1)
Multiple Cracking and Interface Debonding in a Brittle Film on a Ductile Rod (1993) (1)
Mechanical Properties of Ga 1–xInxAs (1985) (1)
D-54 In Situ Heating Studies on the Internal Stresses of Multilayer Environmental Barrier Coatings (2008) (1)
Small Angle X-ray Scattering and Transmission Electron Microscopy of Water Containing Phase Separated Soda Lime Silica Glasses (1980) (1)
A stone kneeling figure in the Art Institute of Chicago: new evidence from scientific investigations and archaeological finds in China (2007) (1)
Segregant enhanced fracture of mechanics (1988) (1)
ACRYLIC TRIBLOCK COPOLYMER GELS FOR THERMOREVERSIBLE GELCASTING OF CERAMICS (2007) (1)
Strength testing of hot gas filters: Volume 6. Final report (1998) (0)
Deposition of Electrically Conductive Zirconium Monoxide (ZrO) via Plasma Spray‐Physical Vapor Deposition (PS‐PVD) (2022) (0)
Freeze casting of porous zirconia through sol-gel (2018) (0)
Transmission Electron Microscopy studies in deformed GaxIn1-xAs (1987) (0)
Fracture of a Textured Anisotropic Ceramic | NIST (2001) (0)
Micromechanics of Interfaces in High Temperature Ceramics (1990) (0)
Fracture behavior of SiC whisker-reinforced Al2O3 with modified interfaces (2008) (0)
MATERIALS EDUCATION: OPPORTUNITIES OVER A LIFETIME (2003) (0)
Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2016 (2017) (0)
Interfacial Shear Stresses in Sic and Al2O3 Fiber‐Reinforced Glasses (2008) (0)
Damage Mechanisms in Plasma-Sprayed Alumina Coatings (2000) (0)
Effects of Reinforcement Surface Morphology on Toughening of Brittle-Matrix Composites (1994) (0)
The Interface Between SiC Filaments and Si (2008) (0)
TEM Studies of Dislocations in Deformed Ga_(x)In_(1-x)As Single Crystals (1987) (0)
Internal Stresses in Ytterbium Disilicate Multilayer Environmental Barrier Coatings With Calcium-Magnesium-Aluminosilicate Exposure (2015) (0)
On loading rate effects in toughening processes (1996) (0)
Low Thermal Expansion Coatings for Carbon/Carbon Composites (1987) (0)
Hightemperature hardness of Ga1x In x As (2014) (0)
The Effect of Hydrothermal Aging on Swelling and Tg Depression for a Particle-Filled, Epoxy-Based Adhesive (1999) (0)
Thanks to Our Guest Editors and Reviewers for Their Critical Contributions in 2017 (2018) (0)
Micro-Mechanical Aspects of Fiber Debonding and Frictional Sliding in Brittle Matrix Composites (1993) (0)
4th International Conference on Competitive Materials and Technology Processes (IC-CMTP4) (2017) (0)
High Temperature Heterogeneous Materials (1994) (0)
DCB Methods for Examining Toughening in Alumina Reinforced with Carbon Coated SiC Whiskers (1993) (0)
Yb2Si2O7多層環境障壁コーティングの内部応力に及ぼすカルシウム‐マグネシウム‐アルミノケイ酸塩堆積の影響 (2016) (0)
Toughening in ZrO_2-Based Materials (1988) (0)
Ceraset (TM) and Blackglas (TM) mini-tow composites with carbon-coated Nicalon (TM) tows (1999) (0)
INTERGRANULAR CRACK-DEFLECTION TOUGHENING IN SILICON CARBIDE (1983) (0)
Quantitative Studies of Thermal Shock Based Upon a Novel Test Technique (1981) (0)
Microcrack Toughening in a SiC-TiB_2 Composite (1990) (0)
Anisotropic small-angle neutron scattering studies of ceramics (1999) (0)
MECHANICAL BEHAVIOR OF INTERPENETRATING Al-SiC COMPOSITES DERIVED FROM WOOD TEMPLATES (2007) (0)
Materials education: opportunities over a lifetime. A report on the 17th Biannual Conference of National Materials Policy, College Park, Maryland, USA, May 20-21, 2002 (2002) (0)
Gradient-controlled freeze casting of preceramic polymers (2022) (0)
Julia Randall Weertman (1926–2018) (2018) (0)
Micromechanics of Interfaces in High Temperature Composites (1992) (0)
Emerging Opportunities in Ceramics: Reports from the 4th International Congress on Ceramics (2013) (0)
Surface Energy as an Indicator of Interfacial Mechanical Response (1986) (0)
Educación en materiales: oportunidades a través de una vida (2002) (0)
The dissociation of NZP (Ca_(0.5)Sr_(0.5)Zr_4P_6O_(24)) during plasma spraying during plasma spraying (2000) (0)
High‐temperature carbothermal synthesis and characterization of Graphite/h‐BN bimaterials (2022) (0)
Strength and stability studies on mini-tow ceramic composites made with nitrided Nextel (TM) 312 fibers and silicon oxycarbide (1998) (0)
Nanoscale engineering of gold particles in 18th century Böttger lusters and glazes (2022) (0)
DESIGNED ANISOTROPY IN BRITTLE CERAMICS: MICA AS A MODEL SYSTEM (2019) (0)
Watching paint dry: Assessing the curing and aging of modern oil-based paints (2016) (0)
High-temperature hardness of Ga(1-x)In(x)As (1986) (0)
ANISOTROPIC STRUCTURE TO CONTROL NUCLEATION AND PROPAGATION: FRACTURE DIODES (2019) (0)
Strength and Structure of Ga sub 1-x In sub x As Alloys (1987) (0)
Controlled Symmetry Breaking in Superconducting UPt (1997) (0)
Environmental Barrier Coatings for the Energy Efficient Heat Engines Program (2004) (0)
Cyclic fatigue of reaction-bonded silicon nitride at elevated temperatures (1997) (0)
Strength and Structure of Ga(1-x)In(x)As Alloys (1986) (0)
Process zone formation in cement-aggregate composites (1992) (0)
Fiber Debonding and Pullout Processes in Ceramic Composites (2008) (0)
Interface Design in Brittle-Brittle Systems (1994) (0)
Strength and Structure of Ga1-xInx as Alloys (1986) (0)
R-curve behavior in SiC-TiB2 (2008) (0)

This paper list is powered by the following services:

Other Resources About Katherine Faber

en.wikipedia.org

What Schools Are Affiliated With Katherine Faber?

Katherine Faber is affiliated with the following schools: