Katsuhiko Asami | Academic Influence

Why Is Katsuhiko Asami Influential?

Katsuhiko Asami's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

The X-ray photo-electron spectra ofseveral oxides of iron and chromium (1977) (421)
Synthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance (2002) (389)
XPS determination of compositions of alloy surfaces and surface oxides on mechanically polished iron-chromium alloys (1977) (322)
The Mechanism of Atmospheric Rusting and the Protective Amorphous Rust on Low Alloy Steel(Chemistry) (1974) (294)
In-depth distribution of rusts on a plain carbon steel and weathering steels exposed to coastal-industrial atmosphere for 17 years (2003) (239)
An X-ray photo-electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HC1 (1979) (238)
A precisely consistent energy calibration method for X-ray photoelectron spectroscopy (1976) (231)
An XPS study of the passivity of a series of iron—chromium alloys in sulphuric acid*† (1978) (227)
Characterization of the surface oxide film of a Co-Cr-Mo alloy after being located in quasi-biological environments using XPS (2001) (227)
Bulk glassy Fe-Cr-Mo-C-B alloys with high corrosion resistance (2002) (223)
Repassivation of titanium and surface oxide film regenerated in simulated bioliquid. (1998) (209)
An XPS study of the surfaces on Fe-Cr, Fe-Co and Fe-Ni alloys after mechanical polishing (1984) (185)
ESCA study of the passive film on an extremely corrosion-resistant amorphous iron alloy (1977) (165)
An amorphous alloy membrane without noble metals for gaseous hydrogen separation (2000) (146)
The role of corrosion-resistant alloying elements in passivity (2007) (139)
Microstructure and corrosion behaviour in biological environments of the new forged low-Ni Co-Cr-Mo alloys. (2005) (123)
Effect of tetragonal ZrO2 on the catalytic activity of Ni/ZrO2 catalyst prepared from amorphous Ni–Zr alloys (2006) (115)
A novel Cu-based BMG composite with high corrosion resistance and excellent mechanical properties (2006) (109)
X-ray photoelectron spectrum of Fe2+ state in iron oxides (1976) (107)
XPS Characterization of the Surface Oxide Film of 316L Stainless Steel Samples that were Located in Quasi-Biological Environments (2002) (101)
Global CO2 recycling - Novel materials and prospect for prevention of global warming and abundant energy supply (1999) (97)
An X-ray photo-electron spectroscopic study of surface treatments of stainless steels (1979) (92)
Effect of Molybdenum on the Anodic Behavior of Amorphous Fe‐Cr‐Mo‐B Alloys in Hydrochloric Acid (1980) (90)
XPS study of the phase transition in pure zirconium oxide nanocrystallites (2005) (90)
Composition of surface oxide film of titanium with culturing murine fibroblasts L929. (2004) (89)
New Fe-Cr-Mo-(Nb, Ta)-C-B Glassy Alloys with High Glass-Forming Ability and Good Corrosion Resistance (2001) (89)
An ESCA study of the Fe2+/Fe3+ ratio in passive films on iron-chromium alloys (1976) (87)
Oxygen evolution anodes composed of anodically deposited Mn–Mo–Fe oxides for seawater electrolysis (2002) (86)
Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys (2000) (86)
The role of alloying elements in improving the corrosion resistance of amorphous iron base alloys (1980) (81)
The surface characterization of titanium and titanium-nickel alloys in sulfuric acid (1993) (79)
The corrosion behavior of amorphous Fe-Cr-Mo-P-C and Fe-Cr-W-P-C alloys in 6 M HCl solution (1992) (79)
XPS study on the surface films of a newly designed Ni-free Ti-based bulk metallic glass (2007) (76)
Influences of structure and composition on growth of anodic oxide films on TiZr alloys (2003) (74)
Structure of Anodic Films Formed on Magnesium (1996) (72)
The anodic behavior of amorphous Ni-19P alloys in different amorphous states (1989) (72)
Formation of bulk glassy Fe75-x-yCrxMoyC15B10 alloys and their corrosion behavior (2002) (72)
Effects of Chromium on the Glass Formation and Corrosion Behavior of Bulk Glassy Fe-Cr-Mo-C-B Alloys (2002) (68)
Effect of additional elements on the corrosion behavior of a Cu–Zr–Ti bulk metallic glass (2004) (67)
Passivity and its breakdown on sputter-deposited amorphous Al-early transition metal alloys in 1 M HCl at 30°C (1990) (63)
An X-ray photo-electron spectroscopic study of the passivity of ferritic 19Cr stainless steels in 1 NHCl (1979) (62)
The effect of air exposure on the corrosion behavior of amorphous Fe-8Cr-Mo-13P-7C alloys in 1 M HCl (1995) (61)
An X-ray photoelectron spectroscopic study of electrocatalytic activity of platinum group metals for chlorine evolution (1983) (61)
THE MECHANISM OF ATMOSPHERIC RUSTING AND THE PROTECTIVE AMORPHOUS RUST ON LOW ALLOY STEEL (1974) (61)
Glass formation, corrosion behavior and mechanical properties of bulk glassy Cu–Hf–Ti–Nb alloys (2005) (60)
Experimental evidence for the critical size of heterogeneity areas for pitting corrosion of Cr-Zr alloys in 6 M HCl (1998) (59)
Corrosion behavior of Cu-Zr-Ti-Nb bulk glassy alloys (2003) (59)
Materials for global carbon dioxide recycling (2002) (59)
An XPS study of anodic behavior of amorphous nickel-phosphorus alloys containing chromium, molybdenum or tungsten in 1 m CHl☆☆☆ (1984) (58)
Laser-processed corrosion-resistant amorphous NiCrPB surface alloys on a mild steel (1987) (58)
An x-ray photo-electron spectroscopy study of the passivity of amorphous Fe-Mo alloys (1979) (58)
Oxygen evolution on manganese–molybdenum oxide anodes in seawater electrolysis (1999) (56)
CO2 methanation catalysts prepared from amorphous Ni-Zr-Sm and Ni-Zr-misch metal alloy precursors (1999) (55)
Formation, corrosion behavior, and mechanical properties of bulk glassy Zr–Al–Co–Nb alloys (2003) (54)
Compositional dependence of the CO2 methanation activity of Ni/ZrO2 catalysts prepared from amorphous NiZr alloy precursors (1997) (54)
The corrosion behavior of sputter-deposited amorphous titanium-chromium alloys in 1 M and 6 M HCl solutions (1993) (53)
An XPS study of the corrosion behavior of sputter-deposited amorphous Al-W alloys in 1 M HCl (1991) (53)
Bulk glassy Ni(Co–)Nb–Ti–Zr alloys with high corrosion resistance and high strength (2004) (53)
The role of chromium and molybdenum in passivation of amorphous Fe-Cr-Mo-P-C alloys in deaerated 1 M HCl (1996) (52)
CaTiO(3) coating on titanium for biomaterial application--optimum thickness and tissue response. (2007) (52)
Anodic polarization behaviour of sputter-deposited AlZr alloys in a neutral chloride-containing buffer solution (1991) (51)
Microdissolution of calcium ions from calciumion-implanted titanium (1996) (51)
Microdissolution of calcium ions from calciumion-implanted titanium (1996) (51)
Importance of initial surface film in the degradation of stainless steels by atmospheric exposure (2003) (50)
The corrosion behavior of sputter-deposited amorphous chromium-zirconium alloys in 6 M HCl solution (1993) (50)
The corrosion behavior of sputter-deposited Mo-Ti alloys in concentrated hydrochloric acid (1996) (49)
A photoelectrochemical and ESCA study of passivity of amorphous nickel-valve metal alloys (1990) (49)
Electrodeposited Ni‐Fe‐C Cathodes for Hydrogen Evolution (2000) (48)
The oxidation of amorphous Zr-base binary alloys in air (1993) (48)
Recent progress in corrosion-resistant metastable alloys (1995) (48)
Corrosion Behavior of a Ti-Based Bulk Metallic Glass and Its Crystalline Alloys (2007) (48)
The passivation behavior of sputter-deposited W-Ta alloys in 12 M HCl (1998) (48)
Mechanism of chemical conversion coating film growth on magnesium and magnesium alloys (2001) (47)
The corrosion behavior of sputter-deposited amorphous CrNb and CrTa alloys in 12 M HCl solution (1993) (46)
Calcium phosphates formation on CaTiO3 coated titanium (2007) (44)
Calcium phosphate formation on titanium by low-voltage electrolytic treatments (2007) (44)
Fabrication and Corrosion Property of Novel Ti-Based Bulk Glassy Alloys without Ni (2007) (43)
Corrosion behavior and surface characterization of Ti-20Cr alloy in a solution containing fluoride. (2004) (43)
Changes in the surface compositions of FeCr alloys caused by heating in a high vacuum (1978) (43)
Quantitative X‐Ray Photoelectron Spectroscopy Characterization of Magnesium Oxidized in Air (2000) (43)
Inter-relationship between structure and dielectric properties of crystalline anodic zirconia (2005) (42)
Passivity and its breakdown on sputter-deposited amorphous AlTi alloys in a neutral aqueous solution with Cl− (1990) (42)
Characterization of Rust Layers on Weathering Steels Air-Exposed for a Long Period (2002) (42)
The corrosion behavior of sputter-deposited amorphous Mo-Zr alloys in 12 M HCl (1995) (41)
Electrochemical and xps studies of the corrosion behavior of sputter-deposited amorphous W-Zr alloys in 6 and 12 M HCl solutions (1997) (40)
Characterization of CaTiO3 thin film prepared by ion-beam assisted deposition (2006) (40)
Formation of Bulk Glassy Ni-(Co-)Nb-Ti-Zr Alloys with High Corrosion Resistance (2002) (39)
The corrosion behavior of sputter-deposited amorphous WTi alloys in 6 M HCl solution (1995) (39)
Corrosion-resistant amorphous surface alloys (1993) (38)
Preparation of corrosion-resistant amorphous Ni–Cr–P–B bulk alloys containing molybdenum and tantalum (2001) (38)
The corrosion behavior of sputter-deposited MoTa alloys in 12 M HCl solution (1996) (37)
Characterization of Zr–Al–N films synthesized by a magnetron sputtering method (2005) (37)
The corrosion behavior of sputter-deposited Mo-Nb alloys in 12 M HCl solution (1996) (37)
Influence of molybdenum species on growth of anodic titania (2002) (37)
The effect of heat treatment on the corrosion behavior of sputter-deposited aluminum-chromium alloys (1998) (37)
X‐ray Photoelectron Spectroscopy Investigation on the Low‐Temperature Degradation of 2 mol% Y2O3‐ZrO2 Ceramics (1996) (37)
Surface Oxide Films on Titanium Alloys Regenerated in Hanks' Solution (2002) (37)
An XPS study of passive films on corrosion-resistant CrZr alloys prepared by sputter deposition (1997) (37)
Composition of the near surface regions of conversion coated aluminium (1987) (37)
An attempt at preparation of corrosion-resistant bulk amorphous Ni–Cr–Ta–Mo–P–B alloys (2001) (36)
Nanocrystalline Manganese-Molybdenum-Tungsten Oxide Anodes for Oxygen Evolution in Acidic Seawater Electrolysis (2005) (36)
An auger electron spectroscopic study of the corrosion behavior of an amorphous Zr40Cu60 alloy (1997) (36)
Characterization of surfaces of amorphous NiFeP alloys (1984) (36)
Electrochemical and XPS studies on the passivation behavior of sputter-deposited W-Cr Alloys in 12 M HCl solution (1998) (35)
Electrodeposition of amine-terminatedpoly(ethylene glycol) to titanium surface (2007) (34)
Nanocrystalline manganese-molybdenum-tungsten oxide anodes for oxygen evolution in seawater electrolysis (2001) (34)
An XPS study of the corrosion behavior of sputter-deposited amorphous Cr-Nb and Cr-Ta alloys in 12 M HCl solution (1994) (34)
The corrosion behavior of sputter-deposited amorphous copper-tantalum alloys in 12 M HCl (1991) (33)
Change in corrosion behavior of amorphous NiP alloys by alloying with chromium, molybdenum or tungsten (1985) (32)
The corrosion behavior of sputter-deposited AlZr alloys in 1 M HCl solution (1992) (32)
Electrochemical and XPS studies of the corrosion behavior of sputter-deposited W-Nb alloys in concentrated hydrochloric acid solutions (1998) (31)
Chemical properties and applications of some amorphous alloys (1988) (31)
The corrosion behavior of sputter-deposited Al-Ti alloys in 1 N HCl (1991) (31)
The pitting corrosion behavior of rapidly solidified aluminum alloys (1987) (31)
Surface activation of manganese oxide electrode for oxygen evolution from seawater (1997) (31)
The corrosion behaviour of sputter-deposited amorphous Mn-Ti alloys in 0.5 M NaCl solutions (1997) (31)
Titanium‐implanted CaTiO3 films and their changes in Hanks' solution (2003) (31)
New Cu-Zr-Al-Nb Bulk Glassy Alloys with High Corrosion Resistance (2004) (29)
Corrosion mechanism of Ti-Cr alloys in solution containing fluoride. (2009) (29)
The corrosion behavior of sputter-deposited Cr-Mo alloys in 12 M HCl solution (1995) (29)
The pitting corrosion behavior of sputter-deposited amorphous AlTi alloys in a neutral chloride-containing solution (1990) (29)
Effects of Additional Elements on the Glass Formation and Corrosion Behavior of Bulk Glassy Cu-Hf-Ti Alloys (2003) (29)
On the unusual morphology of pitting corrosion of amorphous NiZr alloys (1993) (28)
Growth of anodic oxide films on oxygen-containing niobium (2005) (28)
Nanocrystalline electrodeposited Ni–Mo–C cathodes for hydrogen production (2004) (28)
The Effect of Tungsten on the Corrosion Behavior of Amorphous Fe‐Cr‐W‐P‐C Alloys in 1M HCl (1991) (28)
The sulfidation and oxidation behavior of sputter-deposited amorphous Al-Nb-Si alloys at high temperatures (1996) (28)
Anodic characteristics of amorphous nickel-value metal alloys containing small amounts of platinum group elements in 0.5 M NaCl (1987) (27)
High Strength Ni-Fe-W and Ni-Fe-W-P Alloys Produced by Electrodeposition (2003) (27)
High Temperature Oxidation Behavior of Amorphous Zr–Ni Alloys in Air (1995) (27)
Corrosion behavior of glassy Ni55Co5Nb20Ti10Zr10 alloy in 1 N HCl solution studied by potentiostatic polarization and XPS (2006) (26)
Electrochemical and XPS studies of Ni-based metallic glasses in boiling nitric acid solutions (2009) (26)
The influences of Mo addition and air exposure on the corrosion behavior of amorphous Fe8Cr13P7C alloy in de-aerated 1 M HCl (1996) (25)
AES studies on the dissolution of surface oxide from calcium-ion-implanted titanium in nitric acid and buffer solutions (1996) (25)
Oxide Films Formed on Magnesium and Magnesium Alloys by Anodizing and Chemical Conversion Coating (1998) (25)
Surface Characterization of Amorphous Zr-Al-(Ni, Cu) Alloys Immersed in Cell-Culture Medium (2002) (25)
Synergistic effect of three corrosion-resistant elements on corrosion resistance in concentrated hydrochloric acid (2001) (25)
XPS study of surface film on nickel alloys in hot concentrated NaOH (1979) (25)
Evaluation of Degradability of CaTiO3 Thin Films in Simulated Body Fluids (2004) (24)
The corrosion behavior of amorphous and crystalline Ni-10Ta-20P alloys in 12 M HCl (1996) (24)
The effect of microcrystallites in the amorphous matrix on the corrosion behavior of melt-spun CrNiP alloys (1991) (24)
Spontaneously passivated films on sputter-deposited Cr-Ti alloys in 6 M HCl solution (1997) (24)
The surface film formed on amorphous Pd-Ti-P alloy by anodic polarization in 2 m NaCl solution (1980) (23)
Formation, thermal stability, mechanical properties and corrosion resistance of Cu-Zr-Ti-Ni-Nb bulk glassy alloys (2003) (23)
CaTiO3 films sputter-deposited under simultaneous Ti-ion implantation on Ti-substrate (2005) (23)
The corrosion behavior of sputter-deposited amorphous AlCrMo alloys in 1 M HCl (1996) (23)
The effects of alloying elements on the passivity of sputter-deposited amorphous Al-Cr-Mo alloys in 1M HCl (1996) (22)
Preparation and Corrosion Resistance of Fe-Cr-Mo-C-B-P Bulk Glassy Alloys (2002) (22)
The corrosion behavior of amorphous NiCrP alloys in concentrated hydrofluoric acid (1992) (22)
An XPS study of passive films on Nickel and alloy 600 in acids (1985) (22)
A study of the structure of a passive film using angle-resolved X-ray photo-electron spectroscopy (1996) (22)
The effects of structural relaxation and crystallization on the corrosion behavior of electrodeposited amorphous NiP alloys (1991) (22)
Electrodeposited Co-Mo-C Cathodes for Hydrogen Evolution in a Hot Concentrated NaOH Solution (2003) (22)
The degradation of the corrosion resistance of sputter-deposited chromium–titanium alloys by nanoscale heterogeneity (1999) (21)
Chemical characteristics of the passive surface films formed on newly developed Cu–Zr–Ag–Al bulk metallic glasses (2008) (21)
Formation and corrosion behavior of glassy Ni–Nb–Ti–Zr–Co(–Cu) alloys (2007) (21)
The corrosion behavior of amorphous Ni-Cr-19P alloys in hydrochloric acid (1992) (21)
An X-ray photoelectron spectroscopic study of electrocatalytic activity for chlorine evolution on amorphous palladium-phosphorus alloys containing rhodium, iridium or platinum (1986) (21)
Some corrosion characteristics of stainless surface alloys laser processed on a mild steel (1986) (20)
The corrosion behavior of sputter-deposited amorphous Cr-Ni-Mo alloys in 12 M HCl (1994) (20)
Effects of nanoscale heterogeneity on the corrosion behavior of non-equilibrium alloys (2001) (20)
Characterization of Rust Layer on Weathering Steel exposed to the Atmosphere for 17 Years (2001) (20)
Electrochemical and XPS Studies on Corrosion Behavior of Amorphous Ni-Cr-P-B alloys (1977) (19)
Amorphous nickel-base alloy catalysts for oxidation of carbon monoxide by oxygen and nitrogen monoxide (1991) (19)
A more general method for ranking the enrichment of alloying elements in passivation films (2004) (19)
Electrochemical properties and surface analysis of Cu–Zr–Ag–Al–Nb bulk metallic glasses (2009) (19)
Effect of Tantalum on Corrosion Resistance of Ni–Nb(–Ta)–Ti–Zr Glassy Alloys at High Temperature (2005) (19)
Microstructure and electrochemical behavior of Ti-coatedZr55Al10Ni5Cu30 bulk metallic glass (2009) (18)
Surface Composition and Anodic Polarization Behavior of Zirconium-Based Amorphous Alloys in a Phosphate-Buffered Saline Solution (2002) (18)
Bioactivity of a Ni-Free Ti-Based Metallic Glass (2010) (18)
Effects of nanocrystalline heterogeneity on the corrosion behavior of sputter-deposited chromium-niobium alloys (2000) (18)
Effect of Sodium Hypophosphite on the Structure and Properties of Electrodeposited Ni-W-P Alloys (2003) (18)
Effects of H2 Sintering and Pt Upper Electrode on Metallic Bi Content in Sr0.9Bi2.1Ta2O9 Thin Films for Ferroelectric Memories Prepared by Sol-Gel Method (1998) (18)
The corrosion behaviour of sputter-deposited amorphous NiTi alloys in 1 M HCl (1994) (18)
Oxidation Behavior of Amorphous Ni‐Zr and Ni‐Zr‐Sm Alloys (2000) (18)
New Nanocrystalline Manganese-Molybdenum-Tin Oxide Anodes for Oxygen Evolution in Seawater Electrolysis (2006) (18)
The corrosion behavior of sputter-deposited amorphous Fe–Cr–Ni–Ta alloys in 12 M HCl (1999) (17)
Roles of aluminium and chromium in sulfidation and oxidation of sputter-deposited Al- and Cr-refractory metal alloys (2002) (17)
Anodic characteristics of amorphorous palladium-base alloys in sodium chloride solutions (1986) (16)
Anodically Deposited Mn-Mo-Fe Oxide Anodes for Oxygen Evolution in Hot Seawater Electrolysis (2003) (16)
Pitting potential and structure of sputter-deposited AlTi alloys (1991) (16)
Vitrification of PdCuSi alloy by laser-surface treatment (1984) (16)
The effect of structural relaxation on the passivation behavior of amorphous FeCrWPC alloys (1990) (16)
Pitting corrosion of amorphous Ni-Zr alloys in chloride ion containing sulfuric acid solutions (1997) (16)
An angle-resolved xps study of the in-depth structure of passivated amorphous aluminum alloys (1997) (16)
Recent Progress in Corrosion-Resistant New Alloys Prepared by Sputter Deposition (1996) (15)
Laser and electron beam processing of electrodes consisting of amorphous nickel-valve metal-platinum-group metal surface alloys on valve metals (1988) (15)
Formation of Hydroxyapatite on Ti-Coated Ti-Zr-Cu-Pd Bulk Metallic Glass (2009) (15)
The effect of hydrogen on the passivity of iron-based and nickel-based amorphous alloys (1991) (15)
The roles of tantalum and phosphorus in the corrosion behavior of Ni-Ta-P alloys in 12 M HCl (1997) (15)
An XPS study of passive films on sputter-deposited Cr-Nb alloys in 12 M HCl solution (1998) (15)
酸化鉄中におけるFe2+およびFe3+のESCAによる定量法 (1976) (15)
Electrodeposited Co-Ni-Fe-C Alloys for Hydrogen Evolution in a Hot 8 kmol m-3 NaOH (2006) (15)
Surface vitrification of Fe-based alloys by laser treatment (1984) (15)
Size and time dependences of the valence states of Sn ions in amphoteric tin oxide nanoparticles (2002) (14)
XPS study of corrosion behavior of Ti-18Nb-4Sn shape memory alloy in a 0.05 mass % HCl solution (2003) (14)
Glassy Ni-Ta-Ti-Zr(-Co) Alloys with High Thermal Stability and High Corrosion Resistance (2003) (14)
High Temperature Sulfidation and Oxidation Behavior of Sputter-Deposited Al-refractory Metal Alloys (1996) (14)
XPS and electrochemical studies of a melt-spun high chromium-nickel-phosphorus alloy in 6 M HCl (1992) (14)
The effect of phosphorus addition on the corrosion behavior of amorphous Fe-8Cr-P alloys in 9M H2SO4 (1995) (14)
Influence of alloying elements Ni and Nb on thermal stability and corrosion resistance of Cu-based bulk metallic glasses (2007) (14)
Corrosion-resistant amorphous aluminum alloys and structure of passive films (1997) (14)
The effect of molybdenum on the corrosion behavior of amorphous FeCrMoPC alloys in hydrochloric acid (1991) (14)
Surface characteristics of high corrosion resistant Ni–Nb–Zr–Ti–Ta glassy alloys for nuclear fuel reprocessing applications (2008) (13)
Suppression of Field Crystallization of Anodic Niobia by Oxygen (2006) (13)
The sulfidation of sputter-deposited niobium-base aluminum alloys (1995) (13)
The corrosion behavior of amorphous Fe-8Cr-13P-7C and Fe-8Cr-20P alloys in concentrated sulfuric acid (1994) (13)
XPS and electrochemical studies on the corrosion behaviour of sputter-deposited amorphous Mn-Nb alloys in a neutral chloride solution (1998) (13)
Magnetic properties of NiBi (2002) (13)
Change in the surface composition of amorphous FeCrMoPC alloys during air exposure (1995) (13)
Electrodeposited Co-Fe and Co-Fe-C Alloys for Hydrogen Evolution in a Hot 8 kmol m-3 NaOH Solution (2003) (13)
Microstructure and Corrosion Resistance of Ti–Zr–Cu–Pd–Sn Glassy and Nanocrystalline Alloys (2007) (13)
The corrosion behavior of CrP alloys in hydrofluoric acid (1993) (12)
Recent studies of chemical properties of amorphous alloys (1991) (12)
Laser-processed electrodes consisting of amorphous nickel-niobium-platinum group metal surface alloys on niobium (1987) (12)
Characterization of CO2 methanation catalysts prepared from amorphous Ni-Zr and NI-Zr-rare earth element alloys (1998) (12)
Electrochemical and XPS studies of the effects of alloying elements on the corrosion behavior of amorphous FeCrMetalloid alloys in 9 M H2SO4 (1993) (12)
Phase Change of Zr-Al-N and Nb-Al-N Films Prepared by Magnetron Sputtering Method (2007) (12)
Preparation of amorphous palladium-base surface alloys on conventional crystalline metals by laser treatment (1986) (11)
The effect of magnesium on the corrosion behavior of sputter-deposited amorphous AlMgTi ternary alloys in a neutral chloride solution (1993) (11)
The influence of concentration of hydrochloric acid solutions on the passivation behavior of sputter-deposited tungsten rich W–Nb alloys (1998) (11)
Metallic bismuth on strontium-bismuth tantalate thin films for ferroelectric memory application (2000) (11)
Recent Development of Highly Corrosion Resistant Bulk Glassy Alloys (2005) (11)
The effect of structural heterogeneity on the pitting corrosion behavior of melt-spun amorphous NiZr alloys (1997) (11)
The stability of passive state of melt-spun amorphous chromium-base alloys (1990) (11)
Characterization of Co-Al-O magnetic thin films by combined use of XPS, XRD and EPMA (1999) (11)
Roles of temperature and humidity in the oxidation of sputter-deposited Cu–Ta alloys in air (2002) (11)
Electrochemical and XPS studies of the passivation behavior of sputter-deposited Cr–Ta alloys in 12 M HCl (1998) (11)
Corrosion-resistant MnZrCr alloys in chloride-containing media (1999) (11)
Characterization of the Surface Oxide Film of Nickel-free Austenitic Stainless Steel Located in Simulated Body Environments (2002) (11)
Laser‐Processed Corrosion‐Resistant Amorphous Ni‐Cr‐P‐B Surface Alloys on a Mild Steel. (1987) (10)
Superlattice-like structure of sputter-deposited amorphous aluminum-heavy element alloys (1989) (10)
Effects of Ion Etching and Annealing in O2 Atmosphere Following Ion Etching on Properties and Chemistry of Sr0.9Bi2.1Ta2O9+a Thin Films (1999) (10)
Electrochemical and XPS studies of the corrosion behavior of sputter-deposited amorphous Fe–Cr–Ni–Nb alloys in 6 M HCl (1999) (10)
XPS and X-ray diffraction characterization of thin Co-Al-N alloy films prepared by reactive sputtering deposition (1998) (10)
The effect of molybdenum on the stability of passive films formed on amorphous Fe-Cr-Mo-P-C alloys by potentiostatic polarization in deaerated 1 M HCl (1997) (10)
Effect of the Preparation Conditions of a Pd/Si Dual Seedlayer on the Magnetic Properties of Co/Pd Multilayered Perpendicular Magnetic Recording Media (2003) (9)
The effect of alloying elements on the corrosion behaviour of sputter-deposited amorphous Mn–Ta–Cr alloys in 1 M H2SO4 (1998) (9)
Oxidation behavior of sputter-deposited Cu-Ta alloys in air (1997) (9)
Corrosion-Resistant Bulk Amorphous Ni-Cr-Ta-Mo-Nb-5P Alloys in Concentrated Hydrochloric Acids (2006) (9)
Characterization of Rust Layers on a Plain-Carbon Steel and Weathering Steels Exposed to Industrial and Coastal Atmosphere for Years (2006) (9)
Mechanical properties and corrosion behavior of (Cu0.6Hf0.25Ti0.15)90Nb10 bulk metallic glass composites (2007) (9)
Quantitative analysis of metallic ultra-thin films by grazing-exit electron probe x-ray microanalysis† (2002) (8)
The effect of phosphorus addition on the corrosion behavior of amorphous Ni-30Ta-P alloys in 12 M HCl (1995) (8)
Characterization of Surface of Amorphous Ni-Nb-Ta-P Alloys Passivated in a 12 kmol/m3 HCl Solution (2004) (8)
The Composition of Passive Films on Ferritic 30Cr Stainless Steels in H 2 SO 4 (1978) (8)
Blueshifts in the ultraviolet absorption spectra of amphoteric SnO2-x nanocrystalline particles (2002) (8)
Sulfidation- and oxidation-resistant alloys prepared by sputter deposition (1999) (8)
A Study on the Origin of Surface Reddening of 65/35 Brass during the Strip Production Process (1979) (8)
The effect of phosphorus on the passivation behavior of Ni-10Ta-P alloys in 12 M HCl (1995) (8)
The effect of microcrystallites in the amorphous matrix on the corrosion behavior of amorphous Fe-8Cr-P alloys (1995) (7)
An XPS Study of the Corrosion Behavior of Sputter-Deposited Amorphous Cr-Nb and Cr-Ta Alloys in 12 M HCl Solution. (1994) (7)
Compositions of amorphous NiFeP alloy surfaces (1984) (7)
Nitrogen monoxide decomposition catalysts prepared from amorphous Ni-valve metal-Pd alloys (1994) (7)
Erratum: “Structure of Anodic Films Formed on Magnesium” [J. Electrochem. Soc., 143, L62 (1996)] (1996) (7)
Decomposition of nitrogen monoxide over NiTa2O6-supported palladium catalysts prepared from amorphous alloy precursors (1996) (7)
LASER AND ELECTRON BEAM PROCESSING OF AMORPHOUS SURFACE ALLOYS ON CONVENTIONAL CRYSTALLINE METALS (1990) (7)
Corrosion Behavior of Sputter‐Deposited Mo‐Ta Alloys in 12 M HCl Solution. (2010) (7)
The Roles of Tantalum and Phosphorus in the Corrosion Behavior of Ni—Ta—P Alloys in 12 M HCl. (1997) (7)
Non-Destructive Determination of In-Depth Profile of Brass (1980) (7)
Characterization of the Surface Oxide Film on an Fe-Cr-Mo-N System Alloy in Environments Simulating the Human Body (2003) (7)
Characterization of Ferroelectric SrBi2Ta2O9 Thin Films Prepared from Alkoxide Solutions (1999) (7)
Correlation between composition, microstructure, and ferroelectric properties of SrBi{sub 2}Ta{sub 2}O{sub 9} thin films (1997) (7)
Localized thin-film analysis by grazing-exit electron probe microanalysis (2002) (6)
The influence of pre-immersion on the potentiostatic polarization behavior of amorphous Fe-Cr-Mo-P-C alloys in de-aerated 1 M HCl (1996) (6)
Corrosion Resistance of Metallic Glasses (2007) (6)
Silicon Contamination Adsorbed on Pure Titanium Plate during Soaking Test in Hanks' Balanced Saline Solution (2004) (6)
Extremely Corrosion-Resistant Bulk Amorphous Alloys (2001) (6)
Effect of Manganese on the Corrosion Behavior of Chromium-Bearing Amorphous Metal-Metalloid Alloys (1980) (6)
Preparation of Protective Multilayer SiO2 and Al2O3 Coatings on Austenitic Stainless Steel by Sol-Gel Method (1994) (6)
XPS analysis of amorphous NiNbSnPt alloy catalysts for electro-oxidation of formaldehyde (1991) (5)
Amorphous Co-Ni-P Alloys with High Saturation Magnetization Produced by Electrodeposition (2003) (5)
Change in Pitting Susceptibility with Alloy Heterogeneity Induced by Crystallization of Amorphous Alloys (1998) (5)
Appearance of a negative loop on the polarization curves of Pd78Si16Cu6−xCrx amorphous alloys in phosphate buffered saline solution (2001) (5)
High Corrosion Resistant Ni-Based Glassy Alloys in Boiling Nitric Acid Solutions (2009) (5)
Passivity and its breakdown on sputter-deposited amorphous Mn-Zr alloys in neutral chloride solutions (1998) (5)
Hydrogen evolution characteristics of sputter-deposited Co-Mo, Co-Al and Co-Mo-Al alloy electrodes in NaOH solution (1998) (5)
Cu-Hf-Ti-(Mo, Nb, Ta) Bulk Glassy Alloys with High Corrosion Resistance and High Strength (2005) (5)
The Effect of Tungsten on the Corrosion Behavior of Amorphous Fe‐Cr‐W‐ P‐C Alloys in 1 M HCl (1991) (5)
Surface Characterization and Anodic Polarization of Nitrogen-Ion-Implanted Nickel-Free Co–Cr–Mo Alloy (2005) (5)
The effect of phosphorus addition on the corrosion behavior of ARC-MELTED Ni10TaP alloys in 12 M HCl (1996) (5)
Anodic Characteristics of a Laser‐Processed Palladium‐Base Amorphous Surface Alloy on a Crystalline Nickel in a Sodium Chloride Solution (1986) (5)
Surface Characterization of Sputter-Deposited Cu-Ta Alloys by Auger Electron Spectroscopy (1996) (5)
Intermediary Layer of Titanium Oxide in Al₂O₃ /Cu Joint Using Amorphous Cu-Ti Filler Metals (1983) (5)
Surface Films Formed on Amorphous Co-Cr Alloys in 1N HCl (1979) (4)
The Corrosion Behavior of Ni-Ta-5P Alloys in Concentrated Hydrochloric Acid (1996) (4)
Characterization of Surface Oxide Film Formed on Ti–8Fe–8Ta–4Zr (2005) (4)
The Effects of Alloying Elements on the Passivity of Sputter‐Deposited Amorphous Al—Cr—Mo Alloys in 1 M HCl. (1996) (4)
Corrosion Behavior of Sputter-Deposited Amorphous W-Ti Alloys in 6 M HCl Solution. (1996) (4)
The Corrosion Behavior of Sputter-Deposited Amorphous Cr-Ni-Mo Alloys in 12 M HCl. (1994) (4)
Galvanic corrosion of dental amalgams in contact with titanium in terms of released ions : Biomaterials and bioengineering (2002) (4)
A Trial of Non-Destructive In-Depth Surface Analysis of Fe–Cr Alloys by XPS with Different Excitation X-Ray Energies (1978) (4)
The sulfidation and oxidation behavior of sputter-deposited Cr-refractory metal alloys at high temperatures (1997) (4)
Amorphous Fe-valve metal-Pt group metal alloy catalysts for methanation of CO2 (1994) (4)
Highly corrosion-resistant amorphous CrNiP alloys (1994) (4)
Chemical State and Properties of the New Layer Structure Compound PrRh4.8B2 Single Crystals Obtained by Molten Metal Flux Method Using Cu as Solvent (1999) (4)
AN XPS STUDY OF ANODIC BEHAVIOR OF AMORPHOUS NICKEL-PHOSPHORUS ALLOYS CONTAINING CHROMIUM, MOLYBDENUM OR TUNGSTEN IN 1 M HYDROCHLORIC ACID (1985) (4)
The Corrosion Behavior of Sputter‐Deposited Al‐Zr Alloys in 1 M HCl Solution (1992) (4)
Characterization of the Surface Oxide Film on an Fe-Cr-MoN System Alloy in Environments Simulating the Human Body (2003) (4)
Spontaneously Passivated Films on Sputter-Deposited Cr—Ti Alloys in 6 M HCl Solution. (1997) (4)
Corrosion Behavior of Sputter‐Deposited Amorphous Al‐Cr‐Mo Alloys in 1 M HCl. (1996) (3)
X-ray Photoelectron Spectroscopy Applied to Analysis of Metal Surfaces (1977) (3)
VITRIFICATION OF Fe-Cr-Mo-P-C ALLOYS ON ENTIRE SURFACES BY LASER TREATMENT (1985) (3)
Effects of Structural Relaxation and Crystallization on the Corrosion Behavior of Electrodeposited Amorphous Ni‐P Alloys. (1991) (3)
Composition of the Near Surface Regions of Conversion Coated Aluminium. (1987) (3)
Decomposition of Nitrogen Monoxide over Amorphous Co–65Zr Alloys Containing Platinum Group Elements (1993) (3)
Corrosion behavior of sputter-deposited Co-base alloy films in neutral solutions (1994) (3)
Preparation of Protective Alumina Coating on Austenitic Stainless Steel by Sol-Gel Method (1993) (3)
Adsorption of released ions from dental amalgams on titanium (2002) (3)
Field Crystallization of Anodic Niobia on Nb-O Substrates (2006) (3)
Joining of Alumina to Copper Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability) (1986) (3)
Surface Modification of Titanium Utilizing a Repassivation Reaction in Aqueous Solutions (2002) (3)
Amorphous NiNbPt alloy catalysts for electro-oxidation of ethylene (1994) (3)
Thermal stability, corrosion resistance, and surface analysis of Cu–Hf–Ti–Ni–Nb bulk metallic glasses (2009) (3)
Effect of phosphorus on the passivation behavior of amorphous Fe8Cr13P7C alloy in 9M H2SO4 solution (1994) (2)
Electrochemical behavior of a quasi-crystalline AlPdMn alloy in a chloride-containing solution (1994) (2)
Corrigendum to “Size and time dependences of the valence states of Sn ions in amphoteric tin oxide nanoparticles”: [Applied Surface Science 201/1–4 (2002) 69–74] (2003) (2)
Ion beam analyses of surface films formed on amorphous Fe12Mo18C alloy in 1 N HCl (1983) (2)
High temperature corrosion of sputter-deposited Al–Nb alloys (1994) (2)
New Nanocrystalline Manganese-molybdenum-tin Oxide Anodes for Oxygen Evolution in Neutral Seawater Electrolysis (2006) (2)
The Corrosion Behavior of Amorphous Ni-Cr-P Alloys in Concentrated Hydrofluoric Acid (1992) (2)
The Role of Phosphorus in Enhancing Corrosion Resistance of Amorphous Alloys (1997) (2)
Passivity of amorphous and crystalline NiTi alloys (1991) (2)
Corrosion Behavior of Amorphous and Crystalline Ni—10Ta—20P Alloys in 12 M HCl. (1996) (2)
AN XPS STUDY OF THE PASSIVITY OF A SERIES OF IRON-CHROMIUM ALLOYS IN SULFURIC ACID (1978) (2)
Structure and Corrosion Behavior of Electrodeposited Ni-P Alloys (1989) (2)
Influence of Surface Roughness on Non-Destructive in-Depth Analysis Using Angle-Resolved XPS and a Method for its Correction (1987) (2)
Chlorine Evolution Reaction on Amorphous Palladium-Phosphorus Alloys Containing Iridium, Rhodium or Platinum (1985) (2)
Electrochemical and XPS Studies of the Effects of Alloying Elements on the Corrosion Behavior of Amorphous Fe‐Cr‐Metalloid Alloys in 9 M H2SO4. (1994) (2)
AN X-RAY PHOTOELECTRON SPECTROSCOPIC STUDY ON THE ROLE OF MOLYBDENUM IN INCREASING THE CORROSION RESISTANCE OF FERRITIC STAINLESS STEELS IN HYDROCHLORIC ACID (1979) (2)
Transgranular Stress Corrosion Cracking of Mild Steel in 0.5N H2SO4 + 0.005N Kl Solution – XPS Observation of the Surface Film (1979) (2)
Amorphous alloy catalysts for decomposition of CCl2F2 by hydrolysis (1994) (2)
The Sulfidation and Oxidation Behavior of Sputter-Deposited Amorphous Al—Nb Alloys at High Temperatures. (2010) (2)
Characterization of Small Areas of Thin-Films by Grazing-Exit Electron Probe X-ray Microanalysis. (2002) (1)
The Corrosion Behavior of Amorphous Ni‐Cr‐19 P Alloys in Hydrochloric Acid (1992) (1)
ErratumErratum to “Bulk glassy Ni(Co)NbTiZr alloys with high corrosion resistance and high strength” [Mater. Sci. Eng. A 375–377 (2004) 368–371] (2005) (1)
Stress Corrosion Cracking of Type 304 Stainless Steel in 20% NaCl Aqueous Solution at 100°C under BERT Method (1979) (1)
The sulfidation and oxidation behavior of sputter-deposited AlNbMo alloys (1999) (1)
Origin of Hydrogen in Anodized Niobium (2006) (1)
The Corrosion Behavior of Sputter‐Deposited Amorphous Chromium‐ Zirconium Alloys in 6 M HCl Solution. (1994) (1)
NO decomposition catalysts prepared from amorphous NiTaPd alloys (1997) (1)
Effect of Phosphorus Addition on the Corrosion Behavior of Amorphous Fe-8Cr-P Alloys in 9 M H2SO4. (1995) (1)
Corrosion Behavior of Amorphous Nickel-Valve Metal Alloys in Boiling Concentrated Nitric and Hydrochloric Acids (1986) (1)
Quantitative XPS determination of Pt coverage on SrBi2Ta2O9 thin films for ferroelectric memories (2001) (1)
Anodic Behavior of Amorphous Ni-19P Alloys in Different Amorphous States. (1990) (1)
The Effect of Transformation to the Amorphous Structure on the Corrosion Resistance of Palladium Alloy Anodes for the Electrolysis of Hot Concentrated NaCl Solution (1983) (1)
AN ESCA STUDY OF THE IRON(2+) IRON(3+) RATIO IN PASSIVE FILMS ON IRON-CHROMIUM ALLOYS (1976) (1)
Amorphous Alloy Electrodes for Fuel Cells (1996) (1)
XPS Study of Passive Films on Nickel and Alloy 600 in Acids. (1986) (1)
AN X-RAY PHOTOELECTRON SPECTROSCOPY STUDY OF THE PASSIVITY OF AMORPHOUS IRON-MOLYBDENUM ALLOYS (1979) (1)
Effect of Magnesium on the Corrosion Behavior of Sputter‐Deposited Amorphous Al‐Mg‐Ti Ternary Alloys in a Neutral Chloride Solution. (1993) (1)
Surface modification of titanium utilizing a repassivation reaction in aqueous solutions : Biomaterials and bioengineering (2002) (1)
Spontaneous Passivation of Amorphous Bulk Ni-Cr-Mo-Ta-Nb-P Alloys in Concentrated HCl (2006) (1)
Sulfidation of Sputter‐Deposited Niobium‐Base Aluminum Alloys. (1995) (1)
Amorphous alloy electrodes for anodic oxidation of sulfite (1994) (1)
The Corrosion Behavior of Sputter‐Deposited Amorphous Cr‐Nb and Cr‐Ta Alloys in 12 M HCl Solution. (1994) (1)
Amorphous-to-Crystalline Transition of Anodic Niobia (2006) (1)
Formation of Hercynite (FeAl_2O_4) at Interface of Al_2O_3/Steel Joint (1982) (1)
Characterization of Amorphous Zr-Cu Alloy Surfaces by Electron Probe Microanalysis and Auger Electron Spectroscopy (1995) (1)
Effect of cathodic reduction on catalytic activity of amorphous alloy electrodes for electrooxidation of sulfite (1995) (1)
A Surface Study of Amorphous Nickel-Base Alloys Immersed in Liquid Sodium Contaminated with Impurities (1985) (0)
Effect of Phosphorus Addition on the Corrosion Behavior of Amorphous Ni-30 Ta-P Alloys in 12 M HCl. (1995) (0)
The Effect of Phosphorus on the Passivation Behavior of Ni‐10Ta‐P Alloys in 12 M HCl. (1995) (0)
amorphous alloys resistant to corrosion based on noble metals (1980) (0)
CO_2 Methanation Catalysts Prepared from Amorphous Ni-Valve Metal Alloys Containing Platinum Group Elements (1993) (0)
Effect of Phosphorus Addition on the Corrosion Behavior of Arc‐Melted Ni‐10Ta‐P Alloys in 12 M HCl. (1996) (0)
Decomposition of Nitrogen Monoxide over NiTa2O6‐Supported Palladium Catalysts Prepared from Amorphous Alloy Precursors. (1997) (0)
Mechanism of Peculiar Chlorine Evolution at Platinum Electrode in NaCl Solution (1996) (0)
CHANGES IN THE SURFACE COMPOSITIONS OF IRON-CHROMIUM ALLOYS CAUSED BY HEATING IN A HIGH VACUUM (1978) (0)
Corrosion Behavior of Cr-P Alloys in Hydrofluoric Acid. (1993) (0)
Microstructure and magnetic properties of Co-Cr-C/Ag/Ti/SiO2 multilayers (2001) (0)
Electrochemical Behaviour of Ti-based Bulk Metallic Glass and Nano-crystalline Alloys for Biomedical Applications (2008) (0)
Rust Layers Formed on Weathering Steels by Long-Term Atmospheric Exposure to Industrial and Coastal Environments (2007) (0)
Corrosion Behavior of Amorphous Nickel-Base Alloys in a Boiling Concentrated Sodium Hydroxide Solution (1988) (0)
EFFECT OF MOLYBDENUM ON THE ANODIC BEHAVIOR OF AMORPHOUS IRON-CHROMIUM-MOLYBDENUM-BORON ALLOYS IN HYDROCHLORIC ACID (1981) (0)
Amorphous Alloy Electrodes for Electro-oxidation of Propane (1995) (0)
Characterization and Dissolution Behavior in a Physiological Solution of Heat-Treated CaTiO3 Thin Films with Different Thicknesses (2007) (0)
Compositional non-uniformity in a sputter-deposited amorphous Al–Ta alloy (1989) (0)
Corrosion-resistant amorphous alloy (1988) (0)
X-RAY PHOTOELECTRON SPECTRUM OF IRON(2+) IN IRON OXIDES (1976) (0)
Some Corrosion Characteristics of Stainless Surface Alloys Laser Processed on a Mild Steel. (1986) (0)
312 Preparation and Corrosion Behavior of Fe-Cr-Mo-C-B(-Nb or Ta) System Glassy Alloys (2000) (0)
United States Patent ( 19 ) Hashimoto et al . 54 SURFACE ACTIVATED ALLOY (2017) (0)
The Corrosion Behavior of Amorphous and Crystalline Ni-Cr-Metalloid Alloys (1989) (0)
Fundamental Aspects and Applications of Several Surface Analysis Methods. (1993) (0)
The Corrosion Behavior of Amorphous Ni-Cr-Ta-P and Ni-Cr-Mo-P Alloys in a Hot Concentrated Phosphoric Acid (1988) (0)
Unusual Morphology of Pitting Corrosion of Amorphous Ni-Zr Alloys. (1993) (0)
Corrosion Behavior of Sputter‐Deposited Amorphous Copper‐Tantalum Alloys in 12 M HCl. (2010) (0)
CORROSION BEHAVIOR OF AMORPHOUS TITANIUM ALLOYS (2015) (0)
Corrosion Behavior of Sputter‐Deposited Amorphous Titanium‐Chromium Alloys in 1 M and 6 M HCl Solutions. (1993) (0)
Characterization of Ferroelectric SrBi2Ta2O9 Thin Films Prepared from Alkoxide Solutions. (1999) (0)
XPS Study of Electrocatalytic Activity for Chlorine Evolution on Amorphous Palladium - Phosphorus Alloys Containing Rhodium, Iridium or Platinum. (1986) (0)
XPS Characterization of High Electrical Resistance Soft Magnetic Thin Co-Al-N Films. (1997) (0)
XPS Determination of Diffusion Coefficients of Cations in Thin Passive Films on Alloys (2000) (0)
Extremely Corrosion-Resistant Bulk Amorphous Alloys (2001) (0)
For Correct Description of Analytical Results of Structure by Diffraction (2001) (0)
Corrosion-Resistant Amorphous Alloy Ribbons for Electromagnetic Filtration of Iron Rusts from Water (1985) (0)
The Corrosion Behavior of Amorphous Fe-8Cr-13P-7C and Fe-8Cr-20P Alloys in Concentrated Sulfuric Acid. (1994) (0)
Effects of Austempering on Fatigue Crack Propagation Resistance of Ductile Cast Irons (1990) (0)
Sputter-deposited amorphous Al–Mo–Si alloys resistant to high temperature sulfidation and oxidation (1994) (0)
The Corrosion Behavior of Sputter-Deposited Magnesium-Valve Metal Alloys (1993) (0)
Corrosion Behavior of Sputter-Deposited Al-Ti Alloys in 1N HCl. (1991) (0)
Chlorofluorocarbon decomposition method. (1991) (0)
Corrosion Behavior of Sputter-Deposited Amorphous Mo-Zr Alloys in 12 M HCl. (1995) (0)
Surface-activated amorphous alloys and supersaturated alloys for electrodes used for electrolysis of solutions and processes for activation of the surfaces. (1986) (0)
The Microcomposite Structure of Catalysts Prepared by Oxidation of Amorphous Ni–Ta–Pd Alloys (1997) (0)
The Effect of Microcrystallites in the Amorphous Matrix on the Corrosion Behavior of Melt-Spun Cr-Ni-P Alloys. (1991) (0)
Analysis of Surface Films by ESCA. (1996) (0)
Korrosionsbestaendige amorphous oberflaechenlegierungen and process for their manufacture. (1987) (0)
Application of Sputter Deposition Technique to the Preparation of Amorphous Alloy-Derived Catalysts for NO Decomposition (1997) (0)
, Alloys Corrosion-resistant amorphous noble-metal (1980) (0)
XPS Study of the Corrosion Behavior of Sputter-Deposited Amorphous Al- W Alloys in 1M HCl. (1991) (0)
Corrosion Behavior of Melt‐Spun Cr‐Ni‐20 P Alloys in Concentrated Hydrochloric and Hydrofluoric Acids. (1993) (0)
THE SURFACE FILM FORMED ON AMORPHOUS PALLADIUM-TITANIUM-PHOSPHORUS ALLOY BY ANODIC POLARIZATION IN 2M SODIUM CHLORIDE SOLUTION (1980) (0)
An X Ray Photoelectron Spectroscopic Study of Surface Films on Amorphous Fe-Cr-Mo-P-C Alloys in 6 N HCl at 80℃ (1983) (0)
Corrosion Behavior and Surface Characteristics of Ni-based and Cu-based Metallic Glasses (2008) (0)
The Electrocatalytic Oxidation of Ethylene and Methane, and Reduction of Oxygen on Gas-Diffusion Electrodes Made of Amorphous Nickel-Valve Metal-Platinum Group Metal Alloys (1993) (0)
Corrosion Behavior of Sputter‐Deposited Mo—Ti Alloys in Concentrated Hydrochloric Acid. (1997) (0)
The Effect of Tungsten Addition to the Intermediate IrO2 Layer of Mn-Mo-O/IrO2/Ti Electrodes on the Performance for Oxygen Evolution in Seawater Electrolysis (2006) (0)
Quantitative XPS Analysis of Surface Oxide Films on Metals and Alloys (1998) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Katsuhiko Asami?

Katsuhiko Asami is affiliated with the following schools:

Hokkaido University
Wako University
Tohoku University
Chiba Institute of Technology
Waseda University