Keith Scott Keith Scott
#109,070
Most Influential Person Now
Keith Scott Keith Scott's AcademicInfluence.com Rankings
Keith Scott Keith Scottchemistry Degrees
Chemistry
#2067
World Rank
#2916
Historical Rank
Chemical Engineering
#170
World Rank
#184
Historical Rank

Download Badge
Chemistry
Keith Scott Keith Scott's Degrees
- Masters Chemical Engineering Stanford University
- Bachelors Chemical Engineering University of California, Berkeley
Why Is Keith Scott Keith Scott Influential?
(Suggest an Edit or Addition)Keith Scott Keith Scott's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Anion-exchange membranes in electrochemical energy systems (2014) (1279)
- Electricity generation from cysteine in a microbial fuel cell. (2005) (498)
- Handbook of Industrial Membranes (1995) (432)
- A computational model for biofilm-based microbial fuel cells. (2007) (397)
- Microbial fuel cell performance with non-Pt cathode catalysts (2007) (295)
- Principles and Materials Aspects of Direct Alkaline Alcohol Fuel Cells (2010) (289)
- The impact of mass transport and methanol crossover on the direct methanol fuel cell (1999) (276)
- The degree and effect of methanol crossover in the direct methanol fuel cell (1998) (270)
- Performance and modelling of a direct methanol solid polymer electrolyte fuel cell (1997) (252)
- A single-chamber microbial fuel cell as a biosensor for wastewaters. (2009) (236)
- Carbon-supported manganese oxide nanocatalysts for rechargeable lithium–air batteries (2010) (230)
- Development of direct methanol alkaline fuel cells using anion exchange membranes (2004) (220)
- Effect of temperature on the performance of microbial fuel cells (2010) (215)
- Engineering aspects of the direct methanol fuel cell system (1999) (215)
- Direct oxidation alkaline fuel cells: from materials to systems (2012) (208)
- A study of the anodic oxidation of methanol on Pt in alkaline solutions (2003) (198)
- Production of hydrogen from domestic wastewater in a pilot-scale microbial electrolysis cell (2013) (194)
- Leaching and electrochemical recovery of copper, lead and tin from scrap printed circuit boards (2002) (187)
- Dynamics of the direct methanol fuel cell (DMFC): experiments and model-based analysis (2001) (181)
- Model based evaluation of the effect of pH and electrode geometry on microbial fuel cell performance. (2010) (180)
- Performance of carbon nanofiber supported Pd-Ni catalysts for electro-oxidation of ethanol in alkaline medium (2010) (178)
- Microbial fuel cells meet with external resistance. (2011) (170)
- A polybenzimidazole/sulfonated graphite oxide composite membrane for high temperature polymer electrolyte membrane fuel cells (2011) (168)
- A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell (2014) (168)
- Effect of increasing anode surface area on the performance of a single chamber microbial fuel cell (2010) (162)
- Carbon dioxide evolution patterns in direct methanol fuel cells (1999) (162)
- Dynamic modeling and simulation of a proton exchange membrane electrolyzer for hydrogen production (2011) (162)
- Cross-Linked Polymer-Ionic Liquid Composite Materials (2003) (158)
- Mathematical model for microbial fuel cells with anodic biofilms and anaerobic digestion. (2008) (154)
- A poly (ethylene oxide)/graphene oxide electrolyte membrane for low temperature polymer fuel cells (2011) (152)
- Performance of the direct methanol fuel cell with radiation-grafted polymer membranes (2000) (148)
- Application of Modified Carbon Anodes in Microbial Fuel Cells (2007) (145)
- CuxCo3−xO4 (0 ≤ x < 1) nanoparticles for oxygen evolution in high performance alkaline exchange membrane water electrolysers (2011) (142)
- A model for the liquid feed direct methanol fuel cell (1999) (137)
- Freestanding sulfonated graphene oxide paper: a new polymer electrolyte for polymer electrolyte fuel cells. (2012) (135)
- Methanol-tolerant oxygen reduction catalysts based on transition metal sulfides and their application to the study of methanol permeation (2000) (132)
- A critical review of integration analysis of microbial electrosynthesis (MES) systems with waste biorefineries for the production of biofuel and chemical from reuse of CO2 (2016) (131)
- The effect of flavin electron shuttles in microbial fuel cells current production (2010) (128)
- Factors affecting current production in microbial fuel cells using different industrial wastewaters. (2011) (127)
- Solid Acids as Electrolyte Materials for Proton Exchange Membrane (PEM) Electrolysis: Review (2012) (123)
- The effects of ionomer content on PEM water electrolyser membrane electrode assembly performance (2010) (122)
- Enzymatic Biofuel Cells—Fabrication of Enzyme Electrodes (2010) (122)
- Performance of a direct methanol alkaline membrane fuel cell (2008) (119)
- The effect of pretreatment of Vulcan XC-72R carbon on morphology and electrochemical oxygen reduction kinetics of supported Pd nano-particle in acidic electrolyte (2010) (118)
- Performance of a direct methanol fuel cell (1998) (117)
- Membrane electrode assemblies for PEM fuel cells: A review of functional graded design and optimization (2019) (116)
- Highly Stable Pt–Ru Nanoparticles Supported on Three-Dimensional Cubic Ordered Mesoporous Carbon (Pt–Ru/CMK-8) as Promising Electrocatalysts for Methanol Oxidation (2012) (114)
- Graphite oxide/Nafion composite membranes for polymer electrolyte fuel cells (2012) (111)
- Determination of kinetic parameters for borohydride oxidation on a rotating Au disk electrode (2006) (108)
- Sulfonated polyether ether ketone – sulfonated graphene oxide composite membranes for polymer electrolyte fuel cells (2014) (106)
- Direct methanol alkaline fuel cell with catalysed metal mesh anodes (2004) (105)
- Gas evolution and power performance in direct methanol fuel cells (1999) (104)
- Application of electro-active biofilms (2010) (100)
- Electrochemical and gas evolution characteristics of direct methanol fuel cells with stainless steel mesh flow beds (2001) (100)
- Radiation grafted membranes for superior anion exchange polymer membrane fuel cells performance (2012) (95)
- A non-precious metal bifunctional oxygen electrode for alkaline anion exchange membrane cells (2012) (95)
- The effect of electrode parameters on performance of a phosphoric acid-doped PBI membrane fuel cell (2010) (95)
- Limiting current behaviour of the direct methanol fuel cell (1999) (94)
- Comparative performance of ion exchange membranes for electrodialysis of nickel and cobalt (2003) (93)
- Selection of oxygen reduction catalysts for rechargeable lithium–air batteries—Metal or oxide? (2011) (92)
- A study of a microbial fuel cell battery using manure sludge waste (2007) (92)
- A high conductivity Cs2.5H0.5PMo12O40/polybenzimidazole (PBI)/H3PO4 composite membrane for proton-exchange membrane fuel cells operating at high temperature (2008) (91)
- Influence of operation conditions on direct borohydride fuel cell performance (2006) (90)
- A Numerical Model of a Liquid-Feed Solid Polymer Electrolyte DMFC and Its Experimental Validation (2003) (90)
- Electrochemical processes for clean technology (1995) (90)
- Carbon-supported manganese oxide nanoparticles as electrocatalysts for oxygen reduction reaction (orr) in neutral solution (2009) (89)
- Physical and electrochemical evaluation of ATO supported IrO2 catalyst for proton exchange membrane water electrolyser (2014) (89)
- Effect of chemically modified Vulcan XC-72R on the performance of air-breathing cathode in a single-chamber microbial fuel cell. (2010) (89)
- Modelling the micro–macro homogeneous cycling behaviour of a lithium–air battery (2013) (88)
- Modelling and experimental validation of a high temperature polymer electrolyte fuel cell (2007) (88)
- Numerical analysis of the optimum membrane/ionomer water content of PEMFCs: The interaction of Nafion® ionomer content and cathode relative humidity (2015) (87)
- Grafted polymer electrolyte membrane for direct methanol fuel cells (2005) (87)
- Material aspects of the liquid feed direct methanol fuel cell (1998) (87)
- Direct methanol polymer electrolyte fuel cell : analysis of charge and mass transfer in the vapour-liquid-solid system (1999) (86)
- Effect of the catalytic ink preparation method on the performance of high temperature polymer electrolyte membrane fuel cells (2006) (86)
- Nano-crystalline RuxSn1 − xO2 powder catalysts for oxygen evolution reaction in proton exchange membrane water electrolysers (2011) (85)
- Nitric acid activation of graphite granules to increase the performance of the non-catalyzed oxygen reduction reaction (ORR) for MFC applications (2009) (84)
- A microbial fuel cell using manganese oxide oxygen reduction catalysts (2009) (84)
- A Li-doped Co3O4 oxygen evolution catalyst for non-precious metal alkaline anion exchange membrane water electrolysers (2013) (83)
- Intensification of Water Electrolysis in a Centrifugal Field (2002) (82)
- Intensified membrane filtration with corrugated membranes (2000) (82)
- Electrochemical reduction of oxygen with iron phthalocyanine in neutral media (2009) (81)
- A semi-empirical model of the direct methanol fuel cell performance. Part I. Model development and verification (2003) (81)
- A polybenzimidazole/ionic-liquid-graphite-oxide composite membrane for high temperature polymer electrolyte membrane fuel cells (2015) (81)
- Electrochemical and fuel cell evaluation of Co based catalyst for oxygen reduction in anion exchange (2011) (79)
- A concise model for evaluating water electrolysis (2011) (78)
- Power from marine sediment fuel cells: the influence of anode material (2008) (78)
- A direct glucose alkaline fuel cell using MnO2–carbon nanocomposite supported gold catalyst for anode glucose oxidation (2013) (77)
- Investigation of supported IrO2 as electrocatalyst for the oxygen evolution reaction in proton exchange membrane water electrolyser (2014) (77)
- A mixed-reactants solid-polymer-electrolyte direct methanol fuel cell (2004) (77)
- Numerical investigation of the optimal Nafion® ionomer content in cathode catalyst layer: An agglomerate two-phase flow modelling (2014) (76)
- A polytetrafluoroethylene-quaternary 1,4-diazabicyclo-[2.2.2]-octane polysulfone composite membrane (2011) (75)
- An improved-performance liquid-feed solid-polymer-electrolyte direct methanol fuel cell operating at near-ambient conditions (2002) (74)
- Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: An anode partial flooding modelling (2016) (74)
- Electrochemical reaction engineering (1991) (73)
- Life cycle, techno-economic and dynamic simulation assessment of bioelectrochemical systems: A case of formic acid synthesis. (2018) (72)
- Study on the effect of the degree of grafting on the performance of polyethylene-based anion exchange membrane for fuel cell application (2016) (72)
- Material Aspects of the Design and Operation of Direct Borohydride Fuel Cells (2006) (72)
- Bioelectrochemical conversion of waste to energy using microbial fuel cell technology (2017) (71)
- A quaternary ammonium grafted poly vinyl benzyl chloride membrane for alkaline anion exchange membrane water electrolysers with no-noble-metal catalysts (2012) (71)
- Electrochemical Process Engineering (1995) (71)
- Fuel cell power generation from marine sediments: investigation of cathode materials. (2008) (70)
- Modelling microbial fuel cells with suspended cells and added electron transfer mediator (2009) (70)
- A polymethacrylate-based quaternary ammonium OH- ionomer binder for non-precious metal alkaline anion exchange membrane water electrolysers (2012) (70)
- Development of high-temperature PEMFC based on heteropolyacids and polybenzimidazole (2010) (69)
- Recycling of nickel–metal hydride batteries. I: Dissolution and solvent extraction of metals (2004) (69)
- The effect of electrode parameters on the performance of anion exchange polymer membrane fuel cells (2011) (68)
- Microfiltration of water in oil emulsions and evaluation of fouling mechanism (2008) (67)
- Preparation and characterisation of carbon-supported palladium nanoparticles for oxygen reduction in low temperature PEM fuel cells (2011) (66)
- Preparation of alkaline anion exchange polymer membrane from methylated melamine grafted poly(vinylbenzyl chloride) and its fuel cell performance (2011) (66)
- A review of proton exchange membranes based on protic ionic liquid/polymer blends for polymer electrolyte membrane fuel cells (2020) (66)
- Catalytic oxidation of alkyl aromatics using a novel silica supported Schiff base complex (1998) (65)
- A polymer electrolyte membrane for high temperature fuel cells to fit vehicle applications (2010) (65)
- Evaluation of hydrolysis and fermentation rates in microbial fuel cells (2011) (65)
- Modelling of operation of a lithium-air battery with ambient air and oxygen-selective membrane (2014) (64)
- Dynamic response of the direct methanol fuel cell under variable load conditions (2000) (63)
- Microbial fuel cells utilising carbohydrates (2007) (62)
- RuO 2 supported on Sb-doped SnO 2 nanoparticles for polymer electrolyte membrane water electrolysers (2011) (61)
- Open circuit versus closed circuit enrichment of anodic biofilms in MFC: effect on performance and anodic communities (2010) (60)
- A two dimensional agglomerate model for a proton exchange membrane fuel cell (2013) (60)
- Anode partial flooding modelling of Proton Exchange Membrane Fuel Cells: Model development and validation (2016) (60)
- Microbial fuel cells with highly active aerobic biocathodes (2016) (60)
- Advances in Mixed‐Reactant Fuel Cells (2005) (59)
- One-dimensional thermal model for direct methanol fuel cell stacks. Part I. Model development (1999) (59)
- Electrochemical Process Engineering: A Guide to the Design of Electrolytic Plant (1995) (58)
- Phosphoric acid‐doped electrodes for a PBI polymer membrane fuel cell (2011) (58)
- Development of a non-toxic electrolyte for soft gold electrodeposition: an overview of work at University of Newcastle upon Tyne (2003) (58)
- Three-dimensional cubic ordered mesoporous carbon (CMK-8) as highly efficient stable Pd electro-catalyst support for formic acid oxidation (2012) (56)
- The effect of operating conditions on the dynamic response of the direct methanol fuel cell (2000) (56)
- Intermediate temperature proton‐conducting membrane electrolytes for fuel cells (2014) (56)
- Performance of a high temperature polymer electrolyte membrane water electrolyser (2011) (56)
- Multi-variable optimisation of PEMFC cathodes based on surrogate modelling (2013) (56)
- Fabrication and evaluation of Pt–Fe alloys as methanol tolerant cathode materials for direct methanol fuel cells (2006) (56)
- Homogenization of current density of PEM fuel cells by in-plane graded distributions of platinum loading and GDL porosity (2018) (55)
- Direct methanol alkaline fuel cells with catalysed anion exchange membrane electrodes (2005) (55)
- Characterisation of platinised Ti mesh electrodes using electrochemical methods: methanol oxidation in sodium hydroxide solutions (2004) (54)
- Modelling of electrolyte degradation and cycling behaviour in a lithium–air battery (2013) (53)
- Polymer electrolyte membrane fuel cells: Principles and advances (2004) (53)
- Comparison of high-temperature and low-temperature polymer electrolyte membrane fuel cell systems with glycerol reforming process for stationary applications (2013) (53)
- Investigation of non-platinum cathode catalysts for direct borohydride fuel cells (2006) (53)
- A dynamic non-isothermal model of a laboratory intermediate temperature fuel cell using PBI doped ph (2010) (52)
- Paired electrolysis in a solid polymer electrolyte reactor—Simultaneously reduction of nitrate and oxidation of ammonia (2005) (51)
- A Sb‐doped SnP2O7 Solid Proton Conductor for Intermediate Temperature Fuel Cells (2008) (51)
- Composite membranes of polybenzimidazole and caesium-salts-of-heteropolyacids for intermediate temperature fuel cells (2011) (51)
- Electrochemical Hydrodehalogenation of Chlorinated Phenols in Aqueous Solutions I. Material Aspects (2003) (50)
- Efficient tuning of the Pt nano-particle mono-dispersion on Vulcan XC-72R by selective pre-treatment (2011) (50)
- Influence of membrane material and corrugation and process conditions on emulsion microfiltration (2007) (50)
- Degradation of radiation grafted hydroxide anion exchange membrane immersed in neutral pH: removal of vinylbenzyl trimethylammonium hydroxide due to oxidation (2017) (50)
- Novel anode structure for the direct methanol fuel cell (2005) (50)
- Synthesis of a carbon-coated NiO/MgO core/shell nanocomposite as a Pd electro-catalyst support for ethanol oxidation (2011) (49)
- A novel composite Nafion membrane for direct alcohol fuel cells (2009) (49)
- A solid-polymer electrolyte direct methanol fuel cell with a mixed reactant and air anode (2002) (49)
- Evaluation of new ion exchange membranes for direct borohydride fuel cells (2007) (48)
- A tubular microbial fuel cell (2007) (48)
- A Graphite Oxide Paper Polymer Electrolyte for Direct Methanol Fuel Cells (2011) (48)
- Preparation and characterization of polybenzimidzaole/diethylamine hydrogen sulphate for medium temperature proton exchange membrane fuel cells (2014) (48)
- A one dimensional model of a methanol fuel cell anode (2004) (46)
- High tolerance of and removal of cefazolin sodium in single-chamber microbial fuel cells operation. (2018) (46)
- Anode partial flooding modelling of proton exchange membrane fuel cells: Optimisation of electrode properties and channel geometries (2016) (46)
- Nafion-stabilised platinum nanoparticles supported on titanium nitride: An efficient and durable electrocatalyst for phosphoric acid based polymer electrolyte fuel cells (2013) (45)
- Analysis of high temperature polymer electrolyte membrane fuel cell electrodes using electrochemical impedance spectroscopy (2011) (45)
- Electrochemical recycling of tin, lead and copper from stripping solution in the manufacture of circuit boards (1997) (45)
- Direct ethanol fuel cells with catalysed metal mesh anodes (2007) (44)
- Effect of anion functional groups on the conductivity and performance of anion exchange polymer membrane fuel cells (2012) (43)
- The morphology control of polyaniline as conducting polymer in fuel cell technology (2006) (43)
- Investigation of Ti mesh-supported anodes for direct borohydride fuel cells (2006) (43)
- Crossflow microfiltration of water-in-oil emulsions using corrugated membranes (2001) (42)
- Durability and regeneration of activated carbon air-cathodes in long-term operated microbial fuel cells (2017) (42)
- A poly(R1R2R3)-N+/H3PO4 composite membrane for phosphoric acid polymer electrolyte membrane fuel cells (2009) (42)
- Production of formate by CO2 electrochemical reduction and its application in energy storage (2020) (42)
- Bioanode as a limiting factor to biocathode performance in microbial electrolysis cells. (2017) (42)
- Electrochemical principles and characterization of bioelectrochemical systems (2016) (41)
- Application of a solid polymer electrolyte reactor to remove nitrate ions from wastewater (2005) (41)
- A multilevel sustainability analysis of zinc recovery from wastes (2016) (41)
- On the repeatability and reproducibility of experimental two-chambered microbial fuel cells (2009) (41)
- Analysis of the kinetics of methanol oxidation in a porous Pt–Ru anode (2010) (40)
- Recycling of nickel–metal hydride batteries. II: Electrochemical deposition of cobalt and nickel (2004) (40)
- A High Temperature Polymer Electrolyte Membrane Fuel Cell Model for Reformate Gas (2011) (40)
- Electrolytic Synthesis and Characterization of Electrocatalytic Ni-W Alloy (2015) (39)
- Pressure drop modelling for liquid feed direct methanol fuel cells: Part 1. Model development (1999) (38)
- A parametric study of a platinum ruthenium anode in a direct borohydride fuel cell (2007) (38)
- Characterization and application of anion exchange polymer membranes with non-platinum group metals for fuel cells (2011) (38)
- An Evaluation of the Performance and Economics of Membranes and Separators in Single Chamber Microbial Fuel Cells Treating Domestic Wastewater (2015) (38)
- Catalytic isomerisation of α-pinene oxide to campholenic aldehyde using silica-supported zinc triflate catalysts: II. Performance of immobilised catalysts in a continuous spinning disc reactor (2007) (38)
- RuxNb1−xO2 catalyst for the oxygen evolution reaction in proton exchange membrane water electrolysers (2013) (38)
- Electrochemical Reduction of Oxygen on Carbon Supported Pt and Pt/Ru Fuel Cell Electrodes in Alkaline Solutions (2003) (37)
- Dynamic modelling of the voltage response of direct methanol fuel cells and stacks Part I: Model development and validation (2001) (37)
- The photoelectrocatalytic oxidation of aqueous nitrophenol using a novel reactor (2005) (37)
- Scale-up studies of the electrolytic reduction of oxalic to glyoxylic acid (1980) (37)
- A cell voltage equation for an intermediate temperature proton exchange membrane fuel cell (2009) (37)
- Enhanced electricity production by use of reconstituted artificial consortia of estuarine bacteria grown as biofilms. (2012) (36)
- A reversible water electrolyser with porous PTFE based OH− conductive membrane as energy storage cells (2014) (35)
- Fundamental and applied studies on the electrochemical hydrodehalogenation of halogenated phenols at a palladised titanium electrode (2004) (35)
- Performance of MnO2 Crystallographic Phases in Rechargeable Lithium-Air Oxygen Cathode (2012) (35)
- One-dimensional thermal model for direct methanol fuel cell stacks. Part II. Model based parametric analysis and predicted temperature profiles (1999) (35)
- Preparation and evaluation of a highly stable palladium yttrium platinum core-shell-shell structure catalyst for oxygen reduction reactions (2015) (35)
- The influence of a new fabrication procedure on the catalytic activity of ruthenium–selenium catalysts (2006) (35)
- Catalysed titanium mesh electrodes for ethylene glycol fuel cells (2007) (35)
- Effect of different chemical modification of carbon nanotubes for the oxygen reduction reaction in alkaline media (2014) (34)
- Electrochemical Hydrodehalogenation of Chlorinated Phenols in Aqueous Solutions II. Effect of Operating Parameters (2003) (34)
- Impact of applied cell voltage on the performance of a microbial electrolysis cell fully catalysed by microorganisms (2020) (34)
- Empirical Model Equations for the Direct Methanol Fuel Cell DMFCs (2002) (34)
- An investigation of anode materials in the anodic oxidation of sulphur dioxide in sulphuric acid solutions (1999) (34)
- The promise of fuel cell-based automobiles (2003) (34)
- Selective electrodeposition of metals from simulated waste solutions (1996) (33)
- Effect of pH and temperature on carbon-supported manganese oxide oxygen reduction electrocatalysts (2010) (33)
- The biocompatibility microorganisms‐carbon nanostructures for applications in microbial fuel cells (2007) (33)
- An investigation of Pt alloy oxygen reduction catalysts in phosphoric acid doped PBI fuel cells (2011) (33)
- Effect of dispersion methods of an unsupported Pt-Ru black anode catalyst on the power performance of a direct methanol fuel cell (2006) (32)
- Enhanced selectivity of carbonaceous products from electrochemical reduction of CO2 in aqueous media (2019) (32)
- Inhomogeneous distribution of platinum and ionomer in the porous cathode to maximize the performance of a PEM fuel cell (2017) (31)
- Crossflow microfiltration of organic/water suspensions (1994) (31)
- Improving performance of rechargeable Li-air batteries from using Li-Nafion ® binder (2014) (31)
- Process intensification: An electrochemical perspective (2018) (31)
- Towards an electrochemical process for recovering sulphur dioxide (1999) (30)
- A novel phosphoric acid loaded quaternary 1,4-diazabicyclo-[2.2.2]-octane polysulfone membrane for i (2011) (30)
- Polymer electrolyte membrane water electrolyser with Aquivion short side chain perfluorosulfonic acid ionomer binder in catalyst layers (2012) (29)
- A boron phosphate-phosphoric acid composite membrane for medium temperature proton exchange membrane fuel cells (2015) (29)
- Degradation of radiation grafted anion exchange membranes tethered with different amine functional groups via removal of vinylbenzyl trimethylammonium hydroxide (2018) (29)
- An Investigation of Palladium Oxygen Reduction Catalysts for the Direct Methanol Fuel Cell (2011) (29)
- A current distribution model of a porous fuel cell electrode (2004) (29)
- Application of sodium conducting membranes in direct methanol alkaline fuel cells (2006) (28)
- Direct Methanol Fuel Cells Using Thermally Catalysed Ti Mesh (2004) (28)
- Performance of polyethylene based radiation grafted anion exchange membrane with polystyrene-b-poly (ethylene/butylene)-b-polystyrene based ionomer using NiCo 2 O 4 catalyst for water electrolysis (2018) (28)
- Enhanced cycling stability of Li–O2 batteries by using a polyurethane/SiO2/glass fiber nanocomposite separator (2018) (28)
- A single chamber packed bed microbial fuel cell biosensor for measuring organic content of wastewater. (2009) (28)
- A comparative study of ptru and ptrusn thermally formed on titanium mesh for methanol electro-oxidation (2004) (27)
- Acclimatization of microbial consortia to alkaline conditions and enhanced electricity generation. (2016) (27)
- The catalytic activity and methanol tolerance of transition metal modified-ruthenium–selenium catalysts (2007) (27)
- Continuous Feed Microbial Fuel Cell Using An Air Cathode and A Disc Anode Stack for Wastewater Treatment (2009) (27)
- Chlorine evolution in a centrifugal field (2002) (26)
- Reuse of Ni-Co-Mn oxides from spent Li-ion batteries to prepare bifunctional air electrodes (2018) (26)
- Integrated air cathode microbial fuel cell-aerobic bioreactor set-up for enhanced bioelectrodegradation of azo dye Acid Blue 29. (2020) (25)
- The synthesis and characteristic of an anion conductive polymer membrane for alkaline anion exchange fuel cells (2012) (25)
- Direct Methanol Fuel Cells: Fundamentals, Problems and Perspectives (2007) (25)
- An analysis of the influence of mass transfer on porous electrode performance (2004) (25)
- Catalytic isomerisation of α-pinene oxide to campholenic aldehyde using silica-supported zinc triflate catalysts: I. Kinetic and thermodynamic studies (2007) (24)
- MICROBIAL FUEL CELLS - AN OPTION FOR WASTEWATER TREATMENT (2010) (24)
- Modelling pressure distribution and anode/cathode streams vapour–liquid equilibrium composition in liquid feed direct methanol fuel cells (2000) (24)
- Soluble Polystyrene‐b‐poly (ethylene/butylene)‐b‐polystyrene Based Ionomer for Anion Exchange Membrane Fuel Cells Operating at 70 °C (2018) (24)
- Rapid Nondestructive-Testing Technique for In-Line Quality Control of Li-Ion Batteries (2017) (24)
- Dynamic modelling of the voltage response of direct methanol fuel cells and stacks Part II: Feasibility study of model-based scale-up and scale-down (2001) (24)
- Biological and Microbial Fuel Cells (2012) (24)
- Biofilm growth from wastewater on MWNTs and carbon aerogels (2008) (24)
- Extending the dynamic range of biochemical oxygen demand sensing with multi-stage microbial fuel cells (2018) (24)
- Dimethoxymethane and trimethoxymethane as alternative fuels for fuel cells (2007) (23)
- Salt splitting with radiation grafted PVDF anion-exchange membrane (2003) (23)
- A study of PtRuO2 catalysts thermally formed on titanium mesh for methanol oxidation (2005) (23)
- Metal recovery using a moving-bed electrode (1981) (23)
- Determination of mass transfer coefficient of a cross-corrugated membrane reactor by the limiting-current technique (2001) (23)
- A H2SO4 Loaded Polybenzimidazole (PBI) Membrane for High Temperature PEMFC (2012) (23)
- Study of niobium and tantalum doped titania-supported Pt electrocatalysts for methanol oxidation and oxygen reduction reactions (2014) (23)
- Influence of Thermal Treatment on RuSe Cathode Materials for Direct Methanol Fuel Cells (2007) (23)
- Structure and reactivity of the Ru(0 0 0 1) electrode towards fuel cell electrocatalysis (2003) (22)
- A computational simulation of a hydrogen/chlorine single fuel cell (2006) (22)
- Efficient removal of nitrobenzene and concomitant electricity production by single-chamber microbial fuel cells with activated carbon air-cathode. (2017) (22)
- Application of anion exchange ionomer for oxygen reduction catalysts in microbial fuel cells (2012) (22)
- Mass Transport in Cross-Corrugated Membranes and the Influence of TiO2 for Separation Processes (2003) (22)
- Recovery of metal ions from spent solutions used to electrodeposit magnetic materials (2001) (22)
- A kinetic model for the direct methanol fuel cell anode based on surface coverage (2006) (22)
- A consideration of circulating bed electrodes for the recovery of metal from dilute solutions (1988) (22)
- Applications of poly ionic liquids in proton exchange membrane fuel cells: A review (2021) (22)
- Hydrodynamic modelling of direct methanol liquid feed fuel cell stacks (2000) (22)
- Application of crossflow microfiltration to emulsion separation in extraction processes (1992) (21)
- Electroseparation of cobalt and nickel from a simulated wastewater (1997) (21)
- An empirical model approach to gas evolution reactions in a centrifugal field (2003) (21)
- Simplified model for the direct methanol fuel cell anode (2007) (21)
- Radiation-grafted PVDF anion exchange membrane for salt splitting (2005) (21)
- Salt splitting in a three-compartment membrane electrolysis cell (2002) (21)
- On the dynamic response of the anode in microbial fuel cells. (2011) (20)
- Pressure drop modelling for liquid feed direct methanol fuel cells Part II. Model based parametric analysis (1999) (20)
- Influence of supporting electrolyte on ferricyanide reduction at a rotating disc electrode (1996) (20)
- Nano-structured gas diffusion electrode – A high power and stable cathode material for rechargeable Li-air batteries (2013) (20)
- Mass transfer characteristics of cross-corrugated membranes (2002) (20)
- A semi empirical model of the direct methanol fuel cell. Part II. Parametric analysis (2006) (20)
- The anodic behaviour of Ebonex® in oxalic acid solutions (2002) (20)
- Section 1 - Introduction to Membrane Separations (1995) (19)
- Section 14 - Biotechnology and medical applications (1995) (19)
- Engineering aspects of electrochemical hydrodehalogenation of 2,4-dichlorophenol in a solid polymer electrolyte reactor (2004) (19)
- A High-Performance Direct Methanol Fuel Cell Technology Enabled by Mediating High-Concentration Methanol through a Graphene Aerogel (2018) (19)
- Power loss and its effect on fuel cell performance (2005) (19)
- A polytetrafluoroethylene/quaternized polysulfone membrane for high temperature polymer electrolyte membrane fuel cells (2011) (19)
- Direct Glycerol Fuel Cells: Comparison with Direct Methanol and Ethanol Fuel Cells (2019) (19)
- Modelling Transport Phenomena and Performance of Direct Methanol Fuel Cell Stacks (2000) (19)
- Reactor engineering models of complex electrochemical reaction schemes—I. Potentiostatic operation of parallel and series reactions in ideal reactors (1985) (19)
- A study of 40 Ah lithium ion batteries at zero percent state of charge as a function of temperature (2014) (19)
- Energy Generation from Osmotic Pressure Difference Between the Low and High Salinity Water by Pressure Retarded Osmosis (2012) (18)
- An analysis of metal recovery by electrodeposition from mixed metal ion solutions—part I. Theoretical behaviour of batch recycle operation (1993) (18)
- Effect of treatment temperature on the performance of RuO2 anode electrocatalyst for high temperature proton exchange membrane water electrolysers (2013) (18)
- Carbon electrodes for microbial fuel cells (2007) (18)
- Evaluation of carbon-supported ruthenium-selenium-tungsten catalysts for direct methanol fuel cells (2007) (18)
- Chapter 1. Introduction to Electrolysis, Electrolysers and Hydrogen Production (2019) (18)
- Platinum decorated on partially exfoliated multiwalled carbon nanotubes as high performance cathode catalyst for PEMFC (2015) (18)
- A new fabrication method of an intermediate temperature proton exchange membrane by the electrospinning of CsH2PO4 (2013) (18)
- Effects of Applied Potential and Reactants to Hydrogen-Producing Biocathode in a Microbial Electrolysis Cell (2018) (18)
- Reactor Studies of Supported Ionic Liquids: Rhodium-catalysed Hydrogenation of Propene (2005) (18)
- Mass transfer rates in a DEM electrochemical cell (1996) (17)
- Analytic solution of diffusion reaction in spherical porous catalyst (2003) (17)
- Rearrangement of α-pinene oxide using a surface catalysed spinning disc reactor (SDR) (2004) (17)
- Improvement in methanol oxidation in a centrifugal field (2003) (17)
- Mass transfer characteristics of corrugated surfaces (2004) (17)
- Preparation of polytetrafluoroethylene porous membrane based composite alkaline exchange membrane with improved tensile strength and its fuel cell test (2012) (17)
- Feasibility study of electrochemical hydrodehalogenation of 2,4-dibromophenol in a paraffin oil (2004) (17)
- Hydrodehalogenation of 2,4-dibromophenol by electrochemical reduction (2003) (17)
- Platinum / carbon / polyaniline based nanocomposites as catalysts for fuel cell technology (2006) (17)
- Gel–Polymer Electrolytes Based on Poly(Ionic Liquid)/Ionic Liquid Networks (2020) (17)
- Modeling Flow Distribution for Internally Manifolded Direct Methanol Fuel Cell Stacks (2000) (16)
- Catalytic Oxidation of Ethylbenzene to Acetophenone Using Alumina-Supported Dichromate: Process Optimisation and Development of a Continuous Process (1997) (16)
- Salt splitting with radiation grafted PVDF membranes (2003) (16)
- A comparison of direct methanol fuel cell degradation under different modes of operation (2013) (16)
- The characteristics of power generation of static state fuel cells (2003) (16)
- Synthesis and Activity of A Single Active Site N-doped Electro-catalyst for Oxygen Reduction (2016) (15)
- A liquid-gas phase mixed-reactant fuel cell with a RuSeW cathode electrocatalyst (2008) (15)
- Approximate Analytical Solutions for Models of Three-Dimensional Electrodes by Adomian's Decomposition Method (2007) (15)
- Electrochemical hydrodehalogenation of 2,4-dichlorophenol in paraffin oil and comparison with aqueous systems (2004) (15)
- A study of the electrochemical reduction of nitrobenzene to p-aminophenol in a packed bed electrode reactor (1993) (15)
- Preparation and characterisation of Pt deposition on ion conducting membrane for direct methanol fuel cell electrodes (2005) (15)
- Optimization of Mesh-Based Anodes for Direct Methanol Fuel Cells (2010) (15)
- An analysis of metal recovery by electrodeposition from mixed metal ion solutions—part II. Electrodeposition of cadmium from process solutions (1993) (14)
- Feasibility of using PtFe alloys as cathodes in direct methanol fuel cells (2006) (14)
- High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane (2011) (14)
- A PBI‐Sb0.2Sn0.8P2O7‐H3PO4 Composite Membrane for Intermediate Temperature Fuel Cells (2011) (14)
- A PFSA Composite Membrane with Sulfonic Acid Functionalized TiO2 Nanotubes for Polymer Electrolyte Fuel Cells and Water Electrolysers (2013) (13)
- A Polymer Electrolyte Membrane Fuel Cell Based on Zirconium Phosphate and Phosphoric Acid (2009) (13)
- Effects of Piecewise Electric Field Operation on Sludge Dewatering: Phenomena and Mathematical Model (2018) (13)
- A preliminary investigation of the simultaneous anodic and cathodic production of glyoxylic acid (1991) (13)
- Microbial fuel cells: transformation of wastes into clean energy (2014) (13)
- Anode materials for microbial fuel cells (2016) (13)
- Intermediate Temperature Fuel Cell and Oxygen Reduction Studies With Carbon-Supported Platinum Alloy Catalysts in Phosphoric Acid Based Systems (2012) (13)
- Reactor engineering models of complex electrochemical reaction schemes—II. The effect of chemical reaction during batch electrolysis (1985) (13)
- Membranes and Separators for Microbial Fuel Cells (2016) (12)
- A study of the performance of a sparged packed bed electrode reactor for the direct electrochemical oxidation of propylene (2001) (12)
- The influence of mass transfer on the electrochemical synthesis of adiponitrile (1993) (12)
- A polytetrafluoroethylene porous membrane and dimethylhexadecylamine quaternized poly (vinyl benzyl chloride) composite membrane for intermediate temperature fuel cells (2015) (12)
- Evaluation of porous carbon felt as an aerobic biocathode support in terms of hydrogen peroxide (2017) (12)
- The selective oxidation of benzyl alcohols in a membrane reactor (2001) (12)
- Synergistic Coupling of a Molybdenum Carbide Nanosphere with Pt Nanoparticles for Enhanced Ammonia Electro-Oxidation Activity in Alkaline Media (2019) (12)
- The multiphase electrochemical synthesis of adiponitrile (1990) (12)
- Design and operation of a solid polymer electrolyte reactor for electrochemical hydrodehalogenation (2004) (11)
- Comparative performance of ion exchange membranes for salt splitting (2003) (11)
- Industrial Electrochemical Synthesis Processes: Recent Developments in Reactor Design (2008) (11)
- Liquid-liquid equilibria of phenol, acetic acid, oxalic acid, and glyoxylic acid between water and 1-decanol and tridecanol (1992) (11)
- An introduction to microbial fuel cells (2016) (11)
- Zinc removal and recovery from industrial wastewater with a microbial fuel cell: Experimental investigation and theoretical prediction. (2021) (11)
- The Influence of Mass Transfer on a Porous Fuel Cell Electrode (2004) (11)
- Maximum anode chamber volume and minimum anode area for supporting electrogenesis in microbial fuel cells treating wastewater (2016) (11)
- Impact of a Gold Nanocolloid Electrolyte on Li2O2 Morphology and Performance of a Lithium-Oxygen Battery. (2021) (11)
- An interpretation of kinetics in the electrohydrodimerization of acrylonitrile to adiponitrile (1985) (11)
- A polybenzimidazole/graphite oxide based three layer membrane for intermediate temperature polymer electrolyte membrane fuel cells (2016) (11)
- Progress in Alkaline Membrane Fuel Cells and Regenerative Fuel Cells (2013) (10)
- Metal deposition in diaphmgmless fluidized-bed electrolytic cells (1981) (10)
- An investigation of scale-up on the response of the direct methanol fuel cell under variable load conditions (2001) (10)
- Mass transport characterization of a novel gas sparged photoelectrochemical reactor (2001) (9)
- The role of temperature in oxalic acid electroreduction (1992) (9)
- A reaction model for the electrochemical synthesis of adipontrile (1990) (9)
- Hybrid membranes for fuel cells based on nanometer YSZ and polyacrylonitrile matrix (2006) (9)
- Pilot scale electrosynthesis of alkene oxides by direct and indirect oxidation in a sieve plate electrochemical reactor (1992) (9)
- Overview of the application of synthetic membrane processes (1996) (9)
- The effect of corrugated membranes on salt splitting (2003) (9)
- High temperature polymer electrolyte membrane fuel cell (2006) (9)
- The rôle of diffusion on the performance of porous electrodes (1983) (9)
- A study of oxygen reduction on carbon-supported platinum fuel cell electrocatalysts in polybenzimidazole/phosphoric acid (2011) (8)
- Simulation and reaction engineering of electrochemical gas/liquid reactions (1995) (8)
- A microbial fuel cell sensor for unambiguous measurement of organic loading and definitive identification of toxic influents (2020) (8)
- The effect of electrode material resistance on potential distribution in disc electrode cells (1983) (8)
- The continuous stirred tank electrochemical reactor. An overview of dynamic and steady state analysis for design and modelling (1991) (8)
- RECYCLING | Nickel–Metal Hydride Batteries (2009) (8)
- The electrochemical reduction of dimethyl maleate and dimethyl fumarate (1998) (8)
- Low temperature performance of microbial fuel cells (2010) (8)
- The effect of electrode ohmic losses and the role of the electrical connection in bipolar connected parallel plate electrodes (1983) (8)
- Direct methanol fuel cells for transportation (2000) (8)
- Reactor engineering models of complex electrochemical reaction schemes. III. Galvanostatic operation of parallel reactions in batch reactors (1985) (8)
- Evaluation of apparent lithium-ion diffusion coefficients in FePO4/LiFePO4 cathode material particles from linear non-equilibrium thermodynamics and principle of electroneutrality (2016) (8)
- Anion exchange polymer coated graphite granule electrodes for improving the performance of anodes in unbuffered microbial fuel cells (2016) (8)
- Interaction of cetyltrimethylammonium chloride micelles under static and hydrodynamic conditions (1996) (7)
- Cross-linked Polymers in Ionic Liquids: Ionic Liquids as Porogens (2005) (7)
- Reactor modelling for electrochemical processes. (2007) (7)
- Inter-micellar interaction under hydrodynamic conditions (1996) (7)
- Section 2 - Membrane Materials, Preparation and Characterisation (1995) (7)
- A study of current distribution in a DEM cell during bromate formation (1998) (7)
- The Role of Tungsten Oxide in the Enhancement of Carbon Monoxide Tolerance of Platinum-Based Hydrogen Oxidation Catalysis. (2020) (7)
- Determination of a Mass-Transfer Coefficient Using the Limiting-Current Technique (2002) (7)
- Hydrogen generation by alcohol reforming in a tandem cell consisting of a coupled fuel cell and electrolyser (2020) (7)
- Short communication the effectiveness of particulate bed electrodes under activation control (1982) (7)
- Diethylmethylammonium trifluoromethanesulfonate protic ionic liquid electrolytes for water electrolysis (2020) (6)
- Determining the Effect of Plasma Pre‐Treatment on Antimony Tin Oxide to Support Pt@Pd and the Oxygen Reduction Reaction Activity (2015) (6)
- Characterisation of thermally deposited platinum and palladium catalysts for direct formic acid fuel cells (2007) (6)
- Electrolytic reduction of oxalic acid to glyoxylic acid: a problem of electrode deactivation (1986) (6)
- Al2O3 Disk Supported Si3N4 Hydrogen Purification Membrane for Low Temperature Polymer Electrolyte Membrane Fuel Cells (2013) (6)
- Section 5 - Separation of liquid mixtures/pervaporation (1995) (6)
- Ion-exchange and charge driven processes (1996) (6)
- Selectivity characteristics of the electrohydrodimerization of acrylonitrile (1987) (6)
- Secondary Impact of Manganese on the Catalytic Properties of Nitrogen‐Doped Graphene in the Hydrogen Evolution Reaction (2017) (6)
- On adsorption rate modelling in electrochemical reactions (1992) (6)
- Electrochemical hydrodehalogenation of 2,4-dibromophenolin paraffin oil using a solid polymer electrolyte reactor. (2004) (6)
- Section 4 - Air and gas filtration and cleaning (1995) (6)
- Electrochemical reaction with parallel reversible surface adsorption: Interpretations of the kinetics of anodic oxidation of aniline and phenol to carbon dioxide (1987) (5)
- Electro-oxidation of Ethanol on Carbon Supported PtSn and PtSnNi Catalysts (2016) (5)
- Membrane electrode assemblies for polymer electrolyte membrane fuel cells (2012) (5)
- Electrochemical Investigation of Aerobic Biocathodes at Different Poised Potentials: Evidence for Mediated (2014) (5)
- An Isothermal Study of the Electrochemical Performance of Intermediate Temperature Solid Oxide Fuel Cells (2017) (5)
- Electrolysis of simulated flue gas solutions in an undivided cell (1997) (5)
- Reactor analysis of series and parallel electrochemical reactions during galvanostatic operation (1987) (5)
- A study of glyoxylic acid synthesis in an undivided cell (1990) (5)
- Gas and Liquid Mass Transport in Solid Polymer Electrolyte Fuel Cells (1999) (5)
- A Composite Membrane of Caesium Salt of Heteropolyacids/Quaternary Diazabicyclo-Octane Polysulfone with Poly (Tetrafluoroethylene) for Intermediate Temperature Fuel Cells (2012) (5)
- A Quaternary Polybenzimidazole Membrane for Intermediate Temperature Polymer Electrolyte Membrane Fuel Cells (2013) (5)
- A theoretical study of the effectiveness of particulate electrodes (1982) (5)
- Electrocatalysis in the Direct Methanol Alkaline Fuel Cell (2009) (5)
- The Effect of Dehydration in the Oxidation of Ethylbenzene to Acetophenone with Supported Catalysts (2001) (5)
- Zirconium and Ebonex® as cathodes for sulphite ion oxidation in sulphuric acid (1999) (5)
- Modelling of a Na-air battery with porous gas diffusion electrode (2016) (5)
- Low Cost Materials for the Air Cathodes in Single-Chamber Microbial Fuel Cells: A Mini Review (2016) (4)
- Evaluation of intake charge hydrogen enrichment in a heavy-duty diesel engine (2018) (4)
- Electrolytic Reactor Design, Selection, and Scale-up (1995) (4)
- Transient Response and Steady-State Analysis of the Anode of Direct Methanol Fuel Cells Based on Dual-Site Kinetics (2011) (4)
- Electrochemical Methods for the Treatment of Industrial Process Streams and Effluents: Part I: Cell Design and the Recovery of Dissolved Metals by Electrodeposition (2008) (4)
- Direct Methanol Fuel Cells (2012) (4)
- A fluorinated polymer/inorganic composite electrolyte membrane for intermediate temperature fuel cells (2012) (4)
- A New PtRu Anode Formed by Thermal Decomposition for the Direct Method Fuel Cell (2005) (4)
- A Model of a High-Temperature Direct Methanol Fuel Cell (2013) (3)
- Lead air battery: Prototype design and mathematical modelling (2019) (3)
- The evaluation of electrochemical reaction rate data using first order analytical models (1988) (3)
- The selective oxidation of benzyl alcohol using a novel catalytic membrane reactor (2002) (3)
- Handbook of Fuel Cells, vol. 1–4, W. Vielstich, A. Lamm, H.A. Gasteiger (Eds.). John Wiley, Chichester (2003) (2004) (3)
- Polymer electrolyte fuel cells, advances in research and development (2007) (3)
- Electrochemical Oxygen Technology : By K. Kinoshita. The Electrochemical Society Inc., 1992, 431 pp., £98 (1993) (3)
- An analysis of electrochemical reactions followed by series or complex chemical reactions (1988) (3)
- Modelling for surface electrochemical reactions (1993) (3)
- An integrated electrochemical reaction and supported liquid membrane approach to recycling (1993) (3)
- IN-SITU FOURIER-TRANSFORM INFRARED STUDY OF THE ELECTROCHEMICAL HYDRODIMERIZATION OF FORMALDEHYDE (1995) (3)
- Performance of the Direct Methanol Carbonate Fuel Cell Using Anion Exchange Materials and Non‐Noble Metal Cathode Catalyst (2013) (3)
- Section 11 - Industrial waste water and effluent treatment (1995) (2)
- Chapter 11. Conclusions: Electrolytic Hydrogen Production and Sustainable Routes (2019) (2)
- The Selective Oxidation of Benzyl Alcohols in a Membrane Reactor. (2001) (2)
- Process simulation of the anodic oxidation of benzene to p-benzoquinone in a two-phase electrolyte (1992) (2)
- Mass transfer in flow fields (2010) (2)
- Application of modelling and simulation to electro-organic reaction processes to enhance process control strategy (1988) (2)
- The influence of mass transport on the effectiveness of particulate bed electrodes (1983) (2)
- The enhancement effect of tungsten on the kinetics of oxygen reduction at novel RuSeW electrocatalysts (2008) (2)
- Section 3 - Gas separations (1998) (2)
- Preparation of a Chemically Stable Polysulfone-based Anion Exchange Membrane Using DABCO as the Quaternization Agent (2016) (2)
- Characterization of Low Cost Ion Conducting Poly(AAc-co-DMAPMA) Membrane for Fuel Cell Application (2015) (2)
- An approximate solution to the model of a sparged packed bed electrode reactor (2002) (2)
- Enhancing hydrogen production through anode fed-batch mode and controlled cell voltage in a microbial electrolysis cell fully catalysed by microorganisms. (2021) (2)
- Mass Transport Characteristics of Cathodes in a Phosphoric Acid Polybenzimidazole Membrane Fuel Cell (2011) (2)
- Recycle reactor models for complex electrochemical/chemical reaction systems (1985) (2)
- Production of ethene oxide in a sieve plate electrochemical reactor Part I: Influence of sieve plate design, electrode material and pH (1996) (2)
- A high temperature PEMFC integrated with a diesel reforming system (2008) (2)
- No re-calibration required? Stability of a bioelectrochemical sensor for biodegradable organic matter over 800 days (2021) (2)
- Aerobic Biocathodes for Microbial Fuel Cells (2014) (2)
- Section 18 - Membranes for electrochemical cells (1995) (2)
- A diethyl methyl ammonium triflate based protic ionic liquid polymer membrane for intermediate temperature water electrolysis (2020) (2)
- Section 16 - Recovery of salts, acids and bases (1995) (2)
- Section 12 - Absorption, desorption and extraction with membranes (1995) (2)
- Engineering and modelling of large scale liquid fed direct methanol fuel cells stacks (1999) (2)
- Production of ethene oxide in a sieve plate electrochemical reactor Part II: Mathematical reactor model and factors affecting the relative concentrations of ethene and bromine (1996) (1)
- Reduction of carbon dioxide to formic acid in a solid polymer electrolyte (SPE) reactor. (2001) (1)
- A note on the effectiveness of fixed bed electrodes (1986) (1)
- Increasing of the performances of direct methanol combustion fuel cells (2007) (1)
- Three dimensional model of a high temperature PEMFC using PBI doped phosphoric acid membranes. Study of the flow field effect on performance (2011) (1)
- Progress in alkaline membrane fuel cells and electrolysers (2013) (1)
- Electrochemical Oxidation of Methanol in a Polymer Electrolyte Fuel Cell: Modelling and Experimental Validation of Current-Voltage Characteristics (1998) (1)
- Reaction Engineering and Digital Simulation in Electrochemical Processes (1995) (1)
- Performance of a multistage electrochemical sieve plate reactor (1995) (1)
- Aspects of Mass and Heat Transfer and the Energetics of Electrolytic Cell Systems (1995) (1)
- Electrochemical aspects of chemical waste minimisation (1995) (1)
- Electrochemical Treatment of Chlorinated Organics (2001) (1)
- An Investigation of Anode Materials in the Anodic Oxidation of Sulfur Dioxide in Sulfuric Acid Solutions. (1999) (1)
- The direct methanol fuel cell (1996) (1)
- Membrane reactors for electrochemical synthesis processes (1994) (1)
- Mathematical reactor modelling for coupled chemical and electrochemical processes: the ECE system (1994) (1)
- Studies on Sodium Borohydride Fuel Cells (2009) (1)
- Reactor engineering models of complex electrochemical reaction schemes IV. Galvanostatic operation of series reactions with solvent decomposition (1985) (1)
- The influence of adsorption in electrochemical reaction modelling (1990) (1)
- The Effect of Intermittent Limiting Anodic Current Stimulation on the Electro Activity of Anodic Biofilms (2017) (1)
- A model for fluid/fluid reactions using electrochemically generated mediators (1988) (1)
- Free Standing Graphene Oxide Paper : New Polymer Electrolyte for Polymer Electrolyte Fuel Cells (2012) (1)
- Reactor analysis of multiple order series electrochemical reactions: an analysis of the electro-oxidation of benzene to p-benzoquinone (1989) (1)
- PERFORMANCE & MODELLING OF DIRECT METHANOL FUEL CELL STACKS (1999) (1)
- RuxNb1LxO2 catalyst for the oxygen evolution reaction in proton exchange membrane water electrolysers5 (2013) (1)
- Influence of Dispersed Particulates on Mass Transport in Cross-Corrugated Structures (2004) (1)
- Section 7 - Microfiltration (1998) (1)
- Introduction to Electrochemical Engineering (1995) (1)
- (Invited) Performance and Stability of Radiation Grafted Based Anion Exchange Membrane Electrolysers (2020) (1)
- Rechargeable Alkali and Alkaline Earth Metal-Air Batteries – Potential and Challenges (2014) (0)
- Catalytic Oxidation of the Side Chain of Alkylaromatics Using a Triphasic System. (2001) (0)
- Polymer-supported ionic liquids as catalytic reaction media (2004) (0)
- Mixed-reactants direct methanol fuel cell (2003) (0)
- Determining HTPEM electrode parameters using a mechanistic impedance model (2012) (0)
- Liu XT, Yu EH, Scott K.Preparation and evaluation of a highly stable palladium yttrium platinum core-shell-shell structure catalyst for oxygen reduction (2014) (0)
- Section 17 - Food industry (1998) (0)
- Methanol tolerant cathodes (2002) (0)
- Electrosynthesis of alpha-Hydroxy Acids (1997) (0)
- Rate Processes and Reaction Models (1995) (0)
- Development of a single chamber microbial fuel cell as biosensor of the organic content in wastewaters (2008) (0)
- Progress in The Development of Alkaline Membrane Fuel Cells and Regenerative Fuel Cells (2013) (0)
- A study on the performance of the lead air battery (2017) (0)
- An Investigation of PalladiumOxygen Reduction Catalysts for the Direct Methanol Fuel Cell (2014) (0)
- Anode partial fl ooding modelling of proton exchange membrane fuel cells : Model development and validation (2016) (0)
- Application of process intensification to water electrolysis (1999) (0)
- AGraphite Oxide Paper Polymer Electrolyte for Direct Methanol Fuel Cells (2014) (0)
- Methanol Crossover Aspects of Materials for Direct Methanol Fuel Cells (2000) (0)
- Separation of Chromium Ions through supported Liquid Membranes and Membrane Reactors (2008) (0)
- A comment on the mechanism of anodic chlorate formation (1987) (0)
- Regulation of Power Conversion in Fuel Cells (2004) (0)
- Secondary Impact of Manganese on Catalytic Property of N- Doped Graphene in the Hydrogen Evolution Reaction (2020) (0)
- Advances in Microbial Fuel Cells through Cathode, Anode and Membrane Development (2008) (0)
- UV absorption by nitrophenols:Implications for design of photocatalytic and photoelectrocatalytic reactors. (2004) (0)
- A Model for the Electrochemical Formation of Bromate (1995) (0)
- Chapter 4. Metal Recovery Using Microbial Electrochemical Technologies (2019) (0)
- Section 13 - Waste water treatment and liquid membranes (1995) (0)
- A parametric study of the cathode catalystlayer composition based on a two-dimensional two-phase flow agglomerate model (2013) (0)
- A Review of Progress in the UK Supergen Fuel Cell Programme (2009) (0)
- Espiritu R, Mamlouk M, Scott K. Study on the Effect of the Degree of Grafting on the Performance of Polyethylene-based Anion Exchange Membrane for Fuel (2015) (0)
- Section 10 - Water purification (1998) (0)
- Lithium Air Rechargable Battery Challenges to Sustained Cycling (2013) (0)
- An Experimental Preparation of Fuel Cell Quaternary Polyvinyl Benzyl Chloride (qPVBCl) Alkaline Anion Exchange Membrane and Investigation of its Conductivity Characteristics (2017) (0)
- Methanol tolerant cathodes for undivided fuel cells (2002) (0)
- A Model of a Phase Transfer Catalyst Liquid/Liquid Electrochemical Membrane Reactor (1995) (0)
- A comparison of methods for fabricating ruthenium-based methanol tolerant cathode catalysts for direct methanol fuel cells (2007) (0)
- Catalytic cathode nanomaterials for rechargeable lithium–air batteries: status and challenges (2015) (0)
- Cathodes for mixed reactant fuel cells (2005) (0)
- Electrochemical characterisation of Ruthenium charcolgenides for direct methanol fuel cells (2008) (0)
- Design and operation of direct borohydride fuel cells (2005) (0)
- Novel bifunctional catalytic nano-materials for rechargeable Li-air batteries (2013) (0)
- Glucose Oxidation on Enzyme immobilised Gold Electrodes prepared by Electrodeposition (2006) (0)
- Enhancement of mass transfer in a centrifugal field: modelling and experiments (2003) (0)
- Hydrogen Production and Water Electrolysis (2017) (0)
- Polyaniline on Stainless Steel Fiber Felt as Anodes for Bioelectrodegradation of Acid Blue 29 in Microbial Fuel Cells (2022) (0)
- Hydrodynamic Effect on Electrochemistry in Micellar Media (1995) (0)
- Catalytic Activity of Au/MWNTs Nanocomposite on Oxygen Reduction Reaction and Application on Li-O2 Batteries (2016) (0)
- Kinetics, Mass Transport Characteristics and Model of the Direct Methanol Fuel Cell Anode (1999) (0)
- Catalytic Oxidation of Alkyl Aromatics Using a Novel Silica Supported Schiff Base Complex. (1999) (0)
- Investigation of electrode and membrane materials for direct borohydride fuel cells (2005) (0)
- Section 15 - Medical applications (1998) (0)
- Principles and Applications of Solid Polymer Electrolyte Reactors for Electrochemical Hydrodehalogenation of Organic Pollutants (2010) (0)
- Power production enhancement by using novel mediators in a microbial fuel cell (2008) (0)
- Electrochemical reduction of oxygen on ruthenium-selenium-transition metal catalysts (2007) (0)
- Photoelectrochemical detoxification and disinfection of water using a novel bubble column reactor (2002) (0)
- Cost Estimation, Profit Appraisal, Process Modeling, and Optimization (1995) (0)
- Highly-efficient formate production from CO2 electrochemical reduction and its direct application in formate fuel cell (2019) (0)
- Electrochemical Methods for the Treatment of Industrial Process Streams and Effluents: Part II: Electrochemical-Based Methods for the Treatment of Flue Gases, and Aqueous Streams Containing Organic and Inorganic Chemicals (2008) (0)
- Improvements in Li Air Batteries through Electrocatalysts, Electrode Structure Design and Modelling (2014) (0)
- Section 6 - Separation of organic vapour/air mixtures (1995) (0)
- Nanoporous Substrate materials for Rechargeable Li-Air Batteries (2012) (0)
- Operation of Direct Methanol Fuel Cell in a Centrifugal Field (2003) (0)
- Ghadge AN, Ghangrekar M, Scott K. Maximum anode chamber volume and minimum anode area for supporting electrogenesis in microbial fuel cells treating wastewater. Journal of Renewable and Sustainable Energy 2016, 8, 044302 (2016) (0)
- A Gas/Liquid Sieve Plate Reactor for Electrochemical Recovery of Sulphur Dioxide (1999) (0)
- Carbon and Boron Platinum / carbon / polyaniline based nanocomposites as catalysts for fuel cell technology (2006) (0)
- arbon-supported manganese oxide nanocatalysts for rechargeable lithium – air atteries (2009) (0)
- Catalytic and Stability Performance of the Electrode and Electrolyte in Na-O2 Batteries: Electrochemical Insight (2020) (0)
- Section 9 - Water desalination (1998) (0)
- Electrochemical Recycling of Halogenated Phenols (2001) (0)
- Design and Analysis of HT-PEMFC Systems with Different Fuel Processors for Stationary Applications (2012) (0)
- Development of a single chamber microbial fuel cell as BOD sensor (2008) (0)
- Section 19 - Electrokinetic separations (1998) (0)
- Highly Active Nitrogen-Doped Carbon Metal Oxide Hybrid Composites for Oxygen Reduction Reaction (2015) (0)
- Approximate analytical design procedures for plug flow electrochemical reactors (1989) (0)
- Espiritu R, Golding BT, Scott K, Mamlouk M. Degradation of radiation grafted anion exchange membranes tethered with different amine functional groups (2017) (0)
- Membrane Materials for PEM Electrolysers (2010) (0)
- Direct Methanol Polymer Electrolyte Fuel Cell: Model-based Analysis and Experimental Validation (1998) (0)
- OXIDATION OF METHANOL IN ALKALINE SOLUTIONS (2002) (0)
- A DIRECT ETHANOL FUEL CELL OPERATING AT INTERMEDIATE TEMPERATURE (100-200 O C) (2010) (0)
- Alcohol tolerant cathode catalysts for direct alcohol fuel cells (2006) (0)
- Nb 1 L x O 2 catalyst for the oxygen evolution reaction in proton exchange membrane water electrolysers (2013) (0)
- Performance of the anode compartment when treating complex wastewaters (2008) (0)
- A study on the flow field design of lead flow batteries (2017) (0)
- Selection of anode materials for direct borohydride fuel cells (2005) (0)
- Electrochemistry in Micellar Media (1995) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Keith Scott Keith Scott?
Keith Scott Keith Scott is affiliated with the following schools: