Krist V. Gernaey

Q: What Schools Are Affiliated With Krist V. Gernaey

Krist V. Gernaey is affiliated with the following schools: Polytechnic University of Milan, Technical University of Denmark, Ghent University

Krist V. Gernaey's AcademicInfluence.com Rankings

Krist V. Gernaey

Chemistry

#3274

World Rank

#4280

Historical Rank

Chemical Engineering

#366

World Rank

#381

Historical Rank

chemistry Degrees

Download Badge

Chemistry

Krist V. Gernaey's Degrees

PhD Chemical Engineering Technical University of Denmark
Masters Chemical Engineering Technical University of Denmark
Bachelors Chemical Engineering Technical University of Denmark

Why Is Krist V. Gernaey Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Krist V. Gernaey's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Activated sludge wastewater treatment plant modelling and simulation: state of the art (2004) (502)
Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review (2015) (297)
Benchmark simulation model no 2: general protocol and exploratory case studies. (2007) (256)
Benchmark Simulation Model no. 1 (BSM1) (2008) (234)
Nitrification monitoring in activated sludge by oxygen uptake rate (OUR) measurements. (1996) (211)
Benchmarking of Control Strategies for Wastewater Treatment Plants (2014) (210)
Good modeling practice for PAT applications: Propagation of input uncertainty and sensitivity analysis (2009) (195)
Process analytical technology (PAT) for biopharmaceuticals (2011) (190)
Benchmark Simulation Model No 2: finalisation of plant layout and default control strategy. (2010) (189)
Soft sensors in bioprocessing: a status report and recommendations. (2012) (181)
Microscale technology and biocatalytic processes: opportunities and challenges for synthesis. (2015) (163)
Uncertainty analysis in WWTP model applications: a critical discussion using an example from design. (2009) (162)
Application of microbioreactors in fermentation process development: a review (2009) (161)
Application of near‐infrared spectroscopy for monitoring and control of cell culture and fermentation (2009) (158)
Towards a benchmark simulation model for plant-wide control strategy performance evaluation of WWTPs. (2006) (156)
Multienzyme-Catalyzed Processes: Next-Generation Biocatalysis (2011) (153)
Evaluation of an ASM1 model calibration procedure on a municipal-industrial wastewater treatment plant (2002) (148)
Global sensitivity analysis in wastewater treatment plant model applications: prioritizing sources of uncertainty. (2011) (147)
Modelling nitrite in wastewater treatment systems: a discussion of different modelling concepts. (2008) (141)
Implementing ADM1 for plant-wide benchmark simulations in Matlab/Simulink. (2006) (132)
A perspective on PSE in pharmaceutical process development and innovation (2012) (130)
Dynamic influent pollutant disturbance scenario generation using a phenomenological modelling approach (2011) (129)
Artificial neural networks for rapid WWTP performance evaluation: Methodology and case study (2007) (126)
Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty. (2008) (122)
Experimental methods and modeling techniques for description of cell population heterogeneity. (2011) (120)
A review of control strategies for manipulating the feed rate in fed-batch fermentation processes. (2017) (116)
Model-based analysis of high shear wet granulation from batch to continuous processes in pharmaceutical production--a critical review. (2013) (107)
A model-based systems approach to pharmaceutical product-process design and analysis (2010) (104)
Balancing effluent quality, economic cost and greenhouse gas emissions during the evaluation of (plant-wide) control/operational strategies in WWTPs. (2014) (104)
Biorefining: Computer aided tools for sustainable design and analysis of bioethanol production (2009) (102)
Application of mechanistic models to fermentation and biocatalysis for next-generation processes. (2010) (101)
Calibration of Activated Sludge Models: A Critical Review of Experimental Designs (2003) (99)
Benchmarking combined biological phosphorus and nitrogen removal wastewater treatment processes (2004) (97)
Transient response of aerobic and anoxic activated sludge activities to sudden substrate concentration changes (2004) (97)
Risk assessment modelling of microbiology-related solids separation problems in activated sludge systems (2008) (97)
Practical identifiability of model parameters by combined respirometric-titrimetric measurements. (2001) (96)
Mixing and transport during pharmaceutical twin-screw wet granulation: experimental analysis via chemical imaging. (2014) (93)
Modelling phosphorus (P), sulfur (S) and iron (Fe) interactions for dynamic simulations of anaerobic digestion processes. (2016) (93)
Resource recovery from organic solid waste using hydrothermal processing: Opportunities and challenges (2018) (92)
New framework for standardized notation in wastewater treatment modelling. (2010) (92)
On-line estimation of biomass, glucose and ethanol in Saccharomyces cerevisiae cultivations using in-situ multi-wavelength fluorescence and software sensors. (2009) (91)
Wastewater treatment modelling: dealing with uncertainties. (2009) (87)
Model-based computer-aided framework for design of process monitoring and analysis systems (2009) (85)
Fast and sensitive acute toxicity detection with an enrichment nitrifying culture (1997) (85)
Assessing reliability of cellulose hydrolysis models to support biofuel process design - Identifiability and uncertainty analysis (2010) (85)
Instrumentation, control and automation in wastewater--from London 1973 to Narbonne 2013. (2014) (76)
Plant-wide modelling of phosphorus transformations in wastewater treatment systems: Impacts of control and operational strategies. (2017) (75)
Challenges in industrial fermentation technology research. (2014) (75)
Physiological heterogeneities in microbial populations and implications for physical stress tolerance (2012) (74)
A plant-wide aqueous phase chemistry module describing pH variations and ion speciation/pairing in wastewater treatment process models. (2015) (71)
A Mathematical Model for Simultaneous Saccharification and Co-fermentation (SSCF) of C6 and C5 Sugars (2011) (71)
Advances in the Process Development of Biocatalytic Processes (2013) (71)
WWTP dynamic disturbance modelling--an essential module for long-term benchmarking development. (2006) (70)
Mechanistic modelling of fluidized bed drying processes of wet porous granules: a review. (2011) (66)
Plant-wide model-based analysis of iron dosage strategies for chemical phosphorus removal in wastewater treatment systems. (2019) (66)
A systematic methodology for design of tailor-made blended products (2014) (66)
Effects of ionic strength and ion pairing on (plant-wide) modelling of anaerobic digestion. (2015) (65)
Continuous Hydrolysis and Liquid–Liquid Phase Separation of an Active Pharmaceutical Ingredient Intermediate Using a Miniscale Hydrophobic Membrane Separator (2012) (65)
A framework for model-based optimization of bioprocesses under uncertainty: Lignocellulosic ethanol production case (2012) (63)
Sensitivity analysis of autotrophic N removal by a granule based bioreactor: Influence of mass transfer versus microbial kinetics. (2012) (63)
Benchmark simulation models, quo vadis? (2013) (61)
Active pharmaceutical ingredient (API) production involving continuous processes--a process system engineering (PSE)-assisted design framework. (2012) (60)
Mixing and mass transfer in a pilot scale U‐loop bioreactor (2017) (60)
A simplified method to assess structurally identifiable parameters in Monod-based activated sludge models. (2003) (60)
Mechanistic Fermentation Models for Process Design, Monitoring, and Control. (2017) (59)
Development of a single-use microbioreactor for cultivation of microorganisms (2010) (55)
ICAS-PAT: A software for design, analysis and validation of PAT systems (2010) (55)
Dynamic model-based evaluation of process configurations for integrated operation of hydrolysis and co-fermentation for bioethanol production from lignocellulose. (2011) (54)
Matrix notation for efficient development of first‐principles models within PAT applications: Integrated modeling of antibiotic production with Streptomyces coelicolor (2008) (54)
Modelling of coupled heat and mass transfer during a contact baking process (2011) (53)
3D modelling of coupled mass and heat transfer of a convection-oven roasting process. (2013) (53)
Modeling aerobic carbon source degradation processes using titrimetric data and combined respirometric–titrimetric data: Experimental data and model structure (2002) (52)
Screening of organic solvents for bioprocesses using aqueous-organic two-phase systems. (2018) (51)
In situ near infrared spectroscopy for analyte‐specific monitoring of glucose and ammonium in streptomyces coelicolor fermentations (2010) (51)
Linking granulation performance with residence time and granulation liquid distributions in twin-screw granulation: An experimental investigation. (2016) (51)
An ontological knowledge-based system for the selection of process monitoring and analysis tools (2010) (51)
Measurement of ammonium concentration and nitrification rate by a new titrimetric biosensor (1998) (51)
An exploration of barriers for commercializing phosphorus recovery technologies (2019) (50)
Monitoring and Control of a Continuous Grignard Reaction for the Synthesis of an Active Pharmaceutical Ingredient Intermediate Using Inline NIR spectroscopy (2012) (49)
ON-LINE ESTIMATION OF NITROSOMONAS KINETIC PARAMETERS IN ACTIVATED SLUDGE SAMPLES USING TITRATION IN-SENSOR-EXPERIMENTS (1998) (49)
Conceptual framework for model-based analysis of residence time distribution in twin-screw granulation. (2015) (49)
Evaluation of mixing and mass transfer in a stirred pilot scale bioreactor utilizing CFD (2017) (49)
Benchmark simulation Model no 2 in Matlab-simulink: towards plant-wide WWTP control strategy evaluation. (2006) (48)
Effect of Market Price Uncertainties on the Design of Optimal Biorefinery Systems—A Systematic Approach (2014) (47)
Impact of reactive settler models on simulated WWTP performance. (2006) (47)
Uncertainty analysis as essential step in the establishment of the dynamic Design Space of primary drying during freeze-drying. (2016) (47)
Data Handling and Parameter Estimation (2016) (45)
Exploring the effects of ZVI addition on resource recovery in the anaerobic digestion process (2018) (45)
Towards smart biomanufacturing: a perspective on recent developments in industrial measurement and monitoring technologies for bio-based production processes (2020) (45)
Modeling enzyme production with Aspergillus oryzae in pilot scale vessels with different agitation, aeration, and agitator types (2011) (45)
Upgrading of lignocellulosic biorefinery to value-added chemicals: Sustainability and economics of bioethanol-derivatives (2015) (45)
OPTIMIZATION OF WASTEWATER TREATMENT PLANT DESIGN AND OPERATION USING SIMULATION AND COST ANALYSIS (2000) (44)
Benchmarking biological nutrient removal in wastewater treatment plants: influence of mathematical model assumptions. (2012) (43)
Modelling the occurrence, transport and fate of pharmaceuticals in wastewater systems (2014) (43)
Multivariate models for prediction of rheological characteristics of filamentous fermentation broth from the size distribution (2008) (43)
Application of modeling and simulation tools for the evaluation of biocatalytic processes: A future perspective (2009) (43)
On-line nitrification monitoring in activated sludge with a titrimetric sensor. (1997) (43)
Calibration and validation of a phenomenological influent pollutant disturbance scenario generator using full-scale data. (2014) (42)
Fungal Morphology in Industrial Enzyme Production--Modelling and Monitoring. (2015) (42)
Modeling aerobic carbon source degradation processes using titrimetric data and combined respirometric–titrimetric data: Structural and practical identifiability (2002) (41)
Improving the Morris method for sensitivity analysis by scaling the elementary effects (2009) (41)
A model-based methodology for simultaneous design and control of a bioethanol production process (2010) (41)
Organic and ammonium nitrogen and oxygen in relation to granular sludge growth in lab-scale UASB reactors (1994) (40)
A continuous membrane microbioreactor system for development of integrated pectin modification and separation processes (2011) (40)
Limitations of Short-Term Experiments Designed for Identification of Activated Sludge Biodegradation Models by Fast Dynamic Phenomena (1998) (39)
Moisture and drug solid-state monitoring during a continuous drying process using empirical and mass balance models. (2014) (39)
New sensor based on pH effect of denitrification process (1997) (38)
Occurrence, characterisation and fate of (nano)particulate Ti and Ag in two Norwegian wastewater treatment plants. (2018) (38)
Meta-modeling based efficient global sensitivity analysis for wastewater treatment plants - An application to the BSM2 model (2019) (38)
Uncertainty and sensitivity analysis: Mathematical model of coupled heat and mass transfer for a contact baking process (2012) (37)
Development of a process map: A step towards a regime map for steady-state high shear wet twin screw granulation (2016) (37)
Including the effects of filamentous bulking sludge during the simulation of wastewater treatment plants using a risk assessment model. (2009) (36)
A generic multi-dimensional model-based system for batch cooling crystallization processes (2011) (36)
Phenomenological modelling of wastewater treatment plant influent disturbance scenarios (2005) (36)
Economic Risk Assessment of Early Stage Designs for Glycerol Valorization in Biorefinery Concepts (2016) (35)
Resource recovery from bio-based production processes: a future necessity? (2017) (35)
Monitoring and control of microbioreactors: an expert opinion on development needs. (2012) (35)
Economic risk analysis and critical comparison of optimal biorefinery concepts (2016) (35)
Configuration optimization of series flow double-effect water-lithium bromide absorption refrigeration systems by cost minimization (2018) (35)
Experimental investigation of granule size and shape dynamics in twin-screw granulation. (2014) (35)
"Connecting worlds - a view on microfluidics for a wider application". (2018) (34)
A mathematical programming framework for early stage design of wastewater treatment plants (2015) (34)
Modeling of a reactive primary clarifier. (2001) (34)
Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design (2015) (33)
Optimal WWTP process selection for treatment of domestic wastewater – A realistic full-scale retrofitting study (2016) (33)
Modelling and control strategy testing of biological and chemical phosphorus removal at Avedøre WWTP. (2006) (33)
Experimental and in silico investigation of population heterogeneity in continuous Sachharomyces cerevisiae scale‐down fermentation in a two‐compartment setup (2015) (33)
The electrical breakdown of thin dielectric elastomers: thermal effects (2014) (33)
Understanding gradients in industrial bioreactors. (2020) (33)
The Role of Big Data in Industrial (Bio)chemical Process Operations (2020) (32)
Cell mass and cell cycle dynamics of an asynchronous budding yeast population: Experimental observations, flow cytometry data analysis, and multi‐scale modeling (2013) (32)
Anoxic activated sludge monitoring with combined nitrate and titrimetric measurements. (2002) (32)
Mechanistic modelling of the drying behaviour of single pharmaceutical granules. (2012) (32)
Evaluation of an ASM 1 model calibration procedure on a municipal – industrial wastewater treatment plant (2002) (32)
Gassed and ungassed power draw in a pilot scale 550 litre fermentor retrofitted with up-pumping hydrofoil B2 impellers in media of different viscosity and with very high power draw (2008) (32)
Model-based analysis of a twin-screw wet granulation system for continuous solid dosage manufacturing (2016) (31)
Influence of selecting secondary settling tank sub-models on the calibration of WWTP models - A global sensitivity analysis using BSM2 (2014) (31)
Resource recovery from waste streams in a water-energy-food nexus perspective: Toward more sustainable food processing (2020) (31)
Assessing the environmental sustainability of early stage design for bioprocesses under uncertainties: An analysis of glycerol bioconversion (2016) (31)
A Genome-Scale Metabolic Model for Methylococcus capsulatus (Bath) Suggests Reduced Efficiency Electron Transfer to the Particulate Methane Monooxygenase (2018) (31)
Population balance models: a useful complementary modelling framework for future WWTP modelling. (2015) (31)
Effect of nitrite, limited reactive settler and plant design configuration on the predicted performance of simultaneous C/N/P removal WWTPs. (2013) (30)
A framework for techno-economic & environmental sustainability analysis by risk assessment for conceptual process evaluation (2016) (30)
Sustainable bio-succinic acid production: superstructure optimization, techno-economic, and lifecycle assessment (2021) (29)
Nitrification Process Control in Activated Sludge Using Oxygen Uptake Rate Measurements (1995) (29)
Plant-wide (BSM2) evaluation of reject water treatment with a SHARON-Anammox process. (2006) (29)
Topology optimized microbioreactors (2011) (29)
Biosensors for nitrogen control in wastewaters. (1996) (29)
Understanding N2O formation mechanisms through sensitivity analyses using a plant-wide benchmark simulation model (2017) (28)
Dynamic modelling of pectin extraction describing yield and functional characteristics (2017) (28)
Catchment & sewer network simulation model to benchmark control strategies within urban wastewater systems (2016) (28)
Integrated modelling of two xenobiotic organic compounds. (2006) (28)
Output uncertainty of dynamic growth models: Effect of uncertain parameter estimates on model reliability (2019) (27)
Applying mechanistic models in bioprocess development. (2013) (27)
Towards a digital twin: a hybrid data‐driven and mechanistic digital shadow to forecast the evolution of lignocellulosic fermentation (2020) (27)
Quantitative risk assessment via uncertainty analysis in combination with error propagation for the determination of the dynamic Design Space of the primary drying step during freeze‐drying (2017) (27)
Extension of the IWA/COST simulation benchmark to include expert reasoning for system performance evaluation. (2006) (26)
Calibration and validation of a model describing complete autotrophic nitrogen removal in a granular SBR system (2013) (26)
Modelling an industrial anaerobic granular reactor using a multi-scale approach. (2017) (26)
Introducing process analytical technology (PAT) in filamentous cultivation process development: comparison of advanced online sensors for biomass measurement (2011) (26)
Mechanisms, status, and challenges of thermal hydrolysis and advanced thermal hydrolysis processes in sewage sludge treatment. (2021) (26)
Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model No1 (BSM1). (2009) (25)
Control of wastewater N2O emissions by balancing the microbial communities using a fuzzy-logic approach (2016) (25)
From second generation feed-stocks to innovative fermentation and downstream techniques for succinic acid production (2020) (25)
Sensor combination and chemometric variable selection for online monitoring of Streptomyces coelicolor fed-batch cultivations (2010) (25)
A CFD based automatic method for compartment model development (2019) (25)
Challenges encountered when expanding activated sludge models: a case study based on N2O production. (2014) (25)
Digital Twin in biomanufacturing: challenges and opportunities towards its implementation (2021) (25)
An Industrial Perspective on Scale-Down Challenges Using Miniaturized Bioreactors. (2019) (24)
Organic carbon recovery modeling for a rotating belt filter and its impact assessment on a plant-wide scale (2018) (24)
Evaluation of the energy efficiency of enzyme fermentation by mechanistic modeling (2012) (24)
Aeration control by monitoring the microbiological activity using fuzzy logic diagnosis and control. Application to a complete autotrophic nitrogen removal reactor (2015) (24)
A systematic framework for design of process monitoring and control (PAT) systems for crystallization processes (2013) (23)
Control structure design for resource recovery using the enhanced biological phosphorus removal and recovery (EBP2R) activated sludge process (2016) (23)
CFD predicted pH gradients in lactic acid bacteria cultivations (2018) (23)
Perspectives on Resource Recovery from Bio-Based Production Processes: From Concept to Implementation (2017) (23)
Embedded resistance wire as a heating element for temperature control in microbioreactors (2010) (23)
NLP modeling for the optimization of LiBr-H2O absorption refrigeration systems with exergy loss rate, heat transfer area, and cost as single objective functions (2016) (22)
Performance analysis of a denitrifying wastewater treatment plant (2002) (22)
Optimisation of wastewater treatment plant design and operation using simulation and cost analysis (1999) (21)
Sensors to monitor biological nitrogen removal and activated sludge settling (1998) (21)
Hybrid machine learning assisted modelling framework for particle processes (2020) (21)
A model library for simulation and benchmarking of integrated urban wastewater systems (2017) (21)
Microreactors and CFD as Tools for Biocatalysis Reactor Design: A case study (2013) (21)
A flexible well-mixed milliliter-scale reactor with high oxygen transfer rate for microbial cultivations (2016) (21)
Quantitative Flow Cytometry to Understand Population Heterogeneity in Response to Changes in Substrate Availability in Escherichia coli and Saccharomyces cerevisiae Chemostats (2019) (21)
Development of in situ product removal strategies in biocatalysis applying scaled‐down unit operations (2017) (20)
Development of continuous pharmaceutical production processes supported by process systems engineering methods and tools. (2012) (20)
Lab on a chip automates in vitro cell culturing (2012) (20)
Comparison of laser diffraction and image analysis for measurement of Streptomyces coelicolor cell clumps and pellets (2012) (20)
A probabilistic model-based soft sensor to monitor lactic acid bacteria fermentations (2018) (20)
Toward a Computer-Aided Synthesis and Design of Biorefinery Networks: Data Collection and Management Using a Generic Modeling Approach (2014) (20)
Computer aided model analysis and dynamic simulation of a wastewater treatment plant (2002) (20)
Evaluation of an in-line particle imaging tool for monitoring twin-screw granulation performance (2015) (19)
CONTROL STRATEGY EVALUATION FOR COMBINED N AND P REMOVAL USING A BENCHMARK WASTEWATER TREATMENT PLANT (2002) (19)
A Systematic Methodology for Comprehensive Economic Assessment of Process Control Structures (2018) (19)
Mechanistic modeling of cyclic voltammetry: A helpful tool for understanding biosensor principles and supporting design optimization (2018) (19)
Development of dynamic compartment models for industrial aerobic fed-batch fermentation processes (2021) (19)
Optimal Design and Planning of Glycerol-Based Biorefinery Supply Chains under Uncertainty (2017) (19)
Resource recovery from bio-based production processes in developing Asia (2019) (19)
A new pH-based procedure to model toxic effects on nitrifiers in activated sludge. (1999) (19)
Alone or together? A review on pure and mixed microbial cultures for butanol production (2021) (19)
Investigation of the cleaning of egg yolk deposits from tank surfaces using continuous and pulsed flows (2019) (18)
Transforming data to information: A parallel hybrid model for real‐time state estimation in lignocellulosic ethanol fermentation (2020) (18)
Improved theoretical identifiability of model parameters by combined respirometric - titrimetric measurements. A generalisation of results. (2000) (18)
Process Intensification Tools in the Small‐Scale Pharmaceutical Manufacturing of Small Molecules (2015) (18)
Development of novel control strategies for single-stage autotrophic nitrogen removal: A process oriented approach (2014) (18)
Integrated Process Design and Control of Cyclic Distillation Columns (2018) (18)
Benchmarking real-time monitoring strategies for ethanol production from lignocellulosic biomass (2019) (17)
Assessment of sludge management strategies in wastewater treatment systems using a plant-wide approach. (2020) (17)
Ammonium concentration measurements using a titrometric biosensor (1995) (17)
Automated Electrochemical Glucose Biosensor Platform as an Efficient Tool Toward On-Line Fermentation Monitoring: Novel Application Approaches and Insights (2020) (17)
A novel fuzzy-logic control strategy minimizing N2O emissions. (2017) (17)
A generic model-based methodology for quantification of mass transfer limitations in microreactors (2016) (17)
A novel use for an old problem: The Tennessee Eastman challenge process as an activating teaching tool (2020) (16)
Sensors for biosensors: a novel tandem monitoring in a droplet towards efficient screening of robust design and optimal operating conditions. (2019) (16)
Implementing ADM1 for benchmark simulations in Matlab/Simulink (2005) (16)
Long-term operation assessment of a full-scale membrane-aerated biofilm reactor under Nordic conditions. (2021) (16)
Liquid‐to‐solid ratio control as an advanced process control solution for continuous twin‐screw wet granulation (2018) (16)
A new extant respirometric assay to estimate intrinsic growth parameters applied to study plasmid metabolic burden (2010) (16)
Hypothesis-driven compartment model for stirred bioreactors utilizing computational fluid dynamics and multiple pH sensors (2019) (16)
ON-LINE ESTIMATION AND DETECTION OF ABNORMAL SUBSTRATE CONCENTRATIONS IN WWTPS USING A SOFTWARE SENSOR: A BENCHMARK STUDY (2007) (16)
Generation of synthetic influent data to perform (micro)pollutant wastewater treatment modelling studies. (2016) (16)
Effects of influent fractionation, kinetics, stoichiometry and mass transfer on CH4, H2 and CO2 production for (plant-wide) modeling of anaerobic digesters. (2015) (15)
A novel control strategy for single-stage autotrophic nitrogen removal in SBR (2015) (15)
Towards one-step design of tailored enzymatic nanobiosensors. (2019) (15)
An integrated strategy for the effective production of bristle protein hydrolysate by the keratinolytic filamentous bacterium Amycolatopsis keratiniphila D2. (2019) (15)
Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes. (2013) (15)
Towards the Development of Digital Twins for the Bio-manufacturing Industry. (2020) (15)
pH variation and influence in an autotrophic nitrogen removing biofilm system using an efficient numerical solution strategy. (2013) (15)
Evaluation of plant-wide WWTP control strategies including the effects of filamentous bulking sludge. (2009) (15)
Analysing drying unit performance in a continuous pharmaceutical manufacturing line by means of mass--energy balances. (2014) (15)
Systematic substrate adoption methodology (SAM) for future flexible, generic pharmaceutical production processes (2013) (15)
Demonstration of a tool for automatic learning and re-use of knowledge in the activated sludge process. (2006) (14)
Application of a mechanistic model as a tool for on‐line monitoring of pilot scale filamentous fungal fermentation processes—The importance of evaporation effects (2017) (14)
Application of Organic-Inorganic Hybrids in Chemical Analysis, Bio- and Environmental Monitoring (2020) (14)
Biocatalytic process development using microfluidic miniaturized systems (2014) (14)
A novel model‐based control strategy for aerobic filamentous fungal fed‐batch fermentation processes (2017) (14)
Towards BSM2-GPS-X: A plant-wide benchmark simulation model not only for carbon and nitrogen, but also for greenhouse gases (G), phosphorus (P), sulphur (S) and micropollutants (X), all within the fence of WWTPs/WRRFs (2014) (14)
Incremental design of water symbiosis networks with prior knowledge: The case of an industrial park in Kenya. (2021) (14)
CFD modelling of axial mixing in the intermediate and final rinses of cleaning-in-place procedures of straight pipes (2018) (14)
Experimental and computational evaluation of area selectively immobilized horseradish peroxidase in a microfluidic device (2018) (14)
Why Is Batch Processing Still Dominating the Biologics Landscape? Towards an Integrated Continuous Bioprocessing Alternative (2020) (13)
A compartment model for risk-based monitoring of lactic acid bacteria cultivations (2019) (13)
Model‐based analysis and optimization of a full‐scale industrial high‐rate anaerobic bioreactor (2018) (13)
Wastewater Treatment Models (2008) (13)
Dynamic Plantwide Modeling, Uncertainty, and Sensitivity Analysis of a Pharmaceutical Upstream Synthesis: Ibuprofen Case Study (2018) (13)
Shape optimization as a tool to design biocatalytic microreactors (2017) (13)
Flow-following sensor devices: A tool for bridging data and model predictions in large-scale fermentations (2020) (13)
A titration technique for on-line nitrificiation monitoring in activated sludge (1997) (13)
Systematic design of membership functions for fuzzy-logic control: A case study on one-stage partial nitritation/anammox treatment systems. (2016) (13)
An Integrated Methodology for Design of Tailor-Made Blended Products (2012) (13)
Stochastic simulation-based superstructure optimization framework for process synthesis and design under uncertainty (2020) (12)
Techno-economic and environmental impact assessment of biogas production and fertiliser recovery from pelagic Sargassum: A biorefinery concept for Barbados (2021) (12)
Model of Heat and Mass Transfer with Moving Boundary During Roasting of Meat in Convection-Oven (2009) (12)
Functional unfold principal component regression methodology for analysis of industrial batch process data (2016) (12)
Instrumentation and control in anaerobic digestion (2004) (12)
Development of a Population Balance Model of a pharmaceutical drying process and testing of solution methods (2013) (11)
Design of Sustainable Blended Products using an Integrated Methodology (2013) (11)
Assessing the effects of intra-granule precipitation in a full-scale industrial anaerobic digester. (2019) (11)
A retrofit strategy to achieve “Fast, Flexible, Future (F3)” pharmaceutical production processes (2011) (11)
Model-based analysis of biocatalytic processes and performance of microbioreactors with integrated optical sensors. (2019) (11)
Application of iterative robust model‐based optimal experimental design for the calibration of biocatalytic models (2017) (11)
Distinguishing Commercial Beers Using a Solution-Based Sensor Array Derived from Nanoscale Polydiacetylene Vesicles (2020) (11)
Sensors for nitrogen removal monitoring in wastewater treatment (1998) (10)
Global sensitivity analysis applied to drying models for one or a population of granules (2014) (10)
Optimal Design of Algae Biorefinery Processing Networks for the production of Protein, Ethanol and Biodiesel (2015) (10)
Towards understanding the role and function of regulatory networks in microorganisms (2006) (10)
A dynamic modelling approach to evaluate GHG emissions from wastewater treatment plants (2012) (10)
A titration technique for on-line nitrification monitoring in activated sludge (1998) (10)
Cleaning of toothpaste from vessel walls by impinging liquid jets and their falling films: Quantitative modelling of soaking effects (2019) (10)
Exploring the potential of electroless and electroplated noble metal-semiconductor hybrids within bio- and environmental sensing. (2018) (10)
Evaluation of anaerobic digestion post-treatment options using an integrated model-based approach. (2019) (10)
Computational Fluid Dynamics modelling of hydrodynamics, mixing and oxygen transfer in industrial bioreactors with Newtonian broths (2021) (10)
Quo Vadis Benchmark Simulation Models (2011) (10)
Untargeted GC‐MS Metabolomics Reveals Changes in the Metabolite Dynamics of Industrial Scale Batch Fermentations of Streptoccoccus thermophilus Broth (2017) (10)
Developing a framework to model the primary drying step of a continuous freeze‐drying process based on infrared radiation (2018) (10)
Supply Chain Optimization of Integrated Glycerol Biorefinery: GlyThink Model Development and Application (2017) (10)
A process synthesis tool for WWTP – An application to design sustainable energy recovery facilities (2020) (10)
BSM2: A Model for Dynamic Influent Data Generation (2005) (9)
Global Sensitivity Analysis as Good Modelling Practices tool for the identification of the most influential process parameters of the primary drying step during freeze‐drying (2017) (9)
Introducing mechanistic models in Process Analytical Technology education. (2009) (9)
The Virtual Product-Process Design Laboratory for Structured Chemical Product Design and Analysis (2014) (9)
Analysis of the response of the cell membrane of Saccharomyces cerevisiae during the detoxification of common lignocellulosic inhibitors (2021) (9)
Application of multivariable statistical techniques in plant-wide WWTP control strategies analysis. (2007) (9)
Control of Process Operations and Monitoring of Product Qualities through Generic Model-based in Batch Cooling Crystallization (2010) (9)
Monitoring yeast fermentations by nonlinear infrared technology and chemometrics—understanding process correlations and indirect predictions (2020) (9)
Model-based characterisation of twin-screw granulation system for continuous solid dosage manufacturing (2015) (9)
Efficient modelling necessitates standards for model documentation and exchange. (2006) (9)
State Estimation in Fermentation of Lignocellulosic Ethanol. Focus on the Use of pH Measurements (2015) (9)
Reaction invariant-based reduction of the activated sludge model ASM1 for batch applications (2016) (9)
CFD Modeling of Flow and Ion Exchange Kinetics in a Rotating Bed Reactor System (2017) (8)
Microbial biofilms in biorefinery - Towards a sustainable production of low-value bulk chemicals and fuels. (2021) (8)
Multi-function microfluidic platform for sensor integration. (2018) (8)
A GLUE uncertainty analysis of a drying model of pharmaceutical granules. (2013) (8)
Topology optimization for biocatalytic microreactor configurations (2015) (8)
A framework for the development of Pedagogical Process Simulators (P2Si) using explanatory models and gamification (2021) (8)
Towards Digitalization in Bio-Manufacturing Operations: A Survey on Application of Big Data and Digital Twin Concepts in Denmark (2021) (8)
Efficient Computational Design of a Scaffold for Cartilage Cell Regeneration (2018) (8)
Extending the benchmark simulation model n°2 with processes for nitrous oxide production and side-stream nitrogen removal (2015) (8)
A Microfluidic Toolbox for the Development of In-Situ Product Removal Strategies in Biocatalysis (2016) (8)
Synthesis, Design and Analysis of Downstream Separation in Bio-refinery Processes through a Group-Contribution Approach (2010) (8)
Improved Optimization-based Design of PID Controllers Using Exact Gradients (2015) (8)
Conservation principles suspended solids distribution modelling to support ATS introduction on a recirculating WWTP. (2004) (8)
Evaluation of the efficiency of alternative enzyme production technologies (2012) (8)
Integration of first-principle models and machine learning in a modeling framework: An application to flocculation (2021) (8)
Dynamic investigation and modeling of the nitrogen cometabolism in Methylococcus capsulatus ( Bath) (2019) (8)
Pressure Control in Distillation Columns: A Model-Based Analysis (2014) (8)
Promoting the co-utilisation of glucose and xylose in lignocellulosic ethanol fermentations using a data-driven feed-back controller (2020) (8)
ZVI Addition in Continuous Anaerobic Digestion Systems Dramatically Decreases P Recovery Potential: Dynamic Modelling (2017) (7)
Design of tailor-made chemical blend using a decomposition-based computer-aided approach (2011) (7)
Economic Risk Analysis and Critical Comparison of Biodiesel Production Systems (2018) (7)
Superstructure Development and Optimization under Uncertainty for Design and Retrofit of Municipal Wastewater Treatment Plants (2014) (7)
Investigation of the effect of uncertain growth kinetics on a CFD based model for the growth of S. cerevisiae in an industrial bioreactor (2018) (7)
Digital models in biotechnology: Towards multi-scale integration and implementation. (2022) (7)
Characterization of mixing performance in bioreactors using flow-following sensor devices (2021) (7)
Model-Based Cost Optimization of Double-Effect Water-Lithium Bromide Absorption Refrigeration Systems (2019) (7)
The effect of acetate on population heterogeneity in different cellular characteristics of Escherichia coli in aerobic batch cultures (2019) (7)
Mixing by rotary jet heads: Indications of the benefits of head rotation under turbulent and transitional flow conditions (2008) (7)
Classification and Diagnostic Output Prediction of Cancer Using Gene Expression Profiling and Supervised Machine Learning Algorithms (2008) (7)
Biocatalyst Screening with a Twist: Application of Oxygen Sensors Integrated in Microchannels for Screening Whole Cell Biocatalyst Variants (2018) (7)
Dynamic model validation and advanced polymer control for rotating belt filtration as primary treatment of domestic wastewaters (2020) (6)
A genome-scale metabolic model for Methylococcus capsulatus predicts reduced efficiency uphill electron transfer to pMMO (2018) (6)
Separation of succinic acid from fermentation broth: dielectric exclusion, Donnan effect and diffusion as the most influential mass transfer mechanisms (2021) (6)
BSM1 versus BSM1_LT: Is the Control Strategy Performance Ranking Maintained? (2007) (6)
Computer-aided Framework for Synthesis, Design and Retrofit of Wastewater Treatment Plants (2015) (6)
Application of dynamic models (ASM1) and simulation to minimize renovation costs of a municipal activated sludge wastewater treatment plant (2000) (6)
Novel strategies for predictive particle monitoring and control using advanced image analysis (2019) (6)
Integration of Computational Chemistry and Artificial Intelligence for Multi-scale Modeling of Bioprocesses (2020) (6)
Balancing effluent quality, economical cost and greenhouse gas emssions during the evaluation of plant-wide wastewater treatment control strategies (2012) (6)
Reverse osmosis for water purification and reuse in the biotechnological industry: Process design, operation and economic guidelines (2017) (6)
Biosensing activated sludge. (1999) (6)
Modelling continuous pharmaceutical and bio-based processes at plant-wide level: A roadmap towards efficient decision-making (2018) (6)
Reduction of a single granule drying model: An essential step in preparation of a population balance model with a continuous growth term (2013) (6)
Continuous Fermentation for Biopharmaceuticals (2017) (5)
A Perspective on PSE in Fermentation Process Development and Operation (2015) (5)
Are Mechanistic Cellulose-Hydrolysis Models Reliable for Use in Biofuel Process Design? – Identifiability and Sensitivity Analysis (2009) (5)
Co-cultivation of a novel Fusarium striatum strain and a xylose consuming Saccharomyces cerevisiae yields an efficient process for simultaneous detoxification and fermentation of lignocellulosic hydrolysates (2021) (5)
PAT tools for fermentation processes (2012) (5)
Particle-Scale Modeling to Understand Liquid Distribution in Twin-Screw Wet Granulation (2021) (5)
Benchmarking of control strategies (2014) (5)
Superstructure-based optimization tool for plant design and retrofitting (2017) (5)
Modeling and system identification of an unconventional bioreactor used for single cell protein production (2020) (5)
Sensitivity Analysis of a Kinetic Model Describing the Bi-enzymatic Synthesis of Lactobionic Acid (2010) (5)
A Methodology for Development of a Pedagogical Simulation Tool used in Fermentation Applications (2018) (5)
Implementation of Near-Infrared Spectroscopy for In-Line Monitoring of a Dehydration Reaction in a Tubular Laminar Reactor (2016) (5)
Comparison of techniques for reconstruction of a distribution from moments in the context of a pharmaceutical drying process (2014) (5)
Global sensitivity analysis of the BSM2 dynamic influent disturbance scenario generator. (2012) (5)
Modelling and simulation of a U-loop Reactor for Single Cell Protein Production (2016) (5)
Model-Based Tools for Pharmaceutical Manufacturing Processes (2020) (5)
Applications, benefits and challenges of flow chemistry (2013) (5)
Geometry optimization of a fibrous scaffold based on mathematical modelling and CFD simulation of a dynamic cell culture (2016) (5)
Process Systems Engineering, 5. Process Dynamics, Control, Monitoring, and Identification (2012) (4)
Process Analytical Technologies in Biopharmaceutical Process Development (2015) (4)
Adding Value to Bioethanol through a Purification Process Revamp (2017) (4)
Overview on Design Considerations for Development of Disposable Microbiorector Prototypes (2012) (4)
Systematic Methodology for Design of Tailor-Made Blended Products: Fuels and Other Blended Products (2014) (4)
Systematic identification of crystallization kinetics within a generic modelling framework (2012) (4)
CAPE methods and tools for systematic analysis of new chemical product design and development (2008) (4)
Model-based process development for a continuous lactic acid bacteria fermentation (2018) (4)
Mechanism of water transport in meat during the roasting process (2009) (4)
Anomaly Analysis in Cleaning-in-Place Operations of an Industrial Brewery Fermenter (2018) (4)
Synergistic optimization framework for the process synthesis and design of biorefineries (2021) (4)
Towards a plant-wide Benchmark Simulation Model with simultaneous nitrogen and phosphorus removal wastewater treatment processes (2012) (4)
Plant-wide (BSM2) evaluation of the effect of reject water treatment with a SHARON-Anammox process (2006) (4)
A Numerical Procedure for Model Identifiability Analysis Applied to Enzyme Kinetics (2015) (4)
Multi-scale modeling for prediction of distributed cellular properties in response to substrate spatial gradients in a continuously run microreactor (2012) (4)
A fast and simple method to estimate relative, hyphal tensile‐strength of filamentous fungi used to assess the effect of autophagy (2018) (4)
A comprehensive model calibration procedure for ASM1 (2001) (4)
Sensitivity Analysis of Non-Linear Dynamic Models: Prioritizing Experimental Research (2009) (4)
A Consistent Methodology Based Parameter Estimation for a Lactic Acid Bacteria Fermentation Model (2017) (4)
An E-learning Bot for Bioprocess Systems Engineering (2020) (4)
Lessons learned from the WWTP benchmarking exercise (2013) (4)
BIOPRO World Talent Campus: A week of real world challenge for biotechnology post-graduate students (2018) (4)
On-line monitoring of fermentation processes in lignocellulose-to-bioalcohol production. (2010) (4)
Two novel S1 peptidases from Amycolatopsis keratinophila subsp. keratinophila D2T degrading keratinous slaughterhouse by-products (2020) (4)
A Framework for Sustainable Design of Algal Biorefineries: Economic Aspects and Life Cycle Analysis (2015) (4)
Control of a Biological Nitrogen Removal Process in an Intensified Single Reactor Configuration (2013) (4)
Systematic Development of Miniaturized (Bio)Processes using Process Systems Engineering (PSE) Methods and Tools (2014) (4)
Exceptionally rich keratinolytic enzyme profile found in the rare actinomycetes Amycolatopsis keratiniphila D2T (2021) (4)
Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model no 1 (BSM1) (2008) (4)
Control Structure Design of an Innovative Enhanced Biological Nutrient Recovery Activated Sludge System Coupled with a Photobioreactor (2015) (4)
Caught in-between: System for in-flow inactivation of enzymes as an intermediary step in "plug-and-play" microfluidic platforms. (2018) (4)
An easy to use GUI for simulating big data using Tennessee Eastman process (2021) (4)
Report and recommendation of a workshop on education and training for measurement, monitoring, modelling and control (M3C) in biochemical engineering (2010) (3)
Model-based optimization of the primary drying step during freeze-drying (2015) (3)
A fuzzy-logic based diagnosis and control of a reactor performing complete autotrophic nitrogen removal (2013) (3)
On-line estimation of kinetic parameters of NH4+ oxidizing bacteria in activated sludge samples using titration in-sensor-experiments (1997) (3)
Modelling and control of an integrated high purity methanol distillation configuration (2021) (3)
Modeling for Process Risk Assessment in Industrial Bioprocesses (2018) (3)
Application of biosensors in wastewater treatment. (1999) (3)
Relative importance of secondary settling tank models in WWTP simulations - A global sensitivity analysis using BSM2 (2012) (3)
Economic and environmental analysis of bio-succinic acid production: from established processes to a new continuous fermentation approach with in-situ electrolytic extraction (2022) (3)
One-millilitre microbioreactor with impeller for improved mixing (2012) (3)
Electrochemical tuning of alcohol oxidase and dehydrogenase catalysis via biosensing towards butanol-1 detection in fermentation media. (2020) (3)
A benchmark simulation model to describe plant-wide phosphorus transformations in WWTPs (2015) (3)
Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model No 1 ( BSM 1 ) (2009) (3)
Assessment of the fate of organic micropollutants in novel wastewater treatment plant configurations through an empirical mechanistic model. (2020) (3)
Model Development for the Optimization of Operational Conditions of the Pretreatment of Wheat Straw (2021) (3)
Sensitivity analysis of the Benchmark Simulation Model no 1 (2008) (3)
A shortcut approach for decision-making and operational analysis of an integrated end-to-end continuous pharmaceutical process (2018) (3)
A systematic methodology for the design of continuous active pharmaceutical ingredient production processes (2011) (3)
Effects of ion strength and ion pairing on (plant-wide) modelling of anaerobic digestion processes (2017) (3)
Wastewater treatment plant influent disturbance models (2010) (3)
Key control handles in integrated urban wastewater systems for improving receiving water quality (2018) (3)
Control of Process Operations and Monitoring of Product Qualities through Generic Model-based Framework in Crystallization Processes (2012) (3)
Extending the BSM platform with occurance, transport and fate of micro-pollutants using the ASM-X framework (2012) (3)
Development of sensors for on-line monitoring of nitrification in activated sludge (1997) (3)
Synthesis and design of optimal biorefinery using an expanded network with thermochemical and biochemical biomass conversion platforms (2013) (3)
Continuous Culture Microbioreactors (2010) (3)
Ask the experts: the challenges and benefits of flow chemistry to optimize drug development. (2012) (3)
Use of bubbleless aeration to improve the performance of titrimetric sensors for the study of denitrification processes (1998) (3)
A Hybrid Model Predictive Control Strategy using Neural Network Based Soft Sensors for Particle Processes (2020) (3)
Digitalisation in Chemical Engineering: Industrial needs, academic best practice, and curriculum limitations (2022) (3)
Computer-Aided Approach for Design of Tailor-Made Blended Products (2012) (3)
A particle model for UASB reactors using the Takács clarifier model (2005) (3)
Towards development of a decision support tool for conceptual design of wastewater treatment plants using stochastic simulation optimization (2019) (3)
Modelling for control: Understanding role and function of regulatory networks in microorganisms (2005) (3)
Biorefinery Sustainability Analysis (2017) (3)
Calibration and validation of a phenomenological dynamic influent pollutant disturbance scenario generator using full-scale data (2013) (3)
Quantifying the importance of flow maldistribution in numbered-up microreactors (2016) (3)
Automated Compartment Model Development Based on Data from Flow-Following Sensor Devices (2021) (3)
Facilitating learning by failure through a pedagogical model-based tool for bioprocesses (2019) (3)
An Efficient Experimental Design Strategy for Modelling and Characterization of Processes (2017) (3)
Inhibition and toxicity modelling within the long-term control benchmark model (BSM1_LT) framework (2009) (3)
Plant-wide assessment of alternative activated sludge configurations for biological nutrient removal under uncertain influent characteristics. (2022) (2)
Development of a mathematical model describing hydrolysis and co-fermentation of C6 and C5 sugars (2010) (2)
Benchmarking integrated control strategies using an extended BSM2 platform (2014) (2)
Process Systems Engineering, 9. Domain Engineering (2012) (2)
Economic risk-based analysis: Effect of technical and market price uncertainties on the production of glycerol-based isobutanol (2016) (2)
Mechanistic Models for Process Development and Optimization of Fed-batch Fermentation Systems (2016) (2)
Expanding activated sludge models with additional processes: A case study based on nitrous oxide production by autotrophic ammonia-oxidizing bacteria (2013) (2)
Uniform and reproducible stirring in a microbioreactor (2011) (2)
Modelling phosphorus (P), sulphur (S) and iron (Fe) interactions during the simulation of anaerobic digestion processes (2015) (2)
Titrimetric biosensing of biological wastewater treatment plants (2001) (2)
Monitoring and modelling of a continuous from-powder-to-tablet process line (2014) (2)
Conceptual Process Design of an Integrated Xylitol Biorefinery With Value-Added Co-Products (2022) (2)
Enzymatic keratin hydrolysis: Dynamic modelling, parameter estimation and validation (2018) (2)
Crystallization Kinetics within a Generic Modeling Framework (2014) (2)
Optimization-based methodology for wastewater treatment plant synthesis – a full scale retrofitting case study (2015) (2)
A generic process template for continuous pharmaceutical production (2012) (2)
Monitoring, control and design of biological wastewater treatment plants with environmental biosensors (1995) (2)
Transforming Data into Actionable Knowledge for Fault Detection, Diagnosis and Prognosis in Urban Wastewater Systems with AI Techniques: A Mini-Review (2023) (2)
Modelling and sensitivity analysis of urinary platinum excretion in anticancer chemotherapy for the recovery of platinum (2016) (2)
Big Data Generation for Time Dependent Processes: The Tennessee Eastman Process for Generating Large Quantities of Process Data (2020) (2)
Integration of Generic Multi-dimensional Model and Operational Policies for Batch Cooling Crystallization (2011) (2)
The Effects of Low Oxidation-Reduction Potential on the Performance of Full-Scale Hybrid Membrane-Aerated Biofilm Reactors (2022) (2)
Global sensitivity analysis of a phenomenological wastewater treatment plant influent generator (2011) (2)
System-wide Benchmark Simulation Model for integrated analysis of urban wastewater systems (2015) (2)
Modeling and Simulation of Upstream and Downstream Processes for Monoclonal Antibody Production (2022) (2)
A Generic Framework for Systematic Design of Process Monitoring and Control System for Crystallization Processes (2012) (2)
Separation of middle boiling trace compounds by distillation: An investigation of practical implications of complex column arrangements on an industrial methanol distillation case study (2020) (2)
Off-line design of PAT systems for on-line applications (2008) (2)
Surrogate Modelling Based Uncertainty and Sensitivity Analysis for the Downstream Process Design of a Xylitol Biorefinery (2020) (2)
Assessment of alkaline stabilization processes in industrial waste streams using a model-based approach. (2021) (2)
Dynamics in population heterogeneity during batch and continuous fermentation of Saccharomyces cerevisiae (2012) (2)
Sludge settling characterisation with an automated Settlometer (1997) (2)
Rapid WWTP performance evaluation over a wide range of operational conditions using artificial neural networks (2005) (2)
Twin‐screw Granulation Process Development: Present Approaches, Understanding and Needs (2017) (2)
Calibration and validation of a model describing complete autotrophic nitrogen removal in granular sludge (2012) (2)
Sensitivity analysis in the WWTP modelling community – new opportunities and applications (2018) (1)
Achieving value from process intensification through better process control (2019) (1)
Techno-economic risk analysis of glycerol biorefinery concepts against market price fluctuation (2015) (1)
A novel in situ measurement method of bubble sizes in bioreactors using a high speed camera (2017) (1)
Fault diagnosis of chemical processes based on joint recurrence quantification analysis (2021) (1)
Measurement and Chemometric Modelling of streptomyces Cultivations (2010) (1)
Model-Based Evaluation of a Data-Driven Control Strategy: Application to Ibuprofen Crystallization (2021) (1)
Model-Based Interpretation of Titrimetric Data to Estimate Aerobic Carbon Source Degradation Kinetics (2001) (1)
Microreactors for Application in biotech Process Development (2010) (1)
Multivariate Analysis of Industrial Scale Fermentation Data (2015) (1)
The Modelling of Noise Processes in Stochastic Differential Equations: Application to Biotechnological Processes (1998) (1)
Process Systems Engineering, 1. Introduction (2012) (1)
State Estimation Methods for Continuous-Discrete Nonlinear Systems involving Stochastic Differential Equations (2022) (1)
Multi-dimensional population balance models of crystallization processes (2014) (1)
Framework for Construction of Multi-scale Models for Biological Wastewater Treatment Processes (2011) (1)
Towards an integrated µ-factory: Design and development of a microfluidic system to include fermentation and biocatalysis (2013) (1)
Micro2-Managed Microbial Communities: Next Generation Environmental Bio/Technologies (2011) (1)
Early stage design and analysis of biorefinery networks (2015) (1)
Development, Validation and Comprehensive Sensitivity Analysis of a Fermentation Model Expediting the Process Design of a Biorefinery (2019) (1)
Hydrodynamic Characterization of Substrate Gradients in a Pilot Scale Fermenter Using CFD and Spatially Distributed Sensors (2015) (1)
Design of microfluidic reactors for biocatalytic reactions (2012) (1)
Design of Process Monitoring and Analysis Systems (2007) (1)
PSE opportunities in biocatalytic process design and development (2012) (1)
Detailed simulation of particle and liquid distribution in the mixing zone of a TwinScrew granulator (2015) (1)
Structurally optimized microbioreactors for immobilized yeast cultivations (2010) (1)
Prediction of Mass and Volumetric Flows in a Full-Scale Industrial Waste Treatment Plant (2022) (1)
Performance of an autotrophic nitrogen removing reactor: Diagnosis through fuzzy logic (2013) (1)
Establishment of a gaseous pH cont rol concept in microbioreactors (2012) (1)
Programming skills across the (bio)engineering curriculum – a students’ perspective (2021) (1)
The effect of bioreactor compartmentalization on yeast population dynamics during continuous cultivation (2013) (1)
State Estimation for Continuous-Discrete-Time Nonlinear Stochastic Systems (2022) (1)
Extending the Benchmark Simulation Model no. 2 (BSM2) with detailed models for dynamic pumping energy consumption (2013) (1)
Implementation of first-principles surface interactions in a hybrid machine learning assisted modelling of flocculation (2021) (1)
Systematic Framework for Design and Adaption of Fast, Flexible, Continuous Modular Plants (2010) (1)
Computational Fluid Dynamics at work - Design and Optimization of Microfluidic Applications (2012) (1)
Flow characterization of aerated bubble column reactor using electrical resistance tomography and computational fluid dynamic methods (2017) (1)
Plant-wide modelling and control of nitrous oxide emissions from wastewater treatment plants (2016) (1)
A case study on robust optimal experimental design for model calibration of ω-Transaminase (2015) (1)
Fulgur: MATLAB GUI Application for Working with near Infrared Calibration Sets. Part 1: The Fulgur Application (2015) (1)
Soft‐sensors application for automated feeding control in high‐throughput mammalian cell cultures (2022) (1)
Systematic design of tailor-made blended products (2013) (1)
Removal of benzaldehyde from a water/ethanol mixture by applying scavenging techniques (2017) (1)
Systematic procedure for generating operational policies to achieve target crystal size distribution (CSD) in batch cooling crystallization (2011) (1)
Modelling of activated sludge process kinetics using a combination of hybrid respirometric and titrimetric data (1999) (1)
Implementation of a Radial Basis Function control strategy for the crystallization of Ibuprofen under uncertainty (2018) (1)
Improved Prediction of Phosphorus Dynamics in Biotechnological Processes by Considering Precipitation and Polyphosphate Formation: A Case Study on Antibiotic Production with Streptomyces coelicolor (2018) (1)
A miniature membrane reactor for evaluation of process design options on the enzymatic degradation of pectin (2011) (1)
Ecological Models: Wastewater Treatment Models (2011) (1)
All-Fiber Raman Probe (2012) (1)
Recent trends in modelling and simulation of biological nutrient removal systems (2012) (1)
Data-based dynamic compartment model: Modeling of E. coli fed-batch fermentation in a 600 m3 bubble column (2022) (1)
Sustainable Value Chain Design for Biorefineries (2019) (1)
Modelling and optimization of C5 and C6 fermentation: focus on pH impact and inhibitors effect (2014) (1)
Development of a fast and flexible generic process for the reduction of nitro compounds (2011) (1)
Model-Based Blend Design: Application to Lubricant Oils (2013) (1)
Tailor-made Design of Chemical Blends using Decomposition-based Computer-aided Approach (2011) (1)
Special Issue on “Recent Advances in Population Balance Modeling” (2021) (1)
Substrates adoption methodology (SAM) to achieve “Fast, Flexible, Future (F3)” pharmaceutical production processes (2011) (1)
Mechanistic models and advanced model analysis within a PAT framework (2009) (1)
An Application of Recursive Principal Component Analysis to a Continuous Biological Phosphorus Removal Process (2004) (1)
Uncertainty reduction in integrated control: Confronting model predictions with information from on-line data (2005) (1)
Approaches to Robust Modelling of Frying Processes (2010) (1)
A CFD model for determining mixing and mass transfer in a high power agitated bioreactor (2016) (1)
One dimensional model of the prediction of residence time distribution granulation in a twin-screw granulator (2013) (1)
PSE in Pharmaceutical Process Development (2011) (1)
Process Evaluation Tools for Enzymatic Cascades Welcome Message (2016) (1)
Membrane microbioreactor prototype for enzyme-catalyzed degradation of pectin (2010) (1)
Towards improved bioprocess operation: monitoring, modeling and control (2012) (0)
Model-based identification of chemicals transformation pathways combined with reaction kinetics models– the case of heroin biomarkers in wastewater (2017) (0)
Synthesis, Design and Analysis of Downstream Separation in Chemical and Bio-Processes (2009) (0)
Model-based analysis of mass transfer limitations in microreactors (2015) (0)
Computer-aided tool for solvent selection in pharmaceutical processes: Solvent swap (2015) (0)
Model-based analysis and experimental validation of residence time distribution in twin-screw granulation (2014) (0)
Process monitoring of a full continuous pharmaceutical tabletting line: mass and energy balance analysis (2013) (0)
Economic, technical, and environmental evaluation of retrofitting scenarios in a full-scale industrial wastewater treatment system. (2022) (0)
Better together or single by choice: Challenges and opportunities in engineering microbial consortia for industrial biomanufacturing applications (2018) (0)
From waste to value: Green chemical production in mixed microbial cultures (2018) (0)
Evaluating the impact of plant-wide WWTP control strategies on energy consumption and greenhouse gas emissions (2012) (0)
Effects of ionic strength, ion pairing and activity corrections on (plant-wide) modelling of anaerobic digestion processes (2014) (0)
Two-dimensional PBM for simultaneous modelling of drying and breakage of pharmaceutical granules (2014) (0)
Recent trends in modeling and simulation of nutrient removal systems (2012) (0)
Implementation of a Process Intensification Approach in the Production of an API Intermediate (2014) (0)
Special issue – ECCE-6 (2008) (0)
Modeling the Residence Time Distribution In a Batch Fermentor: Comparison of CFD Prediction with Experiment (2011) (0)
Adaptive Continuous Template-Based Novel Manufacturing Technique for Faster Manufacturing of New APIs for Clinical Trials (2012) (0)
Biotech Highlight Process analytical technology ( PAT ) for biopharmaceuticals (2011) (0)
Control of Non-Key Compositional Bulges in Industrial Distillation Unit Operations (2018) (0)
Gradient simulation experiments for targeting population heterogeneity in continuous Saccharomyces cerevisiae fermentation (2011) (0)
Application of mechanistic models within a PAT framework (2008) (0)
Methodology on scaling-down of membrane separation process into microfluidic platform (2018) (0)
Acceleration of pharmaceutical production by using micro-reactor technology in a continuous mode (2012) (0)
“Erratum to Editor's name” [Food and Bioproducts Processing (2008) 86 (2), outside back cover and contents list] (2008) (0)
The effect of design and scale on the mixing and mass transfer in U-loop bioreactors (2017) (0)
Example of a process model application: Evaluation of energy efficiency (2011) (0)
Simulation and Optimization of a Predenitrification Plant for Biological Nitrogen Removal (2001) (0)
Extension of a mechanistic model for drying of single pharmaceutical granules to semi-continuous fluid bed drying (2017) (0)
A two-dimensional PBM for continuous drying of a population of granules including drying and breakage (2014) (0)
Systematic Decision-Support Methodology for Resource Recovery (2018) (0)
Cascade systems in ω-transaminase reactions (2011) (0)
Acceleration of Anti-Markovnikov Hydroamination in the Synthesis of an Active Pharmaceutical Ingredient (2016) (0)
A Framework for Optimization of Bioprocess Operation under Uncertainties: A lignocellulosic Ethanol Production Case Study (2011) (0)
Systematic framework for modeling multi-enzymatic synthetic processes (2009) (0)
Considerations for a methodology for selection of cascades for co-product removal in ω-transaminase systems (2013) (0)
Analysis of inline spatial filter velocimetry for granule size feedback control of a continuous pharmaceutical twin-screw granulator (2016) (0)
Combined nitrate and titrimetric measurements for identification of the denitrification process: in calibration of ASMs for BNR systems. (2001) (0)
Model-based optimisation of design and operation of bioreactors with a focus on gas-liquid mass transfer (2017) (0)
Validation of Inhibition Effect in the Cellulose Hydrolysis: a Dynamic Modelling Approach (2011) (0)
Methodological Approach for Modeling of Multienzyme in-pot Processes (2011) (0)
Towards model-based control of granule moisture content during continuous wet granulation (2015) (0)
Design of a water reuse network for industrial symbiosis - A global optimization strategy (2019) (0)
Towards a Digital Twin: A validated Digital Model of a Pilot Scale Bioreactor producing Green Fluorescent Protein (GFP) (2021) (0)
Integrated capacity and production planning in the pharmaceutical supply chain: Framework and models (2023) (0)
Sludge settling characterization with an automated settlometer (1997) (0)
Gradients of pressure in anaerobic digesters (2018) (0)
Development of continuous culture microbioreactors (2008) (0)
Using a PBM to describe the drying behaviour of wet pharmaceutical granules: scenario analysis and GSA (2013) (0)
Data-driven modelling of an industrial anaerobic digestion reactor (2019) (0)
An integral analysis for second generation bioethanol production via a dynamic model-based simulation approach: stochastic nonlinear optimisation (2011) (0)
An experimental study on effect of screw configuration in twin screw wet granulation (2013) (0)
Generic Modelling Framework for Design and Analysis of Crystallization Operations (2013) (0)
Butanol for sustainable aviation (2018) (0)
Rendered-Protein Hydrolysates as a Low-Cost Nitrogen Source for the Fungal Biotransformation of 5-Hydroxymethylfurfural (2022) (0)
Analysis of a twin-screw granulation process using a combined experimental and computational approach (2015) (0)
Local Organizing Committee (Technical University of Denmark, Denmark) (2015) (0)
Atom-to-Enterprise: Multi-scale Modeling of Flocculation Processes (2020) (0)
Quo Vadis Benchmark Simulation Models? 8th IWA Symposium on Systems Analysis and Integrated Assessment (2018) (0)
Continuous hydrolysis and L-L phase separation of an active pharmaceutical ingredient using a miniscale PTFE membrane separator (2012) (0)
Control of sewers using measured data (2005) (0)
Modelling of drying processes of pharmaceutical granules (2011) (0)
Uncertainty and Sensitivity Analysis for an Ibuprofen Synthesis Model Based on Hoechst Path (2017) (0)
Corrigendum to ‘Economic and environmental analysis of bio-succinic acid production: From established processes to a new continuous fermentation approach with in-situ electrolytic extraction’ [Chemical Engineering Research and Design Volume 179, March 2022, Pages 401–414] (2022) (0)
On-line monitoring of fermentation processes using near infrared spectroscopy and multiwavelength fluorescence (2006) (0)
Study of concentration gradients in a full-scale anaerobic digester: an energy-efficient mixing strategy (2019) (0)
Integrated modelling of two xenobiotic organic compounds in the urban wastewater system – a simulation exercise (2005) (0)
On-line monitoring of fermentation processes using multi-wavelength fluorescence (2007) (0)
Fulgur: MATLAB GUI Application for Working with near Infrared Calibration Sets. Part 2: The Source Code (2016) (0)
Experimental investigation of residence time distribution in twin-screw granulation (2014) (0)
Process monitoring and modeling of a continuous pharmaceutical from powder to tablet process Line using a mass & energy balance (2014) (0)
Continuous enrichment strategies for biobutanol production (2018) (0)
Sensor equipment for quantification of spatial heterogeneity in large bioreactor (2014) (0)
Application of Multivariate Analysis Tools to Industrial Scale Fermentation Data (2015) (0)
Improving the Prediction of Phosphate Dynamics in Biotechnological Processes: A Case Study Based on Antibiotic Production Using Streptomyces coelicolor (2017) (0)
Technology Evaluation of Process Configurations for Second Generation Bioethanol Production using Dynamic Model-based Simulations (2011) (0)
Cleaning of toothpaste from vessel walls by impinging liquid jets and their falling films: quantitative modelling of soaking effects: Data and Supplementary Information (2019) (0)
Image Analysis and IR Spectroscopy for integral fermentation understanding and control (2018) (0)
Bringing frequency response analysis closer to Chemical Engineering (2020) (0)
Phenomenological modelling of illicit drugs at the inlet of a WWTP using the BSM2 influent generator (2014) (0)
2 Case Study : Aerobic Cultivation of Budding Yeast (2013) (0)
A methodology for cascade selection for co-product removal in the ω-transaminase system (2012) (0)
Benchmarking dry weather integrated control strategies using an extended BSM2 platform (2014) (0)
Scale-up of biocatalytic processes (2008) (0)
Sensor integration in microbioreactor systems for high performance processes (2016) (0)
SMAC – SMArt Control of wastewater system, Deliverable 2: Working Report on Data Acquisition and Processing (2004) (0)
Graduate Schools Yearbook 2010 (2011) (0)
Modelling across bioreactor scales: methods, challenges and limitations (2014) (0)
Applying the ASM3 model for evaluation of control strategies for a biological nitrogen removal wastewater treatment plant (2005) (0)
Evaluation of particle shape and size evolution during high-shear wet granulatoin using twin-screw granulator (2013) (0)
Investigation of twin screw granulation : integrating experimental and computational approaches (2015) (0)
A novel control strategy for single-stage autotrophic nitrogen 3 removal in SBR 4 (2017) (0)
EFFECTS OF IONIC STRENGTH AND ION PAIRING ON ( PLANT-WIDE ) 1 MODELLING OF ANAEROBIC DIGESTION 2 3 (2014) (0)
Modeling Approaches for Describing Microbial Population Heterogeneity (2013) (0)
Gaining process knowledge by using mechanistic models for fluidized bed drying in a continuous manufacturing environment (2015) (0)
Application of ICAS-PAT On Design of Process Monitoring and Control System for a Batch Cooling Crystallization Process through Hybrid Multiscale Model-Based Analysis (2009) (0)
Unsupervised Monitoring of Flocculation Processes based on Recurrence Theory (2021) (0)
Filamentous Fungi Fermentation (2014) (0)
Microbioreactors for bioprocess development - practical aspects and limitations (2010) (0)
Systematic Modelling and Crystal Size Distribution Control for Batch Crystallization Processes (2011) (0)
A dynamic design space for primary drying during batch freeze-drying (2016) (0)
Application of model uncertainty analysis on the modelling of the drying behaviour of single pharmaceutical granules (2012) (0)
Sampling Error of TOC swab in Pharmaceutical Cleaning Verification. (2022) (0)
Designing a fault detection classifier framework for an industrial dynamic ultrafiltration membrane process using wavelet-based feature analysis (2023) (0)
Imaging for monitoring downstream processing of fermentation broths (2017) (0)
Modelling Fungal Fermentations for Enzyme Production (2012) (0)
Applying spectroscopic methods and chemometrics to get a snap-shot of physiology in fermentation processes (2009) (0)
Biocatalytic process technology (2010) (0)
Experimental and model-based investigation of twin screw granulation: towards more profound process knowledge (2014) (0)
Occurrence, characterisation and fate of Ti and Ag in two 1 Norwegian wastewater treatment plants (2018) (0)
Modelling Framework for the Identification of Critical Variables and Parameters under Uncertainty in the Bioethanol Production from Lignocellulose (2011) (0)
Shaping an Open Microbiome for Butanol Production through Process Control (2022) (0)
Reduction of a Mechanistic Drying Model of Pharmaceutical Granules for Inclusion in a Population Balance Model with Continuous Growth Term (2012) (0)
Monitoring of glucose and ammonium concentration in Streptomyces coelicolor fermentations using in situ Nir (2009) (0)
Characterization of compaction behaviour of powders in solid-dosage manufacturing using finite element analysis (2016) (0)
Kinetic parameter estimation including uncertainty under mass transfer limited conditions (2016) (0)
Use of operating windows for assessment of continuous plug flow slurry reactor (2015) (0)
Recent advances in clarifier modelling (2008) (0)
BENCHMARKING OF CONTROL STRATEGIES FOR THE PREVENTION OF NITROUS OXIDE ACCUMULATION IN WASTEWATER TREATMENT PLANTS (2016) (0)
Sustainable downstream routes for bio-manufacturing processes (2018) (0)
Rapid and Efficient Development of Downstream Bio-Pharmaceutical Processing Alternatives (2018) (0)
Improving Speed and Efficiency of Global Sensitivity Analysis Using Metamodeling-Based Approach: A Case Study on Wastewater Treatment Plant Modeling (2018) (0)
Membrane Microbioreactor for Enzyme-Catalyzed Degradation of Pectin (2010) (0)
Global sensitivity analysis on a PBM-model describing the drying behaviour of wet pharmaceutical granules (2013) (0)
Large scale simulations of Trichoderma reesei fermentation using computational fluid dynamics: Approach and early successes (2017) (0)
Uncertainty & sensitivity analysis of economic assessment of lactic acid production from crude glycerol – impact of price correlations (2017) (0)
Combined experimental and computational approach to elucidate the twin-screw granulation process (2015) (0)
Study of Crystallization Kinetics Within a Generic Modelling Framework (2013) (0)
Crystallization Systems (2016) (0)
Applying inline spatial filter velocimetry to improve process robustness of a continuous twin-screw wet granulator (2017) (0)
Food waste as substrate to obtain two different enriched microbiomes for model development (2017) (0)
Model-based control of a pilot scale fermentation process using a predictive control strategy (2016) (0)
An uncertainty-aware hybrid modelling approach using probabilistic machine learning (2021) (0)
A Robust Process Analytical Technology (PAT) System Design for Crystallization Processes (2013) (0)
Experimental investigation linking granulation performance with Residence time and granulation liquid distributions in TwinScrew granulation (2015) (0)
Nitrous Oxide Emissions from Two Full-Scale Membrane-Aerated Biofilm Reactors (2023) (0)
Systematic decision-support methodology for identifying promising platform technologies towards circular economy (2019) (0)
pH variation and influence in a nitrogen converting biofilm (2012) (0)
Development of an on-line state estimator for fed-batch filamentous fungal fermentations (2015) (0)
CFD application as a tool for designing industrial fermenters (2018) (0)
Crystallization Kinetics Identification within a Generic Modeling Framework (2012) (0)
Influent N-load reduction for the BSM2 and the BSM1_LT (2005) (0)
Biomass Measurements in Filamentous Fermentations: Comparison of Advanced On-Line Sensors (2010) (0)
Application of global sensitivity analysis as preparatory step for reduction of a drying model of pharmaceutical granules (2012) (0)
Evaluating Resource Recovery Options in Wastewater Treatment Plants Using Mathematical Models (2021) (0)
A strategy for rapid WWTP performance evaluation combining deterministic and black-box models (2005) (0)
Development of critical quality attributes control strategies in a continuous high shear wet granulation process (2014) (0)
Variable-volume sludge blanket reactor - a simple way to model denitrification in secondary settler tanks (2004) (0)
New trends in on-line influent nitrification toxicity monitoring (1996) (0)
Modelling and Economic Optimal Control for a Laboratory-scale Continuous Stirred Tank Reactor for Single-cell Protein Production (2022) (0)
Modelling of microbial-related operational problems in WWT (2010) (0)
1 BSM 2 : A model for dynamic influent data generation Technical report (2008) (0)
Experiment Design, Modeling and Comparative Design Optimization of the Pretreatment of Wheat Straw for the Sustainable Production of Xylitol (2019) (0)
Modelling and Dynamic Optimization of beer fermentation towards optimal flavor and operation (2021) (0)
Development of regime map for steady-state high shear wet twin-screw granulation (2015) (0)
Modelling biotransformation of drug biomarkers by sewer biofilms (2017) (0)
Design of a gas-inducing impeller using Computational Fluid Dynamics (2017) (0)
Modification of the Upstream Process Design in a Biorefinery by Modeling and combined Uncertainty and Sensitivity Analysis (2019) (0)
New Framework for Standardized Notation in Wastewater Treatment Modelling (2010) (0)
Design of a process template for amine synthesis (2015) (0)
Monitoring of denitrification performance with combined nitrate and titrimetric measurements. (2001) (0)
Towards a single empirical correlation to predict kLa across scales and processes (2014) (0)
Topology Optimized Bioreactors — A Design Example with Immobilized Yeast (2012) (0)
Model Reduction Using Neural Networks Applied To The Modeling Of Integrated Urban Wastewater Systems (2006) (0)
Framework for the analysis of crystallization operations (2012) (0)
NyctiDB: A non-relational bioprocesses modeling database supported by an ontology (2022) (0)
From Paper to web: Students as partners for virtual laboratories in (Bio)chemical engineering education (2022) (0)
Miniaturized Experimental Toolbox for ω-Transaminase Technology (BIOINTENSE) (2013) (0)
Uncertainty and Sensitivity Analysis on PAT System Performance for Crystallization Processes (2013) (0)
CAPEC Research Report - 2002 (2002) (0)
Modelling physico-chemistry in extreme conditions (2016) (0)
A “real‐time” sequential hybrid modeling approach to monitor and forecast key process variables in ethanol fermentation using lignocellulosic feedstocks (2019) (0)
A Combined N and P Removal Wastewater Treatment Plant Simulation Benchmark for Control Strategy Evaluation (2003) (0)
Analysis of design configurations/control strategies in biological nutrient removal processes using multivariate statistics (2013) (0)
Applying reconstruction methods on the solution of a moment-based pharmaceutical drying process Population Balance Model (2014) (0)
Concepts in multi-step biocatalysis (2010) (0)
Superstructure development and optimization for design/retrofit of municipal wastewater treatment plants (2013) (0)
Early-stage design of municipal wastewater treatment plants – presentation and discussion of an optimisation based concept (2014) (0)
Control structure design for an EBP 2 R process operated as a sequencing batch reactor (2015) (0)
Modelling N2O dynamics in the engineered N cycle: Evaluation of alternate model structures (2014) (0)
To be fAIr: ethical and fair application of artificial intelligence in virtual laboratories (2022) (0)
On-line monitoring of fermentation of 2G bioethanol (2018) (0)
Development of a population balance model for continuous twin-screw granulation in pharmaceutical manufacturing (2014) (0)
Enzymatic process intensification across scales (2013) (0)
Mechanistic modelling for process understanding of fluidized bed drying process part of a full continuous pharmaceutical manufacturing line (2014) (0)
Experimental investigation of the link between granulation performance, residence time and granulation liquid distribution in twin-screw granulation (2015) (0)
Scenario analysis on a PBM describing the drying behaviour of wet pharmaceutical granules (2013) (0)
Particle modelling using advanced image analysis and deep learning (2019) (0)
10 years of benchmarks development for improving wastewater treatment plants control strategies (2008) (0)
Artificial neural network identification for modelling of ASM3-based WWTP models (2005) (0)
Applying supervisory process control practices to continuous pharmaceutical manufacturing (2016) (0)
Population balance models for microbial populations: describing heterogenity in fermentors (2010) (0)
Experimental investigation of residence time, granulation liquid and granule size distributions in twin-screw granulation (2015) (0)
The use of mass and energy balances for process monitoring of a full continuous pharmaceutical from powder to tablet manufacturing (2013) (0)
A Simulation-Based Superstructure Optimization Approach for Process Synthesis and Design Under Uncertainty (2019) (0)
Model-Based Analysis and Efficient Operation of aGlucose Isomerization Reactor Plant (2015) (0)
XXXII National Meeting and First International Congress AMIDIQ (2011) (0)
Calibration and evaluation of predictive accuracy of a (micro)pollutant influent generator (2015) (0)
Comparison of laser diffraction and image analysis for measurement of Streptomyces coelicolor cell clumps and pellets (2012) (0)
Model-based process analysis in continuous manufacturing of pharmaceuticals : calibration of a fluid bed dryer model (2016) (0)
Modelling the impacts of operational conditions on the performance of a full-scale membrane aerated biofilm reactor. (2022) (0)
Process monitoring for the continuous tabletting line ConsiGma using in-line measurements (2013) (0)
Shape optimisation of a microreactor for biocatalytic synthesis of optically pure chiral amines (2014) (0)
The use of an advanced aqueous phase chemistry approach with IWA biological process models in a plant-wide context (2016) (0)
Understanding control mechanisms in microorganisms: representation of regulatory networks (2004) (0)
A Data Analytics Pipeline to Optimise Polymer Dose Strategy in a Semi-Continuous Multi-Feed Dewatering System (2023) (0)
BIOPRO-Sim: A benchmark simulation model for bio-manufacturing processes (2019) (0)
An optimization based framework for design and retrofit of municipal wastewater treatment plants: Case study on side-stream nitrogen removal technologies (2014) (0)
Optimization of Wastewater Treatment Plant Design Using an Early-Stage Techno-Economic Analysis Under Uncertainty (2018) (0)
Joint state and parameter estimation based extended Kalman filter of activated sludge processes: A benchmark study (2005) (0)
Targeting population heterogeneity in Saccharomyces cerevisiae batch fermentation for optimal cell factories (2011) (0)
Quantifying uncertainties of nucleation and crystal growth models on PAT system performance for crystallization processes (2012) (0)
Process monitoring and modeling of a continuous pharmaceutical from powder to tablet process line using a mass and energy balance (2014) (0)
Advanced process control practices for continuous pharmaceutical twin-screw wet granulation (2017) (0)
A Model-Based Framework for Systematic Product Quality Monitoring and Control (2008) (0)
Monitoring yeast fermentations by nonlinear infrared technology and chemometrics—understanding process correlations and indirect predictions (2020) (0)
A software tool for design of process monitoring and analysis systems (2008) (0)
SHARON‐Anammoxプロセスを用いたリジェクト水処理の施設全体(BSM2)評価 (2006) (0)
Lad vand og data strømme (2019) (0)
New Strategies for Green Butanol Production (2018) (0)
Heterogeneous Microbial Populations: Using Flow Cytometric Data for Building Dynamic Distributed Models (2011) (0)
Optimal algal cultivation for used water resource recovery (2016) (0)
Pin-to-Mesh Discharges in Flowing Air (2003) (0)
Process Technology Evaluation for Lignocellulosic Bioethanol Production: Plantwide Configurations Using a Dynamic Modeling Approach (2010) (0)
Visualization of compaction behavior of pharmaceutical powders in solid-dosage manufacturing using finite element analysis (2017) (0)
Uncertainty analysis applied on drying model for pharmaceutical granules (2012) (0)
An Empirical Model for Carbon Recovery in a Rotating Belt Filter and Its Application in the Frame of Plantwide Evaluation (2017) (0)

This paper list is powered by the following services:

Other Resources About Krist V. Gernaey

orbit.dtu.dk

What Schools Are Affiliated With Krist V. Gernaey?

Krist V. Gernaey is affiliated with the following schools:

Krist V. Gernaey's Academic­Influence.com Rankings