Kuo–chih Chou

Q: What Schools Are Affiliated With Kuo–chih Chou

Kuo–chih Chou is affiliated with the following schools: University of Science and Technology Beijing, University of Pennsylvania, Shanghai University, Massachusetts Institute of Technology

Kuo–chih Chou's AcademicInfluence.com Rankings

Kuo–chih Chou

Physics

#5242

World Rank

#7048

Historical Rank

physics Degrees

Download Badge

Physics

Kuo–chih Chou's Degrees

PhD Materials Science and Engineering National Taiwan University
Masters Materials Science and Engineering National Taiwan University
Bachelors Materials Science and Engineering National Taiwan University

Why Is Kuo–chih Chou Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Kuo–chih Chou's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Thermodynamics and kinetics of phase transformation in rare earth–magnesium alloys: A critical review (2020) (327)
A general solution model for predicting ternary thermodynamic properties (1995) (181)
Superior Photodetectors Based on All-Inorganic Perovskite CsPbI3 Nanorods with Ultrafast Response and High Stability. (2018) (177)
Kinetics of absorption and desorption of hydrogen in alloy powder (2005) (140)
Comprehensive Determination of Kinetic Parameters in Solid-State Phase Transitions: An Extended Jonhson–Mehl–Avrami–Kolomogorov Model with Analytical Solutions (2016) (134)
A Kinetic Model for Oxidation of Si–Al–O–N Materials (2006) (96)
A new model for hydriding and dehydriding reactions in intermetallics (2007) (95)
Kinetics and mechanism of hydrogen reduction of MoO3 to MoO2 (2013) (86)
A Study of Ternary Geometrical Models (1989) (86)
Catalytic effect of Ni@rGO on the hydrogen storage properties of MgH2 (2020) (84)
Formalism of new ternary model expressed in terms of binary regular-solution type parameters (1996) (83)
Modelling Viscosities of CaO–MgO–Al2O3–SiO2 Molten Slags (2012) (77)
Hydrogen absorption and desorption kinetics of Ag–Mg–Ni alloys (2004) (69)
A Structurally Based Viscosity Model for Oxide Melts (2014) (68)
Fluoroethylene Carbonate as Electrolyte Additive for Improving the electrochemical performances of High-Capacity Li1.16[Mn0.75Ni0.25]0.84O2 Material (2015) (67)
Modeling Viscosities of CaO-MgO-FeO-MnO-SiO2 Molten Slags (2012) (63)
B-doped 3C-SiC nanowires with a finned microstructure for efficient visible light-driven photocatalytic hydrogen production. (2015) (62)
Influence of alloyed magnesium on the microstructure and long-term corrosion behavior of hot-dip Al–Zn–Si coating in NaCl solution (2016) (61)
Efficient synergy of photocatalysis and adsorption of hexavalent chromium and rhodamine B over Al4SiC4/rGO hybrid photocatalyst under visible-light irradiation (2019) (61)
Effects of Ce on the hydrogen storage properties of TiFe0.9Mn0.1 alloy (2017) (59)
Electrochemical performance and stability of La0·5Sr0·5Fe0·9Nb0·1O3- δ symmetric electrode for solid oxide fuel cells (2018) (54)
Adsorption and dissociation of hydrogen on MgO surface: A first-principles study (2009) (54)
Kinetics of High‐Temperature Oxidation of Inorganic Nonmetallic Materials (2009) (53)
Thermodynamic investigation on phase formation in the Al–Si rich region of Al–Si–Ti system (2016) (53)
Improved microwave absorption performance of modified SiC in the 2–18 GHz frequency range (2017) (51)
Viscosity of Fluoride‐Free Mold Fluxes Containing B2O3 and TiO2 (2013) (50)
Phase Equilibria, Crystal Structure and Hydriding/Dehydriding Mechanism of Nd4Mg80Ni8 Compound (2015) (50)
Experimental investigation and thermodynamic calculation of the Mg–Ni–Y system (Y < 50 at.%) at 400 and 500 °C (2015) (50)
Effect of LiBH4 on hydrogen storage property of MgH2 (2013) (50)
Porous hexagonal boron nitride whiskers fabricated at low temperature for effective removal of organic pollutants from water (2016) (48)
A new solution model for predicting ternary thermodynamic properties (1987) (48)
Influence of the initial hydrogen pressure on the hydriding kinetics of the Mg2−xAlxNi (x=0,0.1) alloys (2004) (47)
Thermodynamic prediction of thermal diffusivity and thermal conductivity in Mg–Zn–La/Ce system (2021) (47)
Ce-doped La0.7Sr0.3Fe0.9Ni0.1O3−δ as symmetrical electrodes for high performance direct hydrocarbon solid oxide fuel cells (2017) (46)
Experimental study and phase diagram calculation in Al–Zn–Mg–Si quaternary system (2010) (45)
A Facile Synthesis of a Three-Dimensional Flexible 3C-SiC Sponge and Its Wettability (2014) (45)
A simple model for the oxidation of carbon-containing composites (2010) (44)
Structure of CaO–B2O3–SiO2–TiO2 Glasses: a Raman Spectral Study (2011) (44)
Oxidation roasting of molybdenite concentrate (2015) (44)
Study on kinetics of hydrogen reduction of MoO2 (2013) (43)
Evolution Mechanisms of MgO·Al 2 O 3 Inclusions by Cerium in Spring Steel Used in Fasteners of High-speed Railway (2015) (42)
The water-gas shift reaction for hydrogen production from coke oven gas over Cu/ZnO/Al2O3 catalyst (2016) (42)
Effects of B2O3 and TiO2 on Crystallization Behavior of Slags in Al2O3–CaO–MgO–Na2O–SiO2 System (2013) (41)
Bandgap alignment of α-CsPbI3 perovskites with synergistically enhanced stability and optical performance via B-site minor doping (2019) (41)
Measuring and Modeling Viscosity of CaO-Al2O3-SiO2(-K2O) Melt (2012) (41)
Investigation on kinetics mechanism of hydrogen absorption in the La2Mg17-based composites (2009) (41)
Simple Method for Estimating the Electrical Conductivity of Oxide Melts with Optical Basicity (2010) (41)
Experimental investigation and thermodynamic calculation of the Al–Si–Ti system in Al-rich corner (2014) (40)
Structural Study of Glassy CaO–SiO2–CaF2–TiO2 Slags by Raman Spectroscopy and MAS-NMR (2014) (40)
Viscosity of CaO-MgO-Al2O3-SiO2-TiO2 Melts Containing TiC Particles (2015) (39)
Estimation of Sulfide Capacities of Multicomponent Slags using Optical Basicity (2013) (38)
Quantitative interpretation of the parabolic and nonparabolic oxidation behavior of nitride ceramic (2009) (37)
A comparative study on the hydriding kinetics of Zr-based AB2 hydrogen storage alloys (2008) (37)
A new measurement and treatment for kinetics of isothermal oxidation of Si3N4 (2008) (37)
General Strategy for Rapid Production of Low-Dimensional All-Inorganic CsPbBr3 Perovskite Nanocrystals with Controlled Dimensionalities and Sizes. (2018) (36)
Cadmium sulfide with tunable morphologies: Preparation and visible-light driven photocatalytic performance (2017) (36)
Reduction Kinetics of Metal Oxides by Hydrogen (2013) (36)
Kinetics and mechanism of hydrogen reduction of ilmenite powders (2015) (35)
Simultaneously electrochemical detection of uric acid and ascorbic acid using glassy carbon electrode modified with chrysanthemum-like titanium nitride (2017) (35)
A study on the hydriding-dehydriding kinetics of Mg1.9Al0.1Ni (2004) (35)
Model for evaluating density of molten slag with optical basicity (2010) (35)
Preparation and properties of hexagonal boron nitride fibers used as high temperature membrane filter (2014) (34)
Bare and boron-doped cubic silicon carbide nanowires for electrochemical detection of nitrite sensitively (2016) (33)
Oxidation kinetics of aluminum nitride at different oxidizing atmosphere (2008) (33)
Effects of MgO and Al2O3 Addition on Redox State of Chromium in CaO-SiO2-CrOx Slag System by XPS Method (2015) (32)
Size-controlled synthesis of nano Mo powders via reduction of commercial MoO3 with carbon black and hydrogen (2019) (32)
Preparation of TiOxNy/TiN composites for photocatalytic hydrogen evolution under visible light. (2015) (31)
Crystallization Kinetics and Structure of Mold Fluxes with SiO2 Being Substituted by TiO2 for Casting of Titanium-Stabilized Stainless Steel (2013) (31)
Model of oxidation of SiC microparticles at high temperature (2008) (31)
Ultra-Stable and Durable Piezoelectric Nanogenerator with All-Weather Service Capability Based on N Doped 4H-SiC Nanohole Arrays (2021) (31)
Some new perspectives on oxidation kinetics of SiAlON materials (2008) (31)
Some new perspectives on oxidation kinetics of SiAlON materials (2008) (31)
Estimating ternary viscosity using the thermodynamic geometric model (2003) (31)
Single crystalline 3C-SiC whiskers used for electrochemical detection of nitrite under neutral condition (2016) (31)
A Novel Process for Simultaneous Extraction of Iron, Vanadium, Manganese, Chromium, and Titanium from Vanadium Slag by Molten Salt Electrolysis (2016) (30)
Influence of Pre-oxidation on Carbothermic Reduction Process of Ilmenite Concentrate (2015) (30)
Effect of Co substitution for Ni and magnetic-heat treatment on the structures and electrochemical properties of La-Mg-Ni-type hydrogen storage alloys (2009) (30)
General Formalism for New Generation Geometrical Model: Application to the Thermodynamics of Liquid Mixtures (2010) (30)
Study on oxidation mechanism and kinetics of MoO 2 to MoO 3 in air atmosphere (2016) (30)
A new treatment for kinetics of oxidation of silicon carbide (2009) (30)
Study on Hydrogen Reduction of Ultrafine MoO2 To Produce Ultrafine Mo (2016) (29)
On the characterization of La1.5Mg17Ni0.5 composite materials prepared by hydriding combustion synthesis (2004) (29)
Correlation Between Viscosity and Electrical Conductivity of Aluminosilicate Melts (2012) (29)
Effect of cerium on the cleanliness of spring steel used in fastener of high-speed railway (2014) (29)
The synergistic effect of the structural precursors of Cu/ZnO/Al2O3 catalysts for water–gas shift reaction (2011) (28)
Influence of CaF2 on viscosity of aluminosilicate melts (2013) (28)
Hydrogen absorption and desorption characteristics in the La0.5Ni1.5Mg17 prepared by hydriding combustion synthesis (2006) (28)
Preparation of Ultrafine β-MoO3 from Industrial Grade MoO3 Powder by the Method of Sublimation (2016) (27)
Organic intercalation engineering of quasi-2D Dion–Jacobson α-CsPbI3 perovskites (2020) (27)
First‐Principles Optimization of Out‐of‐Plane Charge Transport in Dion–Jacobson CsPbI3 Perovskites with π‐Conjugated Aromatic Spacers (2021) (27)
Influence of the density of oxide on oxidation kinetics (2014) (27)
Mechanism and kinetic study of hydrogen reduction of ultra-fine spherical MoO3 to MoO2 (2016) (27)
TiN @NiCo2O4 coaxial nanowires as supercapacitor electrode materials with improved electrochemical and wide-temperature performance (2017) (27)
Relation Between Viscosity and Electrical Conductivity of Silicate Melts (2011) (27)
Calculation of physicochemical properties in a ternary system with miscibility gap (2004) (26)
Synthesis of nanocrystalline molybdenum powder by hydrogen reduction of industrial grade MoO3 (2016) (26)
Phase Transitions and Morphology Evolutions during Hydrogen Reduction of MoO3 to MoO2 (2014) (26)
Influence of Al2O3/SiO2 Ratio on Viscosities of CaO–Al2O3–SiO2 Melt (2013) (26)
Experimental measurements and modelling of viscosity in CaO–Al2O3–MgO slag system (2011) (26)
Fabrication and oxidation behavior of Al4SiC4 powders (2017) (26)
Synthesis of metal-doped Mn-Zn ferrite from the leaching solutions of vanadium slag using hydrothermal method (2018) (26)
Enhancing photoluminescence properties of SiC/SiO2 coaxial nanocables by making oxygen vacancies. (2016) (26)
Application of Graham scan algorithm in binary phase diagram calculation (2006) (25)
Experimental study and thermodynamic assessment of the Al–Fe rich side of the Al–Zn–Fe system at 300 and 550 ° C (2012) (25)
Influence of Al2O3/TiO2 Ratio on Viscosities and Structure of CaO–MgO–Al2O3–SiO2–TiO2 Melts (2014) (24)
Preparation of hexagonal BN whiskers synthesized at low temperature and their application in fabricating an electrochemical nitrite sensor (2016) (24)
Wurtzite AlN(0001) Surface Oxidation: Hints from Ab Initio Calculations. (2018) (24)
Facile synthesis of hexagonal boron nitride fibers with uniform morphology (2013) (24)
Effect of TiO2 Addition on Crystallization Characteristics of CaO-Al2O3-based Mould Fluxes for High Al Steel Casting (2015) (24)
A model for estimating the viscosity of blast furnace slags with optical basicity (2012) (24)
A comparative study on effect of microwave sintering and conventional sintering on properties of Nd–Mg–Ni–Fe3O4 hydrogen storage alloy (2010) (24)
Dehydrogenation kinetics of magnesium hydride investigated by DFT and experiment (2010) (23)
A criterion for evaluating glass-forming ability of alloys (2009) (23)
Phase equilibria of Ce–Mg–Ni ternary system at 673 K and hydrogen storage properties of selected alloy (2016) (23)
Synthesis of molybdenum nitrides nanosheets by nitriding 2H‐MoS2 with ammonia (2018) (23)
Excellent Electrochemical Performance of La0.3Sr0.7Fe0.9Ti0.1O3-δ as a Symmetric Electrode for Solid Oxide Cells. (2021) (23)
Carbothermic Reduction of Titanium-Bearing Blast Furnace Slag (2016) (23)
Structure and Crystallization Kinetics of Glassy CaO-Al2O3-SiO2-CaF2-Na2O Mold Fluxes with Varying Basicity (2015) (23)
Progress in cognition of gas-solid interface reaction for non-oxide ceramics at high temperature (2020) (23)
Influence of TiC on the Viscosity of CaO–MgO–Al 2 O 3 –SiO 2 –TiC Suspension System (2015) (22)
Selective Chlorinated Extraction of Iron and Manganese from Vanadium Slag and Their Application to Hydrothermal Synthesis of MnFe2O4 (2017) (22)
Synthesis and dehydrogenation behavior of Mg–Fe–H system prepared under an external magnetic field (2008) (22)
The effective determination of Cd(ii) and Pb(ii) simultaneously based on an aluminum silicon carbide-reduced graphene oxide nanocomposite electrode. (2017) (22)
A comparison of different geometrical models in calculating physicochemical properties of quaternary systems (2010) (22)
A comparison of traditional geometrical models and mass triangle model in calculating the surface tensions of ternary sulphide melts (2008) (22)
A new model to describe absorption kinetics of Mg-based hydrogen storage alloys (2011) (22)
SiC Nanowires with Tunable Hydrophobicity/Hydrophilicity and Their Application as Nanofluids. (2016) (22)
Shape-Controlled Synthesis of Ultrafine Molybdenum Crystals via Salt-Assisted Reduction of MoO2 with H2 (2018) (21)
Phase Evolution During the Carbothermic Reduction Process of Ilmenite Concentrate (2015) (21)
Influence of particle size distribution on oxidation behavior of SiC powder (2009) (21)
Electrochemical performance and carbon deposition of anode-supported solid oxide fuel cell exposed to H-2-CO fuels (2017) (21)
Synergizing the multiple plasmon resonance coupling and quantum effects to obtain enhanced SERS and PEC performance simultaneously on a noble metal-semiconductor substrate. (2017) (20)
Tunable fabrication of single-crystalline CsPbI3 nanobelts and their application as photodetectors (2021) (20)
The effect of defects on the hydrogenation in Mg (0 0 0 1) surface (2009) (20)
A novel method for vanadium slag comprehensive utilization to synthesize Zn-Mn ferrite and Fe-V-Cr alloy. (2018) (20)
Corrosion behavior of porous silicon nitride ceramics in different atmospheres (2017) (20)
Computational study on various properties of CaO-Al2O3-SiO2 mold flux (2019) (20)
Re-assessment of the Mg–Zn–Ce system focusing on the phase equilibria in Mg-rich corner (2020) (19)
Effect of Al on the hydrogen storage properties of Mg(BH4)2 (2013) (19)
Comparative study on the controlled hydriding combustion synthesis and the microwave synthesis to prepare Mg2Ni from micro-particles (2010) (19)
Highly Efficient, Redox-Stable, La0.5Sr0.5Fe0.9Nb0.1O3- δ Symmetric Electrode for Both Solid-Oxide Fuel Cell and H2O/CO2 Co-Electrolysis Operation (2018) (19)
Boosting of water splitting using the chemical energy simultaneously harvested from light, kinetic energy and electrical energy using N doped 4H-SiC nanohole arrays (2022) (19)
Effect of hydrogen pressure on hydriding kinetics in the Mg2−xAgxNi–H (x = 0.05, 0.1) system (2005) (19)
Viscosity model for aluminosilicate melt (2012) (19)
A Morphological Study of the Reduction of MoO2 by Hydrogen (2015) (19)
Comparison of the Diffusion Control Models for Isothermal Oxidation of SiAlON Powders (2008) (19)
Synthesis of Titanium Oxycarbide from Titanium Slag by Methane-Containing Gas (2018) (19)
Study on Structure Characteristics of B2O3 and TiO2-bearing F-Free Mold Flux by Raman Spectroscopy (2013) (18)
Preparation of LiBOB via rheological phase method and its application to mitigate voltage fade of Li1.16[Mn0.75Ni0.25]0.84O2 cathode (2015) (18)
Enhancing the Stability of Orthorhombic CsSnI3 Perovskite via Oriented π-Conjugated Ligand Passivation. (2020) (18)
Sintering behavior of molybdenum‑copper and tungsten‑copper alloys by using ultrafine molybdenum and tungsten powders as raw materials (2020) (18)
New Perspectives on the Gas–Solid Reaction of α‐Si3N4 Powder in Wet Air at High Temperature (2016) (18)
Influences of Al2O3/CaO and Na2O/CaO Ratios on Viscosities of CaO-Al2O3-SiO2-Na2O Melts (2014) (18)
Effects of PVP on the preparation and growth mechanism of monodispersed Ni nanoparticles (2008) (18)
Influences of Na2O and K2O Additions on Electrical Conductivity of CaO-MgO-Al2O3-SiO2 Melts (2017) (18)
Morphological evolution of porous silicon nitride ceramics at initial stage when exposed to water vapor (2017) (18)
Hydrogen storage properties of mechanically alloyedMg–8 mol% LaNi0.5 composite (2004) (18)
The influence of Ce micro-alloying on the precipitation of intermetallic sigma phase during solidification of super-austenitic stainless steels (2020) (18)
A GENERAL MODEL FOR BOP DECARBURIZATION (1993) (17)
Study on Reduction of MoO2 Powders with CO to Produce Mo2C (2016) (17)
Wells–Dawson type Cs5.5H0.5P2W18O62 based Co/Al2O3 as binfunctional catalysts for direct production of clean-gasoline fuel through Fischer–Tropsch synthesis (2016) (17)
Mechanism and kinetics of the carbothermic reduction of titanium-bearing blast furnace slag (2016) (17)
Mass production of Mn2+-doped CsPbCl3 perovskite nanocrystals with high quality and enhanced optical performance (2018) (17)
Supercapacitor electrode based on few-layer h-BNNSs/rGO composite for wide-temperature-range operation with robust stable cycling performance (2020) (17)
Preparations of titanium nitride, titanium carbonitride and titanium carbide via a two-step carbothermic reduction method (2019) (17)
Kinetics of Reduction of Titano-magnetite Powder by H2 (2013) (17)
An industrially feasible pathway for preparation of Mo nanopowder and its sintering behavior (2019) (17)
Fabrication of ultrafine W-Cu composite powders and its sintering behavior (2020) (17)
Investigation of the hydriding kinetic mechanism in the MgH2/Cr2O3-nanocomposite (2005) (17)
Some New Perspective on the Reaction Mechanism of MgO–SiO2–H2O System (2016) (17)
Investigation of the hydriding kinetic mechanism in the MgH2/Cr2O3-nanocomposite (2005) (17)
Structures and properties of Mg–La–Ni ternary hydrogen storage alloys by microwave-assisted activation synthesis (2014) (17)
An Insight into Slag Structure from Sulphide Capacities (2012) (17)
Measuring and Modeling of Density for Selected CaO-MgO-Al2O3-SiO2 Slag With Low Silica (2012) (17)
Electron-beam irradiation-hard metal-halide perovskite nanocrystals (2019) (17)
The Reaction Mechanism and Kinetics of α‐BN Powder in Wet Air at 1273 K (2013) (17)
Raman Structure Investigations of CaO-MgO-Al2O3-SiO2-CrOx and Its Correlation with Sulfide Capacity (2016) (17)
Oxidation mechanism of MAX phases (Ti3AlC2 powders) with and without Sn doping (2021) (16)
The oxidation kinetics of multi-walled carbon nanotubes (2010) (16)
Characterization of modified SiC@SiO2 nanocables/MnO2 and their potential application as hybrid electrodes for supercapacitors. (2015) (16)
Preparation of Mo nanoparticles through hydrogen reduction of commercial MoO2 with the assistance of molten salt (2019) (16)
Viscosity model for fully liquid silicate melt (2012) (16)
Feasibility study on the controlled hydriding combustion synthesis of Mg–La–Ni ternary hydrogen storage composite (2007) (16)
Microstructure and Thickness of 55 pct Al-Zn-1.6 pct Si-0.2 pct RE Hot-Dip Coatings: Experiment, Thermodynamic, and First-Principles Study (2012) (16)
Kinetic mechanisms of hydriding and dehydriding reactions in La–Mg–Ni alloys investigated by the modified Chou model (2016) (16)
High-performance La0·3Sr0·7Fe0·9Ti0·1O3-δ as fuel electrode for directly electrolyzing CO2 in solid oxide electrolysis cells (2020) (16)
Morphological development and oxidation of elongated β-SiAlON material (2011) (16)
A new approach to interpreting the parabolic and non-parabolic oxidation behaviour of hot-pressed β-SiAlON ceramics (2012) (16)
Kinetic study on carbothermic reduction of ilmenite with activated carbon (2017) (16)
Reduction Kinetics of FeTiO3 Powder by Hydrogen (2012) (16)
Synthesis of Al4SiC4 powders via carbothermic reduction: Reaction and grain growth mechanisms (2017) (16)
Oxidation mechanism of Fe–16Cr alloy as SOFC interconnect in dry/wet air (2013) (16)
Estimating ternary surface tension for systems with limited solubility (2005) (16)
Density functional theory study of hydrogenation mechanism in Fe-doped Mg(0 0 0 1) surface (2009) (16)
Experimental investigation and thermodynamic optimization of the Al–Zn–Ti system in the Al-rich corner (2013) (15)
Effects of MnO and CaO/SiO2 Mass Ratio on Phase Formations of CaOAl2O3MgOSiO2CrOx Slag at 1673 K and PO2=10−10 atm (2015) (15)
Thermal oxidation of SiAlON powders synthesized from coal gangue (2011) (15)
Calculation of density in a ternary system with a limited homogenous region using a geometric model (2005) (15)
High performance of Mo-doped La0.6Sr0.4Fe0.9Ni0.1O3-δ perovskites as anode for solid oxide fuel cells (2018) (15)
Investigation on Properties of Fluorine‐Free Mold Fluxes Based on CaO–Al2O3–B2O3 System (2017) (15)
Evolution of aluminum hydroxides at the initial stage of aluminum nitride powder hydrolysis (2016) (15)
Synthesis of Titanium Oxycarbide from Concentrates of Natural Ilmenite (Weathered and Unweathered) and Natural Rutile, Using a Methane-Hydrogen Gas Mixture (2017) (14)
A novel method to synthesize submicrometer vanadium carbide by temperature programmed reaction from vanadium pentoxide and phenolic resin (2017) (14)
Template free synthesis of highly ordered mullite nanowhiskers with exceptional photoluminescence (2015) (14)
Controllable Preparation of Al2O3-MgO·Al2O3-CaO·6Al2O3 (AMC) Composite with Improved Slag Penetration Resistance (2016) (14)
Effects of lanthanum addition on the microstructure and corrosion resistance of galvanized coating (2019) (14)
Hydriding kinetics of the La1.5Ni0.5Mg17–H system prepared by hydriding combustion synthesis (2004) (14)
Crystallization Kinetics of CaO-SiO2(CaO/SiO2=1)-TiO2-10 mass%B2O3 Glassy Slag by Differential Thermal Analysis (2015) (14)
Cluster/site approximation calculation of the ordering phase diagram for Cd–Mg alloys (2001) (14)
Interdiffusion in the Fe2O3-TiO2 system (2013) (14)
Hydrogen storage characterization of Mg17Ni1.5Ce0.5/5 wt.% Graphite synthesized by mechanical milling and subsequent microwave sintering (2013) (14)
Effects of inclusions on the resistance to pitting corrosion of S32205 duplex stainless steel (2018) (14)
Effects of step size and cut-off limit of residual liquid amount on solidification simulation of Al–Mg–Zn system with Scheil model (2009) (14)
The Formation and Growth of Sulfides in Free‐Cutting Stainless Steel (2018) (14)
Effect of Chlorine on the Viscosities and Structures of CaO-SiO2-CaCl2 Slags (2017) (14)
Solid state reaction studies in Fe3O4–TiO2 system by diffusion couple method (2013) (14)
Hydriding kinetics of the LaNiMg17-H system prepared by hydriding combustion synthesis (2004) (13)
Influence of TiO2 on viscosity of aluminosilicate melts (2014) (13)
Effect of Cerium on the Austenitic Nucleation and Growth of High-Mo Austenitic Stainless Steel (2020) (13)
Quantitative investigation of oxidation behavior of boron carbide powders in air (2013) (13)
Electrolytic preparation and characterization of VCr alloys in molten salt from vanadium slag (2019) (13)
Formation of Titanium Carbonitride via Carbothermic Reduction of Ilmenite Concentrate in Nitrogen Atmosphere (2016) (13)
An amperometric glucose enzyme biosensor based on porous hexagonal boron nitride whiskers decorated with Pt nanoparticles (2016) (13)
Calculation for density of molten slags using optical basicity (2013) (13)
Effects of CaO/SiO2 ratio and heat treatment parameters on the crystallization behavior, microstructure and properties of SiO2-CaO-Al2O3-Na2O glass ceramics (2020) (13)
Kinetics of carbothermic reduction of synthetic chromite (2014) (13)
Preparation of single-crystal spherical γ-Mo 2 N by temperature-programmed reaction between β-MoO 3 and NH 3 (2017) (13)
Deoxidation of Molten Steel by Aluminum (2015) (13)
Estimating the excess molar volume using the new generation geometric model (2009) (12)
Synthesis of Mo2C/MoC and Mo2C/MoC/MoP heterostructures supported on N-doped carbon as electrocatalyst for high-efficient hydrogen evolution reaction (2021) (12)
Single crystalline β-SiAlON nanowhiskers: preparation and enhanced properties at high temperature. (2012) (12)
Properties of Mg2NiH4 prepared by microwave-assisted activation synthesis from micro-particles (2009) (12)
Elements distribution and interfacial structure of CaO-SiO2-10mass% MnO under CO-CO2-SO2-Ar gas (2021) (12)
New method for viscosity estimation of slags in the CaO–FeO–MgO–MnO–SiO2 system using optical basicity (2010) (12)
Electrolysis of Molten FeOx-Containing CaO-Al2O3-SiO2 Slags under Constant Current Field (2015) (12)
Effect of Na2O on Dissolution Rate of Alumina in CaO–Al2O3–MgO–SiO2 Slag (2015) (12)
Structural and electrical properties of La2-xBaxMO2O9-x/2 (x = 0-0.18) (2010) (12)
Deoxidation of molten metals by short circuiting yttria-stabilized zirconia electrolyte cell (1994) (12)
Densification behavior of ultrafine W-Ni-Fe composite powders produced by a two-stage reduction process (2020) (12)
A novel process to prepare MoSi2 by reaction between MoS2 and Si (2017) (12)
Viscosity measurement of FeO–SiO2–V2O3–TiO2 slags in the temperature range of 1644–1791 K and modelling by using ion-oxygen parameter (2018) (12)
Density functional theory study on hydrogenation mechanism in catalyst-activated Mg(0001) surface (2009) (12)
Synthesis of titanium nitride nanopowder at low temperature from the combustion synthesized precursor and the thermal stability (2014) (12)
Determination and interpretation of the hydriding and dehydriding kinetics in mechanically alloyed LaNiMg17 composite (2005) (12)
Study on hydrogen reduction of Mo4O11 (2015) (12)
Influence of Ti(C0.3N0.7) on viscosity of blast furnace slags (2017) (12)
Synthesis and hydrogenation properties of Mg–3 mol%LaNi3 composite prepared under an external magnetic field (2007) (12)
Improved hydrogen storage properties of LiBH4 doped Li–N–H system (2014) (12)
Effect of hydrogen and carbon dioxide on the performance of methane fueled solid oxide fuel cell (2016) (11)
Study on reduction of MoS2 powders with activated carbon to produce Mo2C under vacuum conditions (2018) (11)
Calculation of the physicochemical properties for ternary solution with limited solubility (2018) (11)
Innovative method for minimization of waste containing Fe, Mn and Ti during comprehensive utilization of vanadium slag. (2021) (11)
Experimental investigation and thermodynamic assessment of Nd–H and Nd–Ni–H systems (2015) (11)
The mechanism of PVDF/CsPbBr3 perovskite composite fiber as self-polarization piezoelectric nanogenerator with ultra-high output voltage (2022) (11)
Effects of oxygen atmosphere, FeOx and basicity on mineralogical phases of CaO–SiO2–MgO–Al2O3–FetO–P2O5 steelmaking slag (2018) (11)
Size-controlled synthesis of high-purity tungsten carbide powders via a carbothermic reduction–carburization process (2019) (11)
Preparation and purification of titanium carbide via vacuum carbothermic reduction of ilmenite (2018) (11)
The effects of temperature and oxygen pressure on the initial oxidation of stainless steel 441 (2014) (11)
In-situ environmental transmission electron microscopy investigation of the phase transformation austenite → ferrite in duplex stainless steel (2020) (11)
Comparison of the Reaction Behavior of Hexagonal Silicon Carbide Powder in Different Atmospheres (2017) (11)
Non-isothermal reduction kinetics of titanomagnetite by hydrogen (2013) (11)
Large scale fabrication of dumbbell-shaped biomimetic SiC/SiO2 fibers (2015) (11)
Investigation of the effects of temperature and oxygen partial pressure on oxidation of zirconium carbide using different kinetics models (2011) (11)
Electrical conductivity of CaCl2–KCl–NaCl system at 1080 K (2012) (11)
The structural and kinetic characteristics of Mg1.9Al0.1Ni alloy synthesized by mechanical alloying (2006) (11)
Influences of Na2O and K2O Additions on Electrical Conductivity of CaO-SiO2-(Al2O3) Melts (2017) (11)
Effect of microwave irradiation on the hydrogen desorption properties of MgH2/LiBH4 composite (2014) (11)
Determination of Vanadium Valence State in CaO-MgO-Al2O3-SiO2 System By High-Temperature Mass Spectrometry (2013) (11)
Mixed Alkali Effect in Viscosity of CaO-SiO2-Al2O3-R2O melts (2020) (11)
Structure and Viscosity of CaO–Al2O3–B2O3 Based Mould Fluxes with Varying CaO/Al2O3 Mass Ratios (2020) (11)
Nanostructured oxide dispersion strengthened Mo alloys from Mo nanopowder doping with oxide nanoparticles (2019) (11)
Kinetics of Thermal Oxidation of Titanium Nitride Powder at Different Oxidizing Atmospheres (2011) (10)
Kinetics of non-isothermal oxidation of AlN powder (2010) (10)
The Model for Oxidation Kinetics of Titanium Nitride Coatings (2010) (10)
Removal of Copper from Molten Steel using FeO–SiO2–CaCl2 Flux (2013) (10)
Preparation of MoO2 by the Solid State Reaction Between MoS2 and MoO3 (2016) (10)
Improved dehydrogenation properties of Mg(BH4)2·2NH3 combined with LiAlH4 (2015) (10)
Synthesis of high purity nano-sized transition-metal carbides (2020) (10)
Effect of calcium content on inclusions during the ladle furnace refining process of AISI 321 stainless steel (2020) (10)
Study of the Reduction of Industrial Grade MoO3 Powders with CO or CO-CO2 Gases to Prepare MoO2 (2017) (10)
Molten salt synthesis of mullite nanowhiskers using different silica sources (2015) (10)
New insights into ternary geometrical models for material design (2020) (10)
Microstructural evolution and oxidation behavior of hot-dip 55 wt.% Al–Zn–Si coated steels (2015) (10)
Deoxidation of Molten Steel Using a Short‐Circuited Solid Oxide Electrochemical Cell (1995) (10)
Diffusion Coefficient of Calcium Ion in CaO-Al2O3-SiO2 Melts (2011) (10)
The crystal structure, microhardness and thermal stability of the Ti26Al55Zn19 alloy (2012) (10)
Modeling the Viscosity of Alumino‐Silicate Melt (2013) (10)
Electrical Conductivity and Electronic/Ionic Properties of TiOx-CaO-SiO2 Slags at Various Oxygen Potentials and Temperatures (2016) (10)
FeNi LDH/V2CTx/NF as Self-Supported Bifunctional Electrocatalyst for Highly Effective Overall Water Splitting (2022) (9)
A Comparison of Oxidation Kinetics of O′-SiAlON and β-SiAlON Powders Synthesized from Bauxite (2008) (9)
Application of Phenomenological Theory to Chemical Metallurgy (2018) (9)
Effect of ZrB2 addition on microstructure evolution and mechanical properties of 93 wt.% tungsten heavy alloys (2021) (9)
Industrial research on the high-temperature modification of Basic Oxygen Furnace slag with solid waste compound (2017) (9)
Study on reduction reaction of MoO2 powder with NH3 (2017) (9)
Kinetics of hydrogen absorption in the solid solution region for Laves phase Ho1−xMmxCo2 (x = 0, 0.2 and 0.4) alloys (2008) (9)
Preparation of SiS and SiO2 Nanospheres (2017) (9)
Effect of Agitation on Crystallization Behavior of CaO-Al2O3-SiO2-Na2O-CaF2 Mold Fluxes with Varying Basicity (2015) (9)
Morphological development and oxidation mechanisms of aluminum nitride whiskers (2010) (9)
Effect of solution annealing on the microstructure evolution and corrosion behavior of 2205 duplex stainless steel (2018) (9)
Iron oxide recovery from fayalite in water vapor at high temperature (2018) (9)
A short and facile process to synthesize WC-Co cemented carbides (2020) (9)
An insight into the viscosity prediction of ternary alloys with limited solubility (2019) (9)
Thermodynamic evaluation and experimental verification of the glass forming ability of Cu-Zr-based alloys (2021) (9)
Combustion characteristics and kinetics of anthracite with added chlorine (2017) (9)
Preparation of Fine-Grained W-Ni-Fe Alloys by Using W Nanopowders (2020) (9)
Dissolution and diffusion of TiO2 in the CaO-Al2O3-SiO2 slag (2014) (9)
Carbothermic reduction of Panzhihua ilmenite in vacuum (2017) (9)
Sulfide Capacities of CaO-MgO-Al2O3-SiO2-CrOx Slags (2016) (9)
Enhanced performance of La0.7Sr0.3Fe0.9Ni0.1O3 cathode by partial substitution with Ce (2017) (8)
Effects of CaO, MgO, Al2O3 and SiO2 on the carbothermic reduction of synthetic FeCr2O4 (2015) (8)
A low‐cost and efficient pathway for preparation of 2D MoN nanosheets via Na 2 CO 3 ‐assisted nitridation of MoS 2 with NH 3 (2019) (8)
A Novel Process to Synthesize High-Quality Ferrovanadium Nitride (2016) (8)
High speed steel produced by spray forming (2016) (8)
Calculation of rose diagrams (2007) (8)
Synthesis of High-Quality FeV55N Alloy by Carbonitrothermic Reduction of Vanadium Pentoxide–Ferric Oxide Mixture (2017) (8)
Formation of submicrometer titanium carbide from a titanium dioxide encapsulated in phenolic resin (2016) (8)
Performance of Ca-doped GdBa1-xCaxFe2O5+δ(x = 0, 0.1) as cathode materials for IT-SOFC application (2018) (8)
Investigation of Ti Addition Effects on the Thickness of 55 pct Al-Zn-1.6 pct Si Coating by First-Principles Calculation (2012) (8)
Reaction mechanisms for 0.5Li2MnO3·0.5LiMn0.5Ni0.5O2 precursor prepared by low-heating solid state reaction (2012) (8)
Formation of submicrometer titanium nitride from a titanium dioxide/phenolic resin composite (2017) (8)
Calculating activities from the phase diagram involving an intermediate compound using its entropy of formation (1987) (8)
Superior strength-ductility synergy in a novel tailored Zr-based particle-strengthened medium W content alloys (2022) (8)
A titanium nitride nanotube array for potentiometric sensing of pH. (2016) (8)
Viscosity Estimations of Multi‐Component Slags (2011) (8)
Preparation of Low-Carbon and Low-Sulfur Fe-Cr-Ni-Si Alloy by Using CaSO4-Containing Stainless Steel Pickling Sludge (2020) (8)
A theoretical analysis for oxidation of titanium carbide (2008) (8)
Pt-Co Alloys-Loaded Cubic SiC Electrode with Improved Photoelectrocatalysis Property (2017) (8)
A mathematical calculation of the hydriding characteristics of Mg2−xAxNi1−yBy alloy systems (2005) (8)
Deoxidation of Liquid Steel with Molten Slag by Using Electrochemical Method (2014) (8)
Calculation of Physicochemical Properties with Limited Discrete Data in Multicomponent Systems (2009) (8)
Kinetics of hydrogen absorption and desorption of a mechanically milled MgH2 + 5at% V nanocomposite (2006) (8)
Geometrical modelling of the physicochemical properties of CaO–Al2O3–CaF2 slag at 1873K (2020) (8)
Thermodynamics and Structure of CaO-Al2O3-3 Mass Pct B2O3 Slag at 1773 K (1500 °C) (2016) (8)
A facile pathway to prepare molybdenum boride powder from molybdenum and boron carbide (2020) (8)
Dissolution mechanism of Al2O3 in refining slags containing Ce2O3 (2016) (8)
Topography, structure, and formation kinetic mechanism of carbon deposited onto nickel in the temperature range from 400 to 850°C (2017) (8)
Solid-state Reaction Studies in Al 2 O 3 –TiO 2 System by Diffusion Couple Method (2017) (8)
Modification of interface chemistry and slag structure by transition element Cr (2021) (8)
A facile pathway to prepare VO2 and V2O3 powders via a carbothermal reduction process (2018) (8)
The calculation and application of R function in ternary systems (1987) (7)
High Cr(VI) adsorption capacity of rutile titania prepared by hydrolysis of TiCl4 with AlCl3 addition (2020) (7)
Pyrophoric behaviour of ultrafine Mo powder (2017) (7)
A new model for evaluating the electrical conductivity of nonferrous slag (2009) (7)
A novel method for preparing ultrafine molybdenum powder (2021) (7)
The Reaction Behavior of α-Si3N4 Powder at 1100–1500 °C Under Different Oxidizing Conditions (2015) (7)
Fabrication of pure V2O3 powders by reducing V2O5 powders with CO-CO2 mixed gases (2019) (7)
A facile pathway to prepare ultrafine WC powder via a carbothermic pre-reduction followed by carbonization with CH4-H2 mixed gases (2020) (7)
Oxidation resistance, thermal expansion and area specific resistance of Fe-Cr alloy interconnector for solid oxide fuel cell (2017) (7)
Interpretation of negative temperature dependence of hydriding reaction in LaNi5-Mg alloys by modified Chou model (2017) (7)
Effects of Cerium on Resistance to Pitting Corrosion of Spring Steel Used in Fasteners of High‐Speed Railway (2014) (7)
Effect of cobalt on the microstructure and hydrogen sorption performances of TiFe0.8Mn0.2 alloy (2020) (7)
Effect of atmosphere control on magnetic properties of CaO-Al2O3-SiO2-Fe3O4 glass ceramics (2020) (7)
Behavior of ceria as an actinide surrogate in electroslag remelting and refining slags (2001) (7)
Effects of Ti and Al addition on the Formation and Evolution of Inclusions in Fe-17Cr-9Ni Austenite Stainless Steel (2020) (7)
Calorimetric Investigations of the System Pb-Bi-Mg-Sb with Oelsen's Method. Part 2. Comparison of experimentally obtained values for lead activity with results of thermodynamic predicting (2001) (7)
Interfacial Rate of CO2–CO Reaction with the Solid Iron and Iron Oxide by Isotope Exchange Technique at 1273 K (2012) (7)
Trifunctional electrocatalysts based on feather-like NiCoP 3D architecture for hydrogen evolution, oxygen evolution, and urea oxidation reactions (2022) (7)
Microwave-assisted synthesis and characterization of Nd 1.5Mg 17Ni 0.5–Fe 3O 4 hydrogen storage composite (2011) (7)
Phase evolution and reaction mechanism during reduction–nitridation process of titanium dioxide with ammonia (2017) (7)
A New Route to Produce Submicron Mo Powders via Carbothermal Pre-reduction Followed by Deep Magnesium Reduction (2018) (7)
Thermodynamic assessment of Mg−Ni−Y system focusing on long-period stacking ordered phases in the Mg-rich corner (2021) (7)
Estimating ternary viscosity in terms of Moelwyn-hughes' model (2001) (7)
Mechanism of Metastable Wüstite Formation in the Reduction Process of Iron Oxide below 570 (2016) (7)
Enhancement of the mechanical properties of ultrafine-grained WC-Co cemented carbides via the in-situ generation of VC (2022) (7)
Melting Temperature of a Selected Area in CaO-MgO-Al2O3-SiO2 Slag System (2011) (7)
A self-consistent model for predicting interaction parameters in multicomponent alloys (1999) (7)
Fabrication and Mechanical Properties of Mo-Al2O3 Cermets by Using Ultrafine Molybdenum and Nano-sized Alumina Powders (2021) (7)
Investigation the influences of B2O3 and R2O on the structure and crystallization behaviors of CaO–Al2O3 based F-free mold flux (2018) (7)
Calculation and Analysis of Sulfide Capacities for CaO-Al2O3-SiO2-MgO-TiO2 Slags (2013) (7)
A Model for the Reduction of Metal Oxides by Carbon Monoxide (2018) (7)
Morphological Evolution of Low-Grade Silica Fume at Elevated Temperature (2017) (7)
Effects of R2CO3 (R = Li, Na and K) on the reduction of MoO2 to Mo by hydrogen (2017) (6)
Cluster-assisted nucleation mechanism of titanium oxides in Fe-Ti supercooled alloys (2018) (6)
Evolution of Inclusions in Fe-13Cr Treated by CaO-SiO2-Al2O3-Based Top Slag (2017) (6)
Preparation of Mo2C by reducing ultrafine spherical β-MoO3 powders with CO or CO-CO2 gases (2018) (6)
Preparation of Vanadium Nitride by Magnesiothermic Reduction of V2O3 in Nitrogen Atmosphere (2018) (6)
Low-temperature synthesis of single-phase refractory metal compound carbides (2021) (6)
Effect of Temperature on the Initial Oxidation Behavior and Kinetics of 5Cr Ferritic Steel in Air (2018) (6)
Microstructure and mechanical properties of Al2O3 dispersed fine-grained medium heavy alloys with a superior combination of strength and ductility (2021) (6)
Grain Refinement Behavior of Al-Zn-Si Alloy by Inoculation in Hot-Dip Coating (2015) (6)
Electronic/Ionic Properties of FexO–SiO2–CaO–Al2O3 Slags at Various Oxygen Potentials and Temperatures (2015) (6)
Viscosity and Structure Changes of CaO-SiO2-Al2O3-CaF2 Melts with Substituting A12O3 for SiO2 (2016) (6)
Dissolution Behavior of Al2O3 in Refining Slags Containing Ce2O3 (2014) (6)
Effect of B2O3 on Slag-Metal Reaction between CaO-Al2O3-Based Mold Flux and High Aluminum Steel (2018) (6)
Effect of SiO 2 addition on the synthesis of hercynite with high purity (2015) (6)
Thermodynamic prediction of martensitic transformation temperature in Fe-C-X (X=Ni, Mn, Si, Cr) systems with dilatational coefficient model (2021) (6)
Effects of pretreatment of substrates on the preparation of large scale ZnO nanotube arrays (2010) (6)
Mixed alkali effect in SiO2-CaO-Al2O3-TiO2-R2O (R = Li, Na) glass ceramics (2021) (6)
Improvement in surface-enhanced Raman spectroscopy from cubic SiC semiconductor nanowhiskers by adjustment of energy levels. (2016) (6)
Calcium Treatment for FeSi-killed Fe-13 Pct Cr Stainless Steel with Various Top Slag Compositions (2018) (6)
Hydrogen Storage Properties of Graphite-Modified Mg-Ni-Ce Composites Prepared by Mechanical Milling Followed by Microwave Sintering (2012) (6)
Improved hydrogen desorption properties of Li-N-H system by the combination of the catalytic effect of LiBH4 and microwave irradiation (2018) (6)
Topochemical synthesis of holey 2D molybdenum nitrides nanosheets via lime-assisted nitridation of layered MoS2 (2020) (6)
Influences of Different Components on Agglomeration Behavior of MoS2 During Oxidation Roasting Process in Air (2016) (6)
Effect of NaCl on synthesis of ZrB2 by a borothermal reduction reaction of ZrO2 (2019) (6)
Corrosion resistance of AlN–SiC–TiB2 composite in air (2009) (6)
Effect of high-valence elements doping at B site of La0.5Sr0.5FeO3-δ (2021) (5)
Comparison of Different Calculation Methods of the New Generation Geometric Model in Predicting the Density of NaCl–MgCl2–CaCl2 Systems (2014) (5)
INFLUENCE OF TEMPERATURE AND PRESSURE ON THE KINETICS OF Mg-6mol%LaNi PREPARED BY HYDRIDING COMBUSTION SYNTHESIS (2006) (5)
Preparation of high quality ferrovanadium nitride by carbothermal reduction nitridation process (2017) (5)
Preparation of α‐Si 3 N 4 by direct nitridation using polysilicon waste by diamond wire cutting (2019) (5)
Synthesis of β-SiAlON whiskers: dependence of uniform morphology upon preparation conditions (2013) (5)
A facile route to prepare ODS WC Co cemented carbides (2021) (5)
Estimation of Various Properties of CaO–“FeO”–SiO2 System at 1,673 K by Mass Triangle Model (2017) (5)
Reduction of synthetic stainless steel slags by aluminium (2019) (5)
Highly efficient polyoxometalate-based catalysts for clean-gasoline synthesis (2015) (5)
Preparation of High-Quality FeV55N Using Ammonia as a Reductant and Nitrogen Source (2018) (5)
Corrosion Process of Stainless Steel 441 with Heated Steam at 1,000 °C (2017) (5)
The Effect of Water Vapor and Temperature on the Reaction Behavior of AlN Powder at 1273 K to 1423 K (1000 °C to 1150 °C) (2015) (5)
Synthesis of submicrometric VB2 powders by a boro-carbothermal reduction route (2019) (5)
The Mechanism of Dross Formation during Hot-dip Al-Zn Alloy Coating Process (2013) (5)
Preparation of high-purity and ultrafine WC-Co composite powder by a simple two-step process (2020) (5)
Estimating Electrical Conductivities of CaO-MgO-Al2O3-SiO2 Using Ion-Oxygen Parameter (2016) (5)
Study on the reduction of commercial MoO 3 with carbon black to prepare MoO 2 and Mo 2 C nanoparticles (2020) (5)
Modeling and Scaleup of Galvanic Deoxidation of Molten Metals Using Solid Electrolyte Cells (2005) (5)
Evolution of Inclusions after Cerium and Titanium Addition in Aluminum Deoxidized Fe-17Cr-9Ni Austenitic Stainless Steel (2020) (5)
Recovery and separation of Fe and Mn from simulated chlorinated vanadium slag by molten salt electrolysis (2020) (5)
Calculation of Two-Dimensional Sections of Liquidus Projections in Multicomponent Systems (2008) (5)
Effectively controlling the crystal growth of Cr 2 O 3 using SiO 2 as the second phase (2018) (5)
Preparation of low binder WC-Co-Ni cemented carbides with fine WC grains and homogeneous distribution of Co/Ni (2021) (5)
Controllable syntheses of Mo5Si3 and Mo3Si by silicothermic reduction of MoS2 in the presence of lime (2021) (4)
Fabrication and characterization of ultra light SiC whiskers decorated by RuO2 nanoparticles as hybrid supercapacitors (2016) (4)
Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction (2006) (4)
Dripping and evolution behavior of primary slag bearing TiO2 through the coke packed bed in a blast-furnace hearth (2017) (4)
Estimating sulfide capacities for ternary systems with limited solubility (2012) (4)
Synergetic Modification of Industrial Basic Oxygen Furnace Slag and Copper Slag for Efficient Iron Recovery (2022) (4)
Incorporation of Chlorine in a Secondary Steelmaking Slag Based on the CaO-Al2O3-SiO2 System (1996) (4)
Kinetic study on the reaction between CO2-CO and wustite using the isotope exchange method (2013) (4)
Removal of boron from metallurgical grade silicon by CaO-SiO2 based slags (2019) (4)
A novel sulfur‐emission free route for preparing ultrafine MoSi 2 powder by silicothermic reduction of MoS 2 (2021) (4)
Effects of Ti addition on microstructure and the associated corrosion behavior of a 22Cr‐5Ni duplex stainless steel (2021) (4)
A note on the application of the phase rule (2008) (4)
Comparison of boundary interpolation methods on the geometrical modeling of viscosity for CaO-Al2O3-SiO2 melts (2021) (4)
The Reaction Behavior of AlN Powder in Wet Air Between 1573 K and 1773 K (2016) (4)
Gasification Characteristics and Kinetics of Coke with Chlorine Addition (2017) (4)
Preparation and UV property of size-controlled monodisperse nickel nanoparticles (<10 nm) by reductive method (2013) (4)
Kinetics of Synthesis of Ba1.0Co0.7Fe0.2Nb0.1O3–δ through Solid-Solid Reaction (2008) (4)
Activities and ternary phase diagrams (1997) (4)
Dehydriding reaction kinetic mechanism of MgH2-Nb2O5 by Chou model (2008) (4)
Dehydriding reaction kinetic mechanism of MgH2-Nb2O5 by Chou model (2008) (4)
Phase Relations in CaO-SiO2-Al2O3-15 mass pct CaF2 System at 1523 K (1250 °C) (2014) (4)
Influence of particle size distribution on oxidation behaviour of β-SiAlON powder (2009) (4)
Thermodynamic Analysis of the Corrosion of Fe-16Cr Alloy Interconnect of Solid Oxide Fuel Cell under Various Atmospheres (2014) (4)
Electrochemical determination of thermodynamic properties of intermediate compound in Mo-O system (1986) (4)
Preparation of industrial grade MoO2 by the reaction between industrial grade MoO3 and activated carbon (2018) (4)
[O68] Comparison of Muggianu model,Toop model and General solution model for predicting the thermodynamic properties of Mg-Al-Zn system (2015) (4)
Quantitative interpretation of parabolic oxidation behaviour of nitride powders (2009) (3)
Synthesis of high-quality ferrovanadium nitride by carbothermal reduction nitridation method (2020) (3)
Determination of Viscosity and Surface Tension for CaO–SiO2–CaF2 Slags (2020) (3)
Preparation and properties of Al2O3 dispersed fine-grained W-Cu alloy (2022) (3)
Study on Oxidation Behavior of Industrial BOF Slag and Recovery of Magnetic Slag (2021) (3)
Reaction between CO2–O2 Mixture Gas and Fe–C Melts by Isotope Tracing Method (2020) (3)
Semiconducting Behavior of Carbon Steel in Electrolyte Solution (2008) (3)
Hydriding kinetics of the La1.5Ni0.5Mg17–H system prepared by mechanical alloying (2004) (3)
Microstructure and Oxidation of 55%Al-Zn-Si Hot-Dip Coatings Deposited on Low Carbon Steel at High Temperature (2011) (3)
Carbon dioxide absorption and desorption properties of Ba 3 Al 2 O 6 (2016) (3)
Topochemical synthesis of one-dimensional Mo2C nanobelts (2020) (3)
Desulfurizer-Enhanced Carbothermal Reduction of MoS2 to Synthesize Mo2C (2020) (3)
Topochemical synthesis of two-dimensional molybdenum carbide (Mo2C) via Na2CO3-Assited carbothermal reduction of 2H–MoS2 (2020) (3)
Influences of Na2O, K2O and Li2O Additions on Electrical Conductivity of CaO–SiO2–(Al2O3) Melts (2019) (3)
Fabrication and Characterization of Tungsten Heavy Alloys with High W Content by Powder Metallurgy (2022) (3)
Preparation of nano-scaled WC powder by low-temperature carbothermic reduction method (2022) (3)
Effect of Al 2 O 3 /SiO 2 mass ratio on viscosity of CaO-Al 2 O 3 -SiO 2 -CaF 2 slag (2015) (3)
First principles application for mechanical properties of Ti-doped W particles enhanced U matrix composite (2018) (3)
Size-controlled synthesis of Mo powders via hydrogen reduction of MoO2 powders with the assistance of Mo nuclei (2020) (3)
Effects of specific surface area of metallic nickel particles on carbon deposition kinetics (2018) (3)
Low temperature synthesis of titanium diboride nanosheets by molten salt–assisted borothermal reduction of TiO2 (2019) (3)
Effect of Water-Vapor Content on Reaction Rate of Hexagonal BN Powder at 1273 K (2013) (3)
A study of relative stability (1989) (3)
Hydrogenation mechanism in lanthanum-activated magnesium films (2011) (3)
Estimation of viscosity for some silicate ternary slags (2014) (3)
Preparation of high quality FeV65N by carbonitrothermic reduction of V2O5 and Fe2O3 (2019) (3)
Direct carbothermic reduction of ilmenite concentrates by adding high dosage of Na2CO3 in microwave field (2021) (3)
SYNTHESIS, PHASE TRANSFORMATION AND MECHANICAL PROPERTY OF SiAlON CERAMICS FROM COAL GANGUE (2014) (3)
Kinetic analysis of Mg–8 mol%LaNi0.5 composite (2007) (3)
A New Method for Evaluating Some Thermophysical Properties for Ternary System (2008) (3)
Preparation of Ultrafine W Powder via Carbothermic Prereduction of Tungsten Oxide Followed by Deep Reduction with Hydrogen (2020) (3)
Recovery of high-grade copper matte by selective sulfurization of CuO–Fe2O3–SiO2–CaO system (2021) (3)
Competitive Oxidation of O2 and CO2 in Fe–C Melts Using Isotope Tracing Method (2020) (3)
Effects of B 2 O 3 and TiO 2 on crystallization behavior of some slags in Al 2 O 3-CaO-MgO-Na 2 OSiO 2 system (2012) (3)
CaO-Assisted Carbothermal Reduction of MoS2 to Synthesize Molybdenum Powder (2021) (2)
Selective Chlorination Reaction of Cu2O and FeO Mixture by CaCl2 (2013) (2)
Electrochemical properties of La0.5Sr0.5Fe0.95Mo0.05O3−δ as cathode materials for IT-SOEC (2021) (2)
Structural Studies of CaO-B2O3-TiO2 Glass System by Raman Spectroscopy (2011) (2)
Kinetics for gas–solid reactions involving dual-reaction interfaces (2015) (2)
The morphological evolution of the oxide products of Si3N4/Al2O3 composite refractory under different oxidizing conditions (2017) (2)
Mg-Ni-H Hydrogen Storage System Prepared by Controlled Hydriding Combustion Synthesis (2011) (2)
Reaction Behavior of SiC with CaO–SiO2–Al2O3 Slag (2021) (2)
A Sulfur Emission-Free Route for the Synthesis of Mo and Mo2C via Carbothermal Reduction of MoS2 (2021) (2)
A new treatment for determining the activities from ternary miscibility gap: The O-Cu-Pb system (1988) (2)
Effect of Si on Desulfurization in Fe–Si–S, Fe–Si–Cr–S and Fe–Si–Ni–S Melts (2020) (2)
Density of CaO‐5%MgO‐Al2O3‐SiO2 Slag with Low Silica (2013) (2)
Morphology-controlled Synthesis of Hexagonal AlN Whiskers by Direct Nitridation of Aluminum and Alumina Mixture (2014) (2)
Boron doping induced thermal conductivity enhancement of water-based 3C-Si(B)C nanofluids (2018) (2)
Comparison of hot pressing sintering and conventional powder-sintering in preparation of CaO-Al2O3-SiO2-Fe3O4-R2O glass ceramics (2021) (2)
Estimation for Iron Redox Equilibria in Multicomponent Slags (2017) (2)
An effective process for simultaneous extraction of valuable metals (V, Cr, Ti, Fe, Mn) from vanadium slag using acidic sodium chlorate solution under water bath conditions (2018) (2)
Carbon deposition in porous nickel/yttria-stabilized zirconia anode under methane atmosphere (2019) (2)
Reduction kinetics of lead-rich slag with carbon in the temperature range of 1073 to 1473K (2013) (2)
Estimating the density and molar volume of ferrite-based ternary molten slags by geometrical model (2021) (2)
A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique (2009) (2)
Kinetics Study on Reduction of CaWO4 by Si from 1423 K to 1523 K (2015) (2)
Reply to "Comment on 'Superior Photodetectors Based on All-Inorganic Perovskite CsPbI3 Nanorods with Ultrafast Response and High Stability'". (2018) (2)
Preparation of submicron Mo powders by the reaction between MoO2 and activated carbon (2018) (2)
Reaction Kinetics of Fe2O3 and BaCO3 to Prepare Ba2Fe2O5 (2014) (2)
Effect of ozone on the performance of solid oxide fuel cell with Sm0.5Sr0.5CoO3 cathode (2014) (2)
Determination of the Rate of CO2–CO Reaction with Magnetite by Isotope Exchange Technique (2012) (2)
Fe Content Effects on Electrochemical Properties of 0.3Li2MnO3•0.7LiMnxNixFe(1-2x)/2 O2 Cathode Materials (2011) (2)
Measuring and Modeling Viscosity of CaO-Al 2 O 3-SiO 2 (-K 2 O ) Melt (2012) (2)
Relationship between activity and three phase boundary in the ternary phase diagram (1999) (2)
Structural predictions based on the compositions of cathodic materials by first-principles calculations (2015) (2)
Experimental Investigation of the Phase Equilibria of Al-Zn-Ti System in Al-Rich Corner at 400 °C (2011) (2)
Dependence of the standard thermodynamic properties of isomer groups of benzenoid polycyclic aromatic hydrocarbons on carbon number (1990) (2)
Preparation technology of Ti-rich material from ilmenite via method of vacuum carbothermal reduction (2018) (2)
USING Ce TO MODIFY INCLUSION IN SPRING STEEL (2017) (2)
ACTIVITIES ON BOUNDARIES OF TWO-PHASE REGION IN TERNARY SYSTEMS (1978) (1)
In-Situ and Ex-Situ Investigation of Deformation Behaviors of a Dual-Phase Mg−Ni−Y Alloy (2023) (1)
Evaluation of the thermodynamics and kinetics of catalytic steam reforming over SOFC anode materials (1995) (1)
A new thermodynamic approach for determining the activities from ternary miscibility gaps: the Cu-Pb-O system (1998) (1)
Thermodynamic Modeling of CaO-CaF2 and CaO-SiO2 Systems (2014) (1)
Reaction kinetics of BN powder in high-temperature water vapor (2013) (1)
Effect of vacuum heat treatment on microstructure evolution and mechanical properties of 93W-4.9Ni-2.1Fe-(ZrB2) alloys (2022) (1)
Large Scale Fabrication of Dumbbell-shaped Biomimetic SiC / SiO 2 Fibers (2015) (1)
Seeded growth synthesis of W nanoparticles in reduction process of WO2 by hydrogen (2020) (1)
Model for calculating physicochemical properties of aluminosilicate melt (2013) (1)
An Investigation of Electro-deoxidation Process for Producing Titanium from Dense Titanium Dioxide Cathode (2013) (1)
Liquidus Temperature of Mould Fluxes in Casting of Ti-stablized Stainless Steel (2013) (1)
Optimization Rule of Anode Materials for Solid Oxide Fuel Cells (2015) (1)
Influences of different components on viscosities of CaO-MgO-Al2O3-SiO2 melts (2014) (1)
Preparation of fully dense and magnetically controllable CaO-Al2O3-SiO2-Na2O-Fe3O4 glass ceramics by hot pressing (2021) (1)
A model for estimating the rate constant between CO2-CO gas and molten slag containing iron oxides using optical basicity (2012) (1)
Effect of Acid Treatment on Electrocatalytic Performance of PtNi Catalyst (2020) (1)
Effects of Ti on Electronic Structure and Mechanical Property of Uranium: a First-Principles Study (2012) (1)
Ionization behavior of deep level donors in passive film formed on surface of stainless steel in 5% salt solution (2010) (1)
Effect of Water Rinsing Temperature for Steel Substrate on Corrosion Behavior of Hot-Dip Aluminizing Coatings (2010) (1)
Effect of Al2O3 Content in Top Slag on Cleanness of Stainless Steel Fe‐13Cr (2016) (1)
DISSOLUTION MECHANISM OF Al 2 O 3 IN REFINING SLAGS CONTAINING Ce 2 O 3 (2016) (1)
The Hot Deformation Behavior of Spray-Formed High Speed Steel (2017) (1)
Representation of standard chemical thermodynamic properties of isomer groups by equations (1990) (1)
The reaction behavior of MoSi2 powder in N2 atmosphere at high temperatures (2017) (1)
Calculation of physicochemical properties in molten melts (2012) (1)
Study on Oxidation Behavior of Industrial Basic Oxygen Furnace Slag and Recovery of Magnetic Iron‐Containing Phase (2022) (1)
A new kinetic treatment of the oxidation of β-SiAlON powder (2008) (1)
Crystallization characteristics of B2O3 and TiO2-bearing glassy fluoride-free mold fluxes (2020) (1)
Estimating phosphate capacities of multi-component slags by mass triangle model (2017) (1)
Kinetics of Reduction of Titano-magnetite Powder (2013) (1)
Electroreduction Kinetics for Molten Oxide Slags (2007) (1)
Effects of various rare earth oxides on morphology and size of oxide dispersion strengthening (ODS)-W and ODS-Mo alloy powders (2020) (1)
Basicity Contributions to Interfacial Structure and Oxygen Potential of CaO–MnO–SiO2 slag (2022) (1)
Electrical Conductivities of High Aluminum Blast Furnace Slags (2019) (1)
Decomposition mechanisms and non-isothermal kinetics of LiHC2O4·H2O (2012) (1)
Thermodynamic Study on Solubility of Nitrogen in Fe–Mn–Al Alloy Melts (2017) (1)
Experimental Study on Electrical Conductivity of FexO-CaO-SiO2-Al2O3 System at Various Oxygen Potentials (2018) (1)
Ultra-stable and bifunctional free-standing SiC photoelectrocatalyst for water remediation (2023) (1)
Preparation and oxidation characteristics of ZrC-ZrB2 composite powders with different proportions (2021) (1)
Research on Reaction between SiC and Fe 2 O 3 (2018) (1)
Synthesis of High-Quality FeV55N Alloy by Carbonitrothermic Reduction of Vanadium Pentoxide–Ferric Oxide Mixture (2017) (0)
Reduction Kinetics of FeTiO 3 Powder by Hydrogen (2010) (0)
Quantitative investigation of the oxidation kinetics of magnesia/carbon composite (2009) (0)
Morphological Development of AlN Powder in Wet Air Between 1273 and 1773 K (2015) (0)
Controllable Conduction Band-Edge Reconfiguration in Quasi-2D Perovskites Enabled by Dimensional Engineering for Encouraging Electron-Hole Separation (2023) (0)
Effect of Oxygen to Alumina Ratio on the Viscosity of Aluminosilicate and Aluminate Systems (2011) (0)
General solution model and its new progress (2022) (0)
Application of surface tension in the design of novel Sn-Ag-Cu-based solders (2022) (0)
Synthesis of high-quality ferrovanadium nitride by carbothermal reduction nitridation method (2020) (0)
Mechanism and kinetics of decomposition reaction of ultrafine ammonium molybdate for preparing ultrafine MoO3 powder (2023) (0)
Valuable metals recovery and vitrification of chromium-containing electroplating sludge (2022) (0)
The effect of different atmospheres on the corrosion behavior and kinetics of porous silicon nitride ceramics at 1200 oC (2016) (0)
The Ninth International Conference on Molten Slags, Fluxes and Salts (MOLTEN 12), May 27–30, 2012 in Beijing, China (2013) (0)
Effect of Alloy Addition on Mechanical Properties and Decarburization Sensitivity of Spring Steel (2012) (0)
Slag structure information derived from sulphide capacities (2012) (0)
Improved Hydrogen Storage Properties of Mg(BH4)2-Mg(AlH4)2 Combined Systems (2015) (0)
High speed steel produced by spray forming (2016) (0)
Reaction behavior and kinetics of hexagonal SiC powder at 1100-1500 oC under different atmospheres (2016) (0)
Thermodynamic and Experimental Studies of Chlorination Reaction of FeO-Cu2O System (2014) (0)
Calculation of Activation Energy in Multiphase Reaction (2012) (0)
Design of Heat-Dissipating Mg–La–Zn Alloys Based on Thermodynamic Calculations (2020) (0)
Phase equilibria in CaO–B2O3–TiO2 system at 1373 K and 1473 K (2013) (0)
The factors affecting the thermophysical properties of slags and glasses (2012) (0)
Effect of Calcium Content on Inclusions during LF Refining Process of AISI 321 Stainless Steel (2020) (0)
Contribution of Ti Addition to the Electronic Structure and Adhesion at the Fe2Al5/Fe Interface in 55%A1‐Zn Coating (2012) (0)
Carbon dioxide absorption and desorption properties of Ba3Al2O6 (2016) (0)
Hydriding kinetics of the La 1.5 Ni 0.5 Mg 17 H system prepared by mecha (2004) (0)
A New Treatment for the Kinetics of Isothermal Oxidation of Zinc Powders (2013) (0)
Erosion Layer Growth between Solid 316L Stainless Steel and Al–Li Alloy Melt (2022) (0)
The mechanism of dross formation in the hot-dip 55 wt . % Al-Zn-Si coating process (2012) (0)
Preparation and properties of diopside-based CaO-MgO-Al2O3-SiO2 glass-ceramic using biomass fly ash (2023) (0)
Dissolution Behavior of Al 2 O 3 in Refining Slags Containing Ce 2 O 3 (2010) (0)
High efficiency extractions of V, Cr, Ti, Fe and Mn from vanadium slag by microwave heating (2021) (0)
Fabrication of titanium carbide reinforced iron matrix cermet by vacuum carbothermal reduction of ilmenite (2019) (0)
Application of Surface Effect on Metallurgical Processes (2017) (0)
Preparation of Hexagonal BN Whiskers Synthesized at Low Temperature and Their Application in Fabricating an Electrochemical Nitrite Sensor. (2016) (0)
Insight into the oxidation mechanisms of vanadium slag and its application in the separation of V and Cr (2023) (0)
First-Principles Study of Mechanical Property and Electronic Structure of Quenching and Aging U-Ti Alloy (2013) (0)
CO2 selective oxidation of vanadium from vanadium slag during CaCO3 roasting treatment (2023) (0)
EFFECT OF TITANIUM ON DROSS FORMATION IN HOT-DIP 55%AL-ZN-SI-LA BATH (2015) (0)
PREDICTION OF PHYSICOCHEMICAL PROPERTIES IN MULTICOMPOENT MOLTEN SYSTEM (2009) (0)
A NEW APPLICATION OF ZrO2 SOLID ELECTROLYTE (2000) (0)
Thermodynamic Interactions of Si and Ti in Liquid Cu (2012) (0)
Fabrication of Semiconductor with Modified Microstructure for Efficient Photocatalytic Hydrogen Evolution Under Visible Light (2016) (0)
Thermodynamic Interactions of Si and Ti in Liquid Cu (2012) (0)
Composition Regulation Prediction of Cathode Materials By First-Principles Calculation (2014) (0)
Reduction kinetics of lead-rich isasmelt slag at the temperature range of 1073 to 1473 K (2012) (0)
Preparation of zirconium diboride by reduction of zirconia with calcium hexaboride (2022) (0)
WC-VC/Cr3C2 composite powders prepared by a carbothermic reduction-carburization process (2022) (0)
Preparation of High-Quality FeV55N Using Ammonia as a Reductant and Nitrogen Source (2018) (0)
DISSOLUTION MECHANISM OF Al2O3 IN REFINING SLAGS (2016) (0)
Controllable synthesis of Mo2C with different morphology and application to electrocatalytic hydrogen evolution reaction (2021) (0)
Calculating activities from the phase diagram involving an (1987) (0)
Kinetics of Stainless Steel 441 Initial Oxidation at 600~950oC in Different Oxygen Pressures (2013) (0)
Development and Characterization of a Novel Fine-Grained W–Ni–Mn–Mo Alloys with La2O3 Addition Prepared Via Low-Temperature Sintering (2022) (0)
Simultaneous enhancements of strength and hardness for fine-grained W-NiFeCoCrMn composites (2023) (0)
Preparation of Ni–Fe–S Matte from Nickeliferous Laterite Ore Using CaS as the Sulfurization Agent (2022) (0)
Size-controlled preparations of tungsten and molybdenum borides in calcium or aluminum melt (2022) (0)
Functionalisation of nitride whiskers: synthesis, underlying mechanism and potential applications as membrane filters (2012) (0)
Study on the separation of silicon from refining slag of industrial silicon (2021) (0)
Electroslag Remelting (ESR) Slags for Removal of Radioactive Oxide Contaminants from Stainless Steels (1999) (0)
A New Route to Produce Submicron Mo Powders via Carbothermal Pre-reduction Followed by Deep Magnesium Reduction (2018) (0)
The Reaction Behavior of AlN Powder in Wet Air Between 1573 K and 1773 K (2015) (0)
Fabrication of magnetically controllable glass ceramics with completely dense microstructure by hot pressing (2021) (0)
B-doped 3 C-SiC (2015) (0)
Surface tension of selected CaO-MgO-Al 2 O 3-SiO 2 slag with low silica content (2012) (0)
Preparation of Ultrafine W Powder via Carbothermic Prereduction of Tungsten Oxide Followed by Deep Reduction with Hydrogen (2019) (0)
High Anticorrosive Properties of Hot-Dip 55 wt% Al-Zn-Si Coatings on Q235 Steel (2010) (0)
Oxidative modification of industrial basic oxygen furnace slag for recover iron-containing phase: Study on phase transformation and mineral structure evolution (2023) (0)
On the Characterization of La1.5Mg17Ni0.5 Composite Materials Prepared by Hydriding Combustion Synthesis. (2004) (0)
Changes of Particle Size and Morphology of Prepared W/Mo Powders during Hydrogen Reduction Process with the Addition of ROH (R = Li, Na, K) (2023) (0)
Direct Alloying of Silicon in Liquid Steel by Molten Slag Electrolysis (2016) (0)
Effect of Continuous Cooling Rate on Microstructural Transformation of 60Si2CRVAT Spring Steel (2013) (0)
Activity and Phase Diagram (2010) (0)
Recovery of Ni matte from Ni-bearing electroplating sludge. (2022) (0)
Refined Microstructure and Enhanced Mechanical Properties of 93W–4.9Ni–2.1Fe–1La2O3 Alloy Fabricated by a Two-Stage Sintering Process (2022) (0)
CONTINUOUS CALCULATION OF ACTIVITIES FROM A SINGLE-PHASE REGION TO ATWOPHASE REGION IN A TERNARY SYSTEM AND ITS VERIFICATION (1984) (0)
Study on Electrical Conductivity of CaO‐SiO2‐Al2O3‐FeOx Slags (2016) (0)
Effect of Ni/Fe ratio on activation sintering and mechanical properties of molybdenum nickel iron alloy (2022) (0)
Bifunctional hierarchical NiCoP@FeNi LDH nanosheet array electrocatalyst for industrial-scale high-current-density water splitting (2023) (0)
Selective Extraction and Separation of Titanium from Vanadium Slag and Preparation of TiO2 (2020) (0)
Phase Evolution During the Oxidation Process of Low Grade Lead–Zinc Oxide Ore (2020) (0)
Understanding of Cr-Containing Slags by Sulphide Capacity and Structural Study (2016) (0)
Preparation of rare earth borides by reaction among rare earth oxides, boron carbide, and calcium (2022) (0)
Thermodynamic and Kinetic Properties of La20.5MgNi78.5 and La15.5Mg6Ni78.5 Hydrogen Storage Alloys: The Theoretical Models and Their Verifications (2016) (0)
Dissolution Reaction of Earthy Graphite in Liquid Steel (2019) (0)
Experimental investigation and thermodynamic assessment of La–Y–Ni ternary system in Ni-rich corner (2022) (0)
An Experimental Study of Viscosity in FeO-SiO2-V2O3-TiO2 System (2016) (0)
A new way of making Buky onion by thermal decomposition of SiC nanometer powder under vacuum (in Chinese) (1998) (0)
Preparation of MoO2 by the Solid State Reaction Between MoS2 and MoO3 (2015) (0)
Mechanism of Selective Chlorination of Fe from Fe2SiO4 and FeV2O4 Based on Density Functional Theory (2023) (0)
An Empirical Model for Estimating Density of Multicomponent System Based on Limited Data (2009) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Kuo–chih Chou?

Kuo–chih Chou is affiliated with the following schools:

University of Science and Technology Beijing
University of Pennsylvania
Shanghai University
Massachusetts Institute of Technology