Mohammad Golam Rasul

Mohammad Golam Rasul's AcademicInfluence.com Rankings

Chemistry

#4738

World Rank

#5825

Historical Rank

Chemical Engineering

#624

World Rank

#644

Historical Rank

chemistry Degrees

Download Badge

Chemistry

Mohammad Golam Rasul's Degrees

PhD Chemical Engineering University of California, Berkeley
Masters Chemical Engineering Stanford University

Why Is Mohammad Golam Rasul Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Mohammad Golam Rasul's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Biofuels Production through Biomass Pyrolysis —A Technological Review (2012) (981)
Influence of parameters on the heterogeneous photocatalytic degradation of pesticides and phenolic contaminants in wastewater: a short review. (2011) (708)
Heterogeneous photocatalytic degradation of phenols in wastewater: A review on current status and developments (2010) (696)
Role of biofuel and their binary (diesel–biodiesel) and ternary (ethanol–biodiesel–diesel) blends on internal combustion engines emission reduction (2016) (267)
Prospects of 2nd generation biodiesel as a sustainable fuel—Part: 1 selection of feedstocks, oil extraction techniques and conversion technologies (2016) (215)
Prospect of biofuels as an alternative transport fuel in Australia (2015) (188)
Energy conservation measures in an institutional building in sub-tropical climate in Australia (2010) (177)
Statistical Diagnosis of the Best Weibull Methods for Wind Power Assessment for Agricultural Applications (2014) (158)
Recent development on the uses of alternative fuels in cement manufacturing process (2015) (156)
Analysis and comparison of performance and emissions of an internal combustion engine fuelled with petroleum diesel and different bio-diesels (2011) (150)
Prospects of 2nd generation biodiesel as a sustainable fuel - Part 2: Properties, performance and emission characteristics. (2016) (146)
Techno-economic simulation and optimization of residential grid-connected PV system for the Queensland climate (2012) (135)
Thermal-comfort analysis and simulation for various low-energy cooling-technologies applied to an office building in a subtropical climate (2008) (131)
Energy conservation in buildings: cogeneration and cogeneration coupled with thermal energy storage (2004) (119)
Performance and emission characteristics of a diesel engine fueled with palm, jatropha, and moringa oil methyl ester (2016) (113)
Second generation biodiesel: Potential alternative to-edible oil-derived biodiesel (2014) (113)
Physical properties of bagasse (1999) (110)
Production optimization and quality assessment of papaya ( Carica papaya ) biodiesel with response surface methodology (2018) (109)
Influence of second generation biodiesel on engine performance, emissions, energy and exergy parameters (2018) (98)
Prospects, feedstocks and challenges of biodiesel production from beauty leaf oil and castor oil: A nonedible oil sources in Australia (2016) (98)
Prospect of Moringa Seed Oil as a Sustainable Biodiesel Fuel in Australia: A Review☆ (2015) (89)
Assessment of the thermal performance and energy conservation opportunities of a cement industry in Indonesia (2005) (88)
Performance analysis of an integrated fixed bed gasifier model for different biomass feedstocks (2013) (78)
Recent Development in the Production of Third Generation Biodiesel from Microalgae (2019) (75)
Impact of alternative fuels on the cement manufacturing plant performance: an overview (2013) (75)
Analysis of Wind Energy Conversion System Using Weibull Distribution (2014) (73)
Segregation potential in binary gas fluidized beds (1999) (72)
Analysis of Wind Energy Prospect for Power Generation by Three Weibull Distribution Methods (2015) (71)
Pyrolysis of Municipal Green Waste: A Modelling, Simulation and Experimental Analysis (2015) (71)
Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source (2013) (69)
An overview of solar assisted air conditioning in Queensland's subtropical regions, Australia (2013) (68)
Energy recovery from municipal solid waste using pyrolysis technology: A review on current status and developments (2021) (67)
Analysis of solar desiccant cooling system for an institutional building in subtropical Queensland, Australia (2012) (66)
Recent Developments in Solar Thermal Desalination Technologies: A Review (2018) (66)
Recent Developments on Internal Combustion Engine Performance and Emissions Fuelled With Biodiesel-Diesel-Ethanol Blends (2015) (66)
Energy recovery from biomass by fast pyrolysis (2014) (64)
A Numerical Investigation of Municipal Solid Waste Gasification Using Aspen Plus (2014) (62)
The potential of utilising papaya seed oil and stone fruit kernel oil as non-edible feedstock for biodiesel production in Australia—A review (2019) (62)
Optimisation of Oil Extraction Process from Australian Native Beauty Leaf Seed (Calophyllum Inophyllum) (2015) (61)
Parametric study on thermal performance of horizontal earth pipe cooling system in summer (2016) (60)
Physio-chemical assessment of beauty leaf (Calophyllum inophyllum) as second-generation biodiesel feedstock (2015) (60)
Renewable energy in Bangladesh: Status and prospects (2019) (57)
Particles separation using fluidization techniques (2000) (56)
Modelling and experimental investigation of engine performance and emissions fuelled with biodiesel produced from Australian Beauty Leaf Tree (2015) (56)
Optimisation of Second-Generation Biodiesel Production from Australian Native Stone Fruit Oil Using Response Surface Method (2018) (55)
Experimental assessment of a solar desiccant cooling system for an institutional building in subtropical Queensland, Australia (2013) (55)
Lubricity Improvement of the Ultra-low Sulfur Diesel Fuel with the Biodiesel☆ (2015) (53)
Effect of Biodiesel-diesel Blending on Physico-chemical Properties of Biodiesel Produced from Moringa Oleifera (2015) (50)
Energy, exergy, performance, emission and combustion characteristics of diesel engine using new series of non-edible biodiesels (2019) (50)
General sustainability indicator of renewable energy system based on grey relational analysis (2013) (50)
Recent development of biodiesel combustion strategies and modelling for compression ignition engines (2016) (49)
Feasibility Study of Stand-Alone PV-Wind-Biomass Hybrid Energy System in Australia (2011) (48)
Role of Biofuels on IC Engines Emission Reduction (2015) (46)
Modelling and analysis of blast furnace performance for efficient utilization of energy (2007) (46)
Environmental pollution generated from process industries in Bangladesh (2006) (46)
An Experimental and Numerical Investigation of Fluidized Bed Gasification of Solid Waste (2013) (43)
Temperature monitoring and CFD Analysis of Data Centre (2013) (42)
A Mini Review on the Cold Flow Properties of Biodiesel and its Blends (2020) (42)
Comparative study of diesel engine performance and emission with soybean and waste oil biodiesel fuels (2015) (41)
Assessment of Wind Energy Prospect by Weibull Distribution for Prospective Wind Sites in Australia (2019) (41)
Fluidized bed combustion of Australian bagasse (2000) (41)
Comparison of oil extraction between screw press and solvent (n-hexane) extraction technique from beauty leaf (Calophyllum inophyllum L.) feedstock (2020) (41)
The efficacy of multiple-criteria design matrix for biodiesel feedstock selection (2019) (40)
Study on the Tribological Characteristics of Australian Native First Generation and Second Generation Biodiesel Fuel (2017) (39)
CFD study of heat transfer enhancement and fluid flow characteristics of laminar flow through tube with helical screw tape insert (2019) (38)
A review on socio-economic aspects of sustainable biofuels (2016) (38)
Spouted bed combustion of wood charcoal: Performance comparison of three different designs (2001) (37)
A Study on Thermo-catalytic Degradation for Production of Clean Transport Fuel and Reducing Plastic Wastes (2015) (37)
Comparison study of solar cooling technologies for an institutional building in subtropical Queensland, Australia (2013) (36)
Modelling of renewable energy economy in Australia (2014) (36)
Alternative Fuels for use in Cement Kilns: Process Impact Modelling (2013) (35)
Performance of nanofiltration membrane in a vibrating module (VSEP-NF) for arsenic removal (2010) (35)
Assessment of solar assisted air conditioning in Central Queensland's subtropical climate, Australia (2013) (34)
Design and development of advanced fuzzy logic controllers in smart buildings for institutional buildings in subtropical Queensland (2016) (34)
Investigation of exhaust emissions from a stationary diesel engine fuelled with biodiesel (2019) (34)
Tidal River Sediment Management–A Case Study in Southwestern Bangladesh (2013) (33)
Performance assessment of earth pipe cooling system for low energy buildings in a subtropical climate (2015) (33)
Comparison of the performance and emissions of different biodiesel blends against petroleum diesel (2011) (33)
Influence of the inlet velocity profiles on the prediction of velocity distribution inside an electrostatic precipitator (2009) (32)
Macadamia Biodiesel as a Sustainable and Alternative Transport Fuel in Australia (2017) (31)
Prospects of Biodiesel Production from Macadamia Oil as an Alternative Fuel for Diesel Engines (2016) (31)
Sustainable Biomass as an Alternative Energy Source: Bangladesh Perspective (2019) (30)
Flow simulation in an electrostatic precipitator of a thermal power plant (2009) (30)
Study on Australian energy policy, socio-economic, and environment issues (2015) (30)
Modelling of Engine Performance Fuelled with Second Generation Biodiesel (2014) (29)
Emission characteristics of waste tallow and waste cooking oil based ternary biodiesel fuels (2019) (29)
An experimental and computational study of aerodynamic properties of rugby balls (2008) (29)
Effect of small proportion of butanol additive on the performance, emission, and combustion of Australian native first- and second-generation biodiesel in a diesel engine (2017) (28)
Biodiesel production and characterisation of poppy (Papaver somniferum L.) seed oil methyl ester as a source of 2nd generation biodiesel feedstock (2020) (28)
A Pilot Study on Postgraduate Supervision (2013) (28)
A Study of Bubble Trajectory and Drag Co-efficient in Water and Non- Newtonian Fluids (2008) (27)
Feasibility of thermal energy storage systems in an institutional building in subtropical climates in Australia (2011) (27)
Climate change impacts on techno-economic performance of roof PV solar system in Australia (2016) (27)
Modelling and analysis of air-cooled reciprocating chiller and demand energy savings using passive cooling (2009) (27)
Utilization of Polymer Wastes as Transport Fuel Resources- a Recent Development (2014) (26)
Automatic Multi-Objective Calibration of a Rainfall Runoff Model for the Fitzroy Basin, Queensland, Australia (2013) (25)
Performance and Emission Characteristics of Binary Mixture of Poppy and Waste Cooking Biodiesel (2017) (25)
Recent Developments in Biomass Pyrolysis for Bio-Fuel Production : Its Potential for Commercial Applications (2012) (24)
Optimization of biodiesel production from stone fruit kernel oil (2019) (24)
A review on boiler deposition/foulage prevention and removal techniques for power plant (2010) (24)
Bio-gas Mixed Fuel Micro Gas Turbine Co-Generation for Meeting Power Demand in Australian Remote Areas (2015) (24)
Combustion and emission analysis of Jojoba biodiesel to assess its suitability as an alternative to diesel fuel (2019) (23)
Assessment of Energy Performance and Emission Control Using Alternative Fuels in Cement Industry through a Process Model (2017) (23)
A Review on Technologies for Reducing CO2 Emission from Coal Fired Power Plants (2012) (22)
Energy conservation measures in an institutional building by dynamic simulation using designbuilder (2008) (22)
Segregation in Binary and Ternary Liquid Fluidized Beds (2002) (22)
Assessment of Physical, Chemical, and Tribological Properties of Different Biodiesel Fuels (2017) (21)
Environmental impact assessment of green roofs using life cycle assessment (2020) (21)
A comparative review of stormwater treatment and reuse techniques with a new approach: Green Gully (2008) (20)
Comparative Evaluation of Edible and Non-edible Oil Methyl Ester Performance in a Vehicular Engine (2015) (20)
Study of performance, combustion and emission characteristics of a common rail diesel engine with tea tree oil-diglyme blends (2019) (19)
Opportunities for solar assisted biogas plant in subtropical climate in Australia: A review (2019) (19)
Stormwater treatment and reuse techniques: A review (2008) (19)
A pragmatic and critical analysis of engine emissions for biodiesel blended fuels (2020) (19)
Economic and Environmental Modeling of a Photovoltaic-Wind-Grid Hybrid Power System in Hot Arid Australia (2010) (19)
A Systematic Multivariate Analysis of Carica papaya Biodiesel Blends and Their Interactive Effect on Performance (2018) (19)
Performance and combustion analysis of diesel engine fueled with grape seed and waste cooking biodiesel (2019) (17)
Notable reductions in blow-by and particle emissions during cold and hot start operations from a turbocharged diesel engine using oxygenated fuels (2020) (17)
Experimental and computational analysis of combustion characteristics of a diesel engine fueled with diesel-tomato seed oil biodiesel blends (2021) (17)
The synergistic effects of oxygenated additives on papaya biodiesel binary and ternary blends (2019) (17)
Prospect of Underground Coal Gasification in Bangladesh (2015) (17)
Simulation and Optimization of Solar Desalination Plant Using Aspen Plus Simulation Software (2015) (16)
Waste coffee oil: A promising source for biodiesel production (2019) (16)
Thin-film fixed-bed reactor (TFFBR) for solar photocatalytic inactivation of aquaculture pathogen Aeromonas hydrophila (2012) (16)
Exergy Analysis and Efficiency Improvement of a Coal Fired Thermal Power Plant in Queensland (2013) (16)
Management of coal seam gas (CSG) by-product water : a case study on Spring Gully Mine Site in Queensland, Australia (2008) (16)
Performance, Emission and Combustion Characteristics of a Diesel Engine Powered by Macadamia and Grapeseed Biodiesels (2020) (16)
Aspen Plus Based Simulation for Energy Recovery from Waste to Utilize in Cement Plant Preheater Tower (2014) (15)
Fuzzy Logic based Environmental Indicator for Sustainability Assessment of Renewable Energy System using Life Cycle Assessment (2012) (15)
A Review on the Thermochemical Recycling of Waste Tyres to Oil for Automobile Engine Application (2021) (15)
Resource Recovery from Waste Coffee Grounds Using Ultrasonic-Assisted Technology for Bioenergy Production (2020) (15)
Performance assessment of carbonation process integrated with coal fired power plant to reduce CO2 (carbon dioxide) emissions (2014) (14)
An experimental investigation of solid waste gasification using a large pilot scale waste to energyplant (2014) (14)
The Lubricity of Ternary Fuel Mixture Blends as a Way to Assess Diesel Engine Durability (2017) (14)
An Investigation on Thermo Chemical Conversions of Solid Waste for Energy Recovery (2012) (14)
A Numerical Model of an Electrostatic Precipitator (2007) (13)
Comparison of Earth Pipe Cooling Performance Between two Different Piping Systems (2014) (13)
Potential of biodiesel as fuel for diesel engine (2017) (13)
Recent Developments of Advanced Fuzzy Logic Controllers Used in Smart Buildings in Subtropical Climate (2014) (13)
Influence of diglyme addition to diesel-biodiesel blends on notable reductions of particulate matter and number emissions (2019) (13)
ENERGY AND WASTE MANAGEMENT FOR PETROLEUM REFINING EFFLUENTS : A CASE STUDY IN BANGLADESH (2015) (12)
Potential of Saving Energy Using Advanced Fuzzy Logic Controllers in Smart Buildings in Subtropical Climates in Australia (2014) (12)
Energy recovery opportunities from mineral carbonation process in coal fired power plant (2013) (12)
A parametric analysis of the cooling performance of vertical earth-air heat exchanger in a subtropical climate (2021) (12)
Numerical modelling for optimizing flow distribution inside an electrostatic precipitator (2007) (12)
Good practice guidelines for managing, supervising and assessing final year engineering projects (2009) (11)
One-Dimensional Thermodynamic Model Development for Engine Performance, Combustion and Emissions Analysis Using Diesel and Two Paraffin Fuels (2019) (11)
Performance improvement of an internal combustion engine (2005) (11)
Effects of Baffles on Flow Distribution in an Electrostatic Precipitator (ESP) of a Coal Based Power Plant (2015) (11)
Comparison of Different Hydrograph Routing Techniques in XPSTORM Modelling Software: A Case Study (2014) (11)
An Experimental Study of Bubble Rise Characteristics in non - Newtonian (Power-Law) Fluids (2007) (10)
Thermal Power Plants: Advanced Applications (2014) (10)
Emission Characteristics of Polymer Additive Mixed Diesel-Sunflower Biodiesel Fuel (2019) (10)
Numerical Modelling for the Extreme Flood Event in the Fitzroy Basin, Queensland, Australia (2013) (10)
Thermal performance modelling of residential house wall systems (2012) (10)
Thin-film fixed-bed reactor for solar photocatalytic inactivation of Aeromonas hydrophila: influence of water quality (2012) (10)
Solar powered intermittent absorption refrigeration unit (2006) (10)
Thermal performance analysis of earth pipe cooling system for subtropical climate (2013) (10)
Feasibility of a solar thermal power plant in Pakistan (2013) (9)
A Review on Stormwater Harvesting and Reuse (2014) (9)
Assessment of Final Year Engineering Projects: A Pilot Investigation on Issues and Best Practice (2012) (9)
Performance analysis of vertical earth pipe cooling system for subtropical climate (2014) (9)
A study of spin effects on tennis ball aerodynamics (2008) (9)
Performance Evaluation of Hybrid Green Roof System in a Subtropical Climate Using Fluent (2014) (9)
An overview of solar thermal desalination technologies (2013) (8)
Cement Kiln Process Modeling to Achieve Energy Efficiency by Utilizing Agricultural Biomass as Alternative Fuels (2016) (8)
Performance Analysis of rooftop greenery systems in Australian subtropical climate (2020) (8)
Effect of first and second generation biodiesel blends on engine performance and emission (2016) (8)
AHP and fuzzy assessment based sustainability indicator for hybrid renewable energy system (2010) (8)
Modelling and simulation of performance and combustion characteristics of diesel engine (2019) (8)
Performance and emission characteristics of a compression ignition (CI) engine operated with beauty leaf biodiesel (2019) (8)
Rail temperature prediction model (2012) (7)
Optimization of biodiesel production process from papaya (Carica papaya) seed oil (2017) (7)
MODELLING AND SIMULATION OF BUILDING ENERGY CONSUMPTION: A CASE STUDY ON AN INSTITUTIONAL BUILDING IN CENTRAL QUEENSLAND, AUSTRALIA (2007) (7)
Diesel Engine Performance and Emission Study Using Soybean Biodiesel Blends with Fossil Diesel (2015) (7)
Introduction to sustainable and alternative ecofuels (2019) (7)
Getting it right assessment tasks and marking for capstone project courses (2014) (7)
Performance Analysis of Direct Injection Diesel Engine Fueled with Diesel-Tomato Seed Oil Biodiesel Blending by ANOVA and ANN (2019) (7)
Energy Savings by Fuzzy Base Control of Occupancy Concentration in Institutional Buildings (2017) (7)
The thermal and auto-ignition performance of a homogeneous charge compression ignition engine fuelled with diethyl ether and ethanol blends (2021) (7)
A review on recent developments in rail temperature prediction for use in buckling studies (2010) (6)
A Study on Energy and Environmental Management Techniques Used in Petroleum Process Industries (2018) (6)
An Experimental Investigation of Bubble Rise Characteristics in a Crystal Suspended Non—Newtonian Fluid (2008) (6)
Sustainability Indicator of Renewable Energy System Based on Fuzzy Multi-Criteria Decision Making Methods (2011) (6)
Review on the Existing and Developing Underground Coal Gasification Techniques in Abandoned Coal Seam Gas Blocks : Australia and Global Context (2014) (6)
Feasibility of a hybrid cooling system in a thermal power plant (2008) (6)
Biofuel: An Australian Perspective in Abating the Fossil Fuel Vulnerability (2015) (6)
Solar desiccant cooling and indoor air quality for institutional building in subtropical climate (review) (2012) (6)
Educational purposes of final year engineering projects and their assessment (2013) (6)
Recent development in producing biodiesel from non-edible oil feedstocks (2014) (6)
Gaseous and Particle Emissions from a Compression Ignition Engine Fueled with Biodiesel–Diesel Blends (2018) (6)
Learning and teaching approaches and methodologies of capstone final year engineering projects (2015) (6)
Effect of butanol additive on the performance and emission of Australian macadamia biodiesel fuel in a diesel engine (2017) (6)
Performance evaluation of hybrid earth pipe cooling with horizontal piping system (2016) (5)
Bubble rise phenomena in non-newtonian crystal suspensions (2012) (5)
Assessment of wind energy potential by Weibull distribution in isolated islands (2014) (5)
Final year engineering projects: Improving assessment, curriculum and supervision to meet AQF8 outcomes (2014) (5)
Parametric Analysis of Thermal Comfort and Energy Efficiency in Building in Subtropical Climate (2016) (5)
Identification of an Appropriate Alternative Waste Technology for Energy Recovery from Waste through Multi-Criteria Analysis (2012) (5)
An Overview of Solar Cooling Technologies Markets Development and its Managerial Aspects (2014) (5)
Flow distribution inside an electrostatic precipitator : effects of uniform and variable porosity of perforated plate (2007) (5)
Study on Wind Energy Potential by Eight Numerical Methods of Weibull Distribution (2017) (5)
The Integration of Day Light with Advance Fuzzy Based Controllers for Institutional Buildings in the Region of Central Queensland, Australia (2017) (5)
CFD Simulation and a Pragmatic Analysis of Performance and Emissions of Tomato Seed Biodiesel Blends in a 4-Cylinder Diesel Engine (2020) (5)
Developments in Engineering Education Standards: Advanced Curriculum Innovations (2012) (5)
Flow of a low concentration polyacrylamide fluid solution in a channel with a flat plate obstruction at the entry (2004) (5)
Improvement Strategies for Mine Dewatering Process (2007) (5)
Biodiesel production from tomato seed and its engine emission test and simulation using Artificial Neural Network (2018) (5)
Rainfall, temperature and evaporation trends in the Fitzroy basin, Queensland, Australia (2012) (5)
Enhancement of biogas generation in up-flow sludge blanket (UASB) bioreactor from palm oil mill effluent (POME) (2019) (5)
Measurement of instantaneous flow velocities in a concentric reducer using Particle Image Velocimetry: Study of scale deposition (2009) (5)
Assessing final year engineering projects (2013) (5)
Comparison of oil refining and biodiesel production process between screw press and n-hexane techniques from beauty leaf feedstock (2016) (5)
Getting it right: the case for supervisors assessing process in capstone projects (2015) (5)
Experimental investigation of hydrodynamic and heat transfer effects on scaling in an agitated tank (2018) (4)
Study of combustion and emission characteristics of fuel derived from waste plastics by various waste to energy (W-t-E) conversion processes (2016) (4)
Guidelines for curriculum development of final year engineering projects to support achievement of AQF8 outcomes (2014) (4)
An experimental and computational investigation of performance of the Green Gully for reusing stormwater (2011) (4)
Flow of a mixed solution in a channel with obstruction at the entry : Experimental and numerical investigation and comparison with other fluids (2006) (4)
Numerical Modeling of Vertical Earth Pipe Cooling System for Hot and Humid Subtropical Climate (2015) (4)
Watershed delineation and cross-section extraction from DEM for flood modelling (2014) (3)
Simulation of building thermal performance in an institutional building in subtropical climate (2007) (3)
Performance assessment and improvement of an existing air conditioning system of a supermarket: a case study on bi-lo supermarket (2008) (3)
Environmental and economic analysis for grid-connected hybrid photovoltaic-wind power system in a hot arid environment (2010) (3)
Simulation and Optimization of Residential Grid-Connected PV System in Queensland, Australia (2011) (3)
A Review on Rational Use of Energy and its Conservation Measures in Process Industry: A Case of Textile Industry (1994) (3)
Biodiesel From Queensland Bush Nut (Macadamia integrifolia) (2017) (3)
Workshop: Good practice guidelines for curriculum, supervision and assessment of final year engineering projects and AQF8 learning outcomes (2014) (3)
Recent developments in photocatalytic degradation of pesticides and phenols in storm and wastewater effluent (2010) (3)
Towards Energy Efficient Building Assets: A Review on Sub-Tropical Climate (2006) (3)
Numerical Modelling of Reverse Flow Phenomena in a Channel with Obstruction Geometry at the Entry (2008) (3)
Integrated Model of Horizontal Earth Pipe Cooling System for a Hot Humid Climate (2018) (3)
A review on green wastes pyrolysis for energy recovery (2012) (3)
Modelling of grease transport mechanism in wayside rail lubrication and impact of related parameters (2012) (3)
Ecofuel and its compatibility with different automotive metals to assess diesel engine durability (2019) (3)
A comparative study of bubble rise phenomena in water and low concentration polymer solutions (2007) (3)
Industrial waste as alternative fuel in cement industry its impact on environment (2012) (3)
Large Eddy Simulation of Pressure Distribution of Fluid Flow Over Ridges of Circular, Parabolic and Rectangular Shapes (2011) (2)
Assessment of the thermal performance of a coal-fired power plant boiler unit (2006) (2)
LOW ENERGY COOLING TECHNOLOGIES FOR SUB-TROPICAL/WARM HUMID CLIMATE BUILDING SYSTEMS (2006) (2)
Integration of Carbonation Process with Coal Fired Power Plant to Reduce CO2 Emissions (2012) (2)
Fluid flow analysis in electrostatic precipitator of a coal fired power plant considering electrode with two different shape of baflles (2015) (2)
Fluid flow chractericitics on scale deposition in a concentric reducer using CFD approach (2015) (2)
An innovative delivery and assessment of Thermofluid Engineering: a PBL course in undergraduate engineering program (2011) (2)
Review of the nexus between urban and regional planning and engineering education (2012) (2)
Modeling and Simulation of Heat and Mass Flow by ASPEN HYSYS for Petroleum Refining Process in Field Application (2016) (2)
A comparative study of engine performance and emission characteristics of biodiesels produced from the waste seeds of papaya and stone fruit (2019) (2)
Community engagement in engineering education (2011) (2)
Reduction of carbon dioxide emissions by mineral carbonation (2010) (2)
Performance Assessment of Desiccant air Conditioning System in an Institutional Building in Subtropical Climate (2017) (2)
Modelling and Simulation of the Effects of Passive Cooling Technologies on Energy Savings for Building Systems in Subtropical Climate (2007) (2)
Buoyancy force in liquid fluidized beds of mixed particles (1999) (2)
Corrigendum to “Influence of second generation biodiesel on engine performance, emissions, energy and exergy parameters” [Energy Convers. Manage. 169 (2018) 326–333] (2018) (2)
CFD Simulation of turbulence promoters in a water treatment reactor (2011) (2)
Analysis of Energy Performance of Institutional Buildings in Subtropical Climate (2017) (2)
Fluidization characteristics of bagasse in a gas-fluidized bed (1998) (2)
Modelling of baffles in electostatic precipitator (ESP0 to achieve optimum flow distribution (2015) (2)
An Evaluation of CO2 Emission Reduction through Carbonation Technology (2011) (1)
Modelling of Air Bubble Rising in Water and Polymeric Solution (2010) (1)
Applied Energy – ICAE 2015 Biogas Mixed Fuel Micro Gas Turbine Co-Generation for Meeting Power Demand in Australian Remote Areas (2015) (1)
Combustion characteristics of an agricultural diesel engine fuelled with papaya and stone fruit biodiesel: A comparison (2019) (1)
A Case Study on Management of Coal Seam Gas By-Product Water (2015) (1)
Solar Desiccant Cooling System for a Commercial Building in Kuwait’s Climatic Condition (2022) (1)
Emissions calculation for a grid-assisted hybrid renewable energy system in central Queensland region (2010) (1)
A review on performance and emission characteristics of diesel engine fueled with ternary blends of diesel, biodiesel and bioethanol fuels (2022) (1)
Numerical Study of Flow Through a Reducer for Scale Growth Suppression (2016) (1)
Feasibility Study of Solar Desiccant Cooling for an Institutional Building in Subtropical Queensland, Australia (2012) (1)
Warehouse Management Models Using Artificial Intelligence Technology with Application at Receiving Stage – A Review (2021) (1)
Thermal performance modelling of data centre– a case study (2012) (1)
Erratum to: selection of suitable passive cooling strategy for a subtropical climate (2015) (1)
Eco-roof System for Sustainable Communities (2009) (1)
Model development for performance analysis of a spark ignition engine fueled with propane and octane (2017) (1)
Computational fluid dynamics analysis of a flat plate photocatalytic reactor for storm and wastewater reuse (2010) (1)
Numerical Modelling of Hybrid Vertical Earth Pipe Cooling System (2014) (1)
Application of project based learning in advanced dynamics (2011) (1)
Review on solar assisted air conditioning for hospitals isolation units (2010) (1)
A Proposed Framework for Estimating Missing Values in Biofuel Feedstock Selection (2022) (1)
Sustaining competencies and employability: A fishbone model for engineering education to fit the processes of life (2019) (1)
Underground Coal Gasification in abandoned Coal Seam Gas blocks (2014) (1)
A Sustainable Production in Sugar Industries: Study of an Improved Vacuum Pan Performance through Numerical Simulations (2009) (1)
Application of Project Based Study in the Learning Process: A Case Study (2010) (1)
Thermal Power Plants (2012) (1)
Modelling and analysis of blast furnace for efficient utilization of energy (2009) (1)
Fine particulate emission control by optimizing process parameters of an electrostatic precipitator (2010) (1)
Outboard engine emissions: Modelling and simulation of underwater propeller velocity profile using the CFD code FLUENT (2007) (1)
Grey water reclaiming and reuse for coal dust suppression in a power plant (2006) (1)
Erratum to “Modelling and analysis of blast furnace for efficient utilization of energy” [Applied Thermal Engineering 27 (2007) 78–88] (2009) (1)
Assessment in PBL: do we assess the learner or the product? (2016) (1)
Energy Recovery from Solid Waste: Application of Gasification Technology (2018) (1)
Municipal Green Waste (MGW) Pyrolysis (2017) (1)
Implementing renewable energy for HVAC systems in entertainment and exhibition centres (2010) (1)
Economical and Environmental Performance of Solar Desiccant Cooling in Subtropical Australia (2012) (1)
A new approach to stormwater treatment and reuse : Green Gully and its performance measurement (2008) (1)
Numerical simulation of flow in a photocatalytic reactor containing baffles (2011) (1)
Flood Scenarios for Hydrological and Hydrodynamic Modelling (2015) (1)
Modeling and simulation of thermodynamic processes of vertical shaft kiln used for producing deadburned magnesia (2007) (1)
Assessing Final Year Engineering Projects: Ensuring Learning and Teaching Standards and AQF8 Outcomes (2015) (1)
Experimental study of a high voltage (HV) electrostatic precipitator to achieve higher collection efficiency (2017) (1)
Design and simulation of a small scale solar powered desalination system (2008) (1)
Density, Kinematic Viscosity and Cetane Number Prediction of Biofuel Feedstocks from Fatty Acid Compositions (2022) (0)
Performance Assessment of an Electrostatic Precipitator of a Coal-Fired Power Plant—A Case Study for Collecting Smaller Particles (2018) (0)
Techno-economic Study of Thermal Energy Storage Systems in Tropical Climate University Building (2008) (0)
Sustainable Reuse of Storm/Waste-water Resources: A Review on Solar Photocatalytic Purification Processes (2009) (0)
Supervision and management practices of Final Year Engineering Projects: Impacts of COVID-19 Pandemic (2022) (0)
Feasibility Study of a Bi-directional Centrifugal Pump for DBT class 45 CST Gearbox Used in Underground Coal mining Operation (2007) (0)
Solar air conditioning for an institutional building in subtropical climate (2013) (0)
GHGs emissions analysis for a grid-connected hybrid renewable energy system in Central Queensland region of Australia (2013) (0)
Australian Journal of Mechanical Engineering (2017) (0)
Impacts of climate change on solar PV power system: a case study in subtropical Rockhampton, Australia (2012) (0)
Blast furnace performance analysis for efficient utilization of energy (2005) (0)
Hot acid leaching of Zircon (2005) (0)
Analysis and Comparison of Engine Performance and Exhaust Emissions of Internal Combustion Engine for Three Different Fuel Efficiency Devices (2012) (0)
Modeling and Simulation of Thermodynamic Processes of Vertical Shaft Kiln Used for Producing Deadburned (0)
DRAG CO-EFFICIENT IN A CRYSTAL SUSPENSION (2009) (0)
Modelling of bubble flow distribution in crystal suspended non-newtonian fluids (2010) (0)
Development of Dispersion Model of a Two-Stroke Engine Outboard Plume (2017) (0)
美葉油とカストール油からのバイオディーゼル製造の見通し,原料および挑戦:オーストラリアにおける非食用油源 (2016) (0)
Cooling tower performance analysis to save energy and cost (2004) (0)
Modelling and Simulation of Thermodynamic Processes of Vertical Shaft Kiln in Magnesia Plant Using CFD Code Fluent (2007) (0)
A Numerical Approach to Improve the Flow Model of an Electrostatic Precipitator (2008) (0)
Editorial – Australian Journal of Mechanical Engineering (2017) (0)
Simulation of fluid velocity distribution inside the condenser waterbox of a power plant (2006) (0)
Analysis of Flow Patterns Inside the Stirred Tank Used in Alumina Refinery (2008) (0)
A review on the role of operating parameters in heterogeneous photo catalytic water purification processes for storm and wastewater reuse (2010) (0)
Environmental pollution in process industries: A case study on Bangladesh (2003) (0)
Building Energy Management: Co-Generation Coupling With Thermal Energy Storage (2002) (0)
Hybrid-Electric Vehicles: Design and Application of ECSC - an Automotive Energy Savings Device (2007) (0)
Plenary lecture 2: fine particulate emission control of power plants (2010) (0)
Pyrolysis of Beauty Leaf Fruit Husk: Effect of Process Temperature on the Yield, Composition, and Properties of Produced Bio-Oil (2021) (0)
Energy Resource Quality Assessment of PV/Wind Hybrid Renewable Energy System (2010) (0)
生物燃料とその2成分(ディーゼル‐バイオディーゼル)と3成分(エタノール‐バイオディーゼル‐ディーゼル)混合燃料の内燃機関排出削減に関する役割 (2016) (0)
An experimental investigation and modelling of fluid flow in solar photocatalytic reactor for contaminated water treatment (2012) (0)
Kinetic Modelling of Esterification and Transesterification Processes for Biodiesel Production Utilising Waste-Based Resource (2022) (0)
Thermodynamic processes and characterisation of dead burned magnesia: a review (2010) (0)
Thermal Efficiency Modeling in a Subtropical Data Center (2016) (0)
Experimental Investigation of Heat Transfer and Scale Growth Characteristics of Crystallisation Scale in Agitation Tank (2018) (0)
STUDY OF FLUID DYNAMICS APPROACH TO SCALE GROWTH MECHANISM AND ITS SUPPRESSION TECHNIQUE (2017) (0)
Ranking the Feedstocks Using Neural Network-Based System for Biofuel Production (2021) (0)
Bubble rise velocity and drag co-efficient at high reynolds number in power-law fluids (2007) (0)
Energy efficient cooling technologies for achieving sustainability in buildings in subtropical climate (2008) (0)
Selected Papers from the 2014 Capstone Design Conference (2015) (0)
Quality outcomes of learning and teaching in final year engineering projects (2016) (0)
Industrial engagement for ensuring engineering education standards in developing countries (2015) (0)
Guidelines for learning and teaching of final year engineering projects at AQF8 learning outcomes (2015) (0)
Assessing final year engineering projects (FYEPs) ensuring learning and teaching standards and AQF8 outcomes : final report 2015 / (2015) (0)
Segregation potential in multi-component particulate fluidized beds (1999) (0)
Work ready engineering graduates through WIL processes (2022) (0)
Assessment in PBL (2016) (0)
Algorithms Evaluation for Improving Classification and Counting Model in Warehouse Receiving Management (2020) (0)
About the contributors. (2005) (0)
Assessment of energy recovery from carbonation process using mass and energy balance (2011) (0)
A review of the role of operating parameters in heterogeneous photo catalytic water purification (2010) (0)
Design optimization of solar desiccant cooling system for the climatic condition of Kuwait (2022) (0)
Stormwater management : an introduction to Green Gully (2011) (0)
Australian Journal of Mechanical Engineering (2018) (0)
An Experimental and Computational Study of Aerodynamic Properties of Rugby Balls 1 (2008) (0)
Erratum to: selection of suitable passive cooling strategy for a subtropical climate (2015) (0)
Review of CO 2 Capture Technologies for Power Plant Application (2012) (0)
Development of learning and teaching standards of Final Year Engineering Projects (FYEPs) (2013) (0)
Gasification of coffee bean husks analysis and model development for energy generation using ASPEN Plus simulation software (2013) (0)
Ternary or binary blend? A case study using papaya seed oil biodiesel (2021) (0)
Economy of Smart Grid (2013) (0)
Characterisation of Marine Two-Stroke Outboard Engine Emissions to Water (2001) (0)
Feasibility of grey water reuse for coal dust suppression in a coal-fired power station (2007) (0)
Prospective use of antioxidants in 2nd generation biodiesel for diesel engines in Australia (2014) (0)
Flow Characteristics of Low Concentration Non-Newtonian Fluid Through a Channel With an Obstruction at the Entry (2002) (0)
FLOW FIELD INVESTIGATION IN A WATER TREATMENT REACTOR USING COMPUTATIONAL FLUID DYNAMICS (2011) (0)
Integration of project based investigation into an undergraduate fluid mechanics course for research and teaching excellence (2009) (0)
Drag Coefficient In A Crystal Suspension (1970) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Mohammad Golam Rasul?

Mohammad Golam Rasul is affiliated with the following schools:

Central Queensland University