Nele De Belie
#102,102
Most Influential Person Now
Researcher
Nele De Belie's AcademicInfluence.com Rankings
Nele De Belieengineering Degrees
Engineering
#2685
World Rank
#3651
Historical Rank
Civil Engineering
#88
World Rank
#123
Historical Rank
Applied Physics
#374
World Rank
#390
Historical Rank
Download Badge
Engineering
Nele De Belie's Degrees
- PhD Civil Engineering Ghent University
- Masters Civil Engineering Ghent University
- Bachelors Civil Engineering Ghent University
Why Is Nele De Belie Influential?
(Suggest an Edit or Addition)Nele De Belie's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Microbial carbonate precipitation in construction materials: A review (2010) (1083)
- Use of bacteria to repair cracks in concrete (2010) (799)
- Self-healing concrete by use of microencapsulated bacterial spores (2014) (633)
- Bacterial carbonate precipitation improves the durability of cementitious materials (2008) (583)
- Use of silica gel or polyurethane immobilized bacteria for self-healing concrete (2012) (532)
- Bacterial carbonate precipitation as an alternative surface treatment for concrete (2008) (509)
- Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: Literature review and theoretical calculations (2012) (499)
- Self-Healing in Cementitious Materials—A Review (2013) (428)
- Application of hydrogel encapsulated carbonate precipitating bacteria for approaching a realistic self-healing in concrete (2014) (400)
- Bio-deposition of a calcium carbonate layer on degraded limestone by Bacillus species (2006) (400)
- Self-healing efficiency of cementitious materials containing tubular capsules filled with healing agent (2011) (346)
- Self-healing cementitious materials by the combination of microfibres and superabsorbent polymers (2014) (337)
- A Review of Self‐Healing Concrete for Damage Management of Structures (2018) (328)
- Diatomaceous earth as a protective vehicle for bacteria applied for self-healing concrete (2012) (327)
- CHEMICAL, MICROBIOLOGICAL AND IN SITU TEST METHODS FOR BIOGENIC SULFURIC ACID CORROSION OF CONCRETE (2000) (288)
- Self-Healing in Cementitious Materials—A Review (2013) (285)
- Self-healing phenomena in cement-based materials (2013) (260)
- Influence of mix composition on the extent of autogenous crack healing by continued hydration or calcium carbonate formation (2012) (233)
- The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials (2015) (229)
- Application of super absorbent polymers (SAP) in concrete construction—update of RILEM state-of-the-art report (2021) (228)
- EXPERIMENTAL RESEARCH AND PREDICTION OF THE EFFECT OF CHEMICAL AND BIOGENIC SULFURIC ACID ON DIFFERENT TYPES OF COMMERCIALLY PRODUCED CONCRETE SEWER PIPES (2004) (220)
- Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50 (2014) (217)
- Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography (2012) (214)
- X-ray computed tomography proof of bacterial-based self-healing in concrete (2014) (212)
- Influence of urea and calcium dosage on the effectiveness of bacterially induced carbonate precipitation on limestone (2010) (212)
- Performance of cement-based materials in aggressive aqueous environments (2007) (209)
- Resistance of concrete and mortar against combined attack of chloride and sodium sulphate (2014) (193)
- Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity (2008) (184)
- Single and combined effects of nano-SiO2, nano-Al2O3 and nano-TiO2 on the mechanical, rheological and durability properties of self-compacting mortar containing fly ash (2015) (183)
- Titanium dioxide coated cementitious materials for air purifying purposes: Preparation, characterization and toluene removal potential (2010) (173)
- Experimental characterization of the self-healing capacity of cement based materials and its effects on the material performance: A state of the art report by COST Action SARCOS WG2 (2018) (166)
- Design of polymeric capsules for self-healing concrete (2015) (160)
- TC 238-SCM: hydration and microstructure of concrete with SCMs (2015) (158)
- X-ray computed microtomography to study autogenous healing of cementitious materials promoted by superabsorbent polymers (2016) (158)
- Chemical and microbiological tests to simulate sulfuric acid corrosion of polymer-modified concrete (2001) (155)
- Screening of bacteria and concrete compatible protection materials (2015) (155)
- Study of the hydration of Portland cement blended with blast-furnace slag by calorimetry and thermogravimetry (2010) (155)
- Comparison of different approaches for self-healing concrete in a large-scale lab test (2016) (151)
- Repeated Autogenous Healing in Strain-Hardening Cementitious Composites by Using Superabsorbent Polymers (2016) (146)
- The Use of Municipal Solid Waste Incineration Ash in Various Building Materials: A Belgian Point of View (2018) (141)
- Carbonation of slag concrete: Effect of the cement replacement level and curing on the carbonation coefficient – Effect of carbonation on the pore structure (2013) (139)
- Acoustic emission analysis for the quantification of autonomous crack healing in concrete (2012) (139)
- Application of microorganisms in concrete: a promising sustainable strategy to improve concrete durability (2016) (135)
- Methods for measuring pH in concrete: A review (2016) (135)
- Microbially induced CaCO3 precipitation through denitrification : an optimization study in minimal nutrient environment (2015) (134)
- Effect of superabsorbent polymers (SAP) on the freeze–thaw resistance of concrete: results of a RILEM interlaboratory study (2017) (127)
- Influence of pozzolans and slag on the microstructure of partially carbonated cement paste by means of water vapour and nitrogen sorption experiments and BET calculations (2010) (127)
- Microbial carbonate precipitation for the improvement of quality of recycled aggregates (2017) (126)
- Investigation of the influence of blast-furnace slag on the resistance of concrete against organic acid or sulphate attack by means of accelerated degradation tests (2012) (123)
- Evaluation of strategies to prevent algal fouling on white architectural and cellular concrete (2009) (122)
- Ultrasound monitoring of the influence of different accelerating admixtures and cement types for shotcrete on setting and hardening behaviour (2005) (121)
- Effectiveness of admixtures, surface treatments and antimicrobial compounds against biogenic sulfuric acid corrosion of concrete (2009) (121)
- Superabsorbent polymers: A review on the characteristics and applications of synthetic, polysaccharide-based, semi-synthetic and ‘smart’ derivatives (2019) (120)
- From straw in bricks to modern use of microfibers in cementitious composites for improved autogenous healing – A review (2015) (117)
- Enhanced crack closure performance of microbial mortar through nitrate reduction (2016) (112)
- Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements—results of a round robin test (2018) (110)
- Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques (2015) (107)
- Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test (2018) (107)
- Fines extracted from recycled concrete as alternative raw material for Portland cement clinker production (2015) (107)
- Crack Mitigation in Concrete: Superabsorbent Polymers as Key to Success? (2017) (105)
- The influence of different drying techniques on the water sorption properties of cement-based materials (2014) (105)
- pH-sensitive superabsorbent polymers: a potential candidate material for self-healing concrete (2014) (105)
- Influence of temperature on the effectiveness of a biogenic carbonate surface treatment for limestone conservation (2013) (103)
- Influence of polymer addition on biogenic sulfuric acid attack of concrete (2002) (102)
- The water kinetics of superabsorbent polymers during cement hydration and internal curing visualized and studied by NMR (2017) (102)
- The efficiency of self-healing cementitious materials by means of encapsulated polyurethane in chloride containing environments (2014) (101)
- Reactivity of fly ash in cement paste studied by means of thermogravimetry and isothermal calorimetry (2008) (101)
- Crack repair in concrete using biodeposition (2008) (98)
- Acoustic impulse-response technique for evaluation and modelling of firmness of tomato fruit (1999) (96)
- Application of modified-alginate encapsulated carbonate producing bacteria in concrete: a promising strategy for crack self-healing (2015) (96)
- Industrial application of biological self-healing concrete: challenges and economical feasibility (2015) (94)
- Nitrate reducing CaCO3 precipitating bacteria survive in mortar and inhibit steel corrosion (2016) (93)
- The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments (2015) (92)
- RILEM TC-238 SCM recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages (2018) (92)
- Life Cycle Assessment of Completely Recyclable Concrete (2014) (91)
- Mechanical and self-healing properties of cementitious composites reinforced with flax and cottonised flax, and compared with polyvinyl alcohol fibres (2012) (90)
- Effect of nano-CuO and fly ash on the properties of self-compacting mortar (2015) (89)
- pH-responsive superabsorbent polymers: A pathway to self-healing of mortar (2015) (87)
- Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials: State-of-the-Art Report of the RILEM Technical Committee 238-SCM, Working Group 4 (2018) (87)
- Bacillus sphaericus LMG 22257 is physiologically suitable for self-healing concrete (2017) (87)
- Outcomes of the RILEM round robin on degree of reaction of slag and fly ash in blended cements (2017) (86)
- Influence of Pore Structure on the Effectiveness of a Biogenic Carbonate Surface Treatment for Limestone Conservation (2011) (84)
- Capillary water absorption in cracked and uncracked mortar – A comparison between experimental study and finite element analysis (2016) (82)
- Methyl methacrylate as a healing agent for self-healing cementitious materials (2011) (81)
- Durability of Building Materials and Components in the Agricultural Environment, Part II: Metal Structures (2000) (81)
- Development of an automated monitoring device to quantify changes in firmness of apples during storage (2000) (80)
- A Novel Design of Autonomously Healed Concrete: Towards a Vascular Healing Network (2017) (77)
- The efficiency of self-healing concrete using alternative manufacturing procedures and more realistic crack patterns (2015) (76)
- Comparative life cycle assessment of magnesium binders as an alternative for hemp concrete (2018) (75)
- Chloride penetration in cracked mortar and the influence of autogenous crack healing (2016) (74)
- Transport properties of high-volume fly ash concrete: Capillary water sorption, water sorption under vacuum and gas permeability (2010) (73)
- Firmness changes of pear fruit before and after harvest with the acoustic impulse response technique (2000) (73)
- Production of non-axenic ureolytic spores for self-healing concrete applications (2015) (73)
- Effect of secondary copper slag as cementitious material in ultra-high performance mortar (2016) (73)
- Chloride induced reinforcement corrosion behavior in self-healing concrete with encapsulated polyurethane (2018) (72)
- Improved model for capillary absorption in cementitious materials : progress over the fourth root of time (2017) (71)
- Alginate biopolymers: Counteracting the impact of superabsorbent polymers on mortar strength (2016) (71)
- Self-healing of moving cracks in concrete by means of encapsulated polymer precursors (2016) (71)
- Self-healing of moving cracks in concrete by means of encapsulated polymer precursors (2016) (71)
- Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting (2009) (71)
- Self-healing mortar with pH-sensitive superabsorbent polymers: testing of the sealing efficiency by water flow tests (2016) (71)
- Self-protected nitrate reducing culture for intrinsic repair of concrete cracks (2015) (70)
- Resistance of different types of concrete mixtures to sulfuric acid (2003) (69)
- Influence of the cement type on the resistance of concrete to feed acids (1996) (69)
- A service life based global warming potential for high-volume fly ash concrete exposed to carbonation (2014) (68)
- Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC (2020) (68)
- Photocatalytic activity of titanium dioxide nanoparticle coatings applied on autoclaved aerated concrete: effect of weathering on coating physical characteristics and gaseous toluene removal. (2012) (68)
- Bioreceptivity evaluation of cementitious materials designed to stimulate biological growth. (2014) (64)
- Influence of ripening and turgor on the tensile properties of pears: a microscopic study of cellular and tissue changes. (2000) (64)
- Characterization of supplementary cementitious materials by thermal analysis (2017) (64)
- Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature (2018) (63)
- Improved multiple cracking and autogenous healing in cementitious materials by means of chemically-treated natural fibres (2015) (62)
- Bacteria-based repair and self-healing of concrete (2016) (61)
- Performance and properties of mortar mixed with nano-CuO and rice husk ash (2016) (61)
- Mechanical regains due to self-healing in cementitious materials: Experimental measurements and micro-mechanical model (2016) (60)
- Resistance to biogenic sulphuric acid corrosion of polymer-modified mortars (2001) (60)
- Detecting the Activation of a Self-Healing Mechanism in Concrete by Acoustic Emission and Digital Image Correlation (2013) (59)
- Water penetration through cracks in self-healing cementitious materials with superabsorbent polymers studied by neutron radiography (2018) (59)
- Impact of air entraining admixtures on biogenic calcium carbonate precipitation and bacterial viability (2017) (58)
- Test methods to determine durability of concrete under combined environmental actions and mechanical load: final report of RILEM TC 246-TDC (2017) (57)
- Superabsorbent polymers to mitigate plastic drying shrinkage in a cement paste as studied by NMR (2018) (57)
- Monitoring crack movement in polymer-based self-healing concrete through digital image correlation, acoustic emission analysis and SEM in-situ loading (2017) (56)
- Porosity, gas permeability, carbonation and their interaction in high-volume fly ash concrete (2008) (56)
- Isothermal and solution calorimetry to assess the effect of superplasticizers and mineral admixtures on cement hydration (2011) (56)
- Monitoring crack movement in polymer-based self-healing concrete through digital image correlation, acoustic emission analysis and SEM in-situ loading (2017) (56)
- Integral procedure to assess crack filling and mechanical contribution of polymer-based healing agent in encapsulation-based self-healing concrete (2017) (55)
- Use of neutron radiography and tomography to visualize the autonomous crack sealing efficiency in cementitious materials (2013) (55)
- Principal component analysis of chewing sounds to detect differences in apple crispness (2000) (55)
- Biomechanical Properties of Bovine Claw Horn (2006) (55)
- Influence of air entraining agents on deicing salt scaling resistance and transport properties of high-volume fly ash concrete (2013) (54)
- Pore structure description of mortars containing ground granulated blast-furnace slag by mercury intrusion porosimetry and dynamic vapour sorption (2017) (53)
- Carbonation of concrete with construction and demolition waste based recycled aggregates and cement with recycled content (2020) (53)
- Titanium dioxide based strategies to prevent algal fouling on cementitious materials (2013) (53)
- A chitosan based pH-responsive hydrogel for encapsulation of bacteria for self-sealing concrete (2018) (52)
- Supplementary Cementitious Materials for Concrete: Characterization Needs (2012) (52)
- Application of bacteria in concrete : a critical evaluation of the current status (2016) (52)
- Life Cycle Assessment of Completely Recyclable Concrete (2014) (52)
- Improvement of concrete durability with the aid of bacteria (2005) (52)
- A sensitivity study for the visualisation of bacterial weathering of concrete and stone with computerised X-ray microtomography. (2005) (51)
- Resistance of concrete with blast-furnace slag against chlorides, investigated by comparing chloride profiles after migration and diffusion (2013) (50)
- Poly(methyl methacrylate) capsules as an alternative to the 'proof-of-concept' glass capsules used in self-healing concrete (2018) (50)
- Attack of Concrete Floors in Pig Houses by Feed Acids: Influence of Fly Ash Addition and Cement-bound Surface Layers (1997) (50)
- Cleaning of concrete fouled by lichens with the aid of Thiobacilli (2005) (48)
- Novel active crack width control technique to reduce the variation on water permeability results for self-healing concrete (2019) (47)
- Bio-Based Self-Healing Concrete: From Research to Field Application (2016) (47)
- Antimicrobial mortar surfaces for the improvement of hygienic conditions (2010) (47)
- First Large Scale Application with Self-Healing Concrete in Belgium: Analysis of the Laboratory Control Tests (2020) (46)
- Simulation-Aided Design of Tubular Polymeric Capsules for Self-Healing Concrete (2016) (46)
- Simulation-Aided Design of Tubular Polymeric Capsules for Self-Healing Concrete (2016) (46)
- Quality improvement of mixed and ceramic recycled aggregates by biodeposition of calcium carbonate (2017) (45)
- Physical characterization methods for supplementary cementitious materials (2015) (45)
- Clinkering Reactions During Firing of Recyclable Concrete (2012) (44)
- Potential of applying bacteria of heal cracks in concrete (2010) (44)
- Influence of active crack width control on the chloride penetration resistance and global warming potential of slabs made with fly ash + silica fume concrete (2014) (43)
- Physical evidence of swelling as the cause of anomalous capillary water uptake by cementitious materials (2019) (43)
- The use of superabsorbent polymers as a crack sealing and crack healing mechanism in cementitious materials (2012) (43)
- Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires (2014) (43)
- Encapsulated Phase-Change Materials as additives in cementitious materials to promote thermal comfort in concrete constructions (2016) (43)
- Cross-linkable polyethers as healing/sealing agents for self-healing of cementitious materials (2016) (42)
- The Use of Visible and Near-Infrared Reflectance Measurements to assess Sensory Changes in Carrot Texture and Sweetness during Heat Treatment (2003) (42)
- Apparatus for accelerated degradation testing of concrete specimens (2002) (42)
- Cross-linkable polyethers as healing/sealing agents for self-healing of cementitious materials (2016) (42)
- Durability of building materials and components in the agricultural environment: Part I, the agricultural environment and timber structures. (2000) (41)
- Combined Effects of Metakaolin, Rice Husk Ash, and Polypropylene Fiber on the Engineering Properties and Microstructure of Mortar (2017) (41)
- Preliminary study on the influence of turgor pressure on body reflectance of red laser light as a ripeness indicator for apples (1999) (41)
- Quantification of the Service Life Extension and Environmental Benefit of Chloride Exposed Self-Healing Concrete. (2016) (40)
- Performance monitoring of large-scale autonomously healed concrete beams under four-point bending through multiple non-destructive testing methods (2016) (40)
- Microorganisms versus stony materials: a love–hate relationship (2010) (40)
- Strength and durability of high-volume fly ash concrete (2008) (40)
- Autogenous Healing in Strain-Hardening Cementitious Materials With and Without Superabsorbent Polymers: An 8-Year Study (2019) (38)
- Service life and global warming potential of chloride exposed concrete with high volumes of fly ash (2017) (38)
- Addressing the need for standardization of test methods for self-healing concrete: an inter-laboratory study on concrete with macrocapsules (2020) (37)
- Neutron Radiography Based Visualization and Profiling of Water Uptake in (Un)cracked and Autonomously Healed Cementitious Materials (2016) (37)
- Purdocement: application of alkali-activated slag cement in Belgium in the 1950s (2015) (37)
- The effects of silicon dioxide, iron(III) oxide and copper oxide nanomaterials on the properties of self-compacting mortar containing fly ash (2015) (37)
- Effective and sustainable use of municipal solid waste incineration bottom ash in concrete regarding strength and durability (2021) (36)
- Influence of intensive vacuum mixing and heat treatment on compressive strength and microstructure of reactive powder concrete incorporating secondary copper slag as supplementary cementitious material (2017) (36)
- Use of fly ash or silica fume to increase the resistance of concrete to feed acids (1997) (35)
- Quantification of the Service Life Extension and Environmental Benefit of Chloride Exposed Self-Healing Concrete (2016) (35)
- A kinetic model for turgor loss in red cabbage cells during mild heat treatment. (2000) (35)
- Capsules with evolving brittleness to resist the preparation of self-healing concrete (2016) (35)
- USE OF PHYSICO‐CHEMICAL METHODS FOR ASSESSMENT OF SENSORY CHANGES IN CARROT TEXTURE AND SWEETNESS DURING COOKING (2002) (35)
- Fracture energy of coarse recycled aggregate concrete using the wedge splitting test method: influence of water-reducing admixtures (2017) (34)
- A Survey on Concrete Floors in Pig Houses and their Degradation (1997) (33)
- Concrete floor-bovine claw contact pressures related to floor roughness and deformation of the claw. (2006) (33)
- Estado del arte de los materiales a base de cemento que contienen TiO2: propiedades auto-limpiantes (2010) (32)
- Waste fibrecement: An interesting alternative raw material for a sustainable Portland clinker production (2012) (32)
- Combined use of superabsorbent polymers and nanosilica for reduction of restrained shrinkage and strength compensation in cementitious mortars (2020) (31)
- The regeneration of cement out of Completely Recyclable Concrete: clinker production evaluation (2013) (30)
- Performance of BFS concrete: k-Value concept versus equivalent performance concept (2013) (30)
- Development of a low pH cementitious material to enlarge bioreceptivity (2014) (29)
- Influence of chlorides on magnesium sulphate attack for mortars with Portland cement and slag based binders (2017) (29)
- Calibrated quantitative thermogravimetric analysis for the determination of portlandite and calcite content in hydrated cementitious systems (2017) (29)
- Self-healing of cracks in concrete (2011) (29)
- Role of the surface chemistry of the adsorbent on the initialization step of the water sorption process (2016) (29)
- Application of encapsulated superabsorbent polymers in cementitious materials for stimulated autogenous healing (2017) (28)
- Cradle-to-gate life cycle assessment of self-healing engineered cementitious composite with in-house developed (semi-)synthetic superabsorbent polymers (2018) (28)
- RESISTANCE OF CONCRETE WITH LIMESTONE SAND OR POLYMER ADDITIONS TO FEED ACIDS (1998) (28)
- Bacteriogenic Sulfuric Acid Attack of Cementitious Materials in Sewage Systems (2013) (27)
- Mechanical properties, crystallinity, and self-nucleation of carbon nanotube-polyurethane nanocomposites (2019) (27)
- Evaluation of the Self-Healing Ability of Mortar Mixtures Containing Superabsorbent Polymers and Nanosilica (2020) (27)
- Characterisation of Claw¿floor Contact Pressures for Standing Cattle and the Dependency on Concrete Roughness (2003) (26)
- Autogenous Healing in Cementitious Materials with Superabsorbent Polymers Quantified by Means of NMR (2020) (26)
- Determination of strength and debonding energy of a glass-concrete interface for encapsulation-based self-healing concrete (2017) (26)
- Feasibility study on the use of cellular concrete as alternative raw material for Portland clinker production (2013) (26)
- Monitoring fresh concrete by ultrasonic transmission measurements: exploratory multi-way analysis of the spectral information (2009) (25)
- Bond strength between concrete and repair mortar and its relation with concrete removal techniques and substrate composition (2020) (25)
- Bond strength between concrete and repair mortar and its relation with concrete removal techniques and substrate composition (2020) (25)
- The Contribution of Elastic Wave NDT to the Characterization of Modern Cementitious Media (2020) (25)
- Evaluation of natural colonisation of cementitious materials: effect of bioreceptivity and environmental conditions. (2015) (25)
- Nitrite producing bacteria inhibit reinforcement bar corrosion in cementitious materials (2018) (25)
- The microstructure of capsule containing self-healing materials: A micro-computed tomography study (2016) (25)
- Use of Secondary Slags in Completely Recyclable Concrete (2015) (25)
- Quantitative analysis on porosity of reactive powder concrete based on automated analysis of back-scattered-electron images (2019) (25)
- Ultrasonic transmission to monitor setting and hardening of fly ash concrete (2008) (25)
- The impact of slag fineness on the reactivity of blended cements with high-volume non-ferrous metallurgy slag (2020) (25)
- Most recent advances in the field of self-healing cementitious materials (2013) (24)
- Recovery against Environmental Action (2013) (24)
- Mechanical and self-healing properties of cementitious materials with pH-responsive semi-synthetic superabsorbent polymers (2017) (24)
- Differences in chewing sounds of dry-crisp snacks by multivariate data analysis (2003) (24)
- Relating ultrasonic measurements on fresh concrete with mineral additions to the microstructure development simulated by Cemhyd3D (2011) (24)
- Pre-treatment and utilisation of municipal solid waste incineration bottom ashes towards a circular economy (2020) (24)
- Combinatory approach of methacrylated alginate and acid monomers for concrete applications. (2017) (24)
- Parameter Study of Superabsorbent Polymers (SAPs) for Use in Durable Concrete Structures (2019) (24)
- Numerical model for the combined simulation of heat transfer and enzyme inactivation kinetics in cylindrical vegetables. (2001) (23)
- Single and combined effects of nano-SiO 2 , nano-Al 2 O 3 and nano-TiO 2 on the mechanical , rheological and durability properties of self-compacting mortar containing fly ash (2015) (23)
- Preparation of polyurethane composites reinforced with halloysite and carbon nanotubes (2020) (23)
- Sealing efficiency of cement-based materials containing extruded cementitious capsules (2020) (22)
- Sustainable High Quality Recycling of Aggregates from Waste-to-Energy, Treated in a Wet Bottom Ash Processing Installation, for Use in Concrete Products (2015) (22)
- Comparison of different techniques to study the nanostructure and the microstructure of cementitious materials with and without superabsorbent polymers (2019) (22)
- TiO2 coatings synthesized by liquid flame spray and low temperature sol–gel technologies on autoclaved aerated concrete for air-purifying purposes (2014) (22)
- Feasibility study on real-scale, self-healing concrete slab by developing a smart capsules network and assessed by a plethora of advanced monitoring techniques (2019) (21)
- Capillary imbibition in mortars with natural pozzolan, limestone powder and slag evaluated through neutron radiography, electrical conductivity, and gravimetric analysis (2019) (21)
- The hydration of cement regenerated from Completely Recyclable Concrete (2014) (21)
- Rheological behaviour of ultra-high performance cementitious composites containing high amounts of silica fume (2018) (19)
- Concrete fracture toughness increase by embedding self-healing capsules using an integrated experimental approach (2019) (19)
- Bacteria based concrete (2017) (19)
- Complete re-utilization of waste concretes–Valorisation pathways and research needs (2022) (19)
- Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates. A viable option for future concrete (2020) (19)
- Development of amine-based pH-responsive superabsorbent polymers for mortar applications (2017) (19)
- Effect of superabsorbent polymers and expansive additives on the shrinkage of alkali-activated slag (2021) (19)
- The influence of superabsorbent polymers on the microstructure and permeability of cementitious materials (2013) (19)
- Comparison of liquid absorption-release of superabsorbent polymers in alkali-activated slag and Portland cement systems: An NMR study combined with additional methods (2021) (18)
- Volume Fraction, Thickness, and Permeability of the Sealing Layer in Microbial Self-Healing Concrete Containing Biogranules (2018) (18)
- Activation of Pozzolanic and Latent-Hydraulic Reactions by Alkalis in Order to Repair Concrete Cracks (2015) (18)
- Hydration of blended cement with high volume iron-rich slag from non-ferrous metallurgy (2022) (18)
- Stability of Pluronic® F127 bismethacrylate hydrogels: Reality or utopia? (2017) (18)
- Halloysite‐reinforced thermoplastic polyurethane nanocomposites: Physico‐mechanical, rheological, and thermal investigations (2020) (18)
- Frictional Interactions between Bovine Claw and Concrete Floor (2007) (18)
- Enhanced impact energy absorption in self-healing strain-hardening cementitious materials with superabsorbent polymers (2018) (18)
- Evaluation of the Algaecide Activity of Titanium Dioxide on Autoclaved Aerated Concrete (2009) (18)
- Techniques applied to the study of microbial impact on building materials (2005) (18)
- Full probabilistic service life prediction and life cycle assessment of concrete with fly ash and blast-furnace slag in a submerged marine environment: a parameter study (2012) (17)
- On-Farm Trial to Determine the Durability of Different Concrete Slats for Fattening Pigs (1997) (17)
- The effect of superabsorbent polymers on the mitigation of plastic shrinkage cracking of conventional concrete, results of an inter-laboratory test by RILEM TC 260-RSC (2020) (17)
- A Review on Application of Waste Tire in Concrete (2016) (17)
- Microorganisms versus stony materials: a love–hate relationship (2010) (16)
- Ground granulated blast-furnace slag (2018) (16)
- Recommendation of RILEM TC 238-SCM: determination of the degree of reaction of siliceous fly ash and slag in hydrated cement paste by the selective dissolution method (2018) (16)
- Chloride interaction with concretes subjected to a permanent splitting tensile stress level of 65 (2016) (16)
- Complementing urea hydrolysis and nitrate reduction for improved microbially induced calcium carbonate precipitation (2019) (16)
- Assessment of the potential of superabsorbent polymers as internal curing agents in concrete by means of optical fiber sensors (2020) (16)
- Screening of Different Encapsulated Polymer-Based Healing Agents for Chloride Exposed Self-Healing Concrete Using Chloride Migration Tests (2018) (16)
- Screening of Different Encapsulated Polymer-Based Healing Agents for Chloride Exposed Self-Healing Concrete Using Chloride Migration Tests (2018) (16)
- Efficiency of self-healing cementitious materials with encapsulated polyurethane to reduce water ingress through cracks (2018) (15)
- The influence of sodium and magnesium sulphate on the penetration of chlorides in mortar (2017) (15)
- Early age autogenous shrinkage cracking risk of an ultra-high performance concrete (UHPC) wall: Modelling and experimental results (2021) (15)
- Test Methods for Resistance of Concrete to Sulfate Attack – A Critical Review (2013) (15)
- Waste steel wires modified structural lightweight concrete (2014) (14)
- Polymer action on alkali–silica reaction in cement mortar (2013) (14)
- A review of vascular networks for self-healing applications (2021) (14)
- Resistance of concrete containing styrol acrylic acid ester latex to acids occurring on floors for livestock housing (1998) (14)
- A plant based LCA of high-strength prestressed concrete elements and the assessment of a practical ecological variant (2016) (14)
- Microbial ureolytic calcium carbonate precipitation for remediation of concrete surfaces (1993) (14)
- Discussing Different Approaches for the Time-Zero as Start for Autogenous Shrinkage in Cement Pastes Containing Superabsorbent Polymers (2019) (14)
- Viability determination of Bacillus sphaericus after encapsulation in hydrogel for self-healing concrete via microcalorimetry and in situ oxygen concentration measurements (2021) (14)
- Paving with Precast Concrete Made with Recycled Mixed Ceramic Aggregates: A Viable Technical Option for the Valorization of Construction and Demolition Wastes (CDW) (2018) (14)
- Self‐repair of thermal cracks in concrete sandwich panels (2015) (14)
- Monitoring the effect of admixtures on early-age concrete behaviour by ultrasonic, calorimetric, strength and rheometer measurements (2011) (13)
- Fines extracted from porphyry and dolomitic limestone aggregates production: MgO as fluxing agent for a sustainable Portland clinker production (2013) (13)
- Analysis and visualization of water uptake in cracked and healed mortar by water absorption tests and X-ray radiography (2015) (13)
- The Use of Superabsorbent Polymers in High Performance Concrete to Mitigate Autogenous Shrinkage in a Large-Scale Demonstrator (2020) (13)
- Effect of superabsorbent polymers, superplasticizer and additional water on the setting of cementitious materials (2014) (13)
- Durability related functional units for life cycle assessment of high-volume fly ash concrete (2010) (13)
- Severe Sulfuric Acid Attack on Self-Compacting Concrete with Granulometrically Optimized Blast-Furnace Slag-Comparison of Different Test Methods (2020) (13)
- Autogenous healing of cracks in cementitious materials with varying mix compositions (2009) (13)
- Characterization of methacrylated polysaccharides in combination with amine-based monomers for application in mortar. (2017) (13)
- A critical review on test methods for evaluating the resistance of concrete against sulfate attack (2009) (13)
- The Influence of Superabsorbent Polymers and Nanosilica on the Hydration Process and Microstructure of Cementitious Mixtures (2020) (12)
- Superabsorbent polymers to prevent water movement in cementitious materials (2012) (12)
- In-situ crosslinking of superabsorbent polymers as external curing layer compared to internal curing to mitigate plastic shrinkage (2020) (12)
- Translucent self-healing cementitious materials using glass fibers and superabsorbent polymers (2020) (12)
- Evaluation of methods for testing concrete degradation in aggressive solutions (2007) (12)
- Applying a biodeposition layer to increase the bond of a repair mortar on a mortar substrate. (2018) (12)
- Recent developments in research on biogenic sulfuric acid attack of concrete (2000) (12)
- The effect of concrete floor roughness on bovine claws using finite element analysis. (2008) (12)
- Accelerated and natural carbonation of concrete with high volumes of fly ash: chemical, mineralogical and microstructural effects (2019) (12)
- Recommendation of RILEM TC 246-TDC: test methods to determine durability of concrete under combined environmental actions and mechanical load (2017) (12)
- Proposed mechanism for the formation of oxychloride crystals during sodium chloride application as a deicer salt in carbonated concrete (2016) (12)
- Internal curing of cement pastes by means of superabsorbent polymers visualized by neutron tomography (2021) (12)
- Compounds aggressive to concrete floors in pig houses (1996) (12)
- Review and discussion of polymer action on alkali–silica reaction (2013) (11)
- Microbial interactions with mineral building materials (2013) (11)
- Biocatalytical processes on concrete: bacterial cleaning and repair (2005) (11)
- Acrylate-endcapped polymer precursors: effect of chemical composition on the healing efficiency of active concrete cracks (2017) (11)
- Non-destructive testing techniques to evaluate the healing efficiency of self-healing concrete at lab-scale (2016) (11)
- Evaluation of experimental methodology to assess the sealing efficiency of bacteria-based self-healing mortar : Round robin test (2016) (11)
- Non-destructive testing techniques to evaluate the healing efficiency of self-healing concrete at lab-scale (2016) (11)
- Ultrasonic monitoring of setting and autogenous shrinkage development of high performance concrete (2008) (11)
- Bacterial carbonate precipitation reduces the permeability of cementitious materials (2007) (10)
- Environmental and economic sustainability of crack mitigation in reinforced concrete with SuperAbsorbent polymers (SAPs) (2022) (10)
- Influence of Vacuum Mixing on the Carbonation Resistance and Microstructure of Reactive Powder Concrete Containing Secondary Copper Slag as Supplementary Cementitious Material (SCM) (2016) (10)
- Life cycle assessment applied to recycled aggregate concrete (2019) (10)
- Concrete attack by feed acids: acclerated tests to compare different concrete compositions and technologies (1997) (10)
- Evaluation and comparison of traditional methods and Electron Probe Micro Analysis (EPMA) to determine the chloride ingress perpendicular to cracks in self-healing concrete (2019) (10)
- X‐ray Radiography to Visualize the Rebar–Cementitious Matrix Interface and Judge the Delay in Corrosion through Self‐Repair by Encapsulated Polyurethane (2018) (10)
- Freeze-thaw resistance of concrete containing mixed aggregate and construction and demolition waste-additioned cement in water and de-icing salts (2020) (10)
- Recycling of construction materials (2007) (10)
- Effect of Polyurethane Viscosity on Self-Healing Efficiency of Cementitious Materials Exposed to High Temperatures from Sun Radiation (2018) (10)
- Feasibility Study of the Use of Concrete Sludge As Alternative Raw Material for Portland Clinker Production (2015) (10)
- Durability of self-healing concrete (2019) (9)
- Accelerated and natural carbonation of concrete with high volumes of fly ash: chemical, mineralogical and microstructural effects. (2019) (9)
- Chloride ingress for concrete containing blast-furnace slag, related to microstructural parameters (2009) (9)
- Waterproofing of Concrete Foundations (2014) (9)
- A comparative study of the durability of ordinary Portland cement concrete and concrete containing (high) percentages of blast-furnace slag (2010) (9)
- Innovative SuperAbsorbent Polymers (iSAPs) to construct crack-free reinforced concrete walls: an in-field large-scale testing campaign (2021) (9)
- Interaction between the pozzolanic reaction of fly ash and the hydration of cement (2007) (9)
- Portuguese Irrigation Canals: Lining Solutions, Anomalies, and Rehabilitation (2012) (9)
- Susceptibility of biocalcite-modified fiber cement to biodeterioration (2015) (9)
- Characterization of methacrylated alginate and acrylic monomers as versatile SAPs. (2017) (9)
- Sulfates in Completely Recyclable Concrete and the effect of CaSO4 on the clinker mineralogy (2017) (9)
- Recovery against Mechanical Actions (2013) (9)
- The behaviour of suberabsorbing polymers as a sealing agent in concrete: absorption kinetics, degradation and water permeability (2011) (9)
- Life cycle assessment of a column supported isostatic beam in high-volume fly ash concrete (HVFA concrete) (2010) (9)
- Service life estimation of cracked and healed concrete in marine environment (2016) (9)
- Resilient denitrifiers wink at microbial self-healing concrete (2014) (9)
- Mixing protocols for plant‐scale production of concrete with superabsorbent polymers (2020) (8)
- Multicompound Model for the Hydration of Portland Cement–Fly Ash Binders (2011) (8)
- Use of Acoustic Emission Analysis to Evaluate the Self-Healing Capability of Concrete (2013) (8)
- Development of an improved cracking method to reduce the variability in testing the healing efficiency of self-healing mortar containing encapsulated polymers (2018) (8)
- Properties of Alkali Activated Lightweight Aggregate Generated from Sidoarjo Volcanic Mud (Lusi), Fly Ash, and Municipal Solid Waste Incineration Bottom Ash (2020) (8)
- Influence of sustained compressive load on the carbonation of concrete containing blast furnace slag (2022) (8)
- Sustainability assessment of potentially ‘green’ concrete types using life cycle assessment (2017) (8)
- Self-healing of dynamic concrete cracks using polymer precursors as encapsulated healing agents (2014) (8)
- How to seal and heal cracks in cementitious materials by using superabsorbent polymers (2014) (8)
- Determination of the degree of reaction of fly ash in blended cement pastes (2015) (8)
- Self-healing of dynamic concrete cracks using polymer precursors as encapsulated healing agents (2014) (8)
- Effect of the Mechanical Load on the Carbonation of Concrete: A Review of the Underlying Mechanisms, Test Methods, and Results (2021) (8)
- Natural and accelerated carbonation behaviour of high-volume fly ash (HVFA) mortar: Effects on internal moisture, microstructure and carbonated phase proportioning (2020) (8)
- Ultrasonic monitoring of setting and hardening behaviour of concrete and mortar with blast furnace slag cement (2007) (8)
- Ureolysis and denitrification based microbial strategies for self-healing concrete (2014) (7)
- A synergistic approach to microbial presence on concrete: cleaning and consolidating effects (2006) (7)
- Chloride diffusion tests as experimental basis for full probabilistic service life prediction and life-cycle assessment of concrete with fly ash in a submerged marine environment (2012) (7)
- Resistance of concrete against combined attack of chlorides and sulphates (2012) (7)
- Durability of concrete bearing polymer-treated mixed recycled aggregate (2022) (7)
- Turgor changes in red cabbage during mild heat treatment. (2000) (7)
- Reactivity Assessment of Modified Ferro Silicate Slag by R3 Method (2021) (7)
- Application of TiO2 Photocatalysis to Cementitious Materials for Self-Cleaning Purposes (2011) (7)
- Evaluation of different ultrasound transmission parameters to monitor microstructure development in fresh concrete or mortar (2006) (7)
- Bacteria as protagonists for concrete: bacterial cleaner and bacterial builder (2005) (7)
- Durability behavior of high-volume fly ash concrete (2007) (7)
- Lucas-Washburn vs Richards equation for the modelling of water absorption in cementitious materials (2018) (7)
- Microbial self-healing concrete: denitrification as an enhanced and environment-friendly apporach (2015) (7)
- Durability of building materials and components in agricultural environments (1999) (7)
- Comparison of different beneficiation techniques to improve utilization potential of Municipal Solid Waste Incineration fly ash concrete (2017) (7)
- Self‐Healing Materials are Coming of Age (2018) (7)
- Resistance to chloride penetration of self-healing concrete with encapsulated polyuretyhane (2016) (7)
- Concrete for a Sustainable Agriculture. Agro-, Aqua- and Community applications (2002) (7)
- Effect of copper slag as supplementary cementitious material (SCM) in ultra high performance mortar (UHPM) (2015) (6)
- Non-Destructive and Destructive Firmness Measurements on Apples and Peaches (2000) (6)
- Evaluation of anti-fouling strategies on aerated concrete by means of an accelerated algal growth test (2008) (6)
- Life cycle assessment of self-healing engineered cementitious composite (SH-ECC) used for the rehabilitation of bridges (2018) (6)
- The effect of superabsorbent polymers on the cracking behavior due to autogenous shrinkage of cement-based materials (2018) (6)
- Sustainability effects of including concrete cracking and healing in service life prediction for marine environments (2016) (6)
- Firmness changes of pear fruit on the tree with the acoustic impulse response technique (2000) (6)
- Enhanced durability performance of cracked and uncracked concrete by means of smart in-house developed superabsorbent polymers with alkali-stable and -unstable crosslinkers (2021) (6)
- Bacteria protect and heal concrete and stone (2009) (6)
- Visualization Of The Healing Process OnReinforced Concrete Beams By Application OfDigital Image Correlation (DIC) (2013) (6)
- Ultrasonic and calorimetric measurements on fresh concrete with blast-furnace slag (2007) (6)
- Biological repair of damaged concrete and mortar surfaces: biomineralisation (2003) (6)
- Pore Size Distribution and Surface Multifractal Dimension by Multicycle Mercury Intrusion Porosimetry of GGBFS and Limestone Powder Blended Concrete (2021) (6)
- Application of microorganisms in concrete: a promising sustainable strategy to improve concrete durability (2016) (6)
- From lab scale to in situ applications: the ascent of a biogenic carbonate based surface treatment (2014) (5)
- Self-healing concrete by means of encapsulated polymers (2010) (5)
- Measurement of Surface Erosion of Concrete Slats (1995) (5)
- Experimental techniques used to verify healing (2013) (5)
- Autogenous shrinkage development and setting monitoring of slag cement concrete (2008) (5)
- Treatment with nano-silica and bacteria to restore the reduced bond strength between concrete and repair mortar caused by aggressive removal techniques (2021) (5)
- An Investigation of Suitable Healing Agents for Vascular-Based Self-Healing in Cementitious Materials (2021) (5)
- Enhanced self-healing capacity in cementitious materials by use of encapsulated carbonate precipitating bacteria: from proof-of-concept to reality (2013) (5)
- Surface Consolidation of Maastricht Limestone by Means of Bacillus Sphaericus under Varying Treatment Conditions (2020) (5)
- Hydrogel encapsulated bacterial spores for self-healing concrete: Proof of concept (2013) (5)
- Influence of sulphates on chloride diffusion and the effect of this on service life prediction of concrete in a submerged marine environment (2012) (5)
- Pressures and deformations of bunker silo walls (2007) (5)
- Self-healing concrete by the internal release of adhesive from hollow glass fibres embedded in the matrix (2009) (5)
- Simulation of corrosion in sewer systems by laboratory testing (2001) (5)
- Evaluation of the Efficiency of Self-Healing in Concrete by Means of µ-CT (2013) (5)
- Particle size distribution and specific surface area of SCM's compared through experimental techniques (2016) (5)
- Elastic Wave Monitoring of Cementitious Mixtures Including Internal Curing Mechanisms (2021) (5)
- Outcomes of the RILEM round robin on degree of reaction of Slag and fly ash in composite cements (2016) (5)
- Treatment with nano-silica and bacteria to restore the reduced bond strength between concrete and repair mortar caused by aggressive removal techniques (2021) (5)
- A review of the efficiency of self-healing concrete technologies for durable and sustainable concrete under realistic conditions (2023) (5)
- Resistance of cracked concrete to chloride attack (2013) (5)
- Reservoir-Vascular Tubes Network for Self-Healing Concrete: Performance Analysis by Acoustic Emission, Digital Image Correlation and Ultrasound Velocity (2022) (4)
- The Durability of Mortar Containing Alkali Activated Fly Ash-Based Lightweight Aggregate (2021) (4)
- Influence of sample preparation and the addition of BFS on water vapour sorption isotherms (2011) (4)
- In Situ Characterization of Damaging Soluble Salts in Wall Construction Materials (2015) (4)
- Effect of wastes as supplementary cementitious materials on the transport properties of concrete (2021) (4)
- Acid resistance of concrete containing blast-furnace slag: influence of the pore structure and hydration process (2009) (4)
- Recommendation of RILEM TC 246-TDC: test methods to determine durability of concrete under combined environmental actions and mechanical load (2012) (4)
- The assessment of clinker and cement regenerated from completely recyclable concrete (2011) (4)
- Vascular self-healing of a reinforced concrete beams under 4-point bending (2017) (4)
- Effect of sample age on the self-healing properties of cementitious mateials with superabsorbent polymers (2016) (4)
- Granules with activated compact denitrifying core (ACDC) for self-healing concrete with corrosion protection functionality (2018) (4)
- Screening encapsulated polymeric healing agents for carbonation-exposed self-healing concrete, service life extension and environmental benefit (2018) (4)
- DYNAMIC LOADING PERFORMANCE OF FIBRE ENGINEERED CEMENTITIOUS MATERIALS WITH SELF-HEALING CAPACITY (SH-FECM) (2020) (4)
- Mitigating plastic shrinkage cracking in alkali-activated slag systems by internal curing with superabsorbent polymers (2022) (4)
- What makes fruit firm and how to keep it that way (2000) (4)
- Pore structure of mortars containing limestone powder and natural pozzolan assessed through mercury intrusion porosimetry and dynamic vapour sorption (2018) (4)
- Screening encapsulated polymeric healing agents for carbonation-exposed self-healing concrete, service life extension and environmental benefit (2018) (4)
- The effect of chemical and biogenic sulfuric acid on different types of concrete for sewer pipes. (2002) (4)
- Concrete structures under impact loading : General aspects (2016) (4)
- Modelling of microstructure of Portland cement: fly ash binders based on calorimetric and thermogravimetric experiments (2011) (4)
- Durability based life cycle assessment of concrete with supplementary cementitious materials exposed to carbonation (2015) (4)
- The effect of (and the potential of recycled) superabsorbent polymers on the water retention capability and bio-receptivity of cementitious materials (2022) (4)
- Self-healing of thermal cracks in sandwich panels (2013) (4)
- The influence of SAPs on chloride ingress in cracked concrete (2019) (4)
- Evaluation of the performance of self-healing concrete at small and large scale under laboratory conditions (2017) (3)
- Crack repair by activation of the pozzolanic or slag reaction (2012) (3)
- Investigating the efficiency of 'in-house' produced hydrogels as internal curing agents in cement pastes (2019) (3)
- Effect of fibre type and superabsorbent polymers on the self-healing properties of strain-hardening cementitious materials (2015) (3)
- Influence of particle size distribution of slag, limestone and fly ash on early hydration of cement assessed by isothermal calorimetry (2016) (3)
- Design of polymeric capsules for autonomous healing of cracks in cementitious materials (2013) (3)
- Monitoring the setting of concrete by measuring the change in ultrasonic p-wave energy (2009) (3)
- Durable concrete structures with cracks which heal themselves (2012) (3)
- Healcon: Self-healing concrete to create durable and sustainable concrete structures (2013) (3)
- Numerical modeling of the carbonation depth of meso-scale concrete under sustained loads considering stress state and damage (2022) (3)
- Bacterial cleaning of concrete surfaces (2003) (3)
- Durability of self-healing cementitious systems with encapsulated polyurethane evaluated with a new pre-standard test method (2022) (3)
- MICROSTRUCTURE OF HIGH-VOLUME FLY ASH CONCRETE (2008) (3)
- CHLORIDE INGRESS IN HIGH-VOLUME FLY ASH CONCRETE (2008) (3)
- Experimental Characterization of the Self-Healing Capacity of Cement Based Materials: An Overview (2018) (3)
- Report of RILEM TC 267—TRM: Improvement and robustness study of lime mortar strength test for assessing reactivity of SCMs (2022) (3)
- Testing for degradation by inorganic acids (2013) (3)
- Sustainable cements in construction: magnesium phosphate cements to stimulate colonization by photosynthetic organisms of building materials (2017) (3)
- Mechanical Performance of Liquid-Applied Roof Waterproofing Systems (2013) (3)
- Modelling the hydration heat of Portland cement blended with blast-furnace slag (2008) (3)
- In situ enrichment of carbonate producing bacteria for biodeposition in practice (2008) (3)
- A mirobial based system developed for self-healing concrete cracks (2011) (3)
- The cost and environmental impact of service life extening self-healing engineered materials for sustainable steel reinforced concrete (2016) (3)
- Self-healing efficiency of cement-based materials containing extruded cementitious hollow tubes filled with bacterial healing agent (2018) (3)
- Valorization of secondary copper slag as aggregate and cement replacement in ultra-high performance concrete (2022) (2)
- Model for heat release of fly ash - Cement pastes (2008) (2)
- Full probabilistic service life prediction and life cycle assessment of concrete with industrial by-products in a submerged marine environment: a parameter study (2011) (2)
- Self-healing concrete with encapsulated polyurethane (2017) (2)
- Properties of Concrete with Recycled Aggregates Giving a Second Life to Municipal Solid Waste Incineration Bottom Ash Concrete (2022) (2)
- Comparison of reaction degrees of slag and fly ash obtained by thermogravimetry and selective dissolution (2016) (2)
- Influence of air entraining agents (AEAs) on deicing salt scaling resistance of high-volume fly ash concrete (HVFA concrete) (2011) (2)
- Design and testing of tubular polymeric capsules for self-healing of concrete (2017) (2)
- Bacteria-based self-healing concrete exposed to frost salt scaling (2023) (2)
- How concrete removal techniques affect the bonding between concrete and repair mortar (2019) (2)
- Evaluation of the self-healing effect of mortar containing polymeric healing agents (2015) (2)
- Mechanical and thermal behaviour of alkali-activated high volume fly ash concrete (2008) (2)
- Design and testing of tubular polymeric capsules for self-healing of concrete (2017) (2)
- Thermal analysis of cement-fly ash pastes (2007) (2)
- Towards encapsulation of thiol-ene mixtures: Synthesis of thioacetate cross-linker for in-situ deprotection (2019) (2)
- NON-DESTRUCTIVE TESTING TECHNIQUES FOR THE OBSERVATION OF HEALING EFFECTS IN CEMENTITIOUS MATERIALS - AN INTRODUCTION (2013) (2)
- ICSHM 2013: Proceedings of the 4th International Conference on Self-Healing Materials, Ghent, Belgium, 16-20 June 2013 (2013) (2)
- Damage detection and healing performance monitoring using embedded piezoelectric transducers in large-scale concrete structures (2016) (2)
- Resistance to fatigue of self-healed concrete based on encapsulated polymer precursors (2016) (2)
- Accelerated degradation testing of concrete in acidic environment: resistance to lactic and sulfuric acid (2002) (2)
- Resistance to fatigue of self-healed concrete based on encapsulated polymer precursors (2016) (2)
- How concrete removal techniques affect the bonding between concrete and repair mortar (2019) (2)
- Method development for the particle size analysis of supplementary cementitious materials (2014) (2)
- Concrete fracture energy increase by embedding capsules with healing ability : the effect of capsules nature (2017) (2)
- Monitoring of autonomous healing process of concrete by acoustic emission and digital image correlation (2013) (2)
- Increasing the reactivity of modified ferro silicate slag by chemical adaptation of the production process (2019) (2)
- Effects of Accelerated Carbonation Testing and by-Product Allocation on the CO2-Sequestration-to-Emission Ratios of Fly Ash-Based Binder Systems (2021) (2)
- The use of fly ash in completely recyclable concrete (2010) (2)
- Influence of crack width limitation on the chloride penetration resistance and global warming potential of concrete slabs (2013) (2)
- A HYDRATION STUDY BY XRD/RIETVELD ANALYSIS OF CEMENT REGENERATED FROM COMPLETELY RECYCLABLE CONCRETE (2014) (2)
- The 'Greenness' of high-volume fly ash (HVFA) concrete when exposed to carbonation (2011) (2)
- Construction and Building Materials (2015) (2)
- Internal curing of cement pastes by superabsorbent polymers studied by means of neutron radiography (2017) (2)
- Real-scale testing of the efficiency of self-healing concrete (2015) (2)
- Report of RILEM TC 281-CCC: outcomes of a round robin on the resistance to accelerated carbonation of Portland, Portland-fly ash and blast-furnace blended cements (2022) (2)
- Smart superabsorbent polymers for self-sealing and -healing of mortar (2015) (2)
- Effect of chain extender length and molecular architecture on phase separation and rheological properties of ether-based polyurethanes (2021) (2)
- Chemical and microbiological corrosion tests on polymer modified concrete (2001) (2)
- Microscopic study on concrete attacked by organic acids (1997) (2)
- Strength related global warming potential of fly ash (+ silica fume) concrete with(out) mass/economic allocation of the by-products' impact (2012) (2)
- Effect of superplasticizers on hydration and setting behaviour of cements (2009) (2)
- Evaluation of the self-healing effect of mortar containing polymeric healing agents (2015) (2)
- The resistance of completely recyclable concrete to carbonation, chloride penetration and freeze-thaw attack with de-icing agents (2011) (2)
- Mechanical properties of bovine claw horn (2004) (2)
- Bacteria-Based Self-Healing Concrete: Effect of Bio-agents on the Cementitious Matrix (2018) (1)
- Healing depth and functionality regain of non-axenic granulated culture based self-healing concrete (2018) (1)
- Mechanical regains due to autogenic healing in cementitious materials (2015) (1)
- Microscopic investigation of mechanical regain origins due to autogenic healing in cementitious materials (2015) (1)
- Isothermal water vapour permeability of concrete with different supplementary cementitious materials (2018) (1)
- Completely recyclable concrete : how does the cement paste behave during reclinkering? (2012) (1)
- Moving towards a realistic implementation of self-healing concrete based on encapsulated polymer precursors (2016) (1)
- Monitoring the reduction in shrinkage cracking of mortars containing superabsorbent polymers (2017) (1)
- SULPHATES IN COMPLETELY RECYCLABLE CONCRETE AND THEIR EFFECT ON THE CLINKER MINERALOGY (2014) (1)
- Kinetics of SAPs During Hardening, Drying and Healing in Cementitious Materials Studied by NMR (2019) (1)
- Effect of water availability on microbial self-healing of concrete (2014) (1)
- Repeated autogenous healing in cementitious composites with microfibres and superabsorbent polymers (2014) (1)
- Correlating the water adsorption mechanism at low relative pressures of activated carbons with cements (2014) (1)
- Self-healing of moving cracks in reinforced concrete based on encapsulated polymer precursors (2015) (1)
- Resistance of cracked concrete healed by means of polyurethane against chloride penetration (2013) (1)
- Performance based laboratory methods for testing concrete degradation in aggressive aqueous solutions (2006) (1)
- Assessment of the effect of nanosilica on the mechanical performance and durability of cementitious materials (2018) (1)
- Use of methacrylated alginate for self-healing concrete (2016) (1)
- Utility of pH-sensitive superabsorbent polymers in concrete repair (2014) (1)
- Limestone porosity determines the protective effect of a biogenic carbonate surface treatment (2011) (1)
- The effects of superabsorbent polymers on the water vapour sorption properties of cementitious materials (2015) (1)
- Broadening the water vapour absorption modeling of activated carbons towards cementitious materials (2013) (1)
- Experimental Techniques Synergy towards the Design of a Sensing Tool for Autonomously Healed Concrete (2018) (1)
- Hydrated lime life-cycle assessment: Current and future scenarios in four EU countries (2022) (1)
- Green Concrete: Optimization Of High-Strength Concrete Based On LCA (2015) (1)
- Exploring Different Choices of “Time Zero” in the Autogenous Shrinkage Deformation of Cement Pastes Containing Superabsorbent Polymers (2019) (1)
- Reactivity of modified iron silicate slag as sustainable alternative binder (2019) (1)
- Self-healing of concrete cracks by the release of embedded water repellent agents and corrosion inhibitors to reduce the risk for reinforcement corrosion (2017) (1)
- Tube shape alterations for improved concrete pouring survivability in vascular self-healing concrete (2016) (1)
- Smart Additives for Self-Sealing and Self-Healing Concrete (2012) (1)
- Measuring the roughness of a concrete floor and the contact pressures between claw and floor (2004) (1)
- Preventing reinforcement corrosion in cracked concrete by self-repair (2016) (1)
- Self-Healing Concrete Research in the European Projects SARCOS and SMARTINCS (2020) (1)
- Ultrasound monitoring of setting and hardening of shotcrete including alkali-rich or alkali-free accelerators (2005) (1)
- Factors Affecting the Monitoring of the Early Setting of Concrete by Ultrasonic P-Waves (2013) (1)
- Sustainable cements in construction: magnesium phosphate cements to stimulate colonization of building materials (2015) (1)
- Cleaning of concrete fouled by lichens with the aid ofThiobacilli (2005) (1)
- ON ADVANCES IN CONSTRUCTION MATERIALS AND SYSTEMS , ICACMS 2017 BOND ENHANCEMENT OF REPAIR MORTAR VIA BIODEPOSITION (2017) (1)
- Alginate- and sulfonate-based superabsorbent polymers for application in cementitious materials: Effects of kinetics on internal curing and other properties (2022) (1)
- Self-healing concrete to increase service life of a roof plate for an inspection pit in the Oosterweel link : healing efficiency and preliminary service life estimation (2018) (1)
- Parameters affecting the interaction between bovine claw and concrete floor (2004) (1)
- Influence of intensive vacuum mixing on the compressive strength of RPC containing secondary slag as cementitious materials (2016) (1)
- The ingress of chlorides in concrete under compressive or tensile loads (2015) (1)
- Alkali Activated Lightweight Aggregate as Bacterial Carrier in Manufacturing Self-Healing Mortar (2023) (1)
- Towards durable concrete that repairs cracks autonomously (2010) (1)
- Self-healing of moving cracks in reinforced concrete based on encapsulated polymer precursors (2015) (1)
- Biopolymers for self-sealing and -healing of mortar (2015) (1)
- Comparative study on different polymer tubes as carriers of healing agent for self-healing concrete (2015) (1)
- BLENDED WITH SUPPLEMENTARY CEMENTITIOUS MATERIALS ? (2016) (1)
- Cleaning of concrete fouled by algae with the aid of Thiobacili (2004) (1)
- Poly(aspartic acid) superabsorbent polymers as biobased and biodegradable additives for self-sealing of cementitious mortar (2022) (1)
- Evaluation of the self-healing efficiency of cracks in mortar by bioprecipitation or applications of hydrogels (2016) (1)
- Use of fibre-reinforced self-healing cementitious materials with superabsorbent polymers impact energy (2019) (1)
- Bio-based pH-responsive superabsorbent polymers for self-healing cracks in concrete (2016) (1)
- The pore structure of hydrating cementitious materials visualized and studied by NMR and MIP (2018) (1)
- When green is not clean (2010) (1)
- Durability Based Service Life Estimation for Chloride Exposed Cracked and Self-Healed Concrete (2020) (1)
- Setting Control of Completely Recyclable Concrete with Slag and Aluminate Cements (2016) (1)
- Contact pressure distribution between cattle claw and concrete floor as a measure of animal welfare. (2002) (1)
- Ultrasonic monitoring of setting and autogenous shrinkage of high performance concrete under isothermal temperature conditions (2010) (1)
- Gas transport and carbonation in high-volume fly ash concrete versus age at testing (2008) (1)
- Influence of the surface oxygen content of the material on the specific interactions taking place at the first stages of water sorption (2014) (1)
- A review on utilization of pozzolanic materials in microbial concrete (2018) (1)
- Microfibres and hydrogels to promote autogenous healing in cementitious materials (2013) (1)
- Ultrasound monitoring of the influence of pozzolanic additions and accelerating admixtures on setting and hardening behaviour of concrete and mortar (2006) (1)
- Application of pH-sensitive hydrogels for concrete applications (2013) (1)
- Reducing the risk of thermal cracking in cementitious materials by means of encapsulated phase-change materials (2017) (1)
- Investigation of the fracture cracking behavior of self-healing systems by use of optical and acoustic experimental methods (2013) (1)
- The influence of carbonation on deicer scaling resistance of blast furnace slag concrete (BFSC) (2014) (1)
- Capillary Imbibition in Cementitious Materials: Effect of Salts and Exposure Condition (2022) (1)
- Perpendicular-to-crack chloride ingress in cracked and autonomously healed concrete (2018) (1)
- Suitable yeast extract concentration for the production of self-healing mortar with expanded clay as bacterial carrier (2022) (1)
- The effect of chloride and sulfate on Completely Recyclable Concrete (2013) (1)
- Salt-Scaling Resistance of SAP-Modified Concrete Under Freeze–Thaw Cycles (2020) (1)
- Can self-repair of concrete cracks help to obtain durable concrete? (2014) (1)
- Chemical Shrinkage of Low Water to Cement (w/c) Ratio CEM I and CEM III Cement Pastes Incorporating Silica Fume and Filler (2021) (1)
- Influence of raw material fineness on clinker produced from Completely Recyclable Concrete (2013) (1)
- The efficiency of autonomous crack healing of mortar in chloride solutions (2014) (1)
- Self-healing concrete by use of diatomaceous earth immobilized bacteria (2011) (1)
- Self-healing concrete in aggressive enironments (2017) (1)
- Carbonation resistance of high-volume fly ash (HVFA) mortar : effect of applied CO2 concentration (2018) (1)
- Contact pressures and deformation of cattle claws in contact with a concrete floor (2005) (1)
- Microorganisms versus stony materials: a love-hate (2010) (1)
- Manual healing of cracks in concrete by the use of bacteria (2009) (1)
- Moving towards a realistic implementation of self-healing concrete based on encapsulated polymer precursors (2016) (1)
- Demonstration projects with self-healing capsule-based and bacteria-based concrete (2018) (1)
- Microbiologically induced cementation of CaCO3 nanoparticles for lime-stone conservation (2012) (1)
- Utilization of copper slag as a cementitious material in reactive powder concrete (2015) (1)
- The Effect of Concrete Containing Recycled Concrete Aggregate and Crushed Clay Bricks on Slab under Dynamic Loading (2014) (1)
- The influence of sodium and magnesium sulphate on the penetration of chlorides in mortar (2017) (1)
- Parameters affecting the interaction between cattle claw and concrete floor (2004) (1)
- Green self-healing of cracks in concrete (2016) (0)
- Pore Refinement Action of GGBFS and Fly Ash on the Primary and Secondary Capillary Imbibition Rates of Concrete (2020) (0)
- Chemical and microbiological degradation tests on concrete made with an without addition of polymer (1999) (0)
- Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques (2014) (0)
- Autonomous regeneration of concrete structures by incorporation of self-healing mechanisms (2015) (0)
- Bio-Based microstructural effects in view of durability of concrete and concrete structures (2012) (0)
- Effect of SCMs on capillarysorption over time : relation with dryingrate and testing time (2017) (0)
- Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements—results of a round robin test (2018) (0)
- Comparison of the application of isothermal and solution calorimetry for monitoring of the cement hydration (2009) (0)
- Thermal analysis in eco-concrete research (2012) (0)
- Outcomes of the RILEM round robin on degree of reaction of slag and fly ash in blended cements (2017) (0)
- Effect of chemical composition of polymeric precursors on the healing capability of cementitious materials (2015) (0)
- Influence of large volumes of fly ash on the hydration of cement pastes. (2005) (0)
- Service life based assessment of the global warming potential of concrete with supplementary cementitious materials (2013) (0)
- Global warming potential of carbonation/chloride exposed concrete with(out) consideration of the propagation period in service life assessment (2015) (0)
- A comparison of potential healing agents for vascular-based self-healing concrete (2023) (0)
- The sustainability profile of a biomimetic 3D printed vascular network to restore the structural integrity of concrete (2023) (0)
- Purdocement: application of alkali-activated slag cement in Belgium in the 1950s (2013) (0)
- Physical characterization methods for supplementary cementitious materials (2014) (0)
- Synchronous activitation of urea hydrolysis and denitrification for improving CaCO3 precipitation in bacteria based self-healing concrete (2019) (0)
- Self-healing approaches for the preventive repair of concrete structures: SARCOS COST Action (2017) (0)
- Air purification potential and weathering resistance of a TiO2 coating applied on aerated concrete (2011) (0)
- Variation on water permeability results of self-healing concrete studied by active crack width control technique (2019) (0)
- Non-axenic NO3-reducing culture supersedes axenic cultures in development of microbial self-healing concrete (2015) (0)
- Testing and modelling biogenic sulfuric acid corrosion of concrete sewer pipes in function of aggregate type, cement type and production method (2003) (0)
- Influence of fly ash on the hydration of cement pastes (2006) (0)
- Use of encapsulated healing agents to limit water uptake through crackis in mortar (2017) (0)
- Towards self-healing and self-cleaning concrete (2008) (0)
- Effect of curing age on the durability of high-volume fly ash concrete (2008) (0)
- Impact of bacterial carbonate precipitation on transport processes in concrete (2007) (0)
- <H1 Align="Center" Style="Text-Align:Center;Text-Indent:0cm"><Span Style="Font-Size:18.0pt">The Effect of Co<Sub>2</Sub> Concentration on the Carbonation of Blast Furnace Slag Concrete<O:P></O:P></Span></H1> (2022) (0)
- Procee,ICEM 2018 The 18th International Conference on Experimental Mechanics (ICEM 2018) Brussels, Belgium (2018) (0)
- Microscopy and computed micro-tomography for evaluation of microbial self-healing in concrete (2014) (0)
- Attack of concrete floors in pig houses by feed acids: influence of cement, aggregates, compaction, additions, cement-bound surface layers. (1996) (0)
- Fibrecement recycling as raw material for Portland clinker production (2012) (0)
- Properties of ordinary Portland cement clinker with municipal solid waste incineration bottom ash as raw meal additive (2019) (0)
- Bond behaviour evaluation between steel reinforcement and self-healing concrete containing non-axenic biomasses (2023) (0)
- Encapsulation of polymeric healing agents for self-healing concrete (2015) (0)
- Numerical proposals for the self-repairing assessment of ECC members (2018) (0)
- Influence of biochemical and chemical sulphuric acid attack on microstructure of polymer-cement mortar and concrete (2004) (0)
- Impact modifier toughening polymeric capsules for self-healing concrete : a study on type and content of impact modifier (2015) (0)
- Calibrated quantitative thermogravimetric analysis for the determination of portlandite and calcite content in hydrated cementitious systems (2017) (0)
- Comparison of different types of self-healing concrete under extreme conditions (2023) (0)
- Evaluation of the self-healing capacity of concrete with low-cost macro-capsules (2023) (0)
- Cement based materials and environmental approaches for a sustainable agriculture (CSA2015) (2015) (0)
- Influence of nanosilica on the mechanical properties and durability of cementitious materials (2018) (0)
- New findings on the contribution of Mg-Al-NO3 layered double hydroxides to the hydration and chloride binding capacity of cement pastes (2023) (0)
- Microstructural and Chemical Effects of Accelerated Carbonation of High-Volume Fly Ash Binders in View of Carbon Sequestration (2020) (0)
- Attack of the concrete slatted floors in the finishing pig houses (1998) (0)
- Durability of slatted concrete floors in houses for fattening pigs (1997) (0)
- ICSHM2013 Fourth international conference on self-healing materials (2013) (0)
- The hydration of ternary blended cements with Fe-rich slag from non-ferrous metallurgy and limestone (2023) (0)
- Predicting mechanical properties changes of vegetables due to a mild heat treatment by means of visible/NIR reflectance measurements. (2000) (0)
- Autogenous healing of cementitious materials promoted by superabsorbent polymers studied by means of X-ray computed microtomography (2015) (0)
- The Influence of Biochemical and Chemical Sulphuric Acid Corrosion on the Micro- Structure of Polymer Modified Mortar and Concrete. (2001) (0)
- Use of X-ray radiography and tomography to evaluate self-healing concrete (2015) (0)
- Insight into the secondary imbibition rate of concrete and its relationship with curing time (2020) (0)
- Acoustic Monitoring for Curing and Characterization of Advanced Cementitious Materials (2022) (0)
- Processed Municipal Solid Waste Incineration Ashes as Sustainable Binder for Concrete Products (2020) (0)
- Impact of Super Absorbent Polymers on Early Age Behavior of Ultra-HIgh Performance Concrete Walls (2019) (0)
- Effect of combined chloride-sulphate degradation and autogenous crack healing on durability of concrete elements (2015) (0)
- Effect of Ferronickel Slag as Cementitious Material on Strength of Mortar (2022) (0)
- Influence of nanoparticles in UHPC by intensive (vacuum) mixing studies (2014) (0)
- Concrete Repair, Rehabilitation and Retrofitting IV 4th International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR-4), 5-7 October 2015, Leipzig, Germany (1970) (0)
- Self-cleaning properties of cementitious materials by application of water repellent, biocidal or photocatalytic products (2009) (0)
- Ultrasonic wave energy and frequency spectrum as an alternative to wave velocity to monitor concrete or mortar setting (2009) (0)
- Long-Term Capillary Imbibition of Mortars with Slag and Fly Ash (2020) (0)
- Proceedings of the International RILEM Conference Materials, Systems and Structures in Civil Engineering 2016: Segment on Concrete with Supplementary Cementitious Materials (2016) (0)
- Ultrasonic wave transmission to monitor the performance of self-healing concrete based on encapsulated polymer precursors (2015) (0)
- Influence of Polymer Modification on Resistance of Concrete to Sulfuric Acid (2000) (0)
- Comparing pH-sensitive with commercial superabsorbent polymers in cementitious materials (2014) (0)
- Effect of supplementary cementitious materials on capillary sorption : relation with drying rate and testing time (2017) (0)
- X-ray tomography to visualise concrete degradation and (self)-healing (2010) (0)
- Cuantificacion mineralogica de cementos mediante analisis rietveld de Drx. analisis cruzado de difractogramas experimentales y programas de refinamiento : Mineralogical quantification of cements determined by Rietveld analysis of XRD : Cross analysis of experimental pattern and software for refineme (2016) (0)
- Algaecide activity of a titanium dioxide coating on cementitious materials (2008) (0)
- Autogenous Healing in Cementitious Materials with Superabsorbent Polymers Quantified by Means of NMR (2020) (0)
- Improving the quality of various types of recycled aggregates by biodesposition (2017) (0)
- Design and testing of anionic polymers for use in durable concrete structures (2019) (0)
- Retraction notice to “Effect of nano-CuO and fly ash on the properties of self-compacting mortar” [J. Constr. Build. Mater. 94 (2015) 758–766] (2021) (0)
- Carbonation of blast furnace slag concrete at different CO2 concentrations: Carbonation rate, phase assemblage, microstructure and thermodynamic modelling (2023) (0)
- Analysis of non-axenic biomasses for self-healing concrete (2023) (0)
- Evaluation of the self-sealing efficiency of cracks in mortar by bioprecipitation or application of hydrogels (2017) (0)
- Effect of Adding Carbon Nanotubes into the Matrix Material on the Aero-Thermo-Elastic Stability Region of Fibrous Laminates (2020) (0)
- Pore structure and its effects on the mechanical and durability properties of self-compacting mortar containing nano-Al2O3 and fly ash (2015) (0)
- Screening of pH-responsie hydrogels for encapsulation of bacteria for concrete crack self-healing (2018) (0)
- Resistencia de los hormigones elaborados con árido reciclado frente a ciclos de hielo-deshielo (2018) (0)
- Effectiveness of self-healing technologies in cement based materials : concept for an inter-laboratory experimental evaluation by multiple test methods : a proposal by Cost Action CA 15202 SARCOS (2018) (0)
- Bond Enhancement of Repair Mortar via Biodeposition | NIST (2017) (0)
- Chloride penetration in concrete under compression or splitting tensile load representing 60-65 per cent of the ultimate load (2016) (0)
- Assessment of Sustainability and Self-Healing Performances of Recycled Ultra-High-Performance Concrete (2023) (0)
- Nitrite producing bacteria inhibit reinforcement bar corrosion in cementitious materials (2018) (0)
- TC 238-SCM: hydration and microstructure of concrete with SCMs (2015) (0)
- A hybrid kinetic model for the heat release of Portland cement: fly ash binders (2010) (0)
- El uso de hormigones reciclados en el sector agroganadero (2018) (0)
- Evaluation and comparison of mechanical characteristics and durability of concrete with different cement replacement levels by fly ash (2005) (0)
- The microstructure of capsule containing self-healing materials : a micro-computed tomography approach (2016) (0)
- The water kinetics of superabsorbent polymers during cement hydration and internal curing visualized and studied by NMR (2017) (0)
- Self-healing and repair of concrete structures: COST action CA15202 SARCOS and lessons learnt from FP7 project HEALCON (2018) (0)
- Impact of Super Absorbent Polymers on Early Age Behavior of High Performance Concrete Walls (2021) (0)
- Self-healing concrete (2017) (0)
- Production of calcium carbonate-precipitating biomass powder as self-healing additive in concrete and performance evaluation in mortar (2023) (0)
- The effect of superabsorbent polymers on the mitigation of plastic shrinkage cracking of conventional concrete, results of an inter-laboratory test by RILEM TC 260-RSC (2020) (0)
- SuperAbsorbent polymers for smart and durable concrete structures (2020) (0)
- New findings on the contribution of Mg-Al-NO3 layered double hydroxides to the hydration and chloride binding capacity of cement pastes (2023) (0)
- Bacillus sphaericus LMG 22257 is physiologically suitable for self-healing concrete (2017) (0)
- XIV DBMC 14th International Conference on Durability of Building Materials and Components (2017) (0)
- Destructive and non-destructive techniques to investigate mechanical property changes of green beans due to minimal heat processing (2000) (0)
- Development and characterization of novel polymers for self-healing cementitious materials (2015) (0)
- Chemical treatment of natural fibres to obtain multiple cracking and self-healing in cementitious materials (2014) (0)
- Durability Performance of Hybrid Binder Concretes Containing Non-Ferrous Slag and Recycled Aggregates (2023) (0)
- Recycled concrete in agricultural constructions: acid attack (2015) (0)
- SHE: The Flemish program on engineerd self-healing materials (2013) (0)
- Influence of the curing period of encapsulated polyurethane precursor on the capillary water absorption of cracked mortar with selfhealing properties (2017) (0)
- The Influence of Ferronickel Slag as a Replacement of Quartz Sand upon Compressive and Flexural Strength of Reactive Powder Concrete (2022) (0)
- Characterization of supplementary cementitious materials by thermal analysis (2016) (0)
- TiO₂ coating on autoclaved aerated concrete both for self-cleaning and air-purifying purposes (2012) (0)
- Use of neutron radiography and tomography to visualize the autonomous crack sealing efficiency in cementitious materials (2012) (0)
- Towards an adequate deicing salt scaling resistance of high-volume fly ash (HVFA) concrete and concrete with superabsorbent polymers (SAPs) (2016) (0)
- Superabsorbent polymers to promote and stimulate autogenous healing in cementitious materials (2016) (0)
- Manual Application versus Autonomous Release of Water Repellent Agent to Prevent Reinforcement Corrosion in Cracked Concrete (2021) (0)
- How to Improve the Cradle-to-Gate Environmental and Economic Sustainability in Lime-Based Construction Materials? Answers from a Real-Life Case-Study (2023) (0)
- Effect of surface roughness on pressure distributions in the foot-to-ground contact area for cattle. (2002) (0)
- Microbial self-healing as two-step mechanism for corrosion inhibition in cracked concrete (2019) (0)
- Microstructural changes in porosity due to carbonation of fly ash blended pastes assessed by dynamic vapour sorption (2019) (0)
- Healing of dynamic concrete cracks using acrylate-endcapped polymer precursors (2016) (0)
- Reactivity of modified iron silicate slag as alternative SCM for Portland cement (2019) (0)
- Modelling of isothermal hydration heat of cement pastes with fly ash (2007) (0)
- Test methods to determine durability of concrete under combined environmental actions and mechanical load: final report of RILEM TC 246-TDC (2016) (0)
- Fine Recycled Concrete Aggregates Treated by Means of Wastewater and Carbonation Pretreatment (2023) (0)
- BIOGENIC SULPHURIC ACID CORROSION: A MICROSCOPIC INVESTIGATION (2002) (0)
- Autonomous healing by vascular networks: tracking of cracks interaction by Ultrasounds and Acoustic Emission (2023) (0)
- Mechanical and self-healing properties of cementitious materials with pH-responsive semi-synthetic superabsorbent polymers (2017) (0)
- Applying a biodeposition layer to increase the bond of a repair mortar on a mortar 1 substrate 2 3 (2017) (0)
- Polymer action on the alkali-silica reaction (2013) (0)
- Development and characterization of novel polymers for self-healing cementitious materials (2015) (0)
- Polymer action on alkali-silica reaction: further research (2012) (0)
- Titanium dioxide cementitious materials: characterization and air cleaning potential. (2007) (0)
- Concrete technology and chemical attack of floors in pig houses (1994) (0)
- Corrosion prevention in cracked concrete by denitrifying bacterial granules (2019) (0)
- Hydration degree of cement and slag in slag blended cement pastes (2011) (0)
- Smart silo structures (2005) (0)
- Ureolytic bacteria based self-healing concrete (2016) (0)
- Valorisation on municipal solid waste incineration residues in concrete products (2018) (0)
- Review and discussion of polymer action on alkali–silica reaction (2012) (0)
- LCA based recommendations for the selection of eco-concretes using blast furnace slag and fly ash (2023) (0)
- TiO2 based strategies to prevent algal fouling on cementitious materials (2012) (0)
- On-line monitoring of setting and hardening of concrete (2006) (0)
- Efficiency of manual and autonomous healing to mitigate chloride ingress in cracked concrete (2019) (0)
- Self-healing ability of cracks in alkali-activated slag systems incorporating superabsorbent polymers (2023) (0)
- Surface consolidation of natural stones by use of bio-agents and chemical consolidants (2017) (0)
- Biogenic sulphuric acid corrosion: a microscopic investigation. Concrete for extreme conditions. (2002) (0)
- Characteristics and durability of environment-conscious concrete with a high volume of fly ashes (2004) (0)
- Comparison of reactivity tests on pozzolanic materials (2018) (0)
- The use of solution and isothermal calorimetry for monitoring of high performance concrete hydration (2009) (0)
- Can superabsorbent polymers mitigate shrinkage in cementitious materials blended with supplementary cementitious materials (2016) (0)
- POLYMER ACTION ON ALKALI-AGGREGATE REACTION OF CEMENT MORTAR : REVIEW OF BASIC CONCEPTS AND PRESENTATION OF A RESEARCH PROGRAM (2010) (0)
- Use of superabsorbent polymers to mitigate autogenous shrinkage in ultra-high performance concrete (2019) (0)
- 4 Recovery against Mechanical Actions (2013) (0)
- Self-healing performance of cement mortar mixed with pulverized clinker and inorganic admixture (2023) (0)
- Evaluation of different TiO2 photocatalysis based strategies to avoid algal fouling on cement based materials (2011) (0)
- Methodology for including the age effect of concrete with SCMs in results from accelerated testing (2012) (0)
- New biocide-based method to prevent biogenic sulfuric acid corrosion of concrete. (2001) (0)
- Mitigating autogenous shrinkage by means of superabsorbent polymers : effect on concrete properties (2017) (0)
- Ultrasonic wave transmission to monitor the performance of self-healing concrete based on encapsulated polymer precursors (2015) (0)
- Freeze-thaw durability of recycled concrete from construction and demolition wastes (2017) (0)
- Experimental indication of imbibition during capillary water uptake in cementitious materials (2018) (0)
- Durability performance of recycled brick concrete in a simulated farm environment (2015) (0)
- The Effect on Using Cells versus Spores of Bacillus Sphaericus on the Healing Performance of Self-Healing Mortar (2023) (0)
- Cost-effective adaptation to address climate change impacts (2020) (0)
- Optimizing the mild heat treatment experiments on broccoli stems using numerical methods (1999) (0)
- Monitoring the Early-Age Shrinkage Cracking of Concrete with Superabsorbent Polymers by Means of Optical Fiber (SOFO) Sensors (2020) (0)
- Ultrasonic Monitoring of Shrinkage Development of HPC Under Isothermal Conditions (2010) (0)
- Aantasting van betonvloeren. Herstellen en beschermen kan op vele manieren gebeuren (Attack of concrete floors: several ways to repair and protect floors) (1995) (0)
- Recommendation of RILEM TC 238-SCM: determination of the degree of reaction of siliceous fly ash and slag in hydrated cement paste by the selective dissolution method (2018) (0)
- Resistance of concrete with blast-furnace slag against chlorides, investigated by comparing chloride profiles after migration and diffusion (2012) (0)
- RILEM TC-238 SCM recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages (2018) (0)
- Influencing factors to the capillary water uptake of (un)cracked cementitious materials (2023) (0)
- M&S Highlight: Hearn (1998), Self-sealing, autogenous healing and continued hydration—What is the difference? (2022) (0)
- Multiple self-repair of concrete cracks by encapsulated methyl methacrylate (2017) (0)
- Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test (2018) (0)
- From Waste to Structures: Mechanical and Durability Properties of Bottom Ash Concrete (2019) (0)
- Neutron radiography, a sensitive method to visualize autonomous healing of cracks in cementitious materials (2011) (0)
- Encapsulated Phase-Change Materials as additives in cementitious materials to promote thermal comfort in concrete constructions (2014) (0)
- Analysing dynamic neutron tomography of self-healing concrete using piecewise constant functions (2019) (0)
- Environmental and Economic Sustainability Aspects in Lime-Based Construction Materials (2023) (0)
- More durable concrete structures by autonomous repair of damage (2012) (0)
- Accelerated biogenic sulfur attack on PCC (2001) (0)
- Mechanical characteristics of the calcite precipitated in cracks of self-healing concrete studied by the indentation technique (2015) (0)
- Evolution of the surface roughness of concrete subjected to feed acids (1998) (0)
- Correction to: Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC (2021) (0)
- Concrete with supplementary cementitious materials (2016) (0)
- Capsules changing in brittleness due to leaching of plasticizing agents (2015) (0)
- Effect of plasticizer migration on thermal and mechanical properties of mPEG/PMMA blend for self-healing concrete application (2016) (0)
- Setting and hardening behaviour using ultrasound and compressive strength development of concrete with different replacement levels of cement by fly ash (2005) (0)
- Assessment of the performance of cottonised flax in natural fibre reinforced cementitious composites (2011) (0)
- Durability of building materials and components in farm buildings (2000) (0)
- Lessons learned from the EC MSCA ITN Project SMARTINCS: Smart, Multi-functional, Advanced Repair Technologies In Cementitious Systems (2023) (0)
- Estimated service life of carbonation exposed (cracked) concrete with pozzolans or self-healing agents (2018) (0)
- Relating ultrasonic velocity measurements on fresh concrete to CEMHYD3D microstructure simulations (2010) (0)
- Contact pressure measurement and finite element modelling of bovine claws on concrete floors. (2008) (0)
- The Effect of Mechanical Load on Carbonation of Concrete: Discussion on Test Methods and Results (2020) (0)
- On the quantitative thermogravimetric analysis of calcite content in hydrated cementitious systems (2017) (0)
- Preliminary Investigation on the effect of cement replacement by residues from the incineration of non-hazardous waste on strength and Alkali Silica reaction (2017) (0)
- Influence of Hydrated Lime on the Self-Healing Capacity of Cement Mortars (2023) (0)
- Fracture energy of coarse recycled aggregate concrete using the wedge splitting test method: influence of water-reducing admixtures (2016) (0)
- Influence of temperature on the effectiveness of a biogenic carbonate surface treatment for limestone conservation (2012) (0)
- Automated laboratory tests regarding the effect of polymer modification on the resistance of concrete to a lactic/acetic acid solution. Presented at the Fall 2001 ACI Convention 'Concrete of the Future', Dallas, 28 October - 2 November 2001. (2001) (0)
- Effect of superabsorbent polymers (SAP) on the freeze–thaw resistance of concrete: results of a RILEM interlaboratory study (2016) (0)
- Biopolymers as Novel Tool for Self-Sealing and Self-Healing of Mortar (2016) (0)
- Evaluation of the algaecide action of different TiO2 containing plasters. (2009) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Nele De Belie?
Nele De Belie is affiliated with the following schools:
