Peter Wriggers

Q: What Schools Are Affiliated With Peter Wriggers

Peter Wriggers is affiliated with the following schools: Hamburg University of Technology, University of Stuttgart, Leibniz University Hannover

Peter Wriggers's AcademicInfluence.com Rankings

Peter Wriggers

Engineering

#1877

World Rank

#2672

Historical Rank

Mechanical Engineering

#74

World Rank

#95

Historical Rank

Applied Physics

#183

World Rank

#192

Historical Rank

engineering Degrees

Peter Wriggers

Physics

#2558

World Rank

#3759

Historical Rank

physics Degrees

Download Badge

Engineering
Physics

Peter Wriggers's Degrees

PhD Mechanical Engineering University of Stuttgart

Why Is Peter Wriggers Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Peter Wriggers's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Computational Contact Mechanics (2002) (1945)
Nonlinear Finite Element Methods (2008) (1086)
Mesoscale models for concrete: homogenisation and damage behaviour (2006) (584)
An Introduction to Computational Micromechanics (2004) (572)
Computational contact mechanics (2012) (453)
A perturbed Lagrangian formulation for the finite element solution of contact problems (1985) (441)
FINITE ELEMENT FORMULATION OF LARGE DEFORMATION IMPACT-CONTACT PROBLEMS WITH FRICTION (1990) (401)
Nonlinear finite element analysis of solids and structures (1998) (354)
Finite element algorithms for contact problems (1995) (334)
Nichtlineare Finite-Element-Methoden (2001) (298)
Contact treatment in isogeometric analysis with NURBS (2011) (283)
A general procedure for the direct computation of turning and bifurcation points (1990) (273)
A large deformation frictional contact formulation using NURBS‐based isogeometric analysis (2011) (249)
A note on tangent stiffness for fully nonlinear contact problems (1985) (204)
Frictionless 2D Contact formulations for finite deformations based on the mortar method (2005) (203)
Introduction to Contact Mechanics (2006) (197)
A virtual element method for contact (2016) (192)
Consistent linearization for path following methods in nonlinear FE analysis (1986) (190)
Three-dimensional mortar-based frictional contact treatment in isogeometric analysis with NURBS (2012) (175)
A note on enhanced strain methods for large deformations (1996) (174)
A new locking-free brick element technique for large deformation problems in elasticity ☆ (2000) (174)
A simple method for the calculation of postcritical branches (1988) (173)
Automation of Finite Element Methods (2016) (163)
A stabilization technique to avoid hourglassing in finite elasticity (2000) (161)
A quadratically convergent procedure for the calculation of stability points in finite element analysis (1988) (155)
A mortar formulation for 3D large deformation contact using NURBS-based isogeometric analysis and the augmented Lagrangian method (2012) (153)
Arbitrary Lagrangian Eulerian finite element analysis of free surface flow (2000) (152)
Mortar based frictional contact formulation for higher order interpolations using the moving friction cone (2006) (150)
A two-scale model of granular materials (2012) (140)
Isogeometric contact: a review (2014) (137)
An interior‐point algorithm for elastoplasticity (2007) (133)
Numerical homogenization of hardened cement paste (2008) (131)
Finite deformation post‐buckling analysis involving inelasticity and contact constraints (1986) (131)
Real contact mechanisms and finite element formulation—a coupled thermomechanical approach (1992) (130)
A contact detection algorithm for superellipsoids based on the common-normal concept (2008) (130)
On contact between three-dimensional beams undergoing large deflections (1997) (129)
Large strain analysis of soft biological membranes: Formulation and finite element analysis (1996) (129)
Smooth C1‐interpolations for two‐dimensional frictional contact problems (2001) (129)
Finite element analysis of pile installation using large-slip frictional contact (2005) (128)
A mortar-based frictional contact formulation for large deformations using Lagrange multipliers (2009) (127)
Isogeometric large deformation frictionless contact using T-splines (2014) (123)
Contact constraints within coupled thermomechanical analysis—A finite element model (1994) (121)
Contact with friction between beams in 3‐D space (2000) (107)
Efficient virtual element formulations for compressible and incompressible finite deformations (2017) (105)
A triangular finite shell element based on a fully nonlinear shell formulation (2003) (99)
A formulation for frictionless contact problems using a weak form introduced by Nitsche (2007) (99)
Application of augmented Lagrangian techniques for non‐linear constitutive laws in contact interfaces (1993) (98)
Multi-scale Approach for Frictional Contact of Elastomers on Rough Rigid Surfaces (2009) (98)
A segment-to-segment contact strategy (1998) (98)
Homogenization in finite thermoelasticity (2011) (97)
On the Computation of the Macroscopic Tangent for Multiscale Volumetric Homogenization Problems (2008) (96)
3D corrected XFEM approach and extension to finite deformation theory (2011) (96)
Finite element concepts for finite elastoplastic strains and isotropic stress response in shells: theoretical and computational analysis (1999) (94)
A two-level iteration method for solution of contact problems (1986) (94)
Finite element modelling of orthotropic material behaviour in pneumatic membranes (2001) (94)
NURBS- and T-spline-based isogeometric cohesive zone modeling of interface debonding (2014) (94)
Aspects of the computational testing of the mechanical properties of microheterogeneous material samples (2001) (93)
Thin shells with finite rotations formulated in biot stresses : theory and finite element formulation (1993) (90)
A modified Gurson-type plasticity model at finite strains: formulation, numerical analysis and phase-field coupling (2018) (90)
On augmented Lagrangian algorithms for thermomechanical contact problems with friction (1995) (89)
Theory and numerics of thin elastic shells with finite rotations (1989) (89)
Phase-field modeling of brittle fracture using an efficient virtual element scheme (2018) (87)
A C1-continuous formulation for 3D finite deformation frictional contact (2002) (86)
Consistent gradient formulation for a stable enhanced strain method for large deformations (1996) (84)
Variational phase-field formulation of non-linear ductile fracture (2018) (84)
On the coupled thermomechanical treatment of necking problems via finite element methods (1992) (82)
Polygonal finite element methods for contact-impact problems on non-conformal meshes (2014) (76)
An adaptive method for homogenization in orthotropic nonlinear elasticity (2007) (76)
Analysis and Simulation of Contact Problems (2006) (76)
A machine learning based plasticity model using proper orthogonal decomposition (2020) (75)
A DEM-FEM Coupling Approach for the Direct Numerical Simulation of 3D Particulate Flows (2012) (75)
Approximation of incompressible large deformation elastic problems: some unresolved issues (2013) (74)
Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale (2009) (74)
On enhanced strain methods for small and finite deformations of solids (1996) (74)
A comparison of three-dimensional continuum and shell elements for finite plasticity (1996) (73)
Homogenization of granular material modeled by a three-dimensional discrete element method (2008) (73)
A method for solving contact problems (1998) (72)
Computational homogenization of micro-structural damage due to frost in hardened cement paste (2008) (72)
An improved EAS brick element for finite deformation (2010) (72)
Frictional contact between 3D beams (2002) (70)
Computational micro-macro material testing (2001) (69)
Introduction to Computational Micromechanics (Lecture Notes in Applied and Computational Mechanics) (2004) (69)
An exact conserving algorithm for nonlinear dynamics with rotational DOFs and general hyperelasticity. Part 2: shells (2011) (67)
A nonlocal cohesive zone model for finite thickness interfaces – Part I: Mathematical formulation and validation with molecular dynamics (2011) (66)
A new Mixed Finite Element based on Different Approximations of the Minors of Deformation Tensors (2011) (66)
A domain decomposition method for bodies with heterogeneous microstructure basedon material regularization (1999) (66)
Stiffness and strength of hierarchical polycrystalline materials with imperfect interfaces (2012) (65)
A note on the optimum choice for penalty parameters (1987) (64)
A new axisymmetrical membrane element for anisotropic, finite strain analysis of arteries (1996) (63)
The Neural Particle Method - An Updated Lagrangian Physics Informed Neural Network for Computational Fluid Dynamics (2020) (62)
Nonlinear Dynamics of Shells: Theory, Finite Element Formulation, and Integration Schemes (1997) (61)
An adaptive multiscale method for crack propagation and crack coalescence (2013) (61)
A nonlocal cohesive zone model for finite thickness interfaces – Part II: FE implementation and application to polycrystalline materials (2011) (61)
Adaptive Finite Elements for Elastic Bodies in Contact (1999) (60)
A computational study of interfacial debonding damage in fibrous composite materials (1998) (59)
An adaptive global–local approach for phase-field modeling of anisotropic brittle fracture (2019) (59)
Phase-field modeling of porous-ductile fracture in non-linear thermo-elasto-plastic solids (2020) (58)
A numerical model for thermomechanical contact based on microscopic interface laws (1992) (58)
A multiscale contact homogenization technique for the modeling of third bodies in the contact interface (2008) (58)
A fully nonlinear multi-parameter shell model with thickness variation and a triangular shell finite element (2004) (57)
A method of substructuring large-scale computational micromechanical problems (2001) (57)
IMPROVED ENHANCED STRAIN FOUR-NODE ELEMENT WITH TAYLOR EXPANSION OF THE SHAPE FUNCTIONS (1997) (57)
Contact between 3D beams with rectangular cross‐sections (2002) (56)
An adaptive multiscale resolution strategy for the finite deformation analysis of microheterogeneous structures (2011) (56)
A material model for rubber-like polymers exhibiting plastic deformation: computational aspects and a comparison with experimental results (1997) (56)
Computational thermal homogenization of concrete (2013) (55)
A master-surface to master-surface formulation for beam to beam contact. Part I: frictionless interaction (2016) (54)
Error estimation for crack simulations using the XFEM (2012) (54)
Response of a nonlinear elastic general Cosserat brick element in simulations typically exhibiting locking and hourglassing (2005) (53)
A Virtual Element Method for 2D linear elastic fracture analysis (2018) (53)
A note on finite‐element implementation of pressure boundary loading (1991) (52)
Multi-scale study of high-strength low-thermal-conductivity cement composites containing cenospheres (2017) (52)
Multiscale diffusion–thermal–mechanical cohesive zone model for concrete (2015) (51)
Non-linear finite element analysis of solids and structures, volume 1: Essentials, M. A. Crisfield, John Wiley. ISBN: 0-471-92956-5 (1994) (49)
A new algorithm for numerical solution of 3D elastoplastic contact problems with orthotropic friction law (2004) (49)
A finite element method for stability problems in finite elasticity (1995) (48)
3D multiscale crack propagation using the XFEM applied to a gas turbine blade (2014) (48)
A low order 3D virtual element formulation for finite elasto–plastic deformations (2017) (48)
Numerical derivation of contact mechanics interface laws using a finite element approach for large 3D deformation (2004) (47)
A global-local approach for hydraulic phase-field fracture in poroelastic media (2020) (46)
An exact conserving algorithm for nonlinear dynamics with rotational DOFs and general hyperelasticity. Part 1: Rods (2008) (45)
A low order 3D virtual element formulation for finite elasto–plastic deformations (2018) (45)
Different a posteriori error estimators and indicators for contact problems (1998) (45)
VIRTUAL ELEMENT FORMULATION FOR PHASE-FIELD MODELING OF DUCTILE FRACTURE (2019) (45)
A finite element method for contact using a third medium (2013) (45)
Self-contact modeling on beams experiencing loop formation (2015) (44)
New developments in contact problems (1999) (44)
Dynamic flexoelectric effect on piezoelectric nanostructures (2018) (43)
A novel mixed finite element for finite anisotropic elasticity; the SKA-element Simplified Kinematics for Anisotropy (2016) (43)
Nonlinear Computational Mechanics: State of the Art (1991) (43)
An efficient 3D enhanced strain element with Taylor expansion of the shape functions (1996) (42)
A model for simulating the deterioration of structural-scale material responses of microheterogeneous solids (2001) (42)
Random homogenization analysis in linear elasticity based on analytical bounds and estimates (2011) (42)
A superlinear convergent augmented Lagrangian procedure for contact problems (1999) (42)
Stochastic multiscale homogenization analysis of heterogeneous materials under finite deformations with full uncertainty in the microstructure (2015) (41)
A description of macroscopic damage through microstructural relaxation (1998) (41)
Algorithms for non-linear contact constraints with application to stability problems of rods and shells (1987) (41)
Thermomechanical contact—a rigorous but simple numerical approach (1993) (41)
A fully non‐linear axisymmetrical membrane element for rubber‐like materials (1990) (41)
Improved numerical algorithms for frictional contact in pile penetration analysis (2006) (40)
A nonlinear composite shell element with continuous interlaminar shear stresses (1993) (40)
Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation (2015) (40)
A finite deformation brick element with inhomogeneous mode enhancement (2009) (39)
An XFEM approach for modelling delamination in composite laminates (2016) (38)
Computational homogenization of rubber friction on rough rigid surfaces (2013) (38)
Comparison of the macroscopic behavior of granular materials modeled by different constitutive equations on the microscale (2008) (38)
An energy–momentum integration scheme and enhanced strain finite elements for the non-linear dynamics of shells (2002) (37)
Multiscale hydro-thermo-chemo-mechanical coupling: Application to alkali–silica reaction (2014) (37)
Development of a wrinkling algorithm for orthotropic membrane materials (2005) (37)
A finite element model for contact analysis of multiple Cosserat bodies (2005) (37)
A computational framework for brittle crack-propagation based on efficient virtual element method (2019) (36)
A nonlinear quadrilateral shell element with drilling degrees of freedom (1992) (36)
A general phase-field model for fatigue failure in brittle and ductile solids (2021) (35)
Application of Frictional Contact in Geotechnical Engineering (2007) (35)
Multiscale FEM approach for hysteresis friction of rubber on rough surfaces (2015) (35)
Application of Frictional Contact in Geotechnical Engineering (2007) (35)
Generating virtual process maps of SLM using powder-scale SPH simulations (2020) (34)
On the adaptive finite element method of steady-state rolling contact for hyperelasticity in finite deformations (2002) (34)
On the design of energy–momentum integration schemes for arbitrary continuum formulations. Applications to classical and chaotic motion of shells (2004) (34)
Processing and coating of open-pored absorbable magnesium-based bone implants. (2019) (33)
Thermo-mechanical behaviour of rubber materials during vulcanization (2005) (33)
Adaptive finite element techniques for frictional contact problems involving large elastic strains (1998) (33)
Comparative crash simulations incorporating the results of sheet forming analyses (2001) (33)
Finite element methods for contact problems with friction (1996) (32)
Metal particle fusion analysis for additive manufacturing using the stabilized optimal transportation meshfree method (2018) (32)
Thermal contact conductance characterization via computational contact homogenization: A finite deformation theory framework (2010) (31)
Investigation of heat source modeling for selective laser melting (2018) (31)
Isogeometric symmetric Galerkin boundary element method for three-dimensional elasticity problems (2017) (30)
On the treatment of nonlinear unilateral contact problems (1993) (29)
A FORMULATION OF THE QS6 ELEMENT FOR LARGE ELASTIC DEFORMATIONS (1996) (28)
Finite element formulations for large strain anisotropic material with inextensible fibers (2016) (28)
A new finite element based on the theory of a Cosserat point—extension to initially distorted elements for 2D plane strain (2007) (28)
Contact between rolling beams and flat surfaces (2014) (28)
Model-data-driven constitutive responses: application to a multiscale computational framework (2021) (28)
A formulation for the 4‐node quadrilateral element (1995) (28)
A chemo-mechano-biological formulation for the effects of biochemical alterations on arterial mechanics: the role of molecular transport and multiscale tissue remodelling (2017) (28)
A Selection of Benchmark Problems in Solid Mechanics and Applied Mathematics (2020) (28)
Degradation behaviour of LAE442-based plate-screw-systems in an in vitro bone model. (2015) (28)
Stabilization algorithm for the optimal transportation meshfree approximation scheme (2018) (27)
2D contact smooth formulation based on the mortar method (2012) (27)
Virtual elements for finite thermo-plasticity problems (2019) (27)
Stability of rods with unilateral constraints, a finite element solution (1984) (27)
Efficient integration of crack singularities in the extended finite element method: Duffy-distance transformation and conformal preconditioning strategy (2018) (27)
Finite strain response of crimped fibers under uniaxial traction: An analytical approach applied to collagen (2017) (27)
Numerical multiscale modelling and experimental validation of low speed rubber friction on rough road surfaces including hysteretic and adhesive effects (2017) (26)
A fatigue damage accumulation model for reliability analysis of engine components under combined cycle loadings (2020) (26)
Intelligent support of engineering analysis using ontology and case-based reasoning (2007) (26)
On Consistent Tangent Matrices for Frictional Contact Problems (1987) (25)
Calculation of impact-contact problems of thin elastic shells taking into account geometrical nonlinearities within the contact region (1982) (25)
An h-adaptive method for elasto-plastic shell problems (2000) (25)
Consistent coupling of beam and shell models for thermo‐elastic analysis (2004) (25)
Adaptive techniques for the contact of elastic bodies. (1994) (25)
Methods to project plasticity models onto the contact surface applied to soil structure interactions (2015) (25)
A simple formulation for two‐dimensional contact problems using a moving friction cone (2003) (25)
Serendipity virtual element formulation for nonlinear elasticity (2019) (25)
Random homogenization analysis for heterogeneous materials with full randomness and correlation in microstructure based on finite element method and Monte-carlo method (2014) (25)
A PARALLEL ALGEBRAIC MULTIGRID SOLVER FOR PROBLEMS IN SOLID MECHANICS DISCRETISIZED BY FINITE ELEMENTS (1998) (24)
Homogenisation of Microheterogeneous Materials Considering Interfacial Delamination at Finite Strains (2003) (24)
Computational homogenization of polycrystalline materials with the Virtual Element Method (2019) (24)
An ALE method for penetration into sand utilizing optimization-based mesh motion (2015) (24)
Efficient modeling of filled rubber assuming stress-induced microscopic restructurization (2020) (24)
Advection approaches for single- and multi-material arbitrary Lagrangian–Eulerian finite element procedures (2006) (23)
Continuum Mechanics, Nonlinear Finite Element Techniques and Computational Stability (1993) (23)
Trends in computational contact mechanics (2011) (23)
Bayesian inversion for unified ductile phase-field fracture (2021) (23)
Nonlinear stability-analysis of shell and contact-problems including branch-switching (1990) (23)
elements for fracture mechanics (2016) (23)
Stochastic homogenized effective properties of three-dimensional composite material with full randomness and correlation in the microstructure (2014) (22)
A simulation model for the degradation of magnesium-based bone implants. (2019) (22)
Crack face contact for a hexahedral-based XFEM formulation (2012) (22)
Feed-Forward Neural Networks for Failure Mechanics Problems (2021) (22)
Efficient Low Order Virtual Elements for Anisotropic Materials at Finite Strains (2018) (22)
3D ductile crack propagation within a polycrystalline microstructure using XFEM (2018) (22)
Asymptotic upper bounds for the errors of Richardson extrapolation with practical application in approximate computations (2009) (22)
Virtual element formulation for isotropic damage (2018) (21)
Reliability-based optimization of trusses with random parameters under dynamic loads (2011) (21)
Adaptive methods for thermomechanical coupled contact problems (2004) (21)
On the optimality of the window method in computational homogenization (2013) (21)
Sensitivity analysis for the mechanics of tendons and ligaments: Investigation on the effects of collagen structural properties via a multiscale modeling approach (2019) (21)
A multi-scale computational method including contact for the analysis of damage in composite materials (2014) (21)
Error controlled adaptive multiscale XFEM simulation of cracks (2012) (21)
The analyses of dynamic response and reliability of fuzzy-random truss under stationary stochastic excitation (2010) (21)
A numerical investigation of the interplay between cohesive cracking and plasticity in polycrystalline materials (2013) (20)
A contact layer element for large deformations (2015) (20)
Curvilinear virtual elements for contact mechanics (2020) (20)
Material instabilities of an incompressible elastic cube under triaxial tension (1997) (20)
New trends in thin structures : formulation, optimization and coupled problems (2010) (20)
Numerical modeling of electrical contacts (2010) (19)
A strategy for numerical testing of frictional laws with application to contact between soil and concrete (2000) (19)
Node-to-segment and node-to-surface interface finite elements for fracture mechanics (2016) (19)
Peridynamic Petrov–Galerkin method: A generalization of the peridynamic theory of correspondence materials (2020) (19)
Structural dynamic optimal design based on dynamic reliability (2011) (18)
Inelastic analysis of granular interfaces via computational contact homogenization (2010) (18)
An advanced abrasion model for tire wear (2018) (18)
A cover‐based contact detection approach for irregular convex polygons in discontinuous deformation analysis (2020) (17)
Study on Contact Characteristic of Nanoscale Asperities by Using Molecular Dynamics Simulations (2009) (17)
Computing pointwise contact between bodies: a class of formulations based on master–master approach (2019) (17)
Adaptive methods for frictionless contact problems (2001) (17)
Computational Contact Mechanics with the Finite Element Method (2017) (17)
An adaptive finite element algorithm for contact problems in plasticity (1995) (16)
Multilevel Global-Local techniques for adaptive ductile phase-field fracture (2021) (16)
Finite Element Postbuckling Analyis of Shells with Nonlinear Contact Constraints (1986) (16)
Delamination growth in composite laminates of variable stiffness (2016) (16)
A fully non‐linear axisymmetrical quasi‐kirchhoff‐type shell element for rubber‐like materials (1993) (16)
Mixed Finite Element Technologies (2009) (16)
A CONTACT* (2022) (16)
A 3D beam‐to‐beam contact finite element for coupled electric–mechanical fields (2005) (15)
On the symmetric boundary element method and the symmetric coupling of boundary elements and finite elements (1997) (15)
Effective behaviour of elastic heterogeneous thin structures at finite deformations (2007) (15)
An adaptive model order reduction with Quasi‐Newton method for nonlinear dynamical problems (2016) (15)
Mixed Finite Element Methods - Theory and Discretization (2009) (15)
Numerical simulation and experimental validation of biofilm in a multi-physics framework using an SPH based method (2016) (15)
Reduction Methods for FE Analysis in Nonlinear Structural Dynamics (2005) (15)
Molecular-level collagen damage explains softening and failure of arterial tissues: A quantitative interpretation of CHP data with a novel elasto-damage model. (2019) (15)
On the stability analysis of hyperelastic boundary value problems using three- and two-field mixed finite element formulations (2017) (15)
Finite and Virtual Element Formulations for Large Strain Anisotropic Material with Inextensive Fibers (2018) (15)
Porous-ductile fracture in thermo-elasto-plastic solids with contact applications (2020) (15)
On practical integration of semi-discretized nonlinear equations of motion. Part 1: reasons for probable instability and improper convergence (2005) (14)
Finite element modeling of orthotropic material behaviour in pneumatic membranes (2000) (14)
3D Dynamic Crack Propagation by the Extended Finite Element Method and a Gradient-Enhanced Damage Model (2018) (14)
Micro-Meso-Macro Modelling of Composite Materials (2006) (14)
Frictional contact of elastomer materials on rough rigid surfaces (2004) (14)
Intelligent support of the preprocessing stage of engineering analysis using case-based reasoning (2008) (14)
Consistent formulation for thermomechanical contact based on microscopic interface laws (1992) (14)
A combined adaptive phase field and discrete cutting method for the prediction of crack paths (2020) (14)
Comparison of degradation behaviour and osseointegration of the two magnesium scaffolds, LAE442 and La2, in vivo (2019) (13)
A virtual element formulation for general element shapes (2020) (13)
An axisymmetrical quasi-Kirchhoff-type shell element for large plastic deformations (1995) (13)
Mesoscale constitutive modeling of non-crystallizing filled elastomers (2016) (13)
Computational and theoretical aspects of a grain-boundary model at finite deformations (2016) (13)
Contact Modeling for Solids and Particles (2018) (13)
Experimental studies on the disappearance of subretinal fluid after episcleral buckling procedures without drainage (2005) (13)
Finite element calculation of the stability behaviour of hyperelastic solids with the enhanced strain method (1996) (13)
On the computational aspects of comminution in discrete element method (2018) (13)
Elastomere Friction: Theory, Experiment and Simulation (2011) (13)
Magnesium Alloys for Open-Pored Bioresorbable Implants (2020) (13)
Self–Actuating SMA–HPFRC Fuses for Auto–Adaptive Composite Structures (2003) (13)
Modelling of serrated chip formation processes using the stabilized optimal transportation meshfree method (2019) (12)
On the stabilization of the rectangular 4‐node quadrilateral element (1994) (12)
On the incompressible constraint of the 4‐node quadrilateral element (1995) (12)
Mechanics of Materials – Formulas and Problems (2017) (12)
Homogenization and Multi-Scale Approaches for Contact Problems (2007) (12)
Chemo-mechanical modelling of swelling and crosslinking reaction kinetics in alginate hydrogels: A novel theory and its numerical implementation (2021) (12)
A finite element approach to the chaotic motion of geometrically exact rods undergoing in-plane deformations (1996) (12)
Numerical simulation of fluid‐structure interaction problems by a coupled SPH‐FEM approach (2016) (12)
Isogeometric frictionless contact analysis with the third medium method (2018) (12)
Direct and inverse identification of constitutive parameters from the structure of soft tissues. Part 1: micro- and nanostructure of collagen fibers (2018) (12)
Homogenization of Granular Material Modeled by a 3D DEM (2011) (12)
On Smooth Finite Element Discretizations for Frictional Contact Problems (2000) (12)
Free surface tension in incompressible smoothed particle hydrodynamcis (ISPH) (2020) (12)
A finite element method for plane stress problems with large elastic and plastic deformations (1997) (11)
Experimental and numerical characterization of expanded glass granules (2018) (11)
Practical Integration of Semidiscretized Nonlinear Equations of Motion: Proper Convergence for Systems with Piecewise Linear Behavior (2013) (11)
Direct computation of instability points for contact problems (2003) (11)
Contact between spheres and general surfaces (2018) (11)
Experimental characterization and computational modeling of hydrogel cross-linking for bioprinting applications (2019) (11)
3D mixed virtual element formulation for dynamic elasto-plastic analysis (2021) (11)
Nonlinear discontinuous Petrov–Galerkin methods (2017) (11)
Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I (2014) (11)
On the Treatment of Contact Contraints within Coupled Thermomechanical Analysis (1992) (11)
An extension of assumed stress finite elements to a general hyperelastic framework (2019) (11)
THE MOVING FRICTION CONE APPROACH FOR THREE-DIMENSIONAL CONTACT SIMULATIONS (2004) (11)
A novel stress-induced anisotropic growth model driven by nutrient diffusion: Theory, FEM implementation and applications in bio-mechanical problems (2020) (11)
Fiber-reinforced materials: finite elements for the treatment of the inextensibility constraint (2017) (11)
Adaptive finite element analysis of fractal interfaces in contact problems (2000) (10)
A Virtual Element Method for Crack Propagation (2018) (10)
Intelligent Decision Support System for River Floodplain Management (2014) (10)
An adaptive model order reduction by proper snapshot selection for nonlinear dynamical problems (2016) (10)
Mixed peridynamic formulations for compressible and incompressible finite deformations (2020) (10)
Discrete element model for general polyhedra (2021) (10)
Aerodynamical and Structural Analysis of Operationally Used Turbine Blades (2017) (10)
Virtual Element Formulation For Finite Strain Elastodynamics (2020) (10)
Computation of Effective Cement Paste Diffusivities from Microtomographic Images (2008) (10)
A matrix-free isogeometric Galerkin method for Karhunen-Loève approximation of random fields using tensor product splines, tensor contraction and interpolation based quadrature (2020) (10)
Constant‐free explicit error estimator with sharp upper error bound property for adaptive FE analysis in elasticity and fracture (2015) (10)
A Review on Cementitious Self-Healing and the Potential of Phase-Field Methods for Modeling Crack-Closing and Fracture Recovery (2020) (9)
PLANETARY ROVER LOCOMOTION ON SOFT GRANULAR SOILS – EFFICIENT ADAPTION OF THE ROLLING BEHAVIOUR OF NONSPHERICAL GRAINS FOR DISCRETE ELEMENT SIMULATIONS (2013) (9)
Master-master frictional contact and applications for beam-shell interaction (2020) (9)
Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants (2017) (9)
A finite element post-processed Galerkin method for dimensional reduction in the non-linear dynamics of solids. Applications to shells (2003) (9)
Modeling of Fracture in Polycrystalline Materials (2016) (9)
Finite element analysis of enlarged end piles using frictional contact (2008) (9)
Modeling of two-body abrasive wear of filled elastomers as a contact-induced fracture process (2019) (9)
On the sensitivity of homogenized material responses at infinitesimal and finite strains (2000) (9)
Multiscale Modeling of Heterogeneous Structures (2018) (9)
Comparison of two pore sizes of LAE442 scaffolds and their effect on degradation and osseointegration behavior in the rabbit model. (2020) (9)
IMPROVING ACCURACY IN PARTICLE METHODS USING NULL SPACES AND FILTERS (2015) (9)
SHAPE OPTIMIZATION OF A LUBRICATED JOURNAL BEARING WITH REGARD TO THE DISTRIBUTION OF PRESSURE IN THE FLUID (1997) (9)
Direct and inverse identification of constitutive parameters from the structure of soft tissues. Part 2: dispersed arrangement of collagen fibers (2019) (9)
Numerical method for solution of pointwise contact between surfaces (2020) (9)
Interaction between different internal length scales for strain localisation analysis of single phase materials (2003) (8)
A series of Duffy‐distance transformation for integrating 2D and 3D vertex singularities (2019) (8)
IUTAM Symposium on Computational Methods in Contact Mechanics (2007) (8)
On a Mass Conservation Criterion in Micro-to-Macro Transitions (2008) (8)
A micromechanically motivated higher‐order continuum formulation of linear thermal conduction (2010) (8)
An algebraic multigrid solver for finite element computations in solid mechanics (1997) (8)
Lecture Notes in Applied and Computational Mechanics Volume 74 (2014) (8)
A technique to describe the macroscopic pressure dependence of diffusive properties of solid materials containing heterogeneities (1999) (8)
Experimental and numerical investigation of granular materials for an increase of the collision safety of double‐hull vessels (2016) (8)
A virtual element method for frictional contact including large deformations (2019) (8)
On the effects of microstress on macroscopic diffusion processes (1999) (7)
Discretization, Large Deformation Contact (2006) (7)
MULTIPHASE DEBRIS FLOW SIMULATIONS WITH THE DISCRETE ELEMENT METHOD COUPLED WITH A LATTICE-BOLTZMANN FLUID (2013) (7)
Electro-magneto-mechanically response of polycrystalline materials: Computational Homogenization via the Virtual Element Method (2020) (7)
Elasto-plastic contact problems solved by the cross-constraints method (1995) (7)
AN ADAPTIVE FINITE ELEMENT TECHNIQUE FOR NONLINEAR CONTACT PROBLEMS (1995) (7)
Finite element solution for static and dynamic interactions of cylindrical rigid objects and unsaturated granular soils (2021) (7)
Delamination onset and growth in composite shells (2018) (7)
Coupling Microscale Transport and Tissue Mechanics: Modeling Strategies for Arterial Multiphysics (2017) (7)
Red blood cell simulation using a coupled shell–fluid analysis purely based on the SPH method (2018) (7)
Modelling of Soil Structure Interaction by Applying a Hypoplastic Material Behaviour Within Mortar Contact Formulation (2015) (7)
Simulation-Aided Process Chain Design for the Manufacturing of Hybrid Shafts (2019) (7)
Micro–macro constitutive modeling and finite element analytical-based formulations for fibrous materials: A multiscale structural approach for crimped fibers (2019) (7)
The dynamic analysis of stochastic thin-walled structures under thermal–structural–acoustic coupling (2020) (7)
A macro-element for incompressible finite deformations based on a volume averaged deformation gradient (2008) (7)
A computational homogenization framework for soft elastohydrodynamic lubrication (2012) (7)
Bayesian Inversion with Open-Source Codes for Various One-Dimensional Model Problems in Computational Mechanics (2022) (7)
Numerical integration of viscoplastic material laws at large strains with application to impact problems (1992) (6)
Finite‐element transient calculation of a bell struck by a clapper (2006) (6)
Modelling, Simulation and Software Concepts for Scientific-Technological Problems (2011) (6)
Combination of the critical displacement method with a damage model for structural instability analysis (2001) (6)
Influence of coatings on degradation and osseointegration of open porous Mg scaffolds in vivo (2020) (6)
On the error indication of shells in unilateral frictionless contact (2002) (6)
An adaptive finite element method for frictionless contact problems (1995) (6)
Solution Methods for Time Independent Problems (2008) (6)
Finite Element Study of Degradable Intramedullary Nails out of Magnesium Alloy for Ovine Tibiae (2013) (6)
An Explicit Multi‐Body Contact Algorithm (2003) (6)
Multiscale finite element analysis of uncertain-but-bounded heterogeneous materials at finite deformation (2018) (6)
Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scale (2019) (6)
Modeling and simulation of the decohesion of particulate aggregates in a binding matrix (2001) (6)
COMPUTER ALGEBRA AND AUTOMATIC DIFFERENTIATION IN DERIVATION OF FINITE ELEMENT CODE (1999) (6)
Influence of water-induced damage mechanisms on the fatigue deterioration of high-strength concrete (6)
Advanced Finite Element Technologies (2016) (6)
AN EFFICIENT ALGORITHM FOR THE COMPUTATION OF STABILITY POINTS OF DYNAMICAL SYSTEMS UNDER STEP LOAD (1992) (6)
Automation of the Finite Element Method by J. Korelc (2008) (6)
DEM‐FEM coupled numerical investigation of granular materials to increase crashworthiness of double‐hull vessels (2016) (6)
Contact between rigid convex NURBS particles based on computer graphics concepts (2021) (6)
Computational model of damage-induced growth in soft biological tissues considering the mechanobiology of healing (2021) (6)
Investigation of degraded bone substitutes made of magnesium alloy using scanning electron microscope and nanoindentation. (2020) (6)
Bulk material models in Cohesive Zone Elements for simulation of joining zones (2019) (6)
Numerical simulation of rapid crack propagation in viscoplastic materials (1996) (6)
A consistent peridynamic formulation for arbitrary particle distributions (2021) (6)
Material Model Identification for DC04 Based on the Numerical Modelling of the Polycrystalline Microstructure and Experimental Data (2012) (5)
A curing model for the numerical simulation within additive manufacturing of soft polymers using peridynamics (2020) (5)
Integration of a case-based reasoning and an ontological knowledge base in the system of intelligent support of finite element analysis (2007) (5)
Comparison of discontinuous damage models of Mullins-type (2021) (5)
Solution Strategies for Nonlinear Equations and Computation of Singular Points (1995) (5)
A two-dimensional C1-continuous contact element based on the moving friction cone description (2002) (5)
Flexible polyhedra modeled by the virtual element method in a discrete element context (2021) (5)
ANALYSIS OF BELL VIBRATIONS (5)
NURBS-based geometries: A mapping approach for virtual serendipity elements (2021) (5)
Three‐dimensional modelling of discrete particles by superellipsoids (2006) (5)
Texture development and formability prediction for pre-textured cold rolled body-centred cubic steel (2013) (5)
TIME INTEGRATION ERRORS AND ENERGY CONSERVATION PROPERTIES OF THE STORMER VERLET METHOD APPLIED TO MPM (2019) (5)
Adaptive Methods for Contact Problems (2005) (5)
The analyses of dynamic response and reliability for failure-dependent stochastic micro-resonator with thermoelastic coupling effects (2020) (5)
Thermoelastic stability of trusses with temperature-dependent constitutive relations (1992) (5)
Water‐induced failure mechanics for concrete (2019) (5)
Multiscale hierarchical mechanics in soft tissues (2015) (4)
A Computational Model for Interfacial Damage Through Microstructural Cohesive Zone Relaxation (2000) (4)
A General Concept for Thermomechanical Coupling (1988) (4)
Meshless analysis of shear deformable shells: boundary and interface constraints (2016) (4)
Constitutive Equations for Contact Interfaces (2006) (4)
Computational testing of microheterogeneous materials (2001) (4)
Phenomenological modeling and numerical simulation of the environmental degradation of multiphase engineering materials (2000) (4)
Brick Elements for Finite Deformations Based on Macro-concepts and on Inhomogeneous Mode Enhancement (2009) (4)
A 3D contact investigation of rough surfaces considering elastoplasticity (2008) (4)
THERMO-VISCOELASTIC MATERIAL BEHAVIOUR AT FINITE DEFORMATIONS WITH TEMPERATURE-DEPENDENT MATERIAL PARAMETERS (1998) (4)
A simple local a posteriori bending indicator for axisymmetric membrane and bending shell elements (1998) (4)
Fe2-homogenization of micromorphic elasto-plastic materials (2013) (4)
Aspects of computational homogenisation of microheterogeneous materials including decohesion at finite strains (2005) (4)
Finite Elements for Thermomechanical Contact and Adaptive Finite Elemnt Analysis of Contact Problems (1999) (4)
Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation (2011) (4)
A Taylor–Hood type virtual element formulations for large incompressible strains (2021) (4)
Finite element simulation of myocardial stabilising structures and development of new designs (2013) (4)
Nearly-constrained transversely isotropic linear elasticity: energetically consistent anisotropic deformation modes for mixed finite element formulations (2020) (4)
Geometric adaption of resorbable myocardial stabilizing structures based on the magnesium alloys LA63 and ZEK100 for the support of myocardial grafts on the left ventricle (2012) (4)
Biocompatibility and degradation of the open-pored magnesium scaffolds LAE442 and La2 (2021) (4)
Contact Boundary Value Problem and Weak Form (2006) (4)
A Coupled 3D Discrete‐Finite Element Method for the Simulation of Granular Materials and Their Interaction with Solid Structures (2008) (4)
Comparison of different error estimators for contact problems (2000) (4)
On two simple virtual Kirchhoff-Love plate elements for isotropic and anisotropic materials (2021) (3)
A formulation for the four-node quadrilateral element. Pt. 1: Plane element (1995) (3)
Modelling the thermoplastic material behaviour of a tailored formed joining zone on a microscopic length scale with focus on the steel component (2017) (3)
Interactive control of non-linear finite element calculations by an expert system (1991) (3)
Discretization Methods for Solids Undergoing Finite Deformations (2016) (3)
Application of Enhanced Peridynamic Correspondence Formulation for Three-Dimensional Simulations at Large Strains (2020) (3)
A discontinuous Galerkin Finite Element Method for linear elasticity using a mixed integration scheme to circumvent shear‐locking (2016) (3)
Wear Simulation Based on Node-to-Segment Element (2004) (3)
Influence of Moisture Content and Wet Environment on the Fatigue Behaviour of High-Strength Concrete (2022) (3)
Discrete Element Methods: Basics and Applications in Engineering (2020) (3)
Solution Methods for Time Dependent Problems (2008) (3)
Low‐order locking‐free mixed finite element formulation with approximation of the minors of the deformation gradient (2019) (3)
Biomechanical Effects of a Cross Connector in Sacral Fractures – A Finite Element Analysis (2021) (3)
Mathematical Modeling and Numerical Simulation of Atherosclerosis Based on a Novel Surgeon’s View (2021) (3)
Direct computation of instability points with inequality constraints using the Finite Element Method (2001) (3)
A DOMAIN-SPECIFIC PROGRAMMING LANGUAGE FOR PARTICLE SIMULATIONS ON DISTRIBUTED-MEMORY PARALLEL COMPUTERS (2013) (3)
A 3D study of the contact interface behavior using elastic-plastic constitutive equations (2006) (3)
Simulating the Microstructure of cement‐based Construction Materials (2005) (3)
A Numerical Review of Multi-Fluid SPH Algorithms for High Density Ratios (2016) (3)
Numerical modelling of intergranular fracture in polycrystalline materials and grain size effects (2011) (3)
A multiscale DEM–FEM coupled approach for the investigation of granules as crash-absorber in ship building (2021) (3)
Virtual Element Method for Cross-Wedge Rolling during Tailored Forming Processes (2020) (3)
Direct computation of instability points with inequality constraints using the FEM (2003) (3)
PARSCALE-AN OPEN-SOURCE LIBRARY FOR THE SIMULATION OF INTRA-PARTICLE HEAT AND MASS TRANSPORT PROCESSES IN COUPLED SIMULATIONS (2015) (3)
Effects of Debonding on Thermal Conduction and Humidity Diffusion at Mesoscale of Concrete (2014) (3)
Non-Linear Finite Element Analysis of Solids and Structures – Volume 2: Advanced Topics, by Michael Crisfield, Wiley, Chichester, 1997, No. of pages 508, ISBN: 0-471-95649-X. (1999) (3)
3D orientation data – A comparison of diffraction contrast tomography and serial sectioning electron backscatter diffraction for the nickel-base superalloy IN738LC (2020) (2)
Direct Numerical Simulation of Particulate Flows Using a Fictitious Domain Method (2014) (2)
Recent trends in computational methods for contact problems (1993) (2)
A new element formulation for nonlocal damage models (1997) (2)
Special issue on computational methods for interface mechanical problems (2012) (2)
A Language and Development Environment for Parallel Particle Methods (2017) (2)
Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing (2020) (2)
Elastic-plastic analysis of metallic shells at finite strains (2007) (2)
Numerical simulation and experimental validation of biofilm in a multi-physics framework using an SPH based method (2016) (2)
An adaptive finite element method for elastoplastic contact problems (1995) (2)
Statics – Formulas and Problems (2017) (2)
Large Deformations of Thin Shells: Theory and Finite-Element-Diskretization (1990) (2)
A Concept for the Extension of the Assumed Stress Finite Element Method to Hyperelasticity (2019) (2)
Application of a parallel algebraic multigrid method for the solution of elastoplastic shell problems (1997) (2)
The consistent strain method in finite element plasticity (1995) (2)
Discretization of the Continuum (2006) (2)
Computational methods for contact problems (1995) (2)
A Concurrent Multiscale Approach to Non-cohesive Granular Materials (2011) (2)
Effect of pore size on tissue ingrowth and osteoconductivity in biodegradable Mg alloy scaffolds (2022) (2)
Discrete Modeling of Granular Materials (2009) (2)
Five Lectures on Nonlinear Finite Element Methods (1988) (2)
A pore-scale approach of two-phase flow in granular porous media (2020) (2)
Fundamental Micro–Macro Concepts (2008) (2)
Material Characterization Based on Micro-Structural Computations and Homogenization (2008) (2)
Internal Thickness Extrapolation (2018) (2)
Discretization, Small Deformation Contact (2006) (2)
Convergence Studies for 3D Smooth Frictional Contact Elements Based on the Quartic Bézier Surfaces (2002) (2)
A finite element formulation based on the theory of a Cosserat point (2005) (2)
Modelling thermoplastic material behaviour of dual‐phase steels on a microscopic length scale (2015) (2)
Developing a model for the microscopic material behaviour of a tailored formed joining zone of an aluminium‐steel hybrid solid component (2018) (2)
Special Finite Elements for Continua (2008) (2)
Microstructural Decomposition Error Estimates (1999) (2)
An efficient thermomechanically coupled contact element based on microscopic physical behaviour of surfaces (1991) (2)
Automation of Sensitivity Analysis (2016) (2)
An updated Lagrangian formulation for Timoshenko beams including non-conservative loads for divergence-type systems (1983) (2)
FROM THE NOTIONS OF NONLINEARITY TOLERANCES TOWARDS A DEFICIENCY IN COMMERCIAL TRANSIENT ANALYSIS SOFTWARES AND ITS SOLUTION (2015) (2)
Systematic Fitting and Comparison of Hyperelastic Continuum Models for Elastomers (2023) (2)
Strategies to Apply Soil Models Directly as Friction Laws in Soil Structure Interactions (2017) (2)
Mechano-chemo-biological computational models for arteries in health, disease and healing: from tissue remodelling to drug-eluting devices. (2020) (2)
Non‐linear finite element analysis of solids and structures, volume 1: Essentials, M. A. Crisfield, John Wiley. ISBN: 0‐471‐92956‐5 (1994) (1)
Multilevel Material Modeling to Study Plastic Deformation for Sheet-Bulk Metal Forming Under Different Loading Histories (2020) (1)
On numerical analysis of thermomechanical contact problems (1994) (1)
Tension and Compression in Bars (2011) (1)
Loading equine oocytes with cryoprotective agents captured with a finite element method model (2021) (1)
A micro-thermo-mechanical model for a tailored formed joining zone deformed by die forging (2019) (1)
Special Issue of Selected ECCM 99 Contributions (2001) (1)
A design concept of active cooling for tailored forming workpieces during induction heating (2021) (1)
Computational/Statistical Testing Methods (2008) (1)
About the Microstructural Effects of Polycrystalline Materials and their Macroscopic Representation at Finite Deformation (2012) (1)
BEAM AND SHELL ELEMENTS FOR THIN-WALLED ALUMINIUM STRUCTURES (2006) (1)
Special Issue on Fracture and Contact Mechanics for Interface Problems (2012) (1)
Comparison Of Different Error Measures ForAdaptive Finite Element Techniques Applied ToContact Problems Involving Large Elastic Strains (1970) (1)
A three-dimensional contact element based on the Moving Friction Cone approach (2003) (1)
Finite Element Methods for Rolling Contact (2000) (1)
Dynamics - formulas and problems (2017) (1)
A Study on 3D Contact of Rough Surfaces Considering Finite Elastoplasticity (2007) (1)
A Discontinuous Shell Element for the Delamination Analysis of Composite Laminates (2016) (1)
Frictional Contact of Rubber on rough Surfaces (2006) (1)
An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal–Plasticity Model (2017) (1)
Computational modeling of hydrogel cross‐linking based on reaction‐diffusion theory (2019) (1)
INTERACTION OF PARTICLES VIA SOLID INTERFACE : MODEL AND ANALYSIS − PARTICLES 2013 (2013) (1)
A small-sliding node-to-node formulation for beam-to-beam frictional contact with large displacements (2019) (1)
The Art of Modeling in Solid Mechanics (2017) (1)
Membrane mode enhanced cohesive zone element (2021) (1)
Self-actuating fiber composites for auto-adaptive structures (2001) (1)
A Finite Element Algorithm for Electromechanical Contact Problems (2008) (1)
The quadrilateral parametric contact element based on the moving friction cone formulation (2006) (1)
Aspects of the Facet‐Edge Data Structure for the Construction of Voronoi Cells (2010) (1)
Kinematics of a Point (2017) (1)
Homogenized thermal properties of 3D composites with full uncertainty in the microstructure (2016) (1)
Computational Mechanics in Science and Engineering – Quo Vadis (2018) (1)
An Adaptive Finite Element Method for Large Deformation Frictional Contact Problems (1999) (1)
Development of Magnesium Alloy Scaffolds to Support Biological Myocardial Grafts: A Finite Element Investigation (2015) (1)
ON PERTURBATION BEHAVIOUR IN NON-LINEAR DYNAMICS (1993) (1)
Towards h-Adaptive FE-procedures for Shell Problems in Finite Elasto-Plasticity (1999) (1)
A Contact Homogenization Framework for Granular Interfaces (2009) (1)
3D Fracture Modeling by Extended Finite Element Method and Gradient Enhanced Damage (2017) (1)
On a virtual element formulation for trusses and beams (2022) (1)
Meshless analysis of shear deformable shells: boundary and interface constraints (2016) (1)
A Petrov–Galerkin transformation that eliminates spurious oscillations for heterogeneous diffusion–reaction equations (2001) (1)
Peridynamic Galerkin method: an attractive alternative to finite elements (2022) (1)
A Computational Model for Biological Tissues Considering the Influence of Injury on Growth and Remodelling (2019) (1)
Statistical characterization of granular material applied as crash absorber in ship building (2017) (1)
A continuum based framework for the finite element analysis of proximal arteries (1996) (1)
A MOLECULAR DYNAMICS-CONTINUUM CONCURRENT MULTISCALE MODEL FOR QUASI-STATIC NANOSCALE CONTACT PROBLEMS (2012) (1)
A 3D contact investigation of rough surfaces considering elastoplasticity DOI: 10.5585/exacta.v6i1.796 (2009) (1)
A computational homogenization framework for soft elastohydrodynamic lubrication (2012) (1)
Nonlinear dynamics of shells under finite deformations: theory, finite element formulation, and integration schemes (1997) (1)
A Multiscale Projection Method for the Analysis of Fiber Microbuckling in Fiber Reinforced Composites (2020) (1)
Red blood cell simulation using a coupled shell–fluid analysis purely based on the SPH method (2018) (1)
Treatment of Brittle Fracture in Solids with the Virtual Element Method (2020) (1)
DEVELOPMENT AND VERIFICATION OF A PARTICLE NUMBER DENSITY VARIANT OF SPH TO ROBUSTLY INCORPORATE ENERGY AND HEAT TRANSFER (2013) (1)
Contact between Beams and Shells (2010) (1)
Mixed peridynamic formulations for compressible and incompressible finite deformations (2020) (0)
3D beam-to-beam contact within coupled electromechanical fields: a finite element model (2006) (0)
One 3D adaptive fragmentation procedure for the explicit simulation of brittle material cracking (2006) (0)
Efficient multiscale modeling of heterogeneous materials using deep neural networks (2023) (0)
Foreword to the Special issue: Challenges in Computational Mechanics (2008) (0)
A machine learning based plasticity model using proper orthogo- nal decomposition (2020) (0)
A Micro‐ Thermomechanical coupled Finite‐Element Model for the Simulation of Particulate Cellular Solids at Finite Strains (2003) (0)
Computation of Critical Points with Contact Constraints (2006) (0)
A Basic Finite Element Implementation (2008) (0)
Stress, Strain, Hooke’s Law (2017) (0)
Mixed Meshless Analysis of Heterogeneous Structures Using Staggered Gradient Elasticity (2016) (0)
A modified Gurson-type plasticity model at finite strains: formulation, numerical analysis and phase-field coupling (2017) (0)
A comparative study of incompressible and weakly-compressible multi-fluid flows in SPH and their performance (2017) (0)
Examining errors and correction techniques for SPH (2018) (0)
Mesoscale constitutive modeling of non-crystallizing filled elastomers (2016) (0)
Effective elastic properties of heterogeneous materials with imperfect finite thickness interfaces (2011) (0)
A finite element method for contact using a third medium (2013) (0)
Simulation of finite elasto-plastic strains using the Virtual Element Method (2019) (0)
ISOGEOMETRIC CONTACT ANALYSIS USING A THIRD MEDIUM (2015) (0)
A computational homogenization approach for a three-level hierarchical composite material (2010) (0)
Delamination of metal-polymer interfaces in microelectronics (2009) (0)
Porous-ductile fracture in thermo-elasto-plastic solids with contact applications (2019) (0)
Direct and inverse identification of constitutive parameters from the structure of soft tissues. Part 2: dispersed arrangement of collagen fibers (2019) (0)
On the Four-node Quadrilateral Element (2011) (0)
Direct and inverse identification of constitutive parameters from the structure of soft tissues. Part 1: micro- and nanostructure of collagen fibers (2018) (0)
Kinetics of a Rigid Body (2020) (0)
A Sharp-Interface Model of the Diffusive Phase Transformation in a Nickel-Based Superalloy (2022) (0)
The Peridynamic Petrov Galerkin Method-A Generalized Peridynamic Correspondence Formulation for Finite Elasticity and Fluid Flows (2019) (0)
Computational Simulation of Biofilm Growth on Dental Implant in a Multi-Physics Framework (2015) (0)
On contact geometrical relationship (1995) (0)
Modelling and experimental testing of expanded granules as crash‐absorber for double hull ships (2018) (0)
Adaptive Multi‐scale Modeling Error Estimation for Composites (2011) (0)
Spatial Discretization Techniques (2008) (0)
Constitutive modelling of finite thickness interfaces in polycrystalline materials (2011) (0)
Development of a Contact Element for Finite Deformations using the MortarMethod (2003) (0)
On the stability analysis of hyperelastic boundary value problems using three- and two-field mixed finite element formulations (2017) (0)
Isogeometric treatment of multi-patch contact and debonding problems including local refinement with T-splines (2013) (0)
ADAPTIVE REFINEMENT TECHNIQUE FOR DISCRETE STATIC MODELS OF FRACTURE (2020) (0)
Computational Homogenization of Damage in the Hardened Cement Paste due to Alkali Silica Reaction (2011) (0)
3D Dynamic Crack under Cyclic Loading using XFEM: Numerical Treatment (2019) (0)
Book Review: S. Mohammadi, Discontinuum Mechanics Using Finite and Discrete Elements. (2004) (0)
3D Virtual Elements for Elastodynamic Problems (2021) (0)
Notes on a novel finite element for anisotropy at large strains (2017) (0)
Dynamic brittle fracture by XFEM and gradient-enhanced damage (2017) (0)
Investigation of heat source modeling for selective laser melting (2018) (0)
Simulation of fracture processes using the Virtual Element Method (2019) (0)
Material modeling of ferritic steel on microscopic length scale under cyclic loading (2021) (0)
Moments of Inertia (2017) (0)
Nonconvex–Nonderivative Genetic Material Design (2008) (0)
Virtual element formulation for gradient elasticity (2023) (0)
Modelling thermoplastic material behaviour of dual‐phase steels on a microscopic length scale ‐ numerical treatment (2016) (0)
Mixed methods in finite element plasticity (1995) (0)
Virtual Elements for computational anisotropic crystal plasticity (2023) (0)
Kinetics of a Point Mass (2017) (0)
Parallel High Performance Simulation for the Stabilized Optimal Transportation Meshfree Method (2018) (0)
DIE FILLING PROCESS SIMULATION USING DISCRETE ELEMENT METHOD (DEM) (2020) (0)
Approximation of incompressible large deformation elastic problems: some unresolved issues (2013) (0)
Generating virtual process maps of SLM using powder-scale SPH simulations (2019) (0)
On the incompressibility constraint of the four-node quadrilateral element (1995) (0)
Training and testing a machine learning based elasto-plasticity model (2019) (0)
Kinematik des Punktes (2019) (0)
One fragmentation procedure for brittle material cracking (2006) (0)
Modeling Coupled Multifield Processes (2008) (0)
Comparison of Different Error Indicators for Contact Problems Involving Large Elastic Strains (2003) (0)
Numerical solution of nonlinear problems using low order elements (1995) (0)
On the efficiency of new and old strategies for solving contact problems (1996) (0)
NUMERICAL SIMULATION OF PENETRATION PROBLEMS IN GEOTECHNICAL ENGINEERING WITH THE PARTICLE FINITE ELEMENT METHOD (PFEM) (2020) (0)
Magnesium Alloys for Open-Pored Bioresorbable Implants (2020) (0)
Customization of GiD & FEAP for Scientific Applications (2002) (0)
The dynamic analysis of stochastic thin-walled structures under thermal–structural–acoustic coupling (2019) (0)
Isogeometric contact and debonding analyses using T-splines (2014) (0)
Modelling Metals At Finite Deformation (2010) (0)
IS-Computational Physics of Dry and Multiphasic Granular Media Absorbing boundary conditions for granular acoustics (2020) (0)
Coupled DE-FE approach for numerical simulation of the collision of particle-filled double-hull ships (2019) (0)
A multiscale DEM–FEM coupled approach for the investigation of granules as crash-absorber in ship building (2021) (0)
Applying Membrane Mode Enhanced Cohesive Zone Elements on Tailored Forming Components (2020) (0)
3D Ductile crack propagation with the XFEM (2015) (0)
Computational modelling of granular materials during confined compression with application in ship building (2017) (0)
Finite Deformation Thermomechanical Contact Homogenization Framework (2011) (0)
A curing model for the numerical simulation within additive manufacturing of soft polymers using peridynamics (2020) (0)
Computing pointwise contact between bodies: a class of formulations based on master–master approach (2019) (0)
Domain Decomposition Analogies and Extensions (2008) (0)
Multiscale analysis applied to material modeling (2016) (0)
Modeling of Finite Gradient Elasticity Using Optimal Transportation Method (2018) (0)
A formulation to define the contact surface inthe 2D mortar finite element method (2006) (0)
A chemo-mechanical model for hydrogel gelation : coupling of fluid swelling , crosslinking shrinkage and reactive-diffusive mechanisms (2019) (0)
Parallel Multiphysics Simulation for the Stabilized Optimal Transportation Meshfree (OTM) (2022) (0)
Notes on a novel finite element for anisotropy at large strains (2016) (0)
SHAPE OPTIMIZATION OF ELASTO-PLASTIC STRUCTURES WITH SHAKEDOWN CONSTRAINTS (2005) (0)
A FEM-SPH coupling approach for the simulation of FSI problems with free surfaces (2017) (0)
AN INVESTIGATION INTO THE EFFECT OF PARTICLE PLATYNESS ON THE STRENGTH OF GRANULAR MATERIALS USING THE DISCRETE ELEMENT METHOD (2016) (0)
Automation of Discretization Techniques (2016) (0)
A METHOD OF TWO-SCALE CHEMO-THERMAL-MECHANICAL COUPLING FOR CONCRETE (2020) (0)
Correction to: An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal–Plasticity Model (2020) (0)
Multiscale diffusion–thermal–mechanical cohesive zone model for concrete (2015) (0)
Parallel Multiphysics Simulation for the Stabilized Optimal Transportation Meshfree Framework (2019) (0)
3D multiscale crack propagation using the XFEM applied to a gas turbine blade (2013) (0)
Thermo-mechanical Contact (2006) (0)
Multiplicative, Non-Newtonian Viscoelasticity Models for Rubber Materials and Brain Tissues: Numerical Treatment and Comparative Studies (2023) (0)
Computational mechanics of material interfaces : trends and challenges (2010) (0)
A Multiscale Simulation of Fiber Microbuckling in Long-Fiber Composite Laminates (2019) (0)
Computational contact mechanics (2012) (0)
Modeling of Single‐Slip Finite Strain Crystal Plasticity via the Virtual Element Method (2021) (0)
Special Structural Elements (2008) (0)
A finite element formulation based on the Cosserat point theory (2006) (0)
Simulation of bone ingrowth into bone substitutes on implant level length scale (2018) (0)
On the computational aspects of comminution in discrete element method (2017) (0)
AN ENERGY-MOMENTUM INTEGRATION SCHEME FOR THE NONLINEAR DYNAMICS OF SHELLS . APPLICATIONS TO CHAOTIC AND FREE LARGE OVERALL MOTION (1998) (0)
Thermo‐mechanical modeling of turbine blades taking into account structural defects (2017) (0)
Preface of the guest‐editors (2007) (0)
Non-Local Ductile Damage Formulations for Sheet Bulk Metal Forming (2016) (0)
Automation of Primal Analysis (2016) (0)
Thermo-electro-mechanical coupling in beam-to-beam contact (2006) (0)
Failure of high-speed bearing at cyclic impact-sliding contacts: Numerical and experimental analysis (2023) (0)
On the Numerical Simulation of Hardened Cement Paste (2007) (0)
Stochastic multiscale homogenization analysis of heterogeneous materials under finite deformations with full uncertainty in the microstructure (2015) (0)
Finite element formulations for large strain anisotropic material with inextensible fibers (2016) (0)
Computational Plasticity based on the Virtual Element Method (2021) (0)
Material parameter characterization of multicellular granules as crash absorber with application in ship building (2017) (0)
A Selection of Benchmark Problems in Solid Mechanics and Applied Mathematics (2020) (0)
Rebound Characteristics of Complex Particle Geometries (2019) (0)
An adaptive model order reduction by proper snapshot selection for nonlinear dynamical problems (2016) (0)
An extended meshfree Peridynamics correspondence framework to simulate extrusion based Additive Manufacturing processes (2019) (0)
In vivo investigation of open-pored magnesium scaffolds LAE442 with different coatings in an open wedge defect (2022) (0)
Elastic-plastic analysis of metallic shells at finite strains (Análise elasto-plástica de cascas metálicas por deformações finitas) (2007) (0)
Chemo‐Thermo‐Mechanics Coupling Applied in Hardened Cement Paste (2010) (0)
Multiscale Modeling of Alkali Silica Reaction Induced Damage in Concrete: Coupled Hydro-Chemical and Thermo-Mechanical Effects (2014) (0)
Crack face contact for a hexahedral-based XFEM formulation (2012) (0)
A multi-fluid SPH algorithm for high density ratios implemented on GPU (2015) (0)
XFEM ANALYSIS – INCLUDING BUCKLING – OF COMPOSITE SHELLS CONTAINING DELAMINATION (2016) (0)
APPLICATION OF KINETIC DAMPING IN DYNAMIC MATERIAL POINT METHOD FOR STATIC PROBLEMS (2020) (0)
Robust Contact and Friction Model for the Fatigue Estimate of a Wire Rope in the Mooring Line of a Floating Offshore Wind Turbine (2020) (0)
11 Closing comments (2005) (0)
Spline-based smooth beam-to-beam contact model (2023) (0)
A primal discontinuous Petrov‐Galerkin Finite Element Method for linear elasticity (2017) (0)
Powder compaction with polygonal particles built from radially extending one-dimensional frictional devices (2015) (0)
A polyconvex framework for the multiscale homogenization of cardiovascular tissues (2015) (0)
Metal Particle Melting and Solidification for Powder Based Additive Manufacturing using the Optimal Transportation Meshfree Method (2017) (0)
A mortar method for thermomechanically coupled problems (2007) (0)
Numerical Simulation of Particle-Fluid Systems (2011) (0)
A New Finite Element Model of Spiral Strand Wire Ropes for Fatigue Life Estimate of a Mooring Line (2019) (0)
A finite element formulation based on the theory of a Cosserat point — Extension to Ogden material (2006) (0)
Different weak FE‐formulations for 2‐D frictionless Large Deformation Contact based on the Mortar Method (2004) (0)
Efficient virtual element formulations for compressible and incompressible finite deformations (2017) (0)
A nonlocal cohesive zone model for studying crack propagation in mechanical systems with finite thickness interfaces (2011) (0)
Fiber-reinforced materials: finite elements for the treatment of the inextensibility constraint (2017) (0)
Experimental investigation of granular material as crash-absorber for double hull ships (2019) (0)
Advanced Computational Engineering (2012) (0)
Fundamental Weak Formulations (2008) (0)
Arterial tissues and their inflammatory response to collagen damage: A continuum in silico model coupling nonlinear mechanics, molecular pathways, and cell behavior. (2023) (0)
Trends in computational material modeling (2021) (0)
Vortex Particle Intensified Large Eddy Simulation (2020) (0)
On two simple virtual Kirchhoff-Love plate elements for isotropic and anisotropic materials (2021) (0)
Nonlinear discontinuous Petrov–Galerkin methods (2018) (0)
Towards the effective behaviour of polycrystalline materials for sheet bulk metal forming processes (2011) (0)
Advances in Computational Methods in Contact Mechanics, Special Issue of Computational Methods in Applied Mechanics and Engineering (CMAME) (2010) (0)
Kinematics of Rigid Bodies (2017) (0)
ELECTRIC-MECHANICAL BEAM-TO-BEAM CONTACT (2004) (0)
An adaptive global-local approach for phase-field ductile fracture (2019) (0)
NURBS- and T-spline-based isogeometric cohesive zone modeling of interface debonding (2014) (0)
Finite-Element-Methoden und ihre Absicherung in der Mathematik (1990) (0)
Error Control in Frictional Contact Problems (2001) (0)
Advanced Discretization Methods for Contact Mechanics (2018) (0)
Novel modeling strategies for arterial multiphysics (2016) (0)
Some Basics of the Mechanics of Solid Continua (2008) (0)
Multibody Contact Algorithms for Fracturing Solids (2011) (0)
Uncertain Dynamic Characteristic Analysis for Structures with Spatially Dependent Random System Parameters (2023) (0)
Chances and Visions of Advanced Mechanics (2010) (0)
3D VS. 2D MODELLING OF CRACKING AND PLASTICITY IN POLYCRYSTALLINE MATERIALS (2014) (0)
Random homogenization analysis for heterogeneous materials with full randomness and correlation in microstructure based on finite element method and Monte-carlo method (2014) (0)
Preface (2014) (0)
Automation of Research in Computational Modeling (2016) (0)
Modelling tailored forming joining zones with internal thickness extrapolation elements (2019) (0)
Foundamentals of Nonlinear Instabilities and Response Analysis of Discretized Systems (1995) (0)
A virtual element method for contact (2016) (0)
Solution Methods for General Postcritical Analysis (1988) (0)
Adaptive Finite Element Methods for Contact Problems (2006) (0)
Multi-Scale Modelling of Reactive Particle-Based Processes DEM particle characterization by artificial neural network and macroscopic experiments (2020) (0)
Multi-Skalen-Methoden und Modelladaptivitaet bei der Berechnung von komplexen Strukturen / Multi-scale methods and model adaptivity for the analysis of complex structures (2004) (0)
A contact layer element for large deformations (2015) (0)
The Use of Particle Methods for the Simulations of Additive Manufacturing Processes (2020) (0)
An extension of assumed stress finite elements to a general hyperelastic framework (2019) (0)
Automated modeling of nickel‐based superalloys (2017) (0)
3D ductile crack propagation within a polycrystalline microstructure using XFEM (2017) (0)
Special issue on computational methods for interface mechanical problems (2012) (0)
Erratum to: Automation of Finite Element Methods (2016) (0)
A sharp-interface model for diffusional evolution of precipitates in visco-plastic materials (2022) (0)
Isogeometric analysis of 3D large deformation frictional contact problems and comparison with Lagrange and Bézier interpolations (2011) (0)
Isogeometric frictionless contact analysis with the third medium method (2018) (0)
A virtual element method for 3D contact problems with non-conforming meshes (2022) (0)
Thermomechanical Multiscale FEM Approach for Sliding Elastomers on Rough Surfaces (2014) (0)
NUMERICAL SIMULATION OF SHAPED CHARGE JET PENETRATING A PLATE USING SMOOTHED PARTICLE HYDRODYNAMICS (2020) (0)
Experimental and numerical characterization of expanded glass granules (2017) (0)
Continuum Solid Mechanics and Weak Forms (2006) (0)
The Virtual Element Method for the numerical homogenization of electro‐mechanical responses (2021) (0)
Simulation of sheet-bulk metal forming processes with simufact.forming using user-subroutines (2016) (0)
A mortar formulation for 3D large deformation contact using NURBS-based isogeometric analysis and the augmented Lagrangian method (2011) (0)
Mixed virtual element formulations for incompressible and inextensible problems (2023) (0)
A DISCRETE ELEMENT MODEL FOR COHESIVE SOIL (2020) (0)
Various Extensions and Further Interpretations of Partitioning (2008) (0)
Computational chemo-mechano-biological remodelling of arterial tissue constituents (2017) (0)
A semi‐implicit multi‐fluid SPH algorithm suitable for GPU (2016) (0)
Using Delaunay triangulations to investigate the effect of interparticle friction on critical-state DEM simulations (2015) (0)
Basic Equations of Continuum Mechanics (2016) (0)
Virtual elements for finite thermo-plasticity problems (2019) (0)
Free surface tension in incompressible smoothed particle hydrodynamcis (ISPH) (2019) (0)
Self-contact modeling on beams experiencing loop formation (2014) (0)
EVALUATION, RELIABLE ESTIMATION, AND CONTROL OF COMPUTATIONAL ERRORS IN SOLID AND STRUCTURAL MECHANICS (2014) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Peter Wriggers?

Peter Wriggers is affiliated with the following schools:

Peter Wriggers's Academic­Influence.com Rankings

Peter Wriggers's Degrees

Why Is Peter Wriggers Influential?

Peter Wriggers's Published Works

Published Works

What Schools Are Affiliated With Peter Wriggers?

Peter Wriggers's AcademicInfluence.com Rankings