Prinya Chindaprasirt

Prinya Chindaprasirt's AcademicInfluence.com Rankings

Engineering

#3591

World Rank

#4693

Historical Rank

Materials Science

#145

World Rank

#147

Historical Rank

Applied Physics

#702

World Rank

#724

Historical Rank

engineering Degrees

Prinya Chindaprasirt

Physics

#4442

World Rank

#6102

Historical Rank

physics Degrees

Download Badge

Engineering
Physics

Prinya Chindaprasirt's Degrees

Bachelors Physics Chulalongkorn University
Masters Materials Science Stanford University

Why Is Prinya Chindaprasirt Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Prinya Chindaprasirt's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

NaOH-activated ground fly ash geopolymer cured at ambient temperature (2011) (745)
Workability and strength of coarse high calcium fly ash geopolymer (2007) (719)
Influence of NaOH solution on the synthesis of fly ash geopolymer (2009) (696)
Comparative study on the characteristics of fly ash and bottom ash geopolymers. (2009) (570)
Effect of fly ash fineness on compressive strength and pore size of blended cement paste (2005) (554)
Workability and strength of lignite bottom ash geopolymer mortar. (2009) (395)
Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar (2004) (394)
Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems (2012) (367)
Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly (2008) (350)
Resistance to chloride penetration of blended Portland cement mortar containing palm oil fuel ash, rice husk ash and fly ash (2008) (312)
Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer (2015) (304)
Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack (2012) (287)
The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured (2014) (287)
Effect of fly ash fineness on microstructure of blended cement paste (2007) (287)
Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste (2014) (283)
Strength and water permeability of concrete containing palm oil fuel ash and rice husk-bark ash (2007) (271)
Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete (2009) (260)
Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete (2010) (259)
Handbook of alkali-activated cements, mortars and concretes (2015) (253)
Cement paste characteristics and porous concrete properties (2008) (253)
High-Strength Geopolymer Using Fine High-Calcium Fly Ash (2011) (248)
Utilization of bagasse ash in high-strength concrete (2012) (231)
Sulfate resistance of blended cements containing fly ash and rice husk ash (2007) (229)
Influence of recycled aggregate on fly ash geopolymer concrete properties (2016) (194)
Influence of fly ash fineness on the chloride penetration of concrete (2007) (189)
Effect of grinding on chemical and physical properties of rice husk ash (2009) (184)
High calcium fly ash geopolymer stabilized lateritic soil and granulated blast furnace slag blends as a pavement base material. (2018) (178)
Effect of chemical admixtures on properties of high-calcium fly ash geopolymer (2011) (171)
Effect of sodium hydroxide concentration on chloride penetration and steel corrosion of fly ash-based geopolymer concrete under marine site (2014) (170)
Setting Time, Strength, and Bond of High-Calcium Fly Ash Geopolymer Concrete (2015) (170)
Pervious high-calcium fly ash geopolymer concrete (2012) (169)
Properties of pervious geopolymer concrete using recycled aggregates (2013) (168)
Compressive strength and degree of reaction of biomass- and fly ash-based geopolymer (2010) (167)
Factors influencing strength development in clay–fly ash geopolymer (2013) (166)
High calcium fly ash geopolymer mortar containing Portland cement for use as repair material (2015) (164)
Preparation of fly ash and rice husk ash geopolymer (2009) (162)
Properties of pervious concrete containing recycled concrete block aggregate and recycled concrete aggregate (2016) (157)
Utilization of waste glass to enhance physical–mechanical properties of fired clay brick (2016) (149)
Predicting the chloride penetration of fly ash concrete in seawater (2009) (149)
Effect of palm oil fuel ash fineness on the microstructure of blended cement paste (2011) (147)
Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash (2018) (145)
Influence of rice husk ash on mechanical properties and fire resistance of recycled aggregate high-calcium fly ash geopolymer concrete (2020) (136)
Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix (2017) (135)
Lightweight geopolymer concrete containing aggregate from recycle lightweight block (2013) (132)
Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer. (2010) (128)
Influence of rice husk–bark ash on mechanical properties of concrete containing high amount of recycled aggregates (2008) (125)
Use of lightweight aggregates in pervious concrete (2013) (120)
Lightweight geopolymer made of highly porous siliceous materials with various Na2O/Al2O3 and SiO2/Al2O3 ratios (2011) (119)
Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer (2013) (118)
Properties of metakaolin-high calcium fly ash geopolymer concrete containing recycled aggregate from crushed concrete specimens (2018) (118)
Very Low Loss Tangent and High Dielectric Permittivity in Pure‐CaCu3Ti4O12 Ceramics Prepared by a Modified Sol‐Gel Process (2012) (112)
Factors affecting the shrinkage of fly ash geopolymers (2011) (109)
Role of microwave radiation in curing the fly ash geopolymer (2013) (109)
Sulfate Resistance of Clay-Portland Cement and Clay High-Calcium Fly Ash Geopolymer (2015) (106)
Mechanical and thermal properties of lightweight geopolymer mortar incorporating crumb rubber (2018) (98)
Flexural performance and toughness of hybrid steel and polypropylene fibre reinforced geopolymer (2018) (98)
Utilization of fly ash blends from pulverized coal and fluidized bed combustions in geopolymeric materials (2011) (96)
Effect of carbon dioxide on chloride penetration and chloride ion diffusion coefficient of blended Portland cement mortar (2008) (90)
Properties of lightweight fly ash geopolymer concrete containing bottom ash as aggregates (2016) (90)
Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste (2018) (88)
Recycled aggregate high calcium fly ash geopolymer concrete with inclusion of OPC and nano-SiO2 (2018) (88)
Strength and resistance to sulfate and sulfuric acid of ground fluidized bed combustion fly ash–silica fume alkali-activated composite (2014) (83)
Properties of high calcium fly ash geopolymer pastes with Portland cement as an additive (2013) (83)
Use of crushed clay brick and pumice aggregates in lightweight geopolymer concrete (2018) (82)
Lightweight bricks made of diatomaceous earth, lime and gypsum (2009) (80)
Performance of recycled aggregate concrete with rice husk ash as cement binder (2020) (79)
Characterization and magnetic properties of cobalt ferrite nanoparticles (2016) (78)
A study of fly ash-lime granule unfired brick (2008) (76)
Development of high volume rice husk ash alumino silicate composites (2010) (76)
Strength development and durability of alkali-activated fly ash mortar with calcium carbide residue as additive (2018) (76)
Effects of binder strength and aggregate size on the compressive strength and void ratio of porous concrete (2009) (76)
Natural fiber reinforced high calcium fly ash geopolymer mortar (2020) (75)
Synthesis of belite cement from lignite fly ash (2009) (74)
Effect of W/B ratios on pozzolanic reaction of biomass ashes in Portland cement matrix (2012) (72)
TiO2-zeolite photocatalysts made of metakaolin and rice husk ash for removal of methylene blue dye (2017) (71)
Pore Structure Changes of Blended Cement Pastes Containing Fly Ash, Rice Husk Ash, and Palm Oil Fuel Ash Caused by Carbonation (2009) (70)
Influence of fineness of rice husk ash and additives on the properties of lightweight aggregate (2009) (70)
Shrinkage behavior of structural foam lightweight concrete containing glycol compounds and fly ash (2011) (69)
Hydrothermal synthesis of calcium sulfoaluminate–belite cement from industrial waste materials (2016) (67)
Electrical conductivity and dielectric property of fly ash geopolymer pastes (2011) (67)
High-Calcium Bottom Ash Geopolymer: Sorptivity, Pore Size, and Resistance to Sodium Sulfate Attack (2013) (66)
Correlation between initial SiO2/Al2O3, Na2O/Al2O3, Na2O/SiO2 and H2O/Na2O ratios on phase and microstructure of reaction products of metakaolin-rice husk ash geopolymer (2019) (64)
Controlling ettringite formation in FBC fly ash geopolymer concrete (2013) (64)
Electrical conductivity and compressive strength of carbon fiber reinforced fly ash geopolymeric composites (2017) (62)
Compressive strength, Bending and Fracture Characteristics of High Calcium Fly Ash Geopolymer Mortar Containing Portland Cement Cured at Ambient Temperature (2016) (61)
Types of waste, properties, and durability of pore-forming waste-based fired masonry bricks (2015) (61)
Influence of fly ash fineness and shape on the porosity and permeability of blended cement pastes (2010) (60)
Mechanical Properties, Thermal Conductivity, and Sound Absorption of Pervious Concrete Containing Recycled Concrete and Bottom Ash Aggregates (2018) (60)
Use of coal ash as geopolymer binder and coarse aggregate in pervious concrete (2015) (59)
Enhancement of mechanical properties of fly ash geopolymer containing fine recycled concrete aggregate with micro carbon fiber (2021) (58)
Effect of calcium-rich compounds on setting time and strength development of alkali-activated fly ash cured at ambient temperature (2018) (57)
Use of palm oil fuel ash to improve chloride and corrosion resistance of high-strength and high-work (2011) (54)
Mechanical and micromechanical properties of alkali activated fly-ash cement based on nano-indentation (2016) (53)
Improved dielectric and nonlinear electrical properties of fine-grained CaCu3Ti4O12 ceramics prepare (2014) (52)
Assessing the effect of biomass ashes with different finenesses on the compressive strength of blend (2012) (52)
Low cost and sustainable repair material made from alkali-activated high-calcium fly ash with calcium carbide residue (2020) (51)
Potassium alkali concentration and heat treatment affected metakaolin-based geopolymer (2016) (51)
Thermal properties of lightweight concrete incorporating high contents of phase change materials (2019) (50)
Synthesis of low-temperature calcium sulfoaluminate-belite cements from industrial wastes and their hydration: Comparative studies between lignite fly ash and bottom ash (2017) (49)
Pressed lightweight concrete containing calcined diatomite aggregate (2013) (49)
Cellular Lightweight Concrete Containing Pozzolan Materials (2011) (49)
Characterization of the high-calcium fly ash geopolymer mortar with hot-weather curing systems for sustainable application (2017) (48)
Influence of loading history upon the compressive properties of concrete (1980) (48)
A Mix Design Procedure for Alkali-Activated High-Calcium Fly Ash Concrete Cured at Ambient Temperature (2018) (47)
Synthesis of nanocomposite hydrogel based carboxymethyl starch/polyvinyl alcohol/nanosilver for biomedical materials. (2020) (46)
Optimization of Biodegradable Foam Composites from Cassava Starch, Oil Palm Fiber, Chitosan and Palm Oil Using Taguchi Method and Grey Relational Analysis (2017) (45)
Leaching of heavy metals from solidified waste using Portland cement and zeolite as a binder. (2012) (45)
Effect of sodium hydroxide and sodium silicate solutions on strengths of alkali activated high calcium fly ash containing Portland cement (2017) (45)
Properties of lightweight high calcium fly ash geopolymer concretes containing recycled packaging foam (2015) (44)
Polyvinyl Alcohol (PVA)/Starch Bioactive Packaging Film Enriched with Antioxidants from Spent Coffee Ground and Citric Acid (2018) (43)
Properties of high-calcium and low-calcium fly ash combination geopolymer mortar containing recycled aggregate (2019) (43)
Thermogravimetry of ternary cement blends (2013) (43)
Properties of wood flour/expanded polystyrene waste composites modified with diammonium phosphate flame retardant (2015) (43)
Mechanical properties, chloride resistance and microstructure of Portland fly ash cement concrete containing high volume bagasse ash (2020) (43)
Optimizing mix proportion and properties of lightweight concrete incorporated phase change material paraffin/recycled concrete block composite (2016) (42)
Thermal treatment and utilization of Al-rich waste in high calcium fly ash geopolymeric materials (2012) (42)
Improved giant dielectric properties of CaCu3Ti4O12 via simultaneously tuning the electrical properties of grains and grain boundaries by F− substitution (2017) (42)
Cellular lightweight concrete containing high-calcium fly ash and natural zeolite (2013) (42)
An Experimental Investigation of the Carbonation of Blended Portland Cement Palm Oil Fuel Ash Mortar in an Indoor Environment (2009) (42)
Drying shrinkage, strength and microstructure of alkali-activated high-calcium fly ash using FGD-gypsum and dolomite as expansive additive (2020) (41)
Improvement of durability of cement pipe with high calcium fly ash geopolymer covering (2016) (40)
Strength and chloride resistance of blended Portland cement mortar containing palm oil fuel ash and fly ash (2009) (40)
Curing kinetic, thermal and adhesive properties of epoxy resin cured with cashew nut shell liquid (2015) (40)
Strength and Carbonation Model of Rice Husk Ash Cement Mortar with Different Fineness (2010) (40)
Characterization of an environment friendly lightweight concrete containing ethyl vinyl acetate waste (2016) (39)
Significantly improving the giant dielectric properties of CaCu3Ti4O12 ceramics by co-doping with Sr2+ and F- ions (2021) (39)
Apatite formation on calcined kaolin-white Portland cement geopolymer. (2015) (38)
Mixed cement containing fly ash for masonry and plastering work (2005) (38)
Changes in compressive strength, microstructure and magnetic properties of a high-calcium fly ash geopolymer subjected to high temperatures (2020) (38)
Mechanical and Thermal Properties of Recycling Lightweight Pervious Concrete (2015) (37)
An evaluation of the suitability of {SUPERPAVE} and Marshall asphalt mix designs as they relate to T (2013) (37)
Eco-production of silica from sugarcane bagasse ash for use as a photochromic pigment filler (2020) (37)
Plaster materials from waste calcium sulfate containing chemicals, organic fibers and inorganic additives (2011) (37)
Pressed lightweight fly ash-OPC geopolymer concrete containing recycled lightweight concrete aggregate (2016) (36)
Resistance to sulfate attack and underwater abrasion of fiber reinforced cement mortar (2018) (36)
Durability and Mechanical Properties of Pavement Concrete Containing Bagasse Ash (2019) (35)
Characterizations of FBC/PCC fly ash geopolymeric composites (2014) (35)
Thermal and sound properties of concrete mixed with high porous aggregates from manufacturing waste impregnated with phase change material (2020) (34)
Improving thermal properties of exterior plastering mortars with phase change materials with different melting temperatures: paraffin and polyethylene glycol (2018) (33)
Use of ternary blend of Portland cement and two pozzolans to improve durability of high-strength concrete (2014) (32)
Effect of fly ash/silica fume ratio and curing condition on mechanical properties of fiber-reinforced geopolymer (2020) (32)
Recycled Concrete Aggregates in Roadways: Laboratory Examination of Self-Cementing Characteristics (2015) (32)
Properties of cellular lightweight high calcium bottom ash-portland cement geopolymer mortar (2020) (32)
Comparative study on morphology of ground sub-bituminus FBC fly ash geopolymeric material (2015) (31)
Fire-resistant geopolymer bricks synthesized from high-calcium fly ash with outdoor heat exposure (2018) (31)
Investigation on the strength, chloride migration, and water permeability of eco-friendly concretes from industrial by-product materials (2018) (31)
Use of phase change material to improve thermal properties of lightweight geopolymer panel (2016) (30)
Effect of High-Speed Mixing on Properties of High Calcium Fly Ash Geopolymer Paste (2014) (30)
Utilization of hemp concrete using hemp shiv as coarse aggregate with aluminium sulfate [Al2(SO4)3] and hydrated lime [Ca(OH)2] treatment (2017) (29)
Creep properties of cement and alkali activated fly ash materials using nanoindentation technique (2018) (29)
Synthesis and characterization of Ba0.85Ca0.15Ti0.9Zr0.1O3 ceramics by hydrothermal method (2014) (29)
Characterization of paraffin/ultrasonic-treated diatomite for use as phase change material in thermal energy storage of buildings (2017) (29)
Use of Rice Husk-Bark Ash in Producing Self-Compacting Concrete (2014) (28)
Fabrication of durable superhydrophobic epoxy/cashew nut shell liquid based coating containing flower-like zinc oxide for continuous oil/water separation (2019) (28)
Resistance to algae and fungi formation of high calcium fly ash geopolymer paste containing TiO2 (2019) (28)
Exponentially aging functions coupled with time-dependent chloride transport model for predicting service life of surface-treated concrete in tidal zone (2019) (27)
Effect of particle size on the dielectric and piezoelectric properties of 0–3BCTZO/cement composites (2014) (26)
High calcium fly ash geopolymer containing diatomite as additive (2013) (26)
Thermoelectric Energy Conversion of p–Ca3Co4O9/n–CaMnO3 Module (2014) (26)
Use of disposed waste ash from landfills to replace Portland cement (2009) (26)
Autogenous and drying shrinkages of mortars and pore structure of pastes made with activated binder of calcium carbide residue and fly ash (2020) (25)
Effect of Oregano Essential Oil Content on Properties of Green Biocomposites Based on Cassava Starch and Sugarcane Bagasse for Bioactive Packaging (2017) (25)
Structural Lightweight Concrete Containing Recycled Lightweight Concrete Aggregate (2018) (25)
Bioactive Starch Foam Composite Enriched With Natural Antioxidants from Spent Coffee Ground and Essential Oil (2018) (25)
Effects of carbon fiber on mechanical and electrical properties of fly ash geopolymer composite (2018) (24)
Effect of self-treatment process on properties of natural fiber-reinforced geopolymer composites (2020) (24)
Development of Classified Fly Ash as a Pozzolanic Material (2008) (24)
The properties and durability of autoclaved aerated concrete masonry blocks (2015) (24)
Use of paraffin impregnated lightweight aggregates to improve thermal properties of concrete panels (2016) (23)
Comparative study of fire-resistant behaviors of high-calcium fly ash geopolymer mortar containing zeolite and mullite (2020) (23)
Optical and dielectric properties of nano-sized tricalcium aluminate hexahydrate (C3AH6) cement (2018) (23)
Cement mortars hybridized with zeolite and zeolite-like materials made of lignite bottom ash for heavy metal encapsulation (2013) (23)
Portland Cement-TiO2 triboelectric nanogenerator for robust large-scale mechanical energy harvesting and instantaneous motion sensor applications (2020) (23)
Use of recycled aggregates in pressed fly ash geopolymer concrete (2019) (23)
Strength and chloride resistance of the blended Portland cement mortar containing rice husk ash and ground river sand (2015) (23)
Reuse of recycled aggregate in the production of alkali-activated concrete (2015) (22)
Lime-calcined clay materials with alkaline activation: Phase development and reaction transition zone (2014) (22)
Challenge of adopting relatively low strength and self-cured geopolymer for road construction application: a review and primary laboratory study (2019) (22)
Properties of Concrete Pedestrian Blocks Containing Crumb Rubber from Recycle Waste Tyres Reinforced with Steel Fibres (2019) (21)
Geopolymer/Zeolite composite materials with adsorptive and photocatalytic properties for dye removal (2020) (21)
Synthesis of zeolite phases from combustion by-products (2010) (20)
The effects of replacement fly ash with diatomite in geopolymer mortar (2012) (20)
Characterization of porous alkali-activated fly ash composite as a solid absorbent (2019) (19)
Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials (2013) (19)
Effect of Oil Palm Fiber Content on the Physical and Mechanical Properties and Microstructure of High-Calcium Fly Ash Geopolymer Paste (2018) (19)
Microstructural evolution, non‐Ohmic properties, and giant dielectric response in CaCu3Ti4−xGexO12 ceramics (2017) (19)
Synthesis of polypropylene fiber/high-calcium fly ash geopolymer with outdoor heat exposure (2017) (19)
Bioactive Nanocomposite Film Based on Cassava Starch/Polyvinyl Alcohol Containing Green Synthesized Silver Nanoparticles (2020) (18)
Investigation of compressive strength and microstructures of activated cement free binder from fly ash - calcium carbide residue mixture (2019) (18)
Manuscript title: Development of strength prediction models for fly ash based geopolymer concrete (2020) (18)
Thermal storage properties of lightweight concrete incorporating phase change materials with different fusion points in hybrid form for high temperature applications (2020) (18)
An investigation of sulfate effects on compaction characteristics and strength development of cement-treated sulfate bearing clay subgrade (2020) (18)
Fabrication of self-cleaning fly ash/polytetrafluoroethylene material for cement mortar spray-coating (2020) (18)
Case investigation on application of steel fibers in roller compacted concrete pavement in Thailand (2019) (18)
Mathematical model of strength and porosity of ternary blend Portland rice husk ash and fly ash cement mortar (2008) (18)
Synthesis of porous alkali-activated materials for high-acidic wastewater treatment (2020) (17)
Fatigue Assessment of Cement-Treated Base for Roads: An Examination of Beam-Fatigue Tests (2016) (17)
Performance and evaluation of calcium carbide residue stabilized lateritic soil for construction materials (2020) (17)
Abrasion resistance behaviour of fly ash based geopolymer using nanoindentation and artificial neural network (2019) (17)
Setting, segregation and bleeding of alkali-activated cement, mortar and concrete binders (2015) (16)
Greatly enhanced dielectric permittivity in poly(vinylidene fluoride)-based polymeric composites induced by Na1/3Ca1/3Bi1/3Cu3Ti4O12 nanoparticles (2016) (16)
Utilization of Sugarcane Bagasse Ash to Improve Properties of Fired Clay Brick (2018) (16)
Microstructure and strength of blended FBC-PCC fly ash geopolymer containing gypsum as an additive (2012) (16)
Use of waste ash from various by-product materials in increasing the durability of mortar (2008) (16)
Role of Filler Effect and Pozzolanic Reaction of Biomass Ashes on Hydrated Phase and Pore Size Distribution of Blended Cement Paste (2014) (16)
Microstructure, dielectric and piezoelectric properties of 0–3 lead free barium zirconate titanate ceramic-Portland fly ash cement composites (2018) (16)
Bioconversion of Saccharum officinarum Leaves for Ethanol Production Using Separate Hydrolysis and Fermentation Processes (2019) (15)
Beneficial utilization of recycled asphaltic concrete aggregate in high calcium fly ash geopolymer concrete (2021) (15)
Synergistic effect of fly ash and glass cullet additive on properties of fire clay bricks (2021) (15)
Performances of SDCM and DCM walls under deep excavation in soft clay: Field tests and 3D simulations (2019) (15)
Adhesion characterisation of Portland cement concrete and alkali-activated binders (2019) (14)
Hybrid high calcium fly ash alkali-activated repair material for concrete exposed to sulfate environment (2021) (14)
Properties of polypropylene fiber reinforced cellular lightweight high calcium fly ash geopolymer mortar (2021) (14)
Influence of mineral additives on the properties of pervious concrete (2017) (13)
Setting time, compressive strength and sulfuric acid resistance of a high calcium fly ash geopolymer containing borax (2018) (13)
Effect of graphene oxide on single fiber pullout behavior (2021) (13)
A mathematical model for the prediction of damage in concrete (1981) (13)
Bone metastasis from cholangiocarcinoma mimicking osteosarcoma: A case report and review literature. (2018) (13)
Bioactivity enhancement of calcined kaolin geopolymer with CaCl2 treatment (2016) (13)
Influence of loading history upon the tensile properties of concrete (1980) (13)
Dual-responsive shape memory and self-healing ability of a novel copolymer from epoxy/cashew nut shell liquid and polycaprolactone (2020) (13)
Properties of pervious concrete containing high-calcium fly ash (2016) (13)
Calcium phosphate powders synthesized from CaCO3 and CaO of natural origin using mechanical activation in different media combined with solid-state interaction. (2021) (12)
Effect of free oxygen radical anions and free electrons in a Ca12Al14O33 cement structure on its optical, electronic and antibacterial properties (2019) (12)
Residual flexural behavior of fiber reinforced concrete after heating (2018) (12)
Use of burnt clay aggregate as phase change material carrier to improve thermal properties of concrete panel (2019) (12)
Lightweight Geopolymer Concrete Containing Recycled Plastic Beads (2019) (11)
Factors Influence on Shrinkage of High Calcium Fly Ash Geopolymer Paste (2012) (11)
Dielectric and piezoelectric properties of lead-free Ba 0.85 Ca 0.15 Ti 0.9−x Zr 0.1 Cu x O 3 ceramics synthesized by a hydrothermal method (2016) (11)
Hemp Fiber Reinforced Geopolymer Composites: Effects of NaOH Concentration on Fiber Pre-Treatment Process (2020) (11)
Synergistic effect of starch/poly vinyl alcohol/citric acid films decorated with in-situ green-synthesized nano silver on bioactive packaging films (2021) (10)
Heat evolution, strengths, and drying shrinkage of concrete containing high volume ground bagasse ash with different LOIs (2020) (10)
Influence of Graphene Oxide Nanoparticles on Bond-Slip Reponses between Fiber and Geopolymer Mortar (2022) (10)
Investigation of properties of lightweight concrete with calcined diatomite aggregate (2014) (10)
Use of construction and demolition waste (CDW) for alkali-activated or geopolymer concrete (2020) (10)
Comparative mechanical performances of cement-treated sand reinforced with fiber for road and pavement applications (2021) (10)
An anisotropic hyperelastic model with an application to soft tissues (2019) (10)
Sulfoaluminate cement-based concrete (2018) (9)
Optimization of ultrasound-assisted extraction of anthocyanins and bioactive compounds from butterfly pea petals using Taguchi method and Grey relational analysis (2020) (9)
Rice Husk Ash and Fly Ash Geopolymer Hollow Block Based on NaOH Activated (2022) (9)
Influence of Activation Methods on Strength and Chloride Resistance of Concrete Using Calcium Carbide Residue–Fly Ash Mixture as a New Binder (2016) (9)
Strength, Chloride Penetration and Corrosion Resistance of Ternary Blends of Portland Cement Self-compacting Concrete Containing Bagasse Ash and Rice Husk-bark Ash (2018) (9)
Reducing Loss Tangent by Controlling Microstructure and Electrical Responses in CaCu3Ti4O12 Ceramics (2013) (9)
Properties of Steel Fiber Reinforced Geopolymer (2015) (9)
Properties of hooked end steel fiber reinforced acrylic modified concrete (2018) (9)
Smart conductive nanocomposite hydrogel containing green synthesized nanosilver for use in an eco-friendly strain sensor (2021) (9)
Finishing methods and compressive strength-void ratio relationships of in-situ porous concrete pavement (2012) (9)
Green synthesis of nanosilver coating on paper for ripening delay of fruits under visible light (2021) (8)
Assessment of equivalent substrate stiffness and mechanical properties of sustainable alkali-activated concrete containing recycled concrete aggregate (2022) (8)
Microstructure and phase characterizations of fly ash cements by alkali activation (2020) (8)
Dielectric Properties of 2–2 PMN-PT/Cement Composites (2012) (8)
Preparation of Zeolite Nanocrystals via Hydrothermal and Solvothermal Synthesis Using of Rice Husk Ash and Metakaolin (2016) (8)
Thermal behaviour of concrete sandwich panels incorporating phase change material (2020) (8)
Mechanical properties and electrical resistivity of multiwall carbon nanotubes incorporated into high calcium fly ash geopolymer (2021) (8)
TiO 2-zeolite photocatalysts made of metakaolin and rice husk ash for removal of methylene blue dye (2017) (8)
ADHESION CHARACTERIZATION OF PORTLAND CEMENT CONCRETE AND ALKALI-ACTIVATED BINDERS UNDER DIFFERENT TYPES OF CALCIUM PROMOTERS (2018) (8)
Influence of fly ash fineness on water requirement and shrinkage of blended cement mortars (2015) (8)
Solidification of heavy metal sludge using cement, fly ash and silica fume (2013) (8)
The effect of cation distribution on the magnetic properties of CoFe2O4 nanoparticles (2021) (8)
Strength and chloride penetration of Portland cement mortar containing palm oil fuel ash and ground river sand (2009) (8)
Properties of NdFeB magnetic cement (2019) (7)
Compressive Strength and Microstructure of 0–3 Lead Zirconate Titanate Ceramic-Portland Cement Composites (2013) (7)
Strength enhancement of pumice-based geopolymer paste by incorporating recycled concrete and calcined oyster shell powders (2022) (7)
High flexural strength lightweight fly ash geopolymer mortar containing waste ﬁber cement (2022) (7)
Boosting the Power Output of a Cement-Based Triboelectric Nanogenerator by Enhancing Dielectric Polarization with Highly Dispersed Carbon Black Nanoparticles toward Large-Scale Energy Harvesting from Human Footsteps (2022) (7)
In vitro surface reaction in SBF of a non-crystalline aluminosilicate (geopolymer) material (2018) (7)
Sustainable utilization of water treatment residue as a porous geopolymer for iron and manganese removals from groundwater. (2021) (7)
Engineered biochar from sugarcane leaves with slow phosphorus release kinetics (2022) (7)
Chloride penetration and corrosion resistance of ground fly ash blended cement mortar (2011) (7)
Properties of NdFeB magnetic cement (2019) (7)
Efficiency factor of high calcium Class F fly ash in concrete (2011) (7)
Dielectric and Piezoelectric Properties of 2–2 PZT-Portland Cement Composites (2013) (7)
Case study of the application of pervious fly ash geopolymer concrete for neutralization of acidic wastewater (2021) (7)
Properties of alkali activated silica fume–Al(OH)3–fluidized bed combustion fly ash composites (2015) (6)
Investigation on the Dielectric Properties of 0–3 Lead Zirconate Titanate-Geopolymer Composites (2013) (6)
Dielectric Responses and Electrical Properties of CaCu3Ti4-xVxO12 Ceramics Prepared by a Simple Poly(ethylene glycol) Sol–Gel Route (2013) (6)
Correction to: Improvement of recycled concrete aggregate using alkali-activated binder treatment (2021) (6)
The properties and durability of high-pozzolanic industrial by-products content concrete masonry blocks (2015) (6)
Improved dielectric properties of PVDF composites by employing Mg-doped La1.9Sr0.1NiO4 particles as a filler (2017) (6)
Optimizing Mix Proportion of Lightweight Concrete Containing Plastic Waste by Taguchi Method (2014) (6)
Recycled Non-Biodegradable polyethylene terephthalate waste as fine aggregate in fly ash geopolymer and cement mortars (2022) (6)
Influence of alkalinity on self-treatment process of natural fiber and properties of its geopolymeric composites (2022) (6)
Entrapment of nano-ZnO into alginate/polyvinyl alcohol beads with different crosslinking ions for fertilizer applications. (2021) (6)
Hydroxyapatite from Golden Apple Snail Shell with Calcined Kaolin for Biomaterial Applications (2016) (6)
Effect of microwave-assisted curing process on strength development and curing duration of cellular lightweight geopolymer mortar (2021) (5)
Synthesis of Faujasite and Analcime Using of Rice Husk Ash and Metakaolin (2013) (5)
Gold-Nanoparticle-Deposited TiO2 Nanorod/Poly(Vinylidene Fluoride) Composites with Enhanced Dielectric Performance (2021) (5)
Anticipating of Potential Climate and Land Use Change Impacts on Floods: A Case Study of the Lower Nam Phong River Basin (2020) (5)
Use of Recycled Concrete Aggregate in High-Calcium Fly Ash Geopolymer Concrete (2016) (5)
FLUIDIZED BED COAL-BARK FLY ASH GEOPOLYMER WITH ADDITIVES CURED AT AMBIENT TEMPERATURE (2019) (5)
Behavior of concrete cylinders confined by a ferro-geopolymer jacket in axial compression (2017) (5)
Effect of curing temperature and time on the mechanical properties of hydroxyapatite/calcined kaolin (2018) (5)
Facile fabrication of green synthesized silver-decorated magnetic particles for coating of bioactive packaging (2022) (5)
Dielectric and electrical properties of nano-Ag/C3AH6 nanocomposites (2019) (5)
Thermal insulating and fire resistance performances of geopolymer mortar containing auto glass waste as fine aggregate (2022) (5)
Significantly Enhanced Dielectric Properties of Ag-Deposited (In1/2Nb1/2)0.1Ti0.9O2/PVDF Polymer Composites (2021) (5)
Hydrophobicity and efflorescence of lightweight fly ash geopolymer incorporated with calcium stearate (2022) (5)
Alkali-activated material synthesized from palm oil fuel ash for Cu/Zn ion removal from aqueous solutions (2021) (5)
Corrosion-Induced Cracking Time in Steel Fiber-Reinforced Concrete: Experiment and Finite Element Method (2020) (5)
THERMAL ENERGY STORAGE PROPERTIES OF FORM-STABLE PARAFFIN / RECYCLE BLOCK CONCRETE COMPOSITE PHASE CHANGE MATERIAL (2016) (5)
Permeability and abrasion resistance of concretes containing high volume fine fly ash and palm oil fuel ash (2012) (5)
Effect of Addition of Microsilica and Nanoalumina on Compressive Strength and Products of High Calcium Fly Ash Geopolymer with Low Concentration NaOH (2015) (4)
DURABILITY OF CONCRETE CONTAINING RECYCLED ASPHALTIC CONCRETE AGGREGATE AND HIGH CALCIUM FLY ASH (2020) (4)
Strength, Elastic Modulus, and Creep of High-Strength Concrete Produced with Bagasse Ash and Recycled Concrete Aggregate (2019) (4)
LOng‐Term Development of Mechanical Strengths of Alkali‐Activated Metakaolin, Slag, Fly Ash, And Blends (2015) (4)
Improvement of recycled concrete aggregate using alkali-activated binder treatment (2021) (4)
Influence of portland cement replacement in high calcium fly ash geopolymer paste (2014) (4)
Thermal Degradation and Fire Retrandancy of Wood Impregnated with Nitrogen Phosphorus Flame Retardant (2014) (4)
Influence of Glass and Limestone Powders in High Calcium Fly Ash Geopolymer Paste on Compressive Strength and Microstructure (2019) (4)
Effect of synthetic microfiber and viscosity modifier agent on layer deformation, viscosity, and open time of cement mortar for 3D printing application (2022) (4)
Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer (2012) (4)
The Role of SiO2 and Al2O3 on the Properties of Geopolymers with and without Calcium (2013) (4)
Impacts of urban transit system development on modal shift and greenhouse gas (GHG) emission reduction: A Khon Kaen, Thailand case study (2018) (4)
Carbon fiber/epoxy vitrimer composite patch cured with bio‐based curing agents for one‐step repair metallic sheet and its recyclability (2021) (4)
Dense-Graded Hot Mix Asphalt with 100% Recycled Concrete Aggregate Based on Thermal-Mechanical Surface Treatment (2021) (4)
Characterization of TiO2-activated carbon onto adsorption and photocatalytic properties and its application (2020) (4)
Dielectric Responses and Electrical Properties of CaCu (2013) (3)
Experimental and Modeling Studies on Thermal Conductivity of Cement Composites Containing Nanosilica (2014) (3)
Controllability, antiproliferative activity, Ag+ release, and flow behavior of silver nanoparticles deposited onto cellulose nanocrystals. (2022) (3)
Candle Flame Synthesis and Electrochemical Behavior of Chain-like Carbon Nano-onions on 304 Stainless Steel (2015) (3)
Estimation of modulus of elasticity of compacted loess soil and lateritic-loess soil from laboratory plate bearing test (2022) (3)
Fluoride Adsorption Enhancement of Calcined-Kaolin/Hydroxyapatite composite (2022) (3)
Dielectric Properties of 0–3BCTZO/High Calcium Fly Ash Geopolymer Composites (2015) (3)
HIGH CALCIUM FLY ASH GEOPOLYMER CONTAINING NATURAL RUBBER LATEX AS ADDITIVE (2020) (3)
Ohmic heating as an effective path to rapidly cure and strengthen alkali activated material (2022) (3)
Role of Fly Ash on Strength Properties of Rejuvenated Soil Cement for Pavement Materials (2021) (3)
Study of Leaching of Lignite Fly Ash and Strength of Fly Ash Based-Geopolymer (2006) (3)
Corrigendum to “Curing kinetic, thermal and adhesive properties of epoxy resin cured with cashew nut shell liquid” [TCA, 600C (2014) Page 20–27] (2015) (3)
Influences of the Ratios of High-Calcium Fly Ash to Low-Calcium Fly Ash on the Strength and Drying Shrinkage of Geopolymer Mortar (2014) (3)
Geopolymer from Mae Moh Fly Ash (2013) (3)
A Study of Chloride Penetration of Concrete Containing Classified Fly Ash (2006) (3)
Strength and Chloride Penetration of Mortar with Mixture Proportioning in Ternary Cementitious System (2008) (3)
Dielectric, ferroelectric, and piezoelectric properties of lead-free Ba0.95Ca0.05Ti1-xZrxO3 ceramics (2019) (3)
Alternative Cementitious Materials and Their Composites (2018) (3)
Preliminary Investigation of Crushed Rock-Based Geopolymer for Road Applications (2020) (2)
The fabrication of calcium silicate-natural rubber composite for mechanical energy harvesting (2021) (2)
Electrophoretic Deposition of Carbon Nanotubes onto Zinc Substrates for Electrode Applications (2020) (2)
Use of Cement and Bottom Ash in Deep Mixing Application for Stabilization of Soft Bangkok Clay (2022) (2)
Investigation of Gamma Radiation Shielding of Concrete Containing Blast Furnace Slag Waste via Experimental and Calculation Methods (2018) (2)
Effect of Porosity and Pore Size on Microstructures and Mechanical Properties of Metakaolin Blended with Ca(OH)2 and PLA as Porous Geopolymers (2016) (2)
A DFT study on electrocatalytic performance of 12CaO•7Al2O3 (C12A7) with electrolytic LiI applied in DSSCs (2021) (2)
A Study Microstructure of Blended Cement Paste Containing Palm Oil Fuel Ash (2012) (2)
Probabilistic Seismic Hazard Assessment of North-Eastern Thailand (2020) (2)
Bottom ash stabilized with cement and para rubber latex for road base applications (2022) (2)
Synthesis and phosphate adsorption performance of elephant dung biochar modified with magnesium and iron (2022) (2)
Tailoring the phosphorus release from biochar-based fertilizers: role of magnesium or calcium addition during co-pyrolysis (2022) (2)
Nanotechnology in Eco-efficient Construction: Materials, Processes and Applications, 2nd Edition (2019) (2)
Influence of Nano-Silica Dosage on Properties of Cement Paste Incorporating with High Calcium Fly Ash (2020) (2)
Corrigendum to "High calcium fly ash geopolymer stabilized lateritic soil and granulated blast furnace slag blends as a pavement base material" [J. Hazard. Mater. 341 (2018) 257-267]. (2021) (2)
Residual Strength of Blended Cement Pastes and Mortar Exposed to Elevated Temperatures (2017) (2)
Effect of Fly Ash Fineness on Compressive Strength, Total Pore Volume and Pore Size of Blended Cement Paste (2005) (2)
Properties of Geopolymer Paste from Fly Ash Blended with Metakaolin as Pervious Concrete (2016) (2)
Engineering properties of marginal lateritic soil stabilized with one-part high calcium fly ash geopolymer as pavement materials (2022) (2)
Influence of Fineness of High Calcium Fly ash on Properties of Geopolymer Paste (2013) (2)
Crushed Rock Geopolymer as a Future Road Construction Material: An Evaluation on Strength Performance and Compaction Characteristics (2020) (2)
FACTORS AFFECTING THE WORKABILITY AND STRENGTH OF ALKALI-ACTIVATED HIGH CALCIUM FLY ASH CONCRETE (2012) (1)
Durability Performance of Alkali‐Activated Metakaolin, Slag, Fly Ash, and Hybrids (2017) (1)
Fire resistance of recycled aggregate alkali-activated concrete (2022) (1)
Artificial intelligence (AI) vs. human in hip fracture detection (2022) (1)
Sulfate and Sulfuric Resistance of Fly Ash Geopolymer (2012) (1)
EFFECT OF SODIUM HYDROXIDE CONCENTRATION AND SODIUM SILICATE TO SODIUM HYDROXIDE RATIO ON PROPERTIES OF CALCINED KAOLIN-WHITE PORTLAND CEMENT GEOPOLYMER (2018) (1)
Strength and Behaviour of Small-Scale Reinforced High Calcium Fly Ash Geopolymer Concrete Beam with Short Shear Span (2016) (1)
Calcined Ranong Kaolin Geopolymer Mortar (2012) (1)
Effect of synthesis temperature on the magneto-electrochemical properties of LaFe0.9Co0.1O3 nanoparticles (2017) (1)
Development of Biodegradable Films with Antioxidant Activity Using Pectin Extracted from Cissampelos pareira Leaves (2021) (1)
DEVELOPMENT OF COMPOSITE ELECTRODES CONTAINING GEOPOLYMER BINDER FOR ELECTROCHEMICAL APPLICATIONS (2018) (1)
Effect of High-Speed Mixing on Properties of High Calcium Fly Ash Geopolymer Paste (2014) (1)
Self-cleaning superhydrophobic fly ash geopolymer (2023) (1)
Optimization of Printing Parameters for Printing of Ordinary Portland Cement using a Custom-made 3D Printer (2022) (1)
Effect of surfactants on the distribution of natural rubber latex in cement and geopolymer composites based on X-ray computed tomography (2022) (1)
Characterization of TiO 2 -activated carbon onto adsorption and photocatalytic properties and its application (2020) (1)
Dielectric and Mechanical Properties of CTAB-Modified Natural Rubber Latex–Cement Composites (2022) (1)
Eco-production of silica from sugarcane bagasse ash for use as a photochromic pigment filler (2020) (1)
A Comparative Study on Properties of Geopolymeric Material from Coal Ash (2008) (1)
Strength and Bioactivity of Hydroxyapatite/White Portland Cement (HAp/WPC) under Simulated Body Fluid (SBF) Solution (2020) (1)
Thermal Activation on Phase Formation of Alkaline Activated Kaolin Based System (2013) (1)
The Study of Physical and Thermal Conductivity Properties of Cement Paste Containing Nanosilica (2015) (1)
Effect of Polypropylene Fiber on the Flexural Strength Properties of Lightweight Foam Mixed Soil (2019) (1)
Estimation of Sugar Content in Sugarcane (Saccharum spp.) Variety Lumpang 92-11 (LK 92-11) and Khon Kaen 3 (KK 3) by Near Infrared Spectroscopy (2021) (1)
Influence of Sodium Hydroxide Grade on the Strength of Fly Ash-Based Geopolymer Cement (2020) (1)
BENDING, BUCKLING AND FREE VIBRATION ANALYSES OF NANOBEAM-SUBSTRATE MEDIUM SYSTEMS (2022) (1)
Strength and water permeability of concrete containing various types of fly ashes and filler material (2012) (1)
Hydration and Physico-mechanical Properties of Blended Calcium Sulfoaluminate-belite Cement Made of Industrial By-products (2016) (1)
Factors of FGD-gypsum Replacement and Alkaline Solution Ratio on Compressive Strength and Microstructure of Fly Ash Geopolymer (2021) (1)
Flexibility-based stress-driven nonlocal frame element: formulation and applications (2022) (1)
Novel electromagnetic induction heat curing process of fly ash geopolymer using waste iron powder as a conductive material (2022) (1)
Effect of Portland Cement Content on Compressive Strength and Elastic Modulus of High-Calcium Fly Ash Geopolymer Mortar Containing Various Type of Alkali Solution (2020) (0)
Pre-Crack Behaviours of Cement Paste Containing Bacillus pseudofirmus ATCC 700159 (2019) (0)
Finding Optimized Conditions for 3D Printed High Calcium Fly Ash Based Alkali-Activated Mortar (2023) (0)
A MODEL FOR PREDICTION OF ANISOTROPIC BEHAVIOR OF SOFT TISSUES UNDER LOADING (2013) (0)
The innovation of cellular lightweight concrete with waste materials (2015) (0)
Creep and hygral volume change of high strength concrete: summary (1977) (0)
Properties of Mortar Incorporating Fiber Cement Roof Tile Waste Fine Aggregate (2021) (0)
Mechanical and Thermal Properties of Recycling Lightweight Pervious Concrete (2014) (0)
Compressive strength, Bending and Fracture Characteristics of High Calcium Fly Ash Geopolymer Mortar Containing Portland Cement Cured at Ambient Temperature (2015) (0)
Nanotechnology in Eco-efficient Construction: Materials, Processes and Applications, 2nd Edition (2019) (0)
Physical Properties of Cement Mortar Containing Waste Ash (2015) (0)
Enhancement of Porosity and Strength of Clay Brick Fired at Reduced Temperature with the Aid of Corn Cob and Waste Glass (2023) (0)
Development of alkali activated crushed rock for environmentally sustainable roadway rehabilitation (2021) (0)
Influence of Sand to Binder Ratio on Properties of Geopolymer Mortar Containing Portland Cement (2016) (0)
Mechanical Properties of High-calcium Fly Ash Geopolymer with Nano-SiO2 Particle Sizes (2020) (0)
Effects of delay time and curing temperature on compressive strength and porosity of ground bottom ash geopolymer mortar (2021) (0)
Structural Lightweight Concrete Containing Recycled Lightweight Concrete Aggregate (2017) (0)
Investigation of the magnetic and mechanical performance of fly ash Geopolymer/BaFe12O19 nanocomposites (2023) (0)
Development of high performance concrete containing high calcium fly ash (2016) (0)
Properties of Pervious Geopolymer Concrete Made from High-calcium Fly Ash Containing Calcium Carbide Residue (2020) (0)
Properties of alkali activated silica fume–Al(OH)3–fluidized bed combustion fly ash composites (2014) (0)
The innovation of rice husk-bark ash on green lightweight concrete (2020) (0)
Effect of sodium hydroxide and sodium silicate solutions on strengths of alkali activated high calcium fly ash containing Portland cement (2016) (0)
Correction to: Improvement of recycled concrete aggregate using alkali-activated binder treatment (2022) (0)
Porosity enhancement of activated carbon by hydrolyzed lignin from black liquor (2022) (0)
Durability properties of novel coating material produced by alkali-activated/cement powder (2023) (0)
Use of viscoelastic polymer sheet as an acoustic control treatment in ceramic tiles to improve sound insertion loss (2023) (0)
Investigation on preservation and repairs of the Sukhothai-Ayutthaya Ruins (World Cultural Heritage Site) in Thailand (2007) (0)
The Development of rice husk ash and fly ash to replace portland cement in high-strength concrete work (2020) (0)
Use of paraffin impregnated lightweight aggregates to improve thermal properties of concrete panels (2015) (0)
The Water-Repellent Ability of Road Pavement Material Stabilized with Synthetic and Natural Polymers (2021) (0)
Influence of Recycled Glass on Strength Development of Alkali-Activated High-Calcium Fly Ash Mortar (2023) (0)
Abrasion and sulfuric acid resistance of floor concrete polishing (2023) (0)
Enhancing the properties of fly ash-based geopolymer concrete using recycled aggregate from waste ceramic electrical insulator (2023) (0)
Investigation of properties of lightweight concrete with calcined diatomite aggregate (2014) (0)
Use of phase change material to improve thermal properties of lightweight geopolymer panel (2016) (0)
The Effect of Graphene Oxide in Bond Strength between Synthetic Fibers and Cement Mortar (2022) (0)
Effects of Sulfate Attack Under Wet and Dry Cycles on Strength and Durability of Cement-Stabilized Laterite (2023) (0)
Significantly improved non-ohmic and giant dielectric response in CaCu3Ti4O12 ceramics by incorporating Portland cement (2020) (0)
Preliminary Study of Pressed Lightweight Geopolymer Block Using Fly Ash, Portland Cement and Recycled Lightweight Concrete (2016) (0)
The Effect of Fuel Type on Temperature Profile within Pilot-Scale Downdraft-Gasifier for the LPG Replacement in Electricity Production (2014) (0)
Effect of Oil Palm Fiber Content on the Physical and Mechanical Properties and Microstructure of High-Calcium Fly Ash Geopolymer Paste (2018) (0)
Prediction of Compaction Parameters of Khon Kaen Loess Soil (2020) (0)
Performance of Geopolymer Mortar Containing PVC Plastic Waste from Bottle Labels at Normal and Elevated Temperatures (2023) (0)
Mechanical Properties, Thermal Conductivity, and Sound Absorption of Pervious Concrete Containing Recycled Concrete and Bottom Ash Aggregates (2018) (0)
THE EFFECT OF ZEOLITE ON MICROSTRUCTURE OF BLENDED CEMENT PASTE (2008) (0)
Thanks to 2010 Reviewers (2011) (0)
Strength and chloride resistance of the blended Portland cement mortar containing rice husk ash and ground river sand (2014) (0)
Flexural strengthening of RC beams using sisal fibre reinforced polymer (SFRP) composite with anchorage systems (2023) (0)
Investigation on Thermal Stability of Geopolymer Based Zeolite in Fire Case Study (2020) (0)
Residual flexural behavior of fiber reinforced concrete after heating (2018) (0)
Investigation of hard-burn and soft-burn lime kiln dust as alternative materials for alkali-activated binder cured at ambient temperature (2020) (0)
Effects of Surface Hydrophobicity on Functionalization of Oleic Acid on Bombyx mori Silkworm Cocoons (2016) (0)
Development of Thai Lignite Fly Ash and Metakaolin for Pervious Geopolymer Concrete (2018) (0)
Effects of added carbon black on synthesis and characterization of calcium aluminate electride (2020) (0)
Applications of environmental friendly concrete in Thailand (2016) (0)
Research on green porous concrete (2020) (0)
Bioconversion of Saccharum officinarum Leaves for Ethanol Production Using Separate Hydrolysis and Fermentation Processes (2017) (0)
Crushed Rock Geopolymer as a Future Road Construction Material: An Evaluation of Compaction and Strength Characteristics (2021) (0)
Probabilistic Seismic Hazard Assessment of North-Eastern Thailand (2020) (0)
Use of ternary blend of Portland cement and two pozzolans to improve durability of high-strength concrete (2014) (0)
Sustainable utilisation of water treatment residue as a porous geopolymer for iron removal from groundwater (2021) (0)
Fabrication of Hydrogel-Nano Silver Based on Aloe vera/Carboxymethyl Cellulose/Tannic Acid for Antibacterial and pH-Responsive Applications (2022) (0)
The development of bottom ash as an aggregate in concrete work (2015) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Prinya Chindaprasirt?

Prinya Chindaprasirt is affiliated with the following schools:

Nagaoka University of Technology
Chulalongkorn University
Khon Kaen University
Mahasarakham University
Stanford University

Prinya Chindaprasirt's Academic­Influence.com Rankings

Prinya Chindaprasirt's Degrees

Why Is Prinya Chindaprasirt Influential?

Prinya Chindaprasirt's Published Works

Published Works

What Schools Are Affiliated With Prinya Chindaprasirt?

Prinya Chindaprasirt's AcademicInfluence.com Rankings