Reinhard Pippan

Q: What Schools Are Affiliated With Reinhard Pippan

Reinhard Pippan is affiliated with the following schools: University of Leoben, University of California, Berkeley, ETH Zurich, Stanford University, Technical University of Munich, University of Vienna

Reinhard Pippan's AcademicInfluence.com Rankings

Reinhard Pippan

Physics

#4759

World Rank

#6481

Historical Rank

physics Degrees

Download Badge

Physics

Reinhard Pippan's Degrees

PhD Physics University of Vienna
Masters Physics University of Vienna
Bachelors Physics University of Vienna

Why Is Reinhard Pippan Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Reinhard Pippan's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation (2015) (825)
Recent progress in research on tungsten materials for nuclear fusion applications in Europe (2013) (588)
A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples (2008) (448)
Saturation of Fragmentation During Severe Plastic Deformation (2010) (422)
On the homogeneity of deformation by high pressure torsion (2004) (379)
Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique (2005) (292)
Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials (2013) (264)
A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films (2009) (213)
Development of advanced high heat flux and plasma-facing materials (2017) (196)
Effect of rhenium on the dislocation core structure in tungsten. (2010) (195)
Structural refinement of low alloyed steels during severe plastic deformation (2004) (193)
The Limits of Refinement by Severe Plastic Deformation (2006) (189)
Fatigue crack closure: a review of the physical phenomena (2017) (188)
Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials (2010) (167)
About the fatigue crack propagation threshold of metals as a design criterion – A review (2016) (163)
Fracture toughness investigations of tungsten alloys and SPD tungsten alloys (2007) (161)
Review on the EFDA programme on tungsten materials technology and science (2011) (160)
Fracture Toughness of Polycrystalline Tungsten Alloys (2010) (153)
Technical parameters affecting grain refinement by high pressure torsion (2009) (153)
Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens (2012) (149)
Three-dimensional finite element simulation of a polycrystalline copper specimen (2007) (143)
Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness (2005) (141)
The formation of supersaturated solid solutions in Fe–Cu alloys deformed by high-pressure torsion (2012) (139)
Nanostructure and properties of a Cu–Cr composite processed by severe plastic deformation (2008) (132)
Nanostructured metals under irradiation (2009) (124)
Advantages and Limitations of HPT: A Review (2008) (114)
Modified NASGRO equation for physically short cracks (2014) (114)
DEFORMATION BEHAVIOUR OF CLOSED-CELL ALUMINIUM FOAMS IN TENSION (2001) (105)
THE GROWTH OF SHORT CRACKS UNDER CYCLIC COMPRESSION (1987) (104)
Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion (2010) (103)
Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes (2018) (102)
Fatigue crack propagation behavior in the vicinity of an interface between materials with different yield stresses (2000) (101)
Ab initio calculations of grain boundaries in bcc metals (2016) (101)
Significance of temperature increase in processing by high-pressure torsion (2011) (101)
Dislocation-core symmetry and slip planes in tungsten alloys: Ab initio calculations and microcantilever bending experiments (2012) (98)
TEM investigations of the structural evolution in a pearlitic steel deformed by high-pressure torsion (2006) (96)
Fracture behaviour of tungsten–vanadium and tungsten–tantalum alloys and composites (2011) (96)
Strain hardening during high pressure torsion deformation (2005) (95)
Formation of a W¿25%Cu nanocomposite during high pressure torsion (2005) (94)
In situ atomic-scale observation of oxidation and decomposition processes in nanocrystalline alloys (2018) (94)
Cyclic response of copper single crystal micro-beams (2010) (92)
Changes in the mechanical properties of a pearlitic steel due to large shear deformation (2007) (91)
RCF and wear in theory and practice—The influence of rail grade on wear and RCF (2011) (89)
Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion (2011) (89)
Ab initio search for cohesion-enhancing impurity elements at grain boundaries in molybdenum and tungsten (2016) (88)
Deformation‐Induced Supersaturation in Immiscible Material Systems during High‐Pressure Torsion (2017) (85)
Influence of impurities on the fracture behaviour of tungsten (2011) (84)
Determination of the length dependence of the threshold for fatigue crack propagation (2002) (84)
Microstructural evolution of the deformed volume beneath microindents in tungsten and copper (2006) (83)
The importance of fracture toughness in ultrafine and nanocrystalline bulk materials (2016) (82)
Nanomaterials by severe plastic deformation: review of historical developments and recent advances (2022) (82)
Microstructural investigation of the volume beneath nanoindentations in copper (2007) (81)
The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation (2017) (79)
Influence of loading frequency on the high cycle fatigue properties of AlZnMgCu1.5 aluminium alloy (2001) (79)
On the mechanism of fatigue crack propagation in ductile metallic materials (2011) (78)
Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary? (2015) (78)
Fracture toughness evaluation of ultrafine-grained nickel (2011) (77)
Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel (2011) (76)
Effect of single overloads in ductile metals: A reconsideration (2007) (76)
Ab initio description of segregation and cohesion of grain boundaries in W–25 at.% Re alloys (2015) (75)
High temperature mechanical properties of WC–Co hard metals (2016) (75)
The use of fatigue specimens precracked in compression for measuring threshold values and crack growth (1994) (74)
High temperature fracture experiments on tungsten-rhenium alloys (2010) (74)
Fracture and fracture toughness of nanopolycrystalline metals produced by severe plastic deformation (2015) (74)
On the Onset of a Steady State in Body-Centered Cubic Iron during Severe Plastic Deformation at Low Homologous Temperatures (2008) (74)
A brief summary of the progress on the EFDA tungsten materials program (2013) (72)
New procedure to generate stable nanocrystallites by severe plastic deformation (2009) (72)
Evolution of misorientation distribution during warm ‘abc’ forging of commercial-purity titanium (2006) (69)
Cyclic high-pressure torsion of nickel and Armco iron (2006) (68)
Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel (2016) (68)
Investigation of fracture properties of magnetron-sputtered TiN films by means of a FIB-based cantilever bending technique (2009) (68)
Absolute concentration of free volume-type defects in ultrafine-grained Fe prepared by high-pressure torsion (2010) (67)
Dislocation emission and fatigue crack growth threshold (1991) (66)
Near-threshold behaviour of shear-mode fatigue cracks in metallic materials (2014) (66)
Fracture mechanics of micro samples: Fundamental considerations (2018) (66)
Anisotropic fracture behavior of ultrafine-grained iron (2010) (65)
Effect of microstructure on fatigue properties of WC-Co hard metals (2010) (65)
Bulk Nanostructured Functional Materials By Severe Plastic Deformation (2010) (65)
Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium (2010) (64)
The cyclic R-curve – Determination, problems, limitations and application (2017) (63)
Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel (2004) (63)
Structural materials for DEMO: The EU development, strategy, testing and modelling (2007) (62)
Homogeneous Cu–Fe supersaturated solid solutions prepared by severe plastic deformation (2010) (62)
Effect of specimen size on the tensile strength of WC–Co hard metal (2011) (61)
An argument for a cycle-by-cycle propagation of fatigue cracks atsmall stress intensity ranges (1998) (61)
Threshold and effective threshold of fatigue crack propagation in ARMCO iron. I, The influence of grain size and cold working (1991) (61)
New insights on the formation of supersaturated solid solutions in the Cu–Cr system deformed by high-pressure torsion (2014) (60)
Work hardening and microstructure of AlMg5 after severe plastic deformation by cyclic extrusion and compression (2003) (59)
Dislocation modelling of fatigue cracks: an overview (2001) (58)
Fracture behaviour and fracture toughness of ductile closed-cell metallic foams (2002) (56)
The influence of crack length on fatigue crack growth in deep sharp notches (1987) (56)
Direct experimental determination of grain boundary excess volume in metals. (2012) (55)
Nanoscaled structure of a Cu–Fe composite processed by high-pressure torsion (2005) (55)
Overview on established and novel FIB based miniaturized mechanical testing using in-situ SEM (2009) (55)
A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale (2007) (55)
Thermally activated deformation processes in body-centered cubic Cr – How microstructure influences strain-rate sensitivity (2015) (53)
Homogenization of metal matrix composites by high-pressure torsion (2005) (51)
Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms (2013) (51)
Fatigue crack closure: from LCF to small scale yielding (2011) (49)
Fatigue crack propagation in cellular metals (2005) (49)
Indentation across size scales : A survey of indentation-induced plastic zones in copper {111} single crystals (2008) (49)
Direct evidence for grain boundary motion as the dominant restoration mechanism in the steady-state regime of extremely cold-rolled copper (2014) (49)
Grain boundary excess volume and defect annealing of copper after high-pressure torsion (2014) (48)
Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes (2008) (47)
Characteristic features of microstructure of ALMg5 deformed to large plastic strains (2001) (47)
Asymmetric crack wake plasticity – a reason for roughness induced crack closure (2004) (46)
Modified Kitagawa–Takahashi diagram accounting for finite notch depths (2015) (45)
Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel (2011) (44)
Microstructure and metallic ion release of pure titanium and Ti–13Nb–13Zr alloy processed by high pressure torsion (2016) (43)
Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility (2019) (43)
Can pure mode III fatigue loading contribute to crack propagation in metallic materials (2008) (42)
Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures (2014) (42)
Structural refinement of chromium by severe plastic deformation (2003) (42)
Strain effects on the coarsening and softening of electrodeposited nanocrystalline Ni subjected to high pressure torsion (2008) (41)
Tungsten (W) Laminate Pipes for Innovative High Temperature Energy Conversion Systems (2015) (41)
Enhancement of strength and stability of nanostructured Ni by small amounts of solutes (2011) (41)
Evaluation of mechanical behavior of nano-grained 2024 Al alloy during high pressure torsion (HPT) process at various temperatures (2012) (41)
Microtexture analysis of restoration mechanisms during high pressure torsion of pure nickel (2017) (41)
The ductile to brittle transition of ultrafine-grained Armco iron: an experimental study (2010) (40)
Discrete dislocation simulation of nanoindentation: Indentation size effect and the influence of slip band orientation (2007) (40)
The effective threshold of fatigue crack propagation in aluminium alloys. I. The influence of yield stress and chemical composition (1998) (40)
Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour (2016) (39)
Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments (2017) (39)
Multiscale Modelling of Plasticity and Fracture by Means of Dislocation Mechanics (2010) (39)
Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation (2019) (38)
Influence of grain size on orientation changes during plastic deformation (2008) (37)
Effect of oxide particles on the stabilization and final microstructure in aluminium (2011) (37)
Influence of grain shape and orientation on the mechanical properties of high pressure torsion deformed nickel (2013) (37)
A comparison of a discrete dislocation model and a continuous description of cyclic crack tip plasticity (1997) (37)
Controlling the distribution of structural heterogeneities in severely deformed metallic glass (2019) (36)
Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation (2010) (36)
Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions (2019) (36)
Investigation of the fatigue behavior of Al thin films with different microstructure (2010) (35)
High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties (2019) (35)
A comparison of different methods to determine the threshold of fatigue crack propagation (1994) (35)
Evolution of residual stress and damage in coated hard metal milling inserts over the complete tool life (2014) (35)
A comprehensive study on the damage tolerance of ultrafine-grained copper (2012) (35)
A NEW POWERFUL TOOL FOR SURVEYING CLEAVAGE FRACTURE SURFACES (1997) (34)
High-pressure torsion applied to nickel single crystals (2008) (34)
Revisiting fatigue crack growth in various grain size regimes of Ni (2015) (34)
Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel (2013) (33)
Damage evolution during cyclic tension–tension loading of micron-sized Cu lines (2014) (33)
Fatigue of bimaterials. Investigation of the plastic mismatch in case of cracks perpendicular to the interface (1998) (33)
Influence of processing temperature on microstructural and mechanical properties of high-alloyed single-phase steels subjected to severe plastic deformation (2005) (33)
Rate limiting deformation mechanisms of bcc metals in confined volumes (2019) (32)
Benefits of pattern formation by severe plastic deformation (2019) (32)
Importance of dislocations pile-ups on the mechanical properties and the Bauschinger effect in micro cantilevers (2015) (32)
Near-threshold propagation of mode II and mode III fatigue cracks in ferrite and austenite (2013) (32)
Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape (2004) (32)
Damage tolerance of railway axles – The issue of transferability revisited (2016) (31)
Some comments on surface cracks in rails (2006) (31)
Cyclic crack growth in elastic plastic solids: a description in terms of dislocation theory (1997) (31)
CRACK CLOSURE: A CONCEPT OF FATIGUE CRACK GROWTH UNDER EXAMINATION (1997) (31)
Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy (2020) (31)
Impact of d -band filling on the dislocation properties of bcc transition metals: The case of tantalum-tungsten alloys investigated by density-functional theory (2017) (30)
In situ probing of fast defect annealing in Cu and Ni with a high-intensity positron beam. (2010) (30)
Hydrogen Trapping in bcc Iron (2020) (30)
Characterization of tungsten fragmentation in a W-25%Cu composite after high-pressure torsion (2007) (30)
Stereophotogrammetric investigation of overload and cyclic fatigue fracture surface morphologies in a Zr-Ti-Ni-Cu-Be bulk metallic glass (2000) (30)
Nanocrystalline steel obtained by mechanical alloying of iron and graphite subsequently compacted by high-pressure torsion (2015) (29)
Influence of external and internal length scale on the flow stress of copper (2007) (29)
Discrete dislocation simulation of nanoindentation (2004) (29)
The J-integral at Dugdale cracks perpendicular to interfaces of materials with dissimilar yield stresses (2000) (29)
High Pressure Torsion of Rail Steels (2006) (29)
Fatigue threshold and crack propagation in γ-TiAl sheets (2001) (29)
Deformation mechanisms during severe plastic deformation of a CuAg composite (2017) (29)
Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys (2019) (29)
Post-shear deformation of high pressure torsion-deformed nickel under hydrostatic pressure (2007) (29)
Analysis of roughness-induced crack closure based on asymmetric crack-wake plasticity and size ratio effect (2007) (29)
Straightforward comparison of fatigue crack growth under modes II and III (2008) (28)
The condition for the cyclic plastic deformation of the crack tip: the influence of dislocation obstacles (1992) (28)
Crystal orientation changes: A comparison between a crystal plasticity finite element study and experimental results (2012) (28)
Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations (2016) (28)
Disorientations as a function of distance: a new procedure to analyze local orientation data (2003) (27)
Characteristics of an optimized active metal cast joint between copper and C/C (2007) (27)
Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation (2015) (27)
Impact of solute-solute interactions on grain boundary segregation and cohesion in molybdenum (2018) (27)
Micrometer‐Sized Specimen Preparation Based on Ion Slicing Technique (2010) (26)
Discrete dislocation modelling of near threshold fatigue crack propagation (2010) (26)
Resistance curves for the threshold of fatigue crack propagation (2013) (26)
A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD (2011) (26)
Hydrogen-enhanced decohesion mechanism of the special Σ5(0 1 2)[1 0 0] grain boundary in Ni with Mo and C solutes (2019) (25)
On the phase evolution and dissolution process in Cu-Cr alloys deformed by high pressure torsion (2017) (25)
Non‐propagation conditions for fatigue cracks and fatigue in the very high‐cycle regime (2002) (24)
Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy (2017) (24)
Production of Bulk Metallic Glasses by Severe Plastic Deformation (2015) (24)
Recrystallization kinetics of ultrafine-grained Ni studied by dilatometry (2011) (24)
Fatigue crack growth anisotropy in ultrafine-grained iron (2017) (23)
Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion (2019) (23)
The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part I - Microstructural characterization (2018) (23)
Stacking fault energy and indentation size effect: Do they interact? (2008) (22)
Plastic deformation at short edge cracks under fatigue loading (2000) (22)
Development of a New Testing Procedure for Performing Tensile Tests on Specimens with Sub-Millimetre Dimensions (2013) (22)
New testing procedure to determine da/dN–ΔK curves at different, constant R-values using one single specimen (2007) (21)
Consideration of the mechanical behaviour of small fatigue cracks (2002) (21)
Analysis of fatigue crack propagation under mixed mode II + III in ARMCO iron (2015) (21)
Generation of extreme grain aspect ratios in severely deformed tantalum at elevated temperatures (2017) (21)
Three-dimensional morphology of fracture surfaces generated by modes II and III fatigue loading in ferrite and austenite (2013) (20)
A study into the crack propagation resistance of pure tungsten (2013) (20)
Thermally Activated Deformation Behavior of ufg-Au: Environmental Issues During Long-Term and High-Temperature Nanoindentation Testing (2015) (20)
Oxide induced crack closure in the near threshold regime: The effect of oxide debris release (2018) (20)
High‐Pressure Torsion – Features and Applications (2009) (20)
Microstructures of Nickel Deformed by High Pressure Torsion to High Strains (2003) (20)
Microstructure and mechanical properties of UFG medium carbon steel processed by HPT at increased temperature (2010) (20)
Cyclic Deformation Behavior of a 316L Austenitic Stainless Steel Processed by High Pressure Torsion (2012) (20)
Rail grade dependent damage behaviour – Characteristics and damage formation hypothesis (2014) (19)
Fatigue crack growth in full-scale railway axles – Influence of secondary stresses and load sequence effects (2020) (19)
Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing (2017) (19)
Core polarity of screw dislocations in Fe–Co alloys (2014) (19)
From powders to bulk metallic glass composites (2017) (19)
Mechanism of cementite decomposition in 100Cr6 bearing steels during high pressure torsion (2020) (19)
Where are the geometrically necessary dislocations accommodating small imprints (2009) (18)
Influence of stacking fault energy and alloying on stage V hardening of HPT-deformed materials (2010) (18)
A new cantilever technique reveals spatial distributions of residual stresses in near-surface structures (2008) (18)
Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel (2018) (18)
On the energy balance of fatigue crack growth (1992) (18)
The length and the shape of cracks under cyclic compression: The influence of notch geometry (1988) (18)
Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies (2018) (18)
Investigation of a growing fatigue crack by means of a discrete dislocation model (1997) (18)
Activation volume and energy of bulk metallic glasses determined by nanoindentation (2018) (18)
Formation of nanostructure and abnormal annealing behavior of a Cu–Ag–Zr alloy processed by high-pressuretorsion (2013) (18)
The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part II – Fracture properties (2018) (18)
Deformation Behavior and Microstructural Evolution of Cu–Ag Alloys Processed by High‐Pressure Torsion (2015) (18)
Effect of grain size in compression deformation on the microstructural evolution of an austenitic stainless steel (2012) (18)
Free volumes in bulk nanocrystalline metals studied by the complementary techniques of positron annihilation and dilatometry (2012) (17)
The effect of single overloads in tension and compression on the fatigue crack propagation behaviour of short cracks (2016) (17)
Hydrogen-enhanced intergranular failure of sulfur-doped nickel grain boundary: In situ electrochemical micro-cantilever bending vs. DFT (2020) (17)
Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio (2020) (17)
A MECHANISM FOR PLASTICITY‐INDUCED CRACK CLOSURE UNDER PLANE STRAIN CONDITIONS (1994) (17)
Short cracks initiated in Al 6013-T6 with the focused ion beam (FIB)-technology (2007) (17)
Improved fracture behavior and microstructural characterization of thin tungsten foils (2016) (17)
Stress measurement in thin films with the ion beam layer removal method: Influence of experimental errors and parameters (2008) (17)
The Influence of Irregularities in the Crack Shape on the Crack Extension Measurement by Means of the Direct-Current-Potential-Drop Method (1999) (17)
Effect of alloying elements on hydrogen enhanced decohesion in bcc iron (2021) (16)
Experimental evidence of a common local mode II growth mechanism of fatigue cracks loaded in modes II, III and II + III in niobium and titanium (2016) (16)
The crack driving force for fatigue crack propagation (1993) (16)
Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys (2018) (16)
Overloads in ductile and brittle materials (2005) (16)
Discussion of “Reconsideration of error in the analysis of the wake dislocation problem” (1999) (15)
The effect of severe grain refinement on the damage tolerance of a superelastic NiTi shape memory alloy. (2017) (15)
The sensitivity to measure crack closure with strain gauges near the crack tip (1988) (15)
Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds (2019) (15)
Comparison of two methods to measure crack closure in ultra-high vacuum (1989) (15)
Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study (2021) (15)
Magnetic Binary Supersaturated Solid Solutions Processed by Severe Plastic Deformation (2018) (15)
Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing (2017) (15)
Progress in understanding of intrinsic resistance to shear-mode fatigue crack growth in metallic materials (2016) (15)
Cyclically induced grain growth within shear bands investigated in UFG Ni by cyclic high pressure torsion (2017) (15)
Revealing the Microstructural evolution in Cu-Cr nanocrystalline alloys during high pressure torsion (2017) (15)
Femtosecond laser machining for characterization of local mechanical properties of biomaterials: a case study on wood (2017) (14)
Frequency Dependence of the Coercivity of Soft Magnetic Materials (2012) (14)
Threshold and effective threshold of fatigue crack propagation in ARMCO iron II: The influence of environment (1991) (14)
Hardening by annealing: insights from different alloys (2015) (14)
Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials (2019) (14)
In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys (2017) (14)
Fracture toughness evaluation of UFG tungsten foil (2018) (14)
Electrodeposition of Fe-C Alloys from Citrate Baths: Structure, Mechanical Properties, and Thermal Stability (2018) (14)
Direct measurement of vacancy relaxation by dilatometry (2016) (14)
Electrochemical and biocompatibility examinations of high-pressure torsion processed titanium and Ti-13Nb-13Zr alloy. (2018) (13)
Hydrogen segregation near a crack tip in nickel (2021) (13)
Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition (2018) (13)
The effect of grain size on the fatigue overload behaviour of nickel (2020) (13)
HPT-Deformation of Copper and Nickel Single Crystals (2006) (13)
Influence of the Processing Parameters at High Pressure Torsion (2005) (13)
Combined Fe and O effects on microstructural evolution and strengthening in Cu–Fe nanocrystalline alloys (2020) (13)
Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations (2005) (13)
Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks (2018) (13)
Percolating porosity in ultrafine grained copper processed by High Pressure Torsion (2013) (12)
Local and global fracture toughness of a flame sprayed molybdenum coating (2003) (12)
Crack path identification in a nanostructured pearlitic steel using atom probe tomography (2018) (12)
Methods to determine the joint strength of C/C to copper joints (2007) (12)
Verification of the generalised chemical potential for stress-driven hydrogen diffusion in nickel (2020) (12)
Fatigue crack propagation in threshold regime under residual stresses (2010) (12)
Microstructure and Thermal Stability of Tungsten Based Materials Processed by Means of Severe Plastic Deformation (2003) (12)
A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear – first experimental results (2014) (12)
The fracture resistance of a ferritic-austenitic duplex steel (1996) (12)
Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al–3wt.%Cu alloy (2014) (11)
Direct Observation of the Residual Plastic Deformation Caused by a Single Tensile Overload (1999) (11)
Hardening and Softening Behavior by Cyclic High-Pressure Torsion (2009) (11)
Extrinsic and intrinsic fracture behavior of high pressure torsion deformed nickel (2012) (11)
Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel (2017) (11)
Advanced β-Solidifying Titanium Aluminides – Development Status and Perspectives (2013) (11)
Verification of a continuum mechanical explanation of plasticity-induced crack closure under plain strain conditions by means of finite element analysis (2012) (11)
Chromium—a material for fusion technology (2001) (11)
Intermixing of Fe and Cu on the Atomic Scale by High-Pressure Torsion as Revealed by Dc- and Ac-Squid Susceptometry (2020) (11)
Effect of forming conditions on the softening behavior in coarse grained structures (2011) (11)
Magnetic Properties and Microstructure of a FeCo Ferritic Steel after Severe Plastic Deformation (2006) (11)
High strength nanocrystalline Cu–Co alloys with high tensile ductility (2018) (10)
On nanostructured molybdenum–copper composites produced by high-pressure torsion (2017) (10)
Approximate stress intensity factor solutions for semi-elliptical cracks with large a/W and c/B under tension and bending (2017) (10)
TEM Study of Local Disordering: A Structural Phase Change Induced by High-Pressure Torsion (2008) (10)
Discrete dislocation simulation of nanoindentation: the influence of obstacles and a limited number of dislocation sources (2005) (10)
Fracture Toughness Investigations of Severe Plastic Deformed Tungsten Alloys (2006) (10)
About application of three dimensional analyses of fracture surfaces in fracture study on nanostructured titanium (2013) (10)
The effective threshold of fatigue crack propagation in aluminium alloys. II. The influence of particle reinforcement (1998) (9)
Modeling of Fatigue Crack Growth: Dislocation Models (2014) (9)
Structural anisotropy in equal-channel angular extruded nickel revealed by dilatometric study of excess volume (2017) (9)
Tuneable Magneto-Resistance by Severe Plastic Deformation (2019) (9)
Microstructure and vacancy-type defects of high-pressure torsion deformed Al-3 wt%Cu alloy (2012) (9)
Prediction of effective mode II fatigue crack growth threshold for metallic materials (2017) (9)
Surface and Bulk Degradation of Teflon® FEP Retrieved from the Hubble Space Telescope Solar Arrays (2008) (9)
Formation of High-Angle Grain Boundaries in Iron upon Cold Deformation by Equal-Channel Angular Pressing (2004) (9)
Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions (2017) (9)
A Novel Setup for In Situ Monitoring of Thermomechanically Cycled Thin Film Metallizations (2019) (9)
Influence of Processing Parameters on the Mechanical Properties of HPT‐Deformed Nickel/Carbon Nanotube Composites (2018) (9)
The effect of pre-deformation on the ductility of chromium (2002) (9)
Deformation characteristics of ultrafine grained and nanocrystalline iron and pearlitic steel - An in situ synchrotron investigation (2018) (8)
Plastic strain triggers structural instabilities upon cyclic loading in ultrafine-grained nickel (2020) (8)
Synthesis of bulk reactive Ni–Al composites using high pressure torsion (2020) (8)
Strength and ductility of heavily deformed pearlitic microstructures (2017) (8)
Deformation behavior of Cu-composites processed by HPT (2014) (8)
Influence of cold rolling on the fatigue crack growth behavior of tungsten (2021) (8)
Effects of microstructure and crystallography on crack path and intrinsic resistance to shear-mode fatigue crack growth (2015) (8)
Bulk metallic dual phase glasses by severe plastic deformation (2018) (8)
On the magnetic nanostructure of a Co–Cu alloy processed by high-pressure torsion (2020) (7)
Measurability of crack closure (1999) (7)
Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path (2019) (7)
Failure Mechanisms in a Fatigue-Loaded High-Performance Powder Metallurgical Tool Steel (2009) (7)
Tailoring the Magnetic Properties of Ferritic Alloys by HPT (2008) (7)
Synthesis of nanodiamond reinforced silver matrix nanocomposites: Microstructure and mechanical properties (2020) (7)
Dislocation modelling of fatigue cracks : An overview : Special issue on recent progress in understanding of materials fracture (2001) (7)
Magnetic dilution by severe plastic deformation (2020) (7)
Microstructure and Indentation Size-Effect in Pure Niobium Subjected to SPD via ECAP and HPT (2008) (7)
Modified NASGRO Equation for Short Cracks and Application to the Fitness-for-purpose Assessment of Surface-treated Components (2014) (7)
Comparison of Single Crystalline and Polycrystalline Behavior under High Pressure Torsion (2007) (7)
Broadband optoacoustic measurements of ultrasound attenuation in severely plastically deformed nickel (2010) (7)
Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments (2021) (7)
Electron Irradiation Effects on Strength and Ductility of Polymer Foils Studied by Femtosecond Laser-Processed Micro-Tensile Specimens (2019) (6)
Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens (2019) (6)
A theoretical insight into hydrogen clustering at defects in Ni (2020) (6)
Fatigue crack threshold analysis of TiAl SENT and CC specimens – Influence of starter notch and precracking (2020) (6)
Development of Microstructure and Thermal Stability of Nano‐Structured Chromium Processed by Severe Plastic Deformation (2005) (6)
Prediction of the mechanical behaviour of pearlitic steel based on microcompression tests, micromechanical models and homogenization approaches (2018) (6)
The dislocation-free zone and the threshold of the effective stress intensity range (1989) (6)
Fatigue crack growth in railway axle specimens – Transferability and model validation (2020) (6)
The plastic deformation of fracture surface contacts in fatigue (1996) (6)
An Overview on the Fracture Behavior of Metals Processed by High Pressure Torsion (2010) (6)
Damage mechanisms in materials for cold forging dies under loading conditions typical for dies (2008) (6)
Three‐Dimensional Analysis of Decorated Ceramic Fracture Surfaces by Automatic Stereophotogrammetry (2000) (6)
In-situ TEM investigation of toughening in Silicon at small scales (2021) (6)
Recrystallization and Grain Growth in Ultrafine‐Grained Materials Produced by High Pressure Torsion (2011) (6)
Overview of the Grain Size Effects on the Mechanical and Deformation Behaviour of Electrodeposited Nanocrystalline Nickel − From Nanoindentation to High Pressure Torsion (2009) (6)
Fatigue Crack Growth Behavior of Ultrafine-grained Nickel Produced by High Pressure Torsion☆ (2014) (6)
A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy (2020) (6)
The effect of high pressure torsion on structural refinement and mechanical properties of an austenitic stainless steel. (2013) (6)
Mechanical properties of electrodeposited amorphous/crystalline multilayer structures in the Fe-P system (2018) (6)
Microstructure and Thermal Stability of Tungsten Based Materials after Severe Plastic Deformation (2005) (6)
Nanoindentation applied on a tungsten - copper composite before and after high-pressure torsion (2005) (5)
Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices (2020) (5)
Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo5 Permanent Magnets Generated by High Pressure Torsion (2020) (5)
LIMITATIONS IN THE REFINEMENT BY SEVERE PLASTIC DEFORMATION: THE EFFECT OF PROCESSING (2010) (5)
Introduction of Planar High Pressure Torsion (P‐HPT) for Fabrication of Nanostructured Sheets (2018) (5)
Attenuation of ultrasound in severely plastically deformed nickel (2011) (5)
Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation (2020) (5)
Effect of Carbon in Severe Plastically Deformed Metals (2020) (5)
Sampling the Cu–Fe–Co phase diagram by severe plastic deformation for enhanced soft magnetic properties (2021) (5)
Cementite decomposition in 100Cr6 bearing steel during high-pressure torsion: Influence of precipitate composition, size, morphology and matrix hardness (2021) (5)
Effect of periodic overloads in particle reinforced aluminum alloys: the near threshold behavior (2004) (5)
The Influence of Type and Path of Deformation on the Microstructural Evolution during Severe Plastic Deformation (2005) (5)
Effect of the discrete nature of plasticity on fatigue crack propagation (2001) (5)
Damage Tolerance Concepts for Railway Switch Components (2017) (5)
Nanostructured Low Carbon Steels Obtained from the Martensitic State via Severe Plastic Deformation, Precipitation, Recovery, and Recrystallization (2019) (5)
5718 - FINE DESCRIPTION OF FRACTURE BY USING DISCRETE PARTICLE MODEL (2013) (5)
Temperature dependent structural evolution in nickel/carbon nanotube composites processed by high-pressure torsion (2017) (5)
Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks (2019) (4)
Determination of crack initiation and crack growth stress-life curves by fracture mechanics experiments and statistical analysis (2016) (4)
Transmission electron microscope investigations on Cu-Ag alloys produced by high-pressure torsion (2014) (4)
Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys (2022) (4)
A hybrid crack tip element containing a strip-yield crack-tip plasticity model (2014) (4)
Discussion of error in the analysis of the wake dislocation problem. Author's reply (1998) (4)
Nanocrystalline FeCr alloys synthesised by severe plastic deformation - a potential material for exchange bias and enhanced magnetostriction (2021) (4)
Effect of high pressure torsion on crystallization and magnetic properties of Fe73.9Cu1Nb3Si15.5B6.6 (2021) (4)
Dislocation Shielding of Fatigue Cracks (1995) (4)
Strengthening of Nickel Deformed by High Pressure Torsion (2008) (4)
Quasi-static and dynamic fracture toughness of a γ-TiAl alloy: Measurement techniques, fractography and interpretation (2021) (4)
The effect of solute atoms on the bulk and grain boundary cohesion in Ni: implications for hydrogen embrittlement (2021) (4)
Severe Plastic Deformation of a Bainitic Rail Steel (2008) (4)
Near-Threshold Propagation of Mode II and Mode III Cracks (2013) (4)
Rate-depending plastic deformation behaviour in a nickel-base alloy under hydrogen influence (2021) (4)
Fabrication of a W-25%Cu Nanocomposite by High Pressure Torsion (2006) (4)
3D Morphology of Fracture Surfaces Created by Mixed-mode II+III Fatigue Loading in Metallic Materials (2014) (4)
Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion (2021) (3)
Experimental validation of microstructure evolution in crystalline materials (2010) (3)
On the geometry of fatigue crack closure (1992) (3)
Experimental and calculation challenges of crack propagation in notches – From initiation to end of lifetime (2017) (3)
Fatigue Crack Growth in Metals under Pure Mode III:Reality or Fiction? (2013) (3)
Dependence of fracture strain on flaw size in rail switches—Experiments and theoretical modelling (2018) (3)
Internal stress and defect-related free volume in submicrocrystalline Ni studied by neutron diffraction and difference dilatometry (2017) (3)
Microstructure and Mechanical Properties of a C/C‐Cu Joint Developed for Plasma Facing Components (2006) (3)
The Driving Force On A Crack Approaching An Interface Of Materials With Different Yield Stresses: The Effect Of The Interlayer Thickness (1998) (3)
Fracture in chromium: an attempt to improve ductility (2013) (3)
Defects in Al-3wt%Cu after High-pressure Torsion Studied by Two-dimensional Doppler Broadening Spectroscopy (2012) (3)
The local composite architecture of MMCs-Effects on the local deformation and fracture behavior (2003) (3)
Mechanical and Fracture Mechanical Behaviour of Metallic Foams (2009) (3)
High-throughput study of binary thin film tungsten alloys (2017) (3)
Influence of Secondary Phase on Intrinsic Threshold and Path of Shear-Mode Fatigue Cracks in Metals (2018) (3)
Examination of C/C flat tile mock-ups with hypervapotron cooling after high heat flux testing (2007) (3)
Microstructure of Pure Ni Subjected to High Pressure Torsion (2010) (3)
Developing of Structure and Properties in Low‐Carbon Steels during Warm and Hot Equal Channel Angular Pressing (2005) (3)
Comparison of the Dislocation Structure of a CrMnN and a CrNi Austenite after Cyclic Deformation (2019) (3)
The role of crystallographic texture on mechanically induced grain boundary migration (2020) (3)
Effect of Residual Stresses on the Fatigue Crack Propagation in Welded Joints (2005) (3)
Microstructural Investigation of the Deformation Zone below Nano-Indents in Copper (2007) (3)
A special purpose Trefftz-element for mode III crack tip loading (2018) (3)
Thermal stabilization of metal matrix nanocomposites by nanocarbon reinforcements (2020) (3)
Influence of Different Types of Localized Corrosion on the Fatigue Behavior of an Austenitic Stainless Steel (2016) (2)
Role of interfaces on microstructure refinement and mechanical properties of severe plastically deformed copper and copper-silver eutectic (2017) (2)
How the interface type manipulates the thermomechanical response of nanostructured metals: A case study on nickel (2021) (2)
An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion (2019) (2)
Crack path investigations in a pearlitic rail steel after pre-deformation under cyclic Mode-II loading (2022) (2)
Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals (2001) (2)
A Testing Apparatus for SEM In-Situ Fatigue Testing of Small Scale Specimens and a Derived Application (2013) (2)
In situ AC-hysteresis measurements of SPD-processed Cu20(Fe15Co85)80 (2021) (2)
Soft Magnetic Properties of Ultra-Strong and Nanocrystalline Pearlitic Wires (2021) (2)
Athermal and Thermal Limits of the Grain Refinement by SPD (2008) (2)
Differences in Structural Evolution in Single- and Dual-Phase Materials during Severe Plastic Deformation (2006) (2)
Fracture of Metal Foams (2006) (2)
Crack Growth Rates and Corrosion Fatigue of Austenitic Stainless Steels in High Chloride Solutions (2011) (2)
Shear deformation of submicron-structured materials (2007) (2)
Geometrical model for calculating the effect of surface morphology on total x‐ray output of medical x‐ray tubes (2020) (2)
On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature (2022) (2)
Microstructure and Properties of a Fe-Cu Composite Processed by HPT Powder Consolidation (2010) (2)
The Mechanics of Moderately Stressed Cracks (2000) (2)
Crack driving forces for short cracks: The effect of work hardening (2017) (2)
From an understanding of structural restoration mechanisms towards a selective processing of extreme nanolamellar structures (2017) (2)
NEW APPROACH FOR TESTING AND MODELLING OF FATIGUE BEHAVIOUR (2014) (2)
Deformation and fatigue behavior measurement of thin films undergoing thermomechanical loading at high strain rates – A novel test setup (2015) (2)
On the Δ K eff Concept: An Investigation by Means of a Discrete Dislocation Model (1999) (2)
Periodic Overloads in the Near Threshold Regime (2004) (2)
Kristallographische Fraktometrie: Eine neue Methode zur Bruchflächenanalyse angewandt auf TiAl-Bruchflächen¹) / Crystallographic Fractometry: A New Method of Fracture Surface Analysis Applied on TiAl Fracture Surfaces (2000) (2)
Fatigue and Fracture Processes in High Performance PM Tool Steels (2006) (2)
Fracture mechanics of microsamples (2017) (2)
Microstructural evolution in immiscible alloys processed by High-Pressure Torsion (2014) (2)
Influence of Microstructure on the Fracture Toughness of Tungsten Alloys (2007) (2)
Crack Growth in Massive Forming: A Fracture Mechanics Approach (2004) (1)
Detection of broadband laser induced longitudinal ultrasonic pulses in ultrafine grain nickel by pancake coil (2012) (1)
The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungsten (2022) (1)
Ultrasonic Evaluation of Severely Plastically Deformed Metals (2011) (1)
Fatigue crack growth of deformed pearlitic rail steels under multiaxial loading (2022) (1)
Plasticity of moderately loaded cracks and the consequence of the discrete nature of plasticity to fatigue and fracture (2010) (1)
Effect of a single overload on the cyclic R-curve behaviour of a γ-TiAl TNM alloy (2022) (1)
A Fracture Mechanics Investigation on Crack Growth in Massive Forming (2004) (1)
Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy (2019) (1)
Fatigue Crack Growth Behaviour in Constant-Load Amplitude and Constant Delta-K Tests on Notched Specimens (2013) (1)
Formation of a Submicrocrystalline Structure in Titanium during Successive Uniaxial Compression in Three Orthogonal Directions (2005) (1)
On the Slowdown of the Crack Propagation Rate of Austenitic Stainless Steels in Corrosive Environment (2014) (1)
Structural Evolution in Aluminium Alloy AA6082 during HPT Deformation at Increased Temperature (2012) (1)
Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design (2022) (1)
Thermally Activated Deformation Behavior of ufg-Au: Environmental Issues During Long-Term and High-Temperature Nanoindentation Testing (2015) (1)
Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing (2022) (1)
Load history effects on fatigue crack propagation: Its effect on the R-curve for threshold (2015) (1)
A novel setup for wafer curvature measurement at very high heating rates. (2017) (1)
Texture evolution and microstructure of ECAP Cu determined by XRD and EBSD (2005) (1)
Crack propagation resistance of TiAl alloys (2022) (1)
Effect of Pressure on the Final Grain Size after High Pressure Torsion (2013) (1)
A Perspective to Control Laser-Induced Periodic Surface Structure Formation at Glancing-Incident Femtosecond Laser-Processed Surfaces (2021) (1)
ULTRAFINE GRAIN STRUCTURE OF MEDIUM CARBON STEEL PREPARED BY HPT SEVERE PLASTIC DEFORMATION METHOD (2009) (1)
A comparison of homogenization approaches for modelling the mechanical behaviour of pearlitic steel (2014) (1)
HIGH PRESSURE TORSION AND ITS APPLICATION FOR GRAIN REFINEMENT IN MEDIUM CARBON STEEL (2010) (1)
Damage evolution in nickel-base alloy torsion specimens and its influence on subsequent tensile deformability (2008) (1)
Cyclic crack tip deformation - the influence of environment (2013) (1)
Dislocation structure of Ni deformed by high pressure torsion (2001) (1)
Absolute concentration of free volumes in nanophase metals prepared by high-pressure torsion (2010) (1)
Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron (2022) (1)
FRAGMENTATION IN LARGE STRAIN COLD ROLLED ALUMINIUM AS OBSERVED BY SYNCHROTRON X-RAY BRAGG PEAK PROFILE ANALYSIS (SXPA), ELECTRON BACK SCATTER PATTERNING (EBSP) AND TRANSMISSION ELECTRON MICROSCOPY (TEM) (2000) (1)
Recrystallization and Grain Growth Behavior of SPD Deformed 316L Stainless Steel (2010) (1)
Spinodal Decomposition Stabilizes Plastic Flow in a Nanocrystalline Cu-Ti Alloy (2021) (1)
The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experiments (2022) (1)
Finite element-based analysis of buckling-induced plastic deformation (2021) (1)
Local fracture behaviour and crack tip deformation in metal foams (2013) (1)
Thermal behavior of pure Ni deformed by high pressure torsion to ultra-high strain (2009) (1)
Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718 (2022) (1)
The Characterization of Crystal Plasticity by Orientation Image Microscopy and Local Deformation Measurements (2005) (1)
Oxide-stabilized microstructure of severe plastically deformed CuCo alloys (2022) (1)
Microstructure and Failure Characteristics of Nanostructured Molybdenum–Copper Composites (2019) (1)
Strong and stable nanostructured Ni by light alloying (2012) (1)
Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation (2022) (1)
Towards a Reduced Activation Structural Materials Database for Fusion DEMO Reactors (2004) (1)
Fracture mechanic investigations of austenitic stainless steels in different cold worked states (2010) (1)
THE EFFECT OF EQUAL CHANNEL ANGULAR PRESSING ON THE PARTICLE DISTRIBUTION AND FRACTURE PROPERTIES OF A METAL MATRIX COMPOSITE (2004) (0)
Strong and Stable Nanocomposites Prepared by High-Pressure Torsion of Cu-Coated Fe Powders (2016) (0)
A comparison of classical continuum mechanics with a dislocation model to describe cyclic crack tip plasticity (2013) (0)
Atomic sacle Characterization of Severly Deformed Cu-based Nanocrystalline Alloys via Transmission Electron Microscopy (2019) (0)
On the Micromechanisms of Fatigue Long Crack Growth under Remote Shear Loading Modes (2013) (0)
The inner-cut-off-radius in the Ritchie-Knott-Rice model of cleavage fracture. (2013) (0)
Free Volume in SPD-Ni: Influence of Deformation Method, Structure and Purity studied by Difference Dilatometry (2014) (0)
Understanding structural evolution of nanostructures during deformation from 2D (3D) experiments (2019) (0)
In-situ microcompression experiments on a nanocrystalline pearlitic steel (2013) (0)
Correction to: Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion (2021) (0)
Deformation-Induced Homogenization of the Multi-Phase Senary High-Entropy Alloy Monbtativzr Processed by High-Pressure Torsion (2023) (0)
Sampling the CueFeeCo phase diagram by severe plastic deformation for enhanced soft magnetic properties (2021) (0)
Fatigue crack growth behavior of ARMCO-iron at low temperature (2013) (0)
Corrigendum to “Fracture toughness evaluation of ultrafine-grained nickel” [Scripta Mater. 64 (2011) 982–985] (2011) (0)
Magnetoresistive behaviour of ternary Cu-based materials processed by high-pressure torsion (2022) (0)
Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy Alloy (2023) (0)
Decomposition-resistant carbonitride precipitates in X30CrMoN15-1 high-nitrogen bearing steel deformed by high-pressure torsion (2022) (0)
3981 - A COMPARISON OF TWO EXPERIMENTAL METHODS FOR ASSESSING THE INFLUENCE OF INITIAL DEFECTS ON FATIGUE LIFE (2013) (0)
Tracking the Structural and Chemical Evolution of Nanostructured Materials by In-Situ Experiments (2019) (0)
4504 - APPLICATION OF MIXED-MODE FRACTURE MECHANICS IN GEOTECHNICAL ENGINEERING (2013) (0)
Influence of the loading mode and stress triaxiality on the fracture toughness in austenitic steel (2006) (0)
Effect of Impurities on the Microstructure of HPT Deformed Nickel (2010) (0)
Quantitative Analysis of Fracture Surface Morphologies in a Zr‐Ti‐Ni‐Cu‐Be Bulk Metallic Glass (2006) (0)
Erratum to: Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium (2010) (0)
Measurement of the load/deflection curve for the determination of R-curve behaviour in the 3-point bending test (2000) (0)
Nanostructured Materials (2012) (0)
Defects and structural anisotropy of HPT- and ECAP-deformed metals studied by difference dilatometry (Highlight lecture) (2015) (0)
Positron annihilation studies of HPT deformed aluminium alloys (2009) (0)
Modelling of loading rate effect on fatigue crack growth (1993) (0)
20th European Conference on Fracture (ECF20) Fatigue crack growth behavior of ultrafine-grained nickel produced by high pressure torsion (2014) (0)
Correction to: Strain-hardening properties of the high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion (2021) (0)
Fatigue crack propagation perpendicular to an interface: the effect of plastic mismatch (2013) (0)
Improvement of fatigue performance by residual stresses: a fracture mechanics approach (2013) (0)
Fracture resistance of pearlitic steels (2015) (0)
4218 - MESHLESS ANALYSIS OF CRACK PROPAGATION IN MULTIPHASE MATERIAL (2013) (0)
Propagation of Long Fatigue Cracks under Remote Modes II and III in Ferritic-Pearlitic Steel (2015) (0)
Fracture behavior of high strength pearlitic steel wires (2015) (0)
Bulk metallic glass composites: microstructural influences on mechanical properties (2017) (0)
A Direct Method of Determining Complex Depth Profiles of Residual Stresses in Thin Films on a Nanoscale - Mechanics of Residually Stressed Systems (2007) (0)
Determination of micro-mechanical properties: In-situ compression, tension and fracture testing within the SEM (2009) (0)
Dependence of the fracture toughness on crack depth and crack deformation mode (2005) (0)
Advances in in-situ testing in scanning electron microscopes: probing mechanical properties at the nano/micro-scale (2011) (0)
XFEM FOR A CRACK MODEL WITH STRIP-YIELD CRACK TIP PLASTICITY (2013) (0)
Impact of Microstructure on the Performance of Wre10 Conversion Layers for Stationary and Rotating Anodes (2023) (0)
Fracture mechanical behaviour of plasma-sprayed coatings (2013) (0)
From powders to bulk metallic glass composites (2017) (0)
Microstructural evolution of a pearlitic steel during severe plastic deformation (2005) (0)
Absolute concentration of free volumes and related properties of ultrafine grained metals studied by time-dependent dilatometry (2012) (0)
In situ atomic-scale observation of oxidation and decomposition processes in nanocrystalline alloys (2018) (0)
In Situ Annealing of Severe Plastic Deformed OFHC Copper (2007) (0)
Crack Tip Plasticity Influence on Cracks Approaching Cu-Si Interface (2019) (0)
Influence of dislocation pile-ups on mechanical properties of microcantilevers (2013) (0)
A new SEM in-situ fatigue testing apparatus and its application for evaluation of damage at higher load cycles (2013) (0)
Damage Evolution in Torsion Specimens Deformed at Forging Temperatures (2006) (0)
5461 - CRACK CLOSURE: MECHANISMS, EXPLANATION AND PREDICTION (2013) (0)
Threshold of the stress intensity range and the threshold of the effective stress intensity range of ARMCO-iron: the influence of microstructure and environment (2013) (0)
Fracture toughness and fatigue crack propagation m easurem ents in ultrafine grained Iron and Nickel (2016) (0)
Defects and structural anisotropy of HPT- and ECAP-deformed metals studied by differential dilatometry (2015) (0)
ORAL REFERENCE: ICF100438OR (2001) (0)
Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten (2023) (0)
Characterization of deformation behaviour of aluminium alloy AA 6082 processed by HPT (2013) (0)
Numerical and Experimental Fracture Mechanics Based Optimization of the Crack Resistance of Carbon/Carbon to Copper Interfaces (2009) (0)
Impact of temperature and hydrogen on the nanomechanical properties of a highly deformed high entropy alloy (2019) (0)
Near-threshold fatigue crack growth behavior of ultrafine-grained metals (2016) (0)
Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending (2019) (0)
Anisotropy of ultrafine-lamellar and nanolamellar pearlitic structures revealed by in-situ micro compression testing (2015) (0)
Fracture toughness and fracture processes in ductile metallic foams (2013) (0)
A comparison of the fatigue crack growth behavior of pure ultrafine-grained metals (2016) (0)
Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strength (2023) (0)
Crack Closure Behaviour of Iron in Air and Vacuum (2013) (0)
Anisotropic defect recovery in HPT- and ECAP- processed ultrafine-grained Ni studied by difference dilatometry (2016) (0)
Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloy (2023) (0)
Corrosion fatigue properties of austenitic stainless steels with different composition and strength in chloride solutions (2013) (0)
Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests (2023) (0)
Microstructure evolution and strength response of ultrafine grain medium carbon steel processed by high pressure torsion (2010) (0)
Ductilitsation of tungsten (W) through cold-rolling (2017) (0)
Quantitative Approaches for in situ SEM and TEM Deformation Studies (2012) (0)
Fatigue Crack Propagation in Two γ‐TiAl Sheet Alloys (2006) (0)
Microstructural and mechanical comparison of Ti and Ti-alloys after severe plastic deformation (2016) (0)
On the {Delta}K{sub eff} concept: An investigation by means of a discrete dislocation model (1999) (0)
The Temperature Field Surrounding the Fatigue Crack Tip (2013) (0)
A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy (2020) (0)
Excess volume and defect annealing in HPT- and ECAP-processed ultrafine-grained Ni studied by difference dilatometry (2016) (0)
Small scale deformation behavior of Au – influence of microstructure and temperature (2016) (0)
Synthesis and Properties of Bulk Metallic Glass Composites (2018) (0)
Ab initio calculations of grain boundaries in W, Mo, Fe and W25at%Re (2015) (0)
Investigation of the plastic deformation during cleavage fracture. (2013) (0)
Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide (2023) (0)
Warm Forming of FCC Poly Crystals: The Effect of Grain Size under Different Forming Conditions on the Softening Behavior (2012) (0)
The influence of grain size on the fatigue crack growth of ultrafine-grained and nanocrystalline metals (2015) (0)
High-pressure torsion induced open volume defects in Al-3wt%Cu investigated by positron annihilation spectroscopy (2012) (0)
Fatigue and cracking behaviour of austenitic CrNiMo and CrMnN steels in chloride containing environment at elevated temperature (2012) (0)
Fractographic studies of fatigue cracks under pure Mode II loading (2013) (0)
Crystallographic fractometry of TiAl fracture surfaces. (2013) (0)
A new model for the plasticity-induced closure under plane strain condition (2013) (0)
Cracks in thin Cu films on Si substrate – Plasticity influence (2020) (0)
Short Crack Growth in Al 6013-T6 (2006) (0)
Properties of Nanoscaled Multiphase Structures and Non-Equilibrium Solid Solutions Obtained by Severe Plastic Deformation [Abstract + Supplemental Data] (2006) (0)
Corrosion Fatigue and Repassivation Investigations of CrNiMo Austenitic Stainless Steels in Chloride Environment (2013) (0)
Thermally activated processes in materials probed by nanoindentation - challenges, solutions, and insights (2015) (0)
Metastable nanomaterials and nanocomposites obtained by high-pressure torsion powder consolidation (2019) (0)
The limits of strength and toughness: A lesson from nanostructured metals (2016) (0)
High strength pearlitic nanocomposites (2014) (0)
Simulation of crack propagation using hybrid Trefftz method based on a strip-yield crack-tip plasticity model for automotive crash applications (2013) (0)
Nanoindentation applied on a tungsten–copper composite before and after high-pressure torsion (2005) (0)
Fracture and fracture toughness of nanopolycrystalline metals produced by SPD (2015) (0)
Deformation behavior of bulk metallic glasses produced via Severe Plastic Deformation and the influence of a second phase (2015) (0)
Microstructure and vacancy-type defects in Al-3wt%Cu after high-pressure torsion (2011) (0)
Ultrafine Grain Structure Evolution in AA6085 Aluminium Alloy Processed by HPT at Increased Temperature (2012) (0)
Defects and structural anisotropy of HPT- and ECAP-deformed Ni studied by difference dilatometry (2015) (0)
A hybrid Trefftz mode III crack tip element (2014) (0)
EUROCORR 2010, The European Corrosion Conference (2010) (0)
EXPERIMENTAL EVALUATION OF FATIGUE LONG CRACK PROPAGATION UNDER REMOTE SHEAR LOADING MODES II AND III (2008) (0)
Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses? (2023) (0)
Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi (2022) (0)
Corrosion Fatigue of Austenitic Stainless Steel in Different Hot Chloride Solutions (2015) (0)
The threshold of stress intensity range in aluminum alloys (2013) (0)
The Influence of Grain Size on the Fatigue Crack Growth of Ultrafine-grained Metals (2016) (0)
Femtosecond laser and FIB: A revolutionary approach in rapid micro- mechanical sample preparation (2017) (0)
Ultrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties Response (2010) (0)
SPD Deformation of Pearlitic, Bainitic and Martensitic Steels (2023) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Reinhard Pippan?

Reinhard Pippan is affiliated with the following schools: