Ralph E. White
#106,578
Most Influential Person Now
Ralph E. White's AcademicInfluence.com Rankings
Ralph E. Whitechemistry Degrees
Chemistry
#1964
World Rank
#2792
Historical Rank
Physical Chemistry
#194
World Rank
#229
Historical Rank
Download Badge
Chemistry
Why Is Ralph E. White Influential?
(Suggest an Edit or Addition)Ralph E. White's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Comprehensive Treatise of Electrochemistry (1981) (2172)
- Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries (1998) (1174)
- A water and heat management model for proton-exchange-membrane fuel cells (1993) (1056)
- Development of First Principles Capacity Fade Model for Li-Ion Cells (2004) (630)
- Review of Models for Predicting the Cycling Performance of Lithium Ion Batteries (2006) (616)
- Power and life extension of battery-ultracapacitor hybrids (2002) (493)
- Electrochemical Determination of the Diffusion Coefficient of Hydrogen Through an LaNi4.25Al0.75 Electrode in Alkaline Aqueous Solution (1995) (469)
- Mathematical modeling of the capacity fade of Li-ion cells (2003) (401)
- Mathematical Modeling of the Lithium Deposition Overcharge Reaction in Lithium‐Ion Batteries Using Carbon‐Based Negative Electrodes (1999) (384)
- Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior (2011) (379)
- Mathematical modeling of lithium-ion and nickel battery systems (2002) (338)
- Solvent Diffusion Model for Aging of Lithium-Ion Battery Cells (2004) (329)
- A Mathematical Model for a Lithium–Sulfur Cell (2008) (309)
- Mathematical modeling of a lithium ion battery with thermal effects in COMSOL Inc. Multiphysics (MP) (2011) (308)
- A generalized cycle life model of rechargeable Li-ion batteries (2006) (307)
- Thermal Model for a Li-Ion Cell (2008) (301)
- Determination of the Lithium Ion Diffusion Coefficient in Graphite (1999) (300)
- Characterization of Commercially Available Lithium-Ion Batteries (1998) (286)
- Capacity fade of Sony 18650 cells cycled at elevated temperatures. Part II. Capacity fade analysis (2002) (283)
- Capacity fade of Sony 18650 cells cycled at elevated temperatures: Part I. Cycling performance (2002) (268)
- Studies on Capacity Fade of Lithium-Ion Batteries (2000) (248)
- Comparison between Computer Simulations and Experimental Data for High-Rate Discharges of Plastic Lithium-Ion Batteries (2000) (241)
- Mathematical modeling of secondary lithium batteries (2000) (222)
- Theoretical Analysis of Stresses in a Lithium Ion Cell (2010) (222)
- Capacity fade analysis of a lithium ion cell (2008) (220)
- Reduction of Model Order Based on Proper Orthogonal Decomposition for Lithium-Ion Battery Simulations (2009) (210)
- Electrochemical Investigations of Cobalt-Doped LiMn 2 O 4 as Cathode Material for Lithium-Ion Batteries (1998) (200)
- Determination of the hydrogen diffusion coefficient in metal hydrides by impedance spectroscopy (1998) (166)
- Effect of Porosity on the Capacity Fade of a Lithium-Ion Battery Theory (2004) (165)
- State of charge estimation using an unscented filter for high power lithium ion cells (2010) (155)
- Extension of Physics-Based single Particle Model for Higher Charge-Discharge Rates (2013) (142)
- Modeling Lithium Intercalation of a Single Spinel Particle under Potentiodynamic Control (2000) (140)
- Methanol Fuel Cell Model: Anode (1999) (135)
- Approximate Solutions for Galvanostatic Discharge of Spherical Particles I. Constant Diffusion Coefficient (2001) (134)
- Parameter Estimation and Life Modeling of Lithium-Ion Cells (2008) (133)
- A Mathematical Model for a Lithium-Ion Battery/Electrochemical Capacitor Hybrid System (2005) (132)
- Thermal stability of LiPF6–EC:EMC electrolyte for lithium ion batteries (2001) (131)
- A Distributed Thermal Model for a Li-Ion Electrode Plate Pair (2013) (130)
- Synthesis and Characterization of Hydrous Ruthenium Oxide-Carbon Supercapacitors (2001) (128)
- A Mathematical Model of a Lead‐Acid Cell Discharge, Rest, and Charge (1987) (124)
- Electrochemical Studies of Carbon Films from Pyrolyzed Photoresist (1998) (123)
- Thermodynamic model development for lithium intercalation electrodes (2008) (123)
- Parameter Estimation and Model Discrimination for a Lithium-Ion Cell (2007) (122)
- Influence of Some Design Variables on the Thermal Behavior of a Lithium‐Ion Cell (1999) (122)
- Electrochemical investigation of CrO2.65 doped LiMn2O4 as a cathode material for lithium-ion batteries (1998) (122)
- Capacity Fade Model for Spinel LiMn2O4 Electrode (2013) (117)
- Mathematical Model of a Direct Methanol Fuel Cell (2004) (115)
- A lumped model of venting during thermal runaway in a cylindrical Lithium Cobalt Oxide lithium-ion cell (2016) (112)
- Experimental characterization of hybrid power systems under pulse current loads (2002) (103)
- Analytical Solution for the Impedance of a Porous Electrode (2004) (100)
- A three-dimensional multi-physics model for a Li-ion battery (2013) (96)
- Comparison of a particle filter and other state estimation methods for prognostics of lithium-ion batteries (2015) (96)
- A Mathematical Model of an Electrochemical Capacitor with Double‐Layer and Faradaic Processes (1999) (95)
- Increasing Proton Exchange Membrane Fuel Cell Catalyst Effectiveness Through Sputter Deposition (2002) (94)
- Analysis of capacity fade in a lithium ion battery (2005) (93)
- Electrochemical Production and Corrosion Testing of Amorphous Ni‐P (1988) (92)
- Online Estimation of the State of Charge of a Lithium Ion Cell (2006) (91)
- An Efficient Electrochemical–Thermal Model for a Lithium-Ion Cell by Using the Proper Orthogonal Decomposition Method (2010) (91)
- Temperature and Concentration Dependence of the Specific Conductivity of Concentrated Solutions of Potassium Hydroxide (1997) (90)
- Comparison of the capacity fade of Sony US 18650 cells charged with different protocols (2003) (90)
- Calendar life study of Li-ion pouch cells (2007) (84)
- Quantifying Cell-to-Cell Variations in Lithium Ion Batteries (2012) (82)
- An approach to fault diagnosis of chemical processes via neural networks (1993) (82)
- Oxygen Reduction in a Proton Exchange Membrane Test Cell (1989) (82)
- Performance study of commercial LiCoO2 and spinel-based Li-ion cells (2002) (81)
- Numerical analysis of heat propagation in a battery pack using a novel technology for triggering thermal runaway (2017) (81)
- Calendar life performance of pouch lithium-ion cells (2005) (80)
- Mathematical Modeling of Proton‐Exchange‐Membrane Fuel‐Cell Stacks (1997) (80)
- Studies on activated carbon capacitor materials loaded with different amounts of ruthenium oxide (2001) (80)
- A Modified Electrochemical Process for the Decomposition of Hydrogen Sulfide in an Aqueous Alkaline Solution (1991) (79)
- Comparison of Single Particle and Equivalent Circuit Analog Models for a Lithium-Ion Cell (2011) (77)
- Governing Equations for Transport in Porous Electrodes (1997) (77)
- Mathematical Modeling of the Formation of Calcareous Deposits on Cathodically Protected Steel in Seawater (1993) (75)
- Modelling Li-Ion Cell Thermal Runaway Triggered by an Internal Short Circuit Device Using an Efficiency Factor and Arrhenius Formulations (2017) (74)
- Ni‐Composite Microencapsulated Graphite as the Negative Electrode in Lithium‐Ion Batteries I. Initial Irreversible Capacity Study (2000) (74)
- Oxygen Diffusion Coefficient and Solubility in a New Proton Exchange Membrane (2000) (72)
- Simulation and Analysis of Stress in a Li-Ion Battery with a Blended LiMn 2 O 4 and LiNi 0.8 Co 0.15 Al 0.05 O 2 Cathode (2014) (69)
- Electrochemical Production of Hydrogen and Sulfur by Low-Temperature Decomposition of Hydrogen Sulfide in an Aqueous Alkaline Solution (1990) (68)
- Determination of Transport and Electrochemical Kinetic Parameters of Bare and Copper‐Coated LaNi4.27Sn0.24 Electrodes in Alkaline Solution (1996) (67)
- Parametric Studies of the Formation of Calcareous Deposits on Cathodically Protected Steel in Seawater (1993) (65)
- A Steady-State Impedance Model for a PEMFC Cathode (2004) (62)
- Modeling Heat Conduction in Spiral Geometries (2003) (60)
- The Effects of Separator Design on the Discharge Performance of a Starved Lead‐Acid Cell (1990) (59)
- Comparison of approximate solution methods for the solid phase diffusion equation in a porous electrode model (2007) (57)
- Electrochemical Characterization of Electronically Conductive Polypyrrole on Cyclic Voltammograms (1991) (56)
- Comparison of finite difference and control volume methods for solving differential equations (2000) (56)
- Mathematical modeling of a primary zinc/air battery (1992) (55)
- New Separation of Variables Method for Composite Electrodes With Galvanostatic Boundary Conditions (2001) (55)
- Analytical Expression for the Impedance Response of an Insertion Electrode Cell (2007) (55)
- Development of a Novel CO Tolerant Proton Exchange Membrane Fuel Cell Anode (2002) (55)
- Electrodeposition of Copper‐Nickel Alloys from Citrate Solutions on a Rotating Disk Electrode II . Mathematical Modeling (1988) (55)
- Hydrogen Diffusion, Solubility, and Water Uptake in Dow's Short‐Side‐Chain Perfluorocarbon Membranes (1992) (55)
- Mathematical Modeling of Cathodic Protection Using the Boundary Element Method with a Nonlinear Polarization Curve (1992) (54)
- A Boundary Condition for Porous Electrodes (2004) (54)
- Shrinking Core Model for the Discharge of a Metal Hydride Electrode (2000) (53)
- Galvanostatic Pulse and Pulse Reverse Plating of Nickel‐Iron Alloys from Electrolytes Containing Organic Compounds on a Rotating Disk Electrode (1993) (53)
- An experimental and analytical study of thermal runaway propagation in a large format lithium ion battery module with NCM pouch-cells in parallel (2019) (52)
- Using Electrochemical Impedance Spectroscopy as a Tool for Organic Coating Solute Saturation Monitoring (1993) (52)
- Life modeling of a lithium ion cell with a spinel-based cathode (2013) (52)
- Ni‐Composite Microencapsulated Graphite as the Negative Electrode in Lithium‐Ion Batteries II: Electrochemical Impedance and Self‐Discharge Studies (2000) (52)
- Study of Ionic Conductivity Profiles of the Air Cathode of a PEMFC by AC Impedance Spectroscopy (2003) (52)
- Cycle life performance of lithium-ion pouch cells (2006) (51)
- Calendar life study of Li-ion pouch cells: Part 2: Simulation (2008) (51)
- Moving Boundary Model for the Discharge of a LiCoO2 Electrode (2007) (51)
- Corrosion initiation time of steel reinforcement in a chloride environment—A one dimensional solution (1997) (50)
- Maximizing the Life of a Lithium-Ion Cell by Optimization of Charging Rates (2010) (50)
- A new homotopy for seeking all real roots of a nonlinear equation (2011) (50)
- A non-isothermal model of a nickel–metal hydride cell (2001) (49)
- Theoretical Analysis of the Discharge Performance of a NiOOH / H 2 Cell (1994) (49)
- Analytical Expression for the Impedance Response for a Lithium-Ion Cell (2008) (49)
- Mathematical Modeling of Hexavalent Chromium Decontamination from Low Surface Charged Soils (1997) (48)
- Studies on Capacity Fade of Spinel-Based Li-Ion Batteries (2002) (47)
- Studies on Electroless Cobalt Coatings for Microencapsulation of Hydrogen Storage Alloys (1998) (47)
- State of Charge and Loss of Active Material Estimation of a Lithium Ion Cell under Low Earth Orbit Condition Using Kalman Filtering Approaches (2012) (47)
- An approximate solution for solid-phase diffusion in a spherical particle in physics-based Li-ion cell models (2012) (46)
- A Mathematical Model of a Sealed Nickel‐Cadmium Battery (1991) (45)
- Modeling Lithium Intercalation in a Porous Carbon Electrode (2001) (44)
- Mathematical models of the nickel hydroxide active material (2000) (44)
- Anodic Oxidation of Ethylenediaminetetraacetic Acid on Platinum Electrode in Alkaline Medium (1996) (44)
- A Thermal Analysis of a Spirally Wound Battery Using a Simple Mathematical Model (1989) (43)
- Mathematical Model for a Spirally-Wound Lithium-Ion Cell (2014) (43)
- Experimental Study on Module-to-Module Thermal Runaway-Propagation in a Battery Pack (2019) (43)
- Mathematical Modeling for the Discharge of a Metal Hydride Electrode (1995) (41)
- A Parallel-Plate Electrochemical Reactor Model for the Destruction of Nitrate and Nitrite in Alkaline Waste Solutions (1995) (41)
- A Mathematical Model of a Lithium/Thionyl Chloride Primary Cell (1989) (40)
- Modeling Vaporization, Gas Generation and Venting in Li-Ion Battery Cells with a Dimethyl Carbonate Electrolyte (2017) (40)
- Lithium ion cell modeling using orthogonal collocation on finite elements (2012) (40)
- Mathematical Modeling of a Nickel‐Cadmium Battery Effects of Intercalation and Oxygen Reactions (1991) (40)
- Computational Methods in Chemical Engineering with Maple (2010) (40)
- Corrosion of Cu and Cu-Ni Alloys in 0.5M NaCl and in Synthetic Seawater (1985) (40)
- Mathematical Modeling of a Nickel‐Cadmium Cell: Proton Diffusion in the Nickel Electrode (1995) (39)
- Predicting Shunt Currents in Stacks of Bipolar Plate Cells (1986) (39)
- Theoretical Analysis of Metal Hydride Electrodes Studies on Equilibrium Potential and Exchange Current Density (1998) (39)
- A Review of Mathematical Modeling of the Zinc/Bromine Flow Cell and Battery (1987) (39)
- Comparing Electrochemical Impedance Spectroscopy Methods for Estimating the Degree of Delamination of Organic Coatings on Steel (1992) (38)
- Thermal Model for Lithium Ion Battery Pack with Mixed Parallel and Series Configuration (2011) (37)
- Application of Porous Electrode Theory on Metal Hydride Electrodes in Alkaline Solution (1996) (36)
- Parameter Estimates for a PEMFC Cathode (2004) (36)
- Estimation of Diffusion Coefficient of Lithium in Carbon Using AC Impedance Technique (2002) (36)
- Determination of transport and electrochemical kinetic parameters of M-H electrodes (1996) (36)
- Cycle life and utilization studies on cobalt microencapsulated AB5 type metal hydride (1999) (34)
- Oxygen Reduction on Silver in 6.5M Caustic Soda Solution (1988) (34)
- Semi-empirical modeling of charge and discharge profiles for a LiCoO2 electrode (2007) (34)
- Hydrogen-Atom Direct-Entry Mechanism into Metal Membranes (1995) (34)
- Mass transport effects on the electrodeposition of iron-nickel alloys at the presence of additives (1995) (33)
- Modification of Newman's BAND(J) Subroutine to Multi‐Region Systems Containing Interior Boundaries: MBAND (1991) (33)
- A New Kinetic Equation for Intercalation Electrodes (2006) (32)
- Hydrogen permeation inhibition by thin layer Zn–Ni alloy electrodeposition (1998) (32)
- An initialization subroutine for DAEs solvers: DAEIS (2001) (31)
- Electrochemical Characterization of Cobalt-Encapsulated Nickel as Cathodes for MCFC (2002) (30)
- Study of cobalt-doped lithium-nickel oxides as cathodes for MCFC (2002) (30)
- Anomalous Codeposition of Fe‐Ni Alloys and Fe ‐ Ni ‐ SiO2 Composites under Potentiostatic Conditions Experimental Study and Mathematical Model (1996) (30)
- Characterization of Hydrogen Permeation Through a Corrosion-Resistant Zinc-Nickel-Phosphorus Alloy (2000) (30)
- Development of a New Electrodeposition Process for Plating of Zn‐Ni‐X (X = Cd, P) Alloys: I. Corrosion Characteristics of Zn‐Ni‐Cd Ternary Alloys (2000) (30)
- A Mathematical Model for Electroless Copper Deposition on Planar Substrates (1999) (30)
- Parallel Plate Electrochemical Reactor Model (1983) (30)
- Optimal charge rates for a lithium ion cell (2011) (29)
- A Mathematical Model for Predicting Cyclic Voltammograms of Electronically Conductive Polypyrrole (1988) (28)
- Prediction of the Current Density at an Electrode at Which Multiple Electrode Reactions Occur under Potentiostatic Control (1983) (28)
- Electrochemical behaviour of titanium(II) and titanium(III) compounds in molten lithium chloride/ potassium chloride eutectic melts (1991) (28)
- A Mathematical Model of a Zn / Br2 Cell on Charge (1986) (28)
- A Mathematical Model of a Hydrogen/Oxygen Alkaline Fuel Cell (1991) (27)
- Cubic Spline Regression for the Open-Circuit Potential Curves of a Lithium-Ion Battery (2005) (27)
- Simulation of the Oxygen Reduction Reaction at an RDE in 0.5 M H 2 SO 4 Including an Adsorption Mechanism (2007) (27)
- The Effect of the Tribromide Complex Reaction on the Oxidation/Reduction Current of the Br2/Br– Electrode (1987) (27)
- Electric field strength effects on time-dependent passivation of metal surfaces (2002) (27)
- Low-Temperature Lithium Plating/Corrosion Hazard in Lithium-Ion Batteries: Electrode Rippling, Variable States of Charge, and Thermal and Nonthermal Runaway (2020) (26)
- Using Sputter Deposition to Increase CO Tolerance in a Proton-Exchange Membrane Fuel Cell (2002) (26)
- A mathematical model of a hermetically sealed lead-acid cell (1993) (26)
- Palladium-Microencapsulated Graphite as the Negative Electrode in Li-ion Cells (2000) (25)
- Simplified Point Defect Model for Growth of Anodic Passive Films on Iron (2002) (25)
- Electrocatalysis and the chlorine evolution reaction—II. Comparison of anode materials (1984) (25)
- A Nonisothermal Nickel‐Hydrogen Cell Model (1998) (24)
- Resistive companion battery modeling for electric circuit simulations (2001) (24)
- Self‐Discharge Model of a Nickel‐Hydrogen Cell (2000) (24)
- Symbolic solutions for boundary value problems using Maple (2000) (23)
- Electrode Kinetics of Oxygen Reduction in Lithium Carbonate Melt: Use of Impedance Analysis and Cyclic Voltammetric Techniques to Determine the Effects of Partial Pressure of Oxygen (1991) (23)
- Semianalytical Method of Solution for Solid Phase Diffusion in Lithium Ion Battery Electrodes: Variable Diffusion Coefficient (2011) (23)
- The Fluid Motion Due to a Rotating Disk (1976) (23)
- Simultaneous Reactions on a Rotating-Disk Electrode (1977) (23)
- A model for the deliverable capacity of the TiS2 electrode in a Li/TiS2 cell (1993) (23)
- Estimation of the Diffusion Coefficient and Solubility for a Gas Diffusing Through a Membrane (1990) (22)
- Semianalytical method of lines for solving elliptic partial differential equations (2004) (22)
- An Algebraic Model for a Zinc/Bromine Flow Cell (1989) (22)
- Non-destructive parameter extraction for a reduced order lumped electrochemical-thermal model for simulating Li-ion full-cells (2020) (22)
- Inhibiting Action of Calcium Nitrite on Carbon Steel Rebars (2001) (22)
- Development of a new electrokinetic technique for decontamination of hexavalent chromium from low surface charged soils (1996) (22)
- In Newman's Numerical Technique for Solving Boundary Value (1978) (22)
- A Mathematical Model of a Zinc/Bromine Flow Cell (1987) (21)
- An approximate solution for a pseudocapacitor (2004) (21)
- A Semianalytical Method for Predicting Primary and Secondary Current Density Distributions: Linear and Nonlinear Boundary Conditions (2000) (21)
- Steady-state operation of a compressor for a proton exchange membrane fuel cell system (2000) (21)
- Impedance Analysis for Oxygen Reduction in a Lithium Carbonate Melt: Effects of Partial Pressure of Carbon Dioxide and Temperature (1993) (21)
- A Two‐Dimensional Mathematical Model of a Porous Lead Dioxide Electrode in a Lead‐Acid Cell (1988) (21)
- Electrocatalysis and the chlorine evolution reaction (1983) (21)
- A Model of the Bromine/Bromide Electrode Reaction at a Rotating Disk Electrode (1983) (21)
- Parallel-Plate Electrochemical Reactor Model: A Method for Determining the Time-Dependent Behavior and the Effects of Axial Diffusion and Axial Migration (1986) (20)
- A Multi-Physics Model for Solid Oxide Iron-Air Redox Flow Battery: Simulation of Discharge Behavior at High Current Density (2014) (20)
- A five-point finite difference method for solving parabolic partial differential equations (1990) (20)
- A Comparison of Numerical Solutions for the Fluid Motion Generated by a Rotating Disk Electrode (2008) (20)
- Thermal Mathematical Modeling of a Multicell Common Pressure Vessel Nickel‐Hydrogen Battery (1992) (20)
- A Multiphase Mathematical Model of a Nickel/Hydrogen Cell (1996) (19)
- Transient Analysis of a Porous Electrode (2005) (19)
- Simulation and Analysis of Inhomogeneous Degradation in Large Format LiMn2O4/Carbon Cells (2014) (19)
- Pulverization and Corrosion Studies of Bare and Cobalt-Encapsulated Metal Hydride Electrodes (2000) (19)
- Erratum: A Mathematical Model for a Lithium-Ion Battery/Electrochemical Capacitor Hybrid System [ J. Electrochem. Soc. , 152 , A1682 (2005)] (2006) (19)
- The Role of Thallium as a Hydrogen Entry Promoter on Cathodically Polarized HY-130 Steel (1994) (18)
- The Effect of Particle Size on the Discharge Performance of a Nickel-Metal Hydride Cell (1998) (18)
- Non-Equilibrium Point Defect Model for Time-Dependent Passivation of Metal Surfaces (2001) (18)
- A finite difference procedure for solving coupled, nonlinear elliptic partial differential equations (1987) (18)
- A Robust Homotopy Continuation Method for Seeking All Real Roots of Unconstrained Systems of Nonlinear Algebraic and Transcendental Equations (2011) (18)
- Mixed Mode Growth Model for the Solid Electrolyte Interface (SEI) (2019) (17)
- Surface Treatment for Mitigation of Hydrogen Absorption and Penetration into AISI 4340 Steel (1993) (17)
- Characterization of Hydrogen Permeation Through Zinc-Nickel Alloys under Corroding Conditions: Mathematical Model and Experimental Study (1998) (17)
- Modeling the Rotating Disk Electrode for Studying the Kinetics of Electrochemical Reactions (1987) (17)
- Modeling lithium diffusion in nickel composite graphite (2001) (17)
- Model order reduction for solid-phase diffusion in physics-based lithium ion cell models (2012) (16)
- A Computer Simulation of the Oxygen Reduction Reaction in Carbonate Melts (1990) (16)
- The Effect of Heat Treatment Atmospheres on the Electrocatalytic Activity of Cobalt Tetraazaannulenes: Preliminary Results (1985) (16)
- Secondary Current Distributions Using TOPAZ2D and Linear Kinetics (1988) (16)
- Electrochemical investigations of bare and Pd-coated LaNi4.25Al0.75 electrodes in alkaline solution (1998) (16)
- Modeling of a Nickel-Hydrogen Cell: Phase Reactions in the Nickel Active Material (2001) (16)
- State of charge estimation for electrical vehicle batteries (2008) (15)
- Full Cell Mathematical Model of a MCFC (2003) (15)
- Predicting Shunt Currents in Stacks of Bipolar Plate Cells with Conducting Manifolds (1988) (15)
- Determination of Corrosion Properties of Lacquered Tinplate in Citrate Solutions by DC and AC Electrochemical Methods (1990) (15)
- A Mathematical Model for the Electrodeposition of Alloys on a Rotating Disk Electrode (1988) (15)
- Computational Analysis of Performance Limiting Factors for the New Solid Oxide Iron-air Redox Battery Operated at 550 °C (2015) (15)
- Use of a Hydrogen Anode for Nitrate Waste Destruction (1996) (15)
- In Situ Degradation of Polyhalogenated Aromatic Hydrocarbons by Electrochemically Generated Superoxide Ions (1991) (15)
- A Mathematical Model of the Self-Discharge of a Ni-H2 Battery (1991) (15)
- Use of Underpotential Deposition of Zinc to Mitigate Hydrogen Absorption into Monel K500 (1994) (14)
- Simulating Shape Changes during Electrodeposition Primary and Secondary Current Distribution (2002) (14)
- Series Solutions for Boundary Value Problems using a Symbolic Successive Substitution Method (1999) (14)
- Analysis of Molten Carbonate Fuel Cell Performance Using a Three-Phase Homogeneous Model (2003) (14)
- Potential‐Selective Deposition of Copper from Chloride Solutions Containing Iron (1977) (14)
- The self-discharge of the NiOOH/Ni(OH)2 electrode constant potential study (1992) (14)
- Parallel Plate Electrochemical Reactor Model: Material Balance Closure and a Simplification (1986) (14)
- A Simple Model for a Zinc/Bromine Flow Cell and Associated Storage Tanks (1990) (14)
- Simulation of the Polarization Curves for Oxygen Reduction at a Rotating Disk Electrode (1987) (13)
- Simulation of Polarization Curves for Oxygen Reduction Reaction in 0.5 M H2SO4 at a Rotating Ring Disk Electrode (2007) (13)
- Studies on metal hydride electrodes with different weights and binder contents (1999) (13)
- Current Distribution in a HORIZON® Lead‐Acid Battery during Discharge (1991) (13)
- Understanding the role of carbon in alkaline oxygen electrocatalysis: A case study on La0.6Sr0.4CoO3-δ/Vulcan carbon composite electrocatalyst (2019) (13)
- Ellipsometric and Raman Spectroscopic Study of Thermally Formed Films on Titanium (1997) (13)
- Estimation of Electrode Kinetic Parameters of the Lithium/Thionyl Chloride Cell Using a Mathematical Model (1989) (13)
- Thermal Analysis of Spirally Wound Li/BCX and Li / SOCl2 Cells (1993) (13)
- Capacity fade of Li-ion cells cycled at different temperatures (2002) (13)
- Impedance Analysis for Oxygen Reduction in a Lithium Carbonate Melt (1991) (13)
- Chromium Oxides and Lithiated Chromium Oxides. Promising Cathode Materials for Secondary Lithium Batteries (1999) (13)
- A mathematical model of pulse plating on a rotating disk electrode (1990) (13)
- Energy efficiency of an intermediate-temperature solid oxide iron–air redox battery (2015) (12)
- A linear time-invariant model for solid-phase diffusion in physics-based lithium ion cell models (2012) (12)
- A mathematical model for a parallel plate electrochemical reactor, CSTR, and associated recirculation system (1986) (12)
- Corrosion Behavior of 70Cu-30Ni Alloy in 0.5M NaCl and in Synthetic Seawater (1985) (12)
- Scattering of light atoms from strongly periodic surfaces (1975) (12)
- STUDIES ON GALVANIZED CARBON STEEL IN CA(OH)2 SOLUTIONS (2000) (12)
- Galvanostatic pulse and pulse reverse plating of zinc–nickel alloys from sulfate electrolytes on a rotating disc electrode (1996) (12)
- Simulation of Reduction of Cr(VI) by Fe(II) Produced Electrochemically in a Parallel-Plate Electrochemical Reactor (2009) (12)
- Modeling Parametric Uncertainty Using Polynomial Chaos Theory (2007) (12)
- Parameter Sensitivity and Optimization Predictions of a Hydrogen/Oxygen Alkaline Fuel Cell Model (1992) (12)
- Cobalt doped chromium oxides as cathode materials for secondary lithium batteries (1999) (12)
- The underpotential deposition of zinc for mitigation of hydrogen absorption and penetration into HY-130 steel (1994) (12)
- Simple Models for Diaphragm‐Type Chlorine/Caustic Cells I . Dynamic Behavior (1986) (12)
- Electroplating of Thin Films of Bismuth onto Type 4340 Steel and Alloy 718 to Prevent Hydrogen Embrittlement (1995) (11)
- Optical Spectra of Pu in CaF2 (1968) (11)
- The Effects of Organic Compounds on Inhibition of Hydrogen Permeation Through a Mild Steel Membrane (1997) (11)
- One implementation variant of the finite difference method for solving ODEs/DAEs (2004) (11)
- Electrochemical Investigations of Cobalt-Doped LiMn2O4 as Cathode Material for Lithium-Ion Batteries. (2010) (10)
- A Mathematical Model of Electrochemical Reactions Coupled with Homogeneous Chemical Reactions (1991) (10)
- Parameter Estimates for a Polymer Electrolyte Membrane Fuel Cell Cathode (2013) (10)
- A Novel Electrochemical Method for the Detection of Nerve Gases (1999) (10)
- Unraveling Oxygen Electrocatalysis Mechanisms on a Thin-Film Oxygen-Deficient Perovskite La0.6Sr0.4CoO3−δ (2018) (10)
- Mathematical modeling of the LiAl/FeS2 high temperature battery system (2012) (10)
- Analysis of electrokinetic data by parameter estimation and model discrimination techniques (1988) (10)
- Organic Compounds as Effective Inhibitors for Hydrogen Permeation of Type 1010 Steel (1998) (10)
- Simulating Charge Transport in Solid Oxide Mixed Ionic and Electronic Conductors: Nernst-Planck Theory vs Modified Fick's Law (2016) (10)
- Using Parameter Estimation Techniques with a Simple Model of a Diaphragm-Type Electrolyzer to Predict the Electrical Energy Cost for NaOH Production (1985) (9)
- Polymer electrolyte membrane resistance model (2006) (9)
- Nonlinear State-Variable Method for Solving Physics-Based Li-Ion Cell Model with High-Frequency Inputs (2017) (9)
- Modern Aspects of Electrochemistry No.22 (1992) (9)
- Modern aspects of electrochemistry No. 18 (1986) (9)
- Heat Balance in a Planar Solid Oxide Iron-Air Redox Battery: A Computational Analysis (2015) (9)
- Industrial membrane processes (1986) (9)
- Modern Aspects of Electrochemistry No. 36 (2004) (9)
- Extension of Darby's Model of a Hydrophylic Gas Fed Porous Electrode (1984) (9)
- Linear Algebra Used to Determine Independent Half‐Cell Equations (1996) (9)
- Zn/Br2 cell: Effects of plated zinc and complexing organic phase (1991) (8)
- A Finite-Difference Method for Pseudo-Two-Dimensional Boundary Value Problems (1994) (8)
- A Finite Element Model of Bipolar Plate Cells (1984) (8)
- Diffusion of a gas through a membrane (1992) (8)
- The Effects of Multiple Electroplated Zinc Layers on the Inhibition of Hydrogen Permeation Through an Iron Membrane (1996) (8)
- Extension of Newman’s Numerical Technique To Pentadiagonal Systems Of Equations (1984) (8)
- Predicted Secondary Current Distributions for Linear Kinetics in a Modified Three‐Dimensional Hull Cell (1990) (8)
- Reduction of Chromium (VI) when Solar Selective Black Chromium is Deposited in the Presence of Organic Additive (1992) (8)
- Thermal Runaway Propagation Assessment of Different Battery Pack Designs Using the TF5 Draft as Framework (2019) (8)
- A semi-analytical solution method for linear partial differential equations (1992) (8)
- Electrodeposition of cobalt tetraazaannulene on graphite electrodes (1983) (8)
- Analysis of Performance Limiting Factors in Solid-Oxide Iron-Air Redox Battery Operated with Different Redox Couples (2015) (7)
- Electrodeposition of iron-nickel alloys in the presence of organic additives (1994) (7)
- Three‐Dimensional Current Distributions in a Bipolar, Chlor‐Alkali Membrane Cell (1990) (7)
- Mathematical model of a lithium/polypyrrole cell (1990) (7)
- A Modified Electrochemical Process for the Decomposition of Hydrogen Sulfide in an Aqueous Alkaline Solution. (1991) (7)
- Capacity fade studies on spinel based Li-ion cells (2002) (7)
- Electrocatalysis and the oxygen evolution reaction (1984) (7)
- A Steady-State Impedance Model for a PEMFC Cathode [J. Electrochem. Soc., 151, E133 (2004)] (2005) (7)
- Preparation of Iron Phthalocyanine Catalyzed Carbon Electrodes by Chemical Modification (1984) (7)
- Electrochemical engineering applications (1987) (6)
- Resistive companion modeling of batteries in a virtual test bed (2005) (6)
- On the design of a simple solver for nonlinear two-point boundary value problems (1990) (6)
- Investigation of Transport and Kinetic Nonideality in Solid Li-Ion Electrodes through Deconvolution of Electrochemical Impedance Spectra (2020) (6)
- Autocatalytic deposition of Ni-TM-P alloys (1990) (6)
- Modeling of batteries and fuel cells; Proceedings of the Symposium, Phoenix, AZ, Oct. 13-19, 1991 (1991) (6)
- Simple Models for Diaphragm‐Type Chlorine/Caustic Cells II . Effect of Acidic Anolyte on Steady‐State Caustic Yield (1986) (6)
- Impedance Spectroscopy as a Nondestructive Health Interrogation Tool for Lithium‐BCX Cells (1993) (6)
- Comprehensive treatise of electrochemistry. Vol. 8: experimental methods in electrochemistry (1984) (6)
- Surface Treatment for Inhibition of Corrosion and Hydrogen Penetration of Type 718 Alloy (1994) (6)
- Modern Aspects of Electrochemistry No. 20 (1989) (6)
- SECONDARY BATTERIES – LITHIUM RECHARGEABLE SYSTEMS – LITHIUM-ION | Lifetime Prediction (2009) (6)
- Scattering of argon and Neon from W(112) (1976) (6)
- Surface treatment for mitigation of hydrogen absorption and penetration into AISI 4340 steel and Inconel 718 alloy (1995) (6)
- Proceedings of the Symposium on Modeling of Batteries and Fuel Cells (1991) (6)
- Understanding the High-Temperature Solid-Oxide Iron-Air Redox Battery Operated with an Oxygen Shuttle Mechanism: A Computational Study (2015) (6)
- One-Dimensional Modeling of a Liquid Tin Anode Solid Oxide Fuel Cell (2009) (5)
- A perovskite/noble-metal composite as a bifunctional oxygen electrocatalyst for alkaline electrochemical cells (2019) (5)
- Mathematical Model for Li-S Cell with Shuttling-Induced Capacity Loss Approximation (2020) (5)
- Application of Newman's Technique to Coupled, Nonlinear Partial Differential Equations (1980) (5)
- Optimization and extension of pentadiagonal band(J) solver to multiregion systems containing interior boundaries (1991) (5)
- A Sulfate Solution for Deposition of Ni-Cr-P Amorphous Alloys (1992) (5)
- Simulation and Analysis of Inhomogeneous Degradation in Large Format LiMn 2 O 4 / Carbon Cells (2014) (5)
- Electrodeposition & characterization of a corrosion resistant zinc-nickel-phosphorus alloy (1999) (5)
- Modeling the Effects of Ion Association on Direct‐Current Polarization of Solid Polymer Electrolytes (2000) (5)
- Diaphragm Cell Measurement of Mutual Diffusion Coefficients for Potassium Hydroxide in Water from 1 °C to 25 °C (1998) (5)
- An Analysis of a Back Fed Porous Electrode for the Br2 / Br − Redox Reaction (1983) (5)
- Series Solution to the Transient Convective Diffusion Equation for a Rotating Disk Electrode (2004) (5)
- Modeling the Effects of Ion Association on Alternating Current Impedance of Solid Polymer Electrolytes (2002) (5)
- Electrochemical Production of Hydrogen and Sulfur by Low‐Temperature Decomposition of Hydrogen Sulfide in an Aqueous Alkaline Solution. (1990) (5)
- A procedure for serial simulation of electrochemical processes: cycling of electrodes and batteries (2001) (5)
- An Adaptive Reduced-Order-Modeling Approach for Simulating Real-Time Performances of Li-Ion Battery Systems (2017) (4)
- Estimating parameters from rotating ring disc electrode measurements (2017) (4)
- A Simple Method for Determining Differential Diffusion Coefficients from Aqueous Electrolyte Diaphragm Cell Data at Temperatures Below 0°C (1999) (4)
- Experimental methods in electrochemistry (1984) (4)
- Method of Lines for Parabolic Partial Differential Equations (2010) (4)
- Electrochemical Behavior of Graphite and Ni‐Cr Electrodes in Sodium Polysulfide in the Absence and Presence of Hydrogen Sulfide (1990) (4)
- A Finite Length Cylinder Model for Mixed Oxide-Ion and Electron Conducting Cathodes Suited for Intermediate-Temperature Solid Oxide Fuel Cells (2016) (4)
- Utility of an Empirical Method of Modeling Combined Zero Gap/Attached Electrode Membrane Chlor‐Alkali Cells (1987) (4)
- Extension of Newman’s method to electrochemical reaction–diffusion in a fuel cell catalyst layer (2002) (4)
- Mathematical Modeling of an H2S Removal Electrolyzer (1990) (3)
- Thermal Characteristics of a Nickel-Hydrogen Battery (1994) (3)
- Mathematical modeling of electrodeposition (2000) (3)
- Modern Aspects of Electrochemistry, No. 45 (2009) (3)
- A Reduced-Order Lumped Model for Li-Ion Battery Packs during Operation (2021) (3)
- A Comparison of Newman's Numerical Technique and deBoor's Algorithm (1989) (3)
- Publisher’s Note: Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior [ J. Electrochem. Soc. , 158 , A122 (2011) ] (2011) (3)
- High-Temperature Sodium | Metal Chloride Storage Battery (2008) (3)
- Considerations for the Thermal Modeling of Lithium-Ion Cells for Battery Analysis (2016) (3)
- Corrosion Effects of Stabilized Backfill on Steel Reinforcement (1998) (3)
- Model Reduction via Proper Orthogonal Decomposition for the Lithium Ion Battery (2008) (3)
- Electrochemical cell design (1984) (3)
- Discharge behaviour of tubular lead dioxide electrodes Part III: Two-dimensional current density distribution (1995) (3)
- Applications of Electrochemistry and Nanotechnology in Biology and Medicine II (2012) (3)
- Electrochemical Materials Science (2013) (3)
- Bulk thermal capacity determination for Li/BCX and Li/SOCl2 cells (1992) (3)
- Comparison of Thermal-Electrochemical Model Predictions with Experimental Data of Lithium-Ion Batteries (2007) (3)
- Modern Aspects of Electrochemistry No. 40 (2007) (3)
- A Mathematical Model for the Initial Corrosion Rate of a Porous Layer on a Rotating Disk Electrode (1987) (3)
- A new method for solving initial value problems (2013) (3)
- A semianalytical technique for solving nonlinear partial differential equations (1996) (3)
- Nonlinear State-Variable Method (NSVM) for Li-Ion Batteries: Finite-Element Method and Control Mode (2017) (3)
- Mathematical modeling of a nickel/hydrogen cell (1996) (3)
- Mathematical Modeling of Lithium Ion Batteries (2008) (2)
- Modelling A Nickel Cadmium Battery As A Homogeneous Device (1990) (2)
- A study of the stability of Ni-Cr-P plating solutions (1992) (2)
- A Simple Model of Exxon’s Zn/Br 2 Battery (1984) (2)
- Electrochemical Impedance Spectroscopy of Liquid Tin Anode Solid Oxide Fuel Cell (2011) (2)
- ELECTROCATALYSIS AND THE CHLORINE EVOLUTION REACTION ‐ II. COMPARISON OF ANODE MATERIALS (1984) (2)
- Simplified Thermal Runaway Model for Assisting the Design of a Novel Safe Li-Ion Battery Pack (2022) (2)
- Efficient Modeling for a Lithium-Ion Battery Using the Proper Orthogonal Decomposition and the Orthogonal Collocation on Finite Elements (2010) (2)
- Fundamental Modeling of Chloride Diffusion in Concrete (1996) (2)
- Mathematical modeling of capacity fade mechanisms in lithium-ion batteries : Lithium deposition overcharge reaction on the negative electrode (1999) (2)
- Porous Cathode Transient One Dimensional Model of a Liquid Tin Anode Solid Oxide Fuel Cell (2011) (2)
- hermodynamic model development for lithium intercalation electrodes (2008) (2)
- A Superoxide Involved Oxygen Reduction Reaction Mechanism on a Glassy Carbon Electrode in Caustic Media (2020) (2)
- Continuum and Statistical Mechanics-Based Models for Solid—Electrolyte Interphases in Lithium-Ion Batteries (2005) (1)
- Electrocatalytic Reactor Design (2010) (1)
- Thermal Characteristics of a Nickel-Hydrogen Battery. (1994) (1)
- Parameter Evaluation of ORR at a RRDE (2008) (1)
- Simulation of a Parallel Plate Electrochemical Reactor Used to Remove Cr(VI)via Electrocoagulation Method (2008) (1)
- Preliminary Investigation on the Corrosion Behavior of Amorphous (Ti 90 Ru 10 ) 87 Si 13 in Saline Solutions (1989) (1)
- Comparison of Heat‐Fin Materials and Design of a Common‐Pressure‐Vessel Nickel‐Hydrogen Battery (1992) (1)
- A mathematical model of the maximum power density attainable in an alkaline hydrogen/oxygen fuel cell. Final Report (1991) (1)
- Development of carbon metal oxide supercapacitors by electroless deposition (1999) (1)
- Equilibrium characteristics of tartrate and EDTA-based electroless copper deposition baths (1997) (1)
- Short-Time Transient Analysis of Intercalation of an Ion into a Sphere (2007) (1)
- Understanding Power Enhancement of SOFC by Built-in Chemical Iron Bed: A Computational Approach (2017) (1)
- Electrochemical-Thermal Modeling of Spirally Wound Batteries (2009) (1)
- Ni-Cr-P plating bath analysis by ion chromatography (1990) (1)
- Ni-Cr-P plating bath characterization by ion chromatography (1991) (1)
- Laplace Transform Technique for Partial Differential Equations (2010) (1)
- Automated Methods of Corrosion Measurement (2002) (1)
- Liquid Metal Anode for JP-8 Fuel Cell (2009) (1)
- of models for predicting the cycling performance of lithium ion batteries (2006) (1)
- OPTIMIZATION OF THE CATHODE LONG-TERM STABILITY IN MOLTEN CARBONATE FUEL CELLS: EXPERIMENTAL STUDY AND MATHEMATICAL MODELING (2000) (1)
- Texas A&M University Marine Corrosion Facility, Galveston, Texas. (1985) (1)
- Method of Lines for Elliptic Partial Differential Equations (2010) (1)
- Stress Analysis in Lithium Intercalation Electrodes (2009) (1)
- Condensation of Refrigerant Vapors—Apparatus and Film Coefficients for Freon-12 (1948) (1)
- Anodic oxidation of tetrasodium ethylenediaminetetraacetic acid in alkaine solutions (1995) (1)
- Chemical characterization of electroless Ni-Mo-P alloys (1992) (1)
- Electrochemical Production and Corrosion Testing of Amorphous Ni-P. (1989) (1)
- Measurements of the Fundamental Thermodynamic Parameters of Li/BCX and Li / SOCl2 Cells (1992) (1)
- Dip-Coating of Carbon Fibers for the Development of Lithium Iron Phosphate Electrodes for Structural Lithium-Ion Batteries (2022) (0)
- Optimization of Cobalt Doped Chromium Oxide as Cathode Material for Secondary Lithium Batteries (1999) (0)
- Oxygen electrode in molten carbonate fuel cells: Second quarterly technical progress report, (November 1, 1987-January 31, 1988) (1988) (0)
- Partial Differential Equations in Semi-infinite Domains (2010) (0)
- Synthesis, Characterization and Testing of Novel Anode and Cathode Materials for Li-Ion Batteries (2002) (0)
- Oxygen electrode in molten carbonate fuel cells: Fourth quarterly technical progress report, May 1--July 31, 1988 (1988) (0)
- Errata: “Mathematical Model of a Direct Methanol Fuel Cell” [J. Fuel Cell Sci. Tech.1 (1), pp. 43–48 (2004)] (2012) (0)
- Performance of a Battery-Capacitor Hybrid Power System under Pulse Loads (2010) (0)
- Degradation Analysis in Lithium-ion Batteries using Electrochemical Impedance Spectroscopy (2007) (0)
- Proceedings of the Douglas N. Bennion Memorial Symposium : topics in electrochemical engineering (1994) (0)
- Pack Level Modeling of Lithium-Ion Batteries (2011) (0)
- Mathematical Modeling of Electronically Conductive Polypyrrole (1989) (0)
- Modelling Venting and Pressure Build-up in a 18650 LCO Cell during Thermal Runaway (ABSTRACT) (2016) (0)
- Preliminary Investigation on the Corrosion Behavior of Amorphous (Ti90Ru10)87Si13 in Saline Solutions. (1989) (0)
- Single Particle Thermal Model for Lithium Ion Cells (2008) (0)
- Short communication Capacity fade analysis of a lithium ion cell (2008) (0)
- Mathematical modeling of a nickel/metal-hydride cell (2008) (0)
- Calorimetric determination of the thermoneutral potential for Li/BrCl in SOCl2 (BCX) cells (1991) (0)
- State of Charge Estimation of a Lithium-Ion Cell under Low Earth Orbit Conditions Using Kalman Filtering Approaches (2012) (0)
- Chromium Oxides and Lithiated Chromium Oxides. Promising Cathode Materials for Secondary Lithium Batteries. (1999) (0)
- Low Temperature Li Plating and Corrosion Safety Hazard in Li-Ion Batteries (2020) (0)
- Control and Estimation of Uncertain Parameters in Lithium-Ion Battery Packs (2010) (0)
- An Analysis of a Back Fed Porous Electrode for the BrJBr Reaction (2011) (0)
- Safe, High Power/Voltage Battery Module Design Challenges (2019) (0)
- Optimization of the lithium/thionyl chloride battery (1987) (0)
- Transient One Dimensional Model of a Liquid Tin Anode Solid Oxide Fuel Cell (2010) (0)
- Vittorio de Nora Award) Mathematical Modeling of Electrochemical Systems (2016) (0)
- Oxygen electrode in molten carbonate fuel cells. Fifth quarterly technical progress report, August 1--October 31, 1988 (1988) (0)
- Higher corrections of the Ilkovich equation (2022) (0)
- A Simple Method for Determining Differential Diffusion Coefficients from Aqueous Electrolyte Diaphragm Cell Data at Temperatures Below 0 (2014) (0)
- Synthesis and characterization of chromium oxides and cobalt doped chromium oxides as cathode materials for lithium batteries (1999) (0)
- Boundary Value Problems (2010) (0)
- Title : Optimization of the Cathode Long-Term Stability in Molten Carbonate Fuel Cells : Experimental Study and Mathematical Modeling Type of Report : Semiannual Progress Report Reporting Period Start Date : April 1 , 2001 Reporting Period End (2002) (0)
- Calorimetric determination of the thermoneutral potential of Li/BCX and Li/SOCl2 cells (1992) (0)
- Electrodeposition of Copper-Nickel Alloys from Citrate Solutions on a Rotating Disk Electrode. Part 1. Experimental Results. Part 2. Mathematical Modeling. (1989) (0)
- Development of high performance metal hydride alloys by cobalt microencapsulation (1999) (0)
- Calorimetric determination of thermal parameters of the Li/BrCl in SOCl/sub 2/ (BCX) chemistry (1990) (0)
- Flowsheet model for the electrochemical treatment of liquid radioactive wastes. Final report (1995) (0)
- Simple model of Exxon's Zn/Br sub 2 battery (1983) (0)
- Initial Value Problems (2010) (0)
- Life Modeling of Lithium Ion Batteries (2007) (0)
- A mathematical model of a CuO/Cu Vaporvolt cell (1992) (0)
- Modeling of On-Board Fuel Cell Power Plants (2002) (0)
- Oxygen electrode in molten carbonate fuel cells: Third quarterly technical progress report, February 1-April 30, 1988 (1988) (0)
- Simulation of a Parallel Plate Electrochemical Reactor to Remove Cr(VI) (2007) (0)
- Synthesis and Characterization of Impurity‐Free Li 6/16 Sr 7/16 Ta 3/4 Hf 1/4 O 3 Perovskite as a Solid‐State Lithium‐Ion Conductor (2023) (0)
- Surface Treatment of Hydrogen Absorption Into Alloys (1993) (0)
- Adsorption and Absorption of Hydrogen in Metals FTIR and RT Approach (1992) (0)
- Underpotential Deposition of Zinc for Mitigation of Hydrogen Absorption and Penetration into HY-130 Steel. (1995) (0)
- Electrochemical Analysis Of Surfactants For Microemulsion Flooding (1980) (0)
- New secondary batteries utilizing electronically conductive polymer cathodes. Final report, 1 September 1986-31 August 1987 (1989) (0)
- Basic Engineering Research for D and D of R Reactor Storage Pond Sludge: Electrokinetics, Carbon Dioxide Extraction, and Supercritical Water Oxidation (2002) (0)
- Predicted Secondary Current Distributions for Linear Kinetics in a Modified Thr ee-Dimensional (1990) (0)
- Oxygen electrode in molten carbonate fuel cells: First quarterly technical progress report (1987) (0)
- A Mathematical Model Of The Self Discharge Process Of The Ni/H/sub2/ Battery (1990) (0)
- Partial Differential Equations in Finite Domains (2010) (0)
- Mathematical Modeling of LiAl/FeS2 Molten Salt High Temperature Battery System (2011) (0)
- Life Modeling of Lithium Ion Cells (2008) (0)
- VI.G.1 Clean Energy Research (2005) (0)
- Progress report on the evaluation of porous cathode for the electrochemical reduction of nitrates and nitrites in liquid wastes (1995) (0)
- The Self‐Discharge of the NiOOH/Ni(OH)2 Electrode. Constant Potential Study. (1992) (0)
- A Simple Model of a Diaphragm-Type Chlorine Cell (1984) (0)
- Mathematical modeling of a thermovoltaic cell (1992) (0)
- Oxygen Reduction on Silver in 6 . 5 Molar Caustic Soda Solution (2014) (0)
- Development of novel cathode materials for Li-ion batteries (1998) (0)
- Impedance analysis for oxygen reduction in lithium carbonate melt: Effect of partial pressure of oxygen (1989) (0)
- Cementation of Copper from acidic sulfate electrolytes on nickel-plated steel (1991) (0)
- Response to letter written by: P. Cruz, J.C. Santos, F.D. Magalhaes, A. Mendes to "Comparison of finite difference and control volume methods for solving differential equations, by G.G. Botte, J.A. Ritter, R.E. White, 24 (2000) 2633-2654" (2005) (0)
- Characterization of amorphous Ni-Cr-P electrodeposits (1993) (0)
- Lawrence Berkeley National Laboratory Recent Work Title Exploratory Technology Research Program for Electrochemical Energy Storage-Annual Report for 1996 Permalink (2013) (0)
- The Electrochemical Behavior of Graphite and Ni-Cr Electrodes in Sodium Polysulfide in the Absence and Presence of Hydrogen Sulfide (1990) (0)
- Computational Analysis of Dynamic Tubular SOFC with a Built-in Chemical Iron Bed (2017) (0)
- Anodic Behavior of Titanium in the Presence of Titanium(III) Chloride in Molten Lithium Chloride-Potassium Chloride Eutectic Melts (1992) (0)
- Metal chelate catalysts for fuel cells. Final report June 1979 - October 1982 (1982) (0)
- 2013 Olin Palladium Award Address) Mathematical Modeling of Lithium Ion Cells and Batteries (2013) (0)
- Mathematical Model for SEI Growth under Open-Circuit Conditions (2022) (0)
- POTENTIAL-SELECTIVE DEPOSITION OF COPPER FROM CHLORIDE SOLUTIONS CONTAINING IRON (1977) (0)
- Metal chelate catalysts for fuel cells. Annual report Jul 80-Jun 81 (1981) (0)
- Physics-based lithium ion silver vanadium oxide cathode model (2011) (0)
- Comparison of Model Predictions with Experimental Data from Lithium-ion Battery/Electrochemical Capacitor Hybrid System (2006) (0)
- Modeling of Power Systems for Marines (2003) (0)
- Distributed Thermal Model for Lithium-Ion Battery (2012) (0)
- Hydrogen anode for nitrate waste destruction. Revision 2 (1996) (0)
- A Simulink-Based Graphical User Interface for Electrochemical Simulation of Power Sources (2006) (0)
- DESIGN OF FLOWFIELDS FOR FUEL CELLS (2017) (0)
- OXYGEN REDUCTION IN A CAUSTIC SOLUTION USING A GAS-FED POROUS ELECTRODE (1985) (0)
- Reduction of Chromium(VI) When Solar Selective Black Chromium is Deposited in the Presence of Organic Additive. (1992) (0)
- Mathematical Modeling of Ni/H2 and Li-Ion Batteries (2001) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Ralph E. White?
Ralph E. White is affiliated with the following schools:
