Robert A. Varin
Polish-Canadian scientist
Robert A. Varin's AcademicInfluence.com Rankings

Download Badge
Chemistry
Robert A. Varin's Degrees
- Bachelors Chemistry University of Warsaw
- PhD Materials Science McGill University
Why Is Robert A. Varin Influential?
(Suggest an Edit or Addition)According to Wikipedia, Robert Andrzej Varin is a Polish-Canadian scientist, Professor of technical sciences, specialist of materials science and engineering. Academic career He studied at the Faculty of Power and Aeronautical Engineering of Warsaw University of Technology and then at the State Technical School of Thermal Processing. Then he received his master’s degree in Metal Science and Heat Treatment , and a Doctorate of Technical Sciences in Materials Science and Engineering from the Faculty of Mechanical Engineering and Technology at the Warsaw University of Technology. His doctoral dissertation Electron microscopy examination of grain boundary structure in copper was supervised by Prof. Maciej Władysław Grabski. Assistant Professor at the Institute of Materials Science and Engineering, Warsaw University of Technology . Postdoctoral fellow in the Department of Mechanical Engineering at the University of Manitoba in Winnipeg , and then a research associate there . Principal fellow and professorial fellow at the University of Wollongong, Australia , respectively.
Robert A. Varin's Published Works
Published Works
- Nanomaterials for Solid State Hydrogen Storage (2008) (346)
- Photocatalytic activity of hydrogenated TiO2. (2013) (246)
- Particle size, grain size and γ-MgH2 effects on the desorption properties of nanocrystalline commercial magnesium hydride processed by controlled mechanical milling (2006) (229)
- Particle size effects on the desorption properties of nanostructured magnesium dihydride (MgH2) synthesized by controlled reactive mechanical milling (CRMM) (2006) (128)
- Intermetallic-reinforced light-metal matrix in-situ composites (2002) (92)
- Magnesium silicide intermetallic alloys (1993) (79)
- Investigation of the hydrogen desorption properties of Mg + 10 wt.%X (X = V, Y, Zr) submicrocrystalline composites (2006) (72)
- The effects of time and temperature on the arrangement of anodic aluminum oxide nanopores (2014) (67)
- The effect of sequential and continuous high-energy impact mode on the mechano-chemical synthesis of nanostructured complex hydride Mg2FeH6 (2005) (65)
- A Review of Recent Advances on the Effects of Microstructural Refinement and Nano-Catalytic Additives on the Hydrogen Storage Properties of Metal and Complex Hydrides (2010) (63)
- Catalytic effects of various forms of nickel on the synthesis rate and hydrogen desorption properties of nanocrystalline magnesium hydride (MgH2) synthesized by controlled reactive mechanical milling (CRMM) (2007) (60)
- Controlled mechano-chemical synthesis of nanostructured ternary complex hydride Mg2FeH6 under low-energy impact mode with and without pre-milling (2004) (59)
- Formation and environmental stability of nanocrystalline and amorphous hydrides in the 2Mg–Fe mixture processed by controlled reactive mechanical alloying (CRMA) (2004) (58)
- Spreading of Extrinsic Grain Boundary Dislocations in Austenitic Steel (1979) (57)
- Synthesis and hydrogen desorption properties of nanocomposite magnesium hydride with sodium borohydride (MgH2 + NaBH4) (2007) (54)
- Decomposition behavior of unmilled and ball milled lithium alanate (LiAlH4) including long-term storage and moisture effects (2010) (54)
- Effect of annealing on the microstructure, ordering and microhardness of ball milled cubic (L12) titanium trialuminide intermetallic powder (1999) (51)
- The effects of nanometric nickel (n-Ni) catalyst on the dehydrogenation and rehydrogenation behavior of ball milled lithium alanate (LiAlH4) / (2010) (51)
- IN SITU INVESTIGATION OF THE EARLY STAGES OF PLASTIC DEFORMATION IN AN AUSTENITIC STAINLESS STEEL (1984) (49)
- Characterization of nanocrystalline Fe–45 at% Al intermetallic powders obtained by controlled ball milling and the influence of annealing (1999) (49)
- A new nanonickel catalyst for hydrogen storage in solid-state magnesium hydrides (2011) (49)
- The effects of the micrometric and nanometric iron (Fe) additives on the mechanical and thermal dehydrogenation of lithium alanate (LiAlH4), its self-discharge at low temperatures and rehydrogenation (2012) (47)
- The effects of nanonickel additive on the decomposition of complex metal hydride LiAlH4 (lithium alanate) (2011) (47)
- Structure and compression behaviour of the L12Al5CuTi2 intermetallic compound (1989) (47)
- Spreading of Extrinsic Grain Boundary Dislocations in Plastically Deformed Aluminium (1978) (43)
- Porous graded FeAl intermetallic foams fabricated by sintering process using NaCl space holders (2015) (42)
- Hydrogen desorption properties of MgH2 nanocomposites with nano-oxides and Inco micrometric- and nanometric-Ni (2007) (42)
- The effects of ball milling and nanometric nickel additive on the hydrogen desorption from lithium borohydride and manganese chloride (3LiBH4 + MnCl2) mixture (2010) (40)
- Nanocrystalline and non-crystalline hydrides synthesized by controlled reactive mechanical alloying/milling of Mg and Mg–X (X = Fe, Co, Mn, B) systems (2005) (40)
- Structure and properties of the Fe3Al-type intermetallic alloy fabricated by laser engineered net shaping (LENS) (2016) (39)
- Mechano-chemical activation synthesis (MCAS) of nanocrystalline magnesium alanate hydride [Mg(AlH4)2] and its hydrogen desorption properties (2007) (38)
- Plasticity of structural intermetallic compounds (1991) (38)
- Mechanical alloying and electronic simulations of 2Mg-Fe mixture powders for hydrogen storage (2006) (36)
- The effects of ball milling and molar ratio of LiH on the hydrogen storage properties of nanocrystalline lithium amide and lithium hydride (LiNH2 + LiH) system (2010) (35)
- Structural stability of sodium borohydride (NaBH4) during controlled mechanical milling (2005) (34)
- The effect of chromium (III) oxide (Cr2O3) nanopowder on the microstructure and cyclic hydrogen storage behavior of magnesium hydride (MgH2) (2011) (34)
- Mechanochemical synthesis of nanostructured chemical hydrides in hydrogen alloying mills (2007) (33)
- Overview of processing of nanocrystalline hydrogen storage intermetallics by mechanical alloying/milling (2002) (32)
- Microstructural evolution during controlled ball milling of (Mg2Ni+MgNi2) intermetallic alloy (2003) (32)
- Thermal stability of Vale Inco nanonometric nickel as a catalytic additive for magnesium hydride (MgH2) (2009) (32)
- Synthesis of nanocomposite hydrides for solid-state hydrogen storage by controlled mechanical milling techniques (2009) (31)
- Coating of graphite fibers with tungsten carbide using solid and liquid copper as a transfer medium (1988) (31)
- Grain boundary diffusion and free energy during the recrystallization of type 316 stainless steel (1984) (31)
- Analytical treatment of grain boundary sources for dislocations (1987) (31)
- Carbon fibres coated with titanium carbide using the liquid metal transfer agent technique (1989) (31)
- Fast and slow dehydrogenation of ball milled lithium alanate (LiAlH4) catalyzed with manganese chloride (MnCl2) as compared to nanometric nickel catalyst (2011) (31)
- Mechano-chemical activation synthesis (MCAS) of disordered Mg(BH4)2 using NaBH4 (2008) (30)
- Synthesis of nanocrystalline magnesium diboride (MgB2) metallic superconductor by mechano-chemical reaction and post-annealing (2006) (30)
- Fracture toughness of intermetallic compacts consolidated from nanocrystalline powders (2001) (29)
- Application of controlled and electrical discharge assisted mechanical alloying for the synthesis of nanocrystalline MgB2 superconducting compound (2004) (28)
- The effect of MgNi2 intermetallic compound on nanostructurization and amorphization of Mg-Ni alloys processed by controlled mechanical milling (2003) (28)
- Environmental degradation by hydrolysis of nanostructured β-MgH2 hydride synthesized by controlled reactive mechanical milling (CRMM) of Mg (2004) (28)
- On the possible changes in a grain boundary structure during recrystallization and grain growth (1980) (27)
- The effect of ball milling under hydrogen and argon on the desorption properties of MgH2 covered with a layer of Mg(OH)2 (2010) (26)
- Processing and fabrication of advanced materials XI : proceedings of a symposium organized by ASM International, Materials Park, Ohio, USA, 7-10 October 2002, Columbus, Ohio, USA (2003) (26)
- Microhardness and compressive mechanical behavior of L12 titanium trialuminides (1993) (25)
- Combined effects of molar ratio and ball milling energy on the phase transformations and mechanical dehydrogenation in the lithium amide-magnesium hydride (LiNH2 + nMgH2)(n = 0.5–2.0) nanocomposites (2013) (25)
- Control of annealing twins in type 316 austenitic stainless steel (1987) (25)
- Microstructure and ordering of L12 titanium trialuminides (1992) (25)
- Cold-work induced phenomena in B2 FeAl intermetallics (2002) (24)
- The effects of nitrogen content and twin boundaries on the yield strength of various commercial heats of type 316 austenitic stainless steel (1988) (24)
- Phase equilibria and intermetallic phases in the Ni-Si-Mg ternary system (2001) (23)
- Structural changes in a ferritic heat-resistant steel after long-term service (1984) (23)
- The effects of graphite on the reversible hydrogen storage of nanostructured lithium amide and lithium hydride (LiNH2 + 1.2LiH) system (2011) (23)
- Grain boundary character distribution in B2 intermetallics (2000) (22)
- Processing by controlled mechanical milling of nanocomposite powders Mg + X (X = Co, Cr, Mo, V, Y, Zr) and their hydrogenation properties (2005) (22)
- Feasibility study of the direct mechano-chemical synthesis of nanostructured magnesium tetrahydroaluminate (alanate) [Mg(AlH4)2] complex hydride (2005) (21)
- Rapid hydrogenation at 30 °C of magnesium (Mg) and iron (Fe) nanocomposite obtained through a decomposition of Mg2FeH6 precursor (2011) (21)
- The effect of titanium on the mechanical properties of the cubic modifications of Al3Ti intermetallic compound (1991) (21)
- Multi-axial forging of Fe3Al-base intermetallic alloy and its mechanical properties (2017) (21)
- Carbon fibers coated with chromium carbide using the liquid metal transfer agent technique (1989) (21)
- Nanocrystalline intermetallic compounds in the Ni–Al–Cr system synthesized by mechanical alloying and their thermodynamic analysis (2013) (20)
- Mechano-chemical synthesis of manganese borohydride (Mn(BH4)2) and inverse cubic spinel (Li2MnCl4) in the (nLiBH4 + MnCl2) (n = 1, 2, 3, 5, 9 and 23) mixtures and their dehydrogenation behavior (2012) (20)
- The effects of the nanometric interstitial compounds TiC, ZrC and TiN on the mechanical and thermal dehydrogenation and rehydrogenation of the nanocomposite lithium alanate (LiAlH4) hydride (2014) (20)
- Investigation of milling energy input on structural variations of processed olivine powders for CO2 sequestration (2015) (19)
- Compression ductility and fracture of boron-free and highly boron-doped Al5CuTi2 intermetallic compound (1990) (18)
- The effect of extrinsic grain boundary dislocations with unrelaxed and relaxed cores on the state of random boundaries in an austenitic steel (1981) (18)
- The effect of milling energy input during mechano-chemical activation synthesis (MCAS) of the nanocrystalline manganese borohydride (Mn(BH4)2) on its thermal dehydrogenation properties (2014) (18)
- Formation of nanocrystalline cubic (L12) titanium trialuminide by controlled ball milling (1998) (17)
- Progress in Hydrogen Storage in Complex Hydrides (2013) (17)
- The composites of magnesium hydride and iron-titanium intermetallic (2011) (16)
- Structure of as cast L12 compounds in Al3Zr — Base alloys containing Cu and Mn (1991) (16)
- Indentation microcracking and toughness of newly discovered ternary intermetallic phases in the NiSiMg system (1998) (16)
- The effect of boron and thermomechanical treatment on the properties of ultrafine-grained type 316 stainless steel (1985) (15)
- Synthesis of amorphous manganese borohydride in the (NaBH4–MnCl2) system, its hydrogen generation properties and crystalline transformation during solvent extraction (2017) (14)
- Nanostructured, complex hydride systems for hydrogen generation (2015) (14)
- Environmental sensitivity and mechanical behavior of boron-doped Fe–45at.%Al intermetallic in the temperature range from 77 to 1000 K (1999) (14)
- Effects of environment on fracture toughness of binary and ternary nickel silicide-based intermetallics (2001) (14)
- Directed precipitation of anhydrous magnesite for improved performance of mineral carbonation of CO2 (2017) (13)
- Hydrogen generation from the ball milled composites of sodium and lithium borohydride (NaBH4/LiBH4) and magnesium hydroxide (Mg(OH)2) without and with the nanometric nickel (Ni) additive (2012) (13)
- Tensile properties of titanium carbide coated carbon fibre — aluminum alloy composites (1989) (13)
- The frictional component in microhardness testing of intermetallics (1993) (13)
- Effect of extrinsic grain-boundary dislocations on M23C6 precipitate nucleation in an austenitic stainless steel (1979) (12)
- The role of interfaces in the application of rapidly solidified metal ribbons as reinforcements for composites (1988) (12)
- The Effects of Temperature and Strain Rate on the Plastic Flow and Ductility of Ultrafine-Grained Type 316 Austenitic Stainless Steel (1987) (12)
- DEPENDENCE OF VICKERS MICROHARDNESS ON LOAD IN THE L12 TITANIUM AND ZIRCONIUM TERNARY TRIALUMINIDES (1990) (12)
- The application of Pettifor structure maps to binary metal hydrides (2014) (11)
- The effect of annealing at 135° on the mechanical properties of injection molded high density polyethylene-polypropylene blends (1988) (11)
- Mechanical and Thermal Dehydrogenation of Lithium Alanate (LiAlH4) and Lithium Amide (LiNH2) Hydride Composites (2012) (11)
- Discontinuous yielding in ultrafine-grained austenitic stainless steels (1987) (11)
- High resolution transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction studies of nanocrystalline manganese borohydride (Mn(BH4)2) after mechano-chemical synthesis and thermal dehydrogenation (2015) (11)
- Fracture toughness and yield strength of boron-doped, high (Ti+Mn) L12 titanium trialuminides (2001) (11)
- Rapid, ambient temperature hydrogen generation from the solid state Li–B–Fe–H system by mechano-chemical activation synthesis (2015) (11)
- The effect of atomic volume on the hydrogen storage capacity of hexagonal metals/intermetallics (2002) (11)
- New intermetallic phases in the NiSiMg ternary system (1998) (11)
- The effect of He+ irradiation on hardness and elastic modulus of Fe-Cr–40 wt.% TiB2 composite rod designed for neutron absorbing (2017) (10)
- Processing and fabrication of advanced materials XII : proceedings of a symposium organized by ASM International, Materials Park, Ohio, USA, 13-15 October 2003, Pittsburgh, Pennsylvania, USA (2004) (10)
- Microstructure and microtexture in powder-extruded monolithic NiAl and NiAlHfC alloy (1998) (10)
- Processing and Fabrication of Advanced Materials: (In 2 Volumes) (2005) (10)
- The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping (LENSTM) (2019) (10)
- Structure of As-cast aluminum matrix composite containing Ni3AI-type intermetallic ribbons (1989) (9)
- The Application of Globular Water-Atomized Iron Powders for Additive Manufacturing by a LENS Technique (2018) (9)
- Structure and hardness of explosively loaded FeAl intermetallic alloys (1997) (9)
- [An update on the use of tissue adhesives in ophthalmology]. (2009) (9)
- Nanomaterials for Hydrogen Storage Produced by Ball Milling (2009) (9)
- On the Validity of Interpretation of Some Grain Boundary Processes Based on the Assumption about the Existence of Unrelaxed Extrinsic Grain Boundary Dislocations (1982) (9)
- Intermetallics: Crystal Structures (2001) (8)
- Mechanical behavior and microcracking of cubic ternary zirconium trialuminides (1992) (8)
- Creep properties of boron-doped dual-phase Ti-rich L12-based trialuminide intermetallics (2003) (8)
- A new approach to the temperature dependence of the yield stress in polycrystalline austenitic stainless steels (1986) (8)
- The Validity of the CSL Model of Grain Boundary Structure for Describing Grain Boundary Behaviour (1979) (8)
- Optimizing milling energy for enhancement of solid-state magnesium sulfate (MgSO4) thermal extraction for permanent CO2 storage (2016) (8)
- Mechano-chemical synthesis of nanostructured hydride composites based on Li-Al-N-Mg for solid state hydrogen storage (2011) (8)
- "In situ" Observation of Dislocation Generation from Grain Boundary in Aluminium (1978) (8)
- The effect of milling energy input and molar ratio on the dehydrogenation and thermal conductivity of the (LiNH2 + nMgH2) (n = 0.5, 0.7, 0.9, 1.0, 1.5 and 2.0) nanocomposites (2014) (8)
- On the kinetics of the spreading of extrinsic grain boundary dislocations (1986) (7)
- Analysis of transmission electron microscopy contrast at extrinsic grain boundary dislocations (1976) (6)
- The effect of boron on the mechanical behaviour of copper modified termary titanium trialuminide (1991) (6)
- Mechano-chemical activation of the (3LiBH4 + TiF3) system, its dehydrogenation behavior and the effects of ultrafine filamentary Ni and graphene additives (2016) (6)
- The microstructure and interface behaviour of Ni/NiAl composites produced by the explosive compaction of powders (1994) (6)
- Evolution of microstructures in the nickel modified titanium trialuminides near the L12 phase field (1996) (5)
- The Dehydrogenation Process of Destabilized NaBH4-MgH2 Solid State Hydrie Composites (2010) (5)
- Temperature dependence of the compressive strength of as-cast cubic zirconium trialuminides (1991) (5)
- Development of structure and porosity in cast Al5CuZr2 and Al66Mn9Zr25 intermetallic compounds (1991) (5)
- Spreading of extrinsic grain boundary dislocations on grain boundaries migrating in thin foil (1981) (5)
- On the fracture toughness of intermetallics estimated from the work of fracture (2001) (4)
- The effects of filamentary Ni, graphene and lithium amide (LiNH2) additives on the dehydrogenation behavior of mechano-chemically synthesized crystalline manganese borohydride (Mn(BH4)2) and its solvent filtration/extraction (2018) (4)
- Mechanical behavior of thein situ composite alloys in the al-ni-ti system near the l12 phase field (1996) (4)
- INVESTIGATION OF EXTRINSIC GRAIN BOUNDARY DISLOCATIONS IN COPPER (1975) (4)
- Formation of Nanocrystalline and Amorphous Hydrides during Controlled Reactive Mechanical Alloying (CRMA) of 2Mg-Fe Mixture (2004) (4)
- As-Cast Structure and the Effects of Temperature on an Al-Si Metal Matrix Composite Reinforced with Ni3Al-Type Ribbons (1992) (4)
- Observations of crack tip process zones in cubic titanium trialuminide intermetallics (2001) (4)
- On the grain boundary conditions for grain boundary sliding in superplastic deformation (1986) (4)
- Microstructure and mechanical properties of Mg 33- x Si x Ni 67 intermetallic composite alloys (1995) (4)
- Fundamental aspects of mechanical dehydrogenation of Li- based complex hydride nanocomposites and their self- discharge at low temperatures (2012) (4)
- A novel Fe–Cr–Nb matrix composite containing the TiB2 neutron absorber synthesized by mechanical alloying and final hot isostatic pressing (HIP) in the Ti-tubing (2016) (4)
- Anomalous softening behaviour prior to static recrystallization of shock-wave deformed feal intermetallic alloys (1998) (4)
- Nanostructured and Nanocomposite Light Metal-Based Compounds for Hydrogen Storage (2004) (4)
- The Effects of Additives on the Dehydrogenation of Amorphous Manganese Borohydride and Its Crystalline Form after Solvent Filtration/Extraction (2017) (3)
- The effects of hydrostatic pressure on the compressive mechanical behavior of L12 Al3Ti-based intermetallic (1994) (3)
- Structural and hydrogen storage capacity evolution of Mg2FeH6 hydride synthesized by reactive mechanical alloying (2004) (3)
- Refractory carbide coatings on carbon fibres for metal matrix composites (1989) (3)
- Application of the Stroh's model to the nucleation of microcracks in L12 titanium trialuminides (1993) (3)
- Effects of PVA concentration and ribbon immersion time on the interfacial shear strength of amorphous metallic ribbon/polypropylene composites (1993) (3)
- Mechanical Disordering of Cubic Intermetallics By Unconventional Methods of Cold-Work and Their Reordering Upon Annealing (1998) (3)
- Catalytic Effects of Nanometric Ni (n-Ni) on the Dehydrogenation of Ball Milled Sodium Alanate (NaAlH 4 ) (2012) (3)
- The effect of chromium and annealing on the crystallographic parameters of γ phase in TiAl-base alloys (1994) (3)
- Roll-bonding of a Laminate Aluminum Alloy/Ni, Al-Type Alloy Composite (1994) (3)
- Comments on “A model for the effect of grain size on the yield stress of metals” (1983) (2)
- Mechanical and Thermal Dehydrogenation of the Mechano-Chemically Synthesized Calcium Alanate (Ca(AlH4)2) and Lithium Chloride (LiCl) Composite (2015) (2)
- Effect of Ni content on the microstructure, microhardness and fracture toughness of magnesium silicide ternary alloy (1994) (2)
- The Effects of Oxidized and Oxide-Free Boron on the Mg-B-H Nanohydrides Transformation in the Nearly Nanosized Powders (2007) (2)
- Mechanical properties and fracture of an amorphous metallic ribbon/thermoplastic matrix composite with low volume fraction of reinforcement (1991) (2)
- Development of a thin film technique for an amorphous metallic ribbon/thermoplastic matrix composite system (1993) (2)
- Comments on “the effect of grain boundary precipitation on the stability of extrinsic grain boundary dislocations in austenitic stainless steel and aluminum alloy” (1986) (2)
- Influence of hot compaction pressure on the interfacial properties in the amorphous metallic ribbon/thermoplastic matrix composite system (1991) (2)
- The Effect of Milling Mode on the Hydriding Properties of Nanocrystalline Mg2Ni (2004) (2)
- Mechnical properties of thermoplastic film/metallic glass composites with improved interfacial strength (1993) (2)
- Effects of Elevated Temperature on an Aluminium Metal-Matrix Composite Containing Ni3Al-Type Ribbons (1991) (1)
- INTERFACES IN COMPOSITES REINFORCED WITH RAPIDLY SOLIDIFIED METALLIC RIBBONS (1988) (1)
- Corrigendum to “Controlled mechano-chemical synthesis of nanostructured ternary complex hydride Mg2FeH6 under low-energy impact mode with and without pre-milling”: [J. Alloys Comp. 384 (2004) 231–248] (2004) (1)
- Mechanochemical activation and synthesis of nanomaterials for hydrogen storage and conversion in electrochemical power sources. (2009) (1)
- Nanostructured Hydrides for Solid State Hydrogen Storage for Vehicular Applications (2011) (1)
- Design of a Low-Melting Point Metal Matrix Composite Reinforced with Intermetallic Ribbons / Design eines niedrig-schmelzenden Metall-Matrix-Verbundwerkstoffes mit verstärkenden intermetallischen Bändern (1990) (1)
- Mechanical and Thermal Dehydrogenation of Lithium Alanate (LiAlH 4 ) and Lithium Amide (LiNH 2 ) Hydride Composites (2012) (1)
- Iron aluminide (FeAl) intermetallics for power generation industries (1999) (1)
- The Effect of Chromium on the Microstructure and Micromechanical Properties of TiAl-Base Alloys (1996) (1)
- The effect of hydrostatic pressurization on the microhardness and compressive behavior of the porous Mn-Modified Ll2 titanium trialuminide (1997) (1)
- Comments on the “The role of non-equilibrium grain boundary structure in strain induced grain boundary migration” (1984) (0)
- On the Relation Between Temperature and Time of the Spreading of Extrinsic Grain Boundary Dislocations and the Grain Boundary Energy in an Austenitic Steel (1982) (0)
- Structure of as cast L1 sub 2 compounds in Al sub 3 Zr-base alloys containing Cu and Mn (1991) (0)
- X-Ray Diffraction Study of Stress in a Magnesium-Hydrogen System Produced by High-Energy Milling of Powders (2007) (0)
- Model of the Non-Equilibrium to Equilibrium Changes in a Grain Boundary Structure (1983) (0)
- Investigation of the Structure of Random Grain Boundaries after Annealing of an Austenitic Steel (1982) (0)
- 6. CASE STUDIES OF SELECTED HYDRIDES FOR NON- AUTOMOTIVE HYDROGEN ENERGY STORAGE (ALANATES) Case 1-LiAlH4 (2018) (0)
- Temperature dependence of fracture toughness of the cubic (L1{sub 2}) titanium trialuminides (1996) (0)
- INTERFACIAL ZONES IN ALUMINUM MATRIX COMPOSITE CONTAINING Ni3Al-TYPE INTERMETALLIC RIBBONS (1989) (0)
- Mechanosynthesis of Nanocrystalline MgB2 Ceramic Powders in Hydrogen Alloying Mills via Amorphous Hydride Intermediate (2006) (0)
- BULK CONSOLIDATION OF NANOSTRUCTURED CUBIC TITANIUM TRIALUMINIDE INTERMETALLIC POWDERS (2001) (0)
- Reply to the Comment on “Model of the Non-Equilibrium to Equilibrium Changes in a Grain Boundary Structure” (1983) (0)
- Advanced nanomaterials for solid state hydrogen energy storage (2018) (0)
- Mechanically Milled Nanocrystalline Cubic Titanium Trialuminide and Iron Aluminide Intermetallics (1999) (0)
- WS11a1 – MECHANICAL BEHAVIOUR OF MODIFIED Al3Ti AND Al3Zr INTERMETALLIC ALLOYS WITH ORDERED FCC STRUCTURE (1992) (0)
- Comments on reply on comments on “the effect of grain boundary precipitation on the stability of extrinsic grain boundary dislocations in austenitic stainless steel and aluminum alloys” (1987) (0)
- The effect of porosity on thermal properties of TiB2-based Cu cermets obtained by ball milling and containerless HIP (2016) (0)
- Microstructure of a Two-phase γ′(Ni3Al)-γ(Ni(Al)) Intermetallic Alloy After Cold-rolling and Annealing (1998) (0)
- METAL MATRIX COMPOSITES REINFORCED WITH INTERMETALLIC RIBBONS (1990) (0)
- The effects of microstructural modification by mechanical milling on hydrogen desorption from magnesium hydride (2007) (0)
- Structure and mechanical properties of boron-doped cubic zirconium trialuminides (1992) (0)
- ROLE OF INTERNAL INTERFACES IN THE MECHANICAL BEHAVIOUR OF ENGINEERING MATERIALS (1989) (0)
- Development of Tough and Strong Cubic Titanium Trialuminides (2000) (0)
- Microcracking Development in the L1 2 Ternary Titanium Trialuminide (1990) (0)
- Nanostructurization of magnesium and Mg₂Ni intermetallic phase-related hydrogen storage materials (2003) (0)
- Mechanically Milled Nanocrystalline Cubic Titanium Trialuminide and Iron Aluminide Intermetallics (1999) (0)
This paper list is powered by the following services:
Other Resources About Robert A. Varin
What Schools Are Affiliated With Robert A. Varin?
Robert A. Varin is affiliated with the following schools: