Roland Prof. Dr. Zengerle

Roland Prof. Dr. Zengerle's AcademicInfluence.com Rankings

Engineering

#5295

World Rank

#6545

Historical Rank

Biomedical Engineering

#386

World Rank

#395

Historical Rank

Applied Physics

#1501

World Rank

#1533

Historical Rank

Electrical Engineering

#1463

World Rank

#1557

Historical Rank

engineering Degrees

Roland Prof. Dr. Zengerle

Physics

#6029

World Rank

#7931

Historical Rank

physics Degrees

Download Badge

Engineering
Physics

Roland Prof. Dr. Zengerle's Degrees

PhD Physics University of Tübingen

Why Is Roland Prof. Dr. Zengerle Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Roland Prof. Dr. Zengerle's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Microfluidic lab-on-a-chip platforms: requirements, characteristics and applications. (2010) (1510)
Microfluidic platforms for lab-on-a-chip applications. (2007) (1025)
Versatile sample environments and automation for biological solution X-ray scattering experiments at the P12 beamline (PETRA III, DESY) (2015) (414)
The centrifugal microfluidic Bio-Disk platform (2007) (396)
Energy harvesting by implantable abiotically catalyzed glucose fuel cells (2008) (338)
Microfluidic lab-on-a-foil for nucleic acid analysis based on isothermal recombinase polymerase amplification (RPA). (2010) (322)
Centrifugal microfluidic platforms: advanced unit operations and applications. (2015) (320)
Technologies for Single-Cell Isolation (2015) (278)
Batch-mode mixing on centrifugal microfluidic platforms. (2005) (257)
Centrifugal extraction of plasma from whole blood on a rotating disk. (2006) (253)
Cellphone-based devices for bioanalytical sciences (2014) (249)
Lab-on-a-Foil: microfluidics on thin and flexible films. (2010) (247)
Rapid prototyping of microfluidic chips in COC (2007) (190)
A smartphone-based colorimetric reader for bioanalytical applications using the screen-based bottom illumination provided by gadgets. (2015) (180)
Strategies for the Fabrication of Porous Platinum Electrodes (2011) (165)
Computational fluid dynamics (CFD) software tools for microfluidic applications – A case study (2008) (146)
Osmotic micropumps for drug delivery. (2012) (143)
Loop-mediated isothermal amplification (LAMP) – review and classification of methods for sequence-specific detection (2020) (134)
Microstructuring of polymer films for sensitive genotyping by real-time PCR on a centrifugal microfluidic platform. (2010) (130)
Fully integrated whole blood testing by real-time absorption measurement on a centrifugal platform. (2006) (129)
Inkjet-like printing of single-cells. (2011) (127)
Frequency-dependent transversal flow control in centrifugal microfluidics. (2005) (127)
Centrifugal step emulsification applied for absolute quantification of nucleic acids by digital droplet RPA. (2015) (126)
Completely superhydrophobic PDMS surfaces for microfluidics. (2012) (126)
Integrated siphon-based metering and sedimentation of whole blood on a hydrophilic lab-on-a-disk (2007) (117)
Three‐Phase Multiscale Modeling of a LiCoO2 Cathode: Combining the Advantages of FIB–SEM Imaging and X‐Ray Tomography (2015) (116)
Patterning of flow and mixing in rotating radial microchannels (2006) (114)
An abiotically catalyzed glucose fuel cell for powering medical implants : Reconstructed manufacturing protocol and analysis of performance (2008) (111)
Rapid and fully automated bacterial pathogen detection on a centrifugal-microfluidic LabDisk using highly sensitive nested PCR with integrated sample preparation. (2015) (109)
LabDisk with complete reagent prestorage for sample-to-answer nucleic acid based detection of respiratory pathogens verified with influenza A H3N2 virus. (2016) (104)
Visualization of flow patterning in high-speed centrifugal microfluidics (2005) (101)
A Combination of X‐Ray Tomography and Carbon Binder Modeling: Reconstructing the Three Phases of LiCoO2 Li‐Ion Battery Cathodes (2014) (100)
Multi-layer SU-8 lift-off technology for microfluidic devices (2005) (100)
Miniature stick-packaging--an industrial technology for pre-storage and release of reagents in lab-on-a-chip systems. (2013) (99)
Continuous microfluidic DNA extraction using phase-transfer magnetophoresis. (2010) (95)
Three-dimensional electrochemical Li-ion battery modelling featuring a focused ion-beam/scanning electron microscopy based three-phase reconstruction of a LiCoO2 cathode (2014) (94)
Digital droplet PCR on disk. (2016) (94)
Nano-morphology of a polymer electrolyte fuel cell catalyst layer—imaging, reconstruction and analysis (2011) (89)
Centrifugal generation and manipulation of droplet emulsions (2006) (88)
Morphological Evolution of Electrochemically Plated/Stripped Lithium Microstructures Investigated by Synchrotron X-ray Phase Contrast Tomography. (2016) (87)
Direct three-dimensional reconstruction of a nanoporous catalyst layer for a polymer electrolyte fuel cell (2011) (87)
Direct deposition of proton exchange membranes enabling high performance hydrogen fuel cells (2015) (87)
Three-Dimensional Reconstruction of a LiCoO2 Li-Ion Battery Cathode (2012) (87)
Centrifugal microfluidic system for primary amplification and secondary real-time PCR. (2010) (83)
Centrifugo-pneumatic valve for metering of highly wetting liquids on centrifugal microfluidic platforms. (2009) (82)
A highly efficient buckypaper-based electrode material for mediatorless laccase-catalyzed dioxygen reduction. (2011) (81)
Single-step centrifugal hematocrit determination on a 10-$ processing device (2007) (80)
Aliquoting on the centrifugal microfluidic platform based on centrifugo-pneumatic valves (2011) (80)
Multilamination of flows in planar networks of rotating microchannels (2006) (79)
Read-out concepts for multiplexed bead-based fluorescence immunoassays on centrifugal microfluidic platforms (2006) (78)
Centrifugo-dynamic inward pumping of liquids on a centrifugal microfluidic platform. (2012) (75)
Study of the Mechanisms of Internal Short Circuit in a Li/Li Cell by Synchrotron X-ray Phase Contrast Tomography (2017) (75)
Tailoring the Membrane‐Electrode Interface in PEM Fuel Cells: A Review and Perspective on Novel Engineering Approaches (2018) (74)
Sensitivity enhancement for colorimetric glucose assays on whole blood by on-chip beam-guidance (2006) (71)
Degradation of Li/S Battery Electrodes On 3D Current Collectors Studied Using X-ray Phase Contrast Tomography (2015) (69)
Graphene-based rapid and highly-sensitive immunoassay for C-reactive protein using a smartphone-based colorimetric reader. (2015) (68)
FIB/SEM-based calculation of tortuosity in a porous LiCoO2 cathode for a Li-ion battery (2013) (68)
Dynamic capillary wetting studied with dissipative particle dynamics (2008) (67)
Cyclic Electrodeposition of PtCu Alloy: Facile Fabrication of Highly Porous Platinum Electrodes (2012) (65)
Nanotechnology-Based Biosensors and Diagnostics: Technology Push versus Industrial/Healthcare Requirements (2012) (65)
Pre-storage of liquid reagents in glass ampoules for DNA extraction on a fully integrated lab-on-a-chip cartridge. (2010) (65)
Systematic screening of carbon-based anode materials for microbial fuel cells with Shewanella oneidensis MR-1. (2013) (63)
Direct hemoglobin measurement on a centrifugal microfluidic platform for point-of-care diagnostics (2006) (59)
Multiscale tomography of nanoporous carbon-supported noble metal catalyst layers (2013) (59)
One-step kinetics-based immunoassay for the highly sensitive detection of C-reactive protein in less than 30 min. (2014) (58)
Integrated Sample Preparation, Reaction, and Detection on a High-Frequency Centrifugal Microfluidic Platform (2005) (57)
Strategies to extend the lifetime of bioelectrochemical enzyme electrodes for biosensing and biofuel cell applications (2011) (57)
Centrifugal gas-phase transition magnetophoresis (GTM)--a generic method for automation of magnetic bead based assays on the centrifugal microfluidic platform and application to DNA purification. (2013) (57)
A potentially implantable glucose fuel cell with Raney-platinum film electrodes for improved hydrolytic and oxidative stability (2011) (56)
Microfluidic solutions enabling continuous processing and monitoring of biological samples: A review. (2016) (55)
Fast and reliable protein microarray production by a new drop-in-drop technique. (2005) (54)
Single-Cell Printer (2013) (54)
Carbon electrodes for direct electron transfer type laccase cathodes investigated by current density-cathode potential behavior. (2010) (52)
Static and dynamic flow simulation of a KOH-etched microvalve using the finite-element method (1996) (52)
Library preparation for next generation sequencing: A review of automation strategies. (2020) (52)
High-resolution permanent photoresist laminate TMMF for sealed microfluidic structures in biological applications (2011) (51)
PipeJet: A Simple Disposable Dispenser for the Nano- and Microliter Range (2004) (50)
A microfluidic timer for timed valving and pumping in centrifugal microfluidics. (2015) (50)
Assessment of hydrogels for bioprinting of endothelial cells. (2018) (49)
Automated nucleic acid extraction from whole blood, B. subtilis, E. coli, and Rift Valley fever virus on a centrifugal microfluidic LabDisk (2015) (49)
Large scale production and controlled deposition of single HUVEC spheroids for bioprinting applications (2017) (49)
Improved Pt-utilization efficiency of low Pt-loading PEM fuel cell electrodes using direct membrane deposition (2015) (47)
Increasing μDMFC efficiency by passive CO2 bubble removal and discontinuous operation (2006) (47)
Passive water removal in fuel cells by capillary droplet actuation (2008) (47)
A tunable and highly-parallel picoliter-dispenser based on direct liquid displacement (2002) (46)
Analysis of fast protein phosphorylation kinetics in single cells on a microfluidic chip. (2015) (45)
Centrifugo-magnetic pump for gas-to-liquid sampling (2007) (45)
Morphology of nanoporous carbon-binder domains in Li-ion batteries—A FIB-SEM study (2015) (45)
A fully spray-coated fuel cell membrane electrode assembly using Aquivion ionomer with a graphene oxide/cerium oxide interlayer (2017) (44)
The reasons for the high power density of fuel cells fabricated with directly deposited membranes (2016) (43)
Cerium Oxide Decorated Polymer Nanofibers as Effective Membrane Reinforcement for Durable, High‐Performance Fuel Cells (2017) (43)
Highly parallel dispensing of chemical and biological reagents (2004) (43)
The dispensing well plate: a novel nanodispenser for the multiparallel delivery of liquids (DWP Part I) (2004) (42)
Alginate bead fabrication and encapsulation of living cells under centrifugally induced artificial gravity conditions (2008) (41)
Modelling the water distribution within a hydrophilic and hydrophobic 3D reconstructed cathode catalyst layer of a proton exchange membrane fuel cell (2013) (41)
Multi-Scale Correlative Tomography of a Li-Ion Battery Composite Cathode (2016) (41)
Microfluidic Apps for off-the-shelf instruments. (2012) (41)
A highly parallel picoliter dispenser with an integrated, novel capillary channel structure (2004) (40)
Porous Platinum Electrodes Fabricated by Cyclic Electrodeposition of PtCu Alloy: Application to Implantable Glucose Fuel Cells (2012) (39)
A Highly Parallel Nanoliter Dispenser for Microarray Fabrication (2004) (38)
A complete testing environment for the automated parallel performance characterization of biofuel cells: design, validation, and application (2009) (38)
Real-time PCR based detection of a panel of food-borne pathogens on a centrifugal microfluidic “LabDisk” with on-disk quality controls and standards for quantification (2014) (38)
Single-cell printing based on impedance detection. (2015) (38)
Magnetic chemiluminescent immunoassay for human C-reactive protein on the centrifugal microfluidics platform (2015) (38)
Manufacture of chitosan microbeads using centrifugally driven flow of gel-forming solutions through a polymeric micronozzle. (2009) (38)
The NeuroProbes Project - Multifunctional Probe Arrays for Neural Recording and Stimulation (2008) (38)
Raney-platinum film electrodes for potentially implantable glucose fuel cells. Part 2: Glucose-tolerant oxygen reduction cathodes (2010) (37)
Digital droplet LAMP as a microfluidic app on standard laboratory devices (2016) (37)
Revisiting methods to characterize bioelectrochemical systems: The influence of uncompensated resistance (iRu-drop), double layer capacitance, and junction potential (2017) (37)
Simplified Real-Time Multiplex Detection of Loop-Mediated Isothermal Amplification Using Novel Mediator Displacement Probes with Universal Reporters. (2018) (37)
Controlled counter-flow motion of magnetic bead chains rolling along microchannels (2011) (37)
Simple fabrication of 12 μm thin nanocomposite fuel cell membranes by direct electrospinning and printing (2017) (36)
Leukocyte enrichment based on a modified pinched flow fractionation approach (2013) (36)
Microfluidics in silicon/polymer technology as a cost-efficient alternative to silicon/glass (2011) (36)
Solid-phase PCR in a picowell array for immobilizing and arraying 100,000 PCR products to a microscope slide. (2012) (36)
LabDisk for SAXS: a centrifugal microfluidic sample preparation platform for small-angle X-ray scattering. (2016) (35)
Process Development for a High-Throughput Fine Line Metallization Approach Based on Dispensing Technology (2013) (35)
Raney-platinum film electrodes for potentially implantable glucose fuel cells. Part 1: Nickel-free glucose oxidation anodes (2010) (35)
A Single Layer Glucose Fuel Cell Intended as Power Supplying Coating for Medical Implants (2011) (34)
Enhancing the quality of the tomography of nanoporous materials for better understanding of polymer electrolyte fuel cell materials (2015) (34)
Active Continuous-Flow Micromixer Using an External Braille Pin Actuator Array (2013) (34)
Current methods for fluorescence-based universal sequence-dependent detection of nucleic acids in homogenous assays and clinical applications. (2013) (34)
On the importance of FIB-SEM specific segmentation algorithms for porous media (2014) (34)
Rapid microarray processing using a disposable hybridization chamber with an integrated micropump. (2012) (34)
A capacitive sensor for non-contact nanoliter droplet detection (2009) (33)
Alginate bead fabrication and encapsulation of living cells under centrifugally induced artificial gravity conditions. (2008) (32)
Investigations of Thick-Film-Paste Rheology for Dispensing Applications (2011) (32)
The LabTube - a novel microfluidic platform for assay automation in laboratory centrifuges. (2014) (32)
Microthermoforming of microfluidic substrates by soft lithography (µTSL): optimization using design of experiments (2011) (32)
An intra-cerebral drug delivery system for freely moving animals (2012) (31)
Self-regulating passive fuel supply for small direct methanol fuel cells operating in all orientations (2009) (31)
Directly deposited Nafion/TiO2 composite membranes for high power medium temperature fuel cells (2016) (30)
A completely spray-coated membrane electrode assembly (2016) (30)
Molybdenum sulphides on carbon supports as electrocatalysts for hydrogen evolution in acidic industrial wastewater (2017) (30)
TOPSPOT-a new method for the fabrication of microarrays (2000) (30)
Towards a “Sample-In, Answer-Out” Point-of-Care Platform for Nucleic Acid Extraction and Amplification: Using an HPV E6/E7 mRNA Model System (2011) (29)
Tomography based screening of flow field / current collector combinations for PEM water electrolysis (2014) (28)
Cytocompatibility testing of hydrogels toward bioprinting of mesenchymal stem cells. (2017) (28)
Performance Loss of a Pt‐Based Implantable Glucose Fuel Cell in Simulated Tissue and Cerebrospinal Fluids (2014) (28)
Capillary driven movement of gas bubbles in tapered structures (2010) (28)
Review on pneumatic operations in centrifugal microfluidics. (2019) (28)
Centrifugo-pneumatic multi-liquid aliquoting - parallel aliquoting and combination of multiple liquids in centrifugal microfluidics. (2015) (28)
Pneumatic dispensing of nano- to picoliter droplets of liquid metal with the StarJet method for rapid prototyping of metal microstructures (2011) (27)
A versatile and flexible low-temperature full-wafer bonding process of monolithic 3D microfluidic structures in SU-8 (2008) (27)
Enhanced Liquid Metal Micro Droplet Generation by Pneumatic Actuation Based on the StarJet Method (2013) (27)
Power supply for electronic contact lenses: Abiotic glucose fuel cells vs. Mg/air batteries (2018) (27)
Enhanced single-cell printing by acoustophoretic cell focusing. (2015) (26)
Discrete Chemical Release From a Microfluidic Chip (2006) (26)
Biosensor microprobes with integrated microfluidic channels for bi-directional neurochemical interaction (2011) (26)
C-reactive protein and interleukin 6 microfluidic immunoassays with on-chip pre-stored reagents and centrifugo-pneumatic liquid control. (2017) (26)
In situ characterization of the mTORC1 during adipogenesis of human adult stem cells on chip (2016) (26)
Proximity Ligation Assay for High-content Profiling of Cell Signaling Pathways on a Microfluidic Chip* (2013) (26)
Non-contact production of oligonucleotide microarrays using the highly integrated TopSpot nanoliter dispenser. (2004) (26)
Centrifugo-thermopneumatic fluid control for valving and aliquoting applied to multiplex real-time PCR on off-the-shelf centrifugal thermocycler (2015) (26)
Real-time PCR probe optimization using design of experiments approach (2015) (25)
Universal protocol for grafting PCR primers onto various lab-on-a-chip substrates for solid-phase PCR (2012) (25)
Fabrication of highly porous platinum electrodes for micro-scale applications by pulsed electrodeposition and dealloying (2013) (25)
Capillary-driven pumping for passive degassing and fuel supply in direct methanol fuel cells (2009) (25)
Relation between chromatographic resolution and signal-to-noise ratio in spectrophotometric HPLC detection. (2013) (25)
Novel gravimetric measurement technique for quantitative volume calibration in the sub-microliter range (2013) (25)
Highly flexible UV-vis radiation sources and novel detection schemes for spectrophotometric HPLC detection. (2014) (24)
Online Tissue Discrimination for Transcutaneous Needle Guidance Applications Using Broadband Impedance Spectroscopy (2012) (24)
A One-Compartment, Direct Glucose Fuel Cell for Powering Long-Term Medical Implants (2006) (24)
Mediator probe PCR: a novel approach for detection of real-time PCR based on label-free primary probes and standardized secondary universal fluorogenic reporters. (2012) (23)
Prolongation of electrode lifetime in biofuel cells by periodic enzyme renewal (2012) (23)
Overcoming bottlenecks of enzymatic biofuel cell cathodes: crude fungal culture supernatant can help to extend lifetime and reduce cost. (2013) (23)
Simulation of advanced microfluidic systems with dissipative particle dynamics (2009) (23)
A FLOW SWITCH BASED ON CORIOLIS FORCE (2003) (23)
System-level network simulation for robust centrifugal-microfluidic lab-on-a-chip systems. (2016) (23)
Microfluidic vapor-diffusion barrier for pressure reduction in fully closed PCR modules. (2015) (22)
Centrifugal Step Emulsification can Produce Water in Oil Emulsions with Extremely High Internal Volume Fractions (2015) (22)
Point-of-care testing system for digital single cell detection of MRSA directly from nasal swabs. (2020) (22)
Impact of medium properties on droplet release in a highly parallel nanoliter dispenser (2004) (22)
Dye-based coatings for hydrophobic valves and their application to polymer labs-on-a-chip (2010) (22)
RespiDisk: a point-of-care platform for fully automated detection of respiratory tract infection pathogens in clinical samples. (2020) (21)
Molecular Genetic Characterization of Individual Cancer Cells Isolated via Single-Cell Printing (2016) (21)
Miniaturized FPGA-Based High-Resolution Time-Domain Reflectometer (2013) (21)
LAB-ON-CHIP-BASED CELL SEPARATION BY COMBINING DIELECTROPHORESIS AND CENTRIFUGATION (2006) (21)
Multi physics network simulation of a solenoid dispensing valve (2014) (21)
A Low-Cost, Normally Closed, Solenoid Valve for Non-Contact Dispensing in the Sub-µL Range (2013) (21)
StarJet: Pneumatic Dispensing of Nano- to Picoliter Droplets of Liquid Metal (2009) (21)
Construction of a microstructured collagen membrane mimicking the papillary dermis architecture and guiding keratinocyte morphology and gene expression. (2012) (20)
Multiplex genotyping of KRAS point mutations in tumor cell DNA by allele-specific real-time PCR on a centrifugal microfluidic disk segment (2014) (20)
Gravity-driven microfluidic assay for digital enumeration of bacteria and for antibiotic susceptibility testing. (2019) (20)
Generic method of printing window adjustment for extrusion-based 3D-bioprinting to maintain high viability of mesenchymal stem cells in an alginate-gelatin hydrogel (2020) (20)
In vivo evaluation of bioprinted prevascularized bone tissue (2020) (20)
Synchrotron X‐ray tomographic study of a silicon electrode before and after discharge and the effect of cavities on particle fracturing (2016) (20)
Theoretical evaluation of the dispensing well plate method (DWP part II) (2004) (20)
How Does the Choice of Anode Material Influence Electrical Performance? A Comparison of Two Microbial Fuel Cell Model Organisms (2014) (20)
Label-free isolation and deposition of single bacterial cells from heterogeneous samples for clonal culturing (2016) (20)
Rigorous buoyancy driven bubble mixing for centrifugal microfluidics. (2016) (20)
Three-dimensional morphology of the interface between micro porous layer and catalyst layer in a polymer electrolyte membrane fuel cell (2016) (19)
Open microfluidic gel electrophoresis: Rapid and low cost separation and analysis of DNA at the nanoliter scale (2017) (19)
Sorting and lysis of single cells by BubbleJet technology (2012) (19)
A Novel Microfluidic Platform for Continuous DNA Extraction and Purification using Laminar Flow Magnetophoresis (2009) (19)
A versatile miniature bioreactor and its application to bioelectrochemistry studies. (2010) (19)
Quantification of artifacts in scanning electron microscopy tomography: Improving the reliability of calculated transport parameters in energy applications such as fuel cell and battery electrodes (2015) (19)
Robust microprobe systems for simultaneous neural recording and drug delivery (2009) (18)
Electrochemical pesticide detection with AutoDip--a portable platform for automation of crude sample analyses. (2015) (18)
Nanofiber-deposited porous platinum enables glucose fuel cell anodes with high current density in body fluids (2017) (17)
Improving the water management in anion-exchange membrane fuel cells via ultra-thin, directly deposited solid polymer electrolyte (2020) (17)
How Coarsening the 3D Reconstruction of a Porous Material Influences Diffusivity and Conductivity Values (2012) (17)
IR thermocycler for centrifugal microfluidic platform with direct on-disk wireless temperature measurement system (2011) (17)
Normally-closed peristaltic micropump with re-usable actuator and disposable fluidic chip (2009) (17)
Water management in novel direct membrane deposition fuel cells under low humidification (2016) (17)
Automated Forensic Animal Family Identification by Nested PCR and Melt Curve Analysis on an Off-the-Shelf Thermocycler Augmented with a Centrifugal Microfluidic Disk Segment (2015) (17)
Diagnostic tools for tackling febrile illness and enhancing patient management (2018) (17)
Robust temperature change rate actuated valving and switching for highly integrated centrifugal microfluidics. (2017) (17)
Quantitative characterization of non-contact microdispensing technologies for the sub-microliter range. (2013) (17)
Optical beam guidance in monolithic polymer chips for miniaturized colorimetric assays (2005) (16)
Real-time stability testing of air-dried primers and fluorogenic hydrolysis probes stabilized by trehalose and xanthan. (2014) (16)
Centrifugo-pneumatic sedimentation, re-suspension and transport of microparticles. (2015) (16)
Chair/bedside diagnosis of oral and respiratory tract infections, and identification of antibiotic resistances for personalised monitoring and treatment (2016) (16)
Automated Pre-Analytic Processing of Whole Saliva Using Magnet-Beating for Point-of-Care Protein Biomarker Analysis (2019) (16)
Adhesive bonding of microfluidic chips: influence of process parameters (2010) (16)
30 μm thin hexamethyl-p-terphenyl poly(benzimidazolium) anion exchange membrane for vanadium redox flow batteries (2019) (16)
Droplet release in a highly parallel, pressure driven nanoliter dispenser (2003) (15)
The effect of wetting properties on bubble dynamics and fuel distribution in the flow field of direc (2011) (15)
Rapid and highly sensitive luciferase reporter assay for the automated detection of botulinum toxin in the centrifugal microfluidic LabDisk platform (2013) (15)
Poisoning of Highly Porous Platinum Electrodes by Amino Acids and Tissue Fluid Constituents (2015) (15)
Tailormade Microfluidic Devices Through Photochemical Surface Modification (2010) (15)
Impact of Carbon Support Corrosion on Performance Losses in Polymer Electrolyte Membrane Fuel Cells (2019) (15)
One Inch Thermal Bubble Jet Printhead With Laser Structured Integrated Polyimide Nozzle Plate (2007) (15)
Centrifugal step emulsification: How buoyancy enables high generation rates of monodisperse droplets. (2019) (15)
Three-Dimensional CFD-Simulation of a Thermal Bubble Jet Printhead (2004) (15)
Temperature change rate actuated bubble mixing for homogeneous rehydration of dry pre-stored reagents in centrifugal microfluidics. (2018) (15)
Network simulation-based optimization of centrifugo-pneumatic blood plasma separation. (2017) (14)
Non-contact optical sensor to detect free flying droplets in the nanolitre range (2010) (14)
Centrifugal LabTube platform for fully automated DNA purification and LAMP amplification based on an integrated, low-cost heating system (2014) (14)
Dispensing Technology on the Route to an Industrial Metallization Process (2015) (14)
TopSpot® Vario: a novel microarrayer system for highly flexible and highly parallel picoliter dispensing (2009) (13)
Examination of Hydrogels and Mesenchymal Stem Cell Sources for Bioprinting of Artificial Osteogenic Tissues (2019) (13)
Wafer-level packaging and laser bonding as an approach for silicon-into-lab-on-chip integration (2013) (13)
Static and dynamic behaviour of gas bubbles in T-shaped non-clogging micro-channels (2008) (13)
Optimizing Fine Line Dispensed Contact Grids (2014) (13)
Aggregation of bead-monolayers in flat microfluidic chambers - simulation by the model of porous media. (2004) (13)
Correlations between Finger Geometry and Dispensing Paste Rheology (2012) (12)
Using planktonic microorganisms to supply the unpurified multi-copper oxidases laccase and copper efflux oxidases at a biofuel cell cathode. (2014) (12)
Converging Human and Malaria Vector Diagnostics with Data Management towards an Integrated Holistic One Health Approach (2018) (12)
Passive water management for µfuel-cells using capillary microstructures (2008) (12)
Single-cell dispensing and ‘real-time’ cell classification using convolutional neural networks for higher efficiency in single-cell cloning (2020) (12)
Bioprinting of high cell‐density constructs leads to controlled lumen formation with self‐assembly of endothelial cells (2019) (12)
Pulsed Electrodeposition of Highly Porous Pt Alloys for use in Methanol, Formic Acid, and Glucose Fuel Cells (2018) (12)
Open-source hybrid 3D-bioprinter for simultaneous printing of thermoplastics and hydrogels (2021) (12)
Liquids on-chip: direct storage and release employing micro-perforated vapor barrier films. (2015) (11)
Ambulatory Treatment and Telemonitoring of Patients with Parkinson’s Disease (2011) (11)
Automated serial dilutions for high-dynamic-range assays enabled by fill-level-coupled valving in centrifugal microfluidics. (2019) (11)
Localized functional chemical stimulation of TE 671 cells cultured on nanoporous membrane by calcein and acetylcholine. (2007) (11)
Automated innovative diagnostic, data management and communication tool, for improving malaria vector control in endemic settings (2016) (11)
Fusing MEMS technology with lab-on-chip: nanoliter-scale silicon microcavity arrays for digital DNA quantification and multiplex testing (2020) (11)
Capacitive on-line hematocrit sensor design based on impedance spectroscopy for use in hemodialysis machines (2009) (11)
Microdispenser array for highly parallel and accurate liquid handling (2001) (11)
Aliquoting structure for centrifugal microfluidics based on a new pneumatic valve (2008) (11)
An improved 24 channel picoliter dispenser based on direct liquid displacement (2003) (11)
StarTube: a tube with reduced contact line for minimized gas bubble resistance. (2008) (11)
Design and Fabrication of a Centrifugally Driven Microfluidic Disk for Fully Integrated Metabolic Assays on Whole Blood (2006) (11)
A microfluidic cartridge for fast and accurate diagnosis of Mycobacterium tuberculosis infections on standard laboratory equipment. (2021) (11)
Alginate micro-bead fabrication on a centrifugal microfluidics platform (2007) (10)
Dispensing well plate (DWP): a highly integrated nanoliter dispensing system (2003) (10)
High Precision Phase Measurement Technique for Cell Impedance Spectroscopy (2010) (10)
The Dispensing Well Plate: A Novel Device for Nanoliter Liquid Handling in Ultra High-Throughput Screening (2004) (10)
Flow control for lateral flow strips with centrifugal microfluidics. (2019) (10)
Microfluidic for Lab-on-a-Chip (2008) (10)
Scalable fabrication of renal spheroids and nephron-like tubules by bioprinting and controlled self-assembly of epithelial cells (2021) (9)
Centrifugal Microfluidic Integration of 4-Plex ddPCR Demonstrated by the Quantification of Cancer-Associated Point Mutations (2021) (9)
RApid prototyping of 3D microstructures by direct printing of liquid metal at temperatures up to 500°C using the starjet technology (2011) (9)
Monochrome Multiplexing in Polymerase Chain Reaction by Photobleaching of Fluorogenic Hydrolysis Probes. (2016) (9)
PipeJet™ - A SIMPLE DISPOSABLE DISPENSER FOR THE NANOLITER RANGE (2004) (9)
Modification of micronozzle surfaces using fluorinated polymeric nanofilms for enhanced dispensing of polar and nonpolar fluids. (2005) (9)
Versatile Tool for Droplet Generation in Standard Reaction Tubes by Centrifugal Step Emulsification (2020) (9)
Non-Contact Nanoliter & Picoliter Liquid Dispensing (2007) (9)
One-step, wash-free, bead-based immunoassay employing bound-free phase detection. (2021) (9)
Quantitative volume determination of dispensed nanoliter droplets on the fly (2009) (9)
Miniaturized and highly parallel protein crystallization on a microfluidic disc (2007) (9)
Through-holes, cavities and perforations in polydimethylsiloxane (PDMS) chips (2014) (9)
An air-breathing enzymatic cathode with extended lifetime by continuous laccase supply. (2018) (9)
Fully passive degassing and fuel supply in direct methanol fuel cells (2008) (9)
Front side metallization of silicon solar cells by direct printing of molten metal (2018) (9)
Micromachined Fused Silica Liquid Core Waveguide Capillary Flow Cell. (2016) (9)
Fabrication of Highly Porous Platinum by Cyclic Electrodeposition of PtCu Alloys: How do Process Parameters Affect Morphology? (2013) (9)
From microfluidic application to nanofluidic phenomena issue Reviewing the latest advances in microfluidic and nanofluidic research (2010) (9)
Membrane-based sample inlet for centrifugal microfluidic cartridges (2018) (8)
Fluorescence signal-to-noise optimisation for real-time PCR using universal reporter oligonucleotides (2018) (8)
From CAD to microfluidic chip within one day: rapid prototyping of lab-on-chip cartridges using generic polymer parts (2020) (8)
Single-use capacitive pressure sensor employing radial expansion of a silicone tube (2016) (8)
Fully automated point-of-care differential diagnosis of acute febrile illness (2021) (8)
Liquid reagent storage and release for centrifugally operated Lab-on-a-Chip systems based on a burstable seal (2009) (8)
Direct printing of miniscule aluminum alloy droplets and 3D structures by StarJet technology (2018) (8)
Automation of amplicon-based library preparation for next generation sequencing by centrifugal microfluidics. (2020) (8)
A Disposable Dispensing Valve for Non-Contact Microliter Applications in a 96-Well Plate Format (2015) (7)
Semi-contact-writing of polymer molds for prototyping PDMS chips with low surface roughness, sharp edges and locally varying channel heights (2016) (7)
Design of a Passive and Portable DMFC Operating in All Orientations (2009) (7)
Axial centrifugal filtration — A novel approach for rapid bacterial concentration from a large volume (2013) (7)
A Modular Microreactor Design for High-Temperature Catalytic Oxidation Reactions (2000) (7)
A Surface Mountable Glucose Fuel Cell for Medical Implants (2007) (7)
IMPROVED GAS BUBBLE MOBILITY IN CHIC-TYPE FLOW CHANNELS (2004) (7)
Noncontact Determination of Velocity and Volume of Nanoliter Droplets on the Fly (2011) (7)
Bubble Jet agent release cartridge for chemical single cell stimulation (2013) (7)
Approaches for drug delivery with intracortical probes (2014) (7)
A Simple and Flexible Micro Reactor for Investigations of Heterogeneous Catalytic Gas Phase Reactions (1999) (7)
OralDisk: A Chair-Side Compatible Molecular Platform Using Whole Saliva for Monitoring Oral Health at the Dental Practice (2021) (7)
Lamination of polyethylene composite films by ultrasonic welding: Investigation of peel behavior and identification of optimum welding parameters (2014) (7)
Bubble-free priming of blind channels (2004) (7)
Systematic investigation of anode materials for microbial fuel cells with the model organism G . sulfurreducens (2018) (7)
Production of solder microdroplets using a highly parallel and contact-free printing method (2007) (7)
Local hydration in ionomer composite membranes determined with confocal Raman microscopy (2019) (7)
Neuromedicator - a disposable drug delivery system with silicon microprobes for neural research (2010) (7)
Parallelization of chip-based fluorescence immuno-assays with quantum-dot labeled beads (2005) (7)
Drug release mechanisms of steroid eluting rings in cardiac pacemaker lead electrodes (2012) (7)
A novel concept for long-term pre-storage and release of liquids for pressure-driven lab-on-a-chip devices (2015) (7)
A Smart Interface for Reliable Intradermal Injection and Infusion of High and Low Viscosity Solutions (2011) (7)
PCR-slide: a modular and cascadable platform for DNA sample processing with integrated nanolitre dosage (2004) (6)
Virtual Fluorescence Color Channels by Selective Photobleaching in Digital PCR Applied to the Quantification of KRAS Point Mutations. (2021) (6)
Optical non-contact localization of liquid-gas interfaces on disk during rotation for measuring flow rates and viscosities. (2012) (6)
The Way to High Volume Fabrication of Lab-on-a-Chip Devices—A Technological Approach for Polymer Based Microfluidic Systems with Integrated Active Valves and Pumps (2009) (6)
High Dynamic Range Digital Assay Enabled by Dual-Volume Centrifugal Step Emulsification. (2021) (6)
Simplified development of multiplex real-time PCR through master mix augmented by universal fluorogenic reporters. (2016) (6)
Digital hydraulic drive for microfluidics and miniaturized cell culture devices based on shape memory alloy actuators (2018) (6)
Simultaneous use of a crossflow filtration membrane as microbial fuel cell anode - Permeate flow leads to 4-fold increased current densities. (2018) (6)
Drop-on-demand generation of aluminum alloy microdroplets at 950 °C using the StarJet technology (2017) (6)
An intra-cerebral drug delivery system for freely moving animals (2012) (6)
Simulation of a Micro Dispenser Using Lumped Models (2002) (6)
Microfluidics: an enabling technology for the life sciences (2004) (6)
A versatile-deployable bacterial detection system for food and environmental safety based on LabTube-automated DNA purification, LabReader-integrated amplification, readout and analysis. (2014) (6)
A Smartphone-Based Colorimetric Reader for Human C-Reactive Protein Immunoassay. (2017) (6)
Direct hemoglobin measurement by monolithically integrated optical beam guidance (2005) (6)
Miniaturized osmotic pump for oromucosal drug delivery with external readout station (2011) (6)
Hematocrit Measurement - A high precision on-line measurement system based on impedance spectroscopy for use in hemodialysis machines (2009) (6)
TMMF dry film resist as masking layer in deep etching of Pyrex-glass for microfluidic chip fabrication (2011) (6)
Model fluids representing aqueous in-vitro diagnostic reagents for the development of dispensing systems. (2013) (6)
MAGNETIC BEAD BASED DNA PURIFICATION ON A DISPOSABLE CENTRIFUGAL MICROFLUIDIC FOIL CARTRIDGE (2010) (5)
A Simple Opto-Fluidic Switch Detecting Liquid Filling in Polymer-Based Microfluidic Systems (2007) (5)
Integration of Microfluidic Channels into Laser-Fabricated Neural Electrode Arrays (2009) (5)
Enzymatic Fuel Cells Solely Supplied with Unpurified Cellobiose Dehydrogenase and Laccase in Microorganism’s Culture Supernatants (2014) (5)
Tomographic Analysis of Polymer Electrolyte Fuel Cell Catalyst Layers: Methods, Validity and Challenges (2015) (5)
A Calibration-Free, Noncontact, Disposable Liquid Dispensing Cartridge Featuring an Online Process Control (2014) (5)
A novel approach for the fabrication of all-polymer microfluidic devices (2010) (5)
MICROFLUIDIC APPS ON STANDARD LAB-INSTRUMENTS (2012) (5)
A micro reaction tool for heterogeneous catalytic gas phase reactions (1999) (5)
VectorDisk: A Microfluidic Platform Integrating Diagnostic Markers for Evidence-Based Mosquito Control (2020) (5)
Wafer level fabrication of single cell dispenser chips with integrated electrodes for particle detection (2015) (5)
Prototyping of multilayer waveguides with V-grooves in COC/Topas® (2006) (5)
Microfluidics for Drug Delivery (2009) (5)
The Model of Porous Media - Complete Description for Aggregation of Bead-Monolayers in Flat Microfluidic Chambers (2004) (5)
NeuroProbes - Development of Modular Multifunctional Probe Arrays for Neuroscience (2007) (5)
Minimizing Ethanol Carry-Over in Centrifugal Microfluidic Nucleic Acid Extraction by Advanced Bead Handling and Management of Diffusive Mass Transfer (2019) (5)
Eliminating viscosity bias in lateral flow tests (2021) (5)
Lab-on-a-chip solutions designed for being operated on standard laboratory instruments (2010) (5)
Mechanical properties of polycaprolactone (PCL) scaffolds for hybrid 3D-bioprinting with alginate-gelatin hydrogel. (2022) (5)
NOVEL GRAVIMETIC CALIBRATION METHOD FOR NANO LITER LIQUID HANDLING DEVICES (2012) (5)
Solvent Bonding of a Drug Delivery Device by Using Hansen Solubility Parameters (2011) (4)
Automated sample-to-answer nucleic acid testing with frequency controlled reagent release from cartridge integrated stickpacks (2015) (4)
DNA BASED SAMPLE-TO-ANSWER DETECTION OF BACTERIAL PATHOGENS ON A CENTRIFUGAL MICROFLUIDIC FOIL CARTRIDGE (2012) (4)
A flat and cost effective actuator based on superabsorbent polymer driving a skin attachable drug delivery system (2012) (4)
Real-time cannula navigation in biological tissue with high temporal and spatial resolution based on impedance spectroscopy (2010) (4)
Non-Contact Detection of Free Flying Nanoliter Droplets (2007) (4)
Silicon Microprobe Systems for Neural Drug Delivery: Experimental Characterization of Liquid Distribution (2009) (4)
Novel Structure for Passive CO2Degassing in μDMFC (2006) (4)
HIGHLY PARALLEL AND ACCURATE NANOLITER DISPENSER FOR HIGH-THROUGHPUT-SYNTHESIS OF CHEMICAL COMPOUNDS (2001) (4)
Microfluidic cartridges for DNA purification and genotyping processed in standard laboratory instruments (2011) (4)
Generation of High Aspect Ratio Metal Microstructures Exhibiting Low Surface Roughness by Drop-wise Printing of Liquid Metal (2015) (4)
A technology platform for digital nucleic acid diagnostics at the point of care (2017) (4)
Electrodeposited thin-layer electrodes for the use in potentially implantable glucose fuel cells (2009) (4)
Development of a high-throughput fine line metallization process using CFD-simulation (2013) (4)
Long-Term On-Chip Storage and Release of Liquid Reagents for Diagnostic Lab-on-a-Chip Applications (2013) (4)
BUBBLE-FREE PRIMING OF BLIND CAPILLARIES FOR HIGH-ACCURACY CENTRIFUGAL HEMATOCRIT MEASUREMENTS (2005) (4)
A Centrifugo-Magnetically Actuated Gas Micropump (2006) (4)
A Binder-less Glucose Fuel Cell with Improved Chemical Stability Intended as Power Supply for Medical Implants (2009) (4)
Adjustable Diffusion Barrier for Controlled Drug Release in Spastic and Pain Therapy (2009) (4)
Tryptic digestion of human serum for proteomic mass spectrometry automated by centrifugal microfluidics. (2020) (4)
FORMATION OF HEXAGONAL MONOLAYERS BY FLOW OF BEAD SUSPENSIONS INTO FLAT MICROCHAMBERS (2003) (4)
Liquid volume measurement method for the picoliter to nanoliter volume range based on quartz crystal microbalance technology (2014) (3)
Numerical Investigations on Electric Field Characteristics with Respect to Capacitive Detection of Free-Flying Droplets (2012) (3)
Integration of CMOS Biosensor into a Polymeric Lab-on-a-Chip System (2013) (3)
Nanoliter Droplet Characterization using Vibrating Crystal Sensor with Surface-attached Polymer Hydrogel Coating☆ (2012) (3)
UNIDIRECTIONAL SHAKE-MODE FOR MIXING HIGHLY WETTING FLUIDS ON CENTRIFUGAL PLATFORMS (2008) (3)
Towards a microfluidic dispenser chip for printing of single cells (2011) (3)
Modelling Free Jet Ejection on a System Level – An approach for microfluidics (2002) (3)
Coriolis-Induced Flow Control for Micro- and Nanofluidic Lab-on-a-Disk Technologies (2004) (3)
A SINGLE LAYER BIOFUEL CELL AS POTENTIAL COATING FOR IMPLANTABLE LOW POWER DEVICES (2008) (3)
Effect of quinone depletion on lifetime spectra in photosynthetic reaction centers (1991) (3)
Capacitive detection of nanoliter droplets on the fly - investigation of electric field during droplet formation using CFD-simulation (2011) (3)
Rapid Diagnosis of Respiratory Tract Infections Using a Point-of-Care Platform Incorporating a Clinical Decision Support Algorithm (2020) (3)
Online process control for centrifugal micromixing (2005) (3)
Laser micromachining as a metallization tool for microfluidic polymer stacks (2013) (3)
Characterization of CRISPR/Cas9 RANKL knockout mesenchymal stem cell clones based on single-cell printing technology and Emulsion Coupling assay as a low-cellularity workflow for single-cell cloning (2020) (3)
BLOW MOLDING OF POLYMER FOILS FOR RAPID PROTOTYPING OF MICROFLUIDIC CARTRIDGES (2008) (3)
Integrated process control for highly parallel and contact-free micro array printing (2005) (3)
A Non-Invasive Single Cell Dispensing Approach for 2-Dimensional Micro-Patterning (2010) (3)
MICROFLUIDIC UNIDIRECTIONAL PNEUMATIC SWITCH FOR AUTOMATED DNA-EXTRACTION ON STANDARD LABORATORY CENTRIFUGES (2009) (3)
Non-contact volume determination of free flying nanoliter droplets using an adjustable capacitive measurement bridge (2011) (3)
Microfluidics and Beyond – Devices for Applications in Biotechnology - (2004) (3)
The LabDisk - A Fully Automated Centrifugal Lab-on-a-Chip System for the Detection of Biological Threats (2012) (3)
Bubble jet printhead with integrated polyimide nozzle plate (2005) (3)
Biofuel cells for the energy supply of distributed systems : State-ofthe-Art and applications (2010) (3)
Micro structured flow field for passive water management in miniaturized PEM fuel cells (2007) (3)
A modular diffusion barrier based on phase separation for localized delivery of discrete drug volumes in aqueous environments. (2009) (2)
3D microfluidic cartridges by gas pressure assisted thermal bonding of microthermoformed films (2013) (2)
Point-of-Care System for HTLV-1 Proviral Load Quantification by Digital Mediator Displacement LAMP (2021) (2)
On-demand electrophoretic separation of DNA in written gel lines on planar substrates (2013) (2)
Electrodes: A Combination of X‐Ray Tomography and Carbon Binder Modeling: Reconstructing the Three Phases of LiCoO2 Li‐Ion Battery Cathodes (Adv. Energy Mater. 8/2014) (2014) (2)
Microfluidic One-Pot Digital Droplet FISH Using LNA/DNA Molecular Beacons for Bacteria Detection and Absolute Quantification (2022) (2)
Isothermal Polymerase Amplification in a Centrifugal Microfluidic Foil Cartridge (2009) (2)
REACTION-SPECIFIC PLATINUM ELECTRODES FOR IMPLANTABLE GLUCOSE FUEL CELLS: VERSATILE FABRICATION BY CYCLIC ELECTRODEPOSITION (2010) (2)
Teflon-carbon black as new material for the hydrophobic patterning of polymer labs-on-a-chip (2009) (2)
Hybrid fabrication of microfluidic chips based on COC, silicon and TMMF dry resist (2010) (2)
Intraoral Drug Delivery Microsystem (2009) (2)
A FLEXIBLE METHOD FOR RAPID-PROTOTYPING OF PDMS MICROFLUIDIC CHIPS USING DIRECT-WRITING FOR GENERATION OF POLYMER-MASTER-STRUCTURES (2013) (2)
Automated library preparation for whole genome sequencing by centrifugal microfluidics. (2021) (2)
Smartphone-based in vitro diagnostic technologies for personalized healthcare monitoring and management (2016) (2)
Direct printing of electrical connections from metal melts using StarJet technology (2017) (2)
MICROFLUIDIC APP FEATURING NESTED PCR FOR FORENSIC SCREENING ASSAY ON OFF-THE-SHELF THERMOCYCLER (2013) (2)
MICROFLUIDIC LAB-ON-A-CHIP SYSTEM WITH INTEGRATED SAMPLE PREPARATION FOR PROCESSING IMMUNOASSAYS (2010) (2)
Solvent Bonding of Polymer Combinations for Micromedical Applications (2011) (2)
Microthermoforming and Sealing of COP Films to Form Thin Walled Lab-On-A-Chip Cartridges (2011) (2)
DIRECT ON-DISK WIRELESS TEMPERATURE MEASUREMENT FOR CENTRIFUGAL MICROFLUIDIC PLATFORMS (2010) (2)
Miniaturization, Parallelization, and Automation of Endotoxin Detection by Centrifugal Microfluidics. (2021) (2)
Vacuum supported liquid waste handling for dna extraction on centrifugally operated Lab-on-a-Chip systems (2009) (2)
G-index: A new metric to describe dynamic refractive index effects in HPLC absorbance detection. (2018) (2)
Thermal Bubble Jet Printhead with Integrated Nozzle Plate (2004) (2)
CENTRIFUGO-THERMOPNEUMATIC LIQUID ACTUATION FOR MICROFLUIDIC GENOTYPING OF NUCLEIC ACIDS (2011) (2)
ENHANCING THE LIFETIME OF LACCASE-BASED BIOFUEL CELL CATHODES BY SEQUENTIAL RENEWAL OF ENZYME (2009) (2)
Automated and miniaturized detection of biological threats with a centrifugal microfluidic system (2012) (2)
Droplet break-up with negative momentum Fluid Dynamics Videos (2012) (2)
CELLJET : LABEL-FREE CELL PRINTING VIA REAL-TIME IMPEDANCE FLOW CYTOMETRY FOR SINGLE CELL ANALYSIS (2012) (2)
A NOVEL FABRICATION ROUTE YIELDING SELF-SUPPORTING POROUS PLATINUM ANODES FOR IMPLANTABLE GLUCOSE MICRO FUEL CELLS (2007) (2)
Microfluidic Proximity Ligation Assay for Profiling Signaling Networks with Single-Cell Resolution. (2015) (2)
NOVEL STRUCTURE FOR PASSIVE CO 2 DEGASSING IN μ DMFC (2005) (2)
Fabrication Chain for Prototyping of Microfluidic Chips in Polymers (2005) (2)
Mediator probe PCR: detection of real-time PCR by label-free probes and a universal fluorogenic reporter. (2014) (2)
Wafer Level Fabrication of an Integrated Microdispenser with Electrical Impedance Detection for Single-cell Printing (2012) (2)
EndoMediskop. Trans-Endoscopic Microinjection for Flexible Endoscopy (2012) (1)
SAMPLE-TO-ANSWER LABDISK FOR POINT-OF-CARE ANALYSIS OF TOTAL CHOLESTEROL FROM WHOLE BLOOD (2012) (1)
Smartphone-based rapid and highly sensitive immunoassay for human fetuin A (2015) (1)
The MRD disk: automated minimal residual disease monitoring by highly sensitive centrifugal microfluidic multiplex qPCR. (2020) (1)
Dispensing of cells for highly parallel production of living cell microarrays (2005) (1)
Paper‐based open microfluidic platform for protein electrophoresis and immunoprobing (2021) (1)
Real-Time Detection of Tumor Cells during Capture on a Filter Element Significantly Enhancing Detection Rate (2021) (1)
Direct Printing of Conductive Metal Lines from Molten Solder Jets via StarJet Technology on Thin, Flexible Polymer Substrates (2018) (1)
FULLY AUTOMATED STICK-PACKAGING FOR PRECISE LIQUID REAGENT PRE-STORAGE AND RELEASE IN LAB-ON-A-CHIP DISPOSABLES (2015) (1)
MICROHEATER-MEDIATED MECHANICAL SINGLE-CELL LYSIS (2011) (1)
Single-use flow sensor based on the differential pressure principle employing the radial expansion of a low-cost silicone tube (2017) (1)
Tomography Aided Development of Membrane Electrode Assemblies for PEM Water Electrolysis (2017) (1)
Cover Feature: Pulsed Electrodeposition of Highly Porous Pt Alloys for use in Methanol, Formic Acid, and Glucose Fuel Cells (ChemElectroChem 7/2018) (2018) (1)
Cover Picture: Overcoming Bottlenecks of Enzymatic Biofuel Cell Cathodes: Crude Fungal Culture Supernatant Can Help to Extend Lifetime and Reduce Cost (ChemSusChem 7/2013) (2013) (1)
Fully integrated dilution series generation on a laboratory centrifuge (2011) (1)
Near-wall velocity of suspended particles in microchannel flow (2008) (1)
Lab on a Chip Centrifugal microfluidic system for primary amplification and secondary real-time PCR † (2010) (1)
Analysis of the metallic structure of microspheres produced by printing of aluminum alloys from the liquid melt (2018) (1)
PRE-STORAGE AND RELEASE OF PURIFICATION REAGENTS FOR FULL “ HANDS-OFF ” INTEGRATION OF DNA / RNA ASSAYS ON THE LABDISK PLATFORM (2014) (1)
ImmunoDisk—A Fully Automated Bead-Based Immunoassay Cartridge with All Reagents Pre-Stored (2022) (1)
Smart pressure driven and regulated dispenser for the nanoliter and microliter range (2012) (1)
“Lab-on-a-Chip Foundry Service”: A Systematic Approach to the Development of Centrifugal Microfluidic Technologies (2008) (1)
Contact-Free Dispensing of Living Cells in Nanoliter Droplets (2008) (1)
Pressure Transducer for Medical Applications Employing Radial Expansion of a Low-cost Polymer Tube (2015) (1)
2.09 – Liquid Micropumps (2008) (1)
Digital Hydraulic Drive for microfluid large-scale integration system based on shape memory alloy actuators (2017) (1)
SINGLE-MOLECULE PCR IN A PICOWELL ARRAY SIMULTANIOUSLY IMMOBILIZING PCR PRODUCTS TO A PDMS COVERSLIDE (2011) (1)
Blocking Protein Adsorption in Microfluidic Chips by a Hydrophobin Coating (2021) (1)
Microfluidic solutions for miniaturization, integration, automation and parallelization of tests on commercially available instruments (2011) (1)
Stringent Base Specific and Optimization-Free Multiplex Mediator Probe ddPCR for the Quantification of Point Mutations in Circulating Tumor DNA (2021) (1)
Pico-Injector for the Discrete Chemical Stimulation of Individual Cells with a High Temporal and Spatial Resolution (2009) (1)
ULTRA HIGH FLEXIBLE UV-VIS RADIATION SOURCE AND NOVEL DETECTION SCHEMES FOR SPECTROPHOTOMETRIC HPLC DETECTION (2013) (1)
Robust and MRI compatible electro-fluidic microprobe systems used for behavioral neuroscience (2009) (1)
Holographic PIV/PTV for nano flow rates–A study in the 70 to 200 nL/min range (2022) (1)
Deep Learning-Assisted Nephrotoxicity Testing with Bioprinted Renal Spheroids (2022) (1)
Simulation Toolkit for Micro-Fluidic Pumps using Lumped Models (2005) (1)
A HIGHLY PARALLEL NANOLITER DISPENSING SYSTEM FABRICATED BY HIGH-SPEED MICROMILLING OF POLYMERS (2004) (1)
A rapid one-step kinetics-based immunoassay procedure for the highly-sensitive detection of C-reactive protein (2014) (1)
Nanoliter Dispensing on Pipetting Workstations by Disposable PipeJet-Tips (2012) (1)
Magnetophoresis in Centrifugal Microfluidics at Continuous Rotation for Nucleic Acid Extraction (2022) (1)
A CALIBRATION-FREE , DISPOSABLE , NON-CONTACT REAGENT DOSING CARTRIDGE FOR THE SUB-μ L RANGE (2012) (1)
BUBBLE-JET ACTUATED CELL SORTING (2011) (1)
TIR-Based Dynamic Liquid-Level and Flow-Rate Sensing and its Application on Centrifugal Microfluidic Platforms (2009) (1)
ON THE WAY TO A FULLY INTEGRATED DNA-PURIFICATION SYSTEM ON A STANDARD LABORATORY CENTRIFUGE (2010) (1)
Gene expression based molecular test proves clinical validity as diagnostic aid for the differential diagnosis of psoriasis and eczema in formalin fixed and paraffin embedded tissue (2022) (1)
Compact Model of a Laminar Micro Mixer (2005) (1)
Bioprinting-based automated deposition of single cancer cell spheroids into oxygen sensor microelectrode wells. (2022) (1)
Automation of peptide desalting for proteomic liquid chromatography - tandem mass spectrometry by centrifugal microfluidics. (2021) (1)
Facile Fabrication of Ultra Porous Platinum Electrodes and Their Application for Energy Harvesting Glucose Fuel Cells (2008) (1)
A DISPOSABLE DISCRETE-AGENT-RELEASE CARTRIDGE FOR FLEXIBLE ENDOSCOPES (2010) (1)
Labslice XL – A Centrifugal Microfluidic Cartridge for the Automated Bio-Chemical Processing of Industrial Process Water (2019) (1)
A Functional Blister-Pack LabDisk System for Point of Care Testing (2012) (1)
Two Microfluidic Platforms for Miniaturization , Integration and Automation of Assays (2009) (1)
An analytical model for void-free priming of microcavities (2020) (1)
DISCRETE STIMULATION OF SINGLE PROTOPLAST CELLS BY HIGHLY RESOLVED DRUG RELEASE (2008) (1)
Material Influences Diffusivity and Conductivity Values How Coarsening the 3 D Reconstruction of a Porous service (2012) (0)
Applications Poster ( Bio-analytical systems ) THE LAB-ONA-CHIP DESIGN & FOUNDRY SERVICE (2014) (0)
ASIMPLEOPTO-FLUIDICSWITCHDETECTING LIQUIDFILLINGINPOLYMER-BASEDMICROFLUIDICSYSTEMS (2007) (0)
A Capacitive Readout Circuit for a Disposable Low-Cost Pressure and Flow Sensor with 200 Pa or 170 nl/s Resolution (2019) (0)
MICROFLUIDICS : AN AUTOMATED PLATFORM FOR THE DYNAMIC GENERATION OF FLUIDIC STRUCTURES DOWN TO THE SUB-nL-RANGE (2014) (0)
Coriolis-Induced Flow Control in Centrifugal Microfluidics (2000) (0)
AUTOMATED ON-SITE DETECTION OF ORGANOPHOSPHOROUS PESTICIDES IN REAL FOOD SAMPLES (2013) (0)
Micro-Fluidic Platforms (2006) (0)
Modeling micropumps with electrical equivalent networks (2017) (0)
Effective Acoustic Field Generation in Disposable Dispensing Cartridges for Acoustophoretic Particle Focusin (2019) (0)
SELF-BLOCKING VALVE FOR A HIGHLY WETTING FLUID BASED ON PINNING OF GAS ENTRAPMENTS (2009) (0)
irect three-dimensional reconstruction of a nanoporous catalyst layer for a olymer electrolyte fuel cell (2010) (0)
PASSIVE WATER MANAGEMENT SYSTEM FOR PEM FUELCELLS USING MICROSTRUCTURES (2008) (0)
Corrigendum to “Using planktonic microorganisms to supply the unpurified multi-copper oxidases laccase and copper efflux oxidases at a biofuel cell cathode” [Bioresour. Technol. 158 (2014) 231–238] (2015) (0)
TIR-BASED DYNAMIC LIQUID-LEVEL AND FLOWRATE SENSING AND ITS APPLICATION ON CENTRIFUGAL MICROFLUIDIC PLATFORMS 1 l 1 (2009) (0)
A SingleLayerGlucoseFuel Cell Intended asPowerSupplying Coating forMedical Implants (2011) (0)
CENTRIFUGO-PNEUMATIC HANDLING OF MICROPARTICLES WITHOUT EXTERNAL ACTUATION AS A NEW UNIT OPERATION FOR CENTRIFUGAL MICROFLUIDICS (2014) (0)
Exploitation and commercialization within the EU FP7 project PASCA. (2013) (0)
SURFACE BATCH CRYSTALLIZATION OF PROTEINS ON AN AUTOMATED NON-CONTACT nL-DISPENSER SETUP (2015) (0)
Leukocyte enrichment based on a modified pinched flow fractionation approach (2012) (0)
Atmospheric Photopolymerization of Acrylamide Enabled by Aqueous Glycerol Mixtures: Characterization and Application for Surface-Based Microfluidics (2017) (0)
Apparatus and method for spatially resolved chemical stimulation (2004) (0)
Monodisperse microparticle generation from aqueous solutions (2011) (0)
Validation of scRNA-seq by scRT-ddPCR using the example of ErbB2 in MCF7 cells (2022) (0)
Eliminating viscosity bias in lateral flow tests (2021) (0)
A PICOLITER DISPENSER WITH DISPOSABLE CARTRIDGES FOR PRECISE AND CONTACT-FREE INJECTION OF DNA INTO OPEN MICROFLUIDIC STRUCTURES (2014) (0)
Integration of microneedle-arrays and micro pumps in disposable and cheap drug delivery devices (2009) (0)
Single-cell dispensing and ‘real-time’ cell classification using convolutional neural networks for higher efficiency in single-cell cloning (2020) (0)
Smartphone-based colorimetric readers for cost-effective in vitro diagnostics (2015) (0)
Versatile-deployable bacterial detection system for food and environmental safety based on LabTube-automated DNA purification , LabReader-integrated amplification and readout (2014) (0)
Pneumatic siphon valving and switching in centrifugal microfluidics controlled by rotational frequency or rotational acceleration (2015) (0)
PREDICTABLE AND DEFINED MICRO-GRADIENTS IN LIQUID ENVIRONMENT FOR CHEMICAL SINGLE CELL STIMULATION (2009) (0)
Device for the storage and dermal administration of a substance (2008) (0)
STARJET-BASED , PNEUMATICALLY ACTUATED LIQUID METAL DROPLET PRINTING AT UP TO 500 ° C (2014) (0)
Microfluidic for Lab-ona-Chip (2007) (0)
Apparatus and method for determining the volum (2006) (0)
Clinical Evaluation of a Telemedically Linked Intraoral Drug Delivery System (0)
MASSIVELY-PARALLEL DIGITAL SOLID-PHASE PCR FOR THE IN-SITU GENERATION OF A SEQUENCING-READY PICOWELL ARRAY CIRCUMVENTING emPCR (2013) (0)
Plenary lectures info: Abstracts and biographies (2011) (0)
Loughborough University Institutional Repository Manufacture of chitosan microbeads using centrifugally driven ow of gel-forming solutions through a polymeric micronozzle (2017) (0)
Centrifugal LabTube platform for fully automated DNA purification and LAMP amplification based on an integrated, low-cost heating system (2014) (0)
Microfluidic Platforms for Miniaturization , Integration and Automation of Biochemical Assays (2007) (0)
Lab-ona-chip disposable cartridges for DNA purification and genotyping processed in standard laboratory instruments (2012) (0)
Advanced minimal residual disease monitoring for acute lymphoblastic leukemia with multiplex mediator probe PCR. (2021) (0)
Apparatus and method for dosing small amounts of liquid (2002) (0)
Nanoliter & picoliter liquid handling (2003) (0)
Direct on-chip storage and release of liquid reagents for diagnostic lab-on-a-chip devices (2014) (0)
Prolongation of electrode lifetime in biofuel cells by periodic enzyme renewal (2012) (0)
Disc-shaped Point-of-Care platform for infectious disease diagnosis (DiscoGnosis) | ConsortiaPedia (2013) (0)
Wafer-Level Fabrication of Microfluidic Sensors for Impedance Spectroscopy with Integrated Opposing Electrodes (2011) (0)
Additional contributions from: Nobel Symposium 162 - Microfluidics (2018) (0)
FABRICATING DNA MICROARRAYS BY COPYING A NEXT GENERATION SEQUENCING CHIP (2012) (0)
DISPOSABLE LABTUBE CARTRIDGES FOR AUTOMATED PROTEIN PURIFICATION IN STANDARD LAB CENTRIFUGES (2013) (0)
Platform for lab-ona-chip systems based on integrated active valves made in polymers suitable for mass production (2009) (0)
Graphene-based C-reactive protein immunoassay with smartphone readout (2015) (0)
CENTRIFUGAL MICROFLUIDIC STEP EMULSIFICATION FOR DIGITAL DROPLET RECOMBINASE POLYMERASE AMPLIFICATION (2015) (0)
Nanotechnology-Based Biosensors and Diagnostics: Technology Push versus Industrial/Healthcare Requirements (2012) (0)
Rapid Immunodiagnostic Kits based on proprietary 1-step chemistry for covalent and leach-proof antibody immobilisation (2013) (0)
Nanobead handling on a centrifugal microfluidic LabDisk for automated extraction of cell-free circulating DNA with high recovery rates. (2023) (0)
Reconstruction of the Active Material, Binder and Pore Space of a LiCoO2 Li-Ion Battery Cathode (2012) (0)
Characterization of liquid jet injection into tissue based on optical coherence tomography (2013) (0)
LABDISK INTEGRATED DNA EXTRACTION FROM WHOLE BLOOD USING MAGNETIC PARTICLES (2012) (0)
MULTIPLEX DETECTION OF KRAS POINT MUTATIONS FROM TUMOR CELL DNA ON A CENTRIFUGAL MICROFLUIDIC CARTRIDGE ( GENESLICE ) FOR CHOICE OF PERSONALIZED CANCER THERAPY (2013) (0)
Optimized Creation of Monolayers for Parallel Readout of Bead-Based Assays (2004) (0)
STARJET:PNEUMATICDISPENSING OFNANO-TO PICOLITERDROPLETSOFLIQUIDMETAL (2009) (0)
Fuel Cells: Cerium Oxide Decorated Polymer Nanofibers as Effective Membrane Reinforcement for Durable, High‐Performance Fuel Cells (Adv. Energy Mater. 6/2017) (2017) (0)
Microfluidics and Beyond (2004) (0)
AUTOMATIC FOOD-PATHOGEN DETECTION ON A CENTRIFUGAL MICROFLUIDIC CARTRIDGE IN A COMMERCIALLY AVAILABLE PCR THERMOCYCLER (2013) (0)
AN INTEGRATED LAB-ONA-CHIP SYSTEM WITH DNA EXTRACTION , PRE-AND MAIN PCR AMPLIFICATION FOR AUTOMATED DETECTION OF LOW CONCENTRATED PATHOGENS (2013) (0)
Automation of a magnetic immuno-PCR on a centrifugal point-of-care analyzer (2015) (0)
Effect of Electrode Morphology on the Electrochemical Performance of Lithium-Ion Batteries (2010) (0)
DEVELOPMENT OF AN ACTIVE MICROMIXER USING AN EXTERNAL MECHANICAL ACTUATOR ARRAY (2012) (0)
RHEOPLUG - SEGMENTED FLOW BASED VISCOMETER (2009) (0)
CONTINUOUS MICROFLUIDIC DNA PURIFICATION FOR ONLINE MONITORING AND PROCESS CONTROL (2011) (0)
Stacking of beads into monolayers by flow through flat microfluidic chambers (2003) (0)
Integrated workflow of downscaled Smart-seq 2 and absolute quantitative , 1 single-cell digital PCR validates lack of representability of low-abundant 2 transcripts (2022) (0)
Apparatus and method for producing a replica or a derivative of an array of molecules and uses thereof (2009) (0)
HIGH-PERFORMANCE FLOW-THROUGH DNA PURIFICATION ON A MICROFLUIDIC CHIP (2010) (0)
Bubble Jet agent release cartridge for chemical single cell stimulation (2012) (0)
Smaller structures taking the lead - analysis and simulation of structure size influences on binding kinetics down to the single molecule level (2010) (0)
Improving segmentation of PEMFC x-ray tomographies (2013) (0)
Microdosing and process for metered duty liquids (2004) (0)
Microfluidic fluid handling apparatus (2007) (0)
Corrigendum to “Fabrication of highly porous platinum electrodes for micro-scale applications by pulsed electrodeposition and dealloying” [J. Power Sources 242 (2013) 255–263] (2014) (0)
Multi-scale Correlative Tomography of Li-Ion Battery Cathode Morphology (2015) (0)
二維陣列壓電噴墨頭之特性探討 = Studies on the characteristic of two-dimentional array piezoelectric inkjet head 葉學偉、鄭江河 (2014) (0)
Fluidic control systems PRESSURE DRIVEN AND REGULATED DISPENSER FOR THE MICROLITER RANGE (2012) (0)
Sensors ONLINE LIQUID CALIBRATION TECHNOLOGIES (2013) (0)
A Drop-on-Demand Bioprinting Approach to Spatially Arrange Multiple Cell Types and Monitor Their Cell-Cell Interactions towards Vascularization Based on Endothelial Cells and Mesenchymal Stem Cells (2022) (0)
Method and apparatus for handling a liquid sample using a rotation with a time-varying rotation vector (2005) (0)
Device for insertion into a rotor of a centrifuge, centrifuge and process for fluidly coupling cavities (2010) (0)
Applications SEMI-CONTACT WRITING TECHNOLOGY & APPLICATIONS (2014) (0)
Pneumatic dispensing of nano- to picoliter droplets of liquid metal with the StarJet method for rapid prototyping of metal microstructures (2011) (0)
System-level network simulation for robust centrifugal-microfluidic lab-ona-chip systems – Electronic supplement (0)
REAL-TIME PCR BASED FOOD PATHOGEN DETECTION ON A CENTRIFUGAL MICROFLUIDIC FOIL DISK INCLUDING POSITIVE- AND NO-TEMPLATE-CONTROLS (2011) (0)
MICROFLUIDIC APP FOR BUFFY COAT EXTRACTION FROM LARGE PERIPHERAL BLOOD SAMPLES FOR LOW-ABUNDANCE LIVING-CELL ANALYSIS (2015) (0)
One drop of blood : Lab-on-a-chip system for rapid diagnostics (2006) (0)
Devices and methods for generating fluid assemblies from fluids (2003) (0)
Improved Machine Vision for Single Cell Printing (2011) (0)
A MODULAR DISPENSING SYSTEM FOR LEAKAGE-FREE PICOLITER DROPLET RELEASE IN LIQUID ENVIRONMENTS (2008) (0)
Rapid Assessment of Combined Drop on Demand and Extrusion-based Bioprinting with Controlled Shear Stress and High Shape Fidelity (2019) (0)
Integration of Isothermal Polymerase Amplification into a Centrifugal Microfluidic Cartridge (2009) (0)
Digital low-cost Time Domain Reflectometer circuit optimized for use in field applications (2012) (0)
A novel fabrication method for hybrid, microfluidic devices (2005) (0)
OPTICAL CLEARANCE OF SPHEROIDS ON CHIP (2015) (0)
Using microorganisms to harvest electricity-Towards a self-regenerating enzymatic cathode (2011) (0)
Integrated Instrument for Printing Single Cells and Hydrogel Matrices for Future Tissue Engineering (2011) (0)
Automatic Single Cell Printing for Tissue Engineering and Stem Cell Research (2008) (0)
Direct Drop-on-Demand Printing of Molten Solder Bumps on ENIG Finishing at Ambient Conditions Through StarJet Technology (2020) (0)
ENABLING DNA-MICROARRAYS IN POLYMERIC LAB-ON-A-CHIP SUB- STRATES FOR MULTIPLEXED TARGET ANALYSIS VIA SOLID-PHASE PCR (2011) (0)
COARSE GRID MODELLING OF CAPILLARY DRIVEN TWO-PHASE FLOW IN DIRECT METHANOL FUEL CELLS (2008) (0)
Three dimensional Reconstruction of PEFC Catalyst Layers (2010) (0)
Smartphone and tablet based point-of-care in vitro diagnostics and devices for mobile healthcare (2014) (0)
Picoliter Droplet Dispenser with Integrated Impedance Detector for Single-cell Printing (2012) (0)
Droplet generation at the critical Weber number (2012) (0)
CENTRIFUGAL LABTUBE FOR FULLY AUTOMATED DNA EXTRACTION & LAMP AMPLIFICATION BASED ON AN INTEGRATED, LOW-COST HEATING SYSTEM (2013) (0)
SAXS-LABDISK : A CENTRIFUGAL MICROFLUIDIC SCREENING PLATFORM FOR PROTEIN STRUCTURE ANALYSIS (2012) (0)
LOW-COST BACTERIAL DETECTION SYSTEM FOR FOOD SAFETY BASED ON AUTOMATED DNA EXTRACTION, AMPLIFICATION AND READOUT (2013) (0)
Particle sedimentation and method for performing a particle sedimentation (2004) (0)
A highly integrated nanoliter dispensing system for fast liquid handling (2003) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Roland Prof. Dr. Zengerle?

Roland Prof. Dr. Zengerle is affiliated with the following schools:

University of Freiburg

Roland Prof. Dr. Zengerle's Academic­Influence.com Rankings

Roland Prof. Dr. Zengerle's Degrees

Why Is Roland Prof. Dr. Zengerle Influential?

Roland Prof. Dr. Zengerle's Published Works

Published Works

What Schools Are Affiliated With Roland Prof. Dr. Zengerle?

Roland Prof. Dr. Zengerle's AcademicInfluence.com Rankings