Rolf Dr. Brendel

Q: What Schools Are Affiliated With Rolf Dr. Brendel

Rolf Dr. Brendel is affiliated with the following schools: Leibniz University Hannover

Rolf Dr. Brendel's AcademicInfluence.com Rankings

Rolf Dr. Brendel

Physics

#6340

World Rank

#8271

Historical Rank

physics Degrees

Download Badge

Physics

Rolf Dr. Brendel's Degrees

PhD Materials Science and Engineering University of California, Berkeley
Masters Physics Stanford University
Bachelors Physics Stanford University

Why Is Rolf Dr. Brendel Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Rolf Dr. Brendel's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Surface passivation of high‐efficiency silicon solar cells by atomic‐layer‐deposited Al2O3 (2008) (390)
Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells (2018) (379)
An infrared dielectric function model for amorphous solids (1992) (284)
Uncertainty analysis for the coefficient of band-to-band absorption of crystalline silicon (2015) (278)
19%‐efficient and 43 µm‐thick crystalline Si solar cell from layer transfer using porous silicon (2012) (253)
Electronic and chemical properties of the c-Si/Al2O3 interface (2011) (213)
Surface passivation of crystalline silicon solar cells: Present and future (2018) (212)
Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions (2014) (192)
Effective surface passivation of crystalline silicon using ultrathin Al2O3 films and Al2O3/SiNx stacks (2009) (179)
Working principle of carrier selective poly-Si/c-Si junctions: Is tunnelling the whole story? (2016) (171)
Series resistance imaging of solar cells by voltage dependent electroluminescence (2007) (157)
Recombination current and series resistance imaging of solar cells by combined luminescence and lock-in thermography (2007) (123)
Ion Implantation for Poly-Si Passivated Back-Junction Back-Contacted Solar Cells (2015) (121)
Solar cell efficiency and carrier multiplication in Si1−xGex alloys (1998) (121)
20.1%‐efficient crystalline silicon solar cell with amorphous silicon rear‐surface passivation (2005) (120)
19.4%‐efficient large‐area fully screen‐printed silicon solar cells (2011) (120)
Towards 20% efficient large‐area screen‐printed rear‐passivated silicon solar cells (2012) (112)
Contact Selectivity and Efficiency in Crystalline Silicon Photovoltaics (2016) (109)
Photoconductance‐calibrated photoluminescence lifetime imaging of crystalline silicon (2008) (108)
Quantum efficiency analysis of thin-layer silicon solar cells with back surface fields and optical confinement (1996) (105)
Thin-Film Crystalline Silicon Solar Cells: Physics and Technology (2003) (105)
Very low surface recombination velocities on p- and n-type c-Si by ultrafast spatial atomic layer deposition of aluminum oxide (2010) (97)
Laser ablation of SiO2 for locally contacted Si solar cells with ultra‐short pulses (2007) (96)
Review of Layer Transfer Processes for Crystalline Thin-Film Silicon Solar Cells (2001) (93)
Efficient interdigitated back‐contacted silicon heterojunction solar cells (2011) (87)
Sensitivity and transient response of microwave reflection measurements (1995) (85)
Modeling solar cells with the dopant‐diffused layers treated as conductive boundaries (2012) (84)
Advances in the Surface Passivation of Silicon Solar Cells (2012) (84)
A Roadmap Toward 24% Efficient PERC Solar Cells in Industrial Mass Production (2017) (82)
Dynamic carrier lifetime imaging of silicon wafers using an infrared-camera-based approach (2008) (81)
Zinc tin oxide as high-temperature stable recombination layer for mesoscopic perovskite/silicon monolithic tandem solar cells (2016) (79)
Junction resistivity of carrier selective polysilicon on oxide junctions and its impact on the solar cell performance (2017) (78)
Surface passivation of phosphorus‐diffused n+‐type emitters by plasma‐assisted atomic‐layer deposited Al2O3 (2012) (77)
Interpretation of recombination at c-Si/SiNx interfaces by surface damage (2010) (75)
Contact passivation in silicon solar cells using atomic‐layer‐deposited aluminum oxide layers (2011) (74)
Comparison of the thermal stability of single Al2O3 layers and Al2O3/SiNx stacks for the surface passiviation of silicon (2011) (74)
Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polarities (2017) (73)
Evolution of the microstructure during annealing of porous silicon multilayers (2004) (72)
Space-charge region-dominated steady-state photoconductance in low-lifetime Si wafers (2003) (69)
On the thickness dependence of open circuit voltages of p-n junction solar cells (1993) (69)
High-rate atomic layer deposition of Al2O3 for the surface passivation of Si solar cells (2011) (69)
Luminescence emission from forward- and reverse-biased multicrystalline silicon solar cells (2009) (68)
Picosecond laser ablation of SiO2 layers on silicon substrates (2010) (66)
Parasitic Absorption in Polycrystalline Si-layers for Carrier-selective Front Junctions (2016) (65)
Theory of analyzing free energy losses in solar cells (2008) (65)
26.1%‐efficient POLO‐IBC cells: Quantification of electrical and optical loss mechanisms (2019) (65)
21.2%‐efficient fineline‐printed PERC solar cell with 5 busbar front grid (2014) (64)
Improvement of the SRH bulk lifetime upon formation of n-type POLO junctions for 25% efficient Si solar cells (2017) (63)
A Simple Model Describing the Symmetric $I\hbox{--}V$ Characteristics of $\hbox{p}$ Polycrystalline Si/ $\hbox{n}$ Monocrystalline Si, and $\hbox{n}$ Polycrystalline Si/ $\hbox{p}$ Monocrystalline Si Junctions (2014) (59)
Surface passivation of n-type Czochralski silicon substrates by thermal-SiO2/plasma-enhanced chemical vapor deposition SiN stacks (2010) (57)
Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide (2017) (57)
Analytical model for the diode saturation current of point‐contacted solar cells (2006) (56)
Reassessment of intrinsic lifetime limit in n-type crystalline silicon and implication on maximum solar cell efficiency (2018) (53)
On the recombination behavior of p+‐type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces (2017) (53)
A simple method for pinhole detection in carrier selective POLO-junctions for high efficiency silicon solar cells (2017) (53)
Note on the interpretation of injection-level-dependent surface recombination velocities (1995) (52)
Injection dependence of the effective lifetime of n-type Si passivated by Al2O3: An edge effect? (2014) (51)
Contact Formation and Recombination at Screen-Printed Local Aluminum-Alloyed Silicon Solar Cell Base Contacts (2011) (51)
Separating the two polarities of the POLO contacts of an 26.1%-efficient IBC solar cell (2020) (51)
Laser structuring for back junction silicon solar cells (2007) (51)
Optical Constants of UV Transparent EVA and the Impact on the PV Module Output Power under Realistic Irradiation (2016) (50)
Modeling light trapping and electronic transport of waffle-shaped crystalline thin-film Si solar cells (1999) (49)
Implementation of n+ and p+ Poly Junctions on Front and Rear Side of Double-Side Contacted Industrial Silicon Solar Cells (2016) (49)
Radiative efficiency limit of terrestrial solar cells with internal carrier multiplication (1995) (49)
Thin-film crystalline silicon mini-modules using porous Si for layer transfer (2004) (49)
Thermal conductivity of sintered porous silicon films (2006) (48)
Use of digital image correlation technique to determine thermomechanical deformations in photovoltaic laminates: Measurements and accuracy (2010) (47)
Sintering of porous silicon (2003) (47)
Experimental setup for camera-based measurements of electrically and optically stimulated luminescence of silicon solar cells and wafers. (2011) (47)
Lifetime mapping of Si wafers by an infrared camera [for solar cell production] (2000) (47)
Simulated Annealing of Porous Silicon (2000) (46)
Structural changes in porous silicon during annealing (2003) (46)
Recombination Behavior of Photolithography-free Back Junction Back Contact Solar Cells with Carrier-selective Polysilicon on Oxide Junctions for Both Polarities (2016) (46)
Temperature-dependent contact resistance of carrier selective Poly-Si on oxide junctions (2018) (45)
Impact of surface topography and laser pulse duration for laser ablation of solar cell front side passivating SiNx layers (2010) (45)
Low‐temperature formation of local Al contacts to a‐Si:H‐passivated Si wafers (2004) (45)
Thermal stability of amorphous silicon/silicon nitride stacks for passivating crystalline silicon solar cells (2008) (45)
On the data analysis of light‐biased photoconductance decay measurements (1996) (44)
The effect of sample edge recombination on the averaged injection-dependent carrier lifetime in silicon (2012) (44)
Application of a New Ray Tracing Framework to the Analysis of Extended Regions in Si Solar Cell Modules (2013) (44)
Analytical Theory for Extracting Specific Contact Resistances of Thick Samples From the Transmission Line Method (2014) (43)
Perimeter Recombination in 25%-Efficient IBC Solar Cells With Passivating POLO Contacts for Both Polarities (2018) (43)
Breakdown of the efficiency gap to 29% based on experimental input data and modeling (2016) (43)
Evaluation of Series Resistance Losses in Screen-Printed Solar Cells With Local Rear Contacts (2011) (42)
Accurate Calculation of the Absorptance Enhances Efficiency Limit of Crystalline Silicon Solar Cells With Lambertian Light Trapping (2018) (42)
Determination of the effective diffusion length of silicon solar cells from photoluminescence (2009) (41)
Staebler–Wronski-like formation of defects at the amorphous-silicon–crystalline silicon interface during illumination (2008) (40)
Back-junction back-contact n-type silicon solar cells with screen-printed aluminum-alloyed emitter (2010) (40)
Ultrathin crystalline silicon solar cells on glass substrates (1997) (40)
Measurement of the Optical Constants of Soda-Lime Glasses in Dependence of Iron Content and Modeling of Iron-Related Power Losses in Crystalline Si Solar Cell Modules (2016) (40)
Analysis of local Al-doped back surface fields for high efficiency screen-printed solar cells (2011) (38)
Analysis and optimization of the bulk and rear recombination of screen-printed PERC solar cells (2012) (38)
Recombination at laser-processed local base contacts by dynamic infrared lifetime mapping (2010) (38)
Coupling of light into mechanically textured silicon solar cells: A ray tracing study (1995) (38)
High Efficiency N-Type Emitter-Wrap-Through Silicon Solar Cells (2011) (38)
High-quality surface passivation by corona-charged oxides for semiconductor surface characterization (1994) (37)
Mesoporous Germanium Formation by Electrochemical Etching (2009) (35)
Building Blocks for Industrial, Screen-Printed Double-Side Contacted POLO Cells With Highly Transparent ZnO:Al Layers (2018) (35)
The detailed balance principle and the reciprocity theorem between photocarrier collection and dark carrier distribution in solar cells (1998) (35)
Comparison of ICP-AlOx and ALD-Al2O3 layers for the rear surface passivation of c-Si Solar cells (2012) (34)
Simulation Tool for Equivalent Circuit Modeling of Photovoltaic Devices (2012) (34)
Recombination lifetimes in highly aluminum-doped silicon (2009) (34)
Thin‐film (25.5 μm) solar cells from layer transfer using porous silicon with 32.7 mA/cm2 short‐circuit current density (2003) (34)
Analysis of Local Aluminum Rear Contacts of Bifacial PERC+ Solar Cells (2016) (34)
Thermophysical analysis of thin films by lock-in thermography (2004) (33)
Numerical Modeling of c-Si PV Modules by Coupling the Semiconductor with the Thermal Conduction, Convection and Radiation Equations (2015) (33)
Thin macroporous silicon heterojunction solar cells (2012) (33)
Highly Predictive Modelling of Entire Si Solar Cells for Industrial Applications (2009) (32)
Dynamic photoluminescence lifetime imaging for the characterisation of silicon wafers (2011) (32)
Impact of the Rear Surface Roughness on Industrial-Type PERC Solar Cells (2012) (32)
Firing stability of SiNy/SiNx stacks for the surface passivation of crystalline silicon solar cells (2012) (32)
Atomic-layer-deposited aluminum oxide for the surface passivation of high-efficiency silicon solar cells (2008) (31)
Novel porous silicon backside light reflector for thin silicon solar cells (1998) (31)
Fineline Printing Options for High Efficiencies and Low Ag Paste Consumption (2013) (31)
Formation of aluminum–oxygen complexes in highly aluminum-doped silicon (2010) (31)
Record low ag paste consumption of 67.7 mg with dual print (2013) (31)
The challenge of crystalline thin film silicon solar cells (1995) (31)
15.4%-efficient and 25 μm-thin crystalline Si solar cell from layer transfer using porous silicon (2003) (31)
Resistive Power Loss Analysis of PV Modules Made From Halved 15.6 × 15.6 cm2 Silicon PERC Solar Cells With Efficiencies up to 20.0% (2015) (31)
Direct Laser Texturing for High-Efficiency Silicon Solar Cells (2013) (30)
Combined dynamic and steady-state infrared camera based carrier lifetime imaging of silicon wafers (2009) (30)
Textured monocrystalline thin‐film Si cells from the porous silicon (PSI) process (2001) (29)
Lift-off of free-standing layers in the kerfless porous silicon process (2013) (29)
Effective diffusion lengths for minority carriers in solar cells as determined from internal quantum efficiency analysis (1999) (29)
Buried emitter solar cell structures: Decoupling of metallisation geometry and carrier collection geometry of back contacted solar cells (2008) (29)
Macroporous Si as an absorber for thin‐film solar cells (2010) (29)
Loss analysis of emitter-wrap-through silicon solar cells by means of experiment and three-dimensional device modeling (2010) (29)
Optical absorption in crystalline Si films containing spherical voids for internal light scattering (2004) (29)
Reduced Module Operating Temperature and Increased Yield of Modules With PERC Instead of Al-BSF Solar Cells (2017) (29)
Inductively coupled plasma chemical vapour deposited AlOx/SiNy layer stacks for applications in high-efficiency industrial-type silicon solar cells (2013) (28)
New upper efficiency limits for semiconductor solar cells (1994) (28)
Analysis of Series Resistance Losses in a-Si:H/c-Si Heterojunction Solar Cells (2014) (28)
Optimized Interconnection of Passivated Emitter and Rear Cells by Experimentally Verified Modeling (2016) (27)
High Efficiency Back-Contact Back-Junction Silicon Solar Cells with Cell Thicknesses of 45 μm, 90 μm, 130μm and 290 μm (2012) (27)
Emitter saturation current densities of 22 fA/cm2 applied to industrial PERC solar cells approaching 22% conversion efficiency (2017) (27)
UV‐induced degradation of PERC solar modules with UV‐transparent encapsulation materials (2017) (27)
High-Efficiency Cells From Layer Transfer: A First Step Toward Thin-Film/Wafer Hybrid Silicon Technologies (2011) (26)
Evolutionary PERC+ solar cell efficiency projection towards 24% evaluating shadow-mask-deposited poly-Si fingers below the Ag front contact as next improvement step (2020) (26)
Quantitative infrared study of ultrathin MIS structures by grazing internal reflection (1990) (26)
Bifacial, fully screen-printed n-PERT solar cells with BF2 and B implanted emitters (2016) (26)
Progress in the surface passivation of silicon solar cells (2008) (25)
Back‐contacted bottom cells with three terminals: Maximizing power extraction from current‐mismatched tandem cells (2019) (25)
Effective passivation of highly aluminum-doped p-type silicon surfaces using amorphous silicon (2007) (25)
Recent Progress and Options for Future Crystalline Silicon Solar Cells (2013) (25)
Present status and future perspectives of bifacial PERC+ solar cells and modules (2018) (24)
Modeling the Spectral Luminescence Emission of Silicon Solar Cells and Wafers (2013) (23)
Electron microscopy analysis of crystalline silicon islands formed on screen-printed aluminum-doped p-type silicon surfaces (2008) (23)
Wet Chemical Polishing for Industrial Type PERC Solar Cells (2013) (23)
Light scattering and diffuse light propagation in sintered porous silicon (2008) (23)
NON-LINEAR MECHANICAL PROPERTIES OF ETHYLENE-VINYL ACETATE (EVA) AND ITS RELEVANCE TO THERMOMECHANICS OF PHOTOVOLTAIC MODULES (2010) (23)
Silicon surface passivation by ultrathin Al2O3 films and Al2O3/SiNx stacks (2010) (23)
Building blocks for back-junction back-contacted cells and modules with ion-implanted poly-Si junctions (2014) (23)
Dynamic photoluminescence lifetime imaging of multicrystalline silicon bricks (2012) (23)
Measuring thermomechanical displacements of solar cells in laminates using digital image correlation (2009) (22)
For none, one, or two polarities—How do POLO junctions fit best into industrial Si solar cells? (2019) (22)
Macroporous Silicon Solar Cells With an Epitaxial Emitter (2013) (21)
The ALU+ concept: N-type silicon solar cells with surface-passivated screen-printed aluminum-alloyed rear emitter (2009) (21)
Modeling the formation of local highly aluminum‐doped silicon regions by rapid thermal annealing of screen‐printed aluminum (2012) (21)
Analyzing the spectral luminescence emission of silicon solar cells and wafers (2013) (20)
Aluminum-Based Mechanical and Electrical Laser Interconnection Process for Module Integration of Silicon Solar Cells (2012) (20)
Modeling effective carrier lifetimes of passivated macroporous silicon layers (2011) (20)
Defect imaging in multicrystalline silicon using a lock-in infrared camera technique (2007) (20)
Loss analysis of back-contact back-junction thin-film monocrystalline silicon solar cells (2011) (20)
Local rear contacts to silicon solar cells by in-line high-rate evaporation of aluminum (2012) (20)
n‐type silicon solar cells with surface‐passivated screen‐printed aluminium‐alloyed rear emitter (2008) (20)
Simulation-based Efficiency Gain Analysis of 21.2%-efficient Screen-printed PERC Solar Cells (2016) (20)
Mapping of trap densities and energy levels in semiconductors using a lock-in infrared camera technique (2005) (20)
Interconnect-shingling: Maximizing the active module area with conventional module processes (2019) (20)
The ${\bf ALU}^{+}$ Concept: $N$-Type Silicon Solar Cells With Surface-Passivated Screen-Printed Aluminum-Alloyed Rear Emitter (2010) (19)
Formation of mesoporous germanium double layers by electrochemical etching for layer transfer processes (2010) (19)
Structural Investigation of Printed Ag/Al Contacts on Silicon and Numerical Modeling of Their Contact Recombination (2016) (19)
Aging behaviour of laser welded Al-interconnections in crystalline silicon modules (2012) (19)
Solar cells on low-resistivity boron-doped Czochralski-grown silicon with stabilized efficiencies of 20% (2008) (19)
From PERC to Tandem: POLO- and p+/n+ Poly-Si Tunneling Junction as Interface Between Bottom and Top Cell (2019) (18)
Optimizing the Solar Cell Front Side Metallization and the Cell Interconnection for High Module Power Output (2016) (18)
Recombination at local aluminum-alloyed silicon solar cell base contacts by dynamic infrared lifetime mapping (2011) (18)
High-Efficiency RISE-IBC Solar Cells: Influence of Rear Side-Passivation on pn-Junction Meander Recombination (2013) (18)
Internal quantum efficiency of thin epitaxial silicon solar cells (1995) (18)
Qualification of encapsulation materials for module-level-processing (2014) (18)
Analysis of the Emitter Saturation Current Density of Industrial Type Silver Screen-Printed Front Contacts (2012) (18)
Reconstruction of the surface topography of randomly textured silicon (2003) (18)
Fine-Line Printed 5 Busbar PERC Solar Cells with Conversion Efficiencies Beyond 21% (2014) (18)
Reduced Passivation of Silicon Surfaces at Low Injection Densities Caused by H-Induced Defects (2010) (17)
Void formation in screen-printed local aluminum contacts modeled by surface energy minimization (2016) (17)
Emitter recombination current densities of boron emitters with silver/aluminum pastes (2014) (17)
Laser Ablation of Passivating SINx Layers for Locally Contacting Emitters of High-Efficiency Solar Cells (2006) (17)
Analysis of photoexcited charge carrier density profiles in Si wafers by using an infrared camera (2002) (17)
Progress in emitter wrap-through solar cell fabrication on boron doped Czochralski-grown silicon (2011) (17)
Uncertainty of the coefficient of band-to-band absorption of crystalline silicon at near-infrared wavelengths (2014) (17)
Kerfless exfoliated thin crystalline Si wafers with Al metallization layers for solar cells (2015) (17)
Correlation between spatially resolved solar cell efficiency and carrier lifetime of multicrystalline silicon (2008) (17)
Modeling recombination and contact resistance of poly‐Si junctions (2020) (16)
Rear-side point-contacts by inline thermal evaporation of aluminum (2010) (16)
Numerical simulations of buried emitter back‐junction solar cells (2009) (16)
Influence of the boron emitter profile on VOC and JSC losses in fully ion implanted n‐type PERT solar cells (2015) (16)
Infrared observation of thermally activated oxide reduction within Al/SiOx/Si tunnel diodes (1992) (16)
Increased Light Harvesting by Structured Cell Interconnection Ribbons: An Optical Ray Tracing Study Using a Realistic Daylight Model☆ (2016) (16)
Analytical model for the optimization of locally contacted solar cells (2005) (16)
High Temperature Annealing of ZnO:Al on Passivating POLO Junctions: Impact on Transparency, Conductivity, Junction Passivation, and Interface Stability (2019) (15)
A Quantitative Measure for the Carrier Selectivity of Contacts to Solar Cells (2016) (15)
18.9 %-Efficient Screen-Printed Solar Cells Applying a Print-on-Print Process (2011) (15)
Laser-processed high-efficiency silicon RISE-EWT solar cells and characterisation (2009) (15)
Lambertian light trapping in thin crystalline macroporous Si layers (2014) (15)
Injection and Collection Diffusion Lengths of Polycrystalline Thin-Film Solar Cells (1999) (15)
Atmospheric Pressure Chemical Vapor Deposition of In-Situ Doped Amorphous Silicon Layers for Passivating Contacts (2018) (15)
High-quality exfoliated crystalline silicon foils for solar cell applications (2014) (15)
Degradation and Regeneration of n+-Doped Poly-Si Surface Passivation on p-Type and n-Type Cz-Si Under Illumination and Dark Annealing (2020) (15)
The origin of reduced fill factors of emitter‐wrap‐through‐solar cells (2008) (14)
Back contact monocrystalline thin-film silicon solar cells from the porous silicon process (2009) (14)
Simple prism pyramids: a new light trapping texture for silicon solar cells (1993) (14)
RISE: 21.5% Efficient Back Junction Silicon Solar Cell with Laser Technology as a Key Processing Tool (2006) (14)
Loss Analysis of n-Type Passivated Emitter Rear Totally Diffused Back-Junction Silicon Solar Cells with Efficiencies up to 21.2% (2016) (14)
Simulation-based roadmap for the integration of poly-silicon on oxide contacts into screen-printed crystalline silicon solar cells (2021) (14)
26%-efficient and 2 cm narrow interdigitated back contact silicon solar cells with passivated slits on two edges (2019) (14)
Reverse saturation current density imaging of highly doped regions in silicon: A photoluminescence approach (2012) (14)
Permanent Deactivation of the Boron-Oxygen Recombination Center in Silicon Solar Cells (2008) (14)
Surface passivation of silicon solar cells using industrially relevant Al2O3 deposition techniques (2010) (14)
Counterdoping with patterned ion implantation (2013) (14)
Influence of solder pads to PERC solar cells for module integration (2013) (14)
21.0%-efficient screen-printed n-PERT back-junction silicon solar cell with plasma-deposited boron diffusion source (2016) (13)
PV module current gains due to structured backsheets (2017) (13)
19.4% -Efficient Large Area Rear-Passivated Screen-Printed Silicon Solar Cells (2011) (13)
Lead‐free on‐laminate laser soldering: a new module assembling concept (2008) (13)
The Buried Emitter Solar Cell Concept: Interdigitated Back-Junction Structure with Virtually 100% Emitter Coverage of the Cell Area (2009) (13)
Inline High-Rate Thermal Evaporation of Aluminium for Novel Industrial Solar Cell Metallization (2010) (12)
Industrial bifacial n‐type silicon solar cells applying a boron co‐diffused rear emitter and an aluminum rear finger grid (2016) (12)
Porous Germanium Layers by Electrochemical Etching for Layer Transfer Processes of High-Efficiency Multi-Junction Solar Cells (2011) (12)
4.5 ms Effective Carrier Lifetime in Kerfless Epitaxial Silicon Wafers From the Porous Silicon Process (2017) (12)
Laser technology for cost reduction in silicon solar cell production (2006) (12)
Limits to model amphoteric defect recombination via SRH statistics (2012) (12)
Changes in hydrogen concentration and defect state density at the poly-Si/SiOx/c-Si interface due to firing (2021) (12)
21.7 % Efficient PERC Solar Cells with AlOx Tunneling Layer (2011) (12)
High-Efficiency Modules With Passivated Emitter and Rear Solar Cells—An Analysis of Electrical and Optical Losses (2017) (12)
High-efficiency back-junction silicon solar cell with an in-line evaporated aluminum front grid (2011) (12)
Al-Foil on Encapsulant for the Interconnection of Al-Metalized Silicon Solar Cells (2013) (12)
Electrical and Structural Analysis of Crystal Defects After High-Temperature Rapid Thermal Annealing of Highly Boron Ion-Implanted Emitters (2015) (11)
Camera-Based Photoluminescence Lifetime Imaging of Crystalline Silicon Wafers (2009) (11)
A method for the measurement of thin film optical constants with a spectral photometer from 230 nm to 850 nm and its application to plasma silicon (oxy) nitride (1991) (11)
Photovoltaic mini‐modules from layer transfer by the porous silicon process (2001) (11)
Trapping-related recombination of charge carriers in silicon (2010) (11)
High speed laser structuring of crystalline silicon solar cells (2009) (11)
Formation of highly aluminum-doped p-type silicon regions by in-line high-rate evaporation (2011) (11)
23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, Sept. 2008 PROGRESS IN THE SURFACE PASSIVATION OF SILICON SOLAR CELLS (2008) (11)
Autodiffusion: a novel method for emitter formation in crystalline silicon thin‐film solar cells (2007) (11)
Crystalline thin-film Si cells from layer transfer using porous Si (PSI-process) (2002) (11)
Loss analysis and improvements of industrially fabricated Cz-Si solar cells by means of process and device simulations (2011) (11)
Ultra‐Thin Poly‐Si Layers: Passivation Quality, Utilization of Charge Carriers Generated in the Poly‐Si and Application on Screen‐Printed Double‐Side Contacted Polycrystalline Si on Oxide Cells (2020) (11)
A Novel Photovoltaic-Module Assembly System for Back Contact Solar Cells Using Laser Soldering Technique (2008) (11)
Silicon wafer material options for highly efficient p-type PERC solar cells (2013) (11)
Transport analysis for polycrystalline silicon solar cells on glass substrates (1997) (11)
High-Efficiency Industrial-Type PERC Solar Cells Applying ICP AlOx as Rear Passivation Layer (2012) (10)
Reverse Saturation Current Density Imaging of Highly Doped Regions in Silicon Employing Photoluminescence Measurements (2012) (10)
MODELLING THE CURING DYNAMICS OF ETHYLENE-VINYL ACETATE (2010) (10)
716 mV Open‐Circuit Voltage with Fully Screen‐Printed p ‐Type Back Junction Solar Cells Featuring an Aluminum Front Grid and a Passivating Polysilicon on Oxide Contact at the Rear Side (2020) (10)
UV radiation hardness of photovoltaic modules featuring crystalline Si solar cells with AlOx/p+‐type Si and SiNy/n+‐type Si interfaces (2017) (10)
Reconditioning of silicon substrates for manifold re-use in the layer transfer process with porous silicon (2012) (10)
Detailed Analysis and Understanding of the Transport Mechanism of Poly-Si-Based Carrier Selective Junctions (2019) (10)
Firing-Stable PECVD SiOxNy/n-Poly-Si Surface Passivation for Silicon Solar Cells (2021) (10)
Interconnection of busbar‐free back contacted solar cells by laser welding (2015) (10)
ZnO:Al/a-SiOx front contact for polycrystalline-silicon-on-oxide (POLO) solar cells (2018) (10)
Amorphous Si/SiN double layers : a low-temperature passivation method for diffused phosphorus as well as boron emitters (2006) (10)
The concept of effective film thickness for the determination of bond concentrations from IR spectra of weakly absorbing thin films on silicon (1991) (10)
Al+‐doping of Si by laser ablation of Al2O3/SiN passivation (2013) (10)
Ion implantation of boric molecules for silicon solar cells (2015) (9)
A Modeling Approach to the Optimization of Interconnects for Back Contact Cells by Thermomechanical Simulations of Photovoltaic Modules (2008) (9)
Determination of the Collection Diffusion Length by Electroluminescence Imaging (2011) (9)
Local aluminum–silicon contacts by layer selective laser ablation (2011) (9)
Firing stability of tube furnace‐annealed n‐type poly‐Si on oxide junctions (2021) (9)
Temperature of silicon wafers during in-line high-rate evaporation of aluminum (2011) (9)
Large area macroporous silicon layers for monocrystalline thin-film solar cells (2010) (9)
Simulation of optical properties of Si wire cells (2009) (9)
Photonic crystals for highly efficient silicon single junction solar cells (2021) (9)
Sintering and reorganization of electrochemically etched mesoporous germanium layers in various atmospheres (2011) (9)
Emitter Saturation Currents of 22 fA/cm2 Applied to Industrial PERC Cells Approaching 22% Conversion Efficiency (2016) (9)
19% Efficient Thin-Film Crystalline Silicon Solar Cells From Layer Transfer Using Porous Silicon: A Loss Analysis by Means of Three-Dimensional Simulations (2012) (9)
Plasma‐deposited silicon nitride on ultrathin silicon oxide films investigated by infrared grazing internal reflection spectroscopy (1994) (9)
Layer selective laser ablation for local contacts to thin emitters (2011) (9)
IMPACT OF LATERAL VARIATIONS ON THE SOLAR CELL EFFICIENCY (2010) (8)
Increased Front Surface Recombination by Rear-Side Laser Processing on Thin Silicon Solar Cells (2013) (8)
Crystalline silicon films by chemical vapor deposition on glass for thin film solar cells (1996) (8)
Contacting Interdigitated Back-Contact Solar Cells With Four Busbars for Precise Current–Voltage Measurements Under Standard Testing Conditions (2012) (8)
21.0%‐efficient co‐diffused screen printed n‐type silicon solar cell with rear‐side boron emitter (2016) (8)
A 22.3% Efficient p‐Type Back Junction Solar Cell with an Al‐Printed Front‐Side Grid and a Passivating n + ‐Type Polysilicon on Oxide Contact at the Rear Side (2020) (8)
A process sequence for silicon solar cells with local boron diffused back surface field (2006) (8)
Advances in Contactless Silicon Defect and Impurity Diagnostics Based on Lifetime Spectroscopy and Infrared Imaging (2007) (8)
III-V/Si Tandem Cells Utilizing Interdigitated Back Contact Si Cells and Varying Terminal Configurations (2017) (8)
Directional Heating and Cooling for Controlled Spalling (2015) (8)
Layer Transfer from Chemically Etched 150 mm Porous Si Substrates (2011) (8)
Thin-film solar cell and modules from the porous silicon processing using 6” Si-substrates (2006) (8)
Laser processing for back-contacted silicon solar cells (2006) (8)
Numerical simulation of innovative device structures for silicon thin-film solar cells (1996) (8)
Instrumentation-related uncertainty of reflectance and transmittance measurements with a two-channel spectrophotometer. (2017) (8)
High Efficient Fully Ion-Implanted, Co-Annealed and Laser-Structured Back Junction Back Contacted Solar Cells (2014) (7)
Printable liquid silicon for local doping of solar cells (2017) (7)
High efficiency back-contact back-junction thin-film monocrystalline silicon solar cells from the porous silicon process (2013) (7)
Porous germanium multilayers (2011) (7)
Laser transfer doping for contacting n‐type crystalline Si solar cells (2011) (7)
Development of highly-efficient GaInP/Si Tandem Solar Cells (2015) (7)
Thermally stable surface passivation by a-Si:H/SiN double layers for crystalline silicon solar cells (2008) (7)
Contribution of silicon substrates to the efficiencies of silicon thin layer solar cells (1997) (7)
How to Obtain Solderable Al/Ni:V/Ag Contacts☆ (2013) (7)
Structural analysis of textured silicon surfaces after ion implantation under tilted angle (2014) (7)
Towards 28 %-efficient Si single-junction solar cells with better passivating POLO junctions and photonic crystals (2022) (7)
Design considerations for thin-film silicon solar cells from the porous silicon (PSI) process (2002) (7)
Thin Crystalline Macroporous Silicon Solar Cells with Ion Implanted Emitter (2013) (7)
Increasing the photo-generated current in solar cells with passivating contacts by reducing the poly-Si deposition temperature (2018) (7)
Bow of Silicon Wafers After In-Line High-Rate Evaporation of Aluminum (2013) (6)
Reuse of Substrate Wafers for the Porous Silicon Layer Transfer (2016) (6)
Improved Understanding of Recombination at the Si/Al2O3 Interface (2010) (6)
Formation of defects at the amorphous silicon-crystalline silicon interface during annealing (2007) (6)
Dry processing of silicon solar cells in a large area microwave plasma reactor (2002) (6)
Contacting a single nanometer‐sized pinhole in the interfacial oxide of a poly‐silicon on oxide (POLO) solar cell junction (2021) (6)
Manifold use of growth substrate in the porous silicon-layer transfer-process (2005) (6)
Modelling c‐Si/SiNx interface recombination by surface damage (2010) (6)
Comparison of Free Energy Loss Analysis and Synergistic Efficiency Gain Analysis for PERC Solar Cells (2018) (6)
Lift-off of Porous Germanium Layers (2011) (6)
Fundamental consideration of junction formation strategies for phosphorus-doped emitters with J0e < 10 fA/cm2 (2017) (6)
Imaging Techniques for the Analysis of Silicon Wafers and Solar Cells (2008) (6)
Comprehensive model for interface recombination at a‐Si:H/c‐Si interfaces based on amphoteric defects (2010) (5)
Evaluation of localized vertical current formation in carrier selective passivation layers of silicon solar cells by conductive AFM (2019) (5)
Silicon carbide barrier layer on ceramic substrates for crystalline silicon thin-film modules with an integrated series connection (2003) (5)
A Simple Model Describing the Symmetric <formula formulatype="inline"><tex Notation="TeX">$I\hbox{--}V$</tex></formula> Characteristics of <formula formulatype="inline"><tex Notation="TeX">$\hbox{p}$</tex></formula> Polycrystalline Si/ <formula formulatype="inline"><tex Notation="TeX">$\hbox{n}$</te (2014) (5)
Dynamic Lifetime Imaging Based on Photoluminescence Measurements (2010) (5)
Multilayer etching for kerf-free solar cells from macroporous silicon (2013) (5)
Experimental Determination of the Uncertainty of the Absorption Coefficient of Crystalline Silicon (2015) (5)
Flip-Flop Cell Interconnection Enabled by an Extremely High Bifacial Factor of Screen-Printed Ion Implanted n-PERT Si Solar Cells (2016) (5)
Firing Stability of SiNy / SiNx Surface Passivation Stacks for Crystalline Silicon Solar Cells (2011) (5)
Aluminum Evaporation and Etching for the Front-Side Metallization of Solar Cells (2013) (5)
Two-level Metallization and Module Integration of Point-contacted Solar Cells☆ (2014) (5)
Infrared Investigation of Ultraviolet‐Light‐Induced Changes of Chemical Bonds in Silicon‐rich Plasma Silicon Nitride (1992) (5)
A comparison of models to optimize Partial Rear Contact solar cells (2013) (5)
Impact of Contacting Geometries When Measuring Fill Factors of Solar Cell Current–Voltage Characteristics (2017) (5)
Principle of Module-Level Processing Demonstrated at Single a-Si:H/c-Si Heterojunction Solar Cells (2014) (5)
Determination of the Emitter Saturation Current Density of Silicon Solar Cells Using Photoluminescence and Quantum Efficiency Analysis (2009) (5)
Optimizing the geometry of local aluminum-alloyed contacts to fully screen-printed silicon solar cells (2012) (5)
Dynamic photoluminescence lifetime imaging for injection- dependent lifetime measurements (2014) (5)
Transferring the Record p-type Si POLO-IBC Cell Technology Towards an Industrial Level (2019) (5)
Determining the Bulk Lifetime of Unpassivated Multicrystalline Silicon Wafers (2010) (5)
Firing stability of n-type poly-Si on oxide junctions formed by quartz tube annealing (2020) (5)
A Cross-Country Model for End-Use Specific Aggregated Household Load Profiles (2021) (5)
Thermomechanical Spalling of Epitaxially Grown Silicon from Porosified Substrates (2016) (4)
CRYSTALLINE SILICON THIN-FILM SOLAR CELLS FROM THE POROUS SILICON PROCESS APPLYING CONVECTION ASSISTED CHEMICAL VAPOR DEPOSITION (2008) (4)
Lifetime Analysis for Defect Characterization in Kerfless Epitaxial Silicon from the Porous Silicon Process (2016) (4)
Reducing UV induced degradation losses of solar modules with c-Si solar cells featuring dielectric passivation layers (2017) (4)
DAIDALOS – A Plugin Based Framework for Extendable Ray Tracing (2010) (4)
Gas Phase Etch Back: A New Selective Emitter Technology for High-Efficiency PERC Solar Cells (2013) (4)
Light Trapping and Surface Passivation of Micron-Scaled Macroporous Blind Holes (2016) (4)
Ion-implanted Poly-Si / c-Si Junctions as a Back-surface Field in Back-Junction Back-Contacted Solar Cells (2014) (4)
Influence of emitter profile characteristics on thermal stability and passiviation quality of a-Si/SiNX-passivated boron emitters (2010) (4)
From high‐efficiency n‐type solar cells to modules exceeding 20% efficiency with aluminum‐based cell interconnection (2013) (4)
9 ms carrier lifetime in kerfless epitaxial wafers by n-type POLO gettering (2018) (4)
Formation of locally aluminum-doped p-type silicon regions by in-line high-rate evaporation (2011) (4)
20%-efficient silicon solar cells with local contacts to the a-Si-passivated surfaces by means of annealing (COSIMA) (2005) (4)
Postproduction Coloring of Photovoltaic Modules With Imprinted Textiles (2021) (4)
Shadow-epitaxy for flexible crystalline thin-film silicon solar cell design (2000) (4)
N-Type Cz-Silicon Solar Cells with Screen-Printed Alluminum-Alloyed Rear Emitter (2010) (3)
Module interconnection of both sides-contacted silicon solar cells by screen-printing (2013) (3)
Ni:Si as Barrier Material for a Solderable PVD Metallization of Silicon Solar Cells☆ (2013) (3)
Process Characterisation of Picosecond Laser Ablation of SiO2 and SiNx Layers on Planar and Textured Surfaces (2008) (3)
Infrared capacity mapping of semiconductor junctions by lock-in thermography (2005) (3)
Simulation of Optimized Cell Interconnection for Perc Modules Exceeding 300 W (2014) (3)
Proceedings of the 2nd Workshop on Metallization for Crystalline Silicon Solar Cells : Status, trends and new directions (2010) (3)
Notice of Removal Junction resistivity of carrier selective polysilicon on oxide junctions and its impact on the solar cell performance (2017) (3)
Lambertian Light Trapping in Thin Macroporous Silicon Layers (2014) (3)
Analysis of Thermal Processes Driving Laser Welding of Aluminum Deposited on Glass Substrates for Module Interconnection of Silicon Solar Cells (2015) (3)
IMAGING AND ANALYSIS OF PRE-BREAKDOWN SITES IN MULTICRYSTALLINE SILICON SOLAR CELLS (2009) (3)
In-Line High-Rate Deposition of Aluminum Onto RISE Solar Cells by Electron Beam Technology (2011) (3)
Impact of Local Back-Surface-Field Thickness Variation on Performance of PERC Solar Cells (2021) (3)
Laser surface texturing for reducing reflection losses in multicristalline silicon solar cells (2007) (3)
Kerfless epitaxial silicon wafers with 7 ms carrier lifetimes and a wide lift-off process window (2018) (3)
Simultaneous Contacting and Interconnection of Passivated Emitter and Rear Solar Cells (2016) (3)
Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111) (2011) (3)
Two‐dimensional simulation of thin‐film silicon solar cells with innovative device structures (1999) (3)
Stable anodes for lithium ion batteries made of self-organized mesoporous silicon (2015) (3)
Back Cover: Thin macroporous silicon heterojunction solar cells (Phys. Status Solidi RRL 5/2012) (2012) (3)
Fully screen‐printed silicon solar cells with local Al‐p+ and n‐type POLO interdigitated back contacts with a VOC of 716 mV and an efficiency of 23% (2021) (3)
Determination of thermophysical properties of thin films for photovoltaic applications (2005) (3)
UV-stable surface passivation for crystalline silicon cells in solar modules with UV light transmitting encapsulation materials (2019) (3)
Microstructure of epitaxial layers deposited on silicon by ion assisted deposition (2001) (3)
Open Source Graphical User Interface in MATLAB for Two-Dimensional Simulations Solving the Fully Coupled Semiconductor Equations Using COMSOL (2010) (3)
Impact of contacting geometries on measured fill factors (2017) (3)
Failure Stress of Epitaxial Silicon Thin Films (2013) (3)
Macroporous silicon as an absorber for thin heterojunction solar cells (2012) (3)
Mesoporous GaAs double layers for layer transfer processes (2009) (3)
Point contact openings in surface passivated macroporous silicon layers (2012) (3)
Formation of mesoporous gallium arsenide for lift-off processes by electrochemical etching (2009) (2)
Formation of mesoporous germanium by electrochemical etching for lift-off processes (2009) (2)
Microwave reflections for carrier lifetime measurements: a comprehensive study on sensitivity and transient response (1994) (2)
Structural investigation of ion implantation of boron on random pyramid textured Si(100) for photovoltaic applications (2014) (2)
a-Si : H passivation scheme for monocrystalline silicon thin-film solar cells applying the PSI process (2005) (2)
Extended Cox & Strack analysis for the contact resistance of planar samples with carrier-selective junctions on both sides (2021) (2)
Sputtered Phosphorus‐Doped poly‐Si on Oxide Contacts for Screen‐Printed Si Solar Cells (2022) (2)
Quantum efficiency of thin film silicon solar cells on a highly doped substrate (1994) (2)
Laser Transfer Doping Using Amorphous Silicon (2011) (2)
A highly sensitive infrared spectroscopic method for buried thin low‐index films (1992) (2)
Series-connection of thin-film crystalline Si solar modules with a single metallisation step (2004) (2)
Contact resistance of local rear side contacts of screen-printed silicon PERC solar cells with efficiencies up to 19.4% (2011) (2)
Trap Density Imaging of Silicon Wafers using a Lock-In Infrared Camera Technique (2006) (2)
Determining the spectral responsivity of solar cells under standard test conditions (2019) (2)
Rear side dielectrics on interdigitating p+-(i)-n+ back-contact solar cells − hydrogenation vs. charge effects (2021) (2)
Impact of Ag Pads on the Series Resistance of PERC Solar Cells (2016) (2)
Silicon nanopowder as diffuse rear reflector for silicon solar cells (2017) (2)
On the chances and challenges of combining electron‐collecting nPOLO and hole‐collecting Al‐p+ contacts in highly efficient p‐type c‐Si solar cells (2022) (2)
Laser-welded Interconnection of Screen-printed Si Solar Cells (2014) (2)
Lifetimes in aluminum-doped silicon (2009) (2)
Editorial to the Proceedings of the 6th International Conference on Crystalline Silicon Photovoltaics (SiliconPV 2016) (2016) (1)
Contacting of Busbarless Solar Cells for Accurate I-V Measurements (2020) (1)
Ray Tracing of Complete Solar Cell Modules (2019) (1)
Demonstration of Feeding Vehicle‐Integrated Photovoltaic‐Converted Energy into the High‐Voltage On‐Board Network of Practical Light Commercial Vehicles for Range Extension (2021) (1)
Electron microscopy analysis of silicon islands and line structures formed on screen-printed Al-doped p+-surfaces (2008) (1)
Monolithically series-connected crystalline Si wafer cells for portable electronic devices (2005) (1)
Front side degradation of silicon solar cells by rear side laser processing (2012) (1)
Epitaxial Si films carried by thick polycrystalline Si as a drop-in replacement for conventional Si wafers (2014) (1)
Simultaneous gettering and emitter formation in multicrystalline-Si wafers by annealing phosphorus doped amorphous silicon compounds (2011) (1)
Limits for short-pulse laser processing of high efficiency crystalline silicon solar cells on thin wafers (2012) (1)
Combining Numerical Simulations, Machine Learning and Genetic Algorithms for Optimizing a POCl3 Diffusion Process (2021) (1)
POLO Back Junction: An Elegant Way to Implement Electron-Collecting Passivating Contacts in p-Type Industrial Silicon Solar Cells (2020) (1)
VIRE-EFFECT: VIA-RESISTANCE INDUCED RECOMBINATION ENHANCEMENT - THE ORIGIN OF REDUCED FILL FACTORS OF EMITTER WRAP THROUGH SOLAR CELLS (2009) (1)
Boosting PV Module Efficiency Beyond the Efficiency of Its Solar Cells – A Raytracing Study with Daidalos Now Available to the Scientific Community (2019) (1)
730 mV Bifacial Screen Printed a-Si:H/c-Si Heterojunction Solar Cells: Open-Circuit Voltage and Fill Factor Effect from a-Si:H Layer Thickness and Front Metellization (2013) (1)
Waffle Cells from the Porous SI (PSI) Process (2005) (1)
High efficiency n-type emitter-wrap-through silicon solar cells (2011) (1)
Erratum: Modelling c‐Si/SiNx interface recombination by surface damage (2010) (1)
Impact of firing and capping layers on long-term stability of doped poly-Si passivating contact layers (2022) (1)
Autodiffused Boron Emitter for N-Type Monocrystalline Si Thin-Film Solar Cells (2006) (1)
Laser microwelding of thin Al layers for interconnection of crystalline Si solar cells: analysis of process limits for ns and μs lasers (2014) (1)
p+/n+ polysilicon-on-oxide tunneling junctions as an interface of p-type PERC cells for tandem applications (2018) (1)
Fast Evaluation of Rooftop and Façade PV Potentials Using Backward Ray Tracing and Machine Learning (2021) (1)
Industrial n-Type Bifacial Co-Diffused Rear Emitter Solar Cells with Boron Silicate Glass as Diffusion Source and Passivation (2016) (1)
PERC+ solar cells with screen-printed dashed Ag front contacts (2019) (1)
Laser-induced modification of doped poly-Si surface for Si solar cells with structured passivated contacts (2020) (1)
Effect of SiO2 thicknesses in thermal-SiO2/PECVD-SiN stacks on surface passivation of n-type Cz silicon substrates (2010) (1)
High-efficiency crystalline silicon solar cells with ALD AI2O3 (2008) (1)
Modelling of Passivation and Resistance of n-Type poly-Si Layers by Trained Artificial Neural Networks (2019) (1)
Laser technology for solar cells and solar receivers (2007) (1)
Method and apparatus for spatially resolved characterization of electronic properties of semiconductor materials (1999) (0)
Laser Welding for Processing of Thin Crystalline Si Wafers (2015) (0)
Editorial to the proceedings of the 11th international conference on crystalline silicon photovoltaics (2020) (0)
Photovoltaic means and methods for their preparation (2003) (0)
A method of forming semiconductor thin film substrates and methods of making a semiconductor device, in particular a solar cell, with such a semiconductor multilayer substrate (2009) (0)
Cover Image (2021) (0)
EFFECT OF SiN DEPOSITION TEMPERATURE ON SURFACE PASSIVATION OF N-TYPE CZ SILICON SUBSTRATES USING THERMAL-SiO2/PECVD-SiN STACKS (2010) (0)
Detachment yield statistics for kerfless wafering using the porous silicon process (2019) (0)
担体選択的ポリSi/c-Si接合の動作原理:トンネリングが一部始終か? (2016) (0)
Light and elevated temperature induced degradation and recovery of gallium-doped Czochralski-silicon solar cells (2022) (0)
Towards Multi Millisecond Spatially Homogeneous Carrier Lifetimes from Epitaxial Silicon Wafers Grown on Porous Silicon (2017) (0)
OPTIMIZATION OF METALLIC NANOPARTICLES FOR PLASMON-ENHANCED SCATTERING AT THE REAR OF C-SI SOLAR CELLS (2012) (0)
Effect of different ALD Al2O3 oxidants on the surface passivation of black silicon (2016) (0)
HVPE-Grown GaAs//Si Tandem Device Performance (2018) (0)
SiliconPV : March 25-27 , 2013 , Hamelin , Germany Ni : Si as barrier material for a solderable PVD metallization of silicon solar cells (2013) (0)
A process for producing a selectively doped region in a semiconductor layer by using off-diffusion and corresponding semiconductor component (2006) (0)
Identifying the location of recombination from voltage-dependent quantum efficiency measurements (2017) (0)
Erratum to “Interconnection of busbar‐free back contacted solar cells by laser welding” Progress in Photovoltaics: Research and Applications 2015; 23:1057–1065 (2015) (0)
Bulk Lifetime Enhancement by Firing Steps in Back Contacted Multicrystalline Solar Cells (2010) (0)
Silver-free solar cell interconnection by laser spot welding of thin aluminum layers: analysis of process limits for ns- and μs-lasers (2014) (0)
Manufacturing Large Area Monocrystalline Silicon Thin-Film Solar Cells by applying the PSI-Process (2005) (0)
Firing-Stable PECVD SiOxNy/n-Poly-Si Passivating Contacts for High-Efficiency Silicon Solar Cells (2021) (0)
Design of Large Poly‐Si on Oxide Interdigitated Back Contact (POLO IBC) Silicon Solar Cells with Local Al–p+ Contacts in the Constraints of Measurement and Module Integration (2022) (0)
Application of Amorphous Silicon Buffer Layers to Interdigitated Back Contacted Silicon Heterojunction Solar Cells (2011) (0)
Dynamic ILM – An Approach to Infrared-Camera Based Dynamical Lifetime Imaging (2009) (0)
Formation of phosphorus emitters in crystalline silicon thin-film solar cells by the novel autodiffusion process (2006) (0)
SILICON CARBIDE BARRIER LAYER ON CERAMIC SUBSTRATES FOR CONNECTION CRYSTALLINE SILICON THIN-FILM MODULES WITH AN INTEGRATED SERIES (2003) (0)
by in-line high-rate evaporation (2011) (0)
Simulation-based roadmap for the integration of poly-silicon on oxide contacts into screen-printed crystalline silicon solar cells (2021) (0)
Proceedings of the 11th biennial conference on on Insulating films on semiconductors (1999) (0)
Proceedings of the 3rd international conference on crystalline silicon photovoltaics (SiliconPV 2013) (2014) (0)
Impact of pico-second laser pulses on buried thermally reorganized porous layers (2014) (0)
Semiconductor element with a passivated surface and method for its preparation (1994) (0)
PECVD Shadow Mask Deposition of Amorphous Silicon– a Shortcut to Local Passivating Contacts (2020) (0)
Impact of dielectric capping layer thickness on the contact formation between n+-type passivating contacts and screen-printed fire-through silver pastes (2022) (0)
REFLECTS – a European CRAFT project for the development of a bifacial silicon solar cell module (2007) (0)
Improved Calculation of the Power Gain of Vertical PV Modules due to Ground Reflection Using the Ground View Factor (2022) (0)
A method of electrically connecting a plurality of solar cells and photovoltaic module (2011) (0)
FACE PASSlVATlON BY CORONA-CHARGED OXIDES ONDUCTOR SURFACE CHARACTERlZATlOlN (1994) (0)
Increased yield of PERC compared to Al-BSF cells due to inherently lower module operating temperatures (2017) (0)
Modelling the annealing of poly-Si/SiOx/c-Si junctions (2022) (0)
High-efficiency cells from layer transfer: A first step towards Si thin-film/wafer hybrid technologies (2011) (0)
LITHOGRAPHY-FREE FORMATION OF ORDERED MACROPOROUS SILICON (2014) (0)
Technological Approaches to Thin‐Film Cells (2005) (0)
Call for papers: Special issue on characterisation of high efficiency silicon solar cells (2009) (0)
A method of growing a crystalline structure (1998) (0)
Monolithic Perovskite/Silicon Tandem Solar Cells on p-type POLO/PERC Silicon Bottom Cells (2022) (0)
20.2% Module efficiency on large area with passivated emitter and rear solar cells (2017) (0)
Empirical model predicting the layer thickness and porosity of p-type mesoporous silicon (2017) (0)
Analysis of RISE-IBC Solar Cells (2013) (0)
Thermal processes driving laser-welding for module interconnection (2015) (0)
A process for Rekombinationslebensdauermessung and apparatus for carrying out the method (1994) (0)
Solar cell contact structure with low recombination losses and manufacturing processes for such solar cells (2009) (0)
replacement for conventional Si wafers (2014) (0)
Separating the two polarities of the POLO contacts of an 26.1%-efficient IBC solar cell (2020) (0)
Customization of Photovoltaic Modules' Appearance by Colored Textiles (COTEX) (2020) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Rolf Dr. Brendel?

Rolf Dr. Brendel is affiliated with the following schools:

Leibniz University Hannover