Sheldon Lee Semiatin

Sheldon Lee Semiatin's AcademicInfluence.com Rankings

Engineering

#3631

World Rank

#4737

Historical Rank

Mechanical Engineering

#242

World Rank

#277

Historical Rank

engineering Degrees

Download Badge

Engineering

Why Is Sheldon Lee Semiatin Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Sheldon Lee Semiatin's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys (2000) (736)
Thermomechanical processing of beta titanium alloys—an overview (1998) (643)
The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure (2001) (389)
Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure (1999) (388)
A comparative study of the mechanical properties of high-strength -titanium alloys (2008) (324)
The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V (2000) (320)
Microstructure and texture evolution during solidification processing of Ti–6Al–4V (2003) (319)
Spheroidization of the lamellar microstructure in Ti–6Al–4V alloy during warm deformation and annealing (2011) (314)
Strain hardening due to deformation twinning in α-titanium : Constitutive relations and crystal-plasticity modeling (2005) (301)
Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium (2005) (291)
Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V (2003) (271)
Microstructure and properties of a refractory high-entropy alloy after cold working (2015) (269)
The laser additive manufacture of Ti-6Al-4V (2001) (265)
The adiabatic correction factor for deformation heating during the uniaxial compression test (2001) (257)
Formability and workability of metals : plastic instability and flow localization (1984) (245)
The origins of heterogeneous deformation during primary hot working of Ti–6Al–4V (2002) (228)
Strain hardening due to deformation twinning in α-titanium: Mechanisms (2006) (217)
Mechanisms of globularization of Ti-6Al-4V during static heat treatment (2003) (214)
Microstructure development during equal-channel angular pressing of titanium (2003) (214)
Hot workability of titanium and titanium aluminide alloys—an overview (1998) (214)
Elements of Induction Heating: Design Control and Applications (1988) (212)
Aging response of coarse- and fine-grained β titanium alloys (2005) (211)
The effect of material properties and tooling design on deformation and fracture during equal channel angular extrusion (2000) (211)
Magnetic and vibrational properties of high-entropy alloys (2011) (209)
Production of submicrocrystalline structure in large-scale Ti–6Al–4V billet by warm severe deformation processing (2004) (198)
Microstructure evolution during warm working of Ti–6Al–4V with a colony-α microstructure (2009) (196)
Absence of long-range chemical ordering in equimolar FeCoCrNi (2012) (176)
Effect of initial microstructure on plastic flow and dynamic globularization during hot working of Ti-6Al-4V (1999) (166)
Formation of nanostructures in commercial-purity titanium via cryorolling (2013) (156)
The thermomechanical processing of alpha/beta titanium alloys (1997) (152)
Thermomechanical processing of alpha titanium alloys : an overview (1999) (146)
Deformation and unstable flow in hot forging of Ti-6Ai-2Sn-4Zr-2Mo-0.1Si (1981) (144)
Mechanical Properties of Laser-Deposited Ti-6Al-4V (2001) (138)
Modeling microstructural development during the forging of Waspaloy (1995) (134)
Precipitation and recrystallization behavior of beta titanium alloys during continuous heat treatment (2003) (131)
Microstructure Evolution and Mechanical Behavior of Ultrafine Ti-6Al-4V During Low Temperature Superplastic Deformation (Postprint) (2016) (125)
The kinetics of static globularization of Ti-6Al-4V (2002) (125)
Self-consistent modeling of the flow behavior of wrought alpha/beta titanium alloys under isothermal and nonisothermal hot-working conditions (2002) (120)
Microstructural Response of Pure Copper to Cryogenic Rolling (PREPRINT) (2010) (119)
Effect of texture and slip mode on the anisotropy of plastic flow and flow softening during hot working of Ti-6Al-4V (2001) (118)
Coarsening behavior of an alpha-beta titanium alloy (2004) (118)
Flow softening during hot working of Ti-6Al-4V with a lamellar colony microstructure (1999) (115)
Formability of sandwich sheet materials in plane strain compression and rolling (1979) (113)
Effect of Cold Deformation and Annealing on the Microstructure and Tensile Properties of a HfNbTaTiZr Refractory High Entropy Alloy (2018) (102)
Deformation of sandwich sheet materials in uniaxial tension (1979) (99)
Thermal Conductivity of Plasma-Sprayed Monolithic and Multilayer Coatings of Alumina and Yttria-Stabilized Zirconia (2004) (98)
MEASUREMENT AND ANALYSIS OF HEAT-TRANSFER AND FRICTION DURING HOT-FORGING (1990) (96)
Low-temperature superplasticity of ultra-fine-grained Ti-6Al-4V processed by equal-channel angular pressing (2006) (93)
Determination of the Interface Heat Transfer Coefficient for Non-Isothermal Bulk-Forming Processes (1987) (92)
An automated method to determine the orientation of the high-temperature beta phase from measured EBSD data for the low-temperature alpha-phase in Ti–6Al–4V (2003) (90)
Constitutive analysis of the high-temperature deformation of Ti-6Al-4V with a transformed microstructure (2003) (89)
An analysis of the isothermal hot compression test (1992) (88)
Deformation and recrystallization behavior during hot working of a coarse-grain, nickel-base superalloy ingot material (2004) (87)
Evolution of grain and subgrain structure during cold rolling of commercial-purity titanium (2011) (86)
Thermomagnetic analysis of FeCoCrxNi alloys: Magnetic entropy of high-entropy alloys (2013) (84)
Prediction of the kinetics of static globularization of Ti-6Al-4V (2005) (83)
Deformation behavior of beta-titanium alloys (2003) (83)
Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb (2017) (83)
Microstructure, texture, and thermal conductivity of single-layer and multilayer thermal barrier coatings of Y2O3-Stabilized ZrO2 and Al2O3 made by physical vapor deposition (2004) (81)
The occurrence of shear bands in isothermal, hot forging (1982) (79)
Dynamic-coarsening behavior of an α/β titanium alloy (2006) (79)
PLASTIC INSTABILITY AND FLOW LOCALIZATION IN SHEAR AT HIGH RATES OF DEFORMATION (1984) (79)
An Overview of the Thermomechanical Processing of α/β Titanium Alloys: Current Status and Future Research Opportunities (2020) (75)
Alpha/Beta Heat Treatment of a Titanium Alloy with a Nonuniform Microstructure (2007) (74)
Shear localization during metal cutting (1983) (67)
Workability of a gamma titanium aluminide alloy during equal channel angular extrusion (1995) (66)
Processing-microstructure relationships for Ti-6Al-2Sn-4Zr-2Mo-0.1Si (1983) (65)
Grain growth and texture evolution in Ti–6Al–4V during beta annealing under continuous heating conditions (2002) (64)
3D Monte-Carlo simulation of texture-controlled grain growth (2003) (63)
Fundamentals of modeling for metals processing (2009) (62)
Deformation heating and its effect on grain size evolution during equal channel angular extrusion (2001) (62)
A 3-D Monte-Carlo (Potts) model for recrystallization and grain growth in polycrystalline materials (2006) (61)
Microstructure, texture, and mechanical properties of electron-beam melted Ti–6Al–4V (2003) (61)
Influence on texture on beta grain growth during continuous annealing of Ti–6Al–4V (2001) (61)
Monte Carlo modeling of microstructure evolution during the static recrystallization of cold-rolled, commercial-purity titanium (2006) (60)
Hot working of Ti-6Al-4V via equal channel angular extrusion (1999) (60)
Variant Selection During Cooling after Beta Annealing of Ti-6Al-4V Ingot Material (2012) (60)
Mechanisms and Kinetics of Static Spheroidization of Hot-Worked Ti-6Al-2Sn-4Zr-2Mo-0.1Si with a Lamellar Microstructure (2012) (59)
Cavitation during hot tension testing of Ti–6Al–4V (1998) (59)
ANISOTROPY OF THE HOT PLASTIC DEFORMATION OF Ti-6Al-4V SINGLE-COLONY SAMPLES (PREPRINT) (2009) (57)
Short-time beta grain growth kinetics for a conventional titanium alloy (1996) (55)
Revealing the impact of catalyst phase transition on carbon nanotube growth by in situ Raman spectroscopy. (2013) (55)
Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure (2006) (55)
Low-Temperature Coarsening and Plastic Flow Behavior of an Alpha/Beta Titanium Billet Material with an Ultrafine Microstructure (2008) (54)
Induction Heat Treatment of Steel (1986) (54)
Effect of hydrostatic pressure (1992) (53)
The equal channel angular extrusion process for materials processing (1996) (53)
Cavitation and failure during hot forging of Ti-6Al-4V (1999) (52)
Plastic Flow and Microstructure Evolution during Thermomechanical Processing of a PM Nickel-Base Superalloy (2013) (51)
Diffusion models for evaporation losses during electron-beam melting of alpha/beta-titanium alloys (2004) (51)
Plastic flow, microstructure evolution, and defect formation during primary hot working of titanium and titanium aluminide alloys with lamellar colony microstructures (1999) (50)
Metalworking : bulk forming (2005) (50)
Microstructure evolution during warm working of Ti–5Al–5Mo–5V–1Cr–1Fe at 600 and 800 °C (2013) (49)
Analysis of the homogenization of a nickel-base superalloy (2004) (48)
Influence of deformation on the Burgers orientation relationship between the α and β phases in Ti–5Al–5Mo–5V–1Cr–1Fe (2015) (48)
Coil design and fabrication: basic design and modifications (1988) (48)
Evolution of microstructure, macrotexture and microtexture during hot rolling of Ti-6A1-4V (1998) (47)
Equal channel angular extrusion of difficult-to-work alloys (2000) (47)
X-ray line-broadening analysis of deformation mechanisms during rolling of commercial-purity titanium (2004) (47)
An Investigation of High-Temperature Precipitation in Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloys (2015) (46)
An EBSD investigation of ultrafine-grain titanium for biomedical applications (2015) (46)
Diffusion coefficients for modeling the heat treatment of Ti-6Al-4V (2004) (46)
The decomposition of alpha phase during continuous cooling and isothermal transformation in gamma titanium aluminide (1991) (45)
Plastic flow phenomenology of 304L stainless steel (1983) (44)
Low-temperature superplasticity and coarsening behavior of Ti–6Al–2Sn–4Zr–2Mo–0.1Si (2010) (44)
Effect of microstructure on oxygen rich layer evolution and its impact on fatigue life during high-temperature application of α/β titanium (2016) (44)
Microstructure evolution and strengthening mechanisms in commercial-purity titanium subjected to equal-channel angular pressing (2017) (43)
Constitutive analysis of the high-temperature deformation mechanisms of Ti-6Al-4V and Ti-6.85Al-1.6V alloys (2005) (42)
Microstructure development during conventional and isothermal hot forging of a near-gamma titanium aluminide (1994) (42)
A coupled EBSD/EDS method to determine the primary- and secondary-alpha textures in titanium alloys with duplex microstructures (2008) (42)
Microstructure Evolution during Supersolvus Heat Treatment of a Powder Metallurgy Nickel-Base Superalloy (2012) (41)
Burgers vector population, dislocation types and dislocation densities in single grains extracted from a polycrystalline commercial-purity Ti specimen by X-ray line-profile analysis (2010) (40)
EBSD Analysis of Grain-Refinement Mechanisms Operating During Equal-Channel Angular Pressing of Commercial-Purity Titanium (2019) (40)
On the room-temperature annealing of cryogenically rolled copper (2011) (40)
The use of X-ray diffraction to determine slip and twinning activity in commercial-purity (CP) titanium (2008) (39)
A Self-Consistent Approach for Modeling the Flow Behavior of the Alpha and Beta Phases in Ti-6Al-4V (2011) (39)
Mathematical modeling of aluminum evaporation during electron-beam cold-hearth melting of Ti-6Al-4V ingots (2003) (39)
Effect of texture changes on flow softening during hot working of Ti-6Al-4V (2001) (38)
The Effect of Forging Variables on the Supersolvus Heat-Treatment Response of Powder-Metallurgy Nickel-Base Superalloys (2014) (38)
Evaluation of evaporation losses during electron-beam melting of Ti-Al-V alloys (2003) (38)
Flow softening and microstructure evolution during hot working of wrought near-gamma titanium aluminides (1992) (37)
Plastic Flow and Microstructure Evolution during Low-Temperature Superplasticity of Ultrafine Ti-6Al-4V Sheet Material (2010) (36)
Plastic-flow behavior and microstructural development in a cast alpha-two titanium aluminide (1992) (36)
Determination of the beta-approach curve and beta-transus temperature for titanium alloys using sensitivity analysis of a trained neural network (2006) (36)
Plastic flow and microstructure evolution during thermomechanical processing of laser-deposited Ti-6Al-4V preforms (2001) (35)
An experimental and theoretical investigation of the effect of local colony orientations and misorientation on cavitation during hot working of Ti-6Al-4V (2005) (35)
Effect of crystallographic texture on the isothermal beta grain-growth kinetics of Ti-6Al-4V (2002) (35)
High-temperature deformation and grain-boundary characteristics of titanium alloys with an equiaxed microstructure (2008) (35)
Inertia Friction Welding of Dissimilar Superalloys Mar-M247 and LSHR (2014) (34)
Metalworking : sheet forming (2006) (34)
Microstructure instability in cryogenically deformed copper (2010) (33)
Effect of Process Variables on Transformation-Texture Development in Ti-6Al-4V Sheet Following Beta Heat Treatment (2013) (33)
Plastic-flow and microstructure evolution during hot deformation of a gamma titanium aluminide alloy (1997) (33)
Dynamic transformation of Ti–6Al–4V during torsion in the two-phase region (2018) (33)
Texture evolution in vacuum arc remelted ingots of Ti-6Al-4V (2003) (32)
Forming limits of sandwich sheet materials (1979) (32)
Characterization of Microstructure, Texture, and Microtexture in Near-Alpha Titanium Mill Products (2013) (31)
Modeling of Microstructure Evolution During the Thermomechanical Processing of Titanium Alloys (Preprint) (2008) (31)
Dynamic transformation during the high temperature deformation of two-phase titanium alloys (2019) (31)
Phase transformation behavior of gamma titanium aluminide alloys during supertransus heat treatment (1998) (30)
Segregation and homogenization of a near-gamma titanium aluminide (1992) (30)
Deformation behavior of Waspaloy at hot-working temperatures (2004) (30)
Deformation and microstructure development during hot-pack rolling of a near-gamma titanium aluminide alloy (1995) (30)
Effect of strain reversal on the dynamic spheroidization of Ti-6Al-4V during hot deformation (2004) (29)
Early Stages of Microstructure and Texture Evolution during Beta Annealing of Ti-6Al-4V (2018) (29)
Grain-structure development in heavily cold-rolled alpha-titanium (2014) (29)
Initiation and Early Stages of Cavity Growth during Superplastic and Hot Deformation (1999) (29)
Modeling of the consolidation of continuous- fiber metal matrix composites via foil- fiber- foil techniques (1993) (29)
Anisotropic plasticity and cavity growth during upset forging of Ti-6Al-4V (2005) (29)
Tailoring of microstructure and mechanical properties of Ti―6Al―4V with local rapid (induction) heat treatment (2011) (29)
Formation of a submicrocrystalline structure in a two-phase titanium alloy without severe plastic deformation (2013) (29)
Processing and properties of ultrafine-grain aluminum alloy 5005 sheet (2007) (28)
Microstructure modeling and prediction during thermomechanical processing (2002) (28)
Plastic flow and fracture behavior of an Al-Ti-Cu nanocomposite (2001) (28)
Hot rolling of gamma titanium aluminide foil (2010) (28)
Grain growth in a conventional titanium alloy during rapid, continuous heat treatment (1994) (27)
Effect of the lamellar grain size on plastic flow behavior and microstructure evolution during hot working of a gamma titanium aluminide alloy (2002) (27)
Determination of interface heat-transfer coefficients for permanent-mold casting of Ti-6Al-4V (2001) (26)
Recrystallization and grain-growth behavior of a nickel-base superalloy during multi-hit deformation (2007) (26)
Nanocrystalline Hf and Ta containing FeCo based alloys for high frequency applications (2011) (26)
Modeling the evolution of microtextured regions during α/β processing using the crystal plasticity finite element method (2018) (26)
An analysis of flow localization during torsion testing (1985) (26)
Opposing and Driving Forces Associated with the Dynamic Transformation of Ti-6Al-4V (2018) (26)
Microstructure and mechanical properties of commercial-purity titanium after rapid (induction) heat treatment (2010) (26)
An analysis of the effect of cavity nucleation rate and cavity coalescence on the tensile behavior of superplastic materials (2000) (26)
Microstructure development and segment formation during ECA pressing of Ti–6Al–4V alloy (2004) (25)
Temperature transients during hot pack rolling of high temperature alloys (1991) (25)
A simplified numerical analysis of the sheet tensile test (1985) (25)
The occurrence of shear bands in nonisothermal, hot forging of Ti-6AI-2Sn-4Zr-2Mo-0.1Si (1983) (25)
Grain structure evolution during cryogenic rolling of alpha brass (2015) (25)
Effect of deformation heating and strain rate sensitivity on flow localization during the torsion testing of 6061 aluminum (1986) (24)
An analysis of the effect of continuous nucleation and coalescence on cavitation during hot tension testing (2000) (24)
A comparison of continuous SPD processes for improving the mechanical properties of aluminum alloy 6111 (2009) (24)
Validation of an automated EBSD method to deduce the β-phase texture in Ti–6Al–4V with a colony-α microstructure (2004) (24)
Anisotropy of plastic flow and microstructure evolution during hot working of laser-deposited Ti-6Al-4V (2001) (24)
Influence of temperature transients on the hot workability of a two-phase gamma titanium aluminide alloy (1996) (24)
Modeling of Texture Evolution during Hot Forging of Alpha/Beta Titanium Alloys (2007) (24)
An EBSD investigation of cryogenically-rolled Cu-30%Zn brass (2015) (24)
Homogenization of a nickel-base superalloy ingot material (2006) (24)
The Occurrence of Shear Bands in Metalworking (1983) (23)
Workflow for integrating mesoscale heterogeneities in materials structure with process simulation of titanium alloys (2014) (23)
Computer Simulation of Microstructure Evolution during Hot Forging of Waspaloy and Nickel Alloy 718 (2001) (23)
Effect of Process Variables on the Inertia Friction Welding of Superalloys LSHR and Mar-M247 (2016) (23)
Design of metal-matrix composite consolidation practices based on the foil/fiber/foil approach (1995) (22)
Formation of Grain Boundary Misorientation Spectrum in Alpha-Beta Titanium Alloys with Lamellar Structure under Warm and Hot Working (2004) (22)
Microstructural evolution during rolling of Ti22Al23Nb sheet (1995) (22)
Advances in the Science and Technology of Titanium Alloy Processing: Proceedings of an International Symposium Sponsored by the TMS Titanium and Shaping and Forming Held at the 125th TMS Annual Meeting and Exhibition in Anaheim, California, February 5-8, 1996 (1997) (22)
Implementation of exact grain-boundary geometry into a 3-D Monte-Carlo (Potts) model for microstructure evolution (2009) (21)
An analysis of cavity growth during open-die hot forging of Ti-6Al-4V (2005) (21)
An experimental and theoretical investigation of the influence of stress state on cavitation during hot working (2003) (21)
The Effect of Preheat Temperature and Inter-Pass Reheating on Microstructure and Texture Evolution During Hot Rolling of Ti-6Al-4V (Preprint) (2008) (20)
Modeling of cavity coalescence during tensile deformation (1999) (20)
Models for severe plastic deformation by equal-channel angular extrusion (2004) (20)
Metals process simulation (2010) (20)
Annealing behavior of cryogenically-rolled copper (2013) (20)
Evolution of Texture from a Single Crystal Ti-6Al-4V Substrate During Electron Beam Directed Energy Deposition (2017) (20)
A dataset for the development, verification, and validation of microstructure-sensitive process models for near-alpha titanium alloys (2016) (20)
Influence of heating and solidification conditions on the structure and surface quality of electron-beam melted Ti–6Al–4V ingots (2007) (20)
Understanding the failure of near-gamma titanium aluminides during rolling (1990) (20)
Microstructure evolution and mechanical behavior of ultra ﬁ ne Ti e 6Al e 4V during low-temperature superplastic deformation (2016) (20)
Plastic flow behavior of Ti48Al2.5Nb0.3Ta at hot-working temperatures (1990) (19)
Modeling of abnormal grain growth in textured materials (2004) (19)
Effect of flow softening on ring test calibration curves (1999) (19)
A technique to compensate for temperature history effects in the simulation of non-isothermal forging processes (1992) (19)
High temperature deformation behavior of a γ TiAl alloy determined using the load-relaxation test (2003) (19)
Effect of cryogenic temperature and change of strain path on grain refinement during rolling of Cu-30Zn brass (2015) (18)
Internal-variable analysis of high-temperature deformation behavior of Ti–6Al–4V: A comparative study of the strain-rate-jump and load-relaxation tests (2013) (18)
The Kinetics of Precipitate Dissolution in a Nickel-Base Superalloy (2017) (18)
Engineering the activity and lifetime of heterogeneous catalysts for carbon nanotube growth via substrate ion beam bombardment. (2014) (18)
Modeling the hot consolidation of ceramic and metal powders (1995) (18)
Microstructures and tensile properties of Ti–45.5Al–2Nb–2Cr rolled sheets (2001) (18)
Electronic structure and vibrational entropies of fcc Au-Fe alloys (2013) (18)
Low Temperature Superplasticity of Ti-6Al-4V Processed by Warm Multidirectional Forging (2012) (18)
Annealing behavior of severely-deformed titanium Grade 4 (2019) (18)
The Ring Test for P/M Materials (1998) (18)
Effect of the size distribution of alpha particles on microstructure evolution during heat treatment of an alpha/beta titanium alloy (2005) (17)
Overview and Outlook for Materials Processed by Severe Plastic Deformation (2000) (17)
A method to measure the texture of secondary alpha in bimodal titanium-alloy microstructures (2006) (17)
An analysis of the nonisothermal tensile test (1985) (17)
Effect of Strain-Path Reversal on Microstructure Evolution and Cavitation during Hot Torsion Testing of Ti-6Al-4V (2007) (17)
Using OIM to investigate the microstructural evolution of Ti-6Ai-4V (2002) (17)
Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V. (2021) (17)
Analysis of grain growth in a two-phase gamma titanium aluminide alloy (1997) (16)
Modeling large-strain deformation behavior and neighborhood effects during hot working of a coarse-grain nickel-base superalloy (2011) (16)
Failure modes during equal channel angular extrusion of aluminum alloy 2024 (2001) (16)
Influence of deformation defects on the development of strain gradients during the tensile deformation of polyethylene (1992) (16)
Hot-compression behavior and microstructure evolution of pre-alloyed powder compacts of a near-γ titanium aluminide alloy (1994) (16)
Measurement of homogenization kinetics for a near-gamma titanium aluminide (1992) (15)
Induction tempering of steel: Part I. Development of an effective tempering parameter (1985) (15)
Effect of Surfactant Molecular Weight on Particle Morphology of SmCo5 Prepared by High Energy Ball Milling (2012) (15)
An analysis of static recrystallization during continuous, rapid heat treatment (1996) (15)
Cavitation during hot-torsion testing of Ti-6Al-4V (2005) (14)
Particle-associated misorientation distribution in a nickel-base superalloy (2007) (14)
The Effect of Cooling Rate on High-Temperature Precipitation in a Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloy (2018) (14)
Influence of niobium solutes on the mechanical behavior of nickel during hot working (2013) (14)
The effect of stress triaxiality on tensile behavior of cavitating specimens (2001) (13)
Constitutive Modeling of Low-Temperature Superplastic Flow of Ultrafine Ti-6Al-4V Sheet Material (2010) (13)
The effect of shear bands on service properties of ti-6ai-2sn-4zr-2mo-0.1si forgings (1983) (13)
The Prediction of Plastic Properties of Polycrystalline Aggregates of BCC Metals Deforming by Pencil Glide (1979) (13)
X-Ray Line-Broadening Investigation of Deformation During Hot Rolling of Ti-6A1-4V with a Colony-Alpha Microstructure (PREPRINT) (2006) (13)
Simulation of the hot-tension test under cavitating conditions (1996) (12)
Influence of stress state on cavitation during hot working of Ti-6Al-4V (2004) (12)
High-temperature deformation and failure of an orthorhombic titanium aluminide sheet material (1996) (12)
Modeling of hot isostatic pressing and hot triaxial compaction of Ti–6Al–4V powder (1999) (12)
Optimization of VPSC Model Parameters for Two-Phase Titanium Alloys: Flow Stress Vs Orientation Distribution Function Metrics (2018) (12)
Investigation of flow stress and microstructure development in non-isothermal forging of Ti-6242 (1993) (12)
Annealing behavior of cryogenically-rolled Cu–30Zn brass (2015) (12)
Dissolution of the Alpha Phase in Ti-6Al-4V During Isothermal and Continuous Heat Treatment (2019) (11)
Site-Dependent Tension Properties of Inertia Friction-Welded Joints Made From Dissimilar Ni-based Superalloys (2015) (11)
Structural superplasticity of an Al alloy in low strain rate regime—An internal variable approach (2005) (11)
A Geometric Framework for Mesoscale Models of Recrystallization (2007) (11)
Homogenization of near-gamma titanium aluminides: Analysis of kinetics and process scaleup feasibility (1993) (11)
The Repair of Single Crystal Nickel Superalloy Turbine Blades Using Laser Engineered Net Shape (LENS) Technology (2003) (11)
Measurement and Interpretation of Flow Stress Data for the Simulation of Metal-Forming Processes (2010) (11)
Fabrication of dense thin sheets of γ-TiAl by hot isostatic pressing of tape-cast monotapes (2003) (11)
Effect of process parameters on process efficiency and inertia friction welding behavior of the superalloys LSHR and Mar-M247 (2017) (11)
Load-Signature analysis for pack rolling of near-gamma titanium aluminide alloys (1994) (10)
Numerical analysis of the hot tension test (1993) (10)
Alloying-Element Loss During High-Temperature Processing of a Nickel-Base Superalloy (2014) (10)
The microstructure-strength relationship in severely-deformed commercial-purity titanium (2017) (10)
Characterization of Plastic Flow Pertinent to the Evolution of Bulk Residual Stress in Powder-Metallurgy, Nickel-Base Superalloys (2015) (10)
A Simple Model for Conventional Hot Rolling of Sheet Materials (1994) (10)
A Transfer Function for Relating Mean 2D Cross-Section Measurements to Mean 3D Particle Sizes (2018) (10)
A comparison of the precipitation behavior in PM γ-γ′ nickel-base superalloys (2016) (10)
The Forging of Metals (1981) (10)
Grain growth during annealing of cryogenically-rolled Cu-30Zn brass (2016) (10)
Microstructural Characterization of Friction-Stir Processed Ti-6Al-4V (2020) (9)
The Radial Temperature Gradient in the Gleeble® Hot-Torsion Test and Its Effect on the Interpretation of Plastic-Flow Behavior (2017) (9)
Transient behaviour of torque and process efficiency during inertia friction welding (2018) (9)
Precipitation in powder-metallurgy, nickel-base superalloys: review of modeling approach and formulation of engineering methods to determine input data (2016) (9)
EBSD investigation of microstructure evolution during cryogenic rolling of type 321 metastable austenitic steel (2019) (9)
Effect of electric-current pulses on grain-structure evolution in cryogenically rolled copper (2014) (9)
Formation of Minor Phases in a Nickel-Based Disk Superalloy (2012) (9)
The influence of post-ECAP annealing on the properties of ultrafine-grained 5005 aluminum alloy sheet (2007) (9)
Validation of computer models for the consolidation of metal—matrix composites (1996) (9)
The effect of strain-path reversal on cavitation during hot torsion of Ti-6Al-4V (2006) (9)
EBSD Characterization of Cryogenically Rolled Type 321 Austenitic Stainless Steel (2018) (9)
The effect of density anisotropy on the yielding and flow behavior of partially consolidated powder compacts (1998) (9)
Transient Plastic Flow and Phase Dissolution During Hot Compression of α/β Titanium Alloys (2020) (9)
Failure behavior of 304l stainless steel in torsion (1983) (9)
Consolidation of Continuous Fiber, Intermetallic-Matrix Composites (1992) (8)
MICROPLASTICITY PREDICTIONS OF r-VALUES AND YIELD LOCI OF LOW CARBON SHEET STEELS DEFORMING BY PENCIL GLIDE (1979) (8)
Microstructure response of cryogenically-rolled Cu–30Zn brass to electric-current pulsing (2016) (8)
Metastable Co3C nanocrystalline powder produced via reactive ball milling: Synthesis and magnetic properties (2016) (8)
Intergranular fracture of gamma titanium aluminides under hot working conditions (1998) (8)
Workability Theory and Application in Bulk Forming Processes* (2007) (8)
Phonon densities of states of face-centered-cubic Ni-Fe alloys (2013) (8)
Segregation in multicomponent ingot metallurgy gamma titanium aluminides (1991) (8)
Role of Deformation Twinning in Cold Rolling and Recrystallization of Titanium (2005) (8)
Determination of Flow Stress Data for Practical Metal Forming Analysis (1981) (8)
Branch Elimination during Heat Treatment of Titanium Alloys with a Colony-Alpha Microstructure (2008) (8)
Efficiency of the Inertia Friction Welding Process and Its Dependence on Process Parameters (2017) (8)
A criterion for intergranular failure during hot working of a near-gamma titanium aluminide alloy (1997) (8)
EFFECT OF SOLID SOLUTION ADDITIVES ON THE DENSIFICATION AND CREEP OF GRANULAR CERAMICS (1997) (8)
A comparison of discrete element model predictions to observations of metal powder consolidation (1999) (7)
Modeling of Thermal Stresses and Thermal Cracking During Heating of Large Ingots (1996) (7)
Application of microhardness testing for the analysis of powder consolidation processes (1994) (7)
Effect of Preheating on the Inertia Friction Welding of the Dissimilar Superalloys Mar-M247 and LSHR (2016) (7)
A Comparison of the Inertia Friction Welding Behavior of Similar and Dissimilar Ni-Based Superalloys (2018) (7)
Investigation of Microstructure and Thermomechanical History in the Hammer Forging of an Incoloy 901 Disk (1993) (7)
Modeling and Simulation of Texture Evolution During the Thermomechanical Processing of Titanium Alloys (PREPRINT) (2008) (7)
Can Design for Nonisothermal Pancake Forging of Gamma Titanium Aluminide Alloys (1996) (7)
A Model of Discontinuous Dynamic Recrystallization and its Application for Nickel Alloys (2010) (7)
Effect of texture on the cold rolling behavior of an alpha-two titanium aluminide (1992) (7)
Mesoscale Modeling of the Recrystallization of Waspaloy and Application to the Simulation of the Ingot-Cogging Process (Preprint) (2006) (6)
A theoretical investigation of the effect of material properties and cavity architecture/shape on ductile failure during the hot tension test (1998) (6)
Effect of Stress and Strain Path on Cavity Closure during Hot Working of an Alpha/Beta Titanium Alloy (2008) (6)
The role of modeling in the development of advanced processes for metallic aerospace alloys (2004) (6)
An Investigation of the Development of Coarse Grains During β Annealing of Hot-Forged Ti-6Al-4V (2021) (6)
Mechanical Behaviour and Microstructure Evolution of Severely Deformed Two-Phase Titanium Alloys (2008) (6)
MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF THERMAL BARRIER COATINGS PROCESSED BY PLASMA SPRAY AND PHYSICAL VAPOR DEPOSITION TECHNIQUES (1996) (6)
In-Situ Determination of Precipitation Kinetics During Heat Treatment of Superalloy 718 (2020) (6)
The effect of stress state on cavity initiation during hot working of Ti-6Al-4V (2003) (5)
Coarsening Behavior and Plastic Flow of Ti-6Al-2Sn-4Zr-2Mo-0.1Si with an Ultrafine Microstructure (2016) (5)
An investigation of the effect of texture on the high-temperature flow behavior of an orthorhombic titanium aluminide alloy (1997) (5)
Failure during hot working of spray-formed Rene’ 88 (2003) (5)
High-Temperature Static Coarsening of Gamma-Prime Precipitates in NiAlCr-X Single Crystals (2019) (5)
A Crystal‐Plasticity Model for the Flow Behavior of Two‐Phase Alloy Systems (2004) (5)
A Fast-Acting Method for Simulating Precipitation During Heat Treatment of Superalloy 718 (2021) (5)
The grain-refinement mechanism during heavy cold-rolling of commercial-purity titanium (2021) (5)
A simple analysis for the design of the controlled-dwell extrusion process (1994) (5)
Formation of Submicrocrystalline Structure in Large‐Scale Ti‐6Al‐4V Billets during Warm Severe Plastic Deformation (2005) (5)
Precipitation Modeling of Multi-Component Nickel-Based Alloys (2016) (5)
Effect of Test Method on Stress-Relaxation Behavior of Alloy 718 (2019) (5)
Induction tempering of steel: Part II. Effect of process variables (1985) (5)
Advances in the Development of Processing‐Microstructure Relations for Titanium Alloys (2016) (5)
An Investigation of Tertiary γ′ Precipitation in a Powder-Metallurgy, γ-γ′ Nickel-Base Superalloy (2019) (5)
Modeling the effect of cavity shape on cavitation behavior during hot working (2003) (4)
Introduction to Bulk-Forming Processes (2005) (4)
Fiber fracture during processing of continuous fiber, metal-matrix composites using the foil/fiber/foil technique (1995) (4)
Introduction to Fundamentals of Modeling for Metals Processing (2009) (4)
The deformation-path dependence of fracture strain in 304L stainless steel (1985) (4)
An analysis of cavitation occurring in near-&gg titanium aluminide during superplastic deformation (2001) (4)
Effect of Cooling Rate on Microstructure Evolution and Plastic Flow of Ti-6Al-4V (2021) (4)
Microstructural evolution during the hot working of superalloys (1999) (4)
Rheological Behavior of Pure Binary Ni–Nb Model Alloys (2009) (4)
Plastic Flow During Hot Working of Ti-7Al (2020) (4)
Thermal Stress Development During Vacuum Arc Remelting and Permanent Mold Casting of Ingots (1998) (4)
An investigation of the effect of texture on the high-temperature flow behavior of an orthorhombic titanium aluminide alloy (1997) (4)
Effect of Deformation Heating on Microstructure Evolution During Hot Forging of Ti-6Al-4V (2021) (4)
Hysteresis loss analysis of soft magnetic materials under direct current bias conditions (2015) (4)
Ultrafine Grained Materials IV: Preface (2006) (3)
Modeling the consolidation behavior of an alpha-two titanium aluminide powder (1995) (3)
Coil design and fabrication : part 3 , fabrication principles (3)
Mechanisms of Abnormal Grain Growth in Friction-Stir-Welded Aluminum Alloy 6061-T6 (2022) (3)
Hot working of platinum group metal-modified Ni-base superalloys for thermal protection system applications (2010) (3)
Homogenization of Ingot Metallurgy Near-Gamma Titanium Aluminides (1990) (3)
The knoop-hardness yield locus of an orthorhombic titanium aluminide alloy (1998) (3)
Comparison of gamma-gamma Phase Coarsening Responses of Three Powder Metal Disk Superalloys (2016) (3)
A novel process for breakdown forging of coarse-grain intermetallic alloys (1993) (3)
Physical modeling of metalworking processes : proceedings of a symposium spondored by the TMS-AIME Shaping and Forming Committee and held at the TMS Annual Metting in Denver, Colorado, February 24-27, 1987 (1987) (3)
The Application of Differential Scanning Calorimetry to Investigate Precipitation Behavior in Nickel-Base Superalloys Under Continuous Cooling and Heating Conditions (2021) (3)
Progress in the Advanced Titanium Microstructure and Modeling Program (2016) (3)
Defect Occurrence and Modeling for the Thermomechanical Processing of Aerospace Alloys (2007) (3)
A Comparison of the Plastic-Flow Response of a Powder-Metallurgy Nickel-Base Superalloy Under Nominally-Isothermal and Transient-Heating Hot-Working Conditions (2017) (3)
Deformation and unstable flow in hot torsion of Ti-6Ai-2Sn-4Zr-2Mo-0.1Si (1981) (3)
Synthetic Building and Targeted Analysis of Life‐Limiting Microtextured Regions (2016) (3)
Low-Temperature Coarsening and Plastic Flow Behavior of an Alpha/Beta Titanium Billet Material with an Ultrafine Microstructure (2008) (3)
Modeling Grain Boundary Mobility during Dynamic Recrystallization of Metallic Alloys (2010) (3)
The High-Temperature Bauschinger Effect in Alloy 718 (2018) (3)
A Comparison of Deformation Textures and Mechanical Properties Predicted by Different Crystal Plasticity Codes (2008) (2)
A hybrid micromechanical-macroscopic model for the analysis of the tensile behavior of cavitating materials (2004) (2)
Monte-Carlo Modeling of Recrystallization Kinetics of Cold-Rolled Titanium (2010) (2)
Deformation Behavior of Ti-6Al-4V and Ti-6.85Al-1.6V Alloy with a Globular Microstructure (2005) (2)
Modeling of cavitation during hot working (2002) (2)
An analysis of the effect of normal plastic anisotropy on the tensile ductility of sheet tension specimens (1997) (2)
Effect of process parameter variability on HIP consolidation of continuous-fiber, metal-matrix composites made from foil/fiber/foil layups (1995) (2)
Characterizing and Modeling the Precursors to Coarse Grain Formation during Beta-Annealing of Ti-6Al-4V (2020) (2)
The Effect of β Stabilizers on the Structure and Energy of α/β Interfaces in Titanium Alloys (2021) (2)
The dependence of cavity-growth rate on stress triaxiality (2004) (2)
Non-linear Transfer Functions for Accurately Estimating 3D Particle Size, Distribution, and Expected Error from 2D Cross Sections of a Lognormal Distribution of Spherical Particles (2020) (2)
The Effect of Crystal Orientation and Boundary Misorientation on Tensile Cavitation during Hot Tension Deformation of Ti-6Al-4V (2013) (2)
Effect of material imperfections on flow localization in torsion (1987) (2)
Microstructure Evolution and Composition Control During the Processing of Thin-Gage Metallic Foil (2012) (2)
The unusual character of microstructure evolution during “abc” deformation of commercial-purity titanium (2022) (2)
Tensile Fracture Behavior of a Cast Gamma-Titanium Aluminide (1990) (2)
A simple analysis of the hot consolidation of metal-matrix composite panels from tapecast monotape layups (1996) (2)
NASA/ORNL/AFRL Project Work on EBM LSHR: Additive Manufacturing of High-Temperature Gamma-Prime Strengthened Ni-Based Superalloys (2016) (2)
Analysis of primary hot working of Ti-6Al-4V with orientation imaging (2001) (2)
Deformation and Fracture Characteristics of a Gamma Titanium Alumtnide at High Temperatures (1992) (2)
Cold Formability of Timetal® 21S Sheet Material (1997) (1)
AFRL-RX-WP-TP-2008-4349 IMPLEMENTATION OF EXACT GRAIN-BOUNDARY GEOMETRY INTO A 3 D MONTE-CARLO ( POTTS ) MODEL FOR MICROSTRUCTURE EVOLUTION ( PREPRINT ) (2008) (1)
Effect of strain path on microstructure evolution during severe plastic deformation of Al (2004) (1)
Fabrication of A CU-AL-NI-MN Shape Memory Alloy (1991) (1)
Laser Forming of Ti-6Al-4V: Research Overview 58 (2000) (1)
AFRL-RX-WP-TP-2008-4344 THE EFFECT OF PREHEAT TEMPERATURE AND INTER-PASS REHEATING ON MICROSTRUCTURE AND TEXTURE EVOLUTION DURING HOT ROLLING OF Ti-6 Al-4 V ( PREPRINT ) (2008) (1)
Modeling Machining Distortion of Aircraft‐Engine Disk Forgings (2004) (1)
Load Relaxation Behavior of Ultra-Fine Grained Ti-6Al-4V Alloy (2005) (1)
An experimental and theoretical investigation of the rapid consolidation of continuously reinforced, metal-matrix Composites (1996) (1)
Modeling of Texture Evolution during Hot Forging of Alpha/Beta Titanium Alloys (2008) (1)
Hot Deformation of Ti-6Al-4V Single-Colony Samples (Preprint) (2008) (1)
Energy Barriers and Driving Forces Associated with the Dynamic Transformation of Ti-6Al-4V (Preprint) (2017) (1)
The Constant-Stress, Constant-Heating-Rate Test: A Novel Method for Characterizing Transient Mechanical Behavior of Metallic Materials (2021) (1)
Feasibility of Using a Large Press (80,000 - 200,000 Ton) for Manufacturing Future Components on Army Systems (1983) (1)
Supersolvus Hot Workability and Dynamic Recrystallization in Wrought Co–Al–W-Base Alloys (2020) (1)
Deformation and Recrystallization during Thermomechanical Processing of a Nickel-Base Superalloy Ingot Material (2007) (1)
Constitutive Analysis for Superplasic Deformation Behavior of AZ31 Magnesium Alloy (2006) (1)
Effect of Texture on High Temperature Deformation Behaviors of Ti-6Al-4V Alloy (2007) (1)
Microstructure and Texture Evolution During Hot-Pack Rolling of Nickel-Base Superalloys to Thin Sheet and Foil (2011) (1)
Production of bulk nanocrystalline mill products by conventional metalforming methods (2019) (1)
Characterization of plastic and crystallographic anisotropy in an alpha-two titanium aluminide (1992) (1)
AFRL-RX-WP-TP-2008-4321 LOW-TEMPERATURE COARSENING AND PLASTIC-FLOW BEHAVIOR OF AN ALPHA / BETA TITANIUM BILLET MATERIAL WITH AN ULTRAFINE MICROSTRUCTURE ( PREPRINT ) (2008) (1)
Effect of material and process variability on HIP consolidation of continuous fiber, metal-matrix composites (1995) (1)
Severe Plastic Deformation Processes: Modeling and Workability (2000) (1)
Microstructure Uncertainty Propagation in Sheet Metal Forming Fe‐Simulations: Springback of Commercial‐Purity Titanium (2016) (1)
A Comparison of the Plastic Flow Response of a Powder Metallurgy Nickel Base Superalloy (Postprint) (2017) (0)
AFRL-RX-WP-TP-2008-4334 EFFECT OF STRESS AND STRAIN PATH ON CAVITY CLOSURE DURING HOT WORKING OF AN ALPHA / BETA TITANIUM ALLOY ( PREPRINT ) (2007) (0)
AFRL-ML-WP-TP-2006-453 X-RAY LINE-BROADENING INVESTIGATION OF DEFORMATION DURING HOT ROLLING OF Ti-6 A 1-4 V WITH A COLONY-ALPHA MICROSTRUCTURE ( PREPRINT ) (0)
A Heat Treatment to Produce a Coarse-α-Particle Size in Ti–6Al–4V (2022) (0)
A method of manufacturing a composite material zuendkerzenelektrode (1980) (0)
Microstructure Modeling and Prediction During Thermomechnical Processing: Foreword (2001) (0)
AFRL-RX-WP-TP-2008-4343 HOT DEFORMATION OF Ti-6 Al-4 V SINGLE-COLONY SAMPLES ( PREPRINT ) (2008) (0)
SOLID MATTER IMPLEMENTATION OF EXACT GRAIN-BOUNDARY GEOMETRY INTO A 3D MONTE-CARLO (POTTS) MODEL FOR MICROSTRUCTURE EVOLUTION (2009) (0)
High Temperature Deformation and Recrystallization Behavior of Ti-10V-2Fe-3Al (2001) (0)
Shear Bands in Forged Products. (1982) (0)
The Role of Microtexture on Fatigue Lifetime Variability and Crack Initiation Mechanisms (Preprint) (2011) (0)
Method for thermomechanical processing of near gamma titanium aluminide alloy wrought product (1995) (0)
Determination of pressure effects on the alpha - gamma phase transition and size of Fe in Nd-Fe-B spring exchange magnets (2015) (0)
Microstructure Instability in Cryogenically-Deformed Copper (Preprint) (2011) (0)
Mold wear during permanent-mold casting of Ti-6Al-4V (2001) (0)
AFRL-RX-WP-JA-2015-0162 AN EBSD INVESTIGATION OF CRYOGENICALLY-ROLLED CU-30 ° / oZN BRASS ( POSTPRINT ) (0)
Material-Behavior Models for the Thermomechanical Processing of Aerospace Alloys (2013) (0)
Hot Rolling of Gamma Titanium Aluminide Foil (PREPRINT) (2010) (0)
超微細粒Ti‐6Al‐2Sn‐4Zr‐2Mo‐0.1Si合金の粗大化挙動と塑性流動 (2016) (0)
Acquired immunodeficiency syndrome and human immunodeficiency virus infection in Nevada. (1991) (0)
The Effect of Strain-Path Reversal on Cavitation During Hot Torsion Of Ti-6A1-4V (Preprint) (2006) (0)
Ebsd Study of Laser-Shock-Peened Ti-6al-4v (2022) (0)
INHOMOGENEOUS AND ANISOTROPIC DEFORMATION BEHAVIOR AND STRAIN HARDENING OF ULTRAFINE-GRAINED ALUMINIUM BY ECAP (2009) (0)
Precipitation in Powder Metallurgy, Nickel Base Superalloys: Review of Modeling Approach and Formulation of Engineering (Postprint) (2016) (0)
Simulation of Rotational Welding Operations (2010) (0)
Introduction to Sheet-Forming Processes (2006) (0)
Grain-Structure Development in Heavily Cold-Rolled Alpha-Titanium (Postprint) (2014) (0)
AFRL-RX-WP-JA-2017-0191 MICROSTRUCTURE EVOLUTION AND MECHANICAL BEHAVIOR OF ULTRAFINE TIE 6 ALE 4 V DURING LOW-TEMPERATURE SUPERPLASTIC DEFORMATION ( POSTPRINT ) (2017) (0)
AFRL-RX-WP-TP-2009-4093 ANISOTROPY OF THE HOT PLASTIC DEFORMATION OF Ti-6 Al-4 V SINGLE-COLONY SAMPLES ( PREPRINT ) (2009) (0)
AFRL-RX-WP-TP-2011-4369 THE ROLE OF MICROTEXTURE OF FATIGUE LIFETIME VARIABILITY AND CRACK INITIATION MECHANISMS ( PREPRINT ) (2011) (0)
A hybrid micromechanical-macroscopic model for the analysis of the tensile behavior of cavitating materials (2004) (0)
Modeling Microstructural Waspaloy Development during the Forging of (0)
Analysis of Cavitation in a Near-γ Titanium Aluminide During High-Temperature/Superplastic Deformation (1999) (0)
Elasto-Plastic Analysis of Thermal Stress Development During VAR of Ingots (1999) (0)
Simulation of joining operations A: Rotational welding (2010) (0)
Engineering catalytic activity via ion beam bombardment of catalyst supports for vertically aligned carbon nanotube growth (2015) (0)
High Temperature Properties of Highly Electrical Resistive (Fe 0.81 Co 0.19 ) 84 Ta 9 B 7 Alloy Cast in Air (2016) (0)
Kornfeinungs- Optimisierungsverfahren and the mechanical properties for thermomechanical treatment of cast titanium aluminides below the gamma range (1995) (0)
Precipitation Modeling of Multi-Component Nickel-Based Alloys (2016) (0)
COMPARISON OF DEFORMATION TEXTURES AND MECHANICAL PROPERTIES PREDICTED BY DIFFERENT CRYSTAL PLASTICITY CODES ( PREPRINT ) (2008) (0)
Metals Processing/Processing Science. Work Order Directive (WUD) 49 (2002) (0)
Erratum to “Effect of process parameters on process efficiency and inertia friction welding behavior of the superalloys LSHR and Mar-M247” [J. Mater. Process. Tech. 250 (2017) 156–168] (2018) (0)
Slip Activity in Single Grains Extracted from Polycrystalline Specimen by X-Ray Line Broadening (Preprint) (2010) (0)
Effect of Hydrostatic Pressure on the Hot-Working Behavior of a Gamma Titanium Aluminide (1992) (0)
Microstructure evolution during warm working of Ti–5Al–5Mo–5V–1Cr–1Fe at 600 and 800 1C (0)
AFRL-RX-WP-JA-2015-0160 THE EFFECT OF FORGING VARIABLES ON THE SUPERSOLVUS HEAT-TREATMENT RESPONSE OF POWDER-METALLURGY NICKEL-BASE SUPERALLOYS ( POSTPRINT ) (2015) (0)
Effect of Thermomechanical Treatments on Solidification Inhomogeneity in Ingot Metallurgy Gammtait Anium Aluminides (1990) (0)
Fabrication of a CuAkNiMn shape memory alloy (1994) (0)
Preface to the Special Issue on Ultrafine Grained Materials (2010) (0)
Anisotropic $ {\alpha } $ -Fe/Nd–Fe–B Exchange-Spring Magnets Produced by High-Pressure Crystallization (2016) (0)
Correction to: Non-linear Transfer Functions for Accurately Estimating 3D Particle Size, Distribution, and Expected Error from 2D Cross Sections of a Lognormal Distribution of Spherical Particles (2021) (0)
COLLABORATIVE RESEARCH AND DEVELOPMENT (CR&D) Delivery Order 0043: Deformation and Texture Development During Hot Working of Titanium (2008) (0)
AFRL-RX-WP-JA-2015-0096 WORKFLOW FOR INTEGRATING MESOSCALE HETEROGENEITIES IN MATERIALS STRUCTURE WITH PROCESS SIMULATION OF TITANIUM ALLOYS ( POSTPRINT ) (2015) (0)
Collaborative Research and Development (CR&D). Delivery Order 0002: Deformation Mechanisms During Hot Working of Titanium (2005) (0)
AFRL-RX-WP-TM-2014-0011 ALLOYING-ELEMENT LOSS DURING HIGH-TEMPERATURE PROCESSING OF A NICKEL-BASE SUPERALLOY ( PREPRINT ) (2014) (0)
ALPHA/BETA HEAT TREATMENT OF A TITANIUM ALLOY WITH A NON- UNIFORM MICROSTRUCTURE (PREPRINT) (2006) (0)
Determination of the Misorientation Dependence of the Relative Grain-Boundary Energy of Commercial-Purity Nickel (Preprint) (2007) (0)
AFRL-RX-WP-TP-2010-4072 MEASUREMENT AND INTERPRETATION OF FLOW STRESS DATA FOR THE SIMULATION OF METAL-FORMING PROCESSES ( Preprint ) (2010) (0)
Erratum to “Influence of texture on beta grain growth during continuous annealing of Ti–6Al–4V” (2001) (0)
Hot Working of High-Purity Nickel-Niobium Alloys (2006) (0)
Location-Specific Microstructure and the Effect of Heat Treatment on Electron-Beam Melted Ni-Based Superalloy LSHR (2018) (0)
Konkova, T. and Mironov, S. and Korznikov, A. and Korznikova, G. and Myshlyaev, M. M. and Semiatin, S. L. (2015) Effect of cryogenic temperature and change of strain path on grain refinement during rolling (2018) (0)
Design of thermomechanical processes for the breakdown of alpha/beta titanium alloys with transformed beta microstructures (2016) (0)
MICROSTRUCTURE EVOLUTION DURING WARM WORKING OF Ti-6Al-4V WITH A COLONY ALPHA MICROSTRUCTURE (PREPRINT) (2008) (0)
Effect of Texture on High Temp Deformation Behavior of Ti-6Al-4V Alloy (2007) (0)
Deformation Mechanisms during Hot Working of Titanium (2004) (0)
AFRL-RX-WP-TP-2008-4304 EFFECT OF DEFORMATION AND PRESTRAIN MODE ON THE FLOW BEHAVIOR OF Ti-6 Al-4 V ( PREPRINT ) (2008) (0)
AFRL-RX-WP-TP-2008-4351 MICROSTRUCTURE EVOLUTION DURING WARM WORKING OF Ti-6 Al-4 V WITH A COLONY ALPHA MICROSTRUCTURE ( PREPRINT ) (2008) (0)
Modeling and Simulation of Cavitation During Hot Working (Preprint) (2009) (0)
Fabrication of Turbine Disk Materials by Additive Manufacturing (2014) (0)
High Temperature Deformation Behavior of Ti-6Al-4V Alloy with Widmanstäten Microstructure (2003) (0)
DETERMINATION OF HEAT TRANSFER THROUGH METAL FOILS AND CERAMIC FIBER MATS DURING COMPOSITE FABRICATION (1997) (0)
Real-Time Measurement of Process Efficiency during Inertia Friction Welding (Preprint) (2017) (0)
AFRL-RX-WP-TP-2012-0369 LOW TEMPERATURE SUPERPLASTICITY OF Ti-6 A 1-4 V PROCESSED BY WARM MULTIDIRECTIONAL FORGING ( PREPRINT ) (2012) (0)
AFRL-RX-WP-TP-2009-4117 A MODEL OF DISCONTIUOUS DYNAMIC RECRYSTALLIZATION AND ITS APPLICATION FOR NICKEL ALLOYS ( PREPRINT ) (2009) (0)
High Temperature Properties of Highly Electrical Resistive (Fe0.81Co0.19)84Ta9B7 Alloy Cast in Air (2016) (0)
Monte-Carlo Modeling of Recrystallization Kinetics of Cold-Rolled Titanium (PREPRINT) (2010) (0)
Deformation of Ti‐6Al‐4V via Equal Channel Angular Extrusion (2013) (0)
AFRL-RX-WP-TP-2009-4116 PLASTIC FLOW AND MICROSTRUCTURE EVOLUTION DURING LOW TEMPERATURE SUPERPLASTICITY OF ULTRAAFINE Ti-6 Al-4 V SHEET MATERIAL ( PREPRINT ) (2009) (0)
Two‐Phase Microstructure Generation in 3D Based on 2D Sections of a Nickel Alloy (2008) (0)
Modeling of thermal stress development during the vacuum arc remelting process (1995) (0)
Effect of Deformation and Prestrain Mode on the Flow Behavior of Ti-6Al-4V (2008) (0)
MODELING AND SIMULATION OF TEXTURE EVOLUTION DURING THE THERMOMECHANICAL PROCESSING OF TITANIUM (2008) (0)
The Radial Temperature Gradient in the Gleeble Hot-Torsion Test and Its Effect on the Interpretation (Postprint) (2017) (0)
AFRL-RX-WP-TP-2009-4216 CONSTITUTIVE MODELING OF LOW-TEMPERATURE SUPERPLASTIC FLOW OF ULTRAFINE Ti-6 AI-4 V SHEET MATERIAL ( PREPRINT ) (2009) (0)
AFRL-RX-WP-TP-2009-4118 MODELING GRAIN BOUNDARY MOBILITY DURING DYNAMIC RECRYSTALLIZATION OF METALLIC ALLOYS ( PREPRINT ) (2009) (0)
Authors’ reply (1997) (0)
AFRL-RX-WP-TP-2008-4338 A COUPLED EBSD / EDS METHOD TO DETERMINE THE PRIMARY – AND SECONDARY – ALPHA TEXTURES IN TITANIUM ALLOYS WITH DUPLEX MICROSTRUCTURES ( PREPRINT ) (2007) (0)

This paper list is powered by the following services:

Sheldon Lee Semiatin's Academic­Influence.com Rankings

Why Is Sheldon Lee Semiatin Influential?

Sheldon Lee Semiatin's Published Works

Published Works

Sheldon Lee Semiatin's AcademicInfluence.com Rankings