Shankar Mall
#157,924
Most Influential Person Now
Shankar Mall's AcademicInfluence.com Rankings
Shankar Mallengineering Degrees
Engineering
#6686
World Rank
#8022
Historical Rank
Materials Science
#389
World Rank
#393
Historical Rank
Download Badge
Engineering
Why Is Shankar Mall Influential?
(Suggest an Edit or Addition)Shankar Mall's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Introduction to carbon nanotube and nanofiber smart materials (2006) (405)
- A cohesive zone model for fatigue crack growth in quasibrittle materials (2001) (189)
- An evaluation of parameters for predicting fretting fatigue crack initiation (2000) (171)
- Modeling of a cracked metallic structure with bonded composite patch using the three layer technique (1996) (132)
- Fretting fatigue crack initiation mechanism in Ti–6Al–4V (2002) (129)
- Combined experimental–numerical investigation of fretting fatigue crack initiation (2001) (128)
- A shear stress-based parameter for fretting fatigue crack initiation (2001) (121)
- Contact resistance study of noble metals and alloy films using a scanning probe microscope test station (2007) (115)
- Effects of slip on fretting behavior: experiments and analyses (2004) (106)
- Criterion for Mixed Mode Fracture in Wood (1983) (102)
- INVESTIGATION OF A CRACKED THICK ALUMINUM PANEL REPAIRED WITH A BONDED COMPOSITE PATCH (1999) (100)
- Characterization of metal and metal alloy films as contact materials in MEMS switches (2006) (99)
- Modeling damage in unidirectional ceramic-matrix composites (1995) (95)
- Dugdale plastic zone size and CTOD equations for the compact specimen (1984) (95)
- Monotonic and fatigue loading behavior of quasi-isotropic graphite/epoxy laminate embedded with piezoelectric sensor (1998) (89)
- Effect of bond thickness on fracture and fatigue strength of adhesively bonded composite joints (1989) (89)
- Characterization of carbon nanotube/nanofiber-reinforced polymer composites using an instrumented indentation technique (2007) (88)
- Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique (1999) (84)
- Dynamic fracture toughness of Homalite-100 (1978) (83)
- Characterization of disbond effects on fatigue crack growth behavior in aluminum plate with bonded composite patch (1997) (80)
- Integrity of graphite/epoxy laminate embedded with piezoelectric sensor/actuator under monotonic and fatigue loads* (2002) (78)
- Fatigue crack growth analysis of stiffened cracked panel repaired with bonded composite patch (2006) (78)
- Stress ratio effect on cyclic debonding in adhesively bonded composite joints (1987) (77)
- Effects of frequency on fatigue behavior of CVI C/SiC at elevated temperature (2006) (77)
- A fracture mechanics approach for designing adhesively bonded joints (1985) (75)
- Frequency dependence of high-cycle fatigue behavior of CVI C/SiC at room temperature (2003) (74)
- Stress relaxation behavior of shot-peened Ti–6Al–4V under fretting fatigue at elevated temperature ☆ (2004) (72)
- Effects of independent pad displacement on fretting fatigue behavior of Ti–6Al–4V (2002) (72)
- Characterization of Mode I and Mixed-Mode Failure of Adhesive Bonds Between Composite Adherends (1986) (70)
- Loading Rate Effect on Interlaminar Fracture Toughness of a Thermoplastic Composite (1987) (69)
- Electromechanical fatigue behavior of graphite/epoxy laminate embedded with piezoelectric actuator (1999) (67)
- Influence of contact configuration on fretting fatigue behavior of Ti–6Al–4V under independent pad displacement condition (2002) (66)
- Effects of steam environment on high-temperature mechanical behavior of NextelTM720/alumina (N720/A) continuous fiber ceramic composite (2006) (64)
- Effects of Shot-Peening on Fretting-Fatigue Behavior of Ti-6Al-4V (2002) (62)
- Variational solution for a cracked mosaic model of woven fabric composites (2001) (62)
- Analyses of Contact Pressure and Stress Amplitude Effects on Fretting Fatigue Life (2001) (61)
- A finite element analysis of fretting fatigue crack growth behavior in Ti–6Al–4V (2008) (60)
- Investigation into cracked aluminum plate repaired with bonded composite patch (2007) (59)
- Micromechanical Relations for Fiber-Reinforced Composites Using the Free Transverse Shear Approach (1993) (59)
- Fretting fatigue crack initiation behavior using process volume approach and finite element analysis (2003) (57)
- Elasto-plastic finite element analysis of fretting stresses in pre-stressed strip in contact with cylindrical pad (2000) (56)
- Thermal effects on adhesively bonded composite repair of cracked aluminum panels (1997) (55)
- Cyclic debonding of adhesively bonded composites (1984) (53)
- Wear characterization of Ti–6Al–4V under fretting–reciprocating sliding conditions (2008) (53)
- Crack growth behavior of 7075-T6 under biaxial tension–tension fatigue (2013) (49)
- Fiber-Matrix Interphase Effects upon Transverse Behavior in Metal-Matrix Composites (1992) (49)
- Nonlinear analysis of bonded composite patch repair of cracked aluminum panels (1998) (49)
- Compressive Residual Stress into Titanium Alloy Using Cavitation Shotless Peening Method (2004) (49)
- High cycle fatigue behavior of Ti–6Al–4V with simulated foreign object damage (2001) (48)
- Effects of microstructure on fretting fatigue crack initiation behavior of Ti-6Al-4V (2004) (48)
- Characterization of Matrix Toughness Effect on Cyclic Delamination Growth in Graphite Fiber Composites (1989) (47)
- Effects of fretting fatigue on the residual stress of shot peened Ti–6Al–4V samples (2005) (46)
- Investigation into effects of re-shot-peening on fretting fatigue behavior of Ti–6Al–4V (2005) (46)
- Functionalization of carbon nanotube yarn by acid treatment (2014) (45)
- Fatigue crack growth analysis of adhesively repaired panel using perfectly and imperfectly composite patches (1997) (45)
- Modeling and validation of composite patch repair to cracked thick and thin metallic panels (2009) (44)
- Finite-Element Analysis of End-Notch Flexure Specimens (1986) (44)
- Micromechanical analysis for thermoviscoplastic behavior of unidirectional fibrous composites (1994) (43)
- Fully reversed electromechanical fatigue behavior of composite laminate with embedded piezoelectric actuator/sensor (2003) (40)
- Slip regime explanation of observed size effects in fretting (2004) (39)
- Investigation of variable amplitude loading on fretting fatigue behavior of Tiâ6Alâ4V (1999) (39)
- Effects of shot‐peening intensity on fretting fatigue crack‐initiation behaviour of Ti–6Al–4V (2005) (38)
- Creep behavior of NextelTM610/Monazite/Alumina composite at elevated temperatures ☆ (2006) (38)
- Effect of Adhesive Ductility on Cyclic Debond Mechanism in Composite-to-Composite Bonded Joints (1987) (37)
- Effects of microstructure on short crack growth behavior of Ti–6Al–2Sn–4Zr–2Mo–0.1Si alloy (2003) (37)
- Characterization of fatigue crack growth in aluminium panels with a bonded composite patch (1997) (36)
- Compression Strength Degradation of Nanocomposites after Lightning Strike (2009) (35)
- Dynamic-finite-element and dynamic-photoelastic analyses of two fracturing homalite-100 plates (1976) (35)
- Fretting fatigue behaviour of shot-peened Ti-6Al-4V at room and elevated temperatures (2003) (34)
- Thermal fatigue and hypothermal atomic oxygen exposure behavior of carbon nanotube wire (2013) (34)
- RESIDUAL STRENGTH OF UNSTIFFENED ALUMINUM PANELS WITH MULTIPLE SITE DAMAGE (1997) (33)
- Investigation into effects and interaction of various fretting fatigue variables under slip-controlled mode (2006) (33)
- Simultaneous Fatigue and Combustion Exposure of a SiC/SiC Ceramic Matrix Composite (2010) (32)
- Mechanical behavior of a notched oxide/oxide ceramic matrix composite in combustion environment: Experiments and simulations (2015) (32)
- The Development and use of a Digital Twin Model for Tire Touchdown Health Monitoring (2017) (32)
- Fretting behavior of Ti-6Al-4V under combined high cycle and low cycle fatigue loading (2001) (32)
- Evaluation of coatings on Ti-6Al-4V substrate under fretting fatigue (2005) (32)
- Corrosion fatigue crack growth behavior of 7075-T6 under biaxial tension–tension cyclic loading condition ☆ (2013) (31)
- Crack growth behavior under biaxial fatigue with phase difference (2015) (31)
- Titanium Matrix Composites (2020) (30)
- Fretting fatigue behavior of shot-peened Ti–6Al–4V under seawater environment (2006) (30)
- Investigation into three-dimensional effects of finite contact width on fretting fatigue (2005) (30)
- Investigation into wear of Ti–6Al–4V under reciprocating sliding conditions (2009) (30)
- Influence of interface ply orientation on fatigue damage of adhesively bonded composite joints (1986) (30)
- Biaxial tension–tension fatigue crack growth behavior of 2024-T3 under ambient air and salt water environments (2014) (30)
- The performance of graphite - epoxy composite with embedded optical fibers under compression (1996) (29)
- Characterization of debond growth mechanism in adhesively bonded composites under mode II static and fatigue loadings (1988) (29)
- Estimation of interfacial properties from hysteretic energy loss in unidirectional ceramic matrix composites (2000) (29)
- Effect of dissimilar mating materials and contact force on fretting fatigue behavior of Ti–6Al–4V☆ (2004) (28)
- Thermal Fatigue Behavior of a Unidirectional SCS6/Ti-15-3 Metal Matrix Composite (1991) (28)
- Effect of dissimilar metals on fretting fatigue behavior of Ti–6Al–4V (2006) (28)
- Tensile loading behavior of carbon nanotube wires (2012) (27)
- Tension―compression fatigue behavior of a H-VARTM manufactured unnotched and notched carbon/epoxy composite (2009) (27)
- A non-uniform friction distribution model for partial slip fretting contact (2007) (27)
- Effect of predamage from low cycle fatigue on high cycle fatigue strength of Ti-6Al-4V (2003) (24)
- Fretting fatigue behavior of Ti–6Al–4V with dissimilar mating materials☆ (2004) (24)
- Effects of process variables on fretting fatigue crack initiation in Ti-6A1-4V (2002) (24)
- Nanoindentation technique for characterizing cantilever beam style RF microelectromechanical systems (MEMS) switches (2005) (24)
- A mechanics-of-materials model for predicting Young's modulus of damaged woven fabric composites involving three damage modes (2003) (24)
- Design aspects of the end-notch adhesive joint specimen (1988) (23)
- A Nanoindenter Based Method for Studying MEMS Contact Switch Microcontacts (2008) (23)
- Fretting behavior of shot peened Ti–6Al–4V under slip controlled mode (2006) (23)
- Characterization of Fatigue Behavior in Cross-Ply Laminate of SCS-6/Ti-15-3 Metal Matrix Composite at Elevated Temperature (1992) (22)
- Modeling of Fatigue in Cross-Ply Ceramic Matrix Composites (1997) (22)
- Shear force effects on fretting fatigue behavior of Ti-6Al-4V (2004) (22)
- Fatigue Behavior of Hi-Nicalon Type-S™/BN/SiC Ceramic Matrix Composites in a Combustion Environment (2011) (21)
- A non-linear micromechanics-based analysis of metal-matrix composite laminates (1994) (21)
- Thermo-mechanical fatigue behavior of a cross-ply SCS-6/Ti-15-3 metal-matrix composite (1994) (21)
- A Comparison of Analysis Tools for Predicting the Inelastic Cyclic Response of Cross-Ply Titanium Matrix Composites (1996) (21)
- Tension-Compression Fatigue Behavior of a Silicon Carbide Calcium-Aluminosilicate Ceramic Matrix Composite (1994) (21)
- Investigation into relative slip during fretting fatigue under partial slip contact condition (2005) (21)
- Fatigue and creep behaviors of a SiC/SiC composite under combustion and laboratory environments (2016) (20)
- Electrical conductivity, strength and microstructure of carbon nanotube multi-yarns (2015) (20)
- Tensile fracture behaviour of fibre-reinforced ceramic-matrix composite with hole (1994) (20)
- Modeling of Matrix Failure in Ceramic Matrix Composites (1997) (20)
- Failure mechanisms in laminates of silicon carbide/calcium-aluminosilicate ceramic composite (1992) (20)
- Fatigue and stress-rupture behaviors of SiC/SiC composite under humid environment at elevated temperature (2006) (20)
- Interaction of High-Cycle and Low-Cycle Fatigue on Fretting Behavior of Ti-6-4 (2000) (20)
- Tension-compression fatigue behavior of a unidirectional titanium-matrix composite at elevated temperature (1997) (20)
- Durability of Cu–Al coating on Ti–6Al–4V substrate under fretting fatigue (2006) (19)
- Interaction of mixed mode loading on cyclic debonding in adhesively bonded composite joints (1987) (19)
- Investigation Into Cumulative Damage Rules to Predict Fretting Fatigue Life of Ti-6Al-4V Under Two-Level Block Loading Condition (2003) (19)
- Failure analysis of carbon nanotube wires (2012) (19)
- Fretting fatigue behavior of Ti–6Al–4V under seawater environment ☆ (2005) (18)
- A Two Dimensional Rule-of-Mixtures Micromechanics Model for Woven Fabric Composites (2000) (18)
- Fretting fatigue behavior of Ti–6Al–4V at elevated temperature☆ (2005) (18)
- Fatigue behavior of a fiber-reinforced ceramic-matrix composite with a circular hole (1993) (18)
- Characterization of fretting wear behavior of Cu-Al coating on Ti-6Al-4V substrate (2007) (18)
- The Dugdale Model for Compact Specimen (1985) (18)
- Some Observations on Frictional Force During Fretting Fatigue (2004) (18)
- Fretting Fatigue Behavior of Cavitation Shotless Peened Ti–6Al–4V (2009) (18)
- Fatigue behavior of sylramic-iBN/BN/CVI SiC ceramic matrix composite in combustion environment (2015) (18)
- Relative Slip on Contact Surface under Partial Slip Fretting Fatigue Condition (2006) (17)
- Fatigue Behavior of a Nextel Tm 720\Alumina (N720\A) Composite at Room and Elevated Temperature (2008) (17)
- Investigation into Tangential Force and Axial Stress Effects on Fretting Fatigue Behavior (2006) (17)
- Delamination Growth in Graphite/Epoxy Composites Subjected to Cyclic Mode III Loading (1989) (17)
- Computational modelling of shot-peening effects on crack propagation under fretting fatigue (2003) (17)
- Tension-tension fatigue behavior of carbon nanotube wires (2013) (17)
- Effects of Shot‐Peening on Fretting Fatigue Crack Growth Behavior in Ti‐6Al‐4V (2011) (17)
- Elastic–Plastic Multi-Asperity Contact Analysis of Cylinder-on-Flat Configuration (2007) (17)
- Micromechanical analysis of metal matrix composite laminates with fiber/matrix interfacial damage (1994) (17)
- On Crack Initiation Mechanisms in Fretting Fatigue (2001) (17)
- Effects of moisture on tensile stress rupture behavior of a SiC/SiC composite at elevated temperatures (2008) (16)
- Dynamic photoelastic and dynamic finite-element analyses of dynamic-tear-test specimens (1978) (16)
- A Study of Global vs. Local Properties for Maleic Anhydride Modified Polypropylene Nanocomposites (2006) (16)
- Tension–Tension Fatigue Behavior of NextelTM720/Alumina under Combustion Environment (2012) (16)
- Modelling thermomechanical fatigue crack growth rates in Ti24Al11Nb (1994) (16)
- Criterion for mixed mode fracture in composite bonded joints (1986) (16)
- Creep and inverse stress relaxation behaviors of carbon nanotube yarns. (2013) (15)
- Investigation into crack initiation from corrosion pit in 7075-T6 under ambient laboratory and saltwater environments (2015) (15)
- Wear analysis of Cu–Al coating on Ti–6Al–4V substrate under fretting condition (2005) (15)
- Thermo‐Mechanical Fatigue Behavior of Cross‐Ply Ceramic Matrix Composite Under Tension‐Tension Loading (2008) (15)
- A micromechanistic-based approach to fatigue life modeling of titanium-matrix composites (1997) (15)
- Effects of moisture on fatigue behavior of SiC/SiC composite at elevated temperature (2005) (15)
- Cohesive-Shear-Lag Model for Cycling Stress-Strain Behavior of Unidirectional Ceramic Matrix Composites (2003) (15)
- Characterization of Fatigue Behavior in Quasi-Isotropic Laminate of Ceramic Composite (1992) (14)
- Fatigue behavior of a cross-ply titanium matrix composite under tension-tension and tension-compression cycling (1995) (14)
- Rapid crack propagation and arrest in polymers (1979) (14)
- The use of carbon nanotube yarn as a filter medium to treat nitroaromatic-contaminated water (2016) (14)
- Investigation into microstructure of carbon nanotube multi-yarn (2014) (14)
- Fretting Wear Behavior of Cu–Al Coating on Ti-6Al-4V Substrate under Dry and Wet (Lubricated) Contact Condition (2007) (13)
- Failure Analysis and Damage Initiation in Carbon-Carbon Composite Materials under Three-Point Bending (1991) (13)
- Thermal Transport Properties of Dry Spun Carbon Nanotube Sheets (2016) (13)
- Effects of microstructure on fretting fatigue behavior of IN100 (2010) (13)
- Methodology to analyse aerospace structures repaired with a bonded composite patch (1999) (13)
- STRESS ANALYSIS of the CRACKED LAP SHEAR SPECIMEN: An ASTM ROUND ROBIN (2008) (12)
- Biaxial Fatigue Crack Growth Behavior in Aluminum Alloy 5083-H116 Under Ambient Laboratory and Saltwater Environments (2015) (12)
- High temperature fretting fatigue behavior of IN100 (2010) (11)
- Residual Stress Relaxation Due to Fretting Fatigue in Shot Peened Surfaces of Ti‐6Al‐4V (2003) (11)
- Dynamic Fracture Analysis of Notched Bend Specimens (1980) (11)
- Impacted Notch Bend Specimens (1982) (11)
- Crack Initiation and Growth from Pre-corroded Pits in Aluminum 7075-T6 Under Laboratory Air and Salt Water Environments (2017) (11)
- Structural integrity issues during piezoelectric vibration suppression of composite structures (1999) (11)
- Investigation of Creep/Fatigue Interaction on Crack Growth in a Titanium Aluminide Alloy (1990) (11)
- Frequency effects on fatigue behavior of Nextel720™/alumina at room temperature (2008) (11)
- Effect of disbond on fatigue behavior of cracked aluminum panel with bonded composite patch (1996) (11)
- Effects of combustion and salt-fog exposure on fatigue behavior of two ceramic matrix composites and a superalloy (2015) (11)
- Longitudinal fatigue response of a metal matrix composite under strain controlled mode at elevated temperature (1994) (10)
- Incorporating Fiber Damage in a Micromechanical Analysis of Metal Matrix Composite Laminates (1996) (10)
- The effects of frequency and temperature on the fatigue behavior of a unidirectional titanium-matrix composite (1999) (10)
- Investigation of high cycle and low cycle fatigue interaction on fretting behavior (2002) (10)
- Fretting Fatigue Behavior of Cu-Al-Coated Ti-6Al-4V (2007) (10)
- Analysis of transverse cracking in cross-ply composite laminates (1998) (10)
- A Simplified Approach for Modeling Fatigue of Unidirectional Ceramic Matrix Composites (1996) (10)
- Frequency Effects on Fatigue Behavior of a Silicon Carbide Fiber‐Reinforced Glass–Ceramic Composite (SiC/MAS) (2009) (10)
- Fatigue behavior of Zn–Ni and Cd coated AISI 4340 steel with scribed damage in saltwater environment (2016) (10)
- Dynamic Finite Element and Dynamic Photoelastic Analyses of Crack Arrest in Homalite-100 Plates (1976) (10)
- Bonded Composite Patch Geometry Effects on Fatigue Crack Growth in Thin and Thick Aluminum Panels (2009) (10)
- Mechanics of two-stage crack growth in fretting fatigue (2008) (9)
- Fatigue behavior of adhesively bonded joints (1983) (9)
- Monotonic tension and creep behavior of single crystal CMSX-486 under combustion environment (2013) (9)
- Fatigue behavior of double-edge notched oxide/oxide ceramic matrix composite in a combustion environment (2017) (9)
- Dynamic Finite Element Analyses of Two Compact Specimens (1978) (9)
- Strength of Composite Laminate with Reinforced Hole (1989) (9)
- Crack growth in a titanium aluminide alloy under thermal mechanical cycling (1991) (9)
- Modeling behavior of cross-ply ceramic matrix composites under quasi-static loading (1995) (9)
- Strength degradation during fatigue of unidirectional and cross-ply SCS-6/Ti-15-3 composites (1999) (8)
- Characterization of Fracture in Fiber‐Reinforced Ceramic Composites under Shear loading (1989) (8)
- Dynamic Photoelasticity and Dynamic Finite Element Analyses of Polycarbonate Dynamic Tear Test Specimens. (1978) (8)
- Degradation of Cu-Al Coating on Ti-6AI-4V Substrate under Fretting Fatigue Conditions (2003) (8)
- Effect of Filler Size and Matrix Properties on Fracture Toughness of Particulate Composites (1987) (8)
- Tension-compression fatigue behaviour of fibre-reinforced ceramic matrix composite with circular hole (1995) (8)
- Evolution of fretting fatigue damage and relaxation of residual stress in shot-peened Ti-6Al-4V (2005) (8)
- Fatigue Characterization of a Melt‐Infiltrated Woven HI‐NIC‐S/BN/SIC Ceramic Matrix Composite (CMC) Using a Unique Combustion Test Facility (2009) (8)
- Time-dependent electrical properties of carbon nanotube yarns (2015) (8)
- The Split Cantilever Beam Test for Characterizing Mode III Interlaminar Fracture Toughness (1991) (8)
- Relationships between tensile behavior, physical parameters and manufacturing parameters of carbon nanotube sheet (2017) (8)
- Use of an eight-node element for fast fracture problems (1980) (8)
- Tension-Compression Fatigue Behavior of a Silicon Carbide Calcium-Aluminosilicate Ceramic Matrix Composite (1994) (8)
- Tensile fracture behavior of notched fiber reinforced titanium metal matrix composite (1994) (7)
- Thermomechanical Fatigue Behavior of a Quasi-lsotropic SCS-6/Ti-15-3 Metal Matrix Composite (1995) (7)
- Two-Dimensional and Three-Dimensional Finite Element Analysis of Finite Contact Width on Fretting Fatigue (2011) (7)
- Creep Behavior of Nextel™ 610/Monazite/Alumina Composite at Elevated Temperatures (2005) (7)
- Tensile and fatigue behavior of oxide/oxide ceramic matrix composite with simulated foreign object damage in combustion environment (2018) (7)
- Modeling and Analysis of Cylindrical Nanoindentation of Graphite (2009) (7)
- Fatigue Behavior of a Cross-Ply Titanium Matrix Composite with Tensile and Zero Mean Load at Elevated Temperature (1997) (7)
- Characterization of Carbon Nanofibre Reinforced Epoxy Composite using Nanoindentation and AFM/UFM Techniques (2006) (7)
- Evolution of residual stresses in a stress-free titanium alloy subjected to fretting fatigue☆ (2006) (6)
- Investigation into Corrosion Pit-to-Fatigue Crack Transition in 7075-T6 Aluminum Alloy (2017) (6)
- Elevated Temperature Crack Growth in Aircraft Engine Materials (1992) (6)
- Aircraft Tire Spin-Up Wear Analysis through Experimental Testing and Computational Modeling (2016) (6)
- Fretting Fatigue Crack Initiation Behavior of Ti-6Al-4V (2003) (6)
- Tensile behavior of carbon nanotube multi-yarn coated with polyester (2015) (6)
- Load ratio effects on fatigue response of titanium matrix composite at elevated temperature (1999) (6)
- Nondestructive Characterization of Fretting Fatigue Damage (2004) (6)
- Developing a sensor, actuator, and nanoskin based on carbon nanotube arrays (2006) (6)
- Analysis of Fretting Fatigue of Cavitation Shotless Peened Ti–6Al–4V (2010) (6)
- Temperature and Moisture Effects Upon Stress Rupture Life of Syl‐iBN/BN/Sic Composite (2008) (6)
- Cryogenic Tensile Strength and Fatigue Life of Carbon Nanotube Multi-Yarn. (2016) (6)
- Contact geometry effects on fretting fatigue crack initiation behaviour of Ti–6Al–4V (2008) (6)
- Fracture Evaluation of a Thermoplastic Polyimidesulfone as Adhesive (1987) (6)
- Scattering of antiplane shear waves by a submerged crack (1982) (6)
- Cyclic heating of a layered plate with an interface flaw (1991) (6)
- Bonded joint strength - Static versus fatigue (1984) (6)
- Fracture Dynamics of Wedge-Loaded Double Cantilever Beam Specimen (1976) (6)
- Characterization of Gold–Gold Microcontact Behavior Using a Nanoindenter Based Setup (2010) (5)
- Relaxation-Controlled Cyclic Delamination Growth in Advanced Thermoset and Thermoplastic Composites at Elevated Temperature (1989) (5)
- Corrosion fatigue of coated AISI 4340 high strength steel with dent damage (2018) (5)
- Transverse Fatigue Response of a Metal Matrix Composite Under Strain-Controlled Mode at Elevated Temperature: Part II—Analysis (1996) (5)
- Evolution of residual stress under fretting fatigue (2004) (5)
- Fatigue behavior of integrally fabricated joints between titanium matrix composite and titanium alloy (2007) (5)
- Cyclic and sustained loading behaviors of oxide/oxide Nextel™720/alumina composite with double edge sharp notch (2012) (5)
- Dynamic Finite Element Analysis of Cracked Bodies with Stationary Cracks (1980) (5)
- Electromagnetic interference and electrical conductivity behavior of carbon/polycyanate composite with nickel nanostrands™ under fatigue (2011) (5)
- Isothermal fatigue behavior of a titanium matrix composite under a hybrid strain-controlled loading condition (1995) (5)
- Influence of loading history on fatigue threshold behavior in a titanium alloy (1990) (5)
- Enhancement of Fretting Fatigue Strength through Stress-Relieving Slot # (2006) (5)
- Crack Initiation from Corrosion Pit in Three Aluminum Alloys Under Ambient and Saltwater Environments (2016) (5)
- Fretting Fatigue Behavior of Shot-Peened Ti-6Al-4V and IN100 (2008) (5)
- High-Temperature Cross-Linking of Carbon Nanotube Multi-Yarn Using Polyvinylpyrrolidone as a Binding Agent. (2015) (4)
- A thermal-mechanical fatigue crack-growth testing system (1989) (4)
- A Numerical Dynamic Fracture Analyses of Three Wedge-Loaded DCB Specimens. (1977) (4)
- The fracture toughness of wood under impact loading (1984) (4)
- Mechanical behavior of a fiber reinf orced ceramic composite under off-axis loading (1992) (4)
- Fretting Fatigue and Stress Relaxation Behaviors of Shot-Peened Ti-6Al-4V (2005) (4)
- In-situ characterization of microstructural changes in a carbon nanotube sheet under sustained load (2017) (4)
- Compressive behavior of a titanium metal matrix composite with a circular hole (1995) (4)
- Fracture Behavior of a Fiber-Reinforced Titanium Matrix Composite with Open and Filled Holes at Room and Elevated Temperatures (1994) (4)
- Fatigue behavior of Nextel™ 312/Blackglas™ ceramic matrix composite with tensile and zero mean load (2001) (3)
- ANALYSIS OF CRACKED METALLIC STRUCTURE WITH IMPERFECTLY BONDED COMPOSITE PATCH (1997) (3)
- Investigation into cylinder-on-flat adhesion elastic–plastic micro-contact under repeated loading and unloading condition (2007) (3)
- Influence of resin on delamination (2008) (3)
- Edge cracks in a laminated cross-ply strip (1989) (3)
- Crack Growth Rate Behavior of a Titanium-Aluminide Alloy During Isothermal and Nonisothermal Conditions (1995) (3)
- Modeling of progressive damage in unidirectional ceramic matrix composites (1995) (3)
- Fracture Dynamics of Wedge-Loaded DCB Specimen. (1975) (3)
- DYNAMIC PHOTOELASTIC ANALYSIS OF CRACK BRANCHING (1975) (3)
- The fracture behavior of thin 6061 T-6 aluminum at rapid heating rates (1989) (3)
- Mode II fracture toughness testing of a fiber-reinforced ceramic composite (1991) (3)
- Mixed-mode cyclic debonding of adhesively bonded composite joints. M.S. Thesis (1985) (3)
- Degradation of residual strength in SCS-6/Ti-15-3 Due to fully reversed fatigue (1999) (3)
- Influence of Resin on Delamination and Debonding Mechanisms of Composite Materials under Fatigue Loading (1991) (2)
- Crack-surface displacements for two symmetric cracks emanating from a circular hole in an infinite plate (1986) (2)
- Adhesion force during microcontact interaction between cylindrical-segment-on-flat and flat bodies (2008) (2)
- Characterization of carbon nanotube yarn after exposure to hyperthermal atomic oxygen and thermal fatigue (2016) (2)
- Creep-rupture behaviour of notched oxide/oxide ceramic matrix composite in combustion environment (2018) (2)
- Combined Adhesion and Friction Effects on Cylinder-on-Flat Elastic–Plastic Microcontact (2009) (2)
- Interaction of a P-Wave With a Laterally Stiffened Slot (1983) (2)
- DYNAMIC PHOTOELASTIC ANALYSIS OF THREE FRACTURE SPECIMENS (1976) (2)
- Thermo-mechanical fatigue behavior of an angle-ply SCS-6/Ti-15-3 metal matrix composite (1994) (2)
- Life Prediction of Fretting Fatigue of Ti-6Al-4V (2006) (1)
- High-temperature thermal barrier-coated Sylramic-iBN/pyrolytic carbon/chemical vapor infiltration silicon carbide ceramic matrix composite behavior in a combustion environment (2018) (1)
- Response of Graphite/Epoxy Laminates Embedded with Piezoelectric Sensor Under Fatigue Loading (2008) (1)
- Antiplane vibration of an elastic layer with a midplane crack (1983) (1)
- Constitutive behavior of high-temperature composites : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992 (1992) (1)
- Advances in adhesively bonded joints : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988 (1988) (1)
- Interrelationship Between Hardness and Resistivity of Metal Alloy Films as Contact Materials in MEMS Switches (2006) (1)
- Effect of UVB Light Exposure on Tensile Behavior of Carbon Nanotube Sheet. (2018) (1)
- Strength Reduction and Damage Characterization of SCS6/Ti-6Al-4V Composite Exposed to Fatigue at Elevated Temperature (1998) (1)
- A Nanoindenter Based Investigation of Gold–Ruthenium Alloy Microcontact Behavior under Cyclic Condition (2012) (1)
- Fatigue Behavior of an Oxide/Oxide CMC Under Combustion Environment (2010) (1)
- An integral-equation formulation of nonlinear deformation in a stack of buffered plates (2010) (1)
- Prediction of fretting fatigue crack initiation based on the plane of maximum shear stress amplitude (2000) (1)
- Tension-Tension Fatigue Behavior of Natched NextelTM 720/Alumina (N720A) at Elevated Temperature (2009) (1)
- Debonding characteristics of adhesively bonded woven Kevlar composites (1988) (1)
- Characterization of mode II fracture behavior in fiber-reinforced ceramic composite utilizing laser interferometry (1992) (1)
- Optical Response of Metakaolin after Ultraviolet and High Energy Electron Exposure (2014) (1)
- Fatigue Behavior of Resin Infusion Processed S2-Glass Woven Composites (1997) (0)
- Interaction of shear waves with a periodic array of rigid strips (1989) (0)
- A PROCEDURE FOR EVALUATING FRACTURE DYNAMIC PARAMETERS FROM CRACK VELOCITY MEASUREMENTS (1977) (0)
- Fretting Fatigue Crack Nucleation Criterion for Ti-6Al-4V (2003) (0)
- Effect of Dissimilar Mating Materials on Fretting Fatigue of Ti-6Al-4V (2003) (0)
- Micromechanical Analysis and Modeling (2020) (0)
- A Comparison of Different Test Techniques on Fatigue Threshold Behavior of Surface Flaws in a Titanium Alloy (1989) (0)
- DAMAGE EFFECTS ON STRENGTH AND LIFE OF OXIDE/OXIDE CMC IN COMBUSTION ENVIRONMENT (2017) (0)
- Fatigue Behavior of a Cross-Ply Metal Matrix Composite at Elevated Temperature Under the Strain Controlled Mode (1997) (0)
- Analysis of the Thermo-Mechanical Fatigue Response of Metal Matrix Composite Laminates with Interfacial Normal and Shear Failure (1996) (0)
- Investigation into Wear Behavior of Cu-Al Coating on Titanium alloy under Fretting Fatigue (2007) (0)
- Notched behavior of ceramic composite (1995) (0)
- Residual Strength Degradation of Cross-Ply Titanium Matrix Composite Due to Elevated Temperature (1999) (0)
- Investigation of the Fatigue Behavior of SCS-Ultra/Ti-6-4 (1998) (0)
- Fatigue Response of Joint between Titanium and Titanium Matrix Composite (2006) (0)
- Effects of Stress-Relieving Slots on Fretting Fatigue Behavior of Ti-6Al-4V (2005) (0)
- Investigation of Damage in Unidirectional Ceramic Matrix Composites Using a Cohesive-Shear-Lag Model (2001) (0)
- A multi-scale model for bending stiffness of cnt strands in cnt fibers (2017) (0)
- Adhesive Elastic–Plastic Microcontact Analysis of Truncated Cylinder-on-Flat with Asperities (2010) (0)
- FRETTING FATIGUE BEHAVIOUR OF IN100 AT ROOM TEMPERATURE (2011) (0)
- Scattering of an Elastic Wave by a Sub-Surface Elastic Fiber (1984) (0)
- The effect of fiber failure on the response and strength of metal matrix composites (1995) (0)
- Response of Subsurface Rigid Strips to Plane Harmonic Shear Waves (1991) (0)
- Investigation into Cyclic Frequency Effects on Fatigue Behavior of an Oxide/Oxide Composite (2009) (0)
- CRACKED MOSAIC MODEL OF WOVEN COMPOSITES WITH TRANSVERSE YARN CRACKING AND INTERFACE DEBONDING (2002) (0)
- Fatigue and fracture at elevated temperatures : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California (1995) (0)
- Mode III Dynamic Stress Intensity for Two Colinear Cracks at a Bimaterial Interface (1982) (0)
- Modifications to Classical Shear-Lag Models Required for Prediction of Laminate Degradation due to Fiber Failure and Associated Mechanisms (1997) (0)
- Residual stresses and damage in unidirectional model composites (2008) (0)
- Fatigue Behavior of Nextel™720/Alumina (N720/A) Continuous Fiber Ceramic Composite ‐ Effects of Temperature and Steam Environment (2012) (0)
- Electromagnetic interference and electrical conductivity characteristics of carbon/polycyanate composite with nanostrandsTM under tensile load (2009) (0)
- Initial Trajectories of Propagation of Fatigue Cracks Under Biaxial Cyclic Loading with Phase Difference (2015) (0)
- Influence of Fiber Inertia on the Stress Intensity Around a Subsurface Elastic Fiber (1985) (0)
- Characterization of Wear of a Soft Coating Deposited on Titanium Alloy During Fretting (2005) (0)
- Investigation into Nanocomposites for Lightning Strike Protection (2009) (0)
- D053 Relaxation of Residual Stress in Shot Peened Ti-6A1-4V Due to Fretting Fatigue (2003) (0)
- Dynamic finite element analysis of a fast running crack band (1982) (0)
- A finite element analysis of transient crack problems with a path independent integral (2013) (0)
- RESIDUAL STRESS RELAXATION DUE TO FRETTING FATIGUE IN SHOT PEENED SURFACES OF T 1-6 A 1-4 V (2003) (0)
- Photometric Response of Illite After Simulated Space Exposure (2014) (0)
- DYNAMIC FINITE ELEMENT AND DYNAMIC PHOTOELASTIC ANALYSES OF AN IMPACTED PRETENSIONED PLATE. (1978) (0)
- Fatigue behavior of a cross-ply metal matrix composite at elevated temperature uner the strain (1997) (0)
- Dynamic Stress Intensity Factor of Homalite-100 (1976) (0)
- Instrumented Indentation on Intercalated Clay Reinforced Polypropylene Nanocomposites (2006) (0)
- Tension-Compression Fatigue Behavior of IM7/EPON 862 Fabricated Using VARTM Process (2008) (0)
- Residual Strength Degradation of a Titanium Matrix Composite Subjected to Elevated Temperature Fatigue (1999) (0)
- Micromechanics-Based Inelastic Analysis of Fiber Reinforced Titanium Metal Matrix Composite Laminates (1995) (0)
- Notch sensitivity of A Ceramic Composite with A Circular Hole (1993) (0)
- Effects of Pre-Damage on HCF Behaviors of Ti-6Al-4V Alloy (2003) (0)
- Inorganic Polymers for Space Applications (2008) (0)
- EFFECT OF SHEAR FORCE ON FRETTING FATIGUE BEHAVIOR OF TI-6Al-4V (2002) (0)
- D-9 Relaxation of Residual Stress in Shot Peened Ti-6Al-4V Due to Fretting Fatigue (2004) (0)
- Interaction of a crack with a pair of thin, elastic inclusions (1991) (0)
- Fretting Fatigue Wear Behavior of Cu-Al Coating on Titanium Alloy Substrate (2007) (0)
- Surface Texture of Fretting Fatigue Damaged Shot Peened Titanium (2006) (0)
- FRETTING FATIGUE BEHAVIOR OF TI-6Al-4V UNDER DISPLACEMENT CONTROL OF PAD (2002) (0)
- Frequency Effects Upon the High‐Cycle Fatigue of a CVIC/SiC Composite at Room Temperature (2008) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Shankar Mall?
Shankar Mall is affiliated with the following schools:
