Siew‐hwa Chan
#156,346
Most Influential Person Now
Siew‐hwa Chan's AcademicInfluence.com Rankings
Siew‐hwa Chanchemistry Degrees
Chemistry
#4399
World Rank
#5479
Historical Rank
Nanotechnology
#150
World Rank
#150
Historical Rank
Chemical Engineering
#556
World Rank
#575
Historical Rank

Siew‐hwa Chanengineering Degrees
Engineering
#6534
World Rank
#7868
Historical Rank
Materials Science
#373
World Rank
#377
Historical Rank

Download Badge
Chemistry Engineering
Siew‐hwa Chan's Degrees
- PhD Chemical Engineering University of California, Berkeley
- Masters Chemical Engineering University of California, Berkeley
- Bachelors Chemical Engineering University of California, Berkeley
Why Is Siew‐hwa Chan Influential?
(Suggest an Edit or Addition)Siew‐hwa Chan's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- POLYMER NANOCOMPOSITES BASED ON FUNCTIONALIZED CARBON NANOTUBES (2010) (1491)
- A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness (2001) (832)
- A review of anode materials development in solid oxide fuel cells (2004) (553)
- Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte (2008) (313)
- Enhancement effect of Ag for Pd/C towards the ethanol electro-oxidation in alkaline media (2009) (301)
- Graphene‐Based Materials for Energy Conversion (2012) (285)
- Solid Oxide Fuel Cell Anode Materials for Direct Hydrocarbon Utilization (2012) (235)
- Poly(vinyl alcohol) nanocomposites filled with poly(vinyl alcohol)-grafted graphene oxide. (2012) (226)
- Catalysis mechanisms of CO2 and CO methanation (2016) (225)
- Heterogeneous catalytic conversion of CO2: a comprehensive theoretical review. (2015) (223)
- Low-temperature SOFC with thin film GDC electrolyte prepared in situ by solid-state reaction (2004) (221)
- Multi-level modeling of SOFC–gas turbine hybrid system (2003) (221)
- A review on membraneless laminar flow-based fuel cells (2011) (212)
- A membraneless hydrogen peroxide fuel cell using Prussian Blue as cathode material (2012) (205)
- Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte (2002) (186)
- Amino acid modified copper electrodes for the enhanced selective electroreduction of carbon dioxide towards hydrocarbons (2016) (182)
- High-performance low-temperature solid oxide fuel cell with novel BSCF cathode (2006) (179)
- CO2 Electroreduction Performance of Transition Metal Dimers Supported on Graphene: A Theoretical Study (2015) (170)
- Effect of transition metal oxides on densification and electrical properties of Si-containing Ce0.8Gd0.2O2−δ ceramics (2004) (140)
- Recent development of hydrogen and fuel cell technologies: A review (2021) (138)
- Towards a smart energy network: The roles of fuel/electrolysis cells and technological perspectives (2015) (138)
- Aging behavior and ionic conductivity of ceria-based ceramics: a comparative study (2004) (136)
- Micromachined polymer electrolyte membrane and direct methanol fuel cells—a review (2006) (133)
- Pt and Ru dispersed on LiCoO2 for hydrogen generation from sodium borohydride solutions (2008) (131)
- Correlation between dispersion state and electrical conductivity of MWCNTs/PP composites prepared by melt blending (2010) (129)
- A review of electrocatalysts with enhanced CO tolerance and stability for polymer electrolyte membarane fuel cells (2013) (128)
- (La0.75Sr0.25)(Cr0.5Mn0.5)O3/YSZ composite anodes for methane oxidation reaction in solid oxide fuel cells (2006) (128)
- Iron oxide as an effective sintering aid and a grain boundary scavenger for ceria-based electrolytes (2004) (123)
- Kinetic and modelling study of methane steam reforming over sulfide nickel catalyst on a gamma alumina support (2005) (123)
- Enhancement of mass transfer in a proton exchange membrane fuel cell with blockage in the flow channel (2019) (110)
- A review on modelling of high temperature proton exchange membrane fuel cells (HT-PEMFCs) (2017) (108)
- The role of hydrogen and fuel cells to store renewable energy in the future energy network – potentials and challenges (2014) (108)
- Improvement of mechanical and thermal properties of carbon nanotube composites through nanotube functionalization and processing methods (2009) (108)
- Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): A review (2021) (95)
- Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell (2010) (93)
- Curvature-Dependent Selectivity of CO2 Electrocatalytic Reduction on Cobalt Porphyrin Nanotubes (2016) (90)
- Energy analysis of a hybrid PEMFC–solar energy residential micro-CCHP system combined with an organic Rankine cycle and vapor compression cycle (2017) (89)
- Carbon corrosion and performance degradation mechanism in a proton exchange membrane fuel cell with dead-ended anode and cathode (2016) (86)
- Effect of characteristics of Y2O3/ZrO2 powders on fabrication of anode-supported solid oxide fuel cells (2003) (85)
- Specific Functionalization of Carbon Nanotubes for Advanced Polymer Nanocomposites (2009) (85)
- Modeling and multi-objective optimization of a stand-alone PV-hydrogen-retired EV battery hybrid energy system (2019) (82)
- High performance cathode-supported SOFC with perovskite anode operating in weakly humidified hydrogen and methane (2007) (77)
- Air-breathing membraneless laminar flow-based fuel cell with flow-through anode (2012) (76)
- Development of a polymeric micro fuel cell containing laser-micromachined flow channels (2005) (73)
- Intermediate-temperature ionic conductivity of ceria-based solid solutions as a function of gadolinia and silica contents (2004) (71)
- An air-breathing microfluidic formic acid fuel cell with a porous planar anode: experimental and numerical investigations (2010) (69)
- Energy- and exergy-based working fluid selection and performance analysis of a high-temperature PEMFC-based micro combined cooling heating and power system (2017) (67)
- Sinterability and ionic conductivity of coprecipitated Ce0.8Gd0.2O2−δ powders treated via a high-energy ball-milling process (2003) (66)
- Effect of Sr Surface Segregation of La0.6Sr0.4Co0.2Fe0.8O3 − δElectrode on Its Electrochemical Performance in SOC (2015) (62)
- Thermodynamic analysis of combined solid oxide electrolyzer and fischer-tropsch processes (2015) (62)
- Mitigation studies of carbon corrosion by optimizing the opening size of the cathode outlet in a proton exchange membrane fuel cell with dead-ended anode (2016) (61)
- Evaluation criterion of different flow field patterns in a proton exchange membrane fuel cell (2020) (60)
- Partial flooding and its effect on the performance of a proton exchange membrane fuel cell (2020) (59)
- A laser-micromachined polymeric membraneless fuel cell (2007) (58)
- Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field (2020) (58)
- Annealing induced electrical conductivity jump of multi‐walled carbon nanotube/polypropylene composites and influence of molecular weight of polypropylene (2010) (56)
- Effects of dopant concentration and aging on the electrical properties of Y-doped ceria electrolytes (2003) (55)
- Different conduction behaviors of grain boundaries in SiO2-containing 8YSZ and CGO20 electrolytes (2006) (55)
- Production of sustainable methane from renewable energy and captured carbon dioxide with the use of Solid Oxide Electrolyzer: A thermodynamic assessment (2015) (55)
- Paper-based membraneless hydrogen peroxide fuel cell prepared by micro-fabrication (2016) (54)
- Performance degradation of a proton exchange membrane fuel cell with dead-ended cathode and anode (2018) (54)
- A mathematical model of polymer electrolyte fuel cell with anode CO kinetics (2003) (54)
- Complementary effects of multiwalled carbon nanotubes and conductive carbon black on polyamide 6 (2010) (52)
- Development of carbon-filled gas diffusion layer for polymer electrolyte fuel cells (2006) (52)
- Air-breathing microfluidic fuel cell with fuel reservoir (2012) (51)
- PtFeNi tri-metallic alloy nanoparticles as electrocatalyst for oxygen reduction reaction in proton exchange membrane fuel cells with ultra-low Pt loading (2013) (51)
- Pd particle size effects on oxygen electrochemical reduction (2014) (49)
- Current Advances in the Carbon Nanotube/Thermotropic Main-Chain Liquid Crystalline Polymer Nanocomposites and Their Blends (2012) (48)
- Modelling of engine in-cylinder thermodynamics under high values of ignition retard (2001) (47)
- Performance of power generation extension system based on solid-oxide electrolyzer cells under various design conditions (2013) (47)
- Determination of the optimal operating temperature range for high temperature PEM fuel cell considering its performance, CO tolerance and degradation (2015) (47)
- Progress and perspectives of integrated thermal management systems in PEM fuel cell vehicles: A review (2022) (46)
- Improvement in properties of multiwalled carbon nanotube/polypropylene nanocomposites through homogeneous dispersion with the aid of surfactants (2012) (46)
- Supported PtAu catalysts with different nano-structures for ethanol electrooxidation (2014) (45)
- Energy and exergy analysis of Solid Oxide Electrolyser Cell (SOEC) working as a CO2 mitigation device (2012) (45)
- Hydrogen production for fuel cells by autothermal reforming of methane over sulfide nickel catalyst on a gamma alumina support (2006) (45)
- Physical principles for the calculation of equilibrium potential for co-electrolysis of steam and carbon dioxide in a Solid Oxide Electrolyzer Cell (SOEC) (2014) (43)
- Performance and emissions characteristics of a partially insulated gasoline engine (2001) (43)
- Physical principles for the calculation of equilibrium potential for co-electrolysis of steam and carbon dioxide in a Solid Oxide Electrolyzer Cell (SOEC) (2014) (43)
- Solid Oxide Electrolyzer Cell Modeling: A Review (2013) (41)
- Anti-flooding cathode catalyst layer for high performance PEM fuel cell (2009) (41)
- The role of electronic properties of Pt and Pt alloys for enhanced reformate electro-oxidation in polymer electrolyte membrane fuel cells (2013) (40)
- Experimental and thermodynamic study on the performance of water electrolysis by solid oxide electrolyzer cells with Nb-doped Co-based perovskite anode (2017) (37)
- Preparation and characterization of dense Ce0.85Y0.15O2−δ ceramics (2004) (37)
- Performance degradation and recovery characteristics during gas purging in a proton exchange membrane fuel cell with a dead-ended anode (2018) (37)
- Experimental investigation on the mechanism of variable fan speed control in Open cathode PEM fuel cell (2019) (36)
- Hierarchical 3D micro-/nano-V2O5 (vanadium pentoxide) spheres as cathode materials for high-energy and high-power lithium ion-batteries (2014) (36)
- Transient carbon monoxide poisoning kinetics during warm-up period of a high-temperature PEMFC – Physical model and parametric study (2015) (36)
- Tb promoted Pd/C catalysts for the electrooxidation of ethanol in alkaline media (2011) (36)
- Synthesis of MOF-Derived Nonprecious Catalyst with High Electrocatalytic Activity for Oxygen Reduction Reaction (2018) (36)
- Dynamic performance of a high-temperature PEM fuel cell – An experimental study (2015) (36)
- Chain growth mechanism on bimetallic surfaces for higher alcohol synthesis from syngas (2015) (35)
- Effects of hydrophobicity of the cathode catalyst layer on the performance of a PEM fuel cell (2010) (35)
- Long-distance renewable hydrogen transmission via cables and pipelines (2021) (34)
- Understanding the role of cathode structure and property on water management and electrochemical performance of a PEM fuel cell (2013) (34)
- Investigation of heating and cooling in a stand-alone high temperature PEM fuel cell system (2016) (33)
- Fabrication of novel phosphotungstic acid functionalized mesoporous silica composite membrane by alternative gel-casting technique (2013) (33)
- Transient response of performance in a proton exchange membrane fuel cell under dynamic loading (2020) (32)
- Cobalt diselenide nanoparticles embedded within porous carbon polyhedra as advanced electrocatalyst for oxygen reduction reaction (2016) (32)
- Pre-combustion CO2 capture by transition metal ions embedded in phthalocyanine sheets. (2012) (31)
- Activation and failure mechanism of La0.6Sr0.4Co0.2Fe0.8O3−δ air electrode in solid oxide electrolyzer cells under high-current electrolysis (2018) (31)
- High-temperature electrolysis of synthetic seawater using solid oxide electrolyzer cells (2017) (31)
- Investigation of water transport and its effect on performance of high- temperature PEM fuel cells (2014) (30)
- Composite Nafion® membrane embedded with hybrid nanofillers for promoting direct methanol fuel cell performance (2008) (30)
- Numerical investigations on ethanol electrolysis for production of pure hydrogen from renewable sources (2016) (30)
- An experimental study on anode water management in high temperature PEM fuel cell (2015) (29)
- Fuel cell and hydrogen technologies research, development and demonstration activities in Singapore – An update (2016) (29)
- Covalent functionalization of carbon nanotubes for ultimate interfacial adhesion to liquid crystalline polymer (2011) (29)
- Enhanced CO2 electroreduction on armchair graphene nanoribbons edge-decorated with copper (2017) (28)
- Transient performance of an autothermal reformer—A 2-D modeling approach (2005) (28)
- Pd nanoparticles supported on PDDA-functionalized carbon black with enhanced ORR activity in alkaline medium (2014) (28)
- Optimization of BSCF-SDC composite air electrode for intermediate temperature solid oxide electrolyzer cell (2017) (28)
- A review on ions induced contamination of polymer electrolyte membrane fuel cells, poisoning mechanisms and mitigation approaches (2016) (28)
- Gas purging effect on the degradation characteristic of a proton exchange membrane fuel cell with dead-ended mode operation II. Under different operation pressures (2017) (27)
- Facile aqueous phase synthesis of Pd3Cu–B/C catalyst for enhanced glucose electrooxidation (2019) (26)
- Fabrication and characterization of large-size electrolyte/anode bilayer structures for low-temperature solid oxide fuel cell stack based on gadolinia-doped ceria electrolyte (2009) (26)
- Development of a novel cost effective methanol electrolyzer stack with Pt-catalyzed membrane (2014) (26)
- Gas purging effect on the degradation characteristic of a proton exchange membrane fuel cell with dead-ended mode operation I. With different electrolytes (2017) (25)
- Effect of La0.6Sr0.4Co0.2Fe0.8O3−δ air electrode–electrolyte interface on the short-term stability under high-current electrolysis in solid oxide electrolyzer cells (2018) (25)
- Robust solid oxide cells for alternate power generation and carbon conversion (2011) (25)
- The economic feasibility study of a 100-MW Power-to-Gas plant (2019) (25)
- Analytical modelling of boiling phase change phenomenon in high-temperature proton exchange membrane fuel cells during warm-up process (2014) (24)
- Performance improvement in a proton exchange membrane fuel cell with separated coolant flow channels in the anode and cathode (2019) (24)
- Applications of ejectors in proton exchange membrane fuel cells: A review (2020) (24)
- Kinetic Modelling of Partial Oxidation of Methane in an Oxygen Permeable Membrane Reactor (2005) (23)
- Dynamic performance of a high-temperature PEM (proton exchange membrane) fuel cell – Modelling and fuzzy control of purging process (2016) (23)
- Performance enhancement in a H2/O2 PEMFC with dual-ejector recirculation (2022) (23)
- Carbon Nanotube-Based Materials for Fuel Cell Applications (2012) (22)
- The acceleration of methanol synthesis and C2 oxygenates formation on copper grain boundary from syngas (2016) (22)
- Pt nanodendrites anchored on bamboo-shaped carbon nanofiber arrays as highly efficient electrocatalyst for oxygen reduction reaction (2013) (22)
- Addressing energy trilemma via the modified Markowitz Mean-Variance Portfolio Optimization theory (2017) (22)
- A breakthrough hydrogen and oxygen utilization in a H2-O2 PEMFC stack with dead-ended anode and cathode (2021) (21)
- Study of Activation Effect of Anodic Current on La0.6Sr0.4Co0.2Fe0.8O3−δ Air Electrode in Solid Oxide Electrolyzer Cell (2016) (21)
- Double layer capacitance of anode/solid-electrolyte interfaces. (2011) (20)
- Transparent Bamboo with High Radiative Cooling Targeting Energy Savings (2021) (20)
- Membraneless hydrogen peroxide micro semi-fuel cell for portable applications (2014) (19)
- The role of functionalized carbon nanotubes in a PA6/LCP blend. (2010) (18)
- Effects of operating temperature on the carbon corrosion in a proton exchange membrane fuel cell under high current density (2021) (18)
- Modelling of solid oxide electrolyser cell using extreme learning machine (2017) (18)
- Effect of carbon nanotubes and processing methods on the properties of carbon nanotube/polypropylene composites. (2009) (16)
- Influence of pore former on electrochemical performance of fuel-electrode supported SOFCs manufactured by aqueous-based tape-casting (2016) (16)
- Tailoring reduced mechanisms for predicting flame propagation and ignition characteristics in ammonia and ammonia/hydrogen mixtures (2022) (16)
- Techno-Economic Study of Hydrogen Production via Steam Reforming of Methanol, Ethanol, and Diesel (2014) (16)
- Dynamic analysis of a CCHP system based on fuel cells integrated with methanol-reforming and dehumidification for data centers (2022) (16)
- Molecular interaction and properties of poly(ether ether ketone)/liquid crystalline polymer blends incorporated with functionalized carbon nanotubes. (2011) (16)
- The selectivity and activity of catalyst for CO hydrogenation to methanol and hydrocarbon: A comparative study on Cu, Co and Ni surfaces (2016) (16)
- Guidelines for Stable Operation of a Polymer Electrolyte Fuel Cell with Self-Humidifying Membrane Electrolyte Assembly (2007) (15)
- Development of a fiber-based membraneless hydrogen peroxide fuel cell (2017) (15)
- In-Situ Measurement of Humidity Distribution and its Effect on the Performance of a Proton Exchange Membrane Fuel Cell (2021) (15)
- Aqueous tape casting technique for the fabrication of Sc0.1Ce0·01Zr0·89O2+Δ ceramic for electrolyte-supported solid oxide fuel cell (2019) (15)
- Modeling and energy management of a photovoltaic‐fuel cell‐battery hybrid electric vehicle (2019) (15)
- Computational fluid dynamics simulation of polymer electrolyte membrane fuel cells operating on reformate (2011) (15)
- High-temperature electrolysis of simulated flue gas in solid oxide electrolysis cells (2018) (15)
- Water distribution and performance variation in a transparent PEMFC with large active area (2021) (14)
- Enhancing reactant mass transfer inside fuel cells to improve dynamic performance via intelligent hydrogen pressure control (2021) (14)
- Application of self-adaptive temperature recognition in cold-start of an air-cooled proton exchange membrane fuel cell stack (2022) (14)
- Influences of carbon fillers on electrical conductivity and crystallinity of polyethylene terephthalate (2012) (14)
- Theoretical consideration of Solid Oxide Electrolyzer Cell with zirconia-based electrolyte operated under extreme polarization or with low supply of feedstock chemicals (2014) (13)
- An evaluation of electrochemical performance of a solid oxide electrolyzer cell as a function of co-sintered YSZ-SDC bilayer electrolyte thickness (2017) (13)
- Non-aqueous solution synthesis of Pt-based nanostructures for fuel cell catalysts (2020) (13)
- MW cogenerated proton exchange membrane fuel cell combined heat and power system design for eco-neighborhoods in North China (2021) (12)
- Improved efficiency maximization strategy for vehicular dual-stack fuel cell system considering load state of sub-stacks through predictive soft-loading (2021) (12)
- Strengthening of liquid crystalline polymer by functionalized carbon nanotubes through interfacial interaction and homogeneous dispersion (2011) (12)
- Evaluation of impregnated nanocomposite membranes for aqueous methanol electrochemical reforming (2015) (12)
- Fabrication of phosphotungstic acid functionalized mesoporous silica composite membrane by alternative tape-casting incorporating phase inversion technique (2014) (12)
- Nitrophenyl functionalization of carbon nanotubes and its effect on properties of MWCNT/LCP composites (2011) (11)
- Three phase boundaries and electrochemically active zones of lanthanum strontium vanadate–yttria-stabilized zirconia anodes in solid oxide fuel cells (2011) (11)
- Fabrication and electrochemical characterization of Pt–Pd impregnated nanocomposite polymer electrolyte membranes for high concentration DMFCs (2015) (10)
- Poly(diallyldimethylammonium chloride)-functionalized reduced graphene oxide supported palladium nanoparticles for enhanced methanol oxidation (2015) (10)
- Water-gas shift assisted autothermal reforming of methane gas – transient and cold start studies (2009) (10)
- Numerical analysis of high-temperature proton exchange membrane fuel cells during start-up by inlet gas heating and applied voltage (2017) (10)
- Effects of Moisture Dehumidification on the Performance and Degradation of a Proton Exchange Membrane Fuel Cell (2022) (9)
- Synthesis and Characterization of LnBaCo2O5+δ Layered Perovskites as Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells (2009) (9)
- Water distribution and carbon corrosion under high current density in a proton exchange membrane fuel cell (2021) (9)
- Transient analysis of carbon monoxide transport phenomena and adsorption kinetics in HT-PEMFC during dynamic current extraction (2015) (9)
- Technological and Engineering design of a megawatt proton exchange membrane fuel cell stack (2022) (8)
- Energy analysis of an electrolytic-based selective CO oxidation system for on-board pure hydrogen production (2013) (8)
- Assembly of Pt nanowires into cubelike superstructures supported on aligned carbon nanotubes as highly stable electrocatalysts. (2013) (8)
- High Electrochemical Performance of Bi2WO6/Carbon Nano-Onion Composites as Electrode Materials for Pseudocapacitors (2020) (8)
- Effect of Sr 2+ and Ba 2+ doping on structural stability and mechanical properties of La 2 NiO 4+δ (2018) (8)
- Analysis of steady state heating configuration for high-temperature proton exchange membrane fuel cell based on multi-physical numerical modelling (2016) (8)
- A study of short stack with large area solid oxide fuel cells by aqueous tape casting (2016) (7)
- Thermal and structural study of BIVOX undoped and doped with La in various atmosphere toward applications in IT-SOFC (2014) (7)
- Understanding the occurrence of the individual CO2 electrolysis during H2O-CO2 co-electrolysis in classic planar Ni-YSZ/YSZ/LSM-YSZ solid oxide cells (2019) (7)
- Study of CO2 and H2O direct co-electrolysis in an electrolyte-supported solid oxide electrolysis cell by aqueous tape casting technique (2019) (7)
- Feasibility assessment of a container ship applying ammonia cracker-integrated solid oxide fuel cell technology (2022) (7)
- Improvement of properties of polyetherimide/liquid crystalline polymer blends in the presence of functionalized carbon nanotubes. (2009) (7)
- Fast identification of power change rate of PEM fuel cell based on data dimensionality reduction approach (2019) (7)
- Optimal design and operation of polymer electrolyte membrane reactors for pure hydrogen production (2013) (6)
- Sensitivity analysis of anode overpotential during start-up process of a high temperature proton exchange membrane fuel cell (2015) (6)
- Decarbonizing Natural Gas: A Review of Catalytic Decomposition and Carbon Formation Mechanisms (2022) (5)
- Be12O12 Nano-cage as a Promising Catalyst for CO2 Hydrogenation (2017) (5)
- Double layer structure in solid oxide fuel cell anode/electrolyte interfaces: A Monte Carlo study (2011) (5)
- Effect of gas purging on the performance of a proton exchange membrane fuel cell with dead‐ended anode and cathode (2021) (5)
- Small signal modelling and control of high gain coupled inductor boost inverter for solid oxide fuel cell based power generation system (2019) (5)
- Droplet Dynamics in a Proton Exchange Membrane Fuel Cell with Ejector-Based Recirculation (2021) (5)
- Prototype design of an extended range electric sightseeing bus with an air-cooled proton exchange membrane fuel cell stack based on a voltage control logic of hydrogen purging (2022) (4)
- Experimental investigation of open circuit voltage during start-up process of HT-PEMFC (2015) (4)
- Molecular Interactions in PA6, LCP and their Blend Incorporated with Functionalized Carbon Nanotubes (2010) (3)
- Technoeconomic and environmental assessment of HyForce, a hydrogen-fuelled harbour tug (2021) (3)
- Development of a Cylindrical Shape Self-Breathing Mini Fuel Cell Stack (2008) (3)
- Transient performance of turbocharged vehicle diesel engines (1991) (2)
- Catalyst Degradation Mitigation and Fuel Utilization Enhancement of a Dead-Ended Anode and Cathode Proton Exchange Membrane Fuel Cell with Periodical Oxygen Supply (2022) (2)
- Activation of LSCF–YSZ interface by cobalt migration during electrolysis operation in solid oxide electrolysis cells (2022) (2)
- Recent development in design a state-of-art proton exchange membrane fuel cell from stack to system: Theory, integration and prospective (2022) (2)
- Impedance Identification of Lanthanum Strontium Vanadate Anode in H2-H2O-He Atmosphere (2009) (2)
- Experimental study on the thermal management of an open-cathode air-cooled proton exchange membrane fuel cell stack with ultra-thin metal bipolar plates (2022) (2)
- Effect of engine operating condition on thermodynamic cycle (1997) (2)
- Air-Breathing Membraneless Laminar Flow Fuel Cell With Flow-Through Anode (2011) (1)
- Operation characteristics and performance analysis of integrated power and hybrid cooling systems driven by PEM fuel cell (2023) (1)
- Work Efficiency and Economic Efficiency of Actual Driving Test of Proton Exchange Membrane Fuel Cell Forklift (2022) (1)
- An innovative approach for the fabrication of highly conductive nanocomposites with different carbon (2010) (1)
- Development of a measuring technique for real time particulate emissions from internal combustion engines. (2000) (0)
- Carbon Nanotube‐Based Materials for Fuel Cell Applications (2013) (0)
- Innovative control of ultra-low toxic emissions in the exhaust of internal combustion engines. (2002) (0)
- Heterogeneous Catalytic Conversion of CO2: A Comprehensive Theoretical Review (2015) (0)
- Efficient degradation prediction of PEMFCs using ELM-AE based on fuzzy extension broad learning system (2023) (0)
- Performance of (La, Sr)(Cr, Mn)O3 Anode For Direct Oxidation of Methane in Solid Oxide Fuel Cell (2006) (0)
- Methods for Remit Voltage Reversal of Proton Exchange Membrane Fuel Cells (2022) (0)
- ZIF‐8 derived CeO2‐Fe3O4@Fe‐N/C catalyst for oxygen reduction reaction (2022) (0)
- The economics of power generation and energy storage via Solid Oxide Cell and ammonia (2022) (0)
- Corrigendum to “The economic feasibility study of a 100-MW Power-to-Gas Plant” [44, (38), (2019), 20978–20986]. (2020) (0)
- The Profitability Estimation of a 100 MW Power-to-Gas Plant (2019) (0)
- Design of a novel self-breathing micro fuel cell stack with a silicon membrane based on the demand for portable charging power sources (2023) (0)
- Development of a test facility ot upgrade a con-ventional exhaust gas emission analyser used for transient measurement. (1995) (0)
- Water Management and Performance Enhancement in a Proton Exchange Membrane Fuel Cell System Using 3d-Printed Ejectors (2022) (0)
- FUEL UTILIZATION IN AIR-BREATHING MEMBRANELESS LAMINAR FLOW-BASED FUEL CELL (2011) (0)
- Effects of Molecular Weight and Annealing on Electrical Conductivity of Multi-Walled Carbon Nanotube/Polypropylene Composites (2010) (0)
- Water management in a novel proton exchange membrane fuel cell stack with moisture coil cooling (2022) (0)
- Experimental Study on the Performance Enhancement of an Air-Cooled Open Cathode Proton Exchange Membrane Fuel Cell With Metallic Bipolar Plate (2022) (0)
- Wet-air co-electrolysis in high-temperature solid oxide electrolysis cell for production of ammonia feedstock (2022) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Siew‐hwa Chan?
Siew‐hwa Chan is affiliated with the following schools: