Subra Suresh | Academic Influence

Q: What Schools Are Affiliated With Subra Suresh

Subra Suresh is affiliated with the following schools: Iowa State University, Brown University, Massachusetts Institute of Technology, IIT Madras, Singapore Management University, Nanyang Technological University, Carnegie Mellon University, University of Pittsburgh

Why Is Subra Suresh Influential?

(Suggest an Edit or Addition)

According to Wikipedia, Subra Suresh is an Indian-born American bioengineer, materials scientist, and academic administrator. On 1 January 2018, he was inaugurated as the fourth President of Singapore's Nanyang Technological University , where he is also the inaugural Distinguished University Professor. Subra Suresh plans on stepping down from his role as the President of NTU at the end of 2022. He was the Vannevar Bush Professor of Engineering at the Massachusetts Institute of Technology , and Dean of the School of Engineering at MIT from 2007 to 2010 before being appointed as Director of the National Science Foundation by Barack Obama, where he served from 2010 to 2013. He was the president of Carnegie Mellon University from 2013 to 2017.

(See a Problem?)

Subra Suresh's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Papers

Fatigue of materials (1991) (4254)
Mechanical behavior of nanocrystalline metals and alloys (2003) (1736)
Thin Film Materials: Stress, Defect Formation and Surface Evolution (2004) (1547)
Biomechanics and biophysics of cancer cells. (2007) (1394)
Computational modeling of the forward and reverse problems in instrumented sharp indentation (2001) (1241)
Cell and molecular mechanics of biological materials (2003) (997)
Fundamentals of functionally graded materials (1998) (954)
Size‐Dependent Endocytosis of Nanoparticles (2009) (883)
Connections between single-cell biomechanics and human disease states: gastrointestinal cancer and malaria. (2005) (817)
An experimental and numerical study of deformation in metal-ceramic composites (1989) (721)
A new method for estimating residual stresses by instrumented sharp indentation (1998) (696)
Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins (2005) (694)
DETERMINATION OF ELASTOPLASTIC PROPERTIES BY INSTRUMENTED SHARP INDENTATION (1999) (654)
Deformation of electrodeposited nanocrystalline nickel (2003) (624)
Refractive index maps and membrane dynamics of human red blood cells parasitized by Plasmodium falciparum (2008) (613)
Nano-sized twins induce high rate sensitivity of flow stress in pure copper (2005) (598)
Atomistic mechanisms governing elastic limit and incipient plasticity in crystals (2002) (592)
Fundamentals of metal-matrix composites (1993) (585)
Acoustic separation of circulating tumor cells (2015) (550)
Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel (2003) (537)
Propagation of short fatigue cracks (1984) (528)
Mechanics of the human red blood cell deformed by optical tweezers (2003) (513)
Nanocrystallization During Nanoindentation of a Bulk Amorphous Metal Alloy at Room Temperature (2002) (504)
Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals (2007) (479)
Isolation of exosomes from whole blood by integrating acoustics and microfluidics (2017) (475)
Discrete and continuous deformation during nanoindentation of thin films (2000) (473)
Oxide-Induced Crack Closure: An Explanation for Near-Threshold Corrosion Fatigue Crack Growth Behavior (1981) (463)
Functionally graded metals and metal-ceramic composites: Part 1 Processing (1995) (428)
Strength, strain-rate sensitivity and ductility of copper with nanoscale twins (2006) (426)
Spectrin-level modeling of the cytoskeleton and optical tweezers stretching of the erythrocyte. (2005) (402)
Shape and Biomechanical Characteristics of Human Red Blood Cells in Health and Disease. (2010) (393)
A geometric model for fatigue crack closure induced by fracture surface roughness (1982) (389)
Nanoscale heterogeneity promotes energy dissipation in bone. (2007) (368)
Quantifying the early stages of plasticity through nanoscale experiments and simulations (2003) (368)
Microstructural development in an aluminum alloy-SiC whisker composite (1988) (365)
Deformation of metal-matrix composites with continuous fibers: geometrical effects of fiber distribution and shape (1991) (361)
Cell separation using tilted-angle standing surface acoustic waves (2014) (360)
Three-dimensional manipulation of single cells using surface acoustic waves (2016) (347)
Nano-indentation of copper thin films on silicon substrates (1999) (328)
Metabolic remodeling of the human red blood cell membrane (2010) (326)
Depth-sensing instrumented indentation with dual sharp indenters (2003) (324)
Nonlinear elastic and viscoelastic deformation of the human red blood cell with optical tweezers. (2004) (323)
Study of mechanical deformation in bulk metallic glass through instrumented indentation (2001) (317)
Crack deflection: Implications for the growth of long and short fatigue cracks (1983) (317)
An analysis of the effects of matrix void growth on deformation and ductility in metal-ceramic composites (1991) (311)
The biomechanics toolbox: experimental approaches for living cells and biomolecules (2003) (305)
Fundamentals of functionally graded materials: processing and thermomechanical behaviour of graded metals and metal-ceramic composites (1998) (302)
Grain size effects on the fatigue response of nanocrystalline metals (2003) (301)
Functionally graded metals and metal-ceramic composites: Part 2 Thermomechanical behaviour (1997) (300)
Measuring single-cell density (2011) (274)
THEORY OF INDENTATION OF PIEZOELECTRIC MATERIALS (1999) (269)
Indentation of solids with gradients in elastic properties: Part II. Axisymmetric indentors (1997) (253)
Indentation of solids with gradients in elastic properties: Part I. Point force (1997) (252)
A microfabricated deformability-based flow cytometer with application to malaria. (2011) (250)
Cytoskeletal dynamics of human erythrocyte (2007) (238)
Predictive modeling of nanoindentation-induced homogeneous dislocation nucleation in copper (2004) (234)
Nanoindentation: Simulation of defect nucleation in a crystal (2001) (233)
Some considerations on fatigue crack closure at near-threshold stress intensities due to fracture surface morphology (1982) (232)
Fatigue crack deflection and fracture surface contact: Micromechanical models (1985) (228)
On microstructural evolution and micromechanical modelling of deformation of a whisker-reinforced metal-matrix composite (1989) (227)
Micromechanisms of fatigue crack growth retardation following overloads (1983) (226)
Effect of plasmodial RESA protein on deformability of human red blood cells harboring Plasmodium falciparum (2007) (220)
DETERMINATION OF ELASTO-PLASTIC PROPERTIES BY INSTRUMENTED SHARP INDENTATION: GUIDELINES FOR PROPERTY EXTRACTION (2000) (219)
Molecularly based analysis of deformation of spectrin network and human erythrocyte (2006) (210)
Fatigue behavior of nanocrystalline metals and alloys (2005) (206)
Near-Threshold Fatigue Crack Growth in 2 1/4 Cr-1Mo Pressure Vessel Steel in Air and Hydrogen (1980) (200)
Small and large deformation of thick and thin-film multi-layers: Effects of layer geometry, plasticity and compositional gradients (1996) (200)
Viscoelasticity of the human red blood cell (2006) (200)
Aspects of equivalence between contact mechanics and fracture mechanics: theoretical connections and a life-prediction methodology for fretting-fatigue (1998) (199)
Fatigue crack growth threshold concepts (1984) (194)
Mixed-mode fracture toughness of ceramic materials (1990) (190)
Elastoplastic analysis of thermal cycling: layered materials with compositional gradients (1995) (186)
Spherical indentation of compositionally graded materials: Theory and experiments (1997) (183)
Quantifying the biophysical characteristics of Plasmodium-falciparum-parasitized red blood cells in microcirculation (2010) (173)
Large deformation of living cells using laser traps (2004) (173)
Effects of thermal residual stresses and fiber packing on deformation of metal-matrix composites (1993) (167)
Nanomedicine: elastic clues in cancer detection. (2007) (166)
Fatigue of Materials: Preface to the second edition (1998) (165)
Biomechanics of brain tissue. (2011) (164)
Measurement of residual stress in plasma-sprayed metallic, ceramic and composite coatings (1998) (162)
Lipid bilayer and cytoskeletal interactions in a red blood cell (2013) (162)
Ultralarge elastic deformation of nanoscale diamond (2018) (160)
Protection mechanisms of the iron-plated armor of a deep-sea hydrothermal vent gastropod (2010) (160)
Biomechanics of red blood cells in human spleen and consequences for physiology and disease (2016) (155)
Fracture toughness and fatigue crack growth characteristics of nanotwinned copper (2011) (153)
Accelerated aging in cast Al alloy-SiC particulate composites (1989) (148)
Stresses, curvatures, and shape changes arising from patterned lines on silicon wafers (1996) (143)
Mechanisms of Slow Fatigue Crack Growth in High Strength Aluminum Alloys: Role of Microstructure and Environment (1984) (143)
Fracture normal to a bimaterial interface: Effects of plasticity on crack-tip shielding and amplification (1995) (142)
Stress relaxation and the structure size-dependence of plastic deformation in nanotwinned copper (2009) (138)
Effective plastic response of two-phase composites (1995) (135)
Microscopic and macroscopic aspects of fracture in lithium-containing aluminum alloys (1987) (134)
A comprehensive unit cell model: a study of coupled effects in piezoelectric 1–3 composites (2000) (132)
Statistical Properties of Residual Stresses and Intergranular Fracture in Ceramic Materials (1993) (131)
Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces (1999) (128)
Strain rate sensitivity of Cu with nanoscale twins (2006) (122)
Crack initiation in cyclic compression and its applications (1985) (122)
Hertzian-crack suppression in ceramics with elastic-modulus-graded surfaces (2005) (119)
The growth of a fatigue crack approaching a perpendicularly-oriented, bimaterial interface (1992) (115)
Theory and experiments of fracture in cyclic compression: Single phase ceramics, transforming ceramics and ceramic composites (1988) (115)
Extraction of mechanical properties of materials through deep learning from instrumented indentation (2020) (114)
Coefficients of thermal expansion of metal-matrix composites for electronic packaging (1994) (113)
Multiscale Modeling of Red Blood Cell Mechanics and Blood Flow in Malaria (2011) (111)
Micromechanical modeling of reinforcement fracture in particle-reinforced metal-matrix composites (1994) (109)
Dynamic mechanical response of brain tissue in indentation in vivo, in situ and in vitro. (2011) (109)
Fatigue of Materials: Author index (1998) (108)
Elastoplastic analysis of thermal cycling: Layered materials with sharp interfaces (1994) (107)
Optical measurement of biomechanical properties of individual erythrocytes from a sickle cell patient. (2012) (106)
Host cell deformability is linked to transmission in the human malaria parasite Plasmodium falciparum (2012) (106)
High‐Temperature Failure of an Alumina‐Silicon Carbide Composite under Cyclic loads: Mechanisms of Fatigue Crack‐Tip Damage (1989) (106)
Large deformation and geometric instability of substrates with thin-film deposits (1997) (103)
ON THE INFLUENCE OF ENVIRONMENT ON THE LOAD RATIO DEPENDENCE OF FATIGUE THRESHOLDS IN PRESSURE VESSEL STEEL (1983) (102)
Size effects on the onset of plastic deformation during nanoindentation of thin films and patterned lines (2003) (98)
Combined Simulation and Experimental Study of Large Deformation of Red Blood Cells in Microfluidic Systems (2010) (98)
Self-correction in science at work (2015) (98)
Multiple stiffening effects of nanoscale knobs on human red blood cells infected with Plasmodium falciparum malaria parasite (2015) (98)
Continuous measurements of load-penetration curves with spherical microindenters and the estimation of mechanical properties (1998) (98)
Combined Mode I‐Mode III Fracture of Fatigue‐Precracked Alumina (1987) (98)
Effects of sic content on fatigue crack growth in (1992) (96)
Aluminium-Titanium Diboride (Al-TiB2) Metal Matrix Composites: Challenges and Opportunities (2012) (95)
Gradients in elastic modulus for improved contact-damage resistance. Part I: The silicon nitride–oxynitride glass system (2001) (94)
Effects of SiC reinforcement and aging treatment on fatigue crack growth in an AlSiC composite (1988) (94)
Static and dynamic light scattering of healthy and malaria-parasite invaded red blood cells. (2010) (93)
An experimental and numerical study of cyclic deformation in metal-matrix composites (1992) (93)
Biophysics of Malarial Parasite Exit from Infected Erythrocytes (2011) (92)
Mechanical response of human red blood cells in health and disease: Some structure-property-function relationships (2006) (91)
NEAR-THRESHOLD FATIGUE CRACK PROPAGATION: A PERSPECTIVE ON THE ROLE OF CRACK CLOSURE (1983) (89)
Plastic near-tip fields for branched cracks (1986) (89)
Circulating Tumor Cell Phenotyping via High-Throughput Acoustic Separation. (2018) (89)
Plasticity effects on fracture normal to interfaces with homogeneous and graded compositions (1997) (86)
Mechanics of indentation of plastically graded materials—I: Analysis (2008) (85)
Mechanistic dissimilarities between environmentally influenced fatigue-crack propagation at near-threshold and higher growth rates in lower strength steels (1982) (85)
Influence of corrosion deposits on near-threshold fatigue crack growth behavior in 2xxx and 7xxx series aluminum alloys (1982) (83)
Formation and size distribution of self-assembled vesicles (2017) (83)
Effects of mechanical properties and surface friction on elasto-plastic sliding contact (2008) (81)
Electric impedance microflow cytometry for characterization of cell disease states. (2013) (81)
Fatigue crack propagation in dual-phase steels: Effects of ferritic-martensitic microstructures on crack path morphology (1984) (81)
Determination of processing-induced stresses and properties of layered and graded coatings: Experimental method and results for plasma-sprayed NiAl2O3 (1997) (80)
Shell buckling of individual multiwalled carbon nanotubes using nanoindentation (2005) (80)
Kinetics of sickle cell biorheology and implications for painful vasoocclusive crisis (2015) (79)
Dynamic fatigue crack growth in polycrystalline alumina under cyclic compression (1986) (78)
Biomechanics of single cortical neurons. (2010) (77)
Computational Biorheology of Human Blood Flow in Health and Disease (2013) (76)
Mineral Surface Control of Organic Carbon in Black Shale (2002) (74)
Quantitative Biomechanics of Healthy and Diseased Human Red Blood Cells using Dielectrophoresis in a Microfluidic System. (2014) (71)
Plastic deformation of continuous fiber-reinforced metal-matrix composites: Effects of fiber shape and distribution (1990) (70)
The frictional sliding response of elasto-plastic materials in contact with a conical indenter (2007) (70)
A unified mechanistic model for size-dependent deformation in nanocrystalline and nanotwinned metals (2011) (70)
Gradients in elastic modulus for improved contact-damage resistance. Part II : The silicon nitride-silicon carbide system (2001) (68)
Model experiments for direct visualization of grain boundary deformation in nanocrystalline metals (2003) (68)
Cyclic strain hardening of nanocrystalline nickel (2006) (67)
Nanostructured Al–Fe alloys produced by e-beam deposition: static and dynamic tensile properties (2003) (67)
AN EXPERIMENTAL STUDY OF SPHERICAL INDENTATION ON PIEZOELECTRIC MATERIALS (1999) (67)
Pf155/RESA protein influences the dynamic microcirculatory behavior of ring-stage Plasmodium falciparum infected red blood cells (2012) (67)
Three-dimensional model of strength and ductility of polycrystalline copper containing nanoscale twins (2008) (66)
Size effects on the mechanical properties of thin polycrystalline metal films on substrates (2002) (66)
Human natural killer cells control Plasmodium falciparum infection by eliminating infected red blood cells (2014) (65)
Mechanics of diseased red blood cells in human spleen and consequences for hereditary blood disorders (2018) (64)
Curvature changes during thermal cycling of a compositionally graded NiAl2O3 multi-layered material (1996) (63)
An experimental investigation of fretting fatigue in Ti-6Al-4V: the role of contact conditions and microstructure (2001) (63)
Materials science: Deformation of the ultra-strong (2008) (63)
Deep elastic strain engineering of bandgap through machine learning (2019) (62)
Spherical indentation of composite laminates with controlled gradients in elastic anisotropy (1998) (62)
Mechanics of indentation of plastically graded materials—II: Experiments on nanocrystalline alloys with grain size gradients (2008) (62)
Electrical response during indentation of piezoelectric materials: A new method for material characterization (1999) (62)
A three-dimensional analysis of fretting fatigue (1998) (60)
Microstructural evolution in passivated Al films on Si substrates during thermal cycling (2002) (59)
Elasto-plastic deformation of compositionally graded metal-ceramic composites (1997) (59)
STRESS EVOLUTION IN PASSIVATED THIN FILMS OF CU ON SILICA SUBSTRATES (1998) (57)
Some considerations on the modelling of oxide-induced fatigue crack closure using solutions for a rigid wedge inside a linear elastic crack (1983) (57)
Fatigue cracking in materials with brittle surface coatings (1993) (56)
Analysis of the impact of a sharp indenter (2002) (56)
Modeling and design of multi-layered and graded materials (1997) (56)
Real-time, high-resolution study of nanocrystallization and fatigue cracking in a cyclically strained metallic glass (2013) (55)
Constitutive behavior of a microcracking brittle solid in cyclic compression (1987) (55)
Improved fatigue resistance of gradient nanograined Cu (2019) (55)
Thermal cycling and stress relaxation response of Si-Al and Si-Al-SiO2 layered thin films (1995) (55)
Measurement of full-field curvature and geometrical instability of thin film-substrate systems through CGS interferometry (2003) (54)
Elastic criterion for dislocation nucleation (2004) (53)
The influence of chromium addition on the toughness of γ-Niα-Al2O3 interfaces (1997) (53)
An analysis of ductile failure by grain boundary void growth (1989) (53)
Growth of cracks under far-field cyclic compressive loads: numerical and experimental results (1986) (52)
Crack growth retardation due to micro-roughness: A mechanism for overload effects in fatigue (1982) (52)
Differential growth and shape formation in plant organs (2018) (51)
Evolution of stresses in passivated and unpassivated metal interconnects (1998) (51)
Dynamic indentation for determining the strain rate sensitivity of metals (2003) (50)
Patient-specific blood rheology in sickle-cell anaemia (2016) (49)
Tensile Fracture Toughness of Ceramic Materials: Effects of Dynamic Loading and Elevated Temperatures (1990) (49)
Effects of grain refinement and strength on friction and damage evolution under repeated sliding contact in nanostructured metals (2005) (49)
Elevated-temperature crack growth in polycrystalline alumina under static and cyclic loads (1992) (48)
Instrumented spherical micro-indentation of plasma-sprayed coatings (2001) (48)
High‐Temperature Crack Growth in Monolithic and SiCw‐Reinforced Silicon Nitride under Static and Cyclic Loads (1994) (47)
Steady-state frictional sliding contact on surfaces of plastically graded materials (2009) (47)
Effects of reinforcement orientation on the tensile response of metal-matrix composites (1995) (46)
Febrile temperature leads to significant stiffening of Plasmodium falciparum parasitized erythrocytes. (2009) (45)
Analysis of average thermal stresses in passivated metal interconnects (1999) (45)
The role of adhesion in contact fatigue (1999) (45)
Mechanical and electrical responses of piezoelectric solids to conical indentation (2000) (45)
Steady-state creep of metal-ceramic multilayered materials (1996) (44)
The fracture mechanics similitude concept: questions concerning its application to the behavior of short fatigue cracks (1983) (44)
Fatigue crack growth behavior of aluminum alloy 2020 (AlCuLiMnCd) (1984) (44)
Moving Toward Global Science (2011) (44)
Effects of line and passivation geometry on curvature evolution during processing and thermal cycling in copper interconnect lines (2000) (44)
Thermoelastic analysis of periodic thin lines deposited on a substrate (1999) (43)
Sliding of coherent twin boundaries (2017) (43)
Anisotropic light scattering of individual sickle red blood cells. (2012) (42)
Elastoplastic analysis of thermal cycling: Ceramic particles in a metallic matrix (1995) (42)
Cyclic compressive loading results in fatigue cracks in ultra high molecular weight polyethylene (1995) (41)
Deformation, structural changes and damage evolution in nanotwinned copper under repeated frictional contact sliding (2011) (41)
Fracture toughness measurements in ceramics: Pre-cracking in cyclic compression (1987) (41)
Simultaneous polymerization and adhesion under hypoxia in sickle cell disease (2018) (41)
Crack growth in transforming ceramics under cyclic tensile loads (1989) (41)
Crack initiation under far-field cyclic compression and the study of short fatigue cracks (1986) (40)
Microstructural effects on quasi-static fracture mechanisms in AlLi alloys: the role of crack geometry (1985) (40)
Fatigue crack propagation in oil environments—I. Crack growth behavior in silicone and paraffin oils (1985) (40)
Actuation and locomotion driven by moisture in paper made with natural pollen (2020) (39)
Small molecule targeting malaria merozoite surface protein-1 (MSP-1) prevents host invasion of divergent plasmodial species. (2014) (39)
Influence of plastic deformation on hydrogen transport in 2 14 Cr-1Mo steel (1982) (38)
Nanoindentation of patterned metal lines on a Si substrate (2003) (37)
Research funding: Global challenges need global solutions (2012) (37)
Mode III fracture of 4340 steel: Effects of tempering temperature and fracture surface interference (1988) (37)
Fatigue crack growth at arbitrary angles to bimaterial interfaces (1995) (37)
Cellular normoxic biophysical markers of hydroxyurea treatment in sickle cell disease (2016) (37)
Cyclic deformation leads to defect healing and strengthening of small-volume metal crystals (2015) (36)
Fracture of Si3N4–SiC Whisker Composites under Cyclic Loads (1988) (35)
Fatigue crack propagation along polymer-metal interfaces in microelectronic packages (1997) (35)
Stepwise-Graded Si3N4–SiC Ceramics with Improved Wear Properties (2002) (35)
The bauschinger effect in whisker-reinforced metal-matrix composites (1990) (35)
Elastoplastic deformation of multilayered materials during thermal cycling (1995) (34)
Reprint of: Connections between single-cell biomechanics and human disease states: gastrointestinal cancer and malaria. (2015) (34)
Micromechanisms of Creep–Fatigue Crack Growth in a Silicide‐Matrix Composite with SiC Particles (1993) (33)
Dynamic observation of Al thin films plastically strained in a TEM (2001) (33)
Mechanics and micromechanisms of fatigue crack growth in brittle solids (1990) (33)
ON THE INFLUENCE OF FATIGUE UNDERLOADS ON CYCLIC CRACK GROWTH AT LOW STRESS INTENSITIES (1981) (33)
Transformation of hard pollen into soft matter (2020) (32)
An experimental study of toughening and degradation due to microcracking in a ceramic composite (1992) (32)
An Experimental Investigation of Fretting Fatigue with Spherical Contact in 7075-T6 Aluminum Alloy (2000) (32)
Electrical response during indentation of a 1-3 piezoelectric ceramic-polymer composite (1999) (31)
Mechanics of the human red blood cell deformed by optical tweezers [Journal of the Mechanics and Physics of Solids, 51 (2003) 2259-2280] (2005) (31)
Application of a fracture mechanics based life prediction method for contact fatigue (2004) (30)
Artificial intelligence velocimetry and microaneurysm-on-a-chip for three-dimensional analysis of blood flow in physiology and disease (2021) (30)
Analyses of internal structures and defects in materials using physics-informed neural networks (2022) (29)
Lithium-containing aluminum alloys: cyclic fracture (1985) (29)
Load Interaction Effects on Compression Fatigue Crack Growth in Ductile Solids (1988) (29)
Transformation‐Toughened Ceramic Multilayers with Compositional Gradients (2005) (28)
An experimental study of the dynamic mechanical properties of an AlSiCw composite (1988) (28)
Cytoadherence of erythrocytes invaded by Plasmodium falciparum: quantitative contact-probing of a human malaria receptor. (2013) (28)
Colloid model for atoms (2006) (27)
A new method for evaluating the plastic properties of materials through instrumented frictional sliding tests (2010) (26)
Thin Film Materials: Stress in anisotropic and patterned films (2004) (26)
Room temperature fatigue crack growth in cemented carbides (1986) (25)
Interface cracks in layered materials subjected to a uniform temperature change (2001) (24)
Metallization of diamond (2020) (24)
Laser linking of metal interconnects: analysis and design considerations (1996) (24)
A theory for creep by interfacial flaw growth in ceramics and ceramic composites (1990) (23)
Mechanics and Physics of the Growth of Small Cracks (1983) (23)
Analysis of size-dependent slip transfer and inter-twin flow stress in a nanotwinned fcc metal (2014) (23)
Cyclic stress fields for fatigue cracks in amorphous solids : experimental measurements and their implications (1993) (22)
THE EFFECT OF ENVIRONMENT ON FATIGUE CRACK GROWTH BEHAVIOR OF 2021 ALUMINUM ALLOY (1982) (21)
De Novo Generated Human Red Blood Cells in Humanized Mice Support Plasmodium falciparum Infection (2015) (21)
An analysis of dynamic fracture in microcracking brittle solids (1988) (20)
Further remarks on the micromechanisms of fatigue crack growth retardation following overloads (1985) (20)
Fatigue crack deflection and fracture surface contact: Micromechanical models (1985) (20)
Effect of SiC content on fatigue crack growth in aluminum alloys reinforced with SiC particles (1992) (20)
Chapter 13 – Matrix, Reinforcement, and Interfacial Failure (1993) (20)
Corrigendum to “Large deformation of living cells using laser traps” [Acta Materialia 52 (2004) 1837–1845] (2004) (19)
Chapter 7 – Aging Characteristics of Reinforced Metals (1993) (19)
A Method for Dynamic Fracture Initiation Testing of Ceramics (1988) (18)
Patient-specific modeling of individual sickle cell behavior under transient hypoxia (2017) (18)
Circulating Tumor Cell Phenotyping via High-Throughput Acoustic Separation. (2018) (18)
Mechanical fatigue of human red blood cells (2019) (18)
Controlled molecular self-assembly of complex three-dimensional structures in soft materials (2017) (18)
Fatigue crack growth in polymers subjected to fully compressive cyclic loads (1992) (18)
Cyclic near-tip fields for fatigue cracks along metal-metal and metal-ceramic interfaces (1993) (18)
Simulations of cyclic normal indentation of crystal surfaces using the bubble-raft model (2002) (17)
Size-Dependent Endocytosis of Nanoparticles M U By (2009) (17)
Thin Film Materials: Film stress and substrate curvature (2004) (17)
Fatigue of Materials: References (1998) (17)
Effects of sulfur on the fatigue and fracture resistance of interfaces between γ-Ni(Cr) and α-Al2O3 (2000) (17)
Cyclic stress fields ahead of tension fatigue cracks in amorphous polymers (1994) (16)
Microstructural effects on ambient and elevated temperature fatigue crack growth in titanium aluminide intermetallics (1991) (16)
Applications of Fracture Mechanics in Fretting Fatigue Life Assessment (2000) (16)
Effects of residual stresses in fracture toughness testing of hard metals (1988) (16)
Repeated frictional sliding properties of copper containing nanoscale twins (2012) (14)
Transient crack-tip fields for mixed-mode power law creep (1991) (14)
In situ transmission electron microscopy investigation of threading dislocation motion in passivated thin aluminum films (1999) (14)
Machine learning for deep elastic strain engineering of semiconductor electronic band structure and effective mass (2021) (14)
On the relationship between crack initiation toughness and crack growth toughness (1986) (14)
Recommendations on modeling polyphase plasticity : conclusions of panel discussions (1994) (14)
Biomechanics of the human chorioamnion (2006) (13)
Crystallographic effects on the fatigue fracture of copper-sapphire interfaces (2000) (13)
Surface film technique for crack length measurement in nonconductive brittle materials: Calibration and evaluation (1991) (13)
Issues in the finite element modeling of polyphase plasticity (1994) (13)
Effect of Carbon Addition on Elevated Temperature Crack Growth Resistance in (Mo,W)Si2–SiCp Composite (1994) (12)
Fracture and Fatigue Characteristics in Aluminum Alloys (1989) (12)
Combined mode I-mode II and mode I-mode III fracture of brittle materials (1991) (12)
Large deformation of thin films and layered flat panels : Effects of gravity (2001) (11)
Crack initiation and growth under far-field cyclic compression: theory, experiments and applications (1986) (10)
The failure of hard materials in cyclic compression: Theory, experiments and applications (1988) (10)
Grain morphology, texture, and microhardness gradients in aluminum diffusion-bonded to aluminum oxide (1999) (10)
Cultivating Global Science (2012) (10)
The Power of Many Minds (2013) (10)
The Effect of Superposed Hydrostatic Stress on the Mechanical Response of Metal-Matrix Composites (1991) (9)
Fatigue crack growth in cementitious materials under cyclic compressive loads (1989) (9)
Pf 155 / RESA protein influences the dynamic microcirculatory behavior of ring-stage Plasmodium falciparum infected red blood cells (2012) (9)
Continuous force-displacement relationships for the human red blood cell at different erythrocytic developmental stages of Plasmodium falciparum malaria parasite (2004) (8)
Effects of anisotropy and slip geometry on fatigue fracture of Cu/sapphire bicrystals (2001) (8)
Fatigue crack growth in unidirectional graphite-epoxy composites under cyclic compression (1992) (8)
Chapter 10 – Continuum Models for Deformation: Metals Reinforced with Continuous Fibers (1993) (8)
Fatigue crack nucleation in metallic materials (1999) (7)
On the contrast between mode I and mode III fatigue crack propagation under variable-amplitude loading conditions (1983) (7)
Torsional fracture of fatigue pre-cracked ceramic rods (1987) (7)
Measurement of Residual Stress in Plasma-Sprayed Composite Coatings with Graded and Uniform Compositions (1999) (7)
Tensile fracture toughness measurements in ceramics (1987) (7)
Fatigue of Materials: Fatigue crack initiation in ductile solids (1998) (7)
Digital printing of shape-morphing natural materials (2021) (6)
Simulation of the Elasto–Plastic Deformations in Compositionally Graded Metal–Ceramic Structures: Mean–Field and Unit Cell Approaches* (1997) (6)
Mixed-mode inelastic crack-tip fields: Homogeneous solids and bimaterial interfaces (1991) (6)
Materials Education for the New Century (2001) (6)
Biomechanics and biophysics of cancer cells q (2007) (6)
Fatigue of Materials: Fatigue crack growth in brittle solids (1998) (6)
Some Practical Issues of Curvature and Thermal Stress in Realistic Multilevel Metal Interconnect Structures (2008) (6)
Fatigue Crack Propagation Behavior of 2¼Cr-1Mo Steels for Thick-Wall Pressure Vessels (1982) (5)
Preface to the Millennium Special Issue (2000) (5)
Computational Modeling of the Micropipette Aspiration of Malaria Infected Erythrocytes (2009) (5)
Simulation of nanoindentation via interatomic potential finite element method (2003) (4)
FATIGUE CRACK PROPAGATION IN VISCOUS ENVIRONMENTS (1984) (4)
Effects of Crack Flank Oxide Debris and Fracture Surface Roughness on Near-Threshold Corrosion Fatigue (1983) (4)
Fatigue of Materials: Introduction and overview (1998) (4)
Integrating Technology and Medicine For a Healthier Tomorrow (2011) (4)
Fatigue of Materials: Cyclic deformation and crack initiation in noncrystalline solids (1998) (4)
Fatigue of Materials: Small fatigue cracks (1998) (4)
Forming of Ceramics during Firing without the Application of External Pressure (2004) (4)
Research Universities, Innovation, and Growth (2015) (3)
INFLUENCES OF GASEOUS ENVIRONMENT ON LOW GROWTH-RATE FATIGUE CRACK PROPAGATION IN STEELS (1981) (3)
Cyclic Deformation and Fatigue (2006) (3)
Fatigue of Materials: Fatigue crack growth in ductile solids (1998) (3)
Comparison of environmentally-influenced near-threshold fatigue-crack-growth behavior in high- and lower-strength steels at conventional frequencies (1982) (3)
Onset of plastic yielding in thin metal lines deposited on substrates (1999) (3)
Environmental interactions: corrosion-fatigue and creep-fatigue (1998) (3)
Processing-Induced Stresses And Curvature In Patterned Lines On Silicon Wafers (1996) (3)
Fatigue of Materials: Cyclic deformation in ductile single crystals (1998) (3)
The influence of solid-state and liquid-phase bonding on fatigue at Al/Al2O3 interfaces (1999) (3)
Mechanical Loading of Neurons and Astrocytes with Application to Blast Traumatic Brain Injury (2010) (3)
Supplementary Information : Nanoscale heterogeneity promotes energy dissipation in bone (2007) (2)
Elevated-temperature crack growth in polycrystalline alumina under static and cyclic loads (1992) (2)
Fatigue of Materials: Appendix (1998) (2)
Optimization of Blanks for Sheet Metal Forming (2005) (2)
Environmentally Affected Near-Threshold Fatigue Crack Growth in Steels (1983) (2)
Fatigue crack growth behavior of a titanium aluminide intermetallic (1989) (2)
High-Cycle Fatigue and Time-Dependent Failure in Metallic Alloys for Propulsion Systems (2002) (2)
Mechanical Response of Rat Cortical Neurons: AFM Indentations and Preliminary Modeling (2009) (2)
The influence of solid-state and liquid-phase bonding on fatigue at Al/Al2O3 interfaces (1999) (2)
CLOSURE MECHANISMS FOR THE INFLUENCE OF LOAD RATIO ON FATIGUE CRACK PROPAGATION IN STEELS (1982) (2)
Fatigue of Materials: Fatigue crack growth in noncrystalline solids (1998) (2)
Indentation of Piezoelectric Ceramics: Theory, Experiments and Applications (1999) (2)
Fatigue of Materials: Stress–life approach (1998) (2)
Research Universities, Innovation, and Growth: IRI Medal Address: In This Article Adapted from His 2015 IRI Medal Address, Subra Suresh Describes How Universities Power Innovation and Spur Economic Growth (2015) (2)
Fatigue of Materials: Strain–life approach (1998) (2)
Mechanisms of environmentally influenced fatigue crack growth in lower strength steels (1981) (2)
Delamination and fracture (2004) (2)
Modeling and experimental studies on fretting fatigue (1999) (2)
Cyclic contact deformation of nanocrystalline Ni (2006) (2)
Steady-State Creep of Thick and Thin-Film Multilayers (1995) (2)
Fatigue of Materials: Contact fatigue: sliding, rolling and fretting (1998) (2)
Comparison of Optical Strain Analysis and Circular Grid Analysis in Sheet Metal Forming (2007) (1)
Fracture mechanics and its implications for fatigue (1998) (1)
Fatigue of Materials: Cyclic deformation and crack initiation in brittle solids (1998) (1)
Thin Film Materials: Introduction and Overview (2004) (1)
Static and dynamic light scattering of healthy and malaria-parasite blood cells (2010) (1)
High temperature crack growth in unreinforced and whisker-reinforced ceramics under cyclic loads (1995) (1)
A MODEL FOR THE CONTRIBUTION TO PLASTICITY-INDUCED FATIGUE CRACK CLOSURE FROM RESIDUAL COMPRESSIVE STRESSES (1982) (1)
Thin Film Materials: Dislocation interactions and strain relaxation (2004) (1)
Failure Mode Interaction in Metal-Matrix Composites (1996) (1)
FATIGUE CRACK BEHAVIOR OF ULTRA FINE GRAIN PURE METALS PRODUCED VIA SEVERE PLASTIC DEFORMATION (2008) (1)
Pathophysiology of human red blood cell probed by quantitative phase microscopy (2010) (1)
Cyclic damage zones ahead of tensile fatigue cracks in ceramic materials (1989) (1)
Fatigue of Materials: Retardation and transients in fatigue crack growth (1998) (1)
Passivated Interconnect Lines: Thermomechanical Analysis and Curvature Measurements (1999) (1)
Addendum: “A Method for Dynamic Fracture Initiation Testing of Ceramics” (Journal of Engineering Materials and Technology, 1988, 110, pp. 325–331) (1989) (1)
Shape and Biomechanicalof Human Red Blood Cells in Health and Disease (2010) (1)
Comment: Basic research generates jobs and competitiveness (2011) (1)
Perspectives for the Inaugural Issue (2014) (1)
Thin Film Materials: Equilibrium and stability of surfaces (2004) (1)
Optical Strain Measurement- Experimental Tool for Validating Sheet Metal Forming Analysis (2006) (1)
FATIGUE OF NANOSTRUCTURED METALS AND ALLOYS (2004) (1)
Deformation of a Meta-Ceramic Composite with a Crystal Matrix: Reinforcement Distribution Effects (1992) (0)
Thin Film Materials: Dislocation formation in epitaxial systems (2004) (0)
Modulating electronic properties of semiconductor materials at large mechanical deformation (2021) (0)
Defect Nucleation: Predictions through Nanoscale Experiments and Computations (2004) (0)
Fatigue of Materials: Cyclic deformation in polycrystalline ductile solids (1998) (0)
FATIGUE CRACK GROWTH IN CEMENTITIOUS SOLIDS UNDER CYCLIC COMPRESSION: THEORY AND EXPERIMENTS. FRACTURE OF CONCRETE AND ROCK: RECENT DEVELOPMENTS. PAPERS PRESENTED AT THE INTERNATIONAL CONFERENCE, UNIVERSITY OF WALES, COLLEGE OF CARDIFF, SCHOOL OF ENGINEERING, SEPTEMBER 20-22, 1989 (1989) (0)
CORRECTION (1992) (0)
Diamond can turn flexible when made into ultrafine needles , researchers find (2018) (0)
Correction for Shi et al., Deep elastic strain engineering of bandgap through machine learning (2020) (0)
4414 - FATIGUE OF NANOSTRUCTURED METALS AND ALLOYS (2013) (0)
Tumor Cell Phenotyping: Circulating Tumor Cell Phenotyping via High-Throughput Acoustic Separation (Small 32/2018) (2018) (0)
Introduction to the viewpoint set on mixed-mode fracture (1991) (0)
Fundamental Studies of Novel Contact-Damage Resistant Ceramics (2003) (0)
Thin Film Materials: Film buckling, bulging and peeling (2004) (0)
Characterizing Cell Mechanics with AFM and Microfluidics (2007) (0)
MIT-ONR Workshop Covers Functionally Graded Structural Materials (1995) (0)
Supplementary Materials for Ultralarge elastic deformation of nanoscale diamond (2018) (0)
Fatigue of Polymers and Organic Composites. (1993) (0)
Linking Interfacial Plasticity to Ductility : A Modeling Framework for Nanostructured Metals (2006) (0)
Thin Film Materials: Preface (2004) (0)
Anisotropic Design of Multilayered Exoskeletons in Biology (2008) (0)
Evaluation of Polymers as Lubricants in the Extrusion of Aluminum (1982) (0)
Deep Bandgap and Band Structure Engineering by Machine Learning (2019) (0)
Fatigue Crack Growth in Ceramics and Ceramic Composites at High Temperatures (1995) (0)
HIGH-CYCLE FATIGUE AND TIME-DEPENDENT FAILURE IN METALLIC ALLOYS FOR PROPULSION SYSTEMS AFOSR F 49620-96-1-0478 (2000) (0)
Constitutive model development of fetal membrane mechanics: Mechanical testing and numerical simulation (2005) (0)
Lawrence Berkeley National Laboratory Recent Work Title NEAR-THRESHOLD FATIGUE CRACK PROPAGATION : A PERSPECTIVE ON THE ROLE OF CRACK CLOSURE Permalink (2013) (0)
Ambient and elevated temperature fatigue crack growth in ceramics and ceramic composites (2013) (0)
Profile of Subra Suresh (2020) (0)
Lawrence Berkeley National Laboratory Recent Work Title CRACK GROWTH RETARDATION DUE TO MICRO-ROUGHNESS : A MECHANISM FOR OVERLOAD EFFECTS IN FATIGUE Permalink (2012) (0)
Closure to “Discussion of ‘A Method for Dynamic Fracture Initiation Testing of Ceramics’” (1991, ASME J. Eng. Mater. Technol., 113, pp. 183–185) (1991) (0)
Closure to “Discussion of ‘Evaluation of Polymers as Lubricants in the Extrusion of Aluminum’” (1982, ASME J. Lubr. Technol., 104, p. 557) (1982) (0)
The role of stress in mass transport (2004) (0)
Microstructural effects on fatigue crack growth of titanium aluminides (1990) (0)
Fatigue crack growth threshold concepts : proceedings of the International Symposium on Fatigue Crack Growth Threshold Concepts (1984) (0)
Cellular biophysical markers of hydroxyurea treatment in sickle cell disease (2017) (0)
Cell mechanics and human disease states (2006) (0)
Mechanics of Crack‐Tip Damage During Static and Cyclic Crack Growth in Ceramic Composites at Elevated Temperatures (2008) (0)
5177 - EXPLICIT EXPRESSION FOR STRESS IN MULTI-LEVEL LINE STRUCTURES AND IN CONNECTING VERTICAL VIAS (2013) (0)
Lawrence Berkeley National Laboratory Recent Work Title FATIGUE CRACK PROPAGATION IN OIL ENVIRONMENTS : PART I : CRACK GROWTH BEHAVIOR IN SILICONE AND PARAFFIN OILS Permalink (2012) (0)
Mechanisms of environmentally-assisted fatigue crack growth in low strength steels (2013) (0)
Theory and experiments of fracture in cyclic compression: Single phase ceramics, transforming ceramics and ceramic composites: Annual report for the period ending July 31, 1987 (1987) (0)
In vitro nanomechanical studies have shown that cultured cancer cells are elastically softer than healthy ones, and new measurements on cells from cancer patients suggest that this mechanical signature may be a powerful way to detect cancer in the clinic. (2007) (0)
Lawrence Berkeley National Laboratory Recent Work Title SOME CONSIDERATIONS ON FATIGUE CRACK CLOSURE AT NEAR-THRESHOLD STRESS INTENSITIES DUE TO FRACTURE SURFACE MORPHOLOGY Permalink (2012) (0)
Static pile load test inversion (2019) (0)
Nanomechanics and Micromechanics of Thin Films, Graded Coatings, and Mechanical/Nonmechanical Systems (2001) (0)
Mechanical Properties of Bio-Inspired and Biological Materials November 29-December 2 , 2004 Chairs (2004) (0)
inklng of eta1 Interconnects: alysis and esign Consideratio (1996) (0)
GUE CRACK BEHAVIOR OF ULTRA FINE GRAIN PURE METALS PRODUCED VIA SEVERE PLASTIC DEFORMATION (2007) (0)
5073 - EXTRACTING MECHANICAL PROPERTIES USING REVERSE ANALYSIS OF SINGLE AND DUAL SHARP INDENTATION (2013) (0)
Large Deformation of Biological Cells by Optical Tweezers (2003) (0)
Thin Film Materials: References (2004) (0)
An Experimental Study of the Dynamic Mechanical Properties of an Al-SiC(W) Composite, (1986) (0)
Fatigue resistance and microstructure of experimental dual phase Fe/2Si/0. 1C steel (1983) (0)
Contact fatigue of nanocrystalline metals using instrumented indentation (2005) (0)
Creativity of Same-Discipline Interactions 2 (2012) (0)
U.S. science policy. Suresh expects low-cost ideas will mean a big payoff for NSF. Interview by Jeffrey Mervis. (2011) (0)
Newsmaker interview: Subra Suresh. A world of changes prepares Subra Suresh to tackle change at NSF. (2010) (0)
Merit comes first. Interview by Eric Hand. (2011) (0)
Investigation of Human Diseases at the Intersections of Engineering, Natural Sciences and Medicine (2011) (0)
Prebiotic, Probiotic and Synbiotic Food Information Resources on the Cyberspace: A Study (2007) (0)
QnAs with Subra Suresh. Interview by Prashant Nair. (2012) (0)
Business backs the basics (2016) (0)

This paper list is powered by the following services:

Other Resources About Subra Suresh

en.wikipedia.org

What Schools Are Affiliated With Subra Suresh?

Subra Suresh is affiliated with the following schools: