Tatsuki Ohji
#166,372
Most Influential Person Now
Researcher
Tatsuki Ohji's AcademicInfluence.com Rankings
Tatsuki Ohjiengineering Degrees
Engineering
#7376
World Rank
#8746
Historical Rank
Materials Science
#449
World Rank
#454
Historical Rank

Download Badge
Engineering
Tatsuki Ohji's Degrees
- PhD Materials Science University of Tokyo
- Masters Materials Science University of Tokyo
- Bachelors Materials Science University of Tokyo
Why Is Tatsuki Ohji Influential?
(Suggest an Edit or Addition)Tatsuki Ohji's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Macro-porous ceramics: processing and properties (2012) (478)
- Synthesis of Porous Ceramics with Complex Pore Structure by Freeze‐Dry Processing (2001) (375)
- Reactive Hot Pressing of ZrB2–SiC Composites (2004) (244)
- Formation and photocatalytic application of ZnO nanotubes using aqueous solution. (2010) (243)
- Synthesis of Porous Silicon Nitride with Unidirectionally Aligned Channels Using Freeze‐Drying Process (2002) (234)
- Strengthening and Toughening Mechanisms of Ceramic Nanocomposites (2005) (232)
- Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process (2001) (201)
- Fabrication and characterization of highly porous mullite ceramics (2003) (160)
- Microstructure and Mechanical Properties of Porous Alumina Ceramics Fabricated by the Decomposition of Aluminum Hydroxide (2001) (158)
- Oxidation bonding of porous silicon carbide ceramics (2002) (150)
- Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive (2003) (144)
- Microstructure and Mechanical Properties of Silicon Nitride Ceramics with Controlled Porosity (2002) (122)
- Tensile Creep Behavior of Alumina/Silicon Carbide Nanocomposite (1994) (120)
- High‐Surface‐Area Alumina Ceramics Fabricated by the Decomposition of Al(OH)3 (2001) (119)
- Boron carbide and nitride as reactants for in situ synthesis of boride-containing ceramic composites (2004) (113)
- High‐Strength Porous Silicon Carbide Ceramics by an Oxidation‐Bonding Technique (2004) (109)
- Influence of Yttria–Alumina Content on Sintering Behavior and Microstructure of Silicon Nitride Ceramics (2004) (106)
- Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores (2004) (105)
- Particle/Matrix Interface and Its Role in Creep Inhibition in Alumina/Silicon Carbide Nanocomposites (1996) (105)
- Thermal Shock Behavior of Porous Silicon Carbide Ceramics (2002) (105)
- Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering (2002) (101)
- Fabrication and properties of ultra highly porous silicon carbide by the gelation–freezing method (2010) (98)
- Reinforcement by crack-tip blunting in porous ceramics (2004) (92)
- Effect of Sintering Additives on Microstructure and Mechanical Properties of Porous Silicon Nitride Ceramics (2006) (88)
- Chemical Reactions, Anisotropic Grain Growth and Sintering Mechanisms of Self‐Reinforced ZrB2–SiC Doped with WC (2011) (87)
- Fracture Resistance Behavior of Highly Anisotropic Silicon Nitride (1995) (81)
- Strengthening of Porous Alumina by Pulse Electric Current Sintering and Nanocomposite Processing (2004) (79)
- Development of high-thermal-conductivity silicon nitride ceramics (2015) (78)
- Development of Oxide-Based EBC for Silicon Nitride (2005) (75)
- Porous Silicon Nitride Ceramics Prepared by Reduction–Nitridation of Silica (2005) (74)
- High performance porous silicon nitrides (2002) (73)
- Fabrication of Low-Shrinkage, Porous Silicon Nitride Ceramics by Addition of a Small Amount of Carbon (2004) (72)
- Comparison of Mechanical Properties of Silicon Nitrides with Controlled Porosities Produced by Different Fabrication Routes (2005) (70)
- Nonoxide–boron nitride composites: in situ synthesis, microstructure and properties (2002) (68)
- Porosity and microstructure control of porous ceramics by partial hot pressing (2001) (68)
- Synthesis of fibrous β-Si3N4 structured porous ceramics using carbothermal nitridation of silica (2005) (68)
- Recession Behavior of Yb2Si2O7 Phase Under High Speed Steam Jet at High Temperatures (2008) (68)
- Microstructural design and mechanical properties of porous silicon nitride ceramics (2008) (66)
- Oxidation bonding of porous silicon carbide ceramics with synergistic performance (2004) (61)
- Rapid Rate Sintering of Nano-grained ZrO2-based Composites Using Pulse Electric Current Sintering Method (1998) (60)
- Superplastic Sinter-Forging of Silicon Nitride with Anisotropic Microstructure Formation (1999) (60)
- Thermal Shock Behavior of Isotropic and Anisotropic Porous Silicon Nitride (2003) (60)
- Fracture Energy of an Aligned Porous Silicon Nitride (2004) (57)
- In Situ Reaction Synthesis of Silicon Carbide–Boron Nitride Composites (2004) (56)
- New Uniformly Porous CaZrO3/MgO Composites with Three‐Dimensional Network Structure from Natural Dolomite (2004) (56)
- Multineedle TiO2 Nanostructures, Self-Assembled Surface Coatings, and Their Novel Properties (2010) (56)
- Curie Temperature Anomaly in Lead Zirconate Titanate/Silver Composites (2005) (56)
- Tensile creep and creep rupture behavior of monolithic and SiC-whisker-reinforced silicon nitride ceramics (1993) (55)
- High‐Strength Porous Alumina Ceramics by the Pulse Electric Current Sintering Technique (2004) (51)
- Triblock copolymer templated semi-crystalline mesoporous titania films containing emulsion-induced macropores (2009) (49)
- Synthesis and properties of porous Si3N4/SiC nanocomposites by carbothermal reaction between Si3N4 and carbon (2002) (46)
- Tin oxide nanosheet assembly for hydrophobic/hydrophilic coating and cancer sensing. (2012) (45)
- Connectivity of PS-b-PEO templated spherical pores in titanium oxide films. (2011) (45)
- Micropatterning of ZnO nanoarrays by forced hydrolysis of anhydrous zinc acetate. (2008) (44)
- Rapid fabrication of mesoporous titania films with controlled macroporosity to improve photocatalytic property. (2009) (44)
- Synthesis of Porous Si3N4 Ceramics with Rod‐Shaped Pore Structure (2005) (43)
- Macroporous Ceramics by Gelation–Freezing Route Using Gelatin (2014) (43)
- Advances in Solid Oxide Fuel Cells III (2007) (42)
- Fabrication of porous Al2O3 by microwave sintering and its properties (2001) (41)
- Effect of BN content on elastic modulus and bending strength of SiC-BN in situ composites (1999) (41)
- Strengthening and Toughening of Silicon Nitride by Superplastic Deformation (2005) (41)
- Reactive synthesis of alumina-boron nitride composites (2004) (40)
- High Thermal Conductivity Silicon Nitride Ceramics (2012) (39)
- Correlation of wear behavior and indentation fracture resistance in silicon nitride ceramics hot-pressed with alumina and yttria (2009) (39)
- High-Temperature Toughness and Tensile Strength of Whisker-Reinforced Silicon Nitride (1991) (38)
- Synthesis and Properties of Porous Single‐Phase β′‐SiAlON Ceramics (2004) (37)
- Dissolution−Recrystallization Induced Hierarchical Structure in ZnO: Bunched Roselike and Core−Shell-like Particles (2010) (37)
- Dye-sensitized biosystem sensing using macroporous semiconducting metal oxide films (2011) (36)
- Pressureless sintering mechanisms and mechanical properties of hafnium diboride ceramics with pre-sintering heat treatment (2010) (35)
- Corrosion and recession of mullite in water vapor environment (2008) (34)
- Shape-controlled growth of In(OH)3/In2O3 nanostructures by electrodeposition. (2010) (34)
- Phase transformation, microstructure and mechanical properties of Si3N4/SiC composite (2001) (34)
- Materials Research Innovations (1997) (34)
- Ceramic integration and joining technologies : from macro to nanoscale (2011) (33)
- High-strength porous silicon nitride fabricated by the sinter-forging technique (2001) (32)
- High-temperature mechanical properties of sinter-forged silicon nitride with ytterbia additive (2003) (31)
- Comparison of fracture resistance as measured by the indentation fracture method and fracture toughness determined by the single-edge-precracked beam technique using silicon nitrides with different microstructures (2007) (31)
- Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III (2007) (30)
- Recession behavior of a silicon nitride with multi-layered environmental barrier coating system (2007) (30)
- Bulk alumina support with high tolerant strain and its reinforcing mechanisms (2001) (30)
- Fast synthesis, optical and bio-sensor properties of SnO2 nanostructures by electrochemical deposition (2011) (29)
- Porous 2H-Silicon Carbide Ceramics Fabricated by Carbothermal Reaction between Silicon Nitride and Carbon (2003) (29)
- Comparison of Water Vapor Corrosion Behaviors of Ln2Si2O7 (Ln=Yb and Lu) and ASiO4 (A=Ti, Zr and Hf) EBC's (2006) (29)
- Reactive Synthesis of a Porous Calcium Zirconate/Spinel Composite with Idiomorphic Spinel Grains (2003) (29)
- Thermal shock resistance of porous silicon nitride ceramics (2003) (29)
- Engineered Ceramics: Current Status and Future Prospects (2016) (28)
- Porous Ceramic Materials (2013) (27)
- In situ Si3N4–SiC–BN composites: preparation, microstructures and properties (2002) (27)
- Fracture Resistance Behavior of Multilayered Silicon Nitride (2005) (27)
- Facile Synthesis, Characterization of ZnO Nanotubes and Nanoflowers in an Aqueous Solution (2010) (26)
- Microstructure and Mechanical Properties of Sinter–Post‐HIPed Si3N4–SiC Composites (2004) (26)
- Reactive Hot Pressing of Alumina‐Silicon Carbide Nanocomposites (2004) (25)
- Synthesis and evaluation of anisotropic porous silicon nitride (2004) (25)
- Relationship between fracture toughness determined by surface crack in flexure and fracture resistance measured by indentation fracture for silicon nitride ceramics with various microstructures (2009) (25)
- Fabrication of porous anisotropic silicon nitride by using partial sinter-forging technique (2002) (25)
- Sol–gel synthesis and coating of nanocrystalline Lu2Si2O7 on Si3N4 substrate (2004) (25)
- Long‐Term Tensile Creep Testing for Advanced Ceramics (1992) (24)
- Role of Zr(OH)4 hard agglomerates in fabricating porous ZrO2 ceramics and the reinforcing mechanisms (2003) (24)
- Hertzian contact damage in a highly porous silicon nitride ceramic (2003) (24)
- Improvement of Mechanical Properties and Corrosion Resistance of Porous β‐SiAlON Ceramics by Low Y2O3 Additions (2004) (24)
- Improved creep resistance of Si3N4/SiC nanocomposites fabricated from amorphous Si-C-N precursor powder (1996) (23)
- Grain boundary strength in non-cubic ceramic polycrystals with misfitting intragranular inclusions (nanocomposites) (2000) (23)
- Filtering Properties of Porous Ceramics with Unidirectionally Aligned Pores (2002) (23)
- Tensile Rupture Strength and Fracture Defects of Sintered Silicon Carbide (1989) (23)
- Water vapor corrosion of mullite containing small amount of sodium (2005) (22)
- Reaction Synthesis of Aluminum Nitride–Boron Nitride Composites Based on the Nitridation of Aluminum Boride (2004) (22)
- High-Performance Boron Nitride-Containing Composites by Reaction Synthesis for the Applications in the Steel Industry (2005) (21)
- Synthesis of nanograined ZrO2-based composites by chemical processing and pulse electric current sintering (1999) (21)
- In-Situ Reaction Synthesis of Non-Oxide Boron Nitride Composites (2002) (21)
- Crack profiles under a Vickers indent in silicon nitride ceramics with various microstructures (2010) (21)
- Pulse electric current sintering of Al2O3/3 vol% ZrO2 with constrained grains and high strength (2004) (21)
- TWO-DIMENSIONAL UNSTEADY THERMAL STRESSES IN A PARTIALLY HEATED CIRCULAR CYLINDER MADE OF FUNCTIONALLY GRADIENT MATERIALS (1999) (21)
- Recession mechanism of Lu2Si2O7 phase in high speed steam jet environment at high temperatures (2006) (20)
- High-temperature strength of sinter-forged silicon nitride with lutetia additive (2003) (20)
- Differential sintering by improper selection of sintering parameters during pulse electric current sintering (2004) (20)
- Highly Enhanced Surface Area of Tin Oxide Nanocrystals (2010) (20)
- Water vapor corrosion behavior of lutetium silicates at high temperature (2006) (20)
- Thermogravimetry, Differential Thermal Analysis, and Mass Spectrometry Study of the Silicon Nitride–Boron Carbide–Carbon Reaction System for the Synthesis of Silicon Carbide–Boron Nitride Composites (2002) (19)
- Site‐Selective Chemical Reaction on Flexible Polymer Films for Tin Oxide Nanosheet Patterning (2011) (19)
- Mullite–Boron Nitride Composite with High Strength and Low Elasticity (2004) (19)
- Environmental Issues and Waste Management Technologies in the Materials and Nuclear Industries XII (2009) (19)
- Effect of Y2O3-Al2O3 Additive on the Phase Formation and Densification Process of In Situ SiC-BN Composite (2001) (19)
- Recession behavior of Lu2SiO5 under a high speed steam jet at high temperatures (2011) (19)
- High-Surface-Area Alumina Ceramics with Aligned Macroscopic Pores (2001) (19)
- Subband structures and exciton and impurity states in V-shaped G a A s − G a 1 − x Al x As quantum wires (2000) (19)
- Uniformly Porous Composites with 3‐D Network Structure (UPC‐3D) for High‐Temperature Filter Applications (2005) (18)
- Porous mullite ceramics with high strength (2002) (18)
- Towards routine tensile testing (1988) (18)
- Fracture‐Mode Change in Alumina‐Silicon Carbide Composites Doped with Rare‐Earth Impurities (2003) (18)
- Polyethylenimine-Guided Self-Twin Zinc Oxide Nanoarray Assemblies (2009) (17)
- High‐Temperature Fracture Energy of Superplastically Forged Silicon Nitride (2004) (17)
- In situ forced hydrolysis-assisted fabrication and photo-induced electrical property in sensor of ZnO nanoarrays. (2008) (17)
- A facile template-free route to synthesize porous ZnO nanosheets with high surface area (2013) (16)
- Fabrication of Zn(OH)2/ZnO Nanosheet‐ZnO Nanoarray Hybrid Structured Films by a Dissolution–Recrystallization Route (2010) (16)
- Reactive hot-pressed alumina-boron nitride composites with Y2O3 sintering additive (2005) (16)
- Effects of matrix grain size on the mechanical properties of Si3N4/SiC nanocomposites densified with Y2O3 (1996) (16)
- CH4-Sensing and High-Temperature Mechanical Properties of Porous CaZrO3/MgO Composites with Three-Dimensional Network Structure (2001) (16)
- Yielding phenomena of hot-pressed Si3N4 (1987) (15)
- Room-temperature synthesis of tin oxide nano-electrodes in aqueous solutions (2009) (15)
- Advances in Bioceramics and Porous Ceramics (2013) (15)
- Dye Adsorption Characteristics of Anatase TiO2 Film Prepared in an Aqueous Solution (2009) (15)
- Dependence of high-temperature tensile strength on displacement rate for hot-pressed silicon nitride (1990) (15)
- Diffusional Crack Growth and Creep Rupture of Silicon Carbide Doped with Alumina (1994) (15)
- In Situ Synthesis and Microstructure of Poous CaAl4O7 Monolith and CaAl4O7/CaZrO3 Composite (2001) (15)
- Pulse electric current sintering and microstructure of industrial mullite in the presence of sintering aids (2004) (15)
- Effects of rare earth dopants on grain boundary bonding in alumina–silicon carbide composites (2004) (14)
- Synthesis of highly conductive and transparent ZnO nanowhisker films using aqueous solution (2008) (14)
- Fabrication of Blanket‐Like Assembled ZnO Nanowhiskers Using an Aqueous Solution (2009) (14)
- Effect of gelatin gel strength on microstructures and mechanical properties of cellular ceramics created by gelation freezing route (2017) (14)
- Indentation fracture resistance test round robin on silicon nitride ceramics (2010) (14)
- Synthesis and deformation behavior of nano-diphasic materials from natural dolomite (2001) (14)
- Water bathing synthesis of high-surface-area nanocrystal-assembled SnO2 particles (2012) (14)
- Room‐temperature synthesis and characterization of porous CeO2 thin films (2012) (14)
- Presintering Heat Treatment, Densification, and Mechanical Properties of Silicon Carbide (1994) (13)
- Formulation for the Effect of Surface Grinding on Strength Degradation of Ceramics (1992) (13)
- In Situ Processing of a Porous Calcium Zirconate/Magnesia Composite with Platinum Nanodispersion and Its Influence on Nitric Oxide Decomposition (2001) (13)
- Anisotropic thermal expansion of calcium dialuminate (CaAl4O7) simulated by molecular dynamics (2004) (13)
- Effects of polyethylenimine on morphology and property of ZnO films grown in aqueous solutions (2009) (13)
- Evaluation of fracture toughness of ceramic thin plates through modified single edge-precracked plate method (2015) (13)
- Cyclic Fatigue Strength of Engineering Ceramics a High Temperatures (1990) (13)
- Preparation and Characterization of Fine‐Grained 3Y‐TZP/BaFe12O19 In Situ Composites (1999) (13)
- Corrosion and recession behavior of zircon in water vapor environment at high temperature (2007) (13)
- In situ reaction synthesis of silicon carbide-boron nitride composite from silicon nitride-boron oxide-carbon (2004) (13)
- Fracture Resistance Behavior of High‐Thermal‐Conductivity Silicon Nitride Ceramics (2014) (12)
- Ligand-assisted fabrication of small mesopores in semi-crystalline titanium oxide films for high loading of Ru(II) dyes. (2011) (12)
- Low-temperature fabrication of ZnO nanoarray films by forced hydrolysis of anhydrous zinc acetate layer (2009) (12)
- High Temperature Hydro Corrosion Resistance of Silica Based Oxide Ceramics (2003) (12)
- Dynamic Fatigue Behavior of Ceramics at Room Temperature (1988) (12)
- Exposure test results of Lu2Si2O7 in combustion gas flow at high temperature and high speed (2004) (11)
- Preparation of reaction-bonded porous silicon carbide with denser surface layer in one-pot process (2015) (11)
- Control of crystal growth for ZnO nanowhisker films in aqueous solution (2009) (11)
- New Approach for Macro Porous RB‐SiC Derived from SiC/Novolac‐type Phenolic Composite (2016) (11)
- Squeeze Cast β‐Si3N4‐Al Composites (2002) (11)
- Threshold Stress in Creep of Alumina‐Silicon Carbide Nanocomposites (2005) (11)
- Corrosion and recession mechanism of Lu2Si2O7/mullite eutectic (2008) (11)
- Oxidation of Silicon Nitride in Wet Air and Effect of Lutetium Disilicate Coating (2005) (11)
- Effect of In-doping on the microstructure and CH4-sensing ability of porous CaZrO3/MgO composites (2002) (11)
- Development of EBC for Silicon Nitride (2005) (11)
- Exergy Consumption Through the Life Cycle of Ceramic Parts (2008) (11)
- Improved creep resistance in anisotropic silicon nitride (2001) (10)
- Sintering and microstructure of mullite–Mo composites (2002) (10)
- Mullitization and densification of Y2O3-doped reaction-bonded mullite ceramics with different compositions (2002) (10)
- Anisotropic behavior of water vapor corrosion of rutile TiO[sub]2 at high temperature (2004) (10)
- Low-temperature fabrication of bunch-shaped ZnO nanowires using an sodium hydroxide aqueous solution (2010) (10)
- Fracture Energies of Tape‐Cast Silicon Nitride with β‐Si3N4 Seed Addition (2005) (10)
- Low-temperature fabrication of porous and transparent ZnO films with hybrid structure by self-hydrolysis method (2009) (10)
- Long Term Tensile Creep Behavior of Highly Heat‐Resistant Silicon Nitride for Ceramic Gas Turbines (2008) (10)
- Oxidation-induced toughening and strengthening of Y2O3/SiC nanocomposites (1997) (10)
- Fabrication and Mechanical Properties of Porous Silicon Nitride Ceramics from Low-Purity Powder (2003) (10)
- Oxidation-induced strengthening and toughening behavior in micro- and nano-composites of Y2O3/SiC system (1998) (10)
- Fracture energy and tensile strength of silicon nitride at high temperatures (1990) (9)
- Superplastic forging of silicon nitride ceramics with anisotropic microstructure control (1998) (9)
- Lutetium disilicate coating on silicon nitride for high temperature oxidation resistance (2004) (9)
- Reaction‐Bonded and Superplastically Sinter‐Forged Silicon Nitride–Silicon Carbide Nanocomposites (2004) (9)
- Unidirectionally Porous Oxides Prepared Using Eutectic Reactions (2008) (9)
- Synthesis of Porous Silicon Nitride by Using Seed Crystals (2001) (8)
- Innovative processing and manufacturing of advanced ceramics and composites II (2014) (8)
- In‐Situ Reaction Synthesis of Oxide‐Boron Nitride Composites (2003) (8)
- Round-robin test on the fracture toughness of ceramic thin plates through modified single edge-precracked plate method (2016) (8)
- Effects of Plastic Deformation on Microstructure and Magnetic Properties of 3Y-TZP/Ba-M Type Ferrite Composite (特集 シナジー磁石と磁性材料) (1999) (8)
- Corrosion and oxidation behavior of ASiO4 (A= Ti, Zr and Hf) and silicon nitride with an HfSiO4 environmental barrier coating (2005) (8)
- Strength of Silicon Nitride after Thermal Shock (2003) (8)
- Grain bridging of highly anisotropic silicon nitride (1999) (8)
- Powder layer manufacturing of alumina ceramics using water spray bonding (2016) (8)
- Corrosion behavior of Al2O3 in static state water vapor environment at high temperature (2004) (8)
- Thermo-mechanical stability of porous alumina: effect of sintering parameters (2004) (8)
- SiAlON-Boron Nitride Porous Composites: In Situ Synthesis, Microstructure and Properties (2003) (7)
- Dynamic and Static Fatigue Strength and Crack Propagation of Engineering Ceramics (1990) (7)
- Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II: A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites (2015) (7)
- Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development (2017) (7)
- Long Crack R-Curve of Aligned Porous Silicon Nitride (2005) (7)
- Carbon dioxide absorption mechanisms of sodium added to calcium oxide at high temperatures (2004) (7)
- Shallow acceptor impurity states in V-shaped GaAs-Ga1 - xAlxAs quantum wires (2000) (6)
- Model Analysis of Multicrack Mechanisms in Ceramic/Superplastic Laminates (2004) (6)
- Porous silicon nitride-based ceramics fabricated from silicon and carbon powders (2001) (6)
- Joining of Silicon Nitride by Local Heating for Fabrication of Long Ceramic Pipes (2014) (6)
- Structure–Property Relations (2010) (6)
- Advances in materials science for eEnvironmental and nuclear technology (2010) (6)
- Semi-circular shaped ZnO nanowhiskers assemblies deposited using an aqueous solution (2008) (6)
- Additive Manufacturing and Strategic Technologies in Advanced Ceramics: Ceramic Transactions (2016) (6)
- Synthesis and Properties of Pressureless-Sintered 3Y-TZP/Ba-M Type Ferrite In Situ Composites (特集 磁性材料の化学) (2000) (6)
- Recession behavior of Lu2Si2O7/mullite eutectic in steam jet at high temperature (2005) (6)
- Tensile Creep Rupture and Subcritical Crack Growth of Silicon Nitride (1994) (6)
- Fabrication of ZnO nanowhiskers array film by forced-hydrolysis-initiated-nucleation technique using various templates (2009) (6)
- Measurement of Indentation Fracture Toughness of Silicon Nitride Ceramics: II, Effect of the Experimental Conditions (2007) (6)
- Corrosion Behaviour of Porous SiAlON Ceramics (2003) (5)
- Burner Rig Test of Silicon Nitride Gas Turbine Nozzle (2008) (5)
- Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials III: Ceramic Engineering and Science Proceedings V (2017) (5)
- High Temperature Water Vapor Corrosion Behavior of Titanium Aluminate (Al2TiO5) (2003) (5)
- High protein-adsorption characteristics of acicular crystal assembled TiO2 films and their photoelectric effect (2011) (5)
- Deformation conditions of β-SiAlON to achieve large superplastic elongation (1998) (5)
- Measurements of fracture toughness of ceramic thin plates through single-edge V-notch plate method (2016) (5)
- Measurement of Indentation Fracture Toughness of Silicon Nitride Ceramics: I, Effect of Microstructure of Materials (2007) (5)
- Selectively dissolution-recrystallization of ZnO crystals at the air-liquid interface (2009) (5)
- Real time optimization of thin plate TIG arc welding (1986) (5)
- Strategic Materials and Computational Design: Ceramic Engineering and Science Proceedings (2010) (5)
- Green and Sustainable Manufacturing of Advanced Materials—Progress and Prospects (2016) (5)
- Creep inhibition of ceramic/ceramic nanocomposites (2001) (5)
- High-Temperature Reliability of Advanced Ceramics (2001) (5)
- Yield of Si3N4 at Elevated Temperatures (1986) (5)
- 3rd International Congress on Ceramics (ICC3) (2011) (5)
- Polyethylenimine-assisted synthesis of transparent ZnO nanowhiskers at ambient temperatures (2014) (5)
- Joining of alumina with an alumina–zirconia insert under low mechanical pressure (2015) (5)
- Fabrication and characterization of porous alumina with denser surface layer by direct foaming (2017) (5)
- Rapid Low-Temperature Synthesis of Porous ZnO Nanoparticle Film by Self-Hydrolysis Technique (2010) (5)
- Development of a Novel Design for Diesel Particulate Filter (2005) (5)
- Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV: Ceramic Engineering and Science Proceedings (2010) (5)
- Enhanced Magnetization of 3 mol% Yttria‐Doped Zirconia/Barium Hexaferrite by Post‐Plastic Deformation (2004) (5)
- Exciton binding energy in V-shaped GaAs-Ga1-xAlxAs quantum wires (2001) (5)
- Fatigue Behaviour of Structural Ceramics (1992) (5)
- Change in stress, stress sensitivity and activation energy during superplastic deformation of silicon nitride (1999) (5)
- Effects of Porosity on Thermal Shock Resistance of Silicon Nitride Ceramics (2008) (5)
- Microstructure and mechanical properties of Y2O3/SiC nanocomposites (1997) (4)
- In Situ Formation of Hexaferrite Magnets within a 3Y‐TZP Matrix: La2O3–ZnO–Fe2O3 and BaO–Fe2O3 Systems (2004) (4)
- Tensile Creep and Creep Rupture Behavior of HIPED Silicon Nitride (1993) (4)
- Fabrication of Porous Silicon Nitride with High Porosity (2007) (4)
- Fabrication of Highly Porous Silicate Ceramics by Freeze‐Drying (2008) (4)
- Advances in Materials Science for Environmental and Energy Technologies II (2014) (4)
- Fatigue test for HPSi3N4 ceramics indented with knoop pyramid (1986) (4)
- Thermally stable high-strength porous alumina (2003) (4)
- Low‐Cost Silicon Nitride from β‐Silicon Nitride Powder and by Low‐Temperature Sintering (2015) (4)
- High temperature R-curve behavior and failure mechanisms of in-situ toughened composites (1995) (3)
- Facile Synthesis of Characteristic Tin Oxide Particulate Films in Aqueous Solution (2012) (3)
- Comparison of Recession Behavior between Lu2Si2O7 and Lu2SiO5 by High Speed Steam Jet at High Temperatures (2011) (3)
- Rapid densification of alumina ceramics with fine grains and high strength (2002) (3)
- Dynamic Fatigue Behavior of Ceramics at Elevated Temperatures (1990) (3)
- Laser machining of hot-pressed silicon nitride (1986) (3)
- Fabrication and characterization of porous alumina with a surface layer composed of alumina platelet by direct-foaming method (2017) (3)
- Indentation cracks in superplastically deformed silicon nitride consisting of strongly aligned rod-shaped grains (1998) (3)
- Advances in Solid Oxide Fuel Cells VI: Ceramic Engineering and Science Proceedings (2010) (3)
- Reaction Bonding of Porous Mullite Ceramics (2003) (3)
- Advances in High Temperature Ceramic Matrix Compo sites and Materials for Sustainable Development; Ceramic Transactions, Volume CCLXIII (2017) (3)
- High-temperature water vapor corrosion behavior of Lu4Hf3O12 phase (2004) (3)
- Fracture toughness of multilayer silicon nitride with crack deflection (1999) (3)
- Porous Ceramics with Controlled Aligned‐Pores Synthesized by Freeze‐Drying Process (2008) (3)
- In Situ Synthesis and Microstructure of Dense CaAl4O7 Monolith and CaAl4O7/CaZrO3 Composite (2001) (3)
- Nanostructured Materials and Nanotechnology IV: Ceramic Engineering and Science Proceedings (2010) (3)
- Tensile strength and fracture defects expanded by subcritical crack growth of silicon nitride at high temperatures (1990) (3)
- Advances in Materials Science for Environmental and Energy Technologies II: Ceramic Transactions (2012) (3)
- The Anisotropic Properties of the Tape Cast Si3N4 Ceramics with Rod-Like β-Si3N4 Seeds Addition (2006) (3)
- Evaluation of Mechanical Properties of Porous Silicon Nitride Produced by Partial Hot‐Pressing (2008) (3)
- Role of Sintering Aids in Phase Transformation, Microstructure and Mechanical Properties of Si3N4/SiC Nanocomposites (2001) (3)
- Effect of joining conditions on microstructure and flexural strength of long silicon nitride pipes fabricated by local heat-joining technique (2013) (3)
- Water bath synthesis of tin oxide nanostructure coating for a molecular sensor. (2014) (3)
- Comments on “Physical Limitations of the Inherent Toughness and Strength in Ceramic-Ceramic and Ceramic-Metal Nanocomposites” (1996) (3)
- Advanced Ceramic Coatings and Interfaces V: Ceramic Engineering and Science Proceedings (2010) (3)
- Effect of α-Phase on Superplastic Behavior of Silicon Nitride (1999) (3)
- Advanced processing and manufacturing technologies for structural and multifunctional materials, II : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2014) (3)
- Ceramic Integration across Length Scales: Technical Issues, Challenges, and Opportunities (2011) (2)
- Characterization of in Situ Sic‐BN Composites (2007) (2)
- Testing and Evaluation of Mechanical Properties (2013) (2)
- Preparation of Surfactant-free Core-Shell Poly(lactic acid) / Calcium Phosphate Hybrid Particles and Their Drug Release Characteristics (2011) (2)
- Effects of MgAl2O4-ZrO2 Addition on Sintering Behaviors and Mechanical Properties of Silicon Nitride Ceramics (2000) (2)
- Corrosion, wear, fatigue, and reliability of ceramics : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (2)
- Effect of Yb2O3 Addition on Si3N4-Lu2O3-SiO2 Ceramics (2006) (2)
- Fracture Behavior of Ceramic Based Nanocomposites (1998) (2)
- Advances in solid oxide fuel cells VI : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida (2010) (2)
- Aqueous phase deposition of dense tin oxide films with nano-structured surfaces (2014) (2)
- Reaction Synthesis of Ceramic Composites Containing In Situ Formed Boron Nitride as Dispersed Phase (2003) (2)
- Oxidation resistance and strength retention of silicon nitride coated with lutetium disilicate (2004) (2)
- Advances in Materials Science for Environmental and Nuclear Technology II: Sundaram/Advances (2011) (2)
- Porous Ceramics with Fine Uni‐Directionally‐Aligned Continuous Pores (2008) (2)
- Delayed fracture behavior of ceramics under tensile loading at elevated temperatures (2003) (2)
- Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si3N4 Ceramics (2004) (2)
- Phase development of Y2O3-doped reaction-bonded mullite ceramics (2001) (2)
- Microstructural Control and Mechanical Properties (2013) (2)
- Fracture‐Toughness Test of Silicon Nitrides with Different Microstructures Using Vickers Indentation (2009) (2)
- Growth of highly orientated and well-aligned ZnO nanowhiskers using aqueous solution (2007) (2)
- High Temperature Mechanical Properties of Partially Sinter-Forged Porous Anisotropic Silicon Nitride (2003) (2)
- Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII: Ohji/Advanced (2012) (2)
- Middle stage heat treatment for microstructure control of reaction-bonded silicon nitride-silicon carbide composite (2000) (2)
- Additive manufacturing of ceramic components (2019) (2)
- Exergy Analysis on the Life Cycle of Ceramic Parts (2008) (1)
- Innovative Processing and Manufacturing of Advanced Ceramics and Composites: Ceramic Transactions (2010) (1)
- Mechanical Properties and Performance of Engineering Ceramics and Composites V: Ceramic Engineering and Science Proceedings, Volume 31 (2010) (1)
- Advances in Materials Science for Environmental and Energy Technologies V: Ceramic Transactions: Ceramic Transactions, Volume CCLX (2016) (1)
- Advances in Materials Science for Environmental and Energy Technologies IV: Ceramic Transactions, Volume 253 (2015) (1)
- Strengthening Effect of In-Situ Dispersed Hexagonal Boron Nitride in Ceramic Composites (2006) (1)
- Microstructures and Mechanical Properties of Anisotropic Silicon Nitride Produced by Superplastic Deformation (1998) (1)
- Tensile Strength of HP-Si3N4 at Room and Elevated Temperatures (1986) (1)
- Mechanical properties and performance of engineering ceramics and composites VII : a collection of papers presented at the 36th International Conference on Advanced Ceramics and Composites, January 22-27, 2012, Daytona Beach, Florida (2010) (1)
- Advances in Solid Oxide Fuel Cells, IV : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (1)
- Microstructural Evolution and Mechanical/Thermal Properties of Silicon Nitride Ceramics (2015) (1)
- Adsorption Property of Dye Molecule over Semi-Crystalline Mesoporous Titania Films (2008) (1)
- Fabrication and Properties of High Thermal Conductivity Silicon Nitride (2013) (1)
- Fabrication of silicon nitride with lutetia additive (2004) (1)
- High-Strength Porous Silicon Nitride Fabricated by Partial Sinter-Forging (2003) (1)
- Effects of SiC Addition on Microstructure of Porous CaZrO3/MgO Composites (2001) (1)
- Corrosion Behavior of Porous Silicon Nitride and Sialon Ceramics (2008) (1)
- Green Manufacturing of Silicon Nitride Ceramics (2016) (1)
- Vickers Indentation Crack in Superplastically Compressive Deformed Silicon Nitride with Highly Anisotropic Microstructure (1999) (1)
- Processing of Porous Cazro3/MgO/Pt Composites Via in Situ Reactions (2008) (1)
- Strategic materials and computational design : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida (2010) (1)
- Mechanical Performance of Multi‐Layered Silicon Nitride (2008) (1)
- Gas‐Pressure Sintering of Silicon Nitride with Lutetia Additive (2008) (1)
- Phase Stabilities and Corrosion/Recession Properties of Rare Earth Silicates Under High Speed Steam jet (2014) (1)
- Lactic dehydrogenase virus (LDV) infection inhibits allergic eosinophil reaction in the airway. (2002) (1)
- Synthesis of Well-Aligned ZnO Nanowhisker Films Using Aqueous Solution for Use in Dye-Sensitized Sensor (2008) (1)
- Porous Al2O3 Ceramics with High Surface Area and Superior Mechanical Properties Fabricated by the Decomposition of Al(OH)3 (2001) (1)
- Fabrication and Mechanical Properties of Porous Silicon Nitride Materials (2009) (1)
- Corrosion, Wear, Fatigue, and Reliability of Ceramics (2008) (1)
- Environmentally Friendly Tin Oxide Coating through Aqueous Solution Process (2012) (1)
- Control of crystal growth of ZnO nanowhiskers in aqueous solution and synthesis of transparent nanoarrays (特集 自然に学ぶプロセス) (2007) (1)
- Fabrication of Fine-Grained 3Y-TZP/β-Al2O3 Composites (特集 超微細結晶粒材料の作成と物性) (1999) (1)
- Effect of microstructures on dielectric breakdown strength of sintered reaction‐bonded silicon nitride ceramics (2022) (1)
- Superplasticity of ZrO2 and ZrO2/Al2O3 composite consisting of nano-sized grains (1998) (1)
- Corrosion Mechanism of Lu2Si2O7 Phase in Static State Water Vapor Environment (2008) (1)
- Porous Silicon Nltride Synthsized by Using Seed Crystais (2008) (1)
- New Uniformly Porous CaZrO3/MgO Composites with Three‐Dimensional Network Structure from Natural Dolomite. (2000) (1)
- High-Strength and High-Toughness Porous Silicon Nitride for Structural Applications (2003) (1)
- Environmentally Friendly Processing of Macroporous Materials (2016) (1)
- Crystallization of Titania Films in Aqueous Solutions and Their Dye Adsorption Properties (2009) (0)
- Synthesis and evaluation of grain aligned silicon nitride (2002) (0)
- Effect of Porosity on Hertzian Contact Damage in Silicon‐Nitride Ceramics (2008) (0)
- Formation of Environmental Barrier Coating on SI3N4 by Gas‐Pressure Sintering (2008) (0)
- Nanostructured Materials and Nanotechnology IV : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida (2010) (0)
- Properties and estimation of mullite thermal insulators prepared by gelation–freezing with alumina nanofibers (2021) (0)
- Nanostructuring of Metal Oxides in Aqueous Solutions (2016) (0)
- Laser machining of hot-pressed silicon nitride: Affected layer by the machining (1987) (0)
- Highly Porous Silicon-Based Ceramics Fabricated with Restrained Sintering by Reaction Bonding (RSRB) (2003) (0)
- Advanced Materials for Sustainable Developments: Ceramic Engineering and Science Proceedings (2010) (0)
- ZnO Nanoarrays Film Grown by Forced-Hydrolysis-Initiated-Nucleation Technique and its Photo-Induced Electrical Property (2009) (0)
- Fabrication and Characteristics of Porous Si3N4 Ceramics with Whisker-Like Pores (2003) (0)
- Porous Anatase Titanium Dioxide Films Prepared in Aqueous Solution (2009) (0)
- Grain Boundary Strengthening of Porous Alumina Ceramics: Effect of Secondary Inclusions and Dopants (2002) (0)
- Joining of Silicon Nitride Long Pipes without Insert Material by Local Heating Technique (2013) (0)
- Failure Probabilities of Joints Consisting of Different Kinds of Brittle Materials (1986) (0)
- Anisotropic Porous Silicon Nitride Fabricated by Partial Forging Technique (2008) (0)
- In-Situ Formation and Coating of Cordierite Whiskers on Cordierite Based Honeycomb Support (2006) (0)
- Remembering Joanna McKittrick (2020) (0)
- Microstructure and Mechanical Properties of Sinter-Post-Hiped SI3N4-SIC Composites (2021) (0)
- Strengthening Mechanism of Alumina-Based Nanocomposites (2001) (0)
- In Situ Synthesis of Nonoxide‐Boron Nitride (Nobn) Composites (2012) (0)
- 10.1 Testing and Evaluation (2003) (0)
- Microstructure and mechanical properties of SiAlON ceramics with porous structure (2012) (0)
- Porous silicon nitride from starting powder with addition of coarse grain (2004) (0)
- Joining strength characteristics of large silicon nitride block joined without using any insert material (2014) (0)
- Optical absorption spectra associated with donors in a three-dimensional corner under an applied electric field (1999) (0)
- Preface to the Festschrift (2022) (0)
- Mechanical properties and processing of ceramic binary, ternary, and composite systems : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (0)
- Advanced ceramic coatings and interfaces V : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida (2010) (0)
- Porous Ceramics Processing (2020) (0)
- Adsorption properties of cytochrome c on ZnO nanotubes and nanoflowers (2009) (0)
- Microstructural Changes of Reactively Sintered Porous CaZrO3/MgAl2O4 Composites from Different Sources (2003) (0)
- Superplastically Sinter‐Forged Silicon Nitride (2008) (0)
- Development of Multi‐Layered EBC for Silicon Nitride Ceramics (2009) (0)
- Preparation and Characterization of RB‐SiC Ceramics Fabricated From Phenolic Resin/SiC (2015) (0)
- Effects of nitridation temperature on properties of sintered reaction‐bonded silicon nitride (2022) (0)
- In-situ investigation on crack-initiation and deformation of Al2O3 green bodies during dewaxing process by combined OCT-TG-FTIR and TMA (2023) (0)
- Correction to: “Preface to the Festschrift” Int. J. Appl. Ceram. Technol ., 2022;19:637–638 (2022) (0)
- Various factors to affect mechanical properties of silicon nitrides with lutetia additive (2005) (0)
- A Study on Strength Anisotropy and the Peculiarity of the Fracture Origin of HP-Si3N4 (1989) (0)
- AI‐determination of fracture toughness and bending strength of silicon nitride ceramics (2023) (0)
- Fracture Behavior of Porous Si3N4 Ceramics with Random and Aligned Microstructure (2012) (0)
- Recent Patents on High-Temperature CO2-Absorbent Ceramics (2009) (0)
- Strength in Water of Ground Structural Ceramics (1994) (0)
- Comparison of water vapor corrosion behaviors of Ln[sub]2Si[sub]2O[sub]7 (Ln=Yb and Lu) and ASiO[sub]4 (A=Ti, Zr and Hf) EBC's (2006) (0)
- 添加WC的自增韧ZrB2-SiC陶瓷的化学反应,晶粒各向异性生长和烧结机制研究 (2011) (0)
- Nanostructured materials and nanotechnology, II : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (0)
- Macro‐porous ceramics for the sustainable development goals (SDGs): Review (2022) (0)
- 高密度一体構造CaAl4O7やCaAl4O7/CaZrO3系複合材料のin‐situ合成と微細構造 (2002) (0)
- A Model Analysis on Multi-Crack Mechanisms in Ceramic/Superplastic Laminates (2001) (0)
- Thermal Residual Micro-Stress Concentration and Strength of SiC-Alumina Nanocomposites (1998) (0)
- Tensile Strength Properties of Sintered Silicon Carbide (1988) (0)
- Developments in strategic materials : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (0)
- Advances in ceramic armor VI : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida (2010) (0)
- Effects of Carbon Addition on Densification and Mechanical Properties of Porous Si3N4 Ceramics (2008) (0)
- Bending Strength of the Seeded and Tape Cast Si3N4 before and after Oxidation Exposure in Air at 1500°C (2005) (0)
- Rolling Contact Fatigue Properties and Fracture Resistance for Silicon Nitride Ceramics with Various Microstructures (2009) (0)
- Tensile creep failures of Al{sub 2}O{sub 3}/SiC nanocomposite (1994) (0)
- Porous silicon nitride and SiAlON ceramics: Fabrication and characterization (2004) (0)
- Reaction synthesis of high performance boron nitride-containing composites (BNCC) (2004) (0)
- Shock Sintering of Nanocrystalline Titania (2003) (0)
- Advances in ceramic armor, IV : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (0)
- Fracture Resistance and Wear Properties of Silicon Nitride Ceramics (2008) (0)
- Tailored surface porosities on ceramic foams (2017) (0)
- The science of engineering ceramics : proceedings of the 3rd International Symposium on the Science of Engineering Ceramics(EnCera'04), October 31st-November 3rd, 2004 : in conjunction with the 12th International Seminar on the Core University Program(CUP) between Japan and Korea (2006) (0)
- Application of AM–DCB method to the high–temperature R–curve study of a Si3N4 ceramics (1994) (0)
- OS8(1)-1(OS08W0025) Fracture Behavior of Novel Porous Silicon (2003) (0)
- Fabrication of Blanket-Like ZnO Nanowhisker Assembly Using an (2009) (0)
- Development of EBC for silicon nitride ceramics (2005) (0)
- Optical and adsorption properties of ZnO nanotubes prepared from aqueous solutions (2010) (0)
- Synthesis and Characterization of Fine‐Grained 3Y‐TZP/Hexaferrite in Situ Composites (2008) (0)
- Seleceted Abstract from Yogyo-Kyokai-ShiTensile strength of HPSi3N4 at room and elevated temperatures (1987) (0)
- List of Editors (2019) (0)
- Anisotropic Crystal Growth and Microstructure Observation of Single Phase SnO₂ Nano-sheet Assemblies (特集 先端材料・デバイスの溶液プロセシング) (2012) (0)
- Ionic conduction mechanisms of apatite-type lanthanum silicate and germanate from first principles (2017) (0)
- Recession mechanism of Lu[sub]2Si[sub]2O[sub]7 phase in high speed steam jet environment at high temperatures (2006) (0)
- Fabrication and characterization of porous alumina with denser surface layer by direct blowing (2016) (0)
- Advanced materials for sustainable developments : a collection of papers presented at the 34th International Conference on Advanced Ceramics and Composites, January 24-29, 2010, Daytona Beach, Florida (2010) (0)
- Fracture Behavior of Porous Silicon Nitrides (2002) (0)
- Intra‐Granular Strengthening and Toughening by Brittle Nanoparticles in Ceramic Nanocomposites (2008) (0)
- SIC Crystal Growth at Low Temperatures Derived from Polycarbosilane with Boron Carbide Additive (2014) (0)
- Advanced ceramic coatings and interfaces, III : a collection of papers presented at the 32nd international conference on advanced ceramics and composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (0)
- Reaction Bonding of Oxide Coatings on Silicon Nitride (2008) (0)
- Fracture toughness evaluation of silicon nitride from microstructures via convolutional neural network (2022) (0)
- Growth of Highly Orientated and Well-Aligned ZnO Nanowhiskers Using Aqueous Solutions (2009) (0)
- Influence of Growth Conditions on the Morphology of Zinc Oxide Nanoarrays (2008) (0)
- Environmental issues and waste management technologies in the materials and nuclear industries XII : a collection of papers presented at the 2008 Materials Science and Technology Conference (MS&T08), October 5-9, 2008, Pittsburgh, Pennsylvania (2009) (0)
- Deformation behaviors and fracture strength of β‐Si 3 N 4 single crystals (2023) (0)
- Superplastic Tensile Behavior of Silicon Nitride (2001) (0)
- Mechanical Properties of Porous Silicon Nitride from Fine/Coarse Powder Mixture (2008) (0)
- Stability of Silicon Nitride Coated with Lutetium Disilicate in an Oxidative Environment (2008) (0)
- Comprar Environmental Issues and Waste Management Technologies in the Materials and Nuclear Industries XII: Ceramic Transactions Volume 207 | C. K. Zercher | 9780470408483 | Wiley (2009) (0)
- Sol–gel synthesis and coating of nanocrystalline Lu[sub]2Si[sub]2O[sub]7 on Si[sub]3N[sub4 substrate (2004) (0)
- Advances in Ceramics Armor VI: Ceramic Engineering and Science Proceedings (2010) (0)
- Recession Characteristics of Lu2Si2O7 in Combustion Gas Flow at High Temperature and High Speed (2005) (0)
- Characterization of Optical- and N 2 Adsorption Properties of Self-Twin Zinc Oxide Nanoarrays Assemblies (2013) (0)
- Fabrication and Properties of the Tape-Cast Si3N4 with Rod-Like Si3N4 Seed Addition (2004) (0)
- Study of Factors Affecting the Lengths of Surface Cracks in Silicon Nitride Introduced by Vickers Indentation (2009) (0)
- Microstructure Modification with Seed Crystal on the Surface Layer of Silicon Nitride Sintered Body (2003) (0)
- Comprar Fiesers' Reagents for Organic Synthesis, Volume 25 | Alex Cozzi | 9780470433751 | Wiley (2009) (0)
- Advances in bioceramics and porous ceramics : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida (2009) (0)
- Comprar Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials | Tatsuki Ohji | 9780470196380 | Wiley (2007) (0)
- Low-Temperature Fabrication of Semi-Circular Shaped ZnO Nanowhiskers Using an Aqueous Solution (2007) (0)
- Reaction Synthesized Boron Nitride-Containing Composites (BNCC) (2004) (0)
- Platinum Nano-Dispersion via In Situ Processing - Preparation and catalytic Property of Porous $CaZrO_3/MgO/Pt$ Nanocomposite (2001) (0)
- ZnO nanoarrays film grown by forced hydrolysis-initiated-nucleation technique (2008) (0)
- Joining of Silicon Nitride Ceramics by Local Heating Technique—Strength and Microstructure (2013) (0)
- Characterization of in situ Nonoxide‐Boron Nitride (Nobn) Composites (2012) (0)
- Pressureless-Sintering of CaZrO3/MgO In Situ Composites Derived from Natural Dolomite with Various Additives (2021) (0)
- Solvent effects on morphologies of hollow silica nanoparticles prepared by poly-acrylic acid template method (2023) (0)
- Porous Ceramics Including Fibrous Insulation, Structure and Properties of (2014) (0)
- High Temperature Bending Strength and Fracture Energies of the Tape‐Cast Silicon Nitride with β‐Si3N4 Seed Addition (2012) (0)
- Metal Oxide Nanoelectrodes for Environmental Sensors ‐ ZNO Rods and Particulate Films (2010) (0)
- Abstracts of Articles Published in Materials Research Innovations 2(2) (1998) (0)
- Novel Processing of Ceramics and Composites: Ceramic Transactions Series (2006) (0)
- Noble preparation route for combustion catalyst from [beta]-Al[sub]2O[sub]3/LaAlO[sub]3 eutectic (2003) (0)
- Microstructural Control and Mechanical Properties of Advanced Ceramics (2013) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Tatsuki Ohji?
Tatsuki Ohji is affiliated with the following schools: