Tonio Buonassisi
#147,756
Most Influential Person Now
Mechanical Engineer, researcher
Tonio Buonassisi's AcademicInfluence.com Rankings
Tonio Buonassisiengineering Degrees
Engineering
#5846
World Rank
#7131
Historical Rank
Mechanical Engineering
#544
World Rank
#592
Historical Rank
Applied Physics
#1773
World Rank
#1805
Historical Rank
Download Badge
Engineering
Why Is Tonio Buonassisi Influential?
(Suggest an Edit or Addition)Tonio Buonassisi's Published Works
Number of citations in a given year to any of this author's works
Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author
Published Works
- Promises and challenges of perovskite solar cells (2017) (1155)
- 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability (2017) (1081)
- Semi-transparent perovskite solar cells for tandems with silicon and CIGS (2015) (581)
- Identifying defect-tolerant semiconductors with high minority carrier lifetimes: Beyond hybrid lead halide perovskites (2015) (539)
- A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction (2015) (449)
- Pathways for solar photovoltaics (2015) (362)
- Hybrid Organic–Inorganic Perovskites (HOIPs): Opportunities and Challenges (2015) (325)
- Enhancing the efficiency of SnS solar cells via band-offset engineering with a zinc oxysulfide buffer layer (2013) (309)
- An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss (2019) (302)
- Crystalline silicon photovoltaics: a cost analysis framework for determining technology pathways to reach baseload electricity costs (2012) (282)
- Methylammonium Bismuth Iodide as a Lead-Free, Stable Hybrid Organic-Inorganic Solar Absorber. (2016) (278)
- Terawatt-scale photovoltaics: Trajectories and challenges (2017) (277)
- Metal Content of Multicrystalline Silicon for Solar Cells and its Impact on Minority Carrier Diffusion Length (2003) (237)
- Ten-percent solar-to-fuel conversion with nonprecious materials (2014) (224)
- Atomic Layer Deposited Gallium Oxide Buffer Layer Enables 1.2 V Open‐Circuit Voltage in Cuprous Oxide Solar Cells (2014) (219)
- SnS thin-films by RF sputtering at room temperature (2011) (219)
- 3.88% Efficient Tin Sulfide Solar Cells using Congruent Thermal Evaporation (2014) (215)
- Open-circuit voltage deficit, radiative sub-bandgap states, and prospects in quantum dot solar cells. (2015) (214)
- Technology and Market Perspective for Indoor Photovoltaic Cells (2019) (210)
- Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites (2019) (209)
- Searching for “Defect-Tolerant” Photovoltaic Materials: Combined Theoretical and Experimental Screening (2017) (205)
- Engineering metal-impurity nanodefects for low-cost solar cells (2005) (191)
- Chemical natures and distributions of metal impurities in multicrystalline silicon materials (2005) (187)
- Light-induced water oxidation at silicon electrodes functionalized with a cobalt oxygen-evolving catalyst (2011) (185)
- Ultrathin amorphous zinc-tin-oxide buffer layer for enhancing heterojunction interface quality in metal-oxide solar cells (2013) (168)
- Accelerating Materials Development via Automation, Machine Learning, and High-Performance Computing (2018) (167)
- Room-temperature sub-band gap optoelectronic response of hyperdoped silicon (2014) (167)
- Investigation of Bismuth Triiodide (BiI3) for Photovoltaic Applications. (2015) (164)
- Improved Cu2O‐Based Solar Cells Using Atomic Layer Deposition to Control the Cu Oxidation State at the p‐n Junction (2014) (155)
- Assessing the drivers of regional trends in solar photovoltaic manufacturing (2013) (152)
- Fast and interpretable classification of small X-ray diffraction datasets using data augmentation and deep neural networks (2018) (146)
- Metal precipitation at grain boundaries in silicon: Dependence on grain boundary character and dislocation decoration (2006) (133)
- Control of metal impurities in "dirty" multicrystalline silicon for solar cells (2006) (132)
- Hall mobility of cuprous oxide thin films deposited by reactive direct-current magnetron sputtering (2011) (130)
- The capital intensity of photovoltaics manufacturing: barrier to scale and opportunity for innovation (2015) (127)
- Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells (2015) (127)
- Insulator-to-metal transition in selenium-hyperdoped silicon: observation and origin. (2011) (125)
- Engineering Solutions and Root-Cause Analysis for Light-Induced Degradation in p-Type Multicrystalline Silicon PERC Modules (2016) (124)
- Synchrotron-based investigations of the nature and impact of iron contamination in multicrystalline silicon solar cells (2005) (113)
- Strongly Enhanced Photovoltaic Performance and Defect Physics of Air‐Stable Bismuth Oxyiodide (BiOI) (2017) (107)
- Accelerated Development of Perovskite-Inspired Materials via High-Throughput Synthesis and Machine-Learning Diagnosis (2019) (104)
- Nitrogen-doped cuprous oxide as a p-type hole-transporting layer in thin-film solar cells (2013) (103)
- A-Site Cation in Inorganic A3Sb2I9 Perovskite Influences Structural Dimensionality, Exciton Binding Energy, and Solar Cell Performance (2018) (101)
- Extended infrared photoresponse and gain in chalcogen-supersaturated silicon photodiodes (2011) (100)
- Perovskite-Inspired Photovoltaic Materials: Toward Best Practices in Materials Characterization and Calculations (2017) (98)
- Modeling the Cost and Minimum Sustainable Price of Crystalline Silicon Photovoltaic Manufacturing in the United States (2013) (97)
- Modeling integrated photovoltaic–electrochemical devices using steady-state equivalent circuits (2013) (96)
- Iron point defect reduction in multicrystalline silicon solar cells (2008) (94)
- Phase transition-induced band edge engineering of BiVO4 to split pure water under visible light (2015) (90)
- Band offsets of n-type electron-selective contacts on cuprous oxide (Cu2O) for photovoltaics (2014) (88)
- Triplet-Sensitization by Lead Halide Perovskite Thin Films for Near-Infrared-to-Visible Upconversion (2019) (88)
- Antimony-Doped Tin(II) Sulfide Thin Films (2012) (86)
- X-ray beam induced current—a synchrotron radiation based technique for the in situ analysis of recombination properties and chemical nature of metal clusters in silicon (2002) (84)
- Impact of metal silicide precipitate dissolution during rapid thermal processing of multicrystalline silicon solar cells (2005) (82)
- Autonomous experimentation systems for materials development: A community perspective (2021) (81)
- Non-cubic solar cell materials (2015) (76)
- High photocurrent in silicon photoanodes catalyzed by iron oxide thin films for water oxidation. (2012) (76)
- Dislocation density reduction in multicrystalline silicon solar cell material by high temperature annealing (2008) (75)
- Nanoprobe X-ray fluorescence characterization of defects in large-area solar cells (2011) (74)
- High Tolerance to Iron Contamination in Lead Halide Perovskite Solar Cells. (2017) (71)
- The realistic energy yield potential of GaAs-on-Si tandem solar cells: a theoretical case study. (2015) (70)
- Nickel: A very fast diffuser in silicon (2013) (70)
- Solvent-Engineering Method to Deposit Compact Bismuth-Based Thin Films: Mechanism and Application to Photovoltaics (2018) (69)
- Self‐Powered Sensors Enabled by Wide‐Bandgap Perovskite Indoor Photovoltaic Cells (2019) (62)
- Evolution of LeTID Defects in p-Type Multicrystalline Silicon During Degradation and Regeneration (2017) (60)
- Improved iron gettering of contaminated multicrystalline silicon by high temperature phosphorus diffusion (2013) (60)
- Enhanced visible light absorption for lead-free double perovskite Cs2AgSbBr6. (2019) (60)
- Economically sustainable scaling of photovoltaics to meet climate targets (2016) (60)
- A data fusion approach to optimize compositional stability of halide perovskites (2021) (59)
- Precipitated iron: A limit on gettering efficacy in multicrystalline silicon (2013) (59)
- Transition metals in photovoltaic-grade ingot-cast multicrystalline silicon: Assessing the role of impurities in silicon nitride crucible lining material (2006) (59)
- Two-step machine learning enables optimized nanoparticle synthesis (2020) (58)
- Impurity‐to‐efficiency simulator: predictive simulation of silicon solar cell performance based on iron content and distribution (2011) (58)
- Correction: Revisiting thin silicon for photovoltaics: a technoeconomic perspective (2019) (58)
- Lifetime Spectroscopy Investigation of Light-Induced Degradation in p-type Multicrystalline Silicon PERC (2016) (58)
- Transition metal co-precipitation mechanisms in silicon (2007) (57)
- AI Applications through the Whole Life Cycle of Material Discovery (2020) (57)
- Infrared birefringence imaging of residual stress and bulk defects in multicrystalline silicon (2010) (57)
- Supersaturating silicon with transition metals by ion implantation and pulsed laser melting (2013) (57)
- Technoeconomic model of second-life batteries for utility-scale solar considering calendar and cycle aging (2020) (56)
- Analysis of copper-rich precipitates in silicon: chemical state, gettering, and impact on multicrystalline silicon solar cell material (2005) (56)
- Variations of ionization potential and electron affinity as a function of surface orientation: The case of orthorhombic SnS (2014) (55)
- Economic viability of thin-film tandem solar modules in the United States (2018) (55)
- Interfaces between water splitting catalysts and buried silicon junctions (2013) (54)
- Transient terahertz photoconductivity measurements of minority-carrier lifetime in tin sulfide thin films: Advanced metrology for an early-stage photovoltaic material (2015) (53)
- Enhancing the Infrared Photoresponse of Silicon by Controlling the Fermi Level Location within an Impurity Band (2014) (52)
- Observation of transition metals at shunt locations in multicrystalline silicon solar cells (2004) (52)
- How machine learning can help select capping layers to suppress perovskite degradation (2020) (52)
- Urban haze and photovoltaics (2018) (51)
- Structural origins of intrinsic stress in amorphous silicon thin films (2012) (50)
- Precursor Concentration Affects Grain Size, Crystal Orientation, and Local Performance in Mixed-Ion Lead Perovskite Solar Cells (2018) (49)
- Iron distribution in silicon after solar cell processing: Synchrotron analysis and predictive modeling (2011) (47)
- Reactivation of sub-bandgap absorption in chalcogen-hyperdoped silicon (2011) (46)
- Discovery of temperature-induced stability reversal in perovskites using high-throughput robotic learning (2021) (45)
- Low intensity conduction states in FeS2: implications for absorption, open-circuit voltage and surface recombination (2013) (45)
- Methodology for vetting heavily doped semiconductors for intermediate band photovoltaics: A case study in sulfur-hyperdoped silicon (2013) (45)
- Dopant Activation in Sn-Doped Ga2O3 Investigated by X-Ray Absorption Spectroscopy (2015) (45)
- Machine learning enables polymer cloud-point engineering via inverse design (2018) (45)
- Influence of defect type on hydrogen passivation efficacy in multicrystalline silicon solar cells (2011) (43)
- Optimizing phosphorus diffusion for photovoltaic applications: Peak doping, inactive phosphorus, gettering, and contact formation (2016) (43)
- Accelerating Photovoltaic Materials Development via High-Throughput Experiments and Machine-Learning-Assisted Diagnosis (2018) (42)
- Targeted Search for Effective Intermediate Band Solar Cell Materials (2015) (42)
- Picosecond carrier recombination dynamics in chalcogen-hyperdoped silicon (2014) (40)
- Benchmarking the performance of Bayesian optimization across multiple experimental materials science domains (2021) (39)
- Global Prediction of Photovoltaic Field Performance Differences Using Open-Source Satellite Data (2017) (39)
- PROGRESS WITH LUMINESCENCE IMAGING FOR THE CHARACTERISATION OF SILICON WAFERS AND SOLAR CELLS (2007) (39)
- Organic Vapor Passivation of Silicon at Room Temperature (2013) (38)
- Techno-economic analysis of tandem photovoltaic systems (2016) (38)
- Long Range Battery-Less PV-Powered RFID Tag Sensors (2019) (38)
- Making Record-efficiency SnS Solar Cells by Thermal Evaporation and Atomic Layer Deposition. (2015) (37)
- Deactivation of metastable single-crystal silicon hyperdoped with sulfur (2013) (37)
- Analyses of the Evolution of Iron-Silicide Precipitates in Multicrystalline Silicon During Solar Cell Processing (2013) (36)
- Energy Yield Limits for Single-Junction Solar Cells (2018) (36)
- Rapid Photovoltaic Device Characterization through Bayesian Parameter Estimation (2017) (36)
- The Value of Efficiency in Photovoltaics (2019) (36)
- Dislocation formation in seeds for quasi-monocrystalline silicon for solar cells (2014) (35)
- Energy-yield prediction for II–VI-based thin-film tandem solar cells (2016) (35)
- State‐of‐the‐Art Electron‐Selective Contacts in Perovskite Solar Cells (2018) (34)
- How far does the defect tolerance of lead-halide perovskites range? The example of Bi impurities introducing efficient recombination centers (2019) (34)
- Numerical Analysis of Radiative Recombination and Reabsorption in GaAs/Si Tandem (2015) (34)
- Effective lifetimes exceeding 300 μs in gettered p-type epitaxial kerfless silicon for photovoltaics (2013) (33)
- Perovskite PV-Powered RFID: Enabling Low-Cost Self-Powered IoT Sensors (2019) (33)
- Framework to predict optimal buffer layer pairing for thin film solar cell absorbers: A case study for tin sulfide/zinc oxysulfide (2015) (33)
- Economically Sustainable Growth of Perovskite Photovoltaics Manufacturing (2019) (33)
- High-Performance and Traditional Multicrystalline Silicon: Comparing Gettering Responses and Lifetime-Limiting Defects (2016) (32)
- Optimization and design of a low-cost, village-scale, photovoltaic-powered, electrodialysis reversal desalination system for rural India (2019) (32)
- Quantifying the effect of metal-rich precipitates on minority carrier diffusion length in multicrystalline silicon using synchrotron-based spectrally resolved x-ray beam-induced current (2005) (32)
- Perspective: Maintaining surface-phase purity is key to efficient open air fabricated cuprous oxide solar cells (2015) (31)
- An Invertible Crystallographic Representation for General Inverse Design of Inorganic Crystals with Targeted Properties (2020) (31)
- Structural and Chemical Features Giving Rise to Defect Tolerance of Binary Semiconductors (2018) (30)
- Building intuition of iron evolution during solar cell processing through analysis of different process models (2015) (29)
- Machine Learning with Knowledge Constraints for Process Optimization of Open-Air Perovskite Solar Cell Manufacturing (2021) (29)
- Local Measurements of Diffusion Length and Chemical Character of Metal Clusters in Multicrystalline Silicon (2005) (29)
- Solubility and Diffusivity: Important Metrics in the Search for the Root Cause of Light- and Elevated Temperature-Induced Degradation (2018) (28)
- Inverse design of crystals using generalized invertible crystallographic representation (2020) (28)
- Transition metal interaction and Ni-Fe-Cu-Si phases in silicon (2007) (28)
- Minority-carrier lifetime and defect content of n-type silicon grown by the noncontact crucible method (2014) (28)
- X-ray beam induced current/microprobe x-ray fluorescence: synchrotron radiation based x-ray microprobe techniques for analysis of the recombination activity and chemical nature of metal impurities in silicon (2004) (28)
- Extended X-ray absorption fine structure spectroscopy of selenium-hyperdoped silicon (2013) (27)
- Roadmap for cost-effective, commercially-viable perovskite silicon tandems for the current and future PV market (2019) (27)
- Evaluating root cause: The distinct roles of hydrogen and firing in activating light- and elevated temperature-induced degradation (2018) (27)
- Advantages of operation flexibility and load sizing for PV-powered system design (2018) (27)
- Applications of synchrotron radiation X-ray techniques on the analysis of the behavior of transition metals in solar cells and single-crystalline silicon with extended defects (2003) (27)
- Effi cient Tin Sulfi de Solar Cells using Congruent Thermal Evaporation (2014) (26)
- Embedding physics domain knowledge into a Bayesian network enables layer-by-layer process innovation for photovoltaics (2019) (26)
- Low contact resistivity of metals on nitrogen-doped cuprous oxide (Cu2O) thin-films (2012) (26)
- Meeting global cooling demand with photovoltaics during the 21st century (2019) (26)
- Improving the Carrier Lifetime of Tin Sulfide via Prediction and Mitigation of Harmful Point Defects. (2017) (26)
- Fabrication and characterization of single junction GaAs solar cells on Si with As-doped Ge buffer (2017) (25)
- Halide Heterogeneity Affects Local Charge Carrier Dynamics in Mixed-Ion Lead Perovskite Thin Films (2019) (25)
- Material requirements for the adoption of unconventional silicon crystal and wafer growth techniques for high‐efficiency solar cells (2016) (25)
- Synchrotron-based analysis of chromium distributions in multicrystalline silicon for solar cells (2015) (25)
- An insight into dislocation density reduction in multicrystalline silicon (2016) (24)
- Adaptive power consumption improves the reliability of solar-powered devices for internet of things (2018) (24)
- Stress effects on the Raman spectrum of an amorphous material: Theory and experiment on a -Si:H (2015) (24)
- Au-rich filamentary behavior and associated subband gap optical absorption in hyperdoped Si (2017) (24)
- Complex intermetallic phase in multicrystalline silicon doped with transition metals (2006) (24)
- High-performance p-type multicrystalline silicon (mc-Si): Its characterization and projected performance in PERC solar cells (2018) (23)
- Origins of structural hole traps in hydrogenated amorphous silicon. (2013) (23)
- Sorting Metrics for Customized Phosphorus Diffusion Gettering (2014) (23)
- Non-monotonic effect of growth temperature on carrier collection in SnS solar cells (2015) (23)
- Synchrotron-based investigation of transition-metal getterability in n-type multicrystalline silicon (2016) (23)
- Interpretable and Explainable Machine Learning for Materials Science and Chemistry (2021) (23)
- A Two-Step Absorber Deposition Approach To Overcome Shunt Losses in Thin-Film Solar Cells: Using Tin Sulfide as a Proof-of-Concept Material System. (2016) (22)
- Determining interface properties limiting open-circuit voltage in heterojunction solar cells (2017) (22)
- Application of synchrotron-radiation-based x-ray microprobe techniques for the analysis of recombination activity of metals precipitated at Si/SiGe misfit dislocations (2002) (22)
- Single‐Phase Filamentary Cellular Breakdown Via Laser‐Induced Solute Segregation (2015) (22)
- Identification of lifetime limiting defects by temperature- and injection-dependent photoluminescence imaging (2016) (22)
- The GaAs/GaAs/Si solar cell – Towards current matching in an integrated two terminal tandem (2017) (22)
- On the methodology of energy yield assessment for one-Sun tandem solar cells (2016) (22)
- Field demonstration of a cost-optimized solar powered electrodialysis reversal desalination system in rural India (2020) (21)
- Retrograde Melting and Internal Liquid Gettering in Silicon (2010) (21)
- Thin silicon solar cells: Pathway to cost-effective and defect-tolerant cell design (2017) (21)
- Shape and quality of Si single bulk crystals grown inside Si melts using the noncontact crucible method (2014) (21)
- Machine Learning for Novel Thermal-Materials Discovery: Early Successes, Opportunities, and Challenges. (2019) (21)
- Quantitative analysis of degradation mechanisms in 30-year-old PV modules (2019) (21)
- Engineering metal precipitate size distributions to enhance gettering in multicrystalline silicon (2012) (20)
- The Effect of Structural Dimensionality on Carrier Mobility in Lead-Halide Perovskites (2019) (20)
- Phosphonic Acid Modification of the Electron Selective Contact: Interfacial Effects in Perovskite Solar Cells (2019) (20)
- The impact of sodium contamination in tin sulfide thin-film solar cells (2016) (20)
- Soft x-ray emission spectroscopy studies of the electronic structure of silicon supersaturated with sulfur (2011) (20)
- X-ray absorption spectroscopy elucidates the impact of structural disorder on electron mobility in amorphous zinc-tin-oxide thin films (2014) (19)
- Sustainable silicon photovoltaics manufacturing in a global market: A techno-economic, tariff and transportation framework (2018) (19)
- Variation of dislocation etch-pit geometry : An indicator of bulk microstructure and recombination activity in multicrystalline silicon (2014) (19)
- Towards the Tailoring of P Diffusion Gettering to As-Grown Silicon Material Properties (2011) (18)
- Evaluating root cause: the distinct roles of hydrogen and firing in activating light- and elevated-temperature induced degradation (2018) (18)
- The Impact of COVID-19-Related Measures on the Solar Resource in Areas with High Levels of Air Pollution (2020) (18)
- Dislocation Density Reduction During Impurity Gettering in Multicrystalline Silicon (2012) (18)
- Residual stress and dislocations density in silicon ribbons grown via optical zone melting (2013) (17)
- Rapid dislocation‐density mapping of as‐cut crystalline silicon wafers (2013) (17)
- A Next-Generation Hard X-Ray Nanoprobe Beamline for In Situ Studies of Energy Materials and Devices (2013) (17)
- Spontaneous Lateral Phase Separation of AlInP During Thin Film Growth and its Effect on Luminescence (2015) (17)
- Darwin at High Temperature: Advancing Solar Cell Material Design Using Defect Kinetics Simulations and Evolutionary Optimization (2014) (17)
- Latest developments in the x-ray based characterization of thin-film solar cells (2015) (17)
- Earth abundant materials for high efficiency heterojunction thin film solar cells (2009) (17)
- Textured conducting glass by nanosphere lithography for increased light absorption in thin-film solar cells (2014) (16)
- Controlling Dopant Profiles in Hyperdoped Silicon by Modifying Dopant Evaporation Rates During Pulsed Laser Melting (2012) (16)
- A Framework for Process-to-Module Modeling of a-Si/c-Si (HIT) Heterojunction Solar Cells to Investigate the Cell-to-Module Efficiency Gap (2016) (15)
- Highly tensile-strained Ge/InAlAs nanocomposites (2017) (15)
- Solar research not finished (2016) (15)
- Worldwide theoretical comparison of outdoor potential for various silicon-based tandem module architectures (2020) (15)
- Investigation of Lifetime-Limiting Defects After High-Temperature Phosphorus Diffusion in High-Iron-Content Multicrystalline Silicon (2014) (15)
- Detection of sub-500-μm cracks in multicrystalline silicon wafer using edge-illuminated dark-field imaging to enable thin solar cell manufacturing (2019) (15)
- Development of an in situ temperature stage for synchrotron X-ray spectromicroscopy. (2015) (14)
- Stress‐enhanced dislocation density reduction in multicrystalline silicon (2011) (14)
- Multi‐Fidelity High‐Throughput Optimization of Electrical Conductivity in P3HT‐CNT Composites (2021) (14)
- Developing a Robust Recombination Contact to Realize Monolithic Perovskite Tandems With Industrially Common p-Type Silicon Solar Cells (2018) (14)
- Predicting the outdoor performance of flat-plate III–V/Si tandem solar cells (2017) (14)
- Transfer Learning-Based Artificial Intelligence-Integrated Physical Modeling to Enable Failure Analysis for 3 Nanometer and Smaller Silicon-Based CMOS Transistors (2021) (14)
- Microscopic Distributions of Defect Luminescence From Subgrain Boundaries in Multicrystalline Silicon Wafers (2017) (13)
- The influence of nitrogen doping on the electrical and vibrational properties of Cu2O (2017) (13)
- Nanohole Structuring for Improved Performance of Hydrogenated Amorphous Silicon Photovoltaics. (2016) (13)
- Solar Cell Efficiency and High Temperature Processing of n-type Silicon Grown by the Noncontact Crucible Method (2016) (12)
- Dislocation Engineering in Multicrystalline Silicon (2009) (12)
- X-Ray Absorption Spectroscopy Study of Structure and Stability of Disordered (Cu $_{\bf 2}$ SnS $_{\bf 3}$ ) $_{\bf 1-x}$ (ZnS) $_{\bf x}$ Alloys (2015) (12)
- Economically sustainable scaling of photovoltaics to meet climate targets (2016) (12)
- Local melting in silicon driven by retrograde solubility (2013) (12)
- Enhanced iron gettering by short, optimized low-temperature annealing after phosphorus emitter diffusion for industrial silicon solar cell processing (2011) (12)
- Exceptional gettering response of epitaxially grown kerfless silicon (2016) (11)
- Increased Throughput and Sensitivity of Synchrotron-Based Characterization for Photovoltaic Materials (2017) (11)
- Analysis of loss mechanisms in Ag 2 ZnSnSe 4 Schottky barrier photovoltaics (2017) (11)
- Design of a Submillimeter Crack-Detection Tool for Si Photovoltaic Wafers Using Vicinal Illumination and Dark-Field Scattering (2018) (11)
- A path to 10% efficiency for tin sulfide devices (2014) (11)
- Dislocation-limited performance of advanced solar cells determined by TCAD modeling (2016) (11)
- Tetrahedrally coordinated disordered Cu2SnS3–Cu2ZnSnS4–ZnS alloys with tunable optical and electronic properties (2014) (11)
- Tuning Electrical, Optical, and Thermal Properties through Cation Disorder in Cu2ZnSnS4 (2019) (10)
- DISTRIBUTION AND FORMATION OF SILICON CARBIDE AND SILICON NITRIDE PRECIPITATES IN BLOCK-CAST MULTICRYSTALLINE SILICON (2005) (10)
- Physics-guided characterization and optimization of solar cells using surrogate machine learning model (2019) (10)
- Persistent and adaptive power system for solar powered sensors of Internet of Things (IoT) (2017) (10)
- Using automated serendipity to discover how trace water promotes and inhibits lead halide perovskite crystal formation (2021) (10)
- Tabula Rasa for n‐Cz silicon‐based photovoltaics (2018) (10)
- Defects in the deteriorated border layers of block-cast multicrystalline silicon ingots (2004) (10)
- Crack detection in crystalline silicon solar cells using dark-field imaging (2017) (10)
- Defect Redistribution by Low Temperature Annealing in Ingot Silicon Solar Cells (2008) (9)
- A Machine Learning and Computer Vision Approach to Rapidly Optimize Multiscale Droplet Generation. (2021) (9)
- Synchrotron‐based microprobe investigation of impurities in raw quartz‐bearing and carbon‐bearing feedstock materials for photovoltaic applications (2012) (9)
- Bayesim: A tool for adaptive grid model fitting with Bayesian inference (2018) (9)
- Bridging the gap between photovoltaics R&D and manufacturing with data-driven optimization (2020) (8)
- Ohmic shunts in two-terminal dual-junction solar cells with current mismatch (2017) (8)
- Three-Dimensional TCAD Modeling of Grain Boundaries in High-Efficiency Silicon Solar Cells (2016) (8)
- Metal grid contact design of four-terminal tandem solar cells (2017) (8)
- Assessing the Device-performance Impacts of Structural Defects with TCAD Modeling (2015) (8)
- Predicting Antimicrobial Activity of Conjugated Oligoelectrolyte Molecules via Machine Learning. (2021) (8)
- Economics of future growth in photovoltaics manufacturing (2015) (8)
- Lifetime spectroscopy investigation of light-induced degradation in p-type multicrystalline silicon PERC (2017) (8)
- Fast classification of small X-ray diffraction datasets using data augmentation and deep neural networks (2018) (8)
- Machine Learning and High-Throughput Robust Design of P3HT-CNT Composite Thin Films for High Electrical Conductivity (2020) (8)
- Applications of novel effects derived from Si ingot growth inside Si melt without contact with crucible wall using noncontact crucible method to high-efficiency solar cells (2017) (8)
- TCAD for PV: a fast method for accurately modelling metal impurity evolution during solar cell processing (2012) (8)
- A modeling framework for optimizing current density in four-terminal tandem solar cells: A case study on GaAs/Si tandem (2017) (8)
- Interactions Between Metals and Different Grain Boundary Types and Their Impact on Multicrystalline Silicon Device Performance (2006) (7)
- Design of domestic photovoltaics manufacturing systems under global constraints and uncertainty (2020) (7)
- Design approach for solar cell and battery of a persistent solar powered GPS tracker (2017) (7)
- Voltage- and flow-controlled electrodialysis batch operation: Flexible and optimized brackish water desalination (2020) (7)
- Distribution and Charge State of Iron Impurities in Intentionally Contaminated Lead Halide Perovskites (2018) (7)
- Enhanced charge carrier lifetime and mobility as a result of Rb and Cs incorporation in hybrid perovskite (2021) (7)
- The Impact of Global Warming on Silicon PV Energy Yield in 2100 (2019) (7)
- Measurement of contact resistivity at metal-tin sulfide (SnS) interfaces (2017) (6)
- Rapid and Accurate Thin Film Thickness Extraction via UV-Vis and Machine Learning (2020) (6)
- Intrinsic defect engineering of cuprous oxide to enhance electrical transport properties for photovoltaic applications (2014) (6)
- Accelerating synchrotron-based characterization of solar materials: Development of flyscan capability (2016) (6)
- Organic passivation of silicon through multifunctional polymeric interfaces (2017) (6)
- Illuminating the Mechanism for Sub-Bandgap Absorption in Chalcogen Doped Silicon Materials for PV Applications (2009) (6)
- Exceeding 3 ms Minority Carrier Lifetime in n-type Non-contact Crucible Silicon (2016) (6)
- The Impact of Dislocation Structure on Impurity Decoration of Dislocation Clusters in Multicrystalline Silicon (2013) (6)
- QUANTITATIVE STRESS MEASUREMENTS OF BULK MICRODEFECTS IN MULTICRYSTALLINE SILICON (2009) (6)
- An Open Combinatorial Diffraction Dataset Including Consensus Human and Machine Learning Labels with Quantified Uncertainty for Training New Machine Learning Models (2021) (5)
- Discovering equations that govern experimental materials stability under environmental stress using scientific machine learning (2021) (5)
- Utilization of Tabula Rasa to stabilize bulk lifetimes in n-Cz silicon for high-performance solar cell processing (2016) (5)
- Hole-mobility-limiting atomic structures in hydrogenated amorphous silicon (2014) (5)
- Assessing the defect responsible for LeTID: temperature- and injection-dependent lifetime spectroscopy (2017) (5)
- Oxygen migration enthalpy likely limits oxide precipitate dissolution during tabula rasa (2017) (5)
- Elucidating and engineering recombination-active metal-rich precipitates in n-type multicrystalline silicon (2014) (5)
- Effect of layer thickness on device response of silicon heavily supersaturated with sulfur (2016) (5)
- Sacrificial high-temperature phosphorus diffusion gettering process for lifetime improvement of multicrystalline silicon wafers (2014) (5)
- GaN/Cu2O Heterojunctions for Photovoltaic Applications (2014) (4)
- Finite- vs. infinite-source emitters in silicon photovoltaics: Effect on transition metal gettering (2016) (4)
- Dislocation density reduction in multicrystalline silicon via cyclic annealing (2015) (4)
- How changes in worldwide operating conditions affect solar cell performance (2021) (4)
- Proof-of-concept framework to separate recombination processes in thin silicon wafers using transient free-carrier absorption spectroscopy (2015) (4)
- Impact of H2S annealing on SnS device performance (2014) (4)
- How Much Physics is in a Current–Voltage Curve? Inferring Defect Properties From Photovoltaic Device Measurements (2019) (4)
- A Machine Learning and Computer Vision Approach to Rapidly Optimize Multiscale Droplet Generation (2021) (4)
- Seeding of silicon wire growth by out-diffused metal precipitates. (2011) (4)
- Environmental Stability of Crystals: A Greedy Screening (2022) (4)
- Light management in mechanically-stacked GaAs/Si tandem solar cells: Optical design of the Si bottom cell (2015) (4)
- Iron Management in Multicrystalline Silicon through Predictive Simulation: Point Defects, Precipitates, and Structural Defect Interactions (2013) (4)
- Synchrotron-based investigations of the nature and impact of iron contamination in multicrystalline silicon solar cell materials (2004) (4)
- Simulated co-optimization of crystalline silicon solar cell throughput and efficiency using continuously ramping phosphorus diffusion profiles (2012) (4)
- Representative identification of spectra and environments (RISE) using k‐means (2020) (4)
- Mechanically stacked and monolithically integrated perovskite/silicon tandems and the challenges for high efficiency (2015) (4)
- Thin absorbers for defect-tolerant solar cell design (2016) (4)
- Predictive Modeling of the Optimal Phosphorus Diffusion Profile in Silicon Solar Cells (2009) (4)
- Synchrotron-based investigations into metallic impurity distribution and defect engineering in multicrystalline silicon via thermal treatments (2005) (4)
- Dislocation density reduction during impurity gettering in multicrystalline silicon (2013) (3)
- Accelerated automated screening of viscous graphene suspensions with various surfactants for optimal electrical conductivity (2021) (3)
- The Impact of Fine Particular Matter (PM2.5) on Photovoltaic Energy Yield - A Study on the Example of New Delhi (2018) (3)
- Metal Grid Contact Design for Four-Terminal Tandem Solar Cells (2016) (3)
- Characterization of high-quality kerfless epitaxial silicon for solar cells: Defect sources and impact on minority-carrier lifetime (2018) (3)
- Opportunities for Machine Learning to Accelerate Halide Perovskite Commercialization and Scale-Up (2021) (3)
- Using atom probe tomography to understand Schottky barrier height pinning at the ZnO:Al / SiO2 / Si interface (2015) (3)
- Two-Step Annealing Study of Cuprous Oxide for Photovoltaic Applications (2015) (3)
- Semiconductor parameter extraction via current-voltage characterization and Bayesian inference methods (2018) (3)
- Design Concept for the In Situ Nanoprobe Beamline for the APS Upgrade (2018) (3)
- Electrically-inactive phosphorus re-distribution during low temperature annealing (2018) (3)
- Theoretical energy yield of GaAs-on-Si tandem solar cells (2014) (3)
- Analysis of CdTe photovoltaic cells for ambient light energy harvesting (2020) (3)
- Do grain boundaries matter? Electrical and elemental identification at grain boundaries in LeTID-affected $p$-type multicrystalline silicon (2017) (3)
- Preliminary Field Test Results From a Photovoltaic Electrodialysis Brackish Water Desalination System in Rural India (2018) (3)
- Sensitivity Analysis of Optical Metrics for Spectral Splitting Photovoltaic Systems: A Case Study (2015) (3)
- Extracting mobility-lifetime product in solar cell absorbers using quantum efficiency analysis (2015) (3)
- Quantitative Specifications to Avoid Degradation during E-Beam and Induced Current Microscopy of Halide Perovskite Devices (2020) (3)
- A robust low data solution: dimension prediction of semiconductor nanorods (2020) (3)
- Using Atom-Probe Tomography to Understand Zn O ∶ Al / Si O 2 / Si Schottky Diodes (2016) (3)
- Improved Cu 2 O-Based Solar Cells Using Atomic Layer Deposition to Control the Cu Oxidation State at the p-n Junction (2014) (3)
- A Physical Data Fusion Approach to Optimize Compositional Stability of Halide Perovskites (2020) (3)
- Application of X-ray synchrotron techniques to the characterization of the chemical nature and recombination activity of grown-in and process-induced defects and impurities in solar cells (2002) (2)
- Detection of ZnS phases in CZTS thin-films by EXAFS (2011) (2)
- Nanoprobe-XRF and micro-Raman Studies of Metal Impurity Decoration around Dislocations (2012) (2)
- Device impact of photon recycling and luminescent coupling on InGaP/Si tandems (2015) (2)
- Temperature- and intensity-dependent photovoltaic measurements to identify dominant recombination pathways (2016) (2)
- Physical mechanisms of in situ surface gettering of metals in ribbon silicon for solar cells (2007) (2)
- What Information is Necessary and Sufficient to Predict Materials Properties using Machine Learning? (2022) (2)
- Cage Molecules Stabilize Lead Halide Perovskite Thin Films (2022) (2)
- Silver-free Metallization Technology for Producing High Efficiency, Industrial Silicon Solar Cells (2018) (2)
- An Open-Source Environmental Chamber for Materials-Stability Testing Using an Optical Proxy (2023) (2)
- Best practices for the application of temperature- and illumination-dependent current density-voltage $J$($V$,$T$,$i$) and electron-beam induced current EBIC to novel thin film solar cells (2017) (2)
- Developing a web based PV simulation platform (targeting at machine learning combined with advanced device and process simulation to support process optimization) (2019) (2)
- Swirl defect investigation using temperature- and injection-dependent photoluminescence imaging (2016) (2)
- Principled Exploration of Bipyridine and Terpyridine Additives to Promote Methylammonium Lead Iodide Perovskite Crystallization (2022) (2)
- Band offsets of n-type electron-selective contacts on cuprous oxide (Cu[subscript 2]O) for photovoltaics (2014) (2)
- Combined Impact of Heterogeneous Lifetime and Gettering on Solar Cell Performance (2015) (2)
- Low-resistance earth-abundant metal contacts to nitrogen-doped cuprous oxide thin films (2012) (2)
- Optical loss analysis of four-terminal GaAs/Si tandem solar cells (2016) (2)
- Optical loss analysis of monolithic perovskite/Si tandem solar cell (2015) (2)
- Homogenization of Halide Distribution and Carrier Dynamics in Alloyed Organic-Inorganic Perovskites (2018) (2)
- Interplay of Grain Size, Crystal Orientation, and Performance in Mixedion Lead Halide Perovskite Films (2018) (2)
- Cost Analysis of Tandem Modules (2017) (2)
- Title : Nickel : A very fast diffuser in silicon (2015) (2)
- High-mobility copper (I) oxide thin films prepared by reactive dc magnetron sputtering for photovoltaic applications (2011) (2)
- Assessing the role of transition metals in shunting mechanisms using synchrotron-based techniques (2003) (2)
- Author Correction: How machine learning can help select capping layers to suppress perovskite degradation (2020) (2)
- Solid-state infrared-to-visible upconversion for sub-bandgap sensitization of photovoltaics (2018) (2)
- A next-generation in-situ nanoprobe beamline for the Advanced Photon Source (2013) (2)
- Swirl defect investigation using temperature- and injection-dependent photoluminescence imaging (2017) (2)
- Ultra-Thin GaAs Double-Junction Solar Cell With Carbon-Doped Emitter (2018) (2)
- Addressing adhesion and reliability concerns of copper-plated c-Si solar cells and modules (2016) (2)
- Detecting Microcracks in Photovoltaics Silicon Wafers using Varitional Autoencoder (2020) (2)
- Moving Beyond p-Type mc-Si: Quantified Measurements of Iron Content and Lifetime of Iron-Rich Precipitates in n-Type Silicon (2018) (2)
- An Energy Yield Calculator for Solar Cells Worldwide (2018) (2)
- Hyperdoped silicon sub-band gap photoresponse for an intermediate band solar cell in silicon (2014) (2)
- Phase-pure evaporation of tin (II) sulfide for solar cell applications (2014) (2)
- The Royal Society of t perovskite solar cells for tandems with silicon and CIGS † (2015) (2)
- 2.626 Fundamentals of Photovoltaics, Fall 2008 (2008) (2)
- Synchrotron-based characterization of solar cell nanodefects (2011) (1)
- Global Comparison of the Impact of Temperature and Precipitable Water on CdTe and Silicon Solar Cells (2017) (1)
- “Thin silicon solar cells: A path to 35% shockley-queisser limits”, a DOE funded FPACE II project (2014) (1)
- Modeling the size distribution of iron silicide precipitates in multicrystalline silicon (2012) (1)
- High-temperature diffusion processes in ultrafine-grained aluminum and its composites containing multi-walled carbon nanotubes (2015) (1)
- Rapid Imaging Tool for Residual Stress and Defect Quantification in MEMS and PV Applications (2013) (1)
- Density Functional Theory Calculations of the Role of Defects in Amorphous Silicon Solar Cells (2010) (1)
- Final Report: Thin Silicon Solar Cells - A Path to 35% Shockley-Queisser Limits (2014) (1)
- Erratum: “Transient terahertz photoconductivity measurements of minority-carrier lifetime in tin sulfide thin films: Advanced metrology for an early stage photovoltaic material” [J. Appl. Phys. 119, 035101 (2016)] (2016) (1)
- Dislocation density reduction limited by inclusions in kerfless high‐performance multicrystalline silicon (2015) (1)
- Performance of silicon solar cells under filtered spectra and different light intensities (2017) (1)
- Growth and p-type doping of cuprous oxide thin-films for photovoltaic applications (2012) (1)
- Sensitivity analysis for III–V/Si tandem solar cells: A theoretical study (2017) (1)
- Cost-Efficiency Trade-off of Silicon Solar Cells for use in Perovskite-Silicon Tandem Modules (2019) (1)
- Deployment of Impurity-to-Efficiency (I2E) simulation tool (2011) (1)
- Design criteria of GaAs on silicon tandem solar cells for terrestrial applications (2014) (1)
- Impurity-to-Efficiency Simulator: Predictive Simulation of Solar Cell Efficiencies Based on Measured Metal Distribution and Cell Processing Conditions (2010) (1)
- >1.8 millisecond effective lifetime in n-type silicon grown by the noncontact crucible method (2014) (1)
- a-Si/c-Si Heterojunction Solar Cells (2015) (1)
- Correlations between structural, impurity, and electrical properties in efficiency-limiting “defect bands” in string ribbon silicon (2005) (1)
- Device engineering towards improved tin sulfide solar cell performance and performance reproducibility (2016) (1)
- Synchrotron-based spectrally-resolved X-ray beam induced current : a technique to quantify the effect of metal-rich precipitates on minority carrier diffusion length in multicrystalline silicon (2005) (1)
- Technoeconomic Analysis of Photovoltaics Module Manufacturing with Thin Silicon Wafers (2019) (1)
- Identifying and comparing efficiency-loss mechanisms in earth-abundant thin-film solar cells (2013) (1)
- Knowledge-integrated machine learning for materials: lessons from gameplaying and robotics (2023) (1)
- Investigating the different degradation behavior of multicrystalline silicon PERC and Al-BSF solar cells (2018) (1)
- Distribution and Chemical State of Cu-rich Clusters in Silicon: Preprint (2004) (1)
- Fast Bayesian Optimization of Needle-in-a-Haystack Problems using Zooming Memory-Based Initialization (2022) (1)
- On Climate Change and Photovoltaic Energy Production (2019) (1)
- Economically sustainable growth of small-scale perovskite manufacturing in alternative PV markets (2019) (1)
- Flexible operation of photovoltaic electrodialysis (PV-ED) low-cost community-scale desalination systems (2019) (1)
- Synchrotron-based microanalysis of iron distribution after thermal processing and predictive modeling of resulting solar cell efficiency (2010) (1)
- The effect of embedded nanopillars on the built-in electric field of amorphous silicon p-i-n devices (2016) (1)
- Autonomous Optimization of Fluid Systems at Varying Length Scales (2021) (1)
- Differences and similarities between metal clusters in mc-Si materials from different manufacturers. (2004) (1)
- Analysis of different models of iron precipitation in multicrystalline silicon (2014) (1)
- Device engineering towards improved tin sulfide solar cell performance and performance reproducibility (2017) (1)
- Impact of iron contamination in multicrystalline silicon solarcells: origins, chemical states, and device impacts (2004) (1)
- Capping Layers Design Guidelines for Stable Perovskite Solar Cells via Machine Learning (2020) (1)
- Raman study of localized recrystallization of amorphous silicon induced by laser beam (2012) (1)
- Tandem solar cell cost relations (2016) (1)
- Simulating the Evolution of the Iron Content and Distribution during Solar Cell Processing (2009) (1)
- In-situ photoluminescence imaging for passivation-layer etching process control for photovoltaics (2014) (1)
- Fast-diffusing interstitial nickel in silicon (2013) (0)
- Oxygen-related defect characterization using correlative microscopy (2017) (0)
- 2015 Stress effects on the Raman spectrum of an amorphous material: theory and experiment on a-Si:H (2015) (0)
- Reply to Comment on “Environmental Stability of Crystals: A Greedy Screening” (2023) (0)
- Online Preconditioning of Experimental Inkjet Hardware by Bayesian Optimization in Loop (2021) (0)
- Transfer Learning for Rapid Extraction of Thickness from Optical Spectra of Semiconductor Thin Films (2022) (0)
- Optical loss analysis of four-terminal GaAs/Si tandem solar cells (2016) (0)
- Theoretical and Experimental Framework of an Insulator-to-Metal Transition in Selenium-Hyperdoped Silicon (2012) (0)
- The lifetime recovery puzzle in intermediate band materials: A new experimental approach (2012) (0)
- Correction to Precursor Concentration Affects Grain Size, Crystal Orientation, and Local Performance in Mixed-Ion Lead Perovskite Solar Cells (2019) (0)
- Fast-diffusing interstitial copper, iron and nickel in silicon (2013) (0)
- Quantitative residual stress imaging of multicrystalline, quasi-mono, and thin kerfless silicon wafers by infrared birefringence and sectioning (2014) (0)
- Does Energy Yield Increase when Conjoining a PV Module with a Thermoelectric Device? (2020) (0)
- Finite-vs. infinite-source emitters in silicon photovoltaics: Effect on transition metal gettering (2017) (0)
- In-situ stage development for high-temperature X-ray nanocharacterization of defects in solar cells (2013) (0)
- Incorporation of Fe into NiSi2 precipitates (2011) (0)
- Impact of defect type on hydrogen passivation effectiveness in multicrystalline silicon solar cells (2010) (0)
- Synchrotron-Based Investigation of Metal Impurity Diffusion in Silicon Solar Cell Materials (2009) (0)
- Microscopic Distribution of Luminescence from Dislocation Clusters in Multicrystalline Silicon Wafers (2017) (0)
- First-principles calculation of intrinsic defect chemistry and self-doping n PbTe (2018) (0)
- X-ray Microprobe Investigation of Iron During a Simulated Silicon Feedstock Extraction Process (2016) (0)
- Purity requirements for Silicon in PV applications (2016) (0)
- Tandem solar cell cost relations (2017) (0)
- Microprobe X-ray Absorption Spectroscopy of Chalcogen Doped Silicon (2009) (0)
- Identification of shunts in a monolithic multijunction GaAs/GaAs device by spectrometric characterization (2017) (0)
- Economics of Future Growth in Photovoltaics Manufacturing; NREL (National Renewable Energy Laboratory) (2015) (0)
- Introducing flexible perovskites to the IoT world using photovoltaic-powered wireless tags (2022) (0)
- Evaluating performance limiting defects in novel thin-film materials for solar cells (2015) (0)
- Purity requirements for silicon in photovoltaic applications (2016) (0)
- Sustainable Photovoltaics (2020) (0)
- Geometry-independent energy band simulator for radially symmetric diodes (2016) (0)
- Pilot Testing Cost- and Performance-Optimized Photovoltaic-Powered Electrodialysis Reversal Desalination Systems (2021) (0)
- Global sustainable silicon photovoltaics manufacturing: a technoeconomic, tariff and transportation framework with an applied case for Mexico (2018) (0)
- Discovering the Underlying Equations Governing Perovskite Solar-Cell Degradation Using Scientific Machine Learning (2020) (0)
- GaN/Cu[subscript 2]O Heterojunctions for Photovoltaic Applications (2014) (0)
- Effective iron gettering in lightly-doped emitters (2011) (0)
- Process-Induced Degradation Resistant n-Cz Wafers through Tabula Rasa Defect Engineering (2017) (0)
- Possible reasons for low open circuit voltage in pyrite (FeS$_2$) (2014) (0)
- High-lifetime kerfless silicon wafers (2014) (0)
- 2.627 / 2.626 Fundamentals of Photovoltaics, Fall 2011 (2011) (0)
- Optoelectronic Characterization of Impurity Supersaturated Silicon Junctions (2013) (0)
- Evolution of metal impurities during crystalline silicon solar cell processing (2008) (0)
- Dependence of Precipitation Behavior of Cu and Ni in CZ Multicrystalline Silicon on Cooling Conditions: Preprint (2004) (0)
- Recombination lifetimes in laser hyperdoped Si layers measured via microwave photoconductive decay (2013) (0)
- Tailoring capping-layer composition for improved stability of mixed-halide perovskites (2022) (0)
- Characterizing and evaluating the impact of dislocations and grain boundaries on silicon solar cells (2016) (0)
- Nano-XRF and micro-raman studies of metal impurity decoration around dislocations in multicrystalline silicon (2012) (0)
- Prediction and control of harmful point defects in thin film photovoltaics: Improving the performance of tin sulfide (2016) (0)
- Synchrotron-Based X-Ray Absorption Spectroscopy applied to Novel Silicon Solar Cell Material (2009) (0)
- Predicted outdoor energy yield of Si based tandem solar cells (2017) (0)
- Insulator-to-metal transition with deep-level impurities in silicon achieved by compensated hyperdoping (2013) (0)
- Global Design Aspects of Persistent and Autonomous PV Powered Systems (2017) (0)
- Machine Learning-based Classification of Spectral Conditions for High-Throughput Indoor Testing of Photovoltaic Modules (2019) (0)
- Energy yield evaluation for field operation of solar cells in Singapore: GaAs/GaAs tandem vs. GaAs single-junction solar cells (2017) (0)
- Incorporation of Fe into NiSi[subscript 2] precipitates (2011) (0)
- Improvement of minority-carrier lifetime in tin monosulfide via substrate engineering (2017) (0)
- Defect Engineering, Cell Processing, and Modeling for High-Performance, Low-Cost Crystalline Silicon Photovoltaics (2013) (0)
- Processing Induced Distinct Charge Carrier Dynamics of Bulky Organic Halide Treated Perovskites (2022) (0)
- Statistically meaningful data on the chemical state of iron precipitates in processed multicrystalline silicon using synchrotron-based x-ray absorption spectroscopy. (2004) (0)
- International Conference on Silicon Photovoltaics , SiliconPV 2015 Device architecture and lifetime requirements for high efficiency multicrystalline silicon solar cells (2015) (0)
- Report on Army Research Office Grant W911NF-10-1-0442 (Massachusetts Institute of Technology) (2012) (0)
- Distribution and Chemical State of Cu-rich Clusters in Silicon (2004) (0)
- Photovoltaic Testing for Energy Yield Predictions with Sensitivity to Spectral Shifts (2020) (0)
- Addressing adhesion and reliability concerns of copper-plated c-Si solar cells and modules (2017) (0)
- Structural Characterization of Optically Active Defects in Selenium-Doped Silicon (2010) (0)
- Insulator-to-metal transition with deep-level impurities in silicon achieved by compensated hyperdoping CHRISTIE SIMMONS, Massachusetts (2012) (0)
- Characterizing and evaluating the impact of dislocations and grain boundaries on silicon solar cells (2017) (0)
- Halide Homogenization and Cation Segregation in High Performance Perovskite Solar Cells (2019) (0)
- The Value of Efficiency (2020) (0)
- Investigating the influence of halide distribution on charge carrier dynamics in mixed-ion perovskite films (2019) (0)
- X-ray Absorption Spectroscopy on Hyper-Doped Silicon for High-Efficiency Photovoltaics (2010) (0)
- Spectral and Spatial Response of Sulfur-Hyperdoped n+/p Silicon Photodiodes (2012) (0)
- Improvement of minority-carrier lifetime in tin monosulfide via substrate engineering (2016) (0)
- Vision-driven Autocharacterization of Perovskite Semiconductors (2023) (0)
- Influence of organic cations on the structural anisotropy in cubic lead halide perovskites (2018) (0)
- Tabula Rasa: Oxygen precipitate dissolution though rapid high temperature processing in silicon (2017) (0)
- Toward defining tolerances for structural defects in silicon through 2D and 3D device simulations (2013) (0)
- Design of Photovoltaics-Based Manufacturing System Using Computer-Aided Design (2019) (0)
- The Effect of Tert-butylammonium Addition in Methylammonium Lead Iodide Perovskite Solar Cells (2019) (0)
- Stress engineering in amorphous silicon thin films (2011) (0)
- The distribution of chromium in multicrystalline silicon (2014) (0)
- Title : Analysis of Different Models of Iron Precipitation in Multicrystalline Silicon Year : 2014 Version : Post print (2015) (0)
- Voc impact of orientation-dependent x in anisotropic PV absorbers (2015) (0)
- Author Correction: Embedding physics domain knowledge into a Bayesian network enables layer-by-layer process innovation for photovoltaics (2020) (0)
- Pathway to predict solar cell efficiencies from as-grown multicrystalline silicon bricks (2014) (0)
- Annealing of Dislocations in Multicrystalline Silicon Solar Cell Material (2009) (0)
- Economic viability of thin-film tandem solar modules in the United States (2018) (0)
- Structural, Elemental, and Chemical Complex Defects in Silicon and Their Impact on Silicon Devices (2009) (0)
- Towards Monolithically Integrated GaAs on Si Tandem Solar Cell (2017) (0)
- Prediction and control of harmful point defects in thin film photovoltaics: Improving the performance of tin sulfide (2017) (0)
- Low Cost (CAPEX and variable): Tool design for cell and module fabrication with thin, free-standing silicon wafers (2020) (0)
- Process-to-panel modeling of a-Si/c-Si heterojunction solar cells (2015) (0)
- Thin Films: Organic Vapor Passivation of Silicon at Room Temperature (Adv. Mater. 14/2013) (2013) (0)
- Single crystal silicon hyperdoped with transition metals (2012) (0)
- The Search for Sub-Bandgap Optoelectronic Response in Silicon Hyperdoped with Gold (2013) (0)
- Vertically integrated modeling of light-induced defects: Process modeling, degradation kinetics and device impact (2018) (0)
- Perovskite Solar Cells for High-Efficiency Tandems (2017) (0)
- Guidelines for E-beam Induced Current Studies of Defects in Perovskite Solar Cells (2019) (0)
- Stress and temperature coupling effects on dislocation density reduction in multicrystalline silicon (2010) (0)
- Stress-Induced Nitrogen and Oxygen Segregation and Complexing Investigated by High Resolution Synchrotron FTIR: Preprint (2004) (0)
- FOR HIGH EFFICIENCY HETEROJUNCTION THIN FILM SOLAR CELLS (2009) (0)
- X-ray absorption spectroscopy to investigate the doping mechanism in amorphous Cu$_2$ZnSnS$_4$ thin films (2013) (0)
- Chemical and electronic structure of the heavily intermixed (Cd,Zn)S:Ga/CuSbS2 interface. (2022) (0)
- High speed growth of square-like Si single bulk crystals with a size of 23 × 23 cm2 for solar cells using the noncontact crucible method (2014) (0)
- Understanding the interplay between the crystal structure and charge transport in alloyed lead-free perovskites (2021) (0)
- Predictive Defect Science for Cost-Effective Photovoltaics (2011) (0)
- Structural Order and Thermodynamic Stability of Disordered Cu$_{2}$ZnSnS$_{4}$ Alloys (2014) (0)
- Does Covid-19 Impact Photovoltaics? (2020) (0)
- X-Ray Absorption Spectroscopy Study of Structure and Stability of Disordered (Cu $_{\bf 2}$SnS$_{\bf 3}$) $_{\bf 1-x}$(ZnS) (2015) (0)
- Inferring dislocation recombination strength in multicrystalline silicon via etch pit geometry analysis (2014) (0)
- Atomic-layer-deposited zinc-tin-oxide buffer layer for cuprous oxide thin film solar cells (2013) (0)
- Research data supporting "Strongly Enhanced Photovoltaic Performance and Defect Physics of Air-Stable Bismuth Oxyiodide (BiOI)" (2017) (0)
- Analysis of shunts in multicrystalline silicon solar cells using microprobe x-ray fluorescence technique (2002) (0)
- Predicting Synthesizability using Machine Learning on Databases of Existing Inorganic Materials (2023) (0)
- Tackling Data Scarcity with Transfer Learning: A Case Study of Thickness Characterization from Optical Spectra of Perovskite Thin Films (2022) (0)
- Photovoltaic energy yield predictions using satellite data (2020) (0)
- Deactivation of deep level impurities in hyperdoped silicon (2012) (0)
- Extracting Thin-film Optical Parameters from Spectrophotometric Data by Evolutionary Optimization (2021) (0)
- CHARACTERIZATION OF OXYGEN-RELATED DEFECTS IN SILICON USING CORRELATIVE MICROSCOPY (2017) (0)
- Toward an Impurity Band PV: Dynamics of Carriers Generated via Sub-band gap Photons (2013) (0)
- Optical Absorption Mechanisms in Sulfur Hyper-doped Silicon (2012) (0)
- Supersaturated Silicon-Chalcogen Alloys for Thin-film Photodetectors (2011) (0)
- Effect of growth temperature on carrier collection in SnS-based solar cells (2017) (0)
- Investigations of the Nature and Impact of Iron Contamination in Multicrystalline Silicon Solar Cell Materials (2005) (0)
- Carrier dynamics in sulfur-hyperdoped silicon studied by time-resolved terahertz spectroscopy (2014) (0)
- Extracting film thickness and optical constants from spectrophotometric data by evolutionary optimization (2022) (0)
- Decoupling surface- and bulk-limited lifetimes in 100-μm thin silicon using transient absorption pump-probe spectroscopy (2013) (0)
- Building intuition of iron evolution during solar cell processing through analysis of different process models (2015) (0)
- Novel X-Ray Tools for Characterization of "Solar Silicon" (2007) (0)
- 2-D and 3-D TCAD simulations of defect-tolerant solar cell architectures (2015) (0)
- Predicted outdoor energy yield of Si based tandem solar cells (2016) (0)
- Probing the Electronic Structure of Chalcogen Ultra-doped Silicon (2010) (0)
- Abstract Submitted for the MAR11 Meeting of The American Physical Society A Metal-Insulator Transition in Silicon Hyperdoped with Chalco- (2012) (0)
- Mitigating the "Iron Problem" in Crystalline Silicon Solar Cells (2008) (0)
- Application of x-ray fluorescence microprobe technique for the analysis of fully processed solar cells (2001) (0)
- Title Rapid Photovoltaic Device Characterization through Bayesian Parameter Estimation Permalink (2017) (0)
- Enhanced charge carrier lifetime in layered 2D hybrid perovskites (2019) (0)
- Stress effects on Raman spectroscopy of aSi:H -- theory and experiment (2015) (0)
- In situ PL imaging toward real-time plating process control (2014) (0)
- A Metal-Insulator Transition in Silicon Hyperdoped with Chalcogens (2011) (0)
- Metal grid contact design of four-terminal tandem solar cells (2017) (0)
This paper list is powered by the following services:
What Schools Are Affiliated With Tonio Buonassisi?
Tonio Buonassisi is affiliated with the following schools:
