Wim Desmet

Wim Desmet's AcademicInfluence.com Rankings

Wim Desmet

Engineering

#4161

World Rank

#5333

Historical Rank

Mechanical Engineering

#325

World Rank

#363

Historical Rank

Applied Physics

#947

World Rank

#971

Historical Rank

engineering Degrees

Download Badge

Engineering

Why Is Wim Desmet Influential?

(Suggest an Edit or Addition)

(See a Problem?)

Wim Desmet's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Works

A wave based prediction technique for coupled vibro-acoustic analysis (1998) (235)
Stable force identification in structural dynamics using Kalman filtering and dummy-measurements (2015) (161)
Multibody modelling of varying complexity for modal behaviour analysis of wind turbine gearboxes (2010) (146)
Trefftz-Based Methods for Time-Harmonic Acoustics (2007) (141)
On the potential of tuned resonators to obtain low-frequency vibrational stop bands in periodic panels (2013) (132)
A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation (2016) (110)
Application of the transmissibility concept in transfer path analysis (2010) (105)
An online coupled state/input/parameter estimation approach for structural dynamics (2015) (100)
A computationally efficient prediction technique for the steady-state dynamic analysis of coupled vibro-acoustic systems (2000) (100)
Active control of sound transmission through a double panel partition (1993) (96)
A reduced beam and joint concept modeling approach to optimize global vehicle body dynamics (2009) (95)
The wave based method: An overview of 15 years of research (2014) (93)
An efficient wave based prediction technique for plate bending vibrations (2007) (87)
OPAX: A new transfer path analysis method based on parametric load models (2011) (85)
Active sound quality control of engine induced cavity noise (2009) (83)
Insights in wind turbine drive train dynamics gathered by validating advanced models on a newly developed 13.2 MW dynamically controlled test-rig (2011) (77)
Interval fields to represent uncertainty on the output side of a static FE analysis (2013) (76)
A response surface based optimisation algorithm for the calculation of fuzzy envelope FRFs of models with uncertain properties (2008) (74)
Simplified modelling of joints and beam-like structures for BIW optimization in a concept phase of the vehicle design process (2009) (70)
A direct hybrid finite element – Wave based modelling technique for efficient coupled vibro-acoustic analysis (2011) (69)
Application of an efficient wave-based prediction technique for the analysis of vibro-acoustic radiation problems (2004) (67)
On the impact of damping on the dispersion curves of a locally resonant metamaterial: Modelling and experimental validation (2017) (64)
Development and validation of a three-dimensional ring-based structural tyre model (2009) (62)
Design and validation of metamaterials for multiple structural stop bands in waveguides (2017) (61)
Multibody element for spur and helical gear meshing based on detailed three-dimensional contact calculations (2013) (60)
A fuzzy finite element procedure for the calculation of uncertain frequency response functions of damped structures: Part 2—Numerical case studies (2005) (60)
Optimal Runge-Kutta schemes for discontinuous Galerkin space discretizations applied to wave propagation problems (2012) (60)
Modeling and analysis of wet friction clutch engagement dynamics (2015) (59)
On the acoustic radiation efficiency of local resonance based stop band materials (2014) (59)
Assessment of uncertainty on structural dynamic responses with the short transformation method (2005) (59)
A robust patch coupling method for NURBS-based isogeometric analysis of non-conforming multipatch surfaces (2017) (58)
On the use of a Wave Based prediction technique for steady-state structural-acoustic radiation analysis (2003) (58)
NEX-LMS: A novel adaptive control scheme for harmonic sound quality control (2010) (57)
On the analysis of vibro-acoustic systems in the mid-frequency range using a hybrid deterministic-statistical approach (2011) (56)
Measurement and analysis of rolling tire vibrations (2007) (55)
A Wave Based Method for the efficient solution of the 2D poroelastic Biot equations (2012) (54)
Probability that a band-gap extremum is located on the irreducible Brillouin-zone contour for the 17 different plane crystallographic lattices (2017) (54)
Dynamic mass based sound transmission loss prediction of vibro-acoustic metamaterial double panels applied to the mass-air-mass resonance (2019) (53)
Vibro-acoustic analysis procedures for the evaluation of the sound insulation characteristics of agricultural machinery cabins (2000) (53)
An isogeometric indirect boundary element method for solving acoustic problems in open-boundary domains (2017) (53)
The measurement of Gear Transmission Error as an NVH indicator: Theoretical discussion and industrial application via low-cost digital encoders to an all-electric vehicle gearbox (2018) (52)
An efficient Wave Based Method for solving Helmholtz problems in three-dimensional bounded domains (2011) (52)
The robustness of dynamic vehicle performance to spot weld failures (2006) (52)
Numerical dynamic analysis of uncertain mechanical structures based on interval fields (2011) (50)
A Trefftz-based numerical modelling framework for Helmholtz problems with complex multiple-scatterer configurations (2010) (49)
Vehicle state and tyre force estimation: demonstrations and guidelines (2021) (49)
A Coupled Finite Element–Wave Based Approach for the Steady-State Dynamic Analysis of Acoustic Systems (2001) (47)
The Dynamic Behavior Induced by Different Wind Turbine Gearbox Suspension Methods Assessed by Means of the Flexible Multibody Technique (2012) (47)
An efficient wave based prediction technique for dynamic plate bending problems with corner stress singularities (2009) (47)
A performance study of NURBS-based isogeometric analysis for interior two-dimensional time-harmonic acoustics (2016) (46)
Hybrid finite element-wave-based method for steady-state interior structural-acoustic problems (2005) (46)
Integrated structure and control design for mechatronic systems with configuration-dependent dynamics (2009) (46)
Curved Boundary Treatments for the Discontinuous Galerkin Method Applied to Aeroacoustic Propagation (2009) (45)
Application of fuzzy numerical techniques for product performance analysis in the conceptual and preliminary design stage (2008) (45)
A nonlinear parametric model reduction method for efficient gear contact simulations (2015) (44)
Interval and fuzzy dynamic analysis of finite element models with superelements (2007) (44)
Online state and input force estimation for multibody models employing extended Kalman filtering (2014) (43)
A multi-level wave based numerical modelling framework for the steady-state dynamic analysis of bounded Helmholtz problems with multiple inclusions (2010) (43)
Efficient Implementation of Tam and Auriault's Time-Domain Impedance Boundary Condition (2008) (43)
Interface reduction of flexible bodies for efficient modeling of body flexibility in multibody dynamics (2010) (43)
The wave-based substructuring approach for the efficient description of interface dynamics in substructuring (2010) (42)
Fuzzy finite element analysis based on reanalysis technique (2010) (42)
Model-based synthesis of aircraft noise to quantify human perception of sound quality and annoyance (2008) (40)
Characterization and Modeling of the Viscoelastic Behavior of a Self-Adhesive Rubber Using Dynamic Mechanical Analysis Tests (2015) (40)
Model for Predicting Drag Torque in Open Multi-Disks Wet Clutches (2014) (40)
An analytical model for accurate and numerically efficient tooth contact analysis under load, applied to face-milled spiral bevel gears (2018) (40)
Mechanical properties of diamond lattice Ti-6Al-4V structures produced by laser powder bed fusion: On the effect of the load direction. (2020) (39)
Experimental analysis of the structure-borne tyre/road noise due to road discontinuities (2009) (39)
CFL Conditions for Runge-Kutta discontinuous Galerkin methods on triangular grids (2011) (38)
The impact of damping on the sound transmission loss of locally resonant metamaterial plates (2019) (38)
Real-time flexible multibody simulation with Global Modal Parameterization (2012) (37)
A Generalized Corcos model for modelling turbulent boundary layer wall pressure fluctuations (2016) (37)
Isogeometric analysis for nonlinear planar pantographic lattice: discrete and continuum models (2019) (37)
Concurrent mechatronic design approach for active control of cavity noise (2008) (36)
Generalized inverse beamforming with optimized regularization strategy (2011) (35)
Wave propagation in locally resonant cylindrically curved metamaterial panels (2017) (35)
Computer-aided integrated design for machines with varying dynamics (2009) (35)
Damage detection in wind turbine blades by using operational modal analysis (2016) (34)
A fast frequency sweep approach using Padé approximations for solving Helmholtz finite element models (2013) (34)
Multibody model based estimation of multiple loads and strain field on a vehicle suspension system (2019) (34)
Mid-frequency vibro-acoustic modelling: challenges and potential solutions (2002) (34)
Design of Mechatronic Systems With Configuration-Dependent Dynamics: Simulation and Optimization (2007) (33)
An on-line time dependent parametric model order reduction scheme with focus on dynamic stress recovery (2014) (33)
On redundancy resolution and energy consumption of kinematically redundant planar parallel manipulators (2018) (32)
An Efficient Trefftz-Based Method for Three-Dimensional Helmholtz Problems in Unbounded Domains (2010) (32)
Adaptive model reduction technique for large-scale dynamical systems with frequency-dependent damping (2018) (32)
A novel design strategy for iterative learning and repetitive controllers of systems with a high modal density: Theoretical background (2010) (32)
Mathematical Model and Experimental Evaluation of Drag Torque in Disengaged Wet Clutches (2013) (32)
A Rapid Distortion Theory modified turbulence spectra for semi-analytical airfoil noise prediction (2016) (32)
Design and Experimental Validation of a Stable Two-Stage Estimator for Automotive Sideslip Angle and Tire Parameters (2017) (31)
Design and experimental validation of a metamaterial solution for improved noise and vibration behavior of pipes (2019) (31)
Isogeometric analysis for nonlinear planar Kirchhoff rods: Weighted residual formulation and collocation of the strong form (2018) (31)
The influence of flexibility within multibody modeling of multi-megawatt wind turbine gearboxes (2008) (31)
Analytical solution for free vibrations of rotating cylindrical shells having free boundary conditions (2017) (31)
Kalman-based load identification and full-field estimation analysis on industrial test case (2019) (31)
Semi-analytic contact technique in a non-linear parametric model order reduction method for gear simulations (2018) (30)
Active structural acoustic control of repetitive impact noise (2004) (30)
An overview of high-order finite difference schemes for computational aeroacoustics (2004) (29)
Metamaterial foam core sandwich panel designed to attenuate the mass-spring-mass resonance sound transmission loss dip (2020) (29)
Isogeometric collocation for Kirchhoff-Love plates and shells (2018) (29)
Time-Domain Impedance Formulation suited for Broadband Simulations (2007) (29)
A multichannel amplitude and relative-phase controller for active sound quality control (2014) (29)
Assessment of excitation mechanisms and structural flexibility influence in excitation propagation in multi-megawatt wind turbine gearboxes: Experiments and flexible multibody model optimization (2013) (29)
Modelling Techniques for Vibro-Acoustic Dynamics of Poroelastic Materials (2015) (28)
Virtual Prototyping for Sound Quality Design of Automobiles (2007) (28)
"MID-FREQUENCY" CAE Methodologies for Mid-Frequency Analysis in Vibration and Acoustics (2012) (28)
Distributed Observer and Controller Design for Spatially Interconnected Systems (2019) (28)
Parametric output-only identification of time-varying structures using a kernel recursive extended least squares TARMA approach (2018) (28)
Numerical identification of flow‐induced oscillation modes in rectangular cavities using large eddy simulation (2005) (28)
Vibration-based damage detection for a composite helicopter main rotor blade (2016) (28)
A flexible approach for coupling NURBS patches in rotationless isogeometric analysis of Kirchhoff-Love shells (2017) (28)
H2 optimal vibration control using inertial actuators and a comparison with tuned mass dampers (2014) (27)
Static modes switching in gear contact simulation (2013) (27)
Active control of repetitive transient noise (2007) (27)
The use of strain gauges in vibration-based damage detection (2015) (26)
Influence of boundary conditions on the stop band effect in finite locally resonant metamaterial beams (2020) (26)
Evaluation of substitution monopole models for tire noise sound synthesis (2010) (26)
A novel design strategy for iterative learning and repetitive controllers of systems with a high modal density: Application to active noise control (2010) (26)
Stability‐preserving model order reduction for time‐domain simulation of vibro‐acoustic FE models (2017) (25)
An efficient response surface based optimisation method for non-deterministic harmonic and transient dynamic analysis (2009) (25)
Improvement of the sound absorption of flexible micro-perforated panels by local resonances (2019) (25)
A Bloch wave reduction scheme for ultrafast band diagram and dynamic response computation in periodic structures (2018) (25)
Broadband Load Torque Estimation in Mechatronic Powertrains Using Nonlinear Kalman Filtering (2018) (25)
Active control of turbulent boundary layer-induced sound transmission through the cavity-backed double panels (2018) (24)
Hybrid Finite Element - Wave Based Method for acoustic problems (2003) (24)
Aerodynamic/Acoustic Splitting Technique for Computation Aeroacoustics Applications at Low-Mach Numbers (2008) (24)
A system‐level model reduction technique for the efficient simulation of flexible multibody systems (2011) (24)
A Trefftz based method for solving Helmholtz problems in semi-infinite domains (2012) (24)
Efficient treatment of stress singularities in poroelastic wave based models using special purpose enrichment functions (2011) (24)
Inertial force term approximations for the use of Global Modal Parameterization for planar mechanisms (2011) (24)
Finite element approach for simulating the dynamic mechanical behaviour of a chicken egg (2010) (23)
Calibration of the two microphone transfer function method with hard wall impedance measurements at different reference sections (2009) (23)
Vibro-acoustic design sensitivity analysis using the wave based method (2011) (23)
A multi-domain Fourier pseudospectral time-domain method for the linearized Euler equations (2012) (23)
On the influence of core laminations upon power transformer noise (2004) (23)
A Wave Based Method for the axisymmetric dynamic analysis of acoustic and poroelastic problems (2013) (23)
A fuzzy finite element analysis technique for structural static analysis based on interval fields (2010) (22)
A direct hybrid Finite Element – Wave Based Method for the steady-state analysis of acoustic cavities with poro-elastic damping layers using the coupled Helmholtz–Biot equations (2013) (22)
A parametric model order reduction technique for inverse viscoelastic material identification (2019) (21)
An efficient Wave Based Method for 2D acoustic problems containing corner singularities (2012) (21)
Development of an acoustic measurement protocol to monitor acetabular implant fixation in cementless total hip Arthroplasty: A preliminary study. (2017) (21)
Prediction of transmission, reflection and absorption coefficients of periodic structures using a hybrid Wave Based - Finite Element unit cell method (2018) (21)
Integrating structural and input design of a 2-DOF high-speed parallel manipulator: A flexible model-based approach (2010) (21)
Large Scale Validation of a Flexible Multibody Wind Turbine Gearbox Model (2015) (21)
Iliac-vein thrombosis after extracorporeal shock-wave lithotripsy. (1989) (20)
Advanced optimal sensor placement for Kalman-based multiple-input estimation (2021) (20)
Virtual microphone sensing through vibro-acoustic modelling and Kalman filtering (2018) (20)
A Hybrid Wave Based - Modally Reduced Finite Element Method for the Efficient Analysis of Low- and Mid-frequency Car Cavity Acoustics (2009) (20)
Numerical and experimental study of the effect of microslits on the normal absorption of structural metamaterials (2016) (20)
Analysis of tire/road noise caused by road impact excitations (2007) (20)
Static modes switching for more efficient flexible multibody simulation (2011) (20)
On the modelling of gear alignment errors in the tooth contact analysis of spiral bevel gears (2021) (20)
An efficient wave based approach for the time-harmonic vibration analysis of 3D plate assemblies (2013) (20)
Multiple target sound quality balance for hybrid electric powertrain noise (2018) (19)
Stable model order reduction for time-domain exterior vibro-acoustic finite element simulations (2017) (19)
Automated independent coordinates’ switching for the solution of stiff DAEs with the linearly implicit Euler method (2016) (19)
Some trends and challenges in wind turbine upscaling (2012) (19)
Gear noise evaluation through multibody TE-based simulations (2010) (19)
Time-Domain Impedance Formulation Based on Recursive Convolution (2006) (18)
Comparison of sirolimus eluting stent with bioresorbable polymer to everolimus eluting stent with permanent polymer in bifurcation lesions: Results from CENTURY II trial (2016) (18)
Mid-Frequency Methods in Sound and Vibration—Part A (2013) (18)
“Pedestrian in the loop”: An approach using virtual reality (2017) (17)
Acoustic analysis to monitor implant seating and early detect fractures in cementless THA: An in vivo study (2020) (17)
A Digital Twin for Operational Evaluation of Vertical Transportation Systems (2020) (17)
Noise, ill-conditioning and sensor placement analysis for force estimation through virtual sensing (2016) (17)
A wave-based substructuring approach for concept modeling of vehicle joints (2011) (17)
Multichannel feedforward control schemes with coupling compensation for active sound profiling (2017) (17)
On the prediction of near-field cavity flow noise using different CAA techniques (2004) (16)
Validating the modeling of sandwich structures with constrained layer damping using fractional derivative models (2016) (16)
A 3D discontinuous Galerkin method for aeroacoustic propagation (2005) (16)
Two-Port Indirect Acoustic Impedance Eduction in Presence of Grazing Flows (2011) (16)
An Adaptive Vehicle Sideslip Estimator for Reliable Estimation in Low and High Excitation Driving (2018) (16)
Frictional power loss in solid‐grease‐lubricated needle roller bearing (2013) (15)
An overview of experimental strain-based modal analysis methods (2014) (15)
Low-frequency extension of Amiet׳s theory for compact airfoil noise predictions (2016) (15)
Finite element method in acoustics (1999) (15)
Parametric dominant pole algorithm for parametric model order reduction (2014) (15)
Design of a resonant metamaterial based acoustic enclosure (2014) (15)
Realisation of a thermoformed vibro-acoustic metamaterial for increased STL in acoustic resonance driven environments (2019) (15)
Low-frequency dynamic analysis of automotive door weather-strip seals (2008) (15)
Exploiting input sparsity for joint state/input moving horizon estimation (2018) (14)
Dynamic characterization of wind turbine gearboxes using Order-Based Modal Analysis (2014) (14)
Acoustic source identification using a Generalized Weighted Inverse Beamforming technique (2012) (14)
Calibration of the two microphone transfer function method to measure acoustic impedance in a wide frequency range (2005) (14)
A wave based method to predict the absorption, reflection and transmission coefficient of two-dimensional rigid frame porous structures with periodic inclusions (2016) (14)
Coupling of Boundary Element and Wave Based Methods for the efficient solution of complex multiple scattering problems (2014) (14)
Dynamic modeling of car door weather seals: a first outline (2004) (14)
Parametric model order reduction without a priori sampling for low rank changes in vibro-acoustic systems (2019) (14)
Prediction of the sound field above a patchwork of absorbing materials. (2008) (14)
Increasing the accuracy of MDOF road reproduction experiments: calibration, tuning and a modified approach (2004) (14)
Using transfer path analysis to assess the influence of bearings on structural vibrations of a wind turbine gearbox (2015) (14)
A wave-based substructuring approach for fast modification predictions and industrial vehicle optimization (2006) (14)
On the assembly of Archimedean spiral cavities for sound absorption applications: Design, optimization and experimental validation (2021) (14)
Bloch theorem with revised boundary conditions applied to glide, screw and rotational symmetric structures (2017) (14)
Super-element global modal parameterization for efficient inclusion of highly nonlinear components in multibody simulation (2014) (13)
Subcomponent modelling of input parameters for statistical energy analysis by using a wave-based boundary condition (2010) (13)
Subsystem Global Modal Parameterization for efficient simulation of flexible multibody systems (2012) (13)
Indirect acoustic impedance determination in flow ducts using a two-port formulation. (2009) (13)
Active control of impact noise in a duct (2003) (13)
Global optimisation methods for poroelastic material characterisation using a clamped sample in a Kundt tube setup (2016) (13)
Three-dimensional ring model for the prediction of the tire structural dynamic behavior (2008) (13)
Preview control of a constrained hydraulic active suspension system (2012) (13)
Krylov subspaces recycling based model order reduction for acoustic BEM systems and an error estimator (2020) (13)
Structural Health Monitoring challenges on the 10-MW offshore wind turbine model (2015) (13)
A modified complex modal testing technique for a rotating tire with a flexible ring model (2015) (13)
Model-based condition monitoring of guiding rails in electro-mechanical systems (2019) (13)
Determination of replicate composite bone material properties using modal analysis. (2017) (13)
The dynamic bending analysis of plates under thermal load using an efficient wave-based method (2020) (13)
Flexible modelling of wind turbine gearboxes with special focus on shaft flexibilities (2010) (13)
Maximum-entropy methods for time-harmonic acoustics (2016) (13)
Experimental Characterization of Drag Torque in Open Multi-Disks Wet Clutches (2013) (12)
Experimental modal analysis of radial tires and the influence of tire modes on vehicle structure borne noise (2006) (12)
Reducing the impact of measurement errors in FRF-based substructure decoupling using a modal model (2018) (12)
Toward accurate hybrid prediction techniques for cavity flow noise applications (2009) (12)
Explicit and efficient topology optimization of frequency-dependent damping patches using moving morphable components and reduced-order models (2019) (12)
A State-Space Modeling Approach for Active Structural Acoustic Control (2009) (12)
Spline-based boundaries: A first step towards generic geometric domain descriptions for efficient mid-frequency acoustic analysis using the Wave Based Method (2011) (12)
Bloch theorem for isogeometric analysis of periodic problems governed by high-order partial differential equations (2016) (12)
An aerodynamic/acoustic splitting technique for hybrid CAA applications (2007) (12)
A direct hybrid finite element - wave based modelling technique for efficient analysis of poroelastic materials in steady-state acoustic problems (2016) (12)
Loose bolt detection in a complex assembly using a vibro-acoustic sensor array (2019) (12)
Prediction of flow induced vibration of a flat plate located after a bluff wall mounted obstacle (2019) (12)
Uncertain initial imperfections via probabilistic and convex modeling: Axial impact buckling of a clamped beam (2013) (12)
VIBRO-ACOUSTIC STUDY OF LIGHTWEIGHT COMPONENTS BASED ON A NEW EXPERIMENTAL SETUP (2011) (12)
A synthesis procedure for pass-by noise of automotive vehicles employing numerically evaluated source–receiver transfer functions (2013) (12)
On the applicability of static modes switching in gear contact applications (2012) (12)
Optimisation strategies for decentralized ASAC (2005) (12)
A flexible natural coordinates formulation (FNCF) for the efficient simulation of small‐deformation multibody systems (2018) (12)
Experimental Validation of Input Torque Balancing Applied to Weaving Machinery (2007) (12)
A validated virtual prototyping approach for avoiding wind turbine tonality (2013) (11)
A 2D Discontinuous Galerkin method for aeroacoustics with curved boundary treatment (2008) (11)
On the use of filtering techniques for hybrid methods in computational aero-acoustics (2006) (11)
Towards Accurate Flow and Acoustic Prediction Techniques for Cavity Flow Noise Applications (2005) (11)
A Novel Gear Test Rig with Adjustable Shaft Compliance and Misalignments Part I: Design (2014) (11)
Validation of a wave based technique for the analysis of a multi-domain 3D acoustic cavity with interior damping and loudspeaker excitation (2004) (11)
Fast frequency sweep method for indirect boundary element models arising in acoustics (2016) (11)
Concurrent simulation of mechatronic systems with variable mechanical configuration (2006) (11)
On the use of the Lorentzian function for the evaluation of the frequency averaged input power into plates (2012) (11)
The short transformation method to predict the FRF of dynamic structures subject to uncertainty (2004) (11)
NURBS-enhanced maximum-entropy schemes (2017) (11)
Equivalent force modeling of macro fiber composite actuators integrated into non-homogeneous composite plates for dynamic applications (2017) (11)
Installation and performance testing of a high frequency 6-DOF shaker table (2003) (11)
Optimal Magnetic Spring for Compliant Actuation – Validated Torque Density Benchmark (2019) (11)
K-space analysis of complex large-scale meta-structures using the Inhomogeneous Wave Correlation method (2020) (11)
Vibration-based fixation assessment of tibial knee implants: A combined in vitro and in silico feasibility study. (2017) (10)
CAE technologies for efficient vibro-acoustic vehicle design modification and optimization (2008) (10)
Application of the wave based method for the steady-state acoustic response prediction of a car cavity in the mid-frequency range (2002) (10)
On the use of the residue theorem for the efficient evaluation of band-averaged input power into linear second-order dynamic systems (2013) (10)
Numerical methodologies to predict the noise generation and propagation mechanisms in multiple expansion chambers (2008) (10)
Back-to-back comparison of impedance measurement techniques applied to the characterization of aero-engine nacelle acoustic liners (2016) (10)
Active noise control in agricultural machines (2002) (10)
Interval and fuzzy element analysis of mechanical structures with uncertain parameters (2004) (10)
Numerical evaluation of source–receiver transfer functions with the Fast Multipole Boundary Element Method for predicting pass-by noise levels of automotive vehicles (2012) (10)
Experimental acoustic identification of flow noise sources in expansion chambers (2008) (10)
Forward dynamical analysis of flexible multibody systems using system-level model reduction (2011) (10)
Strain-Based Dynamic Measurements and Modal Testing (2014) (10)
Deep learning for model order reduction of multibody systems to minimal coordinates (2021) (10)
Neural network based diagnosis of mechanical faults in IC engines (2012) (10)
A Wave Based approach for the dynamic bending analysis of Kirchhoff plates under distributed deterministic and random excitation (2015) (10)
Validation of a Real-Time Multibody Model for an X-by-Wire Vehicle Prototype Through Field Testing (2015) (10)
Aeroacoustic Noise Source Mechanisms in Simple Expansion Chambers (2006) (10)
Modal frequency and shape curvature as a measure of implant fixation: A computer study on the acetabular cup. (2018) (10)
A time-dependent parametric model order reduction technique for modelling indirect bearing force measurements (2015) (10)
Simulation and digital twin for mechatronic product design (2018) (10)
Hard real-time multibody simulations using ARM-based embedded systems (2016) (10)
Model based virtual intensity measurements for exterior vibro-acoustic radiation (2019) (10)
Guest EditorialMid-Frequency Methods in Sound and Vibration—Part B (2013) (10)
Artificial Neural Network Based Fault Diagnosis of IC Engines (2012) (10)
Vibro-acoustic Operational Modal Analysis using engine run-up data (2009) (9)
A simplified model of a rotating tire using cylindrical shells with free ends supported by an elastic foundation (2014) (9)
NVH optimization methodologies based on bead modification analysis in vehicle body design (2010) (9)
Determination of Acoustic Impedance for Helmholtz Resonators Through Incompressible Unsteady Flow Simulations (2016) (9)
Monopole and Dipole Identification Using Generalized Inverse Beamforming (2010) (9)
A semi-analytic strategy for the system-level modelling of flexibly supported ball bearings (2016) (9)
Finite element simulation of the dynamic behaviour of deep drawn components with accurate thickness description (2018) (9)
Multisine shock and vibration testing using a high-frequency 6-DOF shaker table (2003) (9)
Combining multibody and acoustic simulation models for wind turbine gearbox NVH optimisation (2012) (9)
Numerical Comparison of Different Equivalent Source Models and Source Quantification Techniques for Use in Sound Synthesis Systems (2011) (9)
Fast multipole BEM modeling of head releated transfer functions of a dummy head and torso (2010) (9)
Vibro-acoustic finite element analysis of the Brazilian vehicle satellite launcher fairing (2002) (9)
Optimized inclusion of flexibility in wind turbine gearbox multibody model in view of model updating on dynamic test rig (2010) (9)
Panel method for turbulence-airfoil interaction noise prediction (2012) (9)
Identification of the direction and value of the wave length of each mode for a rotating tire using the phase difference method (2016) (9)
A SYSTEM-LEVEL MODEL REDUCTION TECHNIQUE FOR EFFICIENT SIMULATION OF FLEXIBLE MULTIBODY DYNAMICS (2009) (9)
A wave-based optimization framework for 1D and 2D periodic structures (2020) (9)
A Trefftz-based prediction technique for multi-domain steady-state acoustic problems (2003) (9)
An experimental-numerical study on the vibro-acoustic characterization of honeycomb lightweight panels (2010) (9)
Obtaining manufactured geometries of deep-drawn components through a model updating procedure using geometric shape parameters (2018) (9)
Automated misfire diagnosis in engines using torsional vibration and block rotation (2012) (9)
A CAE modelling approach for the analysis of vibro-acoustic systems with distributed ASAC control (2006) (9)
Contact Versus Non-Contact Measurement of a Helicopter Main Rotor Composite Blade (2010) (9)
Efficient vibro-acoustic identification of boundary conditions by low-rank parametric model order reduction (2018) (8)
Development of a numerical modelling methodology for the NVH behaviour of elastomeric line connections (2006) (8)
The Use of Fiber Bragg Grating Sensors for Strain Modal Analysis (2015) (8)
A Novel TPA Method Using Parametric Load Models: Validation on Experimental and Industrial Cases (2009) (8)
The design of Helmholtz resonator based acoustic lenses by using the symmetric Multi-Level Wave Based Method and genetic algorithms (2014) (8)
A system engineering approach for the design optimization of a hydraulic active suspension (2009) (8)
Flow and geometrical effects on radiated noise from exhaust pipes computed by the Fourier pseudospectral time-domain method (2015) (8)
Acoustic simulation of cavities with porous materials using an adaptive model order reduction technique (2020) (8)
The fuzzy FE approach to assess the uncertain static response of an industrial vehicle (2006) (8)
Formulation and validation of the shift cell technique for acoustic applications of poro-elastic materials described by the Biot theory (2021) (8)
Increasing the accuracy of MDOF road reproduction experiments : Experimental validation (2005) (8)
The impact of resonant additions’ footprint on the stop band behavior of 1D locally resonant metamaterial realizations (2021) (8)
Simulation of in-plane vibrations of 2D structural solids with singularities using an efficient wave based prediction technique (2012) (8)
Flow and geometrical effects on radiated noise from exhausts computed by an hybrid extended Fourier PSTD method (2011) (8)
Vibro-acoustic Analysis of the Brazilian Vehicle Satellite Launcher ( VLS ) fairing (2002) (8)
Application of the wave based prediction technique for the analysis of the coupled vibro-acoustic behaviour of a 3D cavity (2002) (8)
Development and validation of a fully predictive high-fidelity simulation approach for predicting coarse road dynamic tire/road rolling contact forces (2019) (8)
Study of the vibro-acoustic behaviour of composite sandwich structures by means of a novel test setup (2012) (7)
Combined Numerical and Experimental Study of a Slit Resonator Under Grazing Flow (2014) (7)
Boundary element method in acoustics (1999) (7)
A coupled finite element - wave based approach for the steady-state dynamic analysis of coupled structural-acoustic systems (2002) (7)
Vibroacoustics of periodic media: Multi-scale modelling and design of structures with improved vibroacoustic performance (2020) (7)
On the performance of the quadrature-free discontinuous Galerkin method on Hexahedral and Tetrahedral grids for the linearized Euler equations (2008) (7)
Contact mechanics with maximum-entropy meshfree approximants blended with isogeometric analysis on the boundary (2017) (7)
On the influence of frequency-dependent elastic properties in vibro-acoustic modelling of porous materials under structural excitation (2014) (7)
Transmitted power and energy flow behavior of degrading wet friction clutches (2012) (7)
Random field expansion with interval correlation length using interval fields (2011) (7)
A hybrid Boundary Element-Wave Based Method for an efficient solution of bounded acoustic problems with inclusions (2015) (7)
A three-level non-deterministic modeling methodology for the NVH behavior of rubber connections (2010) (7)
A State-Input Estimation Approach for Force Identification on an Automotive Suspension Component (2016) (7)
GENERALIZED INVERSE BEAMFORMING INVESTIGATION AND HYBRID ESTIMATION (2010) (7)
Active control of turbulent boundary layer sound transmission into a vehicle interior (2016) (7)
An efficient wave based method for the mid-frequency transverse vibration analysis of a thermal beam with interval uncertainties (2021) (7)
Reduced-Order-Model Interpolation for use in Global Modal Parameterization (2010) (7)
Reproduction of dynamic load cases on a 13.2 MW test facility for wind turbine gearboxes (2010) (7)
DAMPING ANALYSIS WITH RESPECT TO ROLLING SPEED BY ANALYTIC SOLUTION OF A FLEXIBLE RING MODEL AND ITS FREQUENCY RESPONSE FUNCTION DERIVATION BY MODAL SUMMATION METHOD (2014) (7)
Introduction to numerical acoustics (1999) (7)
Model-based, multi-material topology optimization taking into account cost and manufacturability (2020) (7)
Static Modes Switching: On-Line Variable Static Augmentation for Efficient Flexible Multibody Simulation (2011) (7)
Vibro-Acoustic Characterisation of Lightweight Structures: A Numerical-Experimental Approach (2012) (7)
A review of the wave based prediction technique for efficient interior acoustic analysis (2005) (7)
Structural Health Monitoring strategies based on the estimation of modal parameters (2017) (7)
Large Eddy Simulation for Computation of Aeroacoustic Sources in 2D-Expansion Chambers (2006) (6)
Active control of impact noise of punching machines (2005) (6)
Experimental modal analysis of radial tires under different boundary conditions (2006) (6)
5‐Year clinical follow‐up of the COBRA (complex coronary bifurcation lesions: Randomized comparison of a strategy using a dedicated self‐expanding biolimus A9‐eluting stent vs. a culotte strategy using everolimus‐eluting stents) study (2018) (6)
Pedestrian in the loop: An approach using augmented reality (2018) (6)
A wave based prediction technique following a Trefftz approach: a possible solution to the mid-frequency modelling challenge in acoustics and vibration? (2009) (6)
On the use of the wave based method for the steady-state dynamic analysis of three dimensional plate assemblies (2004) (6)
Microscale material variability and its effect on longitudinal tensile failure of unidirectional carbon fibre composites (2020) (6)
On the multi-scale vibroacoustic behavior of multi-layer rectangular core topology systems (2020) (6)
Characterisation of viscoelastic layers in sandwich lightweight panels through inverse techniques (2015) (6)
Reducing Vehicle Interior NVH by Means of Locally Resonant Metamaterial Patches on Rear Shock Towers (2019) (6)
Predicting fatigue life of metal LPBF components by combining a large fatigue database for different sample conditions with novel simulation strategies (2021) (6)
Dynamic Response of a Multi-Megawatt Wind Turbine Drivetrain Under Voltage Dips Using a Coupled Flexible Multibody Approach (2013) (6)
Flow noise prediction of confined flows using synthetic turbulence and linearized Euler equations in a hybrid methodology (2013) (6)
Assessment of different parameters used in the SNGR method (2004) (6)
Robust aeroacoustic computations based on Curle's and Powell's analogies (2008) (6)
Simplified exhaust pipe noise radiation modelling using the Fourier PSTD method (2010) (6)
Review: Fast approximation of synthesized frequency response functions with automated multi-level substructuring (AMLS) (2011) (6)
Transmission suite design for vibro-acoustic characterization of lightweight panels (2010) (6)
A wave-based sub-structuring approach for fast vehicle body optimisation (2007) (6)
On the use of an FE based energy flow post-processing method for vehicle structural dynamic analysis (2008) (6)
Sound transmission of finite double-panel partitions with sound absorbing material and panel stiffeners (1995) (6)
The Influence of Flow Domain Modeling on the Accuracy of Direct and Hybrid Aeroacoustic Noise Calculations (2006) (6)
Vehicle suspension and structure borne road noise testing on a 6-DOF high frequency shaker table: first outlines (2004) (6)
Multi‐expansion modal reduction: A pragmatic semi–a priori model order reduction approach for nonlinear structural dynamics (2019) (6)
On the use of a wave based prediction technique for vehicle interior acoustics (2001) (6)
Virtual sensing of wheel center forces by means of a linear state estimator (2016) (6)
Optimal dynamic vibration absorber design for minimizing the band-averaged input power using the residue theorem (2015) (6)
Improved human-computer interaction for mechanical systems design through augmented strain/stress visualisation (2017) (6)
Uncertainty assessment in random field representations: An interval approach (2011) (6)
Simulation of pass-by noise of automotive vehicles in the mid-frequency range using Fast Multipole BEM (2010) (6)
A biomechanical testing system to determine micromotion between hip implant and femur accounting for deformation of the hip implant: Assessment of the influence of rigid body assumptions on micromotions measurements (2017) (6)
Computer assisted mechanics and engineering sciences (2008) (6)
Accurate interfacing schemes for the coupling of CFD data with high order DG methods for aeroacoustic propagation (2014) (6)
Development of a Novel Test Setup for Validation of Virtual Sensing on Mechatronic Drivetrains (2016) (5)
Acoustic Characterization of a Helmholtz Resonator Under Grazing Flow Conditions Using a Hybrid Methodology (2013) (5)
Use of concept modelling for online input force estimation (2014) (5)
A Novel Gear Test Rig with Adjustable Shaft Compliance and Misalignments. Part II: Instrumentation (2014) (5)
Uncertainty-based design in automotive and aerospace engineering (2007) (5)
Impact of the Unit Cell Choice on the Efficiency of Dispersion Curve Calculations Using Generalized Bloch Mode Synthesis (2021) (5)
The use of strain and mixed strain/acceleration measurements for modal analysis (2014) (5)
Structural coupling and non-linear effects in the experimental modal analysis of a precision gear test rig (2014) (5)
Active control of the sound transmission through a double-glazing window (1996) (5)
Accurate CAA-Simulations using a Low-Mach Aerodynamic/Acoustic Splitting Technique (2009) (5)
On the coupling of wave based models with modally reduced finite models for structural-acoustic analysis (2006) (5)
Interval and Fuzzy Finite Element Analysis of mechanical structures with uncertain parameters (2004) (5)
An INverse COnvolution MEthod for wavenumber extraction (INCOME): Formulations and applications (2021) (5)
A direct hybrid finite element- wave based prediction technique for the steady-state dynamic analysis of twe-dimensional solids (2005) (5)
Measurement of the Tire Dynamic Transfer Stiffness at Operational Excitation Levels (2010) (5)
A simplified tire model based on a rotating shell (2015) (5)
A direct hybrid wave based – finite element modeling of poroelastic materials (2011) (5)
Numerical case study on the development of acoustic equivalent source models for use in sound synthesis methods (2008) (5)
A refined use of the residue theorem for the evaluation of band-averaged input power into linear second-order dynamic systems (2014) (5)
Experimental validation of numerical structural dynamic models for metal plate joining techniques (2018) (5)
Study of honeycomb panels with local cell resonators to obtain low-frequency vibrational stopbands (2012) (5)
Development of an Instrument to Assess the Stability of Cementless Femoral Implants Using Vibration Analysis During Total Hip Arthroplasty (2021) (5)
Multichannel Active Sound Quality Control for Independent-Channel Sound Profiling (2015) (5)
Validation of the wave based technique for the analysis of 2D steady-state acoustic radiation problems (2007) (5)
Efficient wave based models for acoustic scattering and transmission problems using point source and plane wave excitation (2007) (5)
An Automatic Krylov subspaces Recycling technique for the construction of a global solution basis of non-affine parametric linear systems (2021) (5)
Gear Dynamics Characterization by Using Order-Based Modal Analysis (2016) (5)
Indirect acoustic impedance eduction in presence of flow based on an analytical two-port formulation (2014) (5)
Structure-preserving low-order modeling approach of laminated composite plates integrated with macro-fiber composite transducers for dynamic applications (2019) (5)
Coordinate transformation techniques for efficient model reduction in flexible multibody dynamics (2008) (5)
Best Practices for Using Order-Based Modal Analysis for Industrial Applications (2017) (5)
Output-only recursive identification of time-varying structures using a Gaussian process regression TARMA approach (2016) (5)
A comparison between an indirect Trefftz method and the finite-element method for solving coupled vibro-acoustic problems. (1999) (5)
Dynamic Metamaterials for Structural Stopband Creation (2016) (5)
Global plate vibration reduction using a periodic grid of vibration absorbers (2012) (5)
wave based modelling methods for steady-state interior acoustics: an overview (2006) (5)
The Use of a Vibro-Acoustic Based Method to Determine the Composite Material Properties of a Replicate Clavicle Bone Model (2020) (5)
An integrated simulation approach for the design and analysis of complex mechatronic systems (2014) (5)
A robust approach for substructure decoupling (2014) (4)
Vehicle road noise prediction using component-based transfer path analysis from tire test-rig measurements on a rolling tire (2021) (4)
Experimental analysis of the aerodynamic noise generating mechanisms in simple expansion chambers (2008) (4)
Camera-based experimental modal analysis with impact excitation: Reaching high frequencies thanks to one accelerometer and random sampling in time (2022) (4)
Optimal integrated design procedure for ASAC (2006) (4)
Aeroacoustic sources identification using generalized inverse beamforming (2010) (4)
Experimental Two-Port Characterization of the Aeroacoustic Transmission Properties of a Truck's Exhaust System (2012) (4)
On the coupling of wave based models with modally reduced finite element models for 3D interior acoustic analysis (2008) (4)
Closed-loop design for hybrid powertrains (2017) (4)
Deep learning of multibody minimal coordinates for state and input estimation with Kalman filtering (2021) (4)
Comparison of numerical prediction techniques for sound propagation in complex outdoor environments (2008) (4)
Multi-axial road load reproductions for the durability assessment of lightweight stainless steel exhaust systems (2008) (4)
Computer-aided analysis of rigid and flexible multibody systems (2007) (4)
Order Based Modal Analysis Versus Standard Techniques to Extract Modal Parameters of Operational Wind Turbine Gearboxes (2015) (4)
A database framework for industrial vehicle body concept modelling (2010) (4)
Model-Based Synthesis of Aircraft Noise to Quantify the Subjective Human Perception (2006) (4)
Computer-aided integrated design for mechatronic systems with varying dynamics (2009) (4)
An adaptive Kriging based optimisation altorithm for interval and fuzzy FRF analysis (2008) (4)
An isogeometric indirect boundary element method for Helmholtz problems (2014) (4)
On the use of a hybrid wave based-statistical energy approach for the analysis of vibro-acoustic systems in the mid-frequency range (2010) (4)
Diffusion based homogenization method for 1D wave propagation (2020) (4)
Parameter Identification on Flexible Multibody Models Using the Adjoint Variable Method and Flexible Natural Coordinate Formulation (2020) (4)
Virtual sensing on mechatronic drivetrains using multiphysical models (2015) (4)
A WAVE BASED PREDICTION TECHNIQUE FOR THE STEADY-STATE DYNAMIC ANALYSIS OF FLAT PLATE ASSEMBLIES (2004) (4)
Sensor Selection and State Estimation for Unobservable and Non-Linear System Models (2021) (4)
Operational Modal Analysis of a rotating tyre subject to cleat excitation (2011) (4)
Force Isolation by Locally Resonant Metamaterials to Reduce NVH (2018) (4)
Magnetic Springs: Fast Energy Storage for Reciprocating Industrial Drivetrains (2015) (4)
Vibrational techniques to assess the stability of spherical press-fitted implants : preliminary results (2010) (4)
Interval fields: Capturing spatial uncertainty within a non-probabilistic framework (2014) (4)
Application of Interval Fields for Uncertainty Modeling in a Geohydrological Case (2013) (4)
A Discrete-Time Extended Kalman Filter Approach Tailored for Multibody Models: State-Input Estimation (2021) (4)
A 3D discontinuous Galerkin method for acoustic propagation in duct flows (2005) (4)
Numerical study of noise generation mechanisms in rectangular cavities (2005) (4)
A matrix-free Model Order Reduction scheme for vibro-acoustic problems with complex damping treatments (2016) (4)
Hybrid finite element - wave based method for steady-state acoustic analysis (2004) (4)
Iterative learning control for an active exhaust noise attenuation valve for internal combustion engines (2009) (4)
Bézier tilings of the sphere and their applications in benchmarking multipatch isogeometric methods (2017) (4)
Application of a hybrid finite element - Trefftz approach for acoustic analysis (2005) (4)
Performance of a wave based prediction technique for three-dimensional coupled vibro-acoustic analysis (1998) (4)
Reduced-Order Robust Controller Design for Vibration Reduction (2016) (4)
Test setup for tire/road noise caused by road impact excitations (2006) (4)
Multibody modelling of shuttling excitation in spur and helical geared transmissions (2012) (4)
Effects of variable loads and misalignments on gear noise and vibration through multibody simulation based on transmission error (2011) (4)
A procedure to restore measurement induced violations of reciprocity and passivity for FRF-based substructuring (2022) (4)
Automatic model order reduction for systems with frequency-dependent material properties (2022) (4)
On the coupling of Wave Based models with modally reduced Finite Element models for structural-acoustic analysis (2006) (4)
A novel wave based prediction technique for the efficient dynamic modelling of poro-elastic materials (2009) (4)
A parametric model order reduction technique for poroelastic finite element models. (2017) (4)
Application of the wave based method for the calculation of structural intensity and power flow in plates (2008) (4)
Experimental validation of the wave based prediction technique for the analysis of the coupled vibro-acoustic behavior of a 3D cavity (2003) (4)
A Trefftz-based prediction technique for the steady-state dynamic analysis of coupled plates (1999) (4)
Order-Based Modal Analysis: a modal parameter estimation technique for rotating machineries (2015) (4)
Model Based System Testing: Bringing Testing and Simulation Close Together (2016) (4)
Validation of a dedicated test set-up for boundary excitation of trim assemblies (2012) (4)
CAE-based Design of Active Noise Control Solutions (2007) (4)
Sound transmission loss of a locally resonant metamaterial using the hybrid wave based — Finite element unit cell method (2017) (4)
Self-tuneable velocity feedback for active isolation of random vibrations in subcritical two degree of freedom systems (2015) (4)
An explicit Wave based model as alternative to the DtN map for solving unbounded Helmholtz problems with the finite element method (2015) (4)
The Wave Based Method (2012) (4)
Application of the Wave Based Method for mid-frequency analysis on a room acoustics case (2010) (4)
Computational aeroacoustic characterization of different orifice geometries under grazing flow conditions (2012) (4)
Multi-port Characterization of a Modal Filter Containing Micro-perforated Panels (2016) (4)
In-vivo vascular healing following bifurcation interventions with the Absorb bioresorbable vascular scaffold. (2019) (4)
ON THE POTENTIAL OF LOCAL RESONATORS TO OBTAIN LOW-FREQUENCY BAND GAPS IN PERIODIC LIGHTWEIGHT STRUCTURES (2011) (4)
An extended Kalman filter approach for augmented strain/stress visualization in mechanical systems (2014) (3)
Auralisation of a car pass-by behind a low finite-length vegetated noise barrier (2012) (3)
Influence of Propagation Equations on the Scatter Matrix for Ducts Carrying Non-Uniform Mean Flow (2010) (3)
On the determination of fully conjugate hypoid tooth flanks (2020) (3)
Dynamic stress analysis of the high-speed stage of a wind turbine gearbox using a coupled flexible multibody approach (2015) (3)
Time-domain impedance boundary conditions for acoustic reduced order finite element simulations (2021) (3)
Airfoil noise prediction from 2D3C PIV data (2015) (3)
New insights of an energy flow visualization into vehicle design (2010) (3)
Deep Learning of (Periodic) Minimal Coordinates for Multibody Simulations (2020) (3)
A study of vibro-acoustic behaviour variation of thin sheet metal components manufactured through deep drawing process (2019) (3)
Numerical study of the acoustic response of a single orifice with turbulent mean fllow (2015) (3)
A wave based prediction technique for coupled structural-acoustic radiation problems (2002) (3)
Benchmarking of finite-difference time-domain method and fast multipole boundary element method for room acoustics (2022) (3)
Observer-Based Distributed Controllers Design for a Cantilever Beam (2016) (3)
Modeling viscoelastic damping insertion in lightweight structures with generalised Maxwell and fractional derivative models (2014) (3)
Sensor selection for cost-effective virtual torque measurements on a wind turbine gearbox (2021) (3)
Low frequency tyre noise mitigation in a vehicle using metal 3D printed resonant metamaterials (2022) (3)
Implications of Nonsub-Wavelength Resonator Spacing on the Sound Transmission Loss Predictions of Locally Resonant Metamaterial Partitions (2020) (3)
A novel prediction technique for coupled structural-acoustic radiation problems (2000) (3)
Predicting vibration levels on an experimental test case by using invariant loads (e.g. blocked forces) as source characterization (2018) (3)
Combined experimental-numerical characterisation of the vibro-acoustic properties of lightweight panels (2012) (3)
Model Based Actuator Management for a Hydraulic Active Suspension System: Improving Comfort Performance by Advanced Control (2011) (3)
Acoustic source identification in a t-joint at low mach numbers (2010) (3)
A combined 1D-3D simulation approach for the energy analysis of a high speed weaving machine (2012) (3)
Updated wind turbine gearbox multibody model with optimized flexible housing to deliver inputs for acoustic calculations (2011) (3)
On the use of a panel contribution analysis for the characterization of vehicle static and dynamic stiffness properties (2007) (3)
Monday, 27 August 2012 (2012) (3)
Dynamic Performance of a Squeeze Film Damper with a Cylindrical Roller Bearing under a Large Static Radial Loading Range (2019) (3)
Dynamic Performance of an Oil Starved Squeeze Film Damper Combined With a Cylindrical Roller Bearing. (2019) (3)
Non-probabilistic Uncertainty Assessment in Finite Element Models with Superelements (2006) (3)
A novel modelling approach for sound propagation analysis in a multiple scatterer environment (2008) (3)
Active structural acoustic control of impact noise (2004) (3)
Model order reduction for the transient vibro-acoustic simulation of acoustic guitars (2016) (3)
A wave based prediction technique for the dynamic response analysis of plates with random point mass distributions (2008) (3)
Development and embedded deployment of a virtual load sensor for wind turbine gearboxes (2020) (3)
A Three-Dimensional Ring-Based Structural Tyre Model: Development and Validation (2009) (3)
A hybrid wave based vibro-acoustic modelling technique for the prediction of interior noise in an aircraft fuselage (2006) (3)
A wave based prediction technique for the steady-state dynamic analysis of three-dimensional plate structures (2003) (3)
A Machine Learning Approach for Minimal Coordinate Multibody Simulation (2019) (3)
Finite Volume Convective Flux Reconstruction using High-Order Skew-Symmetric-like Schemes (2007) (3)
A system level model reduction approach for flexible multibody systems with parametric uncertainties (2015) (3)
Insights in multimegawatt wind turbine gearbox dynamics using a validated multibody modeling approach (2009) (3)
Applications of an isogeometric indirect boundary element method and the importance of accurate geometrical representation in acoustic problems (2020) (3)
Reverberation time and audibility in phased geometrical acoustics using plane or spherical wave reflection coefficients. (2019) (3)
Expansion of a random field with interval correlation length using interval fields (2011) (3)
Investigating the use of reduction techniques in concept modeling for vehicle body design optimization (2010) (3)
Iterative procedure for accurate plane wave decomposition in flow ducts (2014) (3)
An experimental procedure for the determination of wake-airfoil interaction noise parameters (2013) (3)
Frequency dependent selection of control sensors in multi-channel acoustic control (2020) (3)
Basis functions and their sensitivity in the wave-based substructuring approach (2008) (3)
A Novel Approach to Real-Time Flexible Multibody Simulation: Sub-System Global Modal Parameterization (2011) (3)
Application of the efficient wave based prediction technique for the steady-state dynamic analysis of flat plates (2000) (3)
State Estimation: A Model-Based Approach to Extend Test Data Exploitation (2016) (3)
Robust and reliable fatigue design of automotive and aerospace structures (2007) (3)
A combined use of the adaptive inverse plant modeling and iterative learning control strategy for service load simulations (2015) (3)
An Ease-off Based Methodology for Contact Detection and Penetration Calculation (2016) (3)
Spectral Properties of Discontinuous Galerkin Space Operators on Curved Meshes (2011) (3)
Non-linear MDOF vehicle suspension testing (2004) (3)
Virtuel Car Sound synthesis approach for hybrid and electric vehicles (2012) (3)
Use of a Generalized Corcos model to predict flow-induced noise in a cavity-plate system (2016) (3)
High performance implementation and conceptual development of the wave based method for steady-state dynamic analysis of acoustic problems (2002) (3)
Experimental and numerical validation of laminated structure dynamics from a SRM stator (2015) (3)
Application of state estimation to the monitoring of multiple components in non-linear electro-mechanical systems (2020) (3)
A Trefftz-based prediction technique for coupled structural acoustic radiation problems (2001) (2)
Application of the wave based prediction tehnique for the steady-state dynamic analysis of multi-domain acoustic problems (2003) (2)
A Single Step Modal Parameter Estimation Algorithm: Computing Residues from Numerator Matrix Coefficients of Rational Fractions (2020) (2)
Application of a time-stable model order model reduction scheme to an exterior vibro-acoustic finite element model (2016) (2)
An adaptive direct multisearch method for black-box multi-objective optimization (2021) (2)
Time-domain model identification of structural dynamics from spatially dense 3D vision-based measurements (2)
Trailing-edge noise prediction using synthetic turbulence and acoustic perturbation equations in a hybrid methodology (2017) (2)
A wave‐based prediction technique for vibroacoustics: Comparison with the finite‐element technique and experimental validation (1998) (2)
test setup for tire/road noise caused by impact road excitations: first outlines (2006) (2)
Synthesis of Drive-by Noise Based on Numerically Evaluated Source-Receiver Transfer Functions Employing the FMBEM (2011) (2)
A new wave based prediction technique for coupled vibro-acoustic analysis: theoretical description and application to a double wall structure (1996) (2)
Impedance eduction in the presence of grazing flow based on an analytical multi-port model (2015) (2)
Application of the wave based technique for steady-state semi-infinite radiation analysis (2008) (2)
Characterization of tyre exterior noise radiation (2014) (2)
Consensus-based distributed sensor fusion over a network (2017) (2)
PREDICTION OF TENSILE STIFFNESS AND FAILURE OF CARBON FIBRE COMPOSITE LAMINAE: A MULTI-SCALE NON-DETERMINISTIC APPROACH (2018) (2)
Selection of Small Sensor Arrays for Localization of Damage in Complex Assemblies Using Vibro-Acoustic Signals (2019) (2)
Improving the wave based method for the steady-state dynamic analysis of acoustic systems (2002) (2)
On the physically consistent characterisation of a system for FRF-based substructuring (2021) (2)
Modelling of sound damping multi-layers using a hybrid Finite Element - Wave Based Method (2012) (2)
Vehicle state and tire force estimation: Performance analysis of pre and post sensor additions (2020) (2)
An efficient prediction technique for the steady-state dynamic analysis of flat plates (2000) (2)
Vibro-acoustic modeling and validation using viscoelastic material (2017) (2)
From torsional resonance analysis towards more degrees of freedom and flexible multibody modelling as a means for improving accuracy of dynamic load prediction in multi-megawatt wind turbine gearboxes (2009) (2)
Study of convergence and efficiency of a nodal Quadrature-Free Discontinuous Galerkin Method on meshes of tetrahedral and hexahedral elements (2007) (2)
Development of a flexible multibody simulation package for in-house benchmarking (2015) (2)
Effects of center distance and microgeometry on the dynamic behaviour of a spur gear pair (2015) (2)
Design sensitivity analysis and optimization of frequency averaged input power using the residue theorem (2014) (2)
An overview of novel non-probabilistic approaches for non-deterministic dynamic analysis (2005) (2)
Experimental study on the aeroacoustic characterization of exhaust mufflers in the presence of mean flow (2010) (2)
Improving the Sound Transmission Loss of an Aircraft Ceiling Panel by Locally Resonant Metamaterials (2022) (2)
Assessing the Stability of Tibial Implants: an Experimental and Numerical Structural Health Monitoring Approach (2013) (2)
A wave based prediction technique for vibro-acoustic systems with cylindrical shell components (1997) (2)
Model-based virtual sensors by means of Modelica and FMI (2017) (2)
Experimental identification of noise reduction properties of honeycomb panels using a small cabin (2014) (2)
A hybrid flow-acoustic prediction technique with application to 2D Cavity Flow Noise (2005) (2)
Time Stepping and Linear Stability of Runge-Kutta Discontinuous Galerkin Methods on Triangular Grids (2010) (2)
Application of the transformation method to assess response uncertainty of a vibro-acoustic system (2005) (2)
Recent advances in interval and fuzzy finite element analysis (2012) (2)
A state-space approach for ASAC simulation (2007) (2)
Calibration of the two microphone transfer function method by determining the hard wall impedance at shifted reference sections (2008) (2)
Acoustic impedance sensitivity approach for defining absorbing material layout using the wave based method (2020) (2)
Deep Unsupervised Transfer Learning for Health Status Prediction of a Fleet of Wind Turbines with Unbalanced Data (2021) (2)
An automated procedure for interval and fuzzy finite element analysis (2004) (2)
Validation of homogenization technique used for accurate predictions of laminated structures’ mechanical behavior (2016) (2)
An advanced modeling technique for rolling element bearings in elastohydrodynamic field (2017) (2)
Black box stability preserving reduction techniques in the Loewner framework for the efficient time domain simulation of dynamical systems with damping treatments (2022) (2)
PARAMETRIC MODEL-ORDER REDUCTION FOR VISCO- ELASTIC FINITE ELEMENT MODELS: AN APPLICATION TO MATERIAL PARAMETER IDENTIFICATION (2015) (2)
Mechatronic powertrain virtual sensor: system-level model and sensor selection (2017) (2)
Two Different Methods to Measure the Stability of Acetabular Implants: A Comparison Using Artificial Acetabular Models (2020) (2)
Vibro-acoustic fault detection using a numerical time reversal method with reduced order models (2016) (2)
Implementation of a surface based coupling approach in a high-order DG aeroacoustics propagation solver (2015) (2)
Interference effects in phased beam tracing using exact half-space solutions. (2016) (2)
How Mode Veering and Mode Crossing affects Global Modal Parametrization and solutions to overcome these problems (2010) (2)
Coupled finite element-wave-based approach in steady-state structural acoustics (2003) (2)
Coupled state-input-parameter estimation for structural dynamics through Kalman filtering (2014) (2)
Dynamic Characterization of Wind Turbine Gearboxes in Operational Conditions (2015) (2)
Automated diagnosis of piston slap in engines (2012) (2)
Predicting the aerodynamically generated noise in 2D-muffles and its far-field propagation using a combined LES/LEE approach (2004) (2)
On the acoustic absorption of micro slitted metamaterials: a numerical and experimental study (2015) (2)
Influence of irregular grids on the accuracy of a quadrature-free discontinous galerkin method (2006) (2)
The Effect and Selection of Solution Sequence in Co-Simulation (2021) (2)
Incommensurate vibro-acoustic performance due to in-process blank holder force variation during deep drawing process (2021) (2)
Compressive sensing-moving horizon estimator for combined state/input estimation: an observability study (2016) (2)
System-Level Modal Representation of Flexible Multibody Systems (2009) (2)
Measurement of dispersion curves for locally resonant metamaterials with damping (2016) (2)
Reconstruction of the in-plane mode shape of a rotating tire with a continuous scanning measurement using the Hilbert-Huang transform. (2015) (2)
Inertial property estimation by the modal model method (2012) (2)
Interval fields to represent uncertainty on input and output side of a FE analysis (2010) (2)
Simulation of the Vibro-acoustic Interaction in a Flexible Flow Duct Using a Partitioned Approach in the Time Domain (2021) (2)
Towards phase-based defect detection: A feasibility study in vibrating panels (2022) (2)
Speeding up vibro-acoustic modification predictions using a wave-based substructuring approach and ATV technology (2005) (2)
Integrating Vehicle Body Concept Modelling and Flexible Multi-Body Techniques for Ride and Handling Simulations (2012) (2)
DESIGN OPTIMIZATION OF THE FREQUENCY AVER-AGED INPUT POWER USING THE RESIDUE THEOREM (2013) (2)
Analytical Lumped-Parameter Model of Misaligned Gear Contacts for Efficient System Level Drivetrain Simulations (2022) (2)
(Generalized) Bloch mode synthesis for the fast dispersion curve calculation of 3D periodic metamaterials (2021) (2)
The use of locally resonant metamaterials to reduce flow-induced noise and vibration (2022) (2)
Use of Flexible Models in Extended Kalman Filtering Applied to Vehicle Body Force Estimation (2016) (2)
Determining the Important Degrees of Freedom in Road Reproductions (2007) (2)
A nondestructive method to verify the glenosphere-baseplate assembly in reverse shoulder arthroplasty. (2016) (2)
Effect of systematic FRF errors on matrix inversion based vibro-acoustic analysis methods (2011) (2)
Reduced-Order Modelling of Multibody Contact Problems: A Novel Semi-Analytic Method (2017) (2)
Vibro-acoustic simulation of damped orthotropic plates with the wave based method (2014) (2)
Application of a matrix-free model order reduction scheme to automotive treated panels (2016) (2)
Feasibility study of the wave based method for high-frequency steady-state acoustic analysis (2004) (2)
Nonlinear MPC Design Using Amesim Models (2016) (2)
High-Speed Camera based Experimental Modal Analysis for Dynamic Testing of an Automotive Coil Spring (2021) (2)
The acoustic insulation performance of infinite and finite locally resonant metamaterial and phononic crystal plates (2019) (2)
Parametric model order reduction for acoustic boundary element method systems through a multiparameter Krylov subspaces recycling strategy (2022) (2)
Experimental demonstrators of vibro-acoustic metamaterials for low frequent NVH insulation (2016) (2)
Application of a novel wave based prediction technique for acoustic cavity analysis (2004) (2)
Development of Multi-Actuated Ground Vehicles: Educational aspects (2018) (2)
Virtual Load Sensing Methods for Efficient Durability Testing and Customer Load Acquisition (2016) (2)
Online state and input force estimation for multibody models employing extended Kalman filtering (2013) (2)
Sub-system global modal parameterization for real-time simulation of flexible multibody systems (2011) (2)
A Computer Aided Engineering Approach for the Optimal Design of an Active Suspension System (2009) (2)
Experimental assessment of gear meshing excitation propagation throughout multi megawatt gearboxes (2011) (2)
Effects of core geometry on the vibro-acoustic behaviour of fibre reinforced corrugated core sandwich panels (2012) (2)
Characterizing viscoelastic and anisotropic porous materials (2006) (2)
3 Case studies of model order reduction for acoustics and vibrations (2020) (2)
An efficient wave based mehtod for 2D dynamic poroelastic problems with corner stress singularities (2010) (2)
Expanding the bandwith of MDOF road reproductions (2006) (2)
Lorentzian-weighted frequency averaging for the evaluation of the input power into one-dimensional structural dynamic systems (2012) (2)
Experimental Study on the Impact of the Number of Laminas on the Dynamics Behavior of an Electric Machine Stator (2016) (2)
An Improved 2DCNN With Focal Loss Function for Blade Icing Detection of Wind Turbines Under Imbalanced SCADA Data (2021) (2)
Stopband behavior in infinite metamaterial pipes (2016) (1)
Numerical Two-Port Characterization of the Aeroacoustic Propagation Effects in Exhaust Mufflers Including Non-Uniform Mean Flow Effects (2010) (1)
A Boundary Element Method iterative procedure to compute the compressible response of an airfoil subjected to incoming turbulence (2014) (1)
Global mesh stiffness calculation for lightweight spiral bevel gears (2016) (1)
Model-Based Physical System Deployment on Embedded Targets with Contract-Based Design (2017) (1)
Model-Based State Estimation for the Diagnosis of Multiple Faults in Non-linear Electro-Mechanical Systems (2018) (1)
A NOVEL FINITE ELEMENT MODEL METHODOLOGY FOR THE GENERIC MODELLING OF ADHESIVE AGEING (2018) (1)
Application of Energy Flow Analysis Focused on Path Visualization into Vehicle Design (2010) (1)
Vibro-acoustic analysis procedures for the sound insulation characteristics of agricultural machinery cabins (2001) (1)
A Wave Based Transfer Matrix Method for accurate simulation of acoustic problems with multilayered damping treatment (2015) (1)
On a fast frequency sweep approach for the Helmholtz FE problem via model reduction (2012) (1)
On the use of model order reduction for acoustics: second-order Arnoldi and the adaptive windowing algorithm (2011) (1)
Optimisation algorithms for non-deterministic dynamic finite element analysis of imprecisely defined structures (2006) (1)
Accelerating boundary element methods in wideband frequency sweep analysis by matrix-free model order reduction (2022) (1)
Damping in a locally resonant metamaterial using inverse and direct unit cell modelling (2017) (1)
A linear formulation for misaligned helical gear contact analysis using analytical contact stiffnesses (2023) (1)
DEVELOPMENT OF A FEMORAL IMPLANT INSTRUMENT TO ASSESS PRIMARY STABILITY USING VIBRATIONAL ANALYSIS (2019) (1)
ASSESSING THE INITIAL STABILITY OF THE ACETABULAR IMPLANT: DEVELOPMENT OF AN INTRAOPERATIVE TOOL (2012) (1)
Reliability-based design in automotive and aerospace engineering (2008) (1)
Vibro-Acoustic Metamaterials for Improved Interior NVH Performance in Vehicles (2020) (1)
A Parametric Model Order Reduction for simulations of beam-based structures (2016) (1)
Non intrusive stress and bowing estimation for rotating machinery (2016) (1)
INCLUDING FLEXIBLE REPRESENTATION OF SUSPENSION COMPONENTS IN THE CO-SIMULATION ENVIRONMENT FOR ACTIVE SYSTEMS SENSITIVITY ASSESSMENT (2011) (1)
Direct estimation of residues from rational-fraction polynomials as a single-step modal identification approach (2021) (1)
Exhaustive Synthesis and Analysis of Automotive 2-Stage Planetary Transmission Designs (2019) (1)
Coupled (vibro-)acoustic problems using geometrical acoustics and patch transfer functions (2015) (1)
Numerical assessment of the impact of vehicle body stiffness on handling performance (2012) (1)
Isogeometric analysis for nonlinear planar pantographic lattice: discrete and continuum models (2018) (1)
An object-oriented implementation scheme for an efficient wave based prediction technique for steady-state vibro-acoustic problems (2002) (1)
Shock and vibration testing using a high-frequency 6-DOF hydraulic shaker table (2003) (1)
A Design Space Exploration Framework for Automotive Sound Packages in the Mid-Frequency Range (2017) (1)
Uncertain Ritz vectors as connection between the interval finite element method and the Component Mode Synthesis technique (2008) (1)
The effect of sound absorbing materials, plate stiffness and vibration isolators on the vibro-acoustic behaviour of finite double wall structures (1994) (1)
On the use of a high-order finite element - wave based method for interior acoustic cavity analysis (2007) (1)
Efficient evaluation of the frequency-averaged power injected into systems of industrial complexity (2014) (1)
Sound transmission predictions using the wave based method for three dimensional coupled vibroacoustic analysis (2010) (1)
Towards SQ Metrics Balance on Hybrid Powertrains (2015) (1)
Strain-Based Experimental Modal Analysis: Use of Mode Curvature and Strain-to-Displacement Relations (2015) (1)
Micro-scale finite element simulation of the viscoelastic damping in unidirectional fiber reinforced composites (2016) (1)
Predicting the aerodynamically generated noise in 2D-expansion chambers using a combined LES/LEE approach (2003) (1)
A multi-scale model order reduction scheme for transient modelling of periodic structures (2021) (1)
Decentralized/Distributed Output Feedback H-infinity Controller Design for Vibration Reduction of Smart Structures (2016) (1)
Application of a Priori Hyper-Reduction to the Nonlinear Dynamic Finite Element Simulation of a Rolling Car Tire (2019) (1)
Investigation of a coupled finite element - wave based technique for 2D steady-state acoustic analysis comparing a direct and an indirect approach (2006) (1)
COMPARISON OF CEMENTLESS THA STEM INSERTION USING THE WOODPECKER VERSUS HAMMER BLOWS BY STRAIN AND VIBRATIONAL MEASUREMENTS: AN IN VITRO STUDY (2017) (1)
Reduction of Structure-Borne Tyre/Road Noise through Rubber Resonant Metamaterials in Tyres (2022) (1)
Experimental study of the valve-bend interaction in an aircraft ECS system (2015) (1)
Vibro-Acoustic analysis of structures with geometric shape uncertainty (2011) (1)
Monitoring of the Reamer Seating using Acoustic Information (2015) (1)
Testing research activities at the Noise & Vibration Research Group of the K.U.Leuven (2011) (1)
TPA for internal force identification in a mechanical system (2013) (1)
Reverse engineering of deep drawn components with an isogeometric framework (2018) (1)
State estimation techniques for rotor unbalance identification (2015) (1)
Angle-dependent reflection, transmission and absorption coefficients measurement using a 2D waveguide (2021) (1)
Use of a wave based method to calculate the sound field above a patchwork of absorbing materials (2005) (1)
Contribution of the wave modes to the sound transmission loss of inhomogeneous periodic structures using a wave and finite element based approach (2022) (1)
Robust and reliable fatigue design (2007) (1)
Use of Sub-System Global Modal Parameterization Models in Extended Kalman Filtering for Online Coupled State/Force Estimation (2013) (1)
Synopsis of the Experimental and Numerical Tire Dynamic Characterization (2014) (1)
Efficient interfacing scheme for using source terms in a high-order DG aeroacoustics propagation solver (2015) (1)
Virtual Sensing for Rotordynamics (2016) (1)
A parametric model order reduction approach for beam-based structures (2016) (1)
VIBRO-ACOUSTIC ANALYSIS OF THE BRAZILIAN SATELLITE LAUNCHER FAIRING, USING SEA (2005) (1)
Analysis of Efficient Interval Field Techniques for Random Field Analysis With Uncertain Correlation Length (2011) (1)
Compressive sensing-moving horizon estimator for periodic loads: Experimental validation in structural dynamics with video-based measurements (2018) (1)
An Approach for Combined Vertical Vehicle Model and Road Profile Identification from Heterogeneous Fleet Data (2019) (1)
Steady-state response analysis of a flat convex plate by the wave based prediction technique (2000) (1)
Robust vehicle state and tire force estimation: Highlights on effects of road angles and sensor performance (2021) (1)
Using the resonance behavior of finite pipes for defect detection based on the wave-scattering (2016) (1)
MUSIC algorithm for vibro-acoustic defect detection (2017) (1)
Reanalysis-based FEM for fuzzy uncertainty treatment in static structural analysis (2008) (1)
Compressive sensing-moving horizon estimator for distributed loads (2017) (1)
A Trefftz-based numerical modelling framework for Helmholtz problems with multiple inclusions (2008) (1)
Parameter identification strategy for a generalized vehicle concept model for ride and handling analysis (2013) (1)
URANS Analysis of Flow-Induced Cavity Resonances (2009) (1)
The Dual Flexibility (DF) formulation: a novel flexible multibody formulation resulting in quadratic system equations (2016) (1)
A novel prediction technique for the steady-state dynamic analysis of coupled vibro-acoustic systems (2000) (1)
Experimental and numerical tools for the evaluation of the sound isolation characteristics of the cabin of a combine harvester (2001) (1)
Extension of Amiet's Theory for the Aeroacoustic Analysis of a Wing-Flap Configuration Including Acoustic Scattering (2012) (1)
Deviatoric component modes in an interval component mode synthesis procedure (2008) (1)
Application of modal model reduction for hybrid structural finite element - acoustic wave based models (2007) (1)
Strain-Based Experimental Modal Analysis on Planar Structures: Concepts and Practical Aspects (2016) (1)
HYBRID WAVE BASED-FINITE ELEMENT UNIT CELL MODEL TO PREDICT REFLECTION, TRANSMISSION AND ABSORPTION COEFFICIENTS OF PERIODIC MATERIAL SYSTEMS (2017) (1)
Time Stepping with Runge-Kutta Discontinuous Galerkin Methods on Triangular Grids (2010) (1)
Extension of the Amiet theory for compact leading edge airfoil noise prediction (2014) (1)
PREDICTING THE AERODYNAMIC NOISE GENERATION AND PROPAGATION MECHANISMS IN EXPANSION CHAMBERS USING AN ACTIVE BI-PORT FORMULATION (2008) (1)
The Use of Dynamic Strain Sensors and Measurements on the Ground Vibration Testing of an F-16 Aircraft (2015) (1)
Filtering techniques for computational aeroacoustics applications (2006) (1)
Vibro-acoustic design optimisation of a composite sandwich panel using a new experimental setup (2012) (1)
Virtual sensing strategies utilizing various model complexities: industrial applications (2021) (1)
How the upscaling trend in wind turbine design aﬀects dynamic behaviour of the drive train (2012) (1)
Pre-test analysis to reproduce random pressure fields with multi-channel acoustic control (1)
Numerical and Experimental Study of Local Cell Resonators to Obtain Low-Frequency Vibrational Stopbands in Periodic Lightweight Structures (2012) (1)
Validation of a Finite Element model by experiments of a dedicated test set-up for boundary excitation of trim assemblies (2012) (1)
Non-destructive structural integrity testing of finite plates based on the wave scattering at defects with sub-wavelength size (2017) (1)
Connected Sub-System GlobalModal Parameterization for efficient simulation of complex flexible multibody systems (2012) (1)
Sound transmission analysis using the hybrid finite element - wave based approach for coupled vibroacoustic problems (2010) (1)
The use of vibro-acoustic information to assess acetabular cup seating during THA: an in vitro study (2016) (1)
State and Force Estimation on a Rotating Helicopter Blade through a Kalman-Based Approach (2020) (1)
Structural Health Monitoring Considerations on Offshore Wind Turbine Models (2015) (1)
Locally Resonant Metamaterial Patches on Rear Shock Towers of a Vehicle to Reduce Structure‑Borne Road Noise: Numerical and Experimental Performance Validation (2020) (1)
Analyses on the effects of rolling on the tire dynamics (2013) (1)
An explicit Wave Based - Finite element model as alternative to the DtN finite element method (2010) (1)
Active Noise Control in Hybrid Powertrains Guided Multi-Objective Optimization of Sound Quality Metrics (2016) (1)
Development of a Fast Procedure for Vehicle Noise Source Quantification (2007) (1)
A Linear Network Representation for the Determination of the Acoustic Properties of Lined Ducts Carrying a Non-Uniform Mean Flow (2009) (1)
Bounding the dependence measures for spatial uncertainties (2012) (1)
Towards Real-time Multibody Simulations using ARM-based Embedded Systems (2014) (1)
Multi-axial dynamic testing for design/functional/durability testing (2016) (1)
A hybrid finite-element-wave based method for the dynamic analysis of two-dimensional solids (2005) (1)
How accurate does an impedance model represent porous acoustic insulation ? A validation study using a new wave based prediction technique (1997) (1)
Combined impulse-response/Kalman filtering (CIRKF) for input/state estimation (2022) (1)
Numerical modeling of the flow acoustic behavior of sub-millimeter orifices in 3D using linearized Navier-Stokes equations (2019) (1)
Experimental Vibration Analysis of a Rotorcraft Active Gurney Flap System (2014) (1)
Non-deterministic finite element analysis with shape uncertainty based on interval fields (2010) (1)
DESIGN METHODOLOGY FOR ENGINEERING STRUCTURES FEATURING AUTOMATIC DESIGN CONCEPT GENERATION BY CONSTRAINT PROGRAMMING AND OBJECTIVE RANKING BY MULTI-ATTRIBUTE EVALUATION (2020) (1)
Simplified rotating tire models based on cylindrical shells with free boundary conditions (2014) (1)
Dynamic analysis of shell structures containing kinks using an isogeometric Kirchhoff-Love formulation (2015) (1)
GPU accelerated initialization of local maximum-entropy meshfree methods for vibrational and acoustic problems (2020) (1)
Conceptual and reduced vehicle models performance enhancement through parameter estimation and neural-networks coupling (2010) (1)
Attenuation prediction in 1D waveguides using locally resonant metamaterials (2016) (1)
Application of the fuzzy finite element method to the dynamic modelling of car door weather seals (2005) (1)
Structural dynamics design validation and optimisation of structures with imprecise parameters using the fuzzy finite element method (2007) (1)
Exploiting Cyclic Angle-Dependency in a Kalman Filter-Based Torque Estimation on a Mechatronic Drivetrain (2022) (1)
Influence of Artificial Soft Tissue on Intra-Operative Vibration Analysis Method for Primary Fixation Monitoring in Cementless Total Hip Arthroplasty (2022) (1)
Dynamic interval analysis of FE models with uncertain substructures (2006) (1)
Computation of tonal noise in an automobile door cavity using hybrid techniques (2006) (1)
On the influence of boundary conditions on the predicted stop band width of finite size locally resonant metamaterials (2017) (1)
Joint state/input estimation with a Fourier dictionary for the input representation: effect of spectral leakage (2019) (1)
Comparison of Two Measurement Methods for Exterior Noise Radiation Characterization of a Loaded Rotating Tyre (2015) (1)
Validation of a time domain impedance formulation for the case of a 2D rectangular lined duct with a non-uniform mean-flow with a finite boundary layer thickness (2014) (1)
An evaluation of coupling techniques for combined LES/LEE approaches to calculate aerodynamically generated noise (2005) (1)
Updated flexible multibody wind turbine drivetrain model to determine excitation inputs for acoustic calculations (2011) (1)
Generating set search using simplex gradients for bound-constrained black-box optimization (2021) (1)
Deep learning of multibody minimal coordinates (2021) (1)
Gear transmission error measurement accuracy using low-cost digital encoders (2013) (1)
Absorption enhancement by phase gradient metamaterial (2020) (1)
Numerical-experimental vibro-acoustic characterisation of lightweight materials using a novel test setup (2012) (1)
Stochastic reconstruction of turbulence for trailing-edge noise computation (2016) (1)
Structural-acoustic sensitivity and acoustic impedance sensitivity analysis using the wave based method (2010) (1)
Transversally Asymmetric Stiffness of Laminated Stator Core: A Solution for Noise Mitigation of Electric Machines (2019) (1)
An Improved Optimal Sensor Placement Strategy for Kalman-Based Multiple-Input Estimation (2020) (1)
Filter failure analysis for the SWAP instrument on-board of PROBA2 (2011) (1)
A 3D high-order method for aeroacoustic propagation calculations (2005) (1)
On the use of a novel wave based prediction technique for acoustic cavity analysis (2004) (1)
A Kriging based optimisation algorithm for interval and fuzzy FRF analysis (2008) (1)
A study of metric for mid-frequency performance assessment of vehicle panel stacks (2015) (1)
Vibro-acoustic analysis of the low frequency insertion loss of finite double panel partitions (1995) (1)
AN ACOUSTIC MEASUREMENT METHOD TO ASSESS ACETABULAR IMPLANT STABILITY IN CEMENTLESS TOTAL HIP REPLACEMENT (2019) (1)
Investigation of thermal effects on the steady-state vibrations of a rectangular plate–cavity system subjected to harmonic loading and static temperature loads using a Wave Based Method (2021) (1)
Development, Implementation and Validation of a Hard Real-Time Multibody Simulation For High-Fidelity Steering Wheel Force Feedback (2015) (1)
Validation of a direct/indirect hybrid finite element-wave based method for 3D steady-state acoustic analysis (2007) (1)
A hybrid Boundary Element - Wave Based Method in a Multi-Level concept for steady-state 2D acoustic analysis (2011) (1)
Development of a Generalized Corcos Model for the Prediction of Turbulent Boundary Layer-Induced Noise (2017) (1)
Input optimization for flexible multibody systems using the adjoint variable method and the flexible natural coordinates formulation (2023) (1)
Aeroacoustic Instability Analysis of Helmholtz Resonators Through High-Order Unsteady Reynolds-Averaged Navier–Stokes Simulations (2022) (1)
An efficient wave based method for steady-state vibro-acoustic transmission calculations (2006) (1)
Sound Transmission Loss of Locally Resonant Metamaterial and Phononic Crystal Plates (2018) (1)
Interval finite element analysis of large structures with uncertain parameters (2005) (1)
Various torsional vibration measurement methods for optimal trade-off between high accuracy and ease of instrumentation (2014) (1)
A validated approach for multibody models of megawatt wind turbine gearboxes (2009) (1)
Vibrational Techniques to Assess the Initial Stability of Spherical Press-Fitted Implants: In Vitro Study (2010) (1)
Optimization methodologies based on structural modification analysis in automotive NVH design (2011) (1)
Dynamical Analysis of Multibody Systems with Design Uncertainties ” A system level model reduction approach for flexible multibody systems with parametric uncertainties (2014) (1)
Vibro-acoustic response of flexible Micro-Perforated Plates: impact of the boundary condition at the perforation walls (2016) (1)
An estimation approach for uncertain parameters in multibody systems (2014) (0)
Model reduction techniques to speed up multibody dynamics simulations (2008) (0)
Experimental input force estimation using large-deformation flexible multibody simulation (2013) (0)
A Wave Based Method for solving Helmholtz problems in semi-infinite domains (2010) (0)
On the use of different perturbation techniques for the simulation of the statistical behaviour of plates in the mid-frequency range using an efficient Wave Based Method (2012) (0)
On the applicability of static modes switching in gear contact applications (2013) (0)
Dipole identification over a cylinder section in subsonic jet flow using generalized inverse beamforming (2011) (0)
AN ACCELERATED DEFLATION-BASED PRECONDITIONER FOR PARAMETERIC SYSTEMS BASED ON SUBSPACE RECYCLING (2022) (0)
Flexible multi-level fast multipole BEM with direct solver for industrial acoustic problems (2019) (0)
Sound transmission of a finite double wall structure with active and passive damping (1994) (0)
Multi-Body Model of a Fixed-Wing Large Passenger Aircraft for Nonlinear State Estimation (2015) (0)
An efficient axisymmetric Wave Based Method to evaluate the effect of sample mounting conditions in tube measurements for absorption and transmission loss identification of (layered) poro-elastic materials (2014) (0)
Effects of real-case parameters on gear N&V through efficient multibody TE-based simulations (2011) (0)
Development of an integrated modelling approach for mechatronic systems: Virtual sensing for rotordynamics (2015) (0)
Hybrid wave-based - FE methods for efficient mid-frequency vehicle acoustic analysis (2009) (0)
Real-Time Estimation based on Multibody Dynamics for Automotive Embedded Heterogeneous Computing (2017) (0)
Reduced modal models and negative concept modifications in dynamic analysis (2006) (0)
Analysis of aeroacoustic instabilities in Helmholtz resonators using linear scattering-transfer matrices. (2018) (0)
THE EVALUATION OF THE CHANGES IN ACETABULAR IMPLANT FIXATION DURING INSERTION BY MEASURING IMPACT ACCELERATIONS ON THE INSERTOR: AN IN VITRO STUDY (2018) (0)
Investigating the Influence of Reaming Techniques on Geometrical Outcome in TSR (2013) (0)
PARAMETRIC STUDY OF A STOCHASTIC METHOD FOR TRAILING-EDGE TURBULENCE GENERATION FOR AEROACOUSTIC APPLICATIONS (0)
Parametrized model order reduction for second order systems with a low rank change in the system matrices (2017) (0)
Strain-Based Experimental Modal Analysis of a Composite Plate: Modal Validation and Correlation (2015) (0)
Lightweight NVH Solution Based on Vibro-Acoustic Metamaterials (2016) (0)
The Use of Vibrational Techniques as a Tool in Total Hip Arthroplasty : How Much Can We Learn From Generic Models ? (2011) (0)
Wave Based Methods to predict the dynamic behaviour of poroelastic materials (2013) (0)
Model reduction for non-linear dynamics by projection on state-dependent modal base (2009) (0)
A stochastic approach for the computation of turbulence noise generation in a cavity flow (2006) (0)
Simulation of the flow-acoustic-structural interaction in flow ducts using a partitioned approach in the time domain (2022) (0)
Design and validation of a metamaterial acoustic enclosure (2016) (0)
The Wave Based Method: an efficient alternative for vibro-acoustic predictions in the mid-frequency range (2012) (0)
Experimental Setup and Method to measure locally the Micromotion between Hip Implant and Femur (2015) (0)
Parallel time-domain simulations for vibro-acoustics using Krylov subspace projections and linear-phase filters (2016) (0)
Dynamic Stability Analysis of Linear Time-varying Systems via an Extended Modal Identification Approach (2017) (0)
Using an isogeometric indirect boundary element method for studying unbounded acoustic problems containing complex geometries (2016) (0)
An Efficient Parametric Model Order Reduction Technique Applied to Bearing Force Estimation (2013) (0)
An efficient multi-level wave based modelling concept for acoustic radiation and scattering problems (2008) (0)
Assessment of the performance of trim materials: validation by mean of several measurement strategies (2014) (0)
SENSITIVITY ANALYSIS OF THE SNGR METHOD APPLIED TO JET NOISE (2005) (0)
Physics-based sound radiation estimation from multiple speakers by combined lumped parameter and reduced-order finite element modeling (2022) (0)
A semi-analytic strategy for the system-level modelling of flexibly supported ball bearings (2015) (0)
Computer-aided integrated design for mechatronic systems with configuration-dependent dynamics (2008) (0)
Efficient and accurate formulation of FE-based contact mechanics problems (2016) (0)
Investigation of the structural dynamic behavior of space structures under uncertainty effects (2007) (0)
Local reduced order modeling for energy preserving contact simulation (2016) (0)
Semi-Supervised CNN-Based SVDD Anomaly Detection for Condition Monitoring of Wind Turbines (2022) (0)
A new numerical prediction technique for structural-acoustic harmonic analysis in automotive applications (2003) (0)
Efficient Transient Analysis of the High-Speed Stage of a Wind Turbine Gearbox by Advanced Model Reduction Techniques and Memory-Effective Discretization (2015) (0)
Experimental approaches for monitoring of rotational dynamics systems (2016) (0)
Plenary Talks Toward A Generalized Fuzzy Logic-Based Decision Theory (2011) (0)
Validation of a surface based analogy for the APE accounting for scattering effects (2016) (0)
Model-based Distributed Sensor Fusion For MAGV State And Parameter Estimation (2018) (0)
Interpolation strategies for non-linear parametric model order reduction in gear contact simulation (2014) (0)
Condition Monitoring of Wind Turbines Based on Anomaly Detection Using Deep Support Vector Data Description (2022) (0)
Investigation of energy harvesting systems for automotive applications (2016) (0)
Virtual Sensing for rotating machinery (2016) (0)
Drone noise directivity and psychoacoustic evaluation using a hemispherical microphone array. (2022) (0)
ℋ2 optimal vibration control using tuned mass dampers and inertial actuators: comparison of passive and active control effects. (2013) (0)
Rated Life Calculation Potential of Gearbox Model Based Force Estimates (2014) (0)
Application of the wave based technique for the sound field prediction above a patchwork of acoustic absorbant materials (2005) (0)
Fast frequency sweep method for boundary element models arising in acoustics (2012) (0)
Experimental and Numerical Validation of Laminated Structure Dynamics from a Switched Reluctance Machine Stator (2015) (0)
3D vibro-acoustic simulations of problems with damping layers using the Wave Based Method and its hybrid extensions (2014) (0)
Robust virtual sensing of the exterior noise radiation from a complex structure in different acoustic environments (2019) (0)
Bead Modifications and Wave-Based Substructuring in an automotive NVH optimization scenario (2010) (0)
Experimental Validation of the Two-port Impedance Eduction Method (2019) (0)
Flexible interface models for force/displacement field reconstruction applications (2022) (0)
The Use of a Vibro-acoustic Method to Detect Optimal Reamer Seating in Cementless THA (2015) (0)
Simulation of time-harmonic acoustic problems with a coupled isogeometric-meshless approach (2015) (0)
Component Mode Synthesis as an approximation of the frequency response (2010) (0)
An in silico and in vitro study for vibration-based fixation assessment of tibial TKA components (2014) (0)
Experimental Validation of Numerical Models for Metal Plate Joining Techniques (2016) (0)
Accurate and Efficient Interweaving of Substructure Uncertainties and Component Mode Synthesis (2008) (0)
The application of efficient axisymmetric wave based models for the evaluation of the reflection coefficient of poro-elastic materials (2013) (0)
Numerical analysis of different radiation models for Clustering Inverse Beamforming in a confined flow environment. (2018) (0)
Finite element analysis of the relationships between dynamic, physical and mechanical egg properties. (2009) (0)
Bloch theorem applied to structures with additional symmetries: reduced unit cell and irreducible Brillouin zone (2017) (0)
Trailing-Edge Noise Prediction by Solving Helmholtz Equation with Stochastic Source Term (2021) (0)
Coupling non-conforming NURBS patches in isogeometric analysis of complex thin shell structures (2016) (0)
A system-level bushing joint parameter identification approach using flexible multibody models (2017) (0)
Vibration - based Fixation Assessment of Tibial Knee Implants: A Combined In Vitro and In Silico Study (2016) (0)
Prediction and validation of the sound field above a patchwork of absorbing materials (2005) (0)
Method for characterisation of sound packages containing visco-elastic and anisotropic porous materials (2006) (0)
Real-time flexible multibody simulation with Global Modal Parameterization (2012) (0)
An exploration study of automotive sound package performance in the mid-frequency range (2019) (0)
An Integrated Co-Design Optimization Toolchain Applied to a Conjugate Cam-Follower Drivetrain System (2023) (0)
A flexible multi-body modelling approach for the design and analysis of complex mechatronic systems (2009) (0)
Modeling and Experimental Test Study of a Multilayer Piezoelectric Actuator (2016) (0)
Innovative vibro-acoustic metamaterials to provide lightweight NVH solutions (2014) (0)
Damage Localization on Lightweight Structures with Non-destructive Testing and Machine Learning Techniques (2021) (0)
AN ITERATIVE SOLUTION TECHNIQUE FOR COUPLED VIBRO-ACOUSTIC ANALYSIS (2004) (0)
A Wave Based Method for the prediction and optimisation of rigid frame poroelastic periodic structures (2014) (0)
ICSV 14 Cairns • Australia 9-12 July , 2007 TIME-DOMAIN ACOUSTIC SIMULATION OF 3 D LINED DUCTS WITH FLOW USING AN UNSTRUCTURED DISCONTINUOUS GALERKIN METHOD (2007) (0)
Nonlinear State Estimation for Aeroelastic Multi-Body Models (2016) (0)
The nephron of polypterus retropinnis Vaillant (1960) (0)
On the influence of transducer mass on the experimental identification of SEA loss factors (2000) (0)
A comparison and experimental validation of gear contact models for spur and helical gears (2014) (0)
Inverse Reconstruction of the Spatial Distribution of Dynamic Tire-Road Contact Forces in Time Domain Using Impulse Response Matrix Deconvolution for Different Measurement Types (2021) (0)
Experimental characterization of the acoustic behavior of micro-perforations under grazing flow (2021) (0)
Embedding a Multi-Body Model of a Fixed-Wing Aircraft in a Nonlinear State Observer (2015) (0)
Aeroacoustic instability analysis of a Helmholtz resonator using a High-Order DG Solver based on URANS equations (2020) (0)
Hard real-time multibody simulations using ARM-based embedded systems (2016) (0)
A multipatch coupling technique for isogeometric analysis of geometrically complex Kirchhoff-Love shells (2017) (0)
Static Modes Switching: Applicability, Limitations and Possible Solutions of Variable Size Static Augmentation (2011) (0)
Application of different simulation strategies to a butterfly valve for both Passive and Active acoustics behavior (2017) (0)
Hybrid Finite Element – Wave Based techniques for interior vibro-acoustics. Application to a large-sized vehicle model (2012) (0)
The Mechanical Consequences of a Suboptimal Assembly of the Glenoidal Component in Reverse Shoulder Arthroplasty (2011) (0)
Analysis of the aeroacoustic behavior of flow duct systems using an active multi-port characterization (2015) (0)
A trefftz-base prediction technique for coupled structural-acoustic radiation (2001) (0)
An indirect Trefftz-method for coupled vibro-acoustic predictions : comparison with the finite element method (1999) (0)
Measuring dispersion curves for vibro-acoustic metamaterials (2020) (0)
Parametric state-time reduction for the transient analysis of multi-physical systems (2018) (0)
Wiper for cleaning windows, in particular motor vehicles. (2004) (0)
Evaluation of wave transmission coefficients of plate junctions: comparison between coupling beam and strip plate modelling (2004) (0)
An automated fuzzy finite element procedure for frequency response function analysis (2005) (0)
Proceedings of ISMA2018 - International Conference on Noise and Vibration Engineering &USD2018 - International Conference on Uncertainty in Structural Dynamics (2018) (0)
A Multi-Level Wave Based Method to predict the dynamic response of 2D poroelastic materials containing inclusions (2015) (0)
Efficient time- and frequency-domain simulation methods for vibro-acoustics and flow acoustics (2016) (0)
Time-domainsimulation of 3D lined ducts with flow by a unstructured Discontinuous Galerkin Method (2007) (0)
Experimental Characterization of the Dynamic Behavior of Rolling Tires for Noise and Comfort Applications (2011) (0)
Development of an innovative noise generation system for turboprop aircraft fuselage testing (2022) (0)
EXPERIMENTAL SETUP AND METHOD TO ASSESS THE MICROMOTION OF FEMORAL REVISION IMPLANTS (2016) (0)
Wave propagation in poro-elastic materials using a shifted cell method for theory of Biot (2019) (0)
Modeling and validation for modern complex mechatronic systems (2014) (0)
Acoustic impedance sensitivity for the absorbing material layout using the wave based method (2014) (0)
Super-element global modal parameterization for efficient inclusion of highly nonlinear components in multibody simulation (2013) (0)
An extension of Amiet’s theory for turbulence-airfoil noise prediction accounting realistic airfoil geometries using BEM (2014) (0)
Accelerated dispersion curve calculations for periodic vibro-acoustic structures (2022) (0)
Simulation of systems parametrically dependent of the spatial configuration : a mechatronic approach (2007) (0)
Dynamic Behavior of Bearings on Offshore Wind Turbine Gearboxes (2016) (0)
GENERAL BLOCH MODELING OF PIECEWISE PERIODIC STRUCTURES (2020) (0)
Towards efficient system-level simulation and design of modern mechanical transmissions (2016) (0)
Sound absorption enhancement in poro-elastic materials in the viscous regime using a mass–spring effect (2021) (0)
Experimental analysis of tyre-road noise on a flat road vs. a road with discontinuities (2010) (0)
Transmitted power assessment from reverberant cavity set-up measurements (2014) (0)
MULTI-LAYER CORE TOPOLOGY SYSTEMS (2017) (0)
Discrete vs. distributed transducers for ASAC: a numerical study (2010) (0)
Acoustic impedance identification of absorbing material using the optimization (2014) (0)
Enhanced lightweight NVH solution based on vibro-acoustic metamaterials (2016) (0)
A Hybrid Wave Finite Element / Finite Element approach for the study of the local effects of inhomogeneities in waveguides (2015) (0)
IUTAM Symposium on "Dynamical Analysis of Multibody Systems with Design Uncertainties" A system level model reduction approach for flexible multibody systems with parametric uncertainties. (2015) (0)
Coupling loss factor calculation through Lorentzian-weighted frequency averaging of the direct field dynamic stiffness (2015) (0)
Hybrid FE-WB method for interior vibro-acoustics. CAE tools and strategies for industrial applications (2011) (0)
Prediction of dynamic hub forces as a source of structure-borne tire / coarse road noise using a high-fidelity simulation approach (2019) (0)
Structural Health Monitoring Applied on Orthopaedic Implants (2015) (0)
Dynamic Stability Analysis of Linear Time-varying Systems via an Extended Modal Identification Approach (2017) (0)
Multi-actuated ground vehicle tyre force estimation through a coupled 1D simulation-estimation framework (2019) (0)
Design of mechatronic systems with variable mechanical configuration (2008) (0)
A new numerical technique for coupled vibro-acoustic predictions based on wave representation (1996) (0)
NOVEL NONLINEAR LUMPED PARAMETER MODELS FOR ASYMMETRIC RUBBER BUSHING COMPONENTS (2018) (0)
A COMBINED 1D-3D MODELING APPROACH FOR THE DESIGN AND ANALYSIS OF COMPLEX MECHATRONIC SYSTEM (2014) (0)
A Computational Methodology for the Acoustic Characterization of Orifices under Grazing Flow Conditions (2012) (0)
POD-based reduced order model for the prediction of global and local elastic responses of fibre-reinforced polymer considering varying fibre distribution (2023) (0)
Passive vibration control of offshore wind turbines using structure-immittance approach (2018) (0)
A state-space modeling approach for active structural acoustic control 1 (2015) (0)
Equivalent force actuation modeling of laminated composites with piezoelectric actuators for vibration suppression (2016) (0)
Unsupervised transfer learning for condition monitoring of a fleet of wind turbines (2021) (0)
Defect detection in pipes based on the measurement of surface displacements (2016) (0)
Interval and fuzzy eigenfrequency analysis of uncertain substructured FE models (2007) (0)
A fuzzy FRF analysis of a stiened conical shell structure using an intelligent Kriging based optimisation procedure (2009) (0)
Non-destructive testing based on vibrations in the low to mid-frequency range (2018) (0)
Evaluation of Different Tire Noise Models for Vehicle pass-by Sound Synthesis (2009) (0)
THE EFFECT OF SYSTEM LEVEL MODEL ORDER REDUCTION IN (CONTACTING) FLEXIBLE MULTIBODY SIMULATION ON THE SIMULATION TIMESTEP (2016) (0)
Sound synthesis approach for sound quality design of ANVC applications (2006) (0)
EVALUATION OF TEMPERATURE EFFECTS ON PASSIVE ACOUSTIC DAMPERS WITH A FREQUENCY-DOMAIN LINEARIZED NAVIER-STOKES EQUATIONS SOLVER (2016) (0)
Finding the minimal unit cell – Bloch theorem for structures with translation and reflection or rotation symmetries (2017) (0)
Camera Measurement of the Acoustic Radiation of Vibrating, Curved Surfaces (2023) (0)
An adaptive active sound quality control scheme for engine order balancing (2009) (0)
Frequency dependent selection of control sensors in multi-channel acoustic control (2020) (0)
Validation of the 3D stochastic turbulence reconstruction method with the Gaussian filter (2016) (0)
Co-simulation approach for coupling a state estimator with aeroelastic multi-body models (2016) (0)
Wave form replication using combined Adaptive and Iterative Learning Control (2015) (0)
Suppression of flow-induced noise and vibrations by locally resonant metamaterials (2020) (0)
Hybrid finite element - wave based method in acoustics (2004) (0)
A direct hybrid finite element/wave based modelling technique for vibro-acoustic analysis (2006) (0)
Response surface based optimisation algorithms for non-deterministic dynamic finite element analysis (2007) (0)
Conceptual and reduced vehicle models performance enhancement (2010) (0)
A hierarchical quantification of inter- & intra-batch vibro-acoustic variability of deep drawn parts (2022) (0)
Wave based modelling for vibro-acoustics: basic principles and examples (2011) (0)
A Non-destructive Method to Verify the Glenosphere - Baseplate Assembly in RSA (2016) (0)
Accuracy of vibro-acoustic simulations with approximative multilayer damping models (2014) (0)
Active sound quality control of engine noise (2009) (0)
An accelerated deflation preconditioner for parametric systems based on subspace recycling (2022) (0)
Vibration-based Fixation Assessment of Tibial TKA Components: A Numerical and Experimental In Vitro Study (2014) (0)
Modelling tools for inverse characterisation of viscoelastic damping treatments (2015) (0)
The influence of adhesive materials on the transverse vibrations of single lap joints: an experimental study (2023) (0)
Airfoil trailing-edge noise prediction combining a random particle-mesh method with a Helmholtz solver (2018) (0)
Honeycomb Core with Local Resonance Stopband Behaviour (2013) (0)
Auralization as a tool for evaluating a musical instrument (2015) (0)
A multi-physical loudspeaker model including experimental modal information of the membrane (2014) (0)
ACOUSTICS2008/3077 An Active Network Representation to Predict the Flow Noise Characteristics of Corrugated Ducts (2008) (0)
Simultaneous parametric estimation of shape and impedance of a scattering surface using a multi-frequency fast indirect boundary element method (2022) (0)
Interval field implementations for spatial uncertainty processing in non-deterministic FE analysis (2013) (0)
Finite element analysis enhanced with subdivision surface boundary representations (2017) (0)
An Efficient Wave Based Method for Three-Dimensional Acoustic Scattering and Transmission Problems (2009) (0)
Accurate Coupling Information for Hybrid CAA-Methodologies Based on Compressible Flow Simulations (2010) (0)
Researcher Mobility Programs in European Noise Research (2008) (0)
Comparison between the wave finite element and shift cell operator method for calculating dispersion diagrams of periodic metamaterial structures (2021) (0)
An iterative solver for parallel computation of numerical coupled vibro-acoustic systems: implementation and validation (2004) (0)
A novel time varying parametric model order reduction scheme with (2013) (0)
An efficient Wave Based Method for axisymmetric acoustic-poroelastic problems (2012) (0)
"eLiQuiD" - Best Engineering Training in Electric, Lightweight and Quiet Driving (2016) (0)
A Combination of Different Flow and Acoustic Prediction Techniques with Application to 2D Cavity Flow Noise (2005) (0)
RMA-CNN: A Residual Mixed-Domain Attention CNN for Bearings Fault Diagnosis and its Time-Frequency Domain Interpretability (2023) (0)
Interval and fuzzy eigenfrequency analysis of an uncertain mechanical structure using a substructuring technique: first outline (2005) (0)
Continuous vs Discrete Adjoint Method for Model Parameter Sensitivity of Multibody Systems Using Fncf (2021) (0)
Virtual Sensing Application Cases Exploiting Various Degrees of Model Complexity (2021) (0)
URANS analysis of flow-induced cavity oscillation (2006) (0)
Strategic distribution of resonators' parameters for broadband vibration mitigation (2023) (0)
On increase of the insertion loss of a double-panel by active noise control (1993) (0)
Design sensitivity analysis of 3D unbounded vibro-acoustic problems using the wave based method (2011) (0)
THE WAVE BASED METHOD: CURRENT STATE OF THE ART (2013) (0)
Fast Forced Vibration Response Calculations of Finite Periodic Structures Using a Wave Based Reduced Order Modelling Approach (2023) (0)
An efficient Wave Based Method to predict the response of multilayer systems containing poroelastic materials (2011) (0)
Optimization of the frequency averaged input power into plates with dynamic vibration absorbers using the Wave Based Method (2013) (0)
Geometrical design tolerance analysis of a satellite telescope based on the fuzzy finite element method (2006) (0)
Experimental Study on the Rotor Dynamics Influence upon the Modal Characteristics of an Induction Machine (2017) (0)
Efficient dispersion curve computations for periodic vibro-acoustic structures using the (generalized) Bloch mode synthesis (2022) (0)
Energy-based component mode synthesis for efficient uncertainty assessment in substructured FE models (2007) (0)
Amiet theory extension for compact airfoil noise prediction (2015) (0)
Correction to: Semi-analytic contact technique in a non-linear parametric model order reduction method for gear simulations (2021) (0)
Dynamics and Vibroacoustics 23-25 Apr 2013 Marrakech ( Morocco ) THE WAVE BASED METHOD : CURRENT STATE OF THE ART (2013) (0)
Passenger Vehicle Pass-by Noise Test Using Generalized Inverse Beamforming (2011) (0)
Analysis of tyre-road noise due to road discontinuity impacts (2007) (0)
A benchmark study on room acoustic simulations with various material input complexities (2023) (0)
A greedy sampling approach for the reduced order basis construction in parametric model order reduction for structural dynamics models (2016) (0)
Reliability Assesment of Uncertain Dynamical Linear Systems-Recent Advances (2008) (0)
A hybrid Boundary Element - Wave Based Method for 3D acoustic multiple scattering problems (2012) (0)
Study of damping in locally resonant metamaterials through unit cell modelling (2015) (0)
Acoustic Design Sensitivity Analysis of 3D vibro-acoustic problems using the Wave Based Method (2010) (0)
A Ring-based Tyre Model for the Prediction of Structure-borne Interior Tyre/Road Noise (2009) (0)
On the use of a novel wave based boundary condition for efficient subcomponent point impedance calculations (2009) (0)
Semi-analytic contact technique in a non-linear parametric model order reduction method for gear simulations (2017) (0)
Introduction and validation of a novel TPA method on experimental and industrial case (2009) (0)
OPTIMIZATION OF THE ADDITIVE MANUFACTURING PROCESS FOR GEOMETRICALLY COMPLEX VIBRO-ACOUSTIC METAMATERIALS (2019) (0)
Validation of a three-dimensional mapping scheme to couple mean flow data to high-order acoustic propagation solvers (2017) (0)
Dynamic analysis of structures with uncertain parameters using a non-probabilistic finite element method (2004) (0)
A novel modelling approach for the steady-state dynamic analysis of coupled vibro-acoustic systems (1999) (0)
Exhaust pipe noise radiation modelling: applicability of using the Fourier PSTD and DG methods (2012) (0)
A systematic simulation methodology for improving vehicle noise and vibration performance through multi-disciplinary optimization (2013) (0)
Vibrational Techniques to Assess the Initial Stability of Cementless Acetabular Implants : A Finite Element Study (2011) (0)
SUB-WAVELENGTH DAMAGE DETECTABILITY ASSESSMENT IN PERIODIC ASSEMBLIES USING A BLOCH MODELLING FRAMEWORK (2020) (0)
A Non-Linear Parametric Model Order Reduction Technique for Gear Contact Problems in Flexible Multibody Dynamics (2013) (0)
CAD-based design of active noise and vibration control solutions (2007) (0)
On the use of the wave based method for the dynamic analysis of flat plate assemblies (2004) (0)
Using numerical and experimental two-port determination techniques for the aeroacoustic characterization of confined subsonic flow applications (2011) (0)
An accelerated subspaces recycling strategy for the deflation of parametric linear systems based on model order reduction (2023) (0)
Advanced Deterministic Modelling Approaches for the Evaluation of Steady-State Interior Vehicle Acoustics (2012) (0)
Vehicle pass-by noise source localization using generalized inverse beamforming (2011) (0)
New features on noise, vibration and harshness posed by the next generation of vehicles (2014) (0)
Strain-based experimental modal analysis: reciprocity and mode scaling applied to beam-like structures using strain-to-displacement and mode curvature relations (2015) (0)
An adaptive order finite element method for poroelastic materials described through the Biot equations (2021) (0)
Vibro-acoustic characteristic of TorHex honeycomb sandwich panel (2010) (0)
Active multi-port characterization of a butterfly valve (2016) (0)
Fast vibro-acoustic response computations for finite periodic metamaterial plates using a generalized Bloch Mode Synthesis based sub-structuring approach (2022) (0)
Development and assessment of SNGR-methods for jet noise prediction (2005) (0)
Convergence study of phased geometrical acoustics using a low frequency reflection coefficient (2016) (0)
Prediction of modal deflections and frequency response functions from experimental data: The longest vector approach (2022) (0)
Loaded tooth contact analysis of spiral bevel gears with kinematically correct motion transmission (2018) (0)
On the use of a multi-level wave based modelling approach for the steady-state dynamic analysis of two-dimensional perforated solids (2009) (0)
On the effects of damping on wave propagation in periodic vibro-acoustic meta-materials (2015) (0)
A high-performance hybrid finite-element - wave based method for steady-state vibro-acoustic analysis (2005) (0)
Angle-dependent sound absorption estimation using a compact microphone array. (2021) (0)
Prediction capability for 2D-aero-acoustic problems based on a hybrid approach (2003) (0)
Coupling of Boundary Element and Wave Based Methods for the efficient solution of bounded acoustic problems with inclusions (2014) (0)
Combined uncertainty effects on the dynamic behaviour of mechanical structures based on the fuzzy ﬁnite element method (2007) (0)
Efficient calculation of SEA input parameters using a wave based substructuring technique (2008) (0)
Editorial for the ISMA 2010 Special Issue (2010) (0)
Application of the transformation method to assess response uncertainty of a vibro-acoustic structure (2004) (0)
Development of a hybrid wave based/fintie element prediction technique for aircraft interior acoustics (2006) (0)
Parameterized nonlinear model reduction for multibody simulation with uncertain parameters (2014) (0)
Substructuring based parametric reduced order modelling for large-scale dynamical systems containing viscoelasticity with application to bonded assemblies (2023) (0)
Methods and tools for model-based virtual sensors applied to condition monitoring (2016) (0)
Efficient vibro-acoustic model updating of localized properties using low-rank parametric model order reduction schemes (2017) (0)
Time-Domain Impedance Formulation based on (2006) (0)
Automated independent coordinates’ switching for the solution of stiff DAEs with the linearly implicit Euler method (2015) (0)
0 ) , ( ) , , , ( ) , , ( ) , ( ] [ ) ( tqtqR tqqQtqQqKqqM (2010) (0)
Automatic and Sampling-Free Parametric Model Order Reduction of Vibro-Acoustic Systems (2021) (0)
Application of the wave based prediction technique for structural problems with stress singularities (2006) (0)
Modal Acceleration to improve the efficiency of flexible multibody simulations (2010) (0)
Coupling of the finite element method and a Trefftz method for steady-state acoustic modelling (2003) (0)
Assessment of Uncertainty for Structural and Mechatronics Engineering Applications (2011) (0)
Towards an instrument for the intraoperative assessment of the initial stability of acetabular implants (2012) (0)
A semi-analytic/flexible bearing module combining multibody and parametric model order reduction (2015) (0)
Iterative learning control algorithms for the active control of impact noise (2005) (0)
On the use of B-spline functions in a wave based prediction technique for solving bounded Helmholtz problems (2009) (0)
Coupling of Component Models with Mismatching Interfaces for an Efficient NVH Vehicle Design (2022) (0)
An automated response surface based optimisation technique for the calculation of fuzzy envelope FRFs of models with uncertain properties (2006) (0)
Application of a Hybrid Boundary Element Wave Based Method on a 2D Multiple Scatterer Problem (2011) (0)
Use of flexible models in extended Kalman filtering for vehicle body force estimation (2015) (0)
Efficient TR-MUSIC damage detection in composites with a limited number of sensors (2020) (0)
On the use of local resonators to obtain low frequency band gaps in the global response of finite periodic panels (2012) (0)
A Trefftz-based prediction technique for the steady-state dynamic analysis of exterior coupled vibro-acoustic problems (1999) (0)
Corrigendum to “Benchmarking of finite-difference time-domain method and fast multipole boundary element method for room acoustics” [Appl. Acoust. 191 (2022) 108662] (2022) (0)
Corrigendum to “Probability that a band-gap extremum is located on the irreducible Brillouin-zone contour for the 17 different plane crystallographic lattices” [International Journal of Solids and Structures, 135 (2018) 26–36] (2020) (0)
Application of Model Order Reduction to Nonlinear Finite Element Tire Models for NVH Design (2019) (0)
On the use of hybrid finite element - wave based methods for steady-state acoustic analysis (2005) (0)
Prediction of Internal Responses Due to Changes in Boundary Conditions Using System Frequency Response Functions (2021) (0)
Application of a topology map for the automatic generation of coupled vibro-acoustic wave models (2001) (0)
On the use of a Trefftz-based wave based prediction technique for solving Helmholtz problems involving multiple scatterers (2009) (0)
On the prediction of the reflection, transmission and absorption coefficient of vibro-acoustic metamaterials (2016) (0)
On the radiation efficiency of local resonance stop bands (2013) (0)
Simulation Techniques for Mid-Frequency Vibro-Acoustics Virtual Tools For Real Problems (2010) (0)
Approximations in system-level GMP model reduction for flexible MBS (2010) (0)
A novel wave based modelling approach for the mid-frequency analysis of Helmholtz problems with multiple inclusions (2009) (0)
WAVE CONVERSION PROCESS IN LIGHTWEIGHT STRUCTURES: DIFFUSION THROUGH DEFECTS IN THE TRANSITION BANDWIDTH (2017) (0)
Vibration attenuation in pipes: design and experimental validation of a resonant metamaterial solution (2017) (0)
A Hybrid Finite Element - Wave Based Modelling Technique for the Analysis of 2D Sound Absorbing Biot's Poroelastic Materials (2016) (0)
Coupling non-conforming NURBS patches in isogeometric analysis using virtual refinement and a master-slave formulation (2016) (0)
An efficient wave based method for three-dimensional helmholtz problems in unbounded domains (2008) (0)
CAE approach for the optimal design of an active suspension system (2009) (0)
Phased geometrical acoustics in a small cabin (2014) (0)
On the potential of the wave based method for the efficient optimisation of local vibration control treatments for structural components (2012) (0)
Computer-aided integrated design for mechatronic systems with varying structural flexibilities (2008) (0)
Micro-scale finite element study of the damping in unidirectional fiber reinforced composites (2016) (0)
Reducing flow-induced noise and vibrations by resonant metamaterials with multiple stop band behavior (2021) (0)
Frequency dependency and anisotropy of the elastic constants of porous materials and their influence on the usage in building acoustical applications (2007) (0)
Validating the modeling of sandwich structures with constrained layer damping using fractional derivative models (2016) (0)
Active control of engine noise transmitted into cavities: simulation, experimental validation and sound quality assessment (2008) (0)
Fuzzy dynamic finite element analysis of models with geometrical uncertainties (2007) (0)
NVH analysis and optimisation of lightweight structures (2016) (0)
Concept Modelling Techniques in the Design of a Novel Energy Harvesting System (2012) (0)
Reduced state space model for the substructuring of nonlinear multibody mechanisms (2011) (0)
Interval fields on FE model input data and on displacement output patterns in static FE-analysis (2012) (0)
Concept Modelling Techniques for the Development of a Novel Energy Harvesting Device for Car Suspension Systems (2012) (0)
DESIGN SENSITIVITY ANALYSIS OF STRUCTURAL-ACOUSTIC PROBLEMS USING THE WAVE BASED METHOD (2012) (0)
Adaptive control schemes for engine sound quality improvement (2008) (0)
Vibro-acoustic metamaterials research at KU Leuven in view of lightweight NVH solutions (2016) (0)
Experimental and numerical investigation of lightweight vibro-acoustic metamaterials (2015) (0)
Polynomial filters for camera-based structural intensity analysis on curved plates (2023) (0)
Model Order Reduced Transient Acoustic Finite Element Simulations with Impedance Boundary Conditions (2021) (0)
The impact of active noise control on the perceived sound quality (2007) (0)
On the coupling of wave based models with higher order finite elements for structural-acoustic analysis (2007) (0)
A combined 1D-3D simulation approach for the energy analysis of a mechanical drive train (2012) (0)
Material Properties Of Fourth-Generation Composite Sawbones Determined Through Modal Analysis (2015) (0)
Increasing the accuracy of MDOF raod reproduction experimental validation (2005) (0)
DESIGN OPTIMIZATION OF 3D UNBOUNDED VIBRO-ACOUSTIC PROBLEMS USING THE WAVE BASED METHOD (2012) (0)
Design sensitivity analysis of structural-acoustic systems using FEM and WBM (2010) (0)
A Wave Based Unit Cell Method to predict absorption and transmission coefficients of poroelastic materials containing periodic inclusions (2015) (0)
Acoustic impedance sensitivity analysis and design optimization using the wave based method (2012) (0)
THE USE OF ACOUSTIC INFORMATION FOR THE INTRA-OPERATIVE DETECTION OF PRIMARY CEMENTLESS HIP STEM STABILITY AND FRACTURE PREVENTION: PRELIMINARY RESULTS (2016) (0)
Parametric analysis of a triple core periodic unit cell including a middle random core (2019) (0)
Surface impedance prediction using phased geometrical acoustics, a small reverberant chamber and optimization (2015) (0)
An efficient three-dimensional multi-level Wave Based Method for interior acoustic problems with discontinuous boundary conditions (2015) (0)
Active sound quality control of engine noise transmitted into cavities (2008) (0)
Offline adaptation of co-simulation time steps by leveraging past co-simulation runs in multi-level mechatronic systems (2022) (0)
acoustic shape design sensitivity analysis using the wave based method (2014) (0)
An efficient wave based method for steady-state structural dynamics (2008) (0)
Model order reduction for multi-scale strength simulation of composite materials: Preliminary framework (2019) (0)
VIRTUAL SENSING TECHNIQUES FOR THE ESTIMATION OF JOINTS CONCEPT MODELS PARAMETERS (2019) (0)
Reverberation time and audibility in phased geometrical acoustics using plane or spherical wave reflection coefficients (2019) (0)
ON THE STRUCTURAL CHARACTERIZATION THROUGH K-SPACE METHODS: ASSESSMENTS AND VALIDATIONS (2019) (0)
An adaptive MOR method for vibro-acoustic analysis of dynamic systems with viscoelastic damping (2019) (0)
Structural health monitoring using vibro-acoustic information (Poster presentation) (2015) (0)
On the use of an efficient wave based method for steady-state structural dynamic analysis (2008) (0)
EFFECTS OF DISCRETIZATION ON REDUCIBILITY FOR PDE MODELS WITH VARIABLE GEOMETRY : A PRELIMINARY STUDY (2018) (0)
A wave based method for the steady-state dynamic analysis of structural-acoustic problems (2005) (0)
Improvement of the performance of the wave based method for the steady-state prediction of structural bending problems (2006) (0)
Two-port characterization of flow-acoustic effects in a rectangular muffler geometry (2010) (0)
Model order reduction with Krylov subspaces of exterior acoustic BEM systems (2019) (0)
A reduced-order cutFEM approach to model complex moving sound sources (2023) (0)
Finite element method in structural acoustics (2001) (0)
A modified turbulence spectra for semi-analytical airfoil noise prediction (2015) (0)
Modelling, analysis and experimental validation of vibro-acoustic locally resonant metamaterials including damping (2017) (0)
Simulation-Based Optimization of an Active Noise and Vibration Control Solution (2007) (0)
A system-level modal description of flexible multibody dynamics (2009) (0)
A derivation of a local integration error estimate and development of an automatic time step control algorithm for the generalized-alpha scheme for mechatronic systems (2013) (0)
Bearing Frictional Power Loss Models (Poster) (2011) (0)
An isogeometric indirect boundary element method for modeling steady-state acoustic problems with open boundaries (2015) (0)
Model order reduction of mechanical systems with complex damping treatments - Balancing prediction accuracy and speed (2017) (0)
An Extended Modal Identification for Linear Periodically Time-Varying Systems Based on Stability-Preserving State Transformation (2015) (0)
Uncertainty estimation in multi-port measurements (2015) (0)
Model-based virtual force measurements on two industrial cases (2016) (0)
A Trefftz Based Prediction Technique for the Dynamic Response of Poroelastic Media in Vibro-Acoustic Applications (2013) (0)
Impact of the acoustic transmission path on the vibro-acoustic performance of sandwich panels with structural cores with bandgap behavior (2022) (0)
Prediction and experimental validation of the sound field above a patchwork of absorbing materials (2005) (0)
Constrained State and Input Estimation for a MacPherson Suspension Using the Unscented Kalman Filter and a 3D Multibody Model (2015) (0)
Numerical Investigation of the Acoustic Scattering Behavior of a Butterfly Valve (2017) (0)
Control Design for an Emulator of Mechatronic Powertrain Dynamics: A Case Study (2020) (0)
Tests on the vibro-acoustic behaviour of a brushless DC-motor (2007) (0)
Quantification of the Equivalent Sources of Different Tire noise Models by Means of the ASQ Technique (2009) (0)
Spatial uncertainty analysis in FE problems using interval fields (2012) (0)
Development of a Procedure for Multi-axial Road Load Reproductions on an Exhaust Test Rig (2009) (0)
Approximate boundary formulations to acoustic and associated fluid-structure problems (1997) (0)
Experimental Setup and Method to Measure the Local Micromotion between Hip Implant and Femur: The Influence of Adopting a Rigid Body Assumption (2016) (0)
Order-Based Modal Analysis: a technique for estimating the modal parameters in the rotating machinery field (2016) (0)
VIRTUAL SENSOR APPROACHES FOR ESTIMATING FORCES IN TRANSPORT SYSTEM APPLICATIONS (2017) (0)
Grid convergende of aero-acoustic sources using LES with second and fourth order discretization of convective terms (2006) (0)
Modification of stochastic noise source modeling for turbulent jets (2005) (0)
Comparison of the Vibrational Behavior between Replica and Cadaveric Bone (2014) (0)
An efficient Wave Based modelling approach for the steady-state dynamic analysis of two-dimensional solids with holes (2009) (0)
Multi-physical modelling and analysis of lubricated transmissions using a coupled finite element approach (2022) (0)
A response surface optimisation algorithm for interval and fuzzy frequency response function calculation of imprecisely defined structures (2006) (0)
Sparse Damage Detection with Complex Group Lasso and Adaptive Complex Group Lasso (2022) (0)
Interval methods for numerical structural dynamic analysis with uncertain parameters (2008) (0)
Resonant metamaterial designs for a broadband mitigation of flow-induced vibrations (2021) (0)
Uncertainty analysis in fuzzy dynamic response prediction using MSC.Nastran (2004) (0)
Vibroacoustic predictions in a rocket launch environment using the hybrid finite element - wave based approach (2011) (0)
On the robustness of a model-based inverse force identification applied on a structure submerged in different media (2020) (0)
Design sensitivity of Zwicker's Loudness using Wave Based Method (2010) (0)
Detection of Suboptimal Assembly of the Glenoidal Component in Reverse Shoulder Arthroplasty : Development of an Intra-Operative Measurement Protocol (2009) (0)
The effect of edge constraints on the surface normal impedance of a layer of elastic porous material (1995) (0)
Evaluation of tire noise models used in vehicle pass-by sound synthesis (2010) (0)
THE USE OF THE WOODPECKER INSTRUMENT TO FOLLOW UP IMPLANT INSERTION IN CEMENTLESS THA: AN IN VITRO STUDY (2018) (0)
Efficient flexible contact simulation by means of a consistent LCP/generalized-alpha scheme and static modes switching (2012) (0)
Efficient treatment of singularities in wave based models for 2D acoustic scattering problems (2012) (0)
Single and multi-objective optimization of a gearbox considering dynamic performance and assemblability (2022) (0)
The Suboptimal Assembly of the Glenoidal Component in Reverse Shoulder Arthroplasty: The Mechanical Influence of Soft Tissue Interpositioning and Glenosphere Misalignment (2011) (0)
Validation of a wind turbine gearbox strain simulation model in service to virtual sensing (2023) (0)
On the use of an impedance model for acoustic damping treatment: a numerical validation study using a wave based prediction technique (1997) (0)
Iterative learning control for an active exhaust noise attenuation valve (2009) (0)
Towards a concurrent optimization of mechatronic systems with configuration-dependent dynamics (2007) (0)
Vibration damping of flexible rotating rings using simple and double modes tuned vibration absorbers (2021) (0)
Design and validation of a low-cost acoustic anechoic chamber (2020) (0)
Modelling Techniques for Vibro-Acoustic Dynamics of Poroelastic Materials (2014) (0)
Rated life potential of gearbox model based force estimates (2014) (0)
Erratum: “Impact of the unit cell choice on the efficiency of dispersion curve calculations using GBMS” [ASME J. Vibr. Acoust., 2022, 144(2), p. 024501; DOI: 10.1115/1.4051817] (2022) (0)
Performance of isogeometric analysis for 2D Helmholtz problems: A study of dispersion characteristics, convergence rates and efficient quadrature (2014) (0)
An efficient Trefftz based method for acoustic porous material modelling (2009) (0)

This paper list is powered by the following services:

What Schools Are Affiliated With Wim Desmet?

Wim Desmet is affiliated with the following schools:

KU Leuven

Wim Desmet's Academic­Influence.com Rankings

Why Is Wim Desmet Influential?

Wim Desmet's Published Works

Published Works

What Schools Are Affiliated With Wim Desmet?

Wim Desmet's AcademicInfluence.com Rankings