Ann-Christine Albertsson
#113,004
Most Influential Person Now
Swedish chemist
Ann-Christine Albertsson's AcademicInfluence.com Rankings
Ann-Christine Albertssonchemistry Degrees
Chemistry
#2291
World Rank
#3181
Historical Rank
Polymer Chemistry
#49
World Rank
#52
Historical Rank
Download Badge
Chemistry
Ann-Christine Albertsson's Degrees
- PhD Polymer Chemistry KTH Royal Institute of Technology
- Masters Chemical Engineering KTH Royal Institute of Technology
Why Is Ann-Christine Albertsson Influential?
(Suggest an Edit or Addition)According to Wikipedia, Ann-Christine Albertsson is a Swedish chemist, currently Professor at Royal Institute of Technology and the Editor-in-Chief of American Chemical Society's Biomacromolecules. Her research interest are biomacromolecules and polymers.
Ann-Christine Albertsson's Published Works
Published Works
- Recent developments in ring opening polymerization of lactones for biomedical applications. (2003) (1320)
- From lactic acid to poly(lactic acid) (PLA): characterization and analysis of PLA and its precursors. (2011) (539)
- The mechanism of biodegradation of polyethylene (1987) (506)
- Biodegradable and electrically conducting polymers for biomedical applications (2013) (465)
- Aliphatic Polyesters: Synthesis, Properties and Applications (2002) (411)
- Degradable polymer microspheres for controlled drug delivery (2002) (395)
- Controlled Ring-Opening Polymerization: Polymers with designed Macromolecular Architecture (2002) (322)
- Novel pH-sensitive chitosan hydrogels: swelling behavior and states of water (2000) (307)
- Enzyme catalyzed synthesis of polyesters (2005) (226)
- Weight losses and molecular weight changes correlated with the evolution of hydroxyacids in simulated in vivo degradation of homo-and copolymers of PLA and PGA (1996) (212)
- Polyesters based on diacid monomers. (2003) (204)
- Chemical and morphological changes of environmentally degradable polyethylene films exposed to thermo-oxidation (1999) (204)
- Oxygen barrier materials from renewable sources: Material properties of softwood hemicellulose‐based films (2006) (197)
- Effect of lactic/glycolic acid side chains on the thermal degradation kinetics of chitosan derivatives (2000) (186)
- Recent developments in enzyme-catalyzed ring-opening polymerization. (2008) (184)
- Degradable polyethylene: fantasy or reality. (2011) (182)
- Degradation product pattern and morphology changes as means to differentiate abiotically and biotically aged degradable polyethylene (1995) (175)
- The three stages in degradation of polymers—polyethylene as a model substance (1988) (167)
- Designed to degrade (2017) (166)
- Influence of molecular structure on the degradation mechanism of degradable polymers: In vitro degradation of poly(trimethylene carbonate), poly(trimethylene carbonate-co-caprolactone), and poly(adipic anhydride) (1995) (160)
- The influence of biotic and abiotic environments on the degradation of polyethylene (1990) (157)
- Recent Advances in Ring-Opening Polymerization of Lactones and Related Compounds (1995) (155)
- Degradable and Electroactive Hydrogels with Tunable Electrical Conductivity and Swelling Behavior (2011) (147)
- Mechanism of Ring-Opening Polymerization of 1,5-Dioxepan-2-one and l-Lactide with Stannous 2-Ethylhexanoate. A Theoretical Study (2001) (145)
- Biodegradable Polymers from Renewable Sources. New Hemicellulose-Based Hydrogels (2001) (143)
- The shape of the biodegradation curve for low and high density polyethenes in prolonged series of experiments (1980) (142)
- Polylactide stereocomplexation leads to higher hydrolytic stability but more acidic hydrolysis product pattern. (2010) (142)
- Biodegradable polymers and environmental interaction (1998) (139)
- The biodegradation of amorphous and crystalline regions in film-blown poly(ε-caprolactone) (2000) (138)
- Facile synthesis of degradable and electrically conductive polysaccharide hydrogels. (2011) (137)
- Polymers from Renewable Resources (2002) (136)
- In Situ Synthesis of Magnetic Field-Responsive Hemicellulose Hydrogels for Drug Delivery (2015) (133)
- Environmental degradation of polyethylene (2004) (133)
- Biodegradation of synthetic polymers. II. A limited microbial conversion of 14C in polyethylene to 14CO2 by some soil fungi (1978) (130)
- Rapid (bio)degradation of polylactide by mixed culture of compost microorganisms—low molecular weight products and matrix changes (2000) (128)
- Synthesis and characterization of pH‐sensitive hydrogels based on chitosan and D,L‐lactic acid (1999) (124)
- Molecular Weight Changes and Polymeric Matrix Changes Correlated with the Formation of Degradation Products in Biodegraded Polyethylene (1998) (124)
- Surface- and bulk-modified galactoglucomannan hemicellulose films and film laminates for versatile oxygen barriers. (2006) (122)
- Barrier films from renewable forestry waste. (2010) (117)
- Porosity and pore size regulate the degradation product profile of polylactide. (2011) (112)
- Branched poly(lactide) synthesized by enzymatic polymerization: effects of molecular branches and stereochemistry on enzymatic degradation and alkaline hydrolysis. (2007) (110)
- Structural change and swelling mechanism of pH-sensitive hydrogels based on chitosan and D,L-lactic acid (1999) (109)
- Crucial Differences in the Hydrolytic Degradation between Industrial Polylactide and Laboratory-Scale Poly(L-lactide) (2012) (107)
- Drilling into magma and the implications of the Iceland Deep Drilling Project (IDDP) for high-temperature geothermal systems worldwide (2014) (104)
- Degradable aliphatic polyesters (2002) (103)
- Degradable polymers for the future (1995) (102)
- Achieving Micelle Control through Core Crystallinity (2013) (101)
- Susceptibility of enhanced environmentally degradable polyethylene to thermal and photo-oxidation (1992) (100)
- Migration and hydrolysis of hydrophobic polylactide plasticizer. (2010) (99)
- Biodegradable polymers from renewable sources: rheological characterization of hemicellulose-based hydrogels. (2005) (98)
- Solid waste treatment within the framework of life-cycle assessment (1995) (97)
- Electroactive porous tubular scaffolds with degradability and non-cytotoxicity for neural tissue regeneration. (2012) (97)
- Customizing the hydrolytic degradation rate of stereocomplex PLA through different PDLA architectures. (2012) (96)
- The mode of action of corn starch and a pro-oxidant system in LDPE : influence of thermo-oxidation and UV-irradiation on the molecular weight changes (1997) (95)
- Microbial and oxidative effects in degradation of polyethene (1980) (95)
- ε-Decalactone: a thermoresilient and toughening comonomer to poly(L-lactide). (2013) (93)
- Single-step covalent functionalization of polylactide surfaces. (2005) (93)
- Controlled synthesis of star-shaped L-lactide polymers using new spirocyclic tin initiators. (2002) (93)
- Thermodynamic Presynthetic Considerations for Ring-Opening Polymerization (2016) (92)
- Tuning the release rate of acidic degradation products through macromolecular design of caprolactone-based copolymers. (2007) (92)
- Resilient bioresorbable copolymers based on trimethylene carbonate, L-lactide, and 1,5-dioxepan-2-one. (2006) (91)
- The concept of the Iceland deep drilling project (2014) (86)
- Molecular architecture of electroactive and biodegradable copolymers composed of polylactide and carboxyl-capped aniline trimer. (2010) (86)
- Elastomeric hydrolyzable porous scaffolds: copolymers of aliphatic polyesters and a polyether-ester. (2005) (86)
- Design of resorbable porous tubular copolyester scaffolds for use in nerve regeneration. (2009) (83)
- Enhanced Electrical Conductivity by Macromolecular Architecture: Hyperbranched Electroactive and Degradable Block Copolymers Based on Poly(ε-caprolactone) and Aniline Pentamer (2010) (82)
- Facile and Green Approach towards Electrically Conductive Hemicellulose Hydrogels with Tunable Conductivity and Swelling Behavior (2014) (80)
- Ring-Opening Polymerization of Lactones and Lactides with Sn(IV) and Al(III) Initiators (2002) (78)
- PY-GC/MS an effective technique to characterizing of degradation mechanism of poly (L-lactide) in the different environment (2000) (78)
- Synthesis of copolymers of 1,3-dioxan-2-one and oxepan-2-one using coordination catalysts (1994) (77)
- Surface functionalization of degradable polymers by covalent grafting. (2006) (75)
- Polymerization of 1,5-dioxepan-2-one. II: Polymerization of 1,5-dioxepan-2-one and its cyclic dimer, including a new procedure for the synthesis of 1,5-dioxepan-2-one (1989) (74)
- A strategy for the covalent functionalization of resorbable polymers with heparin and osteoinductive growth factor. (2008) (73)
- New biodegradable polymers from renewable sources. High molecular weight poly(ester carbonate)s from succinic acid and 1,3-propanediol (2000) (72)
- Surface modification changes the degradation process and degradation product pattern of polylactide. (2010) (72)
- Abiotic degradation products from enhanced environmentally degradable polyethylene (1994) (72)
- Barrier and mechanical properties of montmorillonite/polyesteramide nanocomposites (2002) (72)
- Tuning the Degradation Profiles of Poly(l-lactide)-Based Materials through Miscibility (2013) (70)
- A robust pathway to electrically conductive hemicellulose hydrogels with high and controllable swelling behavior (2014) (70)
- Controlled ring-opening polymerization of L-lactide and 1,5-dioxepan-2-one forming a triblock copolymer (2000) (67)
- Dihydroxy-Terminated Poly(l-lactide) Obtained by Controlled Ring-Opening Polymerization: Investigation of the Polymerization Mechanism (2000) (67)
- Covalent grafting of poly(L-lactide) to tune the in vitro degradation rate. (2007) (67)
- Heterogeneous biodegradation of polycaprolactone – low molecular weight products and surface changes (2002) (66)
- Conceptual approach to renewable barrier film design based on wood hydrolysate. (2011) (66)
- Dicarboxylic Acids and Ketoacids Formed in Degradable Polyethylenes by Zip Depolymerization through a Cyclic Transition State (1997) (64)
- In vitro and in vivo degradation profile of aliphatic polyesters subjected to electron beam sterilization. (2011) (64)
- Resorbable and highly elastic block copolymers from 1,5-dioxepan-2-one and L-lactide with controlled tensile properties and hydrophilicity. (2002) (64)
- Trapping of volatile low molecular weight photoproducts in inert and enhanced degradable LDPE (1998) (64)
- Biodegradation of polyethylene and the influence of surfactants (1988) (63)
- New developments in speciality polymers: polymeric stabilizers (1985) (61)
- Degradation of enhanced environmentally degradable polyethylene in biological aqueous media: mechanisms during the first stages (1994) (59)
- Osteogenic Differentiation by Rat Bone Marrow Stromal Cells on Customized Biodegradable Polymer Scaffolds (2010) (59)
- Electroactive Hydrophilic Polylactide Surface by Covalent Modification with Tetraaniline (2012) (58)
- Rapid test methods for analyzing degradable polyolefins with a pro‐oxidant system (2001) (58)
- Industrial utilization of tin-initiated resorbable polymers: synthesis on a large scale with a low amount of initiator residue. (2007) (58)
- Synthesis and Characterization of Biodegradable Homopolymers and Block Copolymers Based on 1,5-Dioxepan-2-one (1994) (57)
- Tuning the polylactide hydrolysis rate by plasticizer architecture and hydrophilicity without introducing new migrants. (2010) (57)
- Universal Two-Step Approach to Degradable and Electroactive Block Copolymers and Networks from Combined Ring-Opening Polymerization and Post-Functionalization via Oxidative Coupling Reactions (2011) (56)
- Random introduction of degradable linkages into functional vinyl polymers by radical ring-opening polymerization, tailored for soft tissue engineering (2012) (56)
- Degradable porous scaffolds from various L-lactide and trimethylene carbonate copolymers obtained by a simple and effective method. (2009) (55)
- L-Lactide macromonomer synthesis initiated by new cyclic tin alkoxides functionalized for brushlike structures (2001) (53)
- Solid phase microextraction (SPME) as an effective means to isolate degradation products in polymers (1997) (53)
- Versatile functionalization of polyester hydrogels with electroactive aniline oligomers (2011) (53)
- New biodegradable polymers from renewable sources : Polyester-carbonates based on 1,3-Propylene-co-1,4-cyclohexanedimethylene succinate (2001) (53)
- Ring‐opening polymerization of 1,5‐dioxepan‐2‐one initiated by a cyclic tin–alkoxide initiator in different solvents (1999) (52)
- Finalizing the properties of porous scaffolds of aliphatic polyesters through radiation sterilization. (2006) (51)
- Copolymerization of 2-methylene-1,3-dioxepane and glycidyl methacrylate, a well-defined and efficient process for achieving functionalized polyesters for covalent binding of bioactive molecules. (2013) (51)
- Hemicellulose-based multifunctional macroinitiator for single-electron-transfer mediated living radical polymerization. (2011) (50)
- Design of renewable hydrogel release systems from fiberboard mill wastewater. (2010) (49)
- Transfer of Biomatrix/Wood Cell Interactions to Hemicellulose-Based Materials to Control Water Interaction. (2017) (49)
- Quantitative determination of degradation products an effective means to study early stages of degradation in linear and branched poly(butylene adipate) and poly(butylene succinate) (2004) (49)
- Synthesis of degradable crosslinked polymers based on 1,5-dioxepan-2-one and crosslinker of bis-?-caprolactone type (1997) (48)
- Sterilization, storage stability and in vivo biocompatibility of poly(trimethylene carbonate)/poly(adipic anhydride) blends. (2000) (48)
- Properties of injection moulded starch/synthetic polymer blends—I. Effect of processing parameters on physical properties (1996) (48)
- Nanoclay effects on the degradation process and product patterns of polylactide (2012) (48)
- Minimization of residual tin in the controlled Sn(II)octoate-catalyzed polymerization of epsilon-caprolactone. (2008) (48)
- Loss of stability by migration and chemical reaction of Santonox® R in branched polyethylene under anaerobic and aerobic conditions (2006) (48)
- Wood hydrolysate barriers: performance controlled via selective recovery. (2012) (47)
- Aspects of biodeterioration of inert and degradable polymers (1993) (47)
- Homocomposites of Polylactide (PLA) with Induced Interfacial Stereocomplex Crystallites (2015) (46)
- Alkenyl-Functionalized Precursors for Renewable Hydrogels Design (2009) (46)
- Protein release from galactoglucomannan hydrogels: influence of substitutions and enzymatic hydrolysis by beta-mannanase. (2008) (45)
- Thermal and Mechanical Properties of Polyurethanes Derived from Mono‐ and Disaccharides (1997) (45)
- Effect of thermal-oxidative ageing on mechanical, chemical and thermal properties of recycled polyamide 66 (1997) (45)
- ESI-MS Reveals the Influence of Hydrophilicity and Architecture on the Water-Soluble Degradation Product Patterns of Biodegradable Homo- and Copolyesters of 1,5-dioxepan-2-one and ε-Caprolactone (2008) (45)
- Controllable degradation product migration from cross-linked biomedical polyester-ethers through predetermined alterations in copolymer composition. (2007) (45)
- A Microspheric System: Hemicellulose-based Hydrogels (2008) (45)
- Solid-phase microextraction for qualitative and quantitative determination of migrated degradation products of antioxidants in an organic aqueous solution. (2005) (45)
- Ring-Closing Depolymerization: A Powerful Tool for Synthesizing the Allyloxy-Functionalized Six-Membered Aliphatic Carbonate Monomer 2-Allyloxymethyl-2-ethyltrimethylene Carbonate (2014) (45)
- Biocompatibility of Polyester Scaffolds with Fibroblasts and Osteoblast-like Cells for Bone Tissue Engineering (2010) (44)
- Enzyme-Catalyzed Ring-Opening Polymerization of Seven-Membered Ring Lactones Leading to Terminal-Functionalized and Triblock Polyesters (2006) (44)
- Simple Route to Size-Tunable Degradable and Electroactive Nanoparticles from the Self-Assembly of Conducting Coil–Rod–Coil Triblock Copolymers (2011) (44)
- Preparation and characterisation of poly(adipic anhydride) microspheres for ocular drug delivery (1996) (44)
- Biodegradation of synthetic polymers. III. The liberation of 14CO2 by molds like fusarium redolens from 14C labeled pulverized high-density polyethylene† (1978) (43)
- Electron beam-induced graft polymerization of acrylic acid and immobilization of arginine-glycine-aspartic acid-containing peptide onto nanopatterned polycaprolactone. (2004) (41)
- Polyester copolymer scaffolds enhance expression of bone markers in osteoblast-like cells. (2010) (41)
- Prediction of mechanical properties of recycled fiberglass reinforced polyamide 66 (1996) (41)
- Susceptibility of starch-filled and starch-based LDPE to oxygen in water and air (1997) (41)
- The influence of composition of porous copolyester scaffolds on reactions induced by irradiation sterilization. (2008) (40)
- Degradable amorphous scaffolds with enhanced mechanical properties and homogeneous cell distribution produced by a three-dimensional fiber deposition method. (2012) (40)
- Increased biodegradation of LDPE with nonionic surfactant (1993) (40)
- Degradation Products of Aliphatic and Aliphatic-Aromatic Polyesters (2008) (40)
- Copolymerization and polymer blending of trimethylene carbonate and adipic anhydride for tailored drug delivery (1999) (39)
- A Versatile Single-Electron-Transfer Mediated Living Radical Polymerization Route to Galactoglucomannan Graft-Copolymers with Tunable Hydrophilicity (2011) (39)
- Advances in Polymer Science (2011) (39)
- Turning hardwood dissolving pulp polysaccharide residual material into barrier packaging. (2013) (39)
- In Situ Cross-Linking of Stimuli-Responsive Hemicellulose Microgels during Spray Drying (2015) (39)
- Degradation Profile of Poly(ϵ‐caprolactone)–the Influence of Macroscopic and Macromolecular Biomaterial Design (2007) (39)
- Effect of endothelial cells on bone regeneration using poly(L-lactide-co-1,5-dioxepan-2-one) scaffolds. (2011) (39)
- Identification by headspace gas chromatography-mass spectrometry of in vitro degradation products of homo-and copolymers of L- and D,L-lactide and 1,5-dioxepan-2-one (1994) (39)
- Effect of processing additives on (bio)degradability of film-blown poly(ε-caprolactone) (1998) (38)
- Solid-phase extraction and subsequent gas chromatography-mass spectrometry analysis for identification of complex mixtures of degradation products in starch-based polymers (1996) (38)
- Drug Diffusion in Neutral and Ionic Hydrogels Assembled from Acetylated Galactoglucomannan (2009) (38)
- Degradable Polymers. I. Synthesis, Characterization, and Long-Term in Vitro Degradation of a 14C-Labeled Aliphatic Polyester (1986) (38)
- Thiolated hemicellulose as a versatile platform for one-pot click-type hydrogel synthesis. (2015) (38)
- Copolymers of 1,5-dioxepan-2-one and L- or D,L-dilactide: Hydrolytic degradation behavior (1994) (37)
- Adjustable degradation properties and biocompatibility of amorphous and functional poly(ester-acrylate)-based materials. (2014) (37)
- Degradable polyesters as biomaterials (1988) (37)
- The environmental influence in enzymatic polymerization of aliphatic polyesters in bulk and aqueous mini-emulsion (2010) (37)
- Enzymatic degradation of monolayer for poly(lactide) revealed by real-time atomic force microscopy: effects of stereochemical structure, molecular weight, and molecular branches on hydrolysis rates. (2008) (37)
- Influence of low molecular weight lactic acid derivatives on degradability of polylactide (2000) (37)
- Improved polyimide/metal adhesion by chemical modification approaches (2001) (36)
- Degradable Polymers. II. Synthesis, Characterization, and Degradation of an Aliphatic Thermoplastic Block Copolyester (1986) (36)
- Polymerization of 1,5-dioxepan-2-one. I: Synthesis and characterization of the monomer 1,5-dioxepan-2-one and its cyclic dimer 1,5,8,12-tetraoxacyclotetradecane-2,9-dione (1989) (35)
- Macromolecular Design via an Organocatalytic, Monomer-Specific and Temperature-Dependent “On/Off Switch”. High Precision Synthesis of Polyester/Polycarbonate Multiblock Copolymers (2015) (35)
- Solid-phase microextraction (SPME) in polymer characterization—Long-term properties and quality control of polymeric materials (2003) (34)
- Hydrogels from polysaccharides for biomedical applications (2007) (34)
- Chemistry and biochemistry of polymer biodegradation (1994) (33)
- Synthesis and Characterization of Poly(1,5-Dioxepan-2-one-co-L-Lactic Acid) and Poly(1,5-Dioxepan-2-one-co-D,L-Lactic Acid) (1995) (33)
- Rapid deswelling response of poly(N-isopropylacrylamide)/poly(2-alkyl-2-oxazoline)/poly(2-hydroxyethyl methacrylate) hydrogels. (2008) (33)
- Precision synthesis of microstructures in star‐shaped copolymers of ϵ‐caprolactone, L‐lactide, and 1,5‐dioxepan‐2‐one (2008) (33)
- Argon microwave plasma treatment and subsequent hydrosilylation grafting as a way to obtain silicone biomaterials with well-defined surface structures. (2002) (33)
- Influence of Processing Parameters on the Mass Crystallinity of Poly(3‐hydroxybutyrate‐ co‐3‐hydroxyvalerate) (1997) (33)
- Influence of processing parameters on the molecular weight and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (1997) (33)
- Potential tissue implants from the networks based on 1,5-dioxepan-2-one and ε-caprolactone (2005) (32)
- Surface modification of high density polyethylene tubes by coating chitosan, chitosan hydrogel and heparin (2001) (32)
- Stereocomplexation between PLA-like substituted oligomers and the influence on the hydrolytic degradation (2013) (32)
- Reprocessing of fiberglass reinforced polyamide 66: Influence on short term properties (1996) (31)
- Preparation for drilling well IDDP-2 at Reykjanes (2014) (31)
- Switching from Controlled Ring-Opening Polymerization (cROP) to Controlled Ring-Closing Depolymerization (cRCDP) by Adjusting the Reaction Parameters That Determine the Ceiling Temperature (2016) (31)
- Design of Elastomeric Homo- and Copolymer Networks of Functional Aliphatic Polyester for Use in Biomedical Applications (2010) (30)
- Macromolecular design of aliphatic polyesters with maintained mechanical properties and a rapid, customized degradation profile. (2011) (30)
- Degradable high-molecular-weight random copolymers, based on ε-caprolactone and 1,5-dioxepan-2-one, with non-crystallizable units inserted in the crystalline structure (1995) (30)
- Solvent-free vapor-phase photografting of acrylamide onto poly(ethylene terephthalate). (2005) (29)
- Morphology engineering of a novel poly(L-lactide)/poly(1,5-dioxepan-2-one) microsphere system for controlled drug delivery (2000) (29)
- Solvent free vapor phase photografting of maleic anhydride onto poly(ethylene terephthalate) and surface coupling of fluorinated probes, PEG, and an RGD-peptide. (2005) (29)
- Porous scaffolds from high molecular weight polyesters synthesized via enzyme-catalyzed ring-opening polymerization. (2006) (29)
- Polyester hydrogels with swelling properties controlled by the polymer architecture, molecular weight, and crosslinking agent (2003) (29)
- Growth and differentiation of bone marrow stromal cells on biodegradable polymer scaffolds: an in vitro study. (2010) (29)
- Thermal oxidation of poly(ethylene oxide–propylene oxide–ethylene oxide) triblock copolymer: focus on low molecular weight degradation products (2002) (28)
- Synthesis, characterization and degradation of aliphatic polyanhydrides (1990) (28)
- Polymerization of Oxepan-2,7-dione in Solution and Synthesis of Block Copolymers of Oxepan-2,7-dione and 2-Oxepanone (1991) (28)
- Hydrolytic degradation of nonoriented poly(β‐propiolactone) (1991) (28)
- Functional polymers. XXVII: 2[2-hydroxy-4-acryloxy(methacryloxy)phenyl]2H-benzotriazole: Monomers, polymers, and copolymers (1984) (28)
- High‐molecular‐weight poly(1,5‐dioxepan‐2‐one) via enzyme‐catalyzed ring‐opening polymerization (2005) (28)
- Solid-phase extraction and gas chromatographic-mass spectrometric identification of degradation products from enhanced environmentally degradable polyethylene (1995) (28)
- SET‐LRP goes “green”: Various hemicellulose initiating systems under non‐inert conditions (2012) (27)
- Resorbable scaffolds from three different techniques: electrospun fabrics, salt-leaching porous films, and smooth flat surfaces. (2008) (27)
- The influence of processing induced differences in molecular structure on the biological and non-biological degradation of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate), P(3-HB-co-3-HV) (1999) (27)
- Establishing α-bromo-γ-butyrolactone as a platform for synthesis of functional aliphatic polyesters – bridging the gap between ROP and SET-LRP (2014) (27)
- New segmented poly(ester-urethane)s from renewable resources (2001) (27)
- Effect of abiotic factors on the degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in simulated and natural composting environments (1999) (26)
- Bioactive heparin surfaces from derivatization of polyacrylamide-grafted LLDPE. (1996) (26)
- Synthesis of Amorphous Aliphatic Polyester-Ether Homo- and Copolymers by Radical Polymerization of Ketene Acetals (2010) (26)
- Integrin-mediated adhesion of human mesenchymal stem cells to extracellular matrix proteins adsorbed to polymer surfaces (2012) (26)
- The nature of polymer grafts and substrate shape on the surface degradation of poly(l-lactide) (2015) (26)
- Controlled ring-opening polymerization of lactones and lactides (2000) (26)
- Influence of Processing Additives on the Degradation of Melt-Pressed Films of Poly(e-Caprolactone) and Poly(Lactic Acid) (1998) (26)
- Increased biodegradation of a low-density polyethylene (LDPE) matrix in starch-filled LDPE materials (1993) (26)
- Nano-Stereocomplexation of Polylactide (PLA) Spheres by Spray Droplet Atomization (2014) (25)
- Design of renewable poly(amidoamine)/hemicellulose hydrogels for heavy metal adsorption (2014) (25)
- Synthesis and characterization of a new degradable thermoplastic elastomer based on 1,5-dioxepan-2-one and ε-caprolactone (1995) (25)
- Impact of degradation mechanisms on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) during composting (1997) (25)
- Spectroscopic and mechanical changes in irradiated starch-filled LDPE (1994) (24)
- Novel drug delivery microspheres from poly(1,5-dioxepan-2-one-co-L-lactide) (1999) (24)
- Polylactides with “green” plasticizers: Influence of isomer composition (2013) (24)
- Long-Term Properties of Polyolefins (2013) (24)
- Great advantages in using a natural rubber instead of a synthetic SBR in a pro-oxidant system for degradable LDPE. (2000) (24)
- Oxygen microwave plasma treatment of silicone elastomer: Kinetic behavior and surface composition (2004) (24)
- Fingerprinting the degradation product patterns of different polyester‐ether networks by electrospray ionization mass spectrometry (2008) (24)
- New functionalized polyesters to achieve controlled architectures (2004) (23)
- The effect of electron beam irradiation on PCL and PDXO-X monitored by luminescence and electron spin resonance measurements (2000) (23)
- Prehydrolysis in softwood pulping produces a valuable biorefinery fraction for material utilization. (2012) (23)
- Mapping the Characteristics of the Radical Ring-Opening Polymerization of a Cyclic Ketene Acetal Towards the Creation of a Functionalized Polyester (2009) (23)
- Detection by high-performance liquid chromatography of polyamines formed by clostridial putrefaction of caseins. (1988) (23)
- Hydrolytic degradation of melt-extruded fibers from poly(β-propiolactone) (1990) (23)
- Synthesis and in vitro degradation of poly(N‐vinyl‐2‐pyrrolidone)‐based graft copolymers for biomedical applications (2002) (23)
- Recyclable Fully Biobased Chitosan Adsorbents Spray-Dried in One Pot to Microscopic Size and Enhanced Adsorption Capacity. (2019) (22)
- Synthesis of full interpenetrating hemicellulose hydrogel networks. (2017) (22)
- Chromatographic fingerprinting : a tool for classification and for predicting the degradation state of degradable polyethylene (2005) (21)
- Star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one): Synthesis and characterization (2002) (21)
- Synthesis, Chemistry and Properties of Hemicelluloses (2011) (21)
- Chemical Modifications of Hemicelluloses and Gums (2004) (21)
- Recycling of mixed plastic fractions: mechanical properties of multicomponent extruded polyolefin blends using response surface methodology (1998) (21)
- Long-term properties and migration of low molecular mass compounds from modified PLLA materials during accelerated ageing (2012) (21)
- MALDI-TOF MS reveals the molecular level structures of different hydrophilic-hydrophobic polyether-esters. (2009) (21)
- Total luminescence intensity as a tool to classify degradable polyethylene films by early degradation detection and changes in activation energy. (2003) (21)
- Polymerization and Degradation of 1,5-Dioxepan-2-One (1993) (21)
- Polyesters with small structural variations improve the mechanical properties of polylactide (2013) (21)
- Graft polymerization of acrylamide onto linear low-density polyethylene film by electron beam pre-irradiation in air or argon: 3. Morphology (1996) (21)
- Adapting wood hydrolysate barriers to high humidity conditions. (2014) (21)
- Graft polymerization of arcylamide onto LLDPE film by electron beam pre‐irradiation in air or argon. I. Influence of dose, grafting temperature, and monomer concentration (1995) (21)
- Response of Bone and Periodontal Ligament Cells to Biodegradable Polymer Scaffolds In Vitro (2010) (20)
- Covalent VEGF protein immobilization on resorbable polymeric surfaces (2011) (20)
- Gas chromatographic detection of volatile amines found in indoor air due to putrefactive degradation of casein-containing building materials (1989) (20)
- Short methylene segment crosslinks in degradable aliphatic polyanhydride: Network formation, characterization, and degradation (1996) (19)
- Nondestructive covalent "grafting-from" of poly(lactide) particles of different geometries. (2012) (19)
- Development of a solid-phase extraction method for simultaneous extraction of adipic acid, succinic acid and 1,4-butanediol formed during hydrolysis of poly(butylene adipate) and poly(butylene succinate). (2004) (19)
- Surfactant as a critical factor when tuning the hydrophilicity in three-dimensional polyester-based scaffolds: impact of hydrophilicity on their mechanical properties and the cellular response of human osteoblast-like cells. (2014) (19)
- Changes in chemical and thermal properties of the tri-block copolymer poly(L-lactide-b-1,5-dioxepan-2-one-b-L-lactide) during hydrolytic degradation (2000) (19)
- Synthesis of Poly(Adipic Anhydride) by Use of Ketene (1988) (19)
- Recycling Oxidized Model Polyethylene Powder as a Degradation Enhancing Filler for Polyethylene/Polycaprolactone Blends (2016) (19)
- Fibrillar structure of resorbable microblock copolymers based on 1,5‐dioxepan‐2‐one and ε‐caprolactone (2003) (19)
- Design and Syntesis of Different Types of Poly(Lactic acid) (2010) (19)
- Process efficiency and long‐term performance of α‐tocopherol in film‐blown linear low‐density polyethylene (2005) (19)
- Selective degradation in aliphatic block copolyesters by controlling the heterogeneity of the amorphous phase (2015) (18)
- Influence of impurities on mechanical properties of recycled glass fiber reinforced polyamide 66 (1998) (18)
- Unrefined wood hydrolysates are viable reactants for the reproducible synthesis of highly swellable hydrogels. (2014) (18)
- Use of germanium initiators in ring‐opening polymerization of L‐lactide (2003) (18)
- Surface functionalization of porous resorbable scaffolds by covalent grafting. (2008) (18)
- Chemo-enzymatic synthesis of comb polymers (2007) (18)
- Environment-adaptable polymers (1993) (18)
- Reinforced Degradable Biocomposite by Homogenously Distributed Functionalized Nanodiamond Particles (2015) (18)
- Multi‐layer modeling of diffusion of water in acrylamide‐grafted aliphatic polyesters (1998) (18)
- Comparison between physical blending and copolymerization of poly(trimethylene carbonate) and poly(adipic anhydride) with special regard to compatibility, morphology and degradation (1997) (17)
- Green Semi-IPN Hydrogels by Direct Utilization of Crude Wood Hydrolysates (2016) (17)
- Exploring the Biodegradation Potential of Polyethylene Through a Simple Chemical Test Method (2014) (17)
- Bio‐safe synthesis of linear and branched PLLA (2010) (17)
- Gas chromatographic, liquid chromatographic and gas chromatographic-mass spectrometric identification of degradation products in accelerated aged microbial polyhydroxyalkanoates (1994) (17)
- Solvent free vapour phase photografting of acrylamide onto poly(methyl methacrylate) (2005) (16)
- Microblock copolymers as a result of transesterification catalyzing behavior of lipase CA in sequential ROP (2007) (16)
- Graft polymerisation of acrylamide onto PCL film by electron beam pre-irradiation in air or argon. Morphology in the final grafted state (2000) (16)
- Improvement of α‐tocopherols long‐term efficiency by modeling its heterogeneous natural environment in polyethylene (2006) (16)
- Random copolymers of 1,5-dioxepan-2-one (1998) (16)
- Indicator products: a new tool for lifetime prediction of polymeric materials. (2005) (16)
- Silicone elastomer surface functionalized with primary amines and subsequently coupled with heparin. (2003) (16)
- Enhanced formability and mechanical performance of wood hydrolysate films through reductive amination chain extension. (2015) (16)
- Emission of Volatiles from Polymers — A New Approach for Understanding Polymer Degradation (2006) (16)
- Melt Polymerization of Adipic Anhydride (Oxepane-2,7-Dione) (1990) (15)
- THE USE OF POLYMER DESIGN IN RESORBABLE COLLOIDS (2006) (15)
- Synthetic Polymers as Drugs a (1985) (15)
- Enhanced rigidity of recycled polypropylene from packaging waste by compounding with talc and high‐ crystallinity polypropylene (2001) (15)
- Copolymers of 1.5‐dioxepan‐2‐one and L‐ or D,L‐dilactide ‐ synthesis and characterization (1992) (15)
- Tuning loading and release by modification of micelle core crystallinity and preparation (2015) (15)
- Macromolecular Architecture-Nature as a Model for Degradable Polymers (1996) (15)
- Synthesis and characterization of high molecular weight poly(1,5-dioxepan-2-one) with narrow molecular weight distribution (1995) (15)
- Versatile and controlled synthesis of resorbable star-shaped polymers using a spirocyclic tin initiator : Reaction optimization and kinetics (2006) (15)
- New Biodegradable Polymers from Renewable Sources – Segmented Copolyesters of Poly(1,3-Propanediol Succinate) and Poly(Ethylene Glycol) (2002) (14)
- Cationic polymerization of 1,5-dioxepan-2-one with Lewis acids in bulk and solution (1996) (14)
- Assessing the degradation profile of functional aliphatic polyesters with precise control of the degradation products. (2012) (14)
- Well-organized phase-separated nanostructured surfaces of hydrophilic/hydrophobic ABA triblock copolymers. (2003) (14)
- α-Methacryloyl-ω-Hydroxyl-Poly(ϵ-Caprolactone) Macromonomer: Synthesis, Characterization, and Copolymerization (1998) (14)
- Copolymers of 1,5-dioxepan-2-one and L- or D,L-dilactide: in vivo degradation behaviour. (1994) (14)
- Phenolic prepreg waste as functional filler with antioxidant effect in polypropylene and polyamide-6 (2006) (14)
- Barrier and mechanical properties of pulp fiber/polymer laminates and blends (2000) (14)
- The grafting of acrylamide onto poly(?-caprolactone) and poly(1,5-dioxepan-2-one) using electron beam preirradiation. I. Influence of dose and Mohr's salt for the grafting onto poly(?-caprolactone) (1999) (14)
- Innovative approaches for converting a wood hydrolysate to high-quality barrier coatings. (2013) (13)
- Degradable polyethylene‐starch complex (1991) (13)
- Graft polymerization of acrylamide onto LLDPE film by electron beam pre‐irradiation in air and argon. II. Influence of mohr's salt (1995) (13)
- Disaggregation and Anionic Activation of Nanodiamonds Mediated by Sodium Hydride—A New Route to Functional Aliphatic Polyester‐Based Nanodiamond Materials (2015) (13)
- Induced redox responsiveness and electroactivity for altering the properties of micelles without external stimuli† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c4sm00258j Click here for additional data file. (2014) (13)
- Synthetic pathways enables the design of functionalized poly(lactic acid) with pendant mercapto groups (2012) (13)
- Macroinitiator Halide Effects in Galactoglucomannan-Mediated Single Electron Transfer-Living Radical Polymerization (2011) (13)
- Durability of in-plant recycled glass fiber reinforced polyamide 66 (1998) (13)
- New ester and lactone end‐functionalized N‐vinyl‐2‐pyrrolidinone oligomers (2000) (13)
- Migration and Emission of Plasticizer and Its Degradation Products during Thermal Aging of Nitrile Rubber (2003) (13)
- Controlled copolymerization of the functional 5-membered lactone monomer, α-bromo-γ-butyrolactone, via selective organocatalysis (2016) (13)
- Durability study of recycled glass‐fiber‐reinforced polyamide 66 in a service‐related environment (1997) (12)
- New hemicellulose-based hydrogels (2004) (12)
- The grafting of acrylamide onto poly(ε‐caprolactone) and poly(1,5‐dioxepan‐2‐one) using electron beam preirradiation. II. An in vitro degradation study on grafted poly(ε‐caprolactone) (1999) (12)
- Functional polymers (1984) (12)
- Enzyme-catalyzed copolymerization of oxiranes with dicarboxylic acid anhydrides (2005) (12)
- Chromatographic Analysis of Antioxidants in Polymeric Materials and Their Migration from Plastics into Solution (2008) (12)
- BIRCH XYLAN GRAFTED WITH PLA BRANCHES OF PREDICTABLE LENGTH (2012) (12)
- Force interactions of nonagglomerating polylactide particles obtained through covalent surface grafting with hydrophilic polymers. (2013) (12)
- Abiotic and biotic degradation of aliphatic polyesters from “petro” versus “green” resources (1998) (12)
- Correlation between molar mass changes and CO2 evolution from biodegraded 14C-labeled ethylene-vinyl alcohol copolymer and ethylene polymers (1998) (12)
- Upgrading of wood pre-hydrolysis liquor for renewable barrier design: a techno-economic consideration (2014) (11)
- Functional and highly porous scaffolds for biomedical applications. (2011) (11)
- Chromatography for Sustainable Polymeric Materials (2008) (11)
- Polyesters from Large Lactones (2009) (11)
- Compatibilizers of a purposely designed graft copolymer for hydrolysate/PLLA blends (2011) (11)
- Bulk polymerization of p-dioxanone using a cyclic tin alkoxide as initiator (2007) (11)
- Positron lifetime reveals the nano level packing in complex polysaccharide-rich hydrolysate matrixes. (2012) (11)
- Odour perception – A rapid and easy method to detect early degradation of polymers (2012) (11)
- Degradable polymers. III: Synthesis and characterization of aliphatic thermoplastic block copolyesters (1987) (11)
- Synthesis of core‐shell structured carboxylated microparticles with a straightforward procedure and their evaluation as a polymer support (2005) (10)
- Polymer–water partition coefficients of extended range measured by using organic modifiers in the aqueous phase (2007) (10)
- Barriers from wood hydrolysate/quaternized cellulose polyelectrolyte complexes (2015) (10)
- The grafting of acrylamide onto poly(?-caprolactone) and poly(1,5-dioxepan-2-one) using electron beam preirradiation. III. The grafting andin vitro degradation of chemically crosslinked poly(1,5-dioxepan-2-one) (1999) (10)
- Evaluation of long‐term performance of antioxidants using prooxidants instead of thermal acceleration (2005) (10)
- Quantitative determination of volatiles in polymers and quality control of recycled materials by static headspace techniques (2007) (10)
- Degradable Polymers. IV. Degradation of Aliphatic Thermoplastic Block Copolyesters (1988) (10)
- Forecasting linear aliphatic copolyester degradation through modular block design (2016) (10)
- Suitable Materials for Soft Tissue Reconstruction: In Vitro Studies of Cell – Triblock Copolymer Interactions (2005) (10)
- Silicone elastomers with controlled surface composition using argon or hydrogen plasma treatment (2003) (10)
- RING-OPENING-CLOSING ALTERNATING COPOLYMERIZATION OF A CYCLIC PHOSPHONITE WITH A DIALDEHYDE (1991) (9)
- Chemiluminescence is a rapid and sensitive method to assess phosphatidylcholine oxidation (1996) (9)
- Polyethylene degradation and degradation products (1990) (9)
- A controlled radical polymerization route to polyepoxidated grafted hemicellulose materials (2014) (9)
- Improvements in the Properties of Mechanically Recycled Thermoplastics (1998) (9)
- Spontaneous Crosslinking of Poly(1,5-dioxepan-2-one) Originating from Ether Bond Fragmentation (2008) (9)
- The biodegradation of a biopolymeric additive in building materials (1990) (9)
- Polyhydroxyalkanoates and Other Biopolymers. (2019) (9)
- Retrostructural model to predict biomass formulations for barrier performance. (2012) (9)
- COLD-TOLERANT (PSYCHROTROPHIC) MOULDS AND BLUE STAIN FUNGI FROM SOFTWOOD IN SWEDEN. GROWTH RATES IN RELATION TO PH AND TEMPERATURE (1987) (9)
- Synthesis of degradable copolymers by ring-opening polymerization (1993) (8)
- Molecular weight determination in degraded oxidizable and hydrolyzable polymers giving deviation from accurate using calibration and the Mark-Houwink-Sakaruda (MHS) equation (1997) (8)
- Controlled degradation by artificial and biological processes (1996) (8)
- Highlighting the Importance of Surface Grafting in Combination with a Layer-by-Layer Approach for Fabricating Advanced 3D Poly(l-lactide) Microsphere Scaffolds (2016) (8)
- The influence of processing conditions on the properties and the degradation of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (1998) (8)
- Techniques and mechanisms of polymer degradation (2002) (8)
- Chromatography for sustainable polymeric materials : renewable, degradable and recyclable (2008) (8)
- Crosslinked PVAL nanofibers with enhanced long‐term stability prepared by single‐step electrospinning (2013) (7)
- Liquid Chromatography / FTIR Microspectroscopy / Microwave Assisted Synthesis (2003) (7)
- Tailored mechanical properties and degradability of polyesters by controlled molecular architecture (2001) (7)
- A facile method for the study of slow physical and chemical processes in polymeric systems (1989) (6)
- Toward “Green” Hybrid Materials: Core–Shell Particles with Enhanced Impact Energy Absorbing Ability (2016) (6)
- 13 – Biodegradable Polymers (1989) (6)
- Degradation Products in Degradable Polymers (1995) (6)
- Ring-opening polymerization of degradable polyesters (1998) (6)
- Total Luminescence Intensity (TLI) Offers Superior Early Oxidation Detection in Unstabilised Polyethylene but is no better than FT-IR for Stabilised Polyolefins (2006) (6)
- Polymers at the Interface with Biology. (2018) (6)
- Biodegradation of Polyethylene Followed by Assimilation of Degradation Products (2002) (5)
- Future of Biomacromolecules at a Crossroads of Polymer Science and Biology. (2020) (5)
- Controlled destruction of residual crosslinker in a silicone elastomer for drug delivery (2002) (5)
- Adhesion of microwave-plasma-treated fluoropolymers to thermoset vinylester (2005) (5)
- Modification of birch xylan by lactide-grafting (2012) (5)
- Modified galactoglucomannans from forestry waste-water for films and hydrogels (2009) (5)
- Functional Polymers. XXI. Activity of Low Molecular Weight and Polymeric Salicylic Acid Derivatives (1984) (5)
- Recycling of Glass Fibre Reinforced Phenolic Prepreg Waste Part 1. Recovery and Reuse of Glass Fibres in PP and PA6 (2004) (4)
- Global gene expression profile of osteoblast-like cells grown on polyester copolymer scaffolds. (2011) (4)
- Evaluation of surface modification processes using a ternary XPS diagram (2002) (4)
- Biodegradation and testmethods for environmental and biomedical applications of polymers (1990) (4)
- Indicator Products and Chromatographic Fingerprinting: New Tools for Degradation State and Lifetime Estimation (2007) (4)
- Changes in Composition of Hydrolyzed Poly(butylene adipate-co-caproamide) Characterized by Pyrolysis-GC-MS, 1H-NMR and FTIR (2000) (4)
- New tools for analysing degradation (1995) (3)
- Chromatographic fingerprinting as a means to predict degradation mechanisms (1996) (3)
- Main‐chain functionalization of poly(L‐lactide) with pendant unsaturations (2012) (3)
- Simultaneous Polymerization and Polypeptide Particle Production via Reactive Spray-Drying (2016) (3)
- TUNED MECHANICAL PROPERTIES ACHIEVED BY VARYING POLYMER STRUCTURE KNOWLEDGE THAT GENERATES NEW MATERIALS FOR TISSUE ENGINEERING (2007) (3)
- Governmental Policy, Regulations and Standards (1994) (3)
- Build‐up of carboxylic acids in polyethylene and their relation to off‐flavor and carbonyl index (2007) (3)
- New selective method for quantification of organosilanol groups in silicone pre-elastomers. (2002) (3)
- Nano patterned covalent surface modification of poly(e-caprolactone) (2005) (3)
- Frontiers in biomacromolecules: functional materials from nature. (2012) (3)
- Increased biodegradation of LDPE-matrix in starch-filled LDPE materials (1992) (3)
- Microsphere valorization of forestry derived hydrolysates (2012) (3)
- Design of New Building Blocks in Resorbable Polymers: Application in Drug Delivery Microspheres (1994) (3)
- INSTITUTSDAGEN at the Royal Institute of Technology, Stockholm, Sweden, May 3, 2000 (2001) (3)
- Identification and characterization of alkali-tolerant clostridia isolated from biodeteriorated casein-containing building materials (1988) (3)
- Synthesis of biodegradable elastomers based on 1,5-dioxepan-2-one (1994) (2)
- Biodegradable polymers/plastics (1992) (2)
- Synthesis and Degradation Rheology and Extrusion (1982) (2)
- Dynamics in prediction of life-time of environmental adaptable polymers (1999) (2)
- Recycling of Glass-fibre Reinforced Phenolic Prepreg Waste. Part 2. Milled Prepreg as Functional Filler in PP and PA6 (2004) (2)
- Polymerizable, polymeric, and polymer-bound (ultraviolet) stabilizers (1985) (2)
- A new method for the determination of a hydrosilanization inhibitor applied to measurements during curing of a silicone elastomer (2001) (2)
- Macromolecular symposia; degradability, Renewability and Recycling - key functions for future materials (1999) (2)
- Barrier layers for packaging laminates and packaging laminates comprising such barrier layers (2009) (2)
- Celebrating 20 years of Biomacromolecules! (2019) (2)
- Chromatographic Analysis and Total Luminescence Intensity as Tools for Early Degradation Detection and Degradation State Estimation (2006) (1)
- Rational Design of Multifunctional Renewable-Resourced Materials. (2019) (1)
- Durability of automotive radiator end-caps: effects of service and recyclate (1998) (1)
- Characterization of recycled glass fiber reinforced polyamide 6.6 (1994) (1)
- EPDM Elastomers as Impact Modifiers for Contaminated, Recycled HDPE (1997) (1)
- Utilization of hemicelluloses from forestry residual streams as barrier film and hydrogel materials. (2005) (1)
- Special Section on Polymer Biomaterials (2005) (1)
- Degradable polymers: design, synthesis and testing (2003) (1)
- Functional Polymers. XXVII**" 2(2-Hydroxy-4-aeryloxy(methaeryloxy)phenyl)2H-benzo- triazole: Monomers, Polymers, and Copolymers*** (1984) (1)
- Amorphous and degradable polymers aimed for tissue engineering synthesized by radical ring-opening polymerization (2012) (1)
- Recycling of cheap packaging waste versus expensive engineering materials (1998) (1)
- New matrices for controlled drug delivery. (2000) (1)
- Novel release systems from biodegradable polymers (1998) (1)
- Special Section on Biological Polyesters (2005) (1)
- Design of green materials by building-in a controlled behavior (2014) (0)
- Matrices effects as correlated with formation of degradation products in polyethylene (1998) (0)
- Wood hydrolysate based coating in multilayered barriers : a pilot scale approach (2014) (0)
- POLY 555-Polymer architectures and the relation to their material properties (2006) (0)
- Wood hydrolysates turned valuable (2012) (0)
- Galactoglucomannan derivates for renewable hydrogels design (2010) (0)
- Functional degradable polymers - simplified (2014) (0)
- Wood hydrolysates : From fractions to products (2015) (0)
- Degradable polymers and their interaction with the environment (2007) (0)
- Hemicellulose-rich materials derived from wood pre-hydrolysis (2014) (0)
- Biodegradable Polymers: Biomedically Degradable Polymers (2017) (0)
- Increased biocompatibility by surface modification (2004) (0)
- Integration of knowledge in both polymer and biological sciences. (2000) (0)
- Invited and contributing lectures presented at the International Symposium on Molecular Architecture for Degradable Polymers, Molecular Design of Polymeric Materials of Tomorrow, held in Stockholm, Sweden, June 10-13, 1997 (1998) (0)
- Polymers: Syntheses/Reactivities/Properties (1979) (0)
- Force interactions of grafted polylactide particles (2014) (0)
- Assessment of Carboxylic Acids from Water-Aged and Air-Aged Polyethylene by Head-Space Solid-Phase Microextraction (HS-SPME) and their correlation to Off-Flavours and Carbonyl Index (2006) (0)
- Turnwood : barrier materials for packaging from wood hydrolysate (2014) (0)
- PMSE 295-Silane functionalization of MWNTs improves the mechanical properties of MWNT/epoxy nanocomposites (2006) (0)
- New approaches to the design of hybrid materials from hemicelluloses-rich resources (2011) (0)
- CELL 104-Renewable and/or degradable polymers (2007) (0)
- CELL 92-Modified galactoglucomannan from forestry wastewater utilized for oxygen barrier films and hydrogels (2007) (0)
- Tailoring the hydrolytic endurance of Poly(L-lactide)-based products (2014) (0)
- Green living radical polymerization from hemicellulose-based macroinitiators (2012) (0)
- Correction to “Switching from Controlled Ring-Opening Polymerization (cROP) to Controlled Ring-Closing Depolymerization (cRCDP) by Adjusting the Reaction Parameters That Determine the Ceiling Temperature” (2018) (0)
- Preface for the International Symposium on Macromolecular Archtiecture (1996) (0)
- Redox responsiveness and electroactivity for preparation of smart micelles (2014) (0)
- Hydrogels based upon hemicelluloses from industrial forestry waste for utilization in advanced seed coating technology. (2005) (0)
- Synthesis of resorbable networks based on homo- and copolymers of poly(1,5-dioxepan-2-one) and poly(L-lactide). (2004) (0)
- PMSE 484-Mixed brushes as selective self-adoptive patterns that enhance polymer adsorption (2006) (0)
- Tuned electrical conductivity by macromolecular architecture : Electroactive and degradable block copolymers based on polyesters and aniline oligomers (2012) (0)
- Benght Rånby Honored (1996) (0)
- Take advantage of what Nature creates and utilize biomass (2017) (0)
- Turning Spruce Wood into Renewable Oxygen Barriers (2012) (0)
- Recent Developments in the Area of Biological Polyesters: ISBP 2008 (2009) (0)
- 5th International Scientific Workshop on Biodegradable Plastics and Polymers : degradability, renewability and recycling - key functions for future materials, held in Stockholm, Sweden, June 9-13, 1998 (1999) (0)
- Polymer Recycling and Degradation (2005) (0)
- Special Section on Chitin (2005) (0)
- SURFACE MODIFICATION OF DEGRADABLE POLYMERS (2005) (0)
- Improving PLA-based material properties (2012) (0)
- Unusual Properties of New Polymers (1983) (0)
- Macromolecular design controls the degradation product pattern and mechanical properties of polyesters (2012) (0)
- Wood hydrolysates : The new bioresource packaging material (2013) (0)
- Hydrogels from wood hydrolysates (2011) (0)
- Enhanced Osteoconductivity of Degradable co-Polyester Scaffolds through Covalent Immobilization of BMP-2 (2011) (0)
- Designing nonagglomerating polylactide particles with various interaction forces by covalent photografting (2014) (0)
- Recycling of automotive radiator end-caps (1995) (0)
- Adhesion, proliferation and differentiation of bone marrow stromal cells in hydrophilic, Tween 80 modified polyester scaffolds (2012) (0)
- Controlled synthesis of star-shaped homo- and co-polymers of aliphatic polyesters (2006) (0)
- Professor Bengt Ránby (5 April 1920-10 October 2000) (2001) (0)
- Micro- and macromolecular design of aliphatic polyesters (2015) (0)
- From design and synthesis to advanced properties and sustainable polymeric materials (2017) (0)
- Chromatographic analysis as a tool for predicting material performance (2005) (0)
- PLA stereocomplexation governs the hydrolytic degradation process (2012) (0)
- POLY 585-Covalent surface modification of degradable polymers (2007) (0)
- Efficient conversion of wood hydrolysates into renewable materials (2012) (0)
- Second U.S.-Sweden Workshop on Photochemistry of Polymers (1986) (0)
- Alkenyl derivates of galactoglucomannan for renewable hydrogels design (2009) (0)
- Royal Institute of Technology: Department of Polymer Technology (1992) (0)
- Mechanisms of Polyreactions ― Polymer Characterization (1976) (0)
- Long-term properties and ageing of polymers: fate of additives in landfills: literature report (1996) (0)
- Environmental interaction of polymers. Natural metabolites as opposed to the degradation products of synthetic polymers (1997) (0)
This paper list is powered by the following services:
Other Resources About Ann-Christine Albertsson
What Schools Are Affiliated With Ann-Christine Albertsson?
Ann-Christine Albertsson is affiliated with the following schools: