Ali Erdemir | Academic Influence

Why Is Ali Erdemir Influential?

(Suggest an Edit or Addition)

According to Wikipedia, Ali Erdemir, born on July 2, 1954 in Kadirli, Adana, Turkey, is a Turkish American materials scientist specializing in surface engineering and tribology. Education and Career Erdemir graduated from the Metallurgy Department of the Istanbul Technical University in 1977. After working for two years at the İskenderun Iron and Steel Company in Turkey as an engineer, he went to the USA for doctoral studies. Erdemir received a master's degree in materials engineering and a doctorate in materials science and engineering from the Georgia Institute of Technology in 1982 and 1986, respectively. After completing his military service in Turkey, Erdemir began in 1987 to work as an assistant metallurgist at the Argonne National Laboratory near Chicago, which is operated by the University of Chicago for the U.S. Department of Energy. In 2020, he relocated to Texas, where he is currently holds an appointment as an Eminent Professor in the Department of Mechanical Engineering at Texas A&M University in College Station, Texas.

(See a Problem?)

Ali Erdemir's Published Works

Number of citations in a given year to any of this author's works

Total number of citations to an author for the works they published in a given year. This highlights publication of the most important work(s) by the author

Published Papers

Global energy consumption due to friction in passenger cars (2012) (1118)
Graphene: a new emerging lubricant ☆ (2014) (967)
Tribology of diamond-like carbon films: recent progress and future prospects (2006) (943)
Influence of tribology on global energy consumption, costs and emissions (2017) (765)
Few layer graphene to reduce wear and friction on sliding steel surfaces (2013) (558)
Macroscale superlubricity enabled by graphene nanoscroll formation (2015) (535)
The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. (2005) (523)
A study of the wear mechanism of diamond-like carbon films (1996) (505)
Historical developments and new trends in tribological and solid lubricant coatings. (2004) (474)
The role of hydrogen in tribological properties of diamond-like carbon films☆ (2001) (468)
Review of engineered tribological interfaces for improved boundary lubrication (2005) (468)
Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen (2013) (381)
Tribology of diamond-like carbon films (2008) (347)
Ultrananocrystalline diamond thin films for MEMS and moving mechanical assembly devices (2001) (337)
Tribology of diamond-like carbon films : fundamentals and applications (2008) (315)
Global energy consumption due to friction in trucks and buses (2014) (314)
Synthesis of diamondlike carbon films with superlow friction and wear properties (2000) (296)
An investigation of the relationship between graphitization and frictional behavior of DLC coatings (1996) (287)
Solid Lubricant Coatings: Recent Developments and Future Trends (2004) (276)
A crystal-chemical approach to lubrication by solid oxides (2000) (267)
Carbon-based tribofilms from lubricating oils (2016) (262)
Approaches for Achieving Superlubricity in Two-Dimensional Materials. (2018) (258)
Friction of diamond-like carbon films in different atmospheres (2003) (258)
Genesis of superlow friction and wear in diamondlike carbon films (2004) (255)
Superlow friction behavior of diamond-like carbon coatings: Time and speed effects (2001) (233)
Extraordinary Macroscale Wear Resistance of One Atom Thick Graphene Layer (2014) (221)
Friction-induced structural transformations of diamondlike carbon coatings under various atmospheres (2003) (219)
Global energy consumption due to friction and wear in the mining industry (2017) (218)
Effect of medications for root canal treatment on bonding to root canal dentin. (2004) (210)
Friction and wear behavior of laser textured surface under lubricated initial point contact (2011) (207)
The Effect of Laser Texturing of Steel Surfaces and Speed-Load Parameters on the Transition of Lubrication Regime from Boundary to Hydrodynamic (2004) (200)
Evaluation of the effect of endodontic irrigation solutions on the microhardness and the roughness of root canal dentin. (2004) (187)
The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars (2019) (185)
Frictional behavior of diamondlike carbon films in vacuum and under varying water vapor pressure (2002) (176)
A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings (2005) (174)
Tribology of two-dimensional materials: From mechanisms to modulating strategies (2019) (168)
Synthesis of superlow-friction carbon films from highly hydrogenated methane plasmas☆ (2000) (161)
Tribological properties of nanocrystalline diamond films (1999) (159)
Influence of environmental parameters on the frictional behavior of DLC coatings (1997) (152)
Material Wear and Fatigue in Wind Turbine Systems (2013) (151)
A tribological investigation of the graphite-to-diamond-like behavior of amorphous carbon films ion beam deposited on ceramic substrates☆ (1991) (150)
Comparative tribological behaviors of TiN, CrN and MoNCu nanocomposite coatings (2008) (148)
Operando tribochemical formation of onion-like-carbon leads to macroscale superlubricity (2018) (140)
Tribological characteristics of DLC films and duplex plasma nitriding/DLC coating treatments (1995) (139)
Environmental effects on the friction of hydrogenated DLC films (2006) (137)
Characterization of transfer layers on steel surfaces sliding against diamond-like hydrocarbon films in dry nitrogen (1995) (121)
Effect of source gas chemistry on tribological performance of diamond-like carbon films. (1999) (120)
Shear bond strength of three resin based sealers to dentin with and without the smear layer. (2005) (117)
Formation of ultralow friction surface films on boron carbide (1996) (117)
Achieving superlubricity in DLC films by controlling bulk, surface, and tribochemistry (2014) (115)
The effect of fibre insertion on fracture resistance of root filled molar teeth with MOD preparations restored with composite. (2005) (112)
Effects of endodontic irrigation solutions on mineral content of root canal dentin using ICP-AES technique. (2005) (107)
Tribology of naturally occurring boric acid films on boron carbide (1996) (106)
Characterization of transfer layers forming on surfaces sliding against diamond-like carbon☆ (1996) (103)
Effect of EDTA and citric acid solutions on the microhardness and the roughness of human root canal dentin. (2005) (102)
Reinforcement effect of polyethylene fibre in root-filled teeth: comparison of two restoration techniques. (2006) (98)
Preparation of ultralow-friction surface films on vanadium diboride. (1996) (96)
Solid Lubricants and Self-Lubricating Films (2001) (94)
Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications (2011) (92)
A study of the formation and self-lubrication mechanisms of boric acid films on boric oxide coatings (1990) (91)
Friction and wear performance of ion-beam-deposited diamond-like carbon films on steel substrates (1994) (90)
Tribology of Diamond, Diamond-like Carbon and Related Films (2000) (89)
Nanoscale friction properties of graphene and graphene oxide (2015) (88)
Physical and tribological properties of diamond films grown in argon-carbon plasmas (1995) (83)
Design criteria for superlubricity in carbon films and related microstructures (2004) (81)
Mechanical and tribological properties of CrAlN-Ag self-lubricating films (2007) (77)
Ultrananocrystalline Diamond Film as a Wear-Resistant and Protective Coating for Mechanical Seal Applications (2005) (76)
Tribological Performance of Diamond and Diamondlike Carbon Films at Elevated Temperatures (1995) (74)
Fundamental understanding of the tribological and thermal behavior of Ag–MoS2 nanoparticle-based multi-component lubricating system (2012) (74)
Understanding run-in behavior of diamond-like carbon friction and preventing diamond-like carbon wear in humid air. (2011) (74)
Graphene - MoS2 ensembles to reduce friction and wear in DLC-Steel contacts (2019) (73)
Friction and wear performance of diamond-like carbon films grown in various source gas plasmas (1999) (72)
Fundamentals of the Tribology of DLC Coatings (2008) (71)
In situ TEM studies of tribo-induced bonding modifications in near-frictionless carbon films (2010) (71)
Tribological properties of boric acid and boric-acid-forming surfaces. I, Crystal chemistry and mechanism of self-lubrication of boric acid. Discussion. Author's reply (1991) (70)
The Tribological Properties of Low-friction Hydrogenated Diamond-like Carbon Measured in Ultrahigh Vacuum (2005) (70)
Kinetics of electrochemical boriding of low carbon steel (2011) (70)
Graphene as a protective coating and superior lubricant for electrical contacts (2014) (69)
Effect of different cavity disinfectants on shear bond strength of composite resin to dentin. (2009) (68)
Global impact of friction on energy consumption, economy and environment (2015) (68)
Friction and wear properties of smooth diamond films grown in fullerene + argon plasmas☆ (1995) (66)
Tribological Properties of Nanodiamond-Epoxy Composites (2012) (66)
A study of the corrosion behavior of TiN films (1985) (66)
Electrochemical boriding of titanium for improved mechanical properties (2010) (66)
Effect of source gas and deposition method on friction and wear performance of diamondlike carbon films (1997) (65)
The growth of single Fe2B phase on low carbon steel via phase homogenization in electrochemical boriding (PHEB) (2011) (65)
Friction and Wear Mechanisms of Smooth Diamond Films During Sliding in Air and Dry Nitrogen (1997) (64)
Ultralow friction behavior of borided steel surfaces after flash annealing (1996) (63)
Tribological performance of some alternative bearing materials for artificial joints (2003) (62)
Relationship of hertzian contact pressure to friction behavior of self-lubricating boric acid films (1991) (62)
Superior wear resistance of diamond and DLC coatings (2018) (60)
Phase Transformations in Silicon Under Dry and Lubricated Sliding (2002) (60)
Rolling-contact fatigue and wear resistance of hard coatings on bearing-steel substrates (1992) (58)
Tribological properties of boric acid and boric-acid-forming surfaces. II, Mechanisms of formation and self-lubrication of boric acid films on boron- and boric oxide-containing surfaces. Discussion (1991) (57)
Friction and wear of diamond and diamond-like carbon films (2002) (57)
Superlubricity: Friction’s vanishing act (2018) (57)
TOF-SIMS and XPS characterization of diamond-like carbon films after tests in inert and oxidizing environments (2008) (57)
Durability and tribological performance of smooth diamond films produced by Ar-C60 microwave plasmas and by laser polishing (1997) (56)
Tribological analysis of TiN and DLC coated contacts by 3D FEM modelling and stress simulation (2008) (56)
Evaluation of electrochemical boriding of Inconel 600 (2013) (56)
On the hydrogen lubrication mechanism(s) of DLC films: An imaging TOF-SIMS study (2008) (55)
Effects of different curing units and luting agents on push-out bond strength of translucent posts. (2010) (53)
Effect of microstructure and thickness on the friction and wear behavior of CrN coatings (2013) (53)
Self-replenishing solid lubricant films on boron carbide (1999) (52)
Thermotropic polyesters: Synthesis, structure and thermal transitions of poly(p-oxybenzoate-co-p-phenylene isophthalate) (1986) (52)
Relation of Certain Quantum Chemical Parameters to Lubrication Behavior of Solid Oxides (2005) (51)
Effect of tribochemistry on lubricity of DLC films in hydrogen (2014) (50)
The effects of beam energy and substrate temperature on the tribological properties of hard-carbon films on aluminum (1992) (50)
Effect of Humidity on the Tribological Properties of Carbide-Derived Carbon (CDC) Films on Silicon Carbide (2003) (49)
Effects of high-temperature hydrogenation treatment on sliding friction and wear behavior of carbide-derived carbon films. (2004) (49)
Evaluation of pH and calcium ion release of Acroseal sealer in comparison with Apexit and Sealapex sealers. (2007) (48)
Assessment of antibacterial activity of EndoREZ. (2006) (48)
Accuracy of two electronic apex locators in primary teeth with and without apical resorption: a laboratory study. (2008) (48)
Transfer of 319 Al alloy to titanium diboride and titanium nitride based (TiAlN, TiCN, TiN) coatings: effects of sliding speed, temperature and environment (2005) (47)
Surface structure of hydrogenated diamond-like carbon: origin of run-in behavior prior to superlubricious interfacial shear. (2015) (47)
Effect of solvents on bonding to root canal dentin. (2004) (47)
Structural order in near-frictionless hydrogenated diamondlike carbon films probed at three length scales via transmission electron microscopy (2007) (46)
Surface analytical investigation of nearly-frictionless carbon films after tests in dry and humid nitrogen (2007) (46)
Comparison of different irrigation activation techniques on smear layer removal: An in vitro study (2015) (44)
Solid/liquid lubrication of ceramics at elevated temperatures (1997) (44)
On the possible role of triboplasma in friction and wear of diamond-like carbon films in hydrogen-containing environments (2009) (43)
Tribological Properties of Carbon Coatings Produced by High Temperature Chlorination of Silicon Carbide (2000) (42)
Tribological Properties of Hard Carbon Films on Zirconia Ceramics (1995) (41)
Operando formation of an ultra-low friction boundary film from synthetic magnesium silicon hydroxide additive (2017) (41)
Tribological properties of boric acid and boric-acid-forming surfaces: Part 2, Formation and self-lubrication mechanisms of boric acid films on boron- and boric-oxide-containing surfaces (1990) (40)
Electrochemical boriding and characterization of AISI D2 tool steel (2011) (39)
Development of ultrananocrystalline diamond (UNCD) coatings for multipurpose mechanical pump seals (2011) (39)
Insights into “near-frictionless carbon films” (2004) (38)
Tribological Behavior of NiAl-Layered Double Hydroxide Nanoplatelets as Oil-Based Lubricant Additives. (2017) (38)
Superlubricity of the DLC films-related friction system at elevated temperature (2015) (38)
Coating Technology for Vehicle Applications (2015) (38)
Quantification of oxygenated species on a diamond-like carbon (DLC) surface (2011) (38)
Correlation of interface structure with adhesive strength of ion-plated TiN hard coatings (1989) (37)
Top-surface characterization of a near frictionless carbon film (2007) (37)
Structure and tribological behaviour of nanoscale multilayer C/Cr coatings deposited by the combined steered cathodic arc/unbalanced magnetron sputtering technique (2003) (37)
Diamond-Like Carbon Films (2004) (37)
An analytical study of tribofilms generated by the interaction of ashless antiwear additives with ZDDP using XANES and nano-indentation (2015) (37)
Effect of copper addition on the temperature dependent reciprocating wear behaviour of CrN coatings (2007) (36)
Superlubricity of Polyalkylene Glycol Aqueous Solutions Enabled by Ultrathin Layered Double Hydroxide Nanosheets. (2019) (35)
The influence of irrigating solutions on the accuracy of the electronic apex locator facility in the Tri Auto ZX handpiece. (2007) (35)
Surface metallurgical and tribological characteristics of TiN-coated bearing steels (1988) (35)
Analysis of plastic deformation in diamond like carbon films–steel substrate system with tribological tests (2011) (34)
Bipolar tribocharging signal during friction force fluctuations at metal-insulator interfaces. (2014) (33)
Effect of different irrigant activation protocols on push-out bond strength (2015) (33)
Thermotropic polyesters: structure of oriented poly(p-oxybenzoate-co-p-phenylene isophthalate)s (1988) (33)
Formation and self-lubricating mechanisms of boric acid on borided steel surfaces (1995) (32)
Sliding Wear of Silicon Carbide—Titanium Boride Ceramic‐Matrix Composite (1993) (32)
Effects of nanoscale surface texture and lubricant molecular structure on boundary lubrication in liquid. (2013) (32)
Nano-texture for a wear-resistant and near-frictionless diamond-like carbon (2014) (31)
The detection of salivary minerals in smokers and non-smokers with chronic periodontitis by the inductively coupled plasma-atomic emission spectrophotometry technique. (2006) (30)
Tribological behavior of hard carbon coatings on steel substrates (2003) (30)
Is Ultra-Low Friction Needed to Prevent Wear of Diamond-Like Carbon (DLC)? An Alcohol Vapor Lubrication Study for Stainless Steel/DLC Interface (2011) (30)
Nano-structured carbide-derived carbon films and their tribology (2005) (29)
Fatigue resistant carbon coatings for rolling/sliding contacts (2016) (29)
In vitro evaluation of the dissolving effect of solvents on root canal sealers. (2003) (29)
Influence of process duration on structure and chemistry of borided low carbon steel (2010) (29)
Fractional Coverage Model for the Adsorption and Removal of Gas Species and Application to Superlow Friction Diamond-like Carbon* (2004) (28)
Investigation of Initial and Steady-State Sliding Behavior of a Nearly Frictionless Carbon Film by Imaging 2- and 3-D TOF-SIMS (2007) (27)
Effect of gutta-percha solvents on mineral contents of human root dentin using ICP-AES technique. (2004) (27)
Tribochemistry of Carbon Films in Oxygen and Humid Environments: Oxidative Wear and Galvanic Corrosion. (2016) (27)
Ion-beam-assisted deposition of silver films on zirconia ceramics for improved tribological behavior (1990) (26)
Solid lubrication of ceramic surfaces by IAD-silver coatings for heat engine applications (1990) (26)
Orthodontic movement of a horizontally fractured tooth: a case report. (2005) (26)
Iron‐Nanoparticle Driven Tribochemistry Leading to Superlubric Sliding Interfaces (2019) (25)
The boron oxide–boric acid system: Nanoscale mechanical and wear properties (1999) (25)
Crystal chemistry and solid lubricating properties of the monochalcogenides gallium selenide and tin selenide (1994) (25)
Rolling contact fatigue behavior of Cu and TiN coatings on bearing steel substrates (1985) (24)
Synthesis and Tribology of Carbide-Derived Carbon Films (2006) (24)
A Gas-Surface Interaction Model for Spatial and Time-Dependent Friction Coefficient in Reciprocating Contacts: Applications to Near-Frictionless Carbon (2005) (24)
Ion-assisted deposition of silver films on ceramics for friction and wear control (1989) (22)
Evaluation of DLC coatings for spark-ignited, direct-injected fuel systems (2004) (22)
An Overview of Superlubricity in Diamond-like Carbon Films (2008) (22)
Boron‐Based Solid Nanolubricants and Lubrication Additives (2008) (22)
Hysteresis and Related Error Mechanisms in the NIST Watt Balance Experiment (2001) (22)
Ultra-fast boriding of nickel aluminide (2011) (22)
Dry Lubricant Films for Aluminum Forming (1999) (21)
Plasma-Functionalized Polytetrafluoroethylene Nanoparticles for Improved Wear in Lubricated Contact. (2017) (21)
Synthesis and Tribology of Micro-Carbon Sphere Additives for Enhanced Lubrication (2015) (21)
Interaction of phosphonium ionic liquids with borate esters at tribological interfaces (2016) (21)
Tribological Performance of EP Lubricants with Phosphorus-Based Additives (2013) (21)
Near-surface characterization of amorphous carbon films by neutron reflectivity (2003) (20)
The Synergistic Effects of Solid and Liquid Lubrication on the Tribological Behavior of Transformation-Toughened ZrO2 Ceramics (1992) (20)
Antiwear Properties of Binary Ashless Blend of Phosphonium Ionic Liquids and Borate Esters in Partially Formulated Oil (No Zn) (2019) (19)
Tribological behavior of oil-lubricated, TiN-coated steel (1992) (19)
Effects of different chlorhexidine formulations on shear bond strengths of orthodontic brackets. (2009) (19)
Tribological Behavior of Oil-Lubricated Laser Textured Steel Surfaces in Conformal Flat and Non-Conformal Contacts (2017) (18)
Direct Observation of Tribochemically Assisted Wear on Diamond-Like Carbon Thin Films (2013) (18)
Interaction of plasma functionalized TiO2 nanoparticles and ZDDP on friction and wear under boundary lubrication (2019) (18)
Extreme Pressure Lubricant Additives Interacting on the Surface of Steel- and Tungsten Carbide–Doped Diamond-Like Carbon (2013) (18)
Micro-to-nano triboactivity of hydrogenated DLC films (2009) (17)
Friction reducing properties of onion-like carbon based lubricant under high contact pressure (2012) (17)
Quantification of sliding-induced phase transformation in N3FC diamond-like carbon films (2011) (17)
The effects of three different desensitizing agents on the shear bond strength of composite resin bonding agents. (2010) (17)
Nanocomposite Coatings for Severe Applications (2010) (17)
Tribological performance of ion-beam-mixed Fe/B multilayers on M50 steel☆ (1990) (17)
Deposition, characterization, and tribological applications of near-frictionless carbon films on glass and ceramic substrates (2006) (17)
New horizon in the tribology of diamondlike carbon films (2008) (16)
Superlubricity in Diamondlike Carbon Films (2007) (16)
Effect of surfactant on tribological performance and tribochemistry of boric acid based colloidal lubricants (2012) (16)
How to get noWear? – A new take on the design of in-situ formed high performing low-friction tribofilms (2020) (16)
Effect of film adhesion on tribological properties of silver-coated alumina (1990) (16)
Effect of the gutta-percha solvents on the microhardness and the roughness of human root dentine. (2004) (16)
Periodic ab initio calculations of orthoboric acid (2000) (16)
Energy Consumption Due to Friction in Motored Vehicles and Low-Friction Coatings to Reduce It (2015) (15)
Cross‐sectional transmission electron microscopy of the interfaces between physical vapor deposited TiNx coatings and steel substrates (1989) (15)
Characterization of ceramic films and interfaces by electron microscopic and spectroscopic techniques (1989) (15)
Catalytically Active Oil-based Lubricant Additives Enabled by Calcining Ni-Al Layered Double Hydroxides. (2019) (15)
The mechanical properties of freestanding near-frictionless carbon films relevant to MEMS (2006) (15)
Effect of different light sources in combination with a light-transmitting post on the degree of conversion of resin composite at different depths of simulated root canals. (2011) (14)
Energy and wear analysis in lubricated sliding contact (1996) (14)
Effect of Carbon Coating on Scuffing Performance in Diesel Fuels (2000) (14)
Dry and oil-lubricated sliding wear of Si3N4 and Si3N4/BN fibrous monoliths (2005) (14)
Ultralow Friction of ZrO2 Ball Sliding against DLC Films under Various Environments (2017) (14)
Effect of several laser systems on removal of smear layer with a variety of irrigation solutions (2018) (13)
Tribochemistry of fluorinated ZnO nanoparticles and ZDDP lubricated interface and implications for enhanced anti-wear performance at boundary lubricated contacts (2021) (13)
Mechanism of Superlubricity Conversion with Polyalkylene Glycol Aqueous Solutions. (2019) (13)
Near-frictionless carbon coatings for use in fuel injectors and pump systems operating with low-sulfur diesel fuels (2000) (12)
Effect of niobium interlayer on high-temperature sliding friction and wear of silver films on alumina (1996) (12)
A study of surface metallurgical characteristics of tin coated bearing steels (1986) (12)
Compositionally graded SiCu thin film anode by magnetron sputtering for lithium ion battery (2015) (12)
An Industrial Dental-Erosion by Chromic Acid: A Case Report (2007) (12)
Annealing effects on the mechanical properties of near-frictionless carbon thin films (2006) (12)
Tribochemical Conversion of Methane to Graphene and Other Carbon Nanostructures: Implications for Friction and Wear (2020) (12)
Temperature and water vapor pressure effects on the friction coefficient of hydrogenated diamondlike carbon films. (2009) (12)
High energy (MeV) ion beam modifications of sputtered MoS2 coatings on sapphire (1991) (11)
Scuffing Performance of Amorphous Carbon During Dry-Sliding Contact (2001) (11)
Robust Interfacial Tribofilms by Borate- and Polymer-Coated ZnO Nanoparticles Leading to Improved Wear Protection under a Boundary Lubrication Regime. (2021) (11)
Structured SiCu thin films in LiB as anodes (2014) (10)
Self-lubricating boric acid films for tribological applications (1990) (10)
Nucleation and growth mechanisms in ion-plated TiN films on steel substrates (1990) (10)
CLEAN AND COST-EFFECTIVE DRY BOUNDARY LUBRICANTS FOR ALUMINUM FORMING (1998) (9)
High-Performance Heterocyclic Friction Modifiers for Boundary Lubrication (2018) (9)
Investigation of Nano-Mechanical and- Tribological Properties of Hydrogenated Diamond Like Carbon (DLC) Coatings (2017) (9)
Effect of temporary filling materials on repair bond strengths of composite resins. (2008) (9)
Nano-Tribological and Wear Behavior of Boric Acid Solid Lubricant© (1999) (9)
Effect of metallic-coating properties on the tribology of coated and oil-lubricated ceramics (1994) (9)
The effect of laser texturing of steel surface and speed-load parameters on lubrication regime transition from boundary to hydrodynamic. (2003) (8)
Comparison of Neurokinin A, Substance P, Interleukin 8, and Matrix Metalloproteinase-8 Changes in Pulp tissue and Gingival Crevicular Fluid Samples of Healthy and Symptomatic Irreversible Pulpitis Teeth (2020) (8)
Superlubricity and Wearless Sliding in Diamondlike Carbon Films (2001) (8)
High Energy (MeV) Ion Beam Modifications of Sputtered MoS2 Coatings on Ceramics (1993) (8)
Carbon-hydrogen bonding in near-frictionless carbon (2008) (8)
Characterization of transfer layers on steel surfaces sliding against diamondlike carbon in dry nitrogen (1995) (8)
Tribological performance of quaternary CrSiCN coatings under dry and lubricated conditions (2017) (8)
Surface Damage and Wear Mechanisms of Amorphous Carbon Coatings under Boundary Lubrication Conditions (2003) (7)
Sliding Friction and Wear of Ceramics With and Without Soft Metallic Films (1991) (7)
Assessment of Amorphous Carbon Coating for Artificial Joints Application (2005) (7)
Diamondlike Carbon Films: A Historical Overview (2008) (7)
Microfabrication issues in constructing freestanding membranes of near-frictionless carbon and diamond-like films (2007) (7)
Tribology of Diamond and Diamond‐Like Carbon Films (2014) (7)
Restoration of tooth fractures using fiber post and fragment reattachment: Three case reports (2012) (7)
Electrochemical boriding of molybdenum in molten borax (2015) (6)
Friction and Wear Reduction Mechanism of Polyalkylene Glycol-Based Engine Oils (2018) (6)
The role of soft (metallic) films in the tribological behavior of ceramic materials (1991) (6)
Acid Treatment of Diamond-Like Carbon Surfaces for Enhanced Adsorption of Friction Modifiers and Friction Performance (2018) (6)
Combined solid and liquid lubrication of silicon nitride under boundary conditions (1992) (6)
Achieving Ultralow Friction and Wear by Tribocatalysis: Enabled by In-Operando Formation of Nanocarbon Films. (2021) (6)
Si3N4/BN fibrous monoliths: Mechanical properties and tribological responses (2005) (6)
Effect of the addition of Si into V2O5 coatings: Structure and tribo-mechanical properties (2018) (6)
Engine Friction and Wear Performances with Polyalkylene Glycol Engine Oils (2016) (6)
Synthetic Lubricants Derived from Plastic Waste and their Tribological Performance. (2021) (6)
Friction and wear performance of low-friction carbon coatings under oil lubrication. (2002) (5)
Ion-beam-assisted surface modifications for friction and wear reduction (1992) (5)
Guest editorial: Special issue on superlubricity (2014) (5)
Does chlorhexidine affect the shear bond strengths of orthodontic brackets (2011) (5)
Effect of Coating Thickness on Tribological Performance of CrN in Dry Sliding Contact (2012) (5)
Boundary film for structural ceramic materials (1993) (5)
Investigation of Shear-Thinning Behavior on Film Thickness and Friction Coefficient of Polyalphaolefin Base Fluids with Varying Olefin Copolymer Content (2017) (5)
Ion-assisted deposition of high-temperature lubricous surfaces (1991) (4)
Effect of solvent use on postoperative pain in root canal retreatment: a randomized, controlled clinical trial (2019) (4)
Tribology of Nanostructured and Composite Coatings (2006) (4)
Superlow-friction carbon films for fuel system components operating in low-sulfur diesel fuels. (2001) (4)
Tribological Characterization of Carbide-Derived Carbon (CDC) Films in Dry and Humid Environments (2003) (4)
Rolling-contact fatigue resistance of hard coatings on bearing steels. (1999) (4)
The effect of different irrigation solutions and activation techniques on the expression of growth factors from dentine of extracted teeth. (2021) (4)
Tribological Characterization of Carbide-Derived Carbon Layers on Silicon Carbide for Dry Friction Applications (2004) (4)
EVALUATION OF DLC COATINGS FOR FOIL BEARING APPLICATIONS (2007) (4)
GLOBAL IMPACT OF FRICTION ON ENERGY USE IN TRANSPORTATION AND INDUSTRY (2014) (4)
Corrosion behavior of TiN Ion Plated M-50 Bearing Steel (1985) (3)
Comparison of NKA, SP, IL-8, MMP-8 Changes in Pulp tissue and GCF Samples of Healthy and Acute Irreversible Pulpitis Teeth. (2020) (3)
Performance Evaluation of Half-Wetted Hydrodynamic Bearings With DLC Coated Surfaces (2007) (3)
Wear of diamond and diamondlike carbon films. (2002) (3)
Comparison of dentin penetration ability of different root canal sealers used with different obturation methods (2020) (3)
Large-scale Manufacturing of Nanoparticulate-based Lubrication Additives for Improved Energy Efficiency and Reduced Emissions (2013) (3)
Tuning friction atom-by-atom in an ion-crystal simulator (2015) (3)
Raman Chemical Imaging of Tribological Surfaces (2002) (3)
Research Workshop Tribology Issues in Biology and Medicine (2003) (3)
Tribological Interaction of Plasma-Functionalized CaCO3 Nanoparticles with Zinc and Ashless Dithiophosphate Additives (2021) (3)
Friction Mechanisms and Fundamental Aspects in Solid Lubricant Coatings (2006) (3)
Ultra-fast boriding for improved efficiency and reduced emissions in materials processing industries (2012) (3)
Development of Modified Pag (Polyalkylene Glycol) High VI High Fuel Efficient Lubricant for LDV Applications (2015) (3)
X-Ray Studies of Near-Frictionless Carbon Films. (2004) (3)
New Materials and Coatings for Superlubricity and Near-Wearless Sliding (2007) (3)
Science and technology of ultrananocrystalline diamond (UNCD) thin films for multifunctional devices (2000) (3)
Complementary neutron and x-ray reflectivity studies of “near-frictionless” carbon films (2007) (3)
Effect of post‐deposition annealing on structure and chemistry of the TiN film/steel substrate interfaces (1991) (3)
Friction and wear behavior of near-frictionless carbon coatings in formulated gasolines (2003) (3)
Low-Friction Materials and Coatings (2015) (2)
Peer-reviewed Paper (2005) (2)
Progress in Superlubricity Across Different Media and Material Systems—A Review (2022) (2)
Friction-induced structural transformations of DLC coatings under different atmospheres. (2002) (2)
22 Solid Lubricants and Self-Lubricating Films * (2001) (2)
Diamond-like carbon films and their superlubricity (2021) (2)
Cross-sectional transmission electron microscopy study of phase transformations at TiN film/steel substrate interfaces (1991) (2)
PROPERTIES OF NANOCRYSTALLINE DIAMOND FILMS (1999) (2)
Tribochemistry and Wear Life Improvement in Liquid-Lubricated H-DLC-Coated Bearings (2007) (2)
High-Temperature Durability and Tribological Performance of Diamond and Diamondlike Carbon Films (1997) (2)
Superlubricity and Near-Wearless Sliding in Carbon Films (2005) (2)
Boride-Carbon Hybrid Technology for Ultra-Wear and Corrosive Conditions (2021) (2)
Tribological Behavior of Near-Frictionless Carbon Coatings in High- and Low- Sulfur Diesel Fuels (2000) (1)
Water Lubricated Sliding Wear of Si3N4/BN Fibrous Monoliths (2005) (1)
Silane Treatment of Diamond-Like Carbon: Improvement of Hydrophobicity, Oleophobicity, and Humidity Tolerance of Friction (2016) (1)
Comparative Tribological Behavior of TiN-, CrN-, ZrN-, and MoN -Cu Based Nanocomposite Coatings (2005) (1)
Boundary Lubrication of Ceramic Materials by Soft Metallic Coatings and Synthetic Oil (1992) (1)
Design of Novel Nanocomposite Nitride Coatings for Severe Tribological Applications (2010) (1)
Low-Friction Coatings for Air Bearings in Fuel Cell Air Compressors (2000) (1)
Structure, property and performance characteristics of HCD-ion plated TiN coatings (1989) (1)
Adhesion and Tribological Properties of Ag and Ag/Ti Films on Zro 2 Ceramic Substrates After Heat Treatment at 250°C (1991) (1)
Effects of 0 . 2 % Chlorhexidine Gluconate to the Plaque Accumulation on Silk Suture Materials in Oral Mucosa : A Scanning Electron Microscope Study (2007) (1)
Performance of Amorphous Carbon Coating in Turbocompressor Air Bearings (2002) (1)
Solid lubrication of ceramic sufraces by IAD (ion-assisted deposition)-silver coatings for heat engine applications (1989) (1)
Antibacterial and antifungal activity of an MTA-Based root canal sealer versus epoxy resin-based and methacrylate resin-based sealers (2020) (1)
Amorphous Carbon Thin Films for Interfaces in MEMS (2005) (1)
Effect of thin-film coating on wear in EGR-contaminated oil. (2002) (1)
Ion-beam mixing of Fe/B layers for tribological applications (1990) (1)
Quanti fi cation of sliding-induced phase transformation in N 3 FC diamond-like carbon fi lms (2011) (1)
Synthesis of superlow friction carbon films from hydrogen-rich acetylene plasmas. (2002) (1)
Thermotropic polyesters: synthesis and properties of modified poly(4-oxybenzoate-co-1,4-phenylene isophthalate)s (1995) (1)
Tribochemistry of Multiply Alkylated Cyclopentane Oils on Diamond-like Carbon (DLC) Coated Thrust Bearings (2008) (1)
Depth-dependent defect and residual stress distribution in magnetron sputtered MoN:Cu nanocomposite films by x-ray microdiffraction (2006) (1)
Synergistic effects of silver films and synthetic lubricants on boundary-lubrication behavior of ceramics (1992) (0)
Applications of ion beam processes in tribology (1989) (0)
EFFECT OF SOURCE GAS CHEMISTRY ON TR.H30LOGICAL PERFORMANCE OF DLAMOND-LTKE CARBON FILMS* (2000) (0)
Eliminating friction at the nanoscale (2019) (0)
F. Laser Texturing of Propulsion Materials (2005) (0)
Graphene-based superlubricity for macroscale applications (2018) (0)
Uses of ion bombardment in thin-film deposition (1990) (0)
Final Report for U.S. Department of Energy Fuels & Lubricants Project on Lubricant Technology - Innovation, Discovery, Design, and Engineering (2018) (0)
Improved lubrication from a mixture of boric acid with oils and fats. (1993) (0)
Friction of Diamond-Like Carbon (2007) (0)
A time dependent fractional coverage model for the adsorption and removal of gas species and application to the friction behavior of superlow friction DLC. (2002) (0)
Chemical Characterization of Tribological and Biomaterial Surfaces With Nanoscale Spatial Resolution (2011) (0)
Evaluation of Near Frictionless Carbon Coatings Using Four-Ball Wear Tester (2005) (0)
Inside Back Cover: Bipolar Tribocharging Signal During Friction Force Fluctuations at Metal–Insulator Interfaces (Angew. Chem. Int. Ed. 45/2014) (2014) (0)
Tribochemistry and Lubricity of Vegetable Based Colloidal Lubricants Under Severe Tribological Conditions IJTC2010-41242 (2010) (0)
High temperature friction and wear characteristics of superalloys X-750 and 188 for use in low heat rejection engines (1988) (0)
fwL / Er / cp-7714 y TRIBOLOGICAL BEHAVIOR OF NEAR-FRICTIONLESS CARBON COATINGS IN HIGH-ANI ) LOW-SULFUR DIESEL FUELS * (2000) (0)
Mandibular second premolar with four roots (2012) (0)
Cross-sectional transmission electron microscopy of the interfaces between PVD TiNx coatings and steel substrates (1988) (0)
KALSİYUM HİDROKSİTİN ENDODONTİDEKİ KULLANIM ALANLARI [Calcium Hydroxide in Endodontics] (2011) (0)
Paper XVII (i) Ion-Beam-Assisted Deposition of Adherent Lubricious Coatings on Ceramics (1991) (0)
Graphene: Extraordinary Macroscale Wear Resistance of One Atom Thick Graphene Layer (Adv. Funct. Mater. 42/2014) (2014) (0)
In vitro evaluation of the accuracy of Two electronic apex locators in primary teeth (2010) (0)
Discussion: “Tribological Studies of Ion-Implanted Steel Constituents Using an Oscillating Pin-on-Disk Wear Tester” (Wei, R., Wilbur, P. J., Sampath, W. S., Williamson, D. L., Qu, Yi, and Wang, Li, 1990, ASME J. Tribol., 112, pp. 27–34) (1990) (0)
Editorial: 2D-Layered Nanomaterials: Chemical Functionalization, Advanced Characterization, and Tribological Properties (2022) (0)
A Novel Lubricant Formulation Scheme for 2% Fuel Efficiency Improvement. EE0006449_Final Technical Report (2018) (0)
Working length determination methods in endodontics (2018) (0)
Nanoscale Tribological Properties of Boric Acid Films on Boric Oxide Substrates (1998) (0)
A surface analytical study of the effects of water and oxygen on tribological behavior of DLC films. (2005) (0)
Solid Tribological Materials and Coatings (2000) (0)
Synthesis and tribology of super-low-friction-coefficient (0.001) carbon films. (2001) (0)
Comparison of various irrigation activation procedures after post space preparation on push-out bond strength of fiber posts: an in vitro study (2021) (0)
Novel Carbon Films for Next Generation Rotating Equipment Applications (2006) (0)
Effect of Carbon Coating on Scuffing of Steel Surfaces during Oil Lubrication (2002) (0)
Innenrücktitelbild: Bipolar Tribocharging Signal During Friction Force Fluctuations at Metal–Insulator Interfaces (Angew. Chem. 45/2014) (2014) (0)
Panel 3 - characterization (1993) (0)
Recent progress and future prospects in the surface engineering and tribology of ceramics (1994) (0)
Effect of metallic coating properties on the tribology of oil- lubricated coated-ceramics (1992) (0)
Hydrogen embrittlement susceptibility of cold drawn plain carbon steel wires (1982) (0)
Electrification effects on dry and lubricated sliding wear of bearing steel interfaces (2022) (0)
Near-frictionless carbon coatings for spark-ignited direct-injected fuel systems. Final report, January 2002. (2002) (0)
Correction to "Mechanism of Superlubricity Conversion with Polyalkylene Glycol Aqueous Solutions". (2019) (0)
Endodonti ’ de Mineral Trioksit Aggregate Mineral Trioxide Aggregate in Endodontics (2015) (0)
Effect of different irrigation activation techniques on irrigation penetration into the simulated lateral canals. (2022) (0)
ION IMPLANTATION AND PLATING TO IMPROVE HARDNESS, WEAR AND ROLLING CONTACT FATIGUE BEHAVIOR OF BEARING STEELS (2010) (0)
Tribological behavior of silver films prepared on ceramic surfaces by ion-beam-assisted deposition (1991) (0)
Tribological performance of NFC coatings under oil lubrication[Near Frictionless Carbon] (2000) (0)
SUPERLUBRICITY IN CARBON FILMS (2002) (0)
Cover Feature: Synthetic Lubricants Derived from Plastic Waste and their Tribological Performance (ChemSusChem 19/2021) (2021) (0)
Tribology of Diamond-Like Carbon : a Review (2007) (0)
Comparing the Young's Modulus of Near-Frictionless Carbon Films Obtained From Different Methods (2006) (0)
Assessment of Undergraduate Dentistry Students' Experiences and Self-Confidence Levels During Endodontic Treatment: A Cross-Sectional Survey Study (2022) (0)
Superhard and Low Friction Nanocomposite Coatings: Design, Synthesis, and Applications (2009) (0)
Advanced Engine and Fuel Technologies Annual Progress Report (FY2019) (2020) (0)
Effect of solvent use on postoperative pain in root canal retreatment: a randomized, controlled clinical trial (2019) (0)
Farkli Bonding Sistemlerin Kompozit Bezinin Amalgama Bağlanma Dayanimi Üzerine Etkisi Effect of Different B onding System s on Shear Bond Strength of Com posite Resin Bonded to Am algam (2005) (0)
High-temperature tribological characteristics of silver and gold coatings on ceramics prepared by ion-beam-assisted deposition (1992) (0)
Short and Medium Range Order in Hydrogenated Diamond-Like Carbon Films (2007) (0)
MEMS lubrication with alcohol vapour (2010) (0)
Internal Root Resorptions and Treatment Approaches (2021) (0)
A Pin-on-Disc Study on the Electrified Sliding Wear of EVs Powertrain Gears (2022) (0)
IV.H.9 Low-Friction Coatings and Materials for Fuel Cell Air Compressors (2003) (0)
XANES Study of Tribofilm Formation With Low Phosphorus Additive Mixtures of Phosphonium Ionic Liquid and Borate Ester (2021) (0)
Scuffing Resistance of Laser Textured Surfaces (2005) (0)
Effect of Tribochemical Interactions on Friction and Wear of Highly Hydrogenated DLC Films (2007) (0)
Development of lubricious coatings for advanced turbine engine applications (1996) (0)
Tribological Behavior of Oil-Lubricated Laser Textured Surfaces in Conformal Flat and Point Contacts (2005) (0)
Pages 7-10 In Vitro Evaluation of the Accuracy of Two Electronic Apex Locators in the Primary Teeth (2010) (0)
Erratum to Comparison of Neurokinin A, Substance P, Interleukin 8, and Matrix Metalloproteinase-8 Changes in Pulp tissue and Gingival Crevicular Fluid Samples of Healthy and Symptomatic Irreversible Pulpitis Teeth [J Endod 46 (2020) 1428-1437]. (2021) (0)
Ion-beam mixing of Fe/B layers for triboligical applications (1991) (0)
Endurance test of near frictionless carbon coatings using four ball wear tester. (2005) (0)
An overview on superlubricity in diamondlike carbon films (2008) (0)
Tribology and surface engineering at Argonne National Laboratory (1996) (0)
Transient Behavior of Near Frictionless Carbon Films in Reciprocating Microtribometery in Low Humidity Inert Environments (2005) (0)
Effect of synthetic lubricants on tribological properties of surface-modified ceramics (1991) (0)

This paper list is powered by the following services:

Other Resources About Ali Erdemir

en.wikipedia.org

What Schools Are Affiliated With Ali Erdemir?

Ali Erdemir is affiliated with the following schools:

Ali Erdemir's AcademicInfluence.com Rankings

Image Attributions

Image Source for Ali Erdemir